FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Walksnail

Walksnail RedBird Antenna V2 5.8GHz For Avatar Goggles X - RP-SMA, LHCP

Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X
Check out all our RP-SMA antennas and our selection of Walksnail HD products!
Features


Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated RP-SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenarios.
Circularly polarised design with nearly perfect axial ratio.

Specifications

Bandwidth 5600-6000MHz
Polarization LHCP
Gain 1.5dBi
VSWR &amplt1.4
Efficiency 97%
Connector RP-SMA
Weight 3.5g
Size R15.5mm H20.5mm



Includes

2x Walksnail Redbird Antenna V2 For Avatar Goggles X


Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X Check out all our RP-SMA antennas and our selection of Walksnail HD products! Features Antenna unit using Laser-Direct-structuring for small size and high performance. Customised integrated RP-SMA socket, antenna height is only 20mm. Red

Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) - LHCP from WREKD Co.

Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) - LHCP

CADDX

Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X
Check out all our RP-SMA antennas and our selection of Walksnail HD products!
Features


Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated RP-SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenarios.
Circularly polarised design with nearly perfect axial ratio.

Specifications

Bandwidth 5600-6000MHz
Polarization LHCP
Gain 1.5dBi
VSWR &lt1.4
Efficiency 97%
Connector RP-SMA
Weight 3.5g
Size R15.5mm H20.5mm



Includes

2x Walksnail Redbird Antenna V2 For Avatar Goggles X


Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) 

Experience unparalleled performance with the Walksnail Redbird Antenna V2, meticulously crafted for the Avatar Goggles X.

Walksnail Redbird Antenna V2 (Set of 2) - Avatar Goggles X

CADDX FPV

<p> </p>
<ul>
<li>Antenna unit using Laser-Direct-structuring for small size and high performance.</li>
<li>Customised integrated SMA socket, antenna height is only 20mm.</li>
<li>Redbird Antenna V2 for a wide range of flight scenarios.</li>
<li>Circularly polarised design with nearly perfect axial ratio.</li>
</ul>
<p>Parameter：</p>
<table width="100%" data-mce-fragment="1">
<tbody data-mce-fragment="1">
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Bandwidth</td>
<td style="width: 68.1665%" data-mce-fragment="1">5600-6000MHz</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Polarization</td>
<td style="width: 68.1665%" data-mce-fragment="1">LHCP</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Gain</td>
<td style="width: 68.1665%" data-mce-fragment="1">1.5dBi</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">VSWR</td>
<td style="width: 68.1665%" data-mce-fragment="1">&lt1.4</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Efficiency</td>
<td style="width: 68.1665%" data-mce-fragment="1">97%</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Connector<span> </span>
</td>
<td style="width: 68.1665%" data-mce-fragment="1">SMA-RP</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Weight</td>
<td style="width: 68.1665%" data-mce-fragment="1">3.5g</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Size</td>
<td style="width: 68.1665%" data-mce-fragment="1">R15.5mm H20.5mm</td>
</tr>
</tbody>
</table>

  Antenna unit using Laser-Direct-structuring for small size and high performance. Customised integrated SMA socket, antenna height is only 20mm. Redbird Antenna V2 for a wide range of flight scenarios. Circularly polarised design with nearly perfect axial ratio. Parameter： Bandwidth 5600-6000MHz Polarization LHCP Gain

Walksnail Redbird Antenna V2 For Avatar HD Goggles X (2pcs) – CADDX FPV

 

Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenari

Walksnail Redbird Antenna V2 For Avatar HD Goggles X (2pcs)

Antenna Connector

Antennas send signals to and from your VRX/VTX and RX/TX. Many video transmitters and radio receivers come with antennas. Ensure if you need them. Or choose upgrades to increase range and penetration. Select appropriate antennas based on connector, radio frequency, and polarization (if circularly polarized). 

Antennas

Antenna Frequency

Polarization

Walksnail Avatar HD VTX V2 U.FL Antenna

CADDXFPV

<div style="text-align: left"><img style="float: none" alt="" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/582db34c51886c33c855ac0de0eaf7c4.jpg?v=1679276275"></div>
<p>The quality of the antenna is also the punchline during flying. To further improve performance, we have redesigned the antenna. After repeated testing and optimization, the brand new antenna whose performance can almost achieve the effect that originally required two.<br><br>This antenna has been designed with advanced technology and materials to ensure which provides excellent signal reception and transmission in all environments. After testing, it showed significant improvements in signal stability, range, and penetration. This means that drone using this antenna would be lighter, more flexible, and easier to carry and operate. </p>
<table width="100%">
<tbody>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left"><strong>Specification</strong></td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left"> </td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left"><strong>Avatar V2 antenna</strong></td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left"></td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Polarization</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">LHCP</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Frequency range</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">5600MHz-6000MHz</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Gain</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">1.9dBi<br>
</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">VSWR</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">＜1.5</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Input Impedance</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">50Ω</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Interface</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">IPEX-1</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Size</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">R15 X 45mm （without cable）</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Weight</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">2g</td>
</tr>
</tbody>
</table>

