FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

RadioMaster

RadioMaster Bandit Micro ExpressLRS 915/868MHz RF Module

Introducing the all-new RadioMaster Bandit Micro ExpressLRS RF Module.&nbsp

Introducing the all-new RadioMaster Bandit Micro ExpressLRS RF Module. 

RadioMaster Bandit Micro 915MHz ExpressLRS RF Module

After extensive research and collaboration with the ExpressLRS team, we are thrilled to unveil the all-new Bandit ExpressLRS RF Module. This cutting-edge module represents the culmination of our efforts to deliver unparalleled performance and reliability for your long-range drone and UAV applications. Browse The Comple

Bandit Micro 915/868MHz ELRS RF Module

Radio Equipment

The radio is typically your first purchase. You control your quad using your radio which sends signals to your quad’s receiver. Beginner’s should choose an ELRS-compatible radio. Learn more about radios. 

Radio Transmitters and Modules

Bandit Nano ExpressLRS 915/868MHz RF Module

Bandit Nano 915/868MHz ELRS RF Module

Introducing the all-new RadioMaster Bandit Nano ExpressLRS RF Module.&nbsp

Introducing the all-new RadioMaster Bandit Nano ExpressLRS RF Module. 

RadioMaster Bandit Nano 915MHz ExpressLRS RF Module

RadioMaster 2.4GHz 4in1 Nano / JR Transmitter Module

HOBBYPORTER

The RadioMaster 4IN1 External Nano/JR Module, which is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips. This is external nano module can also be used on JR modules, with the included JR adapter. 
RM 4IN1 is compatible with more than 70 RF protocols, including DSMX, Flysky, SFHSS, HiTec, HoTT, OMP, Radiolink, Frsky and many more.  The module features a +20dBm RF gain, a 2.4GHz frequency band, and an operational voltage of 4.5-8.4V.
Designed for OpenTX and EdgeTX systems, the RM 4IN1 module allows the radio to connect with most mainstream protocols on the market. Though when this module is used in conjunction with a suitable EdgeTX or OpenTX compatible radios such as the TX16s, TX12 or Zorro, the RM 4in1 module can be used as a wireless trainer link to a student radio such as another TX16s, TX12, Zorro or any other radio capable of transmitting DSMX, Frsky or Flysky protocols.
Check out all our RC Transmitters and our entire RadioMaster selection!



Features



Up to 20dBm power output


Compatible with more than 70 RF Protocols


Wireless trainer function

JR adapter is included as standard. Support Zorro, Boxer, TX16S MKII, TX12 MKII and more.


Specifications

Operational frequency: 2.4G ISM band (2400mHz - 2483mHz)
RF Chipsets: CC2500, NRF24L01, A7105 and CYRF6936
Dimension: 73x42x22mm (without antenna)
Weight: 30g (without antenna)
Operational voltage: 4.5-8.4V
Operational current:≈100mA
Item: RM 4IN1 Module
RF Gain: +20dBm

Includes


1x RM 4IN1 Module


1x JR Adapter


1x RP-SMA Stick Antenna




The RadioMaster 4IN1 External Nano/JR Module, which is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips. This is external nano module can also be used on JR modules, with the included JR adapter.  RM 4IN1 is compatible with more than 70 RF protocols, including DSMX, Flysky, SFHSS, H

RadioMaster 2.4GHz 4IN1 Nano/JR Transmitter Module

The RadioMaster 4IN1 external module is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips. Designed for OpenTX and EdgeTX systems, the RM 4IN1 module allows the radio to connect with most mainstream protocols on the market.FeaturesUp to 20dBm power outputCompatible with more than 70 RF ProtocolsWireless trainer functionFor Zorro, Boxer, TX16S MKII, TX12 MKII and moreSpecificationItem: RM 4IN1 ModuleOperational voltage: 4.5-8.4VOperational frequency: 2.4G ISM band (2400mHz - 2483mHz)RF Chipsets: CC2500, NRF24L01, A7105 and CYRF6936Operational current:≈100mARF Gain: +20dBmWeight: 30g (without antenna)Dimension: 73*42*22mm (without antenna)Compatible with more than 70 RF protocolsRM 4IN1 is compatible with more than 70 RF protocols, including DSMX, Flysky, SFHSS, HiTec, HoTT, OMP, Radiolink, Frsky and many more.Wireless trainer functionWhen used in conjunction with a suitable EdgeTX or OpenTX compatible...

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

RadioMaster 2.4GHz RM 4IN1 Transmitter External Module - RMRC

RadioMaster 2.4GHz RM 4IN1 Transmitter External Module

The Radiomaster Micro 2.4GHz 4-in-1 Module is an external nano module that can also be used on JR modules with the included JR adapter.

RadioMaster Micro 2.4GHz 4-in-1 Module -  JR / Nano

The RadioMaster 4IN1 external module is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips allowing it to work with over 70 RF protocols including FrSky, DSMX, Flysky, SFHSS, HiTec, HoTT, OMP, Radiolink, and many more! Designed for OpenTX and EdgeTX systems, the RM 4IN1 module allows the radio to connect with most mainstream protocols on the market. Compatible with Nano &amp JR module bays.



Features



Up to 20dBm power output


Compatible with more than 70 RF Protocols


Wireless trainer function


For Zorro, Boxer, TX16S MKII, TX12 MKII and more



Specifications



Item: RM 4IN1 Module


Operational voltage: 4.5-8.4V


Operational frequency: 2.4G ISM band (2400mHz - 2483mHz)


RF Chipsets: CC2500, NRF24L01, A7105 and CYRF6936


Operational current:≈100mA


RF Gain: +20dBm


Weight: 30g (without antenna)


Dimension: 73*42*22mm (without antenna)



Compatible with more than 70 RF protocols

RM 4IN1 is compatible with more than 70 RF protocols, including DSMX, Flysky, SFHSS, HiTec, HoTT, OMP, Radiolink, Frsky and many more.Wireless trainer function



When used in conjunction with a suitable EdgeTX or OpenTX compatible radio such as the TX16s, TX12 or Zorro the RM 4in1 module can be used as a wireless trainer link to a student radio such as another TX16s, TX12, Zorro or any other radio capable of transmitting DSMX, Frsky or Flysky protocols.

NANO &amp JR Adapter
The RadioMaster 4IN1 module is a nano module by default. A JR adapter is included as standard. Support Zorro, Boxer, TX16S MKII, TX12 MKII and more.



Includes


1x RM 4IN1 Module


1x JR Adapter


1x Stick Antenna




The RadioMaster 4IN1 external module is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips allowing it to work with over 70 RF protocols including FrSky, DSMX, Flysky, SFHSS, HiTec, HoTT, OMP, Radiolink, and many more! Designed for OpenTX and EdgeTX systems, the RM 4IN1 module allows 

RM 4in1 Multi-Protocol 2.4GHz TX Module

The RadioMaster 4IN1 external module is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips allowing it to work with over 70 RF protocols including FrSky, DSMX, Flysky, SFHSS, HiTec, HoTT, OMP, Radiolink, and many more! Designed for OpenTX and EdgeTX systems, the RM 4IN1 module allows the radio to connect with most mainstream protocols on the market. Compatible with Nano &amp; JR module bays. Features Up to 20dBm power output Compatible with more than 70 RF Protocols Wireless trainer function For Zorro, Boxer, TX16S MKII, TX12 MKII and more Specifications Item: RM 4IN1 Module Operational voltage: 4.5-8.4V Operational frequency: 2.4G ISM band (2400mHz - 2483mHz) RF Chipsets: CC2500, NRF24L01, A7105 and CYRF6936 Operational current:≈100mA RF Gain: +20dBm Weight: 30g (without antenna) Dimension: 73*42*22mm (without antenna) Compatible with more than 70 RF protocols RM 4IN1 is compatible with more than 70 RF protocols, including DSMX, Flysky, SFHSS, HiTec,

RadioMaster 2.4GHz 4IN1 Nano/JR Transmitter Module from WREKD Co.

