FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

ImmersionRC

ImmersionRC Ghost Ultimate Hybrid 2.4GHz Rx and 5.8GHz VTX

In the FPV wold, we are conditioned… conditioned to cringe when leaving LOS, conditioned to fear concrete structures… until now. The Ultimate Hybrid takes the innovative Ghost Hybrid concept to a new level, with the traditional long range/low latency Ghost uplink, and a high power Tramp video transmitter, packaged in a

ImmersionRC Ghost Ultimate Hybrid 5.8GHz vTx/2.4GHz Rx

The Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX &amp 2.4GHz takes the innovative Ghost Hybrid concept to a new level, with the traditional long-range/low latency Ghost uplink, and a high-power Tramp video transmitter, packaged in a beautiful anodized heatsink.

The Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz takes the innovative Ghost Hybrid concept to a new level, with the traditional long-range/low latency Ghost uplink, and a high-power Tramp video transmitter, packaged in a beautiful anodi

Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz Rx

Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX &amp 2.4GHz Rx

In the FPV wold, we are conditioned… conditioned to cringe when leaving LOS, conditioned to fear concrete structures… until now.
The Ultimate Hybrid takes the innovative Ghost Hybrid concept to a new level, with the traditional long range/low latency Ghost uplink, and a high power Tramp video transmitter, packaged in a beautiful anodized heatsink.
Designed by pilots, built by pilots, supported by pilots.
Check out all our IRC Ghost Products and the rest of our ImmersionRC Products!
FEATURES:

 	Standard mounting pattern for digital vTx’s (Caddx Vista™)
 	2s-6s HV operation, no need for a 5V supply
 	5.8GHz 10-1500mW Video Transmitter *
 	Onboard Ghost Uno Receiver
 	Only 10.3g with heatsink, 3.1g without
 	Long range AND low latency
 	500Hz updates *
 	2.4GHz LoRa and FLRC Control
 	All 37 Standard Channels
 	Thermally regulated, Factory calibrated

* 1kHz ready for when OpenTx can supply quality data at this rate
* Available vTx channels and power may vary from region to region to comply with local regulations

INTELLIGENT VTX CONTROL
Intelligent, and direct control of the video transmitter from the Ghost ecosystem. Use either the OLED menus on the Ghost Transmitter module, or the responsive OpenTx tools menu.
Tx remains silent on power-up, shuts down immediately in an (unlikely) failsafe.

MANUAL:

 	Ghost Users Manual v2.5 (Firmware v1.0.6.5) (23.0 MB)
 	Ghost Quick Start Guide (159.5 KB)
 	Ghost Users Manual v1.9 (Firmware v1.0.2.1) (18.5 MB)

PACKAGE INCLUDES:

 	1x qTee Antenna
 	1x U.FL to SMA
 	Wire Harness

ATTN.
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

ImmersionRC Ghost Ultimate Hybrid | Five33

ImmersionRC Ghost Ultimate Hybrid

VTX Frequency

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.

Video Transmitters

VTX Stack Mount

VTX Antenna Connector

Max Transmission Power

Digital / Analog VTX

FPV Camera Included

ImmersionRC Tramp/Ghost Hybrid DUO V2 2.4GHz Rx & 25-600mW 5.8GHz VTX - U.FL

There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp, we set out to raise the bar on video transmitter technology. With Ghost, we set out to redefine the norms in receivers for R/C control. And now we have fused these two toge

Immersion RC Tramp/Ghost Hybrid V2 DUO 5.8GHz vTx/2.4GHz Rx

FPV drone flyers understand the need for complex builds, but fortunately, Tramp and Ghost have revolutionized boundaries of video transmitter and receiver technology respectively. Now, these pioneering components have been merged into the remarkable Ghost Hybrid - designed, constructed and supported by pilots, for pilots.

Features


Two full receiver channels (not just dual antenna)
Only 2.2g, perfect for the popular sub-250g class
Extreme Range AND Low Latency
500Hz R/C Link Updates (HW is 1kHz ready)
2.4GHz Lora OR FLRC control modes, for the best performance in any environment
Integrated 5.8GHz 25mW - 600mW Video Transmitter
Thermally Regulated, Factory Calibrated

Specifications


Input Voltage: 5V


VTX Output Power: 25-600mW


Antenna Connector: U.FL

Power/Video Connection: Solder Pads / Plug
Frequency Range : 2406 - 2479MHz
Modulation: Chirp Spread Spectrum + Adaptive FHSS
Binding: Bidirectional with confirmation and protocol negotiation
RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come
Downlink Tx Power: +13dBm
Sensitivity: -117dBm in Long Range mode
Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted
Firmware: Over-the-air (OTA) upgradable

Stack Size: 20x20mm, 25x25mm


Dimensions: 31.5x30mm


Weight: 2.2g


Includes

1x ImmersionRC Ghost Hybrid DUO V2 2.4GHz Receiver &ampamp 20-600mW 5.8GHz VTX



FPV drone flyers understand the need for complex builds, but fortunately, Tramp and Ghost have revolutionized boundaries of video transmitter and receiver technology respectively. Now, these pioneering components have been merged into the remarkable Ghost Hybrid - designed, constructed and supported by pilots, for pilo

Immersion RC Tramp/Ghost Hybrid V2 DUO 5.8GHz vTx/2.4GHz Rx from WREKD Co.

