FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Stator Width

Stator Length

BetaFPV

BetaFPV 1102 Motor - 18000Kv

BETAFPV

1102 18000KV Brushless Motors 2022 version comes with a new appearance of the black and red motor bell. Not only is it the stock motor for the Meteor75 Brushless Whoop Quadcopter (1S HD Digital VTX) but also available for other 1S whoop drones. Whatever classical 1102 18000KV or new version, they have the same performance.
Check out the rest of our Micro Motors, as well as the rest of our BetaFPV gear!

Specifications

Input Voltage: 1S
Kv Rating: 18000Kv
Configuration: 9N12P

Shaft Diameter: 1.5mm

Shaft Length: 5mm
Weight (Incl. Cable): 2.9g

Mounting Pattern: 6x6mm TRI

Includes

4x 1102 18000KV Brushless Motor
1x Pack of M1.4x4 Screws



1102 18000KV Brushless Motors 2022 version comes with a new appearance of the black and red motor bell. Not only is it the stock motor for the Meteor75 Brushless Whoop Quadcopter (1S HD Digital VTX) but also available for other 1S whoop drones. Whatever classical 1102 18000KV or new version, they have the same performa

BetaFPV 2022 Series 1102 18000Kv Micro/Whoop Motor 4 Pack

BetaFPV 2022 Series 1102 18000Kv Micro/Whoop Motor 4 Pack from WREKD Co.

Coming with a new appearance of the black and red motor bell. New 1102 Brushless Motors have been released for stronger thrust in 1S whoop drone with two RPM (revolutions per minute) versions 18000KV or 22000KV, which meets pilots' needs for different flying purposes. This motor is lightweight at 2.79g/pc and is suitable for most 75mm 1S frames like Meteor75 Frame.

Bullet Points

Adopts the technology of ball bearing, which effectively reduced the friction between the bearing surfaces, increased the duration of the motor, and improved its efficiency.
Lead wire is soldered to the PCB, which allows you to repair it easier once disconnected.
With exquisite workmanship, provides the most incredible power and thrust in the lightest weight of 2.79g, sturdy structure, and high-quality materials make it performs like a beast.
Possesses dynamic balance, and crush-resistant damping bearing, which can eliminate vibration effectively.

The classical 1102 18000KV brushless motors have 37mm/50mm cable length versions. 1102 18000KV motors have a good performance in efficiency and the 22000KV version with higher KV value can provide more thrust for aggressive indoor FPV racing. Whether the classical 1102 18000KV or the new 18000KV version, they have the same performance.



Specification

Height: 15.2mm/13.6mm (2022 version)
Weight: 2.95g/pc (18000KV) / 2.79g/pc (22000KV)
Shaft Diameter: 1.5mm
Shaft Length: 5mm
Motor Mount Holes: 3-M1.4-φ6.6
KV (rpm/V): 18000KV/22000KV
Input Voltage: 1S Lipo
Plug and cables: Micro JST-1.25 3-pin connector with 28AWG cables


1102 18000KV or 22000KV Brushless Motors
The 1102 18000KV Brushless motors are the stock motor for Cetus Pro and Meteor75 (1S HD Digital VTX). It features great work efficiency for flying endurance, very suitable for FPV cruising flying. The 1102 22000KV has a higher RPM and faster response, which allows the quadcopter to take off with more punch at less throttle. More aggressive and powerful for FPV racing. For pilots who fly 75mm whoop drones with 1102 18000KV motors, it is a good choice to upgrade motors to 22000KV.



1102 Motor

18000KV Brushless Motors
22000KV Brushless Motors


Application
Cruising, Racing
More powerful for racing


Weight
2.95g/pc
2.79g/pc


Thrust

40.6g (GF-1635-3B)
46.3g (GF-1635-3B)



Efficiency
2.11g/w (GF-1635-3B)

1.90g/w (GF-1635-3B)





Recommend Parts

Battery: BT2.0 450mAh 1S Battery

Frame: Meteor75 Frame

Propellers:  40mm 3-Blade Props

Screws: Meteor Series Motor Fixing Screws Pack (40PCS)

Flight Controller: F4 1S 5A FC / F4 1S 12A AIO Flight Controller




Package


4 * 1102 Brushless Motors (18000KV or 22000KV)
1 * Pack of M1.4*4 Screws



Rated at 5000kv, 1106 Brushless Motor hits the sweet spot for high-powered 4s power. This motor has been designed and built for your 4S 85-120mm racing or freestyle drone, resulting in incredible power and performance.

1102 Brushless Motors

The BETAFPV 1102 18000KV Brushless Motors are suitable for most of the 75mm 1s frames. Paired with BT2.0 connector 300/450mAh battery, the flight time will be longer!

BETAFPV 1102 18000KV Brushless Motors (4pcs)

The BETAFPV 1102 18000KV 37mm Brushless Motor version is the original all-black version with a cable length of 37mm.

BETAFPV 1102 18000KV 37mm Brushless Motor (4Pcs) 

4 Pack of BetaFPV 1102 Brushless Motors for providing stronger thrust in 1S whoop drone, 1102 18000KV motor has released. It is suitable for most of 75mm 1s frame. Paired with BT2.0 connector 300/450mAh battery, the flight time will be longer. Also, It is stock motor of Meteor75. Check out all our 11XX Motors and the r

BetaFPV 1102 Brushless Motor - 18000KV - 4PC

The 18000KV with 37mm cable length.
PACKAGE

4 * 1102 18000KV Brushless Motor


1 * Pack of M1.4*4 Screws



By using the technology of ball bearing, effectively reduced the friction between the bearing surfaces, increased its durability and improved its efficiency. 

BULLET POINTS

Adopts the technology of ball bearing, which effectively reduced the friction between the bearing surfaces, increased the duration of motor and improved its efficiency.


Lead wire soldered to the PCB, which allows you to repair it easier once disconnection.


With exquisite workmanship, provides the most incredible power and thrust in the lightest weight of 3.01g, sturdy structure, and high-quality materials make it performs like a beast.

