FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Kotking

Kotking Water Resistant Electronics Coating - 15ml

WREKD General

Kotking is a clear silicone based water resistant coating for electronics. Kotking is water resistant and designed to dissipate heat, it will not melt off during those full throttle punch outs. When applied properly, Kotking will prevent damage from exposure to liquids.
Check out our other building tools and supplies!
Specifications

Color: Clear/transparent
Size: 15mL
Material: Silicone Based

Includes

1x Kotking Water Resistant Electronics Coating - 15ml

Instructions

Tear down all parts so you can easilly put KOTKING on them, no need to unsolder
Clean up all surfaces with air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it
Apply KOTKING to all components such as flight controller, VTX, camera boards evenly and slowly you can use our tiny brush or wood stick to make them even
put them in balanced potition and let them dry for about 15-20 mins, and you can do the same for the low side later
To coat FPV camera you can put KOTKING on camera connector, on camera case especially on connection between case,and FPV camera focus ring
Do not coat wiring harness connectors
Do one side at a time or until KOTKING dry and you can do the other side


Kotking is a clear silicone based water resistant coating for electronics. Kotking is water resistant and designed to dissipate heat, it will not melt off during those full throttle punch outs. When applied properly, Kotking will prevent damage from exposure to liquids. Check out our other building tools and supplies! 

Kotking Water Resistant Electronics Coating - 15ml from WREKD Co.

The Best way to coat your R/C for full Splash proof &amp; electrical short circuit prevention, PLUS retains heat dissipation. * not allowed to import into Mexico Check out all our Flight Controller Accessories! Specifications: Size: 15ml Package Includes: 1 x KOTKING R/C Coating 15ml Why KOTKING? Splash proof &amp; pre

KOTKING R/C Coating 15ml

KOTKING

KOTKING&nbspis a splashproof R/C Coating that helps protect your electronics from moisture. Prevent electrical short circuits during inclement weather and unexpected FPV landing! This silicone-based coating dissipates heat and is easily removable for all your FPV building needs.

KOTKING is a splashproof R/C Coating that helps protect your electronics from moisture. Prevent electrical short circuits during inclement weather and unexpected FPV landing! This silicone-based coating dissipates heat and is easily removable fo

KOTKING Splashproof R/C Coating for Electronics - 15ml

Tool Type

Tools

TBS Solder

Team BlackSheep

Leaded solder from TBS. Easy to work with and made with plenty of flux to make sure it cures nice and looks professional.

Premium leaded solder with integrated flux to make any solder work a breeze! TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional. Check out our other Soldering Gear and the rest of our TBS products! SPECIFICATIO

TBS Solder 100G Spool 0.5MM Thickness

TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional. Also available in a 15Gr. pocket pack size.Chekout our full collection of Tools &amp; Building supplies and Our Soldering Gear section! Specifications: Type: 

TBS Solder 100G Spool 0.8MM Thickness

TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional.
SPECIFICATION


Type: Leaded

Tin/Lead: 63/37

Flux: 1.8%

DIA: 1.0mm

N.T: 15g


TBS Solder | TBS Solder is spec\'d accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional.SPECIFICATIONType: LeadedTin/Lead: 63/37Flux: 1.8%DIA: 1.0mmN.T: 15g

TBS Solder | Team BlackSheep

TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional. SPECIFICATION Type: Leaded Tin/Lead: 63/37 Flux: 1.8% DIA: 1.0mm N.T: 15g

TBS 1.0mm Leaded Solder - 15g

Generic / No Brand

5 min QUIK-CURE Epoxy + Hardener

BobSmithIndustries

5 min. QUICK-CURE™ 4.5 oz, Epoxy + Hardener

5 min. QUIK-CURE™ Epoxy + Hardener

IC-LOC Blue Threadlocker

A 1/3 ounce bottle of IC-LOC Blue threadlocker CA.

IC-LOC Blue Threadlocker (1/3 oz.)

Insta-Set CA Accelerator

A 2 ounce bottle of Insta-Set CA accelerator.

Insta-Set CA Accelerator (2 oz.)

Foam-Cure EPP Foam Glue

A 4 ounce bottle of Foam-Cure EPP foam glue.

Foam-Cure EPP Foam Glue (4 oz.)

