FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Stator Width

Stator Length

FPV Cycle

FPV Cycle 22.6mm Motor - 1920Kv

This motor is designed for high power and high response 5" performance without sacrificing efficiency. The unique 22.6mm stator size comes from the RCInpower Wasp motor which is uniquely powerful and efficient for its size and weight. We've taken that same formula, updated the magnets, thickened the magnets, and increased the stator height for more overall torque without overdoing the surface area to volume ratio of the stator. The Kv has been carefully tuned to provide the response and power which results in that intoxicating connected feel with the craft. Other features include a bell that can easily be removed and a rubber O-ring between the bell and bearing for shaft retention pressure control.The bell spoke design of all our latest 5" and up motors are extra thick for even more durability. Even so, nothing can ultimately hold up to FPV smashing punishment. That's why we sell the bell and stator separately. To make a statement that you can repair your motors too. As a bonus, we're able to offer various bell colors without stocking an excessive number of products. Recommendations: Gemfan 51433 (HIGHLY recommended all around) Gemfan F4S (GREAT response and power) Gemfan F3S (more response, lower power) 1000 - 1250mah 6S 1100 - 1300mah 5S 1300mah 4S - very high efficiency, less power (Highest C rated batteries are generally recommended for the best performance) Specifications: Bell - 14.4g (silver is 14.3g) Stator - ~19.6g with ~90mm wire Total motor weight with short wire is about 33g Delta wound wires 7075 Aluminum alloy 12N14P Configuration M5 Prop Adapter Shaft Thread 14mm Titanium alloy hollow shaft (8mm thread) Flanged prop nut (M5x6), no washer Japanese NMB 9x4x4mm Bearing N52H arc magnets with retention lip on bell 0.15mm Nippon Steel silicon steel laminations 20AWG wire, ~20cm length 2.5mm thick mounting base, flush mount 16X16mm M3 mount M3x5 button head bell retention screw DO NOT DRIVE YOUR MOUNTING SCREWS INTO THE WINDINGS WHEN MOUNTING THE MOTOR. IT WILL BREAK THE MOTOR.

FPVCycle 22.6mm Motor - 1920kv

RCINPOWER

Insert a short descriptive sentence here. Highlight the Product Name in bold.

FPVCycle 22.6mm - 1920kv (Glossy Gray)

Motor KV

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

Motor Stator Size

Rcinpower

Rcinpower MCK GTS V4 2207 Motor - 2100Kv

RCinPOWER

This RCinPOWER MCK GTS V4 2207 2100Kv Motor offers superior performance for professional and enthusiast drone racers. Featuring advanced 2207 stator technology and optimized design, these motors offer a clean, aggressive look with all the power you need for your racing needs. Created in collaboration with top pilot MCK and RCinPOWER, these motors deliver the perfect combination of power and style. 
Featuring an EZO 9x4x4mm bearing, one-piece bell machined in one piece and 4mm diameter shaft providing all the necessary features to be resistance to crashes. 
This motor is perfect for racing, as well as aggressive freestyle.
Check out our vast brushless motors selection, and all our Rcinpower products!


Specifications

Model: RCinPOWER GTS V4 2207 MCK Edition 

Configuration: 12N14P

Stator Diameter: 22mm

Stator Length: 7mm

Shaft Diameter: 4mm (Hollow)

Motor Dimension: 27.3 x 30.3mm

Weight: 30.1 Grams (2cm Wires)

Idle Current (10 Seconds)@10V: 1.2A

No. Of Cells (Lipo): 5~6S

Max Continuous Power (W) 5S: 1350

Internal Resistance: 56mΩ

Max Current (3S): 56A

Max. Efficiency Current: (6-10A)&ampgt86%

Includes

1x RCinPOWER MCK GTS V4 2207 2100Kv Motor
1x Hardware Set


This RCinPOWER MCK GTS V4 2207 2100Kv Motor offers superior performance for professional and enthusiast drone racers. Featuring advanced 2207 stator technology and optimized design, these motors offer a clean, aggressive look with all the power you need for your racing needs. Created in collaboration with top pilot MCK

RCinPOWER MCK GTS V4 2207 2100Kv Motor from WREKD Co.

