FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

ToolkitRC

ToolKitRC M7 200W 10A 2-6S DC Smart Charger & Diagnostic Tool

The ToolkitRC M7 is a 200W multifunctional balance charger with 33.3% more power than the M6. With its IPS wide-angle display and simplified interface, this charger is ideal for outdoor viewing. 

The ToolkitRC M7 is a 200W multifunctional balance charger with 33.3% more power than the M6. With its IPS wide-angle display and simplified interface, this charger is ideal for outdoor viewing. The scroll wheel allows for better control for yea

ToolkitRC M7 200W 10A 2-6S DC Multifunctional Balance Charger

TOOLKITRC

<p><span data-mce-fragment="1">The ToolkitRC M7 has been reinvented and is better than ever!<br><br>This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 AC is the same size as its predecessor and is 33% more powerful with a max output of 200W and 15A! Now including ToolkitRC's dual sliding connector doors which allow you to switch from XT30 to XT60 in a flash!!</span></p>
<p><span data-mce-fragment="1">Check out all our </span><a href="https://www.racedayquads.com/collections/battery-chargers-accessories" title="all chargers and charging accessories for sale at racedayquads" data-mce-fragment="1" target="_blank" data-mce-href="https://www.racedayquads.com/collections/battery-chargers-accessories">chargers and charging accessories</a><span data-mce-fragment="1"> and our selection of </span><a href="https://www.racedayquads.com/collections/toolkitrc-products" title="all toolkitrc products for sale at racedayquads" data-mce-fragment="1" target="_blank" data-mce-href="https://www.racedayquads.com/collections/toolkitrc-products">ToolkitRC products</a><span data-mce-fragment="1">!</span></p>
<h3><span data-mce-fragment="1">Features</span></h3>
<ul>
<li><span>Battery Charger</span></li>
<li><span>Cell Checker</span></li>
<li><span>Servo Tester</span></li>
<li><span>PWM, PPM.SBUS Input/output &amp Receiver tester</span></li>
<li><span>Viable AMP/volt DC Power supply (Required external DC input</span></li>
<li>Lithium battery cut-off voltage can be set (TVC function)</li>
<li>Measure battery voltage, internal resistance, balance</li>
<li>Measure PWM / PPM / xBUS signal values, Accuracy 1ms</li>
<li>Output PWM / PPM / xBUS standard signal, Accuracy 1ms</li>
<li>Customizable 1-28V constant voltage, 1-10A constant current</li>
<li>Charge the drone battery, activate and charge.</li>
<li>Multi-language optional</li>
<li>USB 2.1A@5.0V Output<span>，</span><span>for Mobile devices</span>
</li>
</ul>
<h3><span data-mce-fragment="1">Specifications</span></h3>
<div><span></span></div>
<div>
<ul>
<li><span>LCD: IPS  2.0inch </span></li>
<li><span>LCD: 320*240 Pixel</span></li>
<li><span>Input voltage: 7.0-28.0V  @MAX 12A</span></li>
<li><span>Input voltage: AC 100-240V MAX 100W 1.5A</span></li>
<li><span>Type of battery: </span></li>
<ul>
<li><span>Lipo  LiHV  LiFe Lion@1-6</span></li>
<li><span>NiMh @1-16S   Pb @1-10S</span></li>
</ul>
<li><span>Balance current: 400mA @2-6S</span></li>
<li><span>Charger power: </span></li>
<li><span>200W @MAX 15A</span></li>
<li><span>Discharge power: </span></li>
<ul>
<li><span>200W  @MAX 10A Recycle mode</span></li>
<li><span>10W@3A Normal mode</span></li>
</ul>
<li><span>USB: 2.1A @5.0V or Upgrade</span></li>
<li><span>Product size: 112x72*38 mm</span></li>
<li><span>Product weight: 245g</span></li>
<li><span>Pack size: 144x73x38mm<br data-mce-fragment="1"></span></li>
<li><span>Pack weight: 380g</span></li>
</ul>
</div>
<div><span><strong>Input</strong></span></div>
<div>
<ul>
<li><span>PWM: 880-2200us @20-400Hz</span></li>
<li><span>PPM: 880-2200us*8CH @20-50Hz</span></li>
<li><span>SBUS: 880-2200us*16CH @20-100Hz</span></li>
<li><span>Voltage: 1.0-5.0V @1-6S</span></li>
<li><span>Internal resistance: 1-99mR @1-6S</span></li>
<li><span>ESC: 200W@10A       PWM Output</span></li>
</ul>
</div>
<div><strong>Output</strong></div>
<div>
<ul>
<li><span>PWM: 500-2500us @20-1000Hz</span></li>
<li><span>PPM: 880-2200us*8CH @20-50Hz</span></li>
<li><span>SBUS: 880-2200us*16CH @20-100Hz</span></li>
<li><span>Power supply: 1.0-28.0V  @1.0-10A  mode:CC+CV</span></li>
<li><span>OverCurrent Cutoff time: &lt5ms</span></li>
</ul>
<h3><span>Includes</span></h3>
<ul>
<li><span>1x ToolKitRC M7 200W 10A 1-6S DC Smart Charger &amp Diagnostic Tool</span></li>
</ul>
</div>

The ToolkitRC M7 has been reinvented and is better than ever!This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 AC is the same size as its predecessor and is 33% more powerful with a max output of 200W and 15A! Now including ToolkitRC's dual slid

ToolKitRC M7 AC 200W 15A 2-6S DC Smart Charger with XT60 & XT30 Plug

<p><span data-mce-fragment="1">The ToolkitRC M6 has been reinvented and is better than ever!<br><br>This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 is the same size as its predecessor and is 33% more powerful with a max output of 200W and 10A!</span></p>
<p><span data-mce-fragment="1">Check out all our </span><a data-mce-fragment="1" title="all chargers and charging accessories for sale at racedayquads" href="https://www.racedayquads.com/collections/battery-chargers-accessories" data-mce-href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">chargers and charging accessories</a><span data-mce-fragment="1"> and our selection of </span><a data-mce-fragment="1" title="all toolkitrc products for sale at racedayquads" href="https://www.racedayquads.com/collections/toolkitrc-products" data-mce-href="https://www.racedayquads.com/collections/toolkitrc-products" target="_blank">ToolkitRC products</a><span data-mce-fragment="1">!</span></p>
<p><span data-mce-fragment="1"><iframe title="YouTube video player" src="https://www.youtube.com/embed/xCDT0pHHhHU" height="315" width="560" allowfullscreen="" allow="accelerometer autoplay clipboard-write encrypted-media gyroscope picture-in-picture" frameborder="0"></iframe></span></p>
<h3><span data-mce-fragment="1">Features</span></h3>
<ul>
<li><span>Battery Charger</span></li>
<li><span>Cell Checker</span></li>
<li><span>Servo Tester</span></li>
<li><span>PWM, PPM.SBUS Input/output &amp Receiver tester</span></li>
<li><span>Viable AMP/volt DC Power supply (Required external DC input</span></li>
<li>Lithium battery cut-off voltage can be set (TVC function)</li>
<li>Measure battery voltage, internal resistance, balance</li>
<li>Measure PWM / PPM / xBUS signal values, Accuracy 1ms</li>
<li>Output PWM / PPM / xBUS standard signal, Accuracy 1ms</li>
<li>Customizable 1-28V constant voltage, 1-10A constant current</li>
<li>Charge the drone battery, activate and charge.</li>
<li>Multi-language optional</li>
<li>USB 2.1A@5.0V Output<span>，</span><span>for Mobile devices</span>
</li>
</ul>
<h3><span data-mce-fragment="1">Specifications</span></h3>
<div><span></span></div>
<div>
<ul>
<li><span>LCD: IPS  2.0inch </span></li>
<li><span>LCD: 320*240 Pixel</span></li>
<li><span>Input voltage: 7.0-28.0V  @MAX 12A</span></li>
<li><span>Type of battery: </span></li>
<ul>
<li><span>Lipo  LiHV  LiFe Lion@1-6</span></li>
<li><span>NiMh @1-16S   Pb @1-10S</span></li>
</ul>
<li><span>Balance current: 400mA @2-6S</span></li>
<li><span>Charger power: </span></li>
<li><span>200W @MAX 10A</span></li>
<li><span>Discharge power: </span></li>
<ul>
<li><span>200W  @MAX 10A Recycle mode</span></li>
<li><span>10W@3A Normal mode</span></li>
</ul>
<li><span>USB: 2.1A @5.0V or Upgrade</span></li>
<li><span>Product size: 73*51*27 mm</span></li>
<li><span>Product weight: 90g</span></li>
<li><span>Pack size: 84*79*39 mm</span></li>
<li><span>Pack weight: 150g</span></li>
</ul>
</div>
<div><span><strong>Input</strong></span></div>
<div>
<ul>
<li><span>PWM: 880-2200us @20-400Hz</span></li>
<li><span>PPM: 880-2200us*8CH @20-50Hz</span></li>
<li><span>SBUS: 880-2200us*16CH @20-100Hz</span></li>
<li><span>Voltage: 1.0-5.0V @1-6S</span></li>
<li><span>Internal resistance: 1-99mR @1-6S</span></li>
<li><span>ESC: 200W@10A       PWM Output</span></li>
</ul>
</div>
<div><strong>Output</strong></div>
<div>
<ul>
<li><span>PWM: 500-2500us @20-1000Hz</span></li>
<li><span>PPM: 880-2200us*8CH @20-50Hz</span></li>
<li><span>SBUS: 880-2200us*16CH @20-100Hz</span></li>
<li><span>Power supply: 1.0-28.0V  @1.0-10A  mode:CC+CV</span></li>
<li><span>OverCurrent Cutoff time: &lt5ms</span></li>
</ul>
<h3><span>Includes</span></h3>
<ul>
<li><span>1x ToolKitRC M7 200W 10A 1-6S DC Smart Charger &amp Diagnostic Tool</span></li>
</ul>
</div>

The ToolkitRC M6 has been reinvented and is better than ever!

