FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Walksnail

Walksnail Avatar HD V2 VTX Module - Dual Antenna Version

The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. 
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

The module includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, it&#39s better to protect the VTX.
The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.
The module includes a spare power pad, providing an extra opportunity for welding.


A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.





Specifications

Model: Avatar V2 module(Dual Antenna)

Communication Frequency: 725-5.850GHz

Transmitter Power (EIRP): FCC:&amplt30dBmCE:&amplt14dBmSRRC:&amplt20dBm MIC:&amplt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 32G

Recording: 1080p/720p

Weight: 15.4g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency: Average delay 22ms

Antenna: 2(IPEX)

Includes

1x Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)


The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide

Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version) from WREKD Co.

Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)

The Walksnail Avatar HD VTX Module V2 provides superior performance with a range of features, including 25*25mm and 20*20mm mounting holes, optimized antenna installation, frequency binding button, spare power pad and 32GB built-in storage for 1080P or 720P HD fly videos. Increased TVS protection and support for up to 

Walksnail Avatar HD VTX V2 Module Dual Antennas Version 32G (VTX ONLY) for Walksnail Avatar/Fatshark Dominator HD FPV System

The Walksnail Avatar HD VTX V2 is a versatile VTX module compatible with dual antennas. 

Walksnail Avatar HD VTX V2 Module - 32GB Dual Antennas Version

CADDX

The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. 
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

The module includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, it's better to protect the VTX.
The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.
The module includes a spare power pad, providing an extra opportunity for welding.


A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.





Specifications

Model: Avatar V2 module(Dual Antenna)

Communication Frequency: 725-5.850GHz

Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 32G

Recording: 1080p/720p

Weight: 15.4g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency: Average delay 22ms

Antenna: 2(IPEX)

Includes

1x Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)


Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Versio

<div style="text-align: center" data-mce-fragment="1" data-mce-style="text-align: center">
<h3 style="text-align: left" data-mce-style="text-align: left">Bullet Points：<br>
</h3>
</div>
<div data-mce-fragment="1" data-mce-style="text-align: center">
<ul>
<li>The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.</li>
<li>Updated the design of PCB board and shell, improved the quality of VTX, more durable.</li>
<li>Optimized the installation place of the antenna, it's better to protect the VTX.</li>
<li>The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.</li>
<li>The kit includes a spare power pad, providing an extra opportunity for welding.</li>
</ul>
</div>
<div data-mce-fragment="1" data-mce-style="text-align: center">
<div style="text-align: left" data-mce-style="text-align: left"><img alt="" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/5_a74bf4a9-87aa-4ca8-bc05-0c352e5b4676.jpg?v=1697782652"></div>
</div>
<div style="text-align: center" data-mce-fragment="1" data-mce-style="text-align: center">
<div style="text-align: left" data-mce-style="text-align: left">
<div style="text-align: left" data-mce-fragment="1" data-mce-style="text-align: left">
<ul>
<li>The Avatar VTX comes with 32g built-in storage it can record 1080P or 720P HD fly videos without interference. 32G built-in storage, recording video time increased by 4 times.</li>
</ul>
<p><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/7_a3368129-fde3-4c9c-9bea-7832b77c11f7.jpg?v=1695276608" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/7_a3368129-fde3-4c9c-9bea-7832b77c11f7.jpg?v=1695276608" data-mce-style="float: none"></p>
</div>
</div>
<div style="text-align: center" data-mce-style="text-align: center">
<div style="text-align: center" data-mce-style="text-align: center">
<div style="text-align: left" data-mce-style="text-align: left">
<article data-identifier-application__slash__x-doc-key="v1GXn4x3DLeonDQ4" data-identifier-application__slash__x-cangjie-fragment="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" data-clipboard-cangjie='["root",{"copyFrom":1329378339},["p",{"uuid":"lei4y6iyyt3vq4ejxk","ind":{"left":0},"list":{"listId":"y6t50qxp2xn","level":0,"isOrdered":false,"isTaskList":false,"isChecked":false,"listStyleType":"SCIR_ECIR_SREC","symbolStyle":{"shd":"#FFFFFF"},"listStyle":{"format":"bullet","text":"●","align":"left"},"hideSymbol":false,"extraData":{}}},["span",{"data-type":"text"},["span",{"highlight":"#FFFFFF","data-type":"leaf"},"TVS added, up to 8S"]]]]'>
<ul>
<li>New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.</li>
</ul>
</article>
<article data-identifier-application__slash__x-doc-key="v1GXn4x3DLeonDQ4" data-identifier-application__slash__x-cangjie-fragment="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" data-clipboard-cangjie='["root",{"copyFrom":1329378339},["p",{"uuid":"lei4y6iyyt3vq4ejxk","ind":{"left":0},"list":{"listId":"y6t50qxp2xn","level":0,"isOrdered":false,"isTaskList":false,"isChecked":false,"listStyleType":"SCIR_ECIR_SREC","symbolStyle":{"shd":"#FFFFFF"},"listStyle":{"format":"bullet","text":"●","align":"left"},"hideSymbol":false,"extraData":{}}},["span",{"data-type":"text"},["span",{"highlight":"#FFFFFF","data-type":"leaf"},"TVS added, up to 8S"]]]]'><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/6_290966f5-24c6-4f62-a7be-716aaca90ffd.jpg?v=1695276215" style="margin-bottom: 16px float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/6_290966f5-24c6-4f62-a7be-716aaca90ffd.jpg?v=1695276215" data-mce-style="margin-bottom: 16px float: none"></article>
<article data-identifier-application__slash__x-doc-key="v1GXn4x3DLeonDQ4" data-identifier-application__slash__x-cangjie-fragment="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" data-clipboard-cangjie='["root",{"copyFrom":1329378339},["p",{"uuid":"lei4y6iyyt3vq4ejxk","ind":{"left":0},"list":{"listId":"y6t50qxp2xn","level":0,"isOrdered":false,"isTaskList":false,"isChecked":false,"listStyleType":"SCIR_ECIR_SREC","symbolStyle":{"shd":"#FFFFFF"},"listStyle":{"format":"bullet","text":"●","align":"left"},"hideSymbol":false,"extraData":{}}},["span",{"data-type":"text"},["span",{"highlight":"#FFFFFF","data-type":"leaf"},"TVS added, up to 8S"]]]]'></article>
</div>
<div style="text-align: center" data-mce-style="text-align: center">
<table width="100%">
<tbody>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left"><strong>Specification</strong></td>
<td style="text-align: left" data-mce-style="text-align: left"></td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left"><strong>VTX</strong></td>
<td style="text-align: left" data-mce-style="text-align: left"> </td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Model</td>
<td style="text-align: left" data-mce-style="text-align: left">Avatar V2 module(Dual Antenna)</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Communication Frequency</td>
<td style="text-align: left" data-mce-style="text-align: left">5.725-5.850GHz</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Transmitter Power (EIRP)</td>
<td style="text-align: left" data-mce-style="text-align: left">FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">1/O Interface</td>
<td style="text-align: left" data-mce-style="text-align: left">JST1.0*4(Power in)JST0.8*6(USB)</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Mounting Holes</td>
<td style="text-align: left" data-mce-style="text-align: left">25.5*25.5mm 20*20mm</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Dimensions</td>
<td style="text-align: left" data-mce-style="text-align: left">33*33*<span style="color: #000000" data-mce-style="color: #000000">10.5</span>mm</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Storage</td>
<td style="text-align: left" data-mce-style="text-align: left">32G</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Recording</td>
<td style="text-align: left" data-mce-style="text-align: left">1080P/720P</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Weight</td>
<td style="text-align: left" data-mce-style="text-align: left">15.4g<br>
</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Operating Temperature</td>
<td style="text-align: left" data-mce-style="text-align: left">-20-40℃</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Channels</td>
<td style="text-align: left" data-mce-style="text-align: left">8</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Wide Power Input</td>
<td style="text-align: left" data-mce-style="text-align: left">6V-<span style="color: #000000" data-mce-style="color: #000000">25.2</span>V</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Supported FC System</td>
<td style="text-align: left" data-mce-style="text-align: left">Betaflight Inav Fettec ArduPilotKiss</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">OSD</td>
<td style="text-align: left" data-mce-style="text-align: left">Canvas mode</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Latency</td>
<td style="text-align: left" data-mce-style="text-align: left">Average delay 22ms</td>
</tr>
<tr>
<td style="text-align: left" data-mce-style="text-align: left">Antenna</td>
<td style="text-align: left" data-mce-style="text-align: left">2(IPEX)</td>
</tr>
</tbody>
</table>
</div>
</div>
</div>
</div>

Bullet Points： The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models. Updated the design of PCB board and shell, improved the quality of VTX, more durable. Optimized the installation place of the antenna, it's better to protect the VTX. The position

Walksnail Avatar HD VTX V2 Module (Dual Antennas Version) – CADDX FPV


Bullet Points：




The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved th

Walksnail Avatar HD VTX V2 Module (Dual Antennas Version)

VTX Frequency

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.

