FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Generic / No Brand

XT30 to XT60 Adapter - Cabled or Solid

WREKD General

A simple yet useful XT30 (Male) to XT60 (Female) adapter, with or without a cable.
The cabled version is length 100mm and 18AWG cable
Check out our other tools and building supplies!
Includes 

1 x XT30 to XT60 Adapter 


Upgrade your FPV drone with our XT30 to XT60 Adapter! Perfect for racing, freestyle, cinema, and long-range flights. Get yours now!

XT30 to XT60 Adapter - Cabled or Solid from WREKD Co.

Banana Plug to XT60 or XT30 for Lipo Battery Chargers

This adapter cable goes from XT60 or XT30 to male brass banana plugs. These are great for smaller single battery chargers that have positive and negative female banana plug output.  
Specifications:

Banana Plug: 4mm
Length: 235 or 180mm
Wire: 16AWG
Connector: XT60 or XT30

Includes:


1 x Banana Plug to XT60 or XT30 for Lipo Battery Chargers 



This adapter cable goes from XT60 or XT30 to male brass banana plugs. These are great for smaller single battery chargers that have positive and negative female banana plug output.   Specifications: Banana Plug: 4mm Length: 235 or 180mm Wire: 16AWG Connector: XT60 or XT30 Includes: 1 x Banana Plug to XT60 or XT30 for L

Banana Plug to XT60 or XT30 for Lipo Battery Chargers - Choose Version from WREKD Co.

Banana Plug to XT60 or XT30 for Lipo Battery Chargers - Choose Version

FPVELITE

This adapter cable goes from XT60 or XT30 to male brass banana plugs. These are great for smaller single battery chargers that have positive and negative female banana plug output.  
Specifications:

Banana Plug: 4mm
Length: 235 or 180mm
Wire: 16AWG
Connector: XT60 or XT30

Includes:


1x Banana Plug to XT60 or XT30 for Lipo Battery Chargers 



This adapter cable goes from XT60 or XT30 to male brass banana plugs. These are great for smaller single battery chargers that have positive and negative female banana plug output.   Specifications: Banana Plug: 4mm Length: 235 or 180mm Wire: 16AWG Connector: XT60 or XT30 Includes: 1x Banana Plug to XT60 or XT30 for Li

ToolkitRC

ToolKitRC M7 200W 10A 2-6S DC Smart Charger & Diagnostic Tool

The ToolkitRC M7 is a 200W multifunctional balance charger with 33.3% more power than the M6. With its IPS wide-angle display and simplified interface, this charger is ideal for outdoor viewing. 

The ToolkitRC M7 is a 200W multifunctional balance charger with 33.3% more power than the M6. With its IPS wide-angle display and simplified interface, this charger is ideal for outdoor viewing. The scroll wheel allows for better control for yea

ToolkitRC M7 200W 10A 2-6S DC Multifunctional Balance Charger

ToolKitRC

All the multi-functionality you've come to expect from a ToolkitRC charger, in a more compact package!Works great with ADP-100 or ADP-180 power supplies. 
Features

Same size as M6 with 33.3% more power
Bright 2" 32x240 IPS wide angle display
Long life scroll wheel sensor
New simplified interface
Small size, many functions:

Balance charge
Electrical measurement
Signal source
Drone charge
Signal testing


Specifications
Charger

Input Voltage: 7.0-28.0V @MAX 12A
Battery Type: Lipo LiHV LiFe Lion@1-6S , NiMh @1-16S Pb @1-10S
Balance current: 400mA @2-6S
Charger power: 200W @MAX 10A
Discharge power: 200W @MAX 10A Recycle mode, 10W@3A Normal mode
USB: 2.1A @5.0V

Measurement

PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Voltage: 1.0-5.0V @1-6S
Internal resistance: 1-99mR @1-6S
ESC: 200W@10A PWM Output

Output

PWM: 500-2500us @20-1000Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Power supply: 1.0-28.0V @1.0-10A mode:CC+CV
OverCurrent Cutoff time: &lt5ms

Includes

1x M7 200W DC Smart Charger


All the multi-functionality you've come to expect from a ToolkitRC charger, in a more compact package!Works great with ADP-100 or ADP-180 power supplies.  Features Same size as M6 with 33.3% more power Bright 2" 32x240 IPS wide angle display Long life scroll wheel sensor New simplified interface Small size, many functi

M7 200W 1-6S DC Smart Charger

All the multi-functionality you've come to expect from a ToolkitRC charger, in a more compact package!Works great with ADP-100 or ADP-180 power supplies.  Features Same size as M6 with 33.3% more power Bright 2" 32x240 IPS wide angle display Long life scroll wheel sensor New simplified interface Small size, many functions: Balance charge Electrical measurement Signal source Drone charge Signal testing Specifications Charger Input Voltage: 7.0-28.0V @MAX 12A Battery Type: Lipo LiHV LiFe Lion@1-6S , NiMh @1-16S Pb @1-10S Balance current: 400mA @2-6S Charger power: 200W @MAX 10A Discharge power: 200W @MAX 10A Recycle mode, 10W@3A Normal mode USB: 2.1A @5.0V Measurement PWM: 880-2200us @20-400Hz PPM: 880-2200us*8CH @20-50Hz SBUS: 880-2200us*16CH @20-100Hz Voltage: 1.0-5.0V @1-6S Internal resistance: 1-99mR @1-6S ESC: 200W@10A PWM Output Output PWM: 500-2500us @20-1000Hz PPM: 880-2200us*8CH @20-50Hz SBUS: 880-2200us*16CH @20-100Hz Power supply: 1.0-28.0V @1.0-10A mode:CC+CV OverCurrent Cutoff time:

The ToolkitRC M7 has been reinvented and is better than ever!This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 AC is the same size as its predecessor and is 33% more powerful with a max output of 200W and 15A! Now including ToolkitRC&#39s dual sliding connector doors which allow you to switch from XT30 to XT60 in a flash!!
Check out all our chargers and charging accessories and our selection of ToolkitRC products!
Features

Battery Charger
Cell Checker
Servo Tester
PWM, PPM.SBUS Input/output &ampamp Receiver tester
Viable AMP/volt DC Power supply (Required external DC input
Lithium battery cut-off voltage can be set (TVC function)
Measure battery voltage, internal resistance, balance
Measure PWM / PPM / xBUS signal values, Accuracy 1ms
Output PWM / PPM / xBUS standard signal, Accuracy 1ms
Customizable 1-28V constant voltage, 1-10A constant current
Charge the drone battery, activate and charge.
Multi-language optional
USB 2.1A@5.0V Output，for Mobile devices