ToolKitRC M7 200W 10A 2-6S DC Smart Charger & Diagnostic Tool - For Sale at RaceDayQuads

Battery Tool Type

Battery Chargers and Power Management

Gens Ace

Gens Ace Imars 15A 1-6S Dual Channel AC/DC Smart Charger

TATTU

<p><span style="color: #ff2a00"><strong>Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.</strong></span></p>
<p><span> IMars Dual Charger support 2 channel --- charging and discharging: DC port power supply supports maximum single-port 300W charging, and AC power supply supports intelligent distribution of total power. </span><span>The power rate is 200W (2 channels), the maximum charging current is 15A, the charging current is adjustable, and the use and operation are simple 7 operating modes of the products include charge, discharge, balance, storage, ExtDischarge, SyncCharging, digital power supply.</span> During the charging process of the product, the current task total voltage, charging/discharging current, working time and other information can be displayed in real time through the display window. It can also query real-time single-cell voltage information, internal resistance, and temperature, which is convenient for users to understand battery performance and charging status. The heat dissipation design can effectively ensure the continuous stable and reliable operation of the product. Suitable for any RC Car / FPV / Aircraft / Heli / Drone / UAV Batteries.</p>
<p> </p>
<p><span>Check out our other</span><span> </span><a title="all battery chargers and accessories for sale at racedayquads" href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">battery chargers and accessories</a><span>!</span><br></p>
<h3><span>Specifications</span></h3>
<div>
<ul>
<li>Input Voltage:  <span data-mce-fragment="1">AC 100-240V DC 7-30V</span> <br>
</li>
<li>Charge Current: <span data-mce-fragment="1">0.1-15A x2</span>
</li>
<li>Charge Power:</li>
<ul>
<li>DC 300W x2 </li>
<li>AC 200W<span>(</span>Support power distribution<span>)</span>
</li>
</ul>
<ul></ul>
<li>Battery Type:</li>
<ul>
<li>LiHv/LiPo/LiFe/NiMH  </li>
</ul>
<li>External Discharge Current:  <span data-mce-fragment="1">0.1~3A x2</span>
</li>
<li>USB Output: 5V / 2.4A </li>
<li>Dimensions: <span data-mce-fragment="1">145x76x62 mm</span>
</li>
<li>Net Weight:  530g </li>
</ul>
<h3>Includes</h3>
<div>
<ul>
<li>1x GensAce Imars 15A 1-6S Dual Channel AC/DC Smart Charger</li>
<li>1x AC Power Cord </li>
<li>1x Manual </li>
</ul>
<p><br></p>
</div>
</div>

Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.  IMars Dual Charger support 2 channel --- charging and discharging: DC port power supply supports maximum single-port 300W charging, and AC power supply supports intelligent distribution of total power. The power

GensAce Imars 15A 1-6S Dual Channel AC/DC Smart Charger

Happymodel

Happymodel 1S Series Lipo Balance Charging Board

HAPPYMODEL

<p><span data-mce-fragment="1">The Happymodel 1S Balance Charging Board allows you to charge up to four 1S LiPo batteries with PH2 connector at the same time.</span></p>
<p><span data-mce-fragment="1">The board supports a maximum 1.5A charging current but charge at 1C to be safe. This method of charging is a little safer then parallel charging as it allows the charger to individually monitor and balance each cell. </span></p>
<p><span data-mce-fragment="1">This is a great charger for anyone that would like to charge 1s liPos for your Mobula, Moblite or Mobeetle!</span></p>
<p><span>Check out our other <a href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">charging accessories</a></span><span>, as well as the rest of our <a data-mce-fragment="1" title="all happymodel FPV Products for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/happymodel-products" target="_blank" data-mce-href="https://www.racedayquads.com/collections/happymodel-products">HappyModel gear</a>!</span><span data-mce-fragment="1">!</span></p>
<h3>Specifications</h3>
<ul>
<li>Input Voltage: 1S</li>
<li>Max Amperage: 1.5A</li>
<li>Dimensions: 81x46x20mm</li>
<li>Weight: 35g</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x HappyModel 1S Series LiPo Balance Charging Board</li>
</ul>

The Happymodel 1S Balance Charging Board allows you to charge up to four 1S LiPo batteries with PH2 connector at the same time. The board supports a maximum 1.5A charging current but charge at 1C to be safe. This method of charging is a little safer then parallel charging as it allows the charger to individually monito

HappyModel 1S Series LiPo Balance Charging Board

ISDT

ISDT P10 250W 10A 1-6S Dual Channel DC Smart Charger

CHEN

<p data-mce-fragment="1">The P10 is yet another excellent charging option from ISDT. With dual channel charging and an output of up to 250W per channel, this charger is a great choice for field or home charging.<br></p>
<p data-mce-fragment="1"><span data-mce-fragment="1">Check out all </span><a data-mce-fragment="1" href="https://www.racedayquads.com/collections/battery-chargers-accessories" title="all chargers and charging accessories for Sale at RaceDayQuads" data-mce-href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">our chargers &amp charging accessories</a><span data-mce-fragment="1">, as well as our</span><a data-mce-fragment="1" href="https://www.racedayquads.com/collections/isdt-products" title="all isdt FPV Products for Sale at RaceDayQuads" data-mce-href="https://www.racedayquads.com/collections/isdt-products" target="_blank"> ISDT selection</a><span data-mce-fragment="1">!</span></p>
<h3><iframe title="YouTube video player" src="https://www.youtube.com/embed/6hZJgtxUUoc" height="315" width="560" allowfullscreen="" allow="accelerometer autoplay clipboard-write encrypted-media gyroscope picture-in-picture" frameborder="0"></iframe></h3>
<h3>Specifications</h3>
<ul>
<li>Input Voltage: DC 10~30V</li>
<li>Output Voltage: DC 1~26.4V</li>
<li>Max. Input Current: DC 20A</li>
<li>Charging Current: 0.2~10A x2</li>
<li>Balance Current: .5A/Cell Max</li>
<li>Max. Charging Power: DC 250W x2</li>
<li>Abnormal Voltage Alarm: Support</li>
<li>Incorrect Cell Count Setting Alarm: Support</li>
<li>Supported Battery Types: LiFe, Lilon, LiPo 1~6S, LiHv 1-6S, Pb 1-12S, NiMH/Cd 1-16S</li>
<li>Dimensions: 90.5x90.5x47mm</li>
<li>Weight: 250g</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x ISDT P10 250W 20A 1-6S DC Dual Channel Smart Charger</li>
</ul>
<p><img src="https://cdn.shopify.com/s/files/1/1285/4651/files/1111_423f075d-5fba-4770-ab8d-48076768ab90.jpg?v=1656105353" alt=""></p>

The P10 is yet another excellent charging option from ISDT. With dual channel charging and an output of up to 250W per channel, this charger is a great choice for field or home charging. Check out all our chargers &amp; charging accessories, as well as our ISDT selection! Specifications Input Voltage: DC 10~30V Output 

ISDT P10 250W 20A 1-6S DC Dual Channel Smart Charger

At a solid 250W per channel, this charger will have your packs charged up and ready in no time.Check out all our Chargers and the rest of our ISDT Products! Specifications: Input voltage: DC 10~30V Output voltage: DC 1~26.4V Max. input current: 20A Charging current: 0.2~10.0A*2 Balance current: 0.5A/Cell Max Max. charg

ISDT K2 Air 200/500W 20A 2-6S AC/DC Dual Channel Smart Charger

<p data-mce-fragment="1"><span style="color: #ff2a00" data-mce-fragment="1"><strong data-mce-fragment="1">Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.</strong></span></p>
<p data-mce-fragment="1"><span data-mce-fragment="1">The K2 AIR from ISDT runs on both AC and DC input and has two separate channels to charge from and includes a USB-C 5V/2A output! This charger cranks out up 200W over two channels on AC and up to 500W per channel on DC! This version also connects to a mobile app, allowing you to take full control of this charger's capabilities.</span></p>
<p data-mce-fragment="1"><span data-mce-fragment="1">Check out all </span><a title="all chargers and charging accessories for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/battery-chargers-accessories" data-mce-fragment="1" target="_blank" data-mce-href="https://www.racedayquads.com/collections/battery-chargers-accessories">our chargers &amp charging accessories</a><span data-mce-fragment="1">, as well as our</span><a title="all isdt FPV Products for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/isdt-products" data-mce-fragment="1" target="_blank" data-mce-href="https://www.racedayquads.com/collections/isdt-products"> ISDT selection</a><span data-mce-fragment="1">!</span></p>
<h3>Specifications</h3>
<ul>
<li>Input Voltage: AC 100~240V / DC 10~30V</li>
<li>Output Voltage: DC 1~30V</li>
<li>Max. Input Current: DC 35A</li>
<li>Charging Current: 0.2~20A x2</li>
<li>Discharging Current: 0.2~1.5A x2</li>
<li>Balance Current: 1.5A/Cell Max</li>
<li>Max. Discharging Power: 15W x2</li>
<li>Max. Charging Power: AC 200W / DC 500W x2</li>
<li>Abnormal Voltage Alarm: Support</li>
<li>Incorrect Cell Count Setting Alarm: Support</li>
<li>Supported Battery Types: LiFe, Lilon, LiPo 1~6S, LiHv 1-6S, Pb 1-12S, NiMH/Cd 1-16S</li>
<li>Parallel Charging Power and Current: 800W/35A</li>
<li>Parallel Discharge Power and Current: 30W/3A</li>
<li>Working Temperature: 0~40℃</li>
<li>Storage Temperature: -20℃~60℃</li>
<li>Dimensions: 142x135x64mm</li>
<li>Weight: 700g</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x ISDT K2 Air 200/500W 20A 1-6S AC/DC Dual Channel AC Smart Charger</li>
</ul>
<p><img alt="" src="https://cdn.shopify.com/s/files/1/1285/4651/files/222.jpg?v=1656099559"></p>

Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground. The K2 AIR from ISDT runs on both AC and DC input and has two separate channels to charge from and includes a USB-C 5V/2A output! This charger cranks out up 200W over two channels on AC and up to 500W per channel

ISDT 

ISDT K2 Air AC 200W DC 500Wx2 20A Dual Channel Balance Lipo Charger Discharger

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

ISDT K2 Air AC 200W DC 500Wx2 20A Dual Port Charger Discharg - RMRC

ISDT K2 Air AC 200W DC 500Wx2 20A Dual Port Charger Discharger

ToolkitRC Q4AC 100W 5A Quad Channel 2-4S Smart Charger - XT60

ToolkitRC's new AC/DC 4 channel charger operates on an internal 100W AC power supply or up to 200W on DC power! Other features include a bright 3.5" color display with a wide viewing angle, a metal scroll wheel, and the solid ToolkitRC build quality you expect!ut testers and output generators along with a variable volt

TThe ToolkitRC Q4AC is an updated version of the M4Q with a faster processor, upgraded charging power, and a new casing. 

