FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Stator Width

Stator Length

Rush FPV

Rush FPV Vroom Farouk 2505.5 Motor - 2000Kv

RUSHFPV

Rush FPV has collaborated with freestyle pilot Farouk FPV to create the ultimate motor for Sbang style pilots or anyone in search of ultra quick response from their motors.
Make sure to check out our full motor selection and the rest of our Rush FPV products!
Specifications

Input Voltage: 6S
KV: 2000
Stator Dimensions: 25x5.5mm
Mounting Pattern: 16x16mm
Shaft Size: 5mm
Propeller: 5inch
Gross Weight: 34g
Wire: 20Awgx150mm

Includes

1x Rush FPV Vroom Farouk 2505.5 2000Kv Motor




Rush FPV has collaborated with freestyle pilot Farouk FPV to create the ultimate motor for Sbang style pilots or anyone in search of ultra quick response from their motors. Make sure to check out our full motor selection and the rest of our Rush FPV products! Specifications Input Voltage: 6S KV: 2000 Stator Dimensions:

RUSHFPV Vroom Farouk 2505.5 2000Kv Motor from WREKD Co.

RUSHFPV Vroom Farouk 2505.5 2000Kv Motor

The amazing Rush FPV Vroom Farouk 2505.5 2000Kv Motor is the latest and greatest freestyle motor on the market. You're going to love the snappy performance it provides.

Rush FPV Vroom Farouk 2505.5 2000Kv Motor for Sale - RaceDayQuads

RushFPV has teamed up with FaroukFPV freestyle pilot for this Sbang style Vroom 2505.5 Motor.&nbsp

RushFPV has teamed up with FaroukFPV freestyle pilot for this Sbang style Vroom 2505.5 Motor. 

RUSHFPV FaroukFPV Vroom 2505.5 Sbang Motor - 2000KV 

Brushless or Brushed

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

Motor KV

Motor Stator Size

T-Motor

T-Motor Pacer P2505 Motor - 1850Kv

T-Motor Pacer P2505 super lightweight for silky smooth, precision flow freestyle flying.Features N54 magnets and O-ring dampened bell design. Check out the rest of our 25XX Motors as well as the rest of our T-Motor products! Specifications Kv Rating: 1850 Motor Dimensions: ɸ30.4x28.8mm Wire: 20#AWG 150mm length Shaft D

T-Motor Pacer P2505 1850KV Motor

Tiger Motors

The T-Motor P2505 1850KV motor is a responsive, smooth, and super lightweight motor that is made of&nbsphigh-quality components like an N54 magnet for better performance and a unique&nbsphollow-carved design to bring you smooth flying!&nbsp

The T-Motor P2505 1850KV motor is a responsive, smooth, and super lightweight motor that is made of high-quality components like an N54 magnet for better performance and a unique hollow-carved design to bring you smooth flying! 

T-Motor P2505 1850KV Motor - Pale Rose

Lumenier

Lumenier ZIP V2 2407 Motor - 1700Kv

The Lumenier ZIP V2 motor line continues to grow with the addition of the ZIP V2 2407 Motor. With two different KV options to choose from, you'll have a ZIP V2 to match every setup!V2 features an updated dual-color bell, premium titanium alloy shaft, and light-weight design.

The Lumenier ZIP V2 motor line continues to grow with the addition of the ZIP V2 2407 Motor. With two different KV options to choose from, you'll have a ZIP V2 to match every setup!
V2 features an updated dual-color bell, premium titanium alloy shaf

Lumenier ZIP V2 2407 Motor - 1700KV/2550KV

BrotherHobby

BrotherHobby Avenger V2 2507 Motor - 1500Kv

BrotherHobby Avenger 2507 1500KV 4-6S Motor For Long Range FPV.