RCinPOWER MCK GTS V4 2207 2100Kv Motor

This RCinPOWER MCK GTS V4 2207 2100Kv Motor offers superior performance for professional and enthusiast drone racers. Featuring advanced 2207 stator technology and optimized design, these motors offer a clean, aggressive look with all the power you need for your racing needs. Created in collaboration with top pilot MCK and RCinPOWER, these motors deliver the perfect combination of power and style. 
Featuring an EZO 9x4x4mm bearing, one-piece bell machined in one piece and 4mm diameter shaft providing all the necessary features to be resistance to crashes. 
This motor is perfect for racing, as well as aggressive freestyle.
Check out our vast brushless motors selection, and all our Rcinpower products!


Specifications

Model: RCinPOWER GTS V4 2207 MCK Edition 

Configuration: 12N14P

Stator Diameter: 22mm

Stator Length: 7mm

Shaft Diameter: 4mm (Hollow)

Motor Dimension: 27.3 x 30.3mm

Weight: 30.1 Grams (2cm Wires)

Idle Current (10 Seconds)@10V: 1.2A

No. Of Cells (Lipo): 5~6S

Max Continuous Power (W) 5S: 1350

Internal Resistance: 56mΩ

Max Current (3S): 56A

Max. Efficiency Current: (6-10A)&gt86%

Includes

1x RCinPOWER MCK GTS V4 2207 2100Kv Motor
1x Hardware Set


The RCINPOWER GTS V4 2207 MCK Edition Motor is designed with a lightweight base and a one-piece bell, these motors offer exceptional durability and optimized performance.&nbsp

The RCINPOWER GTS V4 2207 MCK Edition Motor is designed with a lightweight base and a one-piece bell, these motors offer exceptional durability and optimized performance. 

RCINPOWER GTS V4 2207 MCK Edition Motor - 2100KV

Created in collaboration with top racing pilot MCK and RCInpower these motors are optimized for performance. These motors have been designed based on a 2207 stator with a clean and aggressive design. With a weight of 30.1g for 2100kv and a stator size adapted to provide the best compromise of power and control, they ar

RCINPOWER GTS V4 2207 MCK Edition 2100KV Brushless FPV Drone Motor

T-Motor

T-Motor Slatts 2306.3 Motor - 1700Kv

Introducing the new Slatt 2306.3 FPV Drone Motors. Made in collaboration with freestyle pilot SlattFPV these motors are not only adorable with their heart style bell design but they're also meant to be durable and smooth. Available in two colors Cute Pink and Classic Grey, pick up yours today! This motor is also availa

T-Motor Slatts 2306.3 1700KV FPV Drone Motor - Choose Color

Tiger Motors

The T-Motor Slatts 2306.3 Motor continues the lineage of great FPV racing motors by T-Motor! Slaats was designed in collaboration with SlattFPV. 

T-Motor Slatts 2306.3 Motor - 1700KV/2500KV

Brushless or Brushed

Xhelix

Xhelix FPV Garuda SF 2306 Motor - 1850Kv

Xhelix FPV

Introducing the Xhelix Garuda SF Motor from XHELIX FPV - the first motor designed in Spain! The Garuda SF features premium quality materials. Expect a smooth and powerful flight experience in the air!

Xhelix FPV Garuda SF 2306 Motor - 1850KV

TBS Grinder V4 2207 Motor - 1750Kv

The final form of the botgrinder motors are here! Introducing the v4 grinder motors! Redesigned with the ultimate durability in mind these new motors feature a new bearing reinforcement and a super thicc 4mm shaft to make these the strongest grinder motors yet!  Check out all our 22xx Motors and the rest of our TBS col

TBS Grinder V4 2207 1750KV Freestyle Motor

Team BlackSheep

The TBS Grinder V4 Motor features a 2207 Stator and 1750KV.

TBS Grinder V4 2207 Motor - 1750KV

Foxeer

Foxeer Datura 2207.5 Motor - 1960Kv

The&nbspFoxeer Datura 2207.5 FPV Motor&nbspis one of Foxeer's new line of motors! This is an ultralight motor with semi-hollow titanium shaft that reduces weight while strengthening the motor.