RadioMaster Ranger Nano 2.4GHz ELRS Transmitter Module

Want to experience the efficiency, long range and low latency of the ELRS protocol without purchasing a new radio? RadioMaster has you covered!
Featuring up to 1W output, F-1000Hz refresh rates and a high-efficiency cooling system, the Ranger Micro 2.4GHz ELRS Module represents the cutting edge in ELRS technology. Attach the module to a compatible radio (RadioMaster Zorro and more) to enjoy all that ELRS has to offer.
The included T-shape antenna is designed for maximum signal coverage. An optional MOXON antenna is available for directional applications.
*Note: The Ranger Nano 2.4GHz ELRS Module fits Nano module bays, for JR style/Micro connectors, please consider the Ranger and the Ranger Micro modules. 
Features


High-efficiency cooling system


Wifi and Bluetooth support


Packet rates up to F-1000Hz


Up to 1Watt Power output 



T-antenna included

Nano connector, supports Zorro radio


Specifications



Regulatory Domain: ISM2400


MCU: ESP32(main), ESP8285(aux,as ESP backpack)


RF chip: SX1281IMLTRT


Frequency Range: 2400 MHz - 2480 MHz


Maximum packet rate: 500Hz/F-1000Hz (F-1000Hz mode requires EgdeTX 2.7.1 or later)


Minimum receiver refresh rate: 25Hz


RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA) 


Wifi Support: Yes


Bluetooth support: Yes


XT30 Power supply voltage: DC 6V - 16.8V



Weight: 48g (with antenna) / 39g (without antenna)


Dimension: 136*42*26mm (with T antenna) / 74*42*26mm (without antenna)



Includes

1x Ranger ELRS 1W 2.4GHz Nano TX Module
1x T Antenna

 
 

Want to experience the efficiency, long range and low latency of the ELRS protocol without purchasing a new radio? RadioMaster has you covered! Featuring up to 1W output, F-1000Hz refresh rates and a high-efficiency cooling system, the Ranger Micro 2.4GHz ELRS Module represents the cutting edge in ELRS technology. Atta

Ranger ELRS 1W 2.4GHz Nano TX Module

Want to experience the efficiency, long range and low latency of the ELRS protocol without purchasing a new radio? RadioMaster has you covered! Featuring up to 1W output, F-1000Hz refresh rates and a high-efficiency cooling system, the Ranger Micro 2.4GHz ELRS Module represents the cutting edge in ELRS technology. Attach the module to a compatible radio (RadioMaster Zorro and more) to enjoy all that ELRS has to offer. The included T-shape antenna is designed for maximum signal coverage. An optional MOXON antenna is available for directional applications. *Note: The Ranger Nano 2.4GHz ELRS Module fits Nano module bays, for JR style/Micro connectors, please consider the Ranger and the Ranger Micro modules.  Features High-efficiency cooling system Wifi and Bluetooth support Packet rates up to F-1000Hz Up to 1Watt Power output  T-antenna included Nano connector, supports Zorro radio Specifications Regulatory Domain: ISM2400 MCU: ESP32(main), ESP8285(aux,as ESP backpack) RF chip: SX1281IMLTRT Frequency Range: 2400 MHz - 2480 MHz Maximum packet rate: 500Hz/F-1000Hz (F-1000Hz mode requires EgdeTX 2.7.1 or later) Minimum receiver refresh rate: 25Hz RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)  Wifi Support: Yes Bluetooth support: Yes XT30 Power supply voltage: DC 6V - 16.8V Weight: 48g

The RadioMaster Ranger Nano 2.4GHz ELRS Module features a nano module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system.

RadioMaster Ranger Nano 2.4Ghz ELRS Module

V1.6 Ranger Micro &amp Nano Modules: have resolved the external power issue and have begun shipping March.
The RadioMaster Ranger Nano 2.4GHz ELRS Transmitter Module features a nano module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!


Features


The JR connector supports TX16S MKII/TX12 MKII or JR standard 5pin socket radios. 
Micro ExpresssLRS 2.4GHz Module
High-Efficiency Cooling System
WiFi and Bluetooth Support
Max F-1000Hz Packet Rate
1W Power Output

Specifications

Dimension: 136x42x26mm, 48g (with antenna) / 74x42x26mm, 39g (without antenna)
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
MCU: ESP32(main), ESP8285(aux,as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Regulatory Domain: ISM2400
Item: Ranger Nano Module
Weight: 48g (with antenna）
RF chip: SX1281IMLTRT
Bluetooth support: Yes
Wifi Support: Yes

Includes Transmitter Only

1x Nano Standard 8pin Socket Module Bay Adapter
1x Radiomaster Ranger Nano 2.4Ghz ELRS Module
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws

Includes Starter Combo

1x Nano Standard 8pin Socket Module Bay Adapter
1x Radiomaster Ranger Nano 2.4Ghz ELRS Module
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver









The RadioMaster Ranger 2.4GHz ELRS Transmitter module includes everything you need in a nano transmitter. Come get yours with RaceDayQuads today!

RadioMaster Ranger Nano 2.4GHz ELRS Transmitter Module - Choose Version

RadioMaster Ranger Nano 2.4GHz ELRS Transmitter Choose Version For Sale

RadioMaster Ranger Nano 2.4GHz ELRS Module

RadioMaster Ranger Nano 2.4GHz ELRS Module - RMRC

The RadioMaster Ranger Nano 2.4GHz ELRS Module Starter Combo features a nano module bay adapter and additional RPI receivers and one RP2 Receiver.

RadioMaster Ranger Nano 2.4Ghz ELRS Module - Starter Combo

The RadioMaster Ranger Nano 2.4GHz ELRS Module features a nano module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. VIDEO: Ranger 2.4GHz ELRS Module | The pinnacle of ExpressLRS module design Check out all our ExpressLRS Products, Receivers, and the rest of o

The RadioMaster Ranger Nano 2.4GHz ELRS Module Starter Combo features a nano module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. This starter combo also includes additional RPI receivers and one RP2 Receiver. VIDEO: Ranger 2.4GHz ELRS Module | The pinnacle o

RadioMaster Ranger Nano 2.4Ghz ELRS Module V1.6 - Starter Combo

V1.6 Ranger Micro &ampamp Nano Modules: have resolved the external power issue and have begun shipping March.
The RadioMaster Ranger Nano 2.4GHz ELRS Transmitter Module features a nano module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!


Features


The JR connector supports TX16S MKII/TX12 MKII or JR standard 5pin socket radios. 
Micro ExpresssLRS 2.4GHz Module
High-Efficiency Cooling System
WiFi and Bluetooth Support
Max F-1000Hz Packet Rate
1W Power Output

Specifications

Dimension: 136x42x26mm, 48g (with antenna) / 74x42x26mm, 39g (without antenna)
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
MCU: ESP32(main), ESP8285(aux,as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Regulatory Domain: ISM2400
Item: Ranger Nano Module
Weight: 48g (with antenna）
RF chip: SX1281IMLTRT
Bluetooth support: Yes
Wifi Support: Yes

Includes Transmitter Only

1x Nano Standard 8pin Socket Module Bay Adapter
1x Radiomaster Ranger Nano 2.4Ghz ELRS Module
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws

Includes Starter Combo

1x Nano Standard 8pin Socket Module Bay Adapter
1x Radiomaster Ranger Nano 2.4Ghz ELRS Module
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver









V1.6 Ranger Micro &amp; Nano Modules: have resolved the external power issue and have begun shipping March. The RadioMaster Ranger Nano 2.4GHz ELRS Transmitter Module features a nano module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. The starter combo also 

RadioMaster Ranger Nano 2.4GHz ELRS Transmitter Module - Choose Version from WREKD Co.