BrotherHobby Avenger V2 2507 1500KV Motor

BrotherHobby Avenger V2 2507 Motor - 1850Kv

The BrotherHobby Avenger 2507 V2 1850KV 4-6S Motor is designed to give the power and efficiency needed for Long Range FPV!
V2 comes with a new propeller grip on the top of the bell. The color scheme has also changed to all black.
We carry these motors in 1500, 1700 and 1850Kv.
Check out our entire motor section and all our Brotherhobby section.

Specifications

KV: 1850
Configuration: 12N14P
No.of Cells(LiPo): 4-6S
Rotor: N52H arc magnets
Stator: 0.15mm Nippon Steel silicon steel
Shaft: Titanium Alloy hollow shaft
Bearings:Japanese NMB 9x 4 x 4mm  
Wire AWG: 18AWG 16cm length
Bell cap: Al 7075
Base casing: Al 7075
Prop Adapter Shaft Thread: M5
Bolt Pattern: M3 (16X16mm)
Weight: 38G (with short wire)



Includes

1x Avenger 2507 V2 1850Kv Motor
1x Motor Nut
4x Motor Screws

 
Tests &ampamp Videos
Manufacturer Testing:3rd Party Testing:

EngineerX Thrust Table

 

The BrotherHobby Avenger 2507 V2 1850KV 4-6S Motor is designed to give the power and efficiency needed for Long Range FPV! V2 comes with a new propeller grip on the top of the bell. The color scheme has also changed to all black. We carry these motors in 1500, 1700 and 1850Kv. Check out our entire motor section and all

BrotherHobby Avenger V2 2507 1850Kv Motor from WREKD Co.

BrotherHobby Avenger V2 2507 1850Kv Motor

The BrotherHobby Avenger 2507-1850KV 4-6S.

BrotherHobby Avenger V2 2507-1850KV 4-6S

BROTHERHOBBY

The BrotherHobby Avenger 2507 V2 1850KV 4-6S Motor is designed to give the power and efficiency needed for Long Range FPV!
V2 comes with a new propeller grip on the top of the bell. The color scheme has also changed to all black.
We carry these motors in 1500, 1700 and 1850Kv.
Check out our entire motor section and all our Brotherhobby section.

Specifications

KV: 1850
Configuration: 12N14P
No.of Cells(LiPo): 4-6S
Rotor: N52H arc magnets
Stator: 0.15mm Nippon Steel silicon steel
Shaft: Titanium Alloy hollow shaft
Bearings:Japanese NMB 9x 4 x 4mm  
Wire AWG: 18AWG 16cm length
Bell cap: Al 7075
Base casing: Al 7075
Prop Adapter Shaft Thread: M5
Bolt Pattern: M3 (16X16mm)
Weight: 38G (with short wire)



Includes

1x Avenger 2507 V2 1850Kv Motor
1x Motor Nut
4x Motor Screws

 
Tests &amp Videos
Manufacturer Testing:3rd Party Testing:

EngineerX Thrust Table

 

BrotherHobby Avenger 2510 Motor - 1250Kv












The BrotherHobby Avenger 2510 1250Kv Motor is perfect for those seeking a reliable 6-7" quad motor. Enjoy smooth, reliable power with the unbeatable combination of quality and value for your drone. 











Check out our huge selection of motors and all our BrotherHobby gear!





Specifications

Stator Size: 2510
KV: 1250

Stator: 0.15mm Nippon Steel silicon steel

Prop Adapter Shaft Thread: M5

No.of Cells(Lipo): 5-7S

Bearings: Japanese NMB 9X4X4

Weight: 55g with 25cm SR wires

Bell cap: Al 7075

Base casing: Al 7075

Configuration: 12N14P

Shaft: Titanium Alloy hollow shaft

Bolt Pattern: M3 (16mmX16mm)

Rotor: N52H arc magnets

Wire AWG: 18AWG 25cm length

Includes

1x BrotherHobby Avenger 2510 1250Kv Motor


The BrotherHobby Avenger 2510 1250Kv Motor is perfect for those seeking a reliable 6-7" quad motor. Enjoy smooth, reliable power with the unbeatable combination of quality and value for your drone.  Check out our huge selection of motors and all our BrotherHobby gear! Specifications Stator Size: 2510 KV: 1250 Stator: 0

BrotherHobby Avenger 2510 1250Kv Motor












The BrotherHobby Avenger 2510 1250Kv Motor is perfect for those seeking a reliable 6-7&quot quad motor. Enjoy smooth, reliable power with the unbeatable combination of quality and value for your drone. 