The Foxeer Datura 2207.5 FPV Motor is one of Foxeer's new line of motors! This is an ultralight motor with semi-hollow titanium shaft that reduces weight while strengthening the motor.

Foxeer Datura 2207.5 FPV Motor

Introducing Foxeer's entry into the FPV motor scene. The Datura line of motors feature ultra-light semi-hollow titanium shaft, rubber dampener ring for shock absorption, high quality N52H magnets, and Military grade 260 Degree Celsius radiation resistant high temperature windings.  Check out all our 22XX Motors and the

Foxeer Datura 2207.5 FPV Motor - 1960KV

iFlight

iFlight XING2 2207 Black Motor (Nazgul Evoque) - 1750Kv

All-black edition of the XING2 motor. The stock motor in the Nazgul Evoque.

iFlight XING2 2207 Black Motor (Nazgul Evoque) 1750KV/2750KV

All black motor with the iFlight logo, with the classic 2207 stator size most ideal for freestyle and racing. This motor is rated at 1750Kv, which is designed for 6S power!
The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor! Maybe the biggest bottleneck of our FPV flight controller is the motor due to it&#39s translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!
Due to the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!
Check out our vast motor selection, and all our iFlight gear!
Features

5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 9x9x4 bearings
Center-slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced


Specifications

KV: 1750KV 

Weight(included wire): 30.5g

Dimension: φ29x19.25mm

Interphase Resistance: 74.23mΩ

Input Volts: 25.2V

Peak Current: 36.3A

Max Watt: 898W 

Mounting Holes: 16x16 φ3mm

Rotor Specifications: Unibell

Shaft Diameter: 5mm

Shaft Protruding Length: 13.5mm

Lead: 160mm

Magnet: N52H Curved

Configuration: 12N14P

Bearing Type: NSK

Bearing Specification: φ9xφ4x4

Winding: Single Strand copper winding

Includes

1x iFlight Xing2 2207 1750Kv Motor


All black motor with the iFlight logo, with the classic 2207 stator size most ideal for freestyle and racing. This motor is rated at 1750Kv, which is designed for 6S power! The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performanc

iFlight Xing2 2207 1750Kv Motor - Black from WREKD Co.

iFlight Xing2 2207 1750Kv Motor - Black

IFLIGHT

All black motor with the iFlight logo, with the classic 2207 stator size most ideal for freestyle and racing. This motor is rated at 1750Kv, which is designed for 6S power!
The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor! Maybe the biggest bottleneck of our FPV flight controller is the motor due to it's translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!
Due to the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!
Check out our vast motor selection, and all our iFlight gear!
Features

5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 9x9x4 bearings
Center-slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced


Specifications

KV: 1750KV 

Weight(included wire): 30.5g

Dimension: φ29x19.25mm

Interphase Resistance: 74.23mΩ

Input Volts: 25.2V

Peak Current: 36.3A

Max Watt: 898W 

Mounting Holes: 16x16 φ3mm

Rotor Specifications: Unibell

Shaft Diameter: 5mm

Shaft Protruding Length: 13.5mm

Lead: 160mm

Magnet: N52H Curved

Configuration: 12N14P

Bearing Type: NSK

Bearing Specification: φ9xφ4x4

Winding: Single Strand copper winding

Includes

1x iFlight Xing2 2207 1750Kv Motor


Ethix

Ethix Mr Steele Stout V4 Motor - Red Launch Edition

Replacement motor bell for the Ethix V4 Stout Motors (Launch Edition).

Ethix Mr Steele Stout Motor V4 Spare Bell (Launch Edition)

Introducing the 4th iteration of the Mr Steele Stout 6S motor. Launch edition limited to 1000pcs created by Ethix.

Ethix Mr Steele Stout Motor V4 - Red Launch Edition

Ethix Mr Steele Silk V4 2306 Motor - 2345Kv

The wait is over! I would like to Introduce the Mr. Steele V4 SILK 2306 (2345KV) 4S FPV freestyle motor.  I take great pride in my work and am always trying to raise the bar. After two years of seemingly nonstop research &amp; development, I am proud to present this fine piece of Miniquad motor engineering.  Check out 

Ethix Mr. Steele Silk Motor V4 - 2345KV

Replacement motor bell for the Ethix V4 Silk Motors.