RadioMaster Ranger Micro 2.4GHz ELRS Transmitter Module

RadioMaster Ranger Micro 2.4GHz ELRS Module

RadioMaster  Ranger Micro 2.4GHz ELRS Module - RMRC

RADIOMASTER

V1.6 Ranger Micro &ampamp Nano Modules: have resolved the external power issue and have begun shipping March. 
The RadioMaster Ranger Micro 2.4GHz ELRS Transmitter Module features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!


Features


The JR connector supports TX16S MKII/TX12 MKII or JR standard 5pin socket radios. 
Micro ExpresssLRS 2.4GHz Module
High-Efficiency Cooling System
WiFi and Bluetooth Support
Max F-1000Hz Packet Rate
1W Power Output

Specifications

Minimum receiver refresh rate: 25Hz
Weight: 50g (with Moxon antenna）
Regulatory Domain: ISM2400
Item: Ranger Micro Module
RF chip: SX1281IMLTRT
Bluetooth support: Yes
Wifi Support: Yes
Dimension: 136x49x33mm, 50g (with Moxon antenna) / 74x49x33mm, 40.5g (without antenna)
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
MCU: ESP32(main), ESP8285(aux,as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
Maximum packet rate: 500Hz/F1000Hz

Includes Transmitter Only

1x Radiomaster Ranger Micro 2.4Ghz ELRS Module
1x JR Standard 5pin Socket Module Bay Adapter
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws

Includes Starter Combo

1x Radiomaster Ranger Micro 2.4Ghz ELRS Module
1x JR Standard 5pin Socket Module Bay Adapter
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver









V1.6 Ranger Micro &amp; Nano Modules: have resolved the external power issue and have begun shipping March.  The RadioMaster Ranger Micro 2.4GHz ELRS Transmitter Module features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. The starter combo also 

RadioMaster Ranger Micro 2.4GHz ELRS Transmitter Module - Choose Version from WREKD Co.

RadioMaster Ranger Micro 2.4GHz ELRS Transmitter Module - Choose Version

The RadioMaster Ranger Micro 2.4GHz ELRS Module features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. VIDEO: Ranger 2.4GHz ELRS Module | The pinnacle of ExpressLRS module design Check out all our ExpressLRS Products, Receivers, and the rest of ou

RadioMaster Ranger Micro 2.4Ghz ELRS Module

The RadioMaster Ranger Micro 2.4GHz ELRS Module features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system.

RadioMaster Ranger Micro 2.4Ghz ELRS Module 

The RadioMaster Ranger Micro 2.4GHz ELRS Module Starter Combo features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. This starter combo also includes additional RPI receivers and one RP2 Receiver. VIDEO: Ranger 2.4GHz ELRS Module | The pinnacle of

RadioMaster Ranger Micro 2.4Ghz ELRS Module V1.6 - Starter Combo

The RadioMaster Ranger Micro 2.4GHz ELRS Module Starter Combo features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. This starter combo also includes additional RPI receivers and one RP2 Receiver.

The RadioMaster Ranger Micro 2.4GHz ELRS Module Starter Combo features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. This starter combo also includes additional RPI receivers an

RadioMaster Ranger Micro 2.4Ghz ELRS Module - Starter Combo

V1.6 Ranger Micro &amp Nano Modules: have resolved the external power issue and have begun shipping March. 
The RadioMaster Ranger Micro 2.4GHz ELRS Transmitter Module features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!


Features


The JR connector supports TX16S MKII/TX12 MKII or JR standard 5pin socket radios. 
Micro ExpresssLRS 2.4GHz Module
High-Efficiency Cooling System
WiFi and Bluetooth Support
Max F-1000Hz Packet Rate
1W Power Output

Specifications

Minimum receiver refresh rate: 25Hz
Weight: 50g (with Moxon antenna）
Regulatory Domain: ISM2400
Item: Ranger Micro Module
RF chip: SX1281IMLTRT
Bluetooth support: Yes
Wifi Support: Yes
Dimension: 136x49x33mm, 50g (with Moxon antenna) / 74x49x33mm, 40.5g (without antenna)
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
MCU: ESP32(main), ESP8285(aux,as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
Maximum packet rate: 500Hz/F1000Hz

Includes Transmitter Only

1x Radiomaster Ranger Micro 2.4Ghz ELRS Module
1x JR Standard 5pin Socket Module Bay Adapter
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws

Includes Starter Combo

1x Radiomaster Ranger Micro 2.4Ghz ELRS Module
1x JR Standard 5pin Socket Module Bay Adapter
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver









The RadioMaster Ranger Micro 2.4GHz ELRS Transmitter has many features including a JR connector, a high-efficiency cooling system, and WiFi and Bluetooth support. RaceDayQuads will grant all your needs!

RadioMaster Ranger Micro 2.4GHz ELRS Transmitter Module - Choose Versi

Want to experience the efficiency, long range and low latency of the ELRS protocol without purchasing a new radio? RadioMaster has you covered!
Featuring up to 1W output, F-1000Hz refresh rates and a high-efficiency cooling system, the Ranger Micro 2.4GHz ELRS Module represents the cutting edge in ELRS technology. Attach the module to a compatible radio (TX16S, TX16S MkII, TX12, TX12 MkII and more) to enjoy all that ELRS has to offer.
The included T-shape antenna is designed for maximum signal coverage. An optional MOXON antenna is available for directional applications.
*Note: The Ranger Micro 2.4GHz ELRS Module fits JR style micro module bays, for Nano connectors, please consider the Ranger and the Ranger Nano modules. 
Features


High-efficiency cooling system


Up to 1Watt Power output 

Wifi and Bluetooth support


Packet rates up to F-1000Hz


T-antenna included



With Micro connector, supports TX16S MKII, TX16S MKII MAX and TX12 MKII radio and more.


Specifications



Regulatory Domain: ISM2400


MCU: ESP32(main), ESP8285(aux,as ESP backpack)


RF chip: SX1281IMLTRT


Frequency Range: 2400 MHz - 2480 MHz


Maximum packet rate: 500Hz/F-1000Hz (F-1000Hz mode requires EgdeTX 2.7.1 or later)


Minimum receiver refresh rate: 25Hz


RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA) 


Wifi Support: Yes


Bluetooth support: Yes


XT30 Power supply voltage: DC 6V - 16.8V



Weight: 48g (with antenna) / 39g (without antenna)


Dimension: 136*42*26mm (with T antenna) / 74*42*26mm (without antenna)



Includes

1x Ranger ELRS 1W 2.4GHz Micro TX Module
1x T Antenna

 
 

