FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

HolyBro

Holybro Kopis X8 5" Cinelifter DIY Kit - Caged Version

Holybro

This caged version&nbspHolybro Kopis X8 Cinelifter 5&rdquo&nbspARF Kit&nbspincludes motors and props that you will you need to assemble your Kopis Cinelifter!&nbsp

This caged version Holybro Kopis X8 Cinelifter 5” ARF Kit includes motors and props that you will you need to assemble your Kopis Cinelifter! 

Holybro Kopis X8 5" Cinelifter DIY ARF Kit - Caged Version

Holybro Kopis X8 5&quot Cinelifter DIY ARF Kit - Caged Version

This caged version&nbspHolybro Kopis X8 Cinelifter 5&rdquo&nbspFull Kit&nbsphas everything you need to assemble your Kopis Cinelifter!&nbsp

This caged version Holybro Kopis X8 Cinelifter 5” Full Kit has everything you need to assemble your Kopis Cinelifter! 

Holybro Kopis X8 5" Cinelifter DIY Full Kit - Caged Version

Holybro Kopis X8 5&quot Cinelifter DIY Full Kit - Caged Version

Quad Frame Size

Pre-Built Quads and Kits

Pre-Built Quad Kit Type

Quad Type

Rekon FPV

Rekon FPV BNF Rekon5 5" Mini HD Long Range Quadcopter

The REKON 5 HD is based on the original&nbspDave_C FPV&nbspMiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the&nbsp2004 1800KV motors (6S).&nbsp

The REKON 5 HD is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 1800KV motors 

Rekon FPV Rekon5 5" Mini LR Quadcopter HD w/ Caddx Polar Micro - 6S

Rekon FPV Rekon5 5&quot Mini LR Quadcopter HD w/ Caddx Polar Micro - 6S

The Rekon 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. Like its smaller 4" cousin, this 5" platform can reach flight times of over 25 minutes while being very quiet, efficient, and relatively low cost com

Rekon5 Mini 5

The REKON 5 is based on the original&nbspDave_C FPV&nbspMiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the&nbsp2004 2600KV motors (4S).&nbsp

The REKON 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 2600KV motors (4S

Rekon FPV Rekon5 5" Mini LR Quadcopter HD w/ Caddx Nebula Nano Kit - 4S

Rekon FPV Rekon5 5&quot Mini LR Quadcopter HD w/ Caddx Nebula Nano Kit - 4S

Rekon FPV BNF Rekon5 5" Mini Analog Long Range Quadcopter

The REKON 5 is based on the original&nbspDave_C FPV&nbspMiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the&nbsp2004 3000KV motors (4S).&nbsp

The REKON 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 3000KV motors (4S

Rekon FPV Rekon5 5" Mini LR Quadcopter Analog w/ Caddx Ratel V2 - 4S

Rekon FPV Rekon5 5&quot Mini LR Quadcopter Analog w/ Caddx Ratel V2 - 4S

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - 1.5mm Middle Plate

RekonFPV Rekon5 5

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - Soter Buzzer TPU Mount

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU T-Shaped Antenna Mount

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - SMO 4K Printed Mount

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - 1.5mm Top Plate

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - 3mm Protection Bar

The Rekon 5 is a platform based on the designs of Dave_C FPV, the goal for this build was to maximize flight times while carrying a larger battery and action camera. The extreme efficiency of the larger 2004 motors allow for long flights while also maintaining a higher cruising speed. Aside from the standard essentials

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - 1.5mm Base Plate

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU Naked GoPro Mount

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU Camera Fixing Bracket

﻿A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU SMA Antenna Mount

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - TPU Antenna Mount

The Rekon 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 1800KV motors (6S).&nbsp

The Rekon 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. This version of the Rekon5 comes with the 2004 1800KV motors (6S). 

Rekon FPV Rekon5 5" Mini LR Quadcopter Analog w/ Caddx Ratel V2 - 6S

Rekon FPV Rekon5 5&quot Mini LR Quadcopter Analog w/ Caddx Ratel V2 - 6S

A replacement part for your RekonFPV Rekon5 5" Drone! Package Includes: 1 x RekonFPV Rekon5 5" Drone Replacement Part - Arm

iFlight

iFlight BNF Nazgul5 HD 5" Quadcopter

The Nazgul5 HD is loaded with lots of power it comes with the XING-E 2207 6S 1800KV motors, SucceX-E F7 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have! Now with the Caddx Polar Vista Digital HD System!

The Nazgul5 HD is loaded with lots of power; it comes with the XING-E 2207 6S 1800KV motors, SucceX-E F7 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have! Now with the Caddx Polar Vista Digital HD System

iFlight Nazgul5 HD 5" FPV Freestyle BNF w/Caddx Polar Vista Digital HD System - 6S

iFlight Nazgul5 HD 5&quot FPV Freestyle BNF w/Caddx Polar Vista Digital HD System - 6S

The Nazgul5 HD is loaded with lots of power it comes with the XING-E 2207 4S 2750KV motors, SucceX-E F4 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have! Now with the Caddx Polar Vista Digital HD System!

