FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

EMAX

EMAX RTF EZ Pilot Pro Kit - Goggles, Radio Transmitter, 75mm Whoop

Consistent improvement is the goal of our team at EMAX but this comes at a cost. With more upgrades to our micro indoor racing drones which cater to more experienced pilots, we further alienate potential budding pilots looking to explore the world of FPV. This is why our engineers have come up with a solution through t

EMAX EZ Pilot Pro Indoor Racing Drone - RTF

Emax USA

 

 
 
 
Drone Specs:

Wheelbase: 75mm
Dry weight: 32.5g
AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter
Motor: 08025 II KV15000
RX Protocol: FrSky D8 SPI

Includes:

1x EZ Pilot Pro Drone
1x E8 Transmitter
1x Transporter 2 Non-DVR Version
1x Monitor Mounting Hardware
1x EMAX 1S 450 mAh LiPo battery
1x 6-Port 1S USB LiPo Battery Charger
1x USB Cable for Charging + Programming
1x Set Spare Turtlemode Propellers
1x Set Spare Hardware

        Drone Specs: Wheelbase: 75mm Dry weight: 32.5g AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter Motor: 08025 II KV15000 RX Protocol: FrSky D8 SPI Includes: 1x EZ Pilot Pro Drone 1x E8 Transmitter 1x Transporter 2 Non-DVR Version 1x Monitor Mounting Hardware 1x EMAX 1S 450 mAh LiPo batt

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles from WREKD Co.

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles

The EZ Pilot Pro drone features an improved frame, 200mw VTX capabilities, and a solid pin PH2.0 connector over the original.

EMAX EZ Pilot Pro Beginner FPV Drone RTF Kit w/ Transporter 2 Goggles + E8 Transmitter

Pre-Built Quad Kit Type

Pre-Built Quads and Kits

Quad Frame Size

Quad Type

EMAX RTF TinyHawk III Ready to Fly Kit w/ Goggles, Radio Transmitter, Case and 76mm Racing Whoop Drone

Self-improvement is a core trait for the engineers at EMAX, which is why when approached about a new successor to the Tinyhawk series, they designed the Tinyhawk III to build upon all the strengths of previous generations while improving any shortcomings. First is a drastically redesigned body frame centered around dur

Emax Tinyhawk 3 FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

      Size class: 76mm Weight (without battery): 32 grams Motors: TH0802 II 15000kv Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC Receiver:  SPI / FrSky D8/D16 Camera: RunCam Nano 4 Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.    

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggles

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggl - RMRC

Introducing... the&nbspEMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

Introducing... the EMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

EMAX TinyHawk III FPV Racing Drone RTF Bundle

 

 
 
Size class: 76mm
Weight (without battery): 32 grams
Motors: TH0802 II 15000kv
Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC
Receiver:  SPI / FrSky D8/D16
Camera: RunCam Nano 4
Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.
 
 

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles from WREKD Co.

BetaFPV

BetaFPV RTF Cetus Pro FPV Kit - Cetus Pro Whoop, Goggles, Transmitter, Batteries, Charger & Case

BETAFPV

The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, it's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor.

Bullet Point

The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV. 
Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train.
With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight. 
Made of PA12 material, the frame has an excellent impact resistance in drop &amp impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors.
All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry. 




Altitude Hold, Easy to Fly
The altitude hold function enables Auto-Hover. This quadcopter can stay at a current height when pilots' hands are off the transmitter. Barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner! 
The altitude hold function is only available in N mode.

Self-protection, No More Dangers
The quadcopter comes with an excellent self-protection function. It can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once there is a strong collision with the object. Let's say goodbye to loss and crash!

Turtle Mode, No Burden to Fly Away
When the quadcopter falls to the ground and upside down, we can active turtle mode by LiteRadio2 SE transmitter to flip it over and resume flying. With this function, there is no need to walk away to correct the position manually.
Turtle mode will not work effectively if something gets stuck in the motor/prop. Please push down switch SD on the transmitter immediately in this situation to exit turtle mode. 

3 Flight Modes, From Zero to Hero
Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus Pro FPV Kit helps anyone fly confidently from day one. These 3 flight modes can be switched by one SB switch on transmitter, which is simple and convenient. Meanwhile, all modes support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter.

Cetus Pro Brushless Quadcopter
Equipped Lite 1-2S Pro brushless flight controller with 12A ESC, matching with 1102 18000KV brushless motors and 40mm 3-blade props, which is absolutely more powerful and maneuverable. Turtle mode greatly makes FPV racing training smooth and convenient.

FPV Simulator Supported
LiteRadio2 SE radio transmitter can be used as a USB Joystick when connected to the computer. So it's available to play FPV simulators like EREADRONE, LIFTOFF. More convenient for practicing and charging at the same time. Besides, the transmitter is more ergonomic with a hobby-grade gimbal and adopted the rubber coat.

New to FPV? No worries. Our new Cetus Pro FPV Kit will take you from zero to hero in no time.This is a very different drone from BETAFPV. It's a brushless whoop drone designed from the ground up for FPV beginners. With three modes, you can start your FPV journey at a stable, basic level – and then progress. If you’ve ever felt that FPV is too difficult to tackle, this is the solution for you.
Click here to know more about LIFTOFF.
Download LIFTOFF.

VR02 FPV Goggles
VR02 FPV Goggles- the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, it fits your face and head perfectly.

Specification

Positioning system: Optical flow/ Barometer/ Laser
Height positioning: Laser/ Barometer
Position locating: Optical flow (effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Quad: Cetus Pro Brushless Quadcopter

Frame: Cetus Pro Brushless Whoop Frame

Flight controller: Lite 1-2S Pro brushless FC
VTX: 25mW
Camera tilt degree: 30°
Camera: C02 FPV Micro Camera

Transmitter: Literadio2 SE Transmitter

TX mode: Mode 1 &amp Mode 2 optional
Goggles: VR02 Goggles

Motor: 1102-18000KV Brushless motor

Propeller: 40mm 3-blade 1.5mm shaft hole
Takeoff weight: 33.19g (without battery)
Power system: 1S
Battery: BT2.0 450mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (in wide &amp undisturbed environment)

FAQ


Top questions that customers frequently asked about Cetus Pro.

For more info and instructions, please check the User Manual for Cetus Pro FPV Kit 

Recommend the newest BT2.0 550mAh 1S Battery. More flight time and higher discharge rate.

Note: Pilots should remove the battery plate if installing the 550mAh battery on Cetus Pro.
Package

1 * Cetus Pro Brushless Quadcopter  
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol) 
1 * VR02 FPV Goggles   
2 * BT2.0 450mAh 1S Lipo Battery     
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 *  40mm 3-blade Props

2 * User Manual
1 * Portable Storage Bag
1 * Phillips Screwdriver

Note: The propellers in the package were modified from three holes to one hole.


Recommended by 5000+ experts and reviews, one of the most popular fpv kits for beginners.Best price and stable quality for fpv drone. The Cetus Pro FPV Kit FPV drone is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles

Cetus Pro FPV Kit

The BETAFPV Cetus Pro FPV Kit is&nbspfinally&nbsphere! It is the best ideal choice for beginners to advance currently. The Cetus Pro FPV Racing Kit comes with the Cetus brushed whoop quadcopter,&nbspLiteRadio2 SE transmitter, and&nbspVR02 FPV Goggles.

The BETAFPV Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. The Cetus Pro FPV Racing Kit comes with the Cetus brushed whoop quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Gog

BETAFPV Cetus Pro FPV Brushless Whoop Racing Kit

The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, it's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor. Check out all our 

BetaFPV Cetus PRO FPV RTF Kit W/Goggles & Controller

BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case

BetaFPV's Ready-To-Fly Cetus FPV Kit is the perfect starter kit!
Kit Includes

1 * Cetus Brushed Quadcopter                             
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)                        
1 * VR02 FPV Goggles   
2 * BT2.0 300mAh 1S Lipo Battery     
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 31mm 4-Blade Props
2 * User Manual
1 * Portable Storage Bag

Bullet Points

Auxiliary flight function is suitable for beginners, greatly reducing the threshold of operating. Now everyone can fly!
Including N-Mode, S-Mode, M-Mode, which can satisfy different needs of pilots and adapt to various flight environments.

Cetus brushed quadcopter, LiteRadio2 SE transmitter, VR02 FPV Goggles, batteries, charger, etc., everything needed for flight is included. 
Equipped with Type-C port charging cable, unified charging port for all parts, more convenient for charging.
All items are stored in an EVA portable storage bag, which provides better protection and is easy to carry.