Specifications



LCD: IPS  2.0inch 
LCD: 320*240 Pixel
Input voltage: 7.0-28.0V  @MAX 12A
Input voltage: AC 100-240V MAX 100W 1.5A
Type of battery: 

Lipo  LiHV  LiFe Lion@1-6
NiMh @1-16S   Pb @1-10S

Balance current: 400mA @2-6S
Charger power: 
200W @MAX 15A
Discharge power: 

200W  @MAX 10A Recycle mode
10W@3A Normal mode

USB: 2.1A @5.0V or Upgrade
Product size: 112x72*38 mm
Product weight: 245g
Pack size: 144x73x38mm
Pack weight: 380g


Input


PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Voltage: 1.0-5.0V @1-6S
Internal resistance: 1-99mR @1-6S
ESC: 200W@10A       PWM Output


Output


PWM: 500-2500us @20-1000Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Power supply: 1.0-28.0V  @1.0-10A  mode:CC+CV
OverCurrent Cutoff time: &amplt5ms

Includes

1x ToolKitRC M7 200W 10A 1-6S DC Smart Charger &ampamp Diagnostic Tool



The ToolkitRC M7 has been reinvented and is better than ever!This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 AC is the same size as its predecessor and is 33% more powerful with a max output of 200W and 15A! Now including ToolkitRC's dual slid

ToolKitRC M7 AC 200W 15A 2-6S DC Smart Charger with XT60 & XT30 Plug from WREKD Co.

ToolKitRC M7 AC 200W 15A 2-6S DC Smart Charger with XT60 & XT30 Plug

The ToolkitRC M6 has been reinvented and is better than ever!This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 is the same size as its predecessor and is 33% more powerful with a max output of 200W and 10A!
Check out all our chargers and charging accessories and our selection of ToolkitRC products!

Features

Battery Charger
Cell Checker
Servo Tester
PWM, PPM.SBUS Input/output &ampamp Receiver tester
Viable AMP/volt DC Power supply (Required external DC input
Lithium battery cut-off voltage can be set (TVC function)
Measure battery voltage, internal resistance, balance
Measure PWM / PPM / xBUS signal values, Accuracy 1ms
Output PWM / PPM / xBUS standard signal, Accuracy 1ms
Customizable 1-28V constant voltage, 1-10A constant current
Charge the drone battery, activate and charge.
Multi-language optional
USB 2.1A@5.0V Output，for Mobile devices


Specifications



LCD: IPS  2.0inch 
LCD: 320*240 Pixel
Input voltage: 7.0-28.0V  @MAX 12A
Type of battery: 

Lipo  LiHV  LiFe Lion@1-6
NiMh @1-16S   Pb @1-10S

Balance current: 400mA @2-6S
Charger power: 
200W @MAX 10A
Discharge power: 

200W  @MAX 10A Recycle mode
10W@3A Normal mode

USB: 2.1A @5.0V or Upgrade
Product size: 73*51*27 mm
Product weight: 90g
Pack size: 84*79*39 mm
Pack weight: 150g


Input


PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Voltage: 1.0-5.0V @1-6S
Internal resistance: 1-99mR @1-6S
ESC: 200W@10A       PWM Output


Output


PWM: 500-2500us @20-1000Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Power supply: 1.0-28.0V  @1.0-10A  mode:CC+CV
OverCurrent Cutoff time: &amplt5ms

Includes

1x ToolKitRC M7 200W 10A 1-6S DC Smart Charger &ampamp Diagnostic Tool



The ToolkitRC M6 has been reinvented and is better than ever!This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 is the same size as its predecessor and is 33% more powerful with a max output of 200W and 10A! Check out all our chargers and chargin

ToolKitRC M7 200W 10A 2-6S DC Smart Charger & Diagnostic Tool from WREKD Co.

TOOLKITRC

The ToolkitRC M6 has been reinvented and is better than ever!This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 is the same size as its predecessor and is 33% more powerful with a max output of 200W and 10A!
Check out all our chargers and charging accessories and our selection of ToolkitRC products!

Features

Battery Charger
Cell Checker
Servo Tester
PWM, PPM.SBUS Input/output &amp Receiver tester
Viable AMP/volt DC Power supply (Required external DC input
Lithium battery cut-off voltage can be set (TVC function)
Measure battery voltage, internal resistance, balance
Measure PWM / PPM / xBUS signal values, Accuracy 1ms
Output PWM / PPM / xBUS standard signal, Accuracy 1ms
Customizable 1-28V constant voltage, 1-10A constant current
Charge the drone battery, activate and charge.
Multi-language optional
USB 2.1A@5.0V Output，for Mobile devices


Specifications



LCD: IPS  2.0inch 
LCD: 320*240 Pixel
Input voltage: 7.0-28.0V  @MAX 12A
Type of battery: 

Lipo  LiHV  LiFe Lion@1-6
NiMh @1-16S   Pb @1-10S

Balance current: 400mA @2-6S
Charger power: 
200W @MAX 10A
Discharge power: 

200W  @MAX 10A Recycle mode
10W@3A Normal mode

USB: 2.1A @5.0V or Upgrade
Product size: 73*51*27 mm
Product weight: 90g
Pack size: 84*79*39 mm
Pack weight: 150g


Input


PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Voltage: 1.0-5.0V @1-6S
Internal resistance: 1-99mR @1-6S
ESC: 200W@10A       PWM Output


Output


PWM: 500-2500us @20-1000Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Power supply: 1.0-28.0V  @1.0-10A  mode:CC+CV
OverCurrent Cutoff time: &lt5ms

Includes

1x ToolKitRC M7 200W 10A 1-6S DC Smart Charger &amp Diagnostic Tool



The ToolkitRC M6 has been reinvented and is better than ever!

