FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

iFlight

iFlight BNF Helion 10 6S 10" HD Cinematic Long Range Quad - DJI O3 Air Unit, ELRS 2.4GHz, GPS

Introducing the iFlight Chimera 7" Long Range, Long Distance Drone! A super efficient iFlight 7inch Long-Range bird that can go where you couldn't go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above. GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts included to cover you and your antenna dead ends just in case. GoPro universal TPU bottom stand included; fits your original GoPro bracket and our TPU GoPro protectors (additional).Check out the entire Chimera7 Collection and all Replacement Parts!We also carry the Chimera4 LR collection! Check out all our Digital BNF/PNP/RTFs and our other iFlight Products! HIGHLIGHTS: - 6mm rigid arm design for more stiffness - Top- and bottom battery mount option - XING 2806.5 efficient wide stator motors - GPS pre-installed for more safety at distance - GoPro TPU bottom stand (GoPro protector not included) - 360° TPU protection, DJI cam protection and antenna mounts - DJI FPV Air Unit, buttery-smooth 720p\120fps FPV feed (TPU soft mounted) - No props in view (DJI Air unit record in 1080p/60fps) - Battery voltage LED status light (illuminated IF logo on the bottom) PRE-TUNED & PRE-SETUP: - Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience! To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps" - Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode" - GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour. Please check our linked article on "GPS Rescue Mode // Setup" FRAME // ：Chimera7 - Wheelbase: 320mm - Main body dimension: 258*199mm - Bottom to top distance: 20mm - Arm thickness: 6mm - Bottom plate thickness: 3mm - Top plate thickness: 2mm - Upper(middle) plate thickness: 3mm - Camera plate thickness: 3mm (included TPU inserts) ELECTRONICS // SucceX-D F7 V2.1 Stack (50A 4-in-1 ESC)： SucceX-D F7 V2.1 TwinG: - MCU: 216MHz STM32F722 - Gyro：2x ICM20689 - Baro: YES - Blackbox：32MB - Betaflight OSD: YES - BEC: 5V 2.5A / 9V 2.5A - Current sensor scale: 100 - Inverter for SBUS input (UART2-RX) - Smartaudio & Tramp VTX protocol supported - Beeper pad : Yes - RSSI input pad: No - UARTs：5 - Motor outputs: 8 - 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5) - 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V) - BLHeli32 Telemetry：RX5 - Input voltage：recommended 2-6S, MAX 8S - Firmware Target: IFLIGHT_F722_TWING - Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm - Dimensions: 36*36mm - Weight: 7.5g - USB type-C ESC // SucceX 50A: - MCU: STM32F051 - Up tp 48kHz PWM frequency - Capacitance: 470uF/50V - Current Sensor: Yes - Input: 2-6S LIPO - Constant: 50A / Burst: 60A - BlHeli32 telemetry: Yes - BEC: No - Supports up to Dshot1200, Proshot, Oneshot, Multishot - Target: iFlight-BL32-4IN1 - Weight: 14.4g - Mounting pattern: 30.5*30.5mm/Φ3mm - Dimensions: 43*39mm (including the power pads) BNF // Parts list (Build): Prebuilt and indoor tested Quadcopter - 1x Chimera7 frame - 1x GoPro TPU bottom stand incl. lock screw - 1x DJI FPV camera - 1x DJI FPV Air Unit Module - 2x Albatross LHCP RP-SMA 5.8g 150mm antenna - 2 sets x Gemfan tri-blade 7040 props (Set of 4 - Color may vary) - 4x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

IFlight Helion 10 6S HD 10 inch Long Range Drone W/ DJI O3 FPV System - Choose Receiver

HELION - The Long Range flagship by 2RAW and Flight.&nbsp

HELION - The Long Range flagship by 2RAW and Flight. 

iFlight 2Raw Helion 10 Long Range 10" 6S BNF HD w/ DJI O3

iFlight 2Raw Helion 10 Long Range 10&quot 6S BNF HD w/ DJI O3

This drone was built to redefine Long Range. In order to meet the rising demands for more range, and more flight time while maintaining enough weight, to have excellent stability in even the windiest of conditions. With a prop size of 10 inches, Helion is not only capable of effectively carrying large (Recommended, 4500mAh Lipo and above) batteries but also ensuring great efficiency with ample power. You will have better dive recovery and more overall control than traditional long-range drones. Its unique aerodynamic shell allows for easy maintenance while protecting the cores of the power train. Helion’s distinct frame design was scientifically optimized to balance stability, weight, and rigidity.
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products 
Features


Optimised Motors &amp PropellerThis latest XING motor was optimised between thrust and efficiency. Perfectly tuned to the 10 inch Gemfan propellers.


Aero-ShellThe unique aerodynamic shell allows for easy maintenance while protecting the cores of the power train. Users can simply open and close the shell when working on the drone. The idea was to protect the inside but give people full access when maintenance work is being performed on the drone.


Innovative A-Frame for Maximum PerformanceThe frame was scientifically optimised and tested over months to find the balance between stability and weight. The A-Frame design minimises vibrations as well as torsion, one of the biggest problems with larger drones.


USB-C PowerA USB-C Plug was added so you can power your action cam when running out of power. This was also built in for potential upcoming new small cameras making Helion more future proof


DJI O3 HD Air Unit Low-Latency Digital TransmissionUp to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)


4K Stabilized Video with 155° Ultra-Wide AngleTogether with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)


GPS Pre-Installed for More Safety at A DistanceGPS functionality to find your way back on those ultra long range missions. Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.





Specifications

Product Name: Helion10 O3 6S HD

FC: BLITZ F7 Flight Controller

ESC: BLITZ E55 4-IN-1 2-6S 55A ESC

Video Transmission: DJI O3 Air Unit

Geometry: A-Frame

Frame: 418mm wheelbase

Motor: XING2 3110 900KV motors

Prop: GEMFAN 1050 propellers

Weight: 970±20g (Without Battery)

Dimensions (L×W×H)：324x264x63mm

Max Speed: 140km/h

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 26mins with 6S Lipo 5600mAh battery / 30mins with 6S
8000mAh Li-ion battery

Max Cruising Time: Approx. 23mins with 6S Lipo 5600mAh battery / 26mins with
6S 8000mAh Li-ion battery

Operating Temperature Range: -20° to 40° C

Antennas: Dual Antennas

GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Video Transmission 

Product Name: DJI O3 Air Unit

Weight: Approx. 36.4 grams（headband included）

Dimensions (L×W×H): L32.5x W30.5xH 14.5mm

Communication Bandwidth： Max 40 MHz

FOV (single screen): 155°

Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz

End-to-End Latency

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.

810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.

1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.