Specification


Positioning system: Optical flow / Barometer / Laser


Height Positioning: Laser / Barometer

Angle Locating: Optical flow ( effective height 0.3-3m)

Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)

Receiver protocol: Frsky D8
Flight controller: Lite 1S Pro brushed FC
VTX: 25mW

Camera tilt degree: 25°

Camera: C02 FPV Micro Camera
Transmitter: Literaio2 SE Transmitter

TX mode: Mode 2 (Left stick throttle)

Goggles: VR02 Goggles

Motor: 716-19000KV Brushed motor

Propeller: 31mm 4-blade 0.8mm shaft hole

Takeoff weight: 35g(with battery)
Power system: 1S
Battery: BT2.0 300mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (in wide &amp undisturbed environment)

 
Altitude Hold Function
The altitude hold function enables the Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner.
The altitude hold function is only available in N mode.
Self-protection Function
The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once it has a strong collision with the object. Since then, let's say goodbye to loss and crash!

3 Flight Modes, One Key Switch
Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, Cetus FPV Kit lets anyone fly confidently from day one. 3 flight modes can be switched by one SB switch on transmitter, simple and convenient. Meanwhile, these 3 modes all support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter.

Self-developed LiteSilver System
Cetus brushed quadcopter equipped with lite 1S pro FC. which using LiteSilver system and integrated Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor. LiteSilver is a self-developed flight control system based on Silverware and FreeRTOS real-time operating system. It supports customers to adjust parameters as they prefer in the host computers (not yet open to customers).

Literadio2 SE Transmitter
It is designed for FPV racing starters, the LiteRadio 2 SE transmitter comes with a built-in 1000mah 1S battery, having an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. With the hobby-grade gimbal and adopted the rubber coat, it is more ergonomic.

VR02 FPV Goggles
VR02 FPV Goggles- the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.

Cetus Pro Brushless Quadcopter
Cetus Pro Brushless Quadcopter has been released! Pilots who have Cetus FPV Kit or LiteRadio2 SE Transmitter can consider upgrading to the Cetus Pro quad and enjoy a more exclusive FPV racing experience. The Cetus Pro quad has great features like turtle mode and a more powerful brushless system.

FAQ
1. What is the maximum Flight distance of the Cetus FPV kit?
With 25mW VTX, the quadcopter can fly 80m in a wide &amp undisturbed environment.2. Do you recommend flying this RTF kit indoors or outdoors?
We highly recommend pilot fly this kit indoors. For more info and instructions please check the User Manual for the Cetus FPV kit 


BetaFPV's Ready-To-Fly Cetus FPV Kit is the perfect starter kit! Kit Includes 1 * Cetus Brushed Quadcopter 1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol) 1 * VR02 FPV Goggles 2 * BT2.0 300mAh 1S Lipo Battery 1 * BT2.0 Battery Charger and Voltage Tester 1 * USB Charging Cable (Type-C) 1 * Type-C Adapter 1 * Prop Removal Tool 4 * 31mm 4-Blade Props 2 * User Manual 1 * Portable Storage Bag Bullet Points Auxiliary flight function is suitable for beginners, greatly reducing the threshold of operating. Now everyone can fly! Including N-Mode, S-Mode, M-Mode, which can satisfy different needs of pilots and adapt to various flight environments. Cetus brushed quadcopter, LiteRadio2 SE transmitter, VR02 FPV Goggles, batteries, charger, etc., everything needed for flight is included. Equipped with Type-C port charging cable, unified charging port for all parts, more convenient for charging. All items are stored in an EVA portable storage bag, which provides better protection and is easy to carry. Specification Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1S Pro brushed FC VTX: 25mW Camera tilt degree: 25° Camera: C02 FPV Micro Camera Transmitter: Literaio2 SE Transmitter TX mode: Mode 2 (Left stick throttle) Goggles: VR02 Goggles Motor: 716-19000KV Brushed motor Propeller: 31mm 4-blade 0.8mm shaft hole Takeoff weight: 35g(with battery) Power system: 1S Battery: BT2.0 300mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (in wide & undisturbed environment) Altitude Hold Function The altitude hold function enables the Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner. The altitude hold function is only available in N mode. Self-protection Function The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once it has a strong collision with the object. Since then, let's say goodbye to loss and crash! 3 Flight Modes, One Key Switch Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, Cetus FPV Kit lets anyone fly confidently from day one. 3 flight modes can be switched by one SB switch on transmitter, simple and convenient. Meanwhile, these 3 modes all support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter. cetus fpv kit N/S/M mode Self-developed LiteSilver System Cetus brushed quadcopter equipped with lite 1S pro FC. which using LiteSilver system and integrated Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor. LiteSilver is a self-developed flight control system based on Silverware and FreeRTOS real-time operating system. It supports customers to adjust parameters as they prefer in the host computers (not yet open to customers). cetus fpv kit for beginners Literadio2 SE Transmitter It is designed for FPV racing starters, the LiteRadio 2 SE transmitter comes with a built-in 1000mah 1S battery, having an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. With the hobby-grade gimbal and adopted the rubber coat, it is more ergonomic. literadio2 transmitter VR02 FPV Goggles VR02 FPV Goggles- the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly. VR02 goggle Cetus Pro Brushless Quadcopter Cetus Pro Brushless Quadcopter has been released! Pilots who have Cetus FPV Kit or LiteRadio2 SE Transmitter can consider upgrading to the Cetus Pro quad and enjoy a more exclusive FPV racing experience. The Cetus Pro quad has great features like turtle mode and a more powerful brushless system. Cetus family FAQ 1. What is the maximum Flight distance of the Cetus FPV kit? With 25mW VTX, the quadcopter can fly 80m in a wide & undisturbed environment. 2. Do you recommend flying this RTF kit indoors or outdoors? We highly recommend pilot fly this kit indoors. For more info and instructions please check the User Manual for the Cetus FPV kit

Cetus FPV Flight Kit

BetaFPV's Ready-To-Fly Cetus FPV Kit is the perfect starter kit! Kit Includes 1 * Cetus Brushed Quadcopter                              1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1 * VR02 FPV Goggles    2 * BT2.0 300mAh 1S Lipo Battery      1 * BT2.0 Battery Charger and Voltage Tester 1 * USB Charging Cable (Type-C) 1 * Type-C Adapter 1 * Prop Removal Tool 4 * 31mm 4-Blade Props 2 * User Manual 1 * Portable Storage Bag Bullet Points Auxiliary flight function is suitable for beginners, greatly reducing the threshold of operating. Now everyone can fly! Including N-Mode, S-Mode, M-Mode, which can satisfy different needs of pilots and adapt to various flight environments. Cetus brushed quadcopter, LiteRadio2 SE transmitter, VR02 FPV Goggles, batteries, charger, etc., everything needed for flight is included.  Equipped with Type-C port charging cable, unified charging port for all parts, more convenient for charging. All items are stored in an EVA portable storage bag, which provides better protection and is easy to

The highly anticipated Cetus FPV Kit comes! It will be the best choice for FPV beginners to explore the FPV world and bring their family and friends into this hobby. Cetus brushed quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, everything you need is in a pack!

Bullet Points

Auxiliary flight function is suitable for beginners, greatly reducing the threshold of operating. Now everyone can fly!
Including N-Mode, S-Mode, M-Mode, which can satisfy different needs of pilots and adapt to various flight environments.

Cetus brushed quadcopter, LiteRadio2 SE transmitter, VR02 FPV Goggles, batteries, charger, etc., everything needed for flight is included. 
Equipped with Type-C port charging cable, unified charging port for all parts, more convenient for charging.
All items are stored in an EVA portable storage bag, which provides better protection and is easy to carry.

Altitude Hold Function
The altitude hold function enables the Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner.
The altitude hold function is only available in N mode.
Self-protection Function
The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once it has a strong collision with the object.  Since then, let's say goodbye to loss and crash!

3 Flight Modes, One Key Switch
Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, Cetus FPV Kit lets anyone fly confidently from day one. 3 flight modes can be switched by one SB switch on transmitter, simple and convenient. Meanwhile, these 3 modes all support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter.

Self-developed LiteSilver System
Cetus brushed quadcopter equipped with lite 1S pro FC. which using LiteSilver system and integrated Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor. LiteSilver is a self-developed flight control system based on Silverware and FreeRTOS real-time operating system. It supports customers to adjust parameters as they prefer in the host computers (not yet open to customers).

Literadio2 SE Transmitter
It is designed for FPV racing starters, the LiteRadio 2 SE transmitter comes with a built-in 1000mah 1S battery, having an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. With the hobby-grade gimbal and adopted the rubber coat, it is more ergonomic.

VR02 FPV Goggles
VR02 FPV Goggles - the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.

Specification


Positioning system: Optical flow / Barometer / Laser


Height Positioning: Laser / Barometer

Angle Locating: Optical flow ( effective height 0.3-3m)

Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)

Receiver protocol: Frsky D8
Flight controller: Lite 1S Pro brushed FC
VTX: 25mW

Camera tilt degree: 25°

Camera: C02 FPV Micro Camera
Transmitter: Literaio2 SE Transmitter

TX mode: Mode 2 (Left stick throttle)

Goggles: VR02 Goggles

Motor: 716-19000KV Brushed motor

Propeller: 31mm 4-blade 0.8mm shaft hole

Takeoff weight: 35g(with battery)
Power system: 1S
Battery: BT2.0 300mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (in wide &amp undisturbed environment)

Cetus Pro Brushless Quadcopter
Cetus Pro Brushless Quadcopter has been released! Pilots who have Cetus FPV Kit or LiteRadio2 SE Transmitter can consider upgrading to the Cetus Pro quad and enjoy a more exclusive FPV racing experience. The Cetus Pro quad has great features like turtle mode and a more powerful brushless system.

