FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

HDZero

HDZero ECO VTX Kit

The HDZero ECO FPV System is designed to bring digital FPV to more pilots by offering a low-cost, lightweight, and durable alternative to analog video.&nbsp

The HDZero ECO FPV System is designed to bring digital FPV to more pilots by offering a low-cost, lightweight, and durable alternative to analog video. 

HDZero ECO FPV System

HDZero ECO Bundle is designed to bring digital FPV to more pilots by offering a low cost, light weight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for. This budget-friendly Air Unit is a groundbreak

HDZero Eco Bundle

Five33

About this product





The HDZero ECO FPV System is designed to bring digital FPV to more pilots by offering a low-cost, lightweight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.  This budget-friendly Air Unit is a groundbreaking product - it’s the first VTX/camera combination that utilizes an HD composite video signal, eliminating the need for a delicate MIPI cable.  The ECO FPV System was meticulously designed for ultra-lightweight drones like whoops, where every fraction of a gram counts. The camera’s huge 98-degree vertical FOV is perfect for fast indoor proximity flying. The ECO VTX weighs approximately 4.5g, while the camera (including wires) weighs about 1.6g. With the included 0.2g dipole antenna, the entire ECO Bundle weighs about 6.3g.





Features


720p Progressive Scan Video with Low Latency
Durable and Delicate Cable-Free
Composite HD Video Interface
Stable Color Reproduction
Lightweight Design at 6.3g
Affordable Digital FPV











Specifications

HDZERO ECO CAMERA

Dimensions: 14mm wide x 16 tall x 13mm thick
FOV: 4:3 D:150° H:120° V:98°
Weight: 1.6g with cable
CMOS sensor: 1/3” 
Suggested Settings:

Sharpness: 15
Brightness: 45
Saturation: 8
R Surp: 8



HDZERO ECO VTX

HD Video Interface: Composite
RF Output: 25mW/200mW
Soft Mounting: 25 x 25 M2 
Weight: 4.5grams
Thickness: 4mm 
Input: 1S-3S






Includes


1x HDZero ECO Camera
1x HDZero ECO VTX
4x Grommets
1x Antenna
1x Cable







About this product The HDZero ECO FPV System is designed to bring digital FPV to more pilots by offering a low-cost, lightweight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.  This budget-friendl

Divimath, Inc.

HDZero ECO Bundle is designed to bring digital FPV to more pilots by offering a low cost, light weight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.
This budget-friendly Air Unit is a groundbreaking product—it’s the first VTX/camera combination that utilizes a HD composite video signal, eliminating the need for a delicate MIPI cable.
The ECO FPV System was meticulously designed for ultra-lightweight drones like Tiny Whoops, where every fraction of a gram counts. The camera’s huge 98deg vertical FOV is perfect for fast indoor proximity flying. The ECO VTX weighs approximately 4.5g, while the camera (including wires) comes in at about 1.6g. With the included 0.2g dipole antenna, the entire Eco Bundle weighs about mere 6.3g in total.
 
HDZero Eco VTX Specifications:
- Composite HD Video Interface
- 1S-3S Input
- 25mW/200mW RF Output
- 25 x 25 M2 Soft Mounting
- Antenna Retention
- 4.5grams/4mm Thickness
 
HDZero Eco Camera Specifications:
- 14mm wide x 16 tall x 13mm thick
- 1.6g weight with cable
- 1/3” CMOS sensor
- FOV: 4:3  D:150° H:120° V:98°
- Suggested Setting
   . Sharpness: 15
   . Saturation: 8
   . R Surp: 8
   . Brightness: 45
 
Important Notes:

It is recommended to use VBAT for power supply.
When using BEC for power supply, ensure that the BEC's output capability is at least 5V@2A.



HDZero ECO Bundle is designed to bring digital FPV to more pilots by offering a low cost, light weight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.  This budget-friendly Air Unit is a groundbreaking product—it’s the first VTX/camera combination that utilizes a HD composite video signal, eliminating the need for a delicate MIPI cable.  The ECO FPV System was meticulously designed for ultra-lightweight drones like Tiny Whoops, where every fraction of a gram counts. The camera’s huge 98deg vertical FOV is perfect for fast indoor proximity flying. The ECO VTX weighs approximately 4.5g, while the camera (including wires) comes in at about 1.6g. With the included 0.2g dipole antenna, the entire Eco Bundle weighs about mere 6.3g in total.   HDZero Eco VTX Specifications:- Composite HD Video Interface- 1S-3S Input- 25mW/200mW RF Output- 25 x 25 M2 Soft Mounting- Antenna Retention- 4.5grams/4mm Thickness  HDZero Eco Camera Specifications:- 14mm wide x 16 tall x 13mm thick- 1.6g weight with cable- 1/3” CMOS sensor- FOV: 4:3  D:150° H:120° V:98°- Suggested Setting   . Sharpness: 15   . Saturation: 8   . R Surp: 8   . Brightness: 45 Important Notes:&#009It is recommended to use VBAT for power supply.&#009When using BEC for power supply, ensure that the BEC's output capability is at least 5V@2A.

HDZero ECO Bundle is designed to bring digital FPV to more pilots by offering a low cost, light weight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.  This budget-friendly Air Unit is a groundbreaking product—it’s the first VTX/camera combination that utilizes a HD composite video signal, eliminating the need for a delicate MIPI cable.  The ECO FPV System was meticulously designed for ultra-lightweight drones like Tiny Whoops, where every fraction of a gram counts. The camera’s huge 98deg vertical FOV is perfect for fast indoor proximity flying. The ECO VTX weighs approximately 4.5g, while the camera (including wires) comes in at about 1.6g. With the included 0.2g dipole antenna, the entire Eco Bundle weighs about mere 6.3g in total.   HDZero Eco VTX Specifications:- Composite HD Video Interface- 1S-3S Input- 25mW/200mW RF Output- 25 x 25 M2 Soft Mounting- Antenna Retention- 4.5grams/4mm Thickness  HDZero Eco Camera Specifications:- 14mm wide x 16 tall x 13mm thick- 1.6g weight with cable- 1/3” CMOS sensor- FOV: 4:3  D:150° H:120° V:98°- Suggested Setting   . Sharpness: 15   . Saturation: 8   . R Surp: 8   . Brightness: 45 Important Notes:	It is recommended to use VBAT for power supply.	When using BEC for power supply, ensure that the BEC's output capability is at least 5V@2A.

HDZero Eco Bundle | HDZERO

VTX Frequency

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.

Video Transmitters

VTX Stack Mount

Max Transmission Power

Digital / Analog VTX

FPV Camera Included

Walksnail

Walksnail Avatar HD Moonlight VTX Kit - Micro Moonlight Camera, Dual Antenna

About this product The Moonlight is a brand new HD FPV system from Walksnail that won&#x27t break the bank. Boasting 4k/60fps, amazing low light detail, EIS and Gyroflow technology, and a host of other features to make this the HD system on all your frames! Walksnail Moonlight 4K - Cinematic FPV Features Starlight Camera f

About this product The Moonlight is a brand new HD FPV system from Walksnail that won't break the bank. Boasting 4k/60fps, amazing low light detail, EIS and Gyroflow technology, and a host of other features to make this the HD system on all your frames! Walksnail Moonlight 4K - Cinematic FPV Features Starlight Camera f

Walksnail Moonlight Kit - 4K FPV System

Boasting 4k/60fps, amazing low light detail, EIS and Gyroflow technology, and a host of other features - the Walksnail Moonlight aims to be the HD system on all your frames!

CADDX

Experience unparalleled performance with the Walksnail Avatar Moonlight 4K Starlight Kit. Featuring 4k 60fps with built-in EIS and support for Gyroflow, capture true 4k footage in ultra-low light conditions. Enjoy FPV and HD video quality, along with DVR recording capabilities for stunning visuals. Elevate your content with this industry-leading kit.
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

4k/60FPS 

Startlight Camera
Built-in EIS
Support Gyroflow
Sd card
4km range
22ms low latency
FOV 160°
Dual Antennas
7.4V-25.2V


 



Supports 4K/60fps, ensuring that FPV embraces true 4K. Shooting stable and HD videos without unnecessary latency, bringing pilots a smoother FPV experience.

Featuring the starlight sensor, to improve image quality and performance in low-light scene shooting, ensuring night vision shooting and eliminating frequent camera switching.

Built-in EIS and supports Gyroflow technology, giving you smooth and stable video quality, to facilitate and enjoy freestyle fly.

Comes with silicone pads for mounting the camera, ensuring stability and minimizing camera shake for perfect captures.

Supports manual shutter and manual ISO settings, take perfect photos regardless of any lighting limits.

The moonlight camera has a 160° FOV, providing you with a more natural and real picture for the ultimate flying experience.

It comes with ND8 filters to meet the needs of many different shooting scenes.

Specifications  


Model: Moonlight kit
Firmware Name: AvatarMoonlight_Sky_X.X.X
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP) FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm

1/O Interface JST1.0 x 4(Power in) JST0.8 x 6(USB)，Micro SD card Slot；IPEX-1
Sensor: Starlight sensor
FOV: Max 160°
Aperture: F2.1
Shutter: Rolling shutter
ISO: 100-25600
Recording resolution: 4K@30/60fps, 2.7K@30/60fps, 1080p@100/60fps, 720p@60fps
Max Mbps: 150Mbps
Video format: MP4 (H.264)
3D DNR: Support
Gyroflow: Support
Built-in EIS: Support
Wide Power Input: 7.4V-25.2V
Power consumption: 12V@1.4A, 8V@2.2A
Memory card type: U3 MicroSD, Max 256G
VTX size: 15.3mm x 34.5mm x 34.5mm
VTX Installation hole distance: 20 x 20mm/25 x 25mm (M2)
Weight: 38.5g (Antenna not included)
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2 (IPEX)

Avatar V2 Antenna 

Polarization: LHCP
Frequency range: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm (without cable)
Weight: 2g


Includes

1x Walksnail Moonlight Kit (VTX &amp Camera)
1x Hardware &amp Cable kit
1x ND Filter
2x Avatar v2 LHCP u.FL Antennas






