FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Vanover

Vanover BNF Vannystyle Pro TrueX 5" Drone - ELRS

WREKD Co.

A high-performance FPV drone built and tuned by the team at WREKD Co. It can take 2 to 10 days to build depending on time of year. Usually ships quickly!
Contact the team at support@wrekd.com with any questions or requests.
This is a custom built, tuned, and up to date high performance drone that comes with the latest and greatest hardware, including ELRS and your choice of video transmission tech. Knowledge of Betaflight and experience with flying FPV and the hobby is required.
Requirements


Requires an ELRS Radio or Module

Transmitter or Radio Module.

Requires an HDZERO VRX (Video Receiver) Built-in to Goggles or attached to FPV Goggles.- or - Analog Video Receiver built-in or attached to FPV Goggles

Intermediate to Expert level skill in flying high-speed 6S quadcopters.
A lot of space to fly, open field.
Suggested: A basic understanding of configuring Betaflight modes to match your radio.
DO NOT FLY AROUND PEOPLE.

Configuration
Your freestyle drone comes pre-configured and tuned.
Here are some highlights:

Motors rotating out "Props Out" to prevent snags on trees and to prevent grass in the camera.
Tuned for Smooth Yet Snappy Freestyle
Preset loaded for ELRS (500Hz)

Specifications

Flight Controller: Hobbywing F7 Flight Controller

ESC: Hobbywing 65A ESC

Motors: VCI 2306 1850Kv or 1950Kv

VTX: DJI O3 VTX or HDZERO Freestyle V2 VTX or Foxeer Extreme 2.5W Analog VTX


Camera: DJI O3 Camera or HDZERO Nano 90 or Foxeer Predator Nano Analog Camera
Props: 2 Packs of HQ Juicy J37 4.9x3.7x3 Props


Includes

1 x Vannystyle Pro Built &amp Tuned Freestyle Drone Ready-to-bind to Your Radio




2 x Packs of HQ Juicy J37 4.9x3.7x3 Props




A high-performance FPV drone built and tuned by the team at WREKD Co. It can take 2 to 10 days to build depending on time of year. Usually ships quickly! Contact the team at support@wrekd.com with any questions or requests. This is a custom built, tuned, and up to date high performance drone that comes with the latest 

Vannystyle Pro (TrueX) 5" Built & Tuned FPV Drone w/ ELRS - Choose Options

Vannystyle Pro (TrueX) 5" Built & Tuned FPV Drone w/ ELRS - Choose Opt

Pre-Built Quad Kit Type

Pre-Built Quads and Kits

Quad Frame Size

Quad Type

Vanover BNF Vannystyle Pro Squish 5" Drone - ELRS

Vannystyle Pro (Squish) 5" Built & Tuned FPV Drone w/ ELRS - Choose Options

Vannystyle Pro (Squish) 5" Built & Tuned FPV Drone w/ ELRS - Choose Op

Vanover BNF Vannystyle Original 5" Drone - ELRS

A high-performance FPV drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on time of year. Usually ships quickly!
This is a custom, tuned, and up to date high performance drone that comes with the latest and greatest hardware, including ELRS and your choice of video transmission tech.
Requirements


Requires an ELRS Radio or Module


Transmitter or Radio Module.


Requires an HDZERO VRX (Video Receiver) Built-in to Goggles or attached to FPV Goggles.- or - Analog Video Receiver built-in or attached to FPV Goggles


Intermediate to Expert level skill in flying high-speed 6S quadcopters.


A lot of space to fly, open field.

Suggested: A basic understanding of configuring Betaflight modes to match your radio.
DO NOT FLY AROUND PEOPLE.

Configuration
Your freestyle drone comes pre-configured and tuned.
Here are some highlights:

Motors rotating out "Props Out" to prevent snags on trees and to prevent grass in the camera.
Tuned for Smooth Yet Snappy Freestyle
Preset loaded for ELRS (500Hz)

Specifications

Flight Controller: Hobbywing F7 Flight Controller

ESC: Hobbywing 65A ESC

Motors: VCI 2306 1850Kv or 1950Kv

VTX: 
 DJI O3 VTX or HDZERO Freestyle V2 VTX or Foxeer Extreme 2.5W Analog VTX
Camera: DJI O3 Camera or HDZERO Nano 90 or Foxeer Predator Nano Analog Camera
Props: 
2 Packs of HQ Juicy J37 4.9x3.7x3 Props


Includes

1 x WREKD Built &amp Tuned Freestyle Drone Ready-to-bind to Your Radio


2 x Packs of HQ Juicy J37 4.9x3.7x3 Props




A high-performance FPV drone built and tuned by our team at WREKD Co. It can take 2 to 10 days to build depending on time of year. Usually ships quickly! This is a custom, tuned, and up to date high performance drone that comes with the latest and greatest hardware, including ELRS and your choice of video transmission 

Vannystyle Original 5" Built & Tuned FPV Drone w/ ELRS - Choose Options

Vannystyle Original 5" Built & Tuned FPV Drone w/ ELRS - Choose Option

DarwinFPV

DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad













PNP version in stock and shipping SAME DAY! ELRS Pre-Orders shipping ASAP!
For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer.
DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ.








BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h. 
The 4S version comes with powerful 1504-3600Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver!












Check out our other pre-built quads, as well as the rest of our DarwinFPV selection! 
Features

Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance；
It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster
The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable
The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash
The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.








 

Specifications

Brand: DarwinFPV

Model: BabyApe Ⅱ 4S

Frame: Wide X

Wheelbase: 156mm

Size: 126mmx150mmx50mm

Flight Control: F411 MPU6500 AT7456E

Firmware：DARWINF411

Firmware: BETAFPV_Nano_2400_RX

The receiver's factory firmware is ELRS_V3.2.0
Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB

ESC: Bluejay 48KHz 3-6S 30A
Motor:  4S version：1504-3600KV

Propeller: HQProp T3.5x2x3GR-PC

Weight: 135.4 g (analog version)

Receiver: ELRS 2.4GHz

Darwin FPV "Cement" Ultra Durable FPV Drone Camera

Sensor type：1/3" CMOS Sensor

Image：16:9

TV System: NTSC

Horizontal Resolution：1200TVL
Lens：2.1mm 160°

Electronic Shutter: 1/50~1/100000 sec

Video Output: CVBS

Min. Illumination：0.001Lux

wb: automatic

DNR: 3D DNR

WDR: 100db

Input voltage: DC 3.7-24V

Working current：80mA@DC12V/170mA@DC5V

IP: IP67

Size：19x19mm

Weight：7.9g

DarwinFPV 25/200/400/600mW VTX

Output Power: 25/200/400/600mW(adjustable)

Frequency: 5.8Hz 40port

Power Supply Voltage Range: 5V

Weight: 3.5g

Pitch: 28x15mm(length x width)

Protocol: SmartAudio

Indicator Light Description:





Includes

1x DarwinFPV BNF Baby Ape V2 3.5" Analog Micro Quad - 4S - Choose Your Receiver
4x HQProp T3.5x2x3GR-PC 

2x Battery cable strip ( 10x170mm)

2x EVA shock pad（thickness：10㎜）

1x Spare screws bag

1x Sticker

1x Manual


PNP version in stock and shipping SAME DAY! ELRS Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for

DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 4S - Choose Your Receiver

DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 4S - Choose Your Re





For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer.
DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ.








BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h. 
The 6S version comes with powerful 1504-2300Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver!




Check out our other pre-built quads, as well as the rest of our DarwinFPV selection! 
Features

Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high cost performance；
It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster
The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable
The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash
The independent action camera base can be used with naked gopro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.







 



Specifications


Brand: DarwinFPV

Model: BabyApe Ⅱ 6S

Frame: Wide X

Wheelbase: 156mm

Size: 126mmx150mmx50mm

Flight Control: F411 MPU6500 AT7456E

Firmware： DARWINF411
Firmware: BETAFPV_Nano_2400_RX

The receiver's factory firmware is ELRS_V3.2.0
Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB
ESC: Bluejay 48KHz 3-6S 30A
Motor： 6S version：1504-2300KV

Propeller: HQProp T3.5x2x3GR-PC

Weight: 135.4 g(analog version)

Receiver: ELRS 2.4GHz

Darwin FPV "Cement" Ultra Durable FPV Drone Camera

Sensor type：1/3" CMOS Sensor

Image：16:9

TV System: NTSC

Horizontal Resolution：1200TVL
Lens：2.1mm 160°

Electronic Shutter: 1/50~1/100000 sec

Video Output: CVBS

Min. Illumination：0.001Lux

wb: automatic

DNR: 3D DNR

WDR: 100db

Input voltage: DC 3.7-24V

Working current：80mA@DC12V/170mA@DC5V

IP: IP67

Size：19x19mm

Weight：7.9g

DarwinFPV 25/200/400/600mW VTX

Output Power: 25/200/400/600mW(adjustable)

Frequency: 5.8Hz 40port

Power Supply Voltage Range: 5V

Weight: 3.5g

Pitch: 28x15mm(length x width)

Protocol: SmartAudio

Indicator Light Description:


Includes

1x DarwinFPV BNF Baby Ape V2 3.5" Analog Quad - 6S - Choose Your Receiver
4x HQProp T3.5x2x3GR-PC 

2x Battery cable strip ( 10x170mm)

2x EVA shock pad（thickness：10㎜）

1x Spare screws bag

1x Sticker

1x Manual


For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing

DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 6S - Choose Your Receiver

DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 6S - Choose Your Re













Pre-Orders shipping ASAP! 
For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer.
DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ.








BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries&#39 regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h. 
The 4S version comes with powerful 1504-3600Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver!












Check out our other pre-built quads, as well as the rest of our DarwinFPV selection! 
Features

Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance；
It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster
The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable
The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash
The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.








 

Specifications

Brand: DarwinFPV

Model: BabyApe Ⅱ 4S

Frame: Wide X

Wheelbase: 156mm

Size: 126mmx150mmx50mm

Flight Control: F411 MPU6500 AT7456E

Firmware：DARWINF411

Firmware: BETAFPV_Nano_2400_RX

The receiver&#39s factory firmware is ELRS_V3.2.0
Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB

ESC: Bluejay 48KHz 3-6S 30A
Motor:  4S version：1504-3600KV

Propeller: HQProp T3.5x2x3GR-PC

Weight: 135.4 g (analog version)

Receiver: ELRS 2.4GHz

Darwin FPV &quotCement&quot Ultra Durable FPV Drone Camera

Sensor type：1/3&quot CMOS Sensor

Image：16:9

TV System: NTSC

Horizontal Resolution：1200TVL
Lens：2.1mm 160°

Electronic Shutter: 1/50~1/100000 sec

Video Output: CVBS

Min. Illumination：0.001Lux

wb: automatic

DNR: 3D DNR

WDR: 100db

Input voltage: DC 3.7-24V

Working current：80mA@DC12V/170mA@DC5V

IP: IP67

Size：19x19mm

Weight：7.9g

DarwinFPV 25/200/400/600mW VTX

Output Power: 25/200/400/600mW(adjustable)

Frequency: 5.8Hz 40port

Power Supply Voltage Range: 5V

Weight: 3.5g

Pitch: 28x15mm(length x width)

Protocol: SmartAudio

Indicator Light Description:





Includes

1x DarwinFPV BNF Baby Ape V2 3.5&quot Analog Micro Quad - 4S - Choose Your Receiver
4x HQProp T3.5x2x3GR-PC 

2x Battery cable strip ( 10x170mm)

2x EVA shock pad（thickness：10㎜）

1x Spare screws bag

1x Sticker

1x Manual


Pre-Orders shipping ASAP!  For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always 

DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 4S - Choose Your Receiver from WREKD Co.

DarwinFPV BNF Baby Ape II Analog 3.5





Pre-Orders shipping ASAP! PNP in stock and shipping same day!
For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer.
DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ.








BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries&#39 regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h. 
The 6S version comes with powerful 1504-2300Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver!




Check out our other pre-built quads, as well as the rest of our DarwinFPV selection! 
Features

Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high cost performance；
It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster
The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable
The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash
The independent action camera base can be used with naked gopro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.







 



Specifications


Brand: DarwinFPV

Model: BabyApe Ⅱ 6S

Frame: Wide X

Wheelbase: 156mm

Size: 126mmx150mmx50mm

Flight Control: F411 MPU6500 AT7456E

Firmware： DARWINF411
Firmware: BETAFPV_Nano_2400_RX

The receiver&#39s factory firmware is ELRS_V3.2.0
Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB
ESC: Bluejay 48KHz 3-6S 30A
Motor： 6S version：1504-2300KV

Propeller: HQProp T3.5x2x3GR-PC

Weight: 135.4 g(analog version)

Receiver: ELRS 2.4GHz

Darwin FPV &quotCement&quot Ultra Durable FPV Drone Camera

Sensor type：1/3&quot CMOS Sensor

Image：16:9

TV System: NTSC

Horizontal Resolution：1200TVL
Lens：2.1mm 160°

Electronic Shutter: 1/50~1/100000 sec

Video Output: CVBS

Min. Illumination：0.001Lux

wb: automatic

DNR: 3D DNR

WDR: 100db

Input voltage: DC 3.7-24V

Working current：80mA@DC12V/170mA@DC5V

IP: IP67

Size：19x19mm

Weight：7.9g

DarwinFPV 25/200/400/600mW VTX

Output Power: 25/200/400/600mW(adjustable)

Frequency: 5.8Hz 40port

Power Supply Voltage Range: 5V

Weight: 3.5g

Pitch: 28x15mm(length x width)

Protocol: SmartAudio

Indicator Light Description:


Includes

1x DarwinFPV BNF Baby Ape V2 3.5&quot Analog Quad - 6S - Choose Your Receiver
4x HQProp T3.5x2x3GR-PC 

2x Battery cable strip ( 10x170mm)

2x EVA shock pad（thickness：10㎜）

1x Spare screws bag

1x Sticker

1x Manual


Pre-Orders shipping ASAP! PNP in stock and shipping same day! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-con

DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 6S - Choose Your Receiver from WREKD Co.