ToolKitRC M7 200W 10A 2-6S DC Smart Charger & Diagnostic Tool - For Sale at RaceDayQuads

The ToolkitRC M7 has been reinvented and is better than ever!This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 AC is the same size as its predecessor and is 33% more powerful with a max output of 200W and 15A! Now including ToolkitRC's dual sliding connector doors which allow you to switch from XT30 to XT60 in a flash!!
Check out all our chargers and charging accessories and our selection of ToolkitRC products!
Features

Battery Charger
Cell Checker
Servo Tester
PWM, PPM.SBUS Input/output &amp Receiver tester
Viable AMP/volt DC Power supply (Required external DC input
Lithium battery cut-off voltage can be set (TVC function)
Measure battery voltage, internal resistance, balance
Measure PWM / PPM / xBUS signal values, Accuracy 1ms
Output PWM / PPM / xBUS standard signal, Accuracy 1ms
Customizable 1-28V constant voltage, 1-10A constant current
Charge the drone battery, activate and charge.
Multi-language optional
USB 2.1A@5.0V Output，for Mobile devices


Specifications



LCD: IPS  2.0inch 
LCD: 320*240 Pixel
Input voltage: 7.0-28.0V  @MAX 12A
Input voltage: AC 100-240V MAX 100W 1.5A
Type of battery: 

Lipo  LiHV  LiFe Lion@1-6
NiMh @1-16S   Pb @1-10S

Balance current: 400mA @2-6S
Charger power: 
200W @MAX 15A
Discharge power: 

200W  @MAX 10A Recycle mode
10W@3A Normal mode

USB: 2.1A @5.0V or Upgrade
Product size: 112x72*38 mm
Product weight: 245g
Pack size: 144x73x38mm
Pack weight: 380g


Input


PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Voltage: 1.0-5.0V @1-6S
Internal resistance: 1-99mR @1-6S
ESC: 200W@10A       PWM Output


Output


PWM: 500-2500us @20-1000Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Power supply: 1.0-28.0V  @1.0-10A  mode:CC+CV
OverCurrent Cutoff time: &lt5ms

Includes

1x ToolKitRC M7 200W 10A 1-6S DC Smart Charger &amp Diagnostic Tool



Battery Tool Type

XT60 Female to XT30 Male Adapter

GetFPV Affiliate

This handy XT60 Female to XT30 Male adapter allows you to use XT60 charge ports to charge XT30 batteries.

This handy adapter allows you to adapt your charger or drone to use the power connector you want.
Specifications

Connection type: XT60 Female to XT30 Male 
Length: 1.3

XT60 Male to XT30 Female Adapter

This handy XT60 Male to XT30 Female adapter allows you to use XT60 charge ports to charge XT30 batteries.

This handy adapter allows you to adapt your charger or drone to use the power connector you want.
Specifications

Connection type: XT60 Male to XT30 Female 
Length: 1.25

XT60 to XT30 Adapter

A simple handy adapter available in two different variants to cover multiple applications. Check out the rest of our connectors and charge leads! XT60 Female to XT30 Male can be used to convert XT60 charge ports to be able to charge XT30 batteries. XT60 Male to XT30 Female can be used to convert your XT30 equipped dron

XT60 to XT30 Adapter (1PC) - Choose Type

8cm XT60 Female to XT30 Male Cable Adapter

This handy XT60 Female to XT30 Male cable adapter allows you to use XT60 charge ports to charge XT30 batteries.

This handy cable adapter allows you to adapt your charger or drone to use the power connector you want.
Specifications

Connection type: XT60 Female to XT30 Male
Wire Guage: 16AWG
Cable Length: 80mm (8cm)
Adapter Width: 16mm

Includes

1x&n

8cm XT60 Male to XT30 Female Cable Adapter

This handy cable adapter allows you to use XT60 charge ports to charge XT30 batteries.

This handy cable adapter allows you to adapt your charger or drone to use the power connector you want.
Specifications

Connection type: XT60 Male to XT30 Female 
Wire Guage: 16AWG
Cable Length: 80mm (8cm)
Adapter Width: 16mm



ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60

ToolKitRC M4AC 30W 2.5A Compact AC Balance Charger - XT60

The ToolKitRC M4AC 30W Compact Balance Charger (XT30) is a small lithium battery balance charger that has excellent performance! Compare to similar products, the power performance of the M4AC is increased by 33%-66%. The display features IPS full vie

The ToolKitRC M4AC 30W Compact Balance Charger (XT30) is a small lithium battery balance charger that has excellent performance! Compare to similar products, the power performance of the M4AC is increased by 33%-66%.

ToolKitRC M4AC 30W 2.5A Compact AC Balance Charger - XT30

Specifications

Input: AC100-240V@MAX30W
Battery Type: LiPo LiHV LiFe @1-4S
Charging Power: 0.5-2.5A@25W
Bal Cur. : 200mA @2-4S
Charging accuracy: &lt0.005V
Display: LCD IPS 1.54 inch 240*240 resolution
Size: 75mm*54mm

Includes

1x ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60
1x AC Cable


Specifications Input: AC100-240V@MAX30W Battery Type: LiPo LiHV LiFe @1-4S Charging Power: 0.5-2.5A@25W Bal Cur. : 200mA @2-4S Charging accuracy: &lt;0.005V Display: LCD IPS 1.54 inch 240*240 resolution Size: 75mm*54mm Includes 1x ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60 1x AC Cable

M4AC 30W 2.5A 1-4S AC Smart Charger- XT60

Specifications

Input: AC100-240V@MAX30W
Battery Type: LiPo LiHV LiFe @1-4S
Charging Power: 0.5-2.5A@25W
Bal Cur. : 200mA @2-4S
Charging accuracy: &lt;0.005V
Display: LCD IPS 1.54 inch 240*240 resolution
Size: 75mm*54mm

Includes

1x ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60
1x AC Cable


FLYWOO

XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging       Specification: Input: AC100-240V@MAX30W Battery Type: LiPo LiHV LiFe @1-4S Charging Power: 0.5-2.5A@25W Bal Cur. : 200mA @2-4S Charging accuracy: &lt0.005V Display: LCD IPS 1.54 inch 240*240 resolution Size: 75mm*54mm*30mm Weight: 120g Packaging included: 1X ToolkitRC M4AC Charger (XT60)

XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging       Specification: Input: AC100-240V@MAX30W Battery Type: LiPo LiHV LiFe @1-4S Charging Power: 0.5-2.5A@25W Bal Cur. : 200mA @2-4S Charging accuracy:

ToolkitRC M4AC 30W 2.5A AC Smart Battery Balance Charger XT60 Output f

ToolkitRC M4AC 30W 2.5A AC Smart Battery Balance Charger XT60 Output for 1-4S LiPo LiHV LiFe Battery

Charge 2-4S batteries by plugging this charger right into the wall, no need for a bulky power supply.
Check out our other Battery Chargers and Accessories, and all our ToolkitRC products!
Specifications

Input: AC100-240V@MAX30W
Battery Type: LiPo LiHV LiFe @2-4S
Charging Power: 0.5-2.5A@25W
Bal Cur. : 200mA @2-4S
Charging accuracy: &amplt0.005V
Display: LCD IPS 1.54 inch 240x240 resolution
Size: 75mm*54mm

Includes

1x ToolkitRC M4AC 30W 2.5A 2-4S AC Smart Charger- XT60


Charge 2-4S batteries by plugging this charger right into the wall, no need for a bulky power supply. Check out our other Battery Chargers and Accessories, and all our ToolkitRC products! Specifications Input: AC100-240V@MAX30W Battery Type: LiPo LiHV LiFe @2-4S Charging Power: 0.5-2.5A@25W Bal Cur. : 200mA @2-4S Charg

ToolkitRC M4AC 30W 2.5A 2-4S AC Smart Charger- XT60 from WREKD Co.