Video Transmitters

VTX Stack Mount

VTX Antenna Connector

Max Transmission Power

Digital / Analog VTX

FPV Camera Included

HDZero

HDZero Freestyle V2 1W Digital HD VTX

Divimath


HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees protection and durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Moreover, the antenna and MIPI cable are secured with a retention bar and screws. This VTX supports 720p60, 1080p30, 540p60, and 540p90 video modes. 












This VTX can fit most frames that can accommodate the Caddx Vista/Runcam Link VTX.











Check out all our VTXs and our HDZero selection.

Specification

Manufacturer:  Divimath, Inc
Model:  HDZero Freestyle V2 VTX
Weight:  22.3g
Dimensions:  29x30x14mm
Operating Frequency:  5.725-5.850GHz
Transmitter Power:  25mW, 200mW, XXXXmW
Mounting Pattern:  20x20mm M2 Holes
Antenna Interface:  Secured u.FL
Video In:  Secured MIPI
SmartAudio:  YES
MSP Canvas Mode:  YES
Input Power:  7-25V
Operating Temperature:  32F-104F (0-40C)
Power Consumption:  6-15W

Includes

1x  HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL

1x Power Cable


1x SA Cable


1x Plastic bar for MIPI Cable with 3x Screws (M1.4 x 2mm)


1x Plastic bar for U.FL with 3x Screws (M1.4 x 8mm)

1x Double Sided Tape (29 x 30 x 1mm)

Wiring Diagram



HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees protection and durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Mor

HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL from WREKD Co.

HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL

The HDZero Freestyle V2 VTX is a 2nd generation 5.8GHz digital video transmitter that can fit most of the 3.5-inch and 5-inch drones.&nbsp

The HDZero Freestyle V2 VTX is a 2nd generation 5.8GHz digital video transmitter that can fit most of the 3.5-inch and 5-inch drones. 

HDZero Freestyle V2 VTX

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Manufacturer &#009&#009&#009&#009&#009&#009&#009&#009&#009    Divimath, Inc&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Model&#009&#009&#009&#009&#009&#009&#009&#009&#009    HDZero Freestyle V2 VTX&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight&#009&#009&#009&#009&#009&#009&#009&#009&#009    22.3 g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Dimensions&#009&#009&#009&#009&#009&#009&#009&#009&#009    29x30x14mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Frequency &#009&#009&#009&#009&#009&#009&#009&#009&#009    5.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Transmitter Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    25mW,200mW&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting Pattern&#009&#009&#009&#009&#009&#009&#009&#009&#009    20x20mm M2 holes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Antenna Interface&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured U.FL &#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video In&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured MIPI&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SmartAudio&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009MSP Canvas Mode&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Input Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    7-25V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Temperature&#009&#009&#009&#009&#009&#009&#009&#009&#009    32˚F-104 ˚F (0˚-40˚C)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power Consumption&#009&#009&#009&#009&#009&#009&#009&#009&#009    6-15W&#009&#009&#009&#009&#009&#009  Includes &#0091x Freestyle V2 VTX&#0091x Power Cable&#0091x SA Cable&#0091x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).&#0091x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)&#0091x Double Sided Tape (29 x 30 x 1mm)

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  									Manufacturer 									    Divimath, Inc													Model									    HDZero Freestyle V2 VTX													Weight									    22.3 g													Dimensions									    29x30x14mm													Operating Frequency 									    5.725-5.850GHz													Transmitter Power									    25mW,200mW													Mounting Pattern									    20x20mm M2 holes													Antenna Interface									    Secured U.FL 													Video In									    Secured MIPI													SmartAudio									    Yes													MSP Canvas Mode									    Yes													Input Power									    7-25V													Operating Temperature									    32˚F-104 ˚F (0˚-40˚C)													Power Consumption									    6-15W						  Includes 	1x Freestyle V2 VTX	1x Power Cable	1x SA Cable	1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).	1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)	1x Double Sided Tape (29 x 30 x 1mm)

HDZero Freestyle V2 VTX | HDZERO

HDZero Freestyle V2 20x20 25-1000mW HD VTX - U.FL

HDZERO

Walksnail Avatar HD Mini V3 VTX Module

<div>
<h3 style="text-align: left" data-mce-style="text-align: left">Bullet Point for<span> Walksnail Avatar HD Mini VTX V3</span>
</h3>
</div>
<ul data-mce-fragment="1">
<li data-mce-fragment="1">Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range.<br data-mce-fragment="1">
</li>
</ul>
<div style="text-align: left" data-mce-fragment="1" data-mce-style="text-align: left"><img style="margin-bottom: 16px float: none" src="https://cdn.shopifycdn.net/s/files/1/0036/3921/4169/files/4-1_462c3eb5-5e1d-4703-a1fb-bfb2438873b9.jpg?v=1691030782" alt="with 3.1-13V voltage input and 500mw power output"></div>
<div data-mce-fragment="1">
<ul data-mce-fragment="1">
<li data-mce-fragment="1">The Avatar vtx comes with 32g built-in storage, it can record 1080p HD and interference-free flight footages without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.</li>
</ul>
</div>
<div style="text-align: left" data-mce-fragment="1" data-mce-style="text-align: left"><img style="margin-bottom: 16px float: none" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/6_d4a86908-e826-4eee-a7d8-a5b2c578d038_480x480.jpg?v=1690870738" alt="32g built-in storage" data-mce-fragment="1" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/6_d4a86908-e826-4eee-a7d8-a5b2c578d038_480x480.jpg?v=1690870738"></div>
<div style="text-align: left" data-mce-fragment="1" data-mce-style="text-align: left">
<p>Note：<a href="https://caddxfpv.com/products/avater-kit-usb-cable?variant=44730685161774" data-mce-fragment="1" data-mce-href="https://caddxfpv.com/products/avater-kit-usb-cable?variant=44730685161774" target="_blank">USB Cable</a><span data-mce-fragment="1"> needs to be purchased separately</span></p>
<table width="100%">
<tbody>
<tr>
<td>
<h3><strong>Specification</strong></h3>
</td>
<td> </td>
</tr>
<tr>
<td></td>
<td></td>
</tr>
<tr>
<td><strong>VTX</strong></td>
<td></td>
</tr>
<tr>
<td>Model</td>
<td>Avatar HD Mini VTX V3</td>
</tr>
<tr>
<td>Communication Frequency</td>
<td>5.725-5.850GHz</td>
</tr>
<tr>
<td>Transmitter Power (EIRP)</td>
<td>FCC:&lt27dBmCE:&lt14dBmSRRC:&lt20dBm<br>MIC:&lt25dBm</td>
</tr>
<tr>
<td>I/O Interface</td>
<td>JST1.0*4(Power in)JST0.8*4(USB)</td>
</tr>
<tr>
<td>Mounting Holes</td>
<td>25.5*25.5mm(M2 hole)20*20mm(M3 hole)</td>
</tr>
<tr>
<td>Dimensions</td>
<td>31.5*31.5*9.4mm</td>
</tr>
<tr>
<td>Storage</td>
<td>32G</td>
</tr>
<tr>
<td>Recording</td>
<td>1080p/720p</td>
</tr>
<tr>
<td>Weight</td>
<td>13.4g<br>
</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-20-40℃</td>
</tr>
<tr>
<td>Channels</td>
<td>8</td>
</tr>
<tr>
<td>Wide Power Input</td>
<td>3.1V-13V</td>
</tr>
<tr>
<td>Supported FC System</td>
<td>Betaflight Inav Fettec Kiss ArduPliot</td>
</tr>
<tr>
<td>OSD</td>
<td>Canvas mode</td>
</tr>
<tr>
<td>Latency</td>
<td>Average latency 22ms</td>
</tr>
<tr>
<td>Antenna</td>
<td>1(IPEX)</td>
</tr>
<tr>
<td></td>
<td></td>
</tr>
<tr>
<td></td>
<td></td>
</tr>
</tbody>
</table>
</div>

Bullet Point for Walksnail Avatar HD Mini VTX V3 Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range. The Avatar vtx comes with 32g built-in storage, it can record 1080p HD and 

Walksnail Avatar HD Mini VTX V3 Module – CADDX FPV


Bullet Point for Walksnail Avatar HD Mini VTX V3



Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds

Walksnail Avatar HD Mini VTX V3 Module

The Walksnail Avatar HD Mini VTX V3 features 32GB of built-in storage.&nbsp

The Walksnail Avatar HD Mini VTX V3 features 32GB of built-in storage. 

