FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

GEPRC

GEPRC BNF CineLog35 V2 Analog 3.5" Cinewhoop - 2.4GHz ELRS, GPS

Gathering the experience and evolution of the GEPRC team in all aspects, CineLog35 V2 is finally launched to the market with better performance. CineLog35 v2 version integrated with O3 VTX. The CineLog35 V2 version of the main carbon plate and injection protection frame increased the 7075 aluminum column for structural

GEPRC CineLog35 V2 Analog GPS 3.5



















Experience unrivaled performance with the GEPRC CineLog35 V2 6S 3.5" Cinewhoop. This powerful model features an analog &amp micro cam, as well as ELRS 2.4GHz technology, for streamlined flight capabilities and less chance of a fail safe. Fly with confidence as you capture flawless footage with every launch.








Check out our other pre-built quads, as well as the rest of our GEPRC selection.


















Features

New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent.
Adopts the GEP F722-45A AIO V2 high performance flight controller.
SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel.

Power cable using XT60E1-M plug and carbon plate integrated design, convenient application.
Battery installation method using a tie with 7075 aluminum parts fixed, solid and stable.
Carefully tuned 3.5-inch cinematic FPV quad with flexible and delicate flight feeling.
Pre-Installed with a M8U GPS



 


Specifications

Model: Cinelog35 V2 Analog

Frame: GEP-CL35 V2

Wheelbase: 142mm

Gimbal Plate: 2.0mm

Top Plate: 3.5mm

Bottom Plate: 1.5mm

FC system: GEP-F722-45A AIO V2

MCU: STM32F722RET6

Gyro: ICM 42688-P

OSD: Betaflight OSD w/AT7456E chip

ESC: 8Bit 45A

VTX: GEPRC RAD 1W(UFL)

Camera: Caddx Ratel2

Antenna: GEPRC Peano 5.8 RHCP UFL

Motor: SPEEDX2 2105.5-2150KV (6S)

Propeller: HQProp D-T90MM

GPS: GEP-M8U

Receiver: ELRS2.4G

Weight: 262g
Recommended battery: LiPo 1050mah-1300mah

Flight time: 5′00″ - 8′ 30″

Includes

1x GEPRC BNF CineLog35 V2 Analog 6S 3.5" Cinewhoop - ELRS 2.4GHz (GPS)
2x HQProp D-T90MM（2 pairs）

2x M20 x 250mm battery strap

2x Battery Silicone Pads

1x Set of screws

1x L-shaped screwdriver (1.5mm)

1x L-shaped screwdriver (2mm)

1x L-shaped screwdriver (3mm)

1x M5 wrench

1x plastic tweezers

1x Antenna fixed tube (pair)

1x Keychain

1x GP Camera Mounting Base

1x Naked GP Camera Mounting Base

1x Antenna Mounting Base


Experience unrivaled performance with the GEPRC CineLog35 V2 6S 3.5" Cinewhoop. This powerful model features an analog &amp; micro cam, as well as ELRS 2.4GHz technology, for streamlined flight capabilities and less chance of a fail safe. Fly with confidence as you capture flawless footage with every launch. Check out 

GEPRC BNF CineLog35 V2 Analog 6S 3.5" Cinewhoop - ELRS 2.4GHz (GPS) from WREKD Co.

GEPRC BNF CineLog35 V2 Analog 6S 3.5

GEPRC BNF CineLog35 V2 Analog 6S 3.5" Cinewhoop - ELRS 2.4GHz (GPS)

Recommended GEPRC Storm 6S 1300mAh 120C Lipo Battery for CineLog35 V2.

GEPRC CineLog35 V2 Analog FPV Drone - GEPRC

GEPRC CineLog35 V2 Analog FPV Drone

Pre-Built Quad Kit Type

Pre-Built Quads and Kits

Quad Frame Size

Quad Type

GEPRC BNF CineLog 30 HD 3" Cinewhoop

1.Newly Lightweight Design

The new design made the drone smaller and lighter. The most of important, CineLog30 can take off with 4s 660mah battery only 222.5 grams

2.Newly Noise Reduction Design
Unique noise reduction design can make CinLog30 noise much less than another Whoop Quadcopter

3.Carrying HD Digital VTX And Newly FPV Camera
Making video more clear and the perfect night vision images. Let you get a great flight experience.

4.Customized Mounting base
Perfectly suitable for naked camera GP8 and INSTA 360 GO2 camera

5.Upgrade Platform Design
Make the shooting and recording effect more stable

6.Backward Push Design
Bring higher flexibility, more stable freestyle flight experience and better shock absorption ability.

7.New personalized color matching
Show your difference

1.Newly Lightweight Design  The new design made the drone smaller and lighter. The most of important, CineLog30 can take off with 4s 660mah battery only 222.5 grams  2.Newly Noise Reduction Design Unique noise reduction design can make CinLog30 noise much less than another Whoop Quadcopter  3.Carrying HD Digital VTX And Newly FPV Camera Making video more clear and the perfect night vision images. Let you get a great flight experience.  4.Customized Mounting base Perfectly suitable for naked camera GP8 and INSTA 360 GO2 camera  5.Upgrade Platform Design Make the shooting and recording effect more stable  6.Backward Push Design Bring higher flexibility, more stable freestyle flight experience and better shock absorption ability.  7.New personalized color matching Show your difference

GEPRC CineLog30 HD w/ Runcam Link Wasp Digital HD System - GEPRC

GEPRC CineLog30 HD w/ Runcam Link Wasp Digital HD System

Developed from the Cinelog25, the GEPRC CineLog30 is a dream of a pusher quad with incredibly stable HD video. It's perfect for carrying a Naked GoPro, SMO, or other actions cameras and is capable of freestyle or cinematic flight.  Built on the new ultra light and durable GEP-CL30 frame, it features more powerful 1404 

GEPRC BNF CineLog 30 HD 3

Developed by GEPRC, the CineLog30 is one of the best sub-250g FPV pusher drones in the current market! Analog and HD versions are available!

GEPRC CineLog 30 3" 4S HD CineWhoop Drone w/ Caddx Polar Vista 

GEPRC CineLog 30 3&quot 4S HD CineWhoop Drone w/ Caddx Polar Vista 

GEPRC BNF CineLog 35 Performance Analog 3.5" Quadcopter

Recommended GEPRC 6S 1550mAh Li-HV Battery for CineLog35 Performance

GEPRC CineLog35 Performance Analog FPV Drone - GEPRC

GEPRC CineLog35 Performance Analog FPV Drone

The CineLog35 Performance version is now released in three versions: VISTA Nebula PRO,AVATAR HD 1080P and Analog version. There are also 4 receiver options. The CineLog35 Performance version is optimized and upgraded based on the standard version. The CineLog35 is designed with lighter weight and longer endurance. The 

GEPRC CineLog35 Performance Edition 3.5

The CineLog35 Performance version RTF is optimized and upgraded based on the standard version. The CineLog35 is designed with lighter weight and longer endurance, and the concept of the Performance version is to maximize Racing performance and achieve perfection with the existing frame size.

The CineLog35 Performance version RTF is optimized and upgraded based on the standard version. The CineLog35 is designed with lighter weight and longer endurance, and the concept of the Performance version is to maximize Racing performance and achiev

GEPRC CineLog 35 P 3.5" Cinewhoop Drone Analog w/ Caddx Ratel 2 - Performance Edition - 6S 

GEPRC CineLog 35 P 3.5&quot Cinewhoop Drone Analog w/ Caddx Ratel 2 - Performance Edition - 6S 

The CineLog35 Performance version is now released in two versions: Runcam Link Wasp and Analog version. There are also 3 receiver options. The CineLog35 Performance version is optimized and upgraded based on the standard version. The CineLog35 is designed with lighter weight and longer endurance. The concept of the Per

EMAX

EMAX BNF/ PNP Hawk Apex 3.5" HDZero Quadcopter

Emax USA

 


THIS PRODUCT REQUIRES HDZERO VIDEO RECEIVER FOR USE: HDZero VRX 

Wheelbase: 162mm
Motor: ECO II 2004 3000kv
Propeller: Avia 3630 Tri-blade
Weight (excluding battery): 167g
AIO: STM32F722 + 4 IN 1 25A ESC
VTX: HDZero Whoop VTX 
Camera: Runcam Nano HDZero
VTX Antenna: EMAX Nano Antenna UFL
BNF Variant Receiver: EMAX ExpressLRS RX
Recommended Battery: 4S XT30

  THIS PRODUCT REQUIRES HDZERO VIDEO RECEIVER FOR USE: HDZero VRX  Wheelbase: 162mm Motor: ECO II 2004 3000kv Propeller: Avia 3630 Tri-blade Weight (excluding battery): 167g AIO: STM32F722 + 4 IN 1 25A ESC VTX: HDZero Whoop VTX  Camera: Runcam Nano HDZero VTX Antenna: EMAX Nano Antenna UFL BNF Variant Receiver: EMAX Ex

Hawk Apex 3.5 Inch HDZero Ultralight Racing Drone from WREKD Co.

Hawk Apex 3.5 Inch HDZero Ultralight Racing Drone

Improvement requires evolution, changing the status quo, and forming new normals. In our constant quest for self-improvement, a new meta has been formed through the Hawk Apex. In a game of predator and prey, every movement counts and every engineered detail plays a role. In a high stakes race, the ability to see clearl

Emax Hawk Apex 3.5

EMAX Apex 3.5 Inch HDZero Ultralight Racing Drone PNP ELRS

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

EMAX Apex 3.5 Inch HDZero Ultralight Racing Drone PNP ELRS - RMRC

T-Motor

T-Motor PNP Feather 120 3" Quadcopter

Introducing T-Motor's Feather120! An ultralight 3" toothpick style drone that is great for indoor freestyle or racing!  By using three inch props and reducing weight wherever possible (only 31.5g without battery) T-Motor has managed to keep this drone super quiet which makes this quad great for flying around people wit

T-Motor Feather120 Ultralight 3

EMAX BNF BabyHawk II HD 3.5" Quadcopter

Emax BabyHawk HD D8 Compatible Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesD8 Compatible BNFFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone FrSky D8 shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone FrSky D8 - RMRC

Babyhawk II HD 3.5&quot Micro Polar DJI FPV Drone FrSky D8

Emax Babyhawk II HD Digital BNF reinventing FPV! Now available with the Nebula Pro camera! Check out our entire Emax Babyhawk II Collection, all our Digital BNF PNP RTFs and the rest of our Emax Products! For the ultimate lightweight HD footage add on the Insta360 GO 2 and 3D Printed mount! Recommended Battery: 850mAh 

Emax Babyhawk II HD Digital BNF w Caddx Vista + Nebula Pro Camera - Choose Receiver

BABYHAWK II HD REQUIRES DJI DIGITAL HD FPV SYSTEM GOGGLES FOR VIDEO TRANSMISSION, BABYHAWK II HD IS NOT COMPATIBLE WITH STANDARD 5.8GHZ ANALOG VIDEO RECEIVER. FOR ANALOG PLEASE SEE BABYHAWK II ANALOG VARIANT.   Optional 3D Printable Files: GoPro Mount GoPro Seat Insta360 Go Mount  Polar Camera Mount Standoffs  

Babyhawk II HD - 3.5

Emax BabyHawk HD TBS Crossfire Nano Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesTBS Crossfire Compatible BNFFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone TBS Crossfire Nano shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone TBS Crossfire Nano - RMRC

Babyhawk II HD 3.5&quot Micro DJI FPV Drone TBS Crossfire Nano

The Babyhawk II HD RTF is a superior and powerful drone that offers great performance and amazing HD video quality all in a 250g aircraft!  ow with Caddx Vista Polar.

EMAX BabyHawk II HD 3.5" Freestyle RTF w/ Caddx Polar Vista

EMAX BabyHawk II HD 3.5&quot Freestyle RTF w/ Caddx Polar Vista

Emax BabyHawk HD PNP Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone PNP shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone PNP - RMRC

Babyhawk II HD 3.5&quot Micro DJI CADDX Polar Vista FPV Drone PNP

The Babyhawk II HD RTF is a superior and powerful drone that offers great performance and amazing HD video quality all in a 250g aircraft!  

EMAX BabyHawk II HD Freestyle RTF w/ Caddx Nebula Pro Digital HD System

Happymodel

Happymodel BNF Crux3 3" Quadcopter

The Happymodel Crux3 ELRS 1S Toothpick is an excellent micro racing drone that comes with the Crazybee flight controller, EX1202.5 brushless motors, ELRS, and the Caddx Ant Camera to give you a great flying experience! Note: Action Cameras are not included. Update log: The Crux3 1S ELRS v2.0 version comes with ELRS F4 

Happymodel Crux3 ELRS 1S Toothpick FPV Racing Drone - ELRS 2.4GHz BNF

The Crux3 1-2S Toothpick by Happymodel is an excellent micro racing drone that comes with the Crazybee AIO 4-in-1 flight controller, 1202.5 brushless motors, and the Caddx Ant Camera to give you a great flying experience!