The Nazgul5 HD is loaded with lots of power; it comes with the XING-E 2207 4S 2750KV motors, SucceX-E F4 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have! Now with the Caddx Polar Vista Digital HD System

iFlight Nazgul5 HD 5" FPV Freestyle BNF w/Caddx Polar Vista Digital HD System - 4S

iFlight Nazgul5 HD 5&quot FPV Freestyle BNF w/Caddx Polar Vista Digital HD System - 4S

The Nazgul5 HD is loaded with lots of power it comes with the XING-E 2207 4S 2750KV motors, SucceX-E F4 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have!

The Nazgul5 HD is loaded with lots of power; it comes with the XING-E 2207 4S 2750KV motors, SucceX-E F4 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have!

iFlight Nazgul5 HD 5" 4S FPV Freestyle BNF w/Caddx Nebula Nano V2 - TBS Crossfire

iFlight Nazgul5 HD 5&quot 4S FPV Freestyle BNF w/Caddx Nebula Nano V2 - TBS Crossfire

The Nazgul5 HD is loaded with lots of power it comes with the XING-E 2207 6S motors, SucceX-E F4 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have! Now with Caddx Polar Vista Digital HD System.

The Nazgul5 HD is loaded with lots of power; it comes with the XING-E 2207 6S motors, SucceX-E F4 Flight Controller, and SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have! Now with Caddx Polar Vista Digital HD System.

iFlight Nazgul5 HD 5" FPV Freestyle BNF w/Caddx Polar Vista Digital HD System - LED - 6S

iFlight Nazgul5 HD 5&quot FPV Freestyle BNF w/Caddx Polar Vista Digital HD System - LED - 6S

GEPRC

GEPRC BNF GEP-MK4 Mark4 HD GPS Freestyle Quadcopter

GEPRC has launched the Mark4 HD GPS, which is a stable, durable, and perfectly structured quad that features the&nbspCaddx Nebula Nano V2.

GEPRC has launched the Mark4 HD GPS, which is a stable, durable, and perfectly structured quad that features the Caddx Nebula Nano V2.

GEPRC Mark4 HD GPS Freestyle Quadcopter BNF w/ Caddx Nebula Nano V2

BetaFPV

BetaFPV BNF X-Knight 5" HD Toothpick Quadcopter

BETAFPV

The X-Knight 5'' Toothpick Quad (HD Digital VTX) is the first ultralight 6S toothpick drone with HD digital VTX released on BETAFPV!&nbsphis toothpick build comes with the&nbspCaddx Vista Digital HD System.

The X-Knight 5'' Toothpick Quad (HD Digital VTX) is the first ultralight 6S toothpick drone with HD digital VTX released on BETAFPV! his toothpick build comes with the Caddx Vista Digital HD System.

BETAFPV X-Knight 5" Toothpick Quadcopter w/ Caddx Vista HD System

BETAFPV X-Knight 5&quot Toothpick Quadcopter w/ Caddx Vista HD System


X-Knight 5'' Toothpick Quad (HD Digital VTX) is the first ultralight 6S toothpick drone with HD digital VTX released on BETAFPV! With this vista kit, pilots can get a long transmission range with stable and clear HD video. Featured with F4 35A AIO FC, brand-new 2004 motor, and HQ 5025 props, this toothpick drone is made in its best condition with insane flight power, supporting all kinds of FPV freestyle tricks, you will have fun with it!

Bullet Point


X-Knight 5'' Toothpick Quad (HD Digital VTX) equipped with Caddx Vista VTX, which can record 720P 120fps video. With this vista kit, the max range is up to 4 km, pilots can get a stable and clean HD video on the flight.
Equipped with BETAFPV brand-new 2004 1700KV motors and HQ 5025 propellers, X-Knight 5'' HD Digital VTX can be flight powerful, it supports kind of FPV freestyle tricks.
X-Knight 5'' Toothpick Quad (HD Digital VTX) is an ultralight 176.8g 6S toothpick drone. With the lightweight, this toothpick drone is made in its best condition with insane flight power.
Using 5'' toothpick frame V2 version, which adopts T800 carbon fiber material becomes ultimate durability while maintaining minimal weight 26.44g.

Highly recommended using the 550mAh 6S battery, it will give your drone more power and speed.  X-Knight 5'' HD Digital VTX can get 11 min smooth flight or 4min flight of FPV freestyle tricks with this battery.