Ethix Mr Steele Silk Motor V4 Spare Bell

Introducing the 4th iteration of the Mr Steele Silk 4S motor.

Ethix Mr Steele Silk 2306 2345KV Motor V4

Ethix Mr Steele Stout V3 2306 Motor - 1750Kv

Introducing the third iteration of the Mr. Steele motor line. This well-refined piece of kit is built upon the success of its predecessors and tuned for an even higher flight envelope.

Ethix Mr Steele 2306 1750kv Stout V3 Motor

The Legacy Stout V3 has changed the colorway to an all-new raw tumbled aluminum finish. The V3 Legacy motors offer maximum performance and compatibility without breaking the bank. V3 legacy motors share completely reverse compatibility with Mr Steele V3 motors.

The Legacy Stout V3 has changed the colorway to an all-new raw tumbled aluminum finish. The V3 Legacy motors offer maximum performance and compatibility without breaking the bank. V3 legacy motors share completely reverse compatibility with Mr Steele

Ethix Mr Steele Stout Motor V3 - Legacy

iFlight XING-E PRO 2207 Motor - 2450Kv

The XING-E Pro 2207 Motor by iFlight is a 2207 sized motor that features a High-strength 4mm steel hollow shaft, Single strand windings for performance, an M3 shaft screw, and larger 9x4x4mm NSK bearings.

iFlight XING-E Pro 2207 Motor (1pc) - 1800KV/2450KV/2750KV

XING-E PRO series are everything you love about Xing motors at a more affordable price, and now with a unibell design like their premium counterparts! Performance and durability are still of utmost importance to iFlight when designing these motors. They feature a 4mm high strength hollow steel shaft, single strand windings, M3 shaft screw, and larger 9x4x4mm NSK bearings.
We also carry the original Xing and Xing Camo lineup of course! 
Check out our vast motor selection, and all our iFlight gear!
Features

New Unibell construction

High-strength 4mm Steel shaft

N52H High-temperature magnets, NSK bearings
16x16mm hole pattern
Single strand copper winding
Hex bolt shaft set screw


Specifications

Kv: 2450
Input Voltage: 2-4S
Configuration: 12N14P
Magnets: N52SH Curved

Max Continuous Current: 42.63A
Internal Resistance: 46.8mΩ
ldle Current@10V: 2A
Motor Dimensions: Φ28.5x19.7mm

Stator Dimensions: Φ22x7mm
Shaft Diameter: 4mm Steel
Bearing Dimensions: 9x4x4mm

Output Shaft Dimensions: ΦM5x15mm
Wire Dimensions: 20AWG x 150mm
Mounting Pattern: Φ16mm, 4x M3
Weight (w/ wires): 33.8g 



Includes

1x IFlight Xing-E PRO 2207 2450Kv Motor 


 
 
 

XING-E PRO series are everything you love about Xing motors at a more affordable price, and now with a unibell design like their premium counterparts! Performance and durability are still of utmost importance to iFlight when designing these motors. They feature a 4mm high strength hollow steel shaft, single strand windings, M3 shaft screw, and larger 9x4x4mm NSK bearings.

iFlight Xing-E PRO 2207 2450Kv Motor

iFlight Xing-E PRO 2207 2450Kv Motor - For Sale At RaceDayQuads

XING-E PRO series are everything you love about Xing motors at a more affordable price, and now with a unibell design like their premium counterparts! Performance and durability are still of utmost importance to iFlight when designing these motors. They feature a 4mm high strength hollow steel shaft, single strand wind

iFlight Xing-E PRO 2207 2450Kv Motor from WREKD Co.

T-Motor BMS Raptor V2 2306.5 Motor - 2000Kv

T-Motor BMS2306.5 V2 FPV Drone Motor! Check out all our 23XX Motors and the rest of our T-Motor Products!