FAQ

Top questions that customers frequently asked about Cetus.
For more info and instructions please check the User Manual for the Cetus FPV kit 


Package

1 * Cetus Brushed Quadcopter                             
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)                        
1 * VR02 FPV Goggles   
2 * BT2.0 300mAh 1S Lipo Battery     
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 31mm 4-Blade Props
2 * User Manual
1 * Portable Storage Bag
1 * Phillips Screwdriver



Recommended by 5000+ experts and reviews, one of the most popular fpv kits for beginners.Best price and stable quality for fpv drone. These are the RTF Whoop FPV racing kits FPV drone for beginners or training. It will be the best choice for FPV beginners to explore the FPV world

Cetus FPV Kit

The highly anticipated Cetus FPV Kit comes! It will be the best choice for FPV beginners to explore the FPV world and bring your family and friends into this hobby. With Cetus brushed quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, everything you need is in a pack! Check out all our Analog BNF/PNP/RTF Kits

BetaFPV Cetus FPV RTF Kit W/Goggles & Controller

The BETAFPV Cetus FPV Kit has everything you need to begin your flying experience!&nbspThe highly anticipated Cetus FPV Kit is the best choice for FPV beginners to explore the FPV world and bring your family and friends into this hobby. The Cetus FPV Racing comes with the Cetus brushed whoop quadcopter,&nbspLiteRadio2 SE transmitter, and&nbspVR02 FPV Goggles, which is everything you need to get up in the air!

The BETAFPV Cetus FPV Kit has everything you need to begin your flying experience! The highly anticipated Cetus FPV Kit is the best choice for FPV beginners to explore the FPV world and bring your family and friends into this hobby. The Cetus FP

BETAFPV RTF Cetus Beginner FPV Kit - Brushed Version

GEPRC

GEPRC RTF TinyGO 4K FPV Whoop Kit

GEPRC is happy with their new release of the TinyGO, which comes in a ready-to-fly whoop kit! GEPRC has worked so hard to create a lightweight whoop that is suitable for indoor flying, has max performance, and with their 4K version, one can record video up to 4K 60fps.

GEPRC is happy with their new release of the TinyGO, which comes in a ready-to-fly whoop kit! GEPRC has worked so hard to create a lightweight whoop that is suitable for indoor flying, has max performance, and with their 4K version, one can record vi

GEPRC TinyGO 4K FPV Whoop RTF Kit (Mode 2)

Large Volume and Including 4 PCS 1S Batteries. Please don't select Standard Shipping way.

GEPRC TinyGO 4K FPV Whoop RTF - GEPRC

GEPRC TinyGO 4K FPV Whoop RTF

GEPRC RTF TinyGO Racing FPV Whoop Kit

GEPRC TinyGO Racing FPV Whoop RTF - GEPRC

GEPRC TinyGO Racing FPV Whoop RTF

GEPRC is happy with their new release of the TinyGO, which comes in a ready-to-fly whoop kit! GEPRC has worked so hard to create a lightweight whoop that is suitable for indoor flying, has max performance, and is a great racing whoop drone!

GEPRC TinyGO Racing FPV Whoop RTF Kit (Mode 2)

GEPRC RTF TinyGO LED FPV Whoop Kit

Pre-Orders shipping ASAP! All products containing batteries must be shipped by a ground shipping method.
The GEPRC TinyGo LED version is a full-color RGB series whoop, specially designed and modified to celebrate the coming festival. Compare with the TinyGo Racing Version,  the TinyGo LED version replaces the EVO anti-collision sponge with LED straps. The total weight without batteries is under 55 grams. It lasts for 4-5 minutes in LED mode and 5-6 minutes in normal mode. There are 52 high-brightness small LED lamps in the whole Quadcopter. The LEDs can be programmed through Betaflight. You can customize the colors and styles as you wish. When flying at night, you can enjoy the pleasure of a colorful flight. It should be noted that the LED lamp won’t be waterproof, so please avoid flying in a wet environment. 
The TinyGO LED is an RTF Kit for Indoor Flights. The Kit contains high-definition 800x480px FPV Goggles and the latest TinyRadio GR8 Remote Controller. It supports 8 channels and is designed for indoor flights and novices. The transmitter has a good feeling of control and It is lightweight and easy to carry. The good point is that you don’t need to carry heavy equipment. With our customized GEPRC Fly Bag. it’s very convenient to go to the field, travel, and on Indoor flights.
The TinyGO LED can use its own charger to charge. The charger uses the Type-C interface. You can use the movable power bank to charge as well. 
The TinyGO LED can be flown for more than 4 minutes (Depending on flight habits). Its stable electronic equipment and extremely strong and tough frame material make the FPV very stable and durable for crashes. There is an EVA protection foam around the frame,  more elastic and hard to damage.
TinyGO LED is carefully assembled by the GEPRC team, with excellent performance. You can start a whole new journey and enter into FPV World. TinyGO will be the best choice for your first FPV Drone.
This looks like the beginning of a terrific flight Experience. Literally!
Check out our other RTF combos, all our pre-built quads, and our GEPRC selection!
Note: If you buy a drone only, If you have a new TinyRadio GR8 remote controller, it can be directly bound, and the old version of the GEPRC GR8 remote controller should be bound by flashing the old version of the CLI
Changelog

January 12, 2022: TinyGo shipped today will have the new remote controller and the new charger version.
December 16, 2022: VTX changed from 5.8G 25~200mW VTX to RAD Whoop 5.8G 400mw VTX
December 16, 2022: The flight controller changed from GEP-12A-F4 to TAKER F411 8Bit 12A FC


Features

TinyGO LED is very suitable for indoor flights. More than 4 minutes of flight time
Using GEPRC-12A-F4 FC system is reliable and stable
No Propellers in view. Anti-jamming VTX. NO Jello flight Footage. Stable flight picture quality
The Newly Developed TinyRadio GR8 Remote Controller is specially designed for Novice and indoor flights
It has High-Quality FPV Goggles, with High definition 800x480px., and a sensitive 5.8G receiver
Ready To Fly Kit, Includes a GEPRC Fashion Fly bag. Portable and Lightweight.

Specifications

Name: TinyGO
Brand: GEPRC
Frame: GEP-TG16
Motor to Motor: 79mm
FC: TAKER F411 8Bit 12A
MCU: STM32F411
IMU: 42688-P
Blackbox: 16Mb
OSD: BetaFlight OSD w/ AT7456E chip
ESC: 8Bit 12A
VTX: RAD Whoop 5.8G 400mw VTX
Camera: Runcam Nano2/Caddx Loris 4K 60fps
Propeller: GEMFAN 1636x4 (4 pairs)
Motors: GR1102 10000Kv
TinyGO LED Weight (Without Batteries): 55 Grams

Remote Controller

TinyRadio GR8 Remote Controller
Radio Frequency: 2.4GHz
Radio Protocol: FHSS
Channel:8
Transmit Power: &amplt20 dBm
Antenna interface: SMA
Low Voltage alarm: &amplt6.6v
Batteries: two 18650 batteries or a 2S battery. (not included)

Receiver

Channel: 8
Voltage: 5V
Radio Frequency: 2.4GHz
Radio Protocol: FHSS
Range: 100 meter

FPV Goggle

Resolution: 800x480px
Size of Screen: 4.3 inch
Whole Size: 155x144x113mm
In-built batteries: 3.7v/2000mAh
Working Hours: 2.5 Hours
Weight: 314.6 Grams

FPV Batteries

Batteries Capacity: 530mAh
Voltage: 4.35v 1S1P
Discharge rate: 90C
Size: 61x16.7x7mm
Weight: 12.7 Grams
Interface: PH2.0

Charger

Input power: 5v (USB Type C）
Full charged Voltage: 4.35v
Output current: 1Ah
Charging: It can charge 2 PCS 1s HV lipo 4.35v HP2.0/GNB27 plug batteries at the same time

Includes

1x TinyGO LED Quadcopter
1x TinyRadio GR8 Transmitter
1x GEPRC FPV RG1 Goggle
1x GEPRC 1S LiHV 4.35v Charger
4x GEPRC LiHV 4.35v 90C Batteries
1x Battery strap



Pre-Orders shipping ASAP! All products containing batteries must be shipped by a ground shipping method. The GEPRC TinyGo LED version is a full-color RGB series whoop, specially designed and modified to celebrate the coming festival. Compare with the TinyGo Racing Version,  the TinyGo LED version replaces the EVO anti-

GEPRC RTF TinyGo LED FPV Ready To Fly Analog Kit w/ Goggles, Radio Transmitter, Case & Drone from WREKD Co.