Specification

Item: X-Knight 5'' Quad(HD Digital VTX)
Weight: 176.8g (without battery)
Power system: 6S
FC&ampESC: F4 35A AIO Brushless FC

Motors: 2004 1700KV Brushless Motors

Props: HQ 5025 3-Blade Props

HD Digital Camera &amp VTX: Caddx Vista

Battery: 550mAh 6S 75C Battery (Not included)
Frame: X-Knight Carbon Fiber 5'' V2 Frame Kit（T800）

Canopy: Canopy for Mini Camera V3

Receiver Option: Frsky FCC/Frsky LBT/TBS/PNP
Flight time: 11min smooth flight or 4min flight of FPV freestyle tricks with 550mAh 6S battery


Flight Controller
Toothpick F4 35A AIO Brushless FC - The board is the first BLHeli_32 ESC 35A All-in-one toothpick FC on the current market. It can handle 35A continuous current(40A burst) and provide with massive levels of performance capability, but it still maintains ultralight only 7g. In addition, this board supports a 2-6S Lipo battery, perfectly suitable for the 4''-5'' toothpick drone. 

Caddx Vista
The Caddx Vista HD digital video transmitter can work with DJI FPV camera, goggles, and remote controller. The total weight (with camera and antenna) is 35g only, about 20g lighter than the DJI FPV unit. Besides, it is smaller and designed to suit for whoop drones. With this vista kit, the max range is up to 4 kilometers. BETAFPV mini canopy V3  is suitable for the Caddx Vista greatly. With injection molded process and PE material. The canopy will perfectly protect the Caddx Vista camera.

Motors
2004 1700KV Brushless Motors is a lightweight 6S motor. It only weights 16.4g / 1pc. Best matched with the HQ 5025 3-Blade Props, the motor is very efficient in use and has an excellent racing flight experience. Combined with Toothpick 35A AIO Brushless FC, it will provide you enough output power.

X-Knight Carbon Fiber 5'' Frame V2 Kit
X-Knight Carbon Fiber 5'' V2 Frame Kit - Our first assembled 5'' frame kit, which adopts T800 carbon material becomes ultimate durability while maintaining minimal weight 26.44g. It consists of arms, bottom plate, and top plate, which allows you to replace the damaged part. Meanwhile, the top plate comes with press nuts to make the installation process easier.

FAQ

Cli Dump of X-knight 5'' Toothpick Quad  (HD Digital VTX) ( Click here to find the details.)

STL file for the RX holder


Package

1 * X-Knight 5'' Quad (HD Digital VTX)
1 * HQ 5025 3-Blade Props(2CW+2CCW)

1 * Set of M2*7 Screws

There are no batteries included in the package. High recommend the 550mAh 6S 75C Battery.

X-Knight 5'' Toothpick Quad (HD Digital VTX) is the first ultralight 6S toothpick drone with HD digital VTX released on BETAFPV! With this vista kit, pilots can get a long transmission range with stable and clear HD video. Featured with F4 35A AIO FC, brand-new 2004 motor, and HQ 5025 props, this toothpick drone is mad

X-Knight 5'' Toothpick Quad  (HD Digital VTX)

Vanover

Vanover BNF Vannystyle Pro TrueX 5" Drone - ELRS

WREKD Co.

A high-performance FPV drone built and tuned by the team at WREKD Co. It can take 2 to 10 days to build depending on time of year. Usually ships quickly!
Contact the team at support@wrekd.com with any questions or requests.
This is a custom built, tuned, and up to date high performance drone that comes with the latest and greatest hardware, including ELRS and your choice of video transmission tech. Knowledge of Betaflight and experience with flying FPV and the hobby is required.
Requirements


Requires an ELRS Radio or Module

Transmitter or Radio Module.

Requires an HDZERO VRX (Video Receiver) Built-in to Goggles or attached to FPV Goggles.- or - Analog Video Receiver built-in or attached to FPV Goggles

Intermediate to Expert level skill in flying high-speed 6S quadcopters.
A lot of space to fly, open field.
Suggested: A basic understanding of configuring Betaflight modes to match your radio.
DO NOT FLY AROUND PEOPLE.

Configuration
Your freestyle drone comes pre-configured and tuned.
Here are some highlights:

Motors rotating out "Props Out" to prevent snags on trees and to prevent grass in the camera.
Tuned for Smooth Yet Snappy Freestyle
Preset loaded for ELRS (500Hz)

Specifications

Flight Controller: Hobbywing F7 Flight Controller

ESC: Hobbywing 65A ESC

Motors: VCI 2306 1850Kv or 1950Kv

VTX: DJI O3 VTX or HDZERO Freestyle V2 VTX or Foxeer Extreme 2.5W Analog VTX


Camera: DJI O3 Camera or HDZERO Nano 90 or Foxeer Predator Nano Analog Camera
Props: 2 Packs of HQ Juicy J37 4.9x3.7x3 Props