Ranger ELRS 1W 2.4GHz Micro TX Module

Want to experience the efficiency, long range and low latency of the ELRS protocol without purchasing a new radio? RadioMaster has you covered! Featuring up to 1W output, F-1000Hz refresh rates and a high-efficiency cooling system, the Ranger Micro 2.4GHz ELRS Module represents the cutting edge in ELRS technology. Attach the module to a compatible radio (TX16S, TX16S MkII, TX12, TX12 MkII and more) to enjoy all that ELRS has to offer. The included T-shape antenna is designed for maximum signal coverage. An optional MOXON antenna is available for directional applications. *Note: The Ranger Micro 2.4GHz ELRS Module fits JR style micro module bays, for Nano connectors, please consider the Ranger and the Ranger Nano modules.  Features High-efficiency cooling system Up to 1Watt Power output  Wifi and Bluetooth support Packet rates up to F-1000Hz T-antenna included With Micro connector, supports TX16S MKII, TX16S MKII MAX and TX12 MKII radio and more. Specifications Regulatory Domain: ISM2400 MCU: ESP32(main), ESP8285(aux,as ESP backpack) RF chip: SX1281IMLTRT Frequency Range: 2400 MHz - 2480 MHz Maximum packet rate: 500Hz/F-1000Hz (F-1000Hz mode requires EgdeTX 2.7.1

RadioMaster Ranger 2.4GHz ELRS Transmitter Module

The RadioMaster Ranger 2.4GHz ELRS Module Starter Combo features a rugged CNC case and two module bay adapters.  Other features include an OLED display, built-in accelerometer, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. The 5 Direction Nav key and customizable shortcut

RadioMaster Ranger 2.4Ghz ELRS Module - Starter Combo

The RadioMaster Ranger 2.4GHz ELRS Module features a rugged CNC case and two module bay adapters. Other features include an OLED display, built-in accelerometer, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. The 5 Direction Nav key and customizable shortcut buttons make this module user-friendly and customizable.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!


Features


2 Customizable Shortcut Buttons
High-Efficiency Cooling System
ExpressLRS 2.4GHz Module
Max F-1000Hz Packet Rate
WiFi and Bluetooth Support
Rugged CNC Housing
RGB Lighting effects
5 Direction NAV Key
1W Power Output
OLED Display

Specifications

Dimension: 178x51x25mm, 138g(with Moxon antenna) / 95x51x25mm, 126g (without antenna)
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Futaba CRSF socket cable: Included
Frequency: ExpressLRS 2.4GHz
Regulatory Domain: ISM2400
Packet Rate: MAX F-1000Hz 
OLED screen: 64x128px
Module bay adapters: JR standard 5pin socket &ampamp Nano standard 8pin socket
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
Weight: 138g (with Moxon antenna) / 135g (with T antenna)
3-Axis Accelerometer: Yes (STK8BA58 MEMS Accelerometer)
Power Output: 1WItem: Ranger 2.4GHz ELRS Module
MCU: ESP32(main), ESP8285(aux, as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
OLED screen: 64x128px
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Futaba CRSF socket cable: Included
Frequency: ExpressLRS 2.4GHz
Regulatory Domain: ISM2400
Packet Rate: MAX F-1000Hz
OLED screen: 64x128px
RF chip: SX1281IMLTRT
Accelerometer: Built-In
RGB: Built-in light strip
Bluetooth support: Yes
3-Axis Accelerometer: Yes (STK8BA58 MEMS Accelerometer)
Wifi Support: Yes
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
Weight: 138g (with Moxon antenna) / 135g (with T antenna)
Module bay adapters: JR standard 5pin socket &ampamp Nano standard 8pin socket

Includes Transmitter Only

1x Nano Standard 8pin Socket Module Bay Adapter
1x JR Standard 5pin Socket Module Bay Adapter
1x Radiomaster Ranger 2.4Ghz ELRS Module
1x 2.4GHz Moxon Antenna - RP-SMA
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws

Includes Starter Combo

1x Nano Standard 8pin Socket Module Bay Adapter
1x JR Standard 5pin Socket Module Bay Adapter
1x Radiomaster Ranger 2.4Ghz ELRS Module
1x 2.4GHz Moxon Antenna - RP-SMA
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver
1x Futaba CRSF socket cable
3x M2x5 Screws

 








The RadioMaster Ranger 2.4GHz ELRS Module features a rugged CNC case and two module bay adapters. Other features include an OLED display, built-in accelerometer, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. The 5 Direction Nav key and customizable shortcut buttons make t

RadioMaster Ranger 2.4GHz ELRS Transmitter Module - Choose Version from WREKD Co.

RadioMaster Ranger 2.4GHz ELRS Transmitter Module - Choose Version

The RadioMaster Ranger 2.4GHz ELRS Module features a rugged CNC case and two module bay adapters.  Other features include an OLED display, built-in accelerometer, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. The 5 Direction Nav key and customizable shortcut buttons make 

Radiomaster Ranger 2.4Ghz ELRS Module

The RadioMaster Ranger 2.4GHz ELRS Module Starter Combo features a rugged CNC case and two module bay adapters.  This starter combo also includes additional RPI receivers and one RP2 Receiver.

The RadioMaster Ranger 2.4GHz ELRS Module features a rugged CNC case and two module bay adapters. Other features include an OLED display, built-in accelerometer, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. The 5 Direction Nav key and customizable shortcut buttons make this module user-friendly and customizable.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!


Features


2 Customizable Shortcut Buttons
High-Efficiency Cooling System
ExpressLRS 2.4GHz Module
Max F-1000Hz Packet Rate
WiFi and Bluetooth Support
Rugged CNC Housing
RGB Lighting effects
5 Direction NAV Key
1W Power Output
OLED Display

Specifications

Dimension: 178x51x25mm, 138g(with Moxon antenna) / 95x51x25mm, 126g (without antenna)
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Futaba CRSF socket cable: Included
Frequency: ExpressLRS 2.4GHz
Regulatory Domain: ISM2400
Packet Rate: MAX F-1000Hz 
OLED screen: 64x128px
Module bay adapters: JR standard 5pin socket &amp Nano standard 8pin socket
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
Weight: 138g (with Moxon antenna) / 135g (with T antenna)
3-Axis Accelerometer: Yes (STK8BA58 MEMS Accelerometer)
Power Output: 1WItem: Ranger 2.4GHz ELRS Module
MCU: ESP32(main), ESP8285(aux, as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
OLED screen: 64x128px
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Futaba CRSF socket cable: Included
Frequency: ExpressLRS 2.4GHz
Regulatory Domain: ISM2400
Packet Rate: MAX F-1000Hz
OLED screen: 64x128px
RF chip: SX1281IMLTRT
Accelerometer: Built-In
RGB: Built-in light strip
Bluetooth support: Yes
3-Axis Accelerometer: Yes (STK8BA58 MEMS Accelerometer)
Wifi Support: Yes
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
Weight: 138g (with Moxon antenna) / 135g (with T antenna)
Module bay adapters: JR standard 5pin socket &amp Nano standard 8pin socket

Includes Transmitter Only

1x Nano Standard 8pin Socket Module Bay Adapter
1x JR Standard 5pin Socket Module Bay Adapter
1x Radiomaster Ranger 2.4Ghz ELRS Module
1x 2.4GHz Moxon Antenna - RP-SMA
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws

Includes Starter Combo

1x Nano Standard 8pin Socket Module Bay Adapter
1x JR Standard 5pin Socket Module Bay Adapter
1x Radiomaster Ranger 2.4Ghz ELRS Module
1x 2.4GHz Moxon Antenna - RP-SMA
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver
1x Futaba CRSF socket cable
3x M2x5 Screws

 








The RadioMaster Ranger is the pinnacle of ExpressLRS module design. Built not only to look great but to last with its rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. The Ranger is up to any task and provides all the power and functionality you need.
Featuring an OLED display, a directional menu key, and two assignable shortcut keys the Ranger can be adjusted on the fly and personalized to your needs.
The Ranger includes a T Antenna for general use and a RadioMaster Moxon antenna for long-range directional applications. A micro module and nano module adapter are included to ensure the Ranger is compatible with most radios on the market today. A cable has also been included for use with Futaba radios that are CRSF capable.

