FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Propeller Pitch (in)

Propeller Length (in)

EMAX

EMAX Avia NanoX Bi-Blade 3" Prop

The EMAX Avia NanoX props where designed for light and quick rippers like the Nanohawk X. But that doesn't mean that these props aren't perfect for your next build as well.
Check out the rest of our 3" props, and all our EMAX selection!
Specifications

Diameter: 3"
Blades: 2

Material: Polycarbonate
Hub Thickness: 5mm
Shaft Hole: 1.5mm
Weight: 0.7g

Includes

4x EMAX Avia Nano X Bi-Blade 3" Prop


The EMAX Avia NanoX props where designed for light and quick rippers like the Nanohawk X. But that doesn't mean that these props aren't perfect for your next build as well.

EMAX Avia NanoX Bi-Blade 3" Prop 4 Pack for Nanohawk X

EMAX Avia NanoX Bi-Blade 3" Prop 4 Pack for Nanohawk X - For Sale At RaceDayQuads

Replacement propellers for the EMAX Nanohawk X 3" Ultralight drone, or fits any craft with 1.5mm T-mounting. Lightweight yet durable design provides an even balance for freestyle flight or endurance long range performance.

EMAX Avia NanoX 3 Inch Propeller - RED - 2CW 2CCW

Replacement prop for the Emax Nanohawk X or similar 3" drones.Check out the Emax Nanohawk X Accessories, all our 3" Propellers and the rest of our Emax Collection! Specifications Diameter: 3" Blades: 2 Material: Polycarbonate Hub Thickness: 5mm Shaft Hole: 1.5mm Weight: 0.7g Includes 1x EMAX Avia NanoX Bi-Blade 3" Prop

EMAX Avia NanoX Bi-Blade 3

RaceDayQuads

The EMAX Avia NanoX props where designed for light and quick rippers like the Nanohawk X. But that doesn't mean that these props aren't perfect for your next build as well.

Specifications

Diameter: 3"
Blades: 2

Material: Polycarbonate
Hub Thickness: 5mm
Shaft Hole: 1.5mm
Weight: 0.7g

Includes

4x EMAX Avia Nano X Bi-Blade 3" Prop


The EMAX Avia NanoX props where designed for light and quick rippers like the Nanohawk X. But that doesn't mean that these props aren't perfect for your next build as well. Specifications Diameter: 3" Blades: 2 Material: Polycarbonate Hub Thickness: 5mm Shaft Hole: 1.5mm Weight: 0.7g Includes 4x EMAX Avia Nano X Bi-Bla

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Propeller Blades

EMAX Avia Nanohawk 1210 31mm Quad-Blade Prop




This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop!  Also, these props are a great choice for your own whoops!


Check out all our Micro Props as well as the rest of our EMAX selection!




Includes

1x Emax Nanohawk 1210 Quad-Blade 31mm Micro/Whoop Prop 4 Pack (1mm Shaft)


This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop!  Also, these props are a great choice for your own whoops! Check out all our Micro Props as well as the rest of our EMAX selection! Includes 1x Emax Nanohawk 1210 Quad-Blade 31mm Micro/Whoop Prop 4 Pack (1mm Shaft)

Emax Nanohawk 1210 Quad-Blade 31mm Micro/Whoop Prop 4 Pack (1mm Shaft)




This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop!  Also, these props are a great choice for your own whoops!







Includes

1x Emax Nanohawk 1210 Quad-Blade 31mm Micro/Whoop Prop 4 Pack (1mm Shaft)


This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop!  Also, these props are a great choice for your own whoops! Includes 1x Emax Nanohawk 1210 Quad-Blade 31mm Micro/Whoop Prop 4 Pack (1mm Shaft)

4 CW and 4 CCW replacement propellers for NanoHawk.

Avia Nanohawk 1210 31mm 4-Blade Propeller (2 Sets)

Replacement or spare&nbsp1210 31mm 4-Blade Propellers for the&nbspEMAX Nanohawk 1S Micro Brushless FPV Drone.&nbsp

Replacement or spare 1210 31mm 4-Blade Propellers for the EMAX Nanohawk 1S Micro Brushless FPV Drone. 

