FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

BetaFPV

BetaFPV BNF Meteor75 Brushless Whoop

BETAFPV

All PRE-ORDERS shipping ASAP!!! All products with batteries must be shipped by a ground shipping method.
Want a 1S whoop for outdoor, around the house and yard? The Meteor75 Brushless Whoop Quadcopter would be your best choice! This whoop quadcopter is equipped with the ultralight F4 1S 5A FC (2022), supporting serial ExpressLRS 2.4G, Frsky, or TBS RX for options. The new canopy with special style and high-quality C03 FPV camera combined with 0802SE 19500KV motors make it perfectly balanced in all areas of performance.
Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!

Features

The Meteor75 is the first generation whoop powered by a brand-new BT2.0 connector 450mAh battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compared with the initial PH2.0 connector.
The power system uses the latest 0802SE 19500KV motors and 40mm 2-blade props, which provides pilots a stronger experience of a powerful indoor and outdoor flight
Built-in 1.52g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
Adopted with an injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
Reserved two UART ports on F4 1S 5A FC (SPI Frsky) board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.
F4 1S 5A FC (Serial ELRS 2.4G) is flexible in upgrading and has great potential. It supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware.
The various colors of the spare parts including the 75mm frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.

BETAFPV Meteor Series
This is the new Meteor75 Analog VTX version with a new micro canopy, built-in serial ExpressLRS 2.4G instead of SPI ERLS 2.4G, and the new C03 FPV camera that ensures a high-quality and clear image. For pilots who want to fly 1S HD whoop drone, Meteor75 HD digital VTX is a good choice.



 
Meteor75 (2022)
Meteor75 (2021)
Meteor75 1S HD


FC&ampESC
F4 1S 5A FC (2022)
F4 1S 5A FC
F4 1S 5A FC (2022)


RX
Serial ELRS, SPI FrSky/PNP, TBS
SPI ELRS, SPI FrSky, TBS
Serial ELRS, SPI FrSky/PNP, TBS


Camera
C03 FPV Camera
C02 FPV Camera
Walksnail/HDZero Camera


VTX
M03 Analog VTX
M03 Analog VTX
Walksnail Avatar or HD Zero Lite


Motors
0802SE 19500Kv Motor
1102 18000Kv or 0802SE 19500Kv Motors
1102 18000Kv Motors


Props
40mm 2-blade
40mm 3-blade, or 40mm 2-blade
40mm 3-blade


Canopy
New Micro Canopy (2022)
Micro Canopy
Micro Canopy for HD


Tilt
20° or 30°

30°

0-45°



Flight Time
6 mins (stable flying)
3-4 mins
3.5 mins (HDZero) or 3 mins (Walksnail)



 
BETAFPV upgraded all Meteor Series quadcopters like Meteor65, Meteor65 Pro, Meteor 75, and Meteor85 whoop quadcopters, through the new flight controller, motors, camera, frame, canopy, etc, to provide the best whoop quadcopters for pilots.
BT2.0 Connector
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of the PH2.0 connector. There is a graph comparing between BT2.0 connector 1S 450mAh battery and the Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has a long time and improvement in voltage sag with a BT2.0 connector, which brings better flight performance.

Flight Controller
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP and can be switched to Futaba SFHSS protocol through Betaflight configurator. The ESC on the new board powered by BB51 hardware in place of BB21 comes with Bluejay 96k ESC firmware, allowing 0802SE 19500KV motors to give full play to the efficiency of power. We update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.



 
Meteor75 (ELRS)
Meteor75 (FrSky, PNP, TBS)


FC Inside
F4 1S 5A FC (Serial ELRS 2.4GHz)
F4 1S 5A FC (SPI FrSky)


Gyro
BMI270
BMI270


FC Firmware
BETAFPVF411
BETAFPVF411RX


UART Port
One UART Port
Two UART Port


External RX
Not Supported
Supported



 
Note: For F4 1S 5A FC (serial ELRS 2.4G), ONLY Betaflight firmware 4.3.0 and up start to support BMI270 gyro. For F4 1S 5A FC (SPI Frsky), we recommend using BETAFPVF411RX 4.2.11 firmware and CLI dump file offered by BETAFPV. If you update the 4.3.0 and up firmware for serial ELRS 2.4G from the Betaflight official site, please flash the CLI dump file for Meteor75.
Download the FC firmware and CLI dump file for Meteor 75 ELRS2.4G, Frsky, or TBS.

C03 Camera
C03 FPV Micro Camera is 1.52g ultralight weight and a great camera for indoor micro FPV quadcopters. It features a 1200TVL definition with 1/3" CMOS sensor, 2.1mm lens for 160° FOV, and excellent latency, which boasts high-quality, clear and sharper images through your goggles.

Motors
0802SE 19500KV Motor motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight which is only 1.88g/pc but also ensures excellent performance of power and thrust. It makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time.

Frame
This frame is ultralight only 5.68g and durable enough. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery. BETAFPV offers various colors of Meteor75 frames for options, making DIY easier.

Specification

Item: Meteor75 Brushless Whoop Quadcopter (2022)
FC&ampESC: F4 1S 5A FC (Serial ELRS 2.4G)/F4 1S 5A FC (SPI Frsky)
Frame: Meteor75 Frame
Motors: 0802SE 19500KV Motor
Props: 40mm 2-Blade Propellers (1.0mm Shaft)
Camera: C03 FPV Camera
Tilt: 30° (default)/20° (optional)
Canopy: Canopy for Micro Camera 2022 version
Receiver Option: ELRS2.4G, Frsky/PNP, TBS Crossfire
VTX: M03 25-350mW VTX
Battery: BT2.0 450mAh 1S 30C Battery
Flight time: 6 mins (stable flying) / 4.5 mins (acro flying)
Weight: 24.98g

Includes

1x Meteor75 Brushless Whoop Quadcopter (1S)
2x 450mAh 1S 30C Battery with BT2.0 connector
1x BT2.0 Battery Charger and Voltage Tester
1x TypeC USB cable
1x Customized Carry Case
1x Spare 40mm 2-Blade props (1.0mm Shaft)
1x Screwdriver
3x Decorative Parts
1x 20° Lens Camera Mount for C03 Camera
1x 30° Lens Camera Mount for C02 Camera

FAQ

Download the FC firmware and CLI dump file for Meteor75.

ExpressLRS is the most popular radio link in 2021. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. Know more about the ExpressLRS project on Github or join the discussion in the Facebook Group.



All PRE-ORDERS shipping ASAP!!! All products with batteries must be shipped by a ground shipping method. Want a 1S whoop for outdoor, around the house and yard? The Meteor75 Brushless Whoop Quadcopter would be your best choice! This whoop quadcopter is equipped with the ultralight F4 1S 5A FC (2022), supporting serial 

(PRE-ORDER) BetaFPV BNF Meteor75 1S Brushless Analog Whoop (BT2.0) - ELRS 2.4 GHz

(PRE-ORDER) BetaFPV BNF Meteor75 1S Brushless Analog Whoop (BT2.0) - E

Stepping into HD world with 1S whoop quadcopter! The classical Meteor75 Brushless Whoop Quadcopter comes with Walksnail Avatar Mini HD VTX or HDZero Whoop Lite Bundle, bringing conspicuous images and exceptional visuals to your eyes and capturing details that make the footage look as exciting as the flight. Together wi

BetaFPV Meteor75 1S Walksnail Digital VTX Brushless Whoop Quadcopter - Choose Receiver


Stepping into HD world with 1S whoop quadcopter! The classical Meteor75 Brushless Whoop Quadcopter comes with Walksnail Avatar Mini HD VTX or HDZero Whoop Lite Bundle, bringing conspicuous images and exceptional visuals to your eyes and capturing details that make the footage look as exciting as the flight. Together with 1102 18000KV motors that feature strong propulsion, it gives pilots powerful and impressive results. Enjoy an immersive flight experience, and get the perfect shots with the new HD VTX system indoors and outdoors.