The ToolkitRC Q4AC is an updated version of the M4Q with a faster processor, upgraded charging power, and a new casing. This is a Quad Channel AC/DC smart charger featuring four independently operated charging outputs. This charger comes wi

ToolkitRC Q4AC 1-4S 100W AC / 200W DC 4CH Smart Charger - XT60

<p><span data-mce-fragment="1">ToolkitRC's new AC/DC 4 channel charger o</span><span data-mce-fragment="1">perates on an internal 100W AC power supply or up to 200W on DC power!</span><span data-mce-fragment="1"> Other features include a bright 3.5" color display with a wide viewing angle, a metal scroll wheel, and the solid ToolkitRC build quality you expect!</span><br></p>
<p><span data-mce-fragment="1">Check out our other <a href="https://www.racedayquads.com/collections/new-products/manufacturer_hota" title="all toolkitrc products for sale at racedayquads" target="_blank" data-mce-href="https://www.racedayquads.com/collections/new-products/manufacturer_hota">ToolkitRC offerings,</a> as well as the rest of our <a href="https://www.racedayquads.com/collections/battery-chargers-accessories" data-mce-href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">chargers.</a></span></p>
<h3><span data-mce-fragment="1">Features</span></h3>
<ul>
<li><span data-mce-fragment="1">AC or DC input</span></li>
<li><span data-mce-fragment="1">Up to 4 channels</span></li>
<li><span data-mce-fragment="1">Wide view screen</span></li>
<li><span data-mce-fragment="1">32bit processor</span></li>
<li><span data-mce-fragment="1">Multiple language support</span></li>
</ul>
<h3>Specifications</h3>
<ul>
<li>Input Voltage: AC100-240V@MAX1.5A, DC10-18V@MAX20A</li>
<li>Supported Battery Type: LiPo LiHV LiFe Lion@1-4S, NiMh @1-10S, Pb @1-8S</li>
<li>Balance Current: 240mA @2-4S</li>
<li>Balance Accuracy: &lt 0.005V</li>
<li>Charge Power: 0.1-5A@50W*4 DC IN, 0.1-5A@50W*2 AC IN, 0.1-5A@25W*4 AC IN</li>
<li>Discharge Power: 0.1-2A@5W*4</li>
<li>Voltage Range: 0.2V-5.0V @1-4S</li>
<li>Internal Resistance: 1-100mR @1-4S</li>
<li>MicroUSB: Upgrade@USB2.0</li>
<li>Dimensions: 150x112x36.5mm</li>
<li>Weight: 600g</li>
<li>LCD: IPS 3.5 寸480*320 pixel</li>
</ul>
<h3><a title="Q4AC Manual" href="https://newwezhanhkoss.oss-cn-hongkong.aliyuncs.com/contents/sitefiles3605/18029379/files/77300..pdf?Expires=1649961423&ampOSSAccessKeyId=LTAIekGM1705vEQp&ampSignature=ou%2FzxFgwNd8CXYKrQkDdB0iTfyk%3D&ampresponse-content-disposition=inline%3Bfilename%3DQ4AC%2520Manual%2520V1.0.pdf&ampresponse-content-type=application%2Fpdf" target="_blank">Manual</a></h3>
<ul></ul>
<h3>Includes</h3>
<ul>
<li>1x ToolkitRC Q4AC 100W 5A Quad Channel 2-4S Smart Charger</li>
</ul>

You're going to love having the XT60 ToolkitRC Q4AC 100W 5A Quad Channel 2-4S Smart Charger in your pack. Charge batteries on the go with ease today!

XT60 ToolkitRC Q4AC 100W 5A Quad Channel 2-4S Smart Charger for Sale

FLYWOO

The ToolKitRC Q4AC 50W is an AC/DC smart charger that features dual power and great flexibility. This smart charger includes four ports, a built-in 100w AC power supply, 200w DC input for more power, four channel-independent operations, and a display for easy control and view. The ToolKitRC M4Q also includes a 32 Bit ARM processor for high-precision charging management and balancing accuracy &lt0.005V and a 3.5" IPS screen with 480x320 resolution for a clear and wide-angle display. 

Product description


Charging Input: AC100-240V@MAX1.5A DC10-18V@MAX20A
Battery Type: LiPo  LiHV  LiFe  Lion@1-4S NiMh @1-10S     Pb @1-8S
Bal Cur.: 240mA @2-4S
Accuracy: &lt0.005V
Charging Power:
0.1-5A@50W*4  DC input
0.1-5A@50W*2  AC input
0.1-5A@25W*4  AC input
Discharge power:
0.1-2A@5W*4
Firmware upgrade: USB
Battery Voltage: 1.0V-5.0V @1-4S
Battery Internal Resistance: 1-100mR @1-4S
Display LCD IPS: 3.5" 480*320px
Product Size: 150mm*112mm*36.5mm
Weight: 450g
Individual Packing Size 160mm*160mm*46mm
Shipping Weight: 600g

 

































































































































The ToolKitRC Q4AC 50W is an AC/DC smart charger that features dual power and great flexibility. This smart charger includes four ports, a built-in 100w AC power supply, 200w DC input for more power, four channel-independent operations, and a display for easy control and view. The ToolKitRC M4Q also includes a 32 Bit ARM processor for high-precision charging management and balancing accuracy &lt;0.005V and a 3.5" IPS screen with 480x320 resolution for a clear and wide-angle display.  Product description Charging Input: AC100-240V@MAX1.5A DC10-18V@MAX20A Battery Type: LiPo  LiHV  LiFe  Lion@1-4S NiMh @1-10S     Pb @1-8S Bal Cur.: 240mA @2-4S Accuracy: &lt;0.005V Charging Power: 0.1-5A@50W*4  DC input 0.1-5A@50W*2  AC input 0.1-5A@25W*4  AC input Discharge power: 0.1-2A@5W*4 Firmware upgrade: USB Battery Voltage: 1.0V-5.0V @1-4S Battery Internal Resistance: 1-100mR @1-4S Display LCD IPS: 3.5" 480*320px Product Size: 150mm*112mm*36.5mm Weight: 450g Individual Packing Size 160mm*160mm*46mm Shipp

New ToolkitRC Q4AC 4x50w 4 Port AC DC Smart Charger

The ToolKitRC Q4AC 50W is an AC/DC smart charger that features dual power and great flexibility. This smart charger includes four ports, a built-in 100w AC power supply, 200w DC input for more power, four channel-independent operations, and a display for easy control and view. The ToolKitRC M4Q also includes a 32 Bit ARM processor for high-precision charging management and balancing accuracy &lt;0.005V and a 3.5" IPS screen with 480x320 resolution for a clear and wide-angle display. 

Product description


Charging Input: AC100-240V@MAX1.5A DC10-18V@MAX20A
Battery Type: LiPo  LiHV  LiFe  Lion@1-4S NiMh @1-10S     Pb @1-8S
Bal Cur.: 240mA @2-4S
Accuracy: &lt;0.005V
Charging Power:
0.1-5A@50W*4  DC input
0.1-5A@50W*2  AC input
0.1-5A@25W*4  AC input
Discharge power:
0.1-2A@5W*4
Firmware upgrade: USB
Battery Voltage: 1.0V-5.0V @1-4S
Battery Internal Resistance: 1-100mR @1-4S
Display LCD IPS: 3.5" 480*320px
Product Size: 150mm*112mm*36.5mm
Weight: 450g
Individual Packing Size 160mm*160mm*46mm
Shipping Weight: 600g

 

































































































































ToolkitRC M4 Pocket 80W 5A 1-4S DC Charger

The acclaimed ToolkitRC M4 Pocket Charger is perfect for all of your on-the-go FPV charging needs! With 80 Watts of Power, Dual Inputs, Built-In USB-C Input and Output, and an IPS Wide-Angle Color Display, this charger will keep you powered up anywhere yo

The acclaimed ToolkitRC M4 Pocket Charger is perfect for all of your on-the-go FPV charging needs! With 80 Watts of Power, Dual Inputs, Built-In USB-C Input and Output, and an IPS Wide-Angle Color Display, this charger will keep you powered up anywhe

ToolkitRC M4 Pocket 80W 5A 1-4S Compact Balance Charger w/ Built-In USB-C Input/Output

The acclaimed ToolkitRC M4 Pocket Charger is perfect for all of your on-the-go FPV charging needs! With 80 Watts of Power, Dual Inputs, Built-In USB-C Input and Output, and an IPS Wide-Angle Color Display, this charger will keep you powered up anywhere you go! Check out all our Chargers and the rest of our ToolKitRC Pr

<p>The M4 Pocket is a ultra-compact balance charger despite the small size, the M4 pocket has a maximum output of 80W! Featuring an intuitive user interface and a color IPS full viewing angle display ,the M4 Pocket is a capable, bring-anywhere charger!</p>
<p><span>Check out our other </span><a href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">Battery Chargers and Accessories</a><span>, and all our</span><span> </span><a href="https://www.racedayquads.com/collections/toolkitrc-products" title="toolkitrc products for sale at racedayquads" target="_blank">ToolkitRC products</a><span>!</span></p>
<p><span><iframe title="YouTube video player" src="https://www.youtube.com/embed/wCadWt0I7u8" height="315" width="560" allowfullscreen="" allow="accelerometer autoplay clipboard-write encrypted-media gyroscope picture-in-picture" frameborder="0"></iframe></span></p>
<h3><span>Specifications</span></h3>
<ul>
<li><span>Input Voltage: XT60 7.0-25.0V MAX 5.0A, USB-C 7.0-20.0V</span></li>
<li><span>USB-C protocol: QC,PD,AFC,FCP Protocol<br data-mce-fragment="1"></span></li>
<li><span>Type of battery: LiPo LiHv LiFe LipoStorage 1-4S<br data-mce-fragment="1"></span></li>
<li><span>Charge power: 1.0-5.0A@MAX 80W<br data-mce-fragment="1"></span></li>
<li><span>Balance current: 400mA @4.20V</span></li>
<li><span>Balance accuracy: &lt0.005V @ 4.2V</span></li>
<li><span>USB-C output: 1.0A @5.0V</span></li>
<li><span>Screen: IPS 1.54inch LCD 240*240 Pixel</span></li>
<li><span>Dimensions: 80x40x30</span></li>
<li><span>Weight: 75g</span></li>
</ul>
<h3>Includes</h3>
<ul>
<li>ToolkitRC M4 Pocket 80W 5A 1-4S DC Charger</li>
</ul>
<div style="text-align: left" data-mce-fragment="1" data-mce-style="text-align: left"><img src="https://cdn.shopify.com/s/files/1/1285/4651/files/99999999.jpg?v=1640629354" alt="" style="float: none" data-mce-fragment="1" data-mce-style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/1285/4651/files/99999999.jpg?v=1640629354"></div>
<br>

The M4 Pocket is a ultra-compact balance charger; despite the small size, the M4 pocket has a maximum output of 80W! Featuring an intuitive user interface and a color IPS full viewing angle display ,the M4 Pocket is a capable, bring-anywhere charger! Check out our other Battery Chargers and Accessories, and all our Too

ToolkitRC MC8 Multi-Functional 2-8S Battery Checker

The ToolkitRC MC8 Multi-Functional 2-8S Battery Checker is a multi-purpose battery cell checker that allows you to balance battery cells for better performance. This device features PD fast charging, a metal roller for UI control, and an innovative slider

The ToolkitRC MC8 Multi-Functional 2-8S Battery Checker is a multi-purpose battery cell checker that allows you to balance battery packs for better performance. This device features PD fast charging, a metal roller for UI control, and an innovative s

