FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

EMAX

EMAX RTF EZ Pilot Pro Kit - Goggles, Radio Transmitter, 75mm Whoop

Consistent improvement is the goal of our team at EMAX but this comes at a cost. With more upgrades to our micro indoor racing drones which cater to more experienced pilots, we further alienate potential budding pilots looking to explore the world of FPV. This is why our engineers have come up with a solution through t

EMAX EZ Pilot Pro Indoor Racing Drone - RTF

Emax USA

 

 
 
 
Drone Specs:

Wheelbase: 75mm
Dry weight: 32.5g
AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter
Motor: 08025 II KV15000
RX Protocol: FrSky D8 SPI

Includes:

1x EZ Pilot Pro Drone
1x E8 Transmitter
1x Transporter 2 Non-DVR Version
1x Monitor Mounting Hardware
1x EMAX 1S 450 mAh LiPo battery
1x 6-Port 1S USB LiPo Battery Charger
1x USB Cable for Charging + Programming
1x Set Spare Turtlemode Propellers
1x Set Spare Hardware

        Drone Specs: Wheelbase: 75mm Dry weight: 32.5g AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter Motor: 08025 II KV15000 RX Protocol: FrSky D8 SPI Includes: 1x EZ Pilot Pro Drone 1x E8 Transmitter 1x Transporter 2 Non-DVR Version 1x Monitor Mounting Hardware 1x EMAX 1S 450 mAh LiPo batt

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles from WREKD Co.

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles

The EZ Pilot Pro drone features an improved frame, 200mw VTX capabilities, and a solid pin PH2.0 connector over the original.

EMAX EZ Pilot Pro Beginner FPV Drone RTF Kit w/ Transporter 2 Goggles + E8 Transmitter

Pre-Built Quad Kit Type

Pre-Built Quads and Kits

Quad Frame Size

Quad Type

EMAX BNF TinyHawk III 76mm Whoop

        Size class: 76mm Weight (without battery): 32 grams Motors: TH0802 II 15000kv Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC Receiver:  SPI / FrSky D8/D16 Camera: RunCam Nano 4 Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.

Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF)

EMAX Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF)

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

EMAX Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF) - RMRC

Self-improvement is a core trait for the engineers at EMAX, which is why when approached about a new successor to the Tinyhawk series, they designed the Tinyhawk III to build upon all the strengths of previous generations while improving any shortcomings. First is a drastically redesigned body frame centered around dur

Emax Tinyhawk 3 FPV Racing Drone - FrSky Bind N Fly (BNF)

Introducing... the EMAX TinyHawk III BNF Quadcopter!! This BNF features the RunCam Nano 4 Camera.

EMAX TinyHawk III FPV Racing Drone BNF

EMAX RTF TinyHawk III Ready to Fly Kit w/ Goggles, Radio Transmitter, Case and 76mm Racing Whoop Drone

Introducing... the&nbspEMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

Introducing... the EMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

EMAX TinyHawk III FPV Racing Drone RTF Bundle

      Size class: 76mm Weight (without battery): 32 grams Motors: TH0802 II 15000kv Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC Receiver:  SPI / FrSky D8/D16 Camera: RunCam Nano 4 Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.    

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggles

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggl - RMRC

 

 
 
Size class: 76mm
Weight (without battery): 32 grams
Motors: TH0802 II 15000kv
Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC
Receiver:  SPI / FrSky D8/D16
Camera: RunCam Nano 4
Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.
 
 

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles from WREKD Co.

Emax Tinyhawk 3 FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

EMAX BNF Tinyhawk II Racing Quadcopter









 
 Frame
Wheelbase: 90mm
Dry Weight: 47.5g
All Up Weight: 73g with 2x 450mAh 1S battery
Frame Material: Polypropylene &ampamp Carbon Fiber
 

 Motors
Stator Size: 1103
Kv: 7500kv
Propeller Mount: T-mount
Propeller: Avan Blur 2&quot/span&ampgt
 

 All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode**)
Battery Connector: JST-PH2.0 Duo
 

 FPV System
Ham radio license required for use in North America.
VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)*
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3&quot 700TVL CMOS
Smart Audio Connected
 

 Includes
1x Tinyhawk II Race BNF
2x EMAX 450mAh 1S HV Battery
1x 1S USB LiPo Charger
1x Screwdriver + Hardware Kit
 
*Please note that even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Race is set to stay at 25mW until you arm the motors.
** Be advised that this model is NOT compatible with the latest 2019+ FrSky ACCESS protocol transmitters without the use of FrSky&#39s external XJT module for ACCESS transmitters for D8 mode capability.
 
RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE

   Frame Wheelbase: 90mm Dry Weight: 47.5g All Up Weight: 73g with 2x 450mAh 1S battery Frame Material: Polypropylene &amp; Carbon Fiber    Motors Stator Size: 1103 Kv: 7500kv Propeller Mount: T-mount Propeller: Avan Blur 2"/span&gt;    All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC

Tinyhawk II Race BNF from WREKD Co.

Tinyhawk II Race BNF

Emax took the already amazing Tinyhawk and made it the perfect micro indoor and outdoor racing drone by adding industry standard Runcam Nano 2 camera on an adjustable mount and higher output VTX up to 200mW with more filtering.Find parts and accessories in our TinyHawk 2 Collection! Frame: Wheelbase: 75mm Dry Weight: 3

EMAX Tinyhawk 2 racing Drone BNF With Runcam Nano2

Tinyhawk II Race FPV Racing Drone F4 5A 7500KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 2S - BNF

EMAX has gone back to make what was already an amazing micro quadcopter even better, with a RunCam Nano 2 FPV Camera with adjustable tilt, higher power VTX, LEDs, and more powerful motors.

EMAX TinyHawk 2 Micro Brushless FPV Drone w/ RunCam Nano 2 (BNF)

Besides being a beginner-friendly, fun and micro-sized drone, EMAX's Tinyhawk II Race is a more performance-oriented outdoor 2S quadcopter. 

EMAX Tinyhawk II Race Micro Brushless FPV Drone w/ RunCam Nano 2 

EMAX RTF TinyHawk II  Ready to Fly Kit - Googles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

Great beginner RTF kit by EMAX! Comes with everything you need to rip! See our Tinyhawk II collection! Check out all our BNF-PNP-RTF quads and Emax collection!Recommended Batteries : 1S: GNB 1S 450MAH HIGH VOLTAGE 80C PH 2.0 GNB 1S 450MAH 80C PH 2.0. AULINE 450MAH HV 3.8V 1S LIPO 80C PH2.0 - 4PCS 2S: GNB 300MAH 2S 7.6V

EMAX TINYHAWK II RACING DRONE RTF WITH RUNCAM NANO2 RTF

Tinyhawk II 2 Indoor FPV Racing Drone F4 5A 16000KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 1S-2S - RTF

Tinyhawk II RTF Kit - With Controller & Goggles

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners and pros alike.

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners

EMAX TinyHawk II Micro Brushless FPV Drone (RTF Bundle)

Our TinyHawk II Freestyle RTF Bundle is the best way to get into FPV! The quality products in this bundle have been handpicked and pre-bound together by our team to give you the best micro experience.

EMAX TinyHawk II Freestyle 2S Micro FPV RTF Bundle w/ BETAFPV LiteRadio 2 + EMAX Transporter Goggles

EMAX RTF EZ Pilot Beginner Indoor Racing Quadcopter

Just in time for the holidays, the EMAX EZ Pilot is the best way to start flying drones! The EZ Pilot has a built-in FPV camera that allows the user to fly first-person through the FPV goggles so you can feel like you are flying in the air! 

