FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

T-Motor

T-Motor Mini F45A 32Bit 45A 3-6S 20x20 4in1 ESC

T-Motor fits a powerful ESC into a tiny little package. Also available in Solder-Free!
Specifications

Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Supported
Galvanometer: Supported
DSHOT 150/DSHOT 300/DSHOT 600/PROSHOT 1000
Backward Compatible with Oneshot125/Oneshot42/Multishot
Betaflight Galvanometer Ratio: 200
Mounting Pitch: 20*20mm
Weight: 9.2g

Includes

1x F45 32Bit 45A 3-6S 20x20 4in1 ESC 

Wiring Diagram


Solder Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for any soldering! T-Motor fits a powerful ESC into a tiny little package. With the upgrade of solder-free, you can get your ESC changed in a heartbeat or swap motors without opening up the frame. If you want to spend less time on repairs and more time on flying, this is the ESC for you!

F45 32Bit 45A 3-6S 20x20 4in1 ESC

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC has a 45A persistent current and 55A peak! The Mini F45A 4-in-1 ESC comes with reliable high quality mosfet and high-performance 32-BIT main controller it also supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, PROSHOT1000 and is also compatible with Ones

T-Motor Mini F45A 6S 4-in-1 ESC (BLHeli32) - 20x20mm

Tiger Motors

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power, all in a 20x20 ESC!

T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC

T-Motor Hobby

Behold, the legendary mystical scroll that reveals the power of the T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC!
This sacred artifact is imbued with immense power, thanks to its high-performance 32-BIT main control. It supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000, and is compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals.
For the ultimate combination of FC and ESC, pair the Mini F45A with the T-Motor Mini F7 and unlock a new level of flying.
But the power doesn&#39t end there. Check out all our 20x20 FCs and all our T-Motor products and discover the full extent of your aerial potential.
Specifications:

Brand: T-Motor
Item Name: MINI F45A 4IN1 ESC
Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Support
Mounting pitch: 20x20mm
Weight: 9.2g
Betaflight galvanometer ratio: 200
EAN: 6971360351528


Includes:

1x T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC


Unleash the power of the T-Motor Mini F45A 6S 4in1 ESC. High-performance 32-BIT control, compatibility with popular throttle signals. Explore now!

T-Motor Mini F45A 6S 32Bit 4in1 ESC from WREKD Co.

T-Motor Mini F45A 6S 32Bit 4in1 ESC

TMOTOR

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with a high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals. 
Pair this ESC with the T-Motor Mini F7 for the ultimate combination of FC and ESC. 
Check out all our 20x20 FCs and all our T-Motor products!
Specification

Brand: T-Motor
Item Name: MINI F45A 4IN1 ESC
Input Voltage: 3-6S
ESC Firmware: BLHeli32
Telemetry: Support
Mounting pitch: 20x20mm
Weight: 9.2g
Betaflight galvanometer ratio: 200


Includes

1x T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC


The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with a high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, and PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals.  Pai

Five33

The T-Motor Mini F45A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Mini F45A 4-in-1 ESC comes with the high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals. 















The T-Motor Mini F45A 6S is a 4-in-1 ESC that comes with a 20x20 mounting pattern and 32-BIT for high performance and fast response! 

T-Motor Mini F45A 3-6S 32-Bit 20x20 4-in-1 ESC

Single / 4-in-1 ESC

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

ESC Stack Mount

Firmware

Minimum Voltage

Maximum Voltage

SpeedyBee

SpeedyBee 50A 8Bit 3-6S 30x30 4in1 ESC

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor.  We also carry the F405 V3 Stack!  Check out all ou

SpeedyBee BLS 8Bit 50A 3-6S 4in1 ESC - 30x30mm

RaceDayQuads

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor. 
Specifications
BLS 50A 3-6S 4in1 ESC

Firmware: SpeedyBee BLS 50A

Continuous Current: 50Ax4

Burst Current: 55A(5S)
Power input: 3S - 6S LiPo

Power output: VBAT

Current Sensor: Supported (Scale=386 Offset=0)

Mounting: 30.5x0.5mm, 4mm hole size

Dimension: 45.6(L)x44(W)x6.1mm(H)

Weight: 13.8g with heat sink


Includes

1x BLS 50A 4in1 ESC
1x 35V 1500uF low ESR capacitor
5x Silicone O-ring M3
1x XT60 70mm power cable
1x SH1.0mm 8pin 30mm Cable
5x Silicone grommet M3*8.1mm

Wiring diagram


The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor.  Specifications BLS 50A 3-6S 4in1 ESC Firmware: Spe

SpeedyBee BLS 8Bit 50A 3-6S 30x30 4in1 ESC

RUNCAM

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor. 
Check out all our 30x30 ESCs and all our Speedy Bee products!
Specifications