The new ImmersionRC Tramp/Ghost Hybrid DUO V2 is a high-end analog 5.8GHz 25mW - 600mW video transmitter and 2.4GHz diversity receiver!

ImmersionRC Tramp/Ghost Hybrid DUO V2 2.4GHz Rx & 25-600mW 5.8GHz VTX

ImmersionRC Tramp/Ghost Hybrid DUO V2 2.4GHz Rx &amp 25-600mW 5.8GHz VTX

ImmersionRC Tramp/Ghost Hybrid UNO V2 2.4GHz Rx & 25-600mW 5.8GHz VTX - U.FL

Immersion RC Tramp/Ghost Hybrid V2 UNO 5.8GHz vTx/2.4GHz Rx


Experiencing FPV flight is unparalleled, yet constructing those extraordinary vehicles can be intricate. We sought to advance video transmitter technology with Tramp and re-invent receiver norms with Ghost. Today, we are proud to introduce Ghost Hybrid, an unprecedented melding of the two. Developed by pilots, engineered by pilots, and backed by pilots.
Features

Only 2.2g, perfect for the popular sub-250g class
Extreme Range AND Low Latency
500Hz R/C Link Updates (HW is 1kHz ready)
2.4GHz Lora OR FLRC control modes, for the best performance in any environment
Integrated 5.8GHz 25mW - 600mW Video Transmitter
Thermally Regulated, Factory Calibrated

Specifications


Input Voltage: 5V


VTX Output Power: 25-600mW


Antenna Connector: U.FL

Power/Video Connection: Solder Pads / Plug
Frequency Range : 2406 - 2479MHz
Modulation: Chirp Spread Spectrum + Adaptive FHSS
Binding: Bidirectional with confirmation and protocol negotiation
RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come
Downlink Tx Power: +13dBm
Sensitivity: -117dBm in Long Range mode
Serial Formats: SBus, SBus-Fast (200k), SRXL-2 (400k), GHST, SBus Inverted
Firmware: Over-the-air (OTA) upgradable

Stack Size: 20x20mm, 25x25mm


Dimensions: 31.5x30mm


Weight: 2.2g


Includes

1 x ImmersionRC Ghost Hybrid UNO V2 2.4GHz Receiver &ampamp 20-600mW 5.8GHz VTX


Experiencing FPV flight is unparalleled, yet constructing those extraordinary vehicles can be intricate. We sought to advance video transmitter technology with Tramp and re-invent receiver norms with Ghost. Today, we are proud to introduce Ghost Hybrid, an unprecedented melding of the two. Developed by pilots, engineer

Immersion RC Tramp/Ghost Hybrid V2 UNO 5.8GHz vTx/2.4GHz Rx from WREKD Co.

The new ImmersionRC Tramp/Ghost Hybrid UNO V2 is a high-end analog 5.8GHz 25mW - 600mW video transmitter and 2.4GHz diversity receiver!

ImmersionRC Tramp/Ghost Hybrid UNO V2 2.4GHz Rx & 25-600mW 5.8GHz VTX

ImmersionRC Tramp/Ghost Hybrid UNO V2 2.4GHz Rx &amp 25-600mW 5.8GHz VTX

SpeedyBee

SpeedyBee TX800 20x20 25-850mW 5.8GHz VTX - MMCX

The SpeedyBee TX800 is a max 800mW output, high-efficiency video transmitter, perfect in a stack with 20x20mm M2 mounting holes.  This vtx has IRC Tramp support for easy setting changes, Pit Mode, and only measures 28x28mm in size.   Check out all our Analog Video Transmitters and the rest of our Speedybee products! In

SpeedyBee TX800 5.8GHZ Video Transmitter - 20x20mm

The SpeedyBee TX800 It is a great choice for the FPV freestyle or for those who need a accurate and reliable VTX to fly in demanding locations.
Check out our other MMCX VTXs, as well as the rest of our SpeedyBee products! 
Specifications


Input Voltage: 3.7-5V


RF Output Power: 25 / 200 / 400 / 800mW

Control Protocol: IRC Tramp Protocol

Output Voltage: 5V


Antenna Connector: MMCX


Power/Video Connection: 4 Pin JST / Solder Pads


Stack Size: 20x20mm m3


Weight: 5.6g





Includes

1x SpeedyBee TX800 20x20 25-800mW 5.8GHz VTX - MMCX
1x SMA to MMCX Pigtail
1x MMCX Dipole Antenna
1x Wiring Harness

Manual
Speedybeetx800

The SpeedyBee TX800 It is a great choice for the FPV freestyle or for those who need a accurate and reliable VTX to fly in demanding locations. Check out our other MMCX VTXs, as well as the rest of our SpeedyBee products!  Specifications Input Voltage: 3.7-5V RF Output Power: 25 / 200 / 400 / 800mW Control Protocol: IR

SpeedyBee TX800 20x20 25-800mW 5.8GHz VTX - MMCX from WREKD Co.