Experience unparalleled performance with the Walksnail Avatar Moonlight 4K Starlight Kit. Featuring 4k 60fps with built-in EIS and support for Gyroflow, capture true 4k footage in ultra-low light conditions. Enjoy FPV and HD video quality, along with DVR recording capabilities for stunning visuals. Elevate your content with this industry-leading kit. Check out all our Walksnail HD products and check out all our Walksnail compatible products! Features 4k/60FPS Startlight Camera Built-in EIS Support Gyroflow Sd card 4km range 22ms low latency FOV 160° Dual Antennas 7.4V-25.2V Supports 4K/60fps, ensuring that FPV embraces true 4K. Shooting stable and HD videos without unnecessary latency, bringing pilots a smoother FPV experience. Featuring the starlight sensor, to improve image quality and performance in low-light scene shooting, ensuring night vision shooting and eliminating frequent camera switching. Built-in EIS and supports Gyroflow technology, giving you smooth and stable video quality, to facilitate and enjoy freestyle fly. Comes with silicone pads for mounting the camera, ensuring stability and minimizing camera shake for perfect captures. Supports manual shutter and manual ISO settings, take perfect photos regardless of any lighting limits. The moonlight camera has a 160° FOV, providing you with a more natural and real picture for the ultimate flying experience. It comes with ND8 filters to meet the needs of many different shooting scenes. Specifications Model: Moonlight kit Firmware Name: AvatarMoonlight_Sky_X.X.X Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP) FCC:&lt;30dBm; CE:&lt;14dBm; SRRC:&lt;20dBm; MIC:&lt;25dBm 1/O Interface JST1.0 x 4(Power in) JST0.8 x 6(USB)，Micro SD card Slot；IPEX-1 Sensor: Starlight sensor FOV: Max 160° Aperture: F2.1 Shutter: Rolling shutter ISO: 100-25600 Recording resolution: 4K@30/60fps, 2.7K@30/60fps, 1080p@100/60fps, 720p@60fps Max Mbps: 150Mbps Video format: MP4 (H.264) 3D DNR: Support Gyroflow: Support Built-in EIS: Support Wide Power Input: 7.4V-25.2V Power consumption: 12V@1.4A, 8V@2.2A Memory card type: U3 MicroSD, Max 256G VTX size: 15.3mm x 34.5mm x 34.5mm VTX Installation hole distance: 20 x 20mm/25 x 25mm (M2) Weight: 38.5g (Antenna not included) OSD: Canvas mode Latency: Average delay 22ms Antenna: 2 (IPEX) Avatar V2 Antenna Polarization: LHCP Frequency range: 5600MHz-6000MHz Gain: 1.9dBi VSWR: ≤1.5 Input Impedance: 50Ω Interface: IPEX-1 Size: R15 X 45mm (without cable) Weight: 2g Includes 1x Walksnail Moonlight Kit (VTX &amp; Camera) 1x Hardware &amp; Cable kit 2x Avatar v2 LHCP u.FL Antennas

Walksnail Avatar HD Moonlight Kit 20x20 / 25x25 VTX Kit w/ Micro Moonlight Camera - (Dual Antenna)

The New Walksnail Moonlight Kit Supports 4K/60fps, ensuring that FPV embraces true 4K. Shooting stable and HD videos without unnecessary latency to give the pilots a smoother FPV experience. It features a starlight sensor, built-in EIS and supports Gyroflow technology to improve image quality and performance in low-lig

Walksnail Moonlight Kit 4K/60FPS HD FPV System

The Walksnail Avatar Moonlight 4K air unit is here! Record 4k/60 video to an onboard SD card up to 256gb with bitrate up to 150mb/s. The new Moonlight camera has unparalleled low light performance, and the included ND filter is perfect for nailing exposure during daytime cinematic flights!
Features

4k/60FPS
Startlight Camera
Built-in EIS
Supports Gyroflow
Micro SD Storage up to 256GB
FOV 160°

Includes ND8 Filter
Dual Antennas
Input Voltage: 7.4-25.2V

Specifications
Model Moonlight Kit

Firmware name: AvatarMoonlight_Sky_X.X.X
Communication Frequency: 5.725-5.850GHz
Transmitter Power: (EIRP) FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm
I/O Interface: JST1.0*4(Power in)JST0.8*6(USB)，Micro SD card Slot；IPEX-1
Sensor: Starlight sensor
Latency Average delay: 22ms
FOV: Max 160°
Aperture: F2.1
Shutter: Rolling shutter
ISO: 100-25600
Recording resolution: 4K@30/60fps,2.7K@30/60fps,1080p@100/60fps,720p@60fps
Max Mbps: 150Mbps
Video format: MP4 (H.264)
3D DNR: Support
Gyroflow: Support
Built-in EIS: Support
OSD: Canvas mode
Wide Power Input: 7.4V-25.2V
Power consumption: 12V@1.4A, 8V@2.2A
Memory card type: U3 MicroSD, Max 256G
Camera size: 19.6mm*19mm*24mm
VTX size: 15.3mm*34.5mm*34.5mm
VTX Installation hole distance: 20*20mm/25*25mm (M2)
Antennas: 2 (IPEX)
Weight: 38.5g w/o Antennas

VTX Antenna

Model: Avatar V2 antenna
Polarization: LHCP
Frequency range: 5600MHz-6000MHz
Average Gain: 1.9dBi
VSWR: ＜1.5
Input Impedance: 50Ω
Interface: IPEX-1
Dimension: R15 X 45mm （without cable）
Weight: 2g





Bullet Points:

Supports 4K/60fps, ensuring that FPV embraces true 4K. Shooting stable and HD videos without unnecessary latency, bring pilots a smoother FPV experience.





Feature starlight sensor, to improve image quality and performance in low-light scene shooting, ensuring night vision shooting and eliminating frequent camera switching.




Built-in EIS and supports Gyroflow technology, taking you a smooth and stable video quality, to facilitate and enjoy freestyle fly.




Comes with silicone pads for mounting the camera, ensuring stability and minimizing camera shake for perfect captures.




Supports manual shutter and manual ISO settings, take perfect photos regardless of any lighting limits.




The moonlight camera has a 160° FOV, providing you with a more natural and real picture for the ultimate flying experience.




Come with ND8 filters to meet the needs of more different shooting scenes, to bring different effects to the shooting.



 Packing List：
 

The Walksnail Avatar Moonlight 4K air unit is here! Record 4k/60 video to an onboard SD card up to 256gb with bitrate up to 150mb/s. The new Moonlight camera has unparalleled low light performance, and the included ND filter is perfect for nailing exposure during daytime cinematic flights! Features 4k/60FPS Startlight 

Avatar Moonlight 4K Kit For Avatar HD Video System

The Walksnail Avatar Moonlight 4K air unit is here! Record 4k/60 video to an onboard SD card up to 256gb with bitrate up to 150mb/s. The new Moonlight camera has unparalleled low light performance, and the included ND filter is perfect for nailing exposure during daytime cinematic flights! Features 4k/60FPS Startlight Camera Built-in EIS Supports Gyroflow Micro SD Storage up to 256GB FOV 160° Includes ND8 Filter Dual Antennas Input Voltage: 7.4-25.2V Specifications Model Moonlight Kit Firmware name: AvatarMoonlight_Sky_X.X.X Communication Frequency: 5.725-5.850GHz Transmitter Power: (EIRP) FCC:&lt;30dBm; CE:&lt;14dBm; SRRC:&lt;20dBm; MIC:&lt;25dBm I/O Interface: JST1.0*4(Power in)JST0.8*6(USB)，Micro SD card Slot；IPEX-1 Sensor: Starlight sensor Latency Average delay: 22ms FOV: Max 160° Aperture: F2.1 Shutter: Rolling shutter ISO: 100-25600 Recording resolution: 4K@30/60fps,2.7K@30/60fps,1080p@100/60fps,720p@60fps Max Mbps: 150Mbps Video format: MP4 (H.264) 3D DNR: Support Gyroflow: Support Built-in EIS: Support OSD: Canvas mode Wide Power Input: 7.4V-25.2V Power consumption:

Experience unparalleled performance with the Walksnail Avatar Moonlight 4K Starlight Kit. Featuring 4k 60fps with built-in EIS and support for Gyroflow, capture true 4k footage in ultra-low light conditions. Enjoy FPV and HD video quality, along with DVR recording capabilities for stunning visuals. Elevate your content with this industry-leading kit.
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

4k/60FPS 

Startlight Camera
Built-in EIS
Support Gyroflow
Sd card
4km range
22ms low latency
FOV 160°
Dual Antennas
7.4V-25.2V


 



Supports 4K/60fps, ensuring that FPV embraces true 4K. Shooting stable and HD videos without unnecessary latency, bringing pilots a smoother FPV experience.

Featuring the starlight sensor, to improve image quality and performance in low-light scene shooting, ensuring night vision shooting and eliminating frequent camera switching.

Built-in EIS and supports Gyroflow technology, giving you smooth and stable video quality, to facilitate and enjoy freestyle fly.

Comes with silicone pads for mounting the camera, ensuring stability and minimizing camera shake for perfect captures.

Supports manual shutter and manual ISO settings, take perfect photos regardless of any lighting limits.

The moonlight camera has a 160° FOV, providing you with a more natural and real picture for the ultimate flying experience.

It comes with ND8 filters to meet the needs of many different shooting scenes.

Specifications  


Model: Moonlight kit
Firmware Name: AvatarMoonlight_Sky_X.X.X
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP) FCC:&amplt30dBm CE:&amplt14dBm SRRC:&amplt20dBm MIC:&amplt25dBm

1/O Interface JST1.0 x 4(Power in) JST0.8 x 6(USB)，Micro SD card Slot；IPEX-1
Sensor: Starlight sensor
FOV: Max 160°
Aperture: F2.1
Shutter: Rolling shutter
ISO: 100-25600
Recording resolution: 4K@30/60fps, 2.7K@30/60fps, 1080p@100/60fps, 720p@60fps
Max Mbps: 150Mbps
Video format: MP4 (H.264)
3D DNR: Support
Gyroflow: Support
Built-in EIS: Support
Wide Power Input: 7.4V-25.2V
Power consumption: 12V@1.4A, 8V@2.2A
Memory card type: U3 MicroSD, Max 256G
VTX size: 15.3mm x 34.5mm x 34.5mm
VTX Installation hole distance: 20 x 20mm/25 x 25mm (M2)
Weight: 38.5g (Antenna not included)
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2 (IPEX)

Avatar V2 Antenna 

Polarization: LHCP
Frequency range: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm (without cable)
Weight: 2g


Includes

1x Walksnail Moonlight Kit (VTX &ampamp Camera)
1x Hardware &ampamp Cable kit
1x ND Filter
2x Avatar v2 LHCP u.FL Antennas






Experience unparalleled performance with the Walksnail Avatar Moonlight 4K Starlight Kit. Featuring 4k 60fps with built-in EIS and support for Gyroflow, capture true 4k footage in ultra-low light conditions. Enjoy FPV and HD video quality, along with DVR recording capabilities for stunning visuals. Elevate your content

Walksnail Avatar HD Moonlight Kit 20x20 / 25x25 VTX Kit w/ Micro Moonlight Camera - (Dual Antenna) from WREKD Co.