Tons of ExpressLRS items are available now!
Recommend the newest BT2.0 550mAh 1S Battery. More flight time and higher discharge rate.

Bullet Points

Powerful propulsion capabilities combined with Walksnail HD VTX or HDZero VTX give pilots an immersive flight experience and impactful visuals.
Ultralight weight for 40.5g (Walksnail)/ 36.4g (HDZero). With BT2.0 connector, it effectively decreases internal connector resistance for good conductive performance.

Equipped with 40mm 3-blade props and upgraded 1102 18000KV motors. The upgraded motors not only take abilities as good as before to provide strong propulsion in 1S whoop drone but also come with a new look. And simultaneously its black and red motor bell fully matches the Meteror75 frame.

Reserve two UART ports on F4 1S 5A FC(SPI Frsky) V3.0 board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.
F4 1S 5A FC (Serial ELRS 2.4G) V2.0 is flexible in upgrading and has great potential. It supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware.


Specification

Item: Meteor75 Brushless Whoop Quadcopter (1S HD Digital VTX)
Flight Time: 3.5 mins (HDZero)/3 mins (Walksnail)
Camera Adjustable Angle: 0-45°
Motors: 1102 18000KV Motor

Battery: BT2.0 450mAh 1S 30C Battery

Frame: Meteor75 Micro Brushless Whoop Frame

Propellers: 40mm 3-Blade Propellers (1.5mm Shaft)

Weight Without Battery: 40.5g (Walksnail)/36.4g (HDZero)
Receiver: Serial ELRS 2.4G/SPI Frsky/TBS
FC&ampESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0
VTX Power Output: 350mW (Walksnail), 25mW/200mW (HDZero)
VTX: 1S Walksnail Avatar Mini HD VTX/HDZero Whoop Lite Bundle
Camera: Wanlksnail Avatar Nano Camera/HDZero Nano Lite Camera


Note: F4 1S 5A FC (Serial ELRS 2.4G) V2.0 does not support external receivers. F4 1S 5A FC (SPI Frsky) V3.0 is available to connect an external receiver and can be used as PNP. Please make sure that the battery voltage must be 3V at least when flying, otherwise, the HD digital VTX would stop working. 
HD Digital VTX System
There are two HD versions to choose from. Based on Walksnail Avatar, the Walksnail Avatar Mini HD VTX also uses H.265 high-efficiency video coding, an industry-leading technology, providing 1080P/60FPS image recording with 22ms ultra-low latency. It is specially designed for 3.1-5V power input and 10g lightweight, which is compatible with 1S whoop drone. Build-in 8 GB storage, the Avatar Mini HD VTX has the capability of recording HD video without interference from capacity and exporting video by USB cable. Besides, with Canvas Mode on Avatar Mini HD VTX, Betaflight full OSD display is supported and can be adjusted easily by remote control.

HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g. The HDZero Whoop lite Bundle supports 1-3S power input with 25mW/200mW RF power and is capable of recording in 720P/60FPS with super low latency of less than 19ms. What's more, pilots can activate and configure its OSD function on Betaflight Configurator.

Injection Molded Canopy for HD Camera
Micro Canopy for HD Camera is specially designed to be compatible with Walksnail or HDZero HD digital VTX and has an adjustable camera lens of 0-45°. With the injection molding technique, the canopy is very durable and flexible for crash resistant. Besides, the hollow-out design not only reduces the influence of heat on electronic parts but also is available to be armed with decorative parts we prepared.

New 1102 18000KV Motors
1102 18000KV motors have a great balance between weight and power on 75mm 1S whoop drones. Only 2.9g with connectors. With the high 18000KV, it could have a great punch power even with only 1S battery. Also, it adopts a PCB connector to allow you to repair it easier once cables are disconnected.

Flight Controller
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75 HD. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.





Meteor75 HD (ELRS)

Meteor75 HD (Frsky, PNP, TBS)


FC Inside
F4 1S 5A FC (Serial ELRS 2.4G) V2.0
F4 1S 5A FC (SPI Frsky) V3.0


Gyro
BMI270
BMI270


FC Firmware
BETAFPVF411
BETAFPVF411RX


UART Port
One UART Port
Two UART Ports


External RX
Not Supported
Supported



Note: Pay attention, ONLY the newest Betaflight firmware 4.3.1 start to support this BMI270 gyrometer. Please check the below link to download the firmware and CLI dump file. If you update the 4.3.1 firmware from Betaflight official site, please flash the CLI dump file for Meteor75 HD.
Download the FC firmware and CLI dump file for Walksnail and HDZero version.
Recommended Parts

Radio Transmitter: LiteRadio 3 Pro, LiteRadio 3, LiteRadio 2 SE
Battery: BT2.0 450mAh 1S 30C Battery, BT2.0 550mAh 1S Battery
Props: 40mm 3-Blade Propellers (1.5mm Shaft)
Colorful Frame: Meteor75 Micro Brushless Whoop Frame

Colorful Canopy: Micro Canopy for HD Camera

Sticker: BETAFPV Waterslide Decals

Charger: 6 Ports 1S Battery Charger &amp Adapter

Screws: Meteor Series Motor Fixing Screws Pack (40PCS)

BT2.0 Series Accessories

FAQ

Pilots can read and export the recording videos from Walksnail VTX by a 4-pin connector. Below is the diagram picture. For more information, please refer to the manual for it.



Click to download the manual for Walksnail Avatar Mini VTX.
Click to download the manual for HDZero Whoop Lite Bundle.

Package

1 * Meteor75 Brushless Whoop Quadcopter (Walksnail or HDZero HD Digital VTX)
2 * 450mAh 1S 30C Battery with BT2.0 Connector
1 * Type-C USB Cable
1 * BT2.0 Battery Charger and Voltage Tester
4 * 40mm 3-Blade Props (1.5mm Shaft)
1 * Screwdriver
1 * Walksnail VTX USB Cable (For Walksnail Version)
1 * HDZero VTX USB Cable (For HDZero Version)
1 * Pack of Screws

Note: The propellers in the package were modified from three holes to one hole.



Meteor75 Brushless Whoop Quadcopter (1S HD Digital VTX)

Meteor75, a better approach to the 75mm micro drone which features high KV motors - 1102 18000KV motors & BT2.0 450mAH battery, giving pilots plenty of power to use both indoor and outdoor spaces as a small scale acro playground.

BetaFPV Meteor75 1S Brushless Whoop Quadcopter

All products containing batteries must be shipped by a ground shipping method.
Want a 1S whoop for outdoor, around the house and the yard? Meteor75 Brushless Whoop Quadcopter would be your best choice! This whoop quadcopter is equipped with the ultralight F4 1S 5A FC (2022). The canopy has a special design and high-quality C03 FPV camera combined with 0802SE 19500KV motors make it perfectly balanced in all areas of performance.
Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!
Features

Meteor75 is the first generation whoop powered by a brand-new BT2.0 connector 450mAh battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compared with the initial PH2.0 connector
The power system uses the latest 0802SE 19500KV motors and 40mm 2-blade props, which provides pilots a powerful indoor and outdoor flight.
Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
Reserve two UART ports on F4 1S 5A FC (SPI Frsky) board.
The various colors of the spare parts including the 75mm frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.


BT2.0 Connector
BETAFPV has exclusively designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has a longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.