Max Video Transmission Bitrate: 50 Mbps

Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)

Operating Temperature Range: -10º to 40º C (14° to 104° F)

Power Input: 7.4-26.4 V

Audio Transmission: N/A

END-TO-END LATENCY

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.


 Includes

1x Helion 10 6S HD

2x Battery pad

2x GEMFAN 1050 propellers(Pairs)

2x Battery strap

1xx Screw bag


This drone was built to redefine Long Range. In order to meet the rising demands for more range, and more flight time while maintaining enough weight, to have excellent stability in even the windiest of conditions. With a prop size of 10 inches, Helion is not only capable of effectively carrying large (Recommended, 450

iFlight BNF Helion 10 6S 10" HD Cinematic Long Range Quad w/DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz (GPS) from WREKD Co.

iFlight BNF Helion 10 6S 10

iFlight BNF Helion 10 6S 10" HD Cinematic Long Range Quad w/DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz (GPS)

IFLIGHT

iFlight BNF Helion 10 6S 10" HD Cinematic Long Range Quad w/DJI O3 Air

RaceDayQuads

Pre-Orders shipping ASAP!
This drone was built to redefine Long Range. In order to meet the rising demands for more range, and more flight time while maintaining enough weight, to have excellent stability in even the windiest of conditions. With a prop size of 10 inches, Helion is not only capable of effectively carrying large (Recommended, 4500mAh Lipo and above) batteries but also ensuring great efficiency with ample power. You will have better dive recovery and more overall control than traditional long-range drones. Its unique aerodynamic shell allows for easy maintenance while protecting the cores of the power train. Helion’s distinct frame design was scientifically optimized to balance stability, weight, and rigidity.
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products 
Features


Optimised Motors &amp PropellerThis latest XING motor was optimised between thrust and efficiency. Perfectly tuned to the 10 inch Gemfan propellers.


Aero-ShellThe unique aerodynamic shell allows for easy maintenance while protecting the cores of the power train. Users can simply open and close the shell when working on the drone. The idea was to protect the inside but give people full access when maintenance work is being performed on the drone.


Innovative A-Frame for Maximum PerformanceThe frame was scientifically optimised and tested over months to find the balance between stability and weight. The A-Frame design minimises vibrations as well as torsion, one of the biggest problems with larger drones.


USB-C PowerA USB-C Plug was added so you can power your action cam when running out of power. This was also built in for potential upcoming new small cameras making Helion more future proof


DJI O3 HD Air Unit Low-Latency Digital TransmissionUp to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)


4K Stabilized Video with 155° Ultra-Wide AngleTogether with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)


GPS Pre-Installed for More Safety at A DistanceGPS functionality to find your way back on those ultra long range missions. Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.





Specifications

Product Name: Helion10 O3 6S HD

FC: BLITZ F7 Flight Controller

ESC: BLITZ E55 4-IN-1 2-6S 55A ESC

Video Transmission: DJI O3 Air Unit

Geometry: A-Frame

Frame: 418mm wheelbase

Motor: XING2 3110 900KV motors

Prop: GEMFAN 1050 propellers

Weight: 970±20g (Without Battery)

Dimensions (L×W×H)：324x264x63mm

Max Speed: 140km/h

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 26mins with 6S Lipo 5600mAh battery / 30mins with 6S
8000mAh Li-ion battery

Max Cruising Time: Approx. 23mins with 6S Lipo 5600mAh battery / 26mins with
6S 8000mAh Li-ion battery

Operating Temperature Range: -20° to 40° C

Antennas: Dual Antennas

GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Video Transmission 

Product Name: DJI O3 Air Unit

Weight: Approx. 36.4 grams（headband included）

Dimensions (L×W×H): L32.5x W30.5xH 14.5mm

Communication Bandwidth： Max 40 MHz

FOV (single screen): 155°

Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz

End-to-End Latency

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.

810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.

1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.

Max Video Transmission Bitrate: 50 Mbps

Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)

Operating Temperature Range: -10º to 40º C (14° to 104° F)

Power Input: 7.4-26.4 V

Audio Transmission: N/A

END-TO-END LATENCY

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.


 Includes

1x Helion 10 6S HD

2x Battery pad

2x GEMFAN 1050 propellers(Pairs)

2x Battery strap

1xx Screw bag


Pre-Orders shipping ASAP! This drone was built to redefine Long Range. In order to meet the rising demands for more range, and more flight time while maintaining enough weight, to have excellent stability in even the windiest of conditions. With a prop size of 10 inches, Helion is not only capable of effectively carryi

Pre-Built Quad Kit Type

Pre-Built Quads and Kits

Quad Frame Size

Quad Type

DarwinFPV

DarwinFPV PNP Darwin129 7" Long Range Quadcopter

DarwinFPV Darwin129 7" Long Range PNP Check out all our Long Range BNF/PNP/RTFs and the rest of our DarwinFPV Products! Darwin129: Wheel base: 280mm Frame arm thickness: 5mm Frame kit material: 3K carbon fiber DarwinFPV: 2507 1800KV 3-5S Brushless Motor Motor KV:1800KV Idle Current (Io/10V):0.89A Lipo Cell:3-5S Weight:

DarwinFPV Darwin129 7

Rekon FPV

Rekon FPV BNF Rekon5 5" Mini HD Long Range Quadcopter

The REKON 5 HD is based on the original&nbspDave_C FPV&nbspMiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the&nbsp2004 1800KV motors (6S).&nbsp

The REKON 5 HD is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 1800KV motors 

Rekon FPV Rekon5 5" Mini LR Quadcopter HD w/ Caddx Polar Micro - 6S

Rekon FPV Rekon5 5&quot Mini LR Quadcopter HD w/ Caddx Polar Micro - 6S

The Rekon 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. Like its smaller 4" cousin, this 5" platform can reach flight times of over 25 minutes while being very quiet, efficient, and relatively low cost com

Rekon5 Mini 5

The REKON 5 is based on the original&nbspDave_C FPV&nbspMiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the&nbsp2004 2600KV motors (4S).&nbsp

The REKON 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 2600KV motors (4S

Rekon FPV Rekon5 5" Mini LR Quadcopter HD w/ Caddx Nebula Nano Kit - 4S

Rekon FPV Rekon5 5&quot Mini LR Quadcopter HD w/ Caddx Nebula Nano Kit - 4S

Rekon FPV BNF Rekon5 5" Mini Analog Long Range Quadcopter

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - 3mm Protection Bar

RekonFPV Rekon5 5

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU Camera Fixing Bracket

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU Naked GoPro Mount

The Rekon 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 1800KV motors (6S).&nbsp

The Rekon 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 1800KV motors (6S). 