EMAX Avia Nanohawk 1210 31mm 4-Blade Propeller (8pcs) 

Emax Avia 1210 31mm 4-Blade Propellers for your EMAX Nanohawk! Debuting with the Nanohawk is the new Avia Series of propellers, redefining aerial performance with new design goals. With the Avia NanoHawk propeller, maximum thrust is achieved while maintaining an optimized throttle curve throughout the motor's performan

Emax Avia Nanohawk 1210 31mm 4-Blade Propeller - 2 Sets

EMAX EZ Pilot 40mm Quad-Blade Micro/Whoop Prop

Replacement set of 40mm propellers for EZ Pilot drone.Set contains 2 clockwise and 2 counter-clockwise propellers.

EZ Pilot Replacement 40mm Propeller Set

Replacement part for the EMAX EZ Pilot.

Includes

4x EMAX EZ Pilot 40mm Quad-Blade Micro/Whoop Prop (2 CW, 2 CCW)


Replacement part for the EMAX EZ Pilot. Includes 4x EMAX EZ Pilot 40mm Quad-Blade Micro/Whoop Prop (2 CW, 2 CCW)

EMAX EZ Pilot 40mm Quad-Blade Micro/Whoop Prop 4 Pack

Replacement set of 40mm propellers for EZ Pilot drone. Set contains 2 clockwise and 2 counter-clockwise propellers.  Check out the EZ RTF Beginner indoor racing kit!  

Replacement part for the EMAX EZ Pilot.
Check out all our EMAX products and the rest of our micro/whoop props.
Includes

4x EMAX EZ Pilot 40mm Quad-Blade Micro/Whoop Prop (2 CW, 2 CCW)


Replacement part for the EMAX EZ Pilot. Check out all our EMAX products and the rest of our micro/whoop props. Includes 4x EMAX EZ Pilot 40mm Quad-Blade Micro/Whoop Prop (2 CW, 2 CCW)

EMAX Avan Scimitar 3.5x2.8x3 Tri-Blade 3.5" Prop

With the success of the Avan Scimitar 4 and 5 inch propellers, EMAX sought out to release a unique prop into the industry that will encourage pilots to build with new motor and prop combinations. The Avan Scimitar 3.5x2.8x3 comes in at a featherlight 1.8 grams for optimal efficiency and response. EMAX's hub system is d

Avan Scimitar 3.5x2.8x3 3528-3 Propeller 2CW+2CCW Red

With the success of the Avan Scimitar 4 and 5 inch propellers, EMAX sought out to release a unique prop into the industry that will encourage pilots to build with new motor and prop combinations.The Avan Scimitar 3.5x2.8x3 comes in at a featherlight 1.8 grams for optimal efficiency and response. Specs:- Mounts to T-mount motors.- 1.9g- 3.5 Inch Diameter- 2.8 Inch Pitch- 3 Blade

EMAX Avan Scimitar 3.5x2.8x3 3528-3 Propeller 2CW+2CCW Red shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

EMAX Avan Scimitar 3.5x2.8x3 3528-3 Propeller 2CW+2CCW Red - RMRC

EMAX Avan Scimitar 3.5x2.8x3 3528-3 Propeller 2CW+2CCW Red

EMAX Avan Scimitar 4x2.8x3 Tri-Blade 4" Prop

Geometry:4 inch diameter2.8 inch pitch3 blades

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

EMAX Avan Scimitar 4x2.8x3 4028-3 Propeller Red - RMRC

EMAX Avan Scimitar 4x2.8x3 4028-3 Propeller Red

Avan Scimitar 4x2.8x3 4028-3 Propeller 2CW+2CCW Red

Replacement props for the EMAX BabyHawk R Pro 4" or any other high performance 4" build. 
Be sure to check out all our 4" props, and all our EMAX gear!
Specifications

Diameter: 4"
Pitch: 2.8"
Blades: 3
Material: Polycarbonate
Weight: 3g

Includes

4x EMAX Avan Scimitar 4x2.8x3 Tri-Blade 4" Prop (2 CW, 2 CCW)