EMAX

EMAX BNF Tinyhawk III Plus Analog Freestyle Drone - 2.4GHz ELRS

Emax


All products containing batteries must be shipped by a ground shipping method.













Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5&quot propellers for exceptional grip and thrust. Durability is elevated with an upgraded 3K Carbon Fiber-blend frame. The analog system is optimized for signal strength and stability so that you can fly with confidence in challenging environments.  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.












Check out all our pre-built quads, and all our EMAX gear!




Specifications
TINYHAWK 3 PLUS FREESTYLE ANALOG BNF

Wheelbase: 110mm

Weight: 62.5g

Motor: 12025 7000KV

Propellers: AVAN Rush 2.5

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

Includes


1x Tinyhawk 3 Plus Freestyle Analog BNF

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger




All products containing batteries must be shipped by a ground shipping method. Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5" propellers for e

EMAX BNF Tinyhawk III Plus Freestyle 1-2S Analog Racing Drone w/ RunCam Nano  - ELRS 2.4 GHz from WREKD Co.

EMAX BNF Tinyhawk III Plus Freestyle 1-2S Analog Racing Drone w/ RunCam Nano  - ELRS 2.4 GHz


All products containing batteries must be shipped by a ground shipping method.













Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5" propellers for exceptional grip and thrust. Durability is elevated with an upgraded 3K Carbon Fiber-blend frame. The analog system is optimized for signal strength and stability so that you can fly with confidence in challenging environments.  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.












Check out all our pre-built quads, and all our EMAX gear!




Specifications
TINYHAWK 3 PLUS FREESTYLE ANALOG BNF

Wheelbase: 110mm

Weight: 62.5g

Motor: 12025 7000KV

Propellers: AVAN Rush 2.5

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

Includes


1x Tinyhawk 3 Plus Freestyle Analog BNF

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger




Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5" propellers for exceptional grip and thrust. Durability is elevated with an upgraded 3K Carbon Fiber-blend frame. The analog system is optimized for signal strength and stability, so you can fly with confidence in challenging environments. The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision. Check out all our pre-built quads, and all our EMAX gear! Specifications TINYHAWK 3 PLUS FREESTYLE ANALOG BNF Wheelbase: 110mm Weight: 62.5g Motor: 12025 7000KV Propellers: AVAN Rush 2.5 Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G) Camera: Runcam Nano VTX: 32Bit 40Ch 0/25mW/100mW/400mW Battery: 1S 650mAh Includes 1x Tinyhawk 3 Plus Freestyle Analog BNF 2x EMAX 1S HV 650mAh Battery 1x Hardware Kit 1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW) 1x USB Battery Charger

EMAX BNF Tinyhawk III Plus Freestyle 1-2S Analog Racing Drone w/ RunCam Nano - ELRS 2.4 GHz

EMAX Tinyhawk III Plus Analog Freestyle Bind-N-Fly BNF ELRS

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

EMAX Tinyhawk III Plus Freestyle Bind-N-Fly BNF ELRS - RMRC

iFlight

iFlight BNF Nazgul Evoque F4D 4" Deadcat HD Quad -DJI O3 Air Unit, ELRS 2.4GHz












Pre-Orders shipping ASAP! 
iFlight&#39s Nazgul Evoque F4D 6S 4&quot w/DJI O3 Air Unit &ampamp Micro Cam - ELRS 2.4GHz is a top-tier BNF drone. Another breakthrough in FPV visuals from DJI with iFlight&#39s upgraded frame and electronics. A new standard in Bind-And-Fly drones. The F4D has been designed to be effective at cinematic capture by excluding props from view. With a 2205 motor, this frame will have plenty of thrust to give you a strong and snappy responsive feel. 
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!












Features


Latest Nazgul Frame for Maximum Protection
The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.


DJI O3 HD Air Unit Low-Latency digital transmission
Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)


4K Stabilized Video with 155° Ultra-Wide Angle
Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)


Secured Battery Plug with Anti-Spark Filter
Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.


 Specifications

Frame: Evoque F4D 

FC: BLITZ Mini F7 Flight Controller

ESC: BLITZ Mini E55S 4-IN-1 2-6S 55A ESC

Video Transmission: DJI O3 Air Unit

Frame wheelbase: 185mm

Motor: XING2 2205 motors
Prop: HQ 4x3x3 propellers

Takeoff Weight: Approx. 330 g (Without battery)

Dimensions (L×W×H): 149×110×36 mm(Deadcat)

Diagonal Distance: 185 mm

Max Speed: 170 Km/h (Manual Mode)

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 8 mins

Max Flight Distance: 5 km

Max Wind Speed Resistance: Level 5

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: DJI O3 Air Unit Dual-Band Antenna

Video Transmission Specifications
Product Name: DJI O3 Air Unit

Communication Bandwidth: Max 40 MHz
FOV (single screen): 155°
Communication Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A

Includes

1x iFlight BNF Nazgul Evoque F4D 4&quot Deadcat HD 6S Quad w/DJI O3 Air Unit &ampamp Micro Cam - ELRS 2.4GHz

1x Battery Pad


2x HQ 4x3x3 Propeller 4 Pack

2x Battery Strap


Pre-Orders shipping ASAP! iFlight's Nazgul Evoque F4D 6S 4" w/DJI O3 Air Unit &amp; Micro Cam - ELRS 2.4GHz is a top-tier BNF drone. Another breakthrough in FPV visuals from DJI with iFlight's upgraded frame and electronics. A new standard in Bind-And-Fly drones. The F4D has been designed to be effective at cinematic c

iFlight BNF Nazgul Evoque F4D 4" Deadcat HD 6S Quad w/DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz from WREKD Co.

iFlight BNF Nazgul Evoque F4D 4

iFlight BNF Nazgul Evoque F4D 4" Deadcat HD 6S Quad w/DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

IFLIGHT












iFlight's Nazgul Evoque F4D 6S 4" w/DJI O3 Air Unit &amp Micro Cam - ELRS 2.4GHz is a top-tier BNF drone. Another breakthrough in FPV visuals from DJI with iFlight's upgraded frame and electronics. A new standard in Bind-And-Fly drones. The F4D has been designed to be effective at cinematic capture by excluding props from view. With a 2205 motor, this frame will have plenty of thrust to give you a strong and snappy responsive feel. 
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!












Features


Latest Nazgul Frame for Maximum Protection
The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.


DJI O3 HD Air Unit Low-Latency digital transmission
Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)


4K Stabilized Video with 155° Ultra-Wide Angle
Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)


Secured Battery Plug with Anti-Spark Filter
Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.