EMAX EZ Pilot - Beginner FPV Drone RTF Kit w/ FPV Goggles + Radio

 


 
     
 
 
Features:
- Real-time Hobby-grade First-Person-View (FPV) Video Transmission System
- Gyroscopic Self-leveling with 3-modes from beginner to advanced
- Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode.
- EZ One Stick Control that mixes yaw and roll into one stick for simple, intuitive flight feel
- On-board FPV camera to experience flight from inside the aircraft
- 4 Minute flight time with included 450mah 1S battery
- Ergonomic Radio Controller and Comfort Fit FPV Virtual Reality Goggle included
 
 
 
 
 
Includes:
- 1x EZ-Pilot Indoor Drone
- 1x EZ-Pilot Controller (Proprietary Protocol, see Compatibility)
- 1x Transporter 5.8G FPV Goggles with 1x linear antenna included + second SMA port for upgrade/expansion
- 1x Transporter USB-rechargable 18650 Battery Pack
- 1x 450mah 1S 4.35V HV LiPo Battery
- 1x USB-powered 1S Charger
- 2x CW 2x CCW EZ Pilot Replacement Props
- 1x Micro USB Cable
- 1x EZ-Pilot Decal Customization Kit
 
 
 RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE
UPC: 691036971855

        Features: - Real-time Hobby-grade First-Person-View (FPV) Video Transmission System - Gyroscopic Self-leveling with 3-modes from beginner to advanced - Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode. - EZ One Stick Control that mixes yaw and roll into o

EZ Pilot Beginner Indoor Racing Drone - With Controller & Goggle RTF from WREKD Co.

EZ Pilot Beginner Indoor Racing Drone - With Controller & Goggle RTF

EZ Pilot Beginner Indoor Racing Drone - RTF (PRE-ORDER)

EMAX EZ Pilot Beginner Indoor Racing Drone - RTF Check out all our Emax Products and the rest of our BNF/PNP/RTFs!         Features: - Real-time Hobby-grade First-Person-View (FPV) Video Transmission System - Gyroscopic Self-leveling with 3-modes from beginner to advanced - Smart Height Assist altitude control in begin

EMAX EZ Pilot Beginner Indoor Racing Drone - RTF

Happymodel

Happymodel BNF Mobula 6 V2 Micro Whoop

RaceDayQuads

All product containing lithium batteries must be shipped by a ground shipping method. Please be aware Betaflight 4.3.1 firmware has a bug, Please do not flash version 4.3.1.
This is the V2 version of the Mobula 6 HD. This version features an ICM20689 Gyro as well as an OpenVTX 400mW VTX.
The Highly sought after Mobula6 now comes in HD! Record all your sessions in HD with the onboard RunCam split 3 Lite.We recommend RDQ 1S 300mAh LiPos for this whoop! Be sure to check out all our pre-built quads, and all our Happymodel products! 

Features


AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless HD whoop only 27g
Come with Runcam Split3-lite 1080P HD DVR
Smooth and agile
Compatible for 1S Lipo/LIHV
Camera Angle adjustable

Specifications

Wheelbase: 65mm
Size: 80x80x40mm
Weight: 27g
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
Internal SPI DSM2/DSMX version(Compatible with SPEKTRUM DSM2/DSMX protocol radio transmitter)
External TBS CRSF NANO version(Compatible with TBS Transmitters)

 Motors

Model: EX0802 19000KV
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
Weight(g): 1.7g
No.of Cells(Lipo): 1S only

Flight Controller 

(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
(DSM2/X SPI RX version) CRAZYBEEX DXS  DSM2/X version firmware target: CrazybeeF4DXS
(External TBS CRSF NANO RX version) CRAZYBEE F4 Lite Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G 400mW VTX
Built-in SPI Frsky/Flysky/DSMX receiver
Built-in 5V 1A BEC
Built-in voltage detection

ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600

VTX

Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band Smart audio ready

Runcam Split3 Lite

Model: RunCam Split3-Lite
Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps
Video File Format: MOV
Image Resolution:2 MP
TV Mode: NTSC (720*480)/PAL (720*576) Switchable
Interface: JST 1.25mm / UART and SH 1.0mm
Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
Hole Distance of Installation: 25.5*25.5mm
PCB Size: 29*29mm
Lens Module Size: 14*14mm
Lens Specs: M9
Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)
Working Current: 450mA @5V

Includes

1x Happy Model BNF Mobula 6 HD 1S Whoop Quad - Choose Your RX


All product containing lithium batteries must be shipped by a ground shipping method. Please be aware Betaflight 4.3.1 firmware has a bug, Please do not flash version 4.3.1. This is the V2 version of the Mobula 6 HD. This version features an ICM20689 Gyro as well as an OpenVTX 400mW VTX. The Highly sought after Mobula6

HappyModel BNF Mobula6 HD V2 1S Analog Whoop Quad - Choose Your RX

EMAX RTF Tinyhawk III Plus Analog Whoop - 2.4GHz ELRS

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

1x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV! The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision. This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2 EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware. Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications TINYHAWK 3 PLUS ANALOG Wheelbase: 76mm Weight: 32.5g Motor: TH0802 II - 15000KV Propellers: Avia Tinyhawk Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G) Camera: Runcam Nano VTX: 32Bit 40Ch 0/25mW/100mW/400mW Battery: 1S 650mAh E8 TRANSMITTER (ELRS-2.4G) Dimensions: LxWxH=150x140x45mm Weight: 260g Channels: 8 Protocol: ELRS 2.4G Band: 2.4gHz（2400-2483.5MHz） Power Levels: 10mW/25mW/50mW/100mW Battery: 800mAh 18650 Charging: USB-C 1A Recommended Operating Voltage: 3.7-4.2V Input: Type-C, 3.5mm TRANSPORTER 2 ANALOG GOGGLES Dimensions: LxWxH=155x100x90mm Weight: 398g Screen Resolution: 480x800 Screen Size: 4.3 Inch Battery: 1300mAh Integrated Operating Voltage: 3.7V-4.2V Band: 5.8GHz（5658-5945MHz） Charging: USB-C 1A Recommended DVR: 32GB Micro SD Recommended Modes: VGA/D1 Includes 1x Tinyhawk 3 Plus Analog BNF 1x EMAX E8 Transmitter (ELRS-2.4G) 1x EMAX Transporter 2 Analog Goggles 2x EMAX 1S HV 650mAh Battery 1x Hardware Kit 1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW) 1x USB Battery Charger 1x Monitor to Transmitter Mounting Kit

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, and Drone

EMAX RTF Tinyhawk III Plus Whoop Ready to Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

The EMAX Tinyhawk III Plus Analog Bundle is your gateway to an exhilarating FPV drone experience.&nbsp

The EMAX Tinyhawk III Plus Analog Bundle is your gateway to an exhilarating FPV drone experience. 

EMAX TinyHawk III Plus RTF Bundle - Analog w/ Goggles + Radio

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


All products containing batteries must be shipped by a ground shipping method. The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the idea

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

Emax

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers&#39 feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone from WREKD Co.

EMAX BNF Tinyhawk III Plus Analog Whoop - 2.4GHz ELRS

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers&#39 feedback and made significant enhancements, including the incorporation of ExpressLRS technology and an optional variant with HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
Check out all our pre-built quads, and all our EMAX gear!



Specifications

Wheelbase: 76mm
Weight: 32.5g
Motor: TH0802 II - 15000KV
Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano
VTX: 32Bit 40Ch 0/25mW/100mW/400mW
Battery: 1S 650mAh

Includes

1x Tinyhawk 3 Plus Analog BNF
1x EMAX 1S HV 650mAh Battery
1x Hardware Kit
1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)
1x USB Battery Charger


All products containing batteries must be shipped by a ground shipping method. The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and an optional variant

EMAX BNF Tinyhawk III Plus Whoop 1-2S Analog Racing Drone w/ RunCam Nano  - ELRS 2.4 GHz from WREKD Co.

EMAX BNF Tinyhawk III Plus Whoop 1-2S Analog Racing Drone w/ RunCam Nano  - ELRS 2.4 GHz

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and an optional variant with HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
Check out all our pre-built quads, and all our EMAX gear!