Replacement props for the EMAX BabyHawk R Pro 4" or any other high performance 4" build.  Be sure to check out all our 4" props, and all our EMAX gear! Specifications Diameter: 4" Pitch: 2.8" Blades: 3 Material: Polycarbonate Weight: 3g Includes 4x EMAX Avan Scimitar 4x2.8x3 Tri-Blade 4" Prop (2 CW, 2 CCW)

EMAX Avan Scimitar 4x2.8x3 Tri-Blade 4" Prop 4 Pack

EMAX Avan Scimitar 4x2.8x3 Tri-Blade 4

EMAX Avan Scimitar 4x2.4x3 Tri-Blade 4" Prop

Geometry:4 inch diameter2.4 inch pitch3 blades

EMAX Avan Scimitar 4x2.4x3 4024-3 Propeller Red - RMRC

EMAX Avan Scimitar 4x2.4x3 4024-3 Propeller Red

Avan Scimitar 4x2.4x3 4024-3 Propeller 2CW+2CCW Red

EMAX Avan Scimitar 5x3x3 Tri-Blade 5" Prop

Of the new Scimitar line from EMAX, the 3.0 is the most durable, most aggressively pitched. If you want more speed with insane durability to handle high powered motors, this is the prop to go for. This is a great choice for hard flying freestyle. The ultimate basher prop. There is no perfect prop. Check out the other Scimitar options, try some out and see how they suit your build and flying style.
Be sure to check out all our 5" props, and all our EMAX gear!

Features

Aggressive Pitch
Highly Durable

Specifications

Diameter: 5"
Pitch: 3"
Blades: 3
Moment of Inertia: 24.1 g*cm^2
Material: Polycarbonate
Weight: 5.4g

 Includes

4x EMAX Avan Scimitar 5x3x3 Tri-Blade 5" Prop (2 CW, 2 CCW)


Of the new Scimitar line from EMAX, the 3.0 is the most durable, most aggressively pitched. If you want more speed with insane durability to handle high powered motors, this is the prop to go for. This is a great choice for hard flying freestyle. The ultimate basher prop. There is no perfect prop. Check out the other S

EMAX Avan Scimitar 5x3x3 Tri-Blade 5" Prop 4 Pack

EMAX Avan Scimitar 5x3x3 Tri-Blade 5

Avan Scimitar is the new prop line from EMAX,comes in multiple variants to suite evry flying style.Check the full Scimitar line HERE. Features Aggressive Pitch Highly Durable Specifications Diameter: 5" Pitch: 3" Blades: 3 Moment of Inertia: 24.1 g*cm^2 Material: Polycarbonate Weight: 5.4g  Includes 4x EMAX Avan Scimit

Avan Scimitar 5x3x3 (2CW+2CCW) 5030-3 Red

Avan Scimitar 5x3.0x3 5030-3 Propeller 2CW+2CCW Red

Great performance from the EMAX Avan Scimitar series!The 4x3.0x3 is a durable prop with the most aggressive pitch of the series. If you want more speed with insane durability to handle the power, this is the prop to go for. With a thickened design, this is the ultimate basher propeller.Tech Specs:5 inch diameter3.0 inch pitch3 bladesweight: 5.4 grams

High performance freestyle and racing propeller for your FPV Drone. Great EMAX quality shipped from the leaders in FPV and drones, RMRC! 