The quality of the antenna is also the punchline during flying. To further improve performance, we have redesigned the antenna. After repeated testing and optimization, the brand new antenna whose performance can almost achieve the effect that originally required two.This antenna has been designed with advanced technol

Walksnail VTX V2 Antenna – CADDX FPV


The quality of the antenna is also the punchline during flying. To further improve performance, we have redesigned the antenna. After repeated testing and optimization, the brand new antenna whose pe

Walksnail VTX V2 Antenna

Replacement antenna for the Walksnail Avatar VTX
Check out all our U.FL VTX antennas and our selection of Walksnail HD products!
Specifications


Polarization: LHCP
Bandwidth: 5600MHz-6000MHz

Gain: 1.9dBi Average
VSWR: &amplt=1.5

Connector: U.fl
Length: 105mm
Size: R15 X 45mm (without cable）
Weight: 2g


Includes


1x Walksnail Avatar HD VTX U.FL Antenna V2


Replacement antenna for the Walksnail Avatar VTX Check out all our U.FL VTX antennas and our selection of Walksnail HD products! Specifications Polarization: LHCP Bandwidth: 5600MHz-6000MHz Gain: 1.9dBi Average VSWR: &lt;=1.5 Connector: U.fl Length: 105mm Size: R15 X 45mm (without cable） Weight: 2g Includes 1x Walksnai

Walksnail Avatar HD VTX U.FL Antenna V2 from WREKD Co.

Walksnail Avatar HD VTX U.FL Antenna V2

Replacement antenna for the Walksnail Avatar VTX
Specifications

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz

Gain: 1.9dBi Average
VSWR: &amplt=1.5
Connector: U.fl
Length: 105mm
Size: R15 X 45mm (without cable）
Weight: 2g

Includes

1x Walksnail Avatar HD VTX U.FL Antenna V2


Upgrade your drone's performance with the Walksnail Avatar HD VTX U.FL Antenna V2. Boost range and quality for an unbeatable flying experience.

Replacement antenna for the Walksnail Avatar VTX
Check out all our U.FL VTX antennas and our selection of Walksnail HD products!
Specifications


Polarization: LHCP
Bandwidth: 5600MHz-6000MHz

Gain: 1.9dBi Average
VSWR: &lt=1.5

Connector: U.fl
Length: 105mm
Size: R15 X 45mm (without cable）
Weight: 2g


Includes


1x Walksnail Avatar HD VTX U.FL Antenna V2


Walksnail Patch Antenna V2 5.8GHz For Avatar Goggles X - RP-SMA, LHCP

Unleash powerful performance with this advanced Walksnail Patch Antenna for the Avatar Goggles X.

Walksnail Patch Antenna V2 - Avatar Goggles X

Quality patch antenna from Walksnail designed for the Goggles X.
Check out all our U.FL VTX antennas and our selection of Walksnail HD products!
Features


Integrated dual antenna mask for easy installation.

It weighs only 32g and is comfortable to wear.

Antenna with professional RF substrate.

Right-angle SMA-RP connector with rubber handwheel.

Specifications

Bandwidth: 5600-6000MHz

Polarization: LHCP

Gain: 6.7dBi

VSWR: &lt1.4

Efficiency: 97%

Beam-width: 127°

Connector: SMA-RP

Weight: 9.6g (single antenna ) 32g (total)

Size: W146mm L35mm H10mm


Includes

1x Walksnail Patch Antenna V2 5.8GHz RP-SMA For Avatar Goggles X - LHCP



Quality patch antenna from Walksnail designed for the Goggles X. Check out all our U.FL VTX antennas and our selection of Walksnail HD products! Features Integrated dual antenna mask for easy installation. It weighs only 32g and is comfortable to wear. Antenna with professional RF substrate. Right-angle SMA-RP connecto

Walksnail Patch Antenna V2 5.8GHz RP-SMA For Avatar Goggles X - LHCP

Integrated dual antenna mask for easy installation. Weighs only 32g and is comfortable to wear. Antenna with professional RF substrate. Right-angle SMA-RP connector with rubber handwheel. bandwidth 5600-6000MHz Polarization LHCP Gain 6.7dBi VSWR 1.4 Efficiency 97% Beam-width 127 Connector SMA-RP Weight 9.6g (single ant

Walksnail Patch Antenna V2 For Avatar Goggles X

Increase your range and penetration with these patch antennas for the Walksnail Avatar Goggles X Don't forget to check out the rest of our LHCP FPV Antenna's as well as our Walksnail Products! Features: Integrated dual antenna mask for easy installation. Weighs only 32g and is comfortable to wear. Antenna with professi

