FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

EMAX

EMAX BNF/ PNP Hawk Apex 3.5" HDZero Quadcopter

EMAX Apex 3.5 Inch HDZero Ultralight Racing Drone PNP ELRS

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

EMAX Apex 3.5 Inch HDZero Ultralight Racing Drone PNP ELRS - RMRC

  THIS PRODUCT REQUIRES HDZERO VIDEO RECEIVER FOR USE: HDZero VRX  Wheelbase: 162mm Motor: ECO II 2004 3000kv Propeller: Avia 3630 Tri-blade Weight (excluding battery): 167g AIO: STM32F722 + 4 IN 1 25A ESC VTX: HDZero Whoop VTX  Camera: Runcam Nano HDZero VTX Antenna: EMAX Nano Antenna UFL BNF Variant Receiver: EMAX Ex

Hawk Apex 3.5 Inch HDZero Ultralight Racing Drone

Improvement requires evolution, changing the status quo, and forming new normals. In our constant quest for self-improvement, a new meta has been formed through the Hawk Apex. In a game of predator and prey, every movement counts and every engineered detail plays a role. In a high stakes race, the ability to see clearl

Emax Hawk Apex 3.5

Emax USA

 


THIS PRODUCT REQUIRES HDZERO VIDEO RECEIVER FOR USE: HDZero VRX 

Wheelbase: 162mm
Motor: ECO II 2004 3000kv
Propeller: Avia 3630 Tri-blade
Weight (excluding battery): 167g
AIO: STM32F722 + 4 IN 1 25A ESC
VTX: HDZero Whoop VTX 
Camera: Runcam Nano HDZero
VTX Antenna: EMAX Nano Antenna UFL
BNF Variant Receiver: EMAX ExpressLRS RX
Recommended Battery: 4S XT30

Hawk Apex 3.5 Inch HDZero Ultralight Racing Drone from WREKD Co.

Pre-Built Quad Kit Type

Pre-Built Quads and Kits

Quad Frame Size

Quad Type

EMAX BNF/PNP Hawk Apex 5" HDZero Quadcopter

Emax Hawk Apex 5

  THIS PRODUCT REQUIRES HDZERO VIDEO RECEIVER FOR USE: HDZero VRX  Motor: ECO II 2004 Propeller: Avia 5030 Tri-blade Weight (excluding battery): 167g AIO: STM32F722 + 4 IN 1 25A ESC VTX: HDZero Whoop VTX  Camera: Runcam Nano HDZero VTX Antenna: EMAX Nano Antenna UFL BNF Variant Receiver: EMAX ExpressLRS RX Recommended 

Hawk Apex 5 Inch HDZero Ultralight Racing Drone

 


THIS PRODUCT REQUIRES HDZERO VIDEO RECEIVER FOR USE: HDZero VRX 



Motor: ECO II 2004
Propeller: Avia 5030 Tri-blade

Weight (excluding battery): 167g
AIO: STM32F722 + 4 IN 1 25A ESC
VTX: HDZero Whoop VTX 
Camera: Runcam Nano HDZero
VTX Antenna: EMAX Nano Antenna UFL
BNF Variant Receiver: EMAX ExpressLRS RX
Recommended Battery: 4S XT30
 

Hawk Apex 5 Inch HDZero Ultralight Racing Drone from WREKD Co.

EMAX RTF EZ Pilot Pro Kit - Goggles, Radio Transmitter, 75mm Whoop

 

 
 
 
Drone Specs:

Wheelbase: 75mm
Dry weight: 32.5g
AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter
Motor: 08025 II KV15000
RX Protocol: FrSky D8 SPI

Includes:

1x EZ Pilot Pro Drone
1x E8 Transmitter
1x Transporter 2 Non-DVR Version
1x Monitor Mounting Hardware
1x EMAX 1S 450 mAh LiPo battery
1x 6-Port 1S USB LiPo Battery Charger
1x USB Cable for Charging + Programming
1x Set Spare Turtlemode Propellers
1x Set Spare Hardware

        Drone Specs: Wheelbase: 75mm Dry weight: 32.5g AIO: MATEKF411 FC w/ 6A ESC and  25/100/200mw switchable video transmitter Motor: 08025 II KV15000 RX Protocol: FrSky D8 SPI Includes: 1x EZ Pilot Pro Drone 1x E8 Transmitter 1x Transporter 2 Non-DVR Version 1x Monitor Mounting Hardware 1x EMAX 1S 450 mAh LiPo batt

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles from WREKD Co.

EZ Pilot Pro Ready-To-Fly RTF FPV Drone w/ Controller & Goggles

The EZ Pilot Pro drone features an improved frame, 200mw VTX capabilities, and a solid pin PH2.0 connector over the original.

EMAX EZ Pilot Pro Beginner FPV Drone RTF Kit w/ Transporter 2 Goggles + E8 Transmitter

Consistent improvement is the goal of our team at EMAX but this comes at a cost. With more upgrades to our micro indoor racing drones which cater to more experienced pilots, we further alienate potential budding pilots looking to explore the world of FPV. This is why our engineers have come up with a solution through t

EMAX EZ Pilot Pro Indoor Racing Drone - RTF

EMAX BNF TinyHawk III 76mm Whoop

Introducing... the EMAX TinyHawk III BNF Quadcopter!! This BNF features the RunCam Nano 4 Camera.

EMAX TinyHawk III FPV Racing Drone BNF

        Size class: 76mm Weight (without battery): 32 grams Motors: TH0802 II 15000kv Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC Receiver:  SPI / FrSky D8/D16 Camera: RunCam Nano 4 Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.

Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF)

Self-improvement is a core trait for the engineers at EMAX, which is why when approached about a new successor to the Tinyhawk series, they designed the Tinyhawk III to build upon all the strengths of previous generations while improving any shortcomings. First is a drastically redesigned body frame centered around dur

Emax Tinyhawk 3 FPV Racing Drone - FrSky Bind N Fly (BNF)

EMAX Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF)

EMAX Tinyhawk III FPV Racing Drone - FrSky Bind N Fly (BNF) - RMRC

EMAX RTF TinyHawk III Ready to Fly Kit w/ Goggles, Radio Transmitter, Case and 76mm Racing Whoop Drone

Emax Tinyhawk 3 FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

Introducing... the&nbspEMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

Introducing... the EMAX TinyHawk III RTF Bundle!! This bundle features the EMAX TinyHawk III Quadcopter, EMAX E8 Transmitter, EMAX Transporter 2 Goggles, and RunCam Nano 4 Camera!

EMAX TinyHawk III FPV Racing Drone RTF Bundle

      Size class: 76mm Weight (without battery): 32 grams Motors: TH0802 II 15000kv Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC Receiver:  SPI / FrSky D8/D16 Camera: RunCam Nano 4 Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.    

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggles

EMAX Tinyhawk III FPV Racing Drone RTF with Controller/Goggl - RMRC

 

 
 
Size class: 76mm
Weight (without battery): 32 grams
Motors: TH0802 II 15000kv
Flight Controller / ESC: F4 STM32 (MATEKF411RX), 1-2S Input, 5A 4-in-1 BLHeli_S ESC
Receiver:  SPI / FrSky D8/D16
Camera: RunCam Nano 4
Video Transmitter: 25-100-200mw Switchable 37CH w/ Smart Audio.
 
 

Tinyhawk III FPV Racing Drone - Ready To Fly (RTF) w/ Controller and Goggles from WREKD Co.

EMAX BNF Babyhawk II Analog 3.5" Quadcopter

  LATEST PRODUCTION COMES EQUIPPED WITH RUNCAM RACER NANO 2, NOT RACER 5 AS PICTURED. LATEST PRODUCTION COMES EQUIPPED WITH RUNCAM RACER NANO 2, NOT RACER 5 AS PICTURED.

Babyhawk II - Analog - 3.5

EMAX BNF Nanohawk X Whoop

  Size: 115mm Weight: 41g Dry Battery Input: 1S XT30 5A ESC + F4 FC AIO 25-100-200mw Switchable VTX RunCam Nano 3 FPV Camera Includes: Nanohawk X BNF  450mAh 1S HV LiPo w/ XT30 Connector 6-Port 1S USB Charger 3x CCW 3x CW EMAX Avia NanoX 3” Propellers 2x JST 2.0 Male to XT30 Female Charging Adapters JST 2.0 Female to X

Nanohawk X Ultralight 3 Inch 1S Outdoor FPV Drone - FrSky BNF




 
Size: 115mm
Weight: 41g Dry
Battery Input: 1S XT30
5A ESC + F4 FC AIO
25-100-200mw Switchable VTX
RunCam Nano 3 FPV Camera

Includes:
Nanohawk X BNF 
450mAh 1S HV LiPo w/ XT30 Connector
6-Port 1S USB Charger
3x CCW 3x CW EMAX Avia NanoX 3” Propellers
2x JST 2.0 Male to XT30 Female Charging Adapters
JST 2.0 Female to XT30 Male Flight Battery Adapter
 
 
 
 

Nanohawk X Ultralight 3 Inch 1S Outdoor FPV Drone - FrSky BNF from WREKD Co.

Continual improvement is a goal we strive for at EMAX, with this goal leading us to the Nanohawk X, an incredibly small and lightweight outdoor racing drone, with incredible performance and flight times. Featuring a sleek design paired together with aircraft grade carbon fiber, the Nanohawk X retains an extremely light

Emax Nanohawk X Ultralight 1S FPV Racing Drone FrSky D8 BNF

EMAX Nanohawk X Ultralight 3 Inch 1S Outdoor FPV Drone FrSky - RMRC

EMAX Nanohawk X Ultralight 3 Inch 1S Outdoor FPV Drone FrSky BNF

EMAX BNF BabyHawk II HD 3.5" Quadcopter

BABYHAWK II HD REQUIRES DJI DIGITAL HD FPV SYSTEM GOGGLES FOR VIDEO TRANSMISSION, BABYHAWK II HD IS NOT COMPATIBLE WITH STANDARD 5.8GHZ ANALOG VIDEO RECEIVER. FOR ANALOG PLEASE SEE BABYHAWK II ANALOG VARIANT.   Optional 3D Printable Files: GoPro Mount GoPro Seat Insta360 Go Mount  Polar Camera Mount Standoffs  

Babyhawk II HD - 3.5

The Babyhawk II HD RTF is a superior and powerful drone that offers great performance and amazing HD video quality all in a 250g aircraft!  ow with Caddx Vista Polar.