A 1 ounce bottle of Foam-Cure EPP foam glue.

Foam-Cure EPP Foam Glue (1 oz.)

Super-Gold+ Odorless CA Glue

A 1/2 ounce bottle of Super-Gold+ odorless CA glue.

Super-Gold+ Odorless CA Glue (1/2 oz.)

Super-Gold Thin Odorless CA Glue

A 1/2 ounce bottle of Super-Gold thin odorless CA glue.

Super-Gold Thin Odorless CA Glue (1/2 oz.)

Insta-Flex+ Clear Rubber CA Glue

A 1 ounce bottle of Insta-Flex+ clear rubber CA glue.

Insta-Flex+ Clear Rubber CA Glue (1 oz.)

Maxi-Cure Extra Thick CA Glue

A 1 ounce bottle of Maxi-Cure extra thick CA glue.

Maxi-Cure Extra Thick CA Glue (1 oz.)

Insta-Cure+ Gap Filling CA Glue

A 1 ounce bottle of Insta-Cure gap filling CA glue.

Insta-Cure+ Gap Filling CA Glue (1 oz.)

Insta-Cure Super Thin CA Glue

A 1 ounce bottle of Insta-Cure Super Thin CA glue

Insta-Cure Super Thin CA Glue (1 oz.)

NewBeeDrone

NewBeeDrone NO BIG DEAL Conformal Coating

Apply this to your electronic circuitry to protect against moisture, dust, chemicals, and temperature extremes.

NewBeeDrone NO BIG DEAL Conformal Coating from WREKD Co.

NewBeeDrone NO BIG DEAL Solder Flux

NewBeeDrone NO BIG DEAL Solder Flux
The NewBeeDrone No BIG DEAL Solder Flux helps your soldering processes by removing oxide films which form on the surface of metals being soldered. It increases the wetting ability of the solder, causing it to flow more uniformly over surfaces without balling-up (dewetting) to get a cleaner and even solder job.

NewBeeDrone NO BIG DEAL Solder Flux The NewBeeDrone No BIG DEAL Solder Flux helps your soldering processes by removing oxide films which form on the surface of metals being soldered. It increases the wetting ability of the solder, causing it to flow more uniformly over surfaces without balling-up (dewetting) to get a c

NewBeeDrone NO BIG DEAL Solder Flux from WREKD Co.

FPV Worry Free Extreme Waterproofing - 20ml

BRANDANFPV

Product may not be available for international shipping due to customs even if cart allows for checkout.
Eliminate your environmental concerns with the Brandan FPV Worry Free Waterproof Coating! Designed to safeguard your FPV electronics from moisture exposure, this is the perfect solution for when the weather isn't ideal. No need to fret just apply Worry Free conformal coating and continue flying without interruption due to unfavorable conditions or humidity! 
Note: Choose between a kit with accessories or just the 20ml tube
Check out our other building tools and supplies!
Features

Protects FPV Electronics from Moisture
Waterproofing Made Simple
Easy Application







Application Instructions

Tear down all parts so you can easily put Worry-Free FPV on, no need to unsolder.
Clean up all surfaces with an air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it.
Apply Worry-Free FPV to all components such as flight controller, VTX, camera boards evenly and slowly. Let dry for 15-20 minutes and then continue to add additional coats as needed to ensure all desired surfaces are covered.
To coat FPV camera you can put Worry-Free FPV on camera connector, on camera case especially on connection between case, and FPV camera focus ring
Do not coat wiring harness connectors.
Do one side at a time or wait until Worry-Free FPV is dry then move to the other side.

Important Tips

The application of this product does not guarantee your electronics will be waterproof. Please always allow time to dry (usually 24h) and test to ensure all desired surfaces are covered.
If you cover chips such as a barometer you may lose the functionality of the chip.