Walksnail Avatar HD Mini VTX V3

Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range. Check out all our Digital FPV VTX's and the rest of our Walksnail Products!! Features: The Avatar vtx comes with 32g built-i

Walksnail Avatar HD Mini VTX V3 (VTX ONLY) for Walksnail Avatar/Fatshark Dominator HD FPV System

HDZero Race V3 1080P 20x20 25-200mw Digital HD Video Transmitter

The HDZero Race V3 1080P VTX is your ideal choice for durability and reliability. Additionally, the Race V3 features larger components for increased stability consideration and an extra glue coating for superior crash protection. Get the ultimate VTX for race-ready performance. This board is rated with a 1.6mm thick PCB and reverse polarity protection circuit, you'll experience safer time working on this board. No soldering is needed – just plug the wire harness into a compatible HD-ready FC. 
The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz.
Check out all our VTXs and our HDZero selection
Features

Easy installation without soldering, just plug the wire harness into a compatible HD-ready FC
High-quality video in multiple resolutions: 540p90, 720p60, and 1080p30
Improved durability and reduced weight with a width similar to many FCs
Additional glue coating for crash protection of smaller components
Secure attachment of antenna with a metal bar and screws
Switchable power options: 25mW and 200mW
Small and lightweight: 28x32x5mm, 5.5 grams
Large package size components for stability
Durable design with a 1.6mm thick PCB
Operates on a 5.8GHz frequency band
3rd generation digital video transmitter
Wide voltage range: 4V to 12V
Designed for FPV racing





Specifications

Resolution Default: 540p90/720p60/1080p30

Frequency: 5.725-5.850GHz

RF power: 25mw/200mw

RF Connector: Secured U.FL

Interface: 4 lane MIPI CSI YUV422

Video Connector: 20 Position 0.30mm Pitch

Size: 32mmx28mmx5mm

Weight: 5.5g

Harness length: 40mm

power input: 4V-12V

Mounting: 20mm x 20mm M4 with rubber grommets

Firmware



Firmware


Includes

1x HDZero Race V3 720P 20x20 25-200mw Digital HD VTX 


The HDZero Race V3 1080P VTX is your ideal choice for durability and reliability. Additionally, the Race V3 features larger components for increased stability consideration and an extra glue coating for superior crash protection. Get the ultimate VTX for race-ready performance. This board is rated with a 1.6mm thick PC

HDZero Race V3 1080P 20x20 25-200mw Digital HD VTX

Designed for FPV racing, the HDZero Race V3 VTX is the 3rd generation digital video transmitter from Divimath. With a voltage range starting at 4V, it can be powered by the 5V 1.5A regulator of most flight controllers or up to 12V for flight controllers that include an HD VTX plug. It is small (28x32x5mm) and light (5.

HDZero Race V3 HD Video Transmitter By Divimath

The HDZero Race V3 1080P VTX is your ideal choice for durability and reliability. Additionally, the Race V3 features larger components for increased stability consideration and an extra glue coating for superior crash protection. Get the ultimate VTX for race-ready performance. This board is rated with a 1.6mm thick PCB and reverse polarity protection circuit, you&#39ll experience safer time working on this board. No soldering is needed – just plug the wire harness into a compatible HD-ready FC. 
The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz.
Check out all our VTXs and our HDZero selection
Features

Easy installation without soldering, just plug the wire harness into a compatible HD-ready FC
High-quality video in multiple resolutions: 540p90, 720p60, and 1080p30
Improved durability and reduced weight with a width similar to many FCs
Additional glue coating for crash protection of smaller components
Secure attachment of antenna with a metal bar and screws
Switchable power options: 25mW and 200mW
Small and lightweight: 28x32x5mm, 5.5 grams
Large package size components for stability
Durable design with a 1.6mm thick PCB
Operates on a 5.8GHz frequency band
3rd generation digital video transmitter
Wide voltage range: 4V to 12V
Designed for FPV racing





Specifications

Resolution Default: 540p90/720p60/1080p30

Frequency: 5.725-5.850GHz

RF power: 25mw/200mw

RF Connector: Secured U.FL

Interface: 4 lane MIPI CSI YUV422

Video Connector: 20 Position 0.30mm Pitch

Size: 32mmx28mmx5mm

Weight: 5.5g

Harness length: 40mm

power input: 4V-12V

Mounting: 20mm x 20mm M4 with rubber grommets

Firmware



Firmware


Includes

1x HDZero Race V3 720P 20x20 25-200mw Digital HD VTX 


HDZero Race V3 1080P 20x20 25-200mw Digital HD VTX from WREKD Co.

Description Designed for FPV racing, the HDZero Race V3 VTX is our 3rd generation digital video transmitter. With a voltage range starting at 4V, it can be powered by the 5V 1.5A regulator of most FC’s or up to 12V for FC’s that include a HD VTX plug. It is small (28x32x5mm) and light (5.5 grams). With a width of only 28mm, the VTX is now a similar width to many FC's, which improves durability and reduces weight. The antenna is securely attached with a metal bar and screws. No soldering needed – just plug the wire harness into a compatible HD-ready FC. The HDZero Race V3 VTX is designed with durability in mind, rather than weight. It is made with a 1.6mm thick PCB, in comparison to the 1.0mm PCB used in the Whoop lite VTX. Moreover, it uses more large package size components for stability consideration. For the smaller components, an additional glue coating is applied to increase crash protection. The Race V3 VTX also has a reverse polarity protection circuit, which is not present in the Whoop lite VTX. The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz.  Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Race V3&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3143&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#009540p90/720p60/1080p30&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009Secured U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00932mm x 28mm x 5mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0095.5g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Harness length:  &#009&#009&#009&#009&#009&#009&#009&#009&#00940mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input：&#009&#009&#009&#009&#009&#009&#009&#009&#0094V-12V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#00920mm x 20mm M4 with rubber grommets&#009&#009&#009&#009&#009&#009 Includes VTX-R3 board with pre-soldered harness * 1Rubber Grommet (M4 to M3) * 4；u.FL Antenna Retention Screws * 4Metal bar * 1 

Description Designed for FPV racing, the HDZero Race V3 VTX is our 3rd generation digital video transmitter. With a voltage range starting at 4V, it can be powered by the 5V 1.5A regulator of most FC’s or up to 12V for FC’s that include a HD VTX plug. It is small (28x32x5mm) and light (5.5 grams). With a width of only 28mm, the VTX is now a similar width to many FC's, which improves durability and reduces weight. The antenna is securely attached with a metal bar and screws. No soldering needed – just plug the wire harness into a compatible HD-ready FC. The HDZero Race V3 VTX is designed with durability in mind, rather than weight. It is made with a 1.6mm thick PCB, in comparison to the 1.0mm PCB used in the Whoop lite VTX. Moreover, it uses more large package size components for stability consideration. For the smaller components, an additional glue coating is applied to increase crash protection. The Race V3 VTX also has a reverse polarity protection circuit, which is not present in the Whoop lite VTX. The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz.  Specifications  									Model:									HDZero Race V3													SKU：									HDZ3143													Frequency: 									5.725-5.850GHz													Resolution Default:									540p90/720p60/1080p30													RF power：									25mw/200mw													RF Connector:									Secured U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									32mm x 28mm x 5mm													Weight:									5.5g													Harness length:  									40mm													power input：									4V-12V													Mounting：									20mm x 20mm M4 with rubber grommets						 Includes VTX-R3 board with pre-soldered harness * 1;Rubber Grommet (M4 to M3) * 4；u.FL Antenna Retention Screws * 4Metal bar * 1 

HDZero Race V3 VTX | HDZERO

HDZero Race V3 VTX

Designed for FPV racing, the HDZero Race V3 VTX is a 3rd generation digital video transmitter.&nbsp

Designed for FPV racing, the HDZero Race V3 VTX is a 3rd generation digital video transmitter. 

HDZero Race V3 Digital HD Video Transmitter

Foxeer

Foxeer HDZero 200mW HD VTX - Race Edition

Description The HDZero Race V1 VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Race V1&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3120&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.8G&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009Secured U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00927mm x 45mm x 6mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0095.9g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#009410mA@12V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input：&#009&#009&#009&#009&#009&#009&#009&#009&#0097V-17V(2S-4S)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#00920mm x 20mm M4 with rubber grommets&#009&#009&#009&#009&#009&#009 Includes HDZero Race V1 VTX * 1Power/ Uart Cables with Connector * 1；Zip ties * 4；Rubber Grommet (M4 to M3) * 6；Rubber Pad * 6；u.FL Antenna Retention Screws * 4/Nut * 4/Plate * 1 Evan Turner 3 time MultiGP champ proves HDZero digital racing has arrived!

Description The HDZero Race V1 VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  									Model:									HDZero Race V1													SKU：									HDZ3120													Frequency: 									5.8G													Resolution Default:									1280*720@60fps													RF power：									25mw/200mw													RF Connector:									Secured U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									27mm x 45mm x 6mm													Weight:									5.9g													Power:  									410mA@12V													power input：									7V-17V(2S-4S)													Mounting：									20mm x 20mm M4 with rubber grommets						 Includes HDZero Race V1 VTX * 1;Power/ Uart Cables with Connector * 1；Zip ties * 4；Rubber Grommet (M4 to M3) * 6；Rubber Pad * 6；u.FL Antenna Retention Screws * 4/Nut * 4/Plate * 1 Evan Turner 3 time MultiGP champ proves HDZero digital racing has arrived!

HDZero Race V1 VTX | HDZERO

HDZero Race V1 VTX

Foxeer has teamed up with Divimath to make a HDZero VTX in a small and lightweight 20x20 board.