EMAX BabyHawk II HD 3.5" Freestyle RTF w/ Caddx Polar Vista

EMAX BabyHawk II HD 3.5&quot Freestyle RTF w/ Caddx Polar Vista

Emax Babyhawk II HD Digital BNF reinventing FPV! Now available with the Nebula Pro camera! Check out our entire Emax Babyhawk II Collection, all our Digital BNF PNP RTFs and the rest of our Emax Products! For the ultimate lightweight HD footage add on the Insta360 GO 2 and 3D Printed mount! Recommended Battery: 850mAh 

Emax Babyhawk II HD Digital BNF w Caddx Vista + Nebula Pro Camera - Choose Receiver

Emax BabyHawk HD D8 Compatible Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesD8 Compatible BNFFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone FrSky D8 shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone FrSky D8 - RMRC

Babyhawk II HD 3.5&quot Micro Polar DJI FPV Drone FrSky D8

Emax BabyHawk HD PNP Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone PNP shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone PNP - RMRC

Babyhawk II HD 3.5&quot Micro DJI CADDX Polar Vista FPV Drone PNP

Emax BabyHawk HD TBS Crossfire Nano Race Edition is the perfect choice for your micro setup to had to your DJI FPV fleet!FeaturesHigh Speed power system featuring ECO 1404 3700kv and the Avan Scimitar PropsFC/ESC AIO - Mini Magnum Tower155mm Carbon Fiber FrameOnly weighs 139 gramsPre-tuned Betaflight Firmware for optimized flight performanceIntegrated Caddx Vista/polar CameraAccepts 3-4 cell LiPo batteriesTBS Crossfire Compatible BNFFRAMELight weight carbon fiber framePOWER SYSTEMPowered by the new Magnum Mini tower system with F4 STM32F411 4 in 1 25A BLHELI S ESC 3-4sClass leading Emax ECO 1404 3700kv brushless motors paired with the new Avan 3.5” tri blade propeller for maximum speed and control.

Babyhawk II HD 3.5" Micro DJI FPV Drone TBS Crossfire Nano shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Babyhawk II HD 3.5" Micro DJI FPV Drone TBS Crossfire Nano - RMRC

Babyhawk II HD 3.5&quot Micro DJI FPV Drone TBS Crossfire Nano

The Babyhawk II HD RTF is a superior and powerful drone that offers great performance and amazing HD video quality all in a 250g aircraft!  

EMAX BabyHawk II HD Freestyle RTF w/ Caddx Nebula Pro Digital HD System

EMAX RTF Tinyhawk II Freestyle Ready To Fly Kit - Googles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II Freestyle quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners and pros alike.

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II Freestyle quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying,

EMAX TinyHawk II Freestyle FPV Drone RTF Kit with Goggles and Controller

  * Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber * Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" * All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHe

Tinyhawk II Freestyle RTF Kit - With Controller & Goggles

Check out the brand new RTF from Emax! Introducing the brand new RE-INVENTED Tinyhawk II Freestyle COMBO!Includes Controller &amp; Goggles!!! See all parts for Tinyhawk II Freestyle! See the rest of our EMAX collection!  Frame: Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material

Emax Tinyhawk II Freestyle RTF Kit - With Controller & Goggles

EMAX BNF TinyHawk II Freestyle Quadcopter

The EMAX TinyHawk II is here and better than ever! Now with optimized motors at 1103 7000kv, and a new great look! To go along with that extra power, it comes installed on a newly designed carbon fiber airframe that promises to support all the torque the motors will put out.

The EMAX TinyHawk II is here and better than ever! Now with optimized motors at 1103 7000kv, and a new great look! To go along with that extra power, it comes installed on a newly designed carbon fiber airframe that promises to support all the torque

EMAX TinyHawk II Freestyle 2S Micro Brushless FPV Drone (FrSky BNF)



* Frame
Wheelbase: 115mm
Dry Weight: 49g
All Up Weight: 79g with 2x 450mAh 1S battery
Frame Material: Carbon Fiber


* Motors
Stator Size: 1103
Kv: 7000kv
Propeller Mount: T-mount, 1.5mm shaft
Propeller: Avan Rush 2.5&quot


* All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode**)
Battery Connector: JST-PH2.0 Duo


* FPV System
Ham radio license required for use in North America.
VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)*
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3&quot 700TVL CMOS
Smart Audio Connected


* Includes
1x Tinyhawk II Freestyle BNF
2x EMAX 450mAh 1S HV Battery
1x 1S USB LiPo Charger
1x Screwdriver + Hardware Kit

*Please note that even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Tinyhawk II Freestyle is set to stay at 25mW until you arm the motors.
 
** Be advised that this model is NOT compatible with the latest 2019+ FrSky ACCESS protocol transmitters without the use of FrSky&#39s external XJT module for ACCESS transmitters for D8 mode capability.
 
RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE

* Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber * Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" * All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli

Tinyhawk II Freestyle BNF from WREKD Co.

Tinyhawk II Freestyle BNF

Following the groundbreaking performance of the predecessor, comes the newly re-invented Tinyhawk 2 Freestyle, the perfect beginner outdoor quadcopter.By re-designing the frame to accept a higher quality camera (Runcam Nano),The FPV experience is enhanced, allowing newfound clarity when navigating the enviroment.Paired

Tinyhawk II Freestyle - FPV Drone F4 5A 7000KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 2S - FrSky BNF

EMAX BNF Tinyhawk II Racing Quadcopter

Emax took the already amazing Tinyhawk and made it the perfect micro indoor and outdoor racing drone by adding industry standard Runcam Nano 2 camera on an adjustable mount and higher output VTX up to 200mW with more filtering.Find parts and accessories in our TinyHawk 2 Collection! Frame: Wheelbase: 75mm Dry Weight: 3

EMAX Tinyhawk 2 racing Drone BNF With Runcam Nano2

Besides being a beginner-friendly, fun and micro-sized drone, EMAX's Tinyhawk II Race is a more performance-oriented outdoor 2S quadcopter. 