Rekon FPV Rekon5 5" Mini LR Quadcopter Analog w/ Caddx Ratel V2 - 6S

Rekon FPV Rekon5 5&quot Mini LR Quadcopter Analog w/ Caddx Ratel V2 - 6S

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - 1.5mm Base Plate

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - Arm

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - 1.5mm Top Plate

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - Soter Buzzer TPU Mount

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - SMO 4K Printed Mount

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - 1.5mm Middle Plate

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU Antenna Mount

﻿A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU SMA Antenna Mount

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU T-Shaped Antenna Mount

The REKON 5 is based on the original&nbspDave_C FPV&nbspMiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the&nbsp2004 3000KV motors (4S).&nbsp

The REKON 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 3000KV motors (4S

Rekon FPV Rekon5 5" Mini LR Quadcopter Analog w/ Caddx Ratel V2 - 4S

Rekon FPV Rekon5 5&quot Mini LR Quadcopter Analog w/ Caddx Ratel V2 - 4S

The Rekon 5 is a platform based on the designs of Dave_C FPV, the goal for this build was to maximize flight times while carrying a larger battery and action camera. The extreme efficiency of the larger 2004 motors allow for long flights while also maintaining a higher cruising speed. Aside from the standard essentials

Rekon FPV BNF Rekon3 Nano LR Quadcopter

The Rekon3 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This means you can fit enough batteries to fly for several hours in your po

RekonFPV Rekon 3 Nano Long Range FPV Quad

The Rekon3 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This means you can fit enough batteries to fly for several hours in your pocket! The Rekon3 is also extremely quiet and small.

The Rekon3 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This 

Rekon FPV Rekon3 Nano LR FPV Quad

Flywoo

Flywoo BNF Explorer LR HD 4" Deadcat Quad - DJI O3, ELRS




Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS.
Want a guide for this drone, well here you go: Drone Guide



Features

Long-range capabilities up to 10KM (FCC)
Newest GOKU MINI GPS V3 for Explorer O3

GPS search up to 30 satellites
Plug&ampPlay plug O3 Air unit. Hence there is no need to solder

4K/60fps recording for high-quality footage
Latest GOKU MINI GPS V3 for greater accuracy
Compact and lightweight design, weighing less than 250g even with the battery
Long flight time of up to 30 minutes
User-friendly controls for easy operation


DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.










Specifications


FC and ESC : Goku Versatile F405 Pro Mini Stack ( F405 FC+ 40A ESC ) 8Bit 2-6S 20 x20 Plug&ampPlay plug O3 Air unit
Recommended Battery: Explorer 18650 4S \ Exploer 900mah 4S \ Explorer 750mah 4S
Frame: Explorer LR 4 O3 (Different from OG Explorer LR frame )
Motor: Nin V2 1404 2750kv
Propeller: 4024-2
Antenna: NO
Camera: NO
VTX: NO

GOKU GN F405 Pro Mini 40A 20x20 Stack
GOKU Versatile F405 PRO FC

Input Voltage: 2-6S LipoMCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes

GOKU 406S 8bit 40A ESC

Con. Current: 40A

Burst Current: 45A
Input Voltage: 2-6S
Support DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42×42×4mm
Mounting Hole: 20x20mm (M3)

Includes

1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad (without O3 Unit) - PNP
2x Gemfan Hurricane 4024 20 Blade Propellers (Set of 4)
1x Side Carbon Plate (Set of 2)
1x 3D Printed Part
1x Hardware Set
1x Battery Pad
1x Lens Cover
1x LiPo Strap


Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card. From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. This quad features the GOKU Vers

Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad (without O3 Unit) - PNP

Flywoo BNF Explorer LR 4

FLYWOO




From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. Small, long-range, lightweight, and a DJI O3 FPV Air Unit, now that is a recipe for fun. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS.
Want a guide for this drone, well here you go: Drone Guide
Check out our other DJI O3 Compatible Quads, and also see our other great products from Flywoo!



Features

Long-range capabilities up to 10KM (FCC)
Newest GOKU MINI GPS V3 for Explorer O3

GPS search up to 30 satellites
Plug&ampPlay plug O3 Air unit. Hence there is no need to solder

4K/60fps recording for high-quality footage
Latest GOKU MINI GPS V3 for greater accuracy
Compact and lightweight design, weighing less than 250g even with the battery
Long flight time of up to 30 minutes
User-friendly controls for easy operation


DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.PRE-TUNED AND PRE-SETUPThis RTF is fully built and test-flown by build technicians at Flywoo.
 












Specifications


FC and ESC : Goku Versatile F405 Pro Mini Stack - F405 FC + 40A ESC
Frame: Explorer LR 4 03 (Different from OG Explorer LR frame)
Model: Explorer LR 4 HD DJI 03
Propellers: Gemfan 4024 2-Blade
Motors: NIN 1404 V2 2750Kv
Antenna: DJI 03 antenna
VTX: DJI 03 Air Unit
Wheelbase: 168mm
Camera: DJI 03
Brand: FLYWOO
Weight: 168.4g

GOKU GN F405 Pro Mini 40A 20x20 Stack
GOKU Versatile F405 PRO FC

Input Voltage: 2-6S Lipo
MCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes

GOKU 406S 8bit 40A ESC

Con. Current: 40A

Burst Current: 45A
Input Voltage: 2-6S
Support DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42×42×4mm
Mounting Hole: 20x20mm ( M3)

FPV System

VTX: DJI O3 Air Unit (Requires DJI Goggles 2 or DJI FPV Goggles V2)
Channels: : Auto mode support Manual mode support: 40 MHz: 1 channel 20MHz: 3 channels 10MHz: 3channels
Camera: DJI O3 Air Unit Camera
VTX Antenna: DJI O3 Air Unit Antenna

Includes

1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ DJI O3 Air Unit - ELRS
2x Gemfan 4024-2 Black Propellers (Set of 4)
2x Battery Strap 15x180mm
1x Hardware Set


From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. Small, long-range, lightweight, and a DJI O3 FPV Air Unit, now that is a recipe for fun. This quad features the GOKU Versatile F405 Pro Mi

Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ DJI O3 Air Unit - ELRS




Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at WREKD present you the Flywoo Explorer LR HD. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS.
Want a guide for this drone, well here you go: Drone Guide
Check out our other DJI O3 Compatible Quads, and also see our other great products from Flywoo!



Features

Long-range capabilities up to 10KM (FCC)
Newest GOKU MINI GPS V3 for Explorer O3

GPS search up to 30 satellites
Plug&ampPlay plug O3 Air unit. Hence there is no need to solder

4K/60fps recording for high-quality footage
Latest GOKU MINI GPS V3 for greater accuracy
Compact and lightweight design, weighing less than 250g even with the battery
Long flight time of up to 30 minutes
User-friendly controls for easy operation


DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.










