FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

BetaFPV

BetaFPV T Dipole 2.4GHz RC Antenna - U.FL

BETAFPV

The dipole T antenna is designed and manufactured by BETAFPV for a 2.4G/915MHz/868MHz receiver. This antenna is omnidirectional. RF balun circuit comes with this dipole antenna, just inside the injected rubber enclosure. Every piece of the antenna is tested with the frequency spectrograph to make sure it works in the correct status.
A ton of ExpressLRS items are available now!

Specification

Coaxial cable length: 46mm/80mm

Antenna width: 60mm
Weight: 0.94g
Connector: IPEX MHF
Gain: 2dBi
VSWR: &lt1.4 (2.4G version) / &lt1.6 (915MHz/868MHz version)

Which antenna should I choose?  Are these antennas compatible with other receivers like Frsky or TBS receivers?
First, it is compatible with any receiver with an IPEX MHF connector. Note that do NOT use the antenna with the wrong frequency. Even they look almost the same outside, but different balun circuit inside. It will have totally different performance in the wrong frequency point. Second, the shorter 915MHz/868MHz antenna is just made for small whoop drones. If you expect full-range performance, highly recommend the longer version.

The BETAFPV dipole T antenna is omnidirectional. Below is the antenna 3D radiation pattern image.

RF Antenna Balun
What is a Balun and why should we use it in these dipole T antennas? In order for these balanced antennas to be fed by coaxial cable, an antenna balun is often included at the feed point. For more details, please check this article "What is a Balun: RF Antenna Balun".

For the dipole T antenna, the balun circuit is in the injected rubber enclosure. For the different antennas, there is a related balun circuit.


Package

2 * BETAFPV T antenna


The dipole T antenna is designed and manufactured by BETAFPV for a 2.4G/915MHz/868MHz receiver. This antenna is omnidirectional. RF balun circuit comes with this dipole antenna, just inside the injected rubber enclosure. Every piece of the antenna is tested with the frequency spectrograph to make sure it works in the c

BETAFPV Dipole T Antenna

RaceDayQuads

Designed and manufactured by BETA FPV for any 2.4GHz receiver with IPEX 1 / U.FL connector, this omnidirectional antenna includes an RF balun circuit integrated inside the injected rubber enclosure. Every antenna is tested with a frequency spectrograph to ensure a perfect tune!
Specifications

Coaxial Cable Length: 80mm or 46mm

Antenna Width: 60mm
Gain: 2dBi

VSWR: &lt1.4
Connector: IPEX MHF (IPEX 1 / U.FL)
Weight: 0.94g 

Includes

2x BetaFPV T Dipole 2.4GHz RC Antenna


Designed and manufactured by BETA FPV for any 2.4GHz receiver with IPEX 1 / U.FL connector, this omnidirectional antenna includes an RF balun circuit integrated inside the injected rubber enclosure. Every antenna is tested with a frequency spectrograph to ensure a perfect tune! Specifications Coaxial Cable Length: 80mm

BetaFPV T Dipole 2.4GHz RC Antenna 2 Pack - Choose Length

Designed and manufactured by BETA FPV for any 2.4GHz receiver with IPEX 1 / U.FL connector, this omnidirectional antenna includes an RF balun circuit integrated inside the injected rubber enclosure. Every antenna is tested with a frequency spectrograph to ensure a perfect tune!
Check out our RC Antennas and all our BetaFPV products!

Specifications

Coaxial Cable Length: 80mm or 46mm

Antenna Width: 60mm
Gain: 2dBi

VSWR: &lt1.4
Connector: IPEX MHF (IPEX 1 / U.FL)
Weight: 0.94g 

Includes

2x BetaFPV T Dipole 2.4GHz RC Antenna


Designed and manufactured by BETA FPV for any 2.4GHz receiver with IPEX 1 / U.FL connector, this omnidirectional antenna includes an RF balun circuit integrated inside the injected rubber enclosure. Every antenna is tested with a frequency spectrograph to ensure a perfect tune! Check out our RC Antennas and all our Bet

Designed and manufactured by BETA FPV for any 2.4GHz receiver with IPEX 1 / U.FL connector, this omnidirectional antenna includes an RF balun circuit integrated inside the injected rubber enclosure. Every antenna is tested with a frequency spectrograph to ensure a perfect tune!
Check out our RC Antennas and all our BetaFPV products!