EMAX Avan Scimitar 5x3.0x3 5030-3 Propeller 2CW+2CCW Red - RMRC

EMAX Avan Scimitar 5x3.0x3 5030-3 Propeller Red

EMAX Avan Scimitar 5x2.8x4 Quad-Blade 5" Prop

Avan Scimitar is the new prop line from EMAX,comes in multiple variants to suite evry flying style.Check the full Scimitar line HERE. Features Super Grippy Maximum Control Specifications Diameter: 5" Pitch: 2.8" Blades: 4 Material: Polycarbonate Weight: 6.2g  Includes 4x EMAX Avan Scimitar 5x2.8x4 Quad-Blade 5" Prop (2

Avan Scimitar 5x2.8x4 (2CW+2CCW) 5028-4 Red

Avan Scimitar 5x2.8x4 5028-4 Propeller 2CW+2CCW Red

Great performance from the EMAX Avan Scimitar series!The 5x2.8x4 is set out to prove that quad blades do not mean &quothigh amp draw.&quot Using the scimitar 2.8 design, this prop is balanced between each of the props with the addition of a super grippy design. If you prefer maximum control and grip in your racing or freestyle drone, this is the prop for you.Tech Specs:5 inch diameter2.8 inch pitch4 bladesweight: 6.2 grams

Avan Scimitar 5x2.8x4 5028-4 Propeller 2CW+2CCW Red - RMRC

EMAX Avan Scimitar 5x2.8x4 5028-4 Propeller Red

Of the new Scimitar line from EMAX, the 2.8 Quad-Blade set out to produce that quad blades do not mean "high amp draw." Using the Scimitar 2.8 design, this prop is a balance between each of the props with the addition of a super grippy design. If you prefer maximum control and grip in your racing or freestyle drone, this is the prop for you. There is no perfect prop. Check out the other Scimitar options, try some out and see how they suit your build and flying style.
Be sure to check out all our 5" props, and all our EMAX gear!

Features

Super Grippy
Maximum Control

Specifications

Diameter: 5"
Pitch: 2.8"
Blades: 4
Material: Polycarbonate
Weight: 6.2g

 Includes

4x EMAX Avan Scimitar 5x2.8x4 Quad-Blade 5" Prop (2 CW, 2 CCW)


Of the new Scimitar line from EMAX, the 2.8 Quad-Blade set out to produce that quad blades do not mean "high amp draw." Using the Scimitar 2.8 design, this prop is a balance between each of the props with the addition of a super grippy design. If you prefer maximum control and grip in your racing or freestyle drone, th

EMAX Avan Scimitar 5x2.8x4 Quad-Blade 5" Prop 4 Pack

EMAX Avan Scimitar 5x2.8x4 Quad-Blade 5

EMAX Avan Scimitar 5x2.8x3 Tri-Blade 5" Prop

Great performance from the EMAX Avan Scimitar series!The 5x2.8x3 is the baseline prop. If you aren&#39t sure what you like, or you want something that is a combination of durability, flight time, and sped, this is the prop to go for. This will be breat for both freestylers or racers looking for a good middle ground.Tech Specs:Geometry: 5 inch diameter 2.8 inch pitch 3 bladesWeight: 3.90 gramsMoment of Inertia: 24.1 g*cm^2

EMAX Avan Scimitar 5x2.8x3 5028-3 Propeller 2CW+2CCW Red - RMRC

EMAX Avan Scimitar 5x2.8x3 5028-3 Propeller Red

Avan Scimitar is the new prop line from EMAX,comes in multiple variants to suite evry flying style.Check the full Scimitar line HERE. Features The baseline prop of the Scimitar Series Balance of durability, flight time and speed Specifications Diameter: 5" Pitch: 2.8" Blades: 3 Moment of Inertia: 24.1 g*cm^2 Material: 

Avan Scimitar 5x2.8x3 (2CW+2CCW) 5028-3 Red

Avan Scimitar 5x2.8x3 5028-3 Propeller 2CW+2CCW Red

EMAX Avan Scimitar 5x2.6x3 Tri-Blade 5" Prop

Great performance from the EMAX Avan Scimitar series!The AVAN Scimitar 5x2.6x3 is designed for freestyle oriented flying. This propeller is designed for higher KV motors for maximum response with a low pitch design, or for medium KV motors to maximize flight timesTech Specs:5 inch diameter2.6 inch pitch3 bladesweight: 4.16 gramsMoment of Inertia: 26.4 g*cm^2

