FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Capacity (mAh)

C Rating

DJI FPV Fly More Kit

DJI FPV Fly More Kit - Intelligent Flight Battery (2ct) w/ Charging Hub

The DJI FPV Fly More Kit includes a Battery Charging Hub and two Intelligent Flight Batteries with individual capacities of up to 2000mAh. With a built-in DJI Intelligent Battery Management System, battery status is monitored and reported in real-tim

The DJI FPV Fly More Kit contains two DJI FPV Intelligent Flight Batteries and a DJI FPV Battery Charging Hub for extended flight time for your DJI FPV Drone Combo! To help you to Fly More! The rated capacity for each battery is up to 44.4 Wh, supporting flight for approximately 20 minutes. The built-in intelligent bat

DJI Flymore Kit

DJI has redefined the drone racing industry with the new Digital FPV System. It delivers lower latency rates within 28 ms, a 4km maximum transmission range, stunning HD 720p/120fps resolution, and, most importantly, an unforgettable FPV flying experience.

The DJI FPV Fly More Combo includes one (1) DJI Digital HD FPV Goggle, one (1) FPV Air Unit, and one (1) DJI FPV Remote Controller. Experience the ultimate FPV setup with everything you need all in one package. The DJI FPV system will let you enjoy FPV in real HD without all the annoying lag that accompanies many HD systems.

Don't need the DJI Remote Controller? You are looking for the Experience Combo. Don't need two air units? Just buy the FPV Goggles and Air Unitseparately. There currently is no bundle with just FPV goggles and a single air unit.

Enter the new era of FPV with DJI.

12/2/2019 New Firmware update brings a host of updates and new features to the DJI FPV System!

Full release notes here.

DJI FPV Goggles

The DJI Digital HD FPV Goggles are truly one-of-a-kind, in performance and style. DJI has created and honed its digital transmission system to satisfy the demands of drone pilots (no easy task).

Racing and freestyle drone pilots alike want the fastest response, lowest latency and clearest video in their FPV system in order to perform fast movements with the most accuracy. Analog video was the best way to achieve low latency and fast response, but the video was never very clear. And conversely with digital, the video was clear and crisp, but there was a noticeable delay that many pilots couldn't live with - plus digital HD systems were bulky and cumbersome to put on your drone.

Well, all of that is changed with DJI's entry to Digital HD. Crystal clear 720p 120fps video directly to your goggles, with the lowest latency ever before on a digital HD system!

DJI FPV Air Unit

FPV through the DJI Digital HD Air Unit is the way FPV is meant to be. This 5.8Ghz air unit (FPV camera + VTX) provides amazing visual clarity that is able to be transmitted to your DJI Goggles through its built-in receiver module. The DJI FPV Air Unit provides ultra-low latency HD digital image transmission, built-in 1080p/60fps DVR recording, and eight frequency channels to allow up to eight pilots to fly simultaneously.

Digital HD systems have traditionally been rather bulky and unwieldy to mount on a mini quad. Not anymore. With this air unit, you can comfortably fit the module in your mini quad stack (probably not slammed frames). The 'mini' camera fits easily into your existing builds, no weird mounting adapters.

DJI FPV Remote Controller

DJI's FPV Remote Controller was made for racing and freestyle pilots. The added switches give more configuration options than previous DJI remote controllers. Syncs perfectly with the DJI FPV Air Unit for seamless integration into your drone builds.

With the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. Users can also enjoy 7ms ultra-low latency between the remote controller and the air unit.

&ampnbsp
Specifications
DJI FPV Goggles

Weight: Approx. 415 g (headband and antennas included)

Dimensions:
202 × 126 × 110 mm (antennas included)
184 × 122 × 110 mm (antennas excluded)

Screen Size: 2-inch × 2
Screen Resolution (Single Screen) : 1440 × 810
Screen Renew Rate: 120 Hz
Communication Frequency: 5.725-5.850 GHz
Transmitter Power (EIRP) : FCC/MIC: &amplt30 dBm CE: &amplt14 dBm SRRC: &amplt19 dBm

Live View Mode
Low Latency Mode (720p/120fps)
High-Quality Mode (720p/60fps)

Video Format: MP4 (Video format: H.264)
Supported Video Play Format: MP4, MOV, MKV (Video format: H.264 Audio format: AAC-LC, AAC-HE, AC-3, MP3)
Operating Temperature: 32° to 104° F (0° to 40° C)
Power Input: 7.4-17.6 V
FOV Adjustable from 30° to 54°. Adjustable image size from 50%-100%
Interpupillary Distance Range: 58 -70 mm
Battery: 6.6V-21.75V
External battery, total power consumption of 7W
Supported Storage Card: microSD cards with capacities of up to 128GB

DJI FPV Air Unit

Weight
Air Unit (Camera included): 45.8 g
3.9 g (MMCX elbow each)

Dimensions
Air Unit: 44 × 37.8 × 14.4 mm
Camera: 27.4 × 21.1 × 20.1 mm
Coaxial Cable: 100 mm

Operating Frequency: 5.725-5.850 GHz
Transmitter Power (EIRP): FCC/SRRC: &amplt30 dBm CE: &amplt14 dBm

Min. Latency (end-to-end)
Low Latency Mode (720p/120fps): &amplt28 ms
High-Quality Mode (720p/60fps): &amplt40 ms

Max. Transmission Distance: FCC/SRRC: &amplt4 km CE: &amplt0.7 km
Video Format: MP4 (Video format: H.264 Audio format: ACC-LC)
I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Input Power: 7.4-17.6 V, about 4-9 W
Sensor: 1/3.2'' CMOS Effective Pixels: 4 M
Lens: 2.1 mm, f/2.1
Shutter: Rolling shutter
ISO: 100-25600
FOV: 150°(D) 122°(H) 93°(V)
Dimension: 22.1 × 21.1 × 20.1 mm
Weight: 8.2 g

Channels: 8
Channels Info
FCC
Channel 1: 5660
Channel 2: 5695
Channel 3: 5735
Channel 4: 5770
Channel 5: 5805
Channel 6: 5878
Channel 7: 5914
Channel 8: 5839

Note: The Air Unit Module does get very hot in use. Do not power on for an extended period of time without proper cooling (AKA flying).

DJI FPV Remote Controller

Remote Controller
Weight: 765 g
Operation Frequency: 5.725-5.850 GHz
Max. Transmission Distance (Unobstructed,free of interference): FCC/SRRC: 4 km CE: 0.7 km
Transmitter Power (EIRP): FCC: &amplt30 dBm CE: &amplt14dBm SRRC:&amplt19dBm
Operation Current/Voltage: 0.6 A @ 7.6 V
Operation Temperature: 0° to 40°C (32° to 104°F)
Charging Temperature: 5° to 40°C (41° to 104°F)

Remote Controller Intelligent Battery
Battery Type: LiPo 2S
Capacity: 4920 mAh
Voltage: 7.6 V
Energy: 37.39 Wh

It is recommended to use the USB adapter of DJI Goggles RE, Ronin-S, Spark or an FCC/CE certified USB adapter that supports Quick Charge 2.0.
If you use the DJI FPV Goggles and the DJI FPV Remote Controller at the same time, you must first link the air unit and the goggles, and then link the remote controller.
Includes

 	1 x DJI FPV Goggles
 	1 x DJI FPV Air Unit
 	1 x DJI FPV Remote Controller
 	4 x Goggle Antennas
 	1 x USB-C Cable
 	1 x Headband
 	1 x Sleeve
 	1 x Power Cable
 	2 x Antenna (MMCX 90)
 	1 x 3-in-1 Cable
 	4 x M2 Screw

&ampnbsp

&ampnbsp

DJI has redefined the drone racing industry with the new Digital FPV System. It delivers lower latency rates within 28 ms, a 4km maximum transmission range, stunning HD 720p/120fps resolution, and, most importantly, an unforgettable FPV flying experience. The DJI FPV Fly More Combo includes one (1) DJI Digital HD FPV Goggle, one (1) FPV [...]

DJI FPV Fly More Combo - GEPRC

DJI FPV Fly More Combo

Cells

Most quads use lipo batteries, except long-range builds which can use li-ion batteries. Based on your motor selection and frame size, we show you lipo batteries with appropriate cell counts and mAh capacity. Ensure that your connector matches that of your ESC (XT60/XT30/etc). 

LiPo / LiHV Batteries

LiPo Connector

Flywoo

Flywoo Explorer V2 750mAh 1S 3.8V 80C LiHV Battery - A30

FLYWOO

About this product Designed to handle up to 15A of continuous current while providing a reliable connection with minimal resistance, A30 High Current Connectors are engineered for maximum performance. SPECIFICATION Minimum Capacity: 50mAh Configuration: 1S1P / 4.35V / 1 Cell Discharge Rate: 80C Weight: 13.2g Discharge 

4pcs Explorer 1S 750mAh HV V2 A30 Plug

Flywoo Explorer 750mAh 1S HV V2 battery is designed to handle up to 15A of continuous current while providing a reliable connection with minimal resistance. The A30 High Current Connectors are engineered for maximum performance.