Includes

1 x Vannystyle Pro Built &amp Tuned Freestyle Drone Ready-to-bind to Your Radio




2 x Packs of HQ Juicy J37 4.9x3.7x3 Props




A high-performance FPV drone built and tuned by the team at WREKD Co. It can take 2 to 10 days to build depending on time of year. Usually ships quickly! Contact the team at support@wrekd.com with any questions or requests. This is a custom built, tuned, and up to date high performance drone that comes with the latest 

Vannystyle Pro (TrueX) 5" Built & Tuned FPV Drone w/ ELRS - Choose Options

Vannystyle Pro (TrueX) 5" Built & Tuned FPV Drone w/ ELRS - Choose Opt

Vanover BNF Vannystyle Pro Squish 5" Drone - ELRS

Vannystyle Pro (Squish) 5" Built & Tuned FPV Drone w/ ELRS - Choose Options

Vannystyle Pro (Squish) 5" Built & Tuned FPV Drone w/ ELRS - Choose Op

Vanover BNF Vannystyle Original 5" Drone - ELRS

A high-performance FPV drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on time of year. Usually ships quickly!
This is a custom, tuned, and up to date high performance drone that comes with the latest and greatest hardware, including ELRS and your choice of video transmission tech.
Requirements


Requires an ELRS Radio or Module


Transmitter or Radio Module.


Requires an HDZERO VRX (Video Receiver) Built-in to Goggles or attached to FPV Goggles.- or - Analog Video Receiver built-in or attached to FPV Goggles


Intermediate to Expert level skill in flying high-speed 6S quadcopters.


A lot of space to fly, open field.

Suggested: A basic understanding of configuring Betaflight modes to match your radio.
DO NOT FLY AROUND PEOPLE.

Configuration
Your freestyle drone comes pre-configured and tuned.
Here are some highlights:

Motors rotating out "Props Out" to prevent snags on trees and to prevent grass in the camera.
Tuned for Smooth Yet Snappy Freestyle
Preset loaded for ELRS (500Hz)

Specifications

Flight Controller: Hobbywing F7 Flight Controller

ESC: Hobbywing 65A ESC

Motors: VCI 2306 1850Kv or 1950Kv

VTX: 
 DJI O3 VTX or HDZERO Freestyle V2 VTX or Foxeer Extreme 2.5W Analog VTX
Camera: DJI O3 Camera or HDZERO Nano 90 or Foxeer Predator Nano Analog Camera
Props: 
2 Packs of HQ Juicy J37 4.9x3.7x3 Props


Includes

1 x WREKD Built &amp Tuned Freestyle Drone Ready-to-bind to Your Radio


2 x Packs of HQ Juicy J37 4.9x3.7x3 Props




A high-performance FPV drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on time of year. Usually ships quickly! This is a custom, tuned, and up to date high performance drone that comes with the latest and greatest hardware, including ELRS and your choice of video transmission 

Vannystyle Original 5" Built & Tuned FPV Drone w/ ELRS - Choose Options

Vannystyle Original 5" Built & Tuned FPV Drone w/ ELRS - Choose Option

VROOM

VROOM BNF Comet Pro 5" Racing Drone - HDZero, ELRS

You&#39re ordering a high-performance FPV racing drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on how busy we are. Usually ships quickly!
This is a custom, tuned, and up to date high performance racing drone that comes with the latest and greatest hardware.

Electronics, Motors, etc. may not be exactly as pictured.
Requirements


Requires an ELRS Radio or Module


Transmitter or Radio Module.


Requires an HDZERO VRX (Video Receiver) built-in or attached to FPV Goggles.


Intermediate to Expert level skill in flying high-speed 6S quadcopters.


A lot of space to fly, open field.

Suggested: A basic understanding of configuring Betaflight modes to match your radio.
DO NOT FLY AROUND PEOPLE.

Configuration
Your racing drone comes pre-configured and tuned.
Here are some highlights:

Motors rotating out &quotProps Out&quot to prevent snags on gates.
Tuned for Racing
Preset loaded for ELRS (500Hz)

Specifications

Flight Controller: Hobbywing F7 20x20 Flight Controller
ESC:  Hobbywing 40A/45A 20x20 Flight Controller

Motors: Vulcan Spark PRO 2207 (1950Kv / 2100Kv)
VTX: HDZERO Race V3
Camera: HDZERO Nano 90
Props: HQ Prop R30 NEW!

Includes

1 x Pre-built, configured and tested Comet Pro Racing Drone ready to bind to your receiver and fly.
2 x Packs of HQ Prop R30 Racing Props


You're ordering a high-performance FPV racing drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on how busy we are. Usually ships quickly! This is a custom, tuned, and up to date high performance racing drone that comes with the latest and greatest hardware. Electronics, Motors,

VROOM Comet Pro 5" WREKD Built & Tuned FPV Racing Drone w/ ELRS & HDZERO from WREKD Co.