(PRE-ORDER) GEPRC RTF TinyGo LED FPV Ready To Fly Analog Kit w/ Goggles, Radio Transmitter, Case & Drone

GEPRC is happy with their new release of the TinyGO, which comes in a ready-to-fly whoop kit! GEPRC has worked so hard to create a lightweight whoop that is suitable for indoor flying, has max performance, and with their LED version, pilots can have the pleasure of flying at night.

GEPRC is happy with their new release of the TinyGO, which comes in a ready-to-fly whoop kit! GEPRC has worked so hard to create a lightweight whoop that is suitable for indoor flying, has max performance, and with their LED version, pilots can have 

GEPRC TinyGO LED FPV Whoop RTF Kit (Mode 2)

Large Volume and Including 4 PCS 1S Batteries.Please don't select Standard Shipping way.

GEPRC TinyGO LED FPV Whoop RTF - GEPRC

GEPRC TinyGO LED FPV Whoop RTF

EMAX RTF TinyHawk II  Ready to Fly Kit - Googles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

Our TinyHawk II Freestyle RTF Bundle is the best way to get into FPV! The quality products in this bundle have been handpicked and pre-bound together by our team to give you the best micro experience.

EMAX TinyHawk II Freestyle 2S Micro FPV RTF Bundle w/ BETAFPV LiteRadio 2 + EMAX Transporter Goggles

Tinyhawk II 2 Indoor FPV Racing Drone F4 5A 16000KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 1S-2S - RTF

Tinyhawk II RTF Kit - With Controller & Goggles

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners and pros alike.

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners

EMAX TinyHawk II Micro Brushless FPV Drone (RTF Bundle)

Great beginner RTF kit by EMAX! Comes with everything you need to rip! See our Tinyhawk II collection! Check out all our BNF-PNP-RTF quads and Emax collection!Recommended Batteries : 1S: GNB 1S 450MAH HIGH VOLTAGE 80C PH 2.0 GNB 1S 450MAH 80C PH 2.0. AULINE 450MAH HV 3.8V 1S LIPO 80C PH2.0 - 4PCS 2S: GNB 300MAH 2S 7.6V

EMAX TINYHAWK II RACING DRONE RTF WITH RUNCAM NANO2 RTF

EMAX RTF Tinyhawk II Freestyle Ready To Fly Kit - Googles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II Freestyle quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners and pros alike.

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II Freestyle quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying,

EMAX TinyHawk II Freestyle FPV Drone RTF Kit with Goggles and Controller

Check out the brand new RTF from Emax! Introducing the brand new RE-INVENTED Tinyhawk II Freestyle COMBO!Includes Controller &amp; Goggles!!! See all parts for Tinyhawk II Freestyle! See the rest of our EMAX collection!  Frame: Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material

Emax Tinyhawk II Freestyle RTF Kit - With Controller & Goggles

  * Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber * Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" * All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHe

Tinyhawk II Freestyle RTF Kit - With Controller & Goggles

EMAX RTF EZ Pilot Beginner Indoor Racing Quadcopter

EMAX EZ Pilot Beginner Indoor Racing Drone - RTF Check out all our Emax Products and the rest of our BNF/PNP/RTFs!         Features: - Real-time Hobby-grade First-Person-View (FPV) Video Transmission System - Gyroscopic Self-leveling with 3-modes from beginner to advanced - Smart Height Assist altitude control in begin

EMAX EZ Pilot Beginner Indoor Racing Drone - RTF

Just in time for the holidays, the EMAX EZ Pilot is the best way to start flying drones! The EZ Pilot has a built-in FPV camera that allows the user to fly first-person through the FPV goggles so you can feel like you are flying in the air! 

EMAX EZ Pilot - Beginner FPV Drone RTF Kit w/ FPV Goggles + Radio

 


 
     
 
 
Features:
- Real-time Hobby-grade First-Person-View (FPV) Video Transmission System
- Gyroscopic Self-leveling with 3-modes from beginner to advanced
- Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode.
- EZ One Stick Control that mixes yaw and roll into one stick for simple, intuitive flight feel
- On-board FPV camera to experience flight from inside the aircraft
- 4 Minute flight time with included 450mah 1S battery
- Ergonomic Radio Controller and Comfort Fit FPV Virtual Reality Goggle included
 
 
 
 
 
Includes:
- 1x EZ-Pilot Indoor Drone
- 1x EZ-Pilot Controller (Proprietary Protocol, see Compatibility)
- 1x Transporter 5.8G FPV Goggles with 1x linear antenna included + second SMA port for upgrade/expansion
- 1x Transporter USB-rechargable 18650 Battery Pack
- 1x 450mah 1S 4.35V HV LiPo Battery
- 1x USB-powered 1S Charger
- 2x CW 2x CCW EZ Pilot Replacement Props
- 1x Micro USB Cable
- 1x EZ-Pilot Decal Customization Kit
 
 
 RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE
UPC: 691036971855

        Features: - Real-time Hobby-grade First-Person-View (FPV) Video Transmission System - Gyroscopic Self-leveling with 3-modes from beginner to advanced - Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode. - EZ One Stick Control that mixes yaw and roll into o

EZ Pilot Beginner Indoor Racing Drone - With Controller & Goggle RTF from WREKD Co.

EZ Pilot Beginner Indoor Racing Drone - With Controller & Goggle RTF

EZ Pilot Beginner Indoor Racing Drone - RTF (PRE-ORDER)

DJI Avata 2 Fly More Combo RTF Kit

All products with batteries must be shipped by a ground shipping method.
Includes the DJI Avata 2 drone, Goggles 3, RC Motion 3, and more. This combo lets you quickly get started with Avata 2 and experience the joy of immersive flight.
Check out our other RTF combos, all our pre-built quads and all of our DJI products!
Features






All Thrills, No Frills

Immersive Flight Experience
Intuitive Motion Control
Tight Shots in Super-Wide 4K
Easy ACRO
Built-in Propeller Guard
Hassle-Free POV Content

Fully Experience Flight DJI Avata 2 delivers an adrenaline-pumping immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the new DJI Goggles 3 and DJI RC Motion 3.DJI Goggles 3Visionary BreakthroughDJI Goggles 3 now has Real View PiP (Picture-In-Picture). Observe your surroundings without removing the goggles, for more safety and immersion. The Micro-OLED high-definition display and ultra-low-latency transmission bring the world in to view.
DJI RC Motion 3Feel Every FlightEffortlessly perform difficult aerial acrobatics with DJI RC Motion 3. New pilots can now perform spectacular flips, drifts, and other captivating maneuvers.
Easy ACROSoar, dive, and roll for stunning aerial footage with a single push. Capturing epic FPV footage with DJI RC Motion 3 and Avata 2 is easier than ever.


One-Push Flip: 360° front/back flip, adding fresh twists to your footage.

One-Push Roll: Roll 360° left/right, turning any shot from meh to magic.


One-Push 180° Drift: High-speed lateral drifts to yaw spin 180° past objects and swiftly pull away, achieving dramatic visuals.

Tight Shots in Super-Wide 4K Create breathtaking visuals with Avata 2's 155° FOV and its ability to swiftly approach and pull away from subjects. New pilots can quickly master aerobatic shots and capture fast-moving dynamic low-altitude shots that other drones can't.

155° Ultra-Wide-Angle FOV of Avata 2
82° Standard View of Camera Drones

1/1.3-inch Image SensorThe upgraded 1/1.3-inch image sensor expands the captured dynamic range, handling low-light conditions more effectively to capture outstanding footage on every flight.