Specifications

Coaxial Cable Length: 80mm or 46mm

Antenna Width: 60mm
Gain: 2dBi

VSWR: &amplt1.4
Connector: IPEX MHF (IPEX 1 / U.FL)
Weight: 0.94g 

Includes

2x BetaFPV T Dipole 2.4GHz RC Antenna


BetaFPV T Dipole 2.4GHz RC Antenna 2 Pack - Choose Length from WREKD Co.

Antenna Connector

Antennas send signals to and from your VRX/VTX and RX/TX. Many video transmitters and radio receivers come with antennas. Ensure if you need them. Or choose upgrades to increase range and penetration. Select appropriate antennas based on connector, radio frequency, and polarization (if circularly polarized). 

Antennas

Antenna Frequency

TBS Tracer Immortal T Antenna

Team BlackSheep

Ultra-compact T-shaped dipole antenna for TBS Tracer radio link

The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from light weight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and ground. 
The combination of weight, durability, expected range and performance is bar none with this antenna, and it is ideal for race and freestyle miniquad use.
SPECIFICATION:


Cable length: 80mm

Antenna width: 60mm 

Weight: 0.84g

Gain: 2dBi

VSWR: &lt 1.4

Expected range: Full range (15mi+/25km+ with TBS Tracer)



Ultra-compact T-shaped dipole antenna for TBS Tracer radio link The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from light weight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and gro

The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from light weight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and ground.  The combination of weight, durability, expected range and 

Team Blacksheep TBS Tracer Immortal T Antenna

Ultra-compact T-shaped dipole antenna for TBS Tracer radio link.

Five33

The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from light weight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and ground. 
The combination of weight, durability, expected range and performance is bar none with this antenna, and it is ideal for race and freestyle miniquad use.
SPECIFICATION:



Cable length
80mm


Antenna width
60mm


Weight
0.84g


Gain
2dBi


VSWR
&lt 1.4


Expected range
Full range (15mi+/25km+ with TBS Tracer)



DOWNLOADS

Tracer Immortal T Mount
TBS Tracer Immortal-T Antenna Arm Mount by SanderPuh
TBS Tracer Antenna Universal Mount Immortal-T by mocky
TBS Tracer T-antenna mount by ehitaja_fpv


TBS TRACER IMMORTAL T ANTENNA

Polarization

TBS Tracer Monopole RX Antenna

Set of 5pcs 2.4GHz monopole antenna for TBS Tracer Nano RX or any other receiver with IPEX / u.FL connector.

TBS Tracer Monopole RX Antenna (5pcs)

My Store

Set of 5pcs 2.4GHz monopole antenna for TBS Tracer Nano RX or any other receiver with IPEX / u.FL connector. Checkout All TBS Tracer and Accessories and our huge TBS Collection! SPECIFICATION Total length: 110mm Weight: 0.33g Connector: IPEX / u.FL Expected range: 3mi+/5km+ (with TBS Tracer) 

Team Blacksheep TBS Tracer Monopole RX Antenna (5PCS)

VAS (Video Aerial Systems)

VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles V2 - LHCP

High Definition FPV just got better reception! The BlueBeam® HD is a dual band (2.4/5.8GHz)omni directional antenna designed specifically for High definition video systems and WiFi links. Unlike other antennas which are only tuned for one band, the BlueBeam® HD comprises 2 complete antenna systems working in harmony to create a truly circular wave on both bands at the same time, virtually eliminating pixelization of the video link in difficult RF environments. Designed by IBCrazy and manufactured in the USA, the BlueBeam® HD utilizes patent  pending technology not found in any other antenna.
Check out all our DJI compatible gear, and all our VAS gear!
Specifications

Polarizaton: LHCP
Frequency range: 2380-2600MHz (2.4GHz) / 5500-6200MHz (5.8GHz)
Gain: 1.95dbic (2.4GHz) / 2.5dbic (5.8GHz)
Connector: RP-SMA

Includes

1x VAS BlueBeam HD 2.4/5.8GHz Dual Band Receiver Antenna for DJI Goggles V2


The LHCP VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles are perfect for your making HD FPV even better. Experience the clarity today.

VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles V2 2 Pack - LHCP

LHCP VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles for Sale

High Definition FPV just got better reception! The BlueBeam® HD is a dual band (2.4/5.8GHz)omni directional antenna designed specifically for High definition video systems and WiFi links. Unlike other antennas which are only tuned for one band, the BlueBeam® HD comprises 2 complete antenna systems working in harmony to

VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Antennas for DJI Goggles V2 - 2 Pack - LHCP

The BlueBeam® HD is a dual band (2.4/5.8GHz)omni directional antenna designed specifically for High definition video systems and WiFi links. Unlike other antennas which are only tuned for one band, the BlueBeam® HD comprises 2 complete antenna systems working in harmony to create a truly circular wave on both bands at the same time, virtually eliminating pixelization of the video link in difficult RF environments. Designed by IBCrazy and manufactured in the USA, the BlueBeam® HD utilizes patent  pending technology not found in any other antenna.

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

VAS Bluebeam® HD (RPSMA) 2-pk LHCP - RMRC

VAS Bluebeam® HD (RPSMA) 2-pk LHCP

Video Aerial Systems (VAS)

VAS BlueBeam HD 2.4/5.8GHz Dual Band RP-SMA Receiver Antennas for DJI Goggles V2 2 Pack - LHCP from WREKD Co.

TrueRC

TrueRC BARDpole 2.4GHz U.FL Antenna

Introducing the TrueRC BARDpole 2.4 GHz Antenna! This antenna is the collaboration between TrueRC and BARD. It is a planar bazooka dipole antenna for TBS Tracer receiver, IRC Ghost, or other 2.4 GHz systems. This end-fed dipole is designed to get the most range out of your control link by retaining a uniform radiation pattern.

Introducing the TrueRC BARDpole 2.4 GHz Antenna! This antenna is the collaboration between TrueRC and BARD. It is a planar bazooka dipole antenna for TBS Tracer receiver, IRC Ghost, or other 2.4 GHz systems. This end-fed dipole is designed to get the

TrueRC BARDPole 2.4GHz U.FL Antenna

This antenna is the collaboration between TrueRC and BARD. It is a planar bazooka dipole antenna for TBS Tracer receiver, IRC Ghost or other 2.4 GHz systems. This end fed dipole is designed to get the most range out of your control link by retaining an uniform radiation pattern.
Check out our RC Antennas and our range of TrueRC gear!
Specifications

Gain: 2.2dbic
Bandwidth: 2300MHz-2500MHz
Connector: U.fl
Weight: 1.3g
Size: 52mm x 7mm

Includes

1x TrueRC BARDpole 2.4GHz RC Antenna - U.FL


This antenna is the collaboration between TrueRC and BARD. It is a planar bazooka dipole antenna for TBS Tracer receiver, IRC Ghost or other 2.4 GHz systems. This end fed dipole is designed to get the most range out of your control link by retaining an uniform radiation pattern. Check out our RC Antennas and our range 

TrueRC BARDpole 2.4GHz RC Antenna - U.FL from WREKD Co.

TrueRC BARDpole 2.4GHz RC Antenna - U.FL

TRUERC

Lumenier

Lumenier Duality HD Stubby 2.4/5.8GHz Dual Band Receiver Antenna for DJI Goggles V2

LUMENIER

The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna for DJI Digital HD FPV Goggles V2. A circular polarized antenna specifically designed for the DJI FPV Drone Goggles. Duality antennas provide improved 2.4/5.8Ghz reception in a compact form factor. That's right, this antenna will work on both 2.4GHz or 5.8GHz frequencies! 
We also carry these in a 4 pack!
Check out all our DJI compatible gear all our Lumenier products!