<p>The latest from Toolkit is a feature packed multi purpose cell checker with a big, bright, easy to read display. Not only can you check cell voltages and balance your packs, you can also monitor the PWM/PPM/SBUS output of receivers, generate PWM output to test servos and ESCS, and use your LiPos for device charging (up to 20W PD)!  Check the video below to see what it can do!<br><br>Check out all our <a href="https://www.racedayquads.com/collections/battery-chargers-accessories" class="in-cell-link" title="Batteries and Chargers For Sale at RaceDayQuads" target="_blank">Battery Chargers and Accessories</a> and our <a title="all toolkitrc products for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/toolkitrc-products?sort_by=created-descending" target="_blank">ToolkitRC selection</a>!</p>
<p><iframe style="font-size: 1.4em" width="560" height="315" src="https://www.youtube.com/embed/hr8ynT9Be-w" title="YouTube video player" frameborder="0" allow="accelerometer autoplay clipboard-write encrypted-media gyroscope picture-in-picture" allowfullscreen=""></iframe><br></p>
<h3>Features</h3>
<ul>
<li><span face="Verdana" size="2">Large Color Screen </span></li>
<li><span lang="EN-US"><span face="Verdana" size="2">Battery Status Display</span></span></li>
<li><span lang="EN-US"><span face="Verdana" size="2">PWM/PPM/SBUS Readout</span></span></li>
<li><span lang="EN-US"><span face="Verdana" size="2">PWM Output</span></span></li>
<li><span lang="EN-US"><span face="Verdana" size="2">One Touch Battery Balancer</span></span></li>
<li><span lang="EN-US"><span face="Verdana" size="2">PD Fast Charging</span></span></li>
<li><span lang="EN-US"><span face="Verdana" size="2">Metal Roller UI Control</span></span></li>
<li><span lang="EN-US"><span face="Verdana" size="2">Innovative Slider Output Control</span></span></li>
</ul>
<h3>Specifications</h3>
<div>
<ul>
<li><span>LCD:  2" IPS 320x240</span></li>
<li><span>Dimensions: 68x50x15mm</span></li>
<li><span>Weight: 50g</span></li>
</ul>
</div>
<div>
<strong>Checker</strong><span> </span>
</div>
<div>
<ul>
<li><span>Main Input port: XT60 7.0-35.0V </span></li>
<li><span>Balance input: 0.5V-5.0V Lixx 2-8S</span></li>
<li><span>Signal port input: &lt6.0V</span></li>
<li><span>Balance current: MAX 60mA @2-8S</span></li>
<li><span>Balance accuracy: &lt0.005V @ 4.2V</span></li>
<li><span>USB-A output: 5.0V@1.0A firmware upgrade</span></li>
<li><span>USB-C output: 5.0V-12.0V @MAX 20W</span></li>
<li><span>USB-C protocol: PD3.0 QC3.0 AFC SCP FCP</span></li>
</ul>
</div>
<div><strong>Measurer</strong></div>
<div>
<ul>
<li><span>PWM: 880-2200us @20-400Hz</span></li>
<li><span>PPM: 880-2200us*8CH @20-50Hz</span></li>
<li><span>SBUS: 880-2200us*16CH @20-100Hz</span></li>
</ul>
</div>
<div>
<span> </span><strong>Output</strong><span>  </span>
</div>
<div>
<ul>
<li><span>PWM: 1000-2000us @20-1000Hz</span></li>
<li><span>PPM: 880-2200us*8CH @20-50Hz</span></li>
<li><span>SBUS: 880-2200us*16CH @20-100Hz</span></li>
</ul>
</div>
<h3>Includes</h3>
<ul>
<li>1x Toolkit RC MC 8 Multi-Functional 2-8S Battery Checker</li>
</ul>

The latest from Toolkit is a feature packed multi purpose cell checker with a big, bright, easy to read display. Not only can you check cell voltages and balance your packs, you can also monitor the PWM/PPM/SBUS output of receivers, generate PWM output to test servos and ESCS, and use your LiPos for device charging (up

BetaFPV

BetaFPV 6 Port 1S Lipo/LiHV Charger for BT2.0 & PH2.0

BETAFPV

This new BetaFPV 6 Port 1S Battery Charger supports PH2.0 and BT2.0 at the same time. Moreover, the charging is faster when using a 30W adapter. The charger is a compact, fast-charging, portable unit that will suit all of your charging needs.

This new BetaFPV 6 Port 1S Battery Charger supports PH2.0 and BT2.0 at the same time. Moreover, the charging is faster when using a 30W adapter. The charger is a compact, fast-charging, portable unit that will suit all of your charging needs.
Note: 

BetaFPV 6 Port 1S Charging Board

This new 6 ports 1S battery charger supports PH2.0 and BT2.0 at the same time. Moreover, the charging is faster when using 30W adapter. Compact, fast-charging, and portable, choosing a 1S battery charger that best suits your needs will no longer be difficult with this 6 Ports 1S charger &amp; adapter. Check out all our

BetaFPV 6 Port 1S Battery Charger

<p><span data-mce-fragment="1"><strong>On the latest version, "OFF" Position is for charging 4.2V.</strong><br></span></p>
<p><span data-mce-fragment="1"><img alt="" src="https://cdn.shopify.com/s/files/1/1285/4651/files/betasillyswitch.jpg?v=1652889075" data-mce-src="https://cdn.shopify.com/s/files/1/1285/4651/files/betasillyswitch.jpg?v=1652889075" data-mce-fragment="1"><br>The new 6 port 1S battery charger from BetaFPV supports PH2.0 and BT2.0 at the same time. The charging is faster when using 30W adapter. </span><span data-mce-fragment="1">Compact, fast-charging, and portable, choosing a 1S battery charger that best suits your needs will no longer be difficult with this 6 Ports 1S charger &amp adapter.</span></p>
<p><span>Check out all our</span><span> </span><a href="https://www.racedayquads.com/collections/1s-battery-chargers-accessories" title="all 1s chargers for Sale at RaceDayQuads" target="_blank" data-mce-href="https://www.racedayquads.com/collections/1s-battery-chargers-accessories">1S chargers</a><span>, and our</span><span> </span><a href="https://www.racedayquads.com/collections/betafpv-products" title="all betafpv FPV Products for Sale at RaceDayQuads" target="_blank" data-mce-href="https://www.racedayquads.com/collections/betafpv-products">BetaFPV gear</a><span>!</span></p>
<p>Features</p>
<ul>
<li>With BT2.0/PH2.0 two types of battery ports, the charger allows charging BT2.0 and PH2.0 batteries at the same time. </li>
<li>By supporting multi-charging<span data-mce-fragment="1"> protocols including PD3.0/QC3.0/BC1.2, every port's charging current can reach 1A, which makes charging faster.</span>
</li>
<li>
<span data-mce-fragment="1">This portable </span>30W Type-C power adapter offers fast, efficient charging at home, or on the go. </li>
<li>The power adapter is compatible with any USB‑C-enabled device,<span data-mce-fragment="1"> you can also pair it with other devices to take advantage of the fast-charging feature.</span>
</li>
<li>Both EU and US adapters are provided for your choice.</li>
</ul>
<p>Specifications</p>
<ul>
<li>Input connector: Type-C <br>
</li>
<li>Input voltage range: 5-12V<br>
</li>
<li>Max input power: 30W<br>
</li>
<li>Max input current: 2.5A<br>
</li>
<li>Max charging current: 1A (Single-port)<br>
</li>
<li>Support battery connector: BT2.0&ampPH2.0<br>
</li>
<li>Charging protocol：PD3.0 / QC3.0 (5V / 9V / 12V) / BC1.2 <br>
</li>
<li>Battery Type：Lipo 4.2V / LiHV 4.35V<br>
</li>
<li>Dimensions：79x46x19mm</li>
</ul>
<p>Includes</p>
<ul>
<li>1x BetaFPV 6 Port 1S Charger for BT2.0 &amp PH2.0<br>
</li>
<li>1x User manual</li>
<li>1x USA Power Adapter (Only With AC Adpater Version)<br>
</li>
<li>1x Type-C to Type-C cable <span data-mce-fragment="1">(Only With AC Adpater Version)</span>
</li>
</ul>

The new 6 port 1S battery charger from BetaFPV supports PH2.0 and BT2.0 at the same time. The charging is faster when using 30W adapter. Compact, fast-charging, and portable, choosing a 1S battery charger that best suits your needs will no longer be difficult with this 6 Ports 1S charger & adapter.

BetaFPV 6 Port 1S LiPo/LiHV Charger for BT2.0 & PH2.0 - Choose With or Without AC Adapter

BetaFPV 6 Port 1S Charger for BT2.0 & PH2.0 - Choose With or Without AC Adapter - For Sale At RaceDayQuads

This new 6 ports 1S battery charger supports PH2.0 and BT2.0 at the same time. Moreover, the charging is faster when using 30W adapter. Compact, fast-charging, and portable, choosing a 1S battery charger that best suits your needs will no longer be difficult with this 6 Ports 1S charger &amp adapter.

Bullet Point

With BT2.0/PH2.0 two types of battery ports, the charger allows charging BT2.0 and PH2.0 battery at the same time. 
By supporting multi-charging protocols including PD3.0/QC3.0/BC1.2, every port's charging current can reach 1A, which makes charging faster.


This portable 30W Type-C power adapter offers fast, efficient charging at home, or on the go. 
The power adapter is compatible with any USB‑C-enabled device, you can also pair it with other devices to take advantage of the fast-charging feature.

Both EU and US adapters are provided for your choice.

SPECIFICATION

Item: 6 Ports 1S Battery Charger &amp Adapter
Input connector: Type-C 
Input voltage range: 5-12V
Max input power: 30W
Max input current: 2.5A
Max charging current: 1A (Single-port)
Support battery connector: BT2.0&ampPH2.0
Charging protocol：PD3.0/QC3.0 (5V/9V/12V) /BC1.2  
Battery Type：LiHV 4.35V
Dimensions：79*46*19mm


Support Fast Charge
The 30W power adapter supports multi-charging protocols including PD3.0 /QC3.0/ BC1.2, equipped with 6 ports 1S battery charger with a maximum charging current of 1A, which makes charging faster. 6pcs BT2.0 300mAh 1S batteries can be fully charged in about 25 minutes. 

The charging time would be longer with fast charge adapter with output power below 30W or a non-fast charger adapter (5V@2A) since each port can not reach 1A when 6 ports are charged simultaneously.
Button Function
The function of the button is to switch the charge voltage: 4.35V.

The new batches' switch left side changes the "4.2V" to "OFF". See in the picture above.
Indicator Light Status
LED lights indicate when charging status of each battery. Greenlight indicates charging, light off when fully charged.

   



Light status


Description




Greenlight flash


No battery detected




Greenlight on


Charging




Light-off


Charging completed




Note: If the indicator light is off when there is no battery in the output port, indicating that this line is faulty and cannot be used.  

FAQ
Each port has a Ph2.0 &amp BT2.0 connector,  please DO NOT charge 2 batteries in one port at the same time. Otherwise, the battery life will be reduced or the battery will be damaged.
PACKAGE

1 * 6 Ports 1S Battery Charger

1 * User manual

OR

1 * 6 Ports 1S Battery Charger

1 * EU/USA Power Adapter 
1 * Type-C to Type-C cable

1 * User manual



This new 6 ports 1S battery charger supports PH2.0 and BT2.0 at the same time. Moreover, the charging is faster when using 30W adapter. Compact, fast-charging, and portable, choosing a 1S battery charger that best suits your needs will no longer be difficult with this 6 Ports 1S charger &amp; adapter. Bullet Point With

6 Ports 1S Battery Charger & Adapter

HGLRC

HGLRC Thor 2-6S Lipo Battery Discharger - XT60

Discharge your batteries safely... with the HGLRC Thor Discharger! This mini LiPo discharging module will discharge most 2-6S batteries and allow for safe storage when batteries are not in use.