Specifications

Wheelbase: 76mm
Weight: 32.5g
Motor: TH0802 II - 15000KV
Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano
VTX: 32Bit 40Ch 0/25mW/100mW/400mW
Battery: 1S 650mAh

Includes

1x Tinyhawk 3 Plus Analog BNF
1x EMAX 1S HV 650mAh Battery
1x Hardware Kit
1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)
1x USB Battery Charger


The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV! The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision. Check out all our pre-built quads, and all our EMAX gear! Specifications Wheelbase: 76mm Weight: 32.5g Motor: TH0802 II - 15000KV Propellers: Avia Tinyhawk Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G) Camera: Runcam Nano VTX: 32Bit 40Ch 0/25mW/100mW/400mW Battery: 1S 650mAh Includes 1x Tinyhawk 3 Plus Analog BNF 1x EMAX 1S HV 650mAh Battery 1x Hardware Kit 1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW) 1x USB Battery Charger

EMAX BNF Tinyhawk III Plus Whoop 1-2S Analog Racing Drone w/ RunCam Nano - ELRS 2.4 GHz

EMAX Tinyhawk III Plus HDZero Bind-N-Fly BNF ELRS

EMAX Tinyhawk III Plus Analog Bind-N-Fly BNF ELRS - RMRC

EMAX Tinyhawk III Plus Analog Bind-N-Fly BNF ELRS

Sub250

Sub250 BNF Whoopfly16 1.6" HD Ultralight Whoop - HDzero, 2.4GHz ELRS

The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable drone delivers a strong and effortless user experience. Whoopfly16 can adapt to mainstream 1S image transmission (analog / HD Zero / AVATAR). The analog video transmission will be equipped with an Ant eco lens from Caddx, and the elevation angle of the lens can be adjusted upwards by 30 degrees. With the latest 1s 530mah battery, the battery life can reach 4 minutes and 30 seconds.
Make sure to check out all of our HDzero BNF quads as well as the rest of our Sub250 selection!

Features

Inverted whoop FPV drone makes the paddle and motor more efficient.

With the new 1S 530mah LiHV battery

Highly integrated flight control, integrated flight control, ESC, remote control receiver, and video transmission.
One-piece injection molded protective ring frame, higher strength, and less deformation of the frame during aggressive flight.
The protection of the circle is enhanced, and novices and experienced pilots both are safe.
There are many options for image transmission, you can choose HD Zero /AVATAR and analog image transmission
Use 1002 21000kv motor, abundant power &quotalways ready to overtake&quot

Indoor flight is safer with a small wheelbase and a protective ring, and it is handier to fly with a reasonable combination.
Suitable for beginner outdoor advanced racing practice








Specification 

HD Zero Version

Product name: Whoopfly16

Frame: WF16

Wheelbase size: 75mm

Flight control system: Redfox A1

MCU: STMF411

IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip

ESC: Redfox A1 4IN1 5A ESC

VTX: Hd Zero whoop lite

Lens: Hd Zero nano lite camera

Propeller: Gemfan 1608-3

Antenna: 5.8g copper tube antenna 70mm

weight: 39.2g
Receiver: ELRS (SPI) 

Includes

1x Sub250 Whoopfly16 BNF 1.6&quot HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)
4x M1.4 cross screws

1x Blue frame protection cotton

1x Red frame protective cotton

1x L-shaped inner hexagon screw blade

1x Cross screw blade

2x 3M double-sided tape

4x 1608-3 propellers


The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable dr

Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI) from WREKD Co.

Sub250 Whoopfly16 BNF 1.6

Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)

The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable drone delivers a strong and effortless user experience. Whoopfly16 can adapt to mainstream 1S image transmission (analog / HD Zero / AVATAR). The analog video transmission will be equipped with an Ant eco lens from Caddx, and the elevation angle of the lens can be adjusted upwards by 30 degrees. With the latest 1s 530mah battery, the battery life can reach 4 minutes and 30 seconds.


Features

Inverted whoop FPV drone makes the paddle and motor more efficient.

With the new 1S 530mah LiHV battery

Highly integrated flight control, integrated flight control, ESC, remote control receiver, and video transmission.
One-piece injection molded protective ring frame, higher strength, and less deformation of the frame during aggressive flight.
The protection of the circle is enhanced, and novices and experienced pilots both are safe.
There are many options for image transmission, you can choose HD Zero /AVATAR and analog image transmission
Use 1002 21000kv motor, abundant power "always ready to overtake"

Indoor flight is safer with a small wheelbase and a protective ring, and it is handier to fly with a reasonable combination.
Suitable for beginner outdoor advanced racing practice








Specification 

HD Zero Version

Product name: Whoopfly16

Frame: WF16

Wheelbase size: 75mm

Flight control system: Redfox A1

MCU: STMF411

IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip

ESC: Redfox A1 4IN1 5A ESC

VTX: Hd Zero whoop lite

Lens: Hd Zero nano lite camera

Propeller: Gemfan 1608-3

Antenna: 5.8g copper tube antenna 70mm

weight: 39.2g
Receiver: ELRS (SPI) 

Includes

1x Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)
4x M1.4 cross screws

1x Blue frame protection cotton

1x Red frame protective cotton

1x L-shaped inner hexagon screw blade

1x Cross screw blade

2x 3M double-sided tape

4x 1608-3 propellers


SUB250

Pre-Orders shipping ASAP!
The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable drone delivers a strong and effortless user experience. Whoopfly16 can adapt to mainstream 1S image transmission (analog / HD Zero / AVATAR). The analog video transmission will be equipped with an Ant eco lens from Caddx, and the elevation angle of the lens can be adjusted upwards by 30 degrees. With the latest 1s 530mah battery, the battery life can reach 4 minutes and 30 seconds.
Make sure to check out all of our HDzero BNF quads as well as the rest of our Sub250 selection!

Features

Inverted whoop FPV drone makes the paddle and motor more efficient.

With the new 1S 530mah LiHV battery

Highly integrated flight control, integrated flight control, ESC, remote control receiver, and video transmission.
One-piece injection molded protective ring frame, higher strength, and less deformation of the frame during aggressive flight.
The protection of the circle is enhanced, and novices and experienced pilots both are safe.
There are many options for image transmission, you can choose HD Zero /AVATAR and analog image transmission
Use 1002 21000kv motor, abundant power "always ready to overtake"

Indoor flight is safer with a small wheelbase and a protective ring, and it is handier to fly with a reasonable combination.
Suitable for beginner outdoor advanced racing practice








Specification 

HD Zero Version

Product name: Whoopfly16

Frame: WF16

Wheelbase size: 75mm

Flight control system: Redfox A1

MCU: STMF411

IMU: ICM42688-P
OSD: BetaFlight OSD w/AT7456E chip

ESC: Redfox A1 4IN1 5A ESC

VTX: Hd Zero whoop lite

Lens: Hd Zero nano lite camera

Propeller: Gemfan 1608-3

Antenna: 5.8g copper tube antenna 70mm

weight: 39.2g
Receiver: ELRS (SPI) 

Includes

1x Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)
4x M1.4 cross screws

1x Blue frame protection cotton

1x Red frame protective cotton

1x L-shaped inner hexagon screw blade

1x Cross screw blade

2x 3M double-sided tape

4x 1608-3 propellers


Pre-Orders shipping ASAP! The Sub250 Whoopfly16 BNF is an ultra-light 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 10

(PRE-ORDER) Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop - ELRS 2.4GHz (SPI)

(PRE-ORDER) Sub250 Whoopfly16 BNF 1.6" HD Ultra-Light HDzero 1S Whoop 

Flywoo

Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1.6" Micro Quad - HDZero, 2.4GHz ELRS












The Firefly 1S Nano Baby V2 is a micro-drone with improved flight time, power and design compared to its predecessor.  Power has increased by 30%, with flexible flight, exceptional maneuverability, and higher speeds.  A new canopy for camera protection and a bottom plate for sturdiness are integrated. Additionally, this model includes the GOKU F411 ELRS 1S AIO V2 with ELRS 2.4G receiver (UART 2) for a lightweight design with optimal performance. This version utilizes the elite capabilities of the HDZero HD digital VTX system. The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator. 











Check out our other pre-built quads, as well as other great products from Flywoo!

Features:

Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 23,500KV motor and 1609 4-bladed 40mm propellers, delivers a 30% increase in power, flexible flight, and impressive speeds - perfect for racing competitions.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. 
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.