T-Motor BMS 2306.5-2000kv V2 FPV Drone Motor

The T-Motor BMS Racing Raptor V2 2306.5 Motor was developed in collaboration with Thomas Bitmatta (BMSWEB). The BMS Racing Raptor series by T-Motor was made to the highest standards of FPV racing.

T-Motor BMS Racing Raptor V2 2306.5 Motor - 2000KV

Flywoo

Flywoo NIN V2 2303.5 Motor - 1750Kv

The NIN 2303.5 is an ultralight motor made to the highest standards of FPV freestyle racing. This motor has a high-grade unibell design, heat-resistant copper wiring, arc magnets, and an electroplating surfacing process which leaves the NIN Motor with a unique shiny reflection!

The NIN 2303.5 is an ultralight motor made to the highest standards of FPV freestyle racing. This motor has a high-grade unibell design, heat-resistant copper wiring, arc magnets, and an electroplating surfacing process which leaves the NIN Motor wit

Flywoo NIN V2 2303.5 Motor - 1750KV/3000KV

iFlight XING2 2306 Motor - 2555Kv

iFlight's 2nd gen Xing lineup has raised the bar when it comes to FPV motors. The high manufacturing standards and premium performance offered by the Xing line have been improved upon, offering upgrades such as center slotted curved arc magnets, tighter gaps between magnet and stator, higher power output, and improved efficiency.
Check out our vast motor selection, and all our iFlight gear!
Features


5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 9x9x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced

Specification


KV: 2555Kv
Version: CW Screw Thread
Input Voltage: 4S Lipo
Configuration: 12N14P
Stator Diameter: 23mm
Stator Length: 6mm
Wire length: 20AWG 160mm
Mounting pattern: 16*16mm
Weight: 31.6g with short wire

Includes

1x iFlight Xing 2 2306 2555Kv Motor

 

See how the iFlight Xing2 2306 2555Kv Motor has raised the bar! This powerful motor will help you reach new speeds and enjoy piloting even more.

iFlight Xing2 2306 2555Kv Motor

iFlight Xing2 2306 2555Kv Motor for Sale - RaceDayQuads

iFlight&#39s 2nd gen Xing lineup has raised the bar when it comes to FPV motors. The high manufacturing standards and premium performance offered by the Xing line have been improved upon, offering upgrades such as center slotted curved arc magnets, tighter gaps between magnet and stator, higher power output, and improved efficiency.
Check out our vast motor selection, and all our iFlight gear!
Features


5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 9x9x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced

Specification


KV: 2555Kv
Version: CW Screw Thread
Input Voltage: 4S Lipo
Configuration: 12N14P
Stator Diameter: 23mm
Stator Length: 6mm
Wire length: 20AWG 160mm
Mounting pattern: 16*16mm
Weight: 31.6g with short wire

Includes

1x iFlight Xing 2 2306 2555Kv Motor

 

iFlight's 2nd gen Xing lineup has raised the bar when it comes to FPV motors. The high manufacturing standards and premium performance offered by the Xing line have been improved upon, offering upgrades such as center slotted curved arc magnets, tighter gaps between magnet and stator, higher power output, and improved 

iFlight Xing2 2306 2555Kv Motor from WREKD Co.

The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. iFlight's ready to announce our predecessor the XING2! The high manufacturing standards and premium performance offered by the Xing line have been improv

iFlight Xing2 2306 2555KV Motor

iFlight is finally ready to announce its predecessor to the XING motor, the XING2! These smooth, reliable, and powerful XING motors have been upgraded with an even higher standard of performance and manufacturing. The XING2 motors offer a faster response to translate your PID loop quicker and get that locked-in feeling you have always been looking for!

iFlight is finally ready to announce its predecessor to the XING motor, the XING2! These smooth, reliable, and powerful XING motors have been upgraded with an even higher standard of performance and manufacturing. The XING2 motors offer a faster resp

iFlight XING2 2306 1755KV/2555KV Motor 

T-Motor MCK V3.0 2207.5 Motor - 2100Kv

Made in collaboration with one of the fastest FPV pilots in the world,&nbspMinChan Kim, the MCK 2207.5 V3 Motor from T-Motor is a fast-racing-motor made with premium components