Effective Pixels: 12 MP
Offline Stabilization: Gyroflow

Immersion Reimagined4K/60fps HDR VideosUnleash your true aerial potential. The 4K/60fps HDR on Avata 2 captures all the awesome of high-speed flight. In the goggles, you can adjust the sharpness and noise reduction levels for more finely tuned videos.
RockSteadyEquipped with DJI's latest stabilization algorithm, Avata 2 captures smooth, steady footage even when flying at high speeds or in windy conditions.RockSteady On | RockSteady Off
HorizonSteadyHorizonSteady handles horizontal rotations up to 360°, ensuring the captured footage remains locked on the horizon even if the drone turns sharply or sways dramatically.HorizonSteady On | HorizonSteady Off
155° Ultra-Wide-Angle FOVAmplify your vision and increase the immersion of low-altitude, high-speed flights. Avata 2 offers ultra-wide-angle, wide-angle, and normal-angle FOV options giving you the ability to adjust to the scenario.Ultra-Wide-Angle | Wide-Angle | Normal
10-bit D-Log MCapture rich detail in highlights and shadows and enhance content post-production opportunities while further streamlining color-grading.Standard Mode | 10-bit D-Log M Mode
Got You CoveredComprehensive SafetyThe updated integrated propeller guard design of Avata 2 makes it lighter and more agile, enabling it to navigate freely in tight spaces. Releasing the accelerator on RC Motion 3 or pressing the lock button brings the drone to a halt, allowing you to handle unexpected situations calmly. In addition, the automatic Return to Home (RTH) function is initiated when the drone's battery is low or in case of signal loss, adding an extra layer of security.3D Preview | AR Preview
Advanced Positioning with New SensorsNew binocular fisheye sensors enable downward and backward visual positioning during low-altitude and indoor flights, enhancing flight stability and safety.
Turtle ModeAvata 2 can automatically flip itself back into takeoff position when upside down with Turtle mode enabled, so you can quickly get airborne again.
Excellence in EverythingFlight Time/Video TransmissionThe Sky's the Limit With Longer Flight. Avata 2 boasts a maximum flight time of 23 minutes and supports PD fast charging, so you can quickly recharge it and take to the skies again.The new DJI Avata 2 Two-Way Charging Hub features a power accumulation function, allowing the transfer of remaining power from multiple batteries to the one with the highest charge level, giving you an "extra battery" in critical moments.
O4 Video Transmission, Enhanced PerceptionDJI O4 video transmission's enhanced stability lets you fully immerse yourself in each flight and provides greater safety. Its two-transmitter, four-receiver, four-antenna design ensures strong anti-interference performance, and it boasts up to 13 km of maximum video transmission distance, a transmission latency as low as 24 ms, 1080p/100fps high-definition image quality, and a maximum transmission bitrate of 60Mbps.
Boundless Passion, Wireless SharingWatch the DJI Goggles 3 live feed from Avata 2 on your smart device's DJI Fly App. Connect up to 5 m away. Sharing the excitement of FPV just got easier, and learning how to fly is more accessible than ever.
Save More, Share MoreCapture and Edit SeamlesslyAvata 2 comes equipped with 46GB internal storage, capable of storing approximately 90 minutes of 1080p/60fps video, ensuring you capture the best parts of each flight.With Wi-Fi connectivity for fast file transfer to your phone, post-editing and sharing of your finished work is highly efficient.One-Tap VFX with LightCutThe LightCut app, connecting directly to DJI Avata 2 via Wi-Fi, allows you to intelligently add Sky VFX during post based on the flight trajectory captured in your videos, helping you easily create engaging aerial footage. Without the need to download the footage, the app offers editing and, combined with ‌One-Tap Edit, allows you to produce polished content in a snap effortlessly.


Sky VFX: After connecting the device and importing the footage, tap Sky VFX to add unique overlays, through-the-air text animations, virtual cockpits, and dashboard effects, enhancing the interactive fun and engagement of your immersive flight footage

One-Tap Edit: With AI's intelligent recognition of video types and themes, you can effortlessly filter through and select highlights with smooth camera work and exquisite composition. Coupled with a vast array of thematic templates, enabling you to produce polished content. The app also boasts intelligent sound effects, color restoration, one-click addition of device watermarks, and end credits, among other features

Wireless Connection: When Avata 2 is connected wirelessly to LightCut, you can preview the captured footage within the app and edit it without the need to download the footage, saving valuable space on your smartphone



Specifications
DJI Avata 2

Takeoff Weight: 377g Approx.
Dimensions: 185×212×64mm (L×W×H)
Max Ascent Speed: 6 m/s (Normal mode), 9 m/s (Sport mode)
Max Descent Speed: 6 m/s (Normal mode), 9 m/s (Sport mode)
Max Horizontal Speed (near sea level, no wind): 8 m/s (Normal mode), 16 m/s (Sport mode), 27 m/s (Manual mode)* No faster than 19 m/s with the Manual mode in the EU regions.

Max Takeoff Altitude: 5000m * Measured in a windless environment when taking off from an altitude of 5000 m and ascending vertically by 500 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.

Max Flight Time: Approx. 23 mins * Measured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Hovering Time: Approx. 21 mins * ‌‌Measured when hovering in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Flight Distance: 13.0 km * ‌Measured when flying forward at a speed of 43.2 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Wind Speed Resistance: 10.7 m/s (Level 5)
Operating Temperature: -10° to 40° C (14° to 104° F)
Global Navigation Satellite System: GPS + Galileo + BeiDou
Hovering accuracy range Vertical:

±0.1 m (with vision positioning)
±0.5 m (with GNSS positioning)

Horizontal:

±0.3 m (with vision positioning)
±1.5 m (with GNSS positioning)

Internal Storage: 46 GB


Camera

Image Sensor: 1/1.3-inch image sensor
Effective Pixels: 12 MP
Lens FOV: 155°
Format Equivalent: 12 mm
Aperture: f/2.8
Focus: 0.6 m to ∞
ISO Range: 100-25600 (Auto), 100-25600 (Manual)
Shutter Speed Video: 1/8000-1/30 s, Photo: 1/8000-1/50 s
Max Image Size: 4000×2256 (16∶9), 4000×3000 (4∶3)
Still Photography Mode: Single shot
Photo Format: JPEG
Video Resolution

-4K (4∶3): 3840×2880@30/50/60fps
-4K (16∶9): 3840×2160@30/50/60fps
-2.7K (4∶3): 2688×2016@30/50/60fps
-2.7K (16∶9): 2688×1512@30/50/120fps
-1080p (4∶3): 1440×1080@30/50/120fps
-1080p (16∶9): 1920×1080@30/50/120fps


Video Format: MP4 (H.264/H.265)
Max Video Bitrate: 130 Mbps
Supported File System: exFAT
Color Mode: Standard, D-Log M
Camera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.
Camera EIS: Supports RockSteady 3.0+ and HorizonSteady, * Can be disabled *When stabilization is turned off, footage captured with the wide-angle view supports offline stabilization Gyroflow.

Gimbal

Stabilization: Single-axis mechanical gimbal (tilt)
Mechanical RangeC85: Tilt: -95° to 90°
Controllable Range: Tilt: -85° to 80°
Max Control Speed (tilt): 100°/s
Angular Vibration Range: ±0.01°
Electronic Roll Axis: Real-time screen correction is unavailable during recording, but can be applied to the footage recorded on the drone.

Sensing

Sensing Type: Downward and backward visual positioning
Downward

-ToF Effective Measurement Height: 10 m-Precise Hovering Range: 0.3-10 m-Measurement Range: 0.3-20 m-FOV: Horizontal 78°, Vertical 78°

Sensing Backward

-Measurement Range: 0.5-20 m-FOV: Horizontal 78°, Vertical 78°

Sensing Operating Environment

-Diffuse reflective surfaces with discernible patterns, diffuse reflectivity &gt 20% (such as concrete pavement)-Adequate lighting (lux &gt 15, normal indoor lighting conditions)
Video Transmission

Video Transmission System: O4
Live View Quality: 1080p@30/50/60/100fps
Operating Frequency:

-2.400-2.4835 GHz-5.170-5.250 GHz*-5.725-5.850 GHz** 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.

Transmitter Power (EIRP):

-2.4 GHz＜33 dBm (FCC)＜20 dBm (CE/SRRC/MIC)-5.1 GHz&lt 23 dBm (CE)-5.8 GHz＜33 dBm (FCC)＜30 dBm (SRRC)&lt 14 dBm (CE)

Communication Bandwidth Max 60 MHz
Max Transmission Distance (unobstructed, free of interference)

-FCC: 13 km (subject to the aircraft's max flight distance)-CE: 10 km-SRRC: 10 km-MIC: 10 km* Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.

Max Transmission Distance (unobstructed, with interference)

-Strong Interference: Urban landscape, approx. 1.5-4 km-Medium Interference: Suburban landscape, approx. 4-10 km-Low Interference: Suburb/seaside, approx. 10-13 km* Data tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

Max Transmission Distance (obstructed, with interference)

-Low Interference and Obstructed by Buildings: approx. 0-0.5 km-Low Interference and Obstructed by Trees: approx. 0.5-3 km* Data tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

Max Download Speed: Wi-Fi: 30 MB/s

* Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.