VTX Antenna Connector

TBS Unify Pro 5G8 HV - Race SMA

Team BlackSheep

The smallest, lightest 40ch video transmitter on the market, down to a bare minimum for FPV racing, at a very attractive price!

TBS Unify Pro HV 5G8 - Race (SMA)

Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at a very attractive price! MAIN FEATURES Smallest, lightest video transmitter on the market 2-6S input power supported 25mW / 200mW power settings Ultra-clean transmission (up t

TBS Unify PRO 5G8 HV Race (SMA)

Walksnail Avatar HD V2 Pro VTX Kit - Micro Camera Pro, Dual Antenna Version

This Walksnail Avatar HD Pro Kit Dual Antenna Version achieves more stable and powerful signals, and is compatible with the upcoming Avatar 4K camera! The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable. Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that's just as clear as day. The Avatar HD system uses H.265 codec, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Other features include an updated PCB board, an updated outer shell, low latency of 22ms, and a 4Km range.


Features


Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Light weight design
FOV160°
Built-in 32G storage, 
Support Gyroflow
6V-25.2V
The only native 4:3 high-definition sensor in the FPV industry








Specifications

AVATAR HD V2 CAMERA

Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility 1080P/100fps compatibility 
Ratio: 4:3 native /16:9
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 7.2g
Dimensions: 19*19*22mm
Coaxial Cable: 140mm
Gyroflow: Only 32G VTX Supported


AVATAR V2 DUAL ANTENNA VTX

Communication Frequency: 5.725-5.850GHz
Transmitter Power: (EIRP) FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm
I/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
Mounting Holes: 25.5*25.5mm 20*20mm
Dimensions: 33.5*33.5*10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency Average delay: 22ms
Antenna: 2(IPEX)


AVATAR V2 ANTENNA

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm （without cable）
Weight: 2g







Includes


1x Walksnail Avatar HD VTX V2 Dual Antenna - 32GB w/ Gyro
1x Walksnail Avatar HD Camera V2
2x Walksnail Avatar Antenna V2
1x USB transfer extension cable
4x M2*5*0.5mm gasket
1x 4 Pin silicone cable
4x M2*14mm screws
8x M2*4mm screws
4x M2*5mm screws
4x M2*6mm screws

Wiring Diagram







This Walksnail Avatar HD Pro Kit Dual Antenna Version achieves more stable and powerful signals, and is compatible with the upcoming Avatar 4K camera! The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable. Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera

Avatar HD Pro Kit Dual Antenna with 32GB DVR & Gyro For Avatar HD Video System

This Walksnail Avatar HD Pro Kit Dual Antenna Version achieves more stable and powerful signals, and is compatible with the upcoming Avatar 4K camera! The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable. Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that's just as clear as day. The Avatar HD system uses H.265 codec, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Other features include an updated PCB board, an updated outer shell, low latency of 22ms, and a 4Km range. Features Dual antennas Compatible 4K 1080P 120fps compatibility 22ms low latency Ranging Mode 4KM range Light weight design FOV160° Built-in 32G storage, Support Gyroflow 6V-25.2V The only native 4:3 high-definition sensor in the FPV industry Specifications AVATAR HD V2

RaceDayQuads


This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency.  This kit includes the new VTX and camera, coming with 2 antennas. The micro camera comes with a 1/1.8 inch Sony Starvis Ⅱ sensor, come with extremely clear night vision. Supports 1080P/120fps high frame, the first high frame night vision HD camera in the FPV market. Walksnail Avatar camera has 160° wide-angle FOV, send you a more natural and real picture. This kit includes the new VTX and camera, coming with 2 antennas.
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

Dual Antennas
Compatible 4K
FOV160°
6V-25.2V
4km range
22ms low latency
Built-in 32G storage
High frame starlight
1080P 120fps compatibility
Sony Starvis Ⅱ Technology






The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Support 1080P/60FPS, 720P/120FPS.
Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that's just as clear as day.



The camera supports Gyroflow, take you smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.  
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.





Specifications
Camera

Model: Avatar HD Pro Camera
Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor
Resolution: 1080P/60fps720P/120fps,720P/60fps1080P/120fps compatibility
Ratio: 16/9 4/3
Lens: 8Mp
FOV: 160°
Aperture: F1.6
Shutter: Rolling shutter
Min.Illumination: 0.00001Lux
Weight: 9.5g
Dimensions: 19x19x24mm
Coaxial Cable: 140mm

VTX

Model: Avatar V2 Pro Module(Dual Antenna)
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System:Betaflight Inav Fettec ArduPilotKiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 Antenna 

Polarization: LHCP
Frequency range: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm(without cable)
Weight: 2g

Includes

1x Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x Mx14mm screws
4x M2x5x0.5mm gasket





This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX.

Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro - (Dual Antenna Version)

This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency.  This kit includes the new VTX and camera, coming with 2 antennas. The micro camera comes with a 1/1.8 inch Sony Starvis Ⅱ sensor, come with extremely clear night vision. Supports 1080P/120fps high frame, the first high frame night vision HD camera in the FPV market. Walksnail Avatar camera has 160° wide-angle FOV, send you a more natural and real picture. This kit includes the new VTX and camera, coming with 2 antennas.
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

Dual Antennas
Compatible 4K
FOV160°
6V-25.2V
4km range
22ms low latency
Built-in 32G storage
High frame starlight
1080P 120fps compatibility
Sony Starvis Ⅱ Technology






The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Support 1080P/60FPS, 720P/120FPS.
Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that's just as clear as day.



The camera supports Gyroflow, take you smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.  
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.




 
Specifications
Camera

Model: Avatar HD Pro Camera
Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor
Resolution: 1080P/60fps720P/120fps,720P/60fps1080P/120fps compatibility
Ratio: 16/9 4/3
Lens: 8Mp
FOV: 160°
Aperture: F1.6
Shutter: Rolling shutter
Min.Illumination: 0.00001Lux
Weight: 9.5g
Dimensions: 19x19x24mm
Coaxial Cable: 140mm

VTX

Model: Avatar V2 Pro Module(Dual Antenna)
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System:Betaflight Inav Fettec ArduPilotKiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 Antenna 

Polarization: LHCP
Frequency range: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm(without cable)
Weight: 2g

Includes

1x Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x Mx14mm screws
4x M2x5x0.5mm gasket





Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro 

The Walksnail Avatar HD Pro Kit utilizes cutting-edge H.265 coding, ensuring top-tier 1080p FPV visuals while maintaining minimal latency.&nbsp

The Walksnail Avatar HD Pro Kit utilizes cutting-edge H.265 coding, ensuring top-tier 1080p FPV visuals while maintaining minimal latency. 

Walksnail Avatar HD Pro Kit - 32GB w/ Dual Antennas


Walksnail Avatar HD Pro kit (Dual Antennas Version)



features：

Dual Antennas
Compatible 4K
FOV160°
6V-25.2V
4km range
22ms low latency
Built-in 32G storage
High frame starlight
1080P 120fps compatibility
Sony Starvis Ⅱ Technology



Bullet Points for Avatar HD Pro kit (Dual Antennas)

The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Support 1080P/60FPS, 720P/120FPS.
Featuring a 1/1.8 inch Sony Starvis  Ⅱ sensor, this camera delivers excellent night vision that's just as clear as day.




The camera supports Gyroflow, take you smooth and stable video quality.





The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.  
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes. 

 


New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.







The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.






It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.






Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.








Specification



Camera
 


Model
Avatar HD Pro Camera


Image Sensor

1/1.8-Inch Sony Starvis Ⅱ Sensor



Resolution
1080P/60fps720P/120fps,720P/60fps1080P/120fps compatibility


Ratio
16/9 4/3


Lens
8Mp


FOV
160°


Aperture
F1.6


Shutter
Rolling shutter


Min.Illumination
0.00001Lux


Weight
9.5g


Dimensions
19*19*24mm


Coaxial Cable
140mm


VTX



Model
Avatar V2 Pro Module(Dual Antenna)


Communication Frequency
5.725-5.850GHz


Transmitter Power (EIRP)

FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm



1/O Interface
JST1.0*4(Power in)JST0.8*6(USB)


Mounting Holes
25.5*25.5mm 20*20mm


Dimensions
33.5*33.5*10.5mm


Storage
32G


Recording
1080p/720p


Weight
15.4g


Operating Temperature
-20-40℃


Channels
8


Wide Power Input
6V-25.2V


Supported FC System
Betaflight Inav Fettec ArduPilotKiss


OSD
Canvas mode


Latency
Average delay 22ms


Antenna
2(IPEX)


Avatar V2 Antenna



Polarization
LHCP


Frequency range
5600MHz-6000MHz


Gain
1.9dBi


VSWR
≤1.5


Input Impedance
50Ω


Interface
IPEX-1


Size
R15 X 45mm(without cable)


Weight
2g


Packing List



USB cable
X1


4 Pin silicone cable
X1


M2*4mm screws
X8


M2*5mm screws
X4


M2*6mm screws
X4


M2*14mm screws
X4


M2*5*0.5mm gasket
X4






Walksnail Avatar HD Pro kit (Dual Antennas Version) features： Dual Antennas Compatible 4K FOV160° 6V-25.2V 4km range 22ms low latency Built-in 32G storage High frame starlight 1080P 120fps compatibility Sony Starvis Ⅱ Technology Bullet Points for Avatar HD Pro kit (Dual Antennas) The Avatar HD system uses H.265 code, a

Walksnail Avatar HD Pro Kit (Dual Antennas Version)

This Walksnail Avatar Digital HD Pro Kit is designed for use with Walksnail Avatar/Fatshark Dominator HD FPV systems. It features H.265 encoding to provide 1080p FPV image quality with ultra-low latency and 1/1.8 inch Sony Starvis Ⅱ sensor, come with extremely clear night vision as long as day vision. The kit also supp

Walksnail Avatar HD Pro Kit Dual Antennas Version 32G with Pro Camera+Gyroflow for Walksnail Avatar/Fatshark Dominator HD FPV System

This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency.  This kit includes the new VTX and camera, coming with 2 antennas. The micro camera comes with a 1/1.8 inch Sony Starvis Ⅱ sensor, come with extremely clear night vision. Supports 1080P/120fps high frame, the first high frame night vision HD camera in the FPV market. Walksnail Avatar camera has 160° wide-angle FOV, send you a more natural and real picture. This kit includes the new VTX and camera, coming with 2 antennas.
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

Dual Antennas
Compatible 4K
FOV160°
6V-25.2V
4km range
22ms low latency
Built-in 32G storage
High frame starlight
1080P 120fps compatibility
Sony Starvis Ⅱ Technology






The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Support 1080P/60FPS, 720P/120FPS.
Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that&#39s just as clear as day.