Specifications

Motor:  ROBO 1002 23,500KV
Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0


Props:  1609 - 4 blade 40mm 1.5mm Shaft

HD Digital VTX System:  HDZero Whoop Lite Bundle

Receiver:  ExpressLRS 2.4GHz
Weight:  31g
Flight Time:  Explorer 1S 450mAh HV V2: 4m - Explorer 1s 750mAh HV V2: 6m (approximate)

Speed:  70km/h (approximate)


GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller

MCU: STM32F411CEU6 
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V 
Input Voltage: 1S (&amplt4.35v)
Firmware: FLYWOOF411_5IN1_AIO 

Mounting:  25x25mm, M2


Onboard 4in1 ESC

MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A 
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600
ELRS 2.4G RX (UART2)


Flywoo ROBO 1002 23500KV Fpv Motor:



Configuration: 9N12P
Stator Diameter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm

Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.5
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 52
Internal Resistance: 75mΩ
Max Current(3S): 14A

Max Efficiency Current: (2-4A)&ampgt84%

HDZero Whoop LITE VTX


Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package

HDZero Nano LITE Camera

Size: 14x16x11mm

Weight: 1.5gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°



Includes 

1x Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6&quot Micro Quad w/ HDZero Whoop Lite &ampamp Nano Lite Cam - ELRS 2.4 GHz
4x 1609 - 4 40mm 1.5mm shaft

2x TPU Battery Mount

1x Hardware Screw Set
4x Prop guards


The Firefly 1S Nano Baby V2 is a micro-drone with improved flight time, power and design compared to its predecessor.  Power has increased by 30%, with flexible flight, exceptional maneuverability, and higher speeds.  A new canopy for camera protection and a bottom plate for sturdiness are integrated. Additionally, thi

Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz from WREKD Co.

Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6

Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz












The Firefly 1S Nano Baby V2 is a micro-drone with improved flight time, power and design compared to its predecessor.  Power has increased by 30%, with flexible flight, exceptional maneuverability, and higher speeds.  A new canopy for camera protection and a bottom plate for sturdiness are integrated. Additionally, this model includes the GOKU F411 ELRS 1S AIO V2 with ELRS 2.4G receiver (UART 2) for a lightweight design with optimal performance. This version utilizes the elite capabilities of the HDZero HD digital VTX system. The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator. 











Check out our other pre-built quads, as well as other great products from Flywoo!

Features:

Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 23,500KV motor and 1609 4-bladed 40mm propellers, delivers a 30% increase in power, flexible flight, and impressive speeds - perfect for racing competitions.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. 
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.



Specifications

Motor:  ROBO 1002 23,500KV
Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0


Props:  1609 - 4 blade 40mm 1.5mm Shaft

HD Digital VTX System:  HDZero Whoop Lite Bundle

Receiver:  ExpressLRS 2.4GHz
Weight:  31g
Flight Time:  Explorer 1S 450mAh HV V2: 4m - Explorer 1s 750mAh HV V2: 6m (approximate)

Speed:  70km/h (approximate)


GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller

MCU: STM32F411CEU6 
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V 
Input Voltage: 1S (&lt4.35v)
Firmware: FLYWOOF411_5IN1_AIO 

Mounting:  25x25mm, M2


Onboard 4in1 ESC

MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A 
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600
ELRS 2.4G RX (UART2)


Flywoo ROBO 1002 23500KV Fpv Motor:



Configuration: 9N12P
Stator Diameter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm

Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.5
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 52
Internal Resistance: 75mΩ
Max Current(3S): 14A

Max Efficiency Current: (2-4A)&gt84%

HDZero Whoop LITE VTX


Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package

HDZero Nano LITE Camera

Size: 14x16x11mm

Weight: 1.5gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°



Includes 

1x Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite &amp Nano Lite Cam - ELRS 2.4 GHz
4x 1609 - 4 40mm 1.5mm shaft

2x TPU Battery Mount

1x Hardware Screw Set
4x Prop guards


FLYWOO

Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1.6" Deadcat Micro Quad - HDZero, 2.4 GHz ELRS































Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the great capabilities of HDzero System.




















Check out our other pre-built quads, as well as other great products from Flywoo!










Features


Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. 
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.



Dead Cat Style


















The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.



















New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.

Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.

Ultra-light AIO with ELRS 2.4G RXThe drone's GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.
 





































HD Digital VTX System


The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator.



More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed. 

Specifications


Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit

Motor: ROBO 1002 19800KV

Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0

Propeller: 1608-3 Blade 40mm 1.5mm Shaft

Camera: Nano Lite Cam

Weight: 31g

GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller

MCU: STM32F411CEU6 
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V 
Input Voltage: 1S (&lt4.35v)
Firmware: FLYWOOF411_5IN1_AIO 

Mounting:  25x25mm, M2

Onboard 4in1 ESC

MCU: EFM8BB21

Power supply: 1S LiPo/LiPo HVCurrent: 5A 

Firmware: BLHeli_S

Factory firmware: O_H_5_REV16_8.HEX

Default protocol: DSHOT 150/300/600

ELRS 2.4G RX (UART2)


ROBO 1002 19800KV

Configuration: 9N12P

Stator Diamter: 10mm

Stator Length: 2mm

Shaft Diameter: 1.5mm

Motor Dimension(Dia.xLen): Φ13.5x7.75mm

Weight(g): 2.5(5cm wire)

Idle current(5)@5V(A): 1.3

No.of Cells(Lipo): 1S

Max Continuous Power(W)3S: 44

Internal Resistance: 89mΩ

Max Current(3S): 11.8A

Max Efficiency Current: (2-4A)&gt84%

HDZERO WHOOP LITE VTX


Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package

HDZERO NANO LITE CAMERA

Size: 14x16x11mm

Weight: 1.5gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°

Includes

1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite &amp Nano Lite Cam - ELRS 2.4 GHz


4x 1608 -3 40mm 1.5mm shaft


2x TPU battery mount


1x hardware screws set

4x Prop guards



Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased cam

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w































Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the great capabilities of HDzero System.




















Check out our other pre-built quads, as well as other great products from Flywoo!










Features


Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. 
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
New battery compartment design allows for easy replacement of batteries of different models.



Dead Cat Style


















The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.



















New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.

Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.

Ultra-light AIO with ELRS 2.4G RXThe drone&#39s GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.
 





































HD Digital VTX System


The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator.



More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed. 

Specifications


Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit

Motor: ROBO 1002 19800KV

Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0

Propeller: 1608-3 Blade 40mm 1.5mm Shaft

Camera: Nano Lite Cam

Weight: 31g

GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller

MCU: STM32F411CEU6 
GYRO: ICM42688
UARTS: 1/2
Soft serial port: 1
I2C: SCL/SDA
BEC: 5V 
Input Voltage: 1S (&amplt4.35v)
Firmware: FLYWOOF411_5IN1_AIO 

Mounting:  25x25mm, M2

Onboard 4in1 ESC

MCU: EFM8BB21

Power supply: 1S LiPo/LiPo HVCurrent: 5A 

Firmware: BLHeli_S

Factory firmware: O_H_5_REV16_8.HEX

Default protocol: DSHOT 150/300/600

ELRS 2.4G RX (UART2)


ROBO 1002 19800KV

Configuration: 9N12P

Stator Diamter: 10mm

Stator Length: 2mm

Shaft Diameter: 1.5mm

Motor Dimension(Dia.xLen): Φ13.5x7.75mm

Weight(g): 2.5(5cm wire)

Idle current(5)@5V(A): 1.3

No.of Cells(Lipo): 1S

Max Continuous Power(W)3S: 44

Internal Resistance: 89mΩ

Max Current(3S): 11.8A

Max Efficiency Current: (2-4A)&ampgt84%

HDZERO WHOOP LITE VTX


Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package

HDZERO NANO LITE CAMERA

Size: 14x16x11mm

Weight: 1.5gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°

Includes

1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6&quot Deadcat Micro Quad w/ HDZero Whoop Lite &ampamp Nano Lite Cam - ELRS 2.4 GHz


4x 1608 -3 40mm 1.5mm shaft


2x TPU battery mount


1x hardware screws set

4x Prop ..

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz from WREKD Co.

EMAX BNF Tinyhawk III Plus HD Whoop - HDZero, 2.4GHz ELRS

The EMAX Tinyhawk III Plus BNF is your gateway to an exhilarating FPV drone experience.&nbsp

The EMAX Tinyhawk III Plus BNF is your gateway to an exhilarating FPV drone experience. 

EMAX TinyHawk III Plus BNF w/ ELRS - HDZero/Analog

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers&#39 feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. 
Check out all our pre-built quads, and all our EMAX gear!