Check out our huge selection of motors and all our BrotherHobby gear!





Specifications

Stator Size: 2510
KV: 1250

Stator: 0.15mm Nippon Steel silicon steel

Prop Adapter Shaft Thread: M5

No.of Cells(Lipo): 5-7S

Bearings: Japanese NMB 9X4X4

Weight: 55g with 25cm SR wires

Bell cap: Al 7075

Base casing: Al 7075

Configuration: 12N14P

Shaft: Titanium Alloy hollow shaft

Bolt Pattern: M3 (16mmX16mm)

Rotor: N52H arc magnets

Wire AWG: 18AWG 25cm length

Includes

1x BrotherHobby Avenger 2510 1250Kv Motor


BrotherHobby Avenger 2510 1250Kv Motor from WREKD Co.

FlyFishRC

FlyFishRC Flash 2406 Motor - 1950Kv

The FlyFishRC Flash 2406 Motor uses the Uni-Bell structure design providing high crash resistance while not adding more weight, providing high reliability and explosive power and thrust for FPV pilots at an affordable price.During months of design, testing, and improvement before mass production and testing help of FPV pilots from around the globe, we are now proud to release these excellent motors, that combine top-notch performance, slick look, reliable structure, and color schemes.The overall use of high-quality materials and sturdy structural design, NMB bearings with N52HS heat-resistant magnets, and up to 220° high heat-resistant copper wire ensure top-level performance and a much longer lifespan.High-quality 7075 Unibell bells make the motors even more durable. We haven’t forgotten about appearance! Stunning minimalist color schemes paired with a matte texture deliver smoothness and power with just enough responsiveness and controllable precision to fly. These motors give that unforgettable feeling of being locked in!    The gray-purple series is produced with a delicate matte surface treatment process for even better visual aesthetics of the motor. The two-color matte texture is extremely difficult to manufacture compared to the regular process and we were able to overcome the difficulties and make it mass-producible. At present, FlyFishRC is the first company to have accomplished that.If you&#39ve been looking for a high-quality motor, the Flash motor is definitely a good choice.
Check out our vast brushless motors selection, and our FlyFishRC product selection!
Features

Frosted Matte Unibell Design
High-strength titanium alloy shaft and 7075 aluminum
Ingenious non-slip structure of the prop seat
220° high-temperature resistant copper wire
NMB imported bearings and N52HS magnets
Thickened motor base and wire outlet protection braces
High-precision manufacturing and assembly process
Strict dynamic balance and performance QC


Specifications

Model: Flash 2406
Kv: 1950Kv
Input Voltage: 6S Lipo
Configuration: 12N14P
Motor dimensions (Dia x Len): 30.8x31.9MM
Weight: 35.8g with a short wire
Wire length: 20AWG 150mm
Mounting pattern: 16x16mm

Includes

1x FlyFishRC Flash 2406 1950Kv Motor
1x Hardware Set


The FlyFishRC Flash 2406 Motor uses the Uni-Bell structure design providing high crash resistance while not adding more weight, providing high reliability and explosive power and thrust for FPV pilots at an affordable price.During months of design, testing, and improvement before mass production and testing help of FPV

FlyFishRC Flash 2406 1950Kv Motor from WREKD Co.