VROOM Comet Pro 5

VROOM Comet Pro 5" WREKD Built & Tuned FPV Racing Drone w/ ELRS & HDZERO

You're ordering a high-performance FPV racing drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on how busy we are. Usually ships quickly!
This is a custom, tuned, and up to date high performance racing drone that comes with the latest and greatest hardware.

Electronics, Motors, etc. may not be exactly as pictured.
Requirements


Requires an ELRS Radio or Module


Transmitter or Radio Module.


Requires an HDZERO VRX (Video Receiver) built-in or attached to FPV Goggles.


Intermediate to Expert level skill in flying high-speed 6S quadcopters.


A lot of space to fly, open field.

Suggested: A basic understanding of configuring Betaflight modes to match your radio.
DO NOT FLY AROUND PEOPLE.

Configuration
Your racing drone comes pre-configured and tuned.
Here are some highlights:

Motors rotating out "Props Out" to prevent snags on gates.
Tuned for Racing
Preset loaded for ELRS (500Hz)

Specifications

Flight Controller: Hobbywing F7 20x20 Flight Controller
ESC:  Hobbywing 40A/45A 20x20 Flight Controller

Motors: Vulcan Spark PRO 2207 (1950Kv / 2100Kv)
VTX: HDZERO Race V3
Camera: HDZERO Nano 90
Props: HQ Prop R30 NEW!

Includes

1 x Pre-built, configured and tested Comet Pro Racing Drone ready to bind to your receiver and fly.
2 x Packs of HQ Prop R30 Racing Props


VROOM Comet Pro 5" WREKD Built & Tuned FPV Racing Drone w/ ELRS & HDZE

VROOM Comet Pro 5" Racing Drone - Analog VTX, ELRS

Electronics, Motors, etc. may not be exactly as pictured.
You&#39re ordering a high-performance FPV racing drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on how busy we are. Usually ships quickly!
This is a custom, tuned, and up to date high performance racing drone that comes with the latest and greatest hardware.
Requirements


Requires an ELRS Radio or Module


Transmitter or Radio Module.


Requires an Analog Video Receiver built-in or attached to FPV Goggles.


Intermediate to Expert level skill in flying high-speed 6S quadcopters.


A lot of space to fly, open field.

Suggested: A basic understanding of configuring Betaflight modes to match your radio.
DO NOT FLY AROUND PEOPLE.

Configuration
Your racing drone comes pre-configured and tuned.
Here are some highlights:

Motors rotating out &quotProps Out&quot to prevent snags on gates.
Tuned for Racing
Preset loaded for ELRS (500Hz)

Specifications

Flight Controller: Hobbywing F7 20x20 Flight Controller
ESC:  Hobbywing 40A/45A 20x20 Flight Controller

Motors: Vulcan Spark PRO 2207 (1950Kv / 2100Kv)
VTX: Foxeer Reaper Nano
Camera: Foxeer Predator 5 Nano
Props: HQ Prop R30 NEW!

Includes

1 x Pre-built, configured and tested Comet Pro Racing Drone ready to bind to your receiver and fly.
2 x Packs of HQ Prop R30 Racing Props


Electronics, Motors, etc. may not be exactly as pictured. You're ordering a high-performance FPV racing drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on how busy we are. Usually ships quickly! This is a custom, tuned, and up to date high performance racing drone that comes w

VROOM Comet Pro 5" WREKD Built & Tuned FPV Racing Drone w/ ELRS & Analog from WREKD Co.

VROOM Comet Pro 5" WREKD Built & Tuned FPV Racing Drone w/ ELRS & Analog

Electronics, Motors, etc. may not be exactly as pictured.
You're ordering a high-performance FPV racing drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on how busy we are. Usually ships quickly!
This is a custom, tuned, and up to date high performance racing drone that comes with the latest and greatest hardware.
Requirements


Requires an ELRS Radio or Module


Transmitter or Radio Module.


Requires an Analog Video Receiver built-in or attached to FPV Goggles.


Intermediate to Expert level skill in flying high-speed 6S quadcopters.


A lot of space to fly, open field.

Suggested: A basic understanding of configuring Betaflight modes to match your radio.
DO NOT FLY AROUND PEOPLE.

Configuration
Your racing drone comes pre-configured and tuned.
Here are some highlights:

Motors rotating out "Props Out" to prevent snags on gates.
Tuned for Racing
Preset loaded for ELRS (500Hz)

Specifications

Flight Controller: Hobbywing F7 20x20 Flight Controller
ESC:  Hobbywing 40A/45A 20x20 Flight Controller

Motors: Vulcan Spark PRO 2207 (1950Kv / 2100Kv)
VTX: Foxeer Reaper Nano
Camera: Foxeer Predator 5 Nano
Props: HQ Prop R30 NEW!

