FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

HDZero

HDZero Race V3 1080P 20x20 25-200mw Digital HD Video Transmitter

Designed for FPV racing, the HDZero Race V3 VTX is the 3rd generation digital video transmitter from Divimath. With a voltage range starting at 4V, it can be powered by the 5V 1.5A regulator of most flight controllers or up to 12V for flight controllers that include an HD VTX plug. It is small (28x32x5mm) and light (5.

HDZero Race V3 HD Video Transmitter By Divimath

Description Designed for FPV racing, the HDZero Race V3 VTX is our 3rd generation digital video transmitter. With a voltage range starting at 4V, it can be powered by the 5V 1.5A regulator of most FC’s or up to 12V for FC’s that include a HD VTX plug. It is small (28x32x5mm) and light (5.5 grams). With a width of only 28mm, the VTX is now a similar width to many FC's, which improves durability and reduces weight. The antenna is securely attached with a metal bar and screws. No soldering needed – just plug the wire harness into a compatible HD-ready FC. The HDZero Race V3 VTX is designed with durability in mind, rather than weight. It is made with a 1.6mm thick PCB, in comparison to the 1.0mm PCB used in the Whoop lite VTX. Moreover, it uses more large package size components for stability consideration. For the smaller components, an additional glue coating is applied to increase crash protection. The Race V3 VTX also has a reverse polarity protection circuit, which is not present in the Whoop lite VTX. The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz.  Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Race V3&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3143&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#009540p90/720p60/1080p30&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009Secured U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00932mm x 28mm x 5mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0095.5g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Harness length:  &#009&#009&#009&#009&#009&#009&#009&#009&#00940mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input：&#009&#009&#009&#009&#009&#009&#009&#009&#0094V-12V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#00920mm x 20mm M4 with rubber grommets&#009&#009&#009&#009&#009&#009 Includes VTX-R3 board with pre-soldered harness * 1Rubber Grommet (M4 to M3) * 4；u.FL Antenna Retention Screws * 4Metal bar * 1 

Description Designed for FPV racing, the HDZero Race V3 VTX is our 3rd generation digital video transmitter. With a voltage range starting at 4V, it can be powered by the 5V 1.5A regulator of most FC’s or up to 12V for FC’s that include a HD VTX plug. It is small (28x32x5mm) and light (5.5 grams). With a width of only 28mm, the VTX is now a similar width to many FC's, which improves durability and reduces weight. The antenna is securely attached with a metal bar and screws. No soldering needed – just plug the wire harness into a compatible HD-ready FC. The HDZero Race V3 VTX is designed with durability in mind, rather than weight. It is made with a 1.6mm thick PCB, in comparison to the 1.0mm PCB used in the Whoop lite VTX. Moreover, it uses more large package size components for stability consideration. For the smaller components, an additional glue coating is applied to increase crash protection. The Race V3 VTX also has a reverse polarity protection circuit, which is not present in the Whoop lite VTX. The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz.  Specifications  									Model:									HDZero Race V3													SKU：									HDZ3143													Frequency: 									5.725-5.850GHz													Resolution Default:									540p90/720p60/1080p30													RF power：									25mw/200mw													RF Connector:									Secured U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									32mm x 28mm x 5mm													Weight:									5.5g													Harness length:  									40mm													power input：									4V-12V													Mounting：									20mm x 20mm M4 with rubber grommets						 Includes VTX-R3 board with pre-soldered harness * 1;Rubber Grommet (M4 to M3) * 4；u.FL Antenna Retention Screws * 4Metal bar * 1 

HDZero Race V3 VTX | HDZERO

HDZero Race V3 VTX

Divimath

The HDZero Race V3 1080P VTX is your ideal choice for durability and reliability. Additionally, the Race V3 features larger components for increased stability consideration and an extra glue coating for superior crash protection. Get the ultimate VTX for race-ready performance. This board is rated with a 1.6mm thick PCB and reverse polarity protection circuit, you&#39ll experience safer time working on this board. No soldering is needed – just plug the wire harness into a compatible HD-ready FC. 
The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz.
Check out all our VTXs and our HDZero selection
Features

Easy installation without soldering, just plug the wire harness into a compatible HD-ready FC
High-quality video in multiple resolutions: 540p90, 720p60, and 1080p30
Improved durability and reduced weight with a width similar to many FCs
Additional glue coating for crash protection of smaller components
Secure attachment of antenna with a metal bar and screws
Switchable power options: 25mW and 200mW
Small and lightweight: 28x32x5mm, 5.5 grams
Large package size components for stability
Durable design with a 1.6mm thick PCB
Operates on a 5.8GHz frequency band
3rd generation digital video transmitter
Wide voltage range: 4V to 12V
Designed for FPV racing





Specifications

Resolution Default: 540p90/720p60/1080p30

Frequency: 5.725-5.850GHz

RF power: 25mw/200mw

RF Connector: Secured U.FL

Interface: 4 lane MIPI CSI YUV422

Video Connector: 20 Position 0.30mm Pitch

Size: 32mmx28mmx5mm

Weight: 5.5g

Harness length: 40mm

power input: 4V-12V

Mounting: 20mm x 20mm M4 with rubber grommets

Firmware



Firmware


Includes

1x HDZero Race V3 720P 20x20 25-200mw Digital HD VTX 


The HDZero Race V3 1080P VTX is your ideal choice for durability and reliability. Additionally, the Race V3 features larger components for increased stability consideration and an extra glue coating for superior crash protection. Get the ultimate VTX for race-ready performance. This board is rated with a 1.6mm thick PC

HDZero Race V3 1080P 20x20 25-200mw Digital HD VTX from WREKD Co.

HDZero Race V3 1080P 20x20 25-200mw Digital HD VTX

Designed for FPV racing, the HDZero Race V3 VTX is a 3rd generation digital video transmitter.&nbsp

Designed for FPV racing, the HDZero Race V3 VTX is a 3rd generation digital video transmitter. 

HDZero Race V3 Digital HD Video Transmitter

HDZERO

The HDZero Race V3 1080P VTX is your ideal choice for durability and reliability. Additionally, the Race V3 features larger components for increased stability consideration and an extra glue coating for superior crash protection. Get the ultimate VTX for race-ready performance. This board is rated with a 1.6mm thick PCB and reverse polarity protection circuit, you'll experience safer time working on this board. No soldering is needed – just plug the wire harness into a compatible HD-ready FC. 
The HDZero Race V3 VTX offers high-quality video in 540p90, 720p60 and 1080p30 resolutions with 25/200mW switchable power on 5.8GHz.
Check out all our VTXs and our HDZero selection
Features

Easy installation without soldering, just plug the wire harness into a compatible HD-ready FC
High-quality video in multiple resolutions: 540p90, 720p60, and 1080p30
Improved durability and reduced weight with a width similar to many FCs
Additional glue coating for crash protection of smaller components
Secure attachment of antenna with a metal bar and screws
Switchable power options: 25mW and 200mW
Small and lightweight: 28x32x5mm, 5.5 grams
Large package size components for stability
Durable design with a 1.6mm thick PCB
Operates on a 5.8GHz frequency band
3rd generation digital video transmitter
Wide voltage range: 4V to 12V
Designed for FPV racing





Specifications

Resolution Default: 540p90/720p60/1080p30

Frequency: 5.725-5.850GHz

RF power: 25mw/200mw

RF Connector: Secured U.FL

Interface: 4 lane MIPI CSI YUV422

Video Connector: 20 Position 0.30mm Pitch

Size: 32mmx28mmx5mm

Weight: 5.5g

Harness length: 40mm

power input: 4V-12V

Mounting: 20mm x 20mm M4 with rubber grommets

Firmware



Firmware


Includes

1x HDZero Race V3 720P 20x20 25-200mw Digital HD VTX 


VTX Frequency

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.