EMAX Tinyhawk II Race Micro Brushless FPV Drone w/ RunCam Nano 2 









 
 Frame
Wheelbase: 90mm
Dry Weight: 47.5g
All Up Weight: 73g with 2x 450mAh 1S battery
Frame Material: Polypropylene &ampamp Carbon Fiber
 

 Motors
Stator Size: 1103
Kv: 7500kv
Propeller Mount: T-mount
Propeller: Avan Blur 2&quot/span&ampgt
 

 All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode**)
Battery Connector: JST-PH2.0 Duo
 

 FPV System
Ham radio license required for use in North America.
VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)*
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3&quot 700TVL CMOS
Smart Audio Connected
 

 Includes
1x Tinyhawk II Race BNF
2x EMAX 450mAh 1S HV Battery
1x 1S USB LiPo Charger
1x Screwdriver + Hardware Kit
 
*Please note that even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Race is set to stay at 25mW until you arm the motors.
** Be advised that this model is NOT compatible with the latest 2019+ FrSky ACCESS protocol transmitters without the use of FrSky&#39s external XJT module for ACCESS transmitters for D8 mode capability.
 
RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE

   Frame Wheelbase: 90mm Dry Weight: 47.5g All Up Weight: 73g with 2x 450mAh 1S battery Frame Material: Polypropylene &amp; Carbon Fiber    Motors Stator Size: 1103 Kv: 7500kv Propeller Mount: T-mount Propeller: Avan Blur 2"/span&gt;    All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC

Tinyhawk II Race BNF from WREKD Co.

Tinyhawk II Race BNF

Tinyhawk II Race FPV Racing Drone F4 5A 7500KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 2S - BNF

EMAX has gone back to make what was already an amazing micro quadcopter even better, with a RunCam Nano 2 FPV Camera with adjustable tilt, higher power VTX, LEDs, and more powerful motors.

EMAX TinyHawk 2 Micro Brushless FPV Drone w/ RunCam Nano 2 (BNF)

EMAX RTF TinyHawk II  Ready to Fly Kit - Googles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

Great beginner RTF kit by EMAX! Comes with everything you need to rip! See our Tinyhawk II collection! Check out all our BNF-PNP-RTF quads and Emax collection!Recommended Batteries : 1S: GNB 1S 450MAH HIGH VOLTAGE 80C PH 2.0 GNB 1S 450MAH 80C PH 2.0. AULINE 450MAH HV 3.8V 1S LIPO 80C PH2.0 - 4PCS 2S: GNB 300MAH 2S 7.6V

EMAX TINYHAWK II RACING DRONE RTF WITH RUNCAM NANO2 RTF

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners and pros alike.

The RTF Bundle gives you everything you need to start flying in just minutes. Everything is included, goggles, radio, and of course the TinyHawk II quadcopter! This bundle is the perfect solution for anyone to learn the basic of FPV flying, beginners

EMAX TinyHawk II Micro Brushless FPV Drone (RTF Bundle)

Tinyhawk II 2 Indoor FPV Racing Drone F4 5A 16000KV RunCam Nano2 700TVL 37CH 25/100/200mW VTX 1S-2S - RTF

Tinyhawk II RTF Kit - With Controller & Goggles

Our TinyHawk II Freestyle RTF Bundle is the best way to get into FPV! The quality products in this bundle have been handpicked and pre-bound together by our team to give you the best micro experience.

EMAX TinyHawk II Freestyle 2S Micro FPV RTF Bundle w/ BETAFPV LiteRadio 2 + EMAX Transporter Goggles

EMAX RTF EZ Pilot Beginner Indoor Racing Quadcopter

EMAX EZ Pilot Beginner Indoor Racing Drone - RTF Check out all our Emax Products and the rest of our BNF/PNP/RTFs!         Features: - Real-time Hobby-grade First-Person-View (FPV) Video Transmission System - Gyroscopic Self-leveling with 3-modes from beginner to advanced - Smart Height Assist altitude control in begin

EMAX EZ Pilot Beginner Indoor Racing Drone - RTF

Just in time for the holidays, the EMAX EZ Pilot is the best way to start flying drones! The EZ Pilot has a built-in FPV camera that allows the user to fly first-person through the FPV goggles so you can feel like you are flying in the air! 

EMAX EZ Pilot - Beginner FPV Drone RTF Kit w/ FPV Goggles + Radio

EZ Pilot Beginner Indoor Racing Drone - RTF (PRE-ORDER)

EZ Pilot Beginner Indoor Racing Drone - With Controller & Goggle RTF

 


 
     
 
 
Features:
- Real-time Hobby-grade First-Person-View (FPV) Video Transmission System
- Gyroscopic Self-leveling with 3-modes from beginner to advanced
- Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode.
- EZ One Stick Control that mixes yaw and roll into one stick for simple, intuitive flight feel
- On-board FPV camera to experience flight from inside the aircraft
- 4 Minute flight time with included 450mah 1S battery
- Ergonomic Radio Controller and Comfort Fit FPV Virtual Reality Goggle included
 
 
 
 
 
Includes:
- 1x EZ-Pilot Indoor Drone
- 1x EZ-Pilot Controller (Proprietary Protocol, see Compatibility)
- 1x Transporter 5.8G FPV Goggles with 1x linear antenna included + second SMA port for upgrade/expansion
- 1x Transporter USB-rechargable 18650 Battery Pack
- 1x 450mah 1S 4.35V HV LiPo Battery
- 1x USB-powered 1S Charger
- 2x CW 2x CCW EZ Pilot Replacement Props
- 1x Micro USB Cable
- 1x EZ-Pilot Decal Customization Kit
 
 
 RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE
UPC: 691036971855

        Features: - Real-time Hobby-grade First-Person-View (FPV) Video Transmission System - Gyroscopic Self-leveling with 3-modes from beginner to advanced - Smart Height Assist altitude control in beginner modes with full manual throttle control in advanced mode. - EZ One Stick Control that mixes yaw and roll into o

EZ Pilot Beginner Indoor Racing Drone - With Controller & Goggle RTF from WREKD Co.