Foxeer HDZero 200mW HD VTX Race Edition

DJI O3 Air Unit Transmission Module

The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provid

                                     DJI O3 Air Unit - Go the Distance

State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it&#39s possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!

Enjoy flagship video streaming



Get powerful video transmission capabilities - The DJI O3 Air Unit supports DJI&#39s flagship O3+ technology. This allows you to control the drone while enjoying the shortest response time and clear, sharp live feed. The device also has built-in 2T2R Omni-directional antennas, which guarantee greater stability and smoother transmission. Set off on your next adventure in the skies and experience an unforgettable experience!
See Even More
Get an even clearer and smoother live view. The DJI O3 Air Unit can stream video at resolutions up to 1080p, offering frame rates up to 100FPS. H.265 codec. The result is fantastic image quality. With the DJI O3 Air Unit, you will discover a new dimension of sky travel and provide yourself with an unforgettable experience! Get even more realism on your next flight. Thanks to this, you will feel as if you are actually looking at the world from under the clouds!
Create even greater images
Be amazed by the improved performance of the DJI O3 Air Unit. The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent picture quality and incredible detail Thanks to the solutions used, you can easily record a stable 4K/60FPS movie, and the super-wide 155° field of view will allow you to fit much more in the frame! The module is also distinguished by its f/2.8 aperture and 12.7mm equivalent focal length. Check what else will surprise you!
Enter the world of colors
Vivid, natural colors? Find out how easy it is! Try the D-Cinelike mode and gain more freedom when color grading in post-production. However, the possibilities don&#39t end there! The DJI O3 Air Unit camera module is perfect for use with DJI Avata ND filters (ND8/16/32), which are made of the highest quality materials and allow flexible aperture control. They also allow hassle-free exposure selection. All this translates into natural, faithfully reproduced colors and an interesting contrast between light and shadow.
Customize it
The DJI O3 Air Unit features a lightweight, compact design and wide compatibility. This means that you will successfully use it in various configurations. In combination with the DJI Goggles 2 and the DJI FPV Remote Controller 2 apparatus will provide you with complete mobility and freedom! Moreover, the device supports Canvas mode. This allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set the PID parameters and configure the system to best suit your habits!
Say goodbye to limitations - compatibility with various DJI devices
Get more opportunities. The DJI O3 Air Unit is compatible with the DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long-range, high noise immunity, and low latency. It also works with DJI Goggles 2, which are distinguished by a lighter, smaller design and have built-in micro-OLED screens. The device also works in conjunction with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with Hall effect sticks, and allows you to use the M mode that allows you to perform even extremely complex maneuvers. 
Features:


DJI O3+ Flagship Transmission: Transform your video transmission experience. It supports a max video transmission quality of 1080p/100fps from up to 10 km.

Next-Level Imaging Performance: Equipped with a 1/1.7-inch sensor, the DJI O3 Air Unit can shoot 4K/60fps video with a 155° super-wide FOV, giving you richer image details. It also comes with 20GB of built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32).

Canvas Mode: Canvas Mode lets you customize the OSD information on the screens of DJI Goggles 2 or DJI FPV Goggles V2, and adjust PID parameters.

Compact and Richly Compatible: Packed with richer compatibility in a lightweight body. DJI Goggles 2 and DJI FPV Remote Controller 2 are also smaller in size.


Integrating DJI&#39s cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent ..

                                     DJI O3 Air Unit - Go the Distance State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low late

DJI O3 Air Unit Transmission Module (VTX Only) from WREKD Co.

DJI O3 Air Unit Transmission Module (VTX Only)

                                     DJI O3 Air Unit - Go the Distance

State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!

Enjoy flagship video streaming



Get powerful video transmission capabilities - The DJI O3 Air Unit supports DJI's flagship O3+ technology. This allows you to control the drone while enjoying the shortest response time and clear, sharp live feed. The device also has built-in 2T2R Omni-directional antennas, which guarantee greater stability and smoother transmission. Set off on your next adventure in the skies and experience an unforgettable experience!
See Even More
Get an even clearer and smoother live view. The DJI O3 Air Unit can stream video at resolutions up to 1080p, offering frame rates up to 100FPS. H.265 codec. The result is fantastic image quality. With the DJI O3 Air Unit, you will discover a new dimension of sky travel and provide yourself with an unforgettable experience! Get even more realism on your next flight. Thanks to this, you will feel as if you are actually looking at the world from under the clouds!
Create even greater images
Be amazed by the improved performance of the DJI O3 Air Unit. The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent picture quality and incredible detail Thanks to the solutions used, you can easily record a stable 4K/60FPS movie, and the super-wide 155° field of view will allow you to fit much more in the frame! The module is also distinguished by its f/2.8 aperture and 12.7mm equivalent focal length. Check what else will surprise you!
Enter the world of colors
Vivid, natural colors? Find out how easy it is! Try the D-Cinelike mode and gain more freedom when color grading in post-production. However, the possibilities don't end there! The DJI O3 Air Unit camera module is perfect for use with DJI Avata ND filters (ND8/16/32), which are made of the highest quality materials and allow flexible aperture control. They also allow hassle-free exposure selection. All this translates into natural, faithfully reproduced colors and an interesting contrast between light and shadow.
Customize it
The DJI O3 Air Unit features a lightweight, compact design and wide compatibility. This means that you will successfully use it in various configurations. In combination with the DJI Goggles 2 and the DJI FPV Remote Controller 2 apparatus will provide you with complete mobility and freedom! Moreover, the device supports Canvas mode. This allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set the PID parameters and configure the system to best suit your habits!
Say goodbye to limitations - compatibility with various DJI devices
Get more opportunities. The DJI O3 Air Unit is compatible with the DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long-range, high noise immunity, and low latency. It also works with DJI Goggles 2, which are distinguished by a lighter, smaller design and have built-in micro-OLED screens. The device also works in conjunction with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with Hall effect sticks, and allows you to use the M mode that allows you to perform even extremely complex maneuvers. 
Features:


DJI O3+ Flagship Transmission: Transform your video transmission experience. It supports a max video transmission quality of 1080p/100fps from up to 10 km.

Next-Level Imaging Performance: Equipped with a 1/1.7-inch sensor, the DJI O3 Air Unit can shoot 4K/60fps video with a 155° super-wide FOV, giving you richer image details. It also comes with 20GB of built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32).

Canvas Mode: Canvas Mode lets you customize the OSD information on the screens of DJI Goggles 2 or DJI FPV Goggles V2, and adjust PID parameters.

Compact and Richly Compatible: Packed with richer compatibility in a lightweight body. DJI Goggles 2 and DJI FPV Remote Controller 2 are also smaller in size.


Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent video transmission quality with high definition, low latency, and long distances. It comes with a 1/1.7-inch sensor, a 155° super-wide FOV, and rich compatibility, providing a powerful video transmission solution for your assembled aircraft.


 


 
Specifications:
Camera:


Matrix: 1/1.7" CMOS Effective Pixels: 48MP

Lens: Field of View (FOV): 155° Equivalent Focal Length: 12.7mm Focal Length: 2.34mm Aperture: f/2.8 Focus Mode: FF Focus Range: 0.6m to ∞.

ISO range: 100-6400 (Auto) 100-25600 (Manual)

Snapshot: Roll Shutter

Field of View (FOV): 155°
Video resolution: 

With DJI Goggles 2: 4K @ 50/60FPS 2.7K @ 50/60/100FPS 1080p @ 50/60/100FPS
With DJI FPV Goggles V2: 4K @ 50/60FPS 2.7K @ 50/60/100/120FPS @ 1080p 50/60/100/120FPS


Video Format: MP4

Electronic Image Stabilization (EIS): The product supports RockSteady technology.

Weight: 8.3g (including coaxial cable)

Air Unit Module:


Weight: 

Air Unit (without Camera Unit): Approx. 28g
Air Unit (including Camera Unit): Approx. 36.4g
Antenna: Approx. 3g

Dimensions (L x W x H):

Transmission module: 32.5 x 30.5 x 14.5mm (L x W x H)
Camera module: 21.2 x 20 x 19.5mm (L x W x H)
Coaxial cable: 115mm (length )
3-in-1 cable: 100mm (length)
Antenna: 85mm (length)


Communication frequency:

2.400-2.4835 GHz (RX only)
5.725-5.850 GHz (RX and TX) 


Transmission power (EIRP): FCC: &lt33dBm CE: &lt14dBm SRRC: &lt30dBm
Live view quality and end delay: 

With DJI FPV Goggles V2: 810p/120FPS video transmission quality: less than 28ms latency. 810p/60FPS video streaming quality: less than 40ms latency.
With DJI Goggles 2: 1080p/60FPS video streaming quality: less than 30ms latency. 1080p/60FPS video streaming quality: less than 40ms latency.


Video Transmission Range: 10km (FCC), 2km (CE), 6km (SRRC)

Flight controller software supported: Compatibility with flight controller software that supports Betaflight. Please see the product FAQ for more information.