Video Transmitters

VTX Stack Mount

VTX Antenna Connector

Max Transmission Power

Digital / Analog VTX

FPV Camera Included

Foxeer

Foxeer HDZero 200mW HD VTX - Race Edition

Foxeer has teamed up with Divimath to make a HDZero VTX in a small and lightweight 20x20 board.

Foxeer HDZero 200mW HD VTX Race Edition

Description The HDZero Race V1 VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Race V1&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3120&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.8G&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009Secured U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00927mm x 45mm x 6mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0095.9g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#009410mA@12V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input：&#009&#009&#009&#009&#009&#009&#009&#009&#0097V-17V(2S-4S)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#00920mm x 20mm M4 with rubber grommets&#009&#009&#009&#009&#009&#009 Includes HDZero Race V1 VTX * 1Power/ Uart Cables with Connector * 1；Zip ties * 4；Rubber Grommet (M4 to M3) * 6；Rubber Pad * 6；u.FL Antenna Retention Screws * 4/Nut * 4/Plate * 1 Evan Turner 3 time MultiGP champ proves HDZero digital racing has arrived!

Description The HDZero Race V1 VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  									Model:									HDZero Race V1													SKU：									HDZ3120													Frequency: 									5.8G													Resolution Default:									1280*720@60fps													RF power：									25mw/200mw													RF Connector:									Secured U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									27mm x 45mm x 6mm													Weight:									5.9g													Power:  									410mA@12V													power input：									7V-17V(2S-4S)													Mounting：									20mm x 20mm M4 with rubber grommets						 Includes HDZero Race V1 VTX * 1;Power/ Uart Cables with Connector * 1；Zip ties * 4；Rubber Grommet (M4 to M3) * 6；Rubber Pad * 6；u.FL Antenna Retention Screws * 4/Nut * 4/Plate * 1 Evan Turner 3 time MultiGP champ proves HDZero digital racing has arrived!

HDZero Race V1 VTX | HDZERO

HDZero Race V1 VTX

HDZero Whoop Lite Video Transmitter 

About this product The HDZero Whoop Lite Bundle is exactly what you need to transform your 1S Whoop for the digital FPV world. The HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables

HDZero Whoop Lite Bundle

The HDZero Whoop Lite VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing

HDZero Whoop Lite VTX 

Description Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.  Whoop lite VTX Specification: &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009     HDZero Whoop lite Bundle&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009     HDZ3101&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#009     5.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution:&#009&#009&#009&#009&#009&#009&#009&#009&#009     1280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#009      25mW/200mW RF output&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009      U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009      MIPI&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009FC protocol&#009&#009&#009&#009&#009&#009&#009&#009&#009      Smart Audio Support/MSP&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#009      32.5x32.5mm (29x29mm inner)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#009      4.5grames/4mm Thickness (w/o shielding)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#009      7W&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power input：&#009&#009&#009&#009&#009&#009&#009&#009&#009      1S-3S&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#009      25.5x25.2 M2 soft mounting&#009&#009&#009&#009&#009&#009 Nano Lite Camera Specification: &#009&#009&#009&#009&#009&#009&#009&#009&#009Size:                          &#009&#009&#009&#009&#009&#009&#009&#009&#009    14x16x11mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:               &#009&#009&#009&#009&#009&#009&#009&#009&#009    1.5gram&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Sensor: &#009&#009&#009&#009&#009&#009&#009&#009&#009    0.5 inch, up to 10650 mV/Lux-sec&#009&#009&#009    Ultra-high sensitive CMOS sensor&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009FOV:&#009&#009&#009&#009&#009&#009&#009&#009&#009    - 4:3   D:130° H:108° V:84°&#009&#009&#009    - 16:9 D:122° H:108° V:65°&#009&#009&#009&#009&#009&#009Includes HDZero Whoop Lite VTX * 1HDZero Nano Lite Camera * 1Dipole Antenna * 1；40mm Mipi Cable * 1；Power/Uart Cable * 5；Zip ties * 2；Rubber Grommet (M3 to M2) * 4 Crazy Fast! Crazy Fun! Racing &ampamp Crashing with a New HDZero Lite 1S Whoop. - YouTubeNew HDZero Nano V2 Lite Camera // Whoop Lite vTx is Good Too - YouTube

Description Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.  Whoop lite VTX Specification: 									Model:									     HDZero Whoop lite Bundle													SKU：									     HDZ3101													Frequency: 									     5.725-5.850GHz													Resolution:									     1280*720@60fps													RF power：									      25mW/200mW RF output													RF Connector:									      U.FL													Video Connector:									      MIPI													FC protocol									      Smart Audio Support/MSP													Size: 									      32.5x32.5mm (29x29mm inner)													Weight:									      4.5grames/4mm Thickness (w/o shielding)													Power:  									      7W													Power input：									      1S-3S													Mounting：									      25.5x25.2 M2 soft mounting						 Nano Lite Camera Specification: 									Size:                          									    14x16x11mm													Weight:               									    1.5gram													Sensor: 									    0.5 inch, up to 10650 mV/Lux-sec			    Ultra-high sensitive CMOS sensor													FOV:									    - 4:3   D:130° H:108° V:84°			    - 16:9 D:122° H:108° V:65°						Includes HDZero Whoop Lite VTX * 1;HDZero Nano Lite Camera * 1;Dipole Antenna * 1；40mm Mipi Cable * 1；Power/Uart Cable * 5；Zip ties * 2；Rubber Grommet (M3 to M2) * 4; Crazy Fast! Crazy Fun! Racing &amp; Crashing with a New HDZero Lite 1S Whoop. - YouTubeNew HDZero Nano V2 Lite Camera // Whoop Lite vTx is Good Too - YouTube

HDZero Whoop Lite Bundle | HDZERO




Features


Ultra-high sensitive CMOS sensor
Excellent low light performance
Removable Shielding Box
Supports Smart Audio
Under 7g in Weight
4mm Thickness
1S-3S Input






Specifications


Mounting Pattern: 25.5x25.2 M2 (soft mounting)
Dimensions: 32.4x32.5mm (29x29mm inner)
Video Connector: 20 Position 0.30mm Pitch
Resolution Default: 1280*720@60fps
Interface: 4-lane MIPI CSI YUV422
RF Power: 25mw/200mw
Smart Audio: Supported
Power: 1000mA@5V
Power input: 1S-3S
RF Connector: U.FL
Frequency: 5.8G
Thickness: 4mm
SKU: HDZ3100
Weight: 4.5g






Includes


1x HDZero Whoop Lite VTX
4x Rubber Grommet (M3 to M2)
5x Power/Uart Cable
2x Zip ties





Features Ultra-high sensitive CMOS sensor Excellent low light performance Removable Shielding Box Supports Smart Audio Under 7g in Weight 4mm Thickness 1S-3S Input Specifications Mounting Pattern: 25.5x25.2 M2 (soft mounting) Dimensions: 32.4x32.5mm (29x29mm inner) Video Connector: 20 Position 0.30mm Pitch Resolution D

HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL from WREKD Co.

HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL

Description The HDZero Whoop Lite VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing.  It works with the Shark Byte RX5.1 goggle module to receive video. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Whoop Lite VTX&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3100&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.8G&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power:&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00932.4x32.5mm (29x29mm inner)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0094.5grames/4mm Thickness (w/o shielding)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#0091000mA@5V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input&#009&#009&#009&#009&#009&#009&#009&#009&#0091S-3S&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting:&#009&#009&#009&#009&#009&#009&#009&#009&#00925.5x25.2 M2 soft mounting&#009&#009&#009&#009&#009&#009 Includes HDZero Whoop Lite VTX * 1Power/Uart Cable * 5；Zip ties * 2；Rubber Grommet (M3 to M2) * 4  Crazy Fast! Crazy Fun! Racing &ampampamp Crashing with a New HDZero Lite 1S Whoop. - YouTube

Description The HDZero Whoop Lite VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing.  It works with the Shark Byte RX5.1 goggle module to receive video. Specifications  									Model:									HDZero Whoop Lite VTX													SKU:									HDZ3100													Frequency: 									5.8G													Resolution Default:									1280*720@60fps													RF power:									25mw/200mw													RF Connector:									U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									32.4x32.5mm (29x29mm inner)													Weight:									4.5grames/4mm Thickness (w/o shielding)													Power:  									1000mA@5V													power input									1S-3S													Mounting:									25.5x25.2 M2 soft mounting						 Includes HDZero Whoop Lite VTX * 1;Power/Uart Cable * 5；Zip ties * 2；Rubber Grommet (M3 to M2) * 4;  Crazy Fast! Crazy Fun! Racing &amp;amp; Crashing with a New HDZero Lite 1S Whoop. - YouTube

HDZero Whoop Lite VTX | HDZERO

HDZero Whoop Lite VTX

About this product TheHDZero Whoop Lite VTXis a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing. It works with the Shark Byte RX5.1 goggle module to receive video. VIDEO: HDZero Whoop Lite 1S VTX: EVERYTHING You Need To Know Features Ultra-high sensitive CM

HDZero Whoop Lite VTX W/ MIPI 80mm cable

Until now, 1S tiny whoops were the last type of FPV drone that couldn&#39t be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.
Check out all our Shark Byte gear, and our HDZero selection!

Features

Ultra-high sensitive CMOS sensor

Excellent low light performance

HDZero Nano Lite Camera

HDZero Whoop Lite VTX

Removal Shielding Box

Supports Smart Audio

Under 7g in Weight

Antenna Retention

4mm Thickness

1S-3S Input

Specifications
HDZERO WHOOP LITE VTX

Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package


HDZERO NANO LITE CAMERA

Size: 14x16x11mm

Weight: 1.5gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°


Includes

1x HDZero Whoop Lite VTX 

1x HDZero Nano Lite Camera 

1x Dipole Antenna

1x 40mm Mipi Cable 

1x Power/Uart Cable

2x Zip ties

4x Rubber Grommet 



Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Wh

HDZero Whoop Lite Bundle Kit from WREKD Co.

HDZero Whoop Lite Bundle Kit












HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL is here for your drone needs! Perfect for those feather-lite drones where saving every gram matters, this VTX is a digital HD 720p 60fps video transmitter with up to 200mw on 5.8GHz, perfect for racing.











Check out all our VTXs and our HDZero selection.


Specification

1-3S Input
25mW/200mW RF output
Smart Audio Support
25.5x25.2 M2 soft mounting
Antenna Retention
Removal Shielding Box
32.4x32.5mm (29x29mm inner)
4.5grames/4mm Thickness (w/o shielding)

Includes

1x HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL


HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL is here for your drone needs! Perfect for those feather-lite drones where saving every gram matters, this VTX is a digital HD 720p 60fps video transmitter with up to 200mw on 5.8GHz, perfect for racing. Check out all our VTXs and our HDZero selection. Specification 1-

Until now, 1S tiny whoops were the last type of FPV drone that couldn&#39t be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

HDZero Whoop Lite Bundle VTXCamera - RMRC

HDZero Whoop Lite Bundle VTX/Camera

HDZero Whoop Lite VTX | Five33

Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs and is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g 

HDZero Whoop Lite VTX By Divimath

Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. 
Check out all our Shark Byte gear, and our HDZero selection!

Features

Ultra-high sensitive CMOS sensor

Excellent low light performance

HDZero Nano V3 Camera

HDZero Whoop Lite VTX

Removal Shielding Box

Supports Smart Audio
Antenna Retention

4mm Thickness

1S-3S Input

Specifications
HDZERO WHOOP LITE VTX

Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 4.5g/4mm Thickness (w/o shielding)


HDZERO NANO V3 CAMERA

Size: 14x16x14mm

Weight: 2.2gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV: D:155° H:126° V:94°



Includes

1x HDZero Whoop Lite VTX 

1x HDZero Nano V3 Camera 

1x Dipole Antenna

1x 40mm Mipi Cable 

1x Power/Uart Cable

2x Zip ties

4x Rubber Grommet 



Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts.  Check out all our Shark Byte gear, and our HDZero s

HDZero Whoop VTX 25-200mW Video Transmitter

The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the&nbspShark Byte RX5.1&nbspgoggle module and a remote controller to transmit video and wirelessly control the parameters for the transmitter and camera.

The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module and a remote controller to transmit video and wirelessly control the parameters 

HDZero Whoop HD FPV Divimath Video Transmitter 

Description The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Whoop&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3110&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.8G&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power:&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00932.5mm x 32.5mm x 7mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0095.4g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#009410mA@12V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input&#009&#009&#009&#009&#009&#009&#009&#009&#0097V-26V(2S-6S)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting:&#009&#009&#009&#009&#009&#009&#009&#009&#00925.5mm*25.5mm,M2 clearance hole&#009&#009&#009&#009&#009&#009 Includes HDZero Whoop VTX * 1Power/ Uart Cables * 4； 

Description The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  									Model:									HDZero Whoop													SKU:									HDZ3110													Frequency: 									5.8G													Resolution Default:									1280*720@60fps													RF power:									25mw/200mw													RF Connector:									U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									32.5mm x 32.5mm x 7mm													Weight:									5.4g													Power:  									410mA@12V													power input									7V-26V(2S-6S)													Mounting:									25.5mm*25.5mm,M2 clearance hole						 Includes HDZero Whoop VTX * 1;Power/ Uart Cables * 4； 

HDZero Whoop VTX | HDZERO

HDZero Whoop VTX

The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.

HDZero Whoop VTX - RMRC

The HD Zero Whoop VTX is exactly what it sounds like. A small, lightweight whoop profile VTX for Shark Byte systems! Capable of sending a 720p 60FPS video feed at up to 200mW output power, and weighing under 6 grams! Pairs perfectly with the HDZero Nano Camera!
Check out all our Shark Byte gear, and our HDZero selection!
Features

720p 60FPS
Switchable 25mW &amp 200mW Output
Compatible with all Shark Byte / Byte Frost Receivers
Lightweight!