Flight Controller
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP and can be switched to Futaba SFHSS protocol through Betaflight configurator. The ESC on the new board powered by BB51 hardware in place of BB21 comes with Bluejay 96k ESC firmware, allowing 0802SE 19500KV motors to give full play to the efficiency of power. We update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.
Meteor75: (Frsky)
FC Inside:F4 1S 5A FC (SPI Frsky)Gyro: BMI270FC Firmware: BETAFPVF411RXUART Port: Two UART PortsExternal RX: Supported
C03 Camera
C03 FPV Micro Camera is 1.45g ultralight weight and a great camera for indoor micro FPV quadcopters. It features a 1200TVL definition with 1/3&quot CMOS sensor, 2.1mm lens for 160° FOV, and excellent latency, which boasts high-quality, clear and sharper images through your goggles.

Motors
0802SE 19500KV Motor motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight to only 1.88g/pc but ensures excellent performance of power and thrust. It makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time.
 

Frame
This frame is ultralight at only 5.68g and still durable. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery. BETAFPV offers various colors of Meteor75 frames for options, making DIY easier.

Specifications

Item: Meteor75 Brushless Whoop Quadcopter (2022)
FC&ampampESC:F4 1S 5A FC (SPI Frsky)
Frame: Meteor75 Frame
Motors: 0802SE Brushless Motor
Props: 40mm 2-Blade Propellers (1.0mm Shaft)
Camera: C03 FPV Camera
Tilt: 30° (default)/20° (optional)
Canopy: Canopy for Micro Camera 2022 version
Receiver Option: Frsky
VTX: M03 25-350mW VTX
Battery: BT2.0 450mAh 1S 30C Battery
Flight time: 6 mins (stable flying) / 4.5 mins (acro flying)
Weight: 24.98g

Includes

1x BetaFPV Meteor75 Whoop Quadcopter (2022) - FRSKY
2x 450mAh 1S 30C Battery with BT2.0 connector
1x BT2.0 Battery Charger and Voltage Tester
1x TypeC USB cable
1x Customized Carry Case
1x Spare 40mm 2-Blade props (1.0mm Shaft)
1x Screwdriver
3x Decorative Parts
1x 20° Lens Camera Mount for C03 Camera
1x 30° Lens Camera Mount for C02 Camera
1x Pack of Screws



All products containing batteries must be shipped by a ground shipping method. Want a 1S whoop for outdoor, around the house and the yard? Meteor75 Brushless Whoop Quadcopter would be your best choice! This whoop quadcopter is equipped with the ultralight F4 1S 5A FC (2022). The canopy has a special design and high-qua

BetaFPV BNF Meteor75 1S Analog Whoop (2022) - FRSKY from WREKD Co.

BetaFPV BNF Meteor75 1S Analog Whoop (2022) - FRSKY

The classical Meteor75 Brushless Whoop Quadcopter comes with Walksnail Avatar Mini HD VTX bringing conspicuous images and exceptional visuals to your eyes and capturing details that make the footage look as exciting as the flight.

BetaFPV Meteor75 1S Brushless Whoop HD w/ Walksnail Avatar Mini VTX

The classical Meteor75 Brushless Whoop Quadcopter comes with HDZero Lite VTX bringing conspicuous images and exceptional visuals to your eyes and capturing details that make the footage look as exciting as the flight.

BetaFPV Meteor75 1S Brushless Whoop HD w/ HDZero 

All products containing batteries must be shipped by a ground shipping method.
Want a 1S whoop for outdoor, around the house and the yard? Meteor75 Brushless Whoop Quadcopter would be your best choice! This whoop quadcopter is equipped with the ultralight F4 1S 5A FC (2022). The canopy has a special design and high-quality C03 FPV camera combined with 0802SE 19500KV motors make it perfectly balanced in all areas of performance.
Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!
Features

Meteor75 is the first generation whoop powered by a brand-new BT2.0 connector 450mAh battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compared with the initial PH2.0 connector
The power system uses the latest 0802SE 19500KV motors and 40mm 2-blade props, which provides pilots a powerful indoor and outdoor flight.
Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
Reserve two UART ports on F4 1S 5A FC (SPI Frsky) board.
The various colors of the spare parts including the 75mm frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.


BT2.0 Connector
BETAFPV has exclusively designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has a longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.

Flight Controller
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP and can be switched to Futaba SFHSS protocol through Betaflight configurator. The ESC on the new board powered by BB51 hardware in place of BB21 comes with Bluejay 96k ESC firmware, allowing 0802SE 19500KV motors to give full play to the efficiency of power. We update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.
Meteor75: (Frsky)
FC Inside:F4 1S 5A FC (SPI Frsky)Gyro: BMI270FC Firmware: BETAFPVF411RXUART Port: Two UART PortsExternal RX: Supported
C03 Camera
C03 FPV Micro Camera is 1.45g ultralight weight and a great camera for indoor micro FPV quadcopters. It features a 1200TVL definition with 1/3" CMOS sensor, 2.1mm lens for 160° FOV, and excellent latency, which boasts high-quality, clear and sharper images through your goggles.

Motors
0802SE 19500KV Motor motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight to only 1.88g/pc but ensures excellent performance of power and thrust. It makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time.
 

Frame
This frame is ultralight at only 5.68g and still durable. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery. BETAFPV offers various colors of Meteor75 frames for options, making DIY easier.

Specifications

Item: Meteor75 Brushless Whoop Quadcopter (2022)
FC&ampESC:F4 1S 5A FC (SPI Frsky)
Frame: Meteor75 Frame
Motors: 0802SE Brushless Motor
Props: 40mm 2-Blade Propellers (1.0mm Shaft)
Camera: C03 FPV Camera
Tilt: 30° (default)/20° (optional)
Canopy: Canopy for Micro Camera 2022 version
Receiver Option: Frsky
VTX: M03 25-350mW VTX
Battery: BT2.0 450mAh 1S 30C Battery
Flight time: 6 mins (stable flying) / 4.5 mins (acro flying)
Weight: 24.98g

Includes

1x BetaFPV Meteor75 Whoop Quadcopter (2022) - FRSKY
2x 450mAh 1S 30C Battery with BT2.0 connector
1x BT2.0 Battery Charger and Voltage Tester
1x TypeC USB cable
1x Customized Carry Case
1x Spare 40mm 2-Blade props (1.0mm Shaft)
1x Screwdriver
3x Decorative Parts
1x 20° Lens Camera Mount for C03 Camera
1x 30° Lens Camera Mount for C02 Camera
1x Pack of Screws



Pre-Built Quad Kit Type

Pre-Built Quads and Kits

Quad Frame Size

Quad Type

Happymodel

Happymodel BNF Mobula 7 HD Whoop

HDZero

HDZero has officially teamed up with Happymodel to bring you another top-of-the-line competitor in the 75mm brushless whoop lineup... the&nbspHDZero Mobula7!

HDZero has officially teamed up with Happymodel to bring you another top-of-the-line competitor in the 75mm brushless whoop lineup... the HDZero Mobula7!

HDZero Mobula7 2-3S 75mm Brushless Micro Whoop BNF w/ ELRS Receiver

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

Mobula 7 HDZero with ELRS Receiver - RMRC

Mobula 7 HDZero with ELRS Receiver

With its built-in RunCam Split 3 Lite FPV cam, the Mobula7 HD Brushless Whoop will take you to hard-to-get places and give you the HD experience you are looking for!

Happymodel Mobula7 HD 2-3S Brushless Whoop Micro Drone

This Happymodel Mobula7 is a 1S HD micro whoop with a RunCam Split 3 Lite Camera.

Happymodel Mobula7 1S 75mm HD Whoop

Happymodel BNF Mobeetle6 65mm 2-in-1 Whoop

The Happymodel Mobeetle6 BNF is the next innovation in the micro whoop and toothpick drone community! The Mobeetle frame is easily converted from whoop to drone with the included frame parts and race canopy.