Happymodel

Happymodel BNF Mobula 6 V2 Micro Whoop

RaceDayQuads

All product containing lithium batteries must be shipped by a ground shipping method. Please be aware Betaflight 4.3.1 firmware has a bug, Please do not flash version 4.3.1.
This is the V2 version of the Mobula 6 HD. This version features an ICM20689 Gyro as well as an OpenVTX 400mW VTX.
The Highly sought after Mobula6 now comes in HD! Record all your sessions in HD with the onboard RunCam split 3 Lite.We recommend RDQ 1S 300mAh LiPos for this whoop! Be sure to check out all our pre-built quads, and all our Happymodel products! 

Features


AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless HD whoop only 27g
Come with Runcam Split3-lite 1080P HD DVR
Smooth and agile
Compatible for 1S Lipo/LIHV
Camera Angle adjustable

Specifications

Wheelbase: 65mm
Size: 80x80x40mm
Weight: 27g
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
Internal SPI DSM2/DSMX version(Compatible with SPEKTRUM DSM2/DSMX protocol radio transmitter)
External TBS CRSF NANO version(Compatible with TBS Transmitters)

 Motors

Model: EX0802 19000KV
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
Weight(g): 1.7g
No.of Cells(Lipo): 1S only

Flight Controller 

(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
(DSM2/X SPI RX version) CRAZYBEEX DXS  DSM2/X version firmware target: CrazybeeF4DXS
(External TBS CRSF NANO RX version) CRAZYBEE F4 Lite Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G 400mW VTX
Built-in SPI Frsky/Flysky/DSMX receiver
Built-in 5V 1A BEC
Built-in voltage detection

ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600

VTX

Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band Smart audio ready

Runcam Split3 Lite

Model: RunCam Split3-Lite
Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps
Video File Format: MOV
Image Resolution:2 MP
TV Mode: NTSC (720*480)/PAL (720*576) Switchable
Interface: JST 1.25mm / UART and SH 1.0mm
Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
Hole Distance of Installation: 25.5*25.5mm
PCB Size: 29*29mm
Lens Module Size: 14*14mm
Lens Specs: M9
Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)
Working Current: 450mA @5V

Includes

1x Happy Model BNF Mobula 6 HD 1S Whoop Quad - Choose Your RX


All product containing lithium batteries must be shipped by a ground shipping method. Please be aware Betaflight 4.3.1 firmware has a bug, Please do not flash version 4.3.1. This is the V2 version of the Mobula 6 HD. This version features an ICM20689 Gyro as well as an OpenVTX 400mW VTX. The Highly sought after Mobula6

HappyModel BNF Mobula6 HD V2 1S Analog Whoop Quad - Choose Your RX

Flywoo

Flywoo BNF CineRace20 V2 Neon LED 2" HD Cinewhoop

You have seen the CineRace20 before, but now coming back stronger than ever with the DJI O3 Air Unit. Inspired by RaceWhoop designed by Free Zillion, this is an elegant blending of CineWhoop and RaceWhoop! The CineRace20 O3 edition is currently the smallest cinewhoop of Flywoo that is equipped with the DJI O3 Air unit module, with a wheelbase of 93mm motor-to-motor. With the use of the soft TPU material to mount the camera to prevent the jello effect, by reducing the over all vibrations in the quad.
The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a  drone that can not only race but also capture stable videos and at the same time achieve a super long flight time! A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites.
Come see our Cinewhoop Collection and other great products from Flywoo!  
Features

Almost all parts are injection molded for a more sturdy and durable quad.
Very easy to disassemble, only fixed by two aluminum columns
Customizable with LEDs
GPS up to 30 satellites
Built-in SanDisk Extreme microSD card 128GB
Innovative duct design
Support 4K\60fps recording
Sub250 (even with battery)












Specifications


Input Voltage: 4S

Model: CineRace20 HD DJI O3 2inch 
Brand: FLYWOO
Frame: CineRace20 O3 (Different fromCineRace20 V1.2\V2 frame )
Charge connector: XT30
Motor: NIN V2 1203PRO 4850Kv

Propeller: D51-5 51mm 
Buzzer : 5PCS Active Alarm Buzzer 
GPS: GOKU GM10 Nano V3 GPS 
Weight: 139g (without battery)
Betaflight Firmware target: FLWO/FLYWOOF405S_AIO(SMT32F405)

Recommended Battery:Explorer 450mah 4S ( flight time  5mins ) Explorer 750mah 4S ( flight time  6mins ) 


GOKU GN F405S 20A AIO

Input Voltage: 2-6S Lipo
MCU: STM32F405 BGA

IMU: ICM42688
OSD: BetaFlight OSD 
Blackbox: 16Mb Flash
Baro: BMP280
BEC: 5V
6 hardware UARTS (UART1,2,3,4,5,6)