Specifications

Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Dimensions: 32.5x32.5x6mm
Weight: 5.9g

Includes

1x HDZero Whoop VTX for Shark Byte


The U.FL HDZero Whoop VTX 25-200mW Digital HD VTX for Shark Byte is exactly what it sounds like - a compact video transmitter for whoop platforms. Order today!

HDZero Whoop VTX 25-200mW Digital HD VTX for SharkByte - U.FL

U.FL HDZero Whoop VTX 25-200mW Digital HD VTX for Shark Byte for Sale

The HDZero Whoop Video Transmitter is identical to the Fatshark Shark Byte TX5S.1 video transmitter. It is the smallest video transmitter in the HDZero/Shark Byte family designed specifically for the micro quad market. Fly where no HD system has flown before with a sub 20g system (including single PCB TX board and came

HDZero Whoop HD Video Transmitter By Divimath

HDZero Race V2 20x20 25-200mW Digital HD VTX

The HD Zero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. 
Pairs perfectly with the HDZero Nano Camera!
Check out the rest of our HDZero gear!
Features

720p 60FPS
Switchable 25mW &ampamp 200mW Output
Lightweight

Specifications

Input Voltage: 7-26V
Output Power: 25mW, 200mW
Operating Frequency: 5.8GHz
Antenna Interface: U.FL (IPEX 1)

MSP Canvas Mode: Yes
Operating Temperature: 32-104°F
Mounting Pattern: 20x20mm, M3
Dimensions: 34x34x6mm
Weight: 5.9g

Includes

1x HDZero Race V2 25-200mW Digital HD VTX - U.FL


The HD Zero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.  Pairs perfectly with the HDZero Nano Camer

HDZero Race V2 20x20 25-200mW Digital HD VTX - U.FL from WREKD Co.

HDZero Race V2 20x20 25-200mW Digital HD VTX - U.FL

The HDZero Race2 VTX is a digital HD 720p 60fps Shark Byte video transmitter with 25/200mW switchable power on 5.8GHz. Designed for FPV racing, this VTX has adjustable power, 6s input, and weighs only 6.2g.

HDZero Race V2 Shark Byte Digital HD Video Transmitter

Description The HDZero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Race V2&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3140&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.8G&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009Secured U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00934mm x 34mm x 6mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0095.9g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#009410mA@12V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input：&#009&#009&#009&#009&#009&#009&#009&#009&#0097V-17V(2S-4S)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#00920mm x 20mm M4 with rubber grommets&#009&#009&#009&#009&#009&#009 Includes HDZero Race V2 VTX * 1Power/ Uart Cables * 5；Zip ties * 4；Rubber Grommet (M4 to M3) * 6；Rubber Pad * 6；u.FL Antenna Retention Screws * 4/Nut * 4/Plate * 1 Evan Turner 3 time MultiGP champ proves HDZero digital racing has arrived!

Description The HDZero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. Specifications  									Model:									HDZero Race V2													SKU：									HDZ3140													Frequency: 									5.8G													Resolution Default:									1280*720@60fps													RF power：									25mw/200mw													RF Connector:									Secured U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									34mm x 34mm x 6mm													Weight:									5.9g													Power:  									410mA@12V													power input：									7V-17V(2S-4S)													Mounting：									20mm x 20mm M4 with rubber grommets						 Includes HDZero Race V2 VTX * 1;Power/ Uart Cables * 5；Zip ties * 4；Rubber Grommet (M4 to M3) * 6；Rubber Pad * 6；u.FL Antenna Retention Screws * 4/Nut * 4/Plate * 1 Evan Turner 3 time MultiGP champ proves HDZero digital racing has arrived!

HDZero Race V2 VTX | HDZERO

HDZero Race V2 VTX

The HDZero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.

HDZero Race V2 VTX - RMRC

The HD Zero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. 
Pairs perfectly with the HDZero Nano Camera!
Check out the rest of our HDZero gear!
Features

720p 60FPS
Switchable 25mW &amp 200mW Output
Lightweight

Specifications

Input Voltage: 7-26V
Output Power: 25mW, 200mW
Operating Frequency: 5.8GHz
Antenna Interface: U.FL (IPEX 1)

MSP Canvas Mode: Yes
Operating Temperature: 32-104°F
Mounting Pattern: 20x20mm, M3
Dimensions: 34x34x6mm
Weight: 5.9g

Includes

1x HDZero Race V2 25-200mW Digital HD VTX - U.FL


Get clear 720p video from the U.FL HDZero Race V2 20x20 25-200mW Digital HD VTX on your Shark Byte RX5.1 goggle module! Experience this with easy setup today.

U.FL HDZero Race V2 20x20 25-200mW Digital HD VTX for Sale

HGLRC

HGLRC Zeus Nano 16x16/20x20/25x25 25-350mW 5.8GHz VTX - U.FL

Smart mounting VTX, fits 16x16, 20x20, and whoop/toothpick mounting patterns.
Checkout our VTX section and our full collection of HGLRC products!
Features

5V input
16x16, 20x20, and whoop/toothpick mounting patterns
Up to 350mW output
Covers 40 Channels and 5 bands
Built in microphone

Specifications

Built-in Microphone
Input voltage:DC 5V

PIT@75mA
25mW@180mA/16dBm
100mW@280mA/21.5dBm
200mW@330mA/24.5dBm
350mW@400mA/27.5dBm

Antenna interface: U.FL
Output power: PIT/25/100/200/350mW
Standard 40 channels. A/B/E/F/R frequency group
Installing Hole:16X16/25.5X25.5mm.M2
20X20mm.M3
Size: 18.6mm x 13.6mm x 6mm
Weight: 2.4g


Smart mounting VTX, fits 16x16, 20x20, and whoop/toothpick mounting patterns. Checkout our VTX section and our full collection of HGLRC products! Features 5V input 16x16, 20x20, and whoop/toothpick mounting patterns Up to 350mW output Covers 40 Channels and 5 bands Built in microphone Specifications Built-in Microphone

The HGLRC Zeus NANO Video Transmitter is ultralight and has multiple mounting patterns... including 16mm, 20mm, and 25.5mm. With a built-in microphone and slim boomerang shape, this VTX brings real-time audio transmission and a wider scope of application. Check out all our VTXs and the rest of our HGLRC Products! Speci

HGLRC Zeus Nano 350mW 16mm/20mm/25.5mm VTX

HGLRC Zeus Nano 16x16/20x20/25x25 25-350mW 5.8GHz VTX - U.FL from WREKD Co.

The HGLRC Zeus NANO Video Transmitter is ultralight and has multiple mounting patterns... including 16mm, 20mm, and 25.5mm. With a built-in microphone and slim boomerang shape, this VTX brings real-time audio transmission and a wider scope of application.

The HGLRC Zeus NANO Video Transmitter is ultralight and has multiple mounting patterns... including 16mm, 20mm, and 25.5mm. With a built-in microphone and slim boomerang shape, this VTX brings real-time audio transmission and a wider scope of applica

BetaFPV

BetaFPV M02 Toothpick 25-350mW 5.8GHz VTX w/ Antenna - U.FL

BETAFPV

M02 VTX, a high-quality 5.8GHz VTX has 4 adjustable power including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun. Only weight 1.7g. M02 VTX especially comes with a separate 26.5 * 26.5mm mounting hole, which is more flexible for building more types of drones. It's perfectly suitable for the 3-5 inch drone such as TWIG ET5, X-Knight 4'' FPV, and HX115 HD toothpick quad.