EMAX Avan Scimitar 5x2.6x3 (2CW+2CCW) Propeller 5026-3 Red - RMRC

EMAX Avan Scimitar 5x2.6x3 Propeller 5026-3 Red

Avan Scimitar is the new prop line from EMAX,comes in multiple variants to suite evry flying style.Check the full Scimitar line HERE.Avan Scimitar 5x2.6x3 (2CW+2CCW) 5026-3 Red. This is also used in the EMAX Buzz BNF as a light weight easy to fly propeller. Giving power and efficiency in flight. Specifications Diameter

Avan Scimitar 5x2.6x3 (2CW+2CCW) 5026-3 Red

EMAX Avan Blur 2x1.9x3 Tri-Blade 2" Prop

The Emax Avan Blur propeller 2x1.9x3 was designed for the Babyhawk Race 2 inch to maximize flight time and durability of the propeller without losing performance.

EMAX AVAN Blur 2x1.9x3 Propeller




The Emax Avan Blur propeller 2x1.9x3 was designed for Babyhawk Race 2 inch to maximize flight time and durability of the propeller without losing performance. This propeller is matched to Emax 1106 6000kv on 3s and 4s.  A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Blur weighs 1.1 grams. Utilizing thicker airfoils greatly increases durability and stiffness. The hub diameter is also increased to thicken the root chord maximizing durability. Most of the weight is centralized near the hub creating a low moment of inertia of 0.77  grams*square centimeter which in turn makes a very responsive prop. The Avan Blur was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.
Be sure to check out all our 2" props, and all our EMAX gear!
Specifications

2 inch diameter
1.9 inch pitch
3 blades
weight: 1.1 grams
Moment of Inertia: 0.77 g*cm^2

Includes

4x EMAX Avan Blur 2x1.9x3 Tri-Blade 2" Prop (2CW, 2CCW)





The Emax Avan Blur propeller 2x1.9x3 was designed for Babyhawk Race 2 inch to maximize flight time and durability of the propeller without losing performance. This propeller is matched to Emax 1106 6000kv on 3s and 4s.  A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while

EMAX Avan Blur 2x1.9x3 Tri-Blade 2" Prop 4 Pack - Red

EMAX Avan Blur 2x1.9x3 Tri-Blade 2

Get increased flight times and durability without sacrificing performance with the Emax Avan Blue 2" prop. This was designed for the BabyHawk Race 2 Inch drone.

Emax Avan Blur 2" Prop for Sale - RaceDayQuads

AVAN Blur 2 Inch Prop

AVAN Blur 2 Inch Prop Pre-order AVAN Blur 2 inch prop

EMAX Avan Rush 2.5x1.9x3 Tri-Blade 2.5" Prop

The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s.  A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Utilizing thicker airfoils greatly increases durability and stiffness. Most of the weight is centralized near the hub creating a low moment of inertia of 1.24  grams*square centimeter which in turn makes a very responsive prop. The Avan Rush was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.
AVAN Rush 2.5 inch prop (2xCW 2xCCW) 1 set kit
Geometry:2.5 inch diameter1.9 inch pitch3 bladesInertial Properties:weight: 1.4 gramsMoment of Inertia: 1.24 g*cm^2
 


The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s.  A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high sp

EMAX Avan Rush 2.5x1.9x3 Tri-Blade 2.5" Prop 4 Pack - Choose Your Color

EMAX Avan Rush 2.5x1.9x3 Tri-Blade 2.5

AVAN Rush 2.5 Inch Prop AVAN Rush 2.5 inch prop Red

AVAN Rush 2.5 Inch Prop - RED

The Emax AVAN Rush 2.5" Prop is the latest innovation in the 2.5" quad category. Designed for the BabyHawk, this propeller has amazing speed and performance!

Emax AVAN Rush 2.5" Prop for Sale - RaceDayQuads

The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race 2.5 inch conversion kit to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s.  A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while

AVAN Rush 2.5 Inch Prop

The Emax Avan Rush propeller 2.5x1.9x3 was designed for the Babyhawk Race 2.5 inch conversion kit to maximize performance and flight time.