#html-body [data-pb-style=CSUNXF8],#html-body [data-pb-style=P32F944]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body

Flywoo Explorer 750mAh 1S HV V2 LiPo Battery (4Pcs) - A30

<p data-mce-fragment="1"><span style="color: #ff2a00"><b data-mce-fragment="1">All batteries must be shipped by a ground shipping method.</b></span></p>
<p data-mce-fragment="1"><span>Explorer series batteries are specially designed for long flight time and all are high voltage batteries.  Using this battery will give you a significant increase in flight time as well as a bit more power over the stock battery.</span></p>
<p data-mce-fragment="1">Check out our other<span data-mce-fragment="1"> </span><a href="https://www.racedayquads.com/collections/1s-batteries" data-mce-fragment="1" data-mce-href="https://www.racedayquads.com/collections/1s-batteries" target="_blank">1S batteries</a>, as well as the rest of our<span data-mce-fragment="1"> </span><a href="https://www.racedayquads.com/collections/flywoo-products" data-mce-fragment="1" data-mce-href="https://www.racedayquads.com/collections/flywoo-products" target="_blank">Flywoo</a><span data-mce-fragment="1"> </span>selection!</p>
<h3 data-mce-fragment="1">Specifications</h3>
<ul data-mce-fragment="1">
<li data-mce-fragment="1">Nominal Voltage: 3.8V</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Cells: </span>1S</li>
<li data-mce-fragment="1">Configuration: 1S1P / 4.35V / 1 Cell</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Capacity: 750</span>Ah</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Discharge Rate: </span>80<span data-mce-fragment="1">C</span>
</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Composition: </span>LiHV</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Weight: </span><span data-mce-fragment="1" mce-data-marked="1">14g</span><br>
</li>
<li data-mce-fragment="1"><span data-mce-fragment="1">Connector: A30</span></li>
</ul>
<h3 data-mce-fragment="1">Includes</h3>
<ul>
<li>1x Flywoo Explorer V2 3.8V 1S 450mAh 80C LiHV Battery 4 Pack - A30</li>
</ul>

All batteries must be shipped by a ground shipping method. Explorer series batteries are specially designed for long flight time and all are high voltage batteries.  Using this battery will give you a significant increase in flight time as well as a bit more power over the stock battery. Check out our other 1S batterie

Flywoo Explorer V2 3.8V 1S 750mAh 80C LiHV Battery 4 Pack - A30

Flywoo Explorer V2 450mAh 1S 3.8V 80C LiHV Battery - A30

Flywoo Explorer 450mAh 1S HV V2 battery is designed to handle up to 15A of continuous current while providing a reliable connection with minimal resistance. The A30 High Current Connectors are engineered for maximum performance.

#html-body [data-pb-style=P0NYINY],#html-body [data-pb-style=XSH5556]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body

Flywoo Explorer 450mAh 1S HV V2 LiPo Battery (4Pcs) - A30

About this product Designed to handle up to 15A of continuous current while providing a reliable connection with minimal resistance, A30 High Current Connectors are engineered for maximum performance. SPECIFICATION Minimum Capacity: 450mAh Configuration: 1S1P / 4.35V / 1 Cell Discharge Rate: 80C Weight: 13.2g Discharge

4pcs Explorer 1S 450mAh HV V2 A30 Plug

<p data-mce-fragment="1"><span style="color: #ff2a00"><b data-mce-fragment="1">All batteries must be shipped by a ground shipping method.</b></span></p>
<p data-mce-fragment="1"><span>Explorer series batteries are specially designed for long flight time and all are high voltage batteries.  Using this battery will give you a significant increase in flight time as well as a bit more power over the stock battery. </span></p>
<p data-mce-fragment="1">Check out our other<span data-mce-fragment="1"> </span><a data-mce-fragment="1" href="https://www.racedayquads.com/collections/1s-batteries" data-mce-href="https://www.racedayquads.com/collections/1s-batteries" target="_blank">1S batteries</a>, as well as the rest of our<span data-mce-fragment="1"> </span><a data-mce-fragment="1" href="https://www.racedayquads.com/collections/flywoo-products" data-mce-href="https://www.racedayquads.com/collections/flywoo-products" target="_blank">Flywoo</a><span data-mce-fragment="1"> </span>selection!</p>
<h3 data-mce-fragment="1">Specifications</h3>
<ul data-mce-fragment="1">
<li data-mce-fragment="1">Nominal Voltage: 3.8V</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Cells: </span>1S</li>
<li data-mce-fragment="1">Configuration: 1S1P / 4.35V / 1 Cell</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Capacity: </span>450mAh</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Discharge Rate: </span>80<span data-mce-fragment="1">C</span>
</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Composition: </span>LiHV</li>
<li data-mce-fragment="1">
<span data-mce-fragment="1">Weight: </span><span data-mce-fragment="1">13.2</span><span data-mce-fragment="1">g</span><br>
</li>
<li data-mce-fragment="1"><span data-mce-fragment="1">Connector: A30</span></li>
</ul>
<h3 data-mce-fragment="1">Includes</h3>
<ul>
<li>1x Flywoo Explorer 3.8V 1S 450mAh 80C LiHV Battery 4 Pack - A30</li>
</ul>

All batteries must be shipped by a ground shipping method. Explorer series batteries are specially designed for long flight time and all are high voltage batteries.  Using this battery will give you a significant increase in flight time as well as a bit more power over the stock battery.  Check out our other 1S batteri

Flywoo Explorer V2 3.8V 1S 450mAh 80C LiHV Battery 4 Pack - A30

BetaFPV

BetaFPV 850mAh 4S 75C Battery 2 Pack

BETAFPV 850mAh 4S battery has 4S(14.8V) high voltage and 75C high discharge rate. With 850mAh large battery capacity, it will greatly extend the flight time. What's more, with the outstanding discharge performance, it allows you to accelerate to the full speed in a short time, and perform more actions during the flight

BetaFPV 850mAh 4S 75C Lipo Battery (2PCS) - XT60

BetaFPV 850mAh 4S 75C Lipo Battery (2PCS) - XT30

BETAFPV

The BETAFPV 850mAh 4S battery has 4S (14.8V) high voltage and 75C high discharge rate. Coming in at 850mAh, you are sure to get longer flight time and be able to accelerate to the full speed in a short period of time. This battery is perfectly suitab

BETAFPV 850mAh 4S 75C Battery (2pcs)

BETAFPV 850mAh 4S battery has 4S(14.8V) high voltage and 75C high discharge rate. With 850mAh large battery capacity, it will greatly extend the flight time. What's more, with the outstanding discharge performance, it allows you to accelerate to the full speed in a short time, and perform more actions during the flight. BETAFPV 850mAh 4S battery is perfectly suitable for the 3-5 inch Toothpick Quad, such as TWIG Mutant 4'', TWIG ET5, and X-Knight 4'' FPV Toothpick Quad.

Specification

Items: 850mAh 3S/4S battery

Capacity: 850mAh
Power: 12.58Wh
Rate: 75C
Weight: 101g(4S)/76g(3S)

Dimension: 62*28*28mm

Charge Plug: XT60U/XT30 Plug and JST-XH Plug
Wire Gauge: 14AWG Silicone Wire
Applicable Toothpick Quad: X-Knight 4'' FPV Toothpick Quad, TWIG ET5 Toothpick Quad and TWIG Mutant 4'' Toothpick Quad

Comparision
There is a graph of comparison between BETAFPV 850mAh 4S battery and other 850mAh 4S batteries. The discharge current is 40A in this testing. In this battery experience, you could see that the BETAFPV 850mAh 4S battery has a better discharge performance, and it can give you a more powerful flight experience.

Dimension


Package

2 * BETAFPV 850mAh 3S/4S 75C Lipo Battery

Note:
1. Before you buy the batteries, please take a look at our shipping information page to check if we can ship batteries to your countries.
2. The ETA of the battery parcel is slower than the parcel that excludes batteries. Shipping Information Page.

850mAh 3S/4S 75C Lipo Battery (2PCS)