NewBeeDrone

NewBeeDrone Pagoda Antenna DIY Kit - LHCP

Introducing the NewBeeDrone DIY Pagoda Antenna Kit!
Who doesn't love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you're out flying and have to explain how you personally built your quad, you can say you even built your antenna! Show off the only hexagonal shape pagoda antenna on the market at your next race or meet. Ever try to build a cloverleaf style 5.8ghz antenna? It's HARD!!! Not this kit. Now you can easily build your own pagoda antenna at home and all you need is a Soldering iron. The kit comes with a jig to perfectly and easily space the pagoda PCBs during construction. The antenna can be used as a receiver or transmitter antenna and pairs well with other LHCP circular polarized antenna styles. The coax cable is semi-rigid and has a standard SMA connector.
 
Specs: 

Size - 52mm x 23mm
Weight - 7 grams
Band - 5.8ghz
Polarization - LHCP or RHCP
Gain - 2dbic
Radiation Efficiency 96.5%
Axial Ratio - &lt1.3
Standing-wave ratio - S11 &lt -20 dB
VSWR &lt 1.22
Connector - SMA

 


Introducing the NewBeeDrone DIY Pagoda Antenna Kit! Who doesn't love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you're out flying and have to explain how you personally built your quad, you can say you even built your an

NewBeeDrone Pagoda Antenna DIY Kit LHCP

NewBeeDrone Pagoda Antenna DIY Kit LHCP 
Introducing the NewBeeDrone DIY Pagoda Antenna Kit!
Who doesn&#39t love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you&#39re out flying and have to explain how you personally built your quad, you can say you even built your antenna! Show off the only hexagonal shape pagoda antenna on the market at your next race or meet. Ever try to build a cloverleaf style 5.8ghz antenna? It&#39s HARD!!! Not this kit. Now you can easily build your own pagoda antenna at home and all you need is a Soldering iron. The kit comes with a jig to perfectly and easily space the pagoda PCBs during construction. The antenna can be used as a receiver or transmitter antenna and pairs well with other LHCP circular polarized antenna styles. The coax cable is semi-rigid and has a standard SMA connector.
 
Specs: 

Size - 52mm x 23mm
Weight - 7 grams
Band - 5.8ghz
Polarization - LHCP or RHCP
Gain - 2dbic
Radiation Efficiency 96.5%
Axial Ratio - &amplt1.3
Standing-wave ratio - S11 &amplt -20 dB
VSWR &amplt 1.22
Connector - SMA

 


NewBeeDrone Pagoda Antenna DIY Kit LHCP  Introducing the NewBeeDrone DIY Pagoda Antenna Kit! Who doesn't love a little DIY project? With the NewBeeDrone Pagoda 5.8ghz DIY Kit, you can feel satisfied knowing your great FPV range is your doing. Next time you're out flying and have to explain how you personally built your

NewBeeDrone Pagoda Antenna DIY Kit LHCP from WREKD Co.

NewBeeDrone BeeBrain Clover 5.8GHz Antenna - LHCP

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP)
The BeeBrain Clover 5.8GHz 4 leaf polarized antenna is a great alternative that helps reject‚ multipath interference, which is a common problem on standard dipole stock antennas. 
Using an RHCP or LHCP antenna is beneficial for use at races where lots of pilots are up in the air at the same time to help separate video bleed over by being on different polarization channels. Just make sure to use an RHCP/LHCP antenna on your BeeBrain and your Video Goggles at the same time to have the best signal separation as possible. 
This antenna has a U.FL connector that is plug-n-play with the BeeBrain V2 and BeeBrain Lite making it a simple swap that requires no soldering. 
 
Specifications:

Weight: approx 1.7g
Length: 50mm (connector to top of lobe) 
Polarization: LHCP or RHCP
Connector Type: U.FL (3mm)
Frequency: 5.8Ghz
Cable: Flexible RG178


NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP) The BeeBrain Clover 5.8GHz 4 leaf polarized antenna is a great alternative that helps reject‚ multipath interference, which is a common problem on standard dipole stock antennas.  Using an RHCP or LHCP antenna is beneficial for use at races where lots of pilots are up i

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP)

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP) from WREKD Co.

TrueRC

TrueRC X2-AIR MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP

More gain and more convenience! The X&sup2-AIR for DJI FPV combines two antennas on a single connector. Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying.

More gain and more convenience! The X²-AIR for DJI FPV combines two antennas on a single connector. Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying.