Discharge your batteries safely... with the HGLRC Thor Discharger! This mini LiPo discharging module will discharge most 2-6S batteries and allow for safe storage when batteries are not in use.

VIDEO: NEW! HGLRC Thor battery 'smart' parallel 

HGLRC Thor LiPo Discharger Module

<p><span>No more guessing if you grabbed the right LiPo Discharger. With the new Thor discharger, you can discharge any 2-6S battery! With the simple setup of a digital voltage display and a row of LEDs to select your cell count, you can quickly swap this between any of your favorite batteries. Easily keep every pack you have at storage voltage.</span></p>
<p><span>Check out our other <a href="https://www.racedayquads.com/collections/battery-chargers-accessories" data-mce-href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">charging accessories</a></span><span>, as well as the rest of our </span><a href="https://www.racedayquads.com/collections/hglrc-products" title="all hglrc FPV Products for Sale at RaceDayQuads" data-mce-fragment="1" target="_blank" data-mce-href="https://www.racedayquads.com/collections/hglrc-products">HGLRC selection</a><span data-mce-fragment="1">!</span></p>
<h3>Specifications</h3>
<ul>
<li>Input voltage:2-6s<br>
</li>
<li>Single-chip cut-off voltage of discharging:3.8V<br>
</li>
<li>Battery type: LiPo battery<br>
</li>
<li>Battery interface: XT60<br>
</li>
<li>Display: LED digital tube<br>
</li>
<li>Size: 30.2x17.1x13.9mm<br>
</li>
<li>Weight: 8.2g</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x HGLRC Thor 2-6S Lipo Battery Discharger - XT60</li>
</ul>

No more guessing if you grabbed the right LiPo Discharger. With the new Thor discharger, you can discharge any 2-6S battery! With the simple setup of a digital voltage display and a row of LEDs to select your cell count, you can quickly swap this between any of your favorite batteries. Easily keep every pack you have at storage voltage.

HGLRC Thor 2-6S Lipo Battery Discharger - XT60 - For Sale At RaceDayQuads

HGLRC Thor Lipo Battery Discharger for FPV Drone &amp; RC airplane , the Lipo discharging module supports 2S-6S battery discharger! Check out all our Battery Accessories and the rest of our HGLRC Products! Specifications: Product name: HGLRC Thor Lipo Battery Discharger Input voltage: 2-6s Single-chip cut-off voltage o

HGLRC Thor 2S-6S Lipo Battery Discharger

RMRC

STRIX Ultimate Joshua Bardwell 2-6S XT30 / XT60 Parallel Charging Board - JB Signature Line

<p>The Bardwell parallel charging line just got a whole lot sweeter. Now with one board, you can charge batteries from 2-6S with either XT30 or XT60 connection, all with just one board! This upgraded design keeps the main key features from the other boards and turns it into something for everyone.</p>
<p>This board's main power lead comes equipped with an XT60 connector, which is handy for chargers like ISDT. It also comes with an adapter to go from XT60 back to traditional 4mm banana style. Safety is a major concern for any form of parallel charging. Checking each cell of every single battery before connecting them together is extremely important! If you see a cell's voltage that is not like the rest, do not charge it with the others in parallel! To help with this, we have added a cell checker at the top of the board. You need to check them one at a time before plugging them all into the board, however. We have also provided replaceable fuses between the main power leads to aid in preventing surges from one pack to another. For example, we suggest only parallel charging packs that are within roughly 0.1 volts per cell, or 0.4 volts for a 4S pack. So a pack that is at 15.0 volts total would be safe to charge with another pack that was 15.4 volts or 14.6 volts. The same logic holds true for 5S and 6S batteries. </p>
<p><span>Check out our other <a href="https://www.racedayquads.com/collections/battery-chargers-accessories" class="in-cell-link" title="Batteries and Chargers For Sale at RaceDayQuads" target="_blank" rel="noopener noreferrer">Battery Chargers and Accessories!</a></span></p>
<ul></ul>
<h3>Specifications</h3>
<ul>
<li>Input Power Connector: XT60 Male housing, Female Bullets with 12AWG wire
<ul>
<li>Also includes 4mm banana adapter</li>
</ul>
</li>
<li>Charge Connector: 6x XT60 and XT30 male housing, Male Bullets</li>
<li>Fuse: 15A automotive (removable without de-soldering)</li>
<li>Balance Connector: 6x XH 2-6s Connectors</li>
<li>Dimensions: 203x79.5x30mm</li>
<li>Maximum Current: 70A Total (Needs to use more than 4 ports)</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x Bardwell 6S Parallel Charging Board 2.0 - JB Signature Line</li>
</ul>

You'll love the Bardwell 2-6S XT30 / XT60 Parallel Charging Board, straight from the JB Signature Line. This is a sweet addition to an already elite collection!

Bardwell 2-6S XT30 / XT60 Parallel Charging Board for Sale - JB Signature Line

ToolkitRC P200 Mini 30V 10A 200W Adjustable Power Supply

The ToolkitRC P200 MPower Supply is a mini desktop power supply with GaN Technology. With its IPS wide-angle display and simplified interface, this power supply is ideal for your charging needs. The scroll wheel allows for better control.

The ToolkitRC P200 Mini Power Supply is a mini desktop power supply with GaN Technology. With its IPS wide-angle display and simplified interface, this power supply is ideal for your charging needs. The scroll wheel allows for better contro

ToolkitRC P200 Mini 200W 10A Power Supply

ToolkitRC - P200 Smart Desktop Power Supply with GaN Technology Check out all our Chargers and the rest of our ToolkitRC Products! Package Includes: 1 x ToolkitRC - P200 Smart Desktop Power Supply with GaN Technology 1 x Banana connector to Aligator clips power cable 1 x Banana connector to open end naked cable 1 x C T

ToolkitRC - P200 Smart Desktop Power Supply with GaN Technology AC/DC

<p><strong>Advanced charging protocols require a USB-C to USB-C cable (not included)</strong><br></p>
<p>This extra small power supply has a whopping 200W and loads of features. It is a high quality fully adjustable power supply that will deliver the voltage and amperage you need with accuracy. The USB output supports multiple protocols along with data transfer.</p>
<p>Check out all our<span> </span><a title="all lipo chargers and accessories for sale at racedayquads" href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">Chargers &amp Charging Accessories</a> <span>and all our</span><span> </span><a title="toolkitrc products for sale at racedayquads" href="https://www.racedayquads.com/collections/toolkitrc-products" target="_blank">ToolkitRC products</a><span>!</span></p>
<p><span><iframe width="560" height="315" src="https://www.youtube.com/embed/xCDT0pHHhHU" title="YouTube video player" frameborder="0" allow="accelerometer autoplay clipboard-write encrypted-media gyroscope picture-in-picture" allowfullscreen=""></iframe></span></p>
<h3>Specifications</h3>
<div>
<ul>
<li><span>Input voltage:  </span></li>
<ul>
<li><span>AC 100-240V@MAX 100W</span></li>
<li><span>DC 7-28V@MAX 10A 200W</span></li>
</ul>
<li><span>Main output: </span></li>
<ul>
<li><span>1.0-10.0A @MAX AC 100W / DC 200W</span></li>
<li><span>1.0-30.0V @MAX AC 100W / DC 200W</span></li>
</ul>
<li><span>USB output: 5.0-20.0V @MAX 65W</span></li>
<li><span>USB protocol: </span></li>
<li><span>PD 3.0/PD2.0/PPS/QC4/QC3.0/QC2.0</span></li>
<li><span>AFC/FCP/SCP/PE2.0/PE1.1/SFCP/VOOC</span></li>
<li><span>Protection time: &lt1ms (Short circuit, OC ,OV)</span></li>
<li><span>Control cycle: 8ms</span></li>
<li><span>Product size: 84*63*78 mm</span></li>
<li><span>Product weight: 360g</span></li>
<li><span>Pack size: 160*150*73 mm</span></li>
<li><span>Pack weight: 670g</span></li>
<li><span>LCD: IPS 1.54" 240*240 resolution</span></li>
<li><span>Main port: 4.0mm banana female port</span></li>
<li><span>USB port: TYPE-C Fast charge,  upgrade<br></span></li>
</ul>
<h3><span>Includes</span></h3>
<ul>
<li><span>1x ToolkitRC P200 Mini 30V 10A 100W Adjustable Power Supply</span></li>
</ul>
</div>

This extra small power supply has a whopping 200W and loads of features. It is a high quality fully adjustable power supply that will deliver the voltage and amperage you need with accuracy!

ToolkitRC P200 Mini 30V 10A 200W Adjustable Power Supply - For Sale at RaceDayQuads

DJI FPV Car Charger

The DJI FPV Car Charger can be used to charge the DJI FPV Intelligent Flight Battery through your vehicle's power socket.

The DJI FPV Car Charger can be used to charge the DJI FPV Intelligent Flight Battery through your vehicle's power socket. Overheating protection will automatically cut off charging if the accessory port exceeds a certain temperature. Also works with 

<p><span>The DJI FPV Car Charger can be used to charge the DJI FPV Intelligent Flight Battery through a car's power socket. Overheating protection will automatically cut off charging if the accessory port exceeds a certain temperature.</span></p>
<p><span>Compatible with the </span><a href="https://www.racedayquads.com/products/dji-fpv-battery-charging-hub" title="DJI FPV Battery Charging Hub For Sale at RaceDayQuads" target="_blank">DJI FPV Battery Charging Hub</a></p>
<p><span data-mce-fragment="1"></span><strong></strong><span data-mce-fragment="1">Check out the </span><a href="https://www.racedayquads.com/collections/dji-fpv-drone-and-accessories" title="DJI FPV Drone and Accessories For Sale at RaceDayQuads" data-mce-href="https://www.racedayquads.com/collections/dji-fpv-drone-and-accessories" target="_blank" data-mce-fragment="1">DJI FPV Drone and Accessories Products</a><span data-mce-fragment="1"> and the </span><a href="https://www.racedayquads.com/collections/dji-products" title="dji fpv system for sale at racedayquads" data-mce-href="https://www.racedayquads.com/collections/dji-products" target="_blank" data-mce-fragment="1">DJI FPV System product line</a><span data-mce-fragment="1">!</span></p>
<h3><span data-mce-fragment="1">Specifications</span></h3>
<ul>
<li><span data-mce-fragment="1">Charging temperature: 5°C to 40°C (41° to 104° F)</span></li>
<li><span data-mce-fragment="1">Input voltage: 14.0 V</span></li>
<li><span data-mce-fragment="1">DC output : 25.2 V 3.4 A or 25.2 V 0.8 A</span></li>
<li><span data-mce-fragment="1">Charging time (for a single battery): approx. 50 minutes</span></li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x DJI FPV Car Charger</li>
</ul>

Charge up to three&nbsp;DJI FPV Intelligent Flight Batteries with this handy charging hub!