BetaFPV 450mAh 1S 3.8V 30C LiHV Whoop/Micro Battery - BT2.0

<p><span style="color: #ff0000"><strong>All batteries must be shipped by a ground shipping method. New Packaging!</strong></span></p>
<p><span>After</span><span> </span><span>BT2.0 300mAh 1S battery</span><span>, BT2.0 450mAh 1S battery is </span><span class="" id="w_246" high-light-id="w_235,w_246,w_247">following<span> </span></span><span class="" id="w_247" high-light-id="w_235,w_246,w_247">close<span> </span></span><span class="" id="w_248" high-light-id="w_236,w_248">at its</span><span id="w_249" high-light-id=""> </span><span id="w_250" high-light-id="">heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has </span><span>exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time and better performance,</span><span> just need to simply modify its connector to BT2.0 connector.</span></p>
<p>BT2.0 Connector - the most significant revolution in 1S Whoop Drone.</p>
<p>We also carry<span> </span><a title="betafpv 1s 260mah lihc battery for Sale at RaceDayQuads" href="https://www.racedayquads.com/products/betafpv-3-8v-1s-260mah-30c-lihv-whoop-micro-battery-8-pack-bt2-0" target="_blank">260mAh</a>, <a title="betafpv 1s 300 lihv battery for Sale at RaceDayQuads" href="https://www.racedayquads.com/products/betafpv-3-8v-1s-300mah-30c-lihv-whoop-micro-battery-8-pack-bt2-0" target="_blank">300mAh</a><span> </span>and<span> </span><a title="betafpv 1s 450 bt2.0 lipo for Sale at RaceDayQuads" href="https://www.racedayquads.com/products/betafpv-3-8v-1s-450mah-30c-lihv-whoop-micro-battery-4-pack-bt2-0" target="_blank">450mAh</a><span> </span>1S BT2.0 packs! </p>
<p>Check out <a title="all 1s batteries for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/1s-batteries" target="_blank">all our 1S batteries</a> and our <a title="all betafpv FPV Products for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/betafpv-products" target="_blank">BetaFPV selection</a>!</p>
<p><span>Not sure if it's worth to switch BT2.0? Check more from </span>Joshua Bardwell<span>'video- Proof that BT2.0 connector is better than PH 2.0</span></p>
<div class="video-wrapper"><iframe src="https://www.youtube.com/embed/Xt0yARay6nw" height="315" width="560" allowfullscreen="" allow="accelerometer autoplay encrypted-media gyroscope picture-in-picture" frameborder="0"></iframe></div>
<p>Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demand. BETAFPV always keeps moving forward with passion for breakthrough experiences.</p>
<p>After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is <span class="" id="w_246" high-light-id="w_235,w_246,w_247">following<span> </span></span><span class="" id="w_247" high-light-id="w_235,w_246,w_247">close<span> </span></span><span class="" id="w_248" high-light-id="w_236,w_248">at its</span><span id="w_249" high-light-id=""> </span><span id="w_250" high-light-id="">heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has </span>exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What's more, it is highly recommended for <a title="emax tinyhawk FPV Products for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/emax-tinyhawk-accessories" target="_blank">Emax Tinyhawk</a>, which achieved dynamic balance, longer flight time and better performance, just need to simply modify its connector to <a title="bt2.0 connector pigtail  for Sale at RaceDayQuadsp" href="https://www.racedayquads.com/products/betafpv-bt2-0-1s-whoop-pigtail-cable-6-pack" target="_blank">BT2.0 connector</a>.</p>
<p><span><strong><img alt="" src="https://cdn.shopify.com/s/files/1/1778/6615/files/fb_ebad9a44-25ce-4dbf-8ee2-277157f17b5b_1024x1024.jpg?v=1576026437"></strong></span></p>
<h3>Features<br>
</h3>
<ul>
<li><span>BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.</span></li>
<li><span>By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. </span></li>
<li><span>BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with this BT2.0 450mAh 1S battery.</span></li>
<li>It is perfectly suitable for <span>Emax Tinyhawk, it can provide stable and consistent power, which achieved dynamic balance and longer flight time. Just need to simply modify the PH2.0 connector to BT2.0 connector.</span>
</li>
<li><span>Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. </span></li>
<li><span>High-end technology to guarantee high quality and consistent performance.</span></li>
<li>
<span>We released BT2.0-PH2.0 adapter cable, which is convenient to charge BT2.0 battery with stock PH2.0 charger. </span><span>Meanwhile,</span><span> we also release BT2.0 all-in-one battery Tester &amp charger for your need.</span>
</li>
</ul>
<h3>Specifications</h3>
<ul>
<li>Capacity: 450mAh<br>
</li>
<li>Rate: 30C/60C</li>
<li>Voltage: 4.35V</li>
<li>Dimension:<span> </span><span>61x15x7.5mm</span>
</li>
<li>Connector: Betafpv BT2.0 connector </li>
<li>Weight: 12.7g(1pcs)</li>
</ul>
<p><img alt="" src="https://cdn.shopify.com/s/files/1/1778/6615/files/468ef44610c31b5b50b747b4f9f5ee49_c5c1b919-7fdd-4614-b5ae-3e903b521462_480x480.jpg?v=1575707428"></p>
<h3>Includes</h3>
<ul>
<li>4x BT2.0 450mAh 1S 30C Battery</li>
</ul>
<ul></ul>
<ul></ul>
<ul></ul>
<div><br></div>
<ul></ul>
<h3>BT2.0 CONNECTOR</h3>
<p><span>There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.</span></p>
<div><img alt="" src="https://cdn.shopify.com/s/files/1/1778/6615/files/1_5700e561-20d4-4568-9ba9-93a7e6effe83_1024x1024.jpg?v=1575712569"></div>

All batteries must be shipped by a ground shipping method. New Packaging! After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has exclusive designed BT2.0 connector, which has broken through the bottle-neck

BetaFPV 3.8V 1S 450mAh 30C LiHV Whoop/Micro Battery 4 Pack - BT2.0

The BETAFPV BT2.0 450mAh 1S 30C HV Battery is made to fit 1S tiny whoop drones!
After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has

BETAFPV BT2.0 450mAh 1S 30C HV Battery (4pcs)

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.  Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0  Check out the rest of our 1S Batteries and our BetaFPV Products! Since February 2019, we've got some feedback on Fac

BETAFPV BT2.0 450mAh 1S 30C Battery (4PCS)

BT2.0 Connector - the most significant revolution in 1S Whoop Drone. 
Note: BT2.0 450mAh 1S 30C Battery is upgraded and optimized to battery length 1.7mm longer and battery port shell width 1mm narrow than the previous one. It is normal to use if the battery cell is visible. Because the battery sticker does not fully cover it. We will change the new battery sticker as soon as possible.
Not sure if it's worth switching to BT2.0? Check more from Joshua Bardwell'video- Proof that the BT2.0 connector is better than PH 2.0

Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demand. BETAFPV always keeps moving forward with a passion for breakthrough experiences.
After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with a BT2.0 connector in the current market, it has an exclusive designed BT2.0 connector, which has broken through the bottle-neck of the PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time, and better performance, just need to simply modify its connector to BT2.0 connector.

BULLET POINT

BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. 
BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with this BT2.0 450mAh 1S battery.
It is perfectly suitable for Emax Tinyhawk, it can provide stable and consistent power, which achieved dynamic balance and longer flight time. Just need to simply modify the PH2.0 connector to the BT2.0 connector.

Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. 
High-end technology to guarantee high quality and consistent performance.

We released the BT2.0-PH2.0 adapter cable, which is convenient to charge BT2.0 battery with a stock PH2.0 charger. Meanwhile, we also release BT2.0 all-in-one battery Tester &amp charger for your need.


SPECIFICATION

Item: 1S battery
Capacity: 450mAh
Rate: 30C/60C
Voltage: 4.35V
Dimension: 61*15*7.5mm

Connector: Betafpv BT2.0 connector 
Weight: 12.7g(1pcs)







BT2.0 CONNECTOR
There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has a much longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.

Much more choices of BT2.0 series accessories.  
We know some pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 Power whoop connectors for those people who wanna convert the PH2.0 connector to BT2.0 connector. 

BT2.0 Connectors (10pcs)
BT2.0 1S Whoop Cable Pigtail
BT2.0-PH2.0 Adapter Cable

Highly recommend the below products with BT2.0 connectors or cables. BETAFPV will collaborate closely with more brand manufacturers in the future, in order to bring better service and experience to customers.

BT2.0 450mAh 1S Battery
BT2.0 300mAh 1S Battery

BT2.0 Battery Charger and Voltage Tester 
BT2.0 Series Quadcopters
6 Ports 1S Battery Charger &amp Adapter
Other Brand Chargers &amp Batteries with BT2.0 port



Here is a Betafpv Lab video to show you the best way of replacing BT2.0 connectors.




PACKAGE


4 * BT2.0 450mAh 1S 30C Battery


 Note: 1. Some countries are not available to ship batteries only without purchasing of whoop drone.  2. The ETA of the battery parcel is slower than the parcel that excludes batteries. Please take a look at our Shipping Information Page.


BT2.0 Connector - the most significant revolution in 1S Whoop Drone. Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demand. Betafpv always keeps moving forward with passion for breakthrough experiences. Now BETAFPV exclusive designed BT2.0 connector 1S battery has finally come out, which has broken through the bottle-neck of PH2.0 crappy crimped pins.

BT2.0 450mAh 1S 30C Battery (4PCS)

All batteries must be shipped via UPS GROUND shipping method.
BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. 
Specifications

Capacity: 450mAh
Rate: 30C/60C
Voltage: 4.35V
Dimension: 61*15*7.5mm
Connector: Betafpv BT2.0 connector 
Weight: 12.7g(1pcs)



Includes



4x BT2.0 450mAh 1S 30C Battery


Not sure if it's worth switching to BT2.0? Check more from Joshua Bardwell'video- Proof that the BT2.0 connector is better than PH 2.0

As the first 450mAh 1S battery with a BT2.0 connector in the current market, it has an exclusive designed BT2.0 connector, which has broken through the bottle-neck of the PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time, and better performance, just need to simply modify its connector to BT2.0 connector.

BULLET POINT

BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. 
BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with this BT2.0 450mAh 1S battery.
It is perfectly suitable for Emax Tinyhawk, it can provide stable and consistent power, which achieved dynamic balance and longer flight time. Just need to simply modify the PH2.0 connector to the BT2.0 connector.

Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. 
High-end technology to guarantee high quality and consistent performance.

We released the BT2.0-PH2.0 adapter cable, which is convenient to charge BT2.0 battery with a stock PH2.0 charger. Meanwhile, we also release BT2.0 all-in-one battery Tester &amp charger for your need.








BT2.0 CONNECTOR
There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has a much longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.



Here is a Betafpv Lab video to show you the best way of replacing BT2.0 connectors.
 