The camera supports Gyroflow, take you smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.  
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.




 
Specifications
Camera

Model: Avatar HD Pro Camera
Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor
Resolution: 1080P/60fps720P/120fps,720P/60fps1080P/120fps compatibility
Ratio: 16/9 4/3
Lens: 8Mp
FOV: 160°
Aperture: F1.6
Shutter: Rolling shutter
Min.Illumination: 0.00001Lux
Weight: 9.5g
Dimensions: 19x19x24mm
Coaxial Cable: 140mm

VTX

Model: Avatar V2 Pro Module(Dual Antenna)
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:&amplt30dBm CE:&amplt14dBm SRRC:&amplt20dBm MIC:&amplt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System:Betaflight Inav Fettec ArduPilotKiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 Antenna 

Polarization: LHCP
Frequency range: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm(without cable)
Weight: 2g

Includes

1x Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x Mx14mm screws
4x M2x5x0.5mm gasket





Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro - (Dual Antenna Version) from WREKD Co.

WALKSNAIL

WALKSNAIL Avatar HD Pro Kit (Dual Antenna)

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

WALKSNAIL Avatar HD Pro Kit (Dual Antenna) - RMRC

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

Walksnail Avatar HD Kit V2 VTX Kit - Micro Camera V2, Dual Antenna Version

Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. Camera V2 delivers 2K pixels, a 4:3 native sensor for enhanced visuals, and a native 4:3 mode ratio so you can capture more of your surroundings in stunning detail. This kit includes the new VTX and camera, coming with 2 antennas.

Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Lightweight design
FOV160°
Built-in 32G storage, 
Support Gyroflow
6V-25.2V
The only native 4:3 high-definition sensor in the FPV industry







The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. Meanwhile, it's a better fit for regular FPV races as well.

 

The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.   
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes.




New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate. 



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.


Specification
Camera

Model: Avatar V2 camera

Image Sensor: 1/3.2-Inch 4Mp 4:3sensor

Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility
1080P/100fps compatibility 

Ratio: 4:3 native /16:9

Lens: 2.1mm

FOV: 160°

Aperture: F2.0

Shutter: Rolling shutter

Min.Illumination: 0.001Lux

Weight: 7.2g

Dimensions: 19x19x22mm

Coaxial Cable: 140mm

Gyroflow: Only 32G VTX Supported

VTX



Model: Avatar V2 module(Dual Antenna)
Communication Frequency: 725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 antenna 

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm （without cable）
Weight: 2g

Includes

1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x M2x14mm screws
4x M2x5x0.5mm gasket






Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna

Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)

Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - 

Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. Camera V2 delivers 2K pixels, a 4:3 native sensor for enhanced visuals, and a native 4:3 mode ratio so you can capture more of your surroundings in stunning detail. This kit includes the new VTX and camera, coming with 2 antennas.

Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Lightweight design
FOV160°
Built-in 32G storage, 
Support Gyroflow
6V-25.2V
The only native 4:3 high-definition sensor in the FPV industry







The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. Meanwhile, it&#39s a better fit for regular FPV races as well.

 

The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.   
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes.




New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate. 



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.


Specification
Camera

Model: Avatar V2 camera

Image Sensor: 1/3.2-Inch 4Mp 4:3sensor

Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility
1080P/100fps compatibility 

Ratio: 4:3 native /16:9

Lens: 2.1mm

FOV: 160°

Aperture: F2.0

Shutter: Rolling shutter

Min.Illumination: 0.001Lux

Weight: 7.2g

Dimensions: 19x19x22mm

Coaxial Cable: 140mm

Gyroflow: Only 32G VTX Supported

VTX



Model: Avatar V2 module(Dual Antenna)
Communication Frequency: 725-5.850GHz
Transmitter Power (EIRP): FCC:&amplt30dBmCE:&amplt14dBmSRRC:&amplt20dBm MIC:&amplt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 antenna 

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm （without cable）
Weight: 2g

Includes

1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x M2x14mm screws
4x M2x5x0.5mm gasket






Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version) from WREKD Co.

Experience FPV like never before with the Walksnail Avatar HD Kit V2 with dual antennas.

Walksnail Avatar HD Kit V2 - 32GB + Gyro w/ Dual Antennas


Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. Camera V2 delivers 2K pixels, a 4:3 native sensor for enhanced visuals, and a native 4:3 mode ratio so you can capture more of your surroundings in stunning detail. This kit includes the new VTX and camera, coming with 2 antennas.

Features

Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Lightweight design
FOV160°
Built-in 32G storage, 
Support Gyroflow
6V-25.2V
The only native 4:3 high-definition sensor in the FPV industry







The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. Meanwhile, it's a better fit for regular FPV races as well.

 

The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.   
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes.




New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate. 



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.


Specification
Camera

Model: Avatar V2 camera

Image Sensor: 1/3.2-Inch 4Mp 4:3sensor

Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility
1080P/100fps compatibility 

Ratio: 4:3 native /16:9

Lens: 2.1mm

FOV: 160°

Aperture: F2.0

Shutter: Rolling shutter

Min.Illumination: 0.001Lux

Weight: 7.2g

Dimensions: 19x19x22mm

Coaxial Cable: 140mm

Gyroflow: Only 32G VTX Supported

VTX



Model: Avatar V2 module(Dual Antenna)
Communication Frequency: 725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 antenna 

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm （without cable）
Weight: 2g

Includes

1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x M2x14mm screws
4x M2x5x0.5mm gasket






This Walksnail Avatar HD Kit V2 Dual Antenna Version achieves more stable and powerful signals, and is compatible with the upcoming Avatar 4K camera! The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable. The 2K/120fps/4:3 native sensor camera allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Other features include an updated PCB board, an updated outer shell, low latency of 22ms, and a 4Km range.


Features


Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Light weight design
FOV160°
Built-in 32G storage, 
Support Gyroflow
6V-25.2V
The only native 4:3 high-definition sensor in the FPV industry








Specifications

AVATAR HD V2 CAMERA

Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility 1080P/100fps compatibility 
Ratio: 4:3 native /16:9
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 7.2g
Dimensions: 19*19*22mm
Coaxial Cable: 140mm
Gyroflow: Only 32G VTX Supported


AVATAR V2 DUAL ANTENNA VTX

Communication Frequency: 5.725-5.850GHz
Transmitter Power: (EIRP) FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm
I/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
Mounting Holes: 25.5*25.5mm 20*20mm
Dimensions: 33.5*33.5*10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency Average delay: 22ms
Antenna: 2(IPEX)


AVATAR V2 ANTENNA

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm （without cable）
Weight: 2g







Includes


1x Walksnail Avatar HD VTX V2 Dual Antenna - 32GB w/ Gyro
1x Walksnail Avatar HD Camera V2
2x Walksnail Avatar Antenna V2
1x USB transfer extension cable
4x M2*5*0.5mm gasket
1x 4 Pin silicone cable
4x M2*14mm screws
8x M2*4mm screws
4x M2*5mm screws
4x M2*6mm screws

Wiring Diagram







This Walksnail Avatar HD Kit V2 Dual Antenna Version achieves more stable and powerful signals, and is compatible with the upcoming Avatar 4K camera! The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable. The 2K/120fps/4:3 native sensor camera allows you to captu

Avatar HD Kit V2 Dual Antenna with 32GB DVR & Gyro For Avatar HD Video System

This Walksnail Avatar HD Kit V2 Dual Antenna Version achieves more stable and powerful signals, and is compatible with the upcoming Avatar 4K camera! The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable. The 2K/120fps/4:3 native sensor camera allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Other features include an updated PCB board, an updated outer shell, low latency of 22ms, and a 4Km range. Features Dual antennas Compatible 4K 1080P 120fps compatibility 22ms low latency Ranging Mode 4KM range Light weight design FOV160° Built-in 32G storage, Support Gyroflow 6V-25.2V The only native 4:3 high-definition sensor in the

Walksnail Avatar HD Kit V2 (Dual Antennas Version)

Walksnail Avatar HD Kit V2 (Dual Antennas Version) - RMRC

This Walksnail Digital HD VTX / Micro Camera Kit V2 is designed for use with Walksnail Avatar/Fatshark Dominator HD FPV systems. It features H.265 encoding to provide 1080p FPV image quality with ultra-low latency and 2K pixels, 4:3 native sensor for improved image quality. The kit also supports Gyroflow for smoother, 

Walksnail Avatar HD Kit V2 Dual Antennas Version 32G with Camera V2+Gyroflow for Walksnail Avatar/Fatshark Dominator HD FPV System

Walksnail Avatar HD Kit V2 (Dual Antennas Version)

Features


Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Light weight design
FOV160°
Built-in 32G storage, 
Support Gyroflow
6V-25.2V
The only native 4:3 high-definition sensor in the FPV industry



Bullet Points for Walksnail Avatar HD Kit V2 (Dual Antennas)

The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images.Meanwhile, it's better fit for regular FPV race as well.




The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.





The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.   
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes.

    


New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability . Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.







The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.






Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate. 






Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.




 


Q: Do we support 1080P 120FPS?

A: Our VTX products all support 1080P/120FPS, and can reach 1080P/120FPS through firmware upgrade is around the corner.