Includes

1 x Pre-built, configured and tested Comet Pro Racing Drone ready to bind to your receiver and fly.
2 x Packs of HQ Prop R30 Racing Props


VROOM Comet Pro 5" WREKD Built & Tuned FPV Racing Drone w/ ELRS & Anal

iFlight BNF Nazgul Evoque F4D 4" Deadcat HD Quad -DJI O3 Air Unit, ELRS 2.4GHz












Pre-Orders shipping ASAP! 
iFlight&#39s Nazgul Evoque F4D 6S 4&quot w/DJI O3 Air Unit &ampamp Micro Cam - ELRS 2.4GHz is a top-tier BNF drone. Another breakthrough in FPV visuals from DJI with iFlight&#39s upgraded frame and electronics. A new standard in Bind-And-Fly drones. The F4D has been designed to be effective at cinematic capture by excluding props from view. With a 2205 motor, this frame will have plenty of thrust to give you a strong and snappy responsive feel. 
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!












Features


Latest Nazgul Frame for Maximum Protection
The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.


DJI O3 HD Air Unit Low-Latency digital transmission
Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)


4K Stabilized Video with 155° Ultra-Wide Angle
Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)


Secured Battery Plug with Anti-Spark Filter
Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.


 Specifications

Frame: Evoque F4D 

FC: BLITZ Mini F7 Flight Controller

ESC: BLITZ Mini E55S 4-IN-1 2-6S 55A ESC

Video Transmission: DJI O3 Air Unit

Frame wheelbase: 185mm

Motor: XING2 2205 motors
Prop: HQ 4x3x3 propellers

Takeoff Weight: Approx. 330 g (Without battery)

Dimensions (L×W×H): 149×110×36 mm(Deadcat)

Diagonal Distance: 185 mm

Max Speed: 170 Km/h (Manual Mode)

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 8 mins

Max Flight Distance: 5 km

Max Wind Speed Resistance: Level 5

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: DJI O3 Air Unit Dual-Band Antenna

Video Transmission Specifications
Product Name: DJI O3 Air Unit

Communication Bandwidth: Max 40 MHz
FOV (single screen): 155°
Communication Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A

Includes

1x iFlight BNF Nazgul Evoque F4D 4&quot Deadcat HD 6S Quad w/DJI O3 Air Unit &ampamp Micro Cam - ELRS 2.4GHz

1x Battery Pad


2x HQ 4x3x3 Propeller 4 Pack

2x Battery Strap


Pre-Orders shipping ASAP! iFlight's Nazgul Evoque F4D 6S 4" w/DJI O3 Air Unit &amp; Micro Cam - ELRS 2.4GHz is a top-tier BNF drone. Another breakthrough in FPV visuals from DJI with iFlight's upgraded frame and electronics. A new standard in Bind-And-Fly drones. The F4D has been designed to be effective at cinematic c

iFlight BNF Nazgul Evoque F4D 4" Deadcat HD 6S Quad w/DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz from WREKD Co.

iFlight BNF Nazgul Evoque F4D 4

iFlight BNF Nazgul Evoque F4D 4" Deadcat HD 6S Quad w/DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

IFLIGHT












iFlight's Nazgul Evoque F4D 6S 4" w/DJI O3 Air Unit &amp Micro Cam - ELRS 2.4GHz is a top-tier BNF drone. Another breakthrough in FPV visuals from DJI with iFlight's upgraded frame and electronics. A new standard in Bind-And-Fly drones. The F4D has been designed to be effective at cinematic capture by excluding props from view. With a 2205 motor, this frame will have plenty of thrust to give you a strong and snappy responsive feel. 
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!












Features


Latest Nazgul Frame for Maximum Protection
The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.


DJI O3 HD Air Unit Low-Latency digital transmission
Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)


4K Stabilized Video with 155° Ultra-Wide Angle
Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)


Secured Battery Plug with Anti-Spark Filter
Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.


 Specifications

Frame: Evoque F4D 

FC: BLITZ Mini F7 Flight Controller

ESC: BLITZ Mini E55S 4-IN-1 2-6S 55A ESC

Video Transmission: DJI O3 Air Unit

Frame wheelbase: 185mm

Motor: XING2 2205 motors
Prop: HQ 4x3x3 propellers

Takeoff Weight: Approx. 330 g (Without battery)

Dimensions (L×W×H): 149×110×36 mm(Deadcat)

Diagonal Distance: 185 mm

Max Speed: 170 Km/h (Manual Mode)

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 8 mins

Max Flight Distance: 5 km

Max Wind Speed Resistance: Level 5

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: DJI O3 Air Unit Dual-Band Antenna

Video Transmission Specifications
Product Name: DJI O3 Air Unit

Communication Bandwidth: Max 40 MHz
FOV (single screen): 155°
Communication Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A

Includes

1x iFlight BNF Nazgul Evoque F4D 4" Deadcat HD 6S Quad w/DJI O3 Air Unit &amp Micro Cam - ELRS 2.4GHz