Onboard LED：4x WS2812
Support BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

FPV System

VTX: DJI O3 Air Unit (Requires DJI Goggles 2 or DJI FPV Goggles V2)
Channels: : Auto mode support Manual mode support: 40 MHz: 1 channel 20MHz: 3 channels 10MHz: 3channels
Camera: DJI O3 Air Unit Camera
VTX Antenna: DJI O3 Air Unit Antenna
BNF Variant Receiver: ExpressLRS 2.4GHz V2.2
PNP Variant: Built-in DJI receiver

Includes

1x CineRace20 HD DJI O3 
8x D51-5 props
2x Battery strap  9x150mm \ 9x200mm

1x Set of screws
1x SanDisk Extreme microSD Card 128GB
1x 90° USB Type-C 


You have seen the CineRace20 before, but now coming back stronger than ever with the DJI O3 Air Unit. Inspired by RaceWhoop designed by Free Zillion, this is an elegant blending of CineWhoop and RaceWhoop! The CineRace20 O3 edition is currently the smallest cinewhoop of Flywoo that is equipped with the DJI O3 Air unit 

Flywoo BNF CineRace20 HD V2 Neon LED 4S Cinewhoop w/ DJI O3 Air Unit - ELRS

FLYWOO

You have seen the CineRace20 before, but now coming back stronger than ever with the DJI O3 Air Unit. Inspired by RaceWhoop designed by Free Zillion, this is an elegant blending of CineWhoop and RaceWhoop! The CineRace20 O3 edition is currently the smallest cinewhoop of Flywoo that is equipped with the DJI O3 Air unit module, with a wheelbase of 93mm motor-to-motor. With the use of the soft TPU material to mount the camera to prevent the jello effect, by reducing the over all vibrations in the quad.
The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a  drone that can not only race but also capture stable videos and at the same time achieve a super long flight time! A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites.
Come see our Cinewhoop Collection and other great products from Flywoo!  
Features

Almost all parts are injection molded for a more sturdy and durable quad.
Very easy to disassemble, only fixed by two aluminum columns
Customizable with LEDs
GPS up to 30 satellites
Built-in SanDisk Extreme microSD card 128GB
Innovative duct design
Support 4K\60fps recording
Sub250 (even with battery)












Specifications


Input Voltage: 4S

Model: CineRace20 HD DJI O3 2inch 
Brand: FLYWOO
Frame: CineRace20 O3 (Different fromCineRace20 V1.2\V2 frame )
Charge connector: XT30
Motor: NIN V2 1203PRO 4850Kv

Propeller: D51-5 51mm 
Buzzer : 5PCS Active Alarm Buzzer 
GPS: GOKU GM10 Nano V3 GPS 
Weight: 139g (without battery)
Betaflight Firmware target: FLWO/FLYWOOF405S_AIO(SMT32F405)

Recommended Battery:Explorer 450mah 4S ( flight time  5mins ) Explorer 750mah 4S ( flight time  6mins ) 


GOKU GN F405S 20A AIO

Input Voltage: 2-6S Lipo
MCU: STM32F405 BGA

IMU: ICM42688
OSD: BetaFlight OSD 
Blackbox: 16Mb Flash
Baro: BMP280
BEC: 5V
6 hardware UARTS (UART1,2,3,4,5,6)

Onboard LED：4x WS2812
Support BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

FPV System

VTX: DJI O3 Air Unit (Requires DJI Goggles 2 or DJI FPV Goggles V2)
Channels: : Auto mode support Manual mode support: 40 MHz: 1 channel 20MHz: 3 channels 10MHz: 3channels
Camera: DJI O3 Air Unit Camera
VTX Antenna: DJI O3 Air Unit Antenna
BNF Variant Receiver: ExpressLRS 2.4GHz V2.2
PNP Variant: Built-in DJI receiver

Includes

1x CineRace20 HD DJI O3 
8x D51-5 props
2x Battery strap  9x150mm \ 9x200mm

1x Set of screws
1x SanDisk Extreme microSD Card 128GB
1x 90° USB Type-C 


You have seen the CineRace20 before, but now coming back stronger than ever with the DJI O3 Air Unit. Inspired by RaceWhoop designed by Free Zillion, this is an elegant blending of CineWhoop and RaceWhoop! The CineRace20 O3 edition is currently the smallest cinewhoop of Flywoo that is equipped with the DJI O3 Air unit 

Flywoo BNF CineRace20 HD V2 Neon LED 4S Cinewhoop w/ DJI O3 Air Unit - ELRS 2.4

Flywoo BNF CineRace20 HD V2 Neon LED 4S Cinewhoop w/ DJI O3 Air Unit -

Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a  drone that can not only race but also capture stable videos and at the same time achieve a super long flight time! A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites. You will see on the front of the quad Flywoo engineer the use of the soft TPU material to mount the camera to prevent the jello effect, by reducing the over all vibrations in the quad.
Come see our  Cinewhoop Collection and other great products from Flywoo!
We also carry a version with the O3 Air Unit already installed here.
Features

Almost all parts are injection molded for a more sturdy and durable quad.
Very easy to disassemble, only fixed by two aluminum columns
Customizable with LEDs
GPS up to 30 satellites
Innovative duct design
Sub250 (even with battery)











Specifications


Input Voltage: 4S

Model: CineRace20 HD DJI O3 2inch (without Air Unit)
Brand: FLYWOO
Frame: CineRace20 O3 (Different fromCineRace20 V1.2\V2 frame )
Charge connector: XT30
Motor: NIN V2 1203PRO 4850Kv