Happymodel Mobeetle6 1S 65mm 2-in-1 Whoop Drone

Happymodel BNF Mobula 7 Whoop

HAPPYMODEL

Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoop season.  This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX ranges by using this flight controller. The new RS0802 motors come with a new unibell design, uses a 1.5mm shaft, and includes a PCB bottom plate, which means high efficiency, and much more reliability.
Check out the rest of pre-built quads and our HappyModel selection!
Features

X12 5-IN-1 AIO flight controller w/ built-in receiver and OpenVTX
VTX Power up to 400mw
RS0802 20000KV motors
RunCam Nano 3. The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible with 1S Lipo/LIHV

Specifications

Input Voltage: 1S
Max Continuous Current: 12A
Motors: 0802 20000KV
Camera: RunCam Nano 3
Wheelbase: 75mm
Dimensions: 99x99x40mm
Weight: 24g

Includes

1x HappyModel BNF 1S Mobula 7 Whoop



The all-new HappyModel BNF 1S Mobula 7 Whoop features the latest parts to bring you a fun, exciting whoop to fly. Get it shipped fast and free from RDQ!

HappyModel BNF 1S Mobula7 Analog Whoop - Choose Receiver Type

HappyModel BNF 1S Mobula 7 Whoop for Sale - RaceDayQuads

This&nbspHappymodel Mobula7&nbspis a 1S micro whoop with a RunCam Nano 3 Camera. This whoop features the first 5-in-1 AIO with three different receiver options and 0802 20000KV motors with a unibell design.

This Happymodel Mobula7 is a 1S micro whoop with a RunCam Nano 3 Camera. This whoop features the first 5-in-1 AIO with three different receiver options and 0802 20000KV motors with a unibell design.

Happymodel Mobula7 1S 75mm Analog Whoop

HappyModel

Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoop season.  This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX ranges by using this flight controller. The new RS0802 motors come

HappyModel BNF 1S Mobula7 Analog Whoop - Choose Receiver Type from WREKD Co.

We’re glad to launched our new Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season. The world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENV

Happymodel Mobula7 1s 75mm Analog FPV Brushless Whoop Drone - Choose Receiver

iFlight

iFlight BNF Alpha A65 65mm Brushless Whoop

The&nbspiFlight&nbspAlpha A65 V2&nbspis an even smaller size 65mm lightweight 24.5g whoop. This version features an updated canopy, frame, motors, AIO Board, and camera.

The iFlight Alpha A65 V2 is an even smaller size 65mm lightweight 24.5g whoop. This version features an updated canopy, frame, motors, AIO Board, and camera.

iFlight Alpha A65 Drone - Analog - V2 

Flywoo

Flywoo BNF CineRace20 V2 Neon LED 2" Analog Cinewhoop

The&nbspFlywoo CineRace20 HD&nbspnow features&nbspNeon LEDs!&nbspThe CineRace20 V2 has now&nbspupgraded from 3400kv to 4850kv motors for same flight time, but more power. Added buzzer, and low voltage alarm.

The Flywoo CineRace20 HD now features Neon LEDs! The CineRace20 V2 has now upgraded from 3400kv to 4850kv motors for same flight time, but more power. Added buzzer, and low voltage alarm.

Flywoo CineRace20 V2 Neon LED 2" 4S Analog CineWhoop w/ Caddx Ant

Flywoo CineRace20 V2 Neon LED 2&quot 4S Analog CineWhoop w/ Caddx Ant

FLYWOO

MAIN CHANGELOG  :  Upgraded 1203Pro 3400KV to 1203Pro 4850KV . Same flight time more power Add Buzzer. Low voltage alarm out of control alarm CineRace20 a new concept and more than a cinewhoop  . Inspired by RaceWhoop designed by Free Zillion.  This is a combinathion of CineWhoop and RaceWhoop! CineRace is double duct 

CineRace20 V2 Neon Led Analog Pro w/ Caddx Baby Ratel 2

CineRace20 v2 Neon LED Analog w/ Caddx Ant 2inch

The Flywoo CineRace20 Analog Pro now features Neon LEDs! The CineRace20 V2 has now upgraded from 3400kv to 4850kv motors for same flight time, but more power. Added buzzer, and low voltage alarm.

Flywoo CineRace20 V2 Neon LED 2" 4S Analog Pro CineWhoop w/ Caddx Baby Ratel V2

Flywoo CineRace20 V2 Neon LED 2&quot 4S Analog Pro CineWhoop w/ Caddx Baby Ratel V2

Flywoo BNF CineRace20 V2 Neon LED 2" HD Cinewhoop

Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a  drone that can not only race but also capture stable videos and at the same time achieve a super long flight time! A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites. You will see on the front of the quad Flywoo engineer the use of the soft TPU material to mount the camera to prevent the jello effect, by reducing the over all vibrations in the quad.
Come see our  Cinewhoop Collection and other great products from Flywoo!
We also carry a version with the O3 Air Unit already installed here.
Features

Almost all parts are injection molded for a more sturdy and durable quad.
Very easy to disassemble, only fixed by two aluminum columns
Customizable with LEDs
GPS up to 30 satellites
Innovative duct design
Sub250 (even with battery)











Specifications


Input Voltage: 4S

Model: CineRace20 HD DJI O3 2inch (without Air Unit)
Brand: FLYWOO
Frame: CineRace20 O3 (Different fromCineRace20 V1.2\V2 frame )
Charge connector: XT30
Motor: NIN V2 1203PRO 4850Kv

Propeller: D51-5 51mm 
Buzzer : 5PCS Active Alarm Buzzer 
GPS: GOKU GM10 Nano V3 GPS 
Weight: 139g (without battery)
Betaflight Firmware target: FLWO/FLYWOOF405S_AIO(SMT32F405)

Recommended Battery:Explorer 450mah 4S ( flight time  5mins ) Explorer 750mah 4S ( flight time  6mins ) 


GOKU GN F405S 20A AIO

Input Voltage: 2-6S Lipo
MCU: STM32F405 BGA

IMU: ICM42688 

OSD: BetaFlight OSD 
Blackbox: 16Mb Flash
Baro: BMP280
BEC: 5V
6 hardware UARTS (UART1,2,3,4,5,6)

Onboard LED：4x WS2812
Support BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

FPV System

Add your own O3 Air Unit

Includes

1 x Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP
8 x D51-5 props
2 x Battery strap  9x150mm \ 9x200mm

1 x Set of screws
1 x 90° USB Type-C 



Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card. The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a  drone that can not only race but also capture stable vi

Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP

**Please note: This version without vista HD system . You need to install it yourself. Everything else has been installed and tested. Recommended: Caddx Nebula Pro Nano vista  Caddx Polar Nano Vista MAIN CHANGELOG  :  Upgraded 1203Pro 3400KV to 1203Pro 4850KV . Same flight time more power Add Buzzer. Low voltage alarm 

CineRace20 V2 Neon Led DJI HD 2inch (without Caddx Vista HD System

CineRace20 V2 Neon Led DJI HD  2inch (without Caddx Vista HD System

Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP from WREKD Co.