The Lumenier Duality Antenna was created in partnership with world-renown antenna designer TrueRC to bring you the first Dual-Band aftermarket antenna designed as a direct replacement and upgrade for your stock DJI antennas found on the DJI Digital HD FPV Goggles V2.  The Duality antenna was made from the ground up to be a perfect match for the DJI goggles. Duality antennas are form fitting, low profile, color matching, direct connect RP-SMA, and all this with improved performance.
The Lumenier Duality HD Stubby, like the extremely popular AXII 2 antenna, is both Circular Polarized (LHCP or RHCP) as well as Omni-directional. On top of that, it is also 2 antennas in one being able to effectively function as both a 2.4GHz and a 5.8GHz antenna. The Lumenier Duality has been further customized to be a direct fit for the DJI HD FPV Goggles. The Duality HD Stubby comes with a custom RP-SMA connector designed to directly and securely screw onto the DJI Goggles. No adapters needed! This makes for an ultra-compact and efficient setup since you don’t need to lose any dB with extra adapters. 
The DJI FPV Drone has a linear polarization (neither LHCP nor RHCP). This means that either LHCP or RHCP will be an equal upgrade to the stock antennas on the goggles. If you also use the DJI FPV V2 Goggles with the DJI FPV Air Unit (DJI Digital FPV System), you need LHCP antennas assuming you did not swap to RHCP antennas on the Air Unit or Caddx Vista. If you purchase RHCP and use it with the stock DJI Air Unit antennas (LHCP) there will be greatly reduced signal performance. Never cross - polarize RHCP and LHCP.If using DJI V2 Goggles with only Air Units / Caddx Vista, the AXII HD Combo is a better option

Features 

Performance Like No Other

The Duality antenna offers full 360 degree coverage with near perfect circularity and up to 2.8dBic gain. Unlike the stock linear antennas the Duality Circular Polarized antennas provide consistent results no matter the orientation of the aircraft or the goggles. Additionally, these antennas have an incredible cross-polarization rejection of up to -30dB. 
All this performance means you can fly farther, and more confidently with a solid RF link.
Precision Tuning

Every Duality antenna comes from the factory having been precisely tuned by hand during assembly and QC. The unique "Fin" design on top is not there for only form but also function. These "tuning" fins allow each antenna to be individually and perfectly tuned during production. Good isn't good enough, Lumenier and TrueRC have stepped it up to the next level of precision manufacturing.
Dual-Band Antenna Technology

Designing a single band antenna of such incredible performance is hard enough, but doing this in a dual-band network is near impossible. Until now.
The Duality antenna features one of the most advanced CP Dual-Band networks available today. Not only does it have unrivaled performance but it managed to do this in an ultra-compact, 5g package. Where other antennas make sacrifices to reduce size the Duality antenna's patented design is able to keep all of the benefits while at the same time be incredibly small.
Quality Engineering with High Grade Materials

The Lumenier Duality antennas are produced with high quality, low loss materials. The material is key to a good quality antenna, and even more so when it comes to performance. This technology along with precision manufacturing results in a top of the line receiving antenna. It is designed to work with the DJI HD FPV Goggles for 2.4 and 5.8GHz, and it is capable of receiving signal up to many miles away.
The injection molded polycarbonate case of the Stubby protects the antenna elements allowing for easy, worry-free storage. 
Specifications

Gain: 1.7dBic @2.4GHz, 2.8dBic @5.8GHz
Polarization: LHCP or RHCP
Cross-Polar Rejection: -15 to -30dB, (2.2%)
Bandwidth: 2.39GHz-2.52GHz &amp 5.6GHz-6.1GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 5.25g
Dimensions: 23.3mm dia. X 22.0mm height
Connector: RP-SMA

Patented Design: US. Pat. 10,804,618 Can. Pat. 2,968,566 and other pending patents.
Design by  and manufactured by 
Includes

4x Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna LHCP


The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna for DJI Digital HD FPV Goggles V2. A circular polarized antenna specifically designed for the DJI FPV Drone Goggles. Duality antennas provide improved 2.4/5.8Ghz reception in a compact form factor. That's right, this antenna will work on both 2.4GHz or 5.8GHz 

Lumenier Duality HD Stubby 2.4/5.8GHz Dual Band Receiver Antenna for DJI Goggles V2 - LHCP

Lumenier Duality HD Stubby 2.4/5.8GHz Dual Band Receiver Antenna for D

The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna for DJI Digital HD FPV Goggles V2. A circular polarized antenna specifically designed for the DJI FPV Drone Goggles. Duality antennas provide improved 2.4/5.8Ghz reception in a compact form factor. That&#39s right, this antenna will work on both 2.4GHz or 5.8GHz frequencies! 
We also carry these in a 4 pack!
Check out all our DJI compatible gear all our Lumenier products!