ToolkitRC M4AC 30W 2.5A 2-4S AC Smart Charger- XT60

Charge 2-4S batteries by plugging this charger right into the wall, no need for a bulky power supply.
Check out our other Battery Chargers and Accessories, and all our ToolkitRC products!
Specifications

Input: AC100-240V@MAX30W
Battery Type: LiPo LiHV LiFe @2-4S
Charging Power: 0.5-2.5A@25W
Bal Cur. : 200mA @2-4S
Charging accuracy: &lt0.005V
Display: LCD IPS 1.54 inch 240x240 resolution
Size: 75mm*54mm

Includes

1x ToolkitRC M4AC 30W 2.5A 2-4S AC Smart Charger- XT60


ToolkitRC M6D 500W 25A 1-6S Dual Channel DC Smart Charger

ToolKitRC M6D 500W 15A 1-6S DC Dual Smart Charger

The M6D Dual Smart Charger features asynchronous automatic power distribution and synchronous output for greater power. It includes an optimized heat dispersing system to dissipate high power heat in no time! You will find an easy-to-navigate system,

Another great charger from ToolKitRC! This charger features dual outputs rated for 250w each, easy to navigate menus, a whopping 800ma balance capacity, all while keeping a compact size!

Get the The ToolKitRC M6D Dual Lipo Charger - 500W shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

ToolKitRC M6D Dual Lipo Charger - 500W - RMRC

ToolKitRC M6D Dual Lipo Charger - 500W

ToolkitRC's new AC/DC 2 channel charger operates on an internal 200W AC power supply or up to 700W on DC power! A 65W Type-C interface supports fast charging of laptops, tablets, and other devices. Other features include a bright 3.5" color display with a wide viewing angle, a metal scroll wheel, and the solid ToolkitRC build quality you expect!
Features

Two independent charging channels
Operates on internal 200W AC power supply or 7-28V DC power

65W USB-C fast charge port
Metal Dial Wheel

3.5" IPS Color Display 

Specifications

Input voltage: DC 7.0-28.0V  @MAX 30A | AC 100-240V @ MAX 2.5A
Type of battery: Lipo  LiHV  LiFe Li-Ion @1-6S | NiMh @1-16S   Pb @1-10S
Balance current: 1000mA @2-6S
Balance accuracy: &lt0.005V
Charger power: 0.1-15A @350Wx2  (Asynchronous mode) | 0.1-25A @700W  (Synchronous mode)
Discharge power: 350W  @MAX 15Ax2（Recycle mode) | 15W@3A *2 (Normal mode)
USBC power: MAX 65W 3.25A @20.0V  or Upgraded
USBC protocol: PD,QC,AFC,FCP,SCP,PE,SFCP,VOC
Battery voltage: 1.0V-5.0V@1-6S
Internal resistance: 1-100mR@1-6S
Product size: 127x106x57 mm
Product weight:520g
Pack size: 158x134x63 mm
Pack weight: 700g
LCD: IPS  3.5 inch LCD 480x320 Pixel

Includes

1x ToolkitRC M6DAC 200W 15A Dual Channel AC/DC Smart Charger



ToolkitRC's new AC/DC 2 channel charger operates on an internal 200W AC power supply or up to 700W on DC power! A 65W Type-C interface supports fast charging of laptops, tablets, and other devices. Other features include a bright 3.5" color display with a wide viewing angle, a metal scroll wheel, and the solid ToolkitR

M6D AC Dual Charger

ToolkitRC's new AC/DC 2 channel charger operates on an internal 200W AC power supply or up to 700W on DC power! A 65W Type-C interface supports fast charging of laptops, tablets, and other devices. Other features include a bright 3.5" color display with a wide viewing angle, a metal scroll wheel, and the solid ToolkitRC build quality you expect! Features Two independent charging channels Operates on internal 200W AC power supply or 7-28V DC power 65W USB-C fast charge port Metal Dial Wheel 3.5" IPS Color Display  Specifications Input voltage: DC 7.0-28.0V  @MAX 30A | AC 100-240V @ MAX 2.5A Type of battery: Lipo  LiHV  LiFe Li-Ion @1-6S | NiMh @1-16S   Pb @1-10S Balance current: 1000mA @2-6S Balance accuracy: &lt;0.005V Charger power: 0.1-15A @350Wx2  (Asynchronous mode) | 0.1-25A @700W  (Synchronous mode) Discharge power: 350W  @MAX 15Ax2（Recycle mode) | 15W@3A *2 (Normal mode) USBC power:

XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging           1.2.4&quot LCD screen 2.Dual Channel 3.Asynchronous and synchronous modes 4.Cell checker 5.USB 5V Output Specification:   Input: 7-28V@MAX30A Battery Type: LiPo LiHV LiFe Lion@1-6S                         NiMh @1-16S Pb @1-10S Bal Cur. : 800mA 

XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging           1.2.4" LCD screen 2.Dual Channel 3.Asynchronous and synchronous modes 4.Cell checker 5.USB 5V Output Specification:   Input: 7-28V@MAX30A Battery Type: LiPo LiHV LiFe Lion@1-6S                         NiMh @1-16S Pb @1-10S Bal Cur. : 800mA

ToolkitRC M6D 500W 15A High Power DC Dual Smart Charger Discharger for

ToolkitRC M6D 500W 15A High Power DC Dual Smart Charger Discharger for 1-6S Lipo LiHV Lion NiMh Pb Battery - Black

The ToolkitRC M6D is a great option to safely charge multiple batteries at the same time. 
A power supply is required to use this charger, check out the RDQ 360W and 500W power supplies.
Check out our other Battery Chargers and Accessories, and all our ToolkitRC products!