Flywoo CineRace20 V2 Neon LED 2" 4S HD CineWhoop w/ Caddx Polar Nano Vista

Flywoo CineRace20 V2 Neon LED 2&quot 4S HD CineWhoop w/ Caddx Polar Nano Vista

EMAX

EMAX RTF EZ Pilot Pro Kit - Goggles, Radio Transmitter, 75mm Whoop

Consistent improvement is the goal of our team at EMAX but this comes at a cost. With more upgrades to our micro indoor racing drones which cater to more experienced pilots, we further alienate potential budding pilots looking to explore the world of FPV. This is why our engineers have come up with a solution through t

EMAX EZ Pilot Pro Indoor Racing Drone - RTF

Emax USA

 

 
 
 
Drone Specs:

Wheelbase: 75mm
Dry weight: 32.5g
AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter
Motor: 08025 II KV15000
RX Protocol: FrSky D8 SPI

Includes:

1x EZ Pilot Pro Drone
1x E8 Transmitter
1x Transporter 2 Non-DVR Version
1x Monitor Mounting Hardware
1x EMAX 1S 450 mAh LiPo battery
1x 6-Port 1S USB LiPo Battery Charger
1x USB Cable for Charging + Programming
1x Set Spare Turtlemode Propellers
1x Set Spare Hardware

        Drone Specs: Wheelbase: 75mm Dry weight: 32.5g AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter Motor: 08025 II KV15000 RX Protocol: FrSky D8 SPI Includes: 1x EZ Pilot Pro Drone 1x E8 Transmitter 1x Transporter 2 Non-DVR Version 1x Monitor Mounting Hardware 1x EMAX 1S 450 mAh LiPo batt

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles from WREKD Co.

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles

The EZ Pilot Pro drone features an improved frame, 200mw VTX capabilities, and a solid pin PH2.0 connector over the original.

EMAX EZ Pilot Pro Beginner FPV Drone RTF Kit w/ Transporter 2 Goggles + E8 Transmitter

Flywoo BNF Firefly Hex Nano 1.6" Hexacopter

Flywoo has designed the smallest hexacopter in their history! The Firefly Hex Nano is a nano-sized FPV drone designed to carry the Insta 360 Go or SMO 4K series action cameras. Weighing in at just 57.9g, the Firefly Hex Nano is small, flexible, and stable while remaining full of power with unmatched control. Pilots can quietly enjoy the fun of shooting a video without jelly.

Flywoo has designed the smallest hexacopter in their history! The Firefly Hex Nano is a nano-sized FPV drone designed to carry the Insta 360 Go or SMO 4K series action cameras. Weighing in at just 57.9g, the Firefly Hex Nano is small, flexible, and s

Flywoo Firefly Hex Nano 1.6" 4S  BNF Micro Hexacopter w/ Atomic Antenna - Analog

Flywoo Firefly Hex Nano 1.6&quot 4S  BNF Micro Hexacopter w/ Atomic Antenna - Analog

The&nbspFirefly Hex Nano Analog V1.2&nbspis a nano-sized FPV drone designed to carry the Insta 360 Go or SMO 4K series action cameras. Weighing in at just 57.9g, the Firefly Hex Nano is small, flexible, and stable. Now with&nbspNin V2 1203Pro 5500KV Motors and upgraded propellers!

The Firefly Hex Nano Analog V1.2 is a nano-sized FPV drone designed to carry the Insta 360 Go or SMO 4K series action cameras. Weighing in at just 57.9g, the Firefly Hex Nano is small, flexible, and stable. Now with Nin V2 1203Pro 5500

Flywoo Firefly Hex Nano 1.6" Micro Hexacopter Analog w/ Caddx Ant - 4S - V1.2

Flywoo Firefly Hex Nano 1.6&quot Micro Hexacopter Analog w/ Caddx Ant - 4S - V1.2

Flywoo BNF Firefly Hex Nano 1.6" HD Hexacopter

The Flywoo Firefly Hex Nano HD is a nano-sized FPV drone designed to carry the&nbspInsta360 GO&nbspor&nbspSMO 4K&nbspseries action cameras. Euipped with a GOKU F745 HEX 13A STACK and six ROBO 1202.5 5500KV motors to bring you Firefly flight characteristics!

The Flywoo Firefly Hex Nano HD is a nano-sized FPV drone designed to carry the Insta360 GO or SMO 4K series action cameras. Euipped with a GOKU F745 HEX 13A STACK and six ROBO 1202.5 5500KV motors to bring you Firefly flight chara

Flywoo Firefly Hex Nano 1.6" 4S BNF Micro Hexacopter w/ Atomic Antenna - HD

Flywoo Firefly Hex Nano 1.6&quot 4S BNF Micro Hexacopter w/ Atomic Antenna - HD

The&nbspFlywoo Firefly Hex Nano HD V1.2&nbspis a nano-sized FPV drone designed to carry the&nbspInsta360 GO&nbspor&nbspSMO 4K&nbspseries action cameras. Weighing in at just 74g, the Firefly Hex Nano is small, flexible, and stable. Now with updated motors and a Caddx Nebula Pro Nano Camera!

The Flywoo Firefly Hex Nano HD V1.2 is a nano-sized FPV drone designed to carry the Insta360 GO or SMO 4K series action cameras. Weighing in at just 74g, the Firefly Hex Nano is small, flexible, and stable. Now with upda

Flywoo Firefly Hex Nano 1.6" Micro Hexacopter HD w/ Nebula Pro Nano - 4S - V1.2

Flywoo Firefly Hex Nano 1.6&quot Micro Hexacopter HD w/ Nebula Pro Nano - 4S - V1.2

Flywoo BNF Firefly Baby HD V1.2 1.6" Quadcopter

The Firefly Baby Quad&nbspV1.2 now features the Caddx Nebula Pro Nano Camera, GOKU F745 13A Stack, NIN V2 1203 3500KV Pro Motors, and Gemfan 1636 40mm 4-Blades Props!

The Firefly Baby Quad V1.2 now features the Caddx Nebula Pro Nano Camera, GOKU F745 13A Stack, NIN V2 1203 3500KV Pro Motors, and Gemfan 1636 40mm 4-Blades Props!

Flywoo Firefly Baby 80mm 1.6" 4S Micro Quadcopter BNF V1.2 - HD

Flywoo Firefly Baby 80mm 1.6&quot 4S Micro Quadcopter BNF V1.2 - HD

Flywoo BNF CineRace20 V1.2 HD 2" Quadcopter

MAIN CHANGELOG  :  Upgraded camera bracket super durable. Added Neon Led enjoy the fun of indoor racing and flying at night! Added 12V BEC with switch You can choose to turn on the LED or turn off CineRace20 Frame kit is redesigned by the Flywoo team with a lot of attention to detail.  Inspired by RaceWhoop designed by

CineRace20 V1.2 Neon Led Frame kits For Walksnail Avatar version

The&nbspFlywoo CineRace20 HD&nbspis a new concept and more than just a cinewhoop. Inspired by RaceWhoops and designed by&nbspFree Zillion, this is a combination of both CineWhoop and RaceWhoop!

The Flywoo CineRace20 HD is a new concept and more than just a cinewhoop. Inspired by RaceWhoops and designed by Free Zillion, this is a combination of both CineWhoop and RaceWhoop!