Possesses dynamic balance, crush-resistant damping bearing, which can eliminate vibration effectively

SPECIFICATION

Height: 15.2mm
Weight: 2.95g /pc
Shaft: φ1.5mm
Motor Mount Holes: 6.6mm

KV (rpm/V): 18000KV
Input Voltage: 1-2S lipo
Plug and cables: Micro JST-1.25 3-pin connector with 30AWG cables




 

The 18000KV with 37mm cable length. BULLET POINTS Adopts the technology of ball bearing, which effectively reduced the friction between the bearing surfaces, increased the duration of motor and improved its efficiency. Lead wire soldered to the PCB, which allows you to repair it easier once disconnection. With exquisite workmanship, provides the most incredible power and thrust in the lightest weight of 3.01g, sturdy structure, and high-quality materials make it performs like a beast. Possesses dynamic balance, crush-resistant damping bearing, which can eliminate vibration effectively SPECIFICATION Height: 15.2mm Weight: 2.95g /pc Shaft: φ1.5mm Motor Mount Holes: 6.6mm KV (rpm/V): 18000KV Input Voltage: 1-2S lipo Plug and cables: Micro JST-1.25 3-pin connector with 30AWG cables

1102 18000kv Motors - 4 Pack

For providing stronger thrust in 1S whoop drone, 1102 18000KV motor has been released. It is suitable for most 75mm 1s frames. Paired with BT2.0 series battery, the flight time will be longer. Check out all our 11XX Motors and the rest of our BetaFPV Products! Features: Adopts the technology of ball bearing, which effe

BetaFPV 1102 18000KV Brushless Motors (2022 Version) - 4PCS

Brushless or Brushed

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

Motor KV

Motor Stator Size

Axis Flying

Axis Flying C135 1303.5 Motor - 5500Kv

Axisflying

The Axisflying C135 1303.5 Motor is specially designed for professional cinematic FPV drones such as the Z20.

Axisflying C135 1303.5 Motor - 5500KV

NewBeeDrone

NewBeeDrone Gold Edition 0802 Motor - 18000Kv



NewBeeDrone has gone brushless! These 0802 18000kv motors were tested and then selected from many different KV and size options to give you the best overall flying experience. With more punch and more top end than traditional brushed motors, these brushless motors bring everything to the next level.


These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25&#39s. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.

These packs are designed for 1s packs such as the Nitro Nectar Gold 300mah HV 1s packs!


Spare motor plugs can be found here.
Spare motor screws can be found here.




Specifications:
 

- 0802 Motor Size
- 18,000kv (Designed for 1s)
- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 24mm cable length
- 2.05g each


What does that mean in terms of performance?

Check out this video from team pilot DZ flying outdoors on 1s using our Nectar gold 300 packs and BeeBrain BL FC.




NewBeeDrone has gone brushless! These 0802 18000kv motors were tested and then selected from many different KV and size options to give you the best overall flying experience. With more punch and more top end than traditional brushed motors, these brushless motors bring everything to the next level. These motors come w

NewBeeDrone 0802 18000kv Brushless Motors - Unibell Gold Edition (Set of 4) from WREKD Co.

NewBeeDrone 0802 18000kv Brushless Motors - Unibell Gold Edition (Set of 4)

NewBeeDrone has gone brushless! These 0802 18000kv motors were tested and then selected from many different KV and size options to give you the best overall flying experience. With more punch and more top end than traditional brushed motors, these brushless motors bring everything to the next level. These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25's. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs. These packs are designed for 1s packs such as the Nitro Nectar Gold 300mah HV 1s packs! Specifications:  - 0802 Motor Size- 18,000kv (Designed for 1s)- 1mm Shaft size- Lead wire solder pads- JST-1.0 Plugs installed - 24mm cable length

NewBeeDrone 0802 18000kv Brushless Motors - Gold Edition (Set of 4)



NewBeeDrone has gone brushless! These 0802 18000kv motors were tested and then selected from many different KV and size options to give you the best overall flying experience. With more punch and more top end than traditional brushed motors, these brushless motors bring everything to the next level.


These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25's. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.

These packs are designed for 1s packs such as the Nitro Nectar Gold 300mah HV 1s packs!


Spare motor plugs can be found here.
Spare motor screws can be found here.




Specifications:
 

- 0802 Motor Size
- 18,000kv (Designed for 1s)
- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 24mm cable length
- 2.05g each


What does that mean in terms of performance?

Check out this video from team pilot DZ flying outdoors on 1s using our Nectar gold 300 packs and BeeBrain BL FC.




NewBeeDrone 0802 18000kv Brushless Motors - Unibell Gold Edition (Set 

NewBeeDrone Silver Edition 0703 Motor - 16420Kv

Introducing the next addition to the NewBeeDrone Brushless Whoop motor series, the 0703 16,420kv Silver Edition! This option is for those looking for a lighter, smoother feel for their brushless 1s FPV drone. These motors are POWERHOUSES on 2s with NBD Azi Props also! 



These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25's. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.

These packs are designed for 1s packs such as the Nitro Nectar Gold 300mah HV 1s packs!



Spare motor plugs can be found here.
Spare motor screws can be found here.


Review Video:



Specifications:
 
- 0703 Motor Size
- 16,420kv 

- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 24mm cable length
- 1.85g each

Introducing the next addition to the NewBeeDrone Brushless Whoop motor series, the 0703 16,420kv Silver Edition! This option is for those looking for a lighter, smoother feel for their brushless 1s FPV drone. These motors are POWERHOUSES on 2s with NBD Azi Props also! These motors come with JST-1.0 plugs installed but 

NewBeeDrone 0703 16420kv Brushless Motors - Silver Edition (Set of 4)

Introducing the next addition to the NewBeeDrone Brushless Whoop motor series, the 0703 16,420kv Silver Edition! This option is for those looking for a lighter, smoother feel for their brushless 1s FPV drone. These motors are POWERHOUSES on 2s with NBD Azi Props also!These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25's. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.These packs are designed for 1s packs such as the Nitro Nectar Gold 300mah HV 1s packs!Spare motor plugs can be found here.Spare motor screws can be found here.Specifications: - 0703 Motor Size- 16,420kv- 1mm Shaft size- Lead wire solder pads- JST-1.0 Plugs installed- 24mm cable length- 1.85g each

Introducing the next addition to the NewBeeDrone Brushless Whoop motor series, the 0703 16,420kv Silver Edition! This option is for those looking for a lighter, smoother feel for their brushless 1s FPV drone. These motors are POWERHOUSES on 2s with NBD Azi Props also!These motors come with JST-1.0 plugs installed but a

Introducing the next addition to the NewBeeDrone Brushless Whoop motor series, the 0703 16,420kv Silver Edition! This option is for those looking for a lighter, smoother feel for their brushless 1s FPV drone. These motors are POWERHOUSES on 2s with NBD Azi Props also! 



These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25&#39s. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.

These packs are designed for 1s packs such as the Nitro Nectar Gold 300mah HV 1s packs!



Spare motor plugs can be found here.
Spare motor screws can be found here.


Review Video:



Specifications:
 
- 0703 Motor Size
- 16,420kv 

- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 24mm cable length
- 1.85g each

NewBeeDrone 0703 16420kv Brushless Motors - Silver Edition (Set of 4) from WREKD Co.