Propeller: D51-5 51mm 
Buzzer : 5PCS Active Alarm Buzzer 
GPS: GOKU GM10 Nano V3 GPS 
Weight: 139g (without battery)
Betaflight Firmware target: FLWO/FLYWOOF405S_AIO(SMT32F405)

Recommended Battery:Explorer 450mah 4S ( flight time  5mins ) Explorer 750mah 4S ( flight time  6mins ) 


GOKU GN F405S 20A AIO

Input Voltage: 2-6S Lipo
MCU: STM32F405 BGA

IMU: ICM42688 

OSD: BetaFlight OSD 
Blackbox: 16Mb Flash
Baro: BMP280
BEC: 5V
6 hardware UARTS (UART1,2,3,4,5,6)

Onboard LED：4x WS2812
Support BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

FPV System

Add your own O3 Air Unit

Includes

1 x Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP
8 x D51-5 props
2 x Battery strap  9x150mm \ 9x200mm

1 x Set of screws
1 x 90° USB Type-C 



Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card. The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a  drone that can not only race but also capture stable vi

Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP

**Please note: This version without vista HD system . You need to install it yourself. Everything else has been installed and tested. Recommended: Caddx Nebula Pro Nano vista  Caddx Polar Nano Vista MAIN CHANGELOG  :  Upgraded 1203Pro 3400KV to 1203Pro 4850KV . Same flight time more power Add Buzzer. Low voltage alarm 

CineRace20 V2 Neon Led DJI HD 2inch (without Caddx Vista HD System

CineRace20 V2 Neon Led DJI HD  2inch (without Caddx Vista HD System

The&nbspFlywoo CineRace20 HD&nbspnow features&nbspNeon LEDs!&nbspThe CineRace20 V2 has now&nbspupgraded from 3400kv to 4850kv motors for same flight time, but more power. Added buzzer, and low voltage alarm.

The Flywoo CineRace20 HD now features Neon LEDs! The CineRace20 V2 has now upgraded from 3400kv to 4850kv motors for same flight time, but more power. Added buzzer, and low voltage alarm.

Flywoo CineRace20 V2 Neon LED 2" 4S HD CineWhoop w/ Caddx Polar Nano Vista

Flywoo CineRace20 V2 Neon LED 2&quot 4S HD CineWhoop w/ Caddx Polar Nano Vista

Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP from WREKD Co.

EMAX RTF Tinyhawk III Plus Analog Freestyle Kit - ELRS 2.4GHz

All products containing batteries must be shipped by a ground shipping method.
Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5" propellers for exceptional grip and thrust. Durability is elevated with an upgraded 3K Carbon Fiber-blend frame. The analog system is optimized for signal strength and stability so that you can fly with confidence in challenging environments.  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Freestyle Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!



Specifications
TINYHAWK 3 PLUS FREESTYLE ANALOG BNF

Wheelbase: 110mm

Weight: 62.5g

Motor: 12025 7000KV

Propellers: AVAN Rush 2.5

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Freestyle Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5" propellers for exceptional grip and thrust. Durability is elevated with an upgraded 3K Carbon Fiber-blend frame. The analog system is optimized for signal strength and stability, so you can fly with confidence in challenging environments. The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision. This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Freestyle Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2 EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware. Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications TINYHAWK 3 PLUS FREESTYLE ANALOG BNF Wheelbase: 110mm Weight: 62.5g Motor: 12025 7000KV Propellers: AVAN Rush 2.5 Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G) Camera: Runcam Nano VTX: 32Bit 40Ch 0/25mW/100mW/400mW Battery: 1S 650mAh E8 TRANSMITTER (ELRS-2.4G) Dimensions: LxWxH=150x140x45mm Weight: 260g Channels: 8 Protocol: ELRS 2.4G Band: 2.4gHz（2400-2483.5MHz） Power Levels: 10mW/25mW/50mW/100mW Battery: 800mAh 18650 Charging: USB-C 1A Recommended Operating Voltage: 3.7-4.2V Input: Type-C, 3.5mm TRANSPORTER 2 ANALOG GOGGLES Dimensions: LxWxH=155x100x90mm Weight: 398g Screen Resolution: 480x800 Screen Size: 4.3 Inch Battery: 1300mAh Integrated Operating Voltage: 3.7V-4.2V Band: 5.8GHz（5658-5945MHz） Charging: USB-C 1A Recommended DVR: 32GB Micro SD Recommended Modes: VGA/D1 Includes 1x Tinyhawk 3 Plus Freestyle Analog BNF 1x EMAX E8 Transmitter (ELRS-2.4G) 1x EMAX Transporter 2 Analog Goggles 2x EMAX 1S HV 650mAh Battery 1x Hardware Kit 1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW) 1x USB Battery Charger 1x Monitor to Transmitter Mounting Kit

EMAX RTF Tinyhawk III Plus Freestyle Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, and Drone

EMAX RTF Tinyhawk III Plus Freestyle Ready-to-Fly ELRS 2.4GHz Analog K

The EMAX Tinyhawk III Plus Freestyle Analog Bundle is your gateway to an exhilarating FPV drone experience.