Input Voltage: 7.4-26.4V

Working temperature: -10°C to 40°C (14°F to 104°F)

Channels: Auto mode support Manual mode support: 40 MHz: 1 channel 20MHz: 3 channels 10MHz: 3channels

Channel information: FCC / SRRC / CE: 40 MHz: Ch 1: 5794.5 MHz 20 MHz / 10 MHz: Ch 1: 5768.5 MHz Ch 2: 5804.5 MHz Ch 3: 5839.5 MHz

Supported SD cards: MicroSD (up to 256GB)
Recommended MicroSD cards: 

SanDisk Extreme U3 V30 A1 32GB microSDXC
SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
Kingston Canvas Go! Plus U3 V30 A2 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
Samsung PRO Plus U3 V30 A2 256GB microSDXC


DJI Goggles supported: DJI Goggles 2 and DJI FPV Goggles V2

Supported DJI remote controllers: DJI FPV Remote Controller 2

Tips

Using DJI Goggles 2 and tested in an outdoor open environment without interference.
The 155° FOV is only available when using the 4:3 aspect ratio, and when the video recording specification is at 2.7K@50/60fps or 1080p@50fps/60fps the aspect ratio is 16:9, and the video recording specification is at 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps.
4K/60fps videos do not support the aspect ratio of 4:3, and only support that of 16:9.

Includes: 

1x DJI O3 Air Unit Transmission Module




DJI 03 Air Unit For Sale

The DJI O3 Air Unit Transmission Module will take your FPV experience to a whole new level all in a lightweight and compact design!

DJI O3 Air Unit Transmission Module 

About this product






The DJI O3 Air Unit Transmission Module will take your FPV experience to a whole new level all in a lightweight and compact design! Supports Betaflight, auto mode, manual mode: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels, microSD








Note: The new DJI O3 Air Unit can draw close to 2A under certain settings. Please verify that your flight controller is capable of 9V / 2A. If not, please consider powering the Air Unit directly from battery +/- on the flight controller or by using a standalone voltage regulator that supplies the required 2A.









Features


 	Compatible with flight controller firmware that supports Betaflight.
 	Supports auto mode / Supports manual mode: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels
 	Supported SD Cards: microSD (up to 256 GB)
 	Lightweight and compact in size











Specifications


 	 Live View Quality and End-to-End Latency:

 	With DJI FPV Goggles V2:

 	810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
 	810p/60fps Video Transmission Quality: The latency is lower than 40 ms.


 	With DJI Goggles 2:

 	1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
 	1080p/60fps Video Transmission Quality: The latency is as low as 40 ms."




 	Supported Flight Controller Firmware: Compatible with flight controller firmware that supports Betaflight. For more information, check the product FAQ.
 	Channels:

 	Supports auto mode
 	Supports manual mode: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels


 	Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
 	Supported DJI Goggles: DJI Goggles 2 and DJI FPV Goggles V2
 	Supported DJI Remote Controller: DJI FPV Remote Controller 2
 	Recommended microSD Cards:SanDisk Extreme U3 V30 A1 32GB microSDXC

 	SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
 	Kingston Canvas Go!Plus U3 V30 A2 64GB microSDXC
 	Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
 	Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
 	Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
 	Samsung PRO Plus U3 V30 A2 256GB microSDXC"


 	Weight:

 	Air Unit (camera module excluded): Approx. 28 g
 	Air Unit (camera module included): Approx. 36.4 g
 	Antenna: Approx. 3 g


 	Operating Temperature: -10º to 40º C (14° to 104° F)
 	Dimensions:

 	Transmission Module: 32.5×30.5×14.5 mm
 	Camera Module: 21.2×20×19.5 mm
 	Coaxial Cable: 115 mm
 	3-in-1 Cable: 100 mm
 	Antenna: 85 mm


 	Supported SD Cards: microSD (up to 256 GB)
 	Communication Frequency:

 	2.400-2.4835 GHz (RX only)
 	5.725-5.850 GHz (RX and TX)


 	Channels Info:

 	FCC/SRRC/CE:
 	40 MHz:
 	Channel 1: 5794.5 MHz
 	20 MHz/10 MHz:
 	Channel 1: 5768.5 MHz
 	Channel 2: 5804.5 MHz
 	Channel 3: 5839.5 MHz


 	Transmission Power (EIRP):

 	FCC: &amplt 33 dBm
 	CE: &amplt 14 dBm
 	SRRC: &amplt 30 dBm


 	Input Voltage: 7.4-26.4 V
 	Cable: 3-in-1 100mm








IMPORTANT NOTES




 	The 2.4GHz and 5.8GHz frequency bands are supported for receiving, and only the 5.8GHz frequency band is supported for transmitting. Some countries or regions do not support the 5.8 GHz band. Please check local regulations before use and strictly follow them.
 	This device is compatible with DJI Goggles 2, DJI FPV Goggles V2, and DJI FPV Remote Controller 2.
 	Video transmission bitrate may vary depending on the operating environment.











Includes


 	1x DJI O3 Air Unit Transmission Module

DJI O3 Air Unit Transmission Module | Five33

ImmersionRC

ImmersionRC Ghost Ultimate Hybrid 2.4GHz Rx and 5.8GHz VTX

In the FPV wold, we are conditioned… conditioned to cringe when leaving LOS, conditioned to fear concrete structures… until now. The Ultimate Hybrid takes the innovative Ghost Hybrid concept to a new level, with the traditional long range/low latency Ghost uplink, and a high power Tramp video transmitter, packaged in a

ImmersionRC Ghost Ultimate Hybrid 5.8GHz vTx/2.4GHz Rx

The Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX &amp 2.4GHz takes the innovative Ghost Hybrid concept to a new level, with the traditional long-range/low latency Ghost uplink, and a high-power Tramp video transmitter, packaged in a beautiful anodized heatsink.

The Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz takes the innovative Ghost Hybrid concept to a new level, with the traditional long-range/low latency Ghost uplink, and a high-power Tramp video transmitter, packaged in a beautiful anodi

Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz Rx

Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX &amp 2.4GHz Rx

In the FPV wold, we are conditioned… conditioned to cringe when leaving LOS, conditioned to fear concrete structures… until now.
The Ultimate Hybrid takes the innovative Ghost Hybrid concept to a new level, with the traditional long range/low latency Ghost uplink, and a high power Tramp video transmitter, packaged in a beautiful anodized heatsink.
Designed by pilots, built by pilots, supported by pilots.
Check out all our IRC Ghost Products and the rest of our ImmersionRC Products!
FEATURES:

 	Standard mounting pattern for digital vTx’s (Caddx Vista™)
 	2s-6s HV operation, no need for a 5V supply
 	5.8GHz 10-1500mW Video Transmitter *
 	Onboard Ghost Uno Receiver
 	Only 10.3g with heatsink, 3.1g without
 	Long range AND low latency
 	500Hz updates *
 	2.4GHz LoRa and FLRC Control
 	All 37 Standard Channels
 	Thermally regulated, Factory calibrated

* 1kHz ready for when OpenTx can supply quality data at this rate
* Available vTx channels and power may vary from region to region to comply with local regulations

INTELLIGENT VTX CONTROL
Intelligent, and direct control of the video transmitter from the Ghost ecosystem. Use either the OLED menus on the Ghost Transmitter module, or the responsive OpenTx tools menu.
Tx remains silent on power-up, shuts down immediately in an (unlikely) failsafe.

MANUAL:

 	Ghost Users Manual v2.5 (Firmware v1.0.6.5) (23.0 MB)
 	Ghost Quick Start Guide (159.5 KB)
 	Ghost Users Manual v1.9 (Firmware v1.0.2.1) (18.5 MB)

PACKAGE INCLUDES:

 	1x qTee Antenna
 	1x U.FL to SMA
 	Wire Harness

ATTN.
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

ImmersionRC Ghost Ultimate Hybrid | Five33

ImmersionRC Ghost Ultimate Hybrid

Walksnail Avatar HD VTX Module

Spare replacement VTX module for Walksnail HD Micro and Nano VTX Combos.
Check out all our Walksnail HD products!

Includes

1x Walksnail Avatar HD VTX Module


Spare replacement VTX module for Walksnail HD Micro and Nano VTX Combos. Check out all our Walksnail HD products! Includes 1x Walksnail Avatar HD VTX Module

Walksnail Avatar HD VTX Module from WREKD Co.