NewBeeDrone Flow 0702 Motor - 29000Kv

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv (Qty 4)

 
Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other.
One of the standout features of this motor is its incredibly lightweight design. Without cables, it weighs only 1.38g, while with cables and plugs, it weighs a mere 1.58g. This makes it one of the lightest motors on the market, giving you a significant advantage in Whoop racing.
In addition to its lightweight design, the Flow 0702 motor is equipped with double ball bearings, providing a super-smooth feeling and longer lifespan for the motor. This ensures that your motor will perform at its best for longer, without any loss in performance.
The motor's 7075 aluminum construction makes it the strongest and most durable motor in its class. It can withstand even the most intense racing conditions, making it an excellent investment for those looking for a reliable and long-lasting motor.
In conclusion, the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv is the perfect motor for those looking to take their Whoop racing to the next level. Its lightweight design, double ball bearings, and sturdy construction make it an excellent choice for anyone looking to optimize their racing experience. Get yours today and experience the thrill of racing like never before!
SET OF (4 MOTORS)

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv (Qty 4)   Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other. One of the stan

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv SET OF (4 MOTORS)

NEWBEEDRONE











Introducing the NewBeeDrone Flow 0702 motor, designed for Whoop racing. It weighs only 1.58g (1.38g without cables) and is equipped with double ball bearings for a smooth, durable performance. Crafted with 7075 aluminum, it stands strong against the toughest racing conditions. Experience peak performance and thrill with this ultimate motor choice. Get yours today and experience the thrill of racing like never before!










Check out our other micro motors and all our NewBeeDrone products!

 Specifications 

Motor KV: 29000 (Designed for 1S)

Internal Resistance (mΩ): 275

Stator Resistance (mΩ): 7

Stator Height (mm): 2

No.of Stator Slots: 9

No.of Rotor Poles: 12

Dynamic balance (mg): ≤10mg

NO-Load Current(A):P 0.90A

Maximum Power (W) 15.2
Maximum Current (A): 3.8

Overall Dimension(mm): Ø1xL12.2

Shaft Diameter(mm):30AWGxL40

ESC(A): 5

Rated Voltage(V): 4.2(1S)

Includes

1x NewBeeDrone Flow 0702 29000Kv Dual Ball Bearing Micro Motor 4 Pack
4x JST1.25 Whoop Motor Plug Replacement
16x M1.4x3 Screws


Introducing the NewBeeDrone Flow 0702 motor, designed for Whoop racing. It weighs only 1.58g (1.38g without cables) and is equipped with double ball bearings for a smooth, durable performance. Crafted with 7075 aluminum, it stands strong against the toughest racing conditions. Experience peak performance and thrill wit

NewBeeDrone Flow 0702 29000Kv Dual Ball Bearing Micro Motor 4 Pack

Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other.  Also check out all our 07XX Motors as well as the rest of our Newbeedrone Products! 

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv (4pack)

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv (4pack)
Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other.
One of the standout features of this motor is its incredibly lightweight design. Without cables, it weighs only 1.38g, while with cables and plugs, it weighs a mere 1.58g. This makes it one of the lightest motors on the market, giving you a significant advantage in Whoop racing.
In addition to its lightweight design, the Flow 0702 motor is equipped with double ball bearings, providing a super-smooth feeling and longer lifespan for the motor. This ensures that your motor will perform at its best for longer, without any loss in performance.
The motor's 7075 aluminum construction makes it the strongest and most durable motor in its class. It can withstand even the most intense racing conditions, making it an excellent investment for those looking for a reliable and long-lasting motor.
In conclusion, the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv is the perfect motor for those looking to take their Whoop racing to the next level. Its lightweight design, double ball bearings, and sturdy construction make it an excellent choice for anyone looking to optimize their racing experience. Get yours today and experience the thrill of racing like never before!
 


NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv (4pack) Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other. One of the stando

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv (4pack)
Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other.
One of the standout features of this motor is its incredibly lightweight design. Without cables, it weighs only 1.38g, while with cables and plugs, it weighs a mere 1.58g. This makes it one of the lightest motors on the market, giving you a significant advantage in Whoop racing.
In addition to its lightweight design, the Flow 0702 motor is equipped with double ball bearings, providing a super-smooth feeling and longer lifespan for the motor. This ensures that your motor will perform at its best for longer, without any loss in performance.
The motor&#39s 7075 aluminum construction makes it the strongest and most durable motor in its class. It can withstand even the most intense racing conditions, making it an excellent investment for those looking for a reliable and long-lasting motor.
In conclusion, the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv is the perfect motor for those looking to take their Whoop racing to the next level. Its lightweight design, double ball bearings, and sturdy construction make it an excellent choice for anyone looking to optimize their racing experience. Get yours today and experience the thrill of racing like never before!
 


NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 29000kv (4pack) from WREKD Co.

NewBeeDrone Flow 0702 Motor - 27000Kv

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv (Qty 4)

 
Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other.
One of the standout features of this motor is its incredibly lightweight design. Without cables, it weighs only 1.38g, while with cables and plugs, it weighs a mere 1.58g. This makes it one of the lightest motors on the market, giving you a significant advantage in Whoop racing.
In addition to its lightweight design, the Flow 0702 motor is equipped with double ball bearings, providing a super-smooth feeling and longer lifespan for the motor. This ensures that your motor will perform at its best for longer, without any loss in performance.
The motor's 7075 aluminum construction makes it the strongest and most durable motor in its class. It can withstand even the most intense racing conditions, making it an excellent investment for those looking for a reliable and long-lasting motor.
In conclusion, the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv is the perfect motor for those looking to take their Whoop racing to the next level. Its lightweight design, double ball bearings, and sturdy construction make it an excellent choice for anyone looking to optimize their racing experience. Get yours today and experience the thrill of racing like never before!
 SET OF (4 MOTORS)

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv (Qty 4)   Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other. One of the stan

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv SET OF (4 MOTORS)

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv (4pack)

Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other.
One of the standout features of this motor is its incredibly lightweight design. Without cables, it weighs only 1.38g, while with cables and plugs, it weighs a mere 1.58g. This makes it one of the lightest motors on the market, giving you a significant advantage in Whoop racing.
In addition to its lightweight design, the Flow 0702 motor is equipped with double ball bearings, providing a super-smooth feeling and longer lifespan for the motor. This ensures that your motor will perform at its best for longer, without any loss in performance.
The motor&#39s 7075 aluminum construction makes it the strongest and most durable motor in its class. It can withstand even the most intense racing conditions, making it an excellent investment for those looking for a reliable and long-lasting motor.
In conclusion, the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv is the perfect motor for those looking to take their Whoop racing to the next level. Its lightweight design, double ball bearings, and sturdy construction make it an excellent choice for anyone looking to optimize their racing experience. Get yours today and experience the thrill of racing like never before!
 