SpeedyBee TX800 20x20 25-800mW 5.8GHz VTX - MMCX

RunCam

WREKD is a family-owned & operated, leading online FPV super-store based in the United States specializing in FPV racing / freestyle / tiny / micro whoop drones, parts, gear, and accessories. We offer fast, domestic, same-day shipping with the quickest delivery to anywhere in the U.S.A.

Speedy Bee TX800 5.8GHZ Video Transmitter - 20x20mm from WREKD Co.

Speedy Bee TX800 5.8GHZ Video Transmitter - 20x20mm

RUNCAM

The Speedybee TX800 is a small, yet powerful VTX. Capable of 800mW output all while fitting in a 20x20mm mounting pattern. The integrated heatsink keeps dangerous heat away from sensitive electronics.

Speedybee TX800 5.8GHz VTX

TBS Tracer Sixty9 5.8GHz VTX + RX Receiver AIO Board

What could be better than a Tracer receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all.

TBS TRACER SIXTY9 | Five33

TBS TRACER SIXTY9

What could be better than the best Tracer receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all.  Introducing the TBS Tracer Sixty9, a VTx and receiver AIO board sporting a race-friendly, long-range capable video transmitter combined with the same on the TBS Tracer s

TBS Tracer SIXTY9 - RX+VTX

Team Black Sheep

What could be better than the best Tracer receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all. Introducing the TBS Tracer Sixty9, a VTx and receiver AIO board sporting a race-friendly, long-range capable video transmitter combined with the same on the TBS Tracer side. Mounting holes are 20x20, but we do incldue adapters for your 30x30 stacks, and a plastic case for mounting the unit to your frame - without any stacking necessity.Outputs 2x CRSF + 2x PWM (or 6x PWM) directly to your FC. The main JST-SH connector connects to your flight controller and video camera (or also FC for those that like the FC-OSD). 

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

TBS Tracer Sixty9 - RMRC

TBS Tracer Sixty9

Team BlackSheep

What could be better than the best Tracer receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all.

TBS Tracer Sixty9 5.8GHz VTX + RX AIO Board

HGLRC

HGLRC Zeus Nano 16x16/20x20/25x25 25-350mW 5.8GHz VTX - U.FL

The HGLRC Zeus NANO Video Transmitter is ultralight and has multiple mounting patterns... including 16mm, 20mm, and 25.5mm. With a built-in microphone and slim boomerang shape, this VTX brings real-time audio transmission and a wider scope of application.

The HGLRC Zeus NANO Video Transmitter is ultralight and has multiple mounting patterns... including 16mm, 20mm, and 25.5mm. With a built-in microphone and slim boomerang shape, this VTX brings real-time audio transmission and a wider scope of applica

HGLRC Zeus Nano 350mW 16mm/20mm/25.5mm VTX

The HGLRC Zeus NANO Video Transmitter is ultralight and has multiple mounting patterns... including 16mm, 20mm, and 25.5mm. With a built-in microphone and slim boomerang shape, this VTX brings real-time audio transmission and a wider scope of application. Check out all our VTXs and the rest of our HGLRC Products! Speci

Smart mounting VTX, fits 16x16, 20x20, and whoop/toothpick mounting patterns.
Checkout our VTX section and our full collection of HGLRC products!
Features

5V input
16x16, 20x20, and whoop/toothpick mounting patterns
Up to 350mW output
Covers 40 Channels and 5 bands
Built in microphone

Specifications

Built-in Microphone
Input voltage:DC 5V

PIT@75mA
25mW@180mA/16dBm
100mW@280mA/21.5dBm
200mW@330mA/24.5dBm
350mW@400mA/27.5dBm

Antenna interface: U.FL
Output power: PIT/25/100/200/350mW
Standard 40 channels. A/B/E/F/R frequency group
Installing Hole:16X16/25.5X25.5mm.M2
20X20mm.M3
Size: 18.6mm x 13.6mm x 6mm
Weight: 2.4g


Smart mounting VTX, fits 16x16, 20x20, and whoop/toothpick mounting patterns. Checkout our VTX section and our full collection of HGLRC products! Features 5V input 16x16, 20x20, and whoop/toothpick mounting patterns Up to 350mW output Covers 40 Channels and 5 bands Built in microphone Specifications Built-in Microphone

HGLRC Zeus Nano 16x16/20x20/25x25 25-350mW 5.8GHz VTX - U.FL from WREKD Co.

BetaFPV

BetaFPV A02 25x25 25-800mW 5.8GHz VTX - MMCX

BETAFPV

The BETAFPV is an A02 5.8G VTX is a lightweight, small size, and high-quality 25-800mW VTX.

BETAFPV A02 25-800mW 5.8Ghz VTX

A02 5.8G VTX is a lightweight, small size and high-quality 25-800mW VTX, it offers a selectable 25/200/500/800mW output power for extreme range FPV flight. With 800mW output power, pilots can fly drones up to 1100 meters away to explore more possibilities and fun. Featuring a fixed mounting hole and 6-pin connector, which makes it’s super easy to install. It's a perfect choice for Whoop &amp Toothpick drones with 26*26mm mounting hole, like the X-Knight series, Beta85X/95X series and TWIG series drone, the A02 25-800mW 5.8G VTX is ready to push your FPV range to the horizons and beyond.