TrueRC X²-AIR 5.8GHz MK II Antenna for DJI Goggles (Set of 2) - LHCP

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of singularity stubby and performances never been so convenient!
Check out all our FPV Receivers &ampamp Antennas, and all our TrueRC gear!
Features

Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors

Specifications

Bandwidth: 5.1GHz-7.0GHz

Polarization: LHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72mm x 34mm x 15mm

Connection: Custom knurled RP-SMA

Weight: 20g

Includes

2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP





More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield a

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP from WREKD Co.

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP

TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI HD Goggles - LHCP

TRUERC

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of singularity stubby and performances never been so convenient!
Check out all our FPV Receivers &amp Antennas, and all our TrueRC gear!
Features

Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors

Specifications

Bandwidth: 5.1GHz-7.0GHz

Polarization: LHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72mm x 34mm x 15mm

Connection: Custom knurled RP-SMA

Weight: 20g

Includes

2x TrueRC X2-Air MKII 5.8GHz Receiver Antenna Pair for DJI - LHCP





TrueRC X2-AIR MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI - LHCP

TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI HD Goggles - LHCP

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out all our FPV Receivers &amp Antennas, and all our TrueRC gear!
Features

Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors
Highly compact included stubby antennas for combined directional and omnidirectional coverage

Specifications
X2-Air

Bandwidth: 5.1GHz-7.0GHz

Polarization: LHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72mm x 34mm x 15mm

Connection: Custom knurled RP-SMA

Weight: 20g

Stubby

Bandwidth: 5.6GHz-6.0GHz

Polarization: LHCP
Gain: 1.9 dBic

Radiation Efficiency: 99%
Antenna Dimensions: 12.7mm x 20mm

Connection: RP-SMA

Weight: 3.7g

Includes

2x TrueRC X2-Air MKII  5.8GHz Receiver Antenna
2x TrueRC  Stubby 5.8GHz Receiver Antenna






The LHCP TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI offers more gain and convenience than ever before. Get unreal performance today!

TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI - LHCP

LHCP TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI for Sale

TrueRC X²-AIR 5.8GHz MK II Antenna Combo Kit w/ Singularity Antennas - LHCP

More gain and more convenience! This is the adaptation of the all mighty X²-AIR into a slick low profile face mount for the DJI goggles . Simply peel the included adhesive, stick them on and throw your goggles in your bag ready for a day of flying. Improved 13dBic gain and massive combined beam width of 180deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out all our FPV Receivers &ampamp Antennas, and all our TrueRC gear!
Features

Sector type beam shape (widest on horizontal)
Mount direct on DJI faceplate with included adhesive backing
Compact low-profile design on your goggles, easy to store and transport
High 13 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
Super wide 150 degree beam for each antenna combining to 180deg beam width
Custom knurled RP-SMA connectors
Highly compact included stubby antennas for combined directional and omnidirectional coverage

Specifications
X2-Air

Bandwidth: 5.1GHz-7.0GHz

Polarization: LHCP
Gain: 13 dBic

Beam-Width: 150deg

Beam-width @-3dB:  75deg

Antenna Dimensions: 72mm x 34mm x 15mm

Connection: Custom knurled RP-SMA

Weight: 20g

Stubby

Bandwidth: 5.6GHz-6.0GHz

Polarization: LHCP
Gain: 1.9 dBic

Radiation Efficiency: 99%
Antenna Dimensions: 12.7mm x 20mm

Connection: RP-SMA

Weight: 3.7g

Includes

2x TrueRC X2-Air MKII  5.8GHz Receiver Antenna
2x TrueRC  Stubby 5.8GHz Receiver Antenna






TrueRC X2-Air MKII & Stubbies 5.8GHz Receiver Antenna Set for DJI - LHCP from WREKD Co.

TrueRC Singularity 5.8GHz Stubby Receiver Antenna for DJI - LHCP

4-pack of singularity 5.8 stubby made especially for the DJI fpv system goggle. Antennas are direct fit with much lower profile than stock and over 50% more range! SPECS: Gain: 1.9dbic Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwidth: 5.6GHz-6.0GHz Radiation Efficiency: 99% SWR: &lt;=1.5:1 Weight: 3.7 g Size: 12.7m

TrueRC Singularity 5.8 Stubby For DJI HD Goggles - (4-Pack for DJI)

This singularity 5.8 stubby was made especially for the DJI Digital FPV System Goggles. The antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications


Polarization: LHCP
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm 
Connector: RP-SMA

Includes


1x TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI


This singularity 5.8 stubby was made especially for the DJI Digital FPV System Goggles. The antennas are direct fit with much lower profile than stock and over 50% more range! Check out all our DJI compatible gear, and all our TrueRC products! Specifications Polarization: LHCP Gain: 1.9dbic Cross-Polar Rejection: -15 t

TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI (1PC) - Choose Color

TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI (1PC) - Choose

The Singularity antenna from TrueRC now comes in a "stubby" form factor. Smaller than ever while maintaining durability due to a thicker housing. Specifications Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwidth: 5.6GHz-6.0GHz Radiation Efficiency: 99% Polarization: LHCP SWR: &lt;=1.5:1 Weight: 3.7 g Size: 12.7mm x 2

TrueRC Singularity 5.8 Stubby Antenna (1PC-LHCP) - SMA

This singularity 5.8 stubby was made especially for the DJI Digital FPV System Goggles. The antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications


Polarization: LHCP
Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm 
Connector: RP-SMA

Includes


1x TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI


TrueRC Singularity 5.8GHz Stubby RP-SMA Antenna for DJI (1PC) - Choose Color from WREKD Co.

TrueRC Singularity 5.8 Stubby For DJI HD Goggles - Black (4-Pack for DJI)

4-pack of singularity 5.8 stubby made especially for the DJI fpv system goggle. Antennas are direct fit with much lower profile than stock and over 50% more range! Check out our other DJI HD Antennas and the rest of our TrueRC Products! Specifications: Gain: 1.9dbic Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwidth:

TrueRC Singularity 5.8 Clear Stubby For DJI HD Goggles - LHCP (RP-SMA 4-Pack)

&nbspA 4-pack of singularity 5.8GHz stubbies by TrueRC made specifically to fit the&nbspDJI Digital HD FPV Goggle.&nbsp

 A 4-pack of singularity 5.8GHz stubbies by TrueRC made specifically to fit the DJI Digital HD FPV Goggle. 

TrueRC Singularity Stubby 5.8GHz Antenna Set for DJI (LHCP) (RP-SMA - 4pcs)

4-pack of singularity 5.8 stubby made especially for the DJI Digital FPV System Goggles. Antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications


Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm (PDF)

Connector: RP-SMA

Includes


4x TrueRC Singularity 5.8GHz Stubby Receiver Antenna


4-pack of singularity 5.8 stubby made especially for the DJI Digital FPV System Goggles. Antennas are direct fit with much lower profile than stock and over 50% more range! Check out all our DJI compatible gear, and all our TrueRC products! Specifications Gain: 1.9dbic Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwid

TrueRC Singularity 5.8GHz Stubby Receiver Antenna 4 Pack for DJI - Choose Color from WREKD Co.

TrueRC Singularity 5.8GHz Stubby Receiver Antenna 4 Pack for DJI - Choose Color

4-pack of singularity 5.8 stubby made especially for the DJI Digital FPV System Goggles. Antennas are direct fit with much lower profile than stock and over 50% more range!
Check out all our DJI compatible gear, and all our TrueRC products!
Specifications


Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 3.7 g
Size: 12.7mm x 20mm (PDF)

Connector: RP-SMA

Includes


4x TrueRC Singularity 5.8GHz Stubby Receiver Antenna


TrueRC Singularity 5.8GHz Stubby Receiver Antenna 4 Pack for DJI - Cho

TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna for DJI - LHCP

The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors.
Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear!
Specifications

Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 6.2 g
Size: 12.7mm x 70mm
Cable: Carbon fiber reinforced
Connector: RP-SMA

Includes

1x TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna - LHCP


You'll love the clean and lightweight TrueRC Matchstick Carbon Edition 5.8GHz LHCP RP-SMA DJI Antenna available at RDQ! Carbon Fiber reinforces this antenna for increased durability.

TrueRC Matchstick Carbon Edition 5.8GHz LHCP RP-SMA DJI Antenna for Sale

The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors.
Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear!
Specifications

Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 6.2 g
Size: 12.7mm x 70mm
Cable: Carbon fiber reinforced
Connector: RP-SMA

Includes

1x TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna - LHCP


The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors. Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear! Specifica

TrueRC Matchstick Carbon Edition 5.8GHz RP-SMA Antenna for DJI - LHCP from WREKD Co.

The matchstick 5.8 carbon edition is a stylish and flexible carbon fiber reinforced antenna for solid durability and a clean look. These are a limited LHCP run with RP-SMA connectors and are perfect for the DJI air unit!Check out our other DJI HD Antennas and the rest of our TrueRC Products! SPECIFICATIONS: Gain: 1.9db

TRUERC Matchstick 5.8 - SHORT - LHCP - RP-SMA – Carbon Edition for DJI

TrueRC Matchstick Carbon Edition 5.8GHz Long RP-SMA Antenna for DJI - LHCP

The matchstick 5.8 carbon edition is a stylish and flexible carbon fiber reinforced antenna for solid durability and a clean look. These are a limited LHCP run with RP-SMA connectors and are perfect for the DJI air unit!Check out our other DJI HD Antennas and the rest of our TrueRC Products! SPECIFICATIONS: Gain: 1.9db