Lowest Latency With DJI Goggles 3:

-1080p/100fps Video Transmission Quality: 24 ms-1080p/60fps Video Transmission Quality: 40 ms

Max Video Bitrate: 60Mbps
Antennas: 4 antennas, 2T4R

Wi-Fi

ProtocolC156: 802.11a/b/g/n/ac
Operating Frequency: 2.400-2.4835 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP):

-2.4 GHz&lt20 dBm (FCC／CE／SRRC／MIC)-5.8 GHz&lt20 dBm (FCC／SRRC)&lt 14 dBm (CE)
Bluetooth

Protocol: Bluetooth 5.0
Operating Frequency: 2.400-2.4835 GHz
Transmitter Power (EIRP): &lt10 dBm

Intelligent Flight Battery

Capacity: 2150 mAh
Weight: 145g Approx.
Standard Voltage: 14.76 V
Max Charging Voltage: 17 V
Battery Type: Li-ion
Energy: 31.7 Wh@0.5C
Charging Temperature: 5° to 40° C (41° to 104° F)
Charging Time:

-With Charging Hub (60W max charging power)From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 min-Directly Charging the Drone (30 W max charging power)From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min
Charger

Recommended Charger: DJI 65W Portable Charger, DJI 65W Car Charger, USB Power Delivery charger

Battery Charging Hub

Input: 5-20 V, max 3 A
Output (power accumulation): Max 65 W
Output (charging): Max 17 V
Output (USB): 5 V, 2 A
Charging Type: Three batteries charged in sequence
Compatibility: DJI Avata 2 Intelligent Flight Battery

Recommended microSD Cards 

SanDisk Extreme PRO 32GB U3 A1 V30 microSDHC
Lexar Professional 1066x 64GB U3 A2 V30 microSDXC
Lexar Professional 1066x 128GB U3 A2 V30 microSDXC
Lexar Professional 1066x 256GB U3 A2 V30 microSDXC
Lexar Professional 1066x 512GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC
Kingston CANVAS React Plus 64GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 128GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 256GB U3 A1 V90 microSDXC
Samsung EVO Plus 512GB U3 A2 V30 microSDXC


Includes

1x DJI AVATA 2
1x DJI Goggles 3
1x RC Motion 3
1x Flight Battery
2x Propeller Sets
1x Screwdriver
1x Lanyard
1x -2.0D Corrective lenses (Set)
1x Additional Forehead Pad
1x USB-C OTG Cable
1x Type-C USB Cable
1x Manuals


All products with batteries must be shipped by a ground shipping method. Includes the DJI Avata 2 drone, Goggles 3, RC Motion 3, and more. This combo lets you quickly get started with Avata 2 and experience the joy of immersive flight. Check out our other RTF combos, all our pre-built quads and all of our DJI products!

DJI AVATA 2 Fly More Combo RTF Kit - Single Battery

PRE-ORDERS shipping ASPA!!! All products with batteries must be shipped by a ground shipping method.
Compared to the DJI Avata 2 Fly More Combo (Single Battery), this extended combo additionally includes one Two-Way Charging Hub, two batteries, and one sling bag, offering a more comprehensive setup that eases your range anxiety and lets you explore more flight scenarios.
Check out our other RTF combos, all our pre-built quads and all of our DJI products!
Features






All Thrills, No Frills

Immersive Flight Experience
Intuitive Motion Control
Tight Shots in Super-Wide 4K
Easy ACRO
Built-in Propeller Guard
Hassle-Free POV Content

Fully Experience Flight DJI Avata 2 delivers an adrenaline-pumping immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the new DJI Goggles 3 and DJI RC Motion 3.DJI Goggles 3Visionary BreakthroughDJI Goggles 3 now has Real View PiP (Picture-In-Picture). Observe your surroundings without removing the goggles, for more safety and immersion. The Micro-OLED high-definition display and ultra-low-latency transmission bring the world in to view.
DJI RC Motion 3Feel Every FlightEffortlessly perform difficult aerial acrobatics with DJI RC Motion 3. New pilots can now perform spectacular flips, drifts, and other captivating maneuvers.
Easy ACROSoar, dive, and roll for stunning aerial footage with a single push. Capturing epic FPV footage with DJI RC Motion 3 and Avata 2 is easier than ever.


One-Push Flip: 360° front/back flip, adding fresh twists to your footage.

One-Push Roll: Roll 360° left/right, turning any shot from meh to magic.


One-Push 180° Drift: High-speed lateral drifts to yaw spin 180° past objects and swiftly pull away, achieving dramatic visuals.

Tight Shots in Super-Wide 4K Create breathtaking visuals with Avata 2's 155° FOV and its ability to swiftly approach and pull away from subjects. New pilots can quickly master aerobatic shots and capture fast-moving dynamic low-altitude shots that other drones can't.

155° Ultra-Wide-Angle FOV of Avata 2
82° Standard View of Camera Drones

1/1.3-inch Image SensorThe upgraded 1/1.3-inch image sensor expands the captured dynamic range, handling low-light conditions more effectively to capture outstanding footage on every flight.

Effective Pixels: 12 MP
Offline Stabilization: Gyroflow

Immersion Reimagined4K/60fps HDR VideosUnleash your true aerial potential. The 4K/60fps HDR on Avata 2 captures all the awesome of high-speed flight. In the goggles, you can adjust the sharpness and noise reduction levels for more finely tuned videos.
RockSteadyEquipped with DJI's latest stabilization algorithm, Avata 2 captures smooth, steady footage even when flying at high speeds or in windy conditions.RockSteady On | RockSteady Off
HorizonSteadyHorizonSteady handles horizontal rotations up to 360°, ensuring the captured footage remains locked on the horizon even if the drone turns sharply or sways dramatically.HorizonSteady On | HorizonSteady Off
155° Ultra-Wide-Angle FOVAmplify your vision and increase the immersion of low-altitude, high-speed flights. Avata 2 offers ultra-wide-angle, wide-angle, and normal-angle FOV options giving you the ability to adjust to the scenario.Ultra-Wide-Angle | Wide-Angle | Normal
10-bit D-Log MCapture rich detail in highlights and shadows and enhance content post-production opportunities while further streamlining color-grading.Standard Mode | 10-bit D-Log M Mode
Got You CoveredComprehensive SafetyThe updated integrated propeller guard design of Avata 2 makes it lighter and more agile, enabling it to navigate freely in tight spaces. Releasing the accelerator on RC Motion 3 or pressing the lock button brings the drone to a halt, allowing you to handle unexpected situations calmly. In addition, the automatic Return to Home (RTH) function is initiated when the drone's battery is low or in case of signal loss, adding an extra layer of security.3D Preview | AR Preview
Advanced Positioning with New SensorsNew binocular fisheye sensors enable downward and backward visual positioning during low-altitude and indoor flights, enhancing flight stability and safety.
Turtle ModeAvata 2 can automatically flip itself back into takeoff position when upside down with Turtle mode enabled, so you can quickly get airborne again.
Excellence in EverythingFlight Time/Video TransmissionThe Sky's the Limit With Longer Flight. Avata 2 boasts a maximum flight time of 23 minutes and supports PD fast charging, so you can quickly recharge it and take to the skies again.The new DJI Avata 2 Two-Way Charging Hub features a power accumulation function, allowing the transfer of remaining power from multiple batteries to the one with the highest charge level, giving you an "extra battery" in critical moments.
O4 Video Transmission, Enhanced PerceptionDJI O4 video transmission's enhanced stability lets you fully immerse yourself in each flight and provides greater safety. Its two-transmitter, four-receiver, four-antenna design ensures strong anti-interference performance, and it boasts up to 13 km of maximum video transmission distance, a transmission latency as low as 24 ms, 1080p/100fps high-definition image quality, and a maximum transmission bitrate of 60Mbps.
Boundless Passion, Wireless SharingWatch the DJI Goggles 3 live feed from Avata 2 on your smart device's DJI Fly App. Connect up to 5 m away. Sharing the excitement of FPV just got easier, and learning how to fly is more accessible than ever.
Save More, Share MoreCapture and Edit SeamlesslyAvata 2 comes equipped with 46GB internal storage, capable of storing approximately 90 minutes of 1080p/60fps video, ensuring you capture the best parts of each flight.With Wi-Fi connectivity for fast file transfer to your phone, post-editing and sharing of your finished work is highly efficient.One-Tap VFX with LightCutThe LightCut app, connecting directly to DJI Avata 2 via Wi-Fi, allows you to intelligently add Sky VFX during post based on the flight trajectory captured in your videos, helping you easily create engaging aerial footage. Without the need to download the footage, the app offers editing and, combined with ‌One-Tap Edit, allows you to produce polished content in a snap effortlessly.


Sky VFX: After connecting the device and importing the footage, tap Sky VFX to add unique overlays, through-the-air text animations, virtual cockpits, and dashboard effects, enhancing the interactive fun and engagement of your immersive flight footage

One-Tap Edit: With AI's intelligent recognition of video types and themes, you can effortlessly filter through and select highlights with smooth camera work and exquisite composition. Coupled with a vast array of thematic templates, enabling you to produce polished content. The app also boasts intelligent sound effects, color restoration, one-click addition of device watermarks, and end credits, among other features

Wireless Connection: When Avata 2 is connected wirelessly to LightCut, you can preview the captured footage within the app and edit it without the need to download the footage, saving valuable space on your smartphone



Specifications
DJI Avata 2

Takeoff Weight: 377g Approx.
Dimensions: 185×212×64mm (L×W×H)
Max Ascent Speed: 6 m/s (Normal mode), 9 m/s (Sport mode)
Max Descent Speed: 6 m/s (Normal mode), 9 m/s (Sport mode)
Max Horizontal Speed (near sea level, no wind): 8 m/s (Normal mode), 16 m/s (Sport mode), 27 m/s (Manual mode)* No faster than 19 m/s with the Manual mode in the EU regions.

Max Takeoff Altitude: 5000m * Measured in a windless environment when taking off from an altitude of 5000 m and ascending vertically by 500 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.