Bullet Point

With the 350mW output power, M02 VTX provides a stable image and strong transmission. Pilots can fly drones up to 600 meters away.

M02 VTX comes with a separate 26.5*26.5mm mounting hole(needs to be soldered to the VTX), which is more flexible for building more types of drones. For the weight-sensitive drone, you can choose not to use this mounting hole while the single M02 VTX only weight 1.7g.
Comes with IPX type of antenna, just plug and play, no extra solder work needed. M02 VTX is more convenient for the install of FC with a 5-pin connector.
M02 VTX is perfectly suitable for the 3-5 inch drone, we highly recommend it for TWIG ET5, X-Knight 4'' FPV and HX115 HD toothpick quad. 



Specification

Item: M02 5.8G VTX

Output power: 25/100/200/350mW (adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.7g ( Mounting hole 0.7g)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz

Channel SEL: SmartAudio
Modulation type: FM
Channel Indicate: 3 LEDs
Frequency control: PLL
All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+60℃




Diagram for M02 VTX


How to Connect with FC
Here is the diagram about how to connect the VTX to Toothpick F4 2-4S AIO Brushless Flight Controller 20A(BLHei_S).

How to Use the PitMode &amp Change the Frequency and Power

PitMode allows racers to power up their video transmitters during race events without interfering with other racers, and it still has the ability to change VTX settings or do some testing. The range is limited to 2-3m and transmission happens on the selected frequency.
The PitMode is active when the Red/Green/Blue Power LED flash.

How to active and exit the PitMode
Press the Button on the VTX twice to active Pitmode, double-press again to return to the previous power state. 
How to Change Frequency &amp Channel &amp Power
Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&gt VTX SA to change the frequency and power.

Switchable power includes 25mW, 100mW, 200mW and 350mW, and the PitMode is supported on this VTX.

Here are the 40CH frequency band and channel indicator status. Please follow the number of LED flashes to adjust your channel.

Package

1 * BETAFPV M02 5.8G VTX
1 * 5-Pin FC Cable

1 * ZRC Antenna
3 * M1.4x8mm screws
3 * Anti-vibration rubber dampers



M02 VTX, a high-quality 5.8GHz VTX has 4 adjustable power including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun. Only weight 1.7g. M02 VTX especially comes with a separate 26.5 * 26.5mm mounting hole, which is more flexible for

M02 25-350mW 5.8G VTX

The M02 VTX by BETAFPV is a high-quality 5.8GHz VTX that comes with four adjustable power, including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun! 

BETAFPV M02 25-350mW 5.8GHz VTX

BetaFPV M01 V2.1 AIO 600TVL Camera w/ 5.8GHz VTX

The BETAFPV M01 AIO Camera 5.8GhZ VTX V2.1 comes with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna, features 6 bands and 37 channels on the 5.8GHz band with Raceband.

BETAFPV M01 AIO 600TVL Camera w/ 5.8GHz VTX V2.1

M01 AIO Camera 5.8G VTX V2.1 is upgraded into a pin-connected version, easy to connect with the camera.  With the ultra-lightweight 2.72g. It comes with a super Mini 5.8GHz FPV Transmitter, 1200TVL FPV Camera (C02), and RG178 Antenna features 6 bands and 37 channels on the 5.8GHz band with Raceband which is perfect for Pro Series and Brushed Whoop Drone. 

Note: If you are looking for AIO VTX for the Pro2 Series whoop drone, Please click here to reach out.
Bullet Point


Upgraded into pin-connected version, easy to assemble
Lighter than Z02 AIO Camera VTX, perfect for Micro Drone 
Suitable for Pro Series and Brushed Whoop Drone

30° tilt Camera Mounting hardware is provided to suit your preference



Specification

Item: M01 Camera AIO VTX V2.1

Camera: C02 FPV Micro Camera
TVL: 1200TVL 
FOV: H:120°/V:100°

Video System: NTSC
Horizontal Resolution: 640X480 1/4”
Output power: 25mW
Supply Voltage: 5V
Size: 18*14*4.5mm(VTX)

Weight: 2.72g
Antenna: RG178 Antenna 

Frequency: 5.8GHz 6 bands 37 channels, with Raceband: 5362~5945MHz




Component Layout Diagram for M01 VTX V2.1
The following diagram describes the organization and wiring of the physical components on the M01 VTX V2.1 board.

How to Connect with FC
Here is the diagram about how to connect the VTX to  F4 AIO 1-2S FC.





Package

1 * BETAFPV M01 AIO FPV Camera VTX
1 * Micro Canopy 2022

4 * M1.4x4mm screws
1 * 1/4'' Camera Mounting hardware

Note: The canopy in the package is updated to the Micro Canopy 2022 version white color and a heatsink is added to the C02 camera.
_______________________________________________________________________________________
Check it here to know more about the V1.0version

Component Layout Diagram for M01 VTX V1.0

The following diagram describes the organization and wiring of the physical components on the M01 VTX board.


How to Connect with FC

M01 VTX comes with pluggable pins, which is convenient assembly with brushed FC like F4 1S Frsky brushed FC




M01 AIO Camera 5.8G VTX V2.1 is upgraded into a pin-connected version, easy to connect with the camera.  With the ultra-lightweight 2.72g. It comes with a super Mini 5.8GHz FPV Transmitter, 1200TVL FPV Camera (C02), and RG178 Antenna features 6 bands and 37 channels on the 5.8GHz band with Raceband which is perfect for

M01 AIO Camera 5.8G VTX V2.1(Pin-Connected)

TBS Unify Pro Nano 5G8

TBS Avionics Co. Ltd.


TBS UNIFY PRO NANO 5G8


The world's smallest FPV video transmitter with 25mW / 50mW power levels, Smart Audio and u.FL
 
SIZE MATTERS!
As builds become smaller and the innovation surrounding brushed and brushless micro quads accelerates, the need for a high-quality VTx increases. TBS has built the smallest VTx possible, focusing purely on size! Sporting the usual Unify Pro pedigree, a newly-revised u.FL connector and the industry-standard Smart Audio support. You will be blown away with the performance in terms of range, signal clarity and signal spacing.

SPECIFICATIONS



Input Voltage
4.5V - 5V ONLY


Power levels
25mW / 50mW


Interface
SmartAudio and capacitive button (or solder external tactile button separately - included!)