TRUERC MATCHSTICK 5.8 - LONG - LHCP - RP-SMA – CARBON EDITION for DJI

The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors.
Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear!
Specifications

Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight (long): 7.8 g
Size: 12.7mm x 125mm
Cable: Carbon fiber reinforced
Connector: RP-SMA

Includes

1x TrueRC Matchstick Carbon Edition 5.8GHz Long RP-SMA Antenna - LHCP


TrueRC Matchstick Carbon Edition 5.8GHz Long RP-SMA Antenna for DJI - 

The matchstick 5.8 is a singularity using the hardened case of the stubby version and a real carbon fiber reinforced coax cable. That make it our most durable ever antenna, ready to survive the worst.Check out our other 5.8GHz Antennas and the rest of our TrueRC Products! SPECIFICATIONS: Gain: 1.9dbic Cross-Polar Rejec

TrueRC Matchstick 5.8GHz LHCP Carbon Edition - RP-SMA 200mm - Choose Color

The matchstick 5.8 carbon edition feature a sleek and flexible carbon fiber reinforced cable for great durability and an amazing look. These are a limited LHCP run with RP-SMA connectors.
Check out all our DJI compatible gear, our ever expanding selection of FPV Receiver antennas and our range of TrueRC gear!
Specifications

Gain: 1.9dbic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight (long): 7.8 g
Size: 12.7mm x 125mm
Cable: Carbon fiber reinforced
Connector: RP-SMA

Includes

1x TrueRC Matchstick Carbon Edition 5.8GHz Long RP-SMA Antenna - LHCP


TrueRC Matchstick Carbon Edition 5.8GHz Long RP-SMA Antenna for DJI - LHCP from WREKD Co.

VAS (Video Aerial Systems)

VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles V2 - LHCP

High Definition FPV just got better reception! The BlueBeam® HD is a dual band (2.4/5.8GHz)omni directional antenna designed specifically for High definition video systems and WiFi links. Unlike other antennas which are only tuned for one band, the BlueBeam® HD comprises 2 complete antenna systems working in harmony to create a truly circular wave on both bands at the same time, virtually eliminating pixelization of the video link in difficult RF environments. Designed by IBCrazy and manufactured in the USA, the BlueBeam® HD utilizes patent  pending technology not found in any other antenna.
Check out all our DJI compatible gear, and all our VAS gear!
Specifications

Polarizaton: LHCP
Frequency range: 2380-2600MHz (2.4GHz) / 5500-6200MHz (5.8GHz)
Gain: 1.95dbic (2.4GHz) / 2.5dbic (5.8GHz)
Connector: RP-SMA

Includes

1x VAS BlueBeam HD 2.4/5.8GHz Dual Band Receiver Antenna for DJI Goggles V2


The LHCP VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles are perfect for your making HD FPV even better. Experience the clarity today.

VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles V2 2 Pack - LHCP

LHCP VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles for Sale

High Definition FPV just got better reception! The BlueBeam® HD is a dual band (2.4/5.8GHz)omni directional antenna designed specifically for High definition video systems and WiFi links. Unlike other antennas which are only tuned for one band, the BlueBeam® HD comprises 2 complete antenna systems working in harmony to

VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Antennas for DJI Goggles V2 - 2 Pack - LHCP

The BlueBeam® HD is a dual band (2.4/5.8GHz)omni directional antenna designed specifically for High definition video systems and WiFi links. Unlike other antennas which are only tuned for one band, the BlueBeam® HD comprises 2 complete antenna systems working in harmony to create a truly circular wave on both bands at the same time, virtually eliminating pixelization of the video link in difficult RF environments. Designed by IBCrazy and manufactured in the USA, the BlueBeam® HD utilizes patent  pending technology not found in any other antenna.

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

VAS Bluebeam® HD (RPSMA) 2-pk LHCP - RMRC

VAS Bluebeam® HD (RPSMA) 2-pk LHCP

Video Aerial Systems (VAS)

VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles V2 2 Pack - LHCP from WREKD Co.

TrueRC BLAZE 5.8GHz SMA Antenna - LHCP, Regular (72mm)

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing. ‘
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with True-SMA connector.





Specifications


Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 3g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 72mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: True-SMA
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (72mm) SMA Antenna - LHCP - Choose Your Color
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum. Check out the rest of our VTX Antennas, and our range of TrueRC gear! 

TrueRC BLAZE 5.8GHz Regular (72mm) SMA Antenna - LHCP - Choose Your Color from WREKD Co.

TrueRC BLAZE 5.8GHz Regular (72mm) SMA Antenna - LHCP - Choose Your Color

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing. ‘
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with True-SMA connector.