Max Flight Time: Approx. 23 mins * Measured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Hovering Time: Approx. 21 mins * ‌‌Measured when hovering in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Flight Distance: 13.0 km * ‌Measured when flying forward at a speed of 43.2 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.
Max Wind Speed Resistance: 10.7 m/s (Level 5)
Operating Temperature: -10° to 40° C (14° to 104° F)
Global Navigation Satellite System: GPS + Galileo + BeiDou
Hovering accuracy range Vertical:

±0.1 m (with vision positioning)
±0.5 m (with GNSS positioning)

Horizontal:

±0.3 m (with vision positioning)
±1.5 m (with GNSS positioning)

Internal Storage: 46 GB


Camera

Image Sensor: 1/1.3-inch image sensor
Effective Pixels: 12 MP
Lens FOV: 155°
Format Equivalent: 12 mm
Aperture: f/2.8
Focus: 0.6 m to ∞
ISO Range: 100-25600 (Auto), 100-25600 (Manual)
Shutter Speed Video: 1/8000-1/30 s, Photo: 1/8000-1/50 s
Max Image Size: 4000×2256 (16∶9), 4000×3000 (4∶3)
Still Photography Mode: Single shot
Photo Format: JPEG
Video Resolution

-4K (4∶3): 3840×2880@30/50/60fps
-4K (16∶9): 3840×2160@30/50/60fps
-2.7K (4∶3): 2688×2016@30/50/60fps
-2.7K (16∶9): 2688×1512@30/50/120fps
-1080p (4∶3): 1440×1080@30/50/120fps
-1080p (16∶9): 1920×1080@30/50/120fps


Video Format: MP4 (H.264/H.265)
Max Video Bitrate: 130 Mbps
Supported File System: exFAT
Color Mode: Standard, D-Log M
Camera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.
Camera EIS: Supports RockSteady 3.0+ and HorizonSteady, * Can be disabled *When stabilization is turned off, footage captured with the wide-angle view supports offline stabilization Gyroflow.

Gimbal

Stabilization: Single-axis mechanical gimbal (tilt)
Mechanical RangeC85: Tilt: -95° to 90°
Controllable Range: Tilt: -85° to 80°
Max Control Speed (tilt): 100°/s
Angular Vibration Range: ±0.01°
Electronic Roll Axis: Real-time screen correction is unavailable during recording, but can be applied to the footage recorded on the drone.

Sensing

Sensing Type: Downward and backward visual positioning
Downward

-ToF Effective Measurement Height: 10 m-Precise Hovering Range: 0.3-10 m-Measurement Range: 0.3-20 m-FOV: Horizontal 78°, Vertical 78°

Sensing Backward

-Measurement Range: 0.5-20 m-FOV: Horizontal 78°, Vertical 78°

Sensing Operating Environment

-Diffuse reflective surfaces with discernible patterns, diffuse reflectivity &gt 20% (such as concrete pavement)-Adequate lighting (lux &gt 15, normal indoor lighting conditions)
Video Transmission

Video Transmission System: O4
Live View Quality: 1080p@30/50/60/100fps
Operating Frequency:

-2.400-2.4835 GHz-5.170-5.250 GHz*-5.725-5.850 GHz** 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.

Transmitter Power (EIRP):

-2.4 GHz＜33 dBm (FCC)＜20 dBm (CE/SRRC/MIC)-5.1 GHz&lt 23 dBm (CE)-5.8 GHz＜33 dBm (FCC)＜30 dBm (SRRC)&lt 14 dBm (CE)

Communication Bandwidth Max 60 MHz
Max Transmission Distance (unobstructed, free of interference)

-FCC: 13 km (subject to the aircraft's max flight distance)-CE: 10 km-SRRC: 10 km-MIC: 10 km* Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.

Max Transmission Distance (unobstructed, with interference)

-Strong Interference: Urban landscape, approx. 1.5-4 km-Medium Interference: Suburban landscape, approx. 4-10 km-Low Interference: Suburb/seaside, approx. 10-13 km* Data tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

Max Transmission Distance (obstructed, with interference)

-Low Interference and Obstructed by Buildings: approx. 0-0.5 km-Low Interference and Obstructed by Trees: approx. 0.5-3 km* Data tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.

Max Download Speed: Wi-Fi: 30 MB/s

* Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.

Lowest Latency With DJI Goggles 3:

-1080p/100fps Video Transmission Quality: 24 ms-1080p/60fps Video Transmission Quality: 40 ms

Max Video Bitrate: 60Mbps
Antennas: 4 antennas, 2T4R

Wi-Fi

ProtocolC156: 802.11a/b/g/n/ac
Operating Frequency: 2.400-2.4835 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP):

-2.4 GHz&lt20 dBm (FCC／CE／SRRC／MIC)-5.8 GHz&lt20 dBm (FCC／SRRC)&lt 14 dBm (CE)
Bluetooth

Protocol: Bluetooth 5.0
Operating Frequency: 2.400-2.4835 GHz
Transmitter Power (EIRP): &lt10 dBm

Intelligent Flight Battery

Capacity: 2150 mAh
Weight: 145g Approx.
Standard Voltage: 14.76 V
Max Charging Voltage: 17 V
Battery Type: Li-ion
Energy: 31.7 Wh@0.5C
Charging Temperature: 5° to 40° C (41° to 104° F)
Charging Time:

-With Charging Hub (60W max charging power)From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 min-Directly Charging the Drone (30 W max charging power)From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min
Charger

Recommended Charger: DJI 65W Portable Charger, DJI 65W Car Charger, USB Power Delivery charger

Battery Charging Hub

Input: 5-20 V, max 3 A
Output (power accumulation): Max 65 W
Output (charging): Max 17 V
Output (USB): 5 V, 2 A
Charging Type: Three batteries charged in sequence
Compatibility: DJI Avata 2 Intelligent Flight Battery

Recommended microSD Cards 

SanDisk Extreme PRO 32GB U3 A1 V30 microSDHC
Lexar Professional 1066x 64GB U3 A2 V30 microSDXC
Lexar Professional 1066x 128GB U3 A2 V30 microSDXC
Lexar Professional 1066x 256GB U3 A2 V30 microSDXC
Lexar Professional 1066x 512GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC
Kingston CANVAS React Plus 64GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 128GB U3 A1 V90 microSDXC
Kingston CANVAS React Plus 256GB U3 A1 V90 microSDXC
Samsung EVO Plus 512GB U3 A2 V30 microSDXC

Includes

1x DJI AVATA 2
1x DJI Goggles 3
1x RC Motion 3
3x Flight Battery
1x Sling Bag
1x Charging Hub
2x Propeller Sets
1x Screwdriver
1x Lanyard
1x -2.0D Corrective lenses (Set)
1x Additional Forehead Pad
1x USB-C OTG Cable
1x Type-C USB Cable
1x Manuals


PRE-ORDERS shipping ASPA!!! All products with batteries must be shipped by a ground shipping method. Compared to the DJI Avata 2 Fly More Combo (Single Battery), this extended combo additionally includes one Two-Way Charging Hub, two batteries, and one sling bag, offering a more comprehensive setup that eases your rang

(PRE-ORDER) DJI AVATA 2 Fly More Combo RTF kit - Three Battery

BetaFPV RTF Cetus X FPV Analog Kit

All batteries must be shipped by a ground shipping method. 
Whether you&#39re a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV.
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:

BetaFPV 1S 300mAh - BT2.0

Check out our other RTF combos, all our pre-built quads, and our BetaFPV selection!


Features

Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level.
Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon.
Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop &ampamp impact and reduces the risk of damage, giving you more peace of mind.
The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots.
LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market.
The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment.

Powerful Propulsion System
Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience.

Recording Every Flight Moment
Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience.

Improved Video Transmission
Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera.

LiteRadio 3 Radio Transmitter
This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you.

FPV Simulator Supported
First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here.

Various Modes, Accessible to All
Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you&#39re a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one.

BETAFPV Cetus Series
The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus ..

All batteries must be shipped by a ground shipping method.  Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every 

BetaFPV RTF Cetus X FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case from WREKD Co.

BetaFPV RTF Cetus X FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case

Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV.
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:

BetaFPV 1S 300mAh - BT2.0

Check out our other RTF combos, all our pre-built quads, and our BetaFPV selection!


Features

Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level.
Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon.
Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop &amp impact and reduces the risk of damage, giving you more peace of mind.
The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots.
LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market.
The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment.

Powerful Propulsion System
Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience.

Recording Every Flight Moment
Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience.

Improved Video Transmission
Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera.

LiteRadio 3 Radio Transmitter
This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you.

FPV Simulator Supported
First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here.

Various Modes, Accessible to All
Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one.

BETAFPV Cetus Series
The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots.