<div style="text-align: center" data-mce-style="text-align: center"><strong>AVATAR HD VTX MODULE</strong></div>
<br>
<div style="text-align: start"><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/02_9f27ed61-e751-4fed-b62a-af2253e6d7a3.png?v=1668500216" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/02_9f27ed61-e751-4fed-b62a-af2253e6d7a3_480x480.png?v=1668500216"></div>
<div style="text-align: center">  </div>
<div style="text-align: center"><strong>Product features:</strong></div>
<div style="text-align: center">1080P resolution、22ms low latency、16g light weight、4km range、Built-in 8G storage、6V-25.2V<img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/1d08f2df3add402cc53bb65caedc2cd1.png?v=1668500910" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/1d08f2df3add402cc53bb65caedc2cd1_480x480.png?v=1668500910">
</div>
<div style="text-align: center">    </div>
<div style="text-align: center"><strong>1080P/60FPS,720P/120FPS</strong></div>
<div style="text-align: center">The Avatar HD system uses H.265 code,an industry-leading technology,</div>
<div style="text-align: center">to provide 1080p FPV image quality with ultra-low latency.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/04.png?v=1666251220" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/04_480x480.png?v=1666251220"></div>
<div data-mce-fragment="1" style="text-align: center">    </div>
<div data-mce-fragment="1" style="text-align: center">
<strong>Dual-antenna Design,4km Long Range</strong><br data-mce-fragment="1">Designed to carry dual antennas to achieve more stable and powerful signals.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/06.png?v=1666251261" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/06_480x480.png?v=1666251261"></div>
<div data-mce-fragment="1">  </div>
<div data-mce-fragment="1" style="text-align: center">
<strong>Single Board Design,16g Light Weight</strong><br data-mce-fragment="1">VTX weights only 16g,designed with single board and 25.5*25.5mm<br data-mce-fragment="1">mounting hole distance,making installation easier.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/611e6d941bce5d9371e56aab4b99572.jpg?v=1666251328" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/611e6d941bce5d9371e56aab4b99572_480x480.jpg?v=1666251328"></div>
<div data-mce-fragment="1" style="text-align: center">  </div>
<div data-mce-fragment="1" style="text-align: center">
<strong>22ms Low Latency</strong><br data-mce-fragment="1">Supports both high frame rate and standard frame rate,<br data-mce-fragment="1">in high frame rate,it has an average latency of 22ms.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/07312e29bdd4163e2c4046381246825_4026838a-e1f5-4bf0-9b13-782ef8e26699.jpg?v=1666251395" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/07312e29bdd4163e2c4046381246825_4026838a-e1f5-4bf0-9b13-782ef8e26699_480x480.jpg?v=1666251395"></div>
<div data-mce-fragment="1" style="text-align: center">  </div>
<div data-mce-fragment="1" style="text-align: center">
<strong>8G Built-in Storage</strong><br data-mce-fragment="1">The Avatar vtx comes with 8g built-in storage it can record 1080p or 720p<br data-mce-fragment="1">HD flight videos without interference.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/1s__07.png?v=1665734629" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/1s__07_480x480.png?v=1665734629"></div>
<div data-mce-fragment="1" style="text-align: center">  </div>
<div data-mce-fragment="1" style="text-align: center">HD 1080p OLED Dual Micro Displays</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/31caaf30c7619a3583145ea21aa382ff.png?v=1666250130" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/31caaf30c7619a3583145ea21aa382ff_480x480.png?v=1666250130"></div>
<div data-mce-fragment="1" style="text-align: center">   </div>
<div data-mce-fragment="1" style="text-align: center">
<strong>Canvas Mode</strong><br data-mce-fragment="1"><span data-mce-fragment="1">supports Betaflight, kiss, Inav, Ardu full OSD display and customization</span>,<br data-mce-fragment="1">you can easily adjust the parameters you want by remote control.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/1_5d3e5bd0-c3ca-45c6-993a-144efd09b74b.png?v=1666250338" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/1_5d3e5bd0-c3ca-45c6-993a-144efd09b74b_480x480.png?v=1666250338"></div>
<div data-mce-fragment="1" style="text-align: center">  </div>
<div data-mce-fragment="1" style="text-align: center">
<strong>Mini Size,46°FoV</strong><br data-mce-fragment="1">The Avatar goggle is designed as lightweight mini<br data-mce-fragment="1">size and 46field of view,allowing pilots to wear it more<br data-mce-fragment="1">comfortably while giving them a more immersive FPV<br data-mce-fragment="1">experience as well.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/3_42379b68-5048-41ec-95df-c3df91c22be2.png?v=1666250354" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/3_42379b68-5048-41ec-95df-c3df91c22be2_480x480.png?v=1666250354"></div>
<div data-mce-fragment="1" style="text-align: center"> </div>
<div data-mce-fragment="1" style="text-align: center">
<strong>Focus Adjustment</strong><br data-mce-fragment="1">The goggles have the feature of adjusting the focus without the need to install<br data-mce-fragment="1">corrective lenses.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/10.png?v=1666248064" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/10_480x480.png?v=1666248064"></div>
<div data-mce-fragment="1" style="text-align: center"></div>
<div data-mce-fragment="1" style="text-align: center"><strong>  </strong></div>
<div data-mce-fragment="1" style="text-align: center"><strong>HDMI Output</strong></div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/12_a39a0607-e313-4539-af60-65fe98ae68d9.png?v=1666248808" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/12_a39a0607-e313-4539-af60-65fe98ae68d9_480x480.png?v=1666248808"></div>
<div data-mce-fragment="1" style="text-align: center"> </div>
<div data-mce-fragment="1" style="text-align: center">
<strong>Ranging Mode</strong><br data-mce-fragment="1">Turn on the ranging mode to display the distance between the drone<br data-mce-fragment="1">and goggles in real time,in case the drone is lost due to long distance flight.</div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/14.png?v=1666249162" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/14_480x480.png?v=1666249162"></div>
<div data-mce-fragment="1" style="text-align: start"><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/9_12c58a41-fe21-4a93-ad78-1d52e1aa496f.jpg?v=1666252108" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/9_12c58a41-fe21-4a93-ad78-1d52e1aa496f_480x480.jpg?v=1666252108"></div>
<div data-mce-fragment="1" style="text-align: center">It is recommended to use a regulated power supply for power supply.If you use a 6S battery,<br data-mce-fragment="1">be sure to install a capacitor at the battery input It is recommended to use the specifications<br data-mce-fragment="1">above 50V/47uF,the voltage ripple is higher than 35V,and the risk of burning the device is high.</div>
<p> </p>
<table data-mce-fragment="1" width="100%">
<tbody data-mce-fragment="1">
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left"><strong data-mce-fragment="1">VTX</strong></td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left"> </td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Model</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">Avatar module</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Communication Frequency</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">5.725-5.850GHz</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Transmitter Power (EIRP)</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm<br data-mce-fragment="1">MIC:&lt25dBm</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">1/O Interface</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">JST1.0*6(Power in)JST1.0*4(USB)</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Mounting Holes</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">25.5*25.5mm</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Dimensions</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">33*33*9.5mm</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Storage</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">8G</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Recording</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">1080p/720p</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Weight</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">16g</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Operating Temperature</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">-20-40℃</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Channels</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">8</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Wide Power Input</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">6V-25.2V</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Supported FC System</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">Betaflight</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">OSD</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">Canvas mode</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Latency</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">Average delay 22ms</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Antenna</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">2(IPEX)</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left"><strong>Packing List</strong></td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left"></td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">Avatar HD Module</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">×1</td>
</tr>
<tr data-mce-fragment="1">
<td data-mce-fragment="1" style="width: 33.9725% text-align: left" data-mce-style="width: 33.9725% text-align: left">6 Pin Power Cable</td>
<td data-mce-fragment="1" style="width: 59.0275% text-align: left" data-mce-style="width: 59.0275% text-align: left">×1</td>
</tr>
</tbody>
</table>
<p style="text-align: left" data-mce-style="text-align: left"> </p>
<p style="text-align: center" data-mce-style="text-align: center"> </p>
<p style="text-align: center" data-mce-style="text-align: center"> </p>
<p style="text-align: center" data-mce-style="text-align: center"> </p>
<p style="text-align: center" data-mce-style="text-align: center"> </p>

AVATAR HD VTX MODULE    Product features: 1080P resolution、22ms low latency、16g light weight、4km range、Built-in 8G storage、6V-25.2V      1080P/60FPS,720P/120FPS The Avatar HD system uses H.265 code,an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency.      Dual-antenna Design,4km Lo

Walksnail Avatar HD VTX Module – CADDX FPV

AVATAR HD VTX MODULE


  
Product features:
1080P resolution、22ms low latency、16g light weight、4km range、Built-in 8G storage、6V-25.2V

    
1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code

The Walksnail Avatar VTX is a lightweight HD system that works with HD Goggles such as the Walksnail Avatar and Fat Shark HD Dominator.

HDZero Freestyle 1W Video Transmitter

The HDZero Freestyle VTX is a digital HD 720p 60fps 5.8GHz made for freestyle drones. The large heatsink surrounding the VTX helps maintain a stable temperature from the increased transmission power potential. Mounts on standard 30x30mm spaced holes. The VTX includes a BEC that converts 2S-6S to fixed 5.8V with a maximum 5A output current. The VTX also includes a U.FL RHCP antenna.
The power input range is now 2S –6S. Though the VTX integrates a surge protection circuit, a large capacitor (450+uF) parallel with battery leads is mandatory to smooth the power supply of the whole quad.
Check out the rest of our HDZero gear! 