Specifications


Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 3g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 72mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: True-SMA
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (72mm) SMA Antenna - LHCP - Choose Your Color
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Regular (72mm) SMA Antenna - LHCP - Choose Your Co

TrueRC BLAZE 5.8GHz U.FL Antenna for Caddx Vista - LHCP

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 3g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 45mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP 
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP - Choose Your Color from WREKD Co.

TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP - Choose Your Color

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 3g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 45mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP 
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP - Choose Your C

The Blaze 5.8GHz features TrueRC's latest high-fidelity-circular-polarized-antenna-design plus the CREE™ XQ-E high-intensity LED!

TrueRC Blaze 5.8GHz Antenna

TrueRC BLAZE 5.8GHz 90° MMCX Antenna - LHCP, Regular (72mm)

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with 90° MMCX.





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 4g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 72mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: 90° MMCX
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (72mm) 90° MMCX Antenna - LHCP - Choose Your Color
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Regular (72mm) 90° MMCX Antenna - LHCP - Choose Your Color

TrueRC BLAZE 5.8GHz Regular (72mm) 90° MMCX Antenna - LHCP - Choose Yo

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with 90° MMCX.





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 4g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 72mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: 90° MMCX
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (72mm) 90° MMCX Antenna - LHCP - Choose Your Color
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Regular (72mm) 90° MMCX Antenna - LHCP - Choose Your Color from WREKD Co.

TrueRC BLAZE 5.8GHz U.FL Antenna - LHCP, Long (110mm)

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 4g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 110mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP - Choose Your Color

TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP - Choose Your Col

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 4g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 110mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP - Choose Your Color from WREKD Co.

TrueRC BLAZE 5.8GHz SMA Antenna - LHCP, Long (110mm)

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing. ‘
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with True-SMA connector.





Specifications


Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 10g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 110mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: True-SMA
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Long (110mm) SMA Antenna - LHCP - Choose Your Color
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Long (110mm) SMA Antenna - LHCP - Choose Your Color from WREKD Co.

TrueRC BLAZE 5.8GHz Long (110mm) SMA Antenna - LHCP - Choose Your Color

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing. ‘
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with True-SMA connector.





Specifications


Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 10g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 110mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: True-SMA
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Long (110mm) SMA Antenna - LHCP - Choose Your Color
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Long (110mm) SMA Antenna - LHCP - Choose Your Colo

TrueRC BLAZE 5.8GHz 90° MMCX Antenna - LHCP, Long (110mm)

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with 90° MMCX.





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 6g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 110mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: 90° MMCX
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Long (110mm) 90° MMCX Antenna - LHCP - Choose Your Color
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Long (110mm) 90° MMCX Antenna - LHCP - Choose Your Color

TrueRC BLAZE 5.8GHz Long (110mm) 90° MMCX Antenna - LHCP - Choose Your

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with 90° MMCX.





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 6g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 110mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: 90° MMCX
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Long (110mm) 90° MMCX Antenna - LHCP - Choose Your Color
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Long (110mm) 90° MMCX Antenna - LHCP - Choose Your Color from WREKD Co.

HGLRC

HGLRC Long Range Hammer 5.8GHz 90° MMCX Antenna - LHCP

A long range mini antenna with a 2.5dbi gain punch!
Check out all our VTX Antennas and our collection of HGLRC products!
Specifications

Frequency range(MHz): 5500-6000
Polarization: LHCP
Gain(dBi): 2.5db
Input Impedance(Ω): 50
VSWR(5800MHZ): ≤1.5
Maximum input power(W):50
Input connector type: 90° MMCX
Radome material: ABS
Length: 135mm
Weight: 4g

Includes

1x HGLRC Long Range Hammer 5.8GHz 90° MMCX Antenna - LHCP


A long range mini antenna with a 2.5dbi gain punch! Check out all our VTX Antennas and our collection of HGLRC products! Specifications Frequency range(MHz): 5500-6000 Polarization: LHCP Gain(dBi): 2.5db Input Impedance(Ω): 50 VSWR(5800MHZ): ≤1.5 Maximum input power(W):50 Input connector type: 90° MMCX Radome material:

HGLRC Long Range Hammer 5.8GHz 90° MMCX Antenna - LHCP from WREKD Co.