Bullet Point

A02 VTX is a high-quality 5.8GHz VTX with strong anti-interference ability and stable transmission. Comes with adjustable 25mW/200mW/500mW/800mW output power, allowing the perfect amount of output power to be selected based upon your FPV needs.
With the 800mW output power, pilots can fly drones up to 1100 meters away, which offers a perfect FPV solution for pilots in search of long-range flight.

At 5.26g of overall weight with a small-size layout, A02 VTX is perfectly suitable for Whoop and Toothpick Quad with a 26*26mm mounting hole, like X-Knight series, Beta85X/95X series and TWIG series drones without any reduction in performance or power.

Come with a built-in microphone, A02 VTX provides a real-time sound transmission, pilots can get a more vivid flight experience.
Featuring a fixed mounting hole and 6-pin connector, less solder work needed, which makes it’s super easy to install.



Specification

Item: A02 5.8G VTX

Output power: 25/200/500/800mW (adjustable)
Supply voltage range: 7-35V
Weight: 5.26g (excluding antenna)

VTX size: 27.3x27.3x4.5mm

Antenna: Air Antenna(MMCX Straight)
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz

Channel SEL: SmartAudio
Modulation type: FM
Channel Indicate: 3 LEDs
Frequency control: PLL
All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+60℃


A02 VTX is suitable for both Whoop and Toothpick Quad with a 26*26mm mounting hole. Pilots can assemble the A02 VTX on the X-Knight Carbon Fiber 5'' V2 Frame Kit and Beta95X Frame Kit.




Diagram for A02 VTX

Noticed: When you solder the VTX, pls follow the diagram for A02 VTX, in which the second port under ANT(MMCX) is GND, and it corresponds to the black wire of the 6-Pin FC Cable. If you have received the VTX with a diagram of "SW" or just black in the GND place, Please don't worry, it's just the typographical error, we have corrected it in the next batch.
How to Connect with FC
Here is the diagram about how to connect the VTX to Toothpick F722 2-6S AIO Brushless Flight Controller 35A(BLHei_32). The color of the lines in the diagram is the same as the 6-pin connector's wires' color.

How to Use the PitMode &amp Change the Frequency and Power

PitMode allows racers to power up their video transmitters during race events without interfering with other racers, and it still has the ability to change VTX settings or do some testing. The range is limited to 2-3m and transmission happens on the selected frequency.
The PitMode is active when the Red/Green/Blue Power LED flash.

How to active and exit the PitMode
Press the Button on the VTX twice to active Pitmode, double-press again to return to the previous power state. 
How to Change Frequency &amp Channel &amp Power
Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&gt VTX SA to change the frequency and power.

Switchable power includes 25mW, 200mW, 500mW and 800mW, and the PitMode is supported on this VTX.



RGB
Flash
Green
R+G(Yellow)
Red
B+R(Purple)


Power
Pit Mode
25mW
200mW
500mW
 800mW



Here are the 40CH frequency band and channel indicator status. Please follow the number of LED flashes to adjust your channel.

Package

1 * BETAFPV A02 5.8G VTX
1 * 6-Pin FC Cable

1 * Air Antenna(MMCX Straight)
3 * Anti-vibration rubber dampers



A02 5.8G VTX is a lightweight, small size and high-quality 25-800mW VTX, it offers a selectable 25/200/500/800mW output power for extreme range FPV flight. With 800mW output power, pilots can fly drones up to 1100 meters away to explore more possibilities and fun. Featuring a fixed mounting hole and 6-pin connector, wh

A02 25-800mW 5.8G VTX

BetaFPV M02 Toothpick 25-350mW 5.8GHz VTX w/ Antenna - U.FL

M02 VTX, a high-quality 5.8GHz VTX has 4 adjustable power including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun. Only weight 1.7g. M02 VTX especially comes with a separate 26.5 * 26.5mm mounting hole, which is more flexible for building more types of drones. It's perfectly suitable for the 3-5 inch drone such as TWIG ET5, X-Knight 4'' FPV, and HX115 HD toothpick quad.

Bullet Point

With the 350mW output power, M02 VTX provides a stable image and strong transmission. Pilots can fly drones up to 600 meters away.

M02 VTX comes with a separate 26.5*26.5mm mounting hole(needs to be soldered to the VTX), which is more flexible for building more types of drones. For the weight-sensitive drone, you can choose not to use this mounting hole while the single M02 VTX only weight 1.7g.
Comes with IPX type of antenna, just plug and play, no extra solder work needed. M02 VTX is more convenient for the install of FC with a 5-pin connector.
M02 VTX is perfectly suitable for the 3-5 inch drone, we highly recommend it for TWIG ET5, X-Knight 4'' FPV and HX115 HD toothpick quad. 