 



Specification
 


Camera



Model
Avatar V2 camera


Image Sensor
1/3.2-Inch 4Mp 4:3sensor


Resolution
1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility 1080P/100fps compatibility 


Ratio
4:3 native /16:9


Lens
2.1mm


FOV
160°


Aperture
F2.0


Shutter
Rolling shutter


Min.Illumination
0.001Lux


Weight
7.2g


Dimensions
19*19*22mm


Coaxial Cable
140mm


Gyroflow
Only 32G VTX Supported


VTX



Model
Avatar V2 module(Dual Antenna)


Communication Frequency
5.725-5.850GHz


Transmitter Power (EIRP)

FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm



1/O Interface
JST1.0*4(Power in)JST0.8*6(USB)


Mounting Holes
25.5*25.5mm 20*20mm


Dimensions
33.5*33.5*10.5mm


Storage
32G


Recording
1080p/720p


Weight
15.4g


Operating Temperature
-20-40℃


Channels
8


Wide Power Input
6V-25.2V


Supported FC System
Betaflight Inav Fettec ArduPilot Kiss


OSD
Canvas mode


Latency
Average delay 22ms


Antenna
2(IPEX)


Avatar V2 antenna



Polarization
LHCP


Bandwidth
5600MHz-6000MHz


Gain
1.9dBi


VSWR
≤1.5


Input Impedance
50Ω


Interface
IPEX-1


Size
R15 X 45mm （without cable）


Weight
2g


Packing List



USB cable
X1 


4 Pin silicone cable
X1 


M2*4mm screws
X8 


M2*5mm screws
X4 


M2*6mm screws
X4


M2*14mm screws
X4


M2*5*0.5mm gasket
X4 





Walksnail Avatar HD Kit V2 (Dual Antennas Version) Features Dual antennas Compatible 4K 1080P 120fps compatibility 22ms low latency Ranging Mode 4KM range Light weight design FOV160° Built-in 32G storage,  Support Gyroflow 6V-25.2V The only native 4:3 high-definition sensor in the FPV industry Bullet Points for Walksna

Lightweight design, ultra-thin experience 
The Walksnail Avatar VRX Kit Combo is only 83g and comes with 114x55x22mm a size easy to carry.


Walksnail VRX adopts a 4-antenna design. 2 directional antennas and the maximum transmission distance is 4km

1080P/60FPSWalksnail VRX adopts industry-leading H.265 encoding technology,which can provide a minimum delay of 22ms and a maximum resolution of 1080p.The HD picture quality takes you to experience the fun of flying a drone.

HDMI output ensures you enjoy uncompressed audio and video signals from the Walksnail HD system

Canvas ModeSupports Betaflight, INAV, and KISS with full OSD. You can easily adjust the parameters you want by remote control.

Specification 

Camera: 

Model Avatar nano/Avatar camera
Image Sensor: 1/2.7”1nch
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 16/9 4/3
Lens: 2.1mm
FOV: 170°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 3.5g/6g
Dimensions: 14x14x17mm/19x19x22mm
Coaxial Cable: 90mm/140mm

VTX:

Model: Avatar V2 module(Dual Antenna)
Communication Frequency: 725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar HD VRX

Model Avatar HD VRX
CommunicationFrequency: 5.725-5.850GHz
TransmitterPower: (EIRP) FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBmMIC:&lt25dBm
I/O Interface: HDMI, micro SD card slot, DC5.5x2.1mm
HDMI output: 1080p/60fps, 720p/100fps, 720p/60fps
Power Input: 7-21V(2S-5S)
SD Card Support:256G
System: Avatar HD system


Includes:

 Avatar VRX: (or buy alone)

RedBirdAntenna x2
HDMI cable x1
2-in-1 DCPowerCable x1

Avatar Micro V2 HD Kit (Dual Antenna Version): (or buy alone) 

1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x M2x14mm screws
4x M2x5x0.5mm gasket


Lightweight design, ultra-thin experience  The Walksnail Avatar VRX Kit Combo is only 83g and comes with 114x55x22mm; a size easy to carry. Walksnail VRX adopts a 4-antenna design. 2 directional antennas and the maximum transmission distance is 4km 1080P/60FPSWalksnail VRX adopts industry-leading H.265 encoding technol

Walksnail Avatar HD V2 VTX Micro Kit Combo - (Dual Antenna Version)

Walksnail Avatar HD V2 VTX Module - Dual Antenna Version

The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. 
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

The module includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, it's better to protect the VTX.
The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.
The module includes a spare power pad, providing an extra opportunity for welding.


A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.





Specifications

Model: Avatar V2 module(Dual Antenna)

Communication Frequency: 725-5.850GHz

Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 32G

Recording: 1080p/720p

Weight: 15.4g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency: Average delay 22ms

Antenna: 2(IPEX)

Includes

1x Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)


The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide

Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)

Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Versio


The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. 
Features

The module includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, it's better to protect the VTX.
The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.
The module includes a spare power pad, providing an extra opportunity for welding.


A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.





Specifications

Model: Avatar V2 module(Dual Antenna)

Communication Frequency: 725-5.850GHz

Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 32G

Recording: 1080p/720p

Weight: 15.4g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency: Average delay 22ms

Antenna: 2(IPEX)

Includes

1x Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)


Replacement VTX Module for Avatar HD V2 Dual Antenna VTX kit.
Specifications

Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm
I/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
Mounting Holes: 25.5*25.5mm 20*20mm
Dimensions: 33*33*10.5mm
Storage: 32G
Recording: 1080P/720P
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilotKiss
OSD: Canvas mode
Latency Average delay: 22ms
Antenna: 2(IPEX)


Includes

1x Avatar HD VTX Module V2 Dual Antenna - 32GB Without Camera For Avatar HD Video System

 
 

Replacement VTX Module for Avatar HD V2 Dual Antenna VTX kit. Specifications Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP): FCC:&lt;30dBm; CE:&lt;14dBm; SRRC:&lt;20dBm; MIC:&lt;25dBm I/O Interface: JST1.0*4(Power in)JST0.8*6(USB) Mounting Holes: 25.5*25.5mm; 20*20mm Dimensions: 33*33*10.5mm Storage: 

Avatar HD VTX Module V2 Dual Antenna - 32GB Without Camera For Avatar HD Video System

Replacement VTX Module for Avatar HD V2 Dual Antenna VTX kit.
Specifications

Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:&lt;30dBm; CE:&lt;14dBm; SRRC:&lt;20dBm; MIC:&lt;25dBm
I/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
Mounting Holes: 25.5*25.5mm; 20*20mm
Dimensions: 33*33*10.5mm
Storage: 32G
Recording: 1080P/720P
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss;
OSD: Canvas mode
Latency Average delay: 22ms
Antenna: 2(IPEX)


Includes

1x Avatar HD VTX Module V2 Dual Antenna - 32GB Without Camera For Avatar HD Video System

 
 

The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. 
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

The module includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, it&#39s better to protect the VTX.
The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.
The module includes a spare power pad, providing an extra opportunity for welding.


A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.





Specifications

Model: Avatar V2 module(Dual Antenna)

Communication Frequency: 725-5.850GHz

Transmitter Power (EIRP): FCC:&amplt30dBmCE:&amplt14dBmSRRC:&amplt20dBm MIC:&amplt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 32G

Recording: 1080p/720p

Weight: 15.4g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency: Average delay 22ms

Antenna: 2(IPEX)

Includes

1x Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)


Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version) from WREKD Co.

The Walksnail Avatar HD VTX V2 is a versatile VTX module compatible with dual antennas. 

Walksnail Avatar HD VTX V2 Module - 32GB Dual Antennas Version


Bullet Points：




The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, it's better to protect the VTX.
The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.
The kit includes a spare power pad, providing an extra opportunity for welding.









The Avatar VTX comes with 32g built-in storage it can record 1080P or 720P HD fly videos without interference. 32G built-in storage, recording video time increased by 4 times.









New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.









Specification



VTX
 


Model
Avatar V2 module(Dual Antenna)


Communication Frequency
5.725-5.850GHz


Transmitter Power (EIRP)
FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm


1/O Interface
JST1.0*4(Power in)JST0.8*6(USB)


Mounting Holes
25.5*25.5mm 20*20mm


Dimensions
33*33*10.5mm


Storage
32G


Recording
1080P/720P


Weight
15.4g



Operating Temperature
-20-40℃


Channels
8


Wide Power Input
6V-25.2V


Supported FC System
Betaflight Inav Fettec ArduPilotKiss


OSD
Canvas mode


Latency
Average delay 22ms


Antenna
2(IPEX)








Bullet Points： The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models. Updated the design of PCB board and shell, improved the quality of VTX, more durable. Optimized the installation place of the antenna, it's better to protect the VTX. The position

Walksnail Avatar HD VTX V2 Module (Dual Antennas Version)

The Walksnail Avatar HD VTX Module V2 provides superior performance with a range of features, including 25*25mm and 20*20mm mounting holes, optimized antenna installation, frequency binding button, spare power pad and 32GB built-in storage for 1080P or 720P HD fly videos. Increased TVS protection and support for up to 

Walksnail Avatar HD VTX V2 Module Dual Antennas Version 32G (VTX ONLY) for Walksnail Avatar/Fatshark Dominator HD FPV System

RunCam

RunCam Link Digital FPV Air Unit Lite and Night Eagle HD Camera Kit

The RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version delivers high-definition images for an enhanced viewing experience. It offers reliable performance that FPV pilots can depend on. Check out all our Digital VTX/Camera Collection and the rest of our RunCam Products! Specifications: RunCam LINK VTX: Frequ

RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version

RunCam Link Digital FPV Air Unit Night Eagle HD Camera VersionExperience unparalleled FPV performance with the RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version. Designed for drone enthusiasts and racers, this cutting-edge system offers exceptional features and advanced technology to elevate your flying experience.Key Features:8 Channels, 8 Drones:The HDL FPV Transmission system and the FPV Air Unit feature eight frequency channels, allowing up to eight drones to fly simultaneously.Exclusive channels for each operator reduce cross-interference, providing an optimal racing experience.Embedded Remote Controller Receiver:Wireless connectivity to the DJI FPV Remote Controller without additional receivers.Significantly reduces flight preparation time for seamless operation.Small Size, Powerful Performance:Back-illuminated Pixel technology ultra-high sensitivity sensor for exceptional image quality.Starlight black and white image night vision eff...

RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version  - RMRC

RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version 

GEPRC

GEPRC RAD 2.5W 5.8GHz Analog Video Transmitter

GEPRC RAD VTX 5.8G 2.5W is an analog video transmitter designed primarily for freestyle and long-range drones. The video transmitter has 30.5x30.5mm mounting holes and can be mounted in a stack. It is equipped with a heat sink on both sides for good heat dissipation. The GEPRC RAD VTX can be controlled via push button 

GEPRC RAD VTX 2.5W 5.8GHz Analog Video transmitter

Walksnail Avatar HD Mini V3 VTX Module

Replacement VTX Module for Avatar HD Nano Kit V3.
The Walksnail Avatar HD Mini VTX Module V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range.
The Avatar VTX comes with 32g built-in storage, it can record 1080p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.
Specifications

Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP) FCC:&lt27dBmCE:&lt14dBmSRRC:&lt20dBm
MIC:&lt25dBm
I/O Interface: JST1.0*4(Power in), JST0.8*4(USB)
Mounting Holes: 25.5*25.5mm(M2 hole)20*20mm(M3 hole)
Dimensions: 31.5*31.5*9.4mm
Storage: 32GB
Recording: 1080p/720p
Weight: 13.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 3.1V-13V
Supported FC System: Betaflight Inav Fettec Kiss ArduPliot
OSD: Canvas mode
Latency Average latency: 22ms
Antenna Connector: 1(IPEX)

Includes

1x Avatar HD Mini VTX Module V3


Replacement VTX Module for Avatar HD Nano Kit V3. The Walksnail Avatar HD Mini VTX Module V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range. The Avatar VTX comes with 32g built-in storage, it can record 1

Avatar HD Mini VTX Module V3 - 32GB Without Camera For Avatar HD Video System

Replacement VTX Module for Avatar HD Nano Kit V3. The Walksnail Avatar HD Mini VTX Module V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range. The Avatar VTX comes with 32g built-in storage, it can record 1080p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos. Specifications Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP) FCC:&lt;27dBm;CE:&lt;14dBm;SRRC:&lt;20dBm; MIC:&lt;25dBm I/O Interface: JST1.0*4(Power in), JST0.8*4(USB) Mounting Holes: 25.5*25.5mm(M2 hole);20*20mm(M3 hole) Dimensions: 31.5*31.5*9.4mm Storage: 32GB Recording: 1080p/720p Weight: 13.4g Operating Temperature: -20-40℃ Channels: 8 Wide Power Input: 3.1V-13V Supported FC System: Betaflight; Inav; Fettec; Kiss;

The Walksnail Avatar HD Mini VTX V3 features 32GB of built-in storage.&nbsp

The Walksnail Avatar HD Mini VTX V3 features 32GB of built-in storage. 

Walksnail Avatar HD Mini VTX V3

Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range. Check out all our Digital FPV VTX's and the rest of our Walksnail Products!! Features: The Avatar vtx comes with 32g built-i

Walksnail Avatar HD Mini VTX V3 (VTX ONLY) for Walksnail Avatar/Fatshark Dominator HD FPV System


Bullet Point for Walksnail Avatar HD Mini VTX V3



Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range.





The Avatar vtx comes with 32g built-in storage, it can record 1080p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.




Note：USB Cable needs to be purchased separately




Specification

 






VTX



Model
Avatar HD Mini VTX V3


Communication Frequency
5.725-5.850GHz


Transmitter Power (EIRP)
FCC:&lt27dBmCE:&lt14dBmSRRC:&lt20dBmMIC:&lt25dBm


I/O Interface
JST1.0*4(Power in)JST0.8*4(USB)


Mounting Holes
25.5*25.5mm(M2 hole)20*20mm(M3 hole)


Dimensions
31.5*31.5*9.4mm


Storage
32G


Recording
1080p/720p


Weight
13.4g



Operating Temperature
-20-40℃


Channels
8


Wide Power Input
3.1V-13V


Supported FC System
Betaflight Inav Fettec Kiss ArduPliot


OSD
Canvas mode


Latency
Average latency 22ms


Antenna
1(IPEX)













Bullet Point for Walksnail Avatar HD Mini VTX V3 Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range. The Avatar vtx comes with 32g built-in storage, it can record 1080p HD and 

Walksnail Avatar HD Mini VTX V3 Module

Walksnail Avatar HD Nano V3 VTX Kit

The Walksnail Avatar HD Nano Camera V3 /  Avatar HD Mini VTX V3 features a nano digital camera, antenna, and mini VTX that works with HD goggles such as the Walksnail Avatar and Fat Shark HD Dominator. The Avatar V3 is the upgraded version of the Avatar 1S, where the V3 improves with 32G of storage, 500mW of power, a native 4:3 sensor, and a wide voltage range of 3.1-13V. 
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

3.1~13V
500mW
FOV160°
Metal case
1080P/60fps
4:3 native sensor
Built-in 32G storage
18.5g light-weight
Nano Camera 14x14mm



Walksnail Avatar HD Nano Kit V3

The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flying footage with exceptional clarity and detail.



Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you&#39ll be able to fly various kinds of drones with amazing video quality and range.



Nano camera V3 with dimensions of 14*14cm and a weight of only 3g, equipped with a 2.1mm lens and 160° FOV, provides clearer and more realistic image quality.



The Avatar VTX comes with 32g built-in storage, it can record 1080p HD and interference-free flight footage without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.



Canvas Mode: supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you&#39ll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.






Q: Can I use analog channels?/Can I fly with other analog pilots?
A: Yes, when you upgrade the firmware to 34.40.15 version, need switch to racing mode.

Specifications
Camera

Model: Avatar HD Nano Camera V3
Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 4:3 native / 16:9
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling Shutter
Min.Illumination: 0.001Lux
Weight: 3g （without cable）
Dimensions: 14x14x16.8mm
Coaxial Cable: 90mm(default)/140mm

VTX

Model Avatar HD Mini VTX V3
Communication Frequency 5.725-5.850GHz
Transmitter Power (EIRP) FCC:&amplt27dBmCE:&amplt14dBmSRRC:&amplt20dBm
MIC:&amplt25dBm
I/O Interface JST1.0x4(Power in)JST0.8x4(USB)
Mounting Holes 25.5x25.5mm(M2 hole)20x20mm(M3 hole)
Dimensions 31.5x31.5x9.4mm
Storage 32G
Recording 1080p/720p
Weight 13.4g
Operating Temperature -20-40℃
Channels 8
Wide Power Input 3.1V-13V
Supported FC System Betaflight Inav Fettec Kiss ArduPliot
OSD Canvas mode
Latency Average latency 22ms
Antenna 1(IPEX)

VTX Antenna

Model: Avatar V2 antenna
Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Average Gain: 1.9dBi
VSWR: ≤1.5
Interface: IPEX-1
Line Length: 105mm
Dimension: R15x45mm(without cable)
Weight: 2g

Includes

1x Walksnail Avatar HD Nano V3 VTX Kit w/ Nano Camera
1x 4 Pin USB Cable

1x 4 Pin Power Cable

2x M2x4/5/6mm Screws

4x M2x14mm Screws  

4x M2x5x0.5mm washer

5x 2.1x3.4x1mm Gasket

1x 14 to19mm bracket




The Walksnail Avatar HD Nano Camera V3 /  Avatar HD Mini VTX V3 features a nano digital camera, antenna, and mini VTX that works with HD goggles such as the Walksnail Avatar and Fat Shark HD Dominator. The Avatar V3 is the upgraded version of the Avatar 1S, where the V3 improves with 32G of storage, 500mW of power, a n

Walksnail Avatar HD Nano V3 20x20 VTX Kit w/ Nano Camera (Compatible w/ Fat Shark Dominator HD) from WREKD Co.

Walksnail Avatar HD Nano V3 20x20 VTX Kit w/ Nano Camera (Compatible w/ Fat Shark Dominator HD)

WALKSNAIL Avatar HD Nano Kit V3 Camera, Transmitter, Antenna

WALKSNAIL Avatar HD Nano Kit V3 Camera, Transmitter, Antenna - RMRC

 The Avatar HD Nano Kit V3 features a 4:3 native sensor, wide voltage input, and higher transmit power. 
Features

3.1~13V
500mW
FOV160°
Metal case
1080P/60fps
4:3 native sensor
Built-in 32G storage
18.5g light-weight
Nano Camera 14*14mm

Specifications
Camera 

Model: Avatar HD Nano Camera V3
Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 4:3 native / 16:9 
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling Shutter
Min.Illumination: 0.001Lux
Weight: 3g （without cable）
Dimensions: 14*14*16.8mm
Coaxial Cable: 90mm(default)/140mm

VTX 

Model: Avatar HD Mini VTX V3
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP) FCC:&lt27dBmCE:&lt14dBmSRRC:&lt20dBm
MIC:&lt25dBm
I/O Interface: JST1.0*4(Power in)JST0.8*4(USB)
Mounting Holes: 25.5*25.5mm(M2 hole)20*20mm(M3 hole)
Dimensions: 31.5*31.5*9.4mm
Storage: 32G
Recording: 1080p/720p
Weight: 13.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 3.1V-13V
Supported FC System: Betaflight Inav Fettec Kiss ArduPliot
OSD: Canvas mode
Latency Average latency: 22ms
Antenna: 1(IPEX)

VTX Antenna 

Model: Avatar V2 antenna
Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Average Gain: 1.9dBi
VSWR: ≤1.5
Interface: IPEX-1
Line Length: 105mm
Dimension: R15*45mm(without cable)
Weight: 2g

Includes

1x Avatar HD Nano Kit V3 
1x 4 Pin USB Cable 
1x 4 Pin Power Cable 
2x M2x4/5/6mm Screws 
4x M2x14mm Screws 
4x M2*5*0.5mm washer
5x 2.1x3.4x1mm Gasket
1x 14 to19mm bracket


Bullet Point for Walksnail Avatar HD Nano Kit V3

The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flying footage with exceptional clarity and detail.




Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range.





Nano camera V3 with dimensions of 14*14cm and a weight of only 3g, equipped with a 2.1mm lens and 160° FOV, provides clearer and more realistic image quality.





The Avatar vtx comes with 32g built-in storage, it can record 1080p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.






Canvas Mode：supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.






Q: Can I use analog channels?/Can I fly with other analog pilots?
A: Yes, when you upgrade the firmware to 34.40.15 version, need switch to racing mode.