1x Battery Pad


2x HQ 4x3x3 Propeller 4 Pack

2x Battery Strap


iFlight's Nazgul Evoque F4D 6S 4" w/DJI O3 Air Unit &amp; Micro Cam - ELRS 2.4GHz is a top-tier BNF drone. Another breakthrough in FPV visuals from DJI with iFlight's upgraded frame and electronics. A new standard in Bind-And-Fly drones. The F4D has been designed to be effective at cinematic capture by excluding props 

iFlight BNF Nazgul Evoque F4D 4" Deadcat HD 6S Quad w/DJI O3 Air Unit 

GEPRC BNF Mark5 HD 5" Quad - DJI O3, 2.4GHz ELRS

Pre-Orders shipping ASAP!
The HD VTX ushered in a new upgrade, and the brand new VTX of the DJI O3 air unit pushed the digital system to a new level. The GEPRC team is also upgrading and optimizing the overall performance based on MARK5. At the same time, it will be equipped with a DJI O3 air unit to design the new MARK5 O3 version.
The newly upgraded camera aluminum alloy side plate, 7075-T6 aluminum alloy is strong and durable. It can be fully adapted to DJI’s new O3 air unit camera, with a field of view (FOV) of 155°, and the recording specification can support up to 4K 60FPS. We also specially designed TPU fixing parts for the O3 VTX module and equipped it with an air inlet cooling port, which is conducive to adequate heat dissipation at the air unit. MARK5 O3 uses GEPRC’s latest SPAN F722-BT-HD V2 stack, with ICM 42688P gyroscope for smooth flight, redundant performance, and ports, and supports Bluetooth wireless connection for tuning. The SPAN BLHeli_32 50A ESC with GEPRC 2107.5 motor, and uses new Gemfan 5136 propellers, which has strong power. MARK5 O3 is shipped with two different camera mounts, which can be mounted with a full range of GoPro action cameras, as well as Naked GoPro 8/10, Insta 360 GO2 and Caddx Peanut, etc. to record beautiful moments for your flight.This time, MARK5 O3 will broaden your horizons, fly beyond what you have ever seen, and bring more possibilities for FPV creation.
Features

Upgraded lens aluminum alloy side plate, durable and more visual impact
Built-in Bluetooth, supports mobile phone wireless connection for parameter tuning
Developed specifically for freestyle with a squashed X arm design.
The HD version uses DJI’s new O3 VTX, clear image, stable signal, low-latency, long-distance, and supports up to 4K/60fps recording
SPAN G50A BLHeli_32 4in1 50A ESC with the latest GEPRC 2107.5 motor, with strong power, fast response speed, precise throttle control, and smooth flight experience
Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment
With an independent capacitor and buzzer cabin, the operating environment of the whole drone is extremely stable, no shaking, no jitter
Two kinds of 3D printing camera mounts are designed, which can be mounted with a full range of GoPro cameras, as well as Naked GoPro 8, Insta 360 GO2 and Caddx Peanut cameras. The shooting effect is stable and clear
Add coral orange and emerald green colors to the O3 version to add more colors to your flight
MARK5 O3 is optimized for freestyle, with a smoother flight experience


Specifications

Model: MARK5 HD O3 Quadcopter
Brand: GEPRC
Frame: GEP-MK5 O3
Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm plate: 5mm
FC system: SPAN F722-BT-HD V2
MCU: STM32F722
Gyro: 42688-P(SPI)
OSD: BetaFlight OSD w/AT7456E chip
ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC
VTX: DJI O3 Air Unit
Camera: DJI O3
Propeller: Gemfan 5136
Antenna: DJI O3 antenna
Motor: SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV（4S Version）
Weight: 404.9g (MARK5 HD O3 including 3D printed parts)
Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G
Recommended Battery: LiPo 4S 1300mAh-1800mAh (4S Version) / LiPo 6S 1050mAh-1550mAh(6S Version)

Includes

1x MARK5 HD O3 Quadcopter
4x Gemfan 5136 propellers (pair)
1x Battery strap M15x250mm
2x Battery strap M20x220mm
2x Battery Silicone Pads
1x 3D printed parts
1x Action cam mount holder
1x Set of screws
1x Set of screwdrivers
1x Antenna fixed tube


Pre-Orders shipping ASAP! The HD VTX ushered in a new upgrade, and the brand new VTX of the DJI O3 air unit pushed the digital system to a new level. The GEPRC team is also upgrading and optimizing the overall performance based on MARK5. At the same time, it will be equipped with a DJI O3 air unit to design the new MAR

(PRE-ORDER) GEPRC BNF Mark5 HD 6S 5" Quad w/ DJI O3 Air Unit - ELRS 2.4GHz

(PRE-ORDER) GEPRC BNF Mark5 HD 6S 5" Quad w/ DJI O3 Air Unit - ELRS 2.