Foxeer

Foxeer Echo 2 5.8GHz SMA Patch Feeder Antenna - LHCP

FOXEER

The Foxeer Echo 2 Patch Antenna is designed for maximum power and performance. Constructed of premium materials, it offers impressive signal strength and 9.4dBi gain in a light, durable form factor. Get maximum range with optimal use of your 5.8G signal. This antenna come with left hand polarization and has a SMA connector. 
Check out all our VTX antennas, and our ever growing selection of Foxeer products.
Features

Same size as the old ones, though much better performance
Double Layer Board Design


Specifications 

Shell Material: PCB+ABS
Weight: 10.4g
Antenna Dimension: 34x34x61mm
Center frequency: 5.8GHz
Gain: 9bBi
Beam width: 120 degree
Beam width (-3dB): 70 degree
Bandwidth: 500 MHz (5.5-6.0 GHz)
Matching: VSWR &lt 1.15  (at center frequency)
Impedance: 50Ω

Radiation efficiency: 98%
Polarization: LHCP/RHCP
Connector: SMA
Color: Black  

Includes

Foxeer Echo 2 5.8Ghz SMA Patch Feeder Antenna LHCP - Black


The Foxeer Echo 2 Patch Antenna is designed for maximum power and performance. Constructed of premium materials, it offers impressive signal strength and 9.4dBi gain in a light, durable form factor. Get maximum range with optimal use of your 5.8G signal. This antenna come with left hand polarization and has a SMA conne

Foxeer Echo 2 5.8Ghz SMA Patch Feeder Antenna LHCP - Black

The Foxeer Echo 2 Patch Antenna is designed for maximum power and performance. Constructed of premium materials, it offers impressive signal strength and 9.4dBi gain in a light, durable form factor. Get maximum range with optimal use of your 5.8G signal. This antenna come with left hand polarization and has a SMA connector. 
Check out all our VTX antennas, and our ever growing selection of Foxeer products.
Features

Same size as the old ones, though much better performance
Double Layer Board Design


Specifications 

Shell Material: PCB+ABS
Weight: 10.4g
Antenna Dimension: 34x34x61mm
Center frequency: 5.8GHz
Gain: 9bBi
Beam width: 120 degree
Beam width (-3dB): 70 degree
Bandwidth: 500 MHz (5.5-6.0 GHz)
Matching: VSWR &amplt 1.15  (at center frequency)
Impedance: 50Ω

Radiation efficiency: 98%
Polarization: LHCP/RHCP
Connector: SMA
Color: Black  

Includes

Foxeer Echo 2 5.8Ghz SMA Patch Feeder Antenna LHCP - Black


Foxeer Echo 2 5.8Ghz SMA Patch Feeder Antenna LHCP - Black from WREKD Co.

Foxeer Echo 2 5.8GHz RP-SMA Patch Feeder Antenna - LHCP

The Foxeer Echo 2 Patch Antenna is designed for maximum power and performance. Constructed of premium materials, it offers impressive signal strength and 9.4dBi gain in a light, durable form factor. Get maximum range with optimal use of your 5.8G signal. This antenna come with left hand polarization and has a RPSMA connector. 
Check out all our VTX antennas, and our ever growing selection of Foxeer products.
Features

Same size as the old ones, though much better performance
Double Layer Board Design


Specifications 

Shell Material: PCB+ABS
Weight: 10.4g
Antenna Dimension: 34x34x61mm
Center frequency: 5.8GHz
Gain: 9bBi
Beam width: 120 degree
Beam width (-3dB): 70 degree
Bandwidth: 500 MHz (5.5-6.0 GHz)
Matching: VSWR &lt 1.15  (at center frequency)
Impedance: 50Ω

Radiation efficiency: 98%
Polarization: LHCP
Connector: RP-SMA
Color: Black  

Includes

Foxeer Echo 2 5.8Ghz RP-SMA Patch Feeder Antenna LHCP - Black


The Foxeer Echo 2 Patch Antenna is designed for maximum power and performance. Constructed of premium materials, it offers impressive signal strength and 9.4dBi gain in a light, durable form factor. Get maximum range with optimal use of your 5.8G signal. This antenna come with left hand polarization and has a RPSMA con

Foxeer Echo 2 5.8Ghz RP-SMA Patch Feeder Antenna LHCP - Black

The Foxeer Echo 2 Patch Antenna is designed for maximum power and performance. Constructed of premium materials, it offers impressive signal strength and 9.4dBi gain in a light, durable form factor. Get maximum range with optimal use of your 5.8G signal. This antenna come with left hand polarization and has a RPSMA connector. 
Check out all our VTX antennas, and our ever growing selection of Foxeer products.
Features

Same size as the old ones, though much better performance
Double Layer Board Design


Specifications 

Shell Material: PCB+ABS
Weight: 10.4g
Antenna Dimension: 34x34x61mm
Center frequency: 5.8GHz
Gain: 9bBi
Beam width: 120 degree
Beam width (-3dB): 70 degree
Bandwidth: 500 MHz (5.5-6.0 GHz)
Matching: VSWR &amplt 1.15  (at center frequency)
Impedance: 50Ω

Radiation efficiency: 98%
Polarization: LHCP
Connector: RP-SMA
Color: Black  

Includes

Foxeer Echo 2 5.8Ghz RP-SMA Patch Feeder Antenna LHCP - Black