Flywoo CineRace20 V1.2 Neon LED 2" 4S HD Cinewhoop 

Flywoo CineRace20 V1.2 Neon LED 2&quot 4S HD Cinewhoop 

Happymodel BNF Mobula 6 Micro Whoop

ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable. Now we are about to release Mobula6 equipped with ExpressLRS RC link system, the new Mobula6 elrs would coming out with a new 0802 brushless motor, 

Happymodel Mobula6 ELRS 2.4GHz 1s 65mm Brushless FPV Brushless Whoop Drone - Choose Version

The Mobula6 Micro FPV Whoop features the Runcam Nano3, Onboard Frsky Receiver, 5A BLheli_S 4-in-1 ESC, and more! This mini and lightweight whoop (65mm) will take you hard-to-get places!
Pick a motor: Race (25000Kv) or Standard (19000Kv).
Check out our other pre-built quads, as well as the rest of our HappyModel selection!
Features

AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless whoop only 20g
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible with 1S Lipo/LIHV
Camera Angle adjustable

Specifications

Brand Name: Happymodel
Item Name: Mobula6 1S 65mm Brushless whoop drone BNF version
Wheelbase: 65mm
Size: 80mmx80mmx37mm
Weight: 20g
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Motor speed option:
SE0802 KV25000(Race Edition)
SE0802 KV19000(Regular Edition)

Motors

Model: SE0802 19000KV or KV25000
Configuration:9N12P
Stator Diameter:8mm
Stator Length:2mm
Shaft Diameter: Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.9g
No.of Cells(Lipo):1S only

Propellers

Gemfan 1219-3
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Weight:0.28g

Flight controller

(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM42688P
Board size: 28.5x28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 4in1 ESC

MCU upgraded to ICM42688P
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version

SPI BUS receiver Frsky D8 compatible
Compatible Non-EU transmitter D8 modelChannels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m


Onboard 5.8g VTX

Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race bandSmartaudio ready

Runcam Nano3

Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: NTSC
S/N Ratio: &ampgt50dBElectronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power: DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mmxW14mmxH9mm

Lipo Battery

Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8gConnector: PH2.0

Includes

1x Mobula6 1S 65mm whoop Drone Frame 
1x SPI Receiver: Crazybee F4 Lite FC built-in Frsky SPI D8 RX 
4x SE0802 KV19000 or KV25000 brushless motor 
1x Gemfan 1219-3 Propellers(4cw+4ccw) 
1x Runcam Nano3 1/3 CMOS 800TVL camera 
1x 5.8G 25mw 40ch VTX (Flight controller built-in) 
4x 1S 300mah 30C LiHV Battery 
1x 1S Lipo/LIHV USB Charger 
1x Propeller disassemble tool


The Mobula6 Micro FPV Whoop features the Runcam Nano3, Onboard Frsky Receiver, 5A BLheli_S 4-in-1 ESC, and more! This mini and lightweight whoop (65mm) will take you hard-to-get places! Pick a motor: Race (25000Kv) or Standard (19000Kv). Check out our other pre-built quads, as well as the rest of our HappyModel selecti

HappyModel BNF Mobula6 1S Analog Whoop (SPI FrSky) - Choose Kv from WREKD Co.

HappyModel BNF Mobula6 1S Analog Whoop (SPI FrSky) - Choose Kv

The Happymodel Mobula6 1S Whoop is a great racing FPV drone! The Mobula6 is a smooth and agile brushless drone that comes with the RunCam Nano 3, 0802 19000KV Motors, and many other cool features and specs that make this whoop a must-have! Now with Built-In ELRS Receivers!

The Happymodel Mobula6 1S Whoop is a great racing FPV drone! The Mobula6 is a smooth and agile brushless drone that comes with the RunCam Nano 3, 0802 19000KV Motors, and many other cool features and specs that make this whoop a must-have! Now with 

Happymodel Mobula6 1S 65mm Brushless Whoop w/ RunCam Nano 3 - ELRS

With one of the best (if not THE best) nano cameras the Runcam Nano3 and significantly lighter than its competitors Mobula 6 is a serious contender in the whoop racing scene.Available in 2 different KV options25000KV for crazy fast races19000KV for great all around performance and racing Check out our Mobula 6 and Part

HappyModel BNF Mobula 6 1S Micro Whoop Quadcopter (Choose RX & Version)

EMAX BNF TinyHawk III 76mm Whoop

Introducing... the EMAX TinyHawk III BNF Quadcopter!! This BNF features the RunCam Nano 4 Camera.

EMAX TinyHawk III FPV Racing Drone BNF

        Size class: 76mm Weight (without battery): 32 grams Motors: TH0802 II 15000kv Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC Receiver:  SPI / FrSky D8/D16 Camera: RunCam Nano 4 Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.

Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF)

Self-improvement is a core trait for the engineers at EMAX, which is why when approached about a new successor to the Tinyhawk series, they designed the Tinyhawk III to build upon all the strengths of previous generations while improving any shortcomings. First is a drastically redesigned body frame centered around dur

Emax Tinyhawk 3 FPV Racing Drone - FrSky Bind N Fly (BNF)

EMAX Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF)

EMAX Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF) - RMRC

EMAX RTF TinyHawk III Ready to Fly Kit w/ Goggles, Radio Transmitter, Case and 76mm Racing Whoop Drone

Emax Tinyhawk 3 FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

Introducing... the&nbspEMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

Introducing... the EMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

EMAX TinyHawk III FPV Racing Drone RTF Bundle

 

 
 
Size class: 76mm
Weight (without battery): 32 grams
Motors: TH0802 II 15000kv
Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC
Receiver:  SPI / FrSky D8/D16
Camera: RunCam Nano 4
Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.
 
 

      Size class: 76mm Weight (without battery): 32 grams Motors: TH0802 II 15000kv Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC Receiver:  SPI / FrSky D8/D16 Camera: RunCam Nano 4 Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.    

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles from WREKD Co.

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggles

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggl - RMRC

Flywoo BNF Firefly Baby 1.6" Quadcopter

The Firefly Baby Quad V1.2 is a nano-sized FPV drone that is designed to carry Insta360 GO,&nbspSMO 4K camera,&nbspand many other small action&nbspcameras!&nbspThe V1.2 now features the Caddx Ant Camera,&nbspGOKU F745 13A Stack, NIN V2 1203 3500KV Pro Motors, and Gemfan 1636 40mm 4-Blades Props!

The Firefly Baby Quad V1.2 is a nano-sized FPV drone that is designed to carry Insta360 GO, SMO 4K camera, and many other small action cameras! The V1.2 now features the Caddx Ant Camera, GOKU F745 13A Stack, NIN V2 1203 3500

Flywoo Firefly Baby 80mm 1.6" 4S Micro Quadcopter BNF V1.2 - Analog

Flywoo Firefly Baby 80mm 1.6&quot 4S Micro Quadcopter BNF V1.2 - Analog

BetaFPV RTF Cetus Pro FPV Kit - Cetus Pro Whoop, Goggles, Transmitter, Batteries, Charger & Case

The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, it's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor.

Bullet Point

The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV. 
Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train.
With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight. 
Made of PA12 material, the frame has an excellent impact resistance in drop &amp impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors.
All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry. 




Altitude Hold, Easy to Fly
The altitude hold function enables Auto-Hover. This quadcopter can stay at a current height when pilots' hands are off the transmitter. Barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner! 
The altitude hold function is only available in N mode.

Self-protection, No More Dangers
The quadcopter comes with an excellent self-protection function. It can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once there is a strong collision with the object. Let's say goodbye to loss and crash!

Turtle Mode, No Burden to Fly Away
When the quadcopter falls to the ground and upside down, we can active turtle mode by LiteRadio2 SE transmitter to flip it over and resume flying. With this function, there is no need to walk away to correct the position manually.
Turtle mode will not work effectively if something gets stuck in the motor/prop. Please push down switch SD on the transmitter immediately in this situation to exit turtle mode. 

3 Flight Modes, From Zero to Hero
Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus Pro FPV Kit helps anyone fly confidently from day one. These 3 flight modes can be switched by one SB switch on transmitter, which is simple and convenient. Meanwhile, all modes support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter.

Cetus Pro Brushless Quadcopter
Equipped Lite 1-2S Pro brushless flight controller with 12A ESC, matching with 1102 18000KV brushless motors and 40mm 3-blade props, which is absolutely more powerful and maneuverable. Turtle mode greatly makes FPV racing training smooth and convenient.

FPV Simulator Supported
LiteRadio2 SE radio transmitter can be used as a USB Joystick when connected to the computer. So it's available to play FPV simulators like EREADRONE, LIFTOFF. More convenient for practicing and charging at the same time. Besides, the transmitter is more ergonomic with a hobby-grade gimbal and adopted the rubber coat.