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv (4pack) Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other. One of the stando

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv (4pack) from WREKD Co.

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv (4pack)

NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv (4pack)

Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other.
One of the standout features of this motor is its incredibly lightweight design. Without cables, it weighs only 1.38g, while with cables and plugs, it weighs a mere 1.58g. This makes it one of the lightest motors on the market, giving you a significant advantage in Whoop racing.
In addition to its lightweight design, the Flow 0702 motor is equipped with double ball bearings, providing a super-smooth feeling and longer lifespan for the motor. This ensures that your motor will perform at its best for longer, without any loss in performance.
The motor's 7075 aluminum construction makes it the strongest and most durable motor in its class. It can withstand even the most intense racing conditions, making it an excellent investment for those looking for a reliable and long-lasting motor.
In conclusion, the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv is the perfect motor for those looking to take their Whoop racing to the next level. Its lightweight design, double ball bearings, and sturdy construction make it an excellent choice for anyone looking to optimize their racing experience. Get yours today and experience the thrill of racing like never before!
 

Introducing the NewBeeDrone Flow 0702 Dual Ball Bearing Whoop motor 27000kv, the ultimate choice for Whoop racing enthusiasts! Engineered to perfection, this motor is designed to provide an exceptional racing experience like no other.  Also check out all our 07XX Motors as well as the rest of our Newbeedrone Products! 











Introducing the NewBeeDrone Flow 0702 motor, designed for whoop racing. It weighs only 1.58g (1.38g without cables) and is equipped with double ball bearings for a smooth, durable performance. Crafted with 7075 aluminum, it stands strong against the toughest racing conditions. Experience peak performance and thrill with this ultimate motor choice. Get yours today and experience the thrill of racing like never before!










Check out our other micro motors and all our NewBeeDrone products!

 Specifications 

Motor KV: 27000 (Designed for 1S)

Internal Resistance (mΩ): 285

Stator Resistance (mΩ): 7

Stator Height (mm): 2

No.of Stator Slots: 9

No.of Rotor Poles: 12

Dynamic balance (mg): ≤10mg

NO-Load Current(A):P 0.80A

Maximum Power (W) 15.2
Maximum Current (A): 3.8

Overall Dimension(mm): Ø1xL12.2 

Shaft Diameter(mm): 30AWGxL40

ESC(A):5

Rated Voltage(V): 4.2(1S)

Includes

1x NewBeeDrone Flow 0702 27000Kv Dual Ball Bearing Micro Motor 4 Pack
4x JST1.25 Whoop Motor Plug Replacement
16x M1.4x3 Screws


Introducing the NewBeeDrone Flow 0702 motor, designed for whoop racing. It weighs only 1.58g (1.38g without cables) and is equipped with double ball bearings for a smooth, durable performance. Crafted with 7075 aluminum, it stands strong against the toughest racing conditions. Experience peak performance and thrill wit

NewBeeDrone Flow 0702 27000Kv Dual Ball Bearing Micro Motor 4 Pack

NewBeeDrone Flow 0802 Motor - 27000Kv

NewBeeDrone Flow 0802 Dual Ball Bearing Whoop motor 27000kv (Set of 4)

 Spec:material: 7075 AluminumBearing: NSK Ball Bearing Weight: with cable and plug -2.15g without cable -1.95gInclude4x flow 0802 Double ball bearing motor 27000kv with JST1.0 plug 4x extra JST1.25 plug cable for compatible with other flight controllers 

NewBeeDrone Flow 0802 Dual Ball Bearing Whoop motor 27000kv (Set of 4)  Spec:material: 7075 AluminumBearing: NSK Ball Bearing Weight: with cable and plug -2.15g without cable -1.95gInclude4x flow 0802 Double ball bearing motor 27000kv with JST1.0 plug 4x extra JST1.25 plug cable for compatible with other flight control

NewBeeDrone Flow 0802 Dual Ball Bearing Whoop motor 27000kv (Set of 4)

Check out NewBeeDrone's Flow 0802 dual ball bearing whoop motor 27000kv (Set of 4)
NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 27,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1S whoops. These brushless motors bring everything to the next level. 
Check out our other 0802 motors, and all our NewBeeDrone selection!

Specifications

Motor KV: 27400

Maximum Current: 6.2Amp

Internal Resistance: 142mΩ

Maximum Power: 24.8W

Stator Diameter: 8.4mm

Overall Dimension:Φ11.6 x 12.2mm

Stator Height: 2mm

Shaft Diameter: Φ1 x 4.2mm

No.of Stator Slots: 9

Lead Wire Size: 30AWG x 50mm

ESC(A): 10Amp

Dynamic Balance: ≤10mg

Rated Voltage: 4.2V(1s)

NO-Load Current: 1.60Amp

Includes

4x NewBeeDrone Flow 0802 27000Kv Dual Ball Bearing Micro Motor 4 pack
4x JST1.25 Whoop Motor Plug Replacement
16x M1.4x3 Screws


Check out NewBeeDrone's Flow 0802 dual ball bearing whoop motor 27000kv (Set of 4) NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 27,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1S whoops. These brushless motors bring everything to the next level.  Chec

NewBeeDrone Flow 0802 27000Kv Dual Ball Bearing Micro Motor 4 Pack

NewBeeDrone Flow 0802 27000kv Brushless Motors (Set of 4)
Specifications:
- 0802 Motor Size
- 27,000kv (1S only)
- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 50mm cable length
- 2.16g each
 
Includes:
4* JST1.25 Whoop Motor Plug Replacement
16* M1.4*3 Screws

NewBeeDrone Flow 0802 27000kv Brushless Motors (Set of 4) Specifications: - 0802 Motor Size - 27,000kv (1S only) - 1mm Shaft size - Lead wire solder pads - JST-1.0 Plugs installed - 50mm cable length - 2.16g each   Includes: 4* JST1.25 Whoop Motor Plug Replacement 16* M1.4*3 Screws

NewBeeDrone Flow 0802 27000kv Brushless Motors (Set of 4)

NewBeeDrone Flow 0802 27000kv Brushless Motors (Set of 4)
Specifications:
- 0802 Motor Size
- 27,000kv (1S only)
- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 50mm cable length
- 2.16g each
 
Includes: 
4* JST1.25 Whoop Motor Plug Replacement
16* M1.4*3 Screws

NewBeeDrone Flow 0802 27000kv Brushless Motors (Set of 4) from WREKD Co.

NewBeeDrone Flow 0802 Dual Ball Bearing Whoop motor 27000kv (Set of 4) from WREKD Co.