 Specifications

Wheelbase: 76mm

Weight: 35.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam HDZero Nano Lite

VTX: HDZero Whoop Lite 0/25mW/200mW

Battery: 1S 650mAh

Includes

1x Tinyhawk 3 Plus HD BNF

1x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger


All products containing batteries must be shipped by a ground shipping method. The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements

EMAX BNF Tinyhawk III Plus Whoop 1-2S HD Racing Drone w/ HDZero Whoop Lite & Nano Cam Lite - ELRS 2.4 GHz from WREKD Co.

EMAX BNF Tinyhawk III Plus Whoop 1-2S HD Racing Drone w/ HDZero Whoop Lite & Nano Cam Lite - ELRS 2.4 GHz

EMAX Tinyhawk III Plus HDZero Bind-N-Fly BNF ELRS - RMRC

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. 
Check out all our pre-built quads, and all our EMAX gear!

 Specifications

Wheelbase: 76mm

Weight: 35.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam HDZero Nano Lite

VTX: HDZero Whoop Lite 0/25mW/200mW

Battery: 1S 650mAh

Includes

1x Tinyhawk 3 Plus HD BNF

1x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger


EMAX BNF Tinyhawk III Plus Whoop 1-2S HD Racing Drone w/ HDZero Whoop 

EMAX RTF Tinyhawk III Plus Whoop - HDZero, 2.4GHz ELRS

Pre-Orders shipping ASAP! All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. 
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus HD BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 HDZero Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger props, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS HDZERO

Wheelbase: 76mm

Weight: 35.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam HDZero Nano Lite

VTX: HDZero Whoop Lite 0/25mW/200mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 HD GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 425g

Screen Resolution: 720x1080

Screen Size: 4.45 Inch

Battery: 2200mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: Digital HDZero 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended

Includes

1x Tinyhawk 3 Plus HD BNF
1x EMAX E8 Transmitter (ELRS-2.4G)
1x EMAX Transporter 2 HDZero Goggles
2x EMAX 1S HV 650mAh Battery
1x Hardware Kit
1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)
1x USB Battery Charger
1x Monitor to Transmitter Mounting Kit
1x HDZero Firmware Update Cable Kit


Pre-Orders shipping ASAP! All products containing batteries must be shipped by a ground shipping method. The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technolo

(PRE-ORDER) EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz HDZero Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

The EMAX Tinyhawk III Plus HDZERO Bundle is your gateway to an exhilarating FPV drone experience.&nbsp

The EMAX Tinyhawk III Plus HDZERO Bundle is your gateway to an exhilarating FPV drone experience. 

EMAX TinyHawk III Plus RTF Bundle - HDZero w/ Goggles + Radio

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. 
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus HD BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 HDZero Goggles, EMAX 1S HV 650mAh battery, USB Battery charger props, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS HDZERO

Wheelbase: 76mm

Weight: 35.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam HDZero Nano Lite

VTX: HDZero Whoop Lite 0/25mW/200mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 HD GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 425g

Screen Resolution: 720x1080

Screen Size: 4.45 Inch

Battery: 2200mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: Digital HDZero 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended

Includes

1x Tinyhawk 3 Plus HD BNF
1x EMAX E8 Transmitter (ELRS-2.4G)
1x EMAX Transporter 2 HDZero Goggles
1x EMAX 1S HV 650mAh Battery
1x Hardware Kit
1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)
1x USB Battery Charger
1x Monitor to Transmitter Mounting Kit
1x HDZero Firmware Update Cable Kit


The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV! The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision. The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus. This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus HD BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 HDZero Goggles, 2 EMAX 1S HV 650mAh battery, USB Battery charger props, and hardware. Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications TINYHAWK 3 PLUS HDZERO Wheelbase: 76mm Weight: 35.5g Motor: TH0802 II - 15000KV Propellers: Avia Tinyhawk Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G) Camera: Runcam HDZero Nano Lite VTX: HDZero Whoop Lite 0/25mW/200mW Battery: 1S 650mAh E8 TRANSMITTER (ELRS-2.4G) Dimensions: LxWxH=150x140x45mm Weight: 260g Channels: 8 Protocol: ELRS 2.4G Band: 2.4gHz（2400-2483.5MHz） Power Levels: 10mW/25mW/50mW/100mW Battery: 800mAh 18650 Charging: USB-C 1A Recommended Operating Voltage: 3.7-4.2V Input: Type-C, 3.5mm TRANSPORTER 2 HD GOGGLES Dimensions: LxWxH=155x100x90mm Weight: 425g Screen Resolution: 720x1080 Screen Size: 4.45 Inch Battery: 2200mAh Integrated Operating Voltage: 3.7V-4.2V Band: Digital HDZero 5.8GHz（5658-5945MHz） Charging: USB-C 1A Recommended DVR: 32GB Micro SD Recommended Includes 1x Tinyhawk 3 Plus HD BNF 1x EMAX E8 Transmitter (ELRS-2.4G) 1x EMAX Transporter 2 HDZero Goggles 2x EMAX 1S HV 650mAh Battery 1x Hardware Kit 1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW) 1x USB Battery Charger 1x Monitor to Transmitter Mounting Kit 1x HDZero Firmware Update Cable Kit

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz HDZero Kit w/ Goggles, Radio Transmitter, Batteries, Charger, and Drone

EMAX RTF Tinyhawk III Plus Whoop Ready to Fly ELRS 2.4GHz HDZero Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

GEPRC

GEPRC BNF CineLog 20 HD 2" Cinewhoop - RunCam Wasp, 2.4GHz ELRS

For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog four mainstream video transmission systems on the market.
The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 AIR Unit shooting, which can achieve an excellent anti-shake effect. The O3 Air Unit version can shoot 4K 60fps video without mounting any camera. It is lighter in weight and has a longer battery life.
It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras.
Find the recommended 4S 450-750mAh batteries here!
Check out our other pre-built quads, as well as the rest of our GEPRC selection.


Features

Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect.
Provide mainstream Link Wasp, O3 AIR Unit, and Walksnail HD video transmission versions, Bind-N-Fly to save the trouble of building and tuning.
2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.
SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.
Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted.
The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible.

Specifications

Model: GEPRC BNF Cinelog20 HD 4S 2" Cinewhoop w/ RunCam Wasp &amp Micro Cam - ELRS 2.4GHz
Frame: GEP-CL20
Wheelbase: 100mm
Gimbal plate: 2.0mm
Top plate: 2.5mm
Bottom plate: 1.5mm
FC system: GEP-F411-35A AIO
MCU: STM32F411CEU6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 35A
VTX: Link
Camera: RunCam Wasp
Antenna: GEPRC Peano 5.8G LHCP U.FL

Motor: GR1303.5 5500KV
Propeller: EMAX Avan Micro 2×2.4×4
Receiver: PNP (built-in DJI receiver), ELRS2.4G
Recommended battery: LiHv 4S 450mah-660mah
Flight time: 4-6min

Includes

1x CineLog20 HD Wasp
2x 2-inch propellers (pairs)
1x Naked GoPro Base
2x M15×150mm battery strap
2x Battery Silicone Pads
2x EVA Landing Pads
1x Set of screws
1x L-shaped screwdriver (1.5mm)
1x Antenna fixed tube
1x 4S Naked GoPro power cable (with balanced terminal head)
2x EVA damping rings of guards
1x TBS Antenna mount (Vertical Type)
1x TBS Antenna mount (Horizontal Type)
1x TBS Antenna printed parts

The screw package includes:

3x M2×12mm cup head screws
2x M2×5mm round head screws
1x M2×8mm round head screw with pad
3x M2×7mm round head screws
2x M2×8mm round head screws
2x M2 iron nuts
1x self-clinching nut


For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog four mainstream video transmission systems on the market. The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesig

GEPRC BNF CineLog20 HD 4S 2" Cinewhoop w/ RunCam Wasp & Micro Cam - ELRS 2.4GHz

GEPRC BNF CineLog20 HD 4S 2" Cinewhoop w/ RunCam Wasp & Micro Cam - EL

For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog four mainstream video transmission systems on the market.
The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 AIR Unit shooting, which can achieve an excellent anti-shake effect. The O3 Air Unit version can shoot 4K 60fps video without mounting any camera. It is lighter in weight and has a longer battery life.
It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras.
 