 Specifications

Frame: Evoque F4D 

FC: BLITZ Mini F7 Flight Controller

ESC: BLITZ Mini E55S 4-IN-1 2-6S 55A ESC

Video Transmission: DJI O3 Air Unit

Frame wheelbase: 185mm

Motor: XING2 2205 motors
Prop: HQ 4x3x3 propellers

Takeoff Weight: Approx. 330 g (Without battery)

Dimensions (L×W×H): 149×110×36 mm(Deadcat)

Diagonal Distance: 185 mm

Max Speed: 170 Km/h (Manual Mode)

Maximum Takeoff Altitude: 7000 m

Max Hover Time: Approx. 8 mins

Max Flight Distance: 5 km

Max Wind Speed Resistance: Level 5

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Antennas: DJI O3 Air Unit Dual-Band Antenna

Video Transmission Specifications
Product Name: DJI O3 Air Unit

Communication Bandwidth: Max 40 MHz
FOV (single screen): 155°
Communication Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency

With DJI FPV Goggles V2:

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

With DJI Goggles 2:

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A

Includes

1x iFlight BNF Nazgul Evoque F4D 4" Deadcat HD 6S Quad w/DJI O3 Air Unit &amp Micro Cam - ELRS 2.4GHz

1x Battery Pad


2x HQ 4x3x3 Propeller 4 Pack

2x Battery Strap


iFlight's Nazgul Evoque F4D 6S 4" w/DJI O3 Air Unit &amp; Micro Cam - ELRS 2.4GHz is a top-tier BNF drone. Another breakthrough in FPV visuals from DJI with iFlight's upgraded frame and electronics. A new standard in Bind-And-Fly drones. The F4D has been designed to be effective at cinematic capture by excluding props 

iFlight BNF Nazgul Evoque F4D 4" Deadcat HD 6S Quad w/DJI O3 Air Unit 

EMAX BNF Babyhawk DJI O3 3.5" Micro Quad - ELRS

EMAX Babyhawk 03 ELRS BNFIn the modern age of FPV and content creation, the need for a small fast portable drone capable of capturing 4k stabilized video footage has never been more necessary. In the pursuit of this, EMAX has updated one of its proven platforms to meet the demand for this capability, through the Babyhawk 03. The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit.Now with a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro. Customers can now capture high quality 4K video all with the onboard O3.STABILIZED VIDEOIn partnership with DJI, the Babyhawk 03 features a crisp 4k video feed with zero latency, enabling video capture in a variety of situations. Built int...

EMAX Babyhawk O3 ELRS BNF - RMRC

EMAX Babyhawk O3 3.5&quot ELRS BNF Quad

Pre-Orders shipping ASAP!
The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous generation and boasts a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long-flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro, a big complaint of the Babyhawk II. Customers can now capture high-quality 4K video all with the onboard O3.
Check out all our pre-built quads, and all our EMAX gear!
Features

Improved video transmission with DJI O3 system 

More durable frame redesigned for resilience.
Sub 250 grams




Specifications


Wheelbase: 155mm
Dry Weight: 154g
Frame Material: Carbon Fiber
Prop: Avan 3.5 
Maximum size: 210mm
Input Voltage: 2-4S Lipo





Includes



1x EMAX BNF Babyhawk O3 w/ DJI O3 Air Unit - ELRS





Pre-Orders shipping ASAP! The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous genera

EMAX BNF Babyhawk 3.5" Micro Quad w/ DJI O3 Air Unit - ELRS from WREKD Co.

EMAX BNF Babyhawk 3.5

(PRE-ORDER) EMAX BNF Babyhawk 3.5" Micro Quad w/ DJI O3 Air Unit - ELRS

Pre-Orders shipping ASAP!
The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous generation and boasts a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long-flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro, a big complaint of the Babyhawk II. Customers can now capture high-quality 4K video all with the onboard O3.
Check out all our pre-built quads, and all our EMAX gear!
Features

Improved video transmission with DJI O3 system 

More durable frame redesigned for resilience.
Sub 250 grams




Specifications


Wheelbase: 155mm
Dry Weight: 154g
Frame Material: Carbon Fiber
Prop: Avan 3.5 
Maximum size: 210mm
Input Voltage: 2-4S Lipo





Includes



1x EMAX BNF Babyhawk O3 w/ DJI O3 Air Unit - ELRS





(PRE-ORDER) EMAX BNF Babyhawk 3.5" Micro Quad w/ DJI O3 Air Unit - ELR

Flywoo

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1.6" Deadcat Micro Quad - HDZero, 2.4 GHz ELRS































Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the great capabilities of HDzero System.




















Check out our other pre-built quads, as well as other great products from Flywoo!










Features


Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. 
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.



Dead Cat Style


















The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.



















New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.

Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.

Ultra-light AIO with ELRS 2.4G RXThe drone&#39s GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.
 





































HD Digital VTX System


The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator.



More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed. 

Specifications


Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit

Motor: ROBO 1002 19800KV

Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0

Propeller: 1608-3 Blade 40mm 1.5mm Shaft

Camera: Nano Lite Cam

Weight: 31g

GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller

MCU: STM32F411CEU6 
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V 
Input Voltage: 1S (&amplt4.35v)
Firmware: FLYWOOF411_5IN1_AIO 

Mounting:  25x25mm, M2

Onboard 4in1 ESC

MCU: EFM8BB21

Power supply: 1S LiPo/LiPo HVCurrent: 5A 

Firmware: BLHeli_S

Factory firmware: O_H_5_REV16_8.HEX

Default protocol: DSHOT 150/300/600

ELRS 2.4G RX (UART2)


ROBO 1002 19800KV

Configuration: 9N12P

Stator Diamter: 10mm

Stator Length: 2mm

Shaft Diameter: 1.5mm

Motor Dimension(Dia.xLen): Φ13.5x7.75mm

Weight(g): 2.5(5cm wire)

Idle current(5)@5V(A): 1.3

No.of Cells(Lipo): 1S

Max Continuous Power(W)3S: 44

Internal Resistance: 89mΩ

Max Current(3S): 11.8A

Max Efficiency Current: (2-4A)&ampgt84%

HDZERO WHOOP LITE VTX


Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package

HDZERO NANO LITE CAMERA

Size: 14x16x11mm

Weight: 1.5gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°

Includes

1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6&quot Deadcat Micro Quad w/ HDZero Whoop Lite &ampamp Nano Lite Cam - ELRS 2.4 GHz


4x 1608 -3 40mm 1.5mm shaft


2x TPU battery mount


1x hardware screws set

4x Prop ..

Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased cam

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz from WREKD Co.

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz

FLYWOO































Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the great capabilities of HDzero System.




















Check out our other pre-built quads, as well as other great products from Flywoo!










Features


Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. 
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.



Dead Cat Style


















The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.



















New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.

Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.