NewBeeDrone Flow 0802 Motor - 19000Kv

Specifications:
- 0802 Motor Size
- 19,000kv (Designed for 1s)
- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 50mm cable length
- 2.16g each
 Includes:
4* JST1.25 Whoop Motor Plug Replacement  
16* M1.4*3 Screws

Specifications: - 0802 Motor Size - 19,000kv (Designed for 1s) - 1mm Shaft size - Lead wire solder pads - JST-1.0 Plugs installed - 50mm cable length - 2.16g each  Includes: 4* JST1.25 Whoop Motor Plug Replacement   16* M1.4*3 Screws

NewBeeDrone Flow 0802 19000kv Brushless Motors (Set of 4)

NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 19,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1s whoops. These brushless motors bring everything to the next level. 
Check out our other 0802 motors, and all our NewBeeDrone selection!
Specifications

0802 Motor Size
19,000kv (Designed for 1s)
1mm Shaft size
Lead wire solder pads
JST-1.0 Plugs installed
50mm cable length
2.16g each

Includes

4x NewBeeDrone Flow 0802 19000Kv Micro Motors
4x JST1.25 Whoop Motor Plug Replacement
16x M1.4x3 Screws


NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 19,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1s whoops. These brushless motors bring everything to the next level.  Check out our other 0802 motors, and all our NewBeeDrone selection! Specifications 0802

NewBeeDrone Flow 0802 19000Kv Micro Motor 4 Pack

Specifications:
 
- 0802 Motor Size
- 19,000kv (Designed for 1s)
- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 50mm cable length
- 2.16g each
 Includes:
4* JST1.25 Whoop Motor Plug Replacement  
16* M1.4*3 Screws

Specifications:   - 0802 Motor Size - 19,000kv (Designed for 1s) - 1mm Shaft size - Lead wire solder pads - JST-1.0 Plugs installed - 50mm cable length - 2.16g each  Includes: 4* JST1.25 Whoop Motor Plug Replacement   16* M1.4*3 Screws

NewBeeDrone Flow 0802 19000kv Brushless Motors (Set of 4) from WREKD Co.

NewBeeDrone Flow 0802 Dual Ball Bearing Whoop motor 19000kv (Set of 4)

 Spec:material: 7075 AluminumBearing: NSK Ball Bearing Weight: with cable and plug -2.15g without cable -1.95gInclude4x flow 0802 Double ball bearing motor 19000kv with JST1.0 plug 4x extra JST1.25 plug cable for compatible with other flight controllers 

NewBeeDrone Flow 0802 Dual Ball Bearing Whoop motor 19000kv (Set of 4)  Spec:material: 7075 AluminumBearing: NSK Ball Bearing Weight: with cable and plug -2.15g without cable -1.95gInclude4x flow 0802 Double ball bearing motor 19000kv with JST1.0 plug 4x extra JST1.25 plug cable for compatible with other flight control

NewBeeDrone Flow 0802 Dual Ball Bearing Whoop motor 19000kv (Set of 4)

NewBeeDrone Flow 0802 Dual Ball Bearing Whoop motor 19000kv (Set of 4) from WREKD Co.

NewBeeDrone Flow 0802 Motor - 25000Kv

Specifications:
- 0802 Motor Size
- 25,000kv (1S only)
- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 50mm cable length
- 2.15g each
 Includes:
4* JST1.25 Whoop Motor Plug Replacement  
16* M1.4*3 Screws

Specifications: - 0802 Motor Size - 25,000kv (1S only) - 1mm Shaft size - Lead wire solder pads - JST-1.0 Plugs installed - 50mm cable length - 2.15g each  Includes: 4* JST1.25 Whoop Motor Plug Replacement   16* M1.4*3 Screws

NewBeeDrone Flow 0802 25000kv Brushless Motor (Set of 4)

NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 25,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1s whoops. These brushless motors bring everything to the next level. 
Check out our other 0802 motors, and all our NewBeeDrone selection!
Specifications

0802 Motor Size
25,000kv (Designed for 1S)
1mm Shaft size
Lead wire solder pads
JST-1.0 Plugs installed
50mm cable length
2.16g each

Includes

4x NewBeeDrone Flow 0802 25000Kv Micro Motors
4x JST1.25 Whoop Motor Plug Replacement
16x M1.4x3 Screws


NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 25,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1s whoops. These brushless motors bring everything to the next level.  Check out our other 0802 motors, and all our NewBeeDrone selection! Specifications 0802

NewBeeDrone Flow 0802 25000Kv Micro Motor 4 pack

NewBeeDrone Flow 0802 25000kv Brushless Motor (Set of 4) from WREKD Co.

NewBeeDrone Unicorn 6mm Brushed Motor Set

Some awesome looking brushed motors from NewBeeDrone. Rated at an insane 25,500kv, these motors scream, just don't expect to stay in the air long.

Introducing the newest brushed motor from Newbeedrone. With windings made from the tail hairs of the elusive unicorn bee, these are some of the fastest brushed motors out in the wild.
These work best with the cockroach frame if each of the nubs supporting the motors from the bottom are trimmed down 2mm (optional). These are even faster than our Gold Motors. While flight time is decreased, grins per minute are definitely up. If you have been itching for some more speed, give these unicorns a try.
 



Specifications:

Unicorn¬†Edition Motors

KV: 25,500
Speed: 93,000 RPM (@ 3.7V)
Current Load: 1.0A (@ 3.7V, direct drive)
Lifetime Rating: 4-5 hours
No Load Current: 200 mA 
Start Torque: 22 g.cm
Stall Current: 4500 mA
Terminal Resistance: 0.7 Ohms
Operating Voltage: 0.5 - 4.35 V


Dimensions:

Can Diameter: 6mm
Can Length: 17mm
Shaft Diameter: 0.8mm
Shaft Length: 5mm
Weight: 2g 
Wire Length: 30mm

Plug: Micro-JST-1.25


Package Includes:

4 NBD Unicorn motors (2 CW, 2 CCW)


Introducing the newest brushed motor from Newbeedrone. With windings made from the tail hairs of the elusive unicorn bee, these are some of the fastest brushed motors out in the wild. These work best with the cockroach frame if each of the nubs supporting the motors from the bottom are trimmed down 2mm (optional). Thes

NewBeeDrone BDR Unicorn Edition Motors - 6mm Brushed Motors

NewBeeDrone BDR Unicorn Edition Motors - 6mm Brushed Motors
 
Introducing the newest brushed motor from Newbeedrone. With windings made from the tail hairs of the elusive unicorn bee, these are some of the fastest brushed motors out in the wild.
These work best with the cockroach frame if each of the nubs supporting the motors from the bottom are trimmed down 2mm (optional). These are even faster than our Gold Motors. While flight time is decreased, grins per minute are definitely up. If you have been itching for some more speed, give these unicorns a try.
 