Specifications

Color: Clear/Transparent
Material: Silicone
Volume: 20ml

FPV Worry Free Extreme Kit Contents

1x Wooden Application Stick

1x Plastic Application Stick

2x Micro-USB Covers

2x USB-C Covers

1x Medium Brush

1x Toothpick

Includes


1x BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your Version 






Product may not be available for international shipping due to customs even if cart allows for checkout. Eliminate your environmental concerns with the Brandan FPV Worry Free Waterproof Coating! Designed to safeguard your FPV electronics from moisture exposure, this is the perfect solution for when the weather isn't id

BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your Version

BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your V

BrandanFPV

Product may not be available for international shipping due to customs even if cart allows for checkout.
Eliminate your environmental concerns with the Brandan FPV Worry Free Waterproof Coating! Designed to safeguard your FPV electronics from moisture exposure, this is the perfect solution for when the weather isn&#39t ideal. No need to fret just apply Worry Free conformal coating and continue flying without interruption due to unfavorable conditions or humidity! 
Note: Choose between a kit with accessories or just the 20ml tube
Check out our other building tools and supplies!
Features

Protects FPV Electronics from Moisture
Waterproofing Made Simple
Easy Application







Application Instructions

Tear down all parts so you can easily put Worry-Free FPV on, no need to unsolder.
Clean up all surfaces with an air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it.
Apply Worry-Free FPV to all components such as flight controller, VTX, camera boards evenly and slowly. Let dry for 15-20 minutes and then continue to add additional coats as needed to ensure all desired surfaces are covered.
To coat FPV camera you can put Worry-Free FPV on camera connector, on camera case especially on connection between case, and FPV camera focus ring
Do not coat wiring harness connectors.
Do one side at a time or wait until Worry-Free FPV is dry then move to the other side.

Important Tips

The application of this product does not guarantee your electronics will be waterproof. Please always allow time to dry (usually 24h) and test to ensure all desired surfaces are covered.
If you cover chips such as a barometer you may lose the functionality of the chip.

Specifications

Color: Clear/Transparent
Material: Silicone
Volume: 20ml

FPV Worry Free Extreme Kit Contents

1x Wooden Application Stick

1x Plastic Application Stick

2x Micro-USB Covers

2x USB-C Covers

1x Medium Brush

1x Toothpick

Includes


1x BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your Version 






BrandanFPV FPV Worry Free Extreme Waterproofing - 20ml - Choose your Version from WREKD Co.

3mm Solder Wick - 1.5m

Desoldering wick is a copper braid used in the rework and repair of printed circuit boards, computers, cell phones or other electronics. Desoldering wick lets you easily remove the extra solder from components or pads on the circuit board. Just press the braid onto the connection with a hot iron and the solder wicks up into the braid.
Check out all our soldering equipment and tools &ampamp building supplies ! 
Specifications

Oxygen free copper
Length: 1.5m
Width: 3mm

Includes

1x Solder Wick - 1.5m


Desoldering wick is a copper braid used in the rework and repair of printed circuit boards, computers, cell phones or other electronics. Desoldering wick lets you easily remove the extra solder from components or pads on the circuit board. Just press the braid onto the connection with a hot iron and the solder wicks up

3mm Solder Wick - 1.5m from WREKD Co.

FPVELITE

Desoldering wick is a copper braid used in the rework and repair of printed circuit boards, computers, cell phones or other electronics. Desoldering wick lets you easily remove the extra solder from components or pads on the circuit board. Just press the braid onto the connection with a hot iron and the solder wicks up into the braid.
Check out all our soldering equipment and tools &amp building supplies ! 
Specifications

Oxygen free copper
Length: 1.5m
Width: 3mm

Includes

1x Solder Wick - 1.5m


Laminating Film by the Foot

LAMINATIONDEPOT

May need to be folded to fit in package.  If you prefer it rolled up and not creased, contact customer support for options.
Quality glossy laminating film cut from a 25-27" wide roll and sold by the foot. (Max section length is 10ft, for handling)
Laminating your foam aircraft parts adds increases impact resistance, rigidity and overall lifespan. Thinner films are recommended for covering compound curves or complex shapes, while the thicker films are great for adding durability to large flat surfaces and leading edges.Check out all our tools and building supplies and our fixed wing hardware selection!
Specifications
Temp Range

1.5Mil: 260-270°F

1.7Mil: 230-250°F

3Mil: 230-250°F

5Mil: 260-270°F

10Mil: 230-250°F


Includes

1'x 25" Wide Laminate Film  

 
 

May need to be folded to fit in package.  If you prefer it rolled up and not creased, contact customer support for options. Quality glossy laminating film cut from a 25-27" wide roll and sold by the foot. (Max section length is 10ft, for handling) Laminating your foam aircraft parts adds increases impact resistance, ri