EMAX TinyHawk III Plus Freestyle RTF Bundle - Analog w/ Goggles + Radio

All products containing batteries must be shipped by a ground shipping method. Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5" propellers for e

EMAX RTF Tinyhawk III Plus Freestyle Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

EMAX Tinyhawk 3 Plus Freestyle Analog RTF Drone with RC/GogglesIMPROVEMENTEmbark on the future of outdoor FPV quadcopters with the all-new Tinyhawk III Plus Freestyle, tailor-made for those ready to embrace the excitement of outdoor drone flights.INCREDIBLE DURABILITYCrafted from an upgraded aerospace-grade 3k woven carbon fiber blend, durability reaches new heights. This advanced blend ensures the Tinyhawk III Plus Freestyle can confidently endure high-impact situations while maintaining its lightweight agility. The frame proudly displays an eye-catching designer pattern, setting it apart with its unique charm.IMPROVED VTXWith increased transmission power, the Tinyhawk III Plus Freestyle punches through interference and obstacles with ease. You&#39ll experience a more robust signal, allowing you to fly with confidence even in challenging environments. Our engineers have fine-tuned the analog system to optimize signal strength while maintaining stability, so you can f...

EMAX Tinyhawk 3 Plus Freestyle Analog RTF Drone - RMRC

EMAX Tinyhawk 3 Plus Freestyle Analog RTF Drone with RC/Goggles

EMAX RTF Tinyhawk III Plus Analog Whoop - 2.4GHz ELRS

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

1x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV! The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision. This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2 EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware. Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications TINYHAWK 3 PLUS ANALOG Wheelbase: 76mm Weight: 32.5g Motor: TH0802 II - 15000KV Propellers: Avia Tinyhawk Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G) Camera: Runcam Nano VTX: 32Bit 40Ch 0/25mW/100mW/400mW Battery: 1S 650mAh E8 TRANSMITTER (ELRS-2.4G) Dimensions: LxWxH=150x140x45mm Weight: 260g Channels: 8 Protocol: ELRS 2.4G Band: 2.4gHz（2400-2483.5MHz） Power Levels: 10mW/25mW/50mW/100mW Battery: 800mAh 18650 Charging: USB-C 1A Recommended Operating Voltage: 3.7-4.2V Input: Type-C, 3.5mm TRANSPORTER 2 ANALOG GOGGLES Dimensions: LxWxH=155x100x90mm Weight: 398g Screen Resolution: 480x800 Screen Size: 4.3 Inch Battery: 1300mAh Integrated Operating Voltage: 3.7V-4.2V Band: 5.8GHz（5658-5945MHz） Charging: USB-C 1A Recommended DVR: 32GB Micro SD Recommended Modes: VGA/D1 Includes 1x Tinyhawk 3 Plus Analog BNF 1x EMAX E8 Transmitter (ELRS-2.4G) 1x EMAX Transporter 2 Analog Goggles 2x EMAX 1S HV 650mAh Battery 1x Hardware Kit 1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW) 1x USB Battery Charger 1x Monitor to Transmitter Mounting Kit

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, and Drone

EMAX RTF Tinyhawk III Plus Whoop Ready to Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

Emax

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers&#39 feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


All products containing batteries must be shipped by a ground shipping method. The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the idea

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone from WREKD Co.

EMAX RTF Tinyhawk III Plus Whoop Ready-to-Fly ELRS 2.4GHz Analog Kit w/ Goggles, Radio Transmitter, Batteries, Charger, Case and Drone

All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology. This is truly the ideal way to try out FPV!  
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus Analog BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 Analog Goggles, 2  EMAX 1S HV 650mAh battery, USB Battery charger prop, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!




Specifications
TINYHAWK 3 PLUS ANALOG

Wheelbase: 76mm

Weight: 32.5g

Motor: TH0802 II - 15000KV

Propellers: Avia Tinyhawk

Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)

Camera: Runcam Nano

VTX: 32Bit 40Ch 0/25mW/100mW/400mW

Battery: 1S 650mAh

E8 TRANSMITTER (ELRS-2.4G)

Dimensions: LxWxH=150x140x45mm

Weight: 260g

Channels: 8

Protocol: ELRS 2.4G

Band: 2.4gHz（2400-2483.5MHz）

Power Levels: 10mW/25mW/50mW/100mW

Battery: 800mAh 18650

Charging: USB-C 1A Recommended

Operating Voltage: 3.7-4.2V

Input: Type-C, 3.5mm

TRANSPORTER 2 ANALOG GOGGLES

Dimensions: LxWxH=155x100x90mm

Weight: 398g

Screen Resolution: 480x800

Screen Size: 4.3 Inch

Battery: 1300mAh Integrated

Operating Voltage: 3.7V-4.2V

Band: 5.8GHz（5658-5945MHz）

Charging: USB-C 1A Recommended

DVR: 32GB Micro SD Recommended Modes: VGA/D1

Includes

1x Tinyhawk 3 Plus Analog BNF

1x EMAX E8 Transmitter (ELRS-2.4G)

1x EMAX Transporter 2 Analog Goggles

2x EMAX 1S HV 650mAh Battery

1x Hardware Kit

1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)

1x USB Battery Charger

1x Monitor to Transmitter Mounting Kit


The EMAX Tinyhawk III Plus Analog Bundle is your gateway to an exhilarating FPV drone experience.&nbsp

The EMAX Tinyhawk III Plus Analog Bundle is your gateway to an exhilarating FPV drone experience. 

EMAX TinyHawk III Plus RTF Bundle - Analog w/ Goggles + Radio

EMAX BNF Tinyhawk III Plus Analog Whoop - 2.4GHz ELRS

EMAX Tinyhawk III Plus HDZero Bind-N-Fly BNF ELRS