Specifications:

Unicorn¬†Edition Motors

KV: 25,500
Speed: 93,000 RPM (@ 3.7V)
Current Load: 1.0A (@ 3.7V, direct drive)
Lifetime Rating: 4-5 hours
No Load Current: 200 mA 
Start Torque: 22 g.cm
Stall Current: 4500 mA
Terminal Resistance: 0.7 Ohms
Operating Voltage: 0.5 - 4.35 V


Dimensions:

Can Diameter: 6mm
Can Length: 17mm
Shaft Diameter: 0.8mm
Shaft Length: 5mm
Weight: 2g 
Wire Length: 30mm

Plug: Micro-JST-1.25


Package Includes:

4 NBD Unicorn motors (2 CW, 2 CCW)


NewBeeDrone BDR Unicorn Edition Motors - 6mm Brushed Motors   Introducing the newest brushed motor from Newbeedrone. With windings made from the tail hairs of the elusive unicorn bee, these are some of the fastest brushed motors out in the wild. These work best with the cockroach frame if each of the nubs supporting th

Happymodel

Happymodel EX1202.5 Motor - 11500Kv

Give your micro quad maximum power with the Happymodel EX1202.5 motor! Check out our 1202.5 Motors, the Happymodel Crux3 Collection, and the rest of our Happymodel Products! Features This motor is the stock motor on the Crux3. Specifications Dimension(Dia.*Len):15mm*15mm Inner Shaft Diameter: 2mm Out Shaft Diameter:1.5

Happymodel EX1202.5 Motor - 11500KV

Give your micro quad maximum power with the Happymodel EX1202.5 CCW motor!

Happymodel EX1202.5 Motor (CCW) - 11500KV

Happymodel EX1103 Motor - 11000Kv

The Happymodel EX1103 11000KV motor is a replacement or spare motor for the Happymodel Bassline 2S. Great for toothpick builds!

Happymodel EX1103 Bassline Motor - 11000KV (CW)

HAPPYMODEL

The Happymodel SE0702 11000KV are the direct replacement motors for the Bassline 2S, so RDQ has you covered! It will also work great one any 2" Toothpick style drone. 
Check out our other micro motors, and all our HappyModel selection!

Specifications

Kv: 11000Kv 

Input Voltage: 1SS LiPo


Configuration: 9N12P


Motor Dimensions: Φ13.5mm x 15.5mm


Stator Dimensions: Φ11mm x 3mm

Shaft Diameter: Φ1.5mm
Mounting Pattern: Φ7mm

Weight: 3.8g


Includes

1x HappyModel EX1103 11000Kv Micro Motor
4x Motor Screws

Note: this motor is sold by HappyModel as a mix of CW &amp CCW options. These should be interchangeable, but if for some reason the rotation of the motor is not going the direction you desire, then you can simply reverse the settings in BLHeli or swap any two motor wires to reverse the direction.

The Happymodel SE0702 11000KV are the direct replacement motors for the Bassline 2S, so RDQ has you covered! It will also work great one any 2" Toothpick style drone.  Check out our other micro motors, and all our HappyModel selection! Specifications Kv: 11000Kv Input Voltage: 1SS LiPo Configuration: 9N12P Motor Dimens

HappyModel EX 1103 11000Kv Micro Motor

This is a replacement motor for the Happymodel Baseline 2" FPV Drone Frame. It will also work great one any 2" Toothpick style drone. Check out the rest of our 11XX Motors and Happymodel Products! Specifications: Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):

Happymodel EX1103 11000KV Brushless FPV Drone Motor for Happymodel Baseline (1 Pc.)

HappyModel SE0702 Motor - 28000Kv

Introducing the Happymodel SE0702 Motor - 28000KV, delivering unmatched speed and agility for micro FPV enthusiasts. Crafted for precision and durability, it ensures thrilling flights for both seasoned pilots and newcomers alike.

Happymodel SE0702 FPV Motor - 28000KV












Make your drone projects even better with this HappyModel SE0702 0702 28000Kv Micro Motor. Its high-quality design offers efficient operation and reliable performance, giving your projects the boost they need. Make the most of your flying with this micromotor. These motors come with a JST 1.25 plug-in piece for a secure connection for HappyModel boards as with BetaFPV too.











Check out our other  Micro Motors, and all our HappyModel selection!


Specifications

Brand Name: Happymodel

Mode: SE0702

KV Option: KV28000

Configuration: 9N12P

Stator Diameter: 7mm

Stator Length: 2mm

Shaft Diameter: Φ1mm

Motor Dimension(Dia.xLen):Φ 9.5mmx14mm

Weight(g): 1.5g

No.of Cells(Lipo): 1S only

Includes

1x HappyModel SE0702 0702 28000Kv Micro Motor - Choose Rotation (CW or CCW)
4x Motor Hardware


Make your drone projects even better with this HappyModel SE0702 0702 28000Kv Micro Motor. Its high-quality design offers efficient operation and reliable performance, giving your projects the boost they need. Make the most of your flying with this micromotor. These motors come with a JST 1.25 plug-in piece for a secur

HappyModel SE0702 0702 28000Kv Micro Motor - Choose Rotation

The Happymodel SE0702 28000KV 1S Motor is set to revolutionize the tiny whoop scene with its exceptional lightness and high performance. 

Happymodel SE0702 1S Motor - 28000KV

NewBeeDrone Espresso Edition 0802 Motor - 14000Kv

NewBeeDrone 0802 14000KV Brushless Motors - Unibell Espresso Edition (Set of 4)

This is our second generation motor design, we use unibell on this motor at the same time we switch to double step shaft. Without the C-Clips on top of the bell will make the motor balance to the next level.  This motor is design to operate under 2S voltage ( 7.4V) 

These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25's. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.

Note: These motors require a high performance battery such as the Nitro Nectar Gold 300mah HV 1s packs!




Spare motor plugs can be found here.
Spare motor screws can be found here.



Specifications:
 

- 0802 Motor Size
- 14,000KV (Designed for 2s)
- 1mm double step Shaft
- Lead wire solder pads
- JST-1.0 Plugs installed
- 50mm cable length
- 2.08 grams each with wire and plug



NewBeeDrone 0802 14000KV Brushless Motors - Unibell Espresso Edition (Set of 4) This is our second generation motor design, we use unibell on this motor at the same time we switch to double step shaft. Without the C-Clips on top of the bell will make the motor balance to the next level.  This motor is design to operate

NewBeeDrone 0802 14000KV Brushless Motors - Unibell Espresso Edition (Set of 4)

NewBeeDrone 0802 14000KV Brushless Motors - Unibell Espresso Edition (

NewBeeDrone 0802 14000KV Brushless Motors - Unibell Espresso Edition (Set of 4)

This is our second generation motor design, we use unibell on this motor at the same time we switch to double step shaft. Without the C-Clips on top of the bell will make the motor balance to the next level.  This motor is design to operate under 2S voltage ( 7.4V) 

These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25&#39s. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.