DJI FPV Battery Charging Hub For Sale at RaceDayQuads

The DJI FPV Car Charger can be used to charge the DJI FPV Intelligent Flight Battery through your vehicle's power socket. Overheating protection will automatically cut off charging if the accessory port exceeds a certain temperature. Also works with the DJI FPV Battery Charging Hub. Check out our DJI FPV Collection and

DJI FPV Battery Charging Hub

The DJI FPV Battery Charging Hub is here! This hub is specially designed to charge up to three of your DJI Intelligent Life Batteries all at once!

The DJI FPV Battery Charging Hub is here! This hub is specially designed to charge up to three of your DJI Intelligent Flight Batteries all at once!
Note: The Charging Hub is only compatible with the DJI FPV AC Power Adapter (Not Included). Please d

The DJI FPV Battery Charging Hub is here! This hub is specially designed to charge up to three of your DJI Intelligent Flight Batteries all at once! Note: The Charging Hub is only compatible with the DJI FPV AC Power Adapter (Not Included). Please do not use the charger for batteries other than the batteries noted. Bat

<p><span data-mce-fragment="1">Charge up to three <a href="https://www.racedayquads.com/products/dji-fpv-intelligent-flight-battery" title="DJI FPV Intelligent Flight Battery For Sale at RaceDayQuads" target="_blank">DJI FPV Intelligent Flight Batteries</a> with this handy charging hub!</span></p>
<p><span data-mce-fragment="1">Requires the <a href="https://www.racedayquads.com/products/dji-fpv-ac-power-adapter" title="DJI FPV AC Power Adapter For Sale at RaceDayQuads" target="_blank">DJI FPV AC Power Adapter</a> to use.</span></p>
<p><span data-mce-fragment="1"></span><strong>Batteries not included</strong></p>
<p><span data-mce-fragment="1">Check out the </span><a href="https://www.racedayquads.com/collections/dji-fpv-drone-and-accessories" title="DJI FPV Drone and Accessories For Sale at RaceDayQuads" data-mce-fragment="1" data-mce-href="https://www.racedayquads.com/collections/dji-fpv-drone-and-accessories" target="_blank">DJI FPV Drone and Accessories Products</a><span data-mce-fragment="1"> and the </span><a href="https://www.racedayquads.com/collections/dji-products" title="dji fpv system for sale at racedayquads" data-mce-fragment="1" data-mce-href="https://www.racedayquads.com/collections/dji-products" target="_blank">DJI FPV System product line</a><span data-mce-fragment="1">!</span></p>
<h3><span data-mce-fragment="1">Specifications</span></h3>
<ul>
<li>Charging Temperature: 5° to 40 °C (41° to 104° F)</li>
<li>Input: 25.2 V, 3.57 A</li>
<li>Charging Time: About 55 minutes (subject to temperature)</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x DJI FPV Battery Charging Hub</li>
</ul>

ViFly

ViFly Short Saver 2 Smoke Stopper - XT30 & XT60

VIFLY

The ultimate Smoke Stopper from VILFY! Not quite as small as the XT30 or XT60 only version, but this one will replace both of those and gives more robust features!



New version 2 brings new on/off buttons for much easier receiver binding!
The ultimate Smoke Stopper from VILFY! Not quite as small as the XT30 or XT60 only version, but this one will replace both of those and gives more robust features!
Features


VIFLY ShortSaver 2 - Smart Smoke Stopper XT60 + XT30

<p class="section-title"><strong>Version 2 of the popular ShortSaver!</strong></p>
<p class="list_title"><strong>What's New:</strong></p>
<ul class="list_check">
<li><strong>Add power on/off switch for easier receiver binding</strong></li>
<li><strong>Adjust short-circuit/over-current trip time via button switch</strong></li>
</ul>
<p>Check out <a title="all tools and supplies for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/tools-and-building-supplies" target="_blank">all our tools and building supplies</a>, and our <a title="all vifly FPV Products for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/vifly-products" target="_blank">Vifly selection</a>!</p>
<p><iframe width="560" height="315" src="https://www.youtube.com/embed/lJq4sxsNNVo" frameborder="0" allow="accelerometer autoplay clipboard-write encrypted-media gyroscope picture-in-picture" allowfullscreen=""></iframe></p>
<p class="section-title"> <iframe width="560" height="315" src="https://www.youtube.com/embed/muHZF0YgxAI" frameborder="0" allow="accelerometer autoplay clipboard-write encrypted-media gyroscope picture-in-picture" allowfullscreen=""></iframe></p>
<p class="section-title"><strong>Completely cut off the current flow and prevent “magic smoke”</strong></p>
<dl>
<dd>For other smoke stoppers like the automotive light-bulb or resettable fuse, they just limit not stop the current flow, the leakage current may still damage your components. VIFLY ShortSaver is a different smoke stopper that adopts the electronic fuse to completely cut off the current into your RC build if a short circuit or wiring mistake is detected.</dd>
</dl>
<p class="section-title"><strong>Super-fast reaction/protection time</strong></p>
<dl>
<dd>VIFLY ShortSaver would turn off the power to a device that drew in excess of the switchable 1A or 2A threshold within just 3ms. It is far more effective than the old way of using light-bulb or resetting fuse. The shorter the protection time, the safer your build will be as something make break by the time the fuse trips.</dd>
</dl>
<p class="section-title"><strong>1 Amp and 2 Amp Threshold Selector</strong></p>
<dl>
<dd>VIFLY ShortSaver is so smart that there is 1 Amp or 2 Amp threshold selector for your different needs. For small size build with more sensitive electronic components, you can select 1 Amp option, for large builds, 2 Amp option is the choice.</dd>
</dl>
<p class="section-title"><strong>Amass XT60 and XT30 In-output Connectors</strong></p>
<dl>
<dd>VIFLY ShortSaver is coming with both Amass XT30 and XT60 connectors, more convenient for your different batteries.</dd>
</dl>
<p><span>Be sure to check out our </span><a title="tools and building supplies for sale at racedayquads" href="https://www.racedayquads.com/collections/tools-and-building-supplies" target="_blank">tools &amp building supplies</a>!</p>
<h3>Features</h3>
<ul>
<li>Completely cut off the current flow and prevent “magic smoke”</li>
<li>Super-fast reaction/protection time</li>
<li>1 Amp and 2 Amp Threshold Selector</li>
<li>Amass XT60 and XT30 In-output Connectors</li>
</ul>
<h3 class="section-title">Specifications</h3>
<ul>
<li>Size(L x W x H): 42 x 30 x 10 mm</li>
<li>Connector: XT30 &amp XT60 (Input and Output)</li>
<li>Switchable current threshold: <span>1A/2A</span>
</li>
<li>Trip time: <span>3ms (Short-Circuit) / 10ms (Over-Current)</span>
</li>
<li>Input Voltage: <span>7-25V (2-6S)</span>
</li>
</ul>
<h3><span>Includes</span></h3>
<ul>
<li><span>1x ViFly ShortSaver 2 Smoke Stopper - XT30 &amp XT60</span></li>
</ul>
<h4><span>Diagram</span></h4>
<p><span><img src="https://cdn.shopify.com/s/files/1/1285/4651/files/shortsaver21.jpg?v=1609871840" alt=""></span></p>

Version 2 of the popular ShortSaver! What's New: Add power on/off switch for easier receiver binding Adjust short-circuit/over-current trip time via button switch Check out all our tools and building supplies, and our Vifly selection!   Completely cut off the current flow and prevent “magic smoke” For other smoke stopp

This is the second iteration of the ShortSaver! With power on/off switch for easier receiver binding and a button to adjust short-circuit and over-current trip time. Check out all our Electronics and the rest of our ViFly Products! Completely cut off the current flow and prevent “magic smoke” For other smoke stoppers l

ViFly Short Saver 2 Smoke Stopper - XT30/XT60

ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60

ToolKitRC M4AC 30W 2.5A Compact AC Balance Charger - XT60

The ToolKitRC M4AC 30W Compact Balance Charger (XT30) is a small lithium battery balance charger that has excellent performance! Compare to similar products, the power performance of the M4AC is increased by 33%-66%. The display features IPS full vie

ToolKitRC

Specifications

Input: AC100-240V@MAX30W
Battery Type: LiPo LiHV LiFe @1-4S
Charging Power: 0.5-2.5A@25W
Bal Cur. : 200mA @2-4S
Charging accuracy: &lt0.005V
Display: LCD IPS 1.54 inch 240*240 resolution
Size: 75mm*54mm

Includes

1x ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60
1x AC Cable


Specifications Input: AC100-240V@MAX30W Battery Type: LiPo LiHV LiFe @1-4S Charging Power: 0.5-2.5A@25W Bal Cur. : 200mA @2-4S Charging accuracy: &lt;0.005V Display: LCD IPS 1.54 inch 240*240 resolution Size: 75mm*54mm Includes 1x ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60 1x AC Cable

M4AC 30W 2.5A 1-4S AC Smart Charger- XT60

Specifications

Input: AC100-240V@MAX30W
Battery Type: LiPo LiHV LiFe @1-4S
Charging Power: 0.5-2.5A@25W
Bal Cur. : 200mA @2-4S
Charging accuracy: &lt;0.005V
Display: LCD IPS 1.54 inch 240*240 resolution
Size: 75mm*54mm

Includes

1x ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60
1x AC Cable


Specifications: Input: AC 100-240V @MAX 30W Battery type: LiPo LiHv LiFe LipoStorage 1-4S Charging power: 0.5-2.5A @ 25W Balance current: MAX 200mA @2-4S Charging accuracy: &lt;0.005V Display: IPS 1.54 inch 240*240 resolution Product Size: 75mm*54mm*30mm Weight: 120g Package Size: 80mm*58mm*58mm Package Weight: 180g  C

ToolkitRC - M4AC 30w LiPO LiFE LiHV Compact AC Charger

The ToolKitRC M4AC 30W Compact Balance Charger (XT30) is a small lithium battery balance charger that has excellent performance! Compare to similar products, the power performance of the M4AC is increased by 33%-66%.