Features

2.4&quot LCD screen
Dual channel
Asynchronous and synchronous modes
Cell checker
USB 5V output

Specifications

Input: 7-28V@MAX30A
Battery Type:

LiPo LiHV LiFe Lion@1-6S
NiMh @1-16S Pb @1-10S

Bal Cur. : 800mA @2-6S
Accuracy: &amplt0.005V
Charging Power:

0.1-15A@250W *2（Asynchronous mode）
0.1-25A@500W（Synchronous mode）

Discharging Power:

0.1-15A@250W*2 Recycle Mode
0.1-3A@12W*2 Normal Mode

USB: 2.1A@5V upgrade@USB3.0
Battery Voltage: 1.0V-5.0V @1-6S
Battery Internal Resistance: 1-100mR @1-6S
Display: LCD IPS 2.4 inch 320*240 resolution
Size: 98mm*68mm*35mm
Weight: 220g
Size: 108.5mm*80.5mm*46mm
Weight: 300g

Includes

1x ToolkitRC M6D 500W 15A 1-6S Dual Channel DC Smart Charger





The ToolkitRC M6D is a great option to safely charge multiple batteries at the same time.  A power supply is required to use this charger, check out the RDQ 360W and 500W power supplies. Check out our other Battery Chargers and Accessories, and all our ToolkitRC products! Features 2.4" LCD screen Dual channel Asynchron

ToolkitRC M6D 500W 15A 1-6S Dual Channel DC Smart Charger from WREKD Co.

ToolkitRC M6D 500W 15A 1-6S Dual Channel DC Smart Charger

This is the new ToolkitRC M6D dual port 500w charger, a great way to charge multiple batteries without the risk of using a parallel charging board.The M6D is a DC charger so make sure to pickup a power supply for it from our wide variety of Power Supplies!Checkout all our chargers and our ToolkitRC collection. Features

If you need to safely charge multiple batteries at once, look no further than the ToolkitRC M6D Dual Channel 500W 25A DC Battery Charger. This incredible charger is fast, safe, and durable!

ToolkitRC M6D Dual Channel 500W 25A DC Battery Charger for Sale

Wafl's Cap Cap

WaFL’s XT60 Cap Cap 3 Pack

WaFL FPV

Are you tired of trying to solder wires on those pesky little capacitor leads? Step your builds up a notch with WaFL’s Cap Cap.
The XT60 Cap Cap allows easy access to your capacitor on your XT60 connector and gets it out of the way of other mo

WaFL’s XT60 Cap Cap (Set of 3)

Name WaFL’s XT60 Cap Cap (Set of 3) Vendor SKU WAF002 MSRP (USD) 4.99 MAP (USD) 4.99 Product Description The XT60 Cap Cap makes soldering a capacitor to your XT60 a painless process. Perfect for tight mini-quad builds, the XT60 cap cap makes your cap easily accessible and swappable, leaving more room inside your frame 

WAFL

The XT60 Cap Cap makes soldering a capacitor to your XT60 a painless process. Perfect for tight mini-quad builds, the XT60 cap cap makes your cap easily accessible and swappable, leaving more room inside your frame for your fragile components. Comes in a set of 3!
Guaranteed to work with Amass XT30 connectors.  Although it’s unlikely, different brands of XT60 connectors may not fit properly. Our Black XT60's seem to be a tight fit but our yellow XT60's are a perfect fit.
Example pictures show one unit attached to a 2200uf 25v Capacitor, Amass XT60, and 16awg wire. Capacitor, wires, and XT60 are not included. EDA by Olaf Hichwa.
Check out our other tools and building supplies and all our Capacitors!
Specifications

Weight:  0.6g (+/- 10%) per unit,  2.6g per set of 3 units (+/- 10%)

Dimensions: Each unit is 20mm x 16.4mm (+/- 10%), and 1.6mm thick (+/- 10%)


Includes

3x WaFL’s XT60 Cap Cap 


The XT60 Cap Cap makes soldering a capacitor to your XT60 a painless process. Perfect for tight mini-quad builds, the XT60 cap cap makes your cap easily accessible and swappable, leaving more room inside your frame for your fragile components. Comes in a set of 3! Guaranteed to work with Amass XT30 connectors.  Althoug

WaFL’s XT60 Cap Cap 3 Pack - Choose Color

WaFL’s XT60 Cap Cap 3 Pack for Sale RaceDayQuads

Flight Controller Part Type

Lipo Killer - Safe Lipo Battery Discharger / Disposer XT60 & XT30

FPVElite

0V Lipo Killer Battery Discharger for Lipo Battery with XT60 & XT30 Plug RC Drone FPV Racing.

The Lipo Killer - 0v Battery Discharger is designed to drain Lipo batteries with either an XT60 or XT30 plug all the way down to 0 volts for safe disposal.
Specifications 

Model: Lipo Killer
Item Name: 0V Battery Discharger for Lipo Battery

Lipo Killer - 0v Battery Discharger

RDQ is proud to present the Lipo Killer! The Lipo Killer discharges old or damaged batteries you wish to dispose of down to 0v. This eliminates all charge from the battery and makes the pack safe to dispose. The Lipo Killer Discharger can take 1-3 days to discharge a pack depending on the battery&#39s charge, and does so at a safe rate of discharge. The discharger works for any cell lipo at any charge. 
To use, simply attach the Lipo Killer to the XT60 battery lead of the battery. The light will turn on, indicating the battery is being discharged. When the light turns off, the battery is fully discharged and safe to be disposed of.
We also have a version which brings the lipo to storage voltage, you can find that here.
Note: RDQ is not responsible for accidental use of the discharger (ie you kill a battery you did not mean to kill). Additionally, we are not responsible for damage caused by any of our products, and using this product within a fireproof container on a fireproof surface is always recommended.
Check out our other tools and building supplies!
Includes

1x Lipo Killer - Safe Lipo Battery Discharger / Disposer


RDQ is proud to present the Lipo Killer! The Lipo Killer discharges old or damaged batteries you wish to dispose of down to 0v. This eliminates all charge from the battery and makes the pack safe to dispose. The Lipo Killer Discharger can take 1-3 days to discharge a pack depending on the battery's charge, and does so 

Lipo Killer - Safe Lipo Battery Discharger / Disposer XT60 & XT30 from WREKD Co.