Note: These motors require a high performance battery such as the Nitro Nectar Gold 300mah HV 1s packs!




Spare motor plugs can be found here.
Spare motor screws can be found here.



Specifications:
 

- 0802 Motor Size
- 14,000KV (Designed for 2s)
- 1mm double step Shaft
- Lead wire solder pads
- JST-1.0 Plugs installed
- 50mm cable length
- 2.08 grams each with wire and plug



NewBeeDrone 0802 14000KV Brushless Motors - Unibell Espresso Edition (Set of 4) from WREKD Co.

NewBeeDrone Flow 1202 Motor - 8420Kv

The NewBeeDrone FLOW 1202 is a micro T-mount styled motor that comes in two KV options: 8420KV and 11420KV. This motor is suitable for racing and freestyle drones! 

NewBeeDrone FLOW 1202 8420KV/11420KV Motor - T-Mount (Set of 4)

Specifications:
- 4.5g w/ wire
- Titanium Alloy TC4 Shaft
- NSK  Ball Bearing
- 0.2mm Silicon Steel Sheets Core
- 30AWG silicone wire with JST1.25 3Pin connector total length 60mm
- 7075 Aluminum Alloy
- 8420KV for 2S battery / 11420KV for 1S battery
- 1.5mm shaft
- 9mm X mounting screw pattern


Specifications: - 4.5g w/ wire - Titanium Alloy TC4 Shaft - NSK  Ball Bearing - 0.2mm Silicon Steel Sheets Core - 30AWG silicone wire with JST1.25 3Pin connector total length 60mm - 7075 Aluminum Alloy - 8420KV for 2S battery / 11420KV for 1S battery - 1.5mm shaft - 9mm X mounting screw pattern

NewBeeDrone FLOW 1202 Racing and Freestyle FPV Micro Motor (Set of 4) 8420KV/11420KV from WREKD Co.

NewBeeDrone FLOW 1202 Racing and Freestyle FPV Micro Motor (Set of 4) 8420KV/11420KV

NewBeeDrone FLOW 1202 Racing and Freestyle FPV Micro Motor (Set of 4) 

NewBeeDrone Flow 1102 Motor - 19000Kv


The NewBeeDrone FLOW 1102 Motors fill the gap between 0802 and 1202 motors. It brings extra power to the Acrobee75 and MosquitoXL Frame. If you need to carry an HD System on both of the frame, this motor is a good option for the setup.
Specifications:
- 3.47g w/ wire
- Titanium Alloy TC4 Shaft
- NSK  Ball Bearing
- 0.2mm Silicon Steel Sheets Core
- 50mm cable length with JST1.0 Plug to work with all BeeBrainBL Flight Controller
- 7075 Aluminum Alloy
- 10000KV for 2S battery / 19000KV for 1S battery
- 1.5mm shaft
- Whoop motor mount that can fit in with all Cockroach Frame and the Mosquito frame.

The NewBeeDrone FLOW 1102 Motors fill the gap between 0802 and 1202 motors. It brings extra power to the Acrobee75 and MosquitoXL Frame. If you need to carry an HD System on both of the frame, this motor is a good option for the setup. Specifications: - 3.47g w/ wire - Titanium Alloy TC4 Shaft - NSK  Ball Bearing - 0.2

NewBeeDrone FLOW 1102 Motor - 19000KV (4 Pack) from WREKD Co.

NewBeeDrone FLOW 1102 Motor - 19000KV (4 Pack)

NewBeeDrone Flow 1102 Motor - 10000Kv

NewBeeDrone FLOW 1102 Motor - 10000KV (4 Pack)
The NewBeeDrone FLOW 1102 Motors fill the gap between 0802 and 1202 motors. It brings extra power to the Acrobee75 and MosquitoXL Frame. If you need to carry an HD System on both of the frame, this motor is a good option for the setup.
Specifications:
- 3.47g w/ wire
- Titanium Alloy TC4 Shaft
- NSK  Ball Bearing
- 0.2mm Silicon Steel Sheets Core
- 50mm cable length with JST1.0 Plug to work with all BeeBrainBL Flight Controller
- 7075 Aluminum Alloy
- 10000KV for 2S battery / 19000KV for 1S battery
- 1.5mm shaft
- Whoop motor mount that can fit in with all Cockroach Frame and the Mosquito frame.
- Comes with 3mm screws. 

NewBeeDrone FLOW 1102 Motor - 10000KV (4 Pack) The NewBeeDrone FLOW 1102 Motors fill the gap between 0802 and 1202 motors. It brings extra power to the Acrobee75 and MosquitoXL Frame. If you need to carry an HD System on both of the frame, this motor is a good option for the setup. Specifications: - 3.47g w/ wire - Tit

NewBeeDrone FLOW 1102 Motor - 10000KV (4 Pack)

NewBeeDrone FLOW 1102 Motor - 10000KV (4 Pack) from WREKD Co.

NewBeeDrone Flow 0804 Motor - 12000Kv

Introducing the first Dual Ball Bearing 08 size motor. It is also the smallest motor under our Flow motor product line. Making a double Ball bearing whoop motor had been a challenge in our industry. High RPM, Limited space from the motor stators, Heat, all of these factor had been stopping people to make whoop size motor with dual ball bearing. We had been trying to prototyping and testing dual ball bearing 08 size motor back in 2020. Finally we find a way to make it work. We are using two 681XZZ ball bearing on this design. The Flow motor design gives this motor a better performance on cooling also structure strength. We are also using 7075 Aluminum Alloy on this motor. This is probably the first 08 size motor to use 7075 aluminum Alloy. The Motor still comes with PCB Board on the bottom to have the ability to swap motor wire. It also comes with more different KV option. 12000KV is good for 2S setup. 19000KV is the best balance KV we prefer everyone to use. 25000KV is crazy fast and perfect for racing.
These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25's. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.

Note: These motors require a high performance battery such as the Nitro Nectar Gold



Spare motor plugs can be found here.
Spare motor screws can be found here.