Happymodel Crux3 1-2S Toothpick FPV Racing Drone - BNF

BetaFPV

BetaFPV BNF Pavo30 3" Cinewhoop

Pavo30 whoop quadcopter, a new concept of 3-inch pusher drone developed by BETAFPV, is going further in performance, durability and power with brand new power system. It's powerful enough to carry SMO 4K camera or a customized Naked Camera for all FPV freestyle tricks, and also can carry a GoPro for some simple action 

BetaFPV Pavo30 3

BETAFPV

Pavo30 whoop quadcopter, a new concept of a 3-inch pusher drone developed by BETAFPV, is going further in performance, durability, and power with a brand new powerful propulsion system. It's powerful enough to carry SMO 4K camera or a customized Naked Camera for all FPV freestyle tricks, and also can carry a GoPro for some simple action flying. Hence this 3-inch whoop drone can meet more high-quality shooting needs. Pilots can enjoy an incredibly stable and clear HD footage video while on the FPV flight!
Note: Back in stock now! Now Pavo30 Whoop Quadcopter Analog VTX version adopts A03 5.8G VTX instead of M02 5.8G VTX. Both VTX features similar performance for FPV transmission.

Bullet Point

Pavo30 is the first 3-inch pusher whoop drone developed by BETAFPV. Compared with the Beta95X V3 pusher whoop drone, it's going further in performance and durability with a brand new powerful propulsion system.
Both analog and HD Digital VTX versions come with Toothpick F722 AIO 35A FC, 1506-3000KV motor &amp Gemfan D76 5-Blades props, this highly efficient powerful propulsion system lays the foundation for powerful and stable flight. 
Pavo30 whoop drone can do both freestyle and cinematic shot both. Not only can support carrying SMO 4K camera or a customized Naked Camera for more maneuverable to achieve all FPV freestyle tricks, but it can also carry a GoPro for some simple action flying.
Equipped with a newly developed Pavo30 frame, which is made of PA12 material, it has higher abrasion resistance, toughness, and shows excellent impact resistance in drop &amp impact tests.
Centering the drone's gravity by reversed-motor design and more compact structure to make the drone more maneuverable to achieve all FPV freestyle.
The shock mitigation system with cushion makes cameras more stable on the flight, which ensures pilots can capture all the beautiful moments of flight with the stabilized and clear video.
Pavo30 whoop drone (HD Digital VTX) comes with Nebula micro HD camera and Vista VTX system. The drone can support the DJI FPV Goggles. Pilots can enjoy superb FPV pictures and long transmission distances.


Specification




Pavo30 Whoop Drone(Analog VTX)
Pavo30 Whoop Drone(HD Digital VTX)




Weight


145g (without battery)
173g (without battery)




Wheelbase


118mm
118mm




FC



F722 AIO 35A FC (MPU6000)
F722 AIO 35A FC (MPU6000)




Frame


Pavo30 Frame Kit
Pavo30 Frame Kit




Motor


1506- 3000KV motor
 1506- 3000KV motor




Propeller


Gemfan D76 5-Blade props with 5/1.5mm shaft hole
 Gemfan D76 5-Blade props with 5/1.5mm shaft hole 




Receiver Option


Frsky FCC/Frsky LBT/TBS/FUTABA/PNP 
Frsky FCC/Frsky LBT/TBS/PNP




FPV Camera


ANT Nano camera
Nebula Nano camera




FPV Camera Tilt Degree



0°- 60° 


0°- 60° 





VTX


A03 400mW 5.8G
VISTA HD Digital VTX




Camera Mount


SMO 4K camera Mount
SMO 4K camera Mount




SMO 4K Tilt Degree


5°- 45° 

5°- 45° 





Battery



750mAh 4S battery /850mAh 4S battery (Not included) 

750mAh 4S battery /850mAh 4S battery (Not included) 





Charge Connector


XT30
XT30




Flight time


About 6-8 minutes
About 6-8 minutes






BETAFPV SMO 4K Camera
SMO 4K camera, a high-degree lightweight action camera for FPV drones that are developed by BETAFPV using Insta360 technology. SMO 4K camera only weighs 30g and is perfectly fit for FPV drones, and brings pilots an extraordinary flying experience and a strong visual impact. It will be the perfect action camera for pilots in search of high-quality video with FPV racing drones. In addition to SMO 4k, the Pavo30 whoop drone also supports carrying a customized Naked Camera and a whole GoPro.
Comes with input power connector for SMO 4K camera in default (Pre-soldered)
Pavo30 Frame Kit
Equipped with a newly developed Pavo30 frame made of PA12 material, it has higher abrasion resistance, toughness, and shows excellent impact resistance in drop &amp impact tests. So the whole drone will be a more durable flight and no fear of a crash. The reversed pusher style puts all the cameras and batteries on the top of the drone, coupled with a more compact frame structure, the center of gravity of Pavo30 is right in the middle, which makes the flight more flexible. 

Analog Camera &amp VTX
Pavo30 whoop drone analog VTX version comes with Caddx ant camera, which is an analog FPV micro camera with 1200TVL Global WDR, only weight 2g.  In addition, A03 400mW OpenVTx video transmitter which supports SmartAudio&ampTramp protocol with PIT/RCE/100/400mW adjustable output power. Therefore, pilots can customize the output power and frequency to explore more possibilities and have fun.

Nebula Micro HD System
Pavo30 whoop Drone HD Digital VTX version comes with Caddx Digital HD Camera Nebula Nano, which can perfectly support DJI goggles. With DJI goggles, it can provide 720p/60fps digital high-definition picture and a transmission range up to 4km. Users can choose 25mW/200mW/500mW/700mW from DJI goggle settings. It is smaller and designed for whoop drones. 

FC &amp ESC
Equipped with the updated F722 2-6S 35A AIO FC(BLHeli_S), the Pavo30 whoop drone totally supports a 4S battery for a stable and flexible flight experience. Come with a BETAFPVF722 processor FC, BetaFlight OSD, and 35A BLHeli_S ESC, this AIO flight controller offers more powerful flight performance that can push your FPV racer to the max. We highly recommend a 750mAh 4S battery for the drone, Pavo30 can get 6-8min flight time with it.

Motor &amp Props
Pavo30 analog VTX and HD Digital VTX version come with 1506-3000KV motor &amp Gemfan D76 5-Blades props, these 2 configurations achieve a perfect dynamic balance, which gives the drone more flexible and longer flying time. Pilots can enjoy powerful and stable flights with less noise.

The Pavo30 Whoop Quadcopter also comes with "props out" by default. Why do we need "props out" direction?
Default Betaflight props direction, quadcopter dips, and "washes out" in hard corners. With reversed props or "props out", no more dipping even in the hardest cornering.
Know more about "Props Out".

FAQ
1. Cli Dump of Pavo30 Whoop Quadcopter(Click here to find the details).
2. Cli Dump of Pavo30 Whoop Quadcopter(HD Digital VTX) (Click here to find the details).
3. STL File for the Base of Naked Camera for Pavo30 Pusher Drone Series (Click here to find the details.)
4. How to power the Naked Camera on Pavo30 or Pavo30 HD Digital VTX.
One adapter 3-pin GH1.25 power cable for Customized Naked Camera is offered in the package, pilots can use it to power the Naked Camera.
5. How to Connect the External Rx to Toothpick F722 35A AIO FC (Click here to find the details).




Package

1 * Pavo30 Whoop Quadcopter (HD Digital VTX or Analog VTX)
1 * Gemfan D76 5-Blade props(2CW+2CCW)
1 * 20mm FPV Camera Mount
1 * USB Adapter Board for FC
1 * Adapter Cable for Customized Naked Camera

Now Pavo30 Whoop Quadcopter Analog VTX version adopts A03 5.8G VTX instead of M02 5.8G VTX. Both VTX features similar performance for FPV transmission.


Batteries and SMO 4K Camera are not included in the package. You can get it here for 750mAh 4S battery/ 850mAh 4S battery and SMO 4K camera.




Pavo30 whoop quadcopter, a new concept of a 3-inch pusher drone developed by BETAFPV, is going further in performance, durability, and power with a brand new powerful propulsion system. It's powerful enough to carry SMO 4K camera or a customized Naked Camera for all FPV freestyle tricks, and also can carry a GoPro for 

Pavo30 Whoop Quadcopter

The Pavo30 Whoop Quadcopter is a 3-inch pusher drone developed by BETAFPV. The Pavo30 is powerful enough to carry an SMO 4K camera, a customized Naked camera for all FPV freestyle tricks, and a GoPro for some simple action flying!  This 3-inch whoop drone can meet high-quality shooting needs! Pilots can enjoy an incred

The Pavo30 Whoop Quadcopter is a 3-inch pusher drone developed by BETAFPV. 

BETAFPV Pavo30 3" CineWhoop Drone (Analog)

BETAFPV Pavo30 3&quot CineWhoop Drone (Analog)

GEPRC BNF CineLog 30 Analog 3" Cinewhoop

Developed from the Cinelog25, the GEPRC CineLog30 is a dream of a pusher quad. It's perfect for carrying a Naked GoPro, SMO, or other actions cameras and is capable of freestyle or cinematic flight.  Built on the new ultra-light and durable GEP-CL30 frame, it features more powerful 1404 3850Kv motors and T3x3x3 propell

GEPRC BNF CineLog 30 3

1.Newly Lightweight Design

The new design made the drone smaller and lighter. The most of important, CineLog30 can take off with 4s 660mah battery only 222.5 grams

2.Newly Noise Reduction Design
Unique noise reduction design can make CinLog30 noise much less than another Whoop Quadcopter

3.Customized Mounting base
Perfectly suitable for naked camera GP8 and INSTA 360 GO2 camera

4.Upgrade Platform Design
Make the shooting and recording effect more stable

5.Backward Push Design
Bring higher flexibility, more stable freestyle flight experience and better shock absorption ability.

6.New personalized color matching
Show your difference

1.Newly Lightweight Design  The new design made the drone smaller and lighter. The most of important, CineLog30 can take off with 4s 660mah battery only 222.5 grams  2.Newly Noise Reduction Design Unique noise reduction design can make CinLog30 noise much less than another Whoop Quadcopter  3.Customized Mounting base Perfectly suitable for naked camera GP8 and INSTA 360 GO2 camera  4.Upgrade Platform Design Make the shooting and recording effect more stable  5.Backward Push Design Bring higher flexibility, more stable freestyle flight experience and better shock absorption ability.  6.New personalized color matching Show your difference

GEPRC CineLog30 w/ Analog Caddx Ratel2 - GEPRC

GEPRC CineLog30 w/ Analog Caddx Ratel2

GEPRC CineLog 30 3" 4S Analog CineWhoop Drone

GEPRC CineLog 30 3&quot 4S Analog CineWhoop Drone

BetaFPV BNF X-Knight 35 HD 3.5" Quadcopter

X-Knight 35 FPV Quadcopter - a unique freestyle VTX FPV quadcopter with 3.5 inch propellers and Caddx Polar Vista Kit. The excellent night vision function brings you a flexible flight experience whether in daytime or nighttime. It can flight all kinds of FPV freestyle tricks. Let the show get started! Check out all our

BetaFPV X-Knight 35 FPV Quadcopter - BNF

X-Knight 35 FPV Quadcopter - a unique freestyle VTX FPV quadcopter with 3.5 inch propellers and Caddx Polar Vista Kit. The excellent night vision function brings you a flexible flight experience whether in daytime or nighttime. It can flight all kinds of FPV freestyle tricks. Let the show get started!

Bullet Points

Caddx Polar Vista Kit provides a premium and lightweight HD FPV camera system with a large wide camera angle, 162°. With video clarity and transmission intensity comparable to the DJI Air Unit, and enhanced night vision. Pilots can give full credit to the high-quality image connection under any circumstances. GoPro can be also equipped on this quadcopter.
HQ and Gemfan 3520 3-blade propellers are both put in the package. They are capable of providing linear throttle response in the flight time and control efficiency suite. With 3.5-inch props, the X-Knight 35 has enough lift power while performing a variety of freestyle and acrobatic flying tricks perfectly and efficiently. Besides, it is less noisy than those 5-inch props quads.
The unique frame design makes it suitable for photography, the lens position is forward with a protective shell. You don't have to worry about seeing the props or the frame itself in the flight video, which is great for making cinematic shots and vlogging.
Equipped with an F4 AIO 20A and 1404-3800KV motor, this great combination of power systems enables the X-Knight 35 to maintain magnificent energy and less noise in flight.