 





BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. PACKAGE 4 * BT2.0 450mAh 1S 30C Battery SPECIFICATION Item: 1S battery Capacity: 450mAh Rate: 30C/60C Voltage: 4.35V Dimension: 61*15*7.5mm Connector: Betafpv BT2.0 connector Weight: 12.7g(1pcs) Not sure if it's worth switching to BT2.0? Check more from Joshua Bardwell'video- Proof that the BT2.0 connector is better than PH 2.0 As the first 450mAh 1S battery with a BT2.0 connector in the current market, it has an exclusive designed BT2.0 connector, which has broken through the bottle-neck of the PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time, and better performance, just need to simply modify its connector to BT2.0 connector. BULLET POINT BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector. By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with this BT2.0 450mAh 1S battery. It is perfectly suitable for Emax Tinyhawk, it can provide stable and consistent power, which achieved dynamic balance and longer flight time. Just need to simply modify the PH2.0 connector to the BT2.0 connector. Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power. High-end technology to guarantee high quality and consistent performance. We released the BT2.0-PH2.0 adapter cable, which is convenient to charge BT2.0 battery with a stock PH2.0 charger. Meanwhile, we also release BT2.0 all-in-one battery Tester & charger for your need. BT2.0 CONNECTOR There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has a much longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance. Here is a Betafpv Lab video to show you the best way of replacing BT2.0 connectors.

1S 450mAh 30C LiHV Battery with BT2.0 Connector (4pcs)

All batteries must be shipped via UPS GROUND shipping method. BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.  Specifications Capacity: 450mAh Rate: 30C/60C Voltage: 4.35V Dimension: 61*15*7.5mm Connector: Betafpv BT2.0 connector  Weight: 12.7g(1pcs) Includes 4x BT2.0 450mAh 1S 30C Battery Not sure if it's worth switching to BT2.0? Check more from Joshua Bardwell'video- Proof that the BT2.0 connector is better than PH 2.0 As the first 450mAh 1S battery with a BT2.0 connector in the current market, it has an exclusive designed BT2.0 connector, which has broken through the bottle-neck of the PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time, and better performance, just need to simply modify its connector to BT2.0 connector. BULLET POINT BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana

BetaFPV 300mAh 1S 3.8V 30C LiHV Whoop/Micro Battery - BT2.0

<p><span style="color: #ff2a00"><strong>All batteries must be shipped by a ground shipping method. Updated packaging.</strong></span></p>
<p>BT2.0 Connector - the most significant revolution in 1S Whoop Drone. <br><br>Since February 2019, we've got some feedback on Facebook about how eager they need the high-quality solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demands. BETAFPV always keeps moving forward with a passion for breakthrough experiences.<br><br>After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with a BT2.0 connector in the current market, it has an exclusively designed BT2.0 connector, which has broken through the bottle-neck of the PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time, and better performance, just need to simply modify its connector to BT2.0 connector.<br><br>We also carry<span> </span><a title="betafpv 1s 260mah lihc battery for Sale at RaceDayQuads" href="https://www.racedayquads.com/products/betafpv-3-8v-1s-260mah-30c-lihv-whoop-micro-battery-8-pack-bt2-0" target="_blank">260mAh</a>, <a title="betafpv 1s 300 lihv battery for Sale at RaceDayQuads" href="https://www.racedayquads.com/products/betafpv-3-8v-1s-300mah-30c-lihv-whoop-micro-battery-8-pack-bt2-0" target="_blank">300mAh</a><span> </span>and<span> </span><a title="betafpv 1s 450 bt2.0 lipo for Sale at RaceDayQuads" href="https://www.racedayquads.com/products/betafpv-3-8v-1s-450mah-30c-lihv-whoop-micro-battery-4-pack-bt2-0" target="_blank">450mAh</a><span> </span>1S BT2.0 packs! <br></p>
<p>Check out <a title="all 1s batteries for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/1s-batteries" target="_blank">all our 1S batteries</a> and <span>all our </span><a title="all betafpv products for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/betafpv-products" target="_blank">BetaFPV gear</a></p>
<p><iframe width="560" height="315" src="https://www.youtube.com/embed/Xt0yARay6nw" title="YouTube video player" frameborder="0" allow="accelerometer autoplay clipboard-write encrypted-media gyroscope picture-in-picture" allowfullscreen=""></iframe><br></p>
<h3>Features</h3>
<ul>
<li>BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to a 1.0mm banana connector and increasing the cross-sectional area of the 1.0mm banana connector.<br>
</li>
<li>BT2.0 300mAh 1S 30C Battery supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. With this BT2.0 300mAh 1S battery, all 1S brushless drones will gain powerful and perfect performance.<br>
</li>
<li>By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without the disturbance of low voltage warnings. <br>
</li>
<li>Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable and can discharge more currents in the same capacity and provide far more power. You can get a 2mins flight time in full throttle on Meteor65.</li>
</ul>
<p class="origin-content"><strong><span class="keyword"><img alt="" src="https://cdn.shopify.com/s/files/1/1285/4651/files/inline1_4bb129fe-e26a-4cbd-80c6-f02ab73f708b.jpg?v=1672765121"></span></strong></p>
<ul></ul>
<h3>Specifications</h3>
<ul>
<li>Item: 1S battery</li>
<li><span>Capacity: 300mAh</span></li>
<li>Rate: 30C/60C</li>
<li>Voltage: 4.35V</li>
<li>Dimension:<span> </span><span>67.3x11.8x6.1mm</span>
</li>
<li>Connector: Betafpv BT2.0 connector </li>
<li>Weight: 8.28g(1pcs)</li>
</ul>
<ul></ul>
<h3>BT2.0 Connector</h3>
<p><span>There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 260mAh battery. The discharge current is 9A in this testing. You could see that it has longer discharge time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.</span></p>
<p><span><img alt="" src="https://cdn.shopify.com/s/files/1/1778/6615/files/de2b4142628b3df7c9fe4454e0573eb7_732e69f2-5c1d-4f98-af55-5bdebba3d908_1024x1024.jpg?v=1578381080">Here is Betafpv Lab video to show you the best way to replace PH2.0 to BT2.0 connectors.</span></p>
<div>
<h3 class="video-wrapper"><iframe src="https://www.youtube.com/embed/JRU9sDiKaDo" height="315" width="560" allowfullscreen="" allow="accelerometer autoplay encrypted-media gyroscope picture-in-picture" frameborder="0"></iframe></h3>
<h3>Includes<br>
</h3>
</div>
<ul>
<li>
<p>8x BT2.0 300mAh 1S 30C Battery</p>
</li>
</ul>

All batteries must be shipped by a ground shipping method. Updated packaging. BT2.0 Connector - the most significant revolution in 1S Whoop Drone. Since February 2019, we've got some feedback on Facebook about how eager they need the high-quality solid pins connector on 1S whoop drone. So we started our long-term inves

BetaFPV 3.8V 1S 300mAh 30C LiHV Whoop/Micro Battery 8 Pack - BT2.0

BT2.0 Connector - the most significant revolution in 1S Whoop Drone. 
Not sure if it's worth switching to BT2.0 connector? Check more from Joshua'video- Proof that the BT2.0 connector is better than PH 2.0

Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demands. Betafpv always keeps moving forward with a passion for breakthrough experiences.
Now Betafpv exclusive designed BT2.0 connector 1S battery has finally come out, which has broken through the bottle-neck of PH2.0 crappy crimped pins. Meanwhile, we provide 200 sets of BT2.0 300mah 1S batteries (2pcs) and a certain number of BT2.0 connectors as a free gift for everybody. Click here to grab the BT2.0 battery/connector. 

Bullet Point

BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 300mAh 1S 30C Battery supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. With this BT2.0 300mAh 1S battery, all 1S brushless drones will gain powerful and perfect performance.
By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without the disturbance of low voltage warnings. 
Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable and can discharge more currents in the same capacity and provide far more power. You can get a 2mins flight time in full throttle on Meteor65.

SPECIFICATION

Item: 1S battery
Capacity: 300mAh
Rate: 30C/60C
Voltage: 4.35V
Dimension: 67.3*11.8*6.1mm

Connector: Betafpv BT2.0 connector 
Weight: 8.28g(1pcs)






BT2.0 Connector
There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time ( about 2minutes) and a 0.2v improvement in voltage sag with BT2.0 connector.

Much more choices of BT2.0 series accessories.  
We know some pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 Power whoop connectors for those people who wanna convert the PH2.0 connector to BT2.0 connector. 

BT2.0 Connectors (10pcs)
BT2.0 1S Whoop Cable Pigtail
BT2.0-PH2.0 Adapter Cable

Highly recommend the below products with BT2.0 connectors or cables. BETAFPV will collaborate closely with more brand manufacturers in the future, in order to bring better service and experience to customers.

BT2.0 450mAh 1S Battery
BT2.0 300mAh 1S Battery

BT2.0 Battery Charger and Voltage Tester 
BT2.0 Series Quadcopters
6 Ports 1S Battery Charger &amp Adapter
Other Brand Chargers &amp Batteries with BT2.0 port




Difference between BT2.0 battery and PH2.0 battery
As we can see, the BT2.0 300mah 1S battery is adopted with the 1.0mm banana connector while the PH2.0 battery is the crimped pins. Also, it is a bit longer than the original PH2.0 battery, which is marked BT2.0 on the label.


Here is a Betafpv Lab video to show you the best way of replacing BT2.0 connectors.