EMAX

EMAX BNF/PNP Hawk Apex 5" HDZero Quadcopter

Emax USA

 


THIS PRODUCT REQUIRES HDZERO VIDEO RECEIVER FOR USE: HDZero VRX 



Motor: ECO II 2004
Propeller: Avia 5030 Tri-blade

Weight (excluding battery): 167g
AIO: STM32F722 + 4 IN 1 25A ESC
VTX: HDZero Whoop VTX 
Camera: Runcam Nano HDZero
VTX Antenna: EMAX Nano Antenna UFL
BNF Variant Receiver: EMAX ExpressLRS RX
Recommended Battery: 4S XT30
 

  THIS PRODUCT REQUIRES HDZERO VIDEO RECEIVER FOR USE: HDZero VRX  Motor: ECO II 2004 Propeller: Avia 5030 Tri-blade Weight (excluding battery): 167g AIO: STM32F722 + 4 IN 1 25A ESC VTX: HDZero Whoop VTX  Camera: Runcam Nano HDZero VTX Antenna: EMAX Nano Antenna UFL BNF Variant Receiver: EMAX ExpressLRS RX Recommended 

Hawk Apex 5 Inch HDZero Ultralight Racing Drone from WREKD Co.

Hawk Apex 5 Inch HDZero Ultralight Racing Drone

Improvement requires evolution, changing the status quo, and forming new normals. In our constant quest for self-improvement, a new meta has been formed through the Hawk Apex. In a game of predator and prey, every movement counts and every engineered detail plays a role. In a high stakes race, the ability to see clearl

Emax Hawk Apex 5

iFlight BNF Nazgul Evoque F5X HD 5" Squashed X Quadcopter

Our best pre-built drone just got better! Another breakthrough in FPV visuals from DJI with our upgraded frame and electronics. A new standard of Bind-And-Fly drones that are simple to get started with but the durability and performance for enthusiasts. Welcome to the iFlight experience!  Check out all our Digital BNF/

iFlight Nazgul Evoque F5X V2 6S Squashed-X Geometry w/ DJI O3 HD Camera System - Choose Version

iFlight BNF Nazgul Evoque F5D HD 5" Deadcat Quadcopter

iFlight Nazgul Evoque F5D V2 6S Deadcat Geometry w/ DJI O3 HD Camera System - Choose Version

Hyperlite

Hyperlite BNF Freerange HD 5" Freestyle Quadcopter

Introducing the Hyperlite Freerange 5'' LR Freestyle frame! This frame is a culmination of months of extensive testing by our team and our knowledge gained from years of racing. The main design follows the basic layout cues and engineering that have made Hyperlite frames one of the most widely used in the hobby.  As wi

Hyperlite Freerange 5

Introducing the Hyperlite Freerange 5'' LR Freestyle frame AirX Edition! This frame is made in collaboration with our friends at AirX Machina in two beautiful new colors. First is AirX's red anodized mid plate with our Seal Grey TPU accessories. And we also now have available a Gun Metal anodized mid plate with our Pyr

Foxeer

Foxeer BNF Caesar Analog 5" Racing Quadcopter

Introducing the new Caesar 5" Racing Drone from Foxeer. It uses high performance T700 carbon for increased stiffness and vibration reduction as well as Foxeer's famously durable Reaper electronics allowing you to reduce your filtering giving you reduced latency for that locked in racing feel. Pick up yours today! ﻿Note

Foxeer Caesar 5

GEPRC BNF GEP-MK5 Mark5 HD 5" Quadcopter

Recommend GEPRC Storm 1550mAh Battery for MARK5 4S Version
Recommend GEPRC Storm 1400mAh Battery for MARK5 6S Version
Note: From August 18, 2023, any purchase of a 5-inch drone will receive a free pack of 5040 propellers in random colors.

Recommend GEPRC Storm 1550mAh Battery for MARK5 4S Version Recommend GEPRC Storm 1400mAh Battery for MARK5 6S Version Note: From August 18, 2023, any purchase of a 5-inch drone will receive a free pack of 5040 propellers in random colors.

GEPRC MARK5 HD DJI AIR UNIT Freestyle FPV Drone - GEPRC

GEPRC MARK5 HD DJI AIR UNIT Freestyle FPV Drone

GEPRC MARK5 HD Vista Freestyle FPV Drone - GEPRC

GEPRC MARK5 HD Vista Freestyle FPV Drone

The GEPRC BNF Mark5 HD Quad w/ DJI Camera is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce we

GEPRC BNF Mark5 HD 5

iFlight BNF TITAN XL5 HD 5" Quadcopter

The TITAN XL5 w/ DJI Air Unit BNF features the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. Equipped with iFlight's latest SucceX-D F7 (50A 4-in-1 ESC) Stack and the popular XING motors. Everything you need  just bind-and-fly! Check out the Variable GoPro TPU Mount for this frame. After ou