The Avatar HD Nano Kit V3 features a 4:3 native sensor, wide voltage input, and higher transmit power. Features 3.1~13V 500mW FOV160° Metal case 1080P/60fps 4:3 native sensor Built-in 32G storage 18.5g light-weight Nano Camera 14*14mm Specifications Camera Model: Avatar HD Nano Camera V3 Image Sensor: 1/3.2-Inch 4Mp 4:

Avatar HD Nano Kit V3 with 32GB DVR For Avatar HD Video System

The Avatar HD Nano Kit V3 features a 4:3 native sensor, wide voltage input, and higher transmit power. Features 3.1~13V 500mW FOV160° Metal case 1080P/60fps 4:3 native sensor Built-in 32G storage 18.5g light-weight Nano Camera 14*14mm Specifications Camera Model: Avatar HD Nano Camera V3 Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor Resolution: 1080P/60fps,720P/120fps,720P/60fps Ratio: 4:3 native / 16:9 Lens: 2.1mm FOV: 160° Aperture: F2.0 Shutter: Rolling Shutter Min.Illumination: 0.001Lux Weight: 3g （without cable） Dimensions: 14*14*16.8mm Coaxial Cable: 90mm(default)/140mm VTX Model: Avatar HD Mini VTX V3 Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP) FCC:&lt;27dBm;CE:&lt;14dBm;SRRC:&lt;20dBm; MIC:&lt;25dBm I/O Interface: JST1.0*4(Power in)JST0.8*4(USB) Mounting Holes: 25.5*25.5mm(M2 hole);20*20mm(M3 hole) Dimensions: 31.5*31.5*9.4mm Storage: 32G Recording: 1080p/720p Weight: 13.4g Operating Temperature: -20-40℃ Channels: 8 Wide Power Input: 3.1V-13V Supported FC System: Betaflight; Inav; Fettec; Kiss; ArduPliot OSD: Canvas mode Latency Average latency: 22ms Antenna: 1(IPEX) VTX Antenna Model: Avatar V2

The Walksnail Avatar HD Nano Kit V3 features 32GB of built-in storage, and supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. 

Walksnail Avatar HD Nano Kit V3




Product Features:



3.1~13V
500mW


FOV160°
Metal case


1080P/60fps
4:3 native sensor


Built-in 32G storage
18.5g light-weight


Nano Camera 14*14mm
 




 
Bullet Points:

The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flying footage with exceptional clarity and detail.



  

Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range.



 

Nano camera V3 with dimensions of 14*14mm and a weight of only 3g, equipped with a 2.1mm lens and 160° FOV, provides clearer and more realistic image quality.



 

The Avatar vtx comes with 32g built-in storage, it can record 1080p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.




 

Canvas Mode：supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.






Q: Can I use analog channels?/Can I fly with other analog pilots?
A: Yes, when you upgrade the firmware to 34.40.15 version, need switch to racing mode.
  





Specification

 


Camera



Model   
Avatar HD Nano Camera V3


Image Sensor 
1/3.2-Inch 4Mp 4:3 sensor


Resolution  
1080P/60fps,720P/120fps,720P/60fps


Ratio      

4:3 native / 16:9  


Lens 
2.1mm


FOV    
160°


Aperture    
F2.0


Shutter 
Rolling Shutter 


Min.Illumination  
0.001Lux


Weight 
3g （without cable）


Dimensions 
14*14*16.8mm


Coaxial Cable 
90mm(default)/140mm






VTX



Model
Avatar HD Mini VTX V3


Communication Frequency
5.725-5.850GHz


Transmitter Power (EIRP)
FCC:&lt27dBmCE:&lt14dBmSRRC:&lt20dBmMIC:&lt25dBm


I/O Interface
JST1.0*4(Power in)JST0.8*4(USB)


Mounting Holes
25.5*25.5mm(M2 hole)20*20mm(M3 hole)


Dimensions
31.5*31.5*9.4mm


Storage
32G


Recording
1080p/720p


Weight
13.4g



Operating Temperature
-20-40℃


Channels
8


Wide Power Input
3.1V-13V


Supported FC System
Betaflight Inav Fettec Kiss ArduPliot


OSD
Canvas mode


Latency
Average latency 22ms


Antenna
 1(IPEX)






VTX Antenna



Model
Avatar V2 antenna


Polarization
LHCP


Bandwidth
5600MHz-6000MHz


Average Gain
1.9dBi


VSWR
≤1.5


Interface
IPEX-1



Line Length
105mm


Dimension
R15*45mm(without cable)


Weight
2g






Packing List



Avatar HD Nano Kit V3
X1


4 Pin USB Cable
X1


4 Pin Power Cable
X1


M2x4/5/6mm Screws 
X2


M2x14mm Screws  
X4


M2*5*0.5mm washer
X4


2.1x3.4x1mm Gasket  
X5


14 to19mm bracket
X1





 




Product Features: 3.1~13V 500mW FOV160° Metal case 1080P/60fps 4:3 native sensor Built-in 32G storage 18.5g light-weight Nano Camera 14*14mm     Bullet Points: The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flyi

The Walksnail Avatar HD Nano Camera V3 /  Avatar HD Mini VTX V3 features a nano digital camera, antenna, and mini VTX that works with HD goggles such as the Walksnail Avatar and Fat Shark HD Dominator. The Avatar V3 is the upgraded version of the Avatar 1S, where the V3 improves with 32G of storage, 500mW of power, a native 4:3 sensor, and a wide voltage range of 3.1-13V. 
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

3.1~13V
500mW
FOV160°
Metal case
1080P/60fps
4:3 native sensor
Built-in 32G storage
18.5g light-weight
Nano Camera 14x14mm



Walksnail Avatar HD Nano Kit V3

The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flying footage with exceptional clarity and detail.



Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range.



Nano camera V3 with dimensions of 14*14cm and a weight of only 3g, equipped with a 2.1mm lens and 160° FOV, provides clearer and more realistic image quality.



The Avatar VTX comes with 32g built-in storage, it can record 1080p HD and interference-free flight footage without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.



Canvas Mode: supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.






Q: Can I use analog channels?/Can I fly with other analog pilots?
A: Yes, when you upgrade the firmware to 34.40.15 version, need switch to racing mode.

Specifications
Camera

Model: Avatar HD Nano Camera V3
Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 4:3 native / 16:9
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling Shutter
Min.Illumination: 0.001Lux
Weight: 3g （without cable）
Dimensions: 14x14x16.8mm
Coaxial Cable: 90mm(default)/140mm

VTX

Model Avatar HD Mini VTX V3
Communication Frequency 5.725-5.850GHz
Transmitter Power (EIRP) FCC:&lt27dBmCE:&lt14dBmSRRC:&lt20dBm
MIC:&lt25dBm
I/O Interface JST1.0x4(Power in)JST0.8x4(USB)
Mounting Holes 25.5x25.5mm(M2 hole)20x20mm(M3 hole)
Dimensions 31.5x31.5x9.4mm
Storage 32G
Recording 1080p/720p
Weight 13.4g
Operating Temperature -20-40℃
Channels 8
Wide Power Input 3.1V-13V
Supported FC System Betaflight Inav Fettec Kiss ArduPliot
OSD Canvas mode
Latency Average latency 22ms
Antenna 1(IPEX)

VTX Antenna

Model: Avatar V2 antenna
Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Average Gain: 1.9dBi
VSWR: ≤1.5
Interface: IPEX-1
Line Length: 105mm
Dimension: R15x45mm(without cable)
Weight: 2g

Includes

1x Walksnail Avatar HD Nano V3 VTX Kit w/ Nano Camera
1x 4 Pin USB Cable

1x 4 Pin Power Cable

2x M2x4/5/6mm Screws

4x M2x14mm Screws  

4x M2x5x0.5mm washer

5x 2.1x3.4x1mm Gasket

1x 14 to19mm bracket




Walksnail Avatar HD Nano V3 20x20 VTX Kit w/ Nano Camera (Compatible w

Introducing the new Walksnail Avatar HD Nano Kit V3 for the all new Walksnail Avatar/Fatshark Dominator Digital HD FPV System. Don't forget to check out the rest of our Video Transmitters and Walksnail Products!! Bullet Point for Walksnail Avatar HD Nano Kit V3 The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, 

Walksnail Avatar HD Nano Kit V3 for Walksnail Avatar/Fatshark Dominator HD FPV System

HDZero Freestyle V2 1W Digital HD VTX Kit

Divimath


HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Moreover, the antenna and MIPI cable are secured with a retention bar and screws. This VTX supports 720p60, 1080p30, 540p60, and 540p90 video modes. 























This VTX can fit most frames that can accommodate the Caddx Vista/Runcam Link VTX.
The kit includes a Runcam HDZero Nano 90, HDZero RHCP Antenna, and a 120mm MIPI Cable. 
The RunCam HDZero Nano 90 HD Camera is the first 90fps camera for HDZero VTX. This camera enables HDZero to be 5ms faster than analog 60i video to show a full field/frame.











Check out all our VTXs and our HDZero selection.
















Specification
Freestyle V2 VTX

Manufacturer:  Divimath, Inc
Model:  HDZero Freestyle V2 VTX
Weight:  22.3g
Dimensions:  29x30x14mm
Operating Frequency:  5.725-5.850GHz
Transmitter Power:  25mW, 200mW, XXXXmW
Mounting Pattern:  20x20mm M2 Holes
Antenna Interface:  Secured u.FL
Video In:  Secured MIPI
SmartAudio:  YES
MSP Canvas Mode:  YES
Input Power:  7-25V
Operating Temperature:  32F-104F (0-40C)
Power Consumption:  6-15W

Runcam HDZero Nano 90

Resolution: 540P@90fps 4:3 | 720P@60fps 4:3
Dimensions: L18mmxW14mmxH18mm
Lens: FOV D:160° H:127° V:92°
Net Weight: 5.2g(without cable)
Shutter: Rolling Shutter
Image Sensor: 1/3&quot

Includes

1x  HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL

1x Nano 90 Camera (with 19 x 19 Mount)


1x HDZero RHCP Antenna


1x 120mm MIPI Cable


1x Power Cable


1x SA Cable


1x Plastic bar for MIPI Cable with 3x Screws (M1.4 x 2mm)


1x Plastic bar for U.FL with 3x Screws (M1.4 x 8mm)

1x Double Sided Tape (29 x 30 x 1mm)

Wiring Diagram


HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Moreover, the ante

HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX Kit - U.FL from WREKD Co.

HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX Kit - U.FL

The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws.
The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes.
The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities.
Specifications




Manufacturer


    Divimath, Inc




Model


    HDZero Freestyle V2 VTX




Weight


    22.3 g




Dimensions


    29x30x14mm




Operating Frequency


    5.725-5.850GHz




Transmitter Power


    25mW,200mW




Mounting Pattern


    20x20mm M2 holes




Antenna Interface


    Secured U.FL




Video In


    Secured MIPI




SmartAudio


    Yes




MSP Canvas Mode


    Yes




Input Power


    7-25V




Operating Temperature


    32˚F-104 ˚F (0˚-40˚C)




Power Consumption


    6-15W




 
Includes

1x Freestyle V2 VTX
1x Nano 90 Camera (with 19 x 19 Mount)
1x HDZero RHCP antenna
1x 120mm Mipi Cable
1x Power Cable
1x SA Cable
1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).
1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)
1x Double Sided Tape (29 x 30 x 1mm )



The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP

HDZero Freestyle V2 KIT

HDZERO


HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Moreover, the antenna and MIPI cable are secured with a retention bar and screws. This VTX supports 720p60, 1080p30, 540p60, and 540p90 video modes. 























This VTX can fit most frames that can accommodate the Caddx Vista/Runcam Link VTX.
The kit includes a Runcam HDZero Nano 90, HDZero RHCP Antenna, and a 120mm MIPI Cable. 
The RunCam HDZero Nano 90 HD Camera is the first 90fps camera for HDZero VTX. This camera enables HDZero to be 5ms faster than analog 60i video to show a full field/frame.











Check out all our VTXs and our HDZero selection.
















Specification
Freestyle V2 VTX

Manufacturer:  Divimath, Inc
Model:  HDZero Freestyle V2 VTX
Weight:  22.3g
Dimensions:  29x30x14mm
Operating Frequency:  5.725-5.850GHz
Transmitter Power:  25mW, 200mW, XXXXmW
Mounting Pattern:  20x20mm M2 Holes
Antenna Interface:  Secured u.FL
Video In:  Secured MIPI
SmartAudio:  YES
MSP Canvas Mode:  YES
Input Power:  7-25V
Operating Temperature:  32F-104F (0-40C)
Power Consumption:  6-15W

Runcam HDZero Nano 90

Resolution: 540P@90fps 4:3 | 720P@60fps 4:3
Dimensions: L18mmxW14mmxH18mm
Lens: FOV D:160° H:127° V:92°
Net Weight: 5.2g(without cable)
Shutter: Rolling Shutter
Image Sensor: 1/3"

Includes

1x  HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL

1x Nano 90 Camera (with 19 x 19 Mount)


1x HDZero RHCP Antenna


1x 120mm MIPI Cable


1x Power Cable


1x SA Cable


1x Plastic bar for MIPI Cable with 3x Screws (M1.4 x 2mm)


1x Plastic bar for U.FL with 3x Screws (M1.4 x 8mm)

1x Double Sided Tape (29 x 30 x 1mm)

Wiring Diagram


HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL

Description
The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws.
The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes.
The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities.
This VTX can fit most frames that can accommodate the Caddx Vista/Runcam Link VTX.
The kit includes a Runcam HDZero Nano 90, HDZero RHCP Antenna, and a 120mm MIPI Cable. 
The RunCam HDZero Nano 90 HD Camera is the first 90fps camera for HDZero VTX. This camera enables HDZero to be 5ms faster than analog 60i video to show a full field/frame.
Specifications




Manufacturer


    Divimath, Inc




Model


    HDZero Freestyle V2 VTX




Weight


    22.3 g




Dimensions


    29x30x14mm




Operating Frequency


    5.725-5.850GHz




Transmitter Power


    25mW,200mW




Mounting Pattern


    20x20mm M2 holes




Antenna Interface


    Secured U.FL




Video In


    Secured MIPI




SmartAudio


    Yes




MSP Canvas Mode


    Yes




Input Power


    7-25V




Operating Temperature


    32˚F-104 ˚F (0˚-40˚C)




Power Consumption


    6-15W




 
 
Includes
 

1x Freestyle V2 VTX
1x Nano 90 Camera (with 19 x 19 Mount)
1x HDZero RHCP antenna
1x 120mm Mipi Cable
1x Power Cable
1x SA Cable
1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).
1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)
1x Double Sided Tape (29 x 30 x 1mm )


Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for p

HDZero Freestyle V2 Kit

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Manufacturer &#009&#009&#009&#009&#009&#009&#009&#009&#009    Divimath, Inc&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Model&#009&#009&#009&#009&#009&#009&#009&#009&#009    HDZero Freestyle V2 VTX&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight&#009&#009&#009&#009&#009&#009&#009&#009&#009    22.3 g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Dimensions&#009&#009&#009&#009&#009&#009&#009&#009&#009    29x30x14mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Frequency &#009&#009&#009&#009&#009&#009&#009&#009&#009    5.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Transmitter Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    25mW,200mW&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting Pattern&#009&#009&#009&#009&#009&#009&#009&#009&#009    20x20mm M2 holes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Antenna Interface&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured U.FL &#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video In&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured MIPI&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SmartAudio&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009MSP Canvas Mode&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Input Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    7-25V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Temperature&#009&#009&#009&#009&#009&#009&#009&#009&#009    32˚F-104 ˚F (0˚-40˚C)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power Consumption&#009&#009&#009&#009&#009&#009&#009&#009&#009    6-15W&#009&#009&#009&#009&#009&#009  Includes &#0091x Freestyle V2 VTX&#0091x Nano 90 Camera (with 19 x 19 Mount)&#0091x HDZero RHCP antenna&#0091x 120mm Mipi Cable&#0091x Power Cable&#0091x SA Cable&#0091x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).&#0091x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)&#0091x Double Sided Tape (29 x 30 x 1mm )

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  									Manufacturer 									    Divimath, Inc													Model									    HDZero Freestyle V2 VTX													Weight									    22.3 g													Dimensions									    29x30x14mm													Operating Frequency 									    5.725-5.850GHz													Transmitter Power									    25mW,200mW													Mounting Pattern									    20x20mm M2 holes													Antenna Interface									    Secured U.FL 													Video In									    Secured MIPI													SmartAudio									    Yes													MSP Canvas Mode									    Yes													Input Power									    7-25V													Operating Temperature									    32˚F-104 ˚F (0˚-40˚C)													Power Consumption									    6-15W						  Includes 	1x Freestyle V2 VTX	1x Nano 90 Camera (with 19 x 19 Mount)	1x HDZero RHCP antenna	1x 120mm Mipi Cable	1x Power Cable	1x SA Cable	1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).	1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)	1x Double Sided Tape (29 x 30 x 1mm )

HDZero Freestyle V2 Kit | HDZERO

HDZero Freestyle V2 20x20 25-1000mW HD VTX Kit W/u.FL

The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. 
The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. 
The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. 
Specifications 

Operating Frequency: 5.725-5.850GHz
Transmitter Power: 25mW,200mW
Mounting Pattern: 20x20mm M2 holes
Antenna Interface: Secured U.FL
Video In: Secured MIPI
SmartAudio: Yes
MSP Canvas Mode: Yes
Input Power: 7-25V
Operating Temperature: 32˚F-104 ˚F (0˚-40˚C)
Power Consumption: 6-15W
Dimensions: 29x30x14mm
Weight: 22.3g


Includes 

1x Freestyle V2 VTX
1x Nano 90 Camera (with 19 x 19 Mount)
1x HDZero RHCP antenna
1x 120mm Mipi Cable
1x Power Cable
1x SA Cable
1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).
1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)
1x Double Sided Tape (29 x 30 x 1mm )


Freestyle V2 Kit For HDZero Video System

The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications Operating Frequency: 5.725-5.850GHz Transmitter Power: 25mW,200mW Mounting Pattern: 20x20mm M2 holes Antenna Interface: Secured U.FL Video In: Secured MIPI SmartAudio: Yes MSP Canvas Mode: Yes Input Power: 7-25V Operating Temperature: 32˚F-104 ˚F (0˚-40˚C) Power Consumption: 6-15W Dimensions: 29x30x14mm Weight:

The HDZero Freestyle V2 VTX Kit is a 2nd generation 5.8GHz digital video transmitter kit with a camera, VTX, and antenna that can fit most of the 3.5-inch and 5-inch drones.&nbsp

The HDZero Freestyle V2 VTX Kit is a 2nd generation 5.8GHz digital video transmitter kit with a camera, VTX, and antenna that can fit most of the 3.5-inch and 5-inch drones. 

HDZero Freestyle V2 VTX Kit

HDZero Freestyle V2 1W Digital HD VTX

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Manufacturer &#009&#009&#009&#009&#009&#009&#009&#009&#009    Divimath, Inc&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Model&#009&#009&#009&#009&#009&#009&#009&#009&#009    HDZero Freestyle V2 VTX&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight&#009&#009&#009&#009&#009&#009&#009&#009&#009    22.3 g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Dimensions&#009&#009&#009&#009&#009&#009&#009&#009&#009    29x30x14mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Frequency &#009&#009&#009&#009&#009&#009&#009&#009&#009    5.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Transmitter Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    25mW,200mW&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting Pattern&#009&#009&#009&#009&#009&#009&#009&#009&#009    20x20mm M2 holes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Antenna Interface&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured U.FL &#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video In&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured MIPI&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SmartAudio&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009MSP Canvas Mode&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Input Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    7-25V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Temperature&#009&#009&#009&#009&#009&#009&#009&#009&#009    32˚F-104 ˚F (0˚-40˚C)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power Consumption&#009&#009&#009&#009&#009&#009&#009&#009&#009    6-15W&#009&#009&#009&#009&#009&#009  Includes &#0091x Freestyle V2 VTX&#0091x Power Cable&#0091x SA Cable&#0091x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).&#0091x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)&#0091x Double Sided Tape (29 x 30 x 1mm)

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  									Manufacturer 									    Divimath, Inc													Model									    HDZero Freestyle V2 VTX													Weight									    22.3 g													Dimensions									    29x30x14mm													Operating Frequency 									    5.725-5.850GHz													Transmitter Power									    25mW,200mW													Mounting Pattern									    20x20mm M2 holes													Antenna Interface									    Secured U.FL 													Video In									    Secured MIPI													SmartAudio									    Yes													MSP Canvas Mode									    Yes													Input Power									    7-25V													Operating Temperature									    32˚F-104 ˚F (0˚-40˚C)													Power Consumption									    6-15W						  Includes 	1x Freestyle V2 VTX	1x Power Cable	1x SA Cable	1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).	1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)	1x Double Sided Tape (29 x 30 x 1mm)