Specification

Item: M02 5.8G VTX

Output power: 25/100/200/350mW (adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.7g ( Mounting hole 0.7g)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz

Channel SEL: SmartAudio
Modulation type: FM
Channel Indicate: 3 LEDs
Frequency control: PLL
All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+60℃




Diagram for M02 VTX


How to Connect with FC
Here is the diagram about how to connect the VTX to Toothpick F4 2-4S AIO Brushless Flight Controller 20A(BLHei_S).

How to Use the PitMode &amp Change the Frequency and Power

PitMode allows racers to power up their video transmitters during race events without interfering with other racers, and it still has the ability to change VTX settings or do some testing. The range is limited to 2-3m and transmission happens on the selected frequency.
The PitMode is active when the Red/Green/Blue Power LED flash.

How to active and exit the PitMode
Press the Button on the VTX twice to active Pitmode, double-press again to return to the previous power state. 
How to Change Frequency &amp Channel &amp Power
Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&gt VTX SA to change the frequency and power.

Switchable power includes 25mW, 100mW, 200mW and 350mW, and the PitMode is supported on this VTX.

Here are the 40CH frequency band and channel indicator status. Please follow the number of LED flashes to adjust your channel.

Package

1 * BETAFPV M02 5.8G VTX
1 * 5-Pin FC Cable

1 * ZRC Antenna
3 * M1.4x8mm screws
3 * Anti-vibration rubber dampers



M02 VTX, a high-quality 5.8GHz VTX has 4 adjustable power including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun. Only weight 1.7g. M02 VTX especially comes with a separate 26.5 * 26.5mm mounting hole, which is more flexible for

M02 25-350mW 5.8G VTX

The M02 VTX by BETAFPV is a high-quality 5.8GHz VTX that comes with four adjustable power, including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun! 

BETAFPV M02 25-350mW 5.8GHz VTX

BetaFPV M01 V2.1 AIO 600TVL Camera w/ 5.8GHz VTX

M01 AIO Camera 5.8G VTX V2.1 is upgraded into a pin-connected version, easy to connect with the camera.  With the ultra-lightweight 2.72g. It comes with a super Mini 5.8GHz FPV Transmitter, 1200TVL FPV Camera (C02), and RG178 Antenna features 6 bands and 37 channels on the 5.8GHz band with Raceband which is perfect for Pro Series and Brushed Whoop Drone. 

Note: If you are looking for AIO VTX for the Pro2 Series whoop drone, Please click here to reach out.
Bullet Point


Upgraded into pin-connected version, easy to assemble
Lighter than Z02 AIO Camera VTX, perfect for Micro Drone 
Suitable for Pro Series and Brushed Whoop Drone

30° tilt Camera Mounting hardware is provided to suit your preference



Specification

Item: M01 Camera AIO VTX V2.1

Camera: C02 FPV Micro Camera
TVL: 1200TVL 
FOV: H:120°/V:100°

Video System: NTSC
Horizontal Resolution: 640X480 1/4”
Output power: 25mW
Supply Voltage: 5V
Size: 18*14*4.5mm(VTX)

Weight: 2.72g
Antenna: RG178 Antenna 

Frequency: 5.8GHz 6 bands 37 channels, with Raceband: 5362~5945MHz




Component Layout Diagram for M01 VTX V2.1
The following diagram describes the organization and wiring of the physical components on the M01 VTX V2.1 board.

How to Connect with FC
Here is the diagram about how to connect the VTX to  F4 AIO 1-2S FC.





Package

1 * BETAFPV M01 AIO FPV Camera VTX
1 * Micro Canopy 2022

4 * M1.4x4mm screws
1 * 1/4'' Camera Mounting hardware

Note: The canopy in the package is updated to the Micro Canopy 2022 version white color and a heatsink is added to the C02 camera.
_______________________________________________________________________________________
Check it here to know more about the V1.0version

Component Layout Diagram for M01 VTX V1.0

The following diagram describes the organization and wiring of the physical components on the M01 VTX board.


How to Connect with FC

M01 VTX comes with pluggable pins, which is convenient assembly with brushed FC like F4 1S Frsky brushed FC




M01 AIO Camera 5.8G VTX V2.1 is upgraded into a pin-connected version, easy to connect with the camera.  With the ultra-lightweight 2.72g. It comes with a super Mini 5.8GHz FPV Transmitter, 1200TVL FPV Camera (C02), and RG178 Antenna features 6 bands and 37 channels on the 5.8GHz band with Raceband which is perfect for

M01 AIO Camera 5.8G VTX V2.1(Pin-Connected)

The BETAFPV M01 AIO Camera 5.8GhZ VTX V2.1 comes with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna, features 6 bands and 37 channels on the 5.8GHz band with Raceband.

BETAFPV M01 AIO 600TVL Camera w/ 5.8GHz VTX V2.1

TBS Unify Pro32 HV 5.8GHz Video Transmitter - MMCX

With the TBS UNIFY PRO32 HV (MMCX) we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best HV VTx 

TBS Unify Pro32 HV (MMCX) VTx Video Transmitter

With the TBS UNIFY PRO32 HV we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. 