Specifications


FC and ESC : Goku Versatile F405 Pro Mini Stack ( F405 FC+ 40A ESC ) 8Bit 2-6S 20 x20 Plug&ampPlay plug O3 Air unit
Recommended Battery: Explorer 18650 4S \ Exploer 900mah 4S \ Explorer 750mah 4S
Frame: Explorer LR 4 O3 (Different from OG Explorer LR frame )
Motor: Nin V2 1404 2750kv
Propeller: 4024-2
Antenna: NO
Camera: NO
VTX: NO

GOKU GN F405 Pro Mini 40A 20x20 Stack
GOKU Versatile F405 PRO FC

Input Voltage: 2-6S LipoMCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes

GOKU 406S 8bit 40A ESC

Con. Current: 40A

Burst Current: 45A
Input Voltage: 2-6S
Support DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42×42×4mm
Mounting Hole: 20x20mm (M3)

Includes

1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad (without O3 Unit) - PNP
2x Gemfan Hurricane 4024 20 Blade Propellers (Set of 4)
1x Side Carbon Plate (Set of 2)
1x 3D Printed Part
1x Hardware Set
1x Battery Pad
1x Lens Cover
1x LiPo Strap


Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card. From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at WREKD present you the Flywoo Explorer LR HD. This quad features the GOKU Versatile F

Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad (without O3 Unit) - PNP from WREKD Co.




Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS.
Want a guide for this drone, well here you go: Drone Guide
Check out our other DJI O3 Compatible Quads, and also see our other great products from Flywoo!



Features

Long-range capabilities up to 10KM (FCC)
Newest GOKU MINI GPS V3 for Explorer O3

GPS search up to 30 satellites
Plug&ampPlay plug O3 Air unit. Hence there is no need to solder

4K/60fps recording for high-quality footage
Latest GOKU MINI GPS V3 for greater accuracy
Compact and lightweight design, weighing less than 250g even with the battery
Long flight time of up to 30 minutes
User-friendly controls for easy operation


DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.










Specifications


FC and ESC : Goku Versatile F405 Pro Mini Stack ( F405 FC+ 40A ESC ) 8Bit 2-6S 20 x20 Plug&ampPlay plug O3 Air unit
Recommended Battery: Explorer 18650 4S \ Exploer 900mah 4S \ Explorer 750mah 4S
Frame: Explorer LR 4 O3 (Different from OG Explorer LR frame )
Motor: Nin V2 1404 2750kv
Propeller: 4024-2
Antenna: NO
Camera: NO
VTX: NO

GOKU GN F405 Pro Mini 40A 20x20 Stack
GOKU Versatile F405 PRO FC

Input Voltage: 2-6S LipoMCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes

GOKU 406S 8bit 40A ESC

Con. Current: 40A

Burst Current: 45A
Input Voltage: 2-6S
Support DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42×42×4mm
Mounting Hole: 20x20mm (M3)

Includes

1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad (without O3 Unit) - PNP
2x Gemfan Hurricane 4024 20 Blade Propellers (Set of 4)
1x Side Carbon Plate (Set of 2)
1x 3D Printed Part
1x Hardware Set
1x Battery Pad
1x Lens Cover
1x LiPo Strap


Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card. From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. This quad features the GOKU Vers




Pre-Orders shipping ASAP! 
From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at WREKD present you the Flywoo Explorer LR HD. Small, long-range, lightweight, and a DJI O3 FPV Air Unit, now that is a recipe for fun. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS.
Want a guide for this drone, well here you go: Drone Guide
Check out our other DJI O3 Compatible Quads, and also see our other great products from Flywoo!



Features

Long-range capabilities up to 10KM (FCC)
Newest GOKU MINI GPS V3 for Explorer O3

GPS search up to 30 satellites
Plug&ampPlay plug O3 Air unit. Hence there is no need to solder

4K/60fps recording for high-quality footage
Latest GOKU MINI GPS V3 for greater accuracy
Compact and lightweight design, weighing less than 250g even with the battery
Long flight time of up to 30 minutes
User-friendly controls for easy operation


DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.PRE-TUNED AND PRE-SETUPThis RTF is fully built and test-flown by build technicians at Flywoo.
 












Specifications


FC and ESC : Goku Versatile F405 Pro Mini Stack - F405 FC + 40A ESC
Frame: Explorer LR 4 03 (Different from OG Explorer LR frame)
Model: Explorer LR 4 HD DJI 03
Propellers: Gemfan 4024 2-Blade
Motors: NIN 1404 V2 2750Kv
Antenna: DJI 03 antenna
VTX: DJI 03 Air Unit
Wheelbase: 168mm
Camera: DJI 03
Brand: FLYWOO
Weight: 168.4g

GOKU GN F405 Pro Mini 40A 20x20 Stack
GOKU Versatile F405 PRO FC

Input Voltage: 2-6S Lipo
MCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes

GOKU 406S 8bit 40A ESC

Con. Current: 40A

Burst Current: 45A
Input Voltage: 2-6S
Support DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42×42×4mm
Mounting Hole: 20x20mm ( M3)

FPV System

VTX: DJI O3 Air Unit (Requires DJI Goggles 2 or DJI FPV Goggles V2)
Channels: : Auto mode support Manual mode support: 40 MHz: 1 channel 20MHz: 3 channels 10MHz: 3channels
Camera: DJI O3 Air Unit Camera
VTX Antenna: DJI O3 Air Unit Antenna

Includes

1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ DJI O3 Air Unit - ELRS
2x Gemfan 4024-2 Black Propellers (Set of 4)
2x Battery Strap 15x180mm
1x Hardware Set


Pre-Orders shipping ASAP! From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at WREKD present you the Flywoo Explorer LR HD. Small, long-range, lightweight, and a DJI O3 FPV Air Unit, now that is a recipe for fun. This quad features the GOKU Ve

Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ DJI O3 Air Unit - ELRS from WREKD Co.

iFlight BNF/PNP BOB57 Ellis Van Jason LR HD 6" Quadcopter



Introducing the BOB57, a 6" cinematic long-range quad pre-installed with the all-powerful DJI O3 system for crystal clear image quality. This quad aims to best of 5" and 7", hence the name BOB57. This quad is DJI PNP, meaning it does not come with a receiver, meaning you need to install your receiver.  However, if you have the DJI FPV Remote Controller 2, you can bind to the O3 Air Unit. This quad also comes with a GPS pre-installed, allowing all the marvelous features a GPS allows you. The BOB57 comes with XING2 2506 motors with a rated KV 1500, designed around 6S power. 
The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights.
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products 
Features

Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers.
High-end GPS is used to minimize the risk of failure during proximity flights
Long backbone with enough space up to fit 3000mAh 6S batteries
Solid antenna mount for less oscillations when using long antennas
Gladiator shell protects from dust and water droplets

ESCs with built-in spike absorbers for more reliability
Built-in BEC to directly power a GoPro camera
9-minute flight time with 3000mAh 6S Lipo
Front-mounting XT-60
DJI O3 Air Unit










VERSATILE BODY


The Body is designed to carry small to large batteries for agile or long-range missions.