Made in collaboration with one of the fastest FPV pilots in the world, MinChan Kim, the MCK 2207.5 V3 Motor from T-Motor is a fast-racing-motor made with premium components

T-Motor MCK 2207.5 V3 1910KV/2100KV Motor 

Made in collaboration with one of the fastest FPV pilots in the world, MinChan Kim, the MCK 2207.5 V3 Motor from T-Motor is a fast-racing-motor made with premium components. Insanely smooth and extremely durable, the MCK 2207.5 V3 Motor is a racing motor aiming to be the best! Choose between two different KV options: 1

T-MOTOR MCK 2207.5 V3 (2100KV)

iFlight XING2 2207 Motor - 2755Kv

The successor to the ever-popular XING motors, the XING2 brings new features such as center-slotted N52H curved arc magnets to reduce response time to give you the most locked-in feeling yet.

iFlight XING2 2207 Motor - 1855KV/2755KV

iFlight Xing2 2207 2755KV Motor

T-Motor VELOX V2 2307 Motor - 1950Kv

T-Motor's NEW V2 Velox Veloce V2307! Check out all our 23XX Motors and the rest of our T-Motor Products! Available in 2 KVs: 1950KV 2550KV Package Includes: 1 x T-Motor Velox Veloce V2307 V2 - 1950KV

T-Motor Velox Veloce V2307 V2 - 1950KV

Introducing the new V2 VELOX motors by T-Motor. The V2307 motors come in a new and sleek design and are made with&nbsppremium components&nbspto give your multirotor visibility and speed in the game! Great for freestyle and racing. Velox series is designed for pilots to challenge themselves constantly, so they can be free while flying! Feel the wind, free yourself, and challenge your limits! Available in 1950KV or 2550KV.

Introducing the new V2 VELOX motors by T-Motor. The V2307 motors come in a new and sleek design and are made with premium components to give your multirotor visibility and speed in the game! Great for freestyle and racing. Velox series is d

T-Motor VELOX VELOCE V2307 V2 Motor - 1950KV/2550KV (Rose Gold)

T-Motor VELOX V2 2208 Motor - 1950Kv

T-Motor Hobby


Second version of the Velox Motor line, better, brighter, and lighter!
These motors are a perfect choice for those freestyle 6S builds.
Check out our vast motor selection and all our T-Motor products!

Specifications

KV: 1950
Motor Dimension: Φ27.6*31.95mm
Lead: 20AWG 150mm
Shaft Diameter: 4mm
Weight (Inc. Cable): 33.4g
Configuration: 12N14P
Rated Voltage (Lipo): 6S

Includes

1x T Motor Velox V2 2208 1950Kv Motor - Grey



Second version of the Velox Motor line, better, brighter, and lighter! These motors are a perfect choice for those freestyle 6S builds. Check out our vast motor selection and all our T-Motor products! Specifications KV: 1950 Motor Dimension: Φ27.6*31.95mm Lead: 20AWG 150mm Shaft Diameter: 4mm Weight (Inc. Cable): 33.4g

T-Motor VELOX V2 2208 1950Kv Motor - Grey from WREKD Co.

T-Motor VELOX V2 2208 1950Kv Motor - Grey

TMOTOR

Second version of the Velox Motor line, better, brighter, and lighter!

T-Motor Velox V2 2208 1950Kv Motor - Grey - For Sale at RaceDayQuads

Introducing the new V2 VELOX motors by T-Motor. The V2800 motors come in a new and sleek design and are made with&nbsppremium components&nbspto give your multirotor visibility and speed in the game! Great for freestyle and racing. Velox series is designed for pilots to challenge themselves constantly, so they can be free while flying! Feel the wind, free yourself, and challenge your limits! Available in 1750KV,1950KV, or 2450KV.