Specifications

Input Voltage: 2-6S

Operating Frequency: 5.725-5.850GHz
Transmitter Power: 25mW, 200mW (Out of the box)
Antenna Interface: Secured U.FL
Video In Secured: MIPI
SmartAudio: Yes
MSP Canvas Mode: Yes
Operating Temperature: 32˚F-104 ˚F (0˚-40˚C)
Power Consumption: 6-15W
Mounting Pattern: 30x30mm M3 holes

Dimensions: 40x42x10mm
Weight: 28g

Important Notes:

The Freestyle VTX consumes up to 15W. If it is connected with FC that has built-in BEC output, make sure the BEC has enough current. For example, the BEC has 10V, it needs a minimum of 1.5A current output.
Removing the heat sink is not recommended because it is part of the design.

Includes

1x HDZero Freestyle VTX
1x U.FL Antenna
1x BEC


You're going to love the U.FL HDZero Freestyle 30x30 25-1000mW Digital HD VTX on your freestyle build. Lightweight and reliable, you don't want to miss this.

HDZero Freestyle 30x30 25-1000mW Digital HD VTX - U.FL

U.FL HDZero Freestyle 30x30 25-1000mW Digital HD VTX for Sale

The HDZero Freestyle VTX is a digital HD 720p 60fps 5.8GHz made for freestyle drones. The large heatsink surrounding the VTX helps maintain a stable temperature from the increased transmission power potential. Mounts on standard 30x30mm spaced holes.

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

HDZero Freestyle VTX - RMRC

HDZero Freestyle VTX

Description The HDZero Freestyle VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 1000mw on 5.8GHz. It works with the HDZero/Shark Byte goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. The VTX includes an U.FL RHCP antenna. The power input range is 2S –6S. Though the VTX integrates a surge protection circuit, a large capacitor (450+uF) parallel with battery leads is mandatory to smooth the power supply of the whole quad.  Specifications Manual download &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Freestyle&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3130&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw/500mw/1000mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009Secured U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009Secured MIPI&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009FC protocol&#009&#009&#009&#009&#009&#009&#009&#009&#009MSP Canvas Mode/SmartAudio&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00940mm x 42mm x 10mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#00928g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#0096-15W&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power input：&#009&#009&#009&#009&#009&#009&#009&#009&#0097V-26V(2S-6S)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#00930.5mm x 30.5mm M3 holes&#009&#009&#009&#009&#009&#009 Includes HDZero Freestyle VTX * 1HDZero RHCP Antenna * 1Power/ Uart Cables * 1；u.FL Antenna Retention Screws * 2/Plate * 1MIPI Retention Screws * 2/Plate * 1  Important Notes: &#009The Freestyle VTX consumes up to 15W. If it is connected with FC, make sure the FC has enough current. For example, the FC has 10V, it needs minimum 1.5A current output.&#009Removing the heat sink is not recommended because it is part of the design. HDZero Range Testing - Putting the HDZero Freestyle VTX to the test---------Wezley VartyHDZero is (almost) ready to replace analog FPV // 1W FREESTYLE VTX---------Joshua Bardwell

Description The HDZero Freestyle VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 1000mw on 5.8GHz. It works with the HDZero/Shark Byte goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. The VTX includes an U.FL RHCP antenna. The power input range is 2S –6S. Though the VTX integrates a surge protection circuit, a large capacitor (450+uF) parallel with battery leads is mandatory to smooth the power supply of the whole quad.  Specifications Manual download 									Model:									HDZero Freestyle													SKU：									HDZ3130													Frequency: 									5.725-5.850GHz													Resolution Default:									1280*720@60fps													RF power：									25mw/200mw/500mw/1000mw													RF Connector:									Secured U.FL													Video Connector:									Secured MIPI													FC protocol									MSP Canvas Mode/SmartAudio													Size: 									40mm x 42mm x 10mm													Weight:									28g													Power:  									6-15W													Power input：									7V-26V(2S-6S)													Mounting：									30.5mm x 30.5mm M3 holes						 Includes HDZero Freestyle VTX * 1;HDZero RHCP Antenna * 1;Power/ Uart Cables * 1；u.FL Antenna Retention Screws * 2/Plate * 1MIPI Retention Screws * 2/Plate * 1  Important Notes: 	The Freestyle VTX consumes up to 15W. If it is connected with FC, make sure the FC has enough current. For example, the FC has 10V, it needs minimum 1.5A current output.	Removing the heat sink is not recommended because it is part of the design. HDZero Range Testing - Putting the HDZero Freestyle VTX to the test---------Wezley VartyHDZero is (almost) ready to replace analog FPV // 1W FREESTYLE VTX---------Joshua Bardwell

HDZero Freestyle VTX | HDZERO

The HDZero Freestyle VTX is a digital HD 720p 60fps 5.8GHz made for freestyle drones. The large heatsink surrounding the VTX helps maintain a stable temperature from the increased transmission power. Mounts on standard 30x30mm spaced holes.&nbsp

The HDZero Freestyle VTX is a digital HD 720p 60fps 5.8GHz made for freestyle drones. The large heatsink surrounding the VTX helps maintain a stable temperature from the increased transmission power. Mounts on standard 30x30mm spaced holes.
 

HDZero Freestyle Digital HD Video Transmitter (1W Capable)

HDZero Whoop VTX 25-200mW Video Transmitter

Description The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Whoop&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3110&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.8G&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power:&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00932.5mm x 32.5mm x 7mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0095.4g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#009410mA@12V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input&#009&#009&#009&#009&#009&#009&#009&#009&#0097V-26V(2S-6S)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting:&#009&#009&#009&#009&#009&#009&#009&#009&#00925.5mm*25.5mm,M2 clearance hole&#009&#009&#009&#009&#009&#009 Includes HDZero Whoop VTX * 1Power/ Uart Cables * 4； 

Description The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  									Model:									HDZero Whoop													SKU:									HDZ3110													Frequency: 									5.8G													Resolution Default:									1280*720@60fps													RF power:									25mw/200mw													RF Connector:									U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									32.5mm x 32.5mm x 7mm													Weight:									5.4g													Power:  									410mA@12V													power input									7V-26V(2S-6S)													Mounting:									25.5mm*25.5mm,M2 clearance hole						 Includes HDZero Whoop VTX * 1;Power/ Uart Cables * 4； 

HDZero Whoop VTX | HDZERO

HDZero Whoop VTX

The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.

HDZero Whoop VTX - RMRC

The HDZero Whoop Video Transmitter is identical to the Fatshark Shark Byte TX5S.1 video transmitter. It is the smallest video transmitter in the HDZero/Shark Byte family designed specifically for the micro quad market. Fly where no HD system has flown before with a sub 20g system (including single PCB TX board and came

HDZero Whoop HD Video Transmitter By Divimath

The HD Zero Whoop VTX is exactly what it sounds like. A small, lightweight whoop profile VTX for Shark Byte systems! Capable of sending a 720p 60FPS video feed at up to 200mW output power, and weighing under 6 grams! Pairs perfectly with the HDZero Nano Camera!
Check out all our Shark Byte gear, and our HDZero selection!
Features

720p 60FPS
Switchable 25mW &amp 200mW Output
Compatible with all Shark Byte / Byte Frost Receivers
Lightweight!

Specifications

Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Dimensions: 32.5x32.5x6mm
Weight: 5.9g

Includes

1x HDZero Whoop VTX for Shark Byte


The U.FL HDZero Whoop VTX 25-200mW Digital HD VTX for Shark Byte is exactly what it sounds like - a compact video transmitter for whoop platforms. Order today!

HDZero Whoop VTX 25-200mW Digital HD VTX for SharkByte - U.FL

U.FL HDZero Whoop VTX 25-200mW Digital HD VTX for Shark Byte for Sale

The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the&nbspShark Byte RX5.1&nbspgoggle module and a remote controller to transmit video and wirelessly control the parameters for the transmitter and camera.

The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module and a remote controller to transmit video and wirelessly control the parameters 

HDZero Whoop HD FPV Divimath Video Transmitter 

HDZero Race V2 20x20 25-200mW Digital HD VTX

The HD Zero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. 
Pairs perfectly with the HDZero Nano Camera!
Check out the rest of our HDZero gear!
Features

720p 60FPS
Switchable 25mW &amp 200mW Output
Lightweight

Specifications

Input Voltage: 7-26V
Output Power: 25mW, 200mW
Operating Frequency: 5.8GHz
Antenna Interface: U.FL (IPEX 1)

MSP Canvas Mode: Yes
Operating Temperature: 32-104°F
Mounting Pattern: 20x20mm, M3
Dimensions: 34x34x6mm
Weight: 5.9g

Includes

1x HDZero Race V2 25-200mW Digital HD VTX - U.FL


Get clear 720p video from the U.FL HDZero Race V2 20x20 25-200mW Digital HD VTX on your Shark Byte RX5.1 goggle module! Experience this with easy setup today.