Features

Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect.
Provide mainstream Link Wasp, O3 AIR Unit, and Walksnail HD video transmission versions, Bind-N-Fly to save the trouble of building and tuning.
2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.
SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.
Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted.
The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible.

Specifications

Model: GEPRC BNF Cinelog20 HD 4S 2" Cinewhoop w/ RunCam Wasp &amp Micro Cam - ELRS 2.4GHz
Frame: GEP-CL20
Wheelbase: 100mm
Gimbal plate: 2.0mm
Top plate: 2.5mm
Bottom plate: 1.5mm
FC system: GEP-F411-35A AIO
MCU: STM32F411CEU6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 35A
VTX: Link
Camera: RunCam Wasp
Antenna: GEPRC Peano 5.8G LHCP U.FL

Motor: GR1303.5 5500KV
Propeller: EMAX Avan Micro 2×2.4×4
Receiver: PNP (built-in DJI receiver), ELRS2.4G
Recommended battery: LiHv 4S 450mah-660mah
Flight time: 4-6min

Includes

1x CineLog20 HD Wasp
2x 2-inch propellers (pairs)
1x Naked GoPro Base
2x M15×150mm battery strap
2x Battery Silicone Pads
2x EVA Landing Pads
1x Set of screws
1x L-shaped screwdriver (1.5mm)
1x Antenna fixed tube
1x 4S Naked GoPro power cable (with balanced terminal head)
2x EVA damping rings of guards
1x TBS Antenna mount (Vertical Type)
1x TBS Antenna mount (Horizontal Type)
1x TBS Antenna printed parts

The screw package includes:

3x M2×12mm cup head screws
2x M2×5mm round head screws
1x M2×8mm round head screw with pad
3x M2×7mm round head screws
2x M2×8mm round head screws
2x M2 iron nuts
1x self-clinching nut


GEPRC BNF CineLog20 HD 4S 2

For the shooting needs of complex indoor environments, GEPRC has recently released the 2&quot Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog four mainstream video transmission systems on the market.
The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 AIR Unit shooting, which can achieve an excellent anti-shake effect. The O3 Air Unit version can shoot 4K 60fps video without mounting any camera. It is lighter in weight and has a longer battery life.
It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras.
Find the recommended 4S 450-750mAh batteries here!
Check out our other pre-built quads, as well as the rest of our GEPRC selection.


Features

Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect.
Provide mainstream Link Wasp, O3 AIR Unit, and Walksnail HD video transmission versions, Bind-N-Fly to save the trouble of building and tuning.
2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.
SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.
Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted.
The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible.

Specifications

Model: GEPRC BNF Cinelog20 HD 4S 2&quot Cinewhoop w/ RunCam Wasp &ampamp Micro Cam - ELRS 2.4GHz
Frame: GEP-CL20
Wheelbase: 100mm
Gimbal plate: 2.0mm
Top plate: 2.5mm
Bottom plate: 1.5mm
FC system: GEP-F411-35A AIO
MCU: STM32F411CEU6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 35A
VTX: Link
Camera: RunCam Wasp
Antenna: GEPRC Peano 5.8G LHCP U.FL

Motor: GR1303.5 5500KV
Propeller: EMAX Avan Micro 2×2.4×4
Receiver: PNP (built-in DJI receiver), ELRS2.4G
Recommended battery: LiHv 4S 450mah-660mah
Flight time: 4-6min

Includes

1x CineLog20 HD Wasp
2x 2-inch propellers (pairs)
1x Naked GoPro Base
2x M15×150mm battery strap
2x Battery Silicone Pads
2x EVA Landing Pads
1x Set of screws
1x L-shaped screwdriver (1.5mm)
1x Antenna fixed tube
1x 4S Naked GoPro power cable (with balanced terminal head)
2x EVA damping rings of guards
1x TBS Antenna mount (Vertical Type)
1x TBS Antenna mount (Horizontal Type)
1x TBS Antenna printed parts

The screw package includes:

3x M2×12mm cup head screws
2x M2×5mm round head screws
1x M2×8mm round head screw with pad
3x M2×7mm round head screws
2x M2×8mm round head screws
2x M2 iron nuts
1x self-clinching nut


GEPRC BNF CineLog20 HD 4S 2" Cinewhoop w/ RunCam Wasp & Micro Cam - ELRS 2.4GHz from WREKD Co.

iFlight

iFlight BNF Defender 25 HD 2.5" Cinewhoop - DJI O3

All batteries must be shipped by a ground shipping method.
Introducing iFlight's Defender 25, a sub-250 drone featuring the DJI O3 Air Unit. At 249g weight, Defender 25 doesn't require registration in most countries. The compact and lightweight design also make it easy to carry and store. It will be your best travel buddy to redefine your FPV adventure. The built-in 2.5-inch propeller guards were designed to fly boldly. You’ll experience a completely new creative freedom to fly whenever and wherever. The durable injection molded frame not only prevents damage to your motors or propellers but also protects the environment from small flight errors.
Equipped with the latest tech from DJI, the O3 Air Unit HD transmission system, the Defender 25 supports 4K video and shoots up to 155° super-wide FOV footage for stunning visuals. In addition, D-Cinelike color mode provides more creative freedom for color grading, allowing you to edit and adjust your footage. 
They’ve also added a special vibration-damped camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the built-in or in-post camera stabilization.











Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!












Features


Optimized Landing Gear for Take-Off in Complex Environments
Built-in High-Performance video and Receiver Antennas
4K Stabilized Video with 155° Ultra-Wide Angle
Crash-Protected Quick-Release Battery
Countless Easy-to-Use Features
Ultralight and Free to Fly
Small and Mighty

Specifications
Defender 25

Product Name: Defender 25 4S HD
Flight Electronics: BLITZ D25 F7 AIO
Video Transmission: DJI O3 Air Unit
Frame: 112±2mm
Motor: Defender25 1404
Prop: Defender25 2525 props (2.5-inch)
Weight of the Aircraft: 180g
Takeoff Weight incl. 550mAh battery: ≤249g
Dimensions (L×W×H)：158x155x69mm
Max Ascent Speed: 6 m/s (Normal Mode, Sport Mode)
Max Descent Speed: 6 m/s (Normal Mode, Sport Mode)
Max Speed: 100Km/H (Manual Mode)
Maximum Takeoff Altitude: 200 m
Max Hover Time: Approx. 6 mins (with 550mAh battery), 10mins (with 900mAh battery)
Max Flight Distance: 2-3 km
Max Wind Speed Resistance: 80 Km/H (Level 5)
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Transmission Power (EIRP): FCC: &lt 33 dBm / CE: &lt 14 dBm / SRRC: &lt 30 dBm
Antennas: Dual Antennas
GNSS: N/A

Video Transmission

Product Name: DJI O3 Air Unit
Weight: Approx. 36.4grams
Dimensions (L×W×H): L16.7×W103.9×H 81.3mm
Screen Size (single screen): 0.49-inch
Resolution (single screen): 1920×1080
Refresh Rate: Up to 100 Hz
Interpupillary Distance Range: 56-72 mm
Diopter Adjustment Range: -8.0 D to +2.0 D
FOV (single screen): 51°
Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz
Transmission Power (EIRP):
2.4 GHz: &lt 30 dBm (FCC), &lt 20 dBm (CE/SRRC/KC)
5.8 GHz [4]: &lt 30 dBm (FCC), &lt 23 dBm (SRRC), &lt 14 dBm (CE/KC)
Max Video Transmission Bitrate: 50 Mbps
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Power Input: 7-9 V (1.5 A)



Recommended (Not Included)


iFlight Defender 25 Battery - 900mAh






Includes

1x iFlight BNF Defender 25 HD 4S 2.5" Cinewhoop w/ DJI O3 Air Unit and DJI Camera (Pre-Built, Tuned, and Tested)
1x Defender 25 550mAh Battery
1x Charging Adapter Board
2x Defender 25 2525 Props (pairs)