TBS Unify Pro32 HV 5.8GHz Video Transmitter (MMCX)

TBS Unify EVO 5.8GHz Video Transmitter

Introducing the latest technology in TBS video transmitters! It comes with a built-in graphical OSD and microphone, talks all the protocols and transmits all the power levels! This makes it a perfect companion for any situation where you don't have any OSD, or want to benefit from the simplicity and clarity that the TB

TBS Unify Evo VTX

The EVO comes with a built-in graphical OSD and microphone, talks all the protocols and transmits all the power levels! This makes it a perfect companion for any situation where you don't have any OSD, or want to benefit from the simplicity and clarity that the TBS OSD is known for.
Check out the rest of out TBS Products and all our VTXs!
Features
THE SWISS ARMY KNIFE OF VIDEO TRANSMITTERSWe packed all the features that we could into the smallest form factor possible. When we set out to make this video transmitter we were looking to make something that would fit all use cases for analog video transmitters ever envisioned. Long range, racing, freestyle, wings, cars. You name it, the VTx will shine in this application! More features are still under development and they can be loaded via the TBS AgentX with the onboard USB port.BARCODES? BARCODES!! (PATENT PENDING)The VTx is capable of processing the camera image. So we taught it to read barcodes! This means the VTx no longer needs to be transmitting to set channels, and setting channels can be done in the pits. It also means no more guesswork what channel the VTx is on, simply point it at the barcode of your choice and it will move to that channel or power level! There are many more exciting features coming with this technology, stay tuned and barcode on!CRSF, SMARTAUDIO 2.1, PWM, PITMODECRSF is the defacto standard in FPV and racing drones, so it makes sense that this video transmitter can both understand as well as speak CRSF. For compatibility, the VTx also speaks SA 2.1 and has the teamrace-friendly pitmode feature. PWM controls allow you to use the VTx with any radio and product. For example, you may have it on your R/C cars, R/C motorcycles or other devices that don't have flight controllers or Crossfire and control the VTx button with a switch or button you have on the radio.

Specifications

Operating Voltage: 6V - 26V (2S - 6S)
Supply current: (25mW) ~ 0.11A | (100mW) ~ 0.13A | (400mW) ~ 0.18A | (full power) ~ 0.24A
Operating Temperature: watch for normal airflow
Video Input Impedance: 75 Ohm
Weight: 7g
Dimensions: 30 x 23 x 5.5mm
Antenna Connector: u.FL socket
Video Format: NTSC/PAL
Audio: Microphone included
Output Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 29dBm (800mW)

Includes

1x TBS UNIFY EVO 5G8 Video transmitter
1x u.FL pigtail SMA
1x Power, Camera and CRSF cables

Wiring Diagram


The EVO comes with a built-in graphical OSD and microphone, talks all the protocols and transmits all the power levels! This makes it a perfect companion for any situation where you don't have any OSD, or want to benefit from the simplicity and clarity that the TBS OSD is known for. Check out the rest of out TBS Produc

TBS Unify EVO 25-800mW 5.8GHz VTX - SMA

TBS knows video transmitters, and their latest creation merges the best qualities of multiple VTX's into one. The Unify EVO aims to satisfy the video needs of every pilot!

TBS Unify Pro32 Nano 5G8 V1.1 500mW Video Transmitter

TBS Avionics Co. Ltd.

TBS UNIFY PRO32 NANO 5G8 V1.1
With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best nano VTx ever made.
 
MAIN FEATURES

Smallest, lightest video transmitter on the market
Barcodes reading
Up to 500mw+ of output power
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race. Now with team-race capability!
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without antenna for hours!
Clean powerup and video switching
CE certified

BARCODES? BARCODES!! (PATENT PENDING)
The VTx is capable of processing the camera image. So we taught it to read barcodes! This means the VTx no longer needs to be transmitting to set channels, and setting channels can be done in the pits. It also means no more guesswork what channel the VTx is on, simply point it at the barcode of your choice and it will move to that channel or power level! There are many more exciting features coming with this technology, stay tuned and barcode on!
PITMODE - MADE TO RACE
Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's) to allow you to power up your quad and still see the image! You've got less than one meter of range to put your quad through its paces before placing it on that starting grid. Using SmartAudio or CRSF, you can power up the VTx using your remote!
SMARTAUDIO V2.1 &amp CRSF - TEAM RACE READY
SmartAudio technology provides UART control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. Betaflight OSD, TBS CORE PRO).
With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!
CLEANSWITCH - NEIGHBOR FRIENDLY
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)
SPECIFICATIONS



Operating Voltage
3-13V


Operating Temperature
Watch for normal airflow


Video Input Impedance
75 Ohm


Weight
1g


Dimensions
15 x 13 x 2mm


Antenna Connector
u.FL socket


Video Format
NTSC/PAL


Output Power
14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 28dBm (500+mw)



INCLUDED

1x TBS UNIFY PRO32 5G8 Video transmitter
1x Silicone cable set (pre-tinned)
1x Linear whip antenna
1x Shrink Tube

DOWNLOADS

TBS UNIFY Pro32 Manual
TBS UNIFY Pro32 Manual (German)
Declaration of Conformity
OTA Firmware Update
VTX Table for Betaflight