Features


OLED Display


Rugged CNC Case

Built-in Accelerometer

Packet rates up to F-1000Hz

Up to 1 Watt Power output

Wifi and Bluetooth support


High-efficiency cooling system


5 Direction Nav key and customizable shortcut buttons



Micro and Nano adapters included


Moxon and T-antenna included


CRSF cable for compatible Futaba radios included



Specifications


Regulatory Domain: ISM2400


MCU: ESP32(main), ESP8285(aux, as ESP backpack)


RF chip: SX1281IMLTRT


Frequency Range: 2400 MHz - 2480 MHz


Maximum packet rate: 500Hz/F-1000Hz (F-1000Hz mode requires EgdeTX 2.7.1 or later)


Minimum receiver refresh rate: 25Hz


RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA) 


Module bay adapters: JR standard 5pin socket &amp Nano standard 8pin socket


Futaba CRSF socket cable: Included


OLED screen:  64x128px


Wifi Support: Yes


Bluetooth support: Yes


3-Axis Accelerometer: Yes (STK8BA58 MEMS Accelerometer) 


Built-in RGB light strip


XT30 Power supply voltage: DC 6V - 16.8V



Weight: 138g (with Moxon antenna) / 135g (with T antenna) / 126g (without antenna)


Dimension: 95*51*25mm (without antenna)




Includes

1x Ranger ELRS 1W 2.4GHz TX Module
1x T Antenna
1x Moxon Antenna

1x Futaba CRSF socket cable


1x JR Adapter


1x Nano Adapter

1x Hexagon socket screwdriver



3x M2*5 Screws 


1x Assembly Manual

 
 

The RadioMaster Ranger is the pinnacle of ExpressLRS module design. Built not only to look great but to last with its rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. The Ranger is up to any task and provides all the power and functionality you need. Featuring an OLED displ

Ranger ELRS 1W 2.4GHz TX Module

The RadioMaster Ranger is the pinnacle of ExpressLRS module design. Built not only to look great but to last with its rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. The Ranger is up to any task and provides all the power and functionality you need. Featuring an OLED display, a directional menu key, and two assignable shortcut keys the Ranger can be adjusted on the fly and personalized to your needs. The Ranger includes a T Antenna for general use and a RadioMaster Moxon antenna for long-range directional applications. A micro module and nano module adapter are included to ensure the Ranger is compatible with most radios on the market today. A cable has also been included for use with Futaba radios that are CRSF capable. Features OLED Display Rugged CNC Case Built-in Accelerometer Packet rates up to F-1000Hz Up to 1 Watt Power output Wifi and Bluetooth support

Radiomaster Ranger 2.4Ghz ELRS Module - Choose Color

(MFR SKU#: HP0157.0033) The RadioMaster Ranger 2.4GHz ELRS Module features a rugged CNC case and two module bay adapters. 

RadioMaster Ranger 2.4Ghz ELRS Module 

BetaFPV

BetaFPV ELRS 1W Micro 2.4GHz RC Transmitter Module

BetaFPV has stepped it up a notch with their new 1 Watt Express LRS transmitter! Compared with 500mW versions, it not only has a built-in cooling fan but also the heat sink is included, which enhances the performance of cooling. So this module can work properly in daily use with no need to worry about temperature.
Check out our ELRS gear, RC Transmitters and all our BetaFPV products! 

Specifications

Packet refresh rate: 50Hz, 150Hz, 250Hz, 500Hz
RF output power: 25mW, 50mW, 250mW, 500mW, 1W
Frequency bands: 2.4GHz ISM
Heatsink: Included
USB Port: Type C
Backpack Function: Supported

Note: Please assemble the antenna before power on. Otherwise, the PA chip in the Micro TX module will be damaged permanently. 
Note: Please DO NOT use 3S or above battery to power up the TX module via XT30 port. Otherwise, the power supply chip in the TX module will be damaged permanently.
Note: Please do not turn on all DIP switches at the same time.

BETAFPV Micro TX Module ELRS V2.0.0 firmware is published. The firmware does not include the Binding Phrase. So please make sure the receiver works on officially major release V2.0.0 protocol and no Binding Phrase set.

Support 5D buttons and the OLED menu with the official ELRS 2.0.0 release.
The color of the LED changes automatically according to the system status.
Other new and various features are fully synchronized with the official ELRS 2.0.0.
When entering OLED menus page with long pressing, the connection between RF TX module and receiver works normally. Please do not change the Pkt Rate, otherwise, you must re-power the receiver.

You could all use the ELRS offical firmware V2.0-RC2 now, but lost the function of OLED and Joystick. We will work with the ELRS dev team and make the ELRS official firmware support the full function of the Micro TX Module. For the milestone, OLED will be supported in the V2.1 officially.
https://github.com/BETAFPV/ExpressLRS
User manual of How to Flash Firmware of ELRS RX/TX.
Includes

1x BETAFPV ELRS Micro TX module
1x BETAFPV Moxon antenna
1x Micro TX module user manual

1x Spare USB data cable (Type-A to Type-C)



BetaFPV has stepped it up a notch with their new 1 Watt Express LRS transmitter! Compared with 500mW versions, it not only has a built-in cooling fan but also the heat sink is included, which enhances the performance of cooling. So this module can work properly in daily use with no need to worry about temperature. Chec

BetaFPV 1 Watt ELRS Micro 2.4GHz RC Transmitter Module - Black from WREKD Co.

BetaFPV 1 Watt ELRS Micro 2.4GHz RC Transmitter Module - Black

BETAFPV

The black BetaFPV 1 Watt ELRS Micro 2.4GHz RC Transmitter Module is one of a kind. It has plenty of power, range, and cooling tech to make it ideal for any type of flying.

Black BetaFPV 1 Watt ELRS Micro 2.4GHz RC Transmitter Module for Sale

The&nbspBETAFPV ELRS 2.4GHz Micro TX Module (1W Version)&nbspsupports all 5D button dimensions based on BETAFPV ELRS V2.0.0 firmware. A new backpack function has been added, allowing wireless communication between ExpressLRS, and other FPV related devices for command and control, or for querying configuration.

The BETAFPV ELRS 2.4GHz Micro TX Module (1W Version) supports all 5D button dimensions based on BETAFPV ELRS V2.0.0 firmware. A new backpack function has been added, allowing wireless communication between ExpressLRS, and other FPV related 

BETAFPV ELRS 2.4GHz Micro TX Module - 1W

The BETAFPV Micro RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
Specifications

Input Voltage: 5-12V
Power connector: XT30
Programming Port: USC-C
Refressh Rate: 50Hz / 150Hz / 250Hz / 500Hz
RF Output Power: 25mW / 50mW / 250mW / 1W
Frequency Band: 2.4GHz ISM
Backpack Function: Supported

Includes

1x ELRS 1W 2.4G Micro TX Module
1x RP-SMA Antenna
1x MMCX Antenna with Adapter


The BETAFPV Micro RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.

ELRS 1W 2.4GHz Micro TX Module

Axis Flying

Axis Flying Thor PRO ELRS 10-1000mW 2.4GHz Micro Transmitter Module

Axisflying

The Axisflying Thor TX Pro is a fully-featured ELRS micro TX module for pilots wanting the best possible experience on ELRS.

Axisflying ELRS Thor TX Pro 2.4GHz 10-1000mW Micro Module

ImmersionRC

ImmersionRC Ghost Uber Lite 2.4GHz RC Transmitter Module For Orqa FPV.Ctrl

The&nbspImmersionRC Ghost Uber Lite RC Transmitter Module&nbspis designed&nbspfor both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race circuit. This module works perfectly with the&nbspOrqa FPV.Ctrl Radio Controller.