Weight
1.4g (incl. antenna)


Size
13.2mm x 14.6mm


Antenna connector
u.FL (upgraded)


Antenna length
45.6mm (end to end)


TBS Tech

Smart Audio, Clean Switch




 
INCLUDES

1x Unify Pro nano 5G8 VTX
1x button switch
1x TBS UNIFY PRO 5G8 Linear Antenna
6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)

 
DOWNLOADS

VTX Table for Betaflight

MANUAL

TBS UNIFY Pro Manual



TBS UNIFY PRO NANO 5G8 The world's smallest FPV video transmitter with 25mW / 50mW power levels, Smart Audio and u.FL   SIZE MATTERS! As builds become smaller and the innovation surrounding brushed and brushless micro quads accelerates, the need for a high-quality VTx increases. TBS has built the smallest VTx possible,

The world's smallest FPV video transmitter with 25mW / 50mW power levels, Smart Audio and u.FL

TBS UNIFY PRO NANO 5G8 | Five33

TBS UNIFY PRO NANO 5G8

SIZE MATTERS! As builds become smaller and the innovation surrounding brushed and brushless micro quads accelerates, the need for a high-quality VTx increases. TBS has built the smallest VTx possible, focusing purely on size! Sporting the usual Unify Pro pedigree, a newly-revised u.FL connector and the industry-standar

TBS Unify Pro Nano 5G8 VTx Video Transmitter

Team BlackSheep

The world's smallest FPV video transmitter with 25mW / 50mW power levels, Smart Audio and u.FL.

TBS Unify Pro 5G8 HV - Race SMA

The smallest, lightest 40ch video transmitter on the market, down to a bare minimum for FPV racing, at a very attractive price!

TBS Unify Pro HV 5G8 - Race (SMA)

Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at a very attractive price! MAIN FEATURES Smallest, lightest video transmitter on the market 2-6S input power supported 25mW / 200mW power settings Ultra-clean transmission (up t

TBS Unify PRO 5G8 HV Race (SMA)

TBS Unify Pro HV Race 25-200mW 5.8GHz VTX - SMA

he newly refreshed Unify is here! The U.FL connector now has screws over a tiny plate to hold it in place. The connections have changed to add an additional ground and data pin to allow you to wire audio and SmartAudio separately.Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard") down to a bare minimum for FPV racing, at a very attractive price.
Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.
Features

Smallest, lightest video transmitter on the market
2-6S input power supported
25mW / 200mW power settings
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without an antenna for hours!
Clean powerup and video switching
CE certified
SmartAudio is now split into Audio = Audio and Data = SmartAudio

PITMODE - MADE TO RACEZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SMARTAUDIO V2 - FULL CONTROLSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels, and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external Bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in the air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility.CLEANSWITCH - NEIGHBOR FRIENDLYCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS.SAY NO! TO DIPSWITCHESEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 
Specifications

Operating Voltage: 2S - 6S
Supply current: 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 7g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes, U.FL to VTx
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW)

TBS UNIFY Pro Manual
Includes

1x TBS Unify Pro HV Race 25-200mW 5.8GHz VTX - SMA


he newly refreshed Unify is here! The U.FL connector now has screws over a tiny plate to hold it in place. The connections have changed to add an additional ground and data pin to allow you to wire audio and SmartAudio separately.Distilling the smallest, lightest and most powerful video transmitters (aka "the golden st

Happymodel

Happymodel Diamond 25x25 25-200mW 5.8GHz VTX w/DVR for Mobula7 - U.FL

Specifications: Brand Name: Happymodel Output power: 25~200mw switchableFrequency: 37CHInput voltage: 3.3V 5.5VCurrent consumption: 250mA~510mA(type)Antenna: RG178 antenna U.FL interfaceFrequency: 5.8GHz 5bands 37 channelsWith RacebandSmartaudio readyWeight: 3g without antenna Video Output Size: VGA (640×480) Video Out

Happymodel Diamond VTX 5.8G 37ch 25mw-200mw Switchable VTX with DVR

HAPPYMODEL

Upgrade your whoop with a solid VTX with a DVR built in.
Pair this with one of our whoop flight controllers, and check out the rest of our Happymodel offerings.

Features


Built-in DVR(Video size 1280×720)
Upgrade for Moubla7 (Recommended parts to fit the Diamond VTX Happymodel Mobula7 V2 canopy CADDX EOS2 camera Runcam Nano2 camera)
Short touch the button to Start/Stop Video recorder
The video will split to 2 minutes automatically
Small size , lighter only 3gram and easy to mount in a regular whoop
Auto start when power on
Note: Auto-save when Power off is not support, please remember to press the stop button after landing

 



Specifications


Brand Name: Happymodel
Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 4.8v~5.5v
Current consumption: 250mA~510mA(type)
Antenna: RG178 antenna
U.FL interface
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready
Weight: 3g without antenna
Video Output Size: VGA (640×480)
Video Output format: NTSC
Record video size : 1280×720 @25FPS
TF Card support: Max.32G
Interface: JST SH1.0 3pin for Camera
JST SH1.0 5pin for Connect with F3/F4 Flight controller
Compress Format: AVI

 
Includes

1x  HappyModel Diamond Whoop 25-200mW 5.8GHz VTX w/ DVR for Mobula 7 - U.FL
1x JST SH1.0 3Pin wire for camera 
1x JST SH1.0 5Pin wire for flight controller 

Wiring
 manual download


Wiring




The world’s first AIO 5in1 F4 flight controller with integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrates SPI controlled 2.4GHz ExpressLRS receiver, Dshot protocol 4-in-1 ESC, 5.8GHz 40ch video transmitter and Betaflight OSD. Ultra-small size and ultra-stable remote control range can improve the range of the original SPI receiver. And because the 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate and low latency, this flight controller is the one that all Race/Freestyle pilots needed. It is suitable for use in Tiny whoop Race or Toothpick Freestyle, and can also be used in 1S ultra-lightweight Nano Long Range platform.

HappyModel Diamond Whoop 25-200mW 5.8GHz VTX w/ DVR for Mobula 7 - U.FL

HappyModel ELRS 2G4 Whoop Flight Controller - For Sale At RaceDayQuads

BetaFPV M03 25-350mW 5.8GHz VTX

M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying.
Check out all our Micro/Nano VTXs and all our BetaFPV gear!

Features

With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission.
Only 1.1g and a tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable for the BETAFPV C02 camera.
Comes with IPX type of antenna, just plug and play, no extra solder work needed. 
M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G).

Diagram
Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, and NewBeeDrone BeeEye.


How to connect with the Flight Controller
Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board.


Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board.


Change Band &amp Band &amp Chnanel &amp Power

M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&gt VTX SA to change the frequency point and power.

Switchable power includes 25mW, 100mW, 200mW and 350mW. Except for the method via OSD menu as show above, the output power could be changed via the power button.

Specifications

Item: M03 5.8G VTX

Output power: 25/100/200/350mW (adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.1g (antenna not included)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Channel SEL: SmartAudio
Modulation type: FM
Frequency control: PLL

All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+80℃
Camera connector: JST-0.8, compatible with cameras like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye.

Includes


1x BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL
5x 30AWG silicone wire (30mm)


M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying. Check out all our Micro/Nano VTXs and all our BetaFPV gear! Features With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission. Only 1.1g and a tiny size for dro

BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL

M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying.
Check out all our Micro/Nano VTXs and all our BetaFPV gear!

Features

With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission.
Only 1.1g and a tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable for the BETAFPV C02 camera.
Comes with IPX type of antenna, just plug and play, no extra solder work needed. 
M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G).

Diagram
Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, and NewBeeDrone BeeEye.


How to connect with the Flight Controller
Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board.


Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board.


Change Band &ampamp Band &ampamp Chnanel &ampamp Power

M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&ampgt VTX SA to change the frequency point and power.