FlyFishRC Flash 2406 1950Kv Motor

The FlyFishRC Flash 2406 Motor uses the Uni-Bell structure design providing high crash-resistance while not adding more weight, providing high reliability and explosive power and thrust for FPV pilots at an affordable price.During months of design, testing and improvement before mass production and testing help of FPV 

FlyFishRC Flash 2406 Brushless FPV Drone Motor - 1950KV

FLYFISH

The FlyFishRC Flash 2406 Motor uses the Uni-Bell structure design providing high crash resistance while not adding more weight, providing high reliability and explosive power and thrust for FPV pilots at an affordable price.During months of design, testing, and improvement before mass production and testing help of FPV pilots from around the globe, we are now proud to release these excellent motors, that combine top-notch performance, slick look, reliable structure, and color schemes.The overall use of high-quality materials and sturdy structural design, NMB bearings with N52HS heat-resistant magnets, and up to 220° high heat-resistant copper wire ensure top-level performance and a much longer lifespan.High-quality 7075 Unibell bells make the motors even more durable. We haven’t forgotten about appearance! Stunning minimalist color schemes paired with a matte texture deliver smoothness and power with just enough responsiveness and controllable precision to fly. These motors give that unforgettable feeling of being locked in!    The gray-purple series is produced with a delicate matte surface treatment process for even better visual aesthetics of the motor. The two-color matte texture is extremely difficult to manufacture compared to the regular process and we were able to overcome the difficulties and make it mass-producible. At present, FlyFishRC is the first company to have accomplished that.If you've been looking for a high-quality motor, the Flash motor is definitely a good choice.
Check out our vast brushless motors selection, and our FlyFishRC product selection!
Features

Frosted Matte Unibell Design
High-strength titanium alloy shaft and 7075 aluminum
Ingenious non-slip structure of the prop seat
220° high-temperature resistant copper wire
NMB imported bearings and N52HS magnets
Thickened motor base and wire outlet protection braces
High-precision manufacturing and assembly process
Strict dynamic balance and performance QC


Specifications

Model: Flash 2406
Kv: 1950Kv
Input Voltage: 6S Lipo
Configuration: 12N14P
Motor dimensions (Dia x Len): 30.8x31.9MM
Weight: 35.8g with a short wire
Wire length: 20AWG 150mm
Mounting pattern: 16x16mm

Includes

1x FlyFishRC Flash 2406 1950Kv Motor
1x Hardware Set


iFlight

iFlight XING2 2506 Motor - 1850Kv

We&#39re finally ready to announce our predecessor the XING2!
The smooth, reliable and powerful XING motors were upgraded and iFlight has achieved an even higher standard as well as better performance in motors than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor. Maybe the biggest bottleneck of our FPV flight controller is the motor due to its translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!
Due to the high-quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!
Check out our vast motor selection, and all our iFlight gear!

Features


5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 10x4x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced


Specification


KV: 1850Kv
Input Voltage: 6S Lipo
Configuration: 12N14P
Stator Diameter: 25mm
Stator Length: 6mm
Wire length: 20AWG 160mm
Mounting pattern: 16x16mm
Weight: 38.2g with wires

Includes

1x iFlight Xing 2 2506 1500Kv Motor
1x M5 Flanged Nylon Insert Lock Nut
4x M3x8mm Screws

 

We're finally ready to announce our predecessor the XING2! The smooth, reliable and powerful XING motors were upgraded and iFlight has achieved an even higher standard as well as better performance in motors than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time

iFlight Xing2 2506 1850Kv Motor from WREKD Co.

iFlight Xing2 2506 1850Kv Motor

IFLIGHT

We're finally ready to announce our predecessor the XING2!
The smooth, reliable and powerful XING motors were upgraded and iFlight has achieved an even higher standard as well as better performance in motors than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor. Maybe the biggest bottleneck of our FPV flight controller is the motor due to its translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!
Due to the high-quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!
Check out our vast motor selection, and all our iFlight gear!