All batteries must be shipped by a ground shipping method. Introducing iFlight's Defender 25, a sub-250 drone featuring the DJI O3 Air Unit. At 249g weight, Defender 25 doesn't require registration in most countries. The compact and lightweight design also make it easy to carry and store. It will be your best travel bu

iFlight BNF Defender 25 HD 4S 2.5" Cinewhoop w/ DJI O3 Air Unit and DJI Camera - Choose Receiver

iFlight BNF Defender 25 HD 4S 2.5

IFLIGHT

All batteries must be shipped by a ground shipping method.
*Defender 25 4S HD BNF comes with GPS installed by default.
Introducing iFlight's Defender 25, a sub-250 drone featuring the DJI O3 Air Unit. At 249g weight, Defender 25 doesn't require registration in most countries. The compact and lightweight design also make it easy to carry and store. It will be your best travel buddy to redefine your FPV adventure. The built-in 2.5-inch propeller guards were designed to fly boldly. You’ll experience a completely new creative freedom to fly whenever and wherever. The durable injection molded frame not only prevents damage to your motors or propellers but also protects the environment from small flight errors.
Equipped with the latest tech from DJI, the O3 Air Unit HD transmission system, the Defender 25 supports 4K video and shoots up to 155° super-wide FOV footage for stunning visuals. In addition, D-Cinelike color mode provides more creative freedom for color grading, allowing you to edit and adjust your footage. 
They’ve also added a special vibration-damped camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the built-in or in-post camera stabilization.











Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!












Features


Optimized Landing Gear for Take-Off in Complex Environments
Built-in High-Performance video and Receiver Antennas
4K Stabilized Video with 155° Ultra-Wide Angle
Crash-Protected Quick-Release Battery
Countless Easy-to-Use Features
Ultralight and Free to Fly
Small and Mighty

Specifications
Defender 25

Product Name: Defender 25 4S HD
Flight Electronics: BLITZ D25 F7 AIO
Video Transmission: DJI O3 Air Unit
Frame: 112±2mm
Motor: Defender25 1404
Prop: Defender25 2525 props (2.5-inch)
Weight of the Aircraft: 180g
Takeoff Weight incl. 550mAh battery: ≤249g
Dimensions (L×W×H)：158x155x69mm
Max Ascent Speed: 6 m/s (Normal Mode, Sport Mode)
Max Descent Speed: 6 m/s (Normal Mode, Sport Mode)
Max Speed: 100Km/H (Manual Mode)
Maximum Takeoff Altitude: 200 m
Max Hover Time: Approx. 6 mins (with 550mAh battery), 10mins (with 900mAh battery)
Max Flight Distance: 2-3 km
Max Wind Speed Resistance: 80 Km/H (Level 5)
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Transmission Power (EIRP): FCC: &lt 33 dBm / CE: &lt 14 dBm / SRRC: &lt 30 dBm
Antennas: Dual Antennas
GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Video Transmission

Product Name: DJI O3 Air Unit
Weight: Approx. 36.4grams
Dimensions (L×W×H): L16.7×W103.9×H 81.3mm
Screen Size (single screen): 0.49-inch
Resolution (single screen): 1920×1080
Refresh Rate: Up to 100 Hz
Interpupillary Distance Range: 56-72 mm
Diopter Adjustment Range: -8.0 D to +2.0 D
FOV (single screen): 51°
Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz
Transmission Power (EIRP):
2.4 GHz: &lt 30 dBm (FCC), &lt 20 dBm (CE/SRRC/KC)
5.8 GHz [4]: &lt 30 dBm (FCC), &lt 23 dBm (SRRC), &lt 14 dBm (CE/KC)
Max Video Transmission Bitrate: 50 Mbps
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Power Input: 7-9 V (1.5 A)



Recommended (Not Included)


iFlight Defender 25 Battery - 900mAh






Includes

1x iFlight BNF Defender 25 HD 4S 2.5" Cinewhoop w/ DJI O3 Air Unit and DJI Camera (Pre-Built, Tuned, and Tested)
1x Defender 25 550mAh Battery
1x Charging Adapter Board
2x Defender 25 2525 Props (pairs)





All batteries must be shipped by a ground shipping method. *Defender 25 4S HD BNF comes with GPS installed by default. Introducing iFlight's Defender 25, a sub-250 drone featuring the DJI O3 Air Unit. At 249g weight, Defender 25 doesn't require registration in most countries. The compact and lightweight design also mak

iFlight BNF Defender 25 HD 4S 2.5" Cinewhoop w/ DJI O3 Air Unit and DJ

All batteries must be shipped by a ground shipping method.
Introducing iFlight&#39s Defender 25, a sub-250 drone featuring the DJI O3 Air Unit. At 249g weight, Defender 25 doesn&#39t require registration in most countries. The compact and lightweight design also make it easy to carry and store. It will be your best travel buddy to redefine your FPV adventure. The built-in 2.5-inch propeller guards were designed to fly boldly. You’ll experience a completely new creative freedom to fly whenever and wherever. The durable injection molded frame not only prevents damage to your motors or propellers but also protects the environment from small flight errors.
Equipped with the latest tech from DJI, the O3 Air Unit HD transmission system, the Defender 25 supports 4K video and shoots up to 155° super-wide FOV footage for stunning visuals. In addition, D-Cinelike color mode provides more creative freedom for color grading, allowing you to edit and adjust your footage. 
They’ve also added a special vibration-damped camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the built-in or in-post camera stabilization.











Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!












Features


Optimized Landing Gear for Take-Off in Complex Environments
Built-in High-Performance video and Receiver Antennas
4K Stabilized Video with 155° Ultra-Wide Angle
Crash-Protected Quick-Release Battery
Countless Easy-to-Use Features
Ultralight and Free to Fly
Small and Mighty

Specifications
Defender 25

Product Name: Defender 25 4S HD
Flight Electronics: BLITZ D25 F7 AIO
Video Transmission: DJI O3 Air Unit
Frame: 112±2mm
Motor: Defender25 1404
Prop: Defender25 2525 props (2.5-inch)
Weight of the Aircraft: 180g
Takeoff Weight incl. 550mAh battery: ≤249g
Dimensions (L×W×H)：158x155x69mm
Max Ascent Speed: 6 m/s (Normal Mode, Sport Mode)
Max Descent Speed: 6 m/s (Normal Mode, Sport Mode)
Max Speed: 100Km/H (Manual Mode)
Maximum Takeoff Altitude: 200 m
Max Hover Time: Approx. 6 mins (with 550mAh battery), 10mins (with 900mAh battery)
Max Flight Distance: 2-3 km
Max Wind Speed Resistance: 80 Km/H (Level 5)
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Transmission Power (EIRP): FCC: &amplt 33 dBm / CE: &amplt 14 dBm / SRRC: &amplt 30 dBm
Antennas: Dual Antennas
GNSS: N/A

Video Transmission

Product Name: DJI O3 Air Unit
Weight: Approx. 36.4grams
Dimensions (L×W×H): L16.7×W103.9×H 81.3mm
Screen Size (single screen): 0.49-inch
Resolution (single screen): 1920×1080
Refresh Rate: Up to 100 Hz
Interpupillary Distance Range: 56-72 mm
Diopter Adjustment Range: -8.0 D to +2.0 D
FOV (single screen): 51°
Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz
Transmission Power (EIRP):
2.4 GHz: &amplt 30 dBm (FCC), &amplt 20 dBm (CE/SRRC/KC)
5.8 GHz [4]: &amplt 30 dBm (FCC), &amplt 23 dBm (SRRC), &amplt 14 dBm (CE/KC)
Max Video Transmission Bitrate: 50 Mbps
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Power Input: 7-9 V (1.5 A)



Recommended (Not Included)


iFlight Defender 25 Battery - 900mAh






Includes

1x iFlight BNF Defender 25 HD 4S 2.5&quot Cinewhoop w/ DJI O3 Air Unit and DJI Camera (Pre-Built, Tuned, and Tested)
1x Defender 25 550mAh Battery
1x Charging Adapter Board
2x Defender 25 2525 Props (pairs)





iFlight BNF Defender 25 HD 4S 2.5" Cinewhoop w/ DJI O3 Air Unit and DJI Camera - Choose Receiver from WREKD Co.