Specification

Item: X-Knight 35 FPV Quadcopter
Weight: 142.9g (Without battery)
Motor: 1404 3800KV Brushless Motors

Power Connection: XT30, black&ampred wires
Props: HQ 3520 3-Blade Propellers (Gray) / Gemfan 3520 3-Blade Propellers (Gray)

FC&ampESC: F4 AIO 20A Brushless Flight Controller V3

Battery: 750mAh 4S 95C Lipo Battery

VTX&ampCamera: Caddx Polar Vista Kit (HD Digital VTX)
FPV Camera Degree: 0°-60°
Diameter: 155m
Receiver: ELRS 2.4GHz Receiver / TBS Receiver
Flight time: 11~13 min smooth flight or 4~6 min flight of FPV freestyle tricks with 4S 750mAh battery

Caddx Polar Vista Kit (HD Digital VTX)
Caddx Polar Vista Camera is an HD digital FPV camera with excellent performance. It is lightweight, only 28g (Camera and VTX). The camera has a large wide camera angle, 162°. The video quality reaches 720p / 60fps. Low delay HD image transmission and brilliant night photography are the highlights of it as an FPV camera. Together with X-Knight 35 unique frame design and strong power system, the camera can give full play to FPV racing and bring you a hearty flight experience.

X-Knight 35 Frame Kit
X-Knight 35 Frame is special-designed for creating great flexibility on the camera degree ranging from 0°-60°. The camera position extends outward so that the props won't be seen under the sight, making a clean HD FPV flying view a possibility.
FC &amp ESC
F4 AIO 20A Brushless FC V3 has upgraded to 3 full UARTs and an 8M flash chip for Blackbox. 3 full UARTS Support DJI Digital VTX. It also extremely reduces the weight while improving the ability of the ESC to continuous current 20A, and brings pilots more power to fly the X-knight 35 drone! Compared to FC / ESC Stacks design, this board provides massive levels of performance capability, while still maintain ultralight at only 6.63g. Just plug &amp play, less solder work needed, super easy to install.

Motors &amp Props
1404 3800KV Brushless Motors are lightweight 3-4S motors. It only weighs 9.66g / 1pc. Best matched with the HQ 3520 3-Blade Props and GF 3520 3-Blade Props, the motor is very efficient in use and has an excellent racing flight experience. Combined with F4 20A AIO Brushless FC, it will provide you enough output power. The frame is made of T700 Carbon Fiber, which has good crashworthiness and durability.

Battery
4S 750mAh Lipo Battery is the best option to power the X-Knight 35 FPV Freestyle Drone and the high-efficiency performance will satisfy all of the desires of Long-Range Flight. With the flat design, the battery is only 25mm in height. With a 4S (14.8V) high voltage and 95C discharge rate, this battery allows pilots to accelerate to the full speed in a short time, and perform more actions during the flight.

FAQ
Please click here to download the CLI file for X-Knight 35.
Package
1 * X-Knight 35 FPV Quadcopter4 * HQ 3520 3-Blade Propellers (2CW+2CCW)4 * QF 3520 3-Blade Propellers (2CW+2CCW)1 * Camera Base Print

X-Knight 35 FPV Quadcopter - a unique freestyle VTX FPV quadcopter with 3.5 inch propellers and Caddx Polar Vista Kit. The excellent night vision function brings you a flexible flight experience whether in daytime or nighttime. It can flight all kinds of FPV freestyle tricks. Let the show get started! Bullet Points Cad

X-Knight 35 FPV Quadcopter (HD Digital VTX)

EMAX BNF Nanohawk X Whoop

Continual improvement is a goal we strive for at EMAX, with this goal leading us to the Nanohawk X, an incredibly small and lightweight outdoor racing drone, with incredible performance and flight times. Featuring a sleek design paired together with aircraft grade carbon fiber, the Nanohawk X retains an extremely light

Emax Nanohawk X Ultralight 1S FPV Racing Drone FrSky D8 BNF

Nanohawk X Ultralight 3 Inch 1S Outdoor FPV Drone - FrSky BNF

EMAX Nanohawk X Ultralight 3 Inch 1S Outdoor FPV Drone FrSky - RMRC

EMAX Nanohawk X Ultralight 3 Inch 1S Outdoor FPV Drone FrSky BNF




 
Size: 115mm
Weight: 41g Dry
Battery Input: 1S XT30
5A ESC + F4 FC AIO
25-100-200mw Switchable VTX
RunCam Nano 3 FPV Camera

Includes:
Nanohawk X BNF 
450mAh 1S HV LiPo w/ XT30 Connector
6-Port 1S USB Charger
3x CCW 3x CW EMAX Avia NanoX 3” Propellers
2x JST 2.0 Male to XT30 Female Charging Adapters
JST 2.0 Female to XT30 Male Flight Battery Adapter
 
 
 
 

  Size: 115mm Weight: 41g Dry Battery Input: 1S XT30 5A ESC + F4 FC AIO 25-100-200mw Switchable VTX RunCam Nano 3 FPV Camera Includes: Nanohawk X BNF  450mAh 1S HV LiPo w/ XT30 Connector 6-Port 1S USB Charger 3x CCW 3x CW EMAX Avia NanoX 3” Propellers 2x JST 2.0 Male to XT30 Female Charging Adapters JST 2.0 Female to X

Nanohawk X Ultralight 3 Inch 1S Outdoor FPV Drone - FrSky BNF from WREKD Co.

Rekon FPV

Rekon FPV BNF Rekon3 Nano LR Quadcopter

The Rekon3 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This means you can fit enough batteries to fly for several hours in your po

RekonFPV Rekon 3 Nano Long Range FPV Quad

The Rekon3 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This means you can fit enough batteries to fly for several hours in your pocket! The Rekon3 is also extremely quiet and small.

The Rekon3 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This 

Rekon FPV Rekon3 Nano LR FPV Quad

BetaFPV BNF Pavo35 HD DJI O3 6S 3.5" Cinewhoop 

Please note this version is a kit and does NOT come with an O3 Air Unit/Camera. 
Introducing the Pavo35 to the newest BetaFPV BNF family and boasting a 12 minute flight time and capable of carrying all the newest action cameras, perfect cinewhoop to add to your 6S line-up. The camera mount is compatible with DJI O3 and Walksnail.
With the  2006 | 2400KV motors and rocket thruster-inspired ducts this kit has been engineered for speed &amp strength. 
Check out pre-built quads, and the rest of our BetaFPV gear!
Features

 With a 9:4:1 Trust-to-weight Ratio, it is a quad that can be compared to the power of a 5" quad. 12 minutes of flight time ensures the pilot flies and captures maximum footage in one go. 

The innovative Y-shaped CNC metal support structure can improve the structural strength, torsion resistance, and vibration characteristics of the entire machine compared to aluminum columns, making it respond faster and more smoothly.

Rocket engine-inspired duct design improves lateral stability and increases thrust by 400g compared to without a propeller guard, giving the Pavo35 stronger power and a better flying feel.

The whoop duct is riveted and assembled, and the new appearance and design concept enables more effortless installation and a stronger structure. 

It offers exceptional mounting capabilities and supports not only DJI O3, Walksnail, and HD VTX installations but also works seamlessly with standard action cameras such as GoPro 12, DJI Action 4, and Insta One R.

F722 35A AIO Brushless Flight Controller comes with an F722 chip this board provides a great performance capability and high processing speed of up to 128k PWM frequency,

The COB light strip assembly that can be switched on and off remotely allows pilots to enjoy flying in any scene.




 
Camera &amp VTX System
The Pavo35, as a Cinewhoop, boasts compatibility with a wide range of FPV cameras and HD VTX systems, making it highly versatile. It offers exceptional mounting capabilities and supports not only DJI O3, Walksnail, and HD VTX installations but also works seamlessly with standard action cameras such as GoPro 12, DJI Action 4, and Insta One R, thanks to the included injection-molded camera bracket. The new shock-absorbing gimbal design is used in combination with the frame, it effectively addresses the issue of video jelly and enhances the stability of FPV cameras. It enables the drone to capture thrilling freestyle scenes at high speeds and output professional-grade aerial footage

Pavo35 Frame Kit
Pavo35 whoop duct can enhance an additional 400g thrust and also a CNC 7075 Aluminum Y shape standoff to eliminate distortion and bending during flight. Powerful and smooth flying is guaranteed. The modular design of the frame guarantees a streamlined appearance, with no protruding wires and the fixed power port design enables effortless one-handed connection. Assembling the frame is a breeze, requiring the simple tightening of the four bottom screws and utilizing the riveting design for convenient detachment of the duct.

The design of the whoop duct fully refers to the aerodynamic principle of the rocket engine nozzle and utilizes different heights and thicknesses between the upper edge and lower edge, through the compression of the inlet air within the duct, a substantial increase in exhaust pressure is achieved. Consequently, an additional thrust of 400g is generated, while simultaneously enhancing the horizontal stability of the cinewhoop. With augmented power and exceptional flight stability, executing challenging maneuvers such as flips and turns on the Pavo35 results in remarkably steady and precise responses. Pilots will experience an enhanced flying sensation.
The Y structural Shape standoff means 8 support force is on the top plate, increasing the structural strength of the quad, which results in smoother turns and minimal vibrations during flight. The CNC standoff is made with aircraft standard material - 7075 Aluminium Alloy to increase strength for ensure that pilots can embark on powerful flights with confidence. Additionally, the duct is securely fastened with only 4 screws, while the remaining connections employ the time-honored Chinese traditional riveting technique to ensure fast assembling and disassembling also including fixed power port design.
 
Power System
LAVA Series 2006 Brushless Motors is designed for the 6S 3.5'' quads, with high agility and acceleration. Combined with GemFan D90S 3-Blade Propellers (1.5mm Shaft) and the F722 35A AIO V2 FC, it could offer pilots flexible control. Easily meet competitively challenging drone competitions and professionally shot film creation needs, bringing you a superb flight experience and high-quality image output, leading the 6S 3.5'' quads to a smoother and more stable flight level.

Flight Controller
F722 35A AIO Brushless Flight Controller comes with an F722 chip this board provides a great performance capability and high processing speed of up to 128k PWM frequency, built-in a 16MB flash memory chip dedicated to Blackbox logging. 6 full UARTs are available on this board. Featuring a 6-pin plug&ampplay port, it can directly connect HD Digital VTX with NO soldering work. With the support of up to 2~6S input voltage, this FC pushes the FPV racer to the max, providing reliable and smooth flight for drones.
 
Shine in Night Cruise
The Pavo Series COB LED Strip is a 5V-powered LED strip measuring 750 mm*4 mm. Pavo35 Brushless Whoop Quadcopter offers the remarkable feature of controlling the onboard COB light strip via a radio transmitter. This convenient functionality allows for flexible control of the light strip's brightness and on/off status. Since light pollution should be eliminated when shooting videos, COB needs to be turned off. However, COB can be turned back on when racing and freestyle, enhance the ambiance, and provide navigation indicators, empowering pilots to seamlessly switch between various scenes anytime such as entertainment, sports, or film creation, catering to their specific needs.
Specifications


Frame: Pavo35 Brushless Whoop Frame
Wheelbase: 148mm
Motor: 2006 | 2400KV
Props: GF D90S-3 3-Blade

Battery Connector: Fixed XT60
Weight(excluding DJI O3 Air Unit, Battery): 238g

Weight(including DJI O3 Air Unit, Battery): 275g
Battery: 6S 1050mAh~1400mAh
Flight Time: 10~12 mins
Recommend Camera: DJI O3, Avatar HD Pro Caddx, RUNCAM series HD, Analog 
FC: F722 35A AIO V2
Support VTX: DJI O3 Air Unit, Walksnail Avatar HD Pro Kit, Caddx Vista Kit/RUNCAM Link, Analog camera
Support Camera: DJI O3, Avatar HD Pro Caddx, RUNCAM series 19mm&amp20mm HD, Analog 19mm
RX Version: PNP, TBS
Camera Mount: 19mm &amp 20mm 


Includes

1x Pavo35 Brushless Whoop Quadcopter | PNP
1x COB Light Strip Accessory Pack
4x GemFan D90S 3-Blade Propellers(1.5mm Shaft)(Transparent Gray)
1x GoPro Mount
1x Camera Mount (Left)

1x Camera Mount (Right)

4x M1.6 x 8 Hex Flat Head Screw

4x M2 x 3 Hex Flat Head Screw

4x M2 x 8 Hex Flat Head Screw

4x M2 x 4 Hex Button Head Screw

2x M2 x 5 Hex Button Head Screw

2x M2 x 8 Hex Button Head Screw

1x M5 x 18 Hex Button Head Screw
1x M5 x 5 Anti-loosening Nut

1x H1.27 Hexagon Wrench

1x Service Card

1x Frame Instruction Manual

1x Flight Controller Instruction Manual


Please note this version is a kit and does NOT come with an O3 Air Unit/Camera.  Introducing the Pavo35 to the newest BetaFPV BNF family and boasting a 12 minute flight time and capable of carrying all the newest action cameras, perfect cinewhoop to add to your 6S line-up. The camera mount is compatible with DJI O3 and

BetaFPV BNF Pavo35 HD 6S 3.5" Cinewhoop for DJI O3 (without O3 Unit) - Choose Your Receiver from WREKD Co.