The Lumenier Duality Antenna was created in partnership with world-renown antenna designer TrueRC to bring you the first Dual-Band aftermarket antenna designed as a direct replacement and upgrade for your stock DJI antennas found on the DJI Digital HD FPV Goggles V2.  The Duality antenna was made from the ground up to be a perfect match for the DJI goggles. Duality antennas are form fitting, low profile, color matching, direct connect RP-SMA, and all this with improved performance.
The Lumenier Duality HD Stubby, like the extremely popular AXII 2 antenna, is both Circular Polarized (LHCP or RHCP) as well as Omni-directional. On top of that, it is also 2 antennas in one being able to effectively function as both a 2.4GHz and a 5.8GHz antenna. The Lumenier Duality has been further customized to be a direct fit for the DJI HD FPV Goggles. The Duality HD Stubby comes with a custom RP-SMA connector designed to directly and securely screw onto the DJI Goggles. No adapters needed! This makes for an ultra-compact and efficient setup since you don’t need to lose any dB with extra adapters. 
The DJI FPV Drone has a linear polarization (neither LHCP nor RHCP). This means that either LHCP or RHCP will be an equal upgrade to the stock antennas on the goggles. If you also use the DJI FPV V2 Goggles with the DJI FPV Air Unit (DJI Digital FPV System), you need LHCP antennas assuming you did not swap to RHCP antennas on the Air Unit or Caddx Vista. If you purchase RHCP and use it with the stock DJI Air Unit antennas (LHCP) there will be greatly reduced signal performance. Never cross - polarize RHCP and LHCP.If using DJI V2 Goggles with only Air Units / Caddx Vista, the AXII HD Combo is a better option

Features 

Performance Like No Other

The Duality antenna offers full 360 degree coverage with near perfect circularity and up to 2.8dBic gain. Unlike the stock linear antennas the Duality Circular Polarized antennas provide consistent results no matter the orientation of the aircraft or the goggles. Additionally, these antennas have an incredible cross-polarization rejection of up to -30dB. 
All this performance means you can fly farther, and more confidently with a solid RF link.
Precision Tuning

Every Duality antenna comes from the factory having been precisely tuned by hand during assembly and QC. The unique &quotFin&quot design on top is not there for only form but also function. These &quottuning&quot fins allow each antenna to be individually and perfectly tuned during production. Good isn&#39t good enough, Lumenier and TrueRC have stepped it up to the next level of precision manufacturing.
Dual-Band Antenna Technology

Designing a single band antenna of such incredible performance is hard enough, but doing this in a dual-band network is near impossible. Until now.
The Duality antenna features one of the most advanced CP Dual-Band networks available today. Not only does it have unrivaled performance but it managed to do this in an ultra-compact, 5g package. Where other antennas make sacrifices to reduce size the Duality antenna&#39s patented design is able to keep all of the benefits while at the same time be incredibly small.
Quality Engineering with High Grade Materials

The Lumenier Duality antennas are produced with high quality, low loss materials. The material is key to a good quality antenna, and even more so when it comes to performance. This technology along with precision manufacturing results in a top of the line receiving antenna. It is designed to work with the DJI HD FPV Goggles for 2.4 and 5.8GHz, and it is capable of receiving signal up to many miles away.
The injection molded polycarbonate case of the Stubby protects the antenna elements allowing for easy, worry-free storage. 
Specifications

Gain: 1.7dBic @2.4GHz, 2.8dBic @5.8GHz
Polarization: LHCP or RHCP
Cross-Polar Rejection: -15 to -30dB, (2.2%)
Bandwidth: 2.39GHz-2.52GHz &ampamp 5.6GHz-6.1GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 5.25g
Dimensions: 23.3mm dia. X 22.0mm height
Connector: RP-SMA

Patented Design: US. Pat. 10,804,618 Can. Pat. 2,968,566 and other pending patents.
Design by  and manufactured by 
Includes

4x Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna LHCP


Lumenier Duality HD Stubby 2.4/5.8GHz Dual Band Receiver Antenna for DJI Goggles V2 - LHCP from WREKD Co.

The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna for DJI Digital HD FPV Goggles V2. A circular polarized antenna specifically designed for the DJI FPV Drone Goggles. Duality provides improved 2.4/5.8Ghz reception in a compact form factor.

Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna for DJI Digital HD FPV Goggles V2

The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna 4 Pack for DJI Digital HD FPV Goggles V2. A set of 4 circular polarized antennas specifically designed for the DJI FPV Drone Goggles. Duality antennas provide improved 2.4/5.8Ghz reception in a compact form factor. That&#39s right, this antenna will work on both 2.4GHz or 5.8GHz frequencies! 
We also carry these as singles!
Check out all our DJI compatible gear all our Lumenier products!

The Lumenier Duality Antenna was created in partnership with world-renown antenna designer TrueRC to bring you the first Dual-Band aftermarket antenna designed as a direct replacement and upgrade for your stock DJI antennas found on the DJI Digital HD FPV Goggles V2.  The Duality antenna was made from the ground up to be a perfect match for the DJI goggles. Duality antennas are form fitting, low profile, color matching, direct connect RP-SMA, and all this with improved performance.
The Lumenier Duality HD Stubby, like the extremely popular AXII 2 antenna, is both Circular Polarized (LHCP or RHCP) as well as Omni-directional. On top of that, it is also 2 antennas in one being able to effectively function as both a 2.4GHz and a 5.8GHz antenna. The Lumenier Duality has been further customized to be a direct fit for the DJI HD FPV Goggles. The Duality HD Stubby comes with a custom RP-SMA connector designed to directly and securely screw onto the DJI Goggles. No adapters needed! This makes for an ultra-compact and efficient setup since you don’t need to lose any dB with extra adapters. 
The DJI FPV Drone has a linear polarization (neither LHCP nor RHCP). This means that either LHCP or RHCP will be an equal upgrade to the stock antennas on the goggles. If you also use the DJI FPV V2 Goggles with the DJI FPV Air Unit (DJI Digital FPV System), you need LHCP antennas assuming you did not swap to RHCP antennas on the Air Unit or Caddx Vista. If you purchase RHCP and use it with the stock DJI Air Unit antennas (LHCP) there will be greatly reduced signal performance. Never cross - polarize RHCP and LHCP.If using DJI V2 Goggles with only Air Units / Caddx Vista, the AXII HD Combo is a better option

Features 

Performance Like No Other

The Duality antenna offers full 360 degree coverage with near perfect circularity and up to 2.8dBic gain. Unlike the stock linear antennas the Duality Circular Polarized antennas provide consistent results no matter the orientation of the aircraft or the goggles. Additionally, these antennas have an incredible cross-polarization rejection of up to -30dB. 
All this performance means you can fly farther, and more confidently with a solid RF link.
Precision Tuning

Every Duality antenna comes from the factory having been precisely tuned by hand during assembly and QC. The unique &quotFin&quot design on top is not there for only form but also function. These &quottuning&quot fins allow each antenna to be individually and perfectly tuned during production. Good isn&#39t good enough, Lumenier and TrueRC have stepped it up to the next level of precision manufacturing.
Dual-Band Antenna Technology

Designing a single band antenna of such incredible performance is hard enough, but doing this in a dual-band network is near impossible. Until now.
The Duality antenna features one of the most advanced CP Dual-Band networks available today. Not only does it have unrivaled performance but it managed to do this in an ultra-compact, 5g package. Where other antennas make sacrifices to reduce size the Duality antenna&#39s patented design is able to keep all of the benefits while at the same time be incredibly small.
Quality Engineering with High Grade Materials

The Lumenier Duality antennas are produced with high quality, low loss materials. The material is key to a good quality antenna, and even more so when it comes to performance. This technology along with precision manufacturing results in a top of the line receiving antenna. It is designed to work with the DJI HD FPV Goggles for 2.4 and 5.8GHz, and it is capable of receiving signal up to many miles away.
The injection molded polycarbonate case of the Stubby protects the antenna elements allowing for easy, worry-free storage. 
Specifications

Gain: 1.7dBic @2.4GHz, 2.8dBic @5.8GHz
Polarization: LHCP or RHCP
Cross-Polar Rejection: -15 to -30dB, (2.2%)
Bandwidth: 2.39GHz-2.52GHz &ampamp 5.6GHz-6.1GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Weight: 5.25g
Dimensions: 23.3mm dia. X 22.0mm height
Connector: RP-SMA

Patented Design: US. Pat. 10,804,618 Can. Pat. 2,968,566 and other pending patents.
Design by  and manufactured by 
Includes

4x Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna (LHCP or RHCP)


The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna 4 Pack for DJI Digital HD FPV Goggles V2. A set of 4 circular polarized antennas specifically designed for the DJI FPV Drone Goggles. Duality antennas provide improved 2.4/5.8Ghz reception in a compact form factor. That's right, this antenna will work on both 

Lumenier Duality HD Stubby 2.4/5.8GHz Dual Band Receiver Antenna 4 Pack for DJI Goggles V2 - LHCP from WREKD Co.