BetaFPV

BetaFPV BNF Meteor75 Pro 1S Analog 75mm Whoop

BETAFPV Meteor75 Pro features 45mm propellers, being the largest 1S whoop drone for greater thrust and lift. Comes with more powerful 1102 22000KV motors and a new BT2.0 550mAh 1S battery. Besides, it has the same flight controller, Analog VTX system, and canopy as the  F4 1S 5A FC, C03 FPV camera, M03 350mW VTX, and Micro Canopy on Meteor75. This drone combo makes Metoer75 Pro faster, more responsive, and flight time, which would be ideal for FPV racing or acrobatic flying indoors or outdoors.

The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.

Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.

Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receivers due to the two UART ports on the board.
The various colors of the spare parts including the Meteor75 Pro frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.

Specification

Item: Meteor75 Pro Brushless Whoop Quadcopter
Motors: 1102 22000KV Motor

Battery: BT2.0 550mAh 1S Battery

Frame: Meteor75 Pro Brushless Whoop Frame

Propellers: Gemfan 45mm 3-Blade Propellers

Camera: C03 FPV Camera

Tilt: 30°/20°
Canopy: Canopy for Micro Camera 2022 version
FC&ampESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0
Receiver Option: ELRS2.4G, Frsky/PNP, TBS Crossfire
VTX: M03 25-350mW VTX

Flight time: 6:40


Weight: 31.33g


Meteor75 Pro VS Meteor75
Upgraded from Meteor75, the Meteor75 Pro is the largest 1S whoop drone with 45mm propellers, which is able to generate more thrust and lift. It comes with a 550mAh larger battery, and higher KV motors, making it more suitable for performing acrobatic maneuvers. The Meteor75 uses 0802SE 19500KV motors, 40mm props, and a 450mAh battery, which are great for lighter quadcopters.





Meteor75 Pro
Meteor75


Weight
31.33g
24.98g



Frame

Meteor75 Pro Frame
Meteor75 Frame


Motors
1102 22000KV Motors
0802SE 19500KV Motors


Propellers
45mm 3-Blade Props
40mm 2-Blade Props


Battery

550mAh 1S Battery (Default), 450mAh 1S Battery

450mAh 1S Battery (Default), 550mAh 1S Battery


Flight Time
6:40
6:00 (450mAh), 6:50 (550mAh)





BETAFPV Meteor75 Pro features 45mm propellers, being the largest 1S whoop drone for greater thrust and lift. Comes with more powerful 1102 22000KV motors and a new BT2.0 550mAh 1S battery. Besides, it has the same flight controller, Analog VTX system, and canopy as the  F4 1S 5A FC, C03 FPV camera, M03 350mW VTX, and M

BETAFPV - Meteor75 Pro Brushless Whoop Quadcopter

BETAFPV

FRSKY/PNP in stock and shipping same day!!! ELRS and TBS PRE-ORDERS shipping ASAP! All products with batteries must be shipped by a ground shipping method.
For your next analog whoop sized quad, go with this ultra-powerful 1S BNF. Small and nimble enough to cruise through tight spaces, and enough power to push it outside where you want to fly. Great for those who are new to this territory and wish to get started.  
Meteor75 Pro features 45mm propellers, being the largest 1S whoop drone for greater thrust and lift. Comes with more powerful 1102 22000KV motors and a new BT2.0 550mAh 1S battery. Besides, it has the same flight controller, analog VTX system, and canopy as the F4 1S 5A FC, C03 FPV camera, M03 350mW VTX, and Micro Canopy on Meteor75. This combo gives the Metoer75 Pro more flight time while being faster &amp more responsive. That makes this whoop ideal for FPV racing or acrobatic flying indoors or outdoors.


Note: The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP.

Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!

Features

The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone..
Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receiver due to the two UART ports on the board.
The various colors of the spare parts including the Meteor75 Pro frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.

Meteor75 Pro VS Meteor75
Upgraded from Meteor75, the Meteor75 Pro is the largest 1S whoop drone with 45mm propellers, which is able to generate more thrust and lift. It comes with a 550mAh larger battery, and higher KV motors, making it more suitable for performing acrobatic maneuvers. The Meteor75 uses 0802SE 19500KV motors, 40mm props, and a 450mAh battery, which are great for lighter quadcopters.





Meteor75 Pro
Meteor75


Weight
31.33g
24.98g



Frame

Meteor75 Pro Frame
Meteor75 Frame


Motors
1102 22000KV Motors
0802SE 19500KV Motors


Propellers
45mm 3-Blade Props
40mm 2-Blade Props


Battery
550mAh 1S Battery (Default), 450mAh 1S Battery
450mAh 1S Battery (Default), 550mAh 1S Battery


Flight Time
6:40
6:00 (450mAh), 6:50 (550mAh)





Flight Controller
The latest F4 1S 5A flight controller is applied to all BNF versions of Meteor75 Pro. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.



Meteor75 Pro (ELRS)

Meteor75 Pro (Frsky, PNP, TBS)


FC Inside
F4 1S 5A FC (Serial ELRS 2.4G) V2.0
F4 1S 5A FC (SPI Frsky) V3.0


Gyro
BMI270
BMI270


FC Firmware
BETAFPVF411
BETAFPVF411RX


UART Port
One UART Port
Two UART Ports


External RX
Not Supported
Supported




Note: For Serial ELRS 2.4G, the Betaflight firmware 4.3.0 and up start to support BMI270 gyro. For SPI Frsky, DO NOT flash the other firmware, otherwise, the RX will be lost in control at a very close range. 
Please flash betaflight_4.2.11_BETAFPVF411RX firmware built by BETAFPV for SPI Frsky.
Download the FC firmware and CLI dump file for Meteor 75 ELRS2.4G, Frsky, or TBS.
C03 Camera
C03 is a lightweight 1.45g and 1200TVL resolution camera that has been designed to provide superb performance for micro FPV quadcopters. It has a 2.1mm lens that gives a 160° field of view, operating in 4:3 image ratios, and features a 1/3'' CMOS sensor for clear and brilliant images.Powerful 1S Drone Combo
Meteor75 Pro with 45mm 3-Blade props performs very precise, agile, and fantastic flying, which is the largest 1S power whoop drone nowadays. Fit out with 1102 22000KV motors and BT2.0 550mAh 1S battery, Meteor75 Pro has an excellent thrust-to-weight ratio performance.Endurance Boosting Battery
Meteor75 Pro applies the new BT2.0 550mAh 1S battery, which is capable of delivering a discharge rate of 40C (continuous) and 80C (burst). With its larger capacity and stronger power, pilots can enjoy more flight time and a robust flight experience.Meteor75 Pro Frame
Meteor75 Pro frame is the largest 1S whoop frame with 45mm propellers currently and comes with more features. The frame features a roomier battery slot for more battery choices such as BT2.0 550mAh battery. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. In addition, the Meteor75 Pro frame offers seven colors for options, which pilots should purchase separately.
Specification

Item: Meteor75 Pro Brushless Whoop Quadcopter

FC&ampESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0
Frame: Meteor75 Pro Brushless Whoop Frame
Motors: 1102 22000KV Motor
Props: Gemfan 45mm 3-Blade Propellers (1.5mm Shaft)
Camera: C03 FPV Camera
Tilt: 30° (default)/20° (optional)
Canopy: Canopy for Micro Camera 2022 version
Receiver Option: Serial ELRS2.4G, Frsky/PNP, TBS Crossfire
VTX: M03 25-350mW VTX
Battery: BT2.0 550mAh 1S Battery
Flight time: 6:40 mins (stable flying) / 4.5 mins (acro flying)
Weight: 31.33g

FAQ


Download the FC firmware and CLI dump file for Meteor75 Pro.

Includes

1x Meteor75 Pro Brushless Whoop Quadcopter
2x BT2.0 550mAh 1S Battery
1x Type-C USB Cable
1x BT2.0 Battery Charger and Voltage Tester
4x 45mm 3-Blade Props (1.5mm Shaft)
1x Screwdriver
1x Pack of Screws
1x Accessories for Canopy


FRSKY/PNP in stock and shipping same day!!! ELRS and TBS PRE-ORDERS shipping ASAP! All products with batteries must be shipped by a ground shipping method. For your next analog whoop sized quad, go with this ultra-powerful 1S BNF. Small and nimble enough to cruise through tight spaces, and enough power to push it outsi