Features


5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 10x4x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced


Specification


KV: 1850Kv
Input Voltage: 6S Lipo
Configuration: 12N14P
Stator Diameter: 25mm
Stator Length: 6mm
Wire length: 20AWG 160mm
Mounting pattern: 16x16mm
Weight: 38.2g with wires

Includes

1x iFlight Xing 2 2506 1500Kv Motor
1x M5 Flanged Nylon Insert Lock Nut
4x M3x8mm Screws

 

See how the iFlight Xing2 2306 2555Kv Motor has raised the bar! This powerful motor will help you reach new speeds and enjoy piloting even more.

iFlight Xing2 2306 2555Kv Motor for Sale - RaceDayQuads

T-Motor Pacer 2505 Motor - 1850Kv

TMOTOR

The next generation of the Pacer series motors now with an even larger, 2505 stator!
Check out our vast motor selection and all our T-Motor products!
Specifications 

KV: 1850
Motor Dimensions: Φ30.4*28.8mm
Lead: 20#AWG 150mm
Shaft Diameter: 4mm
Idle Current: 1.1A

Max.Power (the 60s): 1217W

Weight (Inc. Cable): 31.25g

Internal Resistance: 69mΩ

Configuration: 12N14P
Rated Voltage (Lipo): 4-6S

Peak Current (60s): 47A


Includes

1x T Motor Pacer 2505 1850Kv Motor

1x Spare Parts Bag


The next generation of the Pacer series motors now with an even larger, 2505 stator! Check out our vast motor selection and all our T-Motor products! Specifications  KV: 1850 Motor Dimensions: Φ30.4*28.8mm Lead: 20#AWG 150mm Shaft Diameter: 4mm Idle Current: 1.1A Max.Power (the 60s): 1217W Weight (Inc. Cable): 31.25g I

T-Motor Pacer 2505 1850Kv Motor - Pale Rose

T-Motor Hobby

T-Motor Pacer 2505 1850Kv Motor - Pale Rose from WREKD Co.

Camera Butter

Camera Butter Halo Cinematic 2406 Motor - 1800Kv

FPV flying has evolved, and the gear that we use needs to evolve with us.  Our needs are different: We are carrying larger cameras,  we demand smoother flight characteristics so we can capture creamy smooth video, and we need motors that can execute maneuvers in a controlled, super silky way. Can motors make you a bett

Camera Butter HALO Cinematic 2406 Motors - 1800KV

CAMERABUTTER

FPV flying has evolved, and the gear that we use needs to evolve with us. Our needs are different: We are carrying larger cameras, we demand smoother flight characteristics so we can capture creamy smooth video, and we need motors that can execute maneuvers in a controlled, super silky way. Camera Butter Halo motors are purpose-designed to have a torque curve, resolution, and feel for butter-smooth FPV flying on a 5 or 6 -inch FPV drone. These motors are fantastic for both freestyle and cinematic flying.
Check out all of our other motors, and all our Camera Butter selection!
Specifications


Kv: 1800Kv


Input Voltage: 5-6S LiPo


Stator Dimensions: 24mm Φ x 06mm


Shaft Diameter: 5mm Φ

Mounting Pattern: 16mm Φ

Wire Dimensions: 20AWG x 150mm


Weight (w/ wires): 29g


Includes

1x Camera Butter Halo Cinematic 2406 1800Kv Motor


FPV flying has evolved, and the gear that we use needs to evolve with us. Our needs are different: We are carrying larger cameras, we demand smoother flight characteristics so we can capture creamy smooth video, and we need motors that can execute maneuvers in a controlled, super silky way. Camera Butter Halo motors are purpose-designed to have a torque curve, resolution, and feel for butter-smooth FPV flying on a 5 or 6 -inch FPV drone. These motors are fantastic for both freestyle and cinematic flying.

