FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Caddx

Caddx Polar HD Vista Kit for DJI

Caddx Polar Micro Digital FPV Air Unit Camera Kit is an advanced video transmission module that supports a 5.8GHz digital video signal and 720p 60fps image transmission.

Caddx Polar Micro Digital FPV Vista Camera Kit

6The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 32 ms. The vista unit can be mounted on a racing drone and used with DJI FPV Goggles or a remote controller to transmit video, control signals, and flight controller information wirelessly!
 
VIDEO: Caddx Polar Starlight Camera Review

Features

Lightweight digital image transmission combination
Stable and clear HD video
720p 60fps, 32ms/4km
8 channels, 8 drones


Specifications

Transmitter Power(EIPP): FCC/SRRC: &lt30dBm CE: &lt14dBm
Max.Transmission Distance: FCC/SRRC:4kmCE:0.7km
Operating Temperature Range: 0°to 40°C（32°to 104°F）
Image Sensor: 1/1.8" Inch 2.3Mega starlight sensor
Supported Flight Control System: BetaFlight
Min.Latency(end-to-end): 720p 60fps&lt32ms
Polar vista kit Weight (Include camera): 28g
Operating Frequency: 5.725-5.850GHz
I/O Interface: USB-C,IPEX,3-in-1 port
FOV: 162°(D) 138°(H) 75°(V)
Min. Illumination: 0.00003Lux
Antenna Weight: 1.5g(IPEX)
Polar cam: 24×19×19mm
Input Power: 7.4-26.4V
Coaxial Cable: 120mm
LENS: F/1.6 &amp 8Mega
Vista: 30×29×13.5mm
Aspect Ratio: 16:9
Antenna: 105mm

Includes 

1x Caddx Polar Micro Digital FPV Vista Camera Kit (Silver or Coffee options)
6x M2 Screws (3/4/5mm)
4x Gasket Ring
1x 3-in-1 Cable


6The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 32 ms. The vista unit can be mounted on a racing drone and used with DJI FPV Goggles o

Antenna Connector

Antennas send signals to and from your VRX/VTX and RX/TX. Many video transmitters and radio receivers come with antennas. Ensure if you need them. Or choose upgrades to increase range and penetration. Select appropriate antennas based on connector, radio frequency, and polarization (if circularly polarized). 

Antennas

VTX Frequency

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.

Video Transmitters

VTX Stack Mount

Max Transmission Power

Digital / Analog VTX

FPV Camera Included

VTX Antenna Connector

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 

FPV Cameras

NDAA Compliant products include parts and gear that adhere to the requirements outlined in Section 848 of the National Defense Authorization Act