SMART XT60 AND USB-C PLUG


The XT60 plug is located in the front to gain more space. With the USB-C plug you can directly power your GoPro/Action Cams.






OPTIMIZED MOTOR AND PROPS


The Motor is designed for 6inch to give both great performance and efficiency. The prop is specifically optimized for this drone.











RELIABILITY


The BOB57 comes with a shell that protects against hits, droplets, and dust. It also has a high-quality GPS and components for more reliability, like a spike absorber &amp extra capacitor.






PRE-TUNED AND PRE-SETUP



Don't worry about tuning, iFlight did that for you already! A basic PID and Filter tuning were applied for a great flight experience!




Links


Ellis van Jason Tune Setup


Specifications

Product Name: BOB57 O3 6S HD BNF

FC: BLITZ F722

ESC: BLITZ E55 55A 4-IN-1 ESC

Video Transmission: DJI O3 Air Unit

Frame: 280mm wheelbase

Motor: XING2 2506 motors

Prop: GEMFAN 6032-3 propellers

Takeoff Weight: Approx. 580 g

Dimensions (L×W×H)：226×166×34 mm

Max Speed: 180 Km/h (Manual Mode)

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 8 mins (With 6S 1400 no load.)

Max Wind Speed Resistance: Level 7

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: 2 Antenna

GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Video Transmission 

Product Name: DJI O3 Air Unit

Weight: Approx. 36.4 grams（headband included）

Dimensions (L×W×H): L32.5x W30.5xH 14.5mm

Communication Bandwidth： Max 40 MHz

FOV (single screen): 155°

Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz

End-to-End Latency

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.

810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.

1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.

Max Video Transmission Bitrate: 50 Mbps

Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)

Operating Temperature Range: -10º to 40º C (14° to 104° F)

Power Input: 7.4-26.4 V 

Audio Transmission: N/A

 Includes

1x BOB57 6S HD BNF

2x Antennas

2x Battery pads

2x Prop(Pairs)



Introducing the BOB57, a 6" cinematic long-range quad pre-installed with the all-powerful DJI O3 system for crystal clear image quality. This quad aims to best of 5" and 7", hence the name BOB57. This quad is DJI PNP, meaning it does not come with a receiver, meaning you need to install your receiver.  However, if you 

iFlight BNF BOB57 6S 6" HD Cinematic Long Range Quad w/DJI O3 Air Unit & Micro Cam - PNP (GPS)

iFlight BNF BOB57 6S 6" HD Cinematic Long Range Quad w/DJI O3 Air Unit

iFlight BNF BOB57 6S 6" HD Cinematic Long Range Quad w/DJI O3 Air Unit & Micro Cam - PNP (GPS) from WREKD Co.

iFlight BNF BOB57 6S 6

The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp videographer Ellis van Jason.

The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot & videographer Ellis van Jason.

iFlight BOB57 Ellis Van Jason LR 6" Drone HD w/ Nebula Pro Vista - 6S

iFlight BOB57 Ellis Van Jason LR 6&quot Drone HD w/ Nebula Pro Vista - 6S



Introducing the BOB57, a 6" cinematic long-range quad pre-installed with the all-powerful DJI O3 system for crystal clear image quality. This quad aims to best of 5" and 7", hence the name BOB57. This quad is DJI PNP, meaning it does not come with a receiver, meaning you need to install your receiver.  However, if you have the DJI FPV Remote Controller 2, you can bind to the O3 Air Unit. This quad also comes with a GPS pre-installed, allowing all the marvelous features a GPS allows you. The BOB57 comes with XING2 2506 motors with a rated KV 1500, designed around 6S power. 
The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights.
Features

Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers.
High-end GPS is used to minimize the risk of failure during proximity flights
Long backbone with enough space up to fit 3000mAh 6S batteries
Solid antenna mount for less oscillations when using long antennas
Gladiator shell protects from dust and water droplets

ESCs with built-in spike absorbers for more reliability
Built-in BEC to directly power a GoPro camera
9-minute flight time with 3000mAh 6S Lipo
Front-mounting XT-60
DJI O3 Air Unit










VERSATILE BODY


The Body is designed to carry small to large batteries for agile or long-range missions.











SMART XT60 AND USB-C PLUG


The XT60 plug is located in the front to gain more space. With the USB-C plug you can directly power your GoPro/Action Cams.






OPTIMIZED MOTOR AND PROPS


The Motor is designed for 6inch to give both great performance and efficiency. The prop is specifically optimized for this drone.











RELIABILITY


The BOB57 comes with a shell that protects against hits, droplets, and dust. It also has a high-quality GPS and components for more reliability, like a spike absorber &amp extra capacitor.






PRE-TUNED AND PRE-SETUP



Don't worry about tuning, iFlight did that for you already! A basic PID and Filter tuning were applied for a great flight experience!




Links


Ellis van Jason Tune Setup


Specifications

Product Name: BOB57 O3 6S HD BNF

FC: BLITZ F722

ESC: BLITZ E55 55A 4-IN-1 ESC

Video Transmission: DJI O3 Air Unit

Frame: 280mm wheelbase

Motor: XING2 2506 motors

Prop: GEMFAN 6032-3 propellers

Takeoff Weight: Approx. 580 g

Dimensions (L×W×H)：226×166×34 mm

Max Speed: 180 Km/h (Manual Mode)

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 8 mins (With 6S 1400 no load.)

Max Wind Speed Resistance: Level 7

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: 2 Antenna

GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Video Transmission 

Product Name: DJI O3 Air Unit

Weight: Approx. 36.4 grams（headband included）

Dimensions (L×W×H): L32.5x W30.5xH 14.5mm

Communication Bandwidth： Max 40 MHz

FOV (single screen): 155°

Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz

End-to-End Latency

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.

810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.

1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.