Ultra-light AIO with ELRS 2.4G RXThe drone's GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.
 





































HD Digital VTX System


The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator.



More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed. 

Specifications


Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit

Motor: ROBO 1002 19800KV

Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0

Propeller: 1608-3 Blade 40mm 1.5mm Shaft

Camera: Nano Lite Cam

Weight: 31g

GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller

MCU: STM32F411CEU6 
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V 
Input Voltage: 1S (&lt4.35v)
Firmware: FLYWOOF411_5IN1_AIO 

Mounting:  25x25mm, M2

Onboard 4in1 ESC

MCU: EFM8BB21

Power supply: 1S LiPo/LiPo HVCurrent: 5A 

Firmware: BLHeli_S

Factory firmware: O_H_5_REV16_8.HEX

Default protocol: DSHOT 150/300/600

ELRS 2.4G RX (UART2)


ROBO 1002 19800KV

Configuration: 9N12P

Stator Diamter: 10mm

Stator Length: 2mm

Shaft Diameter: 1.5mm

Motor Dimension(Dia.xLen): Φ13.5x7.75mm

Weight(g): 2.5(5cm wire)

Idle current(5)@5V(A): 1.3

No.of Cells(Lipo): 1S

Max Continuous Power(W)3S: 44

Internal Resistance: 89mΩ

Max Current(3S): 11.8A

Max Efficiency Current: (2-4A)&gt84%

HDZERO WHOOP LITE VTX


Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package

HDZERO NANO LITE CAMERA

Size: 14x16x11mm

Weight: 1.5gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°

Includes

1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite &amp Nano Lite Cam - ELRS 2.4 GHz


4x 1608 -3 40mm 1.5mm shaft


2x TPU battery mount


1x hardware screws set

4x Prop guards



Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w

Flywoo BNF Firefly DC16 Nano Baby Analog V2.0 1.6" Deadcat Micro Quad - 2.4GHz ELRS











Pre-Orders shipping ASAP! 
Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo.










Check out our other pre-built quads, as well as other great products from Flywoo!
Features


Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800Kv motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
Ultra-light GOKU Versatile F411 1S VTX AIO V2 with upgraded circuit board stability and a 250mw video transmitter, enabling an extended flight range.
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
Upgraded Flywoo 1S Nano camera V3 delivers clearer and better image quality.
New battery compartment design allows for easy replacement of batteries of different models.



Dead Cat Style


















The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.



















New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.

Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.

Ultra-light AIO with 250mw VTX


















The drone&#39s GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.



















Flywoo Nano Camera V3.0
Boasts a 4:3 aspect ratio, switchable NTSC and PAL formats, a 1/3&quot CMOS sensor, and global WDR, among other impressive specifications that render it an ideal choice for flying compact builds.

More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed. 

Specifications


Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit

Motor: ROBO 1002 19800KV

Electronic: GOKU Versatile F411 VTX 1S 5A AIO V2.0 w/ 250mw vtx

Propeller: 1608-3 Blade 40mm 1.5mm Shaft

Camera: Flywoo 1S Nano Camera V3

Weight: 26g

GOKU Versatile F411 VTX 1S 5A AIO V2.0 w/ 250mw VTX
Flight Controller

MCU: STM32F411CEU6 
GYRO: ICM42688
UARTS: 1/2
Soft serial port：1
I2C: SCL/SDA
BEC: 5V 
Input Voltage: 1S (&amplt4.35v)
Firmware: FLYWOOF411_5IN1_AIO 

Mounting:  25x25mm, M2

Onboard 4in1 ESC

MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A 
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600

Onboard 5.8g VTX

Output power: 25mw~250mw switchable
Frequency: 40CH
Frequency: 5.8GHz 5 bands 40 channels(include Race band) IRC ready

ROBO 1002 19800KV

Configuration: 9N12P

Stator Diamter: 10mm

Stator Length: 2mm

Shaft Diameter: 1.5mm

Motor Dimension(Dia.xLen): Φ13.5x7.75mm

Weight(g): 2.5(5cm wire)

Idle current(5)@5V(A): 1.3

No.of Cells(Lipo): 1S

Max Continuous Power(W)3S: 44

Internal Resistance: 89mΩ

Max Current(3S): 11.8A

Max Efficiency Current: (2-4A)&ampgt84%

Flywoo 1S Nano Camera V3

Model: Flywoo 1S Nano Camera V3
Image Sensor: 1/3&quot CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC and PAL(switchable)
MENU: Support
IMAGE: 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000 NTSC: 1/60~100,000
S/N Ratio: &ampgt52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm/F2.5
Min. illumination: 0.001Lux
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14x14mm
Wide Power Input: DC 3.7-18V
Work Temperature: -20°C~+60C
Work Humidity: 20%~80%
Weight: 2.1g

Includes

1x Flywoo BNF Firefly DC16 Nano Baby V2.0 1.6&quot 1S Deadcat Analog Micro Quad - ELRS 2.4 GHz


4x 1608 -3 40mm 1.5mm shaft


2x TPU battery mount


1x hardware screws set

4x Prop guards..

Pre-Orders shipping ASAP! Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canop

Flywoo BNF Firefly DC16 Nano Baby Analog V2.0 1.6" 1S Deadcat Micro Quad - ELRS 2.4 GHz from WREKD Co.

Flywoo BNF Firefly DC16 Nano Baby Analog V2.0 1.6

(PRE-ORDER) Flywoo BNF Firefly DC16 Nano Baby Analog V2.0 1.6" 1S Deadcat Micro Quad - ELRS 2.4 GHz











Pre-Orders shipping ASAP! 
Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo.










Check out our other pre-built quads, as well as other great products from Flywoo!
Features


Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800Kv motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
Ultra-light GOKU Versatile F411 1S VTX AIO V2 with upgraded circuit board stability and a 250mw video transmitter, enabling an extended flight range.
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
Upgraded Flywoo 1S Nano camera V3 delivers clearer and better image quality.
New battery compartment design allows for easy replacement of batteries of different models.



Dead Cat Style


















The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.



















New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.

Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.

Ultra-light AIO with 250mw VTX


















The drone's GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.



















Flywoo Nano Camera V3.0
Boasts a 4:3 aspect ratio, switchable NTSC and PAL formats, a 1/3" CMOS sensor, and global WDR, among other impressive specifications that render it an ideal choice for flying compact builds.

More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed. 