Lumenier Duality HD Stubby 2.4/5.8GHz Dual Band Receiver Antenna 4 Pack for DJI Goggles V2 - LHCP

The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna 4 Pack for DJI Digital HD FPV Goggles V2. A set of 4 circular polarized antennas specifically designed for the DJI FPV Drone Goggles. Duality antennas provide improved 2.4/5.8Ghz reception in a compact form factor. That's right, this antenna will work on both 2.4GHz or 5.8GHz frequencies! 
We also carry these as singles!
Check out all our DJI compatible gear all our Lumenier products!

The Lumenier Duality Antenna was created in partnership with world-renown antenna designer TrueRC to bring you the first Dual-Band aftermarket antenna designed as a direct replacement and upgrade for your stock DJI antennas found on the DJI Digital HD FPV Goggles V2.  The Duality antenna was made from the ground up to be a perfect match for the DJI goggles. Duality antennas are form fitting, low profile, color matching, direct connect RP-SMA, and all this with improved performance.
The Lumenier Duality HD Stubby, like the extremely popular AXII 2 antenna, is both Circular Polarized (LHCP or RHCP) as well as Omni-directional. On top of that, it is also 2 antennas in one being able to effectively function as both a 2.4GHz and a 5.8GHz antenna. The Lumenier Duality has been further customized to be a direct fit for the DJI HD FPV Goggles. The Duality HD Stubby comes with a custom RP-SMA connector designed to directly and securely screw onto the DJI Goggles. No adapters needed! This makes for an ultra-compact and efficient setup since you don’t need to lose any dB with extra adapters. 
The DJI FPV Drone has a linear polarization (neither LHCP nor RHCP). This means that either LHCP or RHCP will be an equal upgrade to the stock antennas on the goggles. If you also use the DJI FPV V2 Goggles with the DJI FPV Air Unit (DJI Digital FPV System), you need LHCP antennas assuming you did not swap to RHCP antennas on the Air Unit or Caddx Vista. If you purchase RHCP and use it with the stock DJI Air Unit antennas (LHCP) there will be greatly reduced signal performance. Never cross - polarize RHCP and LHCP.If using DJI V2 Goggles with only Air Units / Caddx Vista, the AXII HD Combo is a better option

Features 

Performance Like No Other

The Duality antenna offers full 360 degree coverage with near perfect circularity and up to 2.8dBic gain. Unlike the stock linear antennas the Duality Circular Polarized antennas provide consistent results no matter the orientation of the aircraft or the goggles. Additionally, these antennas have an incredible cross-polarization rejection of up to -30dB. 
All this performance means you can fly farther, and more confidently with a solid RF link.
Precision Tuning

Every Duality antenna comes from the factory having been precisely tuned by hand during assembly and QC. The unique "Fin" design on top is not there for only form but also function. These "tuning" fins allow each antenna to be individually and perfectly tuned during production. Good isn't good enough, Lumenier and TrueRC have stepped it up to the next level of precision manufacturing.
Dual-Band Antenna Technology

Designing a single band antenna of such incredible performance is hard enough, but doing this in a dual-band network is near impossible. Until now.
The Duality antenna features one of the most advanced CP Dual-Band networks available today. Not only does it have unrivaled performance but it managed to do this in an ultra-compact, 5g package. Where other antennas make sacrifices to reduce size the Duality antenna's patented design is able to keep all of the benefits while at the same time be incredibly small.
Quality Engineering with High Grade Materials

The Lumenier Duality antennas are produced with high quality, low loss materials. The material is key to a good quality antenna, and even more so when it comes to performance. This technology along with precision manufacturing results in a top of the line receiving antenna. It is designed to work with the DJI HD FPV Goggles for 2.4 and 5.8GHz, and it is capable of receiving signal up to many miles away.
The injection molded polycarbonate case of the Stubby protects the antenna elements allowing for easy, worry-free storage. 
Specifications