Max Video Transmission Bitrate: 50 Mbps

Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)

Operating Temperature Range: -10º to 40º C (14° to 104° F)

Power Input: 7.4-26.4 V 

Audio Transmission: N/A

 Includes

1x BOB57 6S HD BNF

2x Antennas

2x Battery pads

2x Prop(Pairs)



Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad - Walksnail, ELRS

This Flywoo BNF Explorer LR 4" HD 4S Quad comes with Walksnail Avatar V2 &amp Avatar Micro Cam V2, giving you buttery smooth and stabilized video performance. The advanced quadcopter technology lets you take your FPV adventures to new heights! Choose your receiver between ELRS 2.4GHz and TBS CRSF 915 Mhz for a secure flight. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology! This long range quad is a small efficient cruiser with a deadcat design eliminating props in your view, perfect for the elite capabilities of the Walksnail system.
Be sure to check out our Bind-n-Fly collection and our Walksnail Compatible Quads and Electronics as well as other great products from Flywoo!
 Features


Compact and lightweight design, weighing less than 250g even with the battery

Long flight time of up to 30 minutes
User-friendly controls for easy operation
Support 1080P 120fps Recording
Latency Average Delay 22ms
Walksnail Avatar V2 Kit 8G ( Camera &amp VTX)

Walksnail WS-M181 GPS: Featuring the u-blox M10 platform UBX-M10050 GNSS chipset and BUILT-IN QMC5883 MAG, the module offers stronger performance and more accurate positioning.





Specification

Model: Explorer LR 4 HD Walksnail Sub250 Micro Long Range 

Brand: FLYWOO

Frame: Explorer LR 4 HD Walksnail Frame kit

FC and ESC: Goku Versatile F405 Pro Mini Stack ( F405 FC+ 40A ESC )
VTX &amp Cam: Walksnail Avatar HD Kit V2 (8G)

Propeller: Gemfan Hurricane 4024 2

Antenna: Flywoo Circular Polarized 5.8GHz UFL Antenna - LHCP

Motor: NIN 1404 V2 ULTRALIGHT FPV MOTOR

Weight: 168.4g

Flight Controller Specifications


MCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes

 ESC Specifications 

Con. Current: 40A
Burst Current: 45A 
Input Voltage: 2-6S
Support: DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42x42x4mm
Mounting Hole: 20x20mm ( M3)

Motor Specifications



Kv: 2750Kv
Input Voltage: 4-6S
Stator diameter: 14mm
Stator height: 4mm
Bearings: NSK
Wire Length: 24AWG 150mm
Shaft size: 1.5mm
Mounting Screw Pattern: 12x12 mm
Weight: 8.7g

VTX Specifications

Communication Frequency: 5.725-5.850GHz

Transmitter Power(EIRP):  FCC&lt30dBmCE:&lt14dBmSRRC:&lt20dBm

MIC:&lt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 8G

Recording: 1080p/720p

Weight: 17.6g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency Average delay: 22ms

Antenna Connector: U.FL

Camera Specifications

Model Avatar: V2 camera
Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility 1080P/100fps compatibility
Ratio: 4:3 native /16:9
Lens: 2.1mm
FOV: 160°

Aperture: F2.0

Shutter: Rolling shutter

Min.Illumination: 0.001Lux

Weight: 7.2g

Dimensions: 19x19x22mm

Coaxial Cable: 140mm

Prop Specifications

Diameter: 4"
Pitch: 2.4"
Blades: 2
Material: Polycarbonate
Disk Diameter: 102.33mm

Max Prop Width: 13.38mm
Hub Thickness: 5.5mm

Shaft Hole: 1.5mm

Weight: 1.61g

Antenna Specifications 

Gain: 2.2dBi 
Axial ratio: 1.0 Around
Band Width: 5.6Ghz – 6.2GHz 

Axial Ratio: Around 1.0
Polarization: LHCP
Connector: UFL
Weight: 1.6g 

Include

1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ Walksnail Avatar V2 &amp Avatar Micro Cam V2 - Choose Your Receiver
1x Hardware Kit
8x Gemfan 4024-Bi Blade Balck
2x Battery strap 15x180mm
1x Set of screws


This Flywoo BNF Explorer LR 4" HD 4S Quad comes with Walksnail Avatar V2 &amp; Avatar Micro Cam V2, giving you buttery smooth and stabilized video performance. The advanced quadcopter technology lets you take your FPV adventures to new heights! Choose your receiver between ELRS 2.4GHz and TBS CRSF 915 Mhz for a secure 

Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ Walksnail Avatar V2 & Avatar Micro Cam V2 - ELRS

Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ Walksnail Avatar V2 & 

Pre-Orders shipping ASAP!
This Flywoo BNF Explorer LR 4" HD 4S Quad comes with Walksnail Avatar V2 &amp Avatar Micro Cam V2, giving you buttery smooth and stabilized video performance. The advanced quadcopter technology lets you take your FPV adventures to new heights! Choose your receiver between ELRS 2.4GHz and TBS CRSF 915 Mhz for a secure flight. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology! This long range quad is a small efficient cruiser with a deadcat design eliminating props in your view, perfect for the elite capabilities of the Walksnail system.
Be sure to check out our Bind-n-Fly collection and our Walksnail Compatible Quads and Electronics as well as other great products from Flywoo!
 Features


Compact and lightweight design, weighing less than 250g even with the battery

Long flight time of up to 30 minutes
User-friendly controls for easy operation
Support 1080P 120fps Recording
Latency Average Delay 22ms
Walksnail Avatar V2 Kit 8G ( Camera &amp VTX)

Walksnail WS-M181 GPS: Featuring the u-blox M10 platform UBX-M10050 GNSS chipset and BUILT-IN QMC5883 MAG, the module offers stronger performance and more accurate positioning.





Specification

Model: Explorer LR 4 HD Walksnail Sub250 Micro Long Range 

Brand: FLYWOO

Frame: Explorer LR 4 HD Walksnail Frame kit

FC and ESC: Goku Versatile F405 Pro Mini Stack ( F405 FC+ 40A ESC )
VTX &amp Cam: Walksnail Avatar HD Kit V2 (8G)

Propeller: Gemfan Hurricane 4024 2

Antenna: Flywoo Circular Polarized 5.8GHz UFL Antenna - LHCP

Motor: NIN 1404 V2 ULTRALIGHT FPV MOTOR

Weight: 168.4g

Flight Controller Specifications


MCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes

 ESC Specifications 

Con. Current: 40A
Burst Current: 45A 
Input Voltage: 2-6S
Support: DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42x42x4mm
Mounting Hole: 20x20mm ( M3)

Motor Specifications



Kv: 2750Kv
Input Voltage: 4-6S
Stator diameter: 14mm
Stator height: 4mm
Bearings: NSK
Wire Length: 24AWG 150mm
Shaft size: 1.5mm
Mounting Screw Pattern: 12x12 mm
Weight: 8.7g

VTX Specifications

Communication Frequency: 5.725-5.850GHz

Transmitter Power(EIRP):  FCC&lt30dBmCE:&lt14dBmSRRC:&lt20dBm

MIC:&lt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 8G

Recording: 1080p/720p

Weight: 17.6g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency Average delay: 22ms