HDZero Race V2 20x20 25-200mW Digital HD VTX - U.FL

U.FL HDZero Race V2 20x20 25-200mW Digital HD VTX for Sale

The HD Zero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. 
Pairs perfectly with the HDZero Nano Camera!
Check out the rest of our HDZero gear!
Features

720p 60FPS
Switchable 25mW &ampamp 200mW Output
Lightweight

Specifications

Input Voltage: 7-26V
Output Power: 25mW, 200mW
Operating Frequency: 5.8GHz
Antenna Interface: U.FL (IPEX 1)

MSP Canvas Mode: Yes
Operating Temperature: 32-104°F
Mounting Pattern: 20x20mm, M3
Dimensions: 34x34x6mm
Weight: 5.9g

Includes

1x HDZero Race V2 25-200mW Digital HD VTX - U.FL


The HD Zero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.  Pairs perfectly with the HDZero Nano Camer

HDZero Race V2 20x20 25-200mW Digital HD VTX - U.FL from WREKD Co.

The HDZero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.

HDZero Race V2 VTX - RMRC

HDZero Race V2 VTX

The HDZero Race2 VTX is a digital HD 720p 60fps Shark Byte video transmitter with 25/200mW switchable power on 5.8GHz. Designed for FPV racing, this VTX has adjustable power, 6s input, and weighs only 6.2g.

HDZero Race V2 Shark Byte Digital HD Video Transmitter

Description The HDZero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Race V2&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3140&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.8G&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009Secured U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00934mm x 34mm x 6mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0095.9g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#009410mA@12V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input：&#009&#009&#009&#009&#009&#009&#009&#009&#0097V-17V(2S-4S)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#00920mm x 20mm M4 with rubber grommets&#009&#009&#009&#009&#009&#009 Includes HDZero Race V2 VTX * 1Power/ Uart Cables * 5；Zip ties * 4；Rubber Grommet (M4 to M3) * 6；Rubber Pad * 6；u.FL Antenna Retention Screws * 4/Nut * 4/Plate * 1 Evan Turner 3 time MultiGP champ proves HDZero digital racing has arrived!

Description The HDZero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  									Model:									HDZero Race V2													SKU：									HDZ3140													Frequency: 									5.8G													Resolution Default:									1280*720@60fps													RF power：									25mw/200mw													RF Connector:									Secured U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									34mm x 34mm x 6mm													Weight:									5.9g													Power:  									410mA@12V													power input：									7V-17V(2S-4S)													Mounting：									20mm x 20mm M4 with rubber grommets						 Includes HDZero Race V2 VTX * 1;Power/ Uart Cables * 5；Zip ties * 4；Rubber Grommet (M4 to M3) * 6；Rubber Pad * 6；u.FL Antenna Retention Screws * 4/Nut * 4/Plate * 1 Evan Turner 3 time MultiGP champ proves HDZero digital racing has arrived!

HDZero Race V2 VTX | HDZERO

ImmersionRC Tramp/Ghost Hybrid DUO V2 2.4GHz Rx & 25-600mW 5.8GHz VTX - U.FL

There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp, we set out to raise the bar on video transmitter technology. With Ghost, we set out to redefine the norms in receivers for R/C control. And now we have fused these two toge

Immersion RC Tramp/Ghost Hybrid V2 DUO 5.8GHz vTx/2.4GHz Rx

FPV drone flyers understand the need for complex builds, but fortunately, Tramp and Ghost have revolutionized boundaries of video transmitter and receiver technology respectively. Now, these pioneering components have been merged into the remarkable Ghost Hybrid - designed, constructed and supported by pilots, for pilots.

Features


Two full receiver channels (not just dual antenna)
Only 2.2g, perfect for the popular sub-250g class
Extreme Range AND Low Latency
500Hz R/C Link Updates (HW is 1kHz ready)
2.4GHz Lora OR FLRC control modes, for the best performance in any environment
Integrated 5.8GHz 25mW - 600mW Video Transmitter
Thermally Regulated, Factory Calibrated

Specifications


Input Voltage: 5V


VTX Output Power: 25-600mW


Antenna Connector: U.FL

Power/Video Connection: Solder Pads / Plug
Frequency Range : 2406 - 2479MHz
Modulation: Chirp Spread Spectrum + Adaptive FHSS
Binding: Bidirectional with confirmation and protocol negotiation
RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come
Downlink Tx Power: +13dBm
Sensitivity: -117dBm in Long Range mode
Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted
Firmware: Over-the-air (OTA) upgradable

Stack Size: 20x20mm, 25x25mm


Dimensions: 31.5x30mm


Weight: 2.2g


Includes

1x ImmersionRC Ghost Hybrid DUO V2 2.4GHz Receiver &ampamp 20-600mW 5.8GHz VTX



FPV drone flyers understand the need for complex builds, but fortunately, Tramp and Ghost have revolutionized boundaries of video transmitter and receiver technology respectively. Now, these pioneering components have been merged into the remarkable Ghost Hybrid - designed, constructed and supported by pilots, for pilo

Immersion RC Tramp/Ghost Hybrid V2 DUO 5.8GHz vTx/2.4GHz Rx from WREKD Co.

The new ImmersionRC Tramp/Ghost Hybrid DUO V2 is a high-end analog 5.8GHz 25mW - 600mW video transmitter and 2.4GHz diversity receiver!

ImmersionRC Tramp/Ghost Hybrid DUO V2 2.4GHz Rx & 25-600mW 5.8GHz VTX

ImmersionRC Tramp/Ghost Hybrid DUO V2 2.4GHz Rx &amp 25-600mW 5.8GHz VTX

SpeedyBee

SpeedyBee TX800 20x20 25-850mW 5.8GHz VTX - MMCX

The Speedybee TX800 is a small, yet powerful VTX. Capable of 800mW output all while fitting in a 20x20mm mounting pattern. The integrated heatsink keeps dangerous heat away from sensitive electronics.

Speedybee TX800 5.8GHz VTX

The SpeedyBee TX800 It is a great choice for the FPV freestyle or for those who need a accurate and reliable VTX to fly in demanding locations.
Check out our other MMCX VTXs, as well as the rest of our SpeedyBee products! 
Specifications


Input Voltage: 3.7-5V


RF Output Power: 25 / 200 / 400 / 800mW

Control Protocol: IRC Tramp Protocol

Output Voltage: 5V


Antenna Connector: MMCX


Power/Video Connection: 4 Pin JST / Solder Pads


Stack Size: 20x20mm m3


Weight: 5.6g





Includes

1x SpeedyBee TX800 20x20 25-800mW 5.8GHz VTX - MMCX
1x SMA to MMCX Pigtail
1x MMCX Dipole Antenna
1x Wiring Harness

Manual
Speedybeetx800

The SpeedyBee TX800 It is a great choice for the FPV freestyle or for those who need a accurate and reliable VTX to fly in demanding locations. Check out our other MMCX VTXs, as well as the rest of our SpeedyBee products!  Specifications Input Voltage: 3.7-5V RF Output Power: 25 / 200 / 400 / 800mW Control Protocol: IR

SpeedyBee TX800 20x20 25-800mW 5.8GHz VTX - MMCX from WREKD Co.

SpeedyBee TX800 20x20 25-800mW 5.8GHz VTX - MMCX

RUNCAM

RunCam

WREKD is a family-owned & operated, leading online FPV super-store based in the United States specializing in FPV racing / freestyle / tiny / micro whoop drones, parts, gear, and accessories. We offer fast, domestic, same-day shipping with the quickest delivery to anywhere in the U.S.A.

Speedy Bee TX800 5.8GHZ Video Transmitter - 20x20mm from WREKD Co.

Speedy Bee TX800 5.8GHZ Video Transmitter - 20x20mm

The SpeedyBee TX800 is a max 800mW output, high-efficiency video transmitter, perfect in a stack with 20x20mm M2 mounting holes.  This vtx has IRC Tramp support for easy setting changes, Pit Mode, and only measures 28x28mm in size.   Check out all our Analog Video Transmitters and the rest of our Speedybee products! In

SpeedyBee TX800 5.8GHZ Video Transmitter - 20x20mm

TBS Tracer Sixty9 5.8GHz VTX + RX Receiver AIO Board

Team BlackSheep

What could be better than the best Tracer receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all.

TBS Tracer Sixty9 5.8GHz VTX + RX AIO Board

What could be better than a Tracer receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all.

TBS TRACER SIXTY9 | Five33

TBS TRACER SIXTY9

What could be better than the best Tracer receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all.  Introducing the TBS Tracer Sixty9, a VTx and receiver AIO board sporting a race-friendly, long-range capable video transmitter combined with the same on the TBS Tracer s

TBS Tracer SIXTY9 - RX+VTX

Team Black Sheep

What could be better than the best Tracer receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all. Introducing the TBS Tracer Sixty9, a VTx and receiver AIO board sporting a race-friendly, long-range capable video transmitter combined with the same on the TBS Tracer side. Mounting holes are 20x20, but we do incldue adapters for your 30x30 stacks, and a plastic case for mounting the unit to your frame - without any stacking necessity.Outputs 2x CRSF + 2x PWM (or 6x PWM) directly to your FC. The main JST-SH connector connects to your flight controller and video camera (or also FC for those that like the FC-OSD). 