PACKAGE


8 * BT2.0 300mAh 1S 30C Battery


 Note: 1. Some countries are not available to ship batteries only without purchasing of whoop drone.  2. The ETA of the battery parcel is slower than the parcel that excludes batteries. Please take a look at our Shipping Information Page.


BT2.0 Connector - the most significant revolution in 1S Whoop Drone. Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demand. Betafpv always keeps moving forward with passion for breakthrough experiences. Now Betafpv exclusive designed BT2.0 connector 1S battery has finally come out, which has broken through the bottle-neck of PH2.0 crappy crimped pins. Meanwhile, we provide 200 sets of BT2.0 300mah 1S battery(2pcs) and a certain number of BT2.0 connectors as a free gift for everybody.

BT2.0 300mAh 1S 30C Battery (8PCS)

BetaFPV 300mAh 2S 45C Lipo Battery

300mAh 2S battery owns a more powerful performance with stronger mobility and higher sensitivity under high-speed flight. Moreover, it is suitable for Beta75X, Mobula 7 and Eachine Trashcan 2S brushless Whoop drone.  
Note: 1. Some countries are not available to ship batteries only without purchasing of whoop drone.  2. The ETA of the battery parcel is slower than the parcel that excludes batteries. Please take a look at our Shipping Information Page.






















Specification

Item: 300mAh 2S 45C Battery
Weight: 18.4g
Size: 45*17*12 mm
Connector: XT30 with 18AWG silicone wire
Pack: 2S 7.4V
Rate: 45C/90C

Comparison
Compare to 350mAh 2S battery, this 300mAh 2S battery is 3g lighter weight while improving to 45C, that would be the best recommendation for using on Beta75X.

The discharge current is 11A in this testing.

Connector and Cable 
    
Size


Package

2 * BETAFPV 300mAh 2S 7.4V Lipo Battery (XT30)

FAQ
1. How to maximize battery Life? Please check this article.

300mAh 2S battery owns a more powerful performance with stronger mobility and higher sensitivity under high-speed flight. Moreover, it is suitable for Beta75X, Mobula 7 and Eachine Trashcan 2S brushless Whoop drone.   Note: 1. Some countries are not available to ship batteries only without purchasing of whoop drone.  2

300mAh 2S 45C Lipo Battery (2PCS)

Compare to 350mAh 2S battery, this 300mAh 2S battery is 3g lighter weight while improving to 45C, that would be the best recommendation for using on Beta75X.

The BETAFPV 300mAh 2S battery provides a strong performance under high-speed flight and is compact, made to fit small 2S brushless whoops. Perfect for the Beta75X, Mobula 7 and Eachine Trashcan 2S brushless Whoop drones. 

Specification


BETAFPV 300mAh 2S 45C Lipo Battery (2PCS)

Tattu

Tattu FunFly 1550mAh 4S 14.8V 100C Lipo Battery - XT60

Tattu FunFly 1550mAh 4s 100C Lipo Battery

Funfly, the new lovely member of Tattu family, was specially designed for daily training and freestyle. Are you tired of the pressures of the racing scene? All you need is to find a nice quiet spot at a local park or an open area to start your traini

All batteries must be shipped by a ground shipping method.
The Fun Fly series from Tattu features batteries that don't break the bank, but still deliver exceptional power that your quad needs! Try them on your multirotor today and we know you will love them!
FunFly Features

Affordable pricing!
Greater capacity than comparable size packs.
High discharge rate of 100C.

Specifications

Capacity: 1550mAh
Configuration: 4S1P / 14.8V / 4 Cells
Discharge Rate: 100C
Max Burst Discharge Rate: 200C
Net Weight(±20g): 149.5g/unit
Dimensions: 73mm Length x 35mm Width x 28.5mm Height
Charge Plug: JST-XHR
Discharge Plug: XT-60


All batteries must be shipped by a ground shipping method. The Fun Fly series from Tattu features batteries that don't break the bank, but still deliver exceptional power that your quad needs! Try them on your multirotor today and we know you will love them! FunFly Features Affordable pricing! Greater capacity than com

FunFly 4S 1550mAh 100C LiPo Battery with XT60 Connector

TATTU

<p><span style="color: #ff0000" data-mce-style="color: #ff0000"><strong>All batteries must be shipped by a ground shipping method.</strong></span></p>
<p>The Tattu FunFly Battery is an affordable yet highly capable battery, perfect for practicing. When practicing your piloting skills dont bust up your expensive batteries. use a FunFly until you're comfortable with your skills. </p>
<p>Browse our <a href="https://www.racedayquads.com/collections/4s-batteries" title="all 4s lipos for Sale at RaceDayQuads" data-mce-href="https://www.racedayquads.com/collections/4s-batteries" target="_blank">4S LiPos</a>, and the <a href="https://www.racedayquads.com/collections/tattu-products" title="all tattu FPV Products for Sale at RaceDayQuads" data-mce-href="https://www.racedayquads.com/collections/tattu-products" target="_blank">Tattu selection</a>!</p>
<h3><strong>Features</strong></h3>
<ul>
<li>Stable automatic stacking technology enables single-cell capacities of 1550mAh.</li>
<li>Higher capacity than comparable size packs</li>
<li>Local after-sales service (located in Dublin, CA)</li>
<li>The high rate of 100C, Max Burst discharge Rate 200C.</li>
</ul>
<h3><strong>Specifications</strong></h3>
<ul>
<li>Minimum Capacity: 1550mAh</li>
<li>Configuration: 4S1P / 14.8V / 4 Cells</li>
<li>Discharge Rate: 100C</li>
<li>Max Burst Discharge Rate: 200C</li>
<li>Net Weight(±20g): 178g/unit</li>
<li>Dimensions: 72mm Length x 35mm Width x 36mm Height </li>
<li>Charge Plug: JST-XHR</li>
<li>Discharge Plug: XT-60</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x Tattu FunFly 14.8V 4S 1550mAh 100C LiPo Battery - XT60</li>
</ul>

All batteries must be shipped by a ground shipping method. The Tattu FunFly Battery is an affordable yet highly capable battery, perfect for practicing. When practicing your piloting skills dont bust up your expensive batteries. use a FunFly until you're comfortable with your skills.  Browse our 4S LiPos, and the Tattu

Tattu FunFly 14.8V 4S 1550mAh 100C LiPo Battery - XT60


About this product


Funfly, the new lovely member of Tattu family, was specially designed for daily training and freestyle. Are you tired of the pressures of the racing scene? All you need is to find a nice quiet spot at a local park or an open area to start your training. With its stable performance, you can concentrate on your flips, rolls and power loops and perfect your flowing freestyle lines.
The Tattu Funfly series provides Tattu quality lipos at a new affordable price point.
Features

Stable automatic stacking technology enables single-cell capacities of 1550mAh.
Higher capacity than comparable size packs
The high rate of 100C, Max Burst discharge Rate 200C.

Specifications

Minimum Capacity: 1550mAh
Configuration: 4S1P / 14.8V / 4 Cells
Discharge Rate: 100C
Max Burst Discharge Rate: 200C
Net Weight(±20g): 178g/unit
Dimensions: 72mm Length x 35mm Width x 36mm Height 
Charge Plug: JST-XHR
Discharge Plug: XT-60

Includes

1x Lipo Battery




No Air Shipping
Please note that shipping regulations have recently changed for batteries. We are no longer able to ship lithium polymer batteries via any Air shipping method. This includes all international destinations outside the USA. In the USA, you will only be presented with ground-based shipping options if your order contains a lipo battery. If you need to receive your order quickly and would like to ship with one-day or two-day shipping options, consider splitting your order up into an order of only batteries (shipping ground) and everything else.
Due to IATA shipping regulations, batteries shipping AIR must have a charge of less than 30%. A lithium polymer battery which stays in this state for long periods of time will become damaged. For this reason, Drone Racing Parts does not ship batteries using Air shipping.




About this product Funfly, the new lovely member of Tattu family, was specially designed for daily training and freestyle. Are you tired of the pressures of the racing scene? All you need is to find a nice quiet spot at a local park or an open area to start your training. With its stable performance, you can concentrat

Love the Tattu quality but you're looking for a more budget friendly packs for your practice sessions? No need to look at other brands, Tattu now offeres the Funfly line which comes at an affordable price compared to their premium R-Line packs with same quality that you always expect from them. Funfly, the new lovely m

Tattu FunFly 1550mAh 100C 14.8V 4S1P lipo battery pack with XT60 Plug for Practice

Tattu FunFly 1300mAh 6S 22.2V 100C Lipo Battery - XT60

Tattu FunFly 1300mAh 6S1P 100C Lipo Battery 

Funfly, the new lovely member of the Tattu family, was specially designed for daily training and freestyle. Are you tired of the pressures of the racing scene? All you need is to find a nice quiet spot at a local park or an open area to start your tr

