FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

Burst Amp Rating

Stator Width

Stator Length

Capacity (mAh)

C Rating

Propeller Pitch (in)

Propeller Length (in)

Weight (g)

TBS Crossfire Nano RX PRO Long Range Receiver

Team Black Sheep

TBS Crossfire Nano RX Pro. Boost the telemetry output power (downlink), without sacrificing compactness. Same form factor, same pinout, 20x the power!

TBS Crossfire Nano RX Pro FPV Long Range Drone Receiver shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

TBS Crossfire Nano RX Pro FPV Long Range Drone Receiver - RMRC

TBS Crossfire Nano RX Pro FPV Long Range Drone Receiver

Team Blacksheep is stepping up the Long Range / UHF game once again, with no competition in sight! The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power and will ensure that your 50km flights occur without ever losing telemetr

TBS Crossfire Nano RX PRO FPV Long Range Drone Receiver

Team BlackSheep

The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power and will ensure that your 50km flights occur without ever losing telemetry.
Team Blacksheep is stepping up the Long Range / UHF game once again, with no competition in sight! The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power and will ensure that your 50km flights occur without ever losing telemetry. With the Pro version, TBS boosts the telemetry output power (downlink), without sacrificing compactness. Same form factor, same pinout, with 20x the power! The end result is a full range receiver, at the smallest size of any receiver in the industry with an incredibly increased output! 
Features

500mW Output Power (downlink)
20x Power of standard Nano Rx
Higher Telemetry Output
Full Range Receiver

 

 
Specifications

Output Power: Up to 500mW
Weight: 0.5g (receiver only)
Input Power: +3.3V to 8.4V
Requires: Firmware V6.14
Size: 11mm x 18mm

Manual

TBS Crossfire - RED Declaration of Conformity
Quickstart Guide / Manual

Includes

6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)
1x TBS Crossfire Immortal T Antenna
1x TBS Crossfire Nano Receiver Pro
1x Spare Shrink Tube
1x Pin header (1x4)


The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power and will ensure that your 50km flights occur without ever losing telemetry. Team Blacksheep is stepping up the Long Range / UHF game once again, with no competition in sigh

TBS Crossfire Nano RX Pro

The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power and will ensure that your 50km flights occur without ever losing telemetry.

Team Blacksheep is stepping up the Long Range / UHF game once again, with no competition in sight! The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power and

TBS Crossfire Nano Rx Pro

Receiver Type

The radio receiver takes the inputs from your radio and sends them to your flight controller. Your receiver will need to be compatible with your radio or radio module. Beginners should get an ELRS receiver for the best range and price point. Learn more about radios and receivers.

Receivers

TBS Tracer Nano RX

TBS TRACER NANO RX FEATURES:

 	250Hz: Fastest available radio and telemetry link!
 	Next generation 2.4GHz technology meets robust Crossfire radio engine
 	3ms end to end latency
 	Nano-sized receiver with antenna diversity
 	15mi+/25km+ range
 	For drones, planes, helicopters, cars and boats

TBS TRACER NANO RX SPECIFICATIONS:

 	Antnna ports: 2x u.FL / IPEX (diversity)
 	Package contents: 1x TBS Tracer Nano RX, 2x Immortal-T, silicone cables
 	Protocols: 2x CRSF, SBUS, PPM, 6x PWM, SmartAudio 2.0 / 2.1 (VTx Control)
 	Weight: 0.5g (receiver only)
 	Size: 11mm x 18mm

TBS TRACER NANO RX | Five33

TBS TRACER NANO RX

TBS TRACER NANO RX FEATURES250Hz: Fastest available radio and telemetry link!Next generation 2.4GHz technology meets robust Crossfire radio engine3ms end to end latency&quotJR&quot and &quotLITE&quot form factor transmittersNano-sized receiver with antenna diversityUp to 50km range. enough for most.For drones, planes, helicopters, cars and boats

Get the TBS Tracer Nano RX 2.4GHz Crossfire shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

TBS Tracer Nano RX 2.4GHz Crossfire - RMRC

TBS Tracer Nano RX 2.4GHz Crossfire


TBS TRACER NANO RX FEATURES:

250Hz: Fastest available radio and telemetry link!
Next generation 2.4GHz technology meets robust Crossfire radio engine
3ms end to end latency
Nano-sized receiver with antenna diversity
15mi+/25km+ range
For drones, planes, helicopters, cars and boats

TBS TRACER NANO RX SPECIFICATIONS:


Antnna ports: 2x u.FL / IPEX (diversity)

Package contents: 1x TBS Tracer Nano RX, 2x Immortal-T, silicone cables

Protocols: 2x CRSF, SBUS, PPM, 6x PWM, SmartAudio 2.0 / 2.1 (VTx Control)

Weight: 0.5g (receiver only)

Size: 11mm x 18mm


TBS TRACER NANO RX FEATURES: 250Hz: Fastest available radio and telemetry link! Next generation 2.4GHz technology meets robust Crossfire radio engine 3ms end to end latency Nano-sized receiver with antenna diversity 15mi+/25km+ range For drones, planes, helicopters, cars and boats TBS TRACER NANO RX SPECIFICATIONS: Ant

TBS Tracer Nano Rx

In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, range for day

Team Blacksheep TBS Tracer Nano RX

The next generation of crossfire with 2.4GHz technology. Smaller and faster than ever with diversity antennas.

The next generation of crossfire with 2.4GHz technology. Smaller and faster than ever with diversity antennas.
Features

250Hz: Fastest available radio and telemetry link!
Next-generation 2.4GHz technology meets robust Crossfire radio engine
3ms

TBS Crossfire Nano RX

<p>TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX, we condense two years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in 

TBS Crossfire Nano Rx

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX, we condense two years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the smallest size of any receiver in the industry (yes, it's smaller than the XM+).
Specifications

Weight: 0.5g (receiver only)
Size: 11mm x 18mm
Requires: Firmware V2.24

Includes

1x TBS Crossfire Nano Receiver
1x TBS Crossfire Micro Receiver Antenna
1x TBS Immortal-T Antenna
1x Spare shrink tube
6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)
1 x pin header 1x4

Resources

TBS Crossfire - RED Declaration of Conformity
Quickstart Guide / Manual


TBS Crossfire Nano Rx (Special Edition) TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX, we condense two years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The

TBS Crossfire Nano Rx (Special Edition)

TBS Crossfire Nano Rx (Special Edition) DroneRacingParts.com

Welcome one of the best reliable link receivers you will find on the market today! The TBS Crossfire Nano RX! TeamBlackSheep has taken the crossfire receiver and slammed it down in to the smallest receiver we have ever seen for a long range system. Pair this receiver with your mini quad your micro quad your whoop quad or any of your fixed wing airplanes and go further than you have ever have before! Get yours today!
Specifications

Weight: 0.5g (receiver only)
Size: 11mm x 18mm
Requires: Firmware V2.25

Includes

1x TBS Crossfire Nano Receiver
1x TBS Crossfire Micro Antenna
1x Spare shrink tube
6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)
1 x pin header 1x4

Wiring Diagram


Welcome one of the best reliable link receivers you will find on the market today! The TBS Crossfire Nano RX! TeamBlackSheep has taken the crossfire receiver and slammed it down in to the smallest receiver we have ever seen for a long range system. Pair this receiver with your mini quad your micro quad your whoop quad 

Nano 915MHz Receiver For Crossfire Protocol

Team BlackSheep TBS Crossfire Nano RX - 3 Pack TBS Crossfire nano RX for people who want to save space and solder. Full range, designed specifically for mini- and micro-quads! TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering ex

3 Pack Team BlackSheep TBS Crossfire Nano RX

The TBS Crossfire Nano Rx (Special Edition).

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX, we condense two years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case

TBS Crossfire Nano Rx (SE) w/ Immortal T V2 Antenna

Happymodel

Happymodel ELRS EP1 RX 2.4GHz Receiver

HAPPYMODEL

The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for whoop because of the ultra light and Nano size.
Check out our other great receivers, and the rest of our Happymodel offerings.
Specifications

Packet Rate: 25/50/150/250/500Hz
RF Frequency: 2.4GHz
Antenna: Ipex 4
Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX

Includes

1x HappyModel EP1 RX Express LRS Receiver
1x Short antenna
1x Long antenna


The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.