Specification

Item: Cetus X FPV Kit
Weight: 55g
Wheelbase: 95mm

FC: F4 2S 15A V1.0 (Betaflight FC Version)

Motors: 1103 11000KV Motor
Props: Gemfan 2020 4-Blades Props
Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4)
Camera Adjustable Angle: 0°-40°
Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus)
VTX: M04 25-400mW VTX
Quadcopter: Cetus X Brushless Quadcopter
Transmitter: LiteRadio 3 Radio Transmitter
Goggles: VR03 FPV Goggles
Battery: 2x BT2.0 450mAh 1S 30C Battery
Flight time: 5 mins
Antennas: U.FL for Quad | RP-SMA for Goggles

Includes

1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver)
1x LiteRadio 3 Transmitter (ELRS 2.4G)
1x BETAFPV VR03 FPV Goggles 
4x BT2.0 450 mAh 1S Lipo Battery 
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C to FC Adapter
1x Prop Removal Tool
4x Gemfan 2020 4-Blades Prop (Spare Set)
1x Portable Storage Bag

FAQ

For more info and instructions, please check the User Manual for Cetus X FPV Kit.
Please DO NOT configure ESC or Motor settings on the Betaflight configurator.
The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function.
The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.


Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. Wi

BetaFPV RTF Cetus X FPV Analog Kit - Cetus Whoop, Goggles, Transmitter

EMAX RTF Tinyhawk III Plus Freestyle Kit - HDZero, ELRS 2.4GHz

EMAX Tinyhawk 3 Plus Freestyle HDZero RTF Drone with RC/GogglesIMPROVEMENTEmbark on the future of outdoor FPV quadcopters with the all-new Tinyhawk III Plus Freestyle, tailor-made for those ready to embrace the excitement of outdoor drone flights.INCREDIBLE DURABILITYCrafted from an upgraded aerospace-grade 3k woven carbon fiber blend, durability reaches new heights. This advanced blend ensures the Tinyhawk III Plus Freestyle can confidently endure high-impact situations while maintaining its lightweight agility. The frame proudly displays an eye-catching designer pattern, setting it apart with its unique charm.IMPROVED VTXWith increased transmission power, the Tinyhawk III Plus Freestyle punches through interference and obstacles with ease. You&#39ll experience a more robust signal, allowing you to fly with confidence even in challenging environments. Our engineers have fine-tuned the analog system to optimize signal strength while maintaining stability, so you can f...

EMAX Tinyhawk 3 Plus Freestyle HDZero RTF Drone - RMRC

EMAX Tinyhawk 3 Plus Freestyle HDZero RTF Drone with RC/Goggles

Pre-Orders shipping ASAP!  All products containing batteries must be shipped by a ground shipping method.
Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5&quot propellers for exceptional grip and thrust. Durability is elevated with an upgraded 3K Carbon Fiber-blend frame. 
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. 
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Freestyle HDZero BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 HDZero Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware. 
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!



Specifications
TINYHAWK 3 PLUS FREESTYLE HDZERO BNF 

Wheelbase: 110mm
Weight: 65.5g
Motor: 12025 7000KV
Propellers: AVAN Rush 2.5
Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)
Camera: RunCam HDZero Nano Lite
VTX: HDZero Whoop Lite 0/25mW/200mW
Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm
Weight: 260g
Channels: 8
Protocol: ELRS 2.4G
Band: 2.4gHz（2400-2483.5MHz）
Power Levels: 10mW/25mW/50mW/100mW
Battery: 800mAh 18650
Charging: USB-C 1A Recommended
Operating Voltage: 3.7-4.2V
Input: Type-C, 3.5mm

TRANSPORTER 2 HDZERO GOGGLES:

Dimensions: LxWxH=155x100x90mm
Weight: 425g
Screen Resolution: 720x1080
Screen Size: 4.45 Inch
Battery: 2200mAh Integrated
Operating Voltage: 3.7V-4.2V
Band: Digital HDZero 5.8GHz（5658-5945MHz）
Charging: USB-C 1A Recommended
DVR: 32GB Micro SD Recommended


Includes

1x Tinyhawk 3 Plus Freestyle HDZero BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 HDZero Goggles

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit

1x HDZero Firmware Update Cable Kit


Pre-Orders shipping ASAP!  All products containing batteries must be shipped by a ground shipping method. Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan

EMAX RTF Tinyhawk III Plus Freestyle Ready-to-Fly ELRS 2.4GHz HDZero Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone from WREKD Co.

(PRE-ORDER) EMAX RTF Tinyhawk III Plus Freestyle Ready-to-Fly ELRS 2.4GHz HDZero Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

Sub250

Sub250 RTF Whoopfly16 Analog Kit - 2.4GHz ELRS

All products containing batteries must be shipped by a ground shipping method.











Start your FPV journey with the Sub250 Whoopfly16 Ready to Fly Kit - which protects you in the sky with its inverted pusher design and protective frame. Comes with the Drone, Radio Transmitter, Goggles 01, and a Case to get you out flying right away and experiencing the thrills of FPV!
















Sub250 MicroRadio ELRS 2.4GHz remote control with a maximum transmission power of 500mW, 8 channels of ultra-low latency, working off replaceable 18650 batteries, and supporting USB type-C charging.
The FPV Goggles 01 uses dual antennas, support card recording DVR, built-in 3.7V 2000mAh battery that can be used for up to 2.5 hours, supports USB fast charging, and one-key search frequency point. Featuring a multi-function menu design, making the operation more convenient.
You&#39re going to need 18650s Batteries for this kit!



















Check out our other RTF combos, all our pre-built quads, as well as the rest of our Sub250 selection!
Features

Throttle Stick on the left joystick (mode2)
DVR Recording
Built-in 200mW VTX
ELRS 2.4GHz 
Camera 30° Anjustable
1S Power













 
Specifications:

Product name: Whoopfly16 Analog ELRS 2.4
Frame: WF16
Wheelbase size: 75mm
Flight control system: Redfox A1 F4 5A 4in1 1S AIO FC
MCU: STMF411
IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip
ESC: Redfox A1 4IN1 5A ESC
VTX: VTX 5.8G 200mW
Lens: Caddx Ant eco
Propeller: Gemfan 1608-3
Antenna: 5.8g copper tube antenna 70mm
ELRS Version weight: 35.2g
Receiver: ELRS 2.4G (SPI)

SUB250 MICRORADIO ELRS 2.4G TRANSMITTER

Product name: MicroRadio
Size：147x135x71mm (Not including antenna)
Weight：223g
Adapted Drone Type: Multirotor, Airplane
Frequency band：2.4GHz ISM
Input voltage：6.6-8.4V
Antenna interface: SMA
Power：100/250/500mW
Channel：8 channel
Charging interface: USB-C
Firmware upgrade: Support
Bluetooth joystick: Support

Sub250 Goggles 01

Product name: Goggles 01
Resolution：800 x 480px
Size of screen: 4.3 inch
Size: 155mm x 144mm x 113mm
Built-in Batteries: 3.7v / 2000 mAh
Working Time: 2.5 hours
Weight: 314.6g

Includes:

1x Sub250 RTF Whoopfly16 Ready to Fly ELRS Analog Kit - Model 2 w/ Goggles, Radio Transmitter, Case &ampamp Drone
1x MicroRadio
1x Sub250 Goggles 01
1x Sub-CW1 charger
2x Sub250 530mAh 90C 1S batteries
4x 1608-3 Propellers
1x Phillips screwdriver
1x L-type Allen screwdriver (1.5mm)
1x Portable Storage Bag


All products containing batteries must be shipped by a ground shipping method. Start your FPV journey with the Sub250 Whoopfly16 Ready to Fly Kit - which protects you in the sky with its inverted pusher design and protective frame. Comes with the Drone, Radio Transmitter, Goggles 01, and a Case to get you out flying ri

Sub250 RTF Whoopfly16 Ready to Fly ELRS 2.4GHz Analog Kit  w/ Goggles, Radio Transmitter, Case & Drone from WREKD Co.

Sub250 RTF Whoopfly16 Ready to Fly ELRS 2.4GHz Analog Kit  w/ Goggles, Radio Transmitter, Case & Drone

EMAX RTF Tinyhawk III Plus Analog Whoop - 2.4GHz ELRS

Emax

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers&#39 feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


All products containing batteries must be shipped by a ground shipping method. The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the idea

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone from WREKD Co.

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

EMAX RTF Tinyhawk III Plus Analog Freestyle Kit - ELRS 2.4GHz

EMAX Tinyhawk 3 Plus Freestyle Analog RTF Drone with RC/GogglesIMPROVEMENTEmbark on the future of outdoor FPV quadcopters with the all-new Tinyhawk III Plus Freestyle, tailor-made for those ready to embrace the excitement of outdoor drone flights.INCREDIBLE DURABILITYCrafted from an upgraded aerospace-grade 3k woven carbon fiber blend, durability reaches new heights. This advanced blend ensures the Tinyhawk III Plus Freestyle can confidently endure high-impact situations while maintaining its lightweight agility. The frame proudly displays an eye-catching designer pattern, setting it apart with its unique charm.IMPROVED VTXWith increased transmission power, the Tinyhawk III Plus Freestyle punches through interference and obstacles with ease. You&#39ll experience a more robust signal, allowing you to fly with confidence even in challenging environments. Our engineers have fine-tuned the analog system to optimize signal strength while maintaining stability, so you can f...