BetaFPV BNF Pavo35 HD 6S 3.5

BetaFPV BNF Pavo35 HD 6S 3.5" Cinewhoop for DJI O3 (without O3 Unit) - Choose Your Receiver

Five33

Introducing the Pavo35 to the newest BetaFPV BNF family and boasting a 12 minute flight time and capable of carrying all the newest action cameras, perfect cinewhoop to add to your 6S line-up. The camera mount is compatible with DJI O3 and Walksnail.
With the  2006 | 2400KV motors and rocket thruster-inspired ducts this kit has been engineered for speed &amp strength. 
Features

 With a 9:4:1 Trust-to-weight Ratio, it is a quad that can be compared to the power of a 5" quad. 12 minutes of flight time ensures the pilot flies and captures maximum footage in one go.

The innovative Y-shaped CNC metal support structure can improve the structural strength, torsion resistance, and vibration characteristics of the entire machine compared to aluminum columns, making it respond faster and more smoothly.

Rocket engine-inspired duct design improves lateral stability and increases thrust by 400g compared to without a propeller guard, giving the Pavo35 stronger power and a better flying feel.

The whoop duct is riveted and assembled, and the new appearance and design concept enables more effortless installation and a stronger structure.

It offers exceptional mounting capabilities and supports not only DJI O3, Walksnail, and HD VTX installations but also works seamlessly with standard action cameras such as GoPro 12, DJI Action 4, and Insta One R.

F722 35A AIO Brushless Flight Controller comes with an F722 chip this board provides a great performance capability and high processing speed of up to 128k PWM frequency,

The COB light strip assembly that can be switched on and off remotely allows pilots to enjoy flying in any scene.

 

 
 

 
Camera &amp VTX System
The Pavo35, as a Cinewhoop, boasts compatibility with a wide range of FPV cameras and HD VTX systems, making it highly versatile. It offers exceptional mounting capabilities and supports not only DJI O3, Walksnail, and HD VTX installations but also works seamlessly with standard action cameras such as GoPro 12, DJI Action 4, and Insta One R, thanks to the included injection-molded camera bracket. The new shock-absorbing gimbal design is used in combination with the frame, it effectively addresses the issue of video jelly and enhances the stability of FPV cameras. It enables the drone to capture thrilling freestyle scenes at high speeds and output professional-grade aerial footage

Pavo35 Frame Kit
Pavo35 whoop duct can enhance an additional 400g thrust and also a CNC 7075 Aluminum Y shape standoff to eliminate distortion and bending during flight. Powerful and smooth flying is guaranteed. The modular design of the frame guarantees a streamlined appearance, with no protruding wires and the fixed power port design enables effortless one-handed connection. Assembling the frame is a breeze, requiring the simple tightening of the four bottom screws and utilizing the riveting design for convenient detachment of the duct.

The design of the whoop duct fully refers to the aerodynamic principle of the rocket engine nozzle and utilizes different heights and thicknesses between the upper edge and lower edge, through the compression of the inlet air within the duct, a substantial increase in exhaust pressure is achieved. Consequently, an additional thrust of 400g is generated, while simultaneously enhancing the horizontal stability of the cinewhoop. With augmented power and exceptional flight stability, executing challenging maneuvers such as flips and turns on the Pavo35 results in remarkably steady and precise responses. Pilots will experience an enhanced flying sensation.
The Y structural Shape standoff means 8 support force is on the top plate, increasing the structural strength of the quad, which results in smoother turns and minimal vibrations during flight. The CNC standoff is made with aircraft standard material - 7075 Aluminium Alloy to increase strength for ensure that pilots can embark on powerful flights with confidence. Additionally, the duct is securely fastened with only 4 screws, while the remaining connections employ the time-honored Chinese traditional riveting technique to ensure fast assembling and disassembling also including fixed power port design.
 
Power System
LAVA Series 2006 Brushless Motors is designed for the 6S 3.5'' quads, with high agility and acceleration. Combined with GemFan D90S 3-Blade Propellers (1.5mm Shaft) and the F722 35A AIO V2 FC, it could offer pilots flexible control. Easily meet competitively challenging drone competitions and professionally shot film creation needs, bringing you a superb flight experience and high-quality image output, leading the 6S 3.5'' quads to a smoother and more stable flight level.

Flight Controller
F722 35A AIO Brushless Flight Controller comes with an F722 chip this board provides a great performance capability and high processing speed of up to 128k PWM frequency, built-in a 16MB flash memory chip dedicated to Blackbox logging. 6 full UARTs are available on this board. Featuring a 6-pin plug&ampplay port, it can directly connect HD Digital VTX with NO soldering work. With the support of up to 2~6S input voltage, this FC pushes the FPV racer to the max, providing reliable and smooth flight for drones.
 
Shine in Night Cruise
The Pavo Series COB LED Strip is a 5V-powered LED strip measuring 750 mm*4 mm. Pavo35 Brushless Whoop Quadcopter offers the remarkable feature of controlling the onboard COB light strip via a radio transmitter. This convenient functionality allows for flexible control of the light strip's brightness and on/off status. Since light pollution should be eliminated when shooting videos, COB needs to be turned off. However, COB can be turned back on when racing and freestyle, enhance the ambiance, and provide navigation indicators, empowering pilots to seamlessly switch between various scenes anytime such as entertainment, sports, or film creation, catering to their specific needs.
Specifications


Frame: Pavo35 Brushless Whoop Frame
Wheelbase: 148mm
Motor: 2006 | 2400KV
Props: GF D90S-3 3-Blade

Battery Connector: Fixed XT60
Weight(excluding DJI O3 Air Unit, Battery): 238g

Weight(including DJI O3 Air Unit, Battery): 275g
Battery: 6S 1050mAh~1400mAh
Flight Time: 10~12 mins
Recommend Camera: DJI O3, Avatar HD Pro Caddx, RUNCAM series HD, Analog 
FC: F722 35A AIO V2
Support VTX: DJI O3 Air Unit, Walksnail Avatar HD Pro Kit, Caddx Vista Kit/RUNCAM Link, Analog camera
Support Camera: DJI O3, Avatar HD Pro Caddx, RUNCAM series 19mm&amp20mm HD, Analog 19mm
RX Version: PNP, TBS
Camera Mount: 19mm &amp 20mm 


Includes

1x Pavo35 Brushless Whoop Quadcopter | PNP
1x COB Light Strip Accessory Pack
4x GemFan D90S 3-Blade Propellers(1.5mm Shaft)(Transparent Gray)
1x GoPro Mount
1x Camera Mount (Left)

1x Camera Mount (Right)

4x M1.6 x 8 Hex Flat Head Screw

4x M2 x 3 Hex Flat Head Screw

4x M2 x 8 Hex Flat Head Screw

4x M2 x 4 Hex Button Head Screw

2x M2 x 5 Hex Button Head Screw

2x M2 x 8 Hex Button Head Screw

1x M5 x 18 Hex Button Head Screw
1x M5 x 5 Anti-loosening Nut

1x H1.27 Hexagon Wrench

1x Service Card

1x Frame Instruction Manual

1x Flight Controller Instruction Manual


Introducing the Pavo35 to the newest BetaFPV BNF family and boasting a 12 minute flight time and capable of carrying all the newest action cameras, perfect cinewhoop to add to your 6S line-up. The camera mount is compatible with DJI O3 and Walksnail. With the  2006 | 2400KV motors and rocket thruster-inspired ducts thi

BetaFPV BNF Pavo35 HD 6S 3.5" Cinewhoop for DJI O3 (without O3 Unit) - ELRS 2.4GHz

iFlight

iFlight BNF ProTek35 Analog 3.5" Cinewhoop

IFLIGHT

After our very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use. 
Our all-new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here. 
ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all-new 2205 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS-measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch-outs or light freestyle moves. 
A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).











Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!











Note: Battery, GoPro, and GoPro mount are NOT included.

Check out our other pre-built quads, as well as the rest of our iFlight selection!
Features

High-performance True-AIO Board Beast Whoop F7 AIO 55A v2.0 to save weight and space
T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
Low Resonance frame construction (Less Jello, more Cinematic footage)
Pre-tuned with smooth freestyle settings
Butter smooth 2205 3200KV (4S)
ProTek35 Prop Guards V2.0
No Props or frame in view!

Pre-Tuned &amp Pre-Setup:

Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning were applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, and activate Acro-Mode"



Specifications
Beast F7 V2 AIO FC

MCU: BGA-STM32F745
Gyro: BMI270
Blackbox: 8Mb Onboard Flash
BEC output: 5V 2.5A
Barometer: BMP280
Connector: Micro-USB
OSD: AT7456E
FC Firmware：IFLIGHT_F745_AIO_V2

Mounting pattern: 25.5x25.5mm φ3mm
Dimensions: 32.5x32.5mm
Weight: 8.5g

F7 55A 2-6S ESC

Current Sensor: Yes
Input: 2-6S LIPO
Current scale: 200
Constant: 55A 
BLHeli: BLHeli-S
Telemetry: no
ESC Firmware: BlheliS G-H-30
Mounting pattern: 25.5x25.5mm/Φ3mm
Dimensions: 32.5x32.5mm

SucceX Mini Force 5.8GHz 600mW VTX

Power: PIT/25/200/400mW/600mW
Antenna interface: MMCX
VTX protocol: IRC Tramp
Output 40 channels.
Size: 29x29mm
Mounting pattern: 20x20Φ3/25x25 mmΦ2
Weight: 4g


 
Includes

1x ProTek35 Frame
2x Albatross RHCP RP-SMA 5.8g antenna
1x TPU Antenna holder
2x Nazgul 3535 propeller (Set of 4 - Color May Vary)
1x iFlight Lipo Strap 15x150mm (Color May Vary)
1x iFlight Lipo Strap 15x250mm (Color May Vary)
1x GoPro TPU bottom stand black (GoPro Protector not included)


After our very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.  Our all-new 3.5inch project is finally ready for all you content creators or those guys who

iFlight BNF Protek35 Analog 4S 3.5" Quad  - Choose Receiver Type

iFlight BNF Protek35 Analog 4S 3.5" Quad - Choose Receiver Type

RaceDayQuads

After our very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use. 
Our all-new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here. 
ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all-new 2205 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS-measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch-outs or light freestyle moves. 
A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).











Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!











Note: Battery, GoPro, and GoPro mount are NOT included.


Features

High-performance True-AIO Board Beast Whoop F7 AIO 55A v2.0 to save weight and space
T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
Low Resonance frame construction (Less Jello, more Cinematic footage)
Pre-tuned with smooth freestyle settings
Butter smooth 2205 3200KV (4S)
ProTek35 Prop Guards V2.0
No Props or frame in view!

Pre-Tuned &amp Pre-Setup:

Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning were applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, and activate Acro-Mode"



Specifications
Beast F7 V2 AIO FC

MCU: BGA-STM32F745
Gyro: BMI270
Blackbox: 8Mb Onboard Flash
BEC output: 5V 2.5A
Barometer: BMP280
Connector: Micro-USB
OSD: AT7456E
FC Firmware：IFLIGHT_F745_AIO_V2

Mounting pattern: 25.5x25.5mm φ3mm
Dimensions: 32.5x32.5mm
Weight: 8.5g

F7 55A 2-6S ESC

Current Sensor: Yes
Input: 2-6S LIPO
Current scale: 200
Constant: 55A 
BLHeli: BLHeli-S
Telemetry: no
ESC Firmware: BlheliS G-H-30
Mounting pattern: 25.5x25.5mm/Φ3mm
Dimensions: 32.5x32.5mm

SucceX Mini Force 5.8GHz 600mW VTX

Power: PIT/25/200/400mW/600mW
Antenna interface: MMCX
VTX protocol: IRC Tramp
Output 40 channels.
Size: 29x29mm
Mounting pattern: 20x20Φ3/25x25 mmΦ2
Weight: 4g


 
Includes

1x ProTek35 Frame
2x Albatross RHCP RP-SMA 5.8g antenna
1x TPU Antenna holder
2x Nazgul 3535 propeller (Set of 4 - Color May Vary)
1x iFlight Lipo Strap 15x150mm (Color May Vary)
1x iFlight Lipo Strap 15x250mm (Color May Vary)
1x GoPro TPU bottom stand black (GoPro Protector not included)


iFlight BNF Protek35 Analog 4S 3.5

iFlight BNF Protek35 Analog 4S 3.5" Quad  - Choose Receiver Type from WREKD Co.