The ImmersionRC Ghost Uber Lite RC Transmitter Module is designed for both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race circuit. This module works perfectly with the Orq

ImmersionRC Ghost Uber Lite 2.4GHz RC Transmitter Module

The ImmersionRC Ghost Uber Lite RC Transmitter Module is designed for both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race circuit. This module works perfectly with the Orqa FPV.Ctrl Radio Controller. When you are ready to take your piloting skills to the next l

Happymodel

Happymodel ES24TX Pro ELRS 2.4GHz Transmitter Module

The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module.Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory. If you&#39ve considered making the switch to Express LRS, there&#39s no better time than now!
Check out our other ELRS accessories, as well as the rest of our HappyModel selection.
Specifications

Regulatory Domain: ISM2400
MCU: ESP32(main),ESP8285(aux,as espbackpack)
RF chip: SX1281IMLTRT
JR standard 5pin socket
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
RF Output Power: &ampgt30dBm
Power supply voltage: 5v~10v
Weight: 51gram(without antenna）
Dimension: 70mm*49mm*32.5mm
Antenna gain: 4.18dBi
Firmware target: HappyModel_ES24TX_Pro_Series_2400_TX

Includes

1x ES24TX Pro Micro TX module 
1x Happymodel 2.4GHz Moxon antenna


The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module.Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory

HappyModel ES24TX Pro ELRS 2.4GHz RC Transmitter Module from WREKD Co.

HappyModel ES24TX Pro ELRS 2.4GHz RC Transmitter Module

HAPPYMODEL

The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module.Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory. If you've considered making the switch to Express LRS, there's no better time than now!
Check out our other ELRS accessories, as well as the rest of our HappyModel selection.
Specifications

Regulatory Domain: ISM2400
MCU: ESP32(main),ESP8285(aux,as espbackpack)
RF chip: SX1281IMLTRT
JR standard 5pin socket
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
RF Output Power: &gt30dBm
Power supply voltage: 5v~10v
Weight: 51gram(without antenna）
Dimension: 70mm*49mm*32.5mm
Antenna gain: 4.18dBi
Firmware target: HappyModel_ES24TX_Pro_Series_2400_TX

Includes

1x ES24TX Pro Micro TX module 
1x Happymodel 2.4GHz Moxon antenna


You're going to love the HappyModel ES24TX Pro ELRS 2.4GHz RC Transmitter Module. This amazing module has more features than ever, making it a great asset for any pilot.

HappyModel ES24TX Pro ELRS 2.4GHz RC Transmitter Module for Sale

The ES24TX Pro comes with improvements over the original. Max output power now up to 1000mw, reserved cooling fan, and an RGB LED module.

Happymodel ES24TX Pro 2.4GHz Micro ExpressLRS TX Module

Happymodel ES24TX Slim Pro ELRS 2.4GHz Transmitter Module

This Slim Pro TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high packet rate RF module for RC Airplane and FPV Racing drone. Its main hardware architecture is ESP32, ESP8285 and SX1280 RF chip. The ES24TX Slim Pro module is a complete solution which

Happymodel 2.4g ExpressLRS ES24TX Slim Pro TX module for X-lite & Tango2

This Slim Pro TX module is designed by Happymodel and based on the open-source  ExpressLRS which is a very popular low latency and high packet rate RF module for RC Airplane and FPV Racing drones. Its main hardware architecture is ESP32, ESP8285, and SX1280 RF chip. The ES24TX Slim Pro module is a complete solution which is already pre-load the Expresslrs firmware and its plug-and-play for Frsky X-lite/X-lite pro/X9 Lite, TBS Tango2.This Slim Pro module comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250mw.The slim pro-TX module supports a maximum power output of about 1000mw, this would be very useful for Long Range FPV.
Check out our other ELRS accessorieses, as well as the rest of our HappyModel selection.
Features

Supports up to 1000mw RF power (T-lite radio and Tango2 radio need external power supply)
RGB LED ready
Cooling Fan ready
Open source ExpressLRS
Long-range, low latency, and High re-flashed Rates
Telemetry data transmission supported
CNC aluminum protective shell

Specifications

Regulatory Domain: ISM2400
MCU: ESP32(main),ESP8285(as ESP backpack)
RF chip: SX1280IMLTRT
Frsky Lite 8pin socket
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
RF Output Power: ≤30dBm
Power supply voltage: 5v~12v
Weight: 50gram (without antenna）
Dimension: 67.5x30x20.5mm (without antenna)
Antenna gain: 1.87dBi
Antenna Connector: SMA

Includes

1x HappyModel ES24TX Slim Pro 2.4GHz RC Transmitter Module
1x Antenna


This Slim Pro TX module is designed by Happymodel and based on the open-source  ExpressLRS which is a very popular low latency and high packet rate RF module for RC Airplane and FPV Racing drones. Its main hardware architecture is ESP32, ESP8285, and SX1280 RF chip. The ES24TX Slim Pro module is a complete solution whi

HappyModel ES24TX Slim Pro ELRS 2.4GHz RC Transmitter Module from WREKD Co.

HappyModel ES24TX Slim Pro ELRS 2.4GHz RC Transmitter Module

This Slim Pro TX module is designed by Happymodel and based on the open-source ExpressLRS which is a very popular low latency and high packet rate RF module for RC Airplane and FPV Racing drones. Its main hardware architecture is ESP32, ESP8285, and SX1280 RF chip. The ES24TX Slim Pro module is a complete solution which is already pre-load the Expresslrs firmware and its plug-and-play for Frsky X-lite/X-lite pro/X9 Lite, TBS Tango2. This Slim Pro module comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250mw. The slim pro-TX module supports a maximum power output of about 1000mw, this would be very useful for Long Range FPV.

HappyModel ES24TX Slim Pro 2.4GHz RC Transmitter Module - For Sale At RaceDayQuads

HappyModel


This Slim Pro TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high packet rate RF module for RC Airplane and FPV Racing drone. Its main hardware architecture is ESP32, ESP8285 and SX1280 RF chip. The ES24TX Slim Pro module is a complete solution which is already pre-load the Expresslrs firmware and its plug and play for Frsky X-lite/X-lite pro/X9 Lite , TBS Tango2.
This Slim Pro module comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250mw.
The slim pro TX module supports a maximum power output of about 1000mw, this would be very useful for Long Range FPV.


SPECIFICATIONS:

Brand Name: Happymodel
Model: ES24TX Slim Pro
Regulatory Domain: ISM2400
MCU: ESP32(main),ESP8285(as ESP backpack)
RF chip: SX1280IMLTRT
Firmware target: HappyModel_ES24TX_Pro_Series_2400_TX
Frsky Lite 8pin socket
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
RF Output Power: ≤30dBm
Power supply voltage: 5v~12v
Weight: 50g (without antenna）
Dimension: 67.5mm*30mm*20.5mm (without antenna)
Antenna gain: 1.87dBi

Notice: The antenna has been changed to Happymodel Moxon 2.4GHz from Oct.14th 2021
FEATURES:

Supports up to 1000mw RF power (T-lite radio and Tango2 radio need external power supply)
RGB LED ready
Cooling Fan ready
Open source ExpressLRS
Long range, low latency and High re-flashed Rates
Telemetry data transmission supported
CNC aluminum protective shell

NOTE:
The new Slim Pro module supports a maximum power of 1000mw (requires the power of the remote control to drive), and comes with RGB LED lights, the effect is very cool. The default program has been updated to ExpressLRS V1.0.0.
You can update firmware by ExpressLRS configurator or update the firmware via connect the Wifi hot spot of the “ExpressLRS TX Module”, visit “10.0.0.1” by browser (password: expresslrs)

PACKAGE INCLUDES:


1 x ES24TX Slim Pro TX Module
1 x Happymodel Moxon 2.4GHz antenna


2.4g ExpressLRS ELRS Slim Pro for TX  X Lite and Tango2

2.4g ExpressLRS ELRS Slim Pro for TX X Lite and Tango2

The Happymodel ES24TX Slim Pro TX&nbspModule is a complete solution which is already pre-load the Expresslrs firmware and is plug-and-play for Frsky X-lite/X-lite pro/X9 Lite, and TBS Tango2.