This is a great way to drain your damaged Li-Polymer battery down to 0 Volt before disposing it.Simply plug the unit to your battery's XT60 or XT30 battery and leave it on till the blinking LED shuts off, once the LED is off then it's safe to dispose the battery.Please make sure to dispose the battery in an appropriate

Zero Volt Lipo Killer XT60 and XT30 Connectors

CHEN

RDQ is proud to present the Lipo Killer! The Lipo Killer discharges old or damaged batteries you wish to dispose of down to 0v. This eliminates all charge from the battery and makes the pack safe to dispose. The Lipo Killer Discharger can take 1-3 days to discharge a pack depending on the battery's charge, and does so at a safe rate of discharge. The discharger works for any cell lipo at any charge. 
To use, simply attach the Lipo Killer to the XT60 battery lead of the battery. The light will turn on, indicating the battery is being discharged. When the light turns off, the battery is fully discharged and safe to be disposed of.
We also have a version which brings the lipo to storage voltage, you can find that here.
Note: RDQ is not responsible for accidental use of the discharger (ie you kill a battery you did not mean to kill). Additionally, we are not responsible for damage caused by any of our products, and using this product within a fireproof container on a fireproof surface is always recommended.
Check out our other tools and building supplies!
Includes

1x Lipo Killer - Safe Lipo Battery Discharger / Disposer


Power Genius

Power Genius 4 Pack 2-6S 2in1 Parallel Charging Board - XT30 & XT60

No need to carry a separate charging board for your Xt30 and XT60 batteries with this 2 in 1 parallel charging board!
NOTE: You are not able to use the XT30 and XT60 ports simultaneously.
This board does not come with an XT60 Extension Cable.
Check out our ever growing selection of chargers and battery accessories! 
Specifications

Supports XT60 or XT30 2-6S Lipo.  
 High-quality gold-plated connectors.Supports up to four packs of the same type, same cells 2-6S battery pack 
 Balanced port output line with 18AWG multi-strand silicone wire 
 Thicken PCB copper foil, allows for security using 35A charging current 
 Equipped with a 40A fuse between any two groups of batteries to prevent line burned due to the large battery pressure. 

Includes

1x Power Genius 4 Pack 2-6S 2in1 Parallel Charging Board - XT30 &amp XT60


No need to carry a separate charging board for your Xt30 and XT60 batteries with this 2 in 1 parallel charging board! NOTE: You are not able to use the XT30 and XT60 ports simultaneously. This board does not come with an XT60 Extension Cable. Check out our ever growing selection of chargers and battery accessories! Spe

BetaFPV

BetaFPV Toothpick F405 V4 2-4S AIO Whoop/Toothpick Flight Controller - 20A 32Bit ESC

BETAFPV

The new ultralight Toothpick F405 2-4S AIO 20A FC is finally released! Compared with the V3 version, the new V4 board updates the F411 chip to F405. It can handle 20A of continuous current and up to 4S! Strong performance lets you break through the limits of your quad and explore more possibilities in the flight. Highly recommend using it on Beta95X V3 and Beta95X V3 HD Digital VTX to get a smooth flight. 
Note: The MPU6000 gyro is not available due to rising prices and lack of stock. We decide to change the gyro to BMI270 for the Toothpick series flight controller to continuously provide the product service.

Know More About BMI270
BMI270 gyro works great in most cases, especially in low frequency. But it will need more software filters and is sensitive in high frequency. This can be solved by adjusting filter settings in PID tuning. You can flash our CLI file or set gyro lowpass 2 at 135Hz and choose filter type at PT2 in settings. This will help BMI270 gyro to get a similar performance as MPU6000 gyro. Below pictures show the difference between the two gyros.Download CLI File &amp FC Firmware here.

Bullet Point

Updated the F411 chip to F405, this new 20A AIO board handles a continuous current of 20A and a burst current of 22A, bringing pilots a more stable flight. 
BETAFPV 12A/20A AIO flight controller reserves the same UART ports layout, UART3 for Rx, UART4 for DJI, UART6 for SmartAudio and the Spare UART1, more convenient for pilots to solder.
Come with 2 integrated Plug &amp Play Ports for both digital VTX and Rx, less solder work needed, easy to install. 
Come with a 26mm x 26mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter like Beta95X V3 and Beta95X V3 HD Digital VTX. 


Comparison of Toothpick 12A AIO FC, Toothpick 20A AIO FC and Toothpick F405 20A AIO FC V4




Specifications of FC










CPU: STM32F405RGT6

Six-Axis: BMI270
Size: 26mm x 26mm, whoop mounting pattern

Firmware version: Batefight-BETAFPV405-4.2.X

OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
Connecter: XT30, it also can be changed to XT60 if pilots need it.
Weight: 5.76g

Specifications of ESC

Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

Input voltage: 2S-4S Lipo
Continuous current: 20A
Peak current: 22A
Firmware: BLHELI-32



Please Note: The chip of F405 V4 flight controller's ESC has changed to AT32F415 from STM32F105 due to shortage. While the AT32F415 is applicable to the ESC firmware version BETAFPV_20A_AT32.


Recommended Parts

Frame: Beta95X V3 Frame Kit 

Motors: 1106 3800KV Brushless Motor 

Props: Gemfan D63 5-Blades Props 

VTX: M02 25-250mW 5.8G VTX 


Antenna: Air 5.8GHz Antenna 

Battery: 450mAh 4S battery 




Diagram for Toothpick F405 20A AIO FC V4


Status LED 
There are 2 LEDs on the bottom of the board to indicate the status, including the Power LED ( Red), FC LED(Blue).






LED


Status


Description




Power LED ( Red)


Solid


Power on




FC LED ( Blue )


Solid


Motor Armed





How to Connect the External Rx to Toothpick F405 20A AIO FC V4
The new AIO board has integrated the Plug &amp Play Port for the external Rx, and there will be a 4-Pin connector for Rx in the package. Thus, we highly recommend pilots to use pin-connect to save the solder work. 
