ToolKitRC M4AC 30W 2.5A Compact AC Balance Charger - XT30


XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging


 

 

 









Specification:



Input: AC100-240V@MAX30W

Battery Type: LiPo LiHV LiFe @1-4S

Charging Power: 0.5-2.5A@25W

Bal Cur. : 200mA @2-4S

Charging accuracy: &lt0.005V

Display: LCD IPS 1.54 inch 240*240 resolution

Size: 75mm*54mm*30mm

Weight: 120g



Packaging included:



1X ToolkitRC M4AC Charger (XT60)






XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging       Specification: Input: AC100-240V@MAX30W Battery Type: LiPo LiHV LiFe @1-4S Charging Power: 0.5-2.5A@25W Bal Cur. : 200mA @2-4S Charging accuracy: &lt;0.005V Display: LCD IPS 1.54 inch 240*240 resolution Size: 75mm*54mm*30mm Weight: 120g Packaging included: 1X ToolkitRC M4AC Charger (XT60)

ToolkitRC M4AC 30W 2.5A AC Smart Battery Balance Charger XT60 Output for 1-4S LiPo LiHV LiFe Battery


XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging


 

 

 









Specification:



Input: AC100-240V@MAX30W

Battery Type: LiPo LiHV LiFe @1-4S

Charging Power: 0.5-2.5A@25W

Bal Cur. : 200mA @2-4S

Charging accuracy: &lt;0.005V

Display: LCD IPS 1.54 inch 240*240 resolution

Size: 75mm*54mm*30mm

Weight: 120g



Packaging included:



1X ToolkitRC M4AC Charger (XT60)






<p><span>Charge 2-4S batteries by plugging this charger right into the wall, no need for a bulky power supply.</span></p>
<p><span>Check out our other </span><a href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">Battery Chargers and Accessories</a><span>, and all our </span><a title="toolkitrc products for sale at racedayquads" href="https://www.racedayquads.com/collections/toolkitrc-products" target="_blank">ToolkitRC products</a><span>!</span></p>
<h3>Specifications</h3>
<ul>
<li>Input: AC100-240V@MAX30W</li>
<li>Battery Type: LiPo LiHV LiFe @1-4S</li>
<li>Charging Power: 0.5-2.5A@25W</li>
<li>Bal Cur. : 200mA @2-4S</li>
<li>Charging accuracy: &lt0.005V</li>
<li>Display: LCD IPS 1.54 inch 240*240 resolution</li>
<li>Size: 75mm*54mm</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x ToolkitRC M4AC 30W 2.5A 1-4S AC Smart Charger- XT60</li>
</ul>
<p> </p>

Charge 2-4S batteries by plugging this charger right into the wall, no need for a bulky power supply. Check out our other Battery Chargers and Accessories, and all our ToolkitRC products! Specifications Input: AC100-240V@MAX30W Battery Type: LiPo LiHV LiFe @1-4S Charging Power: 0.5-2.5A@25W Bal Cur. : 200mA @2-4S Charg

ISDT PD60 60W 6A 2-4S DC Charger w/ USB-C Input

iSDT

The iSDT PD60 60W 6A 1-4S USB-C Input Battery Charger (XT-60) includes a USB-C Power input that supports QC 2.0/3.0 and USB PD 2.0/3.0 and 5-20V voltage input. This battery charger can charge up to 4S LiPo batteries

The iSDT PD60 60W 6A 1-4S USB-C Input Battery Charger (XT-60) includes a USB-C Power input that supports QC 2.0/3.0 and USB PD 2.0/3.0 and 5-20V voltage input. This battery charger can charge up to 4S LiPo batteries. 

VIDEO: 4S

iSDT PD60 60W 6A 1-4S USB-C Input Battery Charger - XT-60

The iSDT PD60 60W 6A 1-4S USB-C Input Battery Charger (XT-30) includes a USB-C Power input that supports QC 2.0/3.0 and USB PD 2.0/3.0 and 5-20V voltage input. This battery charger can charge up to 4S LiPo batteries.

The iSDT PD60 60W 6A 1-4S USB-C Input Battery Charger (XT-30) includes a USB-C Power input that supports QC 2.0/3.0 and USB PD 2.0/3.0 and 5-20V voltage input. This battery charger can charge up to 4S LiPo batteries. 

VIDEO: 4S

iSDT PD60 60W 6A 1-4S USB-C Input Battery Charger - XT-30

<p><strong>The PD60 has an XT60 charge port.</strong></p>
<p>This ISDT charger takes an input voltage from USB-C, making it extremely convenient to use on the go. </p>
<p>Check out all<span> </span><a title="all chargers and charging accessories for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">our chargers &amp charging accessories</a>, as well as our<a title="all isdt FPV Products for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/isdt-products" target="_blank"><span> </span>ISDT selection</a>!</p>
<p><iframe src="https://www.youtube.com/embed/v9J2ZWS-meA" height="315" width="560" allowfullscreen="" allow="accelerometer autoplay encrypted-media gyroscope picture-in-picture" frameborder="0"></iframe></p>
<h3>Features</h3>
<ul>
<li>USB-C power input</li>
<li>Upgradeable firmware</li>
<li>Silent Heat Dissipation</li>
<li>Supports 1-4S charging<br>
</li>
</ul>
<h3>Specifications</h3>
<ul>
<li><span>Input voltage: DC 5V-20V</span></li>
<li><span>Output voltage: DC 1.0V-20V</span></li>
<li><span>Max Input Current: 3A</span></li>
<li><span>Charging Current: 1A/2A/3A/6A</span></li>
<li><span>Max Charging Power: 60W</span></li>
<li><span>Balance Current: 0.5A/Cell Max</span></li>
<li>
<span>Support Quick-Charge: PD2.0/3.0,QC 2.0/3.0 </span>( <strong>5V/1A input not supported</strong>)</li>
<li>
<span>Support Battery Types and Cell Count: LiFe, LiHV 1-4S, LiPo 1-4S, </span>NIMH, Cd 1-12S</li>
<li><span>Abnormal Voltage Alarm: Support</span></li>
<li><span>Incorrect Cell Count Setting Alarm: Support</span></li>
<li><span>Working temperature: 0-40°C</span></li>
<li><span>Storage temperature: -20-60°C</span></li>
<li><span>Dimension: 56x85x21mm</span></li>
<li><span>Weight: 87g</span></li>
</ul>
<h3><span>Includes</span></h3>
<ul>
<li><span>1x ISDT PD60 60W 6A 2-4S DC Charger w/ USB-C Input</span></li>
</ul>

The PD60 has an XT60 charge port. This ISDT charger takes an input voltage from USB-C, making it extremely convenient to use on the go.  Check out all our chargers &amp; charging accessories, as well as our ISDT selection! Features USB-C power input Upgradeable firmware Silent Heat Dissipation Supports 1-4S charging Sp

This ISDT charger takes input voltage from the new standard connector, USB-C, making it extremely convenient to use on the go. It has a variable charging current of 1A/2A/3A/6A and a max charging power of 60W. Making it powerful, yet still small quiet and portable! Check out all our Chargers and the rest of our ISDT Pr

JHEMCU

JHEMCU XT30 / XT60 Smoke Stopper

FPVELITE

<p class="kvgmc6g5 cxmmr5t8 oygrvhab hcukyx3x c1et5uql"><span>Avoid imminent disaster with the  JHEMCU  Smoke Stopper: A self-healing / resettable fuse in line of the power going to your quad.</span></p>
<p class="kvgmc6g5 cxmmr5t8 oygrvhab hcukyx3x c1et5uql"><span>Be sure to check out our <a href="https://www.racedayquads.com/collections/tools-and-building-supplies" target="_blank" title="tools and building supplies for sale at racedayquads" rel="noopener noreferrer">tools &amp building supplies</a>!</span></p>
<h3 class="kvgmc6g5 cxmmr5t8 oygrvhab hcukyx3x c1et5uql">Specifications</h3>
<ul>
<li>Connector: XT30 &amp XT60 (input and output)</li>
<li>Input voltage: 1-6S (3 - 30V)</li>
<li>Trip current: 1.0A</li>
<li>Hold current: 0.5A</li>
</ul>
<h3>Includes</h3>
<ul>
<li> 1x Jhemcu XT30 / XT60 Smoke Stopper</li>
</ul>

Avoid imminent disaster with the  JHEMCU  Smoke Stopper: A self-healing / resettable fuse in line of the power going to your quad. Be sure to check out our tools &amp; building supplies! Specifications Connector: XT30 &amp; XT60 (input and output) Input voltage: 1-6S (3 - 30V) Trip current: 1.0A Hold current: 0.5A Incl

Jhemcu XT30 / XT60 Smoke Stopper

ToolkitRC ADP-100 100W Battery Charger Power Supply - XT60

ToolKitRC ADP100 100W 20.0V 5A Power Supply Unit w/ XT60 Output

The ToolKitRC ADP100 100W Power Supply Unit power 100-240V AC TO 20.0V DC and can supply up to 20 amperes of continuous power.
Features

Safe case design (no bare metal or wire terminals)
Over Current Protection
Compact and portable

Specifica

ToolKitRC ADP100 Power Supply - US Plug
Specifications

Input voltage: AC 100-240V 50/60Hz
Input current: MAX 1A
Output voltage:MAX 20.0V
Output current: MAX 5.0A
Connector: XT60
Size: 90mm * 90mm * 32mm
Wight: 215g
Work temp: -10  -  40'C


ToolKitRC ADP100 Power Supply - US Plug Specifications Input voltage: AC 100-240V 50/60Hz Input current: MAX 1A Output voltage:MAX 20.0V Output current: MAX 5.0A Connector: XT60 Size: 90mm * 90mm * 32mm Wight: 215g Work temp: -10 - 40'C

ADP-100MB 100w Power Supply

A great power supply option for the new ToolkitRC M6D Dual Port Charger and pretty much any DC charger with XT-60 input.We also carry the higher power 180W version of this power supply.Checkout all our Chargers and Power supplies and out ToolkitRC Collection Features Plug-and-Play Use Safe Case Design  Over Current Pro

<p>The ToolKitRC ADP-100 is a great option for chargers requiring a power supply. This power supply comes with an XT60 output <span>ready to plug into the </span><a href="https://www.racedayquads.com/products/toolkitrc-m8-battery-300w-15a-charger-cell-checker-servo-tester-receiver-tester-variable-dc-output-controller" target="_blank" title="toolkitrc m8 lipo charger for sale at racedayquads" rel="noopener noreferrer">M8</a><span>, and other brands like </span><a href="https://www.racedayquads.com/collections/isdt-products" target="_blank" title="isdt chargers for sale at racedayquads" rel="noopener noreferrer">ISDT</a><span>, </span><a href="https://www.racedayquads.com/collections/ultra-power" target="_blank" title="ultra power chargers for sale at racedayquads" rel="noopener noreferrer">Ultra Power</a><span>, and any charger with XT60 input!</span><br></p>
<p>Check out all our <a href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank" title="all lipo chargers and accessories for sale at racedayquads" rel="noopener noreferrer">Chargers &amp Charging Accessories</a> <span>and all our</span><span> </span><a href="https://www.racedayquads.com/collections/toolkitrc-products" target="_blank" title="toolkitrc products for sale at racedayquads" rel="noopener noreferrer">ToolkitRC products</a><span>!</span></p>
<h3><span>Features</span></h3>
<ul>
<li>Plug-and-Play Use</li>
<li>Safe Case Design (no bare metal or wire terminals)</li>
<li>Over Current Protection</li>
</ul>
<h3><span>Specifications</span></h3>
<div>
<ul>
<li>Input: AC 100-240V  50-60HZ  1.5A</li>
<li>Output voltage: MAX 20.0V</li>
<li>Output current: MAX 5.0A</li>
<li>Connector: XT60</li>
<li>Size: 90mm * 90mm * 32mm</li>
<li>Wight: 215g</li>
<li>Work temp: -10-40°C</li>
</ul>
</div>
<ul></ul>
<h3>Includes</h3>
<ul>
<li>1x ToolkitRC ADP-100 100W Battery Charger Power Supply - XT60</li>
<li>1x US Power Cord</li>
</ul>

Use the XT60 ToolkitRC ADP-100 100W Battery Charger Power Supply for any charger you have that requires an external power source. If it has an XT60 input, you can power it!