BLS 50A 3-6S 4in1 ESC

Firmware: SpeedyBee BLS 50A

Continuous Current: 50Ax4

Burst Current: 55A(5S)
Power input: 3S - 6S LiPo

Power output: VBAT

Current Sensor: Supported (Scale=386 Offset=0)

Mounting: 30.5x0.5mm, 4mm hole size

Dimension: 45.6(L)x44(W)x6.1mm(H)

Weight: 13.8g with heat sink


Includes

1x BLS 50A 4in1 ESC
1x 35V 1500uF low ESR capacitor
5x Silicone O-ring M3
1x XT60 70mm power cable
1x SH1.0mm 8pin 30mm Cable
5x Silicone grommet M3*8.1mm

Wiring diagram


The SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC isn't just built for convenience, it is built for the performance that will fulfill all of your in flight needs. Choose the top ESC today!

SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC For Sale

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor.  Check out all our 30x30 ESCs and all our Speedy Be

SpeedyBee BLS 8Bit 50A 3-6S 30x30 4in1 ESC from WREKD Co.

The SpeedyBee 50A 3-6S BLHeli_S 4-in-1 ESC - 30x30 features a TVS diode, which protects the board from voltage spikes.

SpeedyBee 50A 3-6S BLHeli_S 4-in-1 ESC - 30x30

T-Motor F55A Pro II 32Bit 55A 3-6S 30x30 4in1 ESC w/ BEC

The F55 Pro II updates the original F55 with a new heatsink design, LED, and increased the BEC current to 10V@2A.

T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC w/ BEC



Solder-Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for most soldering! Check out our other solder-free options.




The T-motor F55 Pro II is a high-performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load.
Now, you can get this tried and true ESC in a solder-free version! This allows you to quickly connect and change solder-free motors in seconds.  Now you can spend less time repairing and more time in the skies!
Specifications

Input Voltage: 3-6S
Max. Continuous Current: 55A
Max. Burst Current: 75A (10sec)
Firmware: BLheli32
Current Sensor: Yes
Mounting Dimensions: 30x30mm
Dimensions: 45.4x41x7.3mm
Weight: 17.5g (Including Heatsink)

Support DSHOT150/300/600/1200

Includes

1x F55 PRO II 32Bit 55A 3-6S 30x30 4in1 ESC Solder-Free
5x Damping Rubbers
1x 12AWG-130MM with XT60 Soldered input wires
5x Cable Protectors
1x Capacitor




Solder-Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for most soldering! Check out our other solder-free options. The T-motor F55 Pro II is a high-performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load. Now, you can get this tried and true ESC in a solder-free version! This allows you to quickly connect and change solder-free motors in seconds. Now you can spend less time repairing and more time in the skies!

F55 PRO II 32Bit 55A 3-6S 30x30 4in1 ESC Solder-Free

Solder-Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for most soldering! Check out our other solder-free options. The T-motor F55 Pro II is a high-performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load. Now, you can get this tried and true ESC in a solder-free version! This allows you to quickly connect and change solder-free motors in seconds. Now you can spend less time repairing and more time in the skies! Specifications Input Voltage: 3-6S Max. Continuous Current: 55A Max. Burst Current: 75A (10sec) Firmware: BLheli32 Current Sensor: Yes Mounting Dimensions: 30x30mm Dimensions: 45.4x41x7.3mm Weight: 17.5g (Including Heatsink) Support DSHOT150/300/600/1200 Includes 1x F55 PRO II 32Bit 55A 3-6S 30x30 4in1 ESC Solder-Free 5x Damping

The T-motor F55 Pro II is a high performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load.
Specifications

Input Voltage: 3-6S
Max. Continuous Current: 55A
Max. Burst Current: 75A (10sec)
Firmware: BLheli32
Current Sensor: Yes
Mounting Dimensions: 30x30mm
Dimensions: 45.4x41x7.3mm
Weight: 17.5g (Including Heatsink)

Support DSHOT150/300/600/1200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
5x Damping Rubbers
1x 12AWG-130MM with XT60 Soldered input wires
2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor


The T-motor F55 Pro II is a high performance ESC for the most demanding pilots. With carefully selected materials and a modest PCB layout, it will provide stable flight and reliability under load. Specifications Input Voltage: 3-6S Max. Continuous Current: 55A Max. Burst Current: 75A (10sec) Firmware: BLheli32 Current 

F55 PRO II 32Bit 55A 3-6S 30x30 4in1 ESC

The F55A Pro II is a premium-built 4in1 ESC from T-Motor. Fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware.
Check out all our 30x30 ESCs and all our T-Motor products!



























Specifications

Continuous current: 4x55A
BLHeli_32 32bit
Burst current: 4x75A
BEC Output: 10V @2.0A
Size: 45x41x7.3mm
Weight: 17.3g (Including Heatsink)
Support DSHOT150/300/600/1200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
5x Damping Rubbers
1x 12AWG-130MM with XT60 Soldered input wires
2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor

 

The F55A Pro II is a premium-built 4in1 ESC from T-Motor. Fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware. Check out all our 30x30 ESCs and all our T-Motor products! Specifications Continuous current:

T-Motor F55A Pro II 32Bit 55A 3-6S 30x30 4in1 ESC from WREKD Co.