Gain: 1.7dBic @2.4GHz, 2.8dBic @5.8GHz
Polarization: LHCP or RHCP
Cross-Polar Rejection: -15 to -30dB, (2.2%)
Bandwidth: 2.39GHz-2.52GHz &amp 5.6GHz-6.1GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Weight: 5.25g
Dimensions: 23.3mm dia. X 22.0mm height
Connector: RP-SMA

Patented Design: US. Pat. 10,804,618 Can. Pat. 2,968,566 and other pending patents.
Design by  and manufactured by 
Includes

4x Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna (LHCP or RHCP)


The Lumenier Duality HD Stubby 2.4/5.8GHz Dual Band Receiver Antenna for DJI, available in RHCP or LHCP, is a great way to upgrade your DJI goggles! Try them today.

Lumenier Duality HD Stubby 2.4/5.8GHz Dual Band Receiver Antenna for DJI for Sale - RHCP or LHCP

Lumenier never stop! The Duality is a dual band CP omni covering both 2.4 and 5.8GHz bands in a single compact stubby package. Drop-in fit on the DJI FPV goggles V2*, letting you leaving them on at all times, thanks to a much lower profile than the stock linear antennas. Each unit is hand tuned on a professional analyz

Lumenier Duality 2.4/5.8 Stubby LHCH/RP-SMA For DJI - 4 Pack

The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna Combo for DJI Digital HD FPV Goggles V2. A circular polarized antenna specifically designed for the DJI FPV Drone Goggles. Duality provides improved 2.4/5.8Ghz reception in a compact form factor.

The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna Combo for DJI Digital HD FPV Goggles V2. A circular polarized antenna specifically designed for the DJI FPV Drone Goggles. Duality provides improved 2.4/5.8Ghz reception in a compact form fa

Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna 4x Combo for DJI Digital HD FPV Goggles V2

BayckRC

BayckRC ELRS 2.4GHz RC Mini Antenna - U.FL

Choose between white, red, and blue for the color of your ELRS antenna. Every last detail counts when it comes to styling up your quad, including your ELRS antenna!
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories, as well as all our BayckRC Products!
Specifications

Frequency or Freq. Bandwidth: 2.4GHz
Cable Length: 35mm

Connector: U.FL / IPEX-1

Includes

1x BayckRC 2.4GHz RC Mini Antenna For ELRS Receiver - Choose Color


Choose between white, red, and blue for the color of your ELRS antenna. Every last detail counts when it comes to styling up your quad, including your ELRS antenna! Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories, as well as all our BayckRC Products! Specifications Frequency

BayckRC 2.4GHz RC Mini Antenna For ELRS Receiver - U.FL - Choose Color from WREKD Co.

BayckRC 2.4GHz RC Mini Antenna For ELRS Receiver - U.FL - Choose Color

BAYCKRC

Happymodel

Happymodel Moxon 2.4GHz Antenna for ES24TX Series ELRS TX Module

A 2.4GHz antenna from Happymodel. Made for their ExpressLRS Module, but can work with any 2.4GHz SMA device.

Happymodel Moxon 2.4GHz SMA Antenna

HAPPYMODEL

The ideal antenna for your Express LRS Module! Designed specifically for the Happy Model ES24TX but will work on any module with SMA connector and 2.4GHz link.
Check out the rest of our HappyModel selection!
Specifications


Frequency or Freq. Bandwidth: 2.4GHz


Gain: 4.18dBic

Efficiency(dBi): -2.94
Efficiency(%): 50.77

Connection: SMA

Antenna Dimensions: 69x45mm


Weight: 5.8g


Includes

1x HappyModel Moxon 2.4GHz Antenna for ES24TX Series TX Module


The ideal antenna for your Express LRS Module! Designed specifically for the Happy Model ES24TX but will work on any module with SMA connector and 2.4GHz link. Check out the rest of our HappyModel selection! Specifications Frequency or Freq. Bandwidth: 2.4GHz Gain: 4.18dBic Efficiency(dBi): -2.94 Efficiency(%): 50.77 C

HappyModel Moxon 2.4GHz