Switchable power includes 25mW, 100mW, 200mW and 350mW. Except for the method via OSD menu as show above, the output power could be changed via the power button.

Specifications

Item: M03 5.8G VTX

Output power: 25/100/200/350mW (adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.1g (antenna not included)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Channel SEL: SmartAudio
Modulation type: FM
Frequency control: PLL

All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+80℃
Camera connector: JST-0.8, compatible with cameras like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye.

Includes


1x BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL
5x 30AWG silicone wire (30mm)


BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL from WREKD Co.

M03 VTX, a ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer range flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and fun. 

Note: The current version for M03 VTX is V1.1.
Bullet Point

With the 25-350mW output power, M03 VTX provides a stable image and strong transmission.
Only 1.1g and tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable with BETAFPV C02 and C03 camera.
Comes with IPX type of antenna, just plug and play, no extra solder work needed. 
M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend to use it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G).




Specification

Item: M03 5.8G VTX

Output power: PIT/25/100/200/400mW (V1.1, adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.1g (antenna not included)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Channel SEL: SmartAudio
Modulation type: FM
Frequency control: PLL

All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+80℃
Camera connector: JST-0.8, compatible with camera like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye.



Diagram
Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, C03 and NewBeeDrone BeeEye.


How to Connect with FC
Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board.


Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board.

Change Band &amp Channel &amp Power
M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&gt VTX SA to change the frequency point and power.

Switchable power includes 25mW, 100mW, 200mW and 350mW. Except the method via OSD menu as show above, the output power could be changed via the power button.

Below is the frequency table of M03 VTX V1.0 and V1.1.

FAQ


The newest version of M03 VTX is V1.1, which has a different VTX configuration. Pilots should flash the relevant VTX file for V1.0 and V1.1 versions. Click here to download the VTX table file for M03 VTX V1.0 and V1.1.


Package

1 * BETAFPV M03 5.8G VTX (antenna assembled)
5 * 30AWG silicone wire (30mm)



M03 VTX, a ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer range flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and fun.  Note: The current version for M03 VTX is V1.1. Bullet Po

M03 5.8G VTX

Foxeer HDZero 720P 20x20 25-200mw Digital HD Video Transmitter - Race Edition

FOXEER











This Foxeer HDZero HD 720P digital transmitter is perfect for FPV racing, with 200mw output power and 720p HD video streaming. Race with the top of the line for an immersive, crystal clear experience.










Check out all our VTXs and our entire Foxeer Collection!



Specifications

Frequency 5.8G

Resolution 1280x720@60fps

RF power 25mw/200mw

RF Connector Secured UFL

Interface 4 lane MIPI CSI YUV422

Video Connector 20 Position 0.30mm Pitch

Size 32mm x 34mm x 6mm

Weight 6.3g

Power 410mA@12V

Input Voltage 8~26V(3~6S)

Mounting 20mm x 20mm Φ4 M3

Includes

1x Foxeer HDZero 720P 20x20 25-200mw Digital HD VTX - Race Edition


This Foxeer HDZero HD 720P digital transmitter is perfect for FPV racing, with 200mw output power and 720p HD video streaming. Race with the top of the line for an immersive, crystal clear experience. Check out all our VTXs and our entire Foxeer Collection! Specifications Frequency 5.8G Resolution 1280x720@60fps RF pow

Foxeer HDZero 720P 20x20 25-200mw Digital HD VTX - Race Edition

The Foxeer HDZero HD 720P Digital VTx Race Edition is a digital HD 720p video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to receive video.   Check out our HDZero Compatible Gear, all HDZero Products and the rest of our Foxeer Collection.   Specifications: M

Foxeer HDZero HD 720P Digital VTx Race Edition


Introducing the Foxeer HDZero VTx Race, a high-performance video transmitter that takes your racing drone experience to new heights. With its cutting-edge specifications and sleek design, this VTx is a game-changer in the world of FPV racing.
Prepare to be amazed by the jaw-dropping clarity and immersive visuals provided by the HDZero VTx Race. Featuring a resolution of 1280x720 pixels at a buttery-smooth 60 frames per second, every twist, turn, and daring maneuver will be captured in stunning detail. Get ready to witness the thrill of your flights like never before.
Equipped with two RF power options, you have the flexibility to adapt to different racing environments. Select the 25mW mode for close-quarters racing, where precision and agility are paramount. When you need to push the limits and explore expansive race tracks, switch to the impressive 200mW power level and unleash the full potential of your drone.
The secure UFL connector ensures a rock-solid connection between the VTx and your antenna, minimizing signal loss and maximizing range. You can confidently soar through the air, knowing that your video transmission is always crisp and reliable.
With its 4 lane MIPI CSI YUV422 interface, the HDZero VTx Race effortlessly integrates into your racing drone setup. Seamlessly connect your favorite FPV goggles or receiver, and dive into the world of FPV racing with ease.
Designed with both performance and convenience in mind, this compact VTx measures a mere 32mm x 34mm x 6mm, making it lightweight and unobtrusive. Weighing in at just 6.3 grams, you won&#39t even notice its presence while blazing through the racecourse.
Power efficiency is a top priority, and the HDZero VTx Race delivers. Drawing only 410mA at 12V, this transmitter optimizes your power usage, ensuring longer flight times and less time spent on recharging.
No matter the battery configuration of your drone, the HDZero VTx Race is ready to adapt. Its wide input voltage range of 8V to 26V accommodates 3S to 6S LiPo batteries, providing you with the flexibility you need to keep pushing the limits.
Installing the HDZero VTx Race is a breeze, thanks to its 20mm x 20mm mounting pattern and Φ4 M3 screws. Included in the package are all the necessary accessories, including cables, gummy mounts, pads, zip ties, and a plate with nuts and screws. You&#39ll have everything you need to get up in the air in no time.
Unleash the full potential of your racing drone with the Foxeer HDZero VTx Race. Experience the thrill of FPV racing like never before, with immersive visuals, reliable performance, and effortless integration. Get ready to take your place on the podium with this exceptional video transmitter by your side.
Specifications

Model: Foxeer HDZero VTx Race
Frequency: 5.8G
Resolution: 1280*720 pixels at 60 frames per second (fps)
RF power: The VTx can operate at two power levels: 25mW and 200mW.
RF Connector: It uses a Secured UFL connector for the antenna.
Interface: The video transmitter supports a 4 lane MIPI CSI YUV422 interface.
Video Connector: It has a 20-position 0.30mm pitch connector for video connectivity.
Size: The dimensions of the VTx are 32mm x 34mm x 6mm.
Weight: It weighs 6.3 grams.
Power: The VTx requires 410mA of current at 12V.
Input Voltage: It can accept an input voltage range of 8V to 26V, suitable for 3S to 6S LiPo battery configurations.
Mounting: The VTx is designed to be mounted on a 20mm x 20mm mounting pattern using Φ4 M3 screws.
Included Accessories: The package includes 1 VTX unit, 6 cables, 4 gummy mounts, 4 pads, 1 set of zip ties, and 1 plate with 2 nuts and 2 screws for mounting.