Package

1 * Toothpick F405 20A AIO FC V4
1 * Cable Pigtail (XT30)
4 * M2x10mm screws
4 * M2 nuts 
4 * Anti-vibration rubber dampers
4 * Motor Pluggable Pins
1 * 6-Pin Connector for Digital VTX

1 * 4-Pin Connector for Rx





The new ultralight Toothpick F405 2-4S AIO 20A FC is finally released! Compared with the V3 version, the new V4 board updates the F411 chip to F405. It can handle 20A of continuous current and up to 4S! Strong performance lets you break through the limits of your quad and explore more possibilities in the flight. Highl

Toothpick F405 2-4S AIO Brushless Flight Controller 20A (BLHELI_32) V4

Processor (MCU)

FC Stack Mount

Built-in VTX

Built-in ESC

BetaFPV TinyTrainer F405 4S Brushless Flight Controller AIO V4 - 32Bit 20A ESC

TinyTrainer Betaflight 4.3 Diff : https://docs.google.com/document/d/1CETRUqg766s0d-tmpkefgksTyOGTdz5DrLZHSONIaEM/edit?usp=sharing

https://youtu.be/1di8CB5VpH8

The new ultralight Toothpick F405 2-4S AIO 20A FC is finally released! Compared with the V3 version, the new V4 board updates the F411 chip to F405. It can handle 20A of continuous current and up to 4S! Strong performance lets you break through the limits of your quad and explore


FEATURES:

 	Updated the F411 chip to F405, this new 20A AIO board handles a continuous current of 20A and a burst current of 22A, bringing pilots a more stable flight.
 	BETAFPV 12A/20A AIO flight controller reserves the same UART ports layout, UART3 for Rx, UART4 for DJI, UART6 for SmartAudio and the Spare UART1, more convenient for pilots to solder.
 	Come with 2 integrated Plug &ampamp Play Ports for both digital VTX and Rx, less solder work needed, easy to install.
 	Come with a 26mm x 26mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter like Beta95X V3 and Beta95X V3 HD Digital VTX.

&ampnbsp
COMPARISON OF TOOTHPICK 12A AIO FC, TOOTHPICK 20A AIO FC AND TOOTHPICK F405 20A AIO FC V4

SPECIFICATIONS OF FC:

 	CPU: STM32F405RGT6
 	Six-Axis: BMI270
 	Size: 26mm x 26mm, whoop mounting pattern
 	Firmware version: Batefight-BETAFPV405-4.2.X
 	OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
 	Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
 	Connecter: XT30, it also can be changed to XT60 if pilots needs.
 	Weight: 5.76g

SPECIFICATIONS OF ESC:

 	Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300，Dshot600
 	Input voltage: 2S-4S Lipo
 	Continuous current: 20A
 	Peak current: 22A
 	Firmware: BLHELI-32

PACKAGE INCLUDES:

 	1 * Toothpick F405 20A AIO FC V4
 	1 * Cable Pigtail (XT30)
 	4 * M2x10mm screws
 	4 * M2 nuts
 	4 * Anti-vibration rubber dampers
 	4 * Motor Pluggable Pins
 	1 * 6-Pin Connector for Digital VTX
 	1 * 4-Pin Connector for Rx




 	


DIAGRAM FOR TOOTHPICK F405 20A AIO FC V4



STATUS LED
There are 2 LEDs on the bottom of the board to indicate the status, including the Power LED ( Red), FC LED(Blue).








LED
Status
Description


Power LED ( Red)
Solid
Power on


FC LED ( Blue )
Solid
Motor Armed






HOW TO CONNECT THE EXTERNAL RX TO TOOTHPICK F405 20A AIO FC V4
The new AIO board has integrated the Plug &ampamp Play Port for the external Rx, and there will be a 4-Pin connector for Rx in the package. Thus, we highly recommend pilots to use pin-connect to save the solder work. In addition, please notice that when you connect the different external Rx, the pads near the pin need to be soldered in a different way. Please solder it as the following diagram.

BetaFPV TinyTrainer F405 4S AIO Brushless Flight Controller 20A(BLHeli_32) V4 | Five33

BetaFPV TinyTrainer F405 4S AIO Brushless Flight Controller 20A(BLHeli_32) V4

XT30 Connector

Generic

For those smaller builds, the XT30 is the perfect connector. It can easily handle the power these builds pull while saving weight and space compared to using XT60s.

XT30 Connector Male and Female Pair

Premium XT30 connector.
Check out all our pigtails, connectors and adapters, and all our soldering supplies while you&#39re at it!
Includes

1x XT30 Connector - Male or Female


Upgrade your drone's connections with premium XT30 connectors. Perfect for racing, freestyle, cinema, and long-range flights. Get yours now!

XT30 Connector (1PC) - Male or Female from WREKD Co.

XT30 Connector (1PC) - Male or Female

Premium XT30 connector.
Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it!
Includes

1x XT30 Connector - Male or Female


Premium XT30 connector. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Includes 1x XT30 Connector - Male or Female

GNB (Gaoneng)

RDQ Series 5500mAh 4S 14.8V 70C Lipo Battery











All batteries must be shipped by a ground shipping method.




















This RDQ Series 14.8V 4S 5500mAh LiPO battery is designed for the serious FPV enthusiast, delivering 70C with peak performance and reliability. It's the perfect choice for powering multi-rotor drones and other FPV setups thanks to its XT60 connector.




















RDQ Series Lipos are known and loved by the community for their strong performance and solid reliability flight after flight, all while offering an unmatched level of value!










Check out our selection of 4S batteries, and our entire RDQ battery line!
Specifications

Capacity: 5500mAh

Cells: 4
Voltage: 14.8V

Cells Configuration: 4S1P

Pack Dimension: 36x44x139mm (HxWxL)

Net Weight: 445g (+/-14g)

Discharge Rate: 70C

Charge Rate:1C-5C

Discharge Connector: XT60
Balance lead JST-XH

Includes

RDQ Series 14.8V 5500mAh 14.8V 70C 4S LiPO - XT60


All batteries must be shipped by a ground shipping method. This RDQ Series 14.8V 4S 5500mAh LiPO battery is designed for the serious FPV enthusiast, delivering 70C with peak performance and reliability. It's the perfect choice for powering multi-rotor drones and other FPV setups thanks to its XT60 connector. RDQ Series

RDQ Series 14.8V 4S 5500mAh 14.8V 70C LiPO - XT60

Cells

LiPo Connector

RDQ Series 2500mAh 3S 11.1V 5C Lipo Battery for Taranis X9D

All batteries must be shipped by a ground shipping method.
This LiPo is not intended for FrSky X9D Plus 2019 or X9D Plus SE 2019. 3S power will damage these radios. We now offer a 2S battery pack designed specifically for X9D 2019 radios! Our newest TX pack is design specifically for the original FrSky Taranis X9D+ and X9D+ SE series transmitters. Includes 3 discharge lead types for compatibility with a wider range of transmitters. More juice equals more stick time! 
Optionally add a XT60 to JST-XH adapter for charging.
We also carry a TX LiPo specifically for the Taranis QX7. 
Check out all the RDQ Series LiPos, and all our RC Transmitters, parts &amp accessories!
Warning! DO NOT PLUG THE BALANCE CABLE INTO YOUR RADIO!!! SEE BELOW IMAGE