New to FPV? No worries. Our new Cetus Pro FPV Kit will take you from zero to hero in no time.This is a very different drone from BETAFPV. It's a brushless whoop drone designed from the ground up for FPV beginners. With three modes, you can start your FPV journey at a stable, basic level – and then progress. If you’ve ever felt that FPV is too difficult to tackle, this is the solution for you.
Click here to know more about LIFTOFF.
Download LIFTOFF.

VR02 FPV Goggles
VR02 FPV Goggles- the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, it fits your face and head perfectly.

Specification

Positioning system: Optical flow/ Barometer/ Laser
Height positioning: Laser/ Barometer
Position locating: Optical flow (effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Quad: Cetus Pro Brushless Quadcopter

Frame: Cetus Pro Brushless Whoop Frame

Flight controller: Lite 1-2S Pro brushless FC
VTX: 25mW
Camera tilt degree: 30°
Camera: C02 FPV Micro Camera

Transmitter: Literadio2 SE Transmitter

TX mode: Mode 1 &amp Mode 2 optional
Goggles: VR02 Goggles

Motor: 1102-18000KV Brushless motor

Propeller: 40mm 3-blade 1.5mm shaft hole
Takeoff weight: 33.19g (without battery)
Power system: 1S
Battery: BT2.0 450mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (in wide &amp undisturbed environment)

FAQ


Top questions that customers frequently asked about Cetus Pro.

For more info and instructions, please check the User Manual for Cetus Pro FPV Kit 

Recommend the newest BT2.0 550mAh 1S Battery. More flight time and higher discharge rate.

Note: Pilots should remove the battery plate if installing the 550mAh battery on Cetus Pro.
Package

1 * Cetus Pro Brushless Quadcopter  
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol) 
1 * VR02 FPV Goggles   
2 * BT2.0 450mAh 1S Lipo Battery     
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 *  40mm 3-blade Props

2 * User Manual
1 * Portable Storage Bag
1 * Phillips Screwdriver

Note: The propellers in the package were modified from three holes to one hole.


Recommended by 5000+ experts and reviews, one of the most popular fpv kits for beginners.Best price and stable quality for fpv drone. The Cetus Pro FPV Kit FPV drone is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles

Cetus Pro FPV Kit

The BETAFPV Cetus Pro FPV Kit is&nbspfinally&nbsphere! It is the best ideal choice for beginners to advance currently. The Cetus Pro FPV Racing Kit comes with the Cetus brushed whoop quadcopter,&nbspLiteRadio2 SE transmitter, and&nbspVR02 FPV Goggles.

The BETAFPV Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. The Cetus Pro FPV Racing Kit comes with the Cetus brushed whoop quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Gog

BETAFPV Cetus Pro FPV Brushless Whoop Racing Kit

The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, it's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor. Check out all our 

BetaFPV Cetus PRO FPV RTF Kit W/Goggles & Controller

BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case

BetaFPV's Ready-To-Fly Cetus FPV Kit is the perfect starter kit!
Kit Includes

1 * Cetus Brushed Quadcopter                             
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)                        
1 * VR02 FPV Goggles   
2 * BT2.0 300mAh 1S Lipo Battery     
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 31mm 4-Blade Props
2 * User Manual
1 * Portable Storage Bag

Bullet Points

Auxiliary flight function is suitable for beginners, greatly reducing the threshold of operating. Now everyone can fly!
Including N-Mode, S-Mode, M-Mode, which can satisfy different needs of pilots and adapt to various flight environments.

Cetus brushed quadcopter, LiteRadio2 SE transmitter, VR02 FPV Goggles, batteries, charger, etc., everything needed for flight is included. 
Equipped with Type-C port charging cable, unified charging port for all parts, more convenient for charging.
All items are stored in an EVA portable storage bag, which provides better protection and is easy to carry.


Specification


Positioning system: Optical flow / Barometer / Laser


Height Positioning: Laser / Barometer

Angle Locating: Optical flow ( effective height 0.3-3m)

Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)

Receiver protocol: Frsky D8
Flight controller: Lite 1S Pro brushed FC
VTX: 25mW

Camera tilt degree: 25°

Camera: C02 FPV Micro Camera
Transmitter: Literaio2 SE Transmitter

TX mode: Mode 2 (Left stick throttle)

Goggles: VR02 Goggles

Motor: 716-19000KV Brushed motor

Propeller: 31mm 4-blade 0.8mm shaft hole

Takeoff weight: 35g(with battery)
Power system: 1S
Battery: BT2.0 300mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (in wide &amp undisturbed environment)

 
Altitude Hold Function
The altitude hold function enables the Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner.
The altitude hold function is only available in N mode.
Self-protection Function
The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once it has a strong collision with the object. Since then, let's say goodbye to loss and crash!

3 Flight Modes, One Key Switch
Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, Cetus FPV Kit lets anyone fly confidently from day one. 3 flight modes can be switched by one SB switch on transmitter, simple and convenient. Meanwhile, these 3 modes all support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter.

Self-developed LiteSilver System
Cetus brushed quadcopter equipped with lite 1S pro FC. which using LiteSilver system and integrated Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor. LiteSilver is a self-developed flight control system based on Silverware and FreeRTOS real-time operating system. It supports customers to adjust parameters as they prefer in the host computers (not yet open to customers).

Literadio2 SE Transmitter
It is designed for FPV racing starters, the LiteRadio 2 SE transmitter comes with a built-in 1000mah 1S battery, having an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. With the hobby-grade gimbal and adopted the rubber coat, it is more ergonomic.

VR02 FPV Goggles
VR02 FPV Goggles- the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.

Cetus Pro Brushless Quadcopter
Cetus Pro Brushless Quadcopter has been released! Pilots who have Cetus FPV Kit or LiteRadio2 SE Transmitter can consider upgrading to the Cetus Pro quad and enjoy a more exclusive FPV racing experience. The Cetus Pro quad has great features like turtle mode and a more powerful brushless system.

FAQ
1. What is the maximum Flight distance of the Cetus FPV kit?
With 25mW VTX, the quadcopter can fly 80m in a wide &amp undisturbed environment.2. Do you recommend flying this RTF kit indoors or outdoors?
We highly recommend pilot fly this kit indoors. For more info and instructions please check the User Manual for the Cetus FPV kit 