EMAX AVAN Rush 2.5x1.9x3 Propeller (Set of 4)

EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop

Geometry: 3 inch diameter 2.4 inch pitch 3 blades   Inertial Properties: weight: 1.25 grams Moment of Inertia: 3.05 g/cm^2   The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight. A true 2.4"

AVAN MINI 3 INCH PROPELLER 3X2.4X3 6XCCW 6XCW 3 SETS

Geometry:
3 inch diameter
2.4 inch pitch
3 blades

Inertial Properties:
weight: 1.25 grams
Moment of Inertia: 3.05 g/cm^2


The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight.  A true 2.4" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 3.05  grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable.

The Avan Mini was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.

A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.

Geometry: 3 inch diameter 2.4 inch pitch 3 blades Inertial Properties: weight: 1.25 grams Moment of Inertia: 3.05 g/cm^2 The Emax Avan Mini propeller 3×2.4×3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight.  A true 2.4″ pitch [...]

AVAN Mini 3 inch Propeller 3x2.4x3 6xCCW 6xCW 3 sets - GEPRC

AVAN Mini 3 inch Propeller 3x2.4x3 6xCCW 6xCW 3 sets


EMAX has blessed us with another solid addition to our ever-growing selection of 2'' - 3'' gear!  The Babyhawk series is a great selection for micro spec class racing so when you need to practice hard, you are going to need those extra props.

 

The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight.  A true 2.4" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 3.05  grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable.  
 
The Avan Mini was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.
 
A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.


Be sure to check out all our 3" props, and all our EMAX gear!

Specifications


3 inch diameter
2.4 inch pitch
3 blades
Weight: 1.25 grams
Moment of Inertia: 3.05 g/cm^2

Includes

12x EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop (6CW, 6CCW)




EMAX has blessed us with another solid addition to our ever-growing selection of 2'' - 3'' gear!  The Babyhawk series is a great selection for micro spec class racing so when you need to practice hard, you are going to need those extra props.   The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch 

EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop 12 Pack - Choose Your Color

Geometry: 3 inch diameter 2.4 inch pitch 3 blades   Inertial Properties: weight: 1.25 grams Moment of Inertia: 3.05 g/cm^2   The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight.  A true 2.4

AVAN Mini 3 inch Propeller 3x2.4x3 6xCCW 6xCW - CHOOSE COLOR

EMAX Avan Mini 3x2.4x3 Tri-Blade 3

EMAX AVAN Mini 3 inch Propeller 3x2.4x3 6xCCW 6xCW

EMAX AVAN Mini 3 inch Propeller 3x2.4x3 6xCCW 6xCW - RMRC

EMAX Avan 6x3.8x2 Long Range Bi-Blade 6" Prop

Geometry: 6 inch diameter 3.8 inch pitch 2 blades   Inertial Properties: weight: 4.6 gram Moment of Inertia: 14.4 g/cm^2   The Emax Avan Long Range propeller 6x3.8x2 was designed to maximize range of flight.AAvan Long Range is optimize to operate at 50 mph with a low current consumption at that speed to maximize range.

AVAN Long Range Propeller 6x3.8x2 2xCCW 2xCW - CHOOSE COLOR

he Emax Avan Long Range propeller 6x3.8x2 was designed to maximize the range of flight. 

Emax AVAN Long Range 6X3.8X2 Propeller (Set of 4) 

EMAX Avan BabyHawk 2.3x2.7x3 Tri-Blade 2.3" Prop

The Emax Avan Babyhawk 2.3x2.7x3 propeller was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a spe

Emax Avan Babyhawk 2.3x2.7x3 Propeller (Set of 12 - Red)

The Emax Avan Babyhawk propeller 2x2.7x3 was designed to maximize control of your Babyhawk while remaining efficient. A true constant 2.7" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a speci

AVAN Babyhawk 2.3 2.3x2.7x3 Propeller 6 CW + 6 CCW - CHOOSE COLOR

EMAX Avan Flow 5x4.3x3 Tri-Blade 5" Prop

The Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient.