Specifications


Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit

Motor: ROBO 1002 19800KV

Electronic: GOKU Versatile F411 VTX 1S 5A AIO V2.0 w/ 250mw vtx

Propeller: 1608-3 Blade 40mm 1.5mm Shaft

Camera: Flywoo 1S Nano Camera V3

Weight: 26g

GOKU Versatile F411 VTX 1S 5A AIO V2.0 w/ 250mw VTX
Flight Controller

MCU: STM32F411CEU6 
GYRO: ICM42688
UARTS: 1/2
Soft serial port：1
I2C: SCL/SDA
BEC: 5V 
Input Voltage: 1S (&lt4.35v)
Firmware: FLYWOOF411_5IN1_AIO 

Mounting:  25x25mm, M2

Onboard 4in1 ESC

MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A 
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600

Onboard 5.8g VTX

Output power: 25mw~250mw switchable
Frequency: 40CH
Frequency: 5.8GHz 5 bands 40 channels(include Race band) IRC ready

ROBO 1002 19800KV

Configuration: 9N12P

Stator Diamter: 10mm

Stator Length: 2mm

Shaft Diameter: 1.5mm

Motor Dimension(Dia.xLen): Φ13.5x7.75mm

Weight(g): 2.5(5cm wire)

Idle current(5)@5V(A): 1.3

No.of Cells(Lipo): 1S

Max Continuous Power(W)3S: 44

Internal Resistance: 89mΩ

Max Current(3S): 11.8A

Max Efficiency Current: (2-4A)&gt84%

Flywoo 1S Nano Camera V3

Model: Flywoo 1S Nano Camera V3
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC and PAL(switchable)
MENU: Support
IMAGE: 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000 NTSC: 1/60~100,000
S/N Ratio: &gt52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm/F2.5
Min. illumination: 0.001Lux
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14x14mm
Wide Power Input: DC 3.7-18V
Work Temperature: -20°C~+60C
Work Humidity: 20%~80%
Weight: 2.1g

Includes

1x Flywoo BNF Firefly DC16 Nano Baby V2.0 1.6" 1S Deadcat Analog Micro Quad - ELRS 2.4 GHz


4x 1608 -3 40mm 1.5mm shaft


2x TPU battery mount


1x hardware screws set

4x Prop guards



(PRE-ORDER) Flywoo BNF Firefly DC16 Nano Baby Analog V2.0 1.6" 1S Dead

Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad - RunCam Link

Pre-Orders shipping ASAP! TBS version in stock and shipping same day! 
Firefly Nano Baby 20 is equipped with the most efficient micromotor and the top AIO flight control on the market. It will bring you an unprecedented flying experience.  The drone could do all the acrobatic motions smoothly, like diving and power looping.
Check out our other pre-built quads, as well as other great products from Flywoo!

Specifications

Weight: 44.44g (without battery)

FC &ampamp ESC : GOKU Versatile F405 2S 12A AIO

Frame: Firefly 2S Nnano Baby 20 VISTA Frame kit

Motors: Flywoo ROBO 1002 15500KV

Props: Gemfan 2015-2 blade 

Link &ampamp Camera : Naked RunCam Link Wasp Nano


GOKU Versatile F4 5-IN-1 1S AIO FC / VTX

SIZE: 30x30mm
Weight: 4.1g
Hole: 25.5x25.5-3mm
MCU: STM32F405
UARTS: 6
MOTOR: M1-M4 OUTPUT I2C: SCL/SDA
GYRO: ICM42688

Barometer: ICM42688

LED: 2x WS2812
Flash: 8M
BEC: 5V 2A
Firmware: FLYWOOF405S_AIO

Onboard 4in1 ESC

Built-in 1S/2S 12A BL_S 4in1 ESC
Support Oneshot125, Oneshot42, Multishot,
Dshot150, Dshot300, Dshot600
Input Voltage: 1-2S Lipo
Firmware: BLHELI_S
Firmware: Z_H_30_REV16.7

Flywoo ROBO 1002 15500Kv Motor


KV: 15500Kv


Input Voltage: 2S LiPo


Stator Dimensions: Φ10mm x 2mm


Shaft Diameter: Φ 1.5mm


Wire Dimensions: 30AWG x 40mm

Weight (with wires): 2.4g

Nano Wasp HD Camera

Dimensions: L18mmxW14mmxH18mm

LENS: FOV D:160° H:127° V:92°

Resolution: 720P@120fps(4:3)

Net Weight: 6g(With Cable)

Shutter: Rolling Shutter

Coaxial Cable: 80 mm

Image Sensor: 1/3&quot


Naked Link Air Unit

Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz

Transmitter Power: (EIRP) FCC/SRRC: &amplt30 dBm CE: &amplt14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km CE: 0.7 km
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)





Includes

1x Flywoo BNF Firefly 2S Nano Baby 20 HD 2&quot Quad w/ Naked RunCam Link &ampamp RunCam Wasp - Choose Receiver

2x set of 2015-2 props

1x Screw spare packs
2x Battery holder
4x Prop guards


Pre-Orders shipping ASAP! TBS version in stock and shipping same day! Firefly Nano Baby 20 is equipped with the most efficient micromotor and the top AIO flight control on the market. It will bring you an unprecedented flying experience.  The drone could do all the acrobatic motions smoothly, like diving and power loop

Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver from WREKD Co.

Flywoo BNF Firefly 2S Nano Baby 20 HD 2

Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver

Pre-Orders shipping ASAP! TBS version in stock and shipping same day! 
Firefly Nano Baby 20 is equipped with the most efficient micromotor and the top AIO flight control on the market. It will bring you an unprecedented flying experience.  The drone could do all the acrobatic motions smoothly, like diving and power looping.
Check out our other pre-built quads, as well as other great products from Flywoo!

Specifications

Weight: 44.44g (without battery)

FC &amp ESC : GOKU Versatile F405 2S 12A AIO

Frame: Firefly 2S Nnano Baby 20 VISTA Frame kit

Motors: Flywoo ROBO 1002 15500KV

Props: Gemfan 2015-2 blade 

Link &amp Camera : Naked RunCam Link Wasp Nano


GOKU Versatile F4 5-IN-1 1S AIO FC / VTX

SIZE: 30x30mm
Weight: 4.1g
Hole: 25.5x25.5-3mm
MCU: STM32F405
UARTS: 6
MOTOR: M1-M4 OUTPUT I2C: SCL/SDA
GYRO: ICM42688

Barometer: ICM42688

LED: 2x WS2812
Flash: 8M
BEC: 5V 2A
Firmware: FLYWOOF405S_AIO

Onboard 4in1 ESC

Built-in 1S/2S 12A BL_S 4in1 ESC
Support Oneshot125, Oneshot42, Multishot,
Dshot150, Dshot300, Dshot600
Input Voltage: 1-2S Lipo
Firmware: BLHELI_S
Firmware: Z_H_30_REV16.7

Flywoo ROBO 1002 15500Kv Motor


KV: 15500Kv


Input Voltage: 2S LiPo


Stator Dimensions: Φ10mm x 2mm


Shaft Diameter: Φ 1.5mm


Wire Dimensions: 30AWG x 40mm

Weight (with wires): 2.4g

Nano Wasp HD Camera

Dimensions: L18mmxW14mmxH18mm

LENS: FOV D:160° H:127° V:92°

Resolution: 720P@120fps(4:3)

Net Weight: 6g(With Cable)

Shutter: Rolling Shutter

Coaxial Cable: 80 mm

Image Sensor: 1/3"