Laminating Film by the Foot - Choose Your Thickness

Laminating Film by the Foot - Choose Your Thickness - For Sale At RaceDayQuads

May need to be folded to fit in package.  If you prefer it rolled up and not creased, contact customer support for options.
Quality glossy laminating film cut from a 25-27&quot wide roll and sold by the foot. (Max section length is 10ft, for handling)
Laminating your foam aircraft parts adds increases impact resistance, rigidity and overall lifespan. Thinner films are recommended for covering compound curves or complex shapes, while the thicker films are great for adding durability to large flat surfaces and leading edges.Check out all our tools and building supplies and our fixed wing hardware selection!
Specifications
Temp Range

1.5Mil: 260-270°F

1.7Mil: 230-250°F

3Mil: 230-250°F

5Mil: 260-270°F

10Mil: 230-250°F


Includes

1&#39x 25&quot Wide Laminate Film  

 
 

Laminating Film by the Foot - Choose Your Thickness from WREKD Co.

8mm Fabric Tape - 2ft

This is that adhesive backed fabric tape you&#39ve probably seen holding motor wires on lots of pre-built micros. It&#39s super handy stuff and its matte finish makes for a cleaner looking build than zip ties or electrical tape. We offer it in 2ft strips that are easily enough to fasten the motor wires of a couple 5&quot builds, and several more micros. Check out all our tools and building supplies! Includes   2ft 8mm Fabric Tape  

This is that adhesive backed fabric tape you've probably seen holding motor wires on lots of pre-built micros. It's super handy stuff and its matte finish makes for a cleaner looking build than zip ties or electrical tape. We offer it in 2ft strips that are easily enough to fasten the motor wires of a couple 5" builds,

8mm Fabric Tape (2ft) from WREKD Co.

8mm Fabric Tape (2ft)

This is that adhesive backed fabric tape you've probably seen holding motor wires on lots of pre-built micros. It's super handy stuff and its matte finish makes for a cleaner looking build than zip ties or electrical tape. We offer it in 2ft strips that are easily enough to fasten the motor wires of a couple 5" builds, and several more micros.
Check out all our tools and building supplies!
Includes


2ft 8mm Fabric Tape 


This is that adhesive backed fabric tape you've probably seen holding motor wires on lots of pre-built micros. It's super handy stuff and its matte finish...

RDQ Quad Solder Pocket Pack - 63/37, 0.8mm, 18g

Our house brand solder is now available in a handy pocket dispenser, perfect for your field kit! The tin/lead ratio is as easy to work with and gives your joints maximum shine. The perfect solder to go with your TS-100 or TS-80! Refill the empty tube from your spool easily by coiling solder around a pen.Check out all of our tools &amp building supplies, and our soldering gear! 
Specifications

Wire Diameter: 0.8mm 
Alloy: 63% Tin, 37% Lead
2% Flux by Weight
Weight: 18g

Includes

1x RDQ Quad Solder Pocket Pack - 63/37, 0.8mm, 18g


Our house brand solder is now available in a handy pocket dispenser, perfect for your field kit!

RDQ Quad Solder Pocket Pack - 63/37, 0.8mm, 18g - For Sale at RaceDayQuads

Kester

Kester #951 10mL Soldering Flux Pen

Please note: if ordering from outside the US this item may have extra duty fees from international customs based on your country. 
Make your RDQ solder joints their strongest with this soldering flux pen. Smaller and simpler to use than the flux paste tin, this handy pen makes a great addition to any full service field kit! Check out the rest of our soldering gear, as well as the entire tool and building supply section!
Features

Great for rework and touch-up of SMT, SMD, and through hole solder joints
10Ml pen applicator with specially designed felt tip
Low solids content for practically no residue
Compatible with lead and lead-free solders

Includes

1x Kester #951 10mL Soldering Flux Pen 

Material Safety Data Sheet

Please note: if ordering from outside the US this item may have extra duty fees from international customs based on your country.  Make your RDQ solder joints their strongest with this soldering flux pen. Smaller and simpler to use than the flux paste tin, this handy pen makes a great addition to any full service field

Kester #951 10mL Soldering Flux Pen from WREKD Co.

Make your RDQ solder joints their strongest with this soldering flux pen!