<p><span style="color: #ff0000"><strong>All batteries must be shipped by a ground shipping method.</strong></span></p>
<p>The FunFly Battery by Tattu is an affordable yet capable battery, best used in practice races. </p>
<p><strong>Funfly</strong>, the new lovely member of Tattu family, specially designed for daily training and freestyle. Are you tired of the pressures of the racing scene? All you need is to find a nice quiet spot at a local park or any open area to start your training. With its stable performance, you can concentrate on your flips, rolls and power loops and perfect your flowing freestyle lines.</p>
<p>Check out<span> </span><a href="https://www.racedayquads.com/collections/6s-batteries" target="_blank" title="all 6s lipos for Sale at RaceDayQuads" rel="noopener noreferrer">all our 6S LiPos</a>, and our entire<span> </span><a href="https://www.racedayquads.com/collections/tattu-products" target="_blank" title="all tattu FPV Products for Sale at RaceDayQuads" rel="noopener noreferrer">Tattu selection</a>!</p>
<h3>Features</h3>
<ul>
<li>
<span>Stable automatic stacking technology enables </span>single-cell<span> capacities of 1300mAh.</span>
</li>
<li><span>Higher capacity than comparable size packs</span></li>
<li><span>Local after-sales service(located in Dublin, CA)</span></li>
<li>The high<span> rate of 100C, Max Burst discharge Rate 200C.</span>
</li>
</ul>
<h3><strong>Specifications</strong></h3>
<ul>
<li>Minimum Capacity: 1300mAh</li>
<li>Configuration: 6S1P / 22.2V / 6 Cells</li>
<li>Discharge Rate: 100C</li>
<li>Max Burst Discharge Rate: 200C</li>
<li>Net Weight(±20g): 225g/unit</li>
<li>Dimensions: 74mm Length x 35mm Width x 45mm Height</li>
<li>Charge Plug: JST-XHR-7P</li>
<li>Discharge Plug: XT-60</li>
</ul>
<ul></ul>
<p><span><iframe src="https://www.youtube.com/embed/y9286iSQzD8" height="385" width="640"></iframe></span></p>
<h3><span>Includes</span></h3>
<ul>
<li><span>1x Tattu FunFly 22.2V 6S 1300mAh 100C LiPo Battery - XT60</span></li>
</ul>

All batteries must be shipped by a ground shipping method. The FunFly Battery by Tattu is an affordable yet capable battery, best used in practice races.  Funfly, the new lovely member of Tattu family, specially designed for daily training and freestyle. Are you tired of the pressures of the racing scene? All you need 

Tattu FunFly 22.2V 6S 1300mAh 100C LiPo Battery - XT60


About this product


Funfly, the new lovely member of the Tattu family, was specially designed for daily training and freestyle. Are you tired of the pressures of the racing scene? All you need is to find a nice quiet spot at a local park or an open area to start your training. With its stable performance, you can concentrate on your flips, rolls and power loops and perfect your flowing freestyle lines.
The Tattu Funfly series provides Tattu quality Lipos at a new affordable price point.
Features

Stable automatic stacking technology enables single-cell capacities of 1300mAh.
Higher capacity than comparable size packs
Local after-sales service(located in Dublin, CA)
The high rate of 100C, Max Burst discharge Rate 200C.

Specifications

Minimum Capacity: 1300mAh
Configuration: 6S1P / 22.2V / 6 Cells
Discharge Rate: 100C
Max Burst Discharge Rate: 200C
Net Weight(±20g): 225g/unit
Dimensions: 74mm Length x 35mm Width x 45mm Height
Charge Plug: JST-XHR-7P
Discharge Plug: XT-60

Includes

1 x Tattu FunFly 1300mAh 6S1P 100C Lipo Battery 




No Air Shipping
Please note that shipping regulations have recently changed for batteries. We are no longer able to ship lithium polymer batteries via any Air shipping method. This includes all international destinations outside the USA. In the USA, you will only be presented with ground-based shipping options if your order contains a lipo battery. If you need to receive your order quickly and would like to ship with one-day or two-day shipping options, consider splitting your order up into an order of only batteries (shipping ground) and everything else.
Due to IATA shipping regulations, batteries shipping AIR must have a charge of less than 30%. A lithium polymer battery which stays in this state for long periods of time will become damaged. For this reason, Drone Racing Parts does not ship batteries using Air shipping.




About this product Funfly, the new lovely member of the Tattu family, was specially designed for daily training and freestyle. Are you tired of the pressures of the racing scene? All you need is to find a nice quiet spot at a local park or an open area to start your training. With its stable performance, you can concen

Tattu FunFly 1300mAh 6S1P 100C Lipo Battery

Features: - Stable automatic stacking technology enables single-cell capacities of 1300mAh.- Higher capacity than comparable size packs- Local after-sales service(located in Dublin, CA)- The high rate of 100C, Max Burst discharge Rate 200C. Specifications: - Minimum Capacity: 1300mAh- Configuration: 6S1P / 22.2V / 6 Ce

Tattu FunFly 1300mAh 100C 22.2V 6S1P Lipo Battery Pack

Tattu 850mAh 4S 14.8V 75C Lipo Battery - XT30

All Tattu LiPos are packed with vibration-proof & fire-proof material and our luxury battery box ensuring you get your battery in perfect condition.

These 850mah 4S lipo batteries deliver full capacity and discharge rate. It is very compact in size and very light in weight. Works perfect with your Multirotor FPV from size 100 to 180. The 75C high C rate gives you enough power under load.
Feature

Tattu 850mAh 14.8V 75C 4S1P Lipo Battery Pack (XT30)

These 850mah 4S lipo batteries deliver full capacity and discharge rate. It is very compact in size and very light in weight. Works perfect with your Multirotor FPV from size 100 to 180. The 75C high C rate gives you enough power under load. Also available with higher discharge rate R-Line versionCheck out all our 4S b

Tattu 850mAh 14.8V 75C 4S1P Lipo Battery Pack with XT30 plug


Tattu 14.8V 75C 4S 850mAh Lipo Battery Pack with XT30 Plug  provide high quality, reliable power for 150mm, 180mm sizes FPV Quadcopters.
 
Features:
- Remarkable stacking technology enables single-cell capacities of 850mAh.- High discharge performance and high energy density.- Superior Japan and Korea Lithium Polymer raw materials.- Standard Balance Plug + Equipped with industry-standard XT-30 plug.
 
Specifications:
- Capacity: 850mAh- Voltage: 14.8V / 4S / 4 Cell- Discharge Rate: 75C- Max Burst Discharge Rate: 150C- Weight: 107g- Size: 60mm x 30mm x 30.5mm (L x W x H)- Connector Type: XT-30
 

About Tattu Lipo battery:
All Tattu LiPos are packed with vibration-proof &amp fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. An automatic procedure &amp Computer system battery cell matching process ensures the batteries stability and quality. Different from the original Gens Ace series, TATTU is specialized for the UAV &amp UAS market, with their industrial quality (since Gens Ace is based on the Hobby area), their slogan "less is more", "more" means more flight time, more enjoyment, and more satisfaction, and "less" means less weight, simple design. Tattu always develops their products according to these 2 directions giving you a high-quality battery.



Tattu 14.8V 75C 4S 850mAh Lipo Battery Pack with XT30 Plug  provide high quality, reliable power for 150mm, 180mm sizes FPV Quadcopters.   Features: - Remarkable stacking technology enables single-cell capacities of 850mAh.- High discharge performance and high energy density.- Superior Japan and Korea Lithium Polymer r

Tattu 850mAh 14.8V 75C 4S1P Lipo Battery Pack With XT30 Plug

<p><span style="color: #ff0000"><strong>All batteries must be shipped by a ground shipping method.</strong></span></p>
<p>These 850mah 4S lipo batteries deliver full capacity and discharge rate. It is very compact in size and very light in weight. Works perfect with your Multirotor FPV from size 100 to 180. The 75C high C rate gives you enough power under load.</p>
<p>Check out<span> all our </span><a title="all 3s batteries for Sale at RaceDayQuads" href="https://www.racedayquads.com/collections/4s-batteries" data-mce-href="https://www.racedayquads.com/collections/4s-batteries" target="_blank">4S LiPos</a> <span>and all our </span><a title="all tattu products for sale at racedayquads" href="https://www.racedayquads.com/collections/tattu-products" target="_blank" data-mce-href="https://www.racedayquads.com/collections/tattu-products">Tattu products</a><span>!</span></p>
<h3>Features<br>
</h3>
<ul>
<li>Remarkable stacking technology enables single cell capacities of 850mAh.</li>
<li>High discharge performance and high energy density.</li>
<li>Superior Japan and Korea Lithium Polymer raw materials.</li>
</ul>
<h3><strong><span>Specifications</span></strong></h3>
<ul>
<li>Minimum Capacity: 850mAh</li>
<li>Configuration: 4S1P / 14.8V / 4Cell</li>
<li>Discharge Rate: 75C</li>
<li>Max Burst discharge Rate: 150C</li>
<li>Net Weight(±20g): 103</li>
<li>Dimensions: 61mm x 30.5mm x 30.5mm (L x W x H)</li>
<li>Charge Plug: JST-XHR-5P</li>
<li>Discharge Plug: XT-30</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x Tattu 14.8V 4S 850mAh 75C LiPo Micro Battery - XT30</li>
</ul>
<p> </p>

All batteries must be shipped by a ground shipping method. These 850mah 4S lipo batteries deliver full capacity and discharge rate. It is very compact in size and very light in weight. Works perfect with your Multirotor FPV from size 100 to 180. The 75C high C rate gives you enough power under load. Check out all our 4

Tattu 14.8V 4S 850mAh 75C LiPo Micro Battery - XT30

All batteries must be shipped by a ground shipping method.
This is the XT30 version. XT60 available here.
What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the consumer version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. Tattu's R-Line is made to devour the racetrack and power your amp hungry quad, giving you the edge in competition.
Features


 Remarkable stacking technology enables single-cell capacities of 850mAh.