T-Motor F55A Pro II 32Bit 55A 3-6S 30x30 4in1 ESC

For convenience and performance, you need the T-Motor F55A Pro 55A 3-6s BLHeli32 4-in-1 ESC. This easy to use package has the power you need at a price you'll love.

T-Motor F55A Pro 55A 3-6s BLHeli32 4-in-1 ESC for Sale



The latest version of T-Motor&#39s F55A Pro II, the F3 ESC, offers higher speeds and enhanced performance perfect for intense racing. Its 6S capability and 75A burst current allow a sustained 55A draw, while BLHeli32 firmware and 32-bit technology ensure maximum safety and efficiency. An imported MOSSFET helps reduce heat and boost safety too.
 
FEATURES

High-performance 32-bit microprocessor with the running frequency of up to 48MHz for an excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshotl 25 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshotl 200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.
Onboard 10V BEC, powering different accessories such as FC, VTx, Camera and LED lights and etc.

SPECIFICATIONS


Continuous current: 4*55A
BLHeli_32 32bit
Burst current: 4*75A
BEC Output: 10V @2.0A
Size: 45x41x7.3mm
Weight: 17.3g (Including Heatsink)
Support DSHOT150/300/600/1200

INCLUDES

1 x F55A Pro II 4 in 1 Brushless ESC
5 x Damping Rubbers
1 x 12AWG-130MM with XT60 Soldered input wires
2 x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1 x Capacitor



The latest version of T-Motor's F55A Pro II, the F3 ESC, offers higher speeds and enhanced performance perfect for intense racing. Its 6S capability and 75A burst current allow a sustained 55A draw, while BLHeli32 firmware and 32-bit technology ensure maximum safety and efficiency. An imported MOSSFET helps reduce heat

T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC from WREKD Co.

T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC

The new T-Motor's update of the F55A Pro II, the MCU F3 is a much faster ESC with high performance for demanding racing events. Just like the original, The F3 is fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32

T-Motor F55A PROII-6S-4IN1FEATURESHigh-performance 32-bit microprocessor with the running frequency of up to 48MHz for an excellent performance.BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.The code supports regular 1-2ms pulse width input, as well as Oneshotl 25 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).Dshot signaling is supported at any rate up to at least Dshotl 200. The input signal is automatically detected by the ESC upon power-up.The code also supports a beacon functionality, where the ESC will start beeping after a given ti...

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

T-Motor F55A PROII-6S-4IN1 - RMRC

T-Motor F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC with BEC

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC back and this time it's Lite! No heatsink for reduced weight but with the durability that you're used to from TMotor.
Check out the 30x30 4in1 ESCs and all our T-Motor products!
Specifications

Current: 45A
Peak Current: 55A(10S)
Input Voltage: 3-6S LiPo
Sofware: BLHeli_S
Mounting Pattern: 30x30, M3
Weight: 13g

Includes

1x T Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC


This T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC has no heatsink for reduced weight and durability. Visit our online store today!

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC For Sale

Introducing T-Motors new budget 30x30mm 4-in-1 ESC. Just because it's budget doesn't mean it isn't able to handle high current draw with a 55 amp burst rating. It also has large solder pads on the front and back of the board which make soldering a breeze. Pair it with the F411 Lite FC and you've got a great stack for f

T-Motor Velox V45A Lite ESC 3-6S BLheli-S 4IN1 ESC - 30x30mm

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC back and this time it&#39s Lite! No heatsink for reduced weight but with the durability that you&#39re used to from TMotor.
Check out the 30x30 4in1 ESCs and all our T-Motor products!
Specifications

Current: 45A
Peak Current: 55A(10S)
Input Voltage: 3-6S LiPo
Sofware: BLHeli_S
Mounting Pattern: 30x30, M3
Weight: 13g

Includes

1x T Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC


T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC back and this time it's Lite! No heatsink for reduced weight but with the durability that you're used to from TMotor. Check out the 30x30 4in1 ESCs and all our T-Motor products! Specifications Current: 45A Peak Current: 55A(10S) Input Voltage: 3-6S LiPo Sofware: BLHeli_S M

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC from WREKD Co.

Are you looking to make a sub 250g and need to shave off a few extra grams? Or a racer with a tight build that could use an extra few millimeters of space? Well your search for the perfect ESC is over now. The Velox Lite is the ESC you have been dreaming of!
Specifications

Input Voltage: 3-6S
Max. Continuous Current: 45A
Max. Burst Current: 55A (10 seconds max)
Firmware: BlHeliM
Current Sensor: Yes
Mounting Dimensions: 30x30mm
Weight: 13g

Includes

1x Velox Lite 8Bit 45A 3-6S 30x30 4in1 ESC


Are you looking to make a sub 250g and need to shave off a few extra grams? Or a racer with a tight build that could use an extra few millimeters of space? Well your search for the perfect ESC is over now. The Velox Lite is the ESC you have been dreaming of!