Camera Butter Halo Cinematic 2406 1800Kv Motor

Camera Butter Halo Cinematic 2406 1800Kv Motor - For Sale At RaceDayQuads

T-Motor F2004 Motor - 1700Kv

T-Motor's F2004 Brushless motors allow several different uses, from 3 "Cinewhoop / racewhoop to 4 and 5" ultralight or even in Long Range use! Check out all our 20XX Motors and the rest of our T-Motor Products! Package Includes: 1 x T-Motor F2004 - 1700KV Motors

T-Motor F2004 - 1700KV Motors

T-Motor&#39s renowned F-Series motors are now available in a high-efficiency T-mount micro format.
Add these to your lightweight or long range builds for long flight times and an awesome thrust to weight ratio.
Available in multiple Kv options
Check out our vast motor selection and all our T-Motor products!
Specifications

KV: 1700
Configuration: 12N14P
Shaft Diameter: 3mm
Motor Dimensions: Ø24.3x17.25mm
No.of Cells (Lipo): 6S  
Idle Current (10V): 21.2A 
Internal Resistance: 221mΩ 
Max. Power (60S): 503W
Weight Including Cables (g): 16.4g  

Includes

1x T-Motor F 2004 1700Kv Micro Motor (1.5mm Shaft)




T-Motor's renowned F-Series motors are now available in a high-efficiency T-mount micro format. Add these to your lightweight or long range builds for long flight times and an awesome thrust to weight ratio. Available in multiple Kv options Check out our vast motor selection and all our T-Motor products! Specifications

T-Motor F2004 1700Kv Micro Motor (1.5mm Shaft) from WREKD Co.

T-Motor F2004 1700Kv Micro Motor (1.5mm Shaft)

T-Motor's renowned F-Series motors are now available in a high-efficiency T-mount micro format.
Add these to your lightweight or long range builds for long flight times and an awesome thrust to weight ratio.
Available in multiple Kv options
Check out our vast motor selection and all our T-Motor products!
Specifications

KV: 1700
Configuration: 12N14P
Shaft Diameter: 3mm
Motor Dimensions: Ø24.3x17.25mm
No.of Cells (Lipo): 6S  
Idle Current (10V): 21.2A 
Internal Resistance: 221mΩ 
Max. Power (60S): 503W
Weight Including Cables (g): 16.4g  

Includes

1x T-Motor F 2004 1700Kv Micro Motor (1.5mm Shaft)




FPV Cycle

FPV Cycle The Extra Smooth One 25mm Motor - 1870Kv

FPVCycle

Bell and stator now sold separately. 
Buy the colors you want and simply snap the bell onto the stator.
 


This is the first and only FPV motor on the market with Split Shifted magnets.
Simulations told us that this design would be 99% the same as a skewed stator design which is supposed to even out the flux field around the bell and increase the average torque. We&#39ve been around the block a few times so we weren&#39t surprised when that&#39s not how it played out in the real world. The real world result is that the throttle just feels like it has a whole lot more resolution on it leading to a more enhanced control feel when you&#39re trying to smoothly work the throttle. (spoiler, the Split Shifted magnet design doesn&#39t work out as an improvement on any motor size...we&#39re only using it on this motor after much testing and tweaking)

The performance target of this motor is improved low throttle power with enhanced throttle feel. If you&#39re looking for the smoothest flight performance, this is the motor for you. It&#39s still powerful enough to knock your socks off and especially good at maintaining higher cruising speeds on a 5.2&quot prop like the Gemfan 5226 (don&#39t bother with the 5236, it&#39s not as good as the 5226).This is the 4th gen of this motor and it&#39s been an expensive development journey. With the latest development of the Split Shift magnet structure, we believe it&#39s as good as it can be. This motor also shares the more recent developments of easy bell swaps, extra thick bell spoke structure and the O-ring shaft tension system.
 


Recommendations:

High performance: 1870kv with 6S 1100-1400mah and AUW below ~745g
Med-High performance: 1870kv with 5S 1550mah and AUW below ~745g

High performance: 2150kv with 5S 1200-1600mah and AUW below ~745g
Cruising: 1870kv or 2150kv with as little as 4S 1300mah or larger battery
Any of the above setups at a lower AUW is going to perform significantly better.