XT60 ToolkitRC ADP-100 100W Battery Charger Power Supply for Sale

ToolkitRC M6D 500W 25A 1-6S Dual Channel DC Smart Charger

ToolkitRC's new AC/DC 2 channel charger operates on an internal 200W AC power supply or up to 700W on DC power! A 65W Type-C interface supports fast charging of laptops, tablets, and other devices. Other features include a bright 3.5" color display with a wide viewing angle, a metal scroll wheel, and the solid ToolkitRC build quality you expect!
Features

Two independent charging channels
Operates on internal 200W AC power supply or 7-28V DC power

65W USB-C fast charge port
Metal Dial Wheel

3.5" IPS Color Display 

Specifications

Input voltage: DC 7.0-28.0V  @MAX 30A | AC 100-240V @ MAX 2.5A
Type of battery: Lipo  LiHV  LiFe Li-Ion @1-6S | NiMh @1-16S   Pb @1-10S
Balance current: 1000mA @2-6S
Balance accuracy: &lt0.005V
Charger power: 0.1-15A @350Wx2  (Asynchronous mode) | 0.1-25A @700W  (Synchronous mode)
Discharge power: 350W  @MAX 15Ax2（Recycle mode) | 15W@3A *2 (Normal mode)
USBC power: MAX 65W 3.25A @20.0V  or Upgraded
USBC protocol: PD,QC,AFC,FCP,SCP,PE,SFCP,VOC
Battery voltage: 1.0V-5.0V@1-6S
Internal resistance: 1-100mR@1-6S
Product size: 127x106x57 mm
Product weight:520g
Pack size: 158x134x63 mm
Pack weight: 700g
LCD: IPS  3.5 inch LCD 480x320 Pixel

Includes

1x ToolkitRC M6DAC 200W 15A Dual Channel AC/DC Smart Charger



ToolkitRC's new AC/DC 2 channel charger operates on an internal 200W AC power supply or up to 700W on DC power! A 65W Type-C interface supports fast charging of laptops, tablets, and other devices. Other features include a bright 3.5" color display with a wide viewing angle, a metal scroll wheel, and the solid ToolkitR

M6D AC Dual Charger

ToolkitRC's new AC/DC 2 channel charger operates on an internal 200W AC power supply or up to 700W on DC power! A 65W Type-C interface supports fast charging of laptops, tablets, and other devices. Other features include a bright 3.5" color display with a wide viewing angle, a metal scroll wheel, and the solid ToolkitRC build quality you expect! Features Two independent charging channels Operates on internal 200W AC power supply or 7-28V DC power 65W USB-C fast charge port Metal Dial Wheel 3.5" IPS Color Display  Specifications Input voltage: DC 7.0-28.0V  @MAX 30A | AC 100-240V @ MAX 2.5A Type of battery: Lipo  LiHV  LiFe Li-Ion @1-6S | NiMh @1-16S   Pb @1-10S Balance current: 1000mA @2-6S Balance accuracy: &lt;0.005V Charger power: 0.1-15A @350Wx2  (Asynchronous mode) | 0.1-25A @700W  (Synchronous mode) Discharge power: 350W  @MAX 15Ax2（Recycle mode) | 15W@3A *2 (Normal mode) USBC power:

ToolKitRC M6D 500W 15A 1-6S DC Dual Smart Charger

The M6D Dual Smart Charger features asynchronous automatic power distribution and synchronous output for greater power. It includes an optimized heat dispersing system to dissipate high power heat in no time! You will find an easy-to-navigate system,

<p>The ToolkitRC M6D is a great option to safely charge multiple batteries at the same time. <br></p>
<p><span color="#000000">A power supply is required to use this charger, check out the RDQ <a title="RDQ 24V 15A 360W Power Supply - Plug &amp Play Charger PSU" href="https://www.racedayquads.com/products/rdq-24v-15a-360w-power-supply" target="_blank">360W </a>and <a title="RDQ Power Supply - 400w/16.7a/24v - Plug and Play for ISDT Chargers and Others" href="https://www.racedayquads.com/products/rdq-power-supply-400w-16-7a-24v-plug-and-play-for-isdt-chargers-and-others" target="_blank">500W </a>power supplies.</span></p>
<p>Check out our other <a href="https://www.racedayquads.com/collections/battery-chargers-accessories" target="_blank">Battery Chargers and Accessories</a>, and all our<span> </span><a title="toolkitrc products for sale at racedayquads" href="https://www.racedayquads.com/collections/toolkitrc-products" target="_blank">ToolkitRC products</a>!</p>
<p><iframe src="https://www.youtube.com/embed/6L1-p-zo4bU" height="315" width="560" allowfullscreen="" allow="accelerometer autoplay encrypted-media gyroscope picture-in-picture" frameborder="0"></iframe><br></p>
<h3>Features</h3>
<ul>
<li>2.4" LCD screen</li>
<li>Dual channel</li>
<li>Asynchronous and synchronous modes</li>
<li>Cell checker</li>
<li>USB 5V output</li>
</ul>
<h3>Specifications</h3>
<ul>
<li>Input: 7-28V@MAX30A</li>
<li>Battery Type:</li>
<ul>
<li>LiPo LiHV LiFe Lion@1-6S</li>
<li>NiMh @1-16S Pb @1-10S</li>
</ul>
<li>Bal Cur. : 800mA @2-6S</li>
<li>Accuracy: &lt0.005V</li>
<li>Charging Power:</li>
<ul>
<li>0.1-15A@250W *2（Asynchronous mode）</li>
<li>0.1-25A@500W（Synchronous mode）</li>
</ul>
<li>Discharging Power:</li>
<ul>
<li>0.1-15A@250W*2 Recycle Mode</li>
<li>0.1-3A@12W*2 Normal Mode</li>
</ul>
<li>USB: 2.1A@5V upgrade@USB3.0</li>
<li>Battery Voltage: 1.0V-5.0V @1-6S</li>
<li>Battery Internal Resistance: 1-100mR @1-6S</li>
<li>Display: LCD IPS 2.4 inch 320*240 resolution</li>
<li>Size: 98mm*68mm*35mm</li>
<li>Weight: 220g</li>
<li>Size: 108.5mm*80.5mm*46mm</li>
<li>Weight: 300g</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x ToolkitRC M6D Dual Channel 500W 25A DC Battery Charger</li>
</ul>
<p><img title="ToolkitRC M6D Dual Channel 500W 25A DC Battery Charger for Sale" alt="ToolkitRC M6D Dual Channel 500W 25A DC Battery Charger for Sale" src="https://cdn.shopify.com/s/files/1/1285/4651/files/aa.jpg?v=1591400139"></p>
<h3><br></h3>
<ul></ul>

If you need to safely charge multiple batteries at once, look no further than the ToolkitRC M6D Dual Channel 500W 25A DC Battery Charger. This incredible charger is fast, safe, and durable!

ToolkitRC M6D Dual Channel 500W 25A DC Battery Charger for Sale


XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging


 


 

 

 



 





1.2.4" LCD screen

2.Dual Channel

3.Asynchronous and synchronous modes

4.Cell checker

5.USB 5V Output




Specification:

 

Input: 7-28V@MAX30A

Battery Type: LiPo LiHV LiFe Lion@1-6S

                        NiMh @1-16S Pb @1-10S

Bal Cur. : 800mA @2-6S

Accuracy: &lt0.005V

Charging Power: 0.1-15A@250W *2（Asynchronous mode）

                              0.1-25A@500W（Synchronous mode）

Discharging Power:

0.1-15A@250W*2 Recycle Mode

0.1-3A@12W*2 Normal Mode

USB: 2.1A@5V upgrade@USB3.0

Battery Voltage: 1.0V-5.0V @1-6S

Battery Internal Resistance: 1-100mR @1-6S

Display: LCD IPS 2.4 inch 320*240 resolution

Size: 98mm*68mm*35mm

Weight: 220g

Size: 108.5mm*80.5mm*46mm

Weight: 300g

 

Packaging included:

 

1X ToolkitRC M6D Charger



















 














 














 














 














 

















XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging           1.2.4" LCD screen 2.Dual Channel 3.Asynchronous and synchronous modes 4.Cell checker 5.USB 5V Output Specification:   Input: 7-28V@MAX30A Battery Type: LiPo LiHV LiFe Lion@1-6S                         NiMh @1-16S Pb @1-10S Bal Cur. : 800mA @2-6S Accuracy: &lt;0.005V Charging Power: 0.1-15A@250W *2（Asynchronous mode）                               0.1-25A@500W（Synchronous mode） Discharging Power: 0.1-15A@250W*2 Recycle Mode 0.1-3A@12W*2 Normal Mode USB: 2.1A@5V upgrade@USB3.0 Battery Voltage: 1.0V-5.0V @1-6S Battery Internal Resistance: 1-100mR @1-6S Display: LCD IPS 2.4 inch 320*240 resolution Size: 98mm*68mm*35mm Weight: 220g Size: 108.5mm*80.5mm*46mm Weight: 300g   Packaging included:   1X ToolkitRC M6D Charger

ToolkitRC M6D 500W 15A High Power DC Dual Smart Charger Discharger for 1-6S Lipo LiHV Lion NiMh Pb Battery - Black


XT60 Female Plug to XT30 Male Plug Cable Adapter for Battery Charging


 


 

 

 



 





1.2.4" LCD screen

2.Dual Channel

3.Asynchronous and synchronous modes

4.Cell checker

5.USB 5V Output




Specification:

 

Input: 7-28V@MAX30A

Battery Type: LiPo LiHV LiFe Lion@1-6S

                        NiMh @1-16S Pb @1-10S

Bal Cur. : 800mA @2-6S

Accuracy: &lt;0.005V

Charging Power: 0.1-15A@250W *2（Asynchronous mode）

                              0.1-25A@500W（Synchronous mode）

Discharging Power:

0.1-15A@250W*2 Recycle Mode

0.1-3A@12W*2 Normal Mode

USB: 2.1A@5V upgrade@USB3.0

Battery Voltage: 1.0V-5.0V @1-6S

Battery Internal Resistance: 1-100mR @1-6S

Display: LCD IPS 2.4 inch 320*240 resolution

Size: 98mm*68mm*35mm

Weight: 220g

Size: 108.5mm*80.5mm*46mm

Weight: 300g

 

Packaging included:

 

1X ToolkitRC M6D Charger



















 














 














 














 














 

















This is the new ToolkitRC M6D dual port 500w charger, a great way to charge multiple batteries without the risk of using a parallel charging board.The M6D is a DC charger so make sure to pickup a power supply for it from our wide variety of Power Supplies!Checkout all our chargers and our ToolkitRC collection. Features

ToolkitRC M6D Dual Channel 500W 25A DC Battery Charger

Another great charger from ToolKitRC! This charger features dual outputs rated for 250w each, easy to navigate menus, a whopping 800ma balance capacity, all while keeping a compact size!

Get the The ToolKitRC M6D Dual Lipo Charger - 500W shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 