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

TBS UNIFY PRO32 NANO 5G8 V1.1 With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality

TBS UNIFY PRO32 NANO 5G8 V1.1

With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best nano VTx ever made.
MAIN FEATURES

 	Smallest, lightest video transmitter on the market
 	Barcodes reading
 	Up to 500mw+ of output power
 	Ultra-clean transmission (up to 16 pilots at once!)
 	PitMode - power up your quad during a race. Now with team-race capability!
 	Easy OSD, FC and RC channel changes, with fallback button menu
 	Robust RF amplifier allows powering up without antenna for hours!
 	Clean powerup and video switching
 	CE certified

BARCODES? BARCODES!! (PATENT PENDING)
The VTx is capable of processing the camera image. So we taught it to read barcodes! This means the VTx no longer needs to be transmitting to set channels, and setting channels can be done in the pits. It also means no more guesswork what channel the VTx is on, simply point it at the barcode of your choice and it will move to that channel or power level! There are many more exciting features coming with this technology, stay tuned and barcode on!
PITMODE - MADE TO RACE
Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's) to allow you to power up your quad and still see the image! You've got less than one meter of range to put your quad through its paces before placing it on that starting grid. Using SmartAudio or CRSF, you can power up the VTx using your remote!
SMARTAUDIO V2.1 &ampamp CRSF - TEAM RACE READY
SmartAudio technology provides UART control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. Betaflight OSD, TBS CORE PRO).

With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!
CLEANSWITCH - NEIGHBOR FRIENDLY
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)
SPECIFICATIONS

 	Operating Voltage: 3-13V
 	Operating Temperature: watch for normal airflow
 	Video Input Impedance: 75 Ohm
 	Weight: 1g
 	Dimensions: 15 x 13 x 2mm
 	Antenna Connector: u.FL socket
 	Video Format: NTSC/PAL
 	Output Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 28dBm (500+mw)

INCLUDED

 	1x TBS UNIFY PRO32 5G8 Video transmitter
 	1x Silicone cable set (pre-tinned)
 	1x Linear whip antenna
 	1x Shrink Tube

DOWNLOADS

 	TBS UNIFY Pro32 Manual
 	TBS UNIFY Pro32 Manual (German)
 	Declaration of Conformity
 	OTA Firmware Update
 	VTX Table for Betaflight

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

TBS UNIFY PRO32 NANO 5G8 V1.1 | Five33

With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best nano VTx ever made. V1.1

With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most co

TBS Unify Pro Nano 5G8


TBS UNIFY PRO NANO 5G8


The world's smallest FPV video transmitter with 25mW / 50mW power levels, Smart Audio and u.FL
 
SIZE MATTERS!
As builds become smaller and the innovation surrounding brushed and brushless micro quads accelerates, the need for a high-quality VTx increases. TBS has built the smallest VTx possible, focusing purely on size! Sporting the usual Unify Pro pedigree, a newly-revised u.FL connector and the industry-standard Smart Audio support. You will be blown away with the performance in terms of range, signal clarity and signal spacing.

SPECIFICATIONS



Input Voltage
4.5V - 5V ONLY


Power levels
25mW / 50mW


Interface
SmartAudio and capacitive button (or solder external tactile button separately - included!)


Weight
1.4g (incl. antenna)


Size
13.2mm x 14.6mm


Antenna connector
u.FL (upgraded)


Antenna length
45.6mm (end to end)


TBS Tech

Smart Audio, Clean Switch




 
INCLUDES

1x Unify Pro nano 5G8 VTX
1x button switch
1x TBS UNIFY PRO 5G8 Linear Antenna
6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)

 
DOWNLOADS

VTX Table for Betaflight

MANUAL

TBS UNIFY Pro Manual



TBS UNIFY PRO NANO 5G8 The world's smallest FPV video transmitter with 25mW / 50mW power levels, Smart Audio and u.FL   SIZE MATTERS! As builds become smaller and the innovation surrounding brushed and brushless micro quads accelerates, the need for a high-quality VTx increases. TBS has built the smallest VTx possible,

The world's smallest FPV video transmitter with 25mW / 50mW power levels, Smart Audio and u.FL.

SIZE MATTERS! As builds become smaller and the innovation surrounding brushed and brushless micro quads accelerates, the need for a high-quality VTx increases. TBS has built the smallest VTx possible, focusing purely on size! Sporting the usual Unify Pro pedigree, a newly-revised u.FL connector and the industry-standar

TBS Unify Pro Nano 5G8 VTx Video Transmitter

The world's smallest FPV video transmitter with 25mW / 50mW power levels, Smart Audio and u.FL

TBS UNIFY PRO NANO 5G8 | Five33

TBS UNIFY PRO NANO 5G8

TBS Unify Pro 5G8 V3 - SMA






This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs off a filtered 5V power supply, so it's perfect when being connected to a TBS CORE PRO or TBS PowerCube (*)
New in V3:

Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax. on V3

Main features

Smallest, lightest video transmitter on the market
Up to 800mW of output power
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without antenna for hours!
Clean powerup and video switching
CE certified

PitMode - Made to race
Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. 
SmartAudio V2 - Full control
SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!
CleanSwitch - Neighbor friendly
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)
Say NO! to Dipswitches
Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 
Specifications

Operating Voltage: 4.5 - 5.5V
Supply current: 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 5g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)

Included

TBS UNIFY 5G8 Video transmitter
5V Video Transmitter pigtail cable
TBS UNIFY Pro Manual
CE Certification
Declaration of Conformity

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.






FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

TBS Unify Pro 5G8 V3 (SMA) This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other me

TBS Unify Pro 5G8 V3 (SMA)

TBS Unify Pro 5G8 V3 (SMA) DroneRacingParts.com

This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs off a filtered 5V power supply, so it's perfect when being connected to a TBS CORE PRO or TBS PowerCube.
New in V3: Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax.
Check out the rest of out TBS Products and all our VTXs!
Features

Smallest, lightest video transmitter on the market
Up to 800mW of output power
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without antenna for hours!
Clean powerup and video switching
CE certified

PitMode - Made to raceZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SmartAudio V2 - Full controlSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!CleanSwitch - Neighbor friendlyCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)Say NO! to DipswitchesEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies.
Specifications

Operating Voltage: 4.5 - 5.5V
Supply current: 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 5g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW)

Includes

1x TBS Unify Pro V3 25-800mW 5.8GHz VTX - SMA
1x 5V Video Transmitter pigtail cable


This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs 

TBS Unify Pro V3 25-800mW 5.8GHz VTX - SMA

A video transmitter just for racers. 5g weight, 25 - 800mW output power (user adjustable). Cutting weight and flying far has never been this easy and affordable.Antenna Connector: SMA Female Socket

TBS Unify Pro 5G8 HV - SMA

A Unify Pro 5G8 HV transmitter from Team Black Sheep.

TBS Unify Pro 5G8 HV (SMA)

TBS Unify Pro 5G8 HV - Race SMA

Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at a very attractive price! MAIN FEATURES Smallest, lightest video transmitter on the market 2-6S input power supported 25mW / 200mW power settings Ultra-clean transmission (up t

TBS Unify PRO 5G8 HV Race (SMA)

The smallest, lightest 40ch video transmitter on the market, down to a bare minimum for FPV racing, at a very attractive price!

TBS Unify Pro HV 5G8 - Race (SMA)

TBS Unify Pro 5G8 HV - RP-SMA

TBS Unify Pro 5G8 HV (RP-SMA)

TBS Unify Pro 5G8 V3 - RP-SMA

The smallest, lightest 40ch video transmitter on the market!

TBS Unify Pro 5G8 V3 (RP-SMA)

TBS Unify Pro HV 25-800mW 5.8GHz VTX - SMA

The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements while giving you the best possible picture. With only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices.
Check out the rest of out TBS Products and all our VTXs!
Features
Pitmode - Made to RaceZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SmartAudio - Full ControlSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels, and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external Bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in the air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!CleanSwitch - Neighbor FriendlyCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)Say no! to DipswitchesEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies.
Specifications

Operating Voltage: 2S - 6S
Supply current: up to 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 7g (with SMA, without antenna)
Input Connector: JST GH 7pin (after July 2018)
Antenna Connector: SMA Female Socket with screw mounting holes
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW)

Includes
1x TBS Unify Pro HV 25-800mW 5.8GHz VTX - SMA1x 7Pin Video Transmitter pigtail cable1x TBS UNIFY Pro Manual

The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand n

TBS Unify Pro HV Race 25-200mW 5.8GHz VTX - SMA

he newly refreshed Unify is here! The U.FL connector now has screws over a tiny plate to hold it in place. The connections have changed to add an additional ground and data pin to allow you to wire audio and SmartAudio separately.Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard") down to a bare minimum for FPV racing, at a very attractive price.
Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.
Features

Smallest, lightest video transmitter on the market
2-6S input power supported
25mW / 200mW power settings
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without an antenna for hours!
Clean powerup and video switching
CE certified
SmartAudio is now split into Audio = Audio and Data = SmartAudio

PITMODE - MADE TO RACEZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SMARTAUDIO V2 - FULL CONTROLSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels, and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external Bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in the air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility.CLEANSWITCH - NEIGHBOR FRIENDLYCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS.SAY NO! TO DIPSWITCHESEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 
Specifications

Operating Voltage: 2S - 6S
Supply current: 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 7g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes, U.FL to VTx
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW)

TBS UNIFY Pro Manual
Includes

1x TBS Unify Pro HV Race 25-200mW 5.8GHz VTX - SMA


he newly refreshed Unify is here! The U.FL connector now has screws over a tiny plate to hold it in place. The connections have changed to add an additional ground and data pin to allow you to wire audio and SmartAudio separately.Distilling the smallest, lightest and most powerful video transmitters (aka "the golden st

Antenna Connector

Antennas send signals to and from your VRX/VTX and RX/TX. Many video transmitters and radio receivers come with antennas. Ensure if you need them. Or choose upgrades to increase range and penetration. Select appropriate antennas based on connector, radio frequency, and polarization (if circularly polarized). 

Antennas

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 