This Motor Pairs Well With:


Gemfan 51433 (strongly recommended)

Gemfan F4S (GREAT response + power)

Gemfan 5226 (Higher cruising speed)
GNB 1250mah 6S 130C
GNB 1100mah 6S 130C
GNB 1550mah 5S 130C
Sonicare frame
 INCISOR (Prototype 5) frame 
Glide frame




Specifications:

~35g with ~20mm wires
Delta wound winding
7075 Aluminum alloy
12N14P Configuration
M5 Prop Adapter Shaft Thread
13.5mm Titanium Alloy hollow shaft (8mm thread)
Flanged prop nut (M5x6), no washer
Japanese NMB 9x4x4mm Bearing
N52H arc magnets with retention lip on bell
0.15mm Nippon Steel silicon steel laminations
20AWG wire, ~20cm length
2.5mm thick mounting base, flush mount
16X16mm M3 mount
M3x8 button head bell retention screw
DON&#39T DRIVE YOUR MOUNTING SCREWS INTO THE WINDINGS WHEN MOUNTING THE MOTOR. IT WILL BREAK THE MOTOR.


Bell and stator now sold separately. Buy the colors you want and simply snap the bell onto the stator.   This is the first and only FPV motor on the market with Split Shifted magnets. Simulations told us that this design would be 99% the same as a skewed stator design which is supposed to even out the flux field around

FPVCycle 25mm Motor - The Extra Smooth One from WREKD Co.

FPVCycle 25mm Motor - The Extra Smooth One

Simulations told us that this design would be 99% the same as a skewed stator design which is supposed to even out the flux field around the bell and increase the average torque. We've been around the block a few times so we weren't surprised when that's not how it played out in the real world. The real world result is that the throttle just feels like it has a whole lot more resolution on it leading to a more enhanced control feel when you're trying to smoothly work the throttle. (spoiler, the Split Shifted magnet design doesn't work out as an improvement on any motor size...we're only using it on this motor after much testing and tweaking)

FlyFishRC Flash 2506 Motor - 1750Kv

The FlyFishRC Flash 2506 Motor uses the Uni-Bell structure design providing high crash-resistance while not adding more weight, providing high reliability and explosive power and thrust for FPV pilots at an affordable price.During months of design, testing and improvement before mass production and testing help of FPV 

FlyFishRC Flash 2506 Brushless FPV Drone Motor - 1750KV

FlyFishRC Flash 2506 Motor - 1550Kv

FlyFishRC Flash 2506 Brushless FPV Drone Motor - 1550KV

Camera Butter Halo Cinematic 2406 Motor - 2450Kv

Camera Butter HALO Cinematic 2406 Motors - 2450KV

iFlight XING2 2405 Motor - 1800Kv

The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. iFlight's ready to announce our predecessor the XING2! The high manufacturing standards and premium performance offered by the Xing line have been improv

iFlight Xing2 2405 1800KV Motor

Hyperlite

Hyperlite 2408.5 Team Edition Motor - 1322Kv

BIG BLOCK!MONSTER TORQUE AND POWER!The new Hyperlite 2408.5 motor line was designed specifically having long range and freestyle pilots in mind.No matter what size prop you throw at these bad boys they will spin it like nothing! SPECIFICATIONS KV: 1322KV, 1622KV , 1922KV , 2222KV , 2522KV Base casing: Al 7075 Stator: 0

HYPERLITE 2408.5 TEAM EDITION (CHOOSE KV)

Hyperlite 2405 Pyrodrone Team Edition Motor - 2722Kv

Check out this amazing freestyle clip by PERKS using the HyperLite 2405-2722 Motors!Configuration: 12N14P  No.of Cells(Lipo): 4-5S  Magnet: N52H arc magnets   Wire AWG: 20AWG  Shaft: Titanium Alloy hollow shaft (14mm ) Stator: 0.15mm Nippon Steel silicon steel  Bearings:  Japan EZO  8x 4 x 3mm   Base casing: Al 7075   

PyroDrone HyperLite 2405-2722 Team Edition

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 