Naked Link Air Unit

Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz

Transmitter Power: (EIRP) FCC/SRRC: &lt30 dBm CE: &lt14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km CE: 0.7 km
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)





Includes

1x Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link &amp RunCam Wasp - Choose Receiver

2x set of 2015-2 props

1x Screw spare packs
2x Battery holder
4x Prop guards


Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link & R

GEPRC

GEPRC BNF Mark5 HD 5" Quad - DJI O3, 2.4GHz ELRS

Pre-Orders shipping ASAP!
The HD VTX ushered in a new upgrade, and the brand new VTX of the DJI O3 air unit pushed the digital system to a new level. The GEPRC team is also upgrading and optimizing the overall performance based on MARK5. At the same time, it will be equipped with a DJI O3 air unit to design the new MARK5 O3 version.
The newly upgraded camera aluminum alloy side plate, 7075-T6 aluminum alloy is strong and durable. It can be fully adapted to DJI’s new O3 air unit camera, with a field of view (FOV) of 155°, and the recording specification can support up to 4K 60FPS. We also specially designed TPU fixing parts for the O3 VTX module and equipped it with an air inlet cooling port, which is conducive to adequate heat dissipation at the air unit. MARK5 O3 uses GEPRC’s latest SPAN F722-BT-HD V2 stack, with ICM 42688P gyroscope for smooth flight, redundant performance, and ports, and supports Bluetooth wireless connection for tuning. The SPAN BLHeli_32 50A ESC with GEPRC 2107.5 motor, and uses new Gemfan 5136 propellers, which has strong power. MARK5 O3 is shipped with two different camera mounts, which can be mounted with a full range of GoPro action cameras, as well as Naked GoPro 8/10, Insta 360 GO2 and Caddx Peanut, etc. to record beautiful moments for your flight.This time, MARK5 O3 will broaden your horizons, fly beyond what you have ever seen, and bring more possibilities for FPV creation.
Features

Upgraded lens aluminum alloy side plate, durable and more visual impact
Built-in Bluetooth, supports mobile phone wireless connection for parameter tuning
Developed specifically for freestyle with a squashed X arm design.
The HD version uses DJI’s new O3 VTX, clear image, stable signal, low-latency, long-distance, and supports up to 4K/60fps recording
SPAN G50A BLHeli_32 4in1 50A ESC with the latest GEPRC 2107.5 motor, with strong power, fast response speed, precise throttle control, and smooth flight experience
Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment
With an independent capacitor and buzzer cabin, the operating environment of the whole drone is extremely stable, no shaking, no jitter
Two kinds of 3D printing camera mounts are designed, which can be mounted with a full range of GoPro cameras, as well as Naked GoPro 8, Insta 360 GO2 and Caddx Peanut cameras. The shooting effect is stable and clear
Add coral orange and emerald green colors to the O3 version to add more colors to your flight
MARK5 O3 is optimized for freestyle, with a smoother flight experience


Specifications

Model: MARK5 HD O3 Quadcopter
Brand: GEPRC
Frame: GEP-MK5 O3
Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm plate: 5mm
FC system: SPAN F722-BT-HD V2
MCU: STM32F722
Gyro: 42688-P(SPI)
OSD: BetaFlight OSD w/AT7456E chip
ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC
VTX: DJI O3 Air Unit
Camera: DJI O3
Propeller: Gemfan 5136
Antenna: DJI O3 antenna
Motor: SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV（4S Version）
Weight: 404.9g (MARK5 HD O3 including 3D printed parts)
Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G
Recommended Battery: LiPo 4S 1300mAh-1800mAh (4S Version) / LiPo 6S 1050mAh-1550mAh(6S Version)

Includes

1x MARK5 HD O3 Quadcopter
4x Gemfan 5136 propellers (pair)
1x Battery strap M15x250mm
2x Battery strap M20x220mm
2x Battery Silicone Pads
1x 3D printed parts
1x Action cam mount holder
1x Set of screws
1x Set of screwdrivers
1x Antenna fixed tube


Pre-Orders shipping ASAP! The HD VTX ushered in a new upgrade, and the brand new VTX of the DJI O3 air unit pushed the digital system to a new level. The GEPRC team is also upgrading and optimizing the overall performance based on MARK5. At the same time, it will be equipped with a DJI O3 air unit to design the new MAR

(PRE-ORDER) GEPRC BNF Mark5 HD 6S 5" Quad w/ DJI O3 Air Unit - ELRS 2.4GHz

(PRE-ORDER) GEPRC BNF Mark5 HD 6S 5" Quad w/ DJI O3 Air Unit - ELRS 2.

EMAX BNF Babyhawk II Analog 3.5" Quadcopter

  LATEST PRODUCTION COMES EQUIPPED WITH RUNCAM RACER NANO 2, NOT RACER 5 AS PICTURED. LATEST PRODUCTION COMES EQUIPPED WITH RUNCAM RACER NANO 2, NOT RACER 5 AS PICTURED.

Babyhawk II - Analog - 3.5

EMAX BNF BabyHawk II HD 3.5" Quadcopter

EMAX BabyHawk II HD Freestyle RTF w/ Caddx Nebula Pro Digital HD System

Following the latest advancements in FPV technology, the engineering team at EMAX challenged themselves to design a new drone that will meet aerodynamic properties and performance for an HD system, while still retaining a weight under 250g - the resu

BABYHAWK II HD REQUIRES DJI DIGITAL HD FPV SYSTEM GOGGLES FOR VIDEO TRANSMISSION, BABYHAWK II HD IS NOT COMPATIBLE WITH STANDARD 5.8GHZ ANALOG VIDEO RECEIVER. FOR ANALOG PLEASE SEE BABYHAWK II ANALOG VARIANT.   Optional 3D Printable Files: GoPro Mount GoPro Seat Insta360 Go Mount  Polar Camera Mount Standoffs  

Babyhawk II HD - 3.5

Emax Babyhawk II HD Digital BNF reinventing FPV! Now available with the Nebula Pro camera! Check out our entire Emax Babyhawk II Collection, all our Digital BNF PNP RTFs and the rest of our Emax Products! For the ultimate lightweight HD footage add on the Insta360 GO 2 and 3D Printed mount! Recommended Battery: 850mAh 

Emax Babyhawk II HD Digital BNF w Caddx Vista + Nebula Pro Camera - Choose Receiver

Emax BabyHawk HD D8 Compatible Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesD8 Compatible BNFFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone FrSky D8 shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone FrSky D8 - RMRC

Babyhawk II HD 3.5&quot Micro Polar DJI FPV Drone FrSky D8

Emax BabyHawk HD PNP Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone PNP shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone PNP - RMRC

Babyhawk II HD 3.5&quot Micro DJI CADDX Polar Vista FPV Drone PNP

The Babyhawk II HD RTF w/ Caddx Polar Vista is a superior and powerful drone that offers great performance and amazing HD video quality all in a 250g aircraft!  