High discharge performance and high energy density.
Superior Japan and Korea Lithium Polymer raw materials.
Standard Balance Plug + Equipped with industry-standard XT-30 plug.

Specifications

Capacity: 850mAh
Voltage: 14.8V / 4S / 4 Cell
Discharge Rate: 75C
Max Burst Discharge Rate: 150C
Weight: 107g
Size: 60mm x 30mm x 30.5mm (L x W x H)
Connector Type: XT-30

Includes

1x TATTU 850mAh 14.8V 75C 4S1P Lipo Battery Pack With XT30 Plug


All batteries must be shipped by a ground shipping method. This is the XT30 version. XT60 available here. What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the consumer version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's go

4S 850mAh 75C LiPo Battery with XT30 Connector

All batteries must be shipped by a ground shipping method. This is the XT30 version. XT60 available here. What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the consumer version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. Tattu's R-Line is made to devour the racetrack and power your amp hungry quad, giving you the edge in competition. Features Remarkable stacking technology enables single-cell capacities of 850mAh. High discharge performance and high energy density. Superior Japan and Korea Lithium Polymer raw materials. Standard Balance Plug + Equipped with industry-standard XT-30 plug. Specifications Capacity: 850mAh Voltage: 14.8V / 4S / 4 Cell Discharge Rate: 75C Max Burst Discharge Rate: 150C Weight: 107g Size: 60mm x 30mm x 30.5mm (L x W x

Tattu 850mAh 4S 14.8V 75C Lipo Battery - XT60

Gens Ace / Tattu 

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

Tattu 850mAh 4S 75C Lipo Pack - XT60 - RMRC

Tattu 850mAh 4S 75C Lipo Pack - XT60


Tattu 14.8V 75C 4S 850mAh Lipo Battery Pack with XT60 Plug  provide high quality, reliable power for 150mm, 180mm sizes FPV Quadcopters.
 
Features:
- Remarkable stacking technology enables single-cell capacities of 850mAh.- High discharge performance and high energy density.- Superior Japan and Korea Lithium Polymer raw materials.- Standard Balance Plug + Equipped with industry-standard XT-60 plug.
 
Specifications:
- Capacity: 850mAh- Voltage: 14.8V / 4S / 4 Cell- Discharge Rate: 75C- Max Burst Discharge Rate: 150C- Weight: 107g- Size: 60mm x 30mm x 30.5mm (L x W x H)- Connector Type: XT-60
 

About Tattu Lipo battery:
All Tattu LiPos are packed with vibration-proof &amp fire-proof material and our luxury battery box ensuring you get your battery in perfect condition. An automatic procedure &amp Computer system battery cell matching process ensures the batteries stability and quality. Different from the original Gens Ace series, TATTU is specialized for the UAV &amp UAS market, with their industrial quality (since Gens Ace is based on the Hobby area), their slogan "less is more", "more" means more flight time, more enjoyment, and more satisfaction, and "less" means less weight, simple design. Tattu always develops their products according to these 2 directions giving you a high-quality battery.



Tattu 14.8V 75C 4S 850mAh Lipo Battery Pack with XT60 Plug  provide high quality, reliable power for 150mm, 180mm sizes FPV Quadcopters.   Features: - Remarkable stacking technology enables single-cell capacities of 850mAh.- High discharge performance and high energy density.- Superior Japan and Korea Lithium Polymer r

Tattu 850mAh 14.8V 75C 4S1P Lipo Battery Pack With XT60 Plug

Tattu 850mAh 14.8V 75C 4S1P Lipo Battery Pack (XT60)

Tattu R-Line Version 4.0 1550mAh 4S 130C Lipo Battery - XT60

The Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series. 

The Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.
Features  

Tattu R-Line Version 4.0 1550mAh 4S 130C LiPo Battery - XT60


Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.
What is R-Line?
R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries.There are different R-Line versions for the needs of different FPV racing competitions.
Features:

High quality, reliable power
Stable automatic stacking technology enables single-cell capacities of 1550mAh
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect
Local after-sales service(located in Dublin, CA)

Specifications:

Minimum Capacity: 1550mAh
Configuration: 4S1P / 14.8V / 4Cells
Discharge Rate: 130C
Max Burst Discharge Rate: 240C
Net Weight(±10g): 167g
Dimensions: 76mm x 38mm x 30mm (L x W x H)
Charge Plug: JST-XHR-5P
Discharge Plug: XT60

Our Advantage:
1. Your orders will be dispatched via FedEx or UPS from the USA directly.2. Fast shipping and excellent local after-sale service guaranteed in the USA.3. Service-priority in the online shop, like the long warranty period and the lower price for buyers.4. Energy Density: Specially adapted to each UAV type and RC car/boat/helicopter type. Very High according to capacity/weight. In fact, we are specialists in High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 130C. Another technology is our batteries are able to be stably discharged simultaneously.5. Low IR: Provides stable voltage until the end of your mission.6. Safety: Tattu &amp Gens ace and its' partners fulfill the ISO9001, ISO14001 standards.7. See the battery instruction to the link: Lipo Battery Guide
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.



Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races. What is R-Line? R-Line is a brand new product line specifically designed for professional FP

Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P Lipo Battery Pack With XT60 Plug

Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P Lipo Battery Pack Wit

Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.

Tattu R-Line V4.0 1550mAh 14.8V 130C 4S1P Lipo Battery XT60 - RMRC

Tattu R-Line V4.0 1550mAh 14.8V 130C 4S1P Lipo Battery XT60

All batteries must be shipped via UPS GROUND shipping method.
Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P Lipo Battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-Line 4.0 definitely dominate all your races.
What is R-Line?
R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries.There are different R-Line versions for the needs of different FPV racing competitions.
Features:

High quality, reliable power
Stable automatic stacking technology enables single-cell capacities of 1550mAh
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect
Local after-sales service(located in Dublin, CA)

Specifications:

Minimum Capacity: 1550mAh
Configuration: 4S1P / 14.8V / 4Cells
Discharge Rate: 130C
Max Burst Discharge Rate: 240C
Net Weight(±10g): 167g
Dimensions: 76mm x 38mm x 30mm (L x W x H)
Charge Plug: JST-XHR-5P
Discharge Plug: XT60


All batteries must be shipped via UPS GROUND shipping method. Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P Lipo Battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-Line 4.0 definitely dominate all your races. What is R-Line? R-Line is a b

R-Line Version 4.0 4S 1550mAh 130C LiPo Battery with XT60 Connector

All batteries must be shipped via UPS GROUND shipping method. Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P Lipo Battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-Line 4.0 definitely dominate all your races. What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries.There are different R-Line versions for the needs of different FPV racing competitions. Features: High quality, reliable power Stable automatic stacking technology enables single-cell capacities of 1550mAh Higher capacity than comparable size packs Very high C

Tattu R-Line Version 4.0 1550mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series in 2021.  What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu bran

Tattu R-line Version 4.0 1550mah 14.8V 4S 130C Lipo Battery - XT60

Tattu R-Line Version 4.0 1550mAh 6S 130C Lipo Battery - XT60


Tattu R-Line Version 4.0 1550mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.
What is R-Line?
R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Top pilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Top pilot batteries.There are different R-Line versions for the needs of different FPV racing competitions.
Features:

High quality, reliable power
Stable automatic stacking technology enables single-cell capacities of 1550mAh
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect
Local after-sales service(located in Dublin, CA)

Specifications:

Minimum Capacity: 1550mAh
Configuration: 6S1P / 22.2V / 6 Cells
Discharge Rate: 130C
Max Burst Discharge Rate: 240C
Net Weight(±20g): 242g
Dimensions:76mm x 38mm x 44mm (L x W x H)
Charge Plug:JST-XHR-7P
Discharge Plug: XT60



Includes

1x Tattu R-Line Version 4.0 22.2V 6S 1550mAh 130C LiPo Battery - XT60



Tattu R-Line Version 4.0 1550mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races. What is R-Line? R-Line is a brand new product line specifically designed for professional FP

Tattu R-Line Version 4.0 1550mAh 22.2V 130C 6S1P LiPo battery

Tattu R-Line Version 4.0 1550mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021.  What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu bran

Tattu R-line Version 4.0 1550mah 22.2V 130C 6S1P Lipo Battery - XT60

The Tattu R-Line Version 4.0 1550mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.