Includes

1 x Foxeer HDZero VTx Race



Introducing the Foxeer HDZero VTx Race, a high-performance video transmitter that takes your racing drone experience to new heights. With its cutting-edge specifications and sleek design, this VTx is a game-changer in the world of FPV racing. Prepare to be amazed by the jaw-dropping clarity and immersive visuals provid

Foxeer HDZero HD 720P Digital VTx Race Edition from WREKD Co.

Foxeer Reaper Nano 25-350mW 5.8GHz VTX w/ IRC Tramp - U.FL

The Foxeer Reaper Nano VTX is made for speed and performance. With its lightweight design and adjustable 25-350mW power output, you can race with confidence. Get ready to take flight.
Check out all our Micro/Nano VTXs as well as the rest of our Foxeer Collection!

Features


&lt1g
12x16mm
350mW
Tramp


Specifications

Input Voltage: 5V DC
Output Voltage: 5V
Power: 25mW/100mW/200mW/350mW
Installation hole: No pins
Weight: &lt1g
Channels: 40CH
Consumption: 340mA @ 350mW

Includes

1x Foxeer Reaper Nano 25-350mW 5.8G Micro VTX - U.FL


The Foxeer Reaper Nano VTX is made for speed and performance. With its lightweight design and adjustable 25-350mW power output, you can race with confidence. Get ready to take flight. Check out all our Micro/Nano VTXs as well as the rest of our Foxeer Collection! Features &lt;1g 12x16mm 350mW Tramp Specifications Input

Foxeer Reaper Nano 25-350mW 5.8G Micro VTX - U.FL

This Foxeer Reaper Nano VTX was designed for serious racing where every gram and performance matters. Check out all our Analog Video Transmitters and the rest of our Foxeer Collection!   Specifications: Input Voltage: 5V DC Output Voltage: 5V Power: 25mW/100mW/200mW/350mW Installation hole: No pins Weight: &lt;1g Chann

Foxeer Reaper Nano 5.8G 350mW VTx


Me Caveman, me love FPV and Foxeer! Foxeer Reaper Nano VTX made for serious racing, perfect for me! Me love to race and need every advantage me can get. This little guy deliver the power and performance me need to win!
Don&#39t forget to check all our other awesome Analog Video Transmitters and the rest of our Foxeer products!
Specifications (me think important things!):

Input Voltage: 5V DC (need power!)
Output Voltage: 5V (me make sure me not go over this when soldering to pad)
Power: 25mW/100mW/200mW/350mW (more power = more range = more responsibility)
Installation hole: No pins (me think makes look slimmer)
Weight: &amplt1g (lighter than tiny rock)
Channels: 40CH (lots of channels for clear signal!)
Consumption: 340mA @ 350mW

Includes:

1x Foxeer Reaper Nano 5.8G 40CH 350mW VTx (me love this little guy!)
1x Power wire (need this to make it work!)



The Foxeer Reaper Nano is a lightweight 5.8G VTx with 40CH and 350mW power output, perfect for FPV enthusiasts.

Foxeer Reaper Nano 5.8G 40CH 350mW 1g Tramp VTx from WREKD Co.

Foxeer Reaper Nano 5.8G 40CH 350mW 1g Tramp VTx

Foxeer Reaper Nano Video Transmitter
At less than 1 gram in weight, the Reaper Nano is one of the smallest video transmitters around while still outputting 350mW of power!
Specifications

 	Weight: &amplt1 gram
 	Dimensions: 12x16mm
 	Power Levels: 25, 100, 200, 350 mW
 	Smart Audio Protocol: Tramp
 	Input Voltage: 5V
 	Power Consumption: 340mA at 350mW

Package Includes

 	1x Reaper Nano Video Transmitter

Downloads


 	Manual
 	Frequency Table

Foxeer Reaper Nano 5.8G 350mW Video Transmitter | Five33

Foxeer Reaper Nano 5.8G 350mW Video Transmitter

Foxeer Reaper Nano 5.8G 40CH 350mW 1g Tramp VTx



Name
Reaper Nano


Input Voltage
5V


Output Voltage
5V



Channels


40CH




Power


25mW/100mW/200mW/350mW




Weight

&lt1g



Size

12*16mm



Consumption

340mA @ 350mW






Band
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8




Band A
5865
5845
5825
5805
5785
5765
5745
5725


Band B
5733
5752
5771
5790
5809
5828
5847
5866


Band E
5705
5685
5665
5645
5885
5905
5925
5945


Band F
5740
5760
5780
5800
5820
5840
5860
5880


Band R
5658
5695
5732
5769
5806
5843
5880
5917



 
 

Foxeer Reaper Nano 5.8G 40CH 350mW 1g Tramp VTx Name Reaper Nano Input Voltage 5V Output Voltage 5V Channels 40CH Power 25mW/100mW/200mW/350mW Weight &lt;1g Size 12*16mm Consumption 340mA @ 350mW Band CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 Band A 5865 5845 5825 5805 5785 5765 5745 5725 Band B 5733 5752 5771 5790 5809 5828 584

AKK AIO-SA Whoop/Micro AIO FPV Camera w/ 25-200mW VTX

Featuring a whoop camera with Smart Audio! Take your Whoop tech to the next level.
Check out all our Camera/VTX AIOs &ampamp Combos

 Features

Super light weight: 4.3g, all in one vtx + camera + antenna
One button frequency and power setup
Support 0.01mW parameter-adjusting mode
0.01/25mW/50mW/100mW/200mW power switchable
OSD configuration using FC Uart (F3/F4/F7 with OSD)

Notice: 5645,5925,5945(E4,E7,E8) channels are not available due to FCC regulation. 

Specifications

Input voltage: 3.2-5.5V
Weight: 4.3g(exclude antenna)
Frequency: 5.8GHz 5 bands 40 channels

Includes

1x AKK AIO-SA Whoop/Micro AIO FPV Camera &ampamp 25-200mW VTX w/ Smart Audio




Featuring a whoop camera with Smart Audio! Take your Whoop tech to the next level. Check out all our Camera/VTX AIOs &amp; Combos  Features Super light weight: 4.3g, all in one vtx + camera + antenna One button frequency and power setup Support 0.01mW parameter-adjusting mode 0.01/25mW/50mW/100mW/200mW power switchable

AKK AIO-SA Whoop/Micro AIO FPV Camera & 25-200mW VTX w/ Smart Audio from WREKD Co.

AKK AIO-SA Whoop/Micro AIO FPV Camera & 25-200mW VTX w/ Smart Audio

Featuring a whoop camera with Smart Audio! Take your Whoop tech to the next level.
Check out all our Camera/VTX AIOs &amp Combos

 Features

Super light weight: 4.3g, all in one vtx + camera + antenna
One button frequency and power setup
Support 0.01mW parameter-adjusting mode
0.01/25mW/50mW/100mW/200mW power switchable
OSD configuration using FC Uart (F3/F4/F7 with OSD)

Notice: 5645,5925,5945(E4,E7,E8) channels are not available due to FCC regulation. 

Specifications

Input voltage: 3.2-5.5V
Weight: 4.3g(exclude antenna)
Frequency: 5.8GHz 5 bands 40 channels

Includes

1x AKK AIO-SA Whoop/Micro AIO FPV Camera &amp 25-200mW VTX w/ Smart Audio




Featuring a whoop camera with Smart Audio! Take your Whoop tech to the next level.Super light weight: 4.3g, all in one vtx + camera + antennaOne button...