Antenna Connector: U.FL

Camera Specifications

Model Avatar: V2 camera
Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility 1080P/100fps compatibility
Ratio: 4:3 native /16:9
Lens: 2.1mm
FOV: 160°

Aperture: F2.0

Shutter: Rolling shutter

Min.Illumination: 0.001Lux

Weight: 7.2g

Dimensions: 19x19x22mm

Coaxial Cable: 140mm

Prop Specifications

Diameter: 4"
Pitch: 2.4"
Blades: 2
Material: Polycarbonate
Disk Diameter: 102.33mm

Max Prop Width: 13.38mm
Hub Thickness: 5.5mm

Shaft Hole: 1.5mm

Weight: 1.61g

Antenna Specifications 

Gain: 2.2dBi 
Axial ratio: 1.0 Around
Band Width: 5.6Ghz – 6.2GHz 

Axial Ratio: Around 1.0
Polarization: LHCP
Connector: UFL
Weight: 1.6g 

Include

1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ Walksnail Avatar V2 &amp Avatar Micro Cam V2 - Choose Your Receiver
1x Hardware Kit
8x Gemfan 4024-Bi Blade Balck
2x Battery strap 15x180mm
1x Set of screws


Pre-Orders shipping ASAP! This Flywoo BNF Explorer LR 4" HD 4S Quad comes with Walksnail Avatar V2 &amp; Avatar Micro Cam V2, giving you buttery smooth and stabilized video performance. The advanced quadcopter technology lets you take your FPV adventures to new heights! Choose your receiver between ELRS 2.4GHz and TBS 

Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ Walksnail Avatar V2 & Avatar Micro Cam V2 - ELRS from WREKD Co.

Flywoo BNF Explorer LR 4 V2.2 HD 4" Deadcat Quad - RunCam Link, GPS

Pre-Orders shipping ASAP! 
Long-range FPV cruising with epic landscapes is great, but hard to practice legally &amp without annoying others with noise from a 6 or 7" LR quad. So the #MicroLongRange concept scales down a 7" one until it weighs &lt250g. Flywoo implemented tons of improvements &amp the Explorer LR is equipped with GPS, &amp a model finder. This quad features a GOKU GN405 Nano Stack Flight Controller, non-slip battery pad, and barometer. Pre-tuned and pre-setup, this quad makes it easy to fly right out of the box. Get ready to explore!
Check out our other pre-built quads, as well as other great products from Flywoo!
Features

Strongly recommended for FPV beginners and pilots who like to cruise!
Sub250 Quad (even with battery)
Built-in Bluetooth Module
GOKU GNF405 Stack
Deadcat Design
V2.0 GPS
PRE-TUNED AND PRE-SETUP



Specifications


Item: Explorer LR 4 HD quad
Weight: 162.8g (without battery)
Wheelbase: 168mm
FC &amp ESC: GOKU GN405 Nano 13A STACK ( 16x16 )
Frame: EXPLORER LR 4'' FRAME KIT V2 HD VERSION
Motors: NIN 1404 V2 2750KV ULTRALIGHT FPV MOTOR
Props: Gemfan 4024 2-blade
DJI Digital Vista : RunCam Link Wasp Digital HD FPV Camera System (flywoo.net)
Antenna: Atomic 5.8GHz Antenna Length 130mm ( UFL LHCP)
Battery: 4S 650 95C XT30 \ 4S 750 95C XT30 \ 4S 850 95C XT30 \ 1050 4S XT30 (Tattu customized for Explorer LR) \ 4S 1300 120C XT30 \ Explorer 18650 3000mah

A Message from Dave_C FPV:
"For me personally, Long Range cruising through epic landscapes is the best thing about FPV! But unfortunately, it was always kind of difficult to practice legally and without bothering people with all the noise a massive 6 or 7" long-range quad produces.So the basic idea behind the original Project #MicroLongRange was born: Scale down a 7" long-range quad until it is below 250g take-off weight. With the support of an awesome community on Facebook and Instagram as well as a massive development effort by Flywoo, this concept has seen a lot of improvements that are now all implemented in the Explorer LR!This tiny quad is equipped with GPS, Crossfire, and an independent model finder to give you the necessary confidence to push it to the maximum range of digital and analog video transmission. The powertrain with its GOKU 16x16 stack and the all-new 2750kV 1404 motors spinning 4" props is optimized for maximum efficiency and low weight: Flight times of way over ten minutes on a regular 850mah 4S LiPo battery are easily achievable! Cruising speeds of 40-50 kph (25-30mph) are astonishingly high for such a small quad and have allowed me to do 10km (6 miles) round trips easily. And the best thing about it: It's incredibly quiet! You will barely be able to hear it flying by as soon as you are a few dozen meters away. ”
Includes

1x Flywoo BNF Explorer LR 4 V2.2 HD 4S 4" Deadcat Quad w/RunCam Link and Wasp - PNP (GPS)



Pre-Orders shipping ASAP! Long-range FPV cruising with epic landscapes is great, but hard to practice legally &amp; without annoying others with noise from a 6 or 7" LR quad. So the #MicroLongRange concept scales down a 7" one until it weighs &lt;250g. Flywoo implemented tons of improvements &amp; the Explorer LR is eq

Flywoo BNF Explorer LR 4 V2.2 HD 4S 4" Deadcat Quad w/RunCam Link and Wasp - PNP (GPS) from WREKD Co.

Flywoo BNF Explorer LR 4 V2.2 HD 4S 4

Flywoo BNF Explorer LR 4 V2.2 HD 4S 4" Deadcat Quad w/RunCam Link and Wasp - PNP (GPS)

Long-range FPV cruising with epic landscapes is great, but hard to practice legally &amp without annoying others with noise from a 6 or 7" LR quad. So the #MicroLongRange concept scales down a 7" one until it weighs &lt250g. Flywoo implemented tons of improvements &amp the Explorer LR is equipped with GPS, &amp a model finder. This quad features a GOKU GN405 Nano Stack Flight Controller, non-slip battery pad, and barometer. Pre-tuned and pre-setup, this quad makes it easy to fly right out of the box. Get ready to explore!
Check out our other pre-built quads, as well as other great products from Flywoo!
Features

Strongly recommended for FPV beginners and pilots who like to cruise!
Sub250 Quad (even with battery)
Built-in Bluetooth Module
GOKU GNF405 Stack
Deadcat Design
V2.0 GPS
PRE-TUNED AND PRE-SETUP