DJI Avata 2 Fly More Combo RTF Kit

All products with batteries must be shipped by a ground shipping method.
Includes the DJI Avata 2 drone, Goggles 3, RC Motion 3, and more. This combo lets you quickly get started with Avata 2 and experience the joy of immersive flight.
Check out our other RTF combos, all our pre-built quads and all of our DJI products!
Features






All Thrills, No Frills

Immersive Flight Experience
Intuitive Motion Control
Tight Shots in Super-Wide 4K
Easy ACRO
Built-in Propeller Guard
Hassle-Free POV Content

Fully Experience Flight DJI Avata 2 delivers an adrenaline-pumping immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the new DJI Goggles 3 and DJI RC Motion 3.DJI Goggles 3Visionary BreakthroughDJI Goggles 3 now has Real View PiP (Picture-In-Picture). Observe your surroundings without removing the goggles, for more safety and immersion. The Micro-OLED high-definition display and ultra-low-latency transmission bring the world in to view.
DJI RC Motion 3Feel Every FlightEffortlessly perform difficult aerial acrobatics with DJI RC Motion 3. New pilots can now perform spectacular flips, drifts, and other captivating maneuvers.
Easy ACROSoar, dive, and roll for stunning aerial footage with a single push. Capturing epic FPV footage with DJI RC Motion 3 and Avata 2 is easier than ever.


One-Push Flip: 360° front/back flip, adding fresh twists to your footage.

One-Push Roll: Roll 360° left/right, turning any shot from meh to magic.


One-Push 180° Drift: High-speed lateral drifts to yaw spin 180° past objects and swiftly pull away, achieving dramatic visuals.

Tight Shots in Super-Wide 4K Create breathtaking visuals with Avata 2's 155° FOV and its ability to swiftly approach and pull away from subjects. New pilots can quickly master aerobatic shots and capture fast-moving dynamic low-altitude shots that other drones can't.

155° Ultra-Wide-Angle FOV of Avata 2
82° Standard View of Camera Drones

1/1.3-inch Image SensorThe upgraded 1/1.3-inch image sensor expands the captured dynamic range, handling low-light conditions more effectively to capture outstanding footage on every flight.

Effective Pixels: 12 MP
Offline Stabilization: Gyroflow

Immersion Reimagined4K/60fps HDR VideosUnleash your true aerial potential. The 4K/60fps HDR on Avata 2 captures all the awesome of high-speed flight. In the goggles, you can adjust the sharpness and noise reduction levels for more finely tuned videos.
RockSteadyEquipped with DJI's latest stabilization algorithm, Avata 2 captures smooth, steady footage even when flying at high speeds or in windy conditions.RockSteady On | RockSteady Off
HorizonSteadyHorizonSteady handles horizontal rotations up to 360°, ensuring the captured footage remains locked on the horizon even if the drone turns sharply or sways dramatically.HorizonSteady On | HorizonSteady Off
155° Ultra-Wide-Angle FOVAmplify your vision and increase the immersion of low-altitude, high-speed flights. Avata 2 offers ultra-wide-angle, wide-angle, and normal-angle FOV options giving you the ability to adjust to the scenario.Ultra-Wide-Angle | Wide-Angle | Normal
10-bit D-Log MCapture rich detail in highlights and shadows and enhance content post-production opportunities while further streamlining color-grading.Standard Mode | 10-bit D-Log M Mode
Got You CoveredComprehensive SafetyThe updated integrated propeller guard design of Avata 2 makes it lighter and more agile, enabling it to navigate freely in tight spaces. Releasing the accelerator on RC Motion 3 or pressing the lock button brings the drone to a halt, allowing you to handle unexpected situations calmly. In addition, the automatic Return to Home (RTH) function is initiated when the drone's battery is low or in case of signal loss, adding an extra layer of security.3D Preview | AR Preview
Advanced Positioning with New SensorsNew binocular fisheye sensors enable downward and backward visual positioning during low-altitude and indoor flights, enhancing flight stability and safety.
Turtle ModeAvata 2 can automatically flip itself back into takeoff position when upside down with Turtle mode enabled, so you can quickly get airborne again.
Excellence in EverythingFlight Time/Video TransmissionThe Sky's the Limit With Longer Flight. Avata 2 boasts a maximum flight time of 23 minutes and supports PD fast charging, so you can quickly recharge it and take to the skies again.The new DJI Avata 2 Two-Way Charging Hub features a power accumulation function, allowing the transfer of remaining power from multiple batteries to the one with the highest charge level, giving you an "extra battery" in critical moments.
O4 Video Transmission, Enhanced PerceptionDJI O4 video transmission's enhanced stability lets you fully immerse yourself in each flight and provides greater safety. Its two-transmitter, four-receiver, four-antenna design ensures strong anti-interference performance, and it boasts up to 13 km of maximum video transmission distance, a transmission latency as low as 24 ms, 1080p/100fps high-definition image quality, and a maximum transmission bitrate of 60Mbps.
Boundless Passion, Wireless SharingWatch the DJI Goggles 3 live feed from Avata 2 on your smart device's DJI Fly App. Connect up to 5 m away. Sharing the excitement of FPV just got easier, and learning how to fly is more accessible than ever.
Save More, Share MoreCapture and Edit SeamlesslyAvata 2 comes equipped with 46GB internal storage, capable of storing approximately 90 minutes of 1080p/60fps video, ensuring you capture the best parts of each flight.With Wi-Fi connectivity for fast file transfer to your phone, post-editing and sharing of your finished work is highly efficient.One-Tap VFX with LightCutThe LightCut app, connecting directly to DJI Avata 2 via Wi-Fi, allows you to intelligently add Sky VFX during post based on the flight trajectory captured in your videos, helping you easily create engaging aerial footage. Without the need to download the footage, the app offers editing and, combined with ‌One-Tap Edit, allows you to produce polished content in a snap effortlessly.


Sky VFX: After connecting the device and importing the footage, tap Sky VFX to add unique overlays, through-the-air text animations, virtual cockpits, and dashboard effects, enhancing the interactive fun and engagement of your immersive flight footage

One-Tap Edit: With AI's intelligent recognition of video types and themes, you can effortlessly filter through and select highlights with smooth camera work and exquisite composition. Coupled with a vast array of thematic templates, enabling you to produce polished content. The app also boasts intelligent sound effects, color restoration, one-click addition of device watermarks, and end credits, among other features

Wireless Connection: When Avata 2 is connected wirelessly to LightCut, you can preview the captured footage within the app and edit it without the need to download the footage, saving valuable space on your smartphone



Specifications
DJI Avata 2

Takeoff Weight: 377g Approx.
Dimensions: 185×212×64mm (L×W×H)
Max Ascent Speed: 6 m/s (Normal mode), 9 m/s (Sport mode)
Max Descent Speed: 6 m/s (Normal mode), 9 m/s (Sport mode)
Max Horizontal Speed (near sea level, no wind): 8 m/s (Normal mode), 16 m/s (Sport mode), 27 m/s (Manual mode)* No faster than 19 m/s with the Manual mode in the EU regions.

Max Takeoff Altitude: 5000m * Measured in a windless environment when taking off from an altitude of 5000 m and ascending vertically by 500 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.

Max Flight Time: Approx. 23 mins * Measured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Hovering Time: Approx. 21 mins * ‌‌Measured when hovering in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Flight Distance: 13.0 km * ‌Measured when flying forward at a speed of 43.2 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Wind Speed Resistance: 10.7 m/s (Level 5)
Operating Temperature: -10° to 40° C (14° to 104° F)
Global Navigation Satellite System: GPS + Galileo + BeiDou
Hovering accuracy range Vertical:

±0.1 m (with vision positioning)
±0.5 m (with GNSS positioning)

Horizontal:

±0.3 m (with vision positioning)
±1.5 m (with GNSS positioning)

Internal Storage: 46 GB


Camera

Image Sensor: 1/1.3-inch image sensor
Effective Pixels: 12 MP
Lens FOV: 155°
Format Equivalent: 12 mm
Aperture: f/2.8
Focus: 0.6 m to ∞
ISO Range: 100-25600 (Auto), 100-25600 (Manual)
Shutter Speed Video: 1/8000-1/30 s, Photo: 1/8000-1/50 s
Max Image Size: 4000×2256 (16∶9), 4000×3000 (4∶3)
Still Photography Mode: Single shot
Photo Format: JPEG
Video Resolution

-4K (4∶3): 3840×2880@30/50/60fps
-4K (16∶9): 3840×2160@30/50/60fps
-2.7K (4∶3): 2688×2016@30/50/60fps
-2.7K (16∶9): 2688×1512@30/50/120fps
-1080p (4∶3): 1440×1080@30/50/120fps
-1080p (16∶9): 1920×1080@30/50/120fps


Video Format: MP4 (H.264/H.265)
Max Video Bitrate: 130 Mbps
Supported File System: exFAT
Color Mode: Standard, D-Log M
Camera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.
Camera EIS: Supports RockSteady 3.0+ and HorizonSteady, * Can be disabled *When stabilization is turned off, footage captured with the wide-angle view supports offline stabilization Gyroflow.

Gimbal

Stabilization: Single-axis mechanical gimbal (tilt)
Mechanical RangeC85: Tilt: -95° to 90°
Controllable Range: Tilt: -85° to 80°
Max Control Speed (tilt): 100°/s
Angular Vibration Range: ±0.01°
Electronic Roll Axis: Real-time screen correction is unavailable during recording, but can be applied to the footage recorded on the drone.

Sensing

Sensing Type: Downward and backward visual positioning
Downward

-ToF Effective Measurement Height: 10 m-Precise Hovering Range: 0.3-10 m-Measurement Range: 0.3-20 m-FOV: Horizontal 78°, Vertical 78°

Sensing Backward

-Measurement Range: 0.5-20 m-FOV: Horizontal 78°, Vertical 78°

Sensing Operating Environment

-Diffuse reflective surfaces with discernible patterns, diffuse reflectivity &gt 20% (such as concrete pavement)-Adequate lighting (lux &gt 15, normal indoor lighting conditions)
Video Transmission

Video Transmission System: O4
Live View Quality: 1080p@30/50/60/100fps
Operating Frequency:

-2.400-2.4835 GHz-5.170-5.250 GHz*-5.725-5.850 GHz** 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.

Transmitter Power (EIRP):

-2.4 GHz＜33 dBm (FCC)＜20 dBm (CE/SRRC/MIC)-5.1 GHz&lt 23 dBm (CE)-5.8 GHz＜33 dBm (FCC)＜30 dBm (SRRC)&lt 14 dBm (CE)

Communication Bandwidth Max 60 MHz
Max Transmission Distance (unobstructed, free of interference)

-FCC: 13 km (subject to the aircraft's max flight distance)-CE: 10 km-SRRC: 10 km-MIC: 10 km* Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.

Max Transmission Distance (unobstructed, with interference)

-Strong Interference: Urban landscape, approx. 1.5-4 km-Medium Interference: Suburban landscape, approx. 4-10 km-Low Interference: Suburb/seaside, approx. 10-13 km* Data tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

Max Transmission Distance (obstructed, with interference)

-Low Interference and Obstructed by Buildings: approx. 0-0.5 km-Low Interference and Obstructed by Trees: approx. 0.5-3 km* Data tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

Max Download Speed: Wi-Fi: 30 MB/s

* Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.

Lowest Latency With DJI Goggles 3:

-1080p/100fps Video Transmission Quality: 24 ms-1080p/60fps Video Transmission Quality: 40 ms

Max Video Bitrate: 60Mbps
Antennas: 4 antennas, 2T4R

Wi-Fi

ProtocolC156: 802.11a/b/g/n/ac
Operating Frequency: 2.400-2.4835 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP):

-2.4 GHz&lt20 dBm (FCC／CE／SRRC／MIC)-5.8 GHz&lt20 dBm (FCC／SRRC)&lt 14 dBm (CE)
Bluetooth

Protocol: Bluetooth 5.0
Operating Frequency: 2.400-2.4835 GHz
Transmitter Power (EIRP): &lt10 dBm

Intelligent Flight Battery

Capacity: 2150 mAh
Weight: 145g Approx.
Standard Voltage: 14.76 V
Max Charging Voltage: 17 V
Battery Type: Li-ion
Energy: 31.7 Wh@0.5C
Charging Temperature: 5° to 40° C (41° to 104° F)
Charging Time:

-With Charging Hub (60W max charging power)From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 min-Directly Charging the Drone (30 W max charging power)From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min
Charger

Recommended Charger: DJI 65W Portable Charger, DJI 65W Car Charger, USB Power Delivery charger

Battery Charging Hub

Input: 5-20 V, max 3 A
Output (power accumulation): Max 65 W
Output (charging): Max 17 V
Output (USB): 5 V, 2 A
Charging Type: Three batteries charged in sequence
Compatibility: DJI Avata 2 Intelligent Flight Battery

Recommended microSD Cards 

SanDisk Extreme PRO 32GB U3 A1 V30 microSDHC
Lexar Professional 1066x 64GB U3 A2 V30 microSDXC
Lexar Professional 1066x 128GB U3 A2 V30 microSDXC
Lexar Professional 1066x 256GB U3 A2 V30 microSDXC
Lexar Professional 1066x 512GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC
Kingston CANVAS React Plus 64GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 128GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 256GB U3 A1 V90 microSDXC
Samsung EVO Plus 512GB U3 A2 V30 microSDXC


Includes

1x DJI AVATA 2
1x DJI Goggles 3
1x RC Motion 3
1x Flight Battery
2x Propeller Sets
1x Screwdriver
1x Lanyard
1x -2.0D Corrective lenses (Set)
1x Additional Forehead Pad
1x USB-C OTG Cable
1x Type-C USB Cable
1x Manuals


All products with batteries must be shipped by a ground shipping method. Includes the DJI Avata 2 drone, Goggles 3, RC Motion 3, and more. This combo lets you quickly get started with Avata 2 and experience the joy of immersive flight. Check out our other RTF combos, all our pre-built quads and all of our DJI products!