Velox Lite 8Bit 45A 3-6S 30x30 4in1 ESC

T-Motor VELOX V2 32Bit 45A 3-6S 30x30 4in1 ESC

TMotors popular Velox ESC is back and better than ever.
Upgrades include a better heatsink, higher quality MOSFETs, bigger soldering pads, and even a 10V/2A BEC for those of you flying DJI.
Check out the 30x30 4in1 ESCs and all our T-Motor products!
Features

Heatsink
10V/2A BEC for DJI
45A Current with 55A Peak
32Bit
Big soldering pads

Specifications

Current: 45A
Peak Current: 55A(10S)
BEC: 10V/2A
Input Voltage: 3-6S LiPo
Sofware: BLHeliSuite32
ESC Firmware: TMotor_32Bit
Size: 46.4x41x7mm
Mounting Hole: 30x30, M3
Weight: 21g

Includes

1xTMotor Velox V2 45A 32Bit 3-6S 30x30 4in1 ESC


Wiring Diagram

 

TMotors popular&nbsp;Velox ESC is back and better than ever. Upgrades include a better&nbsp;heatsink, higher quality MOSFETs, bigger soldering pads, and even a 10V/2A BEC for those of you flying DJI.

T-Motor Velox V2 32Bit 45A 3-6S 30x30 4in1 ESC

T-Motor Velox V2 45A 32Bit 3-6S 30x30 4in1 ESC For Sale at RaceDayQuads

T-Motor continues to support the FPV community by offering this fantastic budget option for a full-sized ESC. Able to keep up with the most aggressive of pilots, this ESC will make a great addition to your next build.
Features

Built-in heatsink to keep your stack cool
10V/2A BEC for DJI
45A Current with 55A Peak power output
32Bit architecture allows for greater degrees of control
Big soldering pads for easy installation

Specifications

Current: 45A
Peak Current: 55A(10S)
BEC: 10V/2A
Input Voltage: 3-6S LiPo
Sofware: BLHeliSuite32
ESC Firmware: TMotor_32Bit
Size: 46.4x41x7mm
Mounting Hole: 30x30, M3
Weight: 21g

Includes

1x Velox V2 32Bit 45A 4-6S 30x30 4in1 ESC


T-Motor continues to support the FPV community by offering this fantastic budget option for a full-sized ESC. Able to keep up with the most aggressive of pilots, this ESC will make a great addition to your next build.

Velox V2 32Bit 45A 4-6S 30x30 4in1 ESC

The V45A 4-in-1 ESC V2 by T-Motor is inspired by the&nbspVELOX V2207&nbspand&nbspV2306&nbspMotors!&nbspThe V45A V2 MOS has been upgraded with a 15% performance increase to fly in confidence even during high-current spikes.

The V45A 4-in-1 ESC V2 by T-Motor is inspired by the VELOX V2207 and V2306 Motors! The V45A V2 MOS has been upgraded with a 15% performance increase to fly in confidence even during high-current spikes.

T-Motor Velox V2 V45A 3-6S BLHeli_32 4-in-1 ESC

Foxeer

Foxeer Reaper 65A 128K 32Bit 3-8S 30x30 4in1 ESC

The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs.
Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings!
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 

Telemetry: Yes

Firmware: BLHeli_32

Target: FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Pattern: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC

Wiring Diagram


The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings! Specifications Input Voltage: 3-8S LiPo Max. Con

Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC from WREKD Co.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC






Firmware

FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9


Continuous /Burst Current
65A*4 / 100A*4


Input Voltage
DC 9V~40V (3-8S Lipo)



BEC

No



Telemetry

Supported



ESC Programming

BLHeli32



Input Signal

DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc.


Working Temperature
-20℃ ~ +55℃


Working Humidity
20～95%


Storage Temperature
-20℃ ~ +70℃


Mounting Hole
30.5X30.5mm,Φ4mm/M3


Dimension
42.5x42x5.5mm


Weight

14.8g




 











Firmware FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9 Continuous /Burst Current 65A*4 / 100A*4 Input Voltage DC 9V~40V (3-8S Lipo) BEC No Telemetry Supported ESC Programming BLHeli32 Input Signal DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature -20℃ ~ +55℃ Working Humidity 20～95% Storage Temperature -2

Foxeer Reaper F4 128K 65A BL32 4in1 ESC 3-8s

The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp TunedPairs best with the Foxeer F722 V2 Flight controller
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 


Firmware: BLheli_32

Target: FOXEER_Reaper4IN1_65A_128_Multi_32_8
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Dimensions: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC
1x AMASS XT60H Pigtail
1x 560uf 35V Capacitor