Specifications


Item: Explorer LR 4 HD quad
Weight: 162.8g (without battery)
Wheelbase: 168mm
FC &amp ESC: GOKU GN405 Nano 13A STACK ( 16x16 )
Frame: EXPLORER LR 4'' FRAME KIT V2 HD VERSION
Motors: NIN 1404 V2 2750KV ULTRALIGHT FPV MOTOR
Props: Gemfan 4024 2-blade
DJI Digital Vista : RunCam Link Wasp Digital HD FPV Camera System (flywoo.net)
Antenna: Atomic 5.8GHz Antenna Length 130mm ( UFL LHCP)
Battery: 4S 650 95C XT30 \ 4S 750 95C XT30 \ 4S 850 95C XT30 \ 1050 4S XT30 (Tattu customized for Explorer LR) \ 4S 1300 120C XT30 \ Explorer 18650 3000mah

A Message from Dave_C FPV:
"For me personally, Long Range cruising through epic landscapes is the best thing about FPV! But unfortunately, it was always kind of difficult to practice legally and without bothering people with all the noise a massive 6 or 7" long-range quad produces.So the basic idea behind the original Project #MicroLongRange was born: Scale down a 7" long-range quad until it is below 250g take-off weight. With the support of an awesome community on Facebook and Instagram as well as a massive development effort by Flywoo, this concept has seen a lot of improvements that are now all implemented in the Explorer LR!This tiny quad is equipped with GPS, Crossfire, and an independent model finder to give you the necessary confidence to push it to the maximum range of digital and analog video transmission. The powertrain with its GOKU 16x16 stack and the all-new 2750kV 1404 motors spinning 4" props is optimized for maximum efficiency and low weight: Flight times of way over ten minutes on a regular 850mah 4S LiPo battery are easily achievable! Cruising speeds of 40-50 kph (25-30mph) are astonishingly high for such a small quad and have allowed me to do 10km (6 miles) round trips easily. And the best thing about it: It's incredibly quiet! You will barely be able to hear it flying by as soon as you are a few dozen meters away. ”
Includes

1x Flywoo BNF Explorer LR 4 V2.2 HD 4S 4" Deadcat Quad w/RunCam Link and Wasp - PNP (GPS)



Long-range FPV cruising with epic landscapes is great, but hard to practice legally &amp; without annoying others with noise from a 6 or 7" LR quad. So the #MicroLongRange concept scales down a 7" one until it weighs &lt;250g. Flywoo implemented tons of improvements &amp; the Explorer LR is equipped with GPS, &amp; a m

Flywoo BNF Explorer LR 4 V2.2 HD 4S 4" Deadcat Quad w/RunCam Link and 

GEPRC

GEPRC BNF MOZ7 Analog Long Range 7" Quad

Experience unparalleled performance with the GEPR MOZ7, featuring a strong CNC aluminum alloy side plate for versatile camera mounting.&nbsp

Experience unparalleled performance with the GEPR MOZ7, featuring a strong CNC aluminum alloy side plate for versatile camera mounting. 

GEPRC MOZ7 Long Range 7" BNF Analog w/ Caddx Ratel 2

GEPRC MOZ7 Long Range 7&quot BNF Analog w/ Caddx Ratel 2

GEPRC BNF MOZ7 HD Long Range 7" Quad - DJI O3

GEPRC MOZ7 Long Range 7" BNF HD w/ DJI O3

GEPRC MOZ7 Long Range 7&quot BNF HD w/ DJI O3

GEPRC BNF Crocodile75 HD V3 Long Range 7" Quad - DJI O3 , 2.4GHz ELRS

The GEPRC Crocodile75 V3 features a redesigned structure that minimizes fuselage vibrations, resulting in a more stable flight experience. It's equipped with an O3 Air Unit that is augmented with special cooling components.&nbsp

The GEPRC Crocodile75 V3 features a redesigned structure that minimizes fuselage vibrations, resulting in a more stable flight experience. It's equipped with an O3 Air Unit that is augmented with special cooling components. 

GEPRC Crocodile75 V3 7.5" 6S LR HD BNF w/ DJI O3

GEPRC Crocodile75 V3 7.5&quot 6S LR HD BNF w/ DJI O3

Rekon FPV BNF/PNP Rekon35 Nano Analog LR 18650 3.5" Quadcopter

Introducing a new evolution of a nano-long rage drone - the Rekon35 Nano LR 2S Frame Kit. Designed by Dave_C FPV, this frame kit can carry a camera such as the Naked GoPro or Insta360 while staying under 250g.Analog and HD versions are available.

Introducing a new evolution of a nano-long rage drone - the Rekon35 Nano LR 2S Frame Kit. Designed by Dave_C FPV, this frame kit can carry a camera such as the Naked GoPro or Insta360 while staying under 250g.
Analog and HD versions are available.

Rekon FPV Rekon35 Nano LR 3.5" 2S  Frame Kit - Analog

Rekon FPV Rekon35 Nano LR 3.5&quot 2S  Frame Kit - Analog

The REKON 35 Analog is based on designs by Dave_C FPV. This 3.5-inch platform is an evolution of a nano long-range concept adapted to carry a camera such as the Naked GoPro or Insta360 while staying under 250g.

Rekon FPV Rekon35 Nano LR 3.5" 2S 18650 FPV Drone - Analog

Rekon FPV Rekon35 Nano LR 3.5&quot 2S 18650 FPV Drone - Analog

Rekon FPV BNF/PNP Rekon35 Nano HD LR 18650 3.5" Quadcopter

Rekon FPV Rekon35 Nano LR 3.5" 2S Frame Kit - HD Vista

Rekon FPV Rekon35 Nano LR 3.5&quot 2S Frame Kit - HD Vista

The REKON 35 HD is based on designs by Dave_C FPV. This 3.5-inch platform is an evolution of a nano long-range concept adapted to carry a camera such as the Naked GoPro or Insta360 while staying under 250g.

Rekon FPV Rekon35 Nano LR 3.5" 2S 18650 FPV Drone - HD

Rekon FPV Rekon35 Nano LR 3.5&quot 2S 18650 FPV Drone - HD

Flywoo BNF Hexplorer LR Analog 4" Micro Long Range Quadcopter

The HEXplorer is an excellent hexa-copter BNF for freestyling and cruising and allows you to mount a full GoPro. Comes with Caddx Ant FPV Camera, NIN 1404 V2 2750KV Motors, Goku M8N Mini GPS V2, V1 Finder, Atomic 5.8GHz LHCP Antenna, Goku Hm600 600mw VTX, among other cool specs and features! 

The HEXplorer is an excellent hexa-copter BNF for freestyling and cruising and allows you to mount a full GoPro. Comes with Caddx Ant FPV Camera, NIN 1404 V2 2750KV Motors, Goku M8N Mini GPS V2, V1 Finder, Atomic 5.8GHz LHCP Antenna, Goku Hm600 600