DJI AVATA 2 Fly More Combo RTF Kit - Single Battery

The adrenaline-pumping DJI Avata 2 delivers an immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the new DJI Goggles 3 and DJI RC Motion 3. DJI Avata 2 Fly More Combo (Three Battery) Compared to the DJI Avata 2 Fly More Combo (Single Battery), this

(PRE-ORDER) DJI Avata 2 Fly More Combo RTF Kit with Goggles 3 and RC Motion 3 Controller - Three Battery

DJI Avata 2 FPV DroneAll Thrills, No FrillsThe adrenaline-pumping DJI Avata 2 delivers an immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the new DJI Goggles 3 and DJI RC Motion 3.Immersive Flight ExperienceIntuitive Motion ControlTight Shots in Super-Wide 4KEasy ACROBuilt-in Propeller GuardHassle-Free POV ContentDJI Goggles 3Representing a stunning visionary breakthroughDJI Goggles 3 now has Real View PiP (Picture-In-Picture). Observe your surroundings without removing the goggles, for more safety and immersion. The Micro-OLED high-definition display and ultra-low-latency transmission bring the world in to view.Flipping Awesome!Easy ACROSoar, dive, and roll for stunning aerial footage with a single push. Capturing epic FPV footage with DJI RC Motion 3 and Avata 2 is easier than ever.One-Push Flip360° front/back flip, adding fresh twists to your footage.One...

DJI Avata 2 Fly More Combo (Single Battery) - RMRC

DJI Avata 2 Fly More Combo (Single Battery)

This DJI Avata 2 Combo includes the Avata 2 Drone, Goggles 3, Motion Controller 3, 1 Intelligent Flight battery, a charging hub, and everything you need to get in the air!
Check out our in-depth review below!
Features

Immersive Flight Experience
Intuitive Motion Control (when used with RC Motion 3 Controller)
Tight Shots in Super-Wide 4K
Easy ACRO 
Built-in Propeller Guard
Hassle-Free POV Content
Easy ACRO
Flip, Roll, 180° Drift
1/1.3″ CMOS Super-Wide-Angle Camera
4K/60fps HDR Videos 
10-bit D-Log M Color Mode
Downward/Backward Visual Positioning
23-Min Max Flight Time
The drone supports PD fast charging.
DJI O4 Video Transmission
Max Transmission Distance: 13 km
Max Transmission Bitrate: 60Mbps
46GB Large Internal Storage
High-Speed QuickTransfer

Specifications
DJI Avata 2 Drone

Takeoff Weight: Approx. 377 g
Dimensions: 185×212×64 mm (L×W×H)
Max Ascent Speed: ‌6 m/s (Normal mode), 9 m/s (Sport mode)
Max Descent Speed:
Max Horizontal Speed: (near sea level, no wind) 8 m/s (Normal mode), ‌16 m/s (Sport mode), 27 m/s (Manual mode)*
Max Flight Time: ‌Approx. 23 mins
Max Hovering Time: ‌Approx. 21 mins
Max Flight Distance: 13.0 km‌
Max Wind Speed Resistance: 10.7 m/s (Level 5)
Operating Temperature: -10° to 40° C (14° to 104° F)
Global Navigation Satellite System: GPS + Galileo + BeiDou
Hovering accuracy range: Vertical: ±0.1 m (with vision positioning), ±0.5 m (with GNSS positioning)Horizontal: ±0.3 m (with vision positioning), ±1.5 m (with GNSS positioning)
Internal Storage: 46 GB
Image Sensor: ‌1/1.3-inch image sensor
Effective Pixels: 12 MPLens ‌FOV: 155°Format Equivalent: 12 mm
Aperture: f/2.8
Focus: 0.6 m to ∞
ISO Range: 100-25600 (Auto), 100-25600 (Manual)
Shutter Speed Video: 1/8000-1/30 s
Photo: 1/8000-1/50 s
Max Image Size: 4000×2256 (16∶9), 4000×3000 (4∶3)
Still Photography Mode: Single shot
Photo Format: JPEG
Video Resolution 4K (4∶3): 3840×2880@30/50/60fps4K (16∶9): 3840×2160@30/50/60fps2.7K (4∶3): 2688×2016@30/50/60fps2.7K (16∶9): 2688×1512@30/50/120fps1080p (4∶3): 1440×1080@30/50/120fps1080p (16∶9): 1920×1080@30/50/120fps
Video Format: MP4 (H.264/H.265)Max Video Bitrate: 130 Mbps
Supported File System: exFAT
Color Mode: Standard, D-Log M
Camera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.
EIS: Supports RockSteady 3.0+ and HorizonSteady, Can be disabled*
Stabilization: Single-axis mechanical gimbal (tilt)
Mechanical Range Tilt: -95° to 90°
Controllable Range Tilt: -85° to 80°
Max Control Speed (tilt): 100°/s
Angular Vibration Range: ±0.01°
Sensing Type: Downward and backward visual positioningDownward ToF Effective Measurement Height: 10 mPrecise Hovering Range: 0.3-10 mMeasurement Range: 0.3-20 mFOV: Horizontal 78°, Vertical 78°Backward Measurement Range: 0.5-20 mFOV: Horizontal 78°, Vertical 78°Adequate lighting: (lux &gt 15, normal indoor lighting conditions)
Video Transmission System: O4
Live View Quality: 1080p@30/50/60/100fps
Operating Frequency: 2.400-2.4835 GHz,5.170-5.250 GHz*,5.725-5.850 GHz*
Transmitter Power (EIRP):2.4 GHz: ＜33 dBm (FCC), ＜20 dBm (CE/SRRC/MIC)5.1 GHz: &lt 23 dBm (CE)5.8 GHz: ＜33 dBm (FCC),＜30 dBm (SRRC), &lt 14 dBm (CE)
Communication Bandwidth: Max 60 MHz
Max Transmission Distance: (unobstructed, free of interference) FCC: 13 km (subject to the aircraft's max flight distance), CE: 10 km, SRRC: 10 km, MIC: 10 km
Max Transmission Distance (unobstructed, with interference)Strong Interference: Urban landscape, approx. 1.5-4 kmMedium Interference: Suburban landscape, approx. 4-10 kmLow Interference: Suburb/seaside, approx. 10-13 kmMax Transmission Distance (obstructed, with interference) Low Interference and Obstructed by Buildings: approx. 0-0.5 kmLow Interference and Obstructed by Trees: approx. 0.5-3 km
Max Download Speed Wi-Fi: 30 MB/s*
Lowest Latency With DJI Goggles 3:1080p/100fps Video Transmission Quality: 24 ms1080p/60fps Video Transmission Quality: 40 ms‌
Max Video Bitrate: 60Mbps
Antennas: 4 antennas, 2T4R
Protocol: 802.11a/b/g/n/ac
Operating Frequency: 2.400-2.4835 GHz, 5.725-5.850 GHzTransmitter Power: (EIRP) 2.4 GHz: &lt20 dBm (FCC／CE／SRRC／MIC)5.8 GHz: &lt20 dBm (FCC／SRRC), &lt 14 dBm (CE)Protoco:l Bluetooth 5.0Operating Frequency 2.400-2.4835 GHzTransmitter Power (EIRP) &lt10 dBm

Battery

Capacity: 2150 mAh
Weight: Approx. 145 g
Standard Voltage: 14.76 V
Max Charging Voltage 17 V
Battery Type: Li-ion
Energy: 31.7 Wh@0.5C
Charging Temperature: 5° to 40° C (41° to 104° F)
Charging Time With Charging Hub: (60W max charging power):From 0 to 100%: approx. 45 min‌From 10 to 90%: approx. 30 min‌‌
Directly Charging the Drone (30 W max charging power):‌From 0 to 100%: approx. 88 min‌From 10 to 90%: approx. 60 min‌‌‌‌

Includes

1x DJI Avata 2 Drone
1x DJI Goggles 3
1x DJI Motion 3
1x DJI Avata 2 Intelligent Flight Battery
1x DJI Goggles 3 Foam Padding
1x DJI Goggles 3 Additional Forehead Pad
1x DJI Goggles 3 -2.0D Corrective Lenses (Pair)
2x DJI Avata 2 Propellers (Pair)
8x DJI Avata 2 Propeller Screw
1x DJI Avata 2 Gimbal Protector
1x USB-C OTG Cable

1x Type-C to Type-C PD Cable
1x Screwdriver


This DJI Avata 2 Combo includes the Avata 2 Drone, Goggles 3, Motion Controller 3, 1 Intelligent Flight battery, a charging hub, and everything you need to get in the air! Check out our in-depth review below! Features Immersive Flight Experience Intuitive Motion Control (when used with RC Motion 3 Controller) Tight Sho

(PRE-ORDER) DJI Avata 2 Fly More Combo with 1 Battery

This DJI Avata 2 Combo includes the Avata 2 Drone, Goggles 3, Motion Controller 3, 1 Intelligent Flight battery, a charging hub, and everything you need to get in the air! Check out our in-depth review below! Features Immersive Flight Experience Intuitive Motion Control (when used with RC Motion 3 Controller) Tight Shots in Super-Wide 4K Easy ACRO Built-in Propeller Guard Hassle-Free POV Content Easy ACRO Flip, Roll, 180° Drift 1/1.3″ CMOS Super-Wide-Angle Camera 4K/60fps HDR Videos 10-bit D-Log M Color Mode Downward/Backward Visual Positioning 23-Min Max Flight Time The drone supports PD fast charging. DJI O4 Video Transmission Max Transmission Distance: 13 km Max Transmission Bitrate: 60Mbps 46GB Large Internal Storage High-Speed QuickTransfer Specifications DJI Avata 2 Drone Takeoff Weight: Approx. 377 g Dimensions: 185×212×64 mm (L×W×H) Max Ascent Speed: ‌6 m/s (Normal mode), 9 m/s (Sport mode) Max

Experience an immersive flight with the DJI Avata 2 Fly More Combo, featuring intuitive motion control, super-wide 4K capture, and easy POV content creation.

DJI Avata 2 Fly More Combo w/ 1 Battery

DJI Avata 2 Fly More Combo (Three Batteries) - RMRC

DJI Avata 2 Fly More Combo (Three Batteries)

Experience an immersive flight with the DJI Avata 2 Fly More Combo, featuring intuitive motion control, super-wide 4K capture, and easy POV content creation.&nbsp

Experience an immersive flight with the DJI Avata 2 Fly More Combo, featuring intuitive motion control, super-wide 4K capture, and easy POV content creation. 

DJI Avata 2 Fly More Combo w/ 3 Batteries

DJI Avata 2

Pre-Orders shipping ASAP! All products with batteries must be shipped by a ground shipping method.
All Thrills and No Frills. Experience the Avata 2 and enjoy immersive flight.
Check out our other RTF combos, all our pre-built quads and all of our DJI products!
Features





All Thrills, No Frills

Immersive Flight Experience
Intuitive Motion Control
Tight Shots in Super-Wide 4K
Easy ACRO
Built-in Propeller Guard
Hassle-Free POV Content

Fully Experience Flight DJI Avata 2 delivers an adrenaline-pumping immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the new DJI Goggles 3 and DJI RC Motion 3.
Tight Shots in Super-Wide 4K Create breathtaking visuals with Avata 2's 155° FOV and its ability to swiftly approach and pull away from subjects. New pilots can quickly master aerobatic shots and capture fast-moving dynamic low-altitude shots that other drones can't.

155° Ultra-Wide-Angle FOV of Avata 2
82° Standard View of Camera Drones

1/1.3-inch Image SensorThe upgraded 1/1.3-inch image sensor expands the captured dynamic range, handling low-light conditions more effectively to capture outstanding footage on every flight.