BetaFPV's Ready-To-Fly Cetus FPV Kit is the perfect starter kit! Kit Includes 1 * Cetus Brushed Quadcopter 1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol) 1 * VR02 FPV Goggles 2 * BT2.0 300mAh 1S Lipo Battery 1 * BT2.0 Battery Charger and Voltage Tester 1 * USB Charging Cable (Type-C) 1 * Type-C Adapter 1 * Prop Removal Tool 4 * 31mm 4-Blade Props 2 * User Manual 1 * Portable Storage Bag Bullet Points Auxiliary flight function is suitable for beginners, greatly reducing the threshold of operating. Now everyone can fly! Including N-Mode, S-Mode, M-Mode, which can satisfy different needs of pilots and adapt to various flight environments. Cetus brushed quadcopter, LiteRadio2 SE transmitter, VR02 FPV Goggles, batteries, charger, etc., everything needed for flight is included. Equipped with Type-C port charging cable, unified charging port for all parts, more convenient for charging. All items are stored in an EVA portable storage bag, which provides better protection and is easy to carry. Specification Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1S Pro brushed FC VTX: 25mW Camera tilt degree: 25° Camera: C02 FPV Micro Camera Transmitter: Literaio2 SE Transmitter TX mode: Mode 2 (Left stick throttle) Goggles: VR02 Goggles Motor: 716-19000KV Brushed motor Propeller: 31mm 4-blade 0.8mm shaft hole Takeoff weight: 35g(with battery) Power system: 1S Battery: BT2.0 300mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (in wide & undisturbed environment) Altitude Hold Function The altitude hold function enables the Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner. The altitude hold function is only available in N mode. Self-protection Function The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once it has a strong collision with the object. Since then, let's say goodbye to loss and crash! 3 Flight Modes, One Key Switch Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, Cetus FPV Kit lets anyone fly confidently from day one. 3 flight modes can be switched by one SB switch on transmitter, simple and convenient. Meanwhile, these 3 modes all support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter. cetus fpv kit N/S/M mode Self-developed LiteSilver System Cetus brushed quadcopter equipped with lite 1S pro FC. which using LiteSilver system and integrated Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor. LiteSilver is a self-developed flight control system based on Silverware and FreeRTOS real-time operating system. It supports customers to adjust parameters as they prefer in the host computers (not yet open to customers). cetus fpv kit for beginners Literadio2 SE Transmitter It is designed for FPV racing starters, the LiteRadio 2 SE transmitter comes with a built-in 1000mah 1S battery, having an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. With the hobby-grade gimbal and adopted the rubber coat, it is more ergonomic. literadio2 transmitter VR02 FPV Goggles VR02 FPV Goggles- the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly. VR02 goggle Cetus Pro Brushless Quadcopter Cetus Pro Brushless Quadcopter has been released! Pilots who have Cetus FPV Kit or LiteRadio2 SE Transmitter can consider upgrading to the Cetus Pro quad and enjoy a more exclusive FPV racing experience. The Cetus Pro quad has great features like turtle mode and a more powerful brushless system. Cetus family FAQ 1. What is the maximum Flight distance of the Cetus FPV kit? With 25mW VTX, the quadcopter can fly 80m in a wide & undisturbed environment. 2. Do you recommend flying this RTF kit indoors or outdoors? We highly recommend pilot fly this kit indoors. For more info and instructions please check the User Manual for the Cetus FPV kit

Cetus FPV Flight Kit

BetaFPV's Ready-To-Fly Cetus FPV Kit is the perfect starter kit! Kit Includes 1 * Cetus Brushed Quadcopter                              1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1 * VR02 FPV Goggles    2 * BT2.0 300mAh 1S Lipo Battery      1 * BT2.0 Battery Charger and Voltage Tester 1 * USB Charging Cable (Type-C) 1 * Type-C Adapter 1 * Prop Removal Tool 4 * 31mm 4-Blade Props 2 * User Manual 1 * Portable Storage Bag Bullet Points Auxiliary flight function is suitable for beginners, greatly reducing the threshold of operating. Now everyone can fly! Including N-Mode, S-Mode, M-Mode, which can satisfy different needs of pilots and adapt to various flight environments. Cetus brushed quadcopter, LiteRadio2 SE transmitter, VR02 FPV Goggles, batteries, charger, etc., everything needed for flight is included.  Equipped with Type-C port charging cable, unified charging port for all parts, more convenient for charging. All items are stored in an EVA portable storage bag, which provides better protection and is easy to

The highly anticipated Cetus FPV Kit comes! It will be the best choice for FPV beginners to explore the FPV world and bring your family and friends into this hobby. With Cetus brushed quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, everything you need is in a pack! Check out all our Analog BNF/PNP/RTF Kits

BetaFPV Cetus FPV RTF Kit W/Goggles & Controller

The highly anticipated Cetus FPV Kit comes! It will be the best choice for FPV beginners to explore the FPV world and bring their family and friends into this hobby. Cetus brushed quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, everything you need is in a pack!

Bullet Points

Auxiliary flight function is suitable for beginners, greatly reducing the threshold of operating. Now everyone can fly!
Including N-Mode, S-Mode, M-Mode, which can satisfy different needs of pilots and adapt to various flight environments.

Cetus brushed quadcopter, LiteRadio2 SE transmitter, VR02 FPV Goggles, batteries, charger, etc., everything needed for flight is included. 
Equipped with Type-C port charging cable, unified charging port for all parts, more convenient for charging.
All items are stored in an EVA portable storage bag, which provides better protection and is easy to carry.

Altitude Hold Function
The altitude hold function enables the Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner.
The altitude hold function is only available in N mode.
Self-protection Function
The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once it has a strong collision with the object.  Since then, let's say goodbye to loss and crash!

3 Flight Modes, One Key Switch
Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, Cetus FPV Kit lets anyone fly confidently from day one. 3 flight modes can be switched by one SB switch on transmitter, simple and convenient. Meanwhile, these 3 modes all support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter.

Self-developed LiteSilver System
Cetus brushed quadcopter equipped with lite 1S pro FC. which using LiteSilver system and integrated Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor. LiteSilver is a self-developed flight control system based on Silverware and FreeRTOS real-time operating system. It supports customers to adjust parameters as they prefer in the host computers (not yet open to customers).

Literadio2 SE Transmitter
It is designed for FPV racing starters, the LiteRadio 2 SE transmitter comes with a built-in 1000mah 1S battery, having an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. With the hobby-grade gimbal and adopted the rubber coat, it is more ergonomic.

VR02 FPV Goggles
VR02 FPV Goggles - the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.

Specification


Positioning system: Optical flow / Barometer / Laser


Height Positioning: Laser / Barometer

Angle Locating: Optical flow ( effective height 0.3-3m)

Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)

Receiver protocol: Frsky D8
Flight controller: Lite 1S Pro brushed FC
VTX: 25mW

Camera tilt degree: 25°

Camera: C02 FPV Micro Camera
Transmitter: Literaio2 SE Transmitter

TX mode: Mode 2 (Left stick throttle)

Goggles: VR02 Goggles

Motor: 716-19000KV Brushed motor

Propeller: 31mm 4-blade 0.8mm shaft hole

Takeoff weight: 35g(with battery)
Power system: 1S
Battery: BT2.0 300mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (in wide &amp undisturbed environment)

Cetus Pro Brushless Quadcopter
Cetus Pro Brushless Quadcopter has been released! Pilots who have Cetus FPV Kit or LiteRadio2 SE Transmitter can consider upgrading to the Cetus Pro quad and enjoy a more exclusive FPV racing experience. The Cetus Pro quad has great features like turtle mode and a more powerful brushless system.

FAQ

Top questions that customers frequently asked about Cetus.
For more info and instructions please check the User Manual for the Cetus FPV kit 


Package

1 * Cetus Brushed Quadcopter                             
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)                        
1 * VR02 FPV Goggles   
2 * BT2.0 300mAh 1S Lipo Battery     
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 31mm 4-Blade Props
2 * User Manual
1 * Portable Storage Bag
1 * Phillips Screwdriver



Recommended by 5000+ experts and reviews, one of the most popular fpv kits for beginners.Best price and stable quality for fpv drone. These are the RTF Whoop FPV racing kits FPV drone for beginners or training. It will be the best choice for FPV beginners to explore the FPV world

Cetus FPV Kit

The BETAFPV Cetus FPV Kit has everything you need to begin your flying experience!&nbspThe highly anticipated Cetus FPV Kit is the best choice for FPV beginners to explore the FPV world and bring your family and friends into this hobby. The Cetus FPV Racing comes with the Cetus brushed whoop quadcopter,&nbspLiteRadio2 SE transmitter, and&nbspVR02 FPV Goggles, which is everything you need to get up in the air!

The BETAFPV Cetus FPV Kit has everything you need to begin your flying experience! The highly anticipated Cetus FPV Kit is the best choice for FPV beginners to explore the FPV world and bring your family and friends into this hobby. The Cetus FP

BETAFPV RTF Cetus Beginner FPV Kit - Brushed Version

iFlight BNF Alpha A75 Analog Whoop

You've seen the A65 and the A85. Well, it would make sense for iFlight to release the A75 to fill the gap in size!