The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp; TunedPairs best with the Foxeer F722 V2 Flight controller Specifications I

Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC

The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp; TunedPairs best with the Foxeer F722 V2 Flight controller
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 


Firmware: BLheli_32

Target: FOXEER_Reaper4IN1_65A_128_Multi_32_8
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Dimensions: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC
1x AMASS XT60H Pigtail
1x 560uf 35V Capacitor



WREKD is a family-owned & operated, leading online FPV super-store based in the United States specializing in FPV racing / freestyle / tiny / micro whoop drones, parts, gear, and accessories. We offer fast, domestic, same-day shipping with the quickest delivery to anywhere in the U.S.A.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 4in1 ESC - 30x30mm from WREKD Co.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 4in1 ESC - 30x30mm

The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out all our 30x30mm Electronic Speed Controllers and the rest of our Foxeer Products! Specifications Input Voltage: 3-8S LiPo

FOXEER

Flycolor

Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC























The Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience for high-end FPV. Achieve more security for your flights with the Trinx G20!











Check out all our 20x20 ESCs and all our Flycolor Products!











FEATURES

ARM 32-bit Cortex MCU STM32G0, frequency up to 64 MHz.
PWM frequency up to 128K, high frequency for higher throttle makes
running smoother.
Compared with the previous generation of ESC, the ESC firmware is
optimized, making the throttle linearity smoother and the response faster.
Miniaturized and lightweight design, better routing, and component layout.
20x20 mounting holes to meet the installation requirements of diversified
frames.
Built-in current sensor and VBAT output.
Supports regular 1-2ms pulse width input, as well as Oneshot125
(125-250us), Oneshot42 (41.7-83.3us) and Multshot (5- 25us). The input
signal is automatically detected by the ESC upon power-up.
All Dshot and Proshot signals are supported.
Damped light does regenerative braking, causing very fast motor
retardation, and inherently also does active freewheeling.
Supports higher power load, more suitable for violent flight of racing drones.
Conformal coating for extra protection

Large soldering tabs

Low ESR capacitor and XT60 cable included

Specification

Model: Flycolor TRINX G20
Con. Current: 60A
Burst Current: 70A (10s)
BEC: No BEC
LiPo cells: 3-6S
Weight: 14.4g
Size: 44x36x6.3mm
Mounting: 20x20mm,M3
Configurator: BLHeliSuite32 
Firmware: Flycolor_Raptor_5

Includes

1x Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC
4x Silicone vibration absorber 

5x O-Ring 
1x Power cable+XT60 
1x FC/ESC connecting wire 
1x Low ESR capacitor 
1x Aluminum heat sink 


The Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience for high-end FPV. Achieve more security for your flights with the Trinx G20! Check out all our 20x20 ESCs

Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC from WREKD Co.

FlyColor

Enhance your drone's performance with the Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC.&nbsp

Enhance your drone's performance with the Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC. 

Flycolor Trinx G20 60A 4-in-1 BLHeli_32 ESC - 20x20

Flycolor Trinx G5 32Bit 60A 3-6S 30x30 4in1 ESC

Caddx

Unleash the power of your racing drone with the Flycolor Trinx G5 60A 4-in-1 BLHeli_32 ESC - 30x30.&nbsp

Unleash the power of your racing drone with the Flycolor Trinx G5 60A 4-in-1 BLHeli_32 ESC - 30x30. 

Flycolor Trinx G5 60A 4-in-1 BLHeli_32 ESC - 30x30

T-Motor Cine 80A 5-12S 32bit ESC

Experience superior performance with the T-Motor Cine 80A 12S ESC.&nbsp

Experience superior performance with the T-Motor Cine 80A 12S ESC. 

T-Motor Cine 80A 5-12S BLHeli_32 ESC

T-Motor VELOX V50A SE 32Bit 4in1 ESC

T-Motor VELOX V50A-SE 3-6S BLHeli_32 4-in-1 ESC

T-Motor VELOX V50A-SE 3-6S BLHeli_32 4-in-1 ESC - RMRC

The T-Motor Velox V50A SE 4-In-1 is a high-performance ESC from one of the best manufacturers in the hobby. With higher quality MOSFETS, large solder pads and more features, this is certainly a worthy upgrade. Check out our other Electronic Speed Controllers and all the T-Motor Products! Collection. Specifications: Mod

T-Motor Velox V50A SE 6S BLheli-32 4IN1 ESC - 30x30mm














T-Motor V50A SE 50A 32bit 3-6S ESC is the perfect solution for powerful and efficient flights. With its 32-bit processor, 3-6S input power, and 30x30mm size, this ESC is designed to give you solid flight performance. Reliable, secure, and efficient - this ESC is engineered to help you maximize your time in the sky.













Check out the 30x30 4in1 ESCs and all our T-Motor products!