Effective Pixels: 12 MP
Offline Stabilization: Gyroflow

Immersion Reimagined4K/60fps HDR VideosUnleash your true aerial potential. The 4K/60fps HDR on Avata 2 captures all the awesome of high-speed flight. In the goggles, you can adjust the sharpness and noise reduction levels for more finely tuned videos.
RockSteadyEquipped with DJI's latest stabilization algorithm, Avata 2 captures smooth, steady footage even when flying at high speeds or in windy conditions.RockSteady On | RockSteady Off
HorizonSteadyHorizonSteady handles horizontal rotations up to 360°, ensuring the captured footage remains locked on the horizon even if the drone turns sharply or sways dramatically.HorizonSteady On | HorizonSteady Off
155° Ultra-Wide-Angle FOVAmplify your vision and increase the immersion of low-altitude, high-speed flights. Avata 2 offers ultra-wide-angle, wide-angle, and normal-angle FOV options giving you the ability to adjust to the scenario.Ultra-Wide-Angle | Wide-Angle | Normal
10-bit D-Log MCapture rich detail in highlights and shadows and enhance content post-production opportunities while further streamlining color-grading.Standard Mode | 10-bit D-Log M Mode
Got You CoveredComprehensive SafetyThe updated integrated propeller guard design of Avata 2 makes it lighter and more agile, enabling it to navigate freely in tight spaces. [4] Releasing the accelerator on RC Motion 3 or pressing the lock button brings the drone to a halt, allowing you to handle unexpected situations calmly. In addition, the automatic Return to Home (RTH) function is initiated when the drone's battery is low or in case of signal loss, adding an extra layer of security.3D Preview | AR Preview
Advanced Positioning with New SensorsNew binocular fisheye sensors enable downward and backward visual positioning during low-altitude and indoor flights, enhancing flight stability and safety.
Turtle ModeAvata 2 can automatically flip itself back into takeoff position when upside down with Turtle mode enabled, so you can quickly get airborne again.
Excellence in EverythingFlight Time/Video TransmissionThe Sky's the Limit With Longer Flight. Avata 2 boasts a maximum flight time of 23 minutes and supports PD fast charging, so you can quickly recharge it and take to the skies again.The new DJI Avata 2 Two-Way Charging Hub features a power accumulation function, allowing the transfer of remaining power from multiple batteries to the one with the highest charge level, giving you an "extra battery" in critical moments.
O4 Video Transmission, Enhanced PerceptionDJI O4 video transmission's enhanced stability lets you fully immerse yourself in each flight and provides greater safety. Its two-transmitter, four-receiver, four-antenna design ensures strong anti-interference performance, and it boasts up to 13 km of maximum video transmission distance, a transmission latency as low as 24 ms, 1080p/100fps high-definition image quality, and a maximum transmission bitrate of 60Mbps.
Boundless Passion, Wireless SharingWatch the DJI Goggles 3 live feed from Avata 2 on your smart device's DJI Fly App. Connect up to 5 m away. Sharing the excitement of FPV just got easier, and learning how to fly is more accessible than ever.
Save More, Share MoreCapture and Edit SeamlesslyAvata 2 comes equipped with 46GB internal storage, capable of storing approximately 90 minutes of 1080p/60fps video, ensuring you capture the best parts of each flight.With Wi-Fi connectivity for fast file transfer to your phone, post-editing and sharing of your finished work is highly efficient.One-Tap VFX with LightCutThe LightCut app, connecting directly to DJI Avata 2 via Wi-Fi, allows you to intelligently add Sky VFX during post based on the flight trajectory captured in your videos, helping you easily create engaging aerial footage. Without the need to download the footage, the app offers editing and, combined with ‌One-Tap Edit, allows you to produce polished content in a snap effortlessly.


Sky VFX: After connecting the device and importing the footage, tap Sky VFX to add unique overlays, through-the-air text animations, virtual cockpits, and dashboard effects, enhancing the interactive fun and engagement of your immersive flight footage

One-Tap Edit: With AI's intelligent recognition of video types and themes, you can effortlessly filter through and select highlights with smooth camera work and exquisite composition. Coupled with a vast array of thematic templates, enabling you to produce polished content. The app also boasts intelligent sound effects, color restoration, one-click addition of device watermarks, and end credits, among other features

Wireless Connection: When Avata 2 is connected wirelessly to LightCut, you can preview the captured footage within the app and edit it without the need to download the footage, saving valuable space on your smartphone



Specifications
DJI Avata 2

Takeoff Weight: 377g Approx.
Dimensions: 185×212×64mm (L×W×H)
Max Ascent Speed: 6 m/s (Normal mode), 9 m/s (Sport mode)
Max Descent Speed: 6 m/s (Normal mode), 9 m/s (Sport mode)
Max Horizontal Speed (near sea level, no wind): 8 m/s (Normal mode), 16 m/s (Sport mode), 27 m/s (Manual mode)* No faster than 19 m/s with the Manual mode in the EU regions.

Max Takeoff Altitude: 5000m * Measured in a windless environment when taking off from an altitude of 5000 m and ascending vertically by 500 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.

Max Flight Time: Approx. 23 mins * Measured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Hovering Time: Approx. 21 mins * ‌‌Measured when hovering in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Flight Distance: 13.0 km * ‌Measured when flying forward at a speed of 43.2 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Wind Speed Resistance: 10.7 m/s (Level 5)
Operating Temperature: -10° to 40° C (14° to 104° F)
Global Navigation Satellite System: GPS + Galileo + BeiDou
Hovering accuracy range Vertical:

±0.1 m (with vision positioning)
±0.5 m (with GNSS positioning)

Horizontal:

±0.3 m (with vision positioning)
±1.5 m (with GNSS positioning)

Internal Storage: 46 GB


Camera

Image Sensor: 1/1.3-inch image sensor
Effective Pixels: 12 MP
Lens FOV: 155°
Format Equivalent: 12 mm
Aperture: f/2.8
Focus: 0.6 m to ∞
ISO Range: 100-25600 (Auto), 100-25600 (Manual)
Shutter Speed Video: 1/8000-1/30 s, Photo: 1/8000-1/50 s
Max Image Size: 4000×2256 (16∶9), 4000×3000 (4∶3)
Still Photography Mode: Single shot
Photo Format: JPEG
Video Resolution

-4K (4∶3): 3840×2880@30/50/60fps
-4K (16∶9): 3840×2160@30/50/60fps
-2.7K (4∶3): 2688×2016@30/50/60fps
-2.7K (16∶9): 2688×1512@30/50/120fps
-1080p (4∶3): 1440×1080@30/50/120fps
-1080p (16∶9): 1920×1080@30/50/120fps


Video Format: MP4 (H.264/H.265)
Max Video Bitrate: 130 Mbps
Supported File System: exFAT
Color Mode: Standard, D-Log M
Camera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.
Camera EIS: Supports RockSteady 3.0+ and HorizonSteady, * Can be disabled *When stabilization is turned off, footage captured with the wide-angle view supports offline stabilization Gyroflow.

Gimbal

Stabilization: Single-axis mechanical gimbal (tilt)
Mechanical RangeC85: Tilt: -95° to 90°
Controllable Range: Tilt: -85° to 80°
Max Control Speed (tilt): 100°/s
Angular Vibration Range: ±0.01°
Electronic Roll Axis: Real-time screen correction is unavailable during recording, but can be applied to the footage recorded on the drone.

Sensing

Sensing Type: Downward and backward visual positioning
Downward

-ToF Effective Measurement Height: 10 m-Precise Hovering Range: 0.3-10 m-Measurement Range: 0.3-20 m-FOV: Horizontal 78°, Vertical 78°

Sensing Backward

-Measurement Range: 0.5-20 m-FOV: Horizontal 78°, Vertical 78°

Sensing Operating Environment

-Diffuse reflective surfaces with discernible patterns, diffuse reflectivity &gt 20% (such as concrete pavement)-Adequate lighting (lux &gt 15, normal indoor lighting conditions)
Video Transmission

Video Transmission System: O4
Live View Quality: 1080p@30/50/60/100fps
Operating Frequency:

-2.400-2.4835 GHz-5.170-5.250 GHz*-5.725-5.850 GHz** 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.

Transmitter Power (EIRP):

-2.4 GHz＜33 dBm (FCC)＜20 dBm (CE/SRRC/MIC)-5.1 GHz&lt 23 dBm (CE)-5.8 GHz＜33 dBm (FCC)＜30 dBm (SRRC)&lt 14 dBm (CE)

Communication Bandwidth Max 60 MHz
Max Transmission Distance (unobstructed, free of interference)

-FCC: 13 km (subject to the aircraft's max flight distance)-CE: 10 km-SRRC: 10 km-MIC: 10 km* Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.

Max Transmission Distance (unobstructed, with interference)

-Strong Interference: Urban landscape, approx. 1.5-4 km-Medium Interference: Suburban landscape, approx. 4-10 km-Low Interference: Suburb/seaside, approx. 10-13 km* Data tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

Max Transmission Distance (obstructed, with interference)

-Low Interference and Obstructed by Buildings: approx. 0-0.5 km-Low Interference and Obstructed by Trees: approx. 0.5-3 km* Data tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

Max Download Speed: Wi-Fi: 30 MB/s

* Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.

Lowest Latency With DJI Goggles 3:

-1080p/100fps Video Transmission Quality: 24 ms-1080p/60fps Video Transmission Quality: 40 ms

Max Video Bitrate: 60Mbps
Antennas: 4 antennas, 2T4R

Wi-Fi

ProtocolC156: 802.11a/b/g/n/ac
Operating Frequency: 2.400-2.4835 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP):

-2.4 GHz&lt20 dBm (FCC／CE／SRRC／MIC)-5.8 GHz&lt20 dBm (FCC／SRRC)&lt 14 dBm (CE)
Bluetooth

Protocol: Bluetooth 5.0
Operating Frequency: 2.400-2.4835 GHz
Transmitter Power (EIRP): &lt10 dBm

Intelligent Flight Battery

Capacity: 2150 mAh
Weight: 145g Approx.
Standard Voltage: 14.76 V
Max Charging Voltage: 17 V
Battery Type: Li-ion
Energy: 31.7 Wh@0.5C
Charging Temperature: 5° to 40° C (41° to 104° F)
Charging Time:

-With Charging Hub (60W max charging power)From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 min-Directly Charging the Drone (30 W max charging power)From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min
Charger

Recommended Charger: DJI 65W Portable Charger, DJI 65W Car Charger, USB Power Delivery charger

Recommended microSD Cards 

SanDisk Extreme PRO 32GB U3 A1 V30 microSDHC
Lexar Professional 1066x 64GB U3 A2 V30 microSDXC
Lexar Professional 1066x 128GB U3 A2 V30 microSDXC
Lexar Professional 1066x 256GB U3 A2 V30 microSDXC
Lexar Professional 1066x 512GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC
Kingston CANVAS React Plus 64GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 128GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 256GB U3 A1 V90 microSDXC
Samsung EVO Plus 512GB U3 A2 V30 microSDXC


Includes

1x DJI AVATA 2
1x Flight Battery


Pre-Orders shipping ASAP! All products with batteries must be shipped by a ground shipping method. All Thrills and No Frills. Experience the Avata 2 and enjoy immersive flight. Check out our other RTF combos, all our pre-built quads and all of our DJI products! Features All Thrills, No Frills Immersive Flight Experienc

(PRE-ORDER) DJI AVATA 2 - Drone Only

Experience an immersive flight with the DJI Avata 2 FPV Drone, featuring intuitive motion control, super-wide 4K capture, and easy POV content creation.&nbsp

Experience an immersive flight with the DJI Avata 2 FPV Drone, featuring intuitive motion control, super-wide 4K capture, and easy POV content creation. 