HappyModel 2.4GHz EP1 RX ELRS Receiver

HappyModel 2.4GHz EP1 RX Express LRS Receiver - For Sale At RaceDayQuads

The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.

The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.

On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple .

Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.

Check out our ExpressLRS Collection, all our Receivers and the rest of our Happymodel Products!
SPECIFICATIONS:

 	Type: ISM
 	ESP8285 MCU
 	SX1280IMLTRT RF Module
 	Omnidirectional antenna
 	Frequency Range: 2400 MHz to 2500 MHz
 	Maximum receive refresh rate: 500Hz
 	Minimum receiver refresh rate: 25Hz
 	Working voltage: 5v
 	Weight: 0.42gram(without antenna)
 	Dimension: 10mm*10mm*3mm
 	Peak gain: 2.23dB
 	Package include 1pcs 40mm and 1pcs 90mm Omnidirectional antenna

PACKAGE INCLUDES:

 	1 x Happymodel 2.4g ExpressLRS EP1 RX Receiver module

Notes:
Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the official firmware when Official perfect target available.

More details
https://github.com/ExpressLRS/ExpressLRS

Bind procedure:

 	Supply power to the PP/EP1/EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode
 	Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully.
 	Receiver LED status meanings:
PP RX: LED solid means bind successful or Connection established LED double-flash means in bind mode LED flash slowly means no signal connection from the TX module
EP1/EP2 RX: LED solid means bind successful or Connection established LED double-flash means in bind mode LED flash slowly means no signal connection from the TX module LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1 from the web browser(password: expresslrs)

HAPPYMODEL 2.4G EXPRESSLRS EP1 RX RECEIVER MODULE | Five33

HAPPYMODEL 2.4G EXPRESSLRS EP1 RX RECEIVER MODULE

HappyModel


The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for whoop because of the ultra light and Nano size.
Specifications

Packet Rate: 25/50/150/250/500Hz
RF Frequency: 2.4GHz
Antenna: Ipex 4
Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX

Includes

1x HappyModel EP1 RX Express LRS Receiver



The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you ca

HappyModel 2.4GHz EP1 RX Express LRS Receiver

BetaFPV

BetaFPV ELRS Micro 2.4GHz Receiver

BETAFPV

BETAFPV Micro receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.


A ton of ExpressLRS items are available now!
ExpressLRS PWM Receivers
ExpressLRS now supports direct PWM output from receivers that have been specifically designed for this mode. BETAFPV ELRS Micro receiver features PWM output for the application of fixed-wing, helicopters, RC cars, boats and etc, and supports failsafe function, which can protect RC models from being out of control. Besides, the plug-and-play design makes it very easy and friendly to use.
Note: To work with PWM receiver, please make sure the TX and RX firmware is ELRS V2.0.0.

BETAFPV ExpressLRS Receivers
Choosing a suitable receiver to fly quadcopter or other RC models is very important. BETAFPV ExpressLRS Receivers including ELRS Lite, Nano, Micro, and the newest SuperD, greatly fulfill pilots' requirements for FPV flying.




SuperD RX
Micro RX
Nano RX
Lite RX


Weight
1.1g (RX only)
3.5g (RX only)
0.7g (RX only)
0.47g (Tower), 0.53g (Flat)



Antenna
IPEX MHF + T antenna
IPEX MHF + T antenna
IPEX MHF + T antenna
SMD ceramic antenna



MCU
ESP32-PICO-D4, dual SX1280
ESP8285

ESP8285

ESP8285 



RF Chip
Dual SX1280 + Dual PA
SX128X
SX1280 + PA, SX1276 + PA
SX128X


Frequency
2.4GHz ISM
2.4GHz ISM
2.4GHz ISM, 915MHz (FCC), 868MHz (EU)

2.4GHz ISM



Telemetry Power
100mW
17mW
100mW
17mW


Serial Output Protocol
CRSF
PWM or CRSF
CRSF
CRSF


Model Type
FPV Drone, Fixed-wing aircraft
Fixed-wing aircraft, Helicopter, RC Cars, RC Boats
FPV Drone
Whoop Drone