Specification

MCU: AT32F421

Input Voltage: 3-6S

Current: 50A

Peak Current(5S): 60A

Size: 41x44.4x5.8mm

Mounting Holes: 30.5x30.5/Φ4mm
Weight: 12.3g

Includes

1x T-Motor V50A SE 50A 32Bit 3-6S 30x30 4in1 ESC


T-Motor V50A SE 50A 32bit 3-6S ESC is the perfect solution for powerful and efficient flights. With its 32-bit processor, 3-6S input power, and 30x30mm size, this ESC is designed to give you solid flight performance. Reliable, secure, and efficient - this ESC is engineered to help you maximize your time in the sky. Che

T-Motor V50A SE 50A F4 32Bit 3-6S 30x30 4in1 ESC from WREKD Co.

T-Motor V50A SE 50A F4 32Bit 3-6S 30x30 4in1 ESC

Introducing the T-Motor Velox V50A SE 6S BLHeli_32 4-in-1 ESC, the pinnacle of electronic speed controllers for high-performance drones. 

T-Motor Velox V50A SE 6S BLHeli_32 4-in-1 ESC

T-Motor F55A Pro III 3-8S 32Bit 4in1 ESC












T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won&#39t fail when compared to cheaper options. 











Check out all our 30x30 ESCs and all our T-Motor products!








Specifications

Voltage: 3-8S Lipo
Current: 4x55A
Peak Current: 4x65A

Firmware: Firmware: BLHELI_32
Telemetry: Support
BEC: No
Size: 44x40x7.5mm
Weight: 17.8g (Including Heatsink)Mounting Hole: 30.5x30.5mm/M3
Support Wide PWM Frequency: 16-128KHZ
Amperage Meter: 200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
1x 12AWG-130MM with XT60 Soldered input wires

2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor


T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won't fail when compared to cheap

T-Motor F55A Pro III 128K 32Bit 55A 3-8S 30x30 4in1 ESC from WREKD Co.

T-Motor F55A Pro III 128K 32Bit 55A 3-8S 30x30 4in1 ESC

Experience top-tier performance with the upgraded T-Motor F55A PRO III 4-in-1 ESC.&nbsp

Experience top-tier performance with the upgraded T-Motor F55A PRO III 4-in-1 ESC. 

T-Motor F55A PRO III 55A 3-8S BLHeli_32 4-in-1 ESC - 30x30

The new T-Motor's updated F55A Pro III, the MCU F3 is a much faster ESC with high performance for demanding racing events. Just like the original, The F3 is fully capable of pushing 8s with 65A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firm

T-Motor F55A PROIII 3S-8S BLHeli32 4IN1 ESC - 30x30mm












T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won't fail when compared to cheaper options. 











Check out all our 30x30 ESCs and all our T-Motor products!








Specifications

Voltage: 3-8S Lipo
Current: 4x55A
Peak Current: 4x65A

Firmware: Firmware: BLHELI_32
Telemetry: Support
BEC: No
Size: 44x40x7.5mm
Weight: 17.8g (Including Heatsink)Mounting Hole: 30.5x30.5mm/M3
Support Wide PWM Frequency: 16-128KHZ
Amperage Meter: 200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
1x 12AWG-130MM with XT60 Soldered input wires

2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor


HGLRC

HGLRC SPECTER 60A 8Bit 2-6S 30x30 4in1 ESC

This budget-friendly ESC is super easy to use with its large pads. Plus, the immersion gold high-tech design is temperature-resistant and current-resistant for long-term durability, Capable of supporting up to 60A of power and up to 70A burst current! 
Interested in the HGLRC SPECTER F405 V2 2-6S 30x30 Flight Controller - MPU6000?
 Check out our other 30x30 ESCs and all our HGLRC products!
Features

Blheli_S firmware can be replaced with Bluejay firmware to make RPM filters available. 
2S capable

Is capable of supporting 70A burst current for up to 10 Seconds 
Budget-friendly price point


 Specifications

Input Voltage: 2-6S Lipo (7.4V-22.8V)

Installing Hole: 30.5x30.5mm, M3

Support Protocols: DShot600/300/150/Oneshot125/42,MultiShot

Constant Current: 60A

Peak Current: 70A（10s）

ESC Firmware: BL_S (J-H-30)

Size: 37x42.7mm

Includes

1x HGLRC SPECTER 8Bit 60A 3-6S 30x30 4in1 ESC
1x Accessories  


This budget-friendly ESC is super easy to use with its large pads. Plus, the immersion gold high-tech design is temperature-resistant and current-resistant for long-term durability, Capable of supporting up to 60A of power and up to 70A burst current!  Interested in the HGLRC SPECTER F405 V2 2-6S 30x30 Flight Controlle

HGLRC SPECTER 8Bit 60A 2-6S 30x30 4in1 ESC from WREKD Co.

HGLRC SPECTER 8Bit 60A 2-6S 30x30 4in1 ESC

The HGLRC Specter 60A BL32 3-6S 4-in-1 ESC is a robust and high-performance electronic speed controller designed for demanding drone applications. 