Experience an immersive flight with the DJI Avata 2 FPV Drone, featuring intuitive motion control, super-wide 4K capture, and easy POV content creation. Enjoy adrenaline-pumping FPV flight with improved imaging, safety, and extended battery life. Execute effortless aerial acrobatics like flips and drifts, ideal for cap

(PRE-ORDER) DJI Avata 2 FPV Drone

DJI Avata 2 (Drone Only) - RMRC

DJI Avata 2 (Drone Only)

Avata 2 features more flight time, more range, a more internal store, an improved camera and much more! Check out our in-depth review below!
Features

Immersive Flight Experience
Intuitive Motion Control (when used with RC Motion 3 Controller)
Tight Shots in Super-Wide 4K
Easy ACRO
Built-in Propeller Guard
Hassle-Free POV Content
Easy ACRO
Flip, Roll, 180° Drift
1/1.3″ CMOS Super-Wide-Angle Camera
4K/60fps HDR Videos 
10-bit D-Log M Color Mode
Downward/Backward Visual Positioning
23-Min Max Flight Time
The drone supports PD fast charging.
DJI O4 Video Transmission
Max Transmission Distance: 13 km
Max Transmission Bitrate: 60Mbps
46GB Large Internal Storage
High-Speed QuickTransfer


Specifications
DJI Avata 2 Drone

Takeoff Weight: Approx. 377 g
Dimensions: 185×212×64 mm (L×W×H)
Max Ascent Speed: ‌6 m/s (Normal mode), 9 m/s (Sport mode)
Max Descent Speed:
Max Horizontal Speed: (near sea level, no wind) 8 m/s (Normal mode), ‌16 m/s (Sport mode), 27 m/s (Manual mode)*
Max Flight Time: ‌Approx. 23 mins
Max Hovering Time: ‌Approx. 21 mins
Max Flight Distance: 13.0 km‌
Max Wind Speed Resistance: 10.7 m/s (Level 5)
Operating Temperature: -10° to 40° C (14° to 104° F)
Global Navigation Satellite System: GPS + Galileo + BeiDou
Hovering accuracy range: Vertical: ±0.1 m (with vision positioning), ±0.5 m (with GNSS positioning)Horizontal: ±0.3 m (with vision positioning), ±1.5 m (with GNSS positioning)
Internal Storage: 46 GB
Image Sensor: ‌1/1.3-inch image sensor
Effective Pixels: 12 MPLens ‌FOV: 155°Format Equivalent: 12 mm
Aperture: f/2.8
Focus: 0.6 m to ∞
ISO Range: 100-25600 (Auto), 100-25600 (Manual)
Shutter Speed Video: 1/8000-1/30 s
Photo: 1/8000-1/50 s
Max Image Size: 4000×2256 (16∶9), 4000×3000 (4∶3)
Still Photography Mode: Single shot
Photo Format: JPEG
Video Resolution 4K (4∶3): 3840×2880@30/50/60fps4K (16∶9): 3840×2160@30/50/60fps2.7K (4∶3): 2688×2016@30/50/60fps2.7K (16∶9): 2688×1512@30/50/120fps1080p (4∶3): 1440×1080@30/50/120fps1080p (16∶9): 1920×1080@30/50/120fps
Video Format: MP4 (H.264/H.265)Max Video Bitrate: 130 Mbps
Supported File System: exFAT
Color Mode: Standard, D-Log M
Camera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.
EIS: Supports RockSteady 3.0+ and HorizonSteady, Can be disabled*
Stabilization: Single-axis mechanical gimbal (tilt)
Mechanical Range Tilt: -95° to 90°
Controllable Range Tilt: -85° to 80°
Max Control Speed (tilt): 100°/s
Angular Vibration Range: ±0.01°
Sensing Type: Downward and backward visual positioningDownward ToF Effective Measurement Height: 10 mPrecise Hovering Range: 0.3-10 mMeasurement Range: 0.3-20 mFOV: Horizontal 78°, Vertical 78°Backward Measurement Range: 0.5-20 mFOV: Horizontal 78°, Vertical 78°Adequate lighting: (lux &gt 15, normal indoor lighting conditions)
Video Transmission System: O4
Live View Quality: 1080p@30/50/60/100fps
Operating Frequency: 2.400-2.4835 GHz,5.170-5.250 GHz*,5.725-5.850 GHz*
Transmitter Power (EIRP):2.4 GHz: ＜33 dBm (FCC), ＜20 dBm (CE/SRRC/MIC)5.1 GHz: &lt 23 dBm (CE)5.8 GHz: ＜33 dBm (FCC),＜30 dBm (SRRC), &lt 14 dBm (CE)
Communication Bandwidth: Max 60 MHz
Max Transmission Distance: (unobstructed, free of interference) FCC: 13 km (subject to the aircraft's max flight distance), CE: 10 km, SRRC: 10 km, MIC: 10 km
Max Transmission Distance (unobstructed, with interference)Strong Interference: Urban landscape, approx. 1.5-4 kmMedium Interference: Suburban landscape, approx. 4-10 kmLow Interference: Suburb/seaside, approx. 10-13 kmMax Transmission Distance (obstructed, with interference) Low Interference and Obstructed by Buildings: approx. 0-0.5 kmLow Interference and Obstructed by Trees: approx. 0.5-3 km
Max Download Speed Wi-Fi: 30 MB/s*
Lowest Latency With DJI Goggles 3:1080p/100fps Video Transmission Quality: 24 ms1080p/60fps Video Transmission Quality: 40 ms‌
Max Video Bitrate: 60Mbps
Antennas: 4 antennas, 2T4R
Protocol: 802.11a/b/g/n/ac
Operating Frequency: 2.400-2.4835 GHz, 5.725-5.850 GHzTransmitter Power: (EIRP) 2.4 GHz: &lt20 dBm (FCC／CE／SRRC／MIC)5.8 GHz: &lt20 dBm (FCC／SRRC), &lt 14 dBm (CE)Protoco:l Bluetooth 5.0Operating Frequency 2.400-2.4835 GHzTransmitter Power (EIRP) &lt10 dBm

Battery

Capacity: 2150 mAh
Weight: Approx. 145 g
Standard Voltage: 14.76 V
Max Charging Voltage 17 V
Battery Type: Li-ion
Energy: 31.7 Wh@0.5C
Charging Temperature: 5° to 40° C (41° to 104° F)
Charging Time With Charging Hub: (60W max charging power):From 0 to 100%: approx. 45 min‌From 10 to 90%: approx. 30 min‌‌
Directly Charging the Drone (30 W max charging power):‌From 0 to 100%: approx. 88 min‌From 10 to 90%: approx. 60 min‌‌‌‌

Includes

1x DJI Avata 2 Drone
1x DJI Avata 2 Intelligent Flight Battery
2x DJI Avata 2 Propellers (Pair)
8x DJI Avata 2 Propeller Screw
1x DJI Avata 2 Gimbal Protector
1x Type-C to Type-C PD Cable
1x Screwdriver


Avata 2 features more flight time, more range, a more internal store, an improved camera and much more! Check out our in-depth review below! Features Immersive Flight Experience Intuitive Motion Control (when used with RC Motion 3 Controller) Tight Shots in Super-Wide 4K Easy ACRO Built-in Propeller Guard Hassle-Free P

(PRE-ORDER) DJI Avata 2 Drone

Avata 2 features more flight time, more range, a more internal store, an improved camera and much more! Check out our in-depth review below! Features Immersive Flight Experience Intuitive Motion Control (when used with RC Motion 3 Controller) Tight Shots in Super-Wide 4K Easy ACRO Built-in Propeller Guard Hassle-Free POV Content Easy ACRO Flip, Roll, 180° Drift 1/1.3″ CMOS Super-Wide-Angle Camera 4K/60fps HDR Videos 10-bit D-Log M Color Mode Downward/Backward Visual Positioning 23-Min Max Flight Time The drone supports PD fast charging. DJI O4 Video Transmission Max Transmission Distance: 13 km Max Transmission Bitrate: 60Mbps 46GB Large Internal Storage High-Speed QuickTransfer Specifications DJI Avata 2 Drone Takeoff Weight: Approx. 377 g Dimensions: 185×212×64 mm (L×W×H) Max Ascent Speed: ‌6 m/s (Normal mode), 9 m/s (Sport mode) Max Descent Speed: Max Horizontal Speed: (near sea level, no wind) 8 m/s (Normal

EMAX BNF Babyhawk DJI O3 3.5" Micro Quad - ELRS

EMAX Babyhawk 03 ELRS BNFIn the modern age of FPV and content creation, the need for a small fast portable drone capable of capturing 4k stabilized video footage has never been more necessary. In the pursuit of this, EMAX has updated one of its proven platforms to meet the demand for this capability, through the Babyhawk 03. The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit.Now with a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro. Customers can now capture high quality 4K video all with the onboard O3.STABILIZED VIDEOIn partnership with DJI, the Babyhawk 03 features a crisp 4k video feed with zero latency, enabling video capture in a variety of situations. Built int...

EMAX Babyhawk O3 ELRS BNF - RMRC

EMAX Babyhawk O3 3.5&quot ELRS BNF Quad

The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous generation and boasts a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long-flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro, a big complaint of the Babyhawk II. Customers can now capture high-quality 4K video all with the onboard O3.
Check out all our pre-built quads, and all our EMAX gear!
Features

Improved video transmission with DJI O3 system 

More durable frame redesigned for resilience.
Sub 250 grams




Specifications


Wheelbase: 155mm
Dry Weight: 154g
Frame Material: Carbon Fiber
Prop: Avan 3.5 
Maximum size: 210mm
Input Voltage: 2-4S Lipo





Includes



1x EMAX BNF Babyhawk O3 w/ DJI O3 Air Unit - ELRS





The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous generation and boasts a DJI O3 A

EMAX BNF Babyhawk 3.5" Micro Quad w/ DJI O3 Air Unit - ELRS from WREKD Co.

EMAX BNF Babyhawk 3.5

EMAX BNF Babyhawk 3.5" Micro Quad w/ DJI O3 Air Unit - ELRS

Happymodel BNF Crux35 HD 3.5" HDZero Quadcopter

Description Ideal for backyard freestyle flying and park cruising. The HDZero Crux35 is a great choice for pilots looking for a 3.5in prop, sub 250g freestyle drone that includes HDZero’s highest power output VTX and fastest 90hz camera. This drone’s small size allows pilots to fly in more locations, while the high-power output of the Freestyle v2 VTX delivers ample video reception to the pilot’s goggles. The fast 90hz HDZero Nano 90 camera offers a flying experience like no other – see for yourself the benefits of 3ms (14ms full frame) latency. This combination makes it easier than ever to fly into small gaps at high speeds with confidence. HDZero Crux35 uses Happymodel EX1404 high-efficiency motors and HQPROP 3.5-inch three-blade propellers resulting in a high thrust-to-weight ratio and long flight times. Specifications &#009&#009&#009&#009&#009&#009Brand Name:   &#009&#009&#009HDZero and HappyModel Co-branded&#009&#009&#009&#009&#009&#009&#009Model:   &#009&#009&#009HDZero Crux35&#009&#009&#009&#009&#009&#009&#009Frame wheelbase:   &#009&#009&#009150mm&#009&#009&#009&#009&#009&#009&#009Weight:   &#009&#009&#009115g without battery&#009&#009&#009&#009&#009&#009&#009Size:   &#009&#009&#009113mm * 113mm * 47mm&#009&#009&#009&#009&#009&#009&#009Receiver option:   &#009&#009&#009UART ELRS v3.0&#009&#009&#009&#009&#009&#009&#009Flying time:&#009&#009&#0098min~12min 4s 750mah battery&#009&#009&#009&#009&#009&#009&#009 &#009&#009&#009 &#009&#009&#009 Includes Crux35 Frame * 1CurxF405 HD ELRS AIO Flight controller * 1HDZero Freestyle v2 VTX + Runcam Nano 90 Camera * 1Happymodel EX1404 KV3500 brushless motor * 4HQProp T3.5X2X3Grey (4cw+4ccw) * 1Screw Driver * 1Buckle Velcro for battery * 1 Special shipping notes for this product:Free shipping: - From ShenZhen China - About 2-4 weeks Expedited shipping: $19.99 - From ShenZhen China - About 1-2 weeks  Youtube[$249 3.5in 1W Ripper - HDZero Crux35]

Description Ideal for backyard freestyle flying and park cruising. The HDZero Crux35 is a great choice for pilots looking for a 3.5in prop, sub 250g freestyle drone that includes HDZero’s highest power output VTX and fastest 90hz camera. This drone’s small size allows pilots to fly in more locations, while the high-power output of the Freestyle v2 VTX delivers ample video reception to the pilot’s goggles. The fast 90hz HDZero Nano 90 camera offers a flying experience like no other – see for yourself the benefits of 3ms (14ms full frame) latency. This combination makes it easier than ever to fly into small gaps at high speeds with confidence. HDZero Crux35 uses Happymodel EX1404 high-efficiency motors and HQPROP 3.5-inch three-blade propellers resulting in a high thrust-to-weight ratio and long flight times. Specifications 						Brand Name:   			HDZero and HappyModel Co-branded							Model:   			HDZero Crux35							Frame wheelbase:   			150mm							Weight:   			115g without battery							Size:   			113mm * 113mm * 47mm							Receiver option:   			UART ELRS v3.0							Flying time:			8min~12min 4s 750mah battery							 			 			 Includes Crux35 Frame * 1CurxF405 HD ELRS AIO Flight controller * 1HDZero Freestyle v2 VTX + Runcam Nano 90 Camera * 1Happymodel EX1404 KV3500 brushless motor * 4HQProp T3.5X2X3Grey (4cw+4ccw) * 1Screw Driver * 1Buckle Velcro for battery * 1 Special shipping notes for this product:Free shipping: - From ShenZhen China - About 2-4 weeks Expedited shipping: $19.99 - From ShenZhen China - About 1-2 weeks  Youtube[$249 3.5in 1W Ripper - HDZero Crux35]