Recommend setup
Frame: Cockroach75 and Mosquito and MosquitoXL 
Props: 40mm Azi Prop  or Gemfan 65mmS prop




Specifications:
 



- 0804 Motor Size
- 7075 Aluminum Alloy 
- 12,000KV (Designed for 2s) 19,000KV for best efficient and balance
- 25,000KV for Racing
- 1mm double step Shaft
- Lead wire solder pads
- JST-1.0 Plugs installed also come with spare 1.25 plug with 50mm wire
- 50mm cable length
- 2.85 grams each without wire and plug


Introducing the first Dual Ball Bearing 08 size motor. It is also the smallest motor under our Flow motor product line. Making a double Ball bearing whoop motor had been a challenge in our industry. High RPM, Limited space from the motor stators, Heat, all of these factor had been stopping people to make whoop size mot

NewBeeDrone Flow 0804 Dual Ball-Bearing Whoop Motor 12000KV&19000KV&25000KV (4PACK)

NewBeeDrone Flow 0804 Dual Ball-Bearing Whoop Motor 12000KV&19000KV&25

Introducing the first Dual Ball Bearing 08 size motor. It is also the smallest motor under our Flow motor product line. Making a double Ball bearing whoop motor had been a challenge in our industry. High RPM, Limited space from the motor stators, Heat, all of these factor had been stopping people to make whoop size motor with dual ball bearing. We had been trying to prototyping and testing dual ball bearing 08 size motor back in 2020. Finally we find a way to make it work. We are using two 681XZZ ball bearing on this design. The Flow motor design gives this motor a better performance on cooling also structure strength. We are also using 7075 Aluminum Alloy on this motor. This is probably the first 08 size motor to use 7075 aluminum Alloy. The Motor still comes with PCB Board on the bottom to have the ability to swap motor wire. It also comes with more different KV option. 12000KV is good for 2S setup. 19000KV is the best balance KV we prefer everyone to use. 25000KV is crazy fast and perfect for racing.
These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25&#39s. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.

Note: These motors require a high performance battery such as the Nitro Nectar Gold



Spare motor plugs can be found here.
Spare motor screws can be found here.

Recommend setup
Frame: Cockroach75 and Mosquito and MosquitoXL 
Props: 40mm Azi Prop  or Gemfan 65mmS prop




Specifications:
 



- 0804 Motor Size
- 7075 Aluminum Alloy 
- 12,000KV (Designed for 2s) 19,000KV for best efficient and balance
- 25,000KV for Racing
- 1mm double step Shaft
- Lead wire solder pads
- JST-1.0 Plugs installed also come with spare 1.25 plug with 50mm wire
- 50mm cable length
- 2.85 grams each without wire and plug


NewBeeDrone Flow 0804 Dual Ball-Bearing Whoop Motor 12000KV&19000KV&25000KV (4PACK) from WREKD Co.

Sub250

Sub250 M1 0803 Motor - 19000Kv

Sub250&#39s Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the motor intended for this frame with matching color!!
Check out our vast motor selection as well as the rest of our Sub250 selection!
Specifications

Input Voltage: 1S
Kv Rating: 19000Kv
Configuration: 9N12P

Shaft Diameter: 1.5mm

Weight (Incl. Cable): 2.2g

Mounting Pattern: 6x6mm TRI

Includes

1x Sub250 M1 0803 19000Kv Micro/Whoop Motor



Sub250's Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the motor intended for this frame with matching color!! Check out our vast motor selection as well as the rest of our Sub250 selection! Specifications Input Voltage: 1S Kv Rating: 19000Kv Configuration: 9N12P Shaft Dia

Sub250 M1 0803 19000Kv Micro/Whoop Motor from WREKD Co.

Sub250 M1 0803 19000Kv Micro/Whoop Motor

SUB250

Sub250's Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the motor intended for this frame with matching color!!
Check out our vast motor selection as well as the rest of our Sub250 selection!
Specifications

Input Voltage: 1S
Kv Rating: 19000Kv
Configuration: 9N12P

Shaft Diameter: 1.5mm

Weight (Incl. Cable): 2.2g

Mounting Pattern: 6x6mm TRI

Includes

1x Sub250 M1 0803 19000Kv Micro/Whoop Motor



Sub250&#39s Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the motor intended for this frame with matching color!!
Check out our vast motor selection as well as the rest of our Sub250 selection!
Specifications

Input Voltage: 1S
Kv Rating: 19000Kv
Configuration: 9N12P

Shaft Diameter: 1.5mm

Weight (Incl. Cable): 2.2g

Mounting Pattern: 6x6mm TRI

Includes

4x Sub250 M1 0803 19000Kv Micro/Whoop Motor



Sub250 M1 0803 19000Kv Micro/Whoop Motor 4 Pack from WREKD Co.

Sub250 M1 0803 19000Kv Micro/Whoop Motor 4 Pack

Sub250's Nanofly16 1S frame is one of the lightest and most nimble carbon fiber frames out! Check out the motor intended for this frame with matching color!!
Check out our vast motor selection as well as the rest of our Sub250 selection!
Specifications

Input Voltage: 1S
Kv Rating: 19000Kv
Configuration: 9N12P

Shaft Diameter: 1.5mm

Weight (Incl. Cable): 2.2g

Mounting Pattern: 6x6mm TRI

Includes

4x Sub250 M1 0803 19000Kv Micro/Whoop Motor



Sub250 1002 Motor - 21000Kv











Sub250's M2 1002 brushless motor is specially designed for 1.6-2 inch FPV Drones, with strong power, small size and lightweight design. It uses imported N52H magnetic steel and high-temperature resistant coil, ball bearings, and a three-blade rotor for good structural rigidity and heat dissipation. 










Check out our vast motor selection as well as the rest of our Sub250 selection!
Features

Small in size and lightweight, only 2.6g.
N52H strong magnetic magnet, high-temperature resistant coil, full of power.
Using imported ball bearings, the motor has high efficiency and long service life.
Low loss stator, low heat generation, and high efficiency.
With fine motor dynamic balance adjustment, the motor runs smoothly and stably.
Suitable for 1.6 -2 inch mini FPV drones.
The 1.5mm shaft diameter is suitable for most propellers on the market.

Specifications


Brand Name: Sub250


Product: M2 1002 Brushless Motor


KV value: 21000


Working voltage: 4.35V (1S)


Configuration: 9N12P


Stator diameter: 10mm


Stator height: 2mm


Outlet diameter: Φ1.5mm


Dimensions: Φ13.83mm x 7.75mm


Magnet: N52H


Weight: 2.6g (5cm wire)


Applicable model: 1.6- 2-inch FPV drones


Recommended battery: 1S 380mAh-530mAh LiPo


Includes

1x Sub250 1002 21000Kv Micro Motor - Black/Silver (1.5mm Shaft)

4x M1.4 x 3mm screw



Sub250's M2 1002 brushless motor is specially designed for 1.6-2 inch FPV Drones, with strong power, small size and lightweight design. It uses imported N52H magnetic steel and high-temperature resistant coil, ball bearings, and a three-blade rotor for good structural rigidity and heat dissipation.  Check out our vast 