HGLRC Specter 60A BLHeli_32 3-6S 4-in-1 ESC

SpeedyBee 55A 3-6S 4in1 ESC

Richer features, unbelievable price!












The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight.
Interested in the SpeedyBee F405 V4  BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 55A 4in1 ESC)?
Interested in the SpeedyBee F405 V4 3-6S 30x30 Flight Controller?
Check out all our 30x30 ESCs, and all our Speedy Bee products!












Features

User manual
ESC upgraded to 55A (70A burst) with heat sink 

Dual gyroscope power supply filtering 
1000uF huge filtering capacitor 
Large soldering pads








































Specifications

SpeedyBee BLS 55A 30x30 4-in-1 ESC

Firmware: BLHeli_S J-H-40

Wireless Configuration: Full Configuration Supported in the SpeedyBee app

PC Configurator Download Link: https://esc-configurator.com/
Continuous Current: 55A x 4
Burst Current: 70(10 seconds)
TVS Protective diode: Yes
External Capacitor: 1000uF Low ESR Capacitor(In the package)
ESC Protocol: DSHOT300/600
Power Input: 3-6S LiPo
Power Output: VBAT
Current Sensor: Support (Scale=400 Offset=0)
ESC Telemetry: Not supported
Mounting: 30.5 x 30.5mm( 4mm hole diameter)
Dimension: 45.6(L) x 44(W) x 8mm(H)
Weight: 23.5g

Includes

1x SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC


 Wiring Diagram



Richer features, unbelievable price! The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight. Interested in the SpeedyBee F405 V4  BLS 3-6S 30x30 Sta

SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC

SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC from WREKD Co.

Richer features, unbelievable price!












The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight.
 












Features

User manual
ESC upgraded to 55A (70A burst) with heat sink 

Dual gyroscope power supply filtering 
1000uF huge filtering capacitor 
Large soldering pads








































Specifications

SpeedyBee BLS 55A 30x30 4-in-1 ESC

Firmware: BLHeli_S J-H-40

Wireless Configuration: Full Configuration Supported in the SpeedyBee app

PC Configurator Download Link: https://esc-configurator.com/
Continuous Current: 55A x 4
Burst Current: 70(10 seconds)
TVS Protective diode: Yes
External Capacitor: 1000uF Low ESR Capacitor(In the package)
ESC Protocol: DSHOT300/600
Power Input: 3-6S LiPo
Power Output: VBAT
Current Sensor: Support (Scale=400 Offset=0)
ESC Telemetry: Not supported
Mounting: 30.5 x 30.5mm( 4mm hole diameter)
Dimension: 45.6(L) x 44(W) x 8mm(H)
Weight: 23.5g

Includes

1x SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC


 Wiring Diagram



Richer features, unbelievable price! The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight.   Features User manual ESC upgraded to 55A (70A burst) 

speeRuncA powerful 55A 4-in-1 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for durable build and smooth flight.   We also carry the F405 V4 FC and the F405 V4 Stack individually! Check out all our 30x30mm ESCs and the 

SpeedyBee 55A 3-6S BLS 4in1 ESC - 30x30mm

Elevate your drone's performance with the SpeedyBee BLS 55A 4-in-1 ESC.

SpeedyBee 55A BLHeli_S 4-in-1 ESC - 30x30

Hobbywing

Hobbywing XRotor Micro 65A 32Bit 4-6S 30x30 4in1 ESC


If you never want to worry about your your 4-in-1 again, Hobbywing&#39s XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is &quotbullet proof&quot. No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being transferred to the FC. From freestyle to racing, even long range will not challenge this ESC. The 65A Micro 4-in-1 ESC comes loaded with the latest 32bit tech (the third generation BLHeli_32 code can support up to 128KHz PWM output frequency), DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n play ESC connector or solder pads for the flight controller.
Features

High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.

The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.


Specifications

LiPo Power input: 3S-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output: 5V@ 0.6A
Input wires: 12AWG-130mm (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Weight: 15.0g 
Size: 52x42x6.6mm
Mounting holes: 30.5x30.5mm
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32

Includes

1x Hobbywing XRotor Micro 32bit 65A 4-6S 30x30 4in1 ESC w/ BEC


If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being tran

Hobbywing XRotor Micro 32Bit 65A 4-6S 30x30 4in1 ESC from WREKD Co.

Hobbywing XRotor Micro 32Bit 65A 4-6S 30x30 4in1 ESC

HOBBYWING

If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is "bullet proof". No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being transferred to the FC. From freestyle to racing, even long range will not challenge this ESC. The 65A Micro 4-in-1 ESC comes loaded with the latest 32bit tech (the third generation BLHeli_32 code can support up to 128KHz PWM output frequency), DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n play ESC connector or solder pads for the flight controller.
Check out all our 4in1 ESCs, all our 30x30 ECSs, and all our Hobbywing products!
Features

High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.