Emax Avan Flow 5x4.3x3 Propeller (Set of 4 - Red)

Tech Specifications: Geometry: 5 inch diameter 4.3 inch pitch 3 blades  Inertial Properties: weight: 4.3 grams Moment of Inertia: 13.4 g*cm^2 Product Description: The Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient. A true constant 4.3" pitch throughout the blade gives a line

AVAN Flow Propeller 5x4.3x3 - CHOOSE COLOR

Emax Avan Flow 5x4.3x3 Propeller (Set of 4 - Clear)

The Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient. A true constant 4.3" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. With a special PC blend the Avan Flow weighs 4.3 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 13.4 grams*square centimeter which in turn makes a very responsive prop.  

Best match for 2206 - 2207 - 2306 motors around 2400kv. 
The Avan Flow was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints, aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller.
Be sure to check out all our 5" props, and all our EMAX gear!
Specifications

Size: 5"
Pitch: 4.3"
Blades: 3-Blade
Weight: 4.4 grams
Moment of Inertia: 13.4 g*cm^2

Includes

4x EMAX Avan FLOW 5x4.3x3 Tri-Blade 5" Prop (2CW, 2CCW)


The Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient. A true constant 4.3" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. With a special PC blend the Avan Flow weighs 4.3 grams. Most of the weight is centra

EMAX Avan FLOW 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color

EMAX Avan FLOW 5x4.3x3 Tri-Blade 5

EMAX Avan FLOW 5

The latest EMAX Avan FLOW 5" Tri-Blade Prop is ready to take you to the top! With aggressive pitch and unmatched control you will dominate the course. These are also built for efficiency to give you a perfect blend of speed and battery life so you won't bog out mid race.

EMAX Avan FLOW 5" Tri-Blade Prop for Sale - Set of 4 - RaceDayQuads

Emax Avan Flow 5x4.3x3 Propeller (Set of 4 - Black)

EMAX Avan Micro 2x2.2x4 Quad-Blade 2" Prop

The EMAX AVAN micro was designed to take your micro to the furthest limits. Made for high speed and ultimate control, a 2 inch quad blade prop designed to push your micros past 70 mph. Perfect match for a 11xx motor around 4500-6500kv with 2-4s lipo batteries. Produced with a special blend of PC with a strong root desi

AVAN MICRO 2x2.2x4 Propeller 6 CW + 6 CCW - CHOOSE COLOR

Gemfan

Gemfan Freestyle 5236 Tri-Blade 5.2" Prop

Gemfan believes that there is a perfect prop for every situation. The new 5236 prop adds another great choice!  Check out all our 5" Props and the rest of our Gemfan Products! Specifications: Diameter: 5.2in Pitch: 3.6in Blades: 3 Material: Polycarbonate Hub Thickness: 6mm Shaft Hole: 5mm Weight: 3.9g Package Includes:

Gemfan Freestyle 5236 Durable Tri-Blade 5.2

Prop design priority list:#1 Cruising speed#2 Efficiency#3 Response#4 Durability We worked very carefully on this prop with Gemfan in order to deliver a specific performance target. The goal of this prop is to have higher cruising speed with more efficiency without loosing too much response. The larger disk size of 5.2

Gemfan 5236 (dark grey only) (5.21

Gemfan Freestyle 4S 5136 Tri-Blade 5" Prop

THE NEW FREESTYLE F4S! From the new and improved batch of Freestyle F4 Props from Gemfan! Gemfan Freestyle4S (5.1x3.6x3) Durable F4S Check out all our Propellers and the rest of our Gemfan Products! Specifications: Diameter: 5.1" Pitch: 3.6" Blades: 3 Weight: 3.6g Material: Polycarbonate Hub Thickness: 6mm Shaft Hole: 

Gemfan Freestyle4S (5.1x3.6x3) Durable F4S 2CW+2CCW- Choose Color

Limited Edition Halloween version of the gemfan Freestyle 4S. THE NEW FREESTYLE F4S! From the new and improved batch of Freestyle F4 Props from Gemfan! Gemfan Freestyle4S (5.1x3.6x3) Durable F4S Check out all our 5" Propellers and the rest of our Gemfan Products! Specifications: Diameter: 5.1" Pitch: 3.6" Blades: 3 Mat