Specification

Item: BETAFPV ELRS Micro Receiver
Weight: 4.5g (with antenna)
Antenna: IPEX MHF + T antenna (recommend 80mm Dipole T Antenna)
PWM channel: 5 channels
Serial output protocol: PWM or CRSF
Size: 19mm*32mm*9mm (without antenna)
MCU: ESP8285/SX1280/SX1281
Telemetry power: 12.5dbm/17mW
Frequency bands: 2.4GHz ISM
Input voltage: 5V~9V DC @ "+" pad
Default firmware version: ExpressLRS v2.0
Adapted RC Model Type: Multirotors, Fixed-wing aircraft, Helicopters, RC Cars, RC Boats and etc.



Diagram
Below is the diagram for ELRS Micro receiver.

Note: The firmware version of the micro receiver manufactured by our company is ELRS 2.0.0. ELRS Innovative team has officially released version 2.0.0, which is not compatible with the 1.x version. Significantly, the TX module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.
Note: The Micro receiver also supports flash CRSF output firmware, in this case CH2 corresponds to TX and CH3 corresponds to RX.
Please click here to know the way to flash firmware for Micro receiver.
Know More About ExpressLRS
ExpressLRS is an open-source RC link for RC applications. Everyone could find this project on Github or join the discussion in Facebook Group.
ExpressLRS is based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. it aims to achieve the best possible link performance in both speeds, latency, and range. At 900 MHz a maximum of 200 Hz packet rate is supported. At 2.4 GHz a blistering 500Hz is currently supported with a custom OpenTX build. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
More and more vendors start to support the ExpressLRS radio protocol in different parts, like radio transmitter with ELRS in stock, drone with built-in ELRS receiver, ELRS TX module for JR bay, or Nano bay. BETAFPV team take part in this project and provide a series of ExpressLRS components.

Binding Procedure
The Micro receiver comes with officially major release V2.0.0 protocol and has not been set for a Binding Phrase. So please make sure the RF TX module works on officially major release V2.0.0 protocol and no Binding Phrase has been set beforehand.

Enter binding mode by plugging in and unplugging the Micro receiver three times

Make sure the LED is on double flashing, this indicates the Micro receiver is in bind mode
Make sure the RF TX module or radio transmitter also enters the binding mode, which sends out a binding pulse
When the LED light is solid, it indicates that the devices are successfully bound.

Note: once the devices have been successfully bound, the receiver will store the binding information. There would be no need for re-bind on the later use as the devices would be connected automatically.
Note: If you reflash the firmware of the Micro receiver with your own Binding Phrase, please make sure the RF TX module has the same Binding Phrase to perform an auto bind. 
Failsafe and PWM Output
When the connection or signal is lost between the radio transmitter and receiver, the failsafe function will adjust all the channels to the failsafe values set by the users, maximum keep safety and prevent from flying away. It's necessary to set up failsafe values properly if you are not using a flight controller, such as RC fixed-wing.

Power on the Micro receiver and wait for 20 seconds without binding.
Once the indicator is flashing quickly, the receiver's WiFi has been activated.
Connect WiFi via computer or mobile phone. 

WiFi Name: ExpressLRS RX
WiFi PWD: expresslrs
Open the website address: http://10.0.0.1, and set your own failsafe values.


Note: Failsafe values are absolute and do not use the "invert" flag.
Micro receiver LED status indication is shown below.



Indicator status
Meaning


Solid on
Connected successfully


Double flashing

Binding status


Flashing slowly
Connection fail


Flashing quickly
WIFI upgrade status



FAQ
Please click here to download the manual for ELRS Micro Receiver.
Recommend ExpressLRS Recovery Dongle for unbricking the receiver.
Package

1 * ELRS Micro Receiver
1 * BETAFPV 80mm T antenna




BETAFPV Micro receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. A ton of Expre

BetaFPV ELRS Micro 2.4GHz Receiver

More Receivers

TBS Crossfire Nano RX PRO Long Range Receiver

TBS Tracer Nano RX

TBS Crossfire Nano RX

Happymodel ELRS EP1 RX 2.4GHz Receiver