The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.






Specifications

LiPo Power input: 3S-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output: 5V@ 0.6A
Input wires: 12AWG-130mm (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Weight: 15.0g 
Size: 52x42x6.6mm
Mounting holes: 30.5x30.5mm
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32

Includes

1x Hobbywing XRotor Micro 32bit 65A 4-6S 30x30 4in1 ESC w/ BEC


Hobbywing's XRotor 65A 4-in-1 ESC raises the bar for ESCs. Hobbywing electronics are rock solid and the 65A ESC is no exception. Extra focus was put into this ESC to make it extremely reliable for any setup you are running.

Hobbywing XRotor Micro 65A 6S BLHeli_32 4-in-1 ESC - 30x30

If you never want to worry about your your 4-in-1 again, Hobbywing&#39s XRotor 65A raises the bar once again! From Captain Vanover himself, this thing is &quotbullet proof&quot. No matter what type of flight style you choose, this should be a go-to 4-in-1 for everyone! The soft mounts prevent most of the vibration from being transferred to the FC. From freestyle to racing, even long range will not challenge this ESC. The 65A Micro 4-in-1 ESC comes loaded with the latest 32bit tech (the third generation BLHeli_32 code can support up to 128KHz PWM output frequency), DShot1200, Larger FETs, direct pins for a capacitor, and a choice of either a plug n play ESC connector or solder pads for the flight controller.
Check out all our 4in1 ESCs, all our 30x30 ECSs, and all our Hobbywing products!
Features

High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.

The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.






Specifications

LiPo Power input: 3S-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output: 5V@ 0.6A
Input wires: 12AWG-130mm (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Weight: 15.0g 
Size: 52x42x6.6mm
Mounting holes: 30.5x30.5mm
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32

Includes

1x Hobbywing XRotor Micro 32bit 65A 4-6S 30x30 4in1 ESC w/ BEC


Speedybee Mini BLS V2 35A 8Bit 3-6S 20x20 4in1 ESC


This ESC provides four synchronized outputs with a continuous current of 35A, delivering strong power to drive all 2-4 inch and lightweight 5-inch quadcopters. Equipped with a TVS transient suppression diode onboard, it better absorbs surge voltage, providing enhanced protection for the ESC. All on a 20x20 platform with a value you can't beat! 




Check out all our 20x20 ESCs as well as the rest of our SpeedyBee products! 
Specifications

Firmware: BLHeli_S J-H-40

Continuous Current: 35A x 4

Burst Current: 45A(5seconds)

ESC Protocol: DSHOT300/600

Power Input: 3-6S LiPo

Power Output: VBAT(Battery voltage, used to power the flight controller)

Current Sensor: Support (Scale=250 Offset=-500)

Mounting: 20 x 20mm ∅3.5mm hole size, compatible with M2 and M3
screws/Silicone grommets.

Dimension: 35 x 35 x 5.5mm

Weight: 7.2g

Includes

1x Speedybee Mini BLS V2 8Bit 35A 3-6S 20x20 4in1 ESC

Wiring Diagram


This ESC provides four synchronized outputs with a continuous current of 35A, delivering strong power to drive all 2-4 inch and lightweight 5-inch quadcopters. Equipped with a TVS transient suppression diode onboard, it better absorbs surge voltage, providing enhanced protection for the ESC. All on a 20x20 platform wit

Speedybee Mini BLS V2 8Bit 35A 3-6S 20x20 4in1 ESC


This ESC provides four synchronized outputs with a continuous current of 35A, delivering strong power to drive all 2-4 inch and lightweight 5-inch quadcopters. Equipped with a TVS transient suppression diode onboard, it better absorbs surge voltage, providing enhanced protection for the ESC. All on a 20x20 platform with a value you can&#39t beat! 




Check out all our 20x20 ESCs as well as the rest of our SpeedyBee products! 
Specifications

Firmware: BLHeli_S J-H-40

Continuous Current: 35A x 4

Burst Current: 45A(5seconds)

ESC Protocol: DSHOT300/600

Power Input: 3-6S LiPo

Power Output: VBAT(Battery voltage, used to power the flight controller)

Current Sensor: Support (Scale=250 Offset=-500)

Mounting: 20 x 20mm ∅3.5mm hole size, compatible with M2 and M3
screws/Silicone grommets.

Dimension: 35 x 35 x 5.5mm

Weight: 7.2g

Includes

1x Speedybee Mini BLS V2 8Bit 35A 3-6S 20x20 4in1 ESC

Wiring Diagram


Speedybee Mini BLS V2 8Bit 35A 3-6S 20x20 4in1 ESC from WREKD Co.

The SpeedyBee Mini V2 35A BLHeli_S 4-in-1 ESC - 20x20 is a testament to advanced engineering and thoughtful design, offering pilots a robust and powerful electronic speed controller for their FPV drones.