The Happymodel ES24TX Slim Pro TX Module is a complete solution which is already pre-load the Expresslrs firmware and is plug-and-play for Frsky X-lite/X-lite pro/X9 Lite, and TBS Tango2.

Happymodel ES24TX Slim Pro ExpressLRS TX Module

BetaFPV ELRS Nano 915MHz RC Transmitter Module

BETAFPV Nano RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
BETAFPV Nano RF module is compatible with radio transmitter which has the nano module bay (AKA lite module bay, e.g. Frsky Taranis X-Lite, Frsky Taranis X9D Lite, TBS Tango 2)  
Check out our RC Transmitters and all our BetaFPV products! 
Specifications

Packet refresh rate: 25Hz/50Hz/100Hz/200Hz (915MHz/868MHz)
RF output power: 100mW/250mW/500mW
Frequency bands: 915MHz FCC/868MHz EU
Input voltage: 5V-12V
USB port: Type-C

Diagram
Note: Please assemble the antenna before power on. Otherwise, the PA chip in the Nano TX module will be damaged permanently.  

Upgrade the Firmware
The stock firmware of the Nano receiver and TX module manufactured by our company is ELRS V1.0.0-RC5 (the fifth release candidate version)ELRS Innovative team has officially released the first major version V1.0.0 on 17th July. It has some updates :

2.4G Nano TX Module supports 500Hz refresh rate
Short press the button on the Nano module 3 times to get into the binding status.


Includes

1x BetaFPV ELRS Nano 915MHz RC Transmitter Module
1x BetaFPV Moxon Antenna
1x Nano TX Module User Manual


BETAFPV Nano RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. BETAFPV Nan

BetaFPV ELRS Nano 900MHz RC Transmitter Module from WREKD Co.

BetaFPV ELRS Nano 900MHz RC Transmitter Module

The&nbspBETAFPV Nano 915MHz RF TX Module&nbspis based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range.

The BETAFPV Nano 915MHz RF TX Module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range.

BetaFPV ExpressLRS Nano 915MHz RF TX Module

BETAFPV Nano RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. Check out a

BetaFPV ELRS Nano TX Module - 915MHz

ImmersionRC Ghost Next Gen 2.4GHz RC Transmitter Module

From the engineers who changed the Analog FPV world with rapidFIRE, comes the Ghost to set a new bar for R/C Control technologies. Go faster, further, safer. Three years in the making, countless fun-filled hours of testing by the world’s fastest pilots. Ghost is a 2.4GHz Radio Control system for R/C Model Control, with

ImmersionRC Ghost TX 2.4ghz Transmitter Module

The Ghost is the next generation R/C control system from ImmersionRC. 


The Ghost is the next generation R/C control system from ImmersionRC. From the engineers who changed the Analog FPV world with rapidFIRE, comes the Ghost to set a new bar for R/C Control technologies. Go faster, further, and safer.
Features

2.4GHz ISM Band
‘R Compatible Transmitter with Diversity Transmission
One Of The Smallest Receivers On the Market
Chirp Spread Spectrum, with Adaptive FHSS
Crazy Race Performance, 222.22Hz updates
~4ms End to End Latency, with OpenTx Integration
More range than most pilots will ever need

Specifications

Frequency Range: 2406 - 2479MHz
Modulation: Chirp Spread Spectrum + Adaptive FHSS
Binding: Bidirectional with confirmation and protocol negotiation
RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come

JR Module Transmitter Specifications

Uplink Tx Power: 16uW - 350mW (+/- 0.5dB)
Frame Rate: 222.22Hz (purerace), 166Hz (race), 62Hz (normal), 15Hz (long range)
Format: Standard JR Module: tested with FrSky Taranis™, and RadioMaster™ radios
Compatibility: Any R/C Tx which accepts JR modules (Taranis, etc. )
Serial Formats: SBus, GHST 1 - Auto-Sense
Firmware: USB Upgradable(with OTA updates for receivers)
Power Supply: 6V-20V, 1.75W @ 400mW, ~250mA at 7.4V

For the latest firmware and or manuals please click here

The Ghost is the next generation R/C control system from ImmersionRC. From the engineers who changed the Analog FPV world with rapidFIRE, comes the Ghost to set a new bar for R/C Control technologies. Go faster, further, and safer. Features 2.4GHz ISM Band ‘R Compatible Transmitter with Diversity Transmission One Of Th

IRC Ghost Modular Transmitter JR Style 2.4GHz

The Ghost is the next generation R/C control system from ImmersionRC. From the engineers who changed the Analog FPV world with rapidFIRE, comes the Ghost to set a new bar for R/C Control technologies. Go faster, further, and safer. Features 2.4GHz ISM Band ‘R Compatible Transmitter with Diversity Transmission One Of The Smallest Receivers On the Market Chirp Spread Spectrum, with Adaptive FHSS Crazy Race Performance, 222.22Hz updates ~4ms End to End Latency, with OpenTx Integration More range than most pilots will ever need Specifications Frequency Range: 2406 - 2479MHz Modulation: Chirp Spread Spectrum + Adaptive FHSS Binding: Bidirectional with confirmation and protocol negotiation RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come JR Module Transmitter Specifications Uplink Tx Power: 16uW - 350mW (+/- 0.5dB) Frame Rate: 222.22Hz (purerace), 166Hz (race), 62Hz (normal), 15Hz (long range) Format: Standard

ImmersionRC Ghost Lite Next Gen 2.4GHz RC Transmitter Module

All You Want, and a Little More From the engineers who changed the Analog FPV world with rapidFIRE, comes the Ghost to set a new bar for R/C Control technologies. Go faster, further, safer. Three years in the making, countless fun-filled hours of testing by the world’s fastest pilots. Designed in Switzerland. Check out

ImmersionRC Ghost Lite Tx Module

The ImmersionRC Ghost Lite Next Gen 2.4GHz RC Transmitter Module is designed for both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race circuit.


The ImmersionRC Ghost Lite Next Gen 2.4GHz RC Transmitter Module is designed for both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race circuit.
Features

2.4GHz ISM Band
Standard 'Lite' Module:, tested with FrSky XLite™, and FrSky X9 Lite radios
One Of The Smallest Receivers On the Market
Chirp Spread Spectrum, with Adaptive FHSS
Crazy Race Performance: 250Hz,
~4ms End to End Latency, with OpenTx Integration

Specifications

Brand: ImmersionRC
Item Name: IMMERSIONRC GHOST LITE TX MODULE
Frequency Range: 2406 - 2479MHz
Modulation: Chirp Spread Spectrum + Adaptive FHSS
Binding: Bidirectional with confirmation and protocol negotiation
RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come
Uplink Tx Power: 16uW - 350mW (+/- 0.5dB) 3
Frame Rate: 250Hz (purerace), 166Hz (race), 62Hz (normal), 15Hz (long range)
Format: Standard 'Lite' Module: tested with FrSky XLite™, and FrSky X9 Lite radios
Serial Formats: SBus, GHST, Auto-sense
OpenTx support: 2.3.11 release, or 'high performance' synced version of 2.3.11
Firmware: USB Upgradable(with OTA updates for receivers)
Power Supply: 6V-20V, 1.75W @ 350mW, ~250mA at 7.4V

Includes

1 x ImmersionRC Ghost Lite Tx Module


For the latest firmware and or manuals please click here
Note: All Ghost receivers currently have multiple binding methods. It is recommended to bind via SRXL2 on a standard UART, the Ghost Protocol will be available with the release of OpenTX3.4.