The Tattu R-Line Version 4.0 1550mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominates all your races.
Featur

Tattu R-Line Version 4.0 1550mAh 6S 130C LiPo Battery - XT60

Tattu R-Line Version 4.0 1300mAh 6S 22.2V 130C Lipo Battery - XT60

<p><span style="color: #ff0000"><strong>All batteries must be shipped by a ground shipping method.</strong></span></p>
<p>Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2020. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.</p>
<p>What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions.</p>
<p>Check out our other <a href="https://www.racedayquads.com/collections/6s-batteries" title="6s rc fpv lipos battery packs for sale at racedayquads" target="_blank">6S packs</a> and all our <a href="https://www.racedayquads.com/collections/tattu-products" title="tattu fpv lipo battery packs for sale at racedayquads" target="_blank">Tattu products</a>!</p>
<h3>Features </h3>
<ul>
<li>High quality, reliable power</li>
<li>Stable automatic stacking technology enables single-cell capacities of 1800mAh</li>
<li>Higher capacity than comparable size packs</li>
<li>Very high C rate. Designed for professional FPV racing</li>
<li>No memory effect.</li>
<li>Local after-sales service(located in Dublin, CA)</li>
</ul>
<h3>Specifications</h3>
<ul>
<li>Minimum Capacity: 1300mAh</li>
<li>Configuration: 6S1P / 22.2V / 6 Cells</li>
<li>Discharge Rate: 130C</li>
<li>Max Burst Discharge Rate: 260C</li>
<li>Charge Plug: JST-XHR</li>
<li>Discharge Plug: XT60</li>
<li>Dimensions:78mm x 39mm x 38mm (L x W x H)</li>
<li>Net Weight(±20g): 200g</li>
</ul>
<h3>Includes</h3>
<ul>
<li>1x Tattu R-Line Version 4.0 22.2V 6S 1300mAh 130C LiPo Battery - XT60</li>
</ul>

Don't miss the Tattu R-Line Version 4.0 22.2V 6S 1300mAh 130C LiPo Battery with XT60 connector from RaceDayQuads! Get a professional FPV racing battery today!

Tattu R-Line Version 4.0 22.2V 6S 1300mAh 130C LiPo Battery - XT60

XT60 Tattu R-Line Version 4.0 22.2V 6S 1300mAh 130C LiPo Battery for Sale


What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Top pilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Top pilot batteries.?There are different R-Line versions for the needs of different FPV racing competitions.

FEATURES:

High quality, reliable power
Stable automatic stacking technology enables single-cell capacities of 1300mAh
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect.

Specifications:

Minimum Capacity: 1300mAh
Configuration: 6S1P / 22.2V / 6 Cells
Discharge Rate: 130C
Max Burst Discharge Rate: 260C
Net Weight(±20g): 200g
Dimensions:78mm x 39mm x 38mm (L x W x H)
Charge Plug: JST-XHR
Discharge Plug: XT60


PACKAGE INCLUDES:


1 x Tattu R-line Version 4.0 1300mah 6s 130c Lipo Battery Pack


What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Top pilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than 

Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P LiPo battery

Tattu R-Line Version 4.0 1300mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.

Tattu R-Line Version 4.0 1300mAh 14.8V 130C 4S1P Lipo XT60 - RMRC

Tattu R-Line Version 4.0 1300mAh 14.8V 130C 4S1P Lipo XT60

The Tattu R-Line Version 4.0 1300mAh 6S1P 130C Lipo Battery

Tattu R-Line Version 4.0 1300mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races.
What i

Tattu R-Line Version 4.0 1300mAh 6S1P 130C Lipo Battery

All batteries must be shipped by a ground shipping method.
Tattu R-Line Version 4.0 1300mAh 22.2V 120C 6S1P LiPo battery pack is the updated version of R-Line series in 2019. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V3 definitely dominate all your races.
What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions.
Features 

High quality, reliable power
Stable automatic stacking technology enables single-cell capacities of 1800mAh
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect.
Local after-sales service(located in Dublin, CA)

Specifications

Minimum Capacity: 1300mAh
Configuration: 6S1P / 22.2V / 6 Cells
Discharge Rate: 130C
Max Burst Discharge Rate: 260C
Net Weight(±20g): 200g
Dimensions:78mm x 39mm x 38mm (L x W x H)
Charge Plug: JST-XHR
Discharge Plug: XT60


All batteries must be shipped by a ground shipping method. Tattu R-Line Version 4.0 1300mAh 22.2V 120C 6S1P LiPo battery pack is the updated version of R-Line series in 2019. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V3 definitely dominate all your races. What is R-Line? R-Line is a brand

R-Line Version 4.0 6S 1300mAh 130C LiPo Battery with XT60 Connector

All batteries must be shipped by a ground shipping method. Tattu R-Line Version 4.0 1300mAh 22.2V 120C 6S1P LiPo battery pack is the updated version of R-Line series in 2019. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V3 definitely dominate all your races. What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions. Features  High quality, reliable power Stable automatic stacking technology enables single-cell capacities of 1800mAh Higher capacity than comparable size packs

Tattu R-Line Version 1.0 550mAh 2S 95C Lipo Battery







Tattu R-Line 550mAh 7.4V 95C 2S1P Lipo Battery Pack with XT30 plug has full capacity and discharge rate. It is a high discharge rate FPV racing lipo battery. The 95C gives you enough power under load. It is very compact in size and very light in weight. Works perfectly with your Multirotor FPV from size 100 to 180.
Tattu R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Top pilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Top pilot batteries. There are different R-Line versions for the needs of different FPV racing competitions
Features

Remarkable stacking technology enables single-cell capacities of 550mAh.
High discharge performance and high energy density.
Superior Japan and Korea Lithium Polymer raw materials.
Local after-sales service(located in Dublin, CA)

Specifications

Minimum Capacity: 550mAh
Configuration: 2S1P / 7.4V / 2Cells
Discharge Rate: 95C
Max Burst discharge Rate: 190C
Net Weight(±5g): 31.5g
Dimensions: 61mm Length x 19mm Width x 15mm Height
Charge Plug: JST-XHR-3P
Discharge Plug: XT30

Includes

1 x Tattu R-Line Version 1.0 550mAh 2S1P 95C Lipo Battery











Tattu R-Line 550mAh 7.4V 95C 2S1P Lipo Battery Pack with XT30 plug has full capacity and discharge rate. It is a high discharge rate FPV racing lipo battery. The 95C gives you enough power under load. It is very compact in size and very light in weight. Works perfectly with your Multirotor FPV from size 100 to 180. Tat

Tattu R-Line Version 1.0 550mAh 2S1P 95C Lipo Battery

Tattu R-Line 550mAh 7.4V 95C 2S1P Lipo Battery Pack with XT30 plug has full capacity and discharge rate. It is a high discharge rate FPV racing lipo battery.

Tattu R-Line 550mAh 7.4V 95C 2S1P Lipo Battery Pack with XT30 plug has full capacity and discharge rate. It is a high discharge rate FPV racing lipo battery. The 95C gives you enough power under load. It is very compact in size and very light in weig

Tattu R-Line Version 4.0 850mAh 4S 130C Lipo Battery - XT60

Tattu R-Line Version 4.0 850mAh 14.8V 130C 4S1P Lipo Battery Pack with ultra high discharge rate. It&#39s the perfect fit for high end FPV racing and other ultra high performance needs!Tattu R-Line Version 4.0 850mAh14.8V 130C 4S1P LiPo battery pack is the updated version of the R-Line series, new in 2021. What is R-Line?  R-Line is a product line specifically designed for high end FPV racing competitions. It&#39s the newest version of used to be called Toppilot batteries. It&#39s also a subsidiary of the Tattu brand. It has higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any &quotgraphene&quot battery. Generally, R-Line batteries have the same or better specs than the previously popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions.It&#39s perfectly suitable for 2.5, 3, 3.5 Inch sized FPV quads.Specifications:Minimum Capacity: 850mAhConfiguration: 4S1P / 14.8V / 4C...

Ultra high performance for smaller quads, this 130C monster will get you the advantage you need to win the drone races! From the leaders in FPV since 2009, RMRC.  

Tattu R-Line Version 4.0 850mAh 14.8V 130C 4S1P Lipo XT60 - RMRC

Tattu R-Line Version 4.0 850mAh 14.8V 130C 4S1P Lipo XT60

All batteries must be shipped via UPS GROUND shipping method.
The Tattu R-Line Version 4.0 850mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of the R-Line series. With More Punch, Lower Internal Resistance, and Less weight, Tattu R-line V4 definitely dominates all your races.
Features

Very high C rate. Designed for professional FPV racing
Local after-sales service (located in Dublin, CA)
Higher capacity than comparable size packs
Stable automatic stacking technology
High-quality, reliable power

Specifications

Dimensions: 58mm x 29mm x 30mm (L x W x H)
Configuration: 4S1P / 14.8V / 4 Cells
Max Burst Discharge Rate: 260C
Minimum Capacity: 850mAh
Net Weight(±20g): 102g
Charge Plug: JST-XHR
Discharge Rate: 130C
Discharge Plug: XT60

Includes

1x R-Line 4S 850mAh 130C LiPo Battery with XT60 Connector


All batteries must be shipped via UPS GROUND shipping method. The Tattu R-Line Version 4.0 850mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of the R-Line series. With More Punch, Lower Internal Resistance, and Less weight, Tattu R-line V4 definitely dominates all your races. Features Very high C rate. De

R-Line Version 4.0 4S 850mAh 130C LiPo Battery with XT60 Connector

The Tattu R-Line Version 4.0 850mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series. 

The Tattu R-Line Version 4.0 850mAh 14.8V 130C 4S1P LiPo battery pack is the updated version of R-Line series. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominates all your races.
Features  

Tattu R-Line Version 4.0 850mAh 4S 130C LiPo Battery - XT60

CNHL

CNHL SpeedyPizza 1550mAh 4S 14.8V 100C Lipo Battery - XT60

China Hobby Line has collaborated with SpeedyPizzaDrones to bring you this unique 1550mAh 4S 100c LiPo battery! "Get your pizza there in less than 30 minutes!"

China Hobby Line has collaborated with SpeedyPizzaDrones to bring you this unique 1550mAh 4S 100c LiPo battery! 