Specifications

Nominal Voltage: 11.1V
Capacity: 2500mAh
Discharge Rate: 5C
Cells: 3S1P
Dimensions: 96x30x26mm
Discharge Lead: JST, 80mm
Discharge Lead:  JST-XH, 80mm
Discharge Lead: Servo, 80mm
Balance lead: JST-XH, 35mm
Weight: 145g

Includes

1x RDQ Series 11.1V 3S 2500mAh 5C LiPo Battery for Taranis X9D
1x (OPTIONAL) XT60 to JST-XH Charging Adapter




The RDQ Series 11.1V 3S 2500mAh 5C LiPo Battery for Taranis X9D is exactly what every pilot using this popular transmitter needs. Get extra power sources at a great price form RDQ.

RDQ Series 11.1V 3S 2500mAh 5C LiPo Battery for Taranis X9D

RDQ Series 11.1V 3S 2500mAh 5C LiPo Battery for Taranis X9D for Sale

RMRC

STRIX Ultimate Joshua Bardwell 2-6S XT30 / XT60 Parallel Charging Board - JB Signature Line

STRIX

The Bardwell parallel charging line just got a whole lot sweeter. Now with one board, you can charge batteries from 2-6S with either XT30 or XT60 connection, all with just one board! This upgraded design keeps the main key features from the other boards and turns it into something for everyone.
This board&#39s main power lead comes equipped with an XT60 connector, which is handy for chargers like ISDT. It also comes with an adapter to go from XT60 back to traditional 4mm banana style. Safety is a major concern for any form of parallel charging. Checking each cell of every single battery before connecting them together is extremely important! If you see a cell&#39s voltage that is not like the rest, do not charge it with the others in parallel! To help with this, we have added a cell checker at the top of the board. You need to check them one at a time before plugging them all into the board, however. We have also provided replaceable fuses between the main power leads to aid in preventing surges from one pack to another. For example, we suggest only parallel charging packs that are within roughly 0.1 volts per cell, or 0.4 volts for a 4S pack. So a pack that is at 15.0 volts total would be safe to charge with another pack that was 15.4 volts or 14.6 volts. The same logic holds true for 5S and 6S batteries. 
Check out our other Battery Chargers and Accessories!

Specifications

Input Power Connector: XT60 Male housing, Female Bullets with 12AWG wire

Also includes 4mm banana adapter


Charge Connector: 6x XT60 and XT30 male housing, Male Bullets
Fuse: 15A automotive (removable without de-soldering)
Balance Connector: 6x XH 2-6s Connectors
Dimensions: 203x79.5x30mm
Maximum Current: 70A Total (Needs to use more than 4 ports)

Includes

1x Bardwell 6S Parallel Charging Board 2.0 - JB Signature Line


The Bardwell parallel charging line just got a whole lot sweeter. Now with one board, you can charge batteries from 2-6S with either XT30 or XT60 connection, all with just one board! This upgraded design keeps the main key features from the other boards and turns it into something for everyone. This board's main power 

STRIX Ultimate Joshua Bardwell 2-6S XT30 / XT60 Parallel Charging Board - JB Signature Line from WREKD Co.

The Bardwell parallel charging line just got a whole lot sweeter. Now with one board, you can charge batteries from 2-6S with either XT30 or XT60 connection, all with just one board! This upgraded design keeps the main key features from the other boards and turns it into something for everyone.
This board's main power lead comes equipped with an XT60 connector, which is handy for chargers like ISDT. It also comes with an adapter to go from XT60 back to traditional 4mm banana style. Safety is a major concern for any form of parallel charging. Checking each cell of every single battery before connecting them together is extremely important! If you see a cell's voltage that is not like the rest, do not charge it with the others in parallel! To help with this, we have added a cell checker at the top of the board. You need to check them one at a time before plugging them all into the board, however. We have also provided replaceable fuses between the main power leads to aid in preventing surges from one pack to another. For example, we suggest only parallel charging packs that are within roughly 0.1 volts per cell, or 0.4 volts for a 4S pack. So a pack that is at 15.0 volts total would be safe to charge with another pack that was 15.4 volts or 14.6 volts. The same logic holds true for 5S and 6S batteries. 
Check out our other Battery Chargers and Accessories!

Specifications

Input Power Connector: XT60 Male housing, Female Bullets with 12AWG wire

Also includes 4mm banana adapter


Charge Connector: 6x XT60 and XT30 male housing, Male Bullets
Fuse: 15A automotive (removable without de-soldering)
Balance Connector: 6x XH 2-6s Connectors
Dimensions: 203x79.5x30mm
Maximum Current: 70A Total (Needs to use more than 4 ports)

Includes

1x Bardwell 6S Parallel Charging Board 2.0 - JB Signature Line


You'll love the Bardwell 2-6S XT30 / XT60 Parallel Charging Board, straight from the JB Signature Line. This is a sweet addition to an already elite collection!

Bardwell 2-6S XT30 / XT60 Parallel Charging Board for Sale - JB Signature Line

CNHL

CNHL MiniStar 1000mAh 6S 100C Lipo Battery - XT60

All batteries must be shipped by a ground shipping method.
CNHL MiniStar 22.2V 6S 1000mAh 100C LiPo Battery - XT60
CNHL continues to give the people what they want while staying true to their powerful and durable design!





Stock Number
1001006G


Capacity 
1000mAh


Voltage
22.2V / 6-Cell / 6S1P


Discharge Rate
100C Continual / 200C Burst


Charge Rate
5C Max


Size
56X30X66mm


Weight 
186g (Including wire and connector)


Output Connector
XT60


Balance Connector
JST / XH


Remarks
N/A







All batteries must be shipped by a ground shipping method. CNHL MiniStar 22.2V 6S 1000mAh 100C LiPo Battery - XT60 CNHL continues to give the people what they want while staying true to their powerful and durable design! Stock Number 1001006G Capacity  1000mAh Voltage 22.2V / 6-Cell / 6S1P Discharge Rate 100C Continual

Search Parts

Showing Results for "xt30 to xt60" — 956 results