The Babyhawk II HD RTF w/ Caddx Polar Vista is a superior and powerful drone that offers great performance and amazing HD video quality all in a 250g aircraft!
Following the latest advancements in FPV technology, the engineering team at EMAX challen

EMAX BabyHawk II HD 3.5" Freestyle RTF w/ Caddx Polar Vista

EMAX BabyHawk II HD 3.5&quot Freestyle RTF w/ Caddx Polar Vista

Emax BabyHawk HD TBS Crossfire Nano Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesTBS Crossfire Compatible BNFFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone TBS Crossfire Nano shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone TBS Crossfire Nano - RMRC

Babyhawk II HD 3.5&quot Micro DJI FPV Drone TBS Crossfire Nano

EMAX RTF Tinyhawk II Freestyle Ready To Fly Kit - Googles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

Check out the brand new RTF from Emax! Introducing the brand new RE-INVENTED Tinyhawk II Freestyle COMBO!Includes Controller &amp; Goggles!!! See all parts for Tinyhawk II Freestyle! See the rest of our EMAX collection!  Frame: Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material

Emax Tinyhawk II Freestyle RTF Kit - With Controller & Goggles

EMAX TinyHawk II Freestyle Micro Brushless FPV Drone (RTF Bundle)

Following the groundbreaking performance of the predecessor, comes the newly re-invented Tinyhawk II Freestyle, the perfect beginner outdoor FPV quad!
By re-designing the frame to accept a higher quality camera, the FPV experience is enhanced, allow

EMAX TinyHawk II Freestyle FPV Drone RTF Kit with Goggles and Controller

  * Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber * Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" * All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHe

Tinyhawk II Freestyle RTF Kit - With Controller & Goggles

EMAX BNF TinyHawk II Freestyle Quadcopter

Tinyhawk II Freestyle - FPV Drone F4 5A 7000KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 2S - FrSky BNF

Tinyhawk II Freestyle BNF

EMAX TinyHawk II Freestyle 2S Micro Brushless FPV Drone (FrSky BNF)


Following the groundbreaking performance of the predecessor, comes the newly re-invented Tinyhawk II Freestyle, the perfect beginner outdoor FPV quad!
By re-designing the frame to accept a higher quality camera, the FPV experience is enhanced, all

Emax USA



* Frame
Wheelbase: 115mm
Dry Weight: 49g
All Up Weight: 79g with 2x 450mAh 1S battery
Frame Material: Carbon Fiber


* Motors
Stator Size: 1103
Kv: 7000kv
Propeller Mount: T-mount, 1.5mm shaft
Propeller: Avan Rush 2.5&quot


* All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode**)
Battery Connector: JST-PH2.0 Duo


* FPV System
Ham radio license required for use in North America.
VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)*
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3&quot 700TVL CMOS
Smart Audio Connected


* Includes
1x Tinyhawk II Freestyle BNF
2x EMAX 450mAh 1S HV Battery
1x 1S USB LiPo Charger
1x Screwdriver + Hardware Kit

*Please note that even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Tinyhawk II Freestyle is set to stay at 25mW until you arm the motors.
 
** Be advised that this model is NOT compatible with the latest 2019+ FrSky ACCESS protocol transmitters without the use of FrSky&#39s external XJT module for ACCESS transmitters for D8 mode capability.
 
RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE

* Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber * Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" * All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli

Tinyhawk II Freestyle BNF from WREKD Co.

Following the groundbreaking performance of the predecessor, comes the newly re-invented Tinyhawk 2 Freestyle, the perfect beginner outdoor quadcopter.By re-designing the frame to accept a higher quality camera (Runcam Nano),The FPV experience is enhanced, allowing newfound clarity when navigating the enviroment.Paired

iFlight BNF Nazgul Evoque F5X HD 5" Squashed X Quadcopter

Our best pre-built drone just got better! Another breakthrough in FPV visuals from DJI with our upgraded frame and electronics. A new standard of Bind-And-Fly drones that are simple to get started with but the durability and performance for enthusiasts. Welcome to the iFlight experience!  Check out all our Digital BNF/

iFlight Nazgul Evoque F5X V2 6S Squashed-X Geometry w/ DJI O3 HD Camera System - Choose Version

iFlight BNF Nazgul Evoque F5D HD 5" Deadcat Quadcopter

iFlight Nazgul Evoque F5D V2 6S Deadcat Geometry w/ DJI O3 HD Camera System - Choose Version

Hyperlite

Hyperlite BNF Freerange HD 5" Freestyle Quadcopter

Introducing the Hyperlite Freerange 5'' LR Freestyle frame! This frame is a culmination of months of extensive testing by our team and our knowledge gained from years of racing. The main design follows the basic layout cues and engineering that have made Hyperlite frames one of the most widely used in the hobby.  As wi

Hyperlite Freerange 5

Introducing the Hyperlite Freerange 5'' LR Freestyle frame AirX Edition! This frame is made in collaboration with our friends at AirX Machina in two beautiful new colors. First is AirX's red anodized mid plate with our Seal Grey TPU accessories. And we also now have available a Gun Metal anodized mid plate with our Pyr

DarwinFPV BNF TinyApe Freestyle 2.5" Quadcopter

DarwinFPV Tiny Ape Freestyle 2.5" Quadcopter - ExpressLRS

#html-body [data-pb-style=XMBEYS0]{display:none}#html-body [data-pb-style=A1RD8JT],#html-body [data-pb-style=A5ATDK7],#html-body [data-pb-style=CE8K33F],#html-body [data-pb-style=DOXJV4H],#html-body [data-pb-style=F0WB0NN],#html-body [data-pb-style=F

DarwinFPV Tiny Ape Freestyle 2.5&quot Quadcopter - ExpressLRS

Tiny Ape Freestyle is the first 2.5'' drone for Darwinfpv. In order to meet the needs of more friends and we have made multiple attempts. It comes with the Darwin ELRS2.0 F411 15A Bluejay AIO and the VTX006 which has 25-600mW output power. NOTE: Runcam Thumb Camera NOT Included Check out all our Analog BNF Drones and t

DarwinFPV TinyApe Freestyle 2.5

iFlight BNF TITAN XL5 HD 5" Quadcopter

The TITAN XL5 w/ DJI Air Unit BNF features the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. Equipped with iFlight's latest SucceX-D F7 (50A 4-in-1 ESC) Stack and the popular XING motors. Everything you need  just bind-and-fly! Check out the Variable GoPro TPU Mount for this frame. After ou

iFLIGHT TITAN XL5 HD W/Air Unit/DJI Camera & GPS - Choose Power & RX

The Titan XL5 HD BNF is a sturdy 5" freestyle quad equipped with quality equipment from iFlight, along with an HD FPV system for crystal clear video!

#html-body [data-pb-style=LRPPNP0]{display:none}#html-body [data-pb-style=EDE3MSG],#html-body [data-pb-style=IVBT0BY]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:n