Introducing the new V2 VELOX motors by T-Motor. The V2800 motors come in a new and sleek design and are made with premium components to give your multirotor visibility and speed in the game! Great for freestyle and racing. Velox series is d

T-Motor VELOX VELOCE V2208 V2 Motor - 1750KV/1950KV/2450KV (Gray)

T-Motor's NEW V2 Velox Veloce V2208!  Check out all our 22XX Motors and the rest of our T-Motor Products! Available in 3 KVs: 1750KV 1950KV 2450KV Package Includes: 1 x T-Motor Velox Veloce V2208 V2 - 1950KV

T-Motor Velox Veloce V2208 V2 - 1950KV

T-Motor VELOX V2 2306.5 Motor - 1950Kv

T-Motor's NEW V2 Velox Veloce V2306.5! Check out all our 23XX Motors and the rest of our T-Motor Products! Available in 2 KVs: 1950KV 2550KV Package Includes: 1 x T-Motor Velox Veloce V2306.5 V2 - 1950KV

T-Motor Velox Veloce V2306.5 V2 - 1950KV

The Velox V2 2306.5 motors come in a new and sleek design and are made with premium components to give your multirotor visibility and speed in the game! Great for freestyle and racing. The Velox series is designed for pilots to challenge themselves constantly, so they can be free while flying! Feel the wind, free yourself, and challenge your limits! 
These motors are a perfect choice for those freestyle 6S builds.
Check out our vast motor selection and all our T-Motor products!
Features

5inch cinematic FPV racing or freestyle
Unibell deisgn,more durable
Good low-end motor
Easier to control


Specifications
Velox V2 V2306.5 1950Kv Motor:

Dimensions: 28.6x30.45mm
Lead: 20#AWG 150mm
Internal Resistance: 67mΩ
Configuration: 12N14P
Rated Voltage (Lipo): 4-6S
Peak Current (60s): 37.4A
Shaft Diameter: 4mm
Idle Current(10V): 1.28A
Max. Power (the 60s): 902W
Weight (Excl. Cable): 29.4g

Includes

1x T-Motor Velox V2 V2306.5 1950Kv Motor
4x Lg Bolt
4x Md Bolt
1x Sm Bolt
2x Spacer
1x Prop Nut
2x T-Motor Stickers


The Velox V2 2306.5 motors come in a new and sleek design and are made with premium components to give your multirotor visibility and speed in the game! Great for freestyle and racing. The Velox series is designed for pilots to challenge themselves constantly, so they can be free while flying! Feel the wind, free yours

T-Motor Velox V2 V2306.5 1950Kv Motor from WREKD Co.

T-Motor Velox V2 V2306.5 1950Kv Motor

Introducing the new V2 VELOX motors by T-Motor. The V2306.5 motors come in a new and sleek design and are made with premium components to give your multirotor visibility and speed in the game! Great for freestyle and racing. Velox series is designed for pilots to challenge themselves constantly, so they can be free while flying! Feel the wind, free yourself, and challenge your limits! Available in 1950KV or 2550KV.

Introducing the new V2 VELOX motors by T-Motor. The V2306.5 motors come in a new and sleek design and are made with premium components to give your multirotor visibility and speed in the game! Great for freestyle and racing. Velox series is designed 

T-Motor VELOX VELOCE V2 V2306.5 Motor (Royal Blue) - 1950KV/2550KV

T-Motor VELOX V2 2207.5 Motor - 2550Kv

T-Motor's NEW V2 Velox Veloce V2207.5! Available in 3 KVs: 1750KV 1950KV 2550KV  Check out all our 22XX Motors and the rest of our T-Motor Products!  

T-Motor Velox Veloce V2207.5 V2 - 2550KV

Introducing the new V2 VELOX motors by T-Motor. The V2207.5 motors come in a new and sleek design and are made with&nbsppremium components&nbspto give your multirotor visibility and speed in the game! Great for freestyle and racing. Velox series is designed for pilots to challenge themselves constantly, so they can be free while flying! Feel the wind, free yourself, and challenge your limits! Available in 1750KV or 2550KV.

Introducing the new V2 VELOX motors by T-Motor. The V2207.5 motors come in a new and sleek design and are made with premium components to give your multirotor visibility and speed in the game! Great for freestyle and racing. Velox series is

T-Motor VELOX VELOCE V2207.5 V2 Motor - 1750KV/1950KV/2550KV (Royal Blue)

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 