The ImmersionRC Ghost Lite Next Gen 2.4GHz RC Transmitter Module is designed for both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race circuit. Features 2.4GHz ISM Band Standard 'Lite' Module:, tested with FrSky XLite™, and FrSky X9 Lite radios One Of The Smalles

IRC Ghost Modular Transmitter Lite 2.4GHz

The ImmersionRC Ghost Lite Next Gen 2.4GHz RC Transmitter Module is designed for both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race circuit. Features 2.4GHz ISM Band Standard 'Lite' Module:, tested with FrSky XLite™, and FrSky X9 Lite radios One Of The Smallest Receivers On the Market Chirp Spread Spectrum, with Adaptive FHSS Crazy Race Performance: 250Hz, ~4ms End to End Latency, with OpenTx Integration Specifications Brand: ImmersionRC Item Name: IMMERSIONRC GHOST LITE TX MODULE Frequency Range: 2406 - 2479MHz Modulation: Chirp Spread Spectrum + Adaptive FHSS Binding: Bidirectional with confirmation and protocol negotiation RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come Uplink Tx Power: 16uW - 350mW (+/- 0.5dB) 3 Frame Rate: 250Hz (purerace), 166Hz (race), 62Hz (normal), 15Hz (long range) Format: Standard 'Lite' Module: tested with FrSky

Happymodel ELRS ES900TX Transmitter Module

The ES915TX module is a long-distance 915mhz wireless transmission developed and designed based on the ExpressLRS open-source software. The ES915TX is characterized by ultra-long-range, stable operation, and low latency. This module is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12, T16, and T18 series remote controllers - basically plug and play. The heat sink has been specially customized for the transmitter module, which can help the transmitter to operate stably under high-power conditions.

The ES915TX module is a long-distance 915mhz wireless transmission developed and designed based on the ExpressLRS open-source software. The ES915TX is characterized by ultra-long-range, stable operation, and low latency. This module is compatible wit

Happymodel ExpressLRS ES900TX Transmitter Module

Happymodel ELRS ES900TX + ES900RX Long Range Combo

The ES900TX and ES900RX modules sets are long-distance 915mhz or 868mhz wireless transmission equipment developed and designed based on the open-source ExpressLRS software. This set of modules is characterized by ultra-long-range, stable operation, and low latency. They are compatible with most Opentx remote controllers.

The ES900TX and ES900RX modules sets are long-distance 915mhz or 868mhz wireless transmission equipment developed and designed based on the open-source ExpressLRS software. This set of modules is characterized by ultra-long-range, stable operation, a

Happymodel ExpressLRS ES900TX + ES900RX Long Range Combo

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This kit from Happymodel is a great combo to start with, it comes with both the receiver and module together. Before you know it, you'll be pushing the limits of what you thought was possible.
Check out our other transmitter modules, as well As the rest of our Happymodel selection!
Features

Compatible with OpenTX remote controllers, including the Radiomaster TX16S and Jumper T12, T16, and T18.
The 900TX module comes with a 2006 fan which allows it to work automatically when the TX power is at 250mW
ExpressLRS open-source software.
Ultra Long Range
Low Latency

Specifications
ES900RX

RF Frequency: optional 915mhz or 686mHz (EU)
Weight: 0.60 gram (excluding antenna)
Telemetry output Power: &lt17dBm
Operation current: ~100Ma
Antenna connector: IPEX1
Rx To FC protocol: CRSF
Dimension: 12x12x3mm
Input Voltage: 5V

ES900TX

Maximum Output Power: &lt33dBm (For &gt27dBm operation, we recommend adding a fan for force cooling)
RF Frequency optional: 915mhz or 868mHz (EU)
Dimension: 55x39x13mm
Input Voltage: 5~13V
Weight: 23g Without Antenna
Antenna Connector: SMA
MCU: ESP32+ESP8285

Includes

1x Happy Model ES900TX &amp ES900RX Combo for ExpressLRS


The HappyModel ES900TX & ES900RX Combo for ExpressLRS is designed for one of the most popular receiver systems in the FPV world. Add it to your build today!

HappyModel ES900TX & ES900RX 900Mhz Receiver/Module Combo for ELRS

HappyModel ES900TX & ES900RX Combo for ExpressLRS for Sale - RaceDayQuads

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This kit from Happymodel is a great combo to start with, it comes with both the receiver and module together. Before you know it, you&#39ll be pushing the limits of what you thought was possible.
Check out our other transmitter modules, as well As the rest of our Happymodel selection!
Features

Compatible with OpenTX remote controllers, including the Radiomaster TX16S and Jumper T12, T16, and T18.
The 900TX module comes with a 2006 fan which allows it to work automatically when the TX power is at 250mW
ExpressLRS open-source software.
Ultra Long Range
Low Latency

Specifications
ES900RX

RF Frequency: optional 915mhz or 686mHz (EU)
Weight: 0.60 gram (excluding antenna)
Telemetry output Power: &amplt17dBm
Operation current: ~100Ma
Antenna connector: IPEX1
Rx To FC protocol: CRSF
Dimension: 12x12x3mm
Input Voltage: 5V

ES900TX

Maximum Output Power: &amplt33dBm (For &ampgt27dBm operation, we recommend adding a fan for force cooling)
RF Frequency optional: 915mhz or 868mHz (EU)
Dimension: 55x39x13mm
Input Voltage: 5~13V
Weight: 23g Without Antenna
Antenna Connector: SMA
MCU: ESP32+ESP8285

Includes

1x Happy Model ES900TX &ampamp ES900RX Combo for ExpressLRS


Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This kit from Happymodel is a great combo to start with, it comes with both the receiver and module together. Before you know it, you'll be pushing the limits of what you thought was possible. Check out our other transmitt

HappyModel ES900TX & ES900RX 900Mhz Receiver/Module Combo for ELRS from WREKD Co.

TBS Tracer Nano TX

Team Black Sheep

In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End-to-end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, we took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, and range for days.
This is a perfect match for the Tracer Nano receiver
Features

250Hz: Fastest available radio and telemetry link

Brand new 2.4GHz technology not found in any other radio link

3ms end-to-end latency

Crossfire engine for ultimate compatibility and functionality

For LITE form factor transmitters

Nano-sized receiver with antenna diversity

15mi+/25km+ range

For drones, planes, helicopters, cars, and boats

Specifications

Latency &amp Refresh Rate: 3ms, 250Hz

Output power: 25mW / 100mW

Frequency Bands: 2.4GHz ISM

Input Voltage: 5V - 9V

Connector: USB-C

Power consumption: 1.1W (@10mW) - 2W (@100mW)

Dimensions: 65 x 48 x 22 mm (JR module size)

Radio Compatibility: Lite module bay (e.g. TBS Tango 2, Taranis X-Lite, X9 Lite), OpenTX V2.1+. The TBS Tracer Nano TX is suggested for use in
Futaba and Spektrum remotes that do not have a JR-module bay

Includes

1x Tracer 100mW 2.4GHz Nano TX Module
1x Antenna