Gemfan Freestyle4S (5.1x3.6x3) Durable F4S 2CW+2CCW- Halloween Edition

GEMFAN

Gemfan truly believes that there is a perfect prop for every situation. And to that end, the new Freestyle 4S 5136 prop adds a new choice to pick from. Gemfan continues to offer the perfect blend of form and function.
Check out the rest of our 5" props, and all our Gemfan selections!
Specifications

Propeller diameter: 5.1in
Pitch: 3.6in
Blades: 3
Material: Polycarbonate
Weight: 3.6g
Hub Thickness: 6mm
Shaft: 5mm

Includes

4x Gemfan Freestyle 4S 5136 Tri-Blade 5" Props


Gemfan truly believes that there is a perfect prop for every situation. And to that end, the new Freestyle 4S 5136 prop adds a new choice to pick from. Gemfan continues to offer the perfect blend of form and function.

Gemfan Freestyle 4S 5136 Tri-Blade 5" Prop 4 Pack - Choose Your Color

Gemfan Freestyle 4S 5136 Tri-Blade 5" Prop 4 Pack - Choose Your Color - For Sale At RaceDayQuads

The Gemfan Freestyle 4S 5.1x3.6x3 3-Blade Propeller is designed to elevate your drone's performance in FPV racing and freestyle flying. These 5.1-inch mini propellers feature a 3.6-inch pitch, providing a perfect balance of efficiency, thrust, and agility. 

The Gemfan Freestyle 4S 5.1x3.6x3 3-Blade Propeller is designed to elevate your drone's performance in FPV racing and freestyle flying. These 5.1-inch mini propellers feature a 3.6-inch pitch, providing a perfect balance of efficiency, thrust, and ag

Gemfan Freestyle 4S 5.1x3.6x3 3-Blade Propeller (Set of 4)

Specification
Item: Gemfan Freestyle 4S
Material:PC
Weight:3.6g
Pitch:3.6in
Prop Dia:129mm
Center Thickness: 6mm
Center Hole Dia: 5mm
Recommended Motor: 2107.5 / 2207 / 2306
Colors: Gray
Suitable Quadcopter:MARK5
Includes
2 x Gemfan Freestyle 4S Propellers CW
2 x Gemfan Freestyle 4S Propellers CCW

&ampnbsp

Specification Item: Gemfan Freestyle 4S Material:PC Weight:3.6g Pitch:3.6in Prop Dia:129mm Center Thickness: 6mm Center Hole Dia: 5mm Recommended Motor: 2107.5 / 2207 / 2306 Colors: Gray Suitable Quadcopter:MARK5 Includes 2 x Gemfan Freestyle 4S Propellers CW 2 x Gemfan Freestyle 4S Propellers CCW  

Gemfan Freestyle 4S Propeller - GEPRC

Gemfan Freestyle 4S Propeller

Prop design priority list: #1Response #2Speed #3Efficiency #4Durability This prop was designed to balance speed and response. Compared to the F3 prop, it literally trades half the responsiveness for maybe ~20% more speed/power. The durability of this prop is very similar to the F3 and again is not going to be as durable as something like the 51433 or any other blade that weighs more than 3.5g. Don't mind the pitch spec as it's not very helpful in describing a props performance; this prop is faster than the HW S4. What we recommend for optimal operation: ~2306 or comparable motor weighing ~29-35g ~1800-1880kv - 6S Under 720g AUW (including battery and GoPro) - lower is better Extended use case: This prop is not recommended for the sub 350g 5" class. Use the S3 blade. If your quad is ~750g AUW and you're running more than ~1700kv. It'll cap out the prop and it'll start fluttering. &nbsp;Specifications: Material: PC Weight: 3.6g Pitch: 3.6in Prop Dia: 129mm Center Thickness :6mm Center Hole Dia: 5mm Quad weight 550-750g Recommended Motor 4S 2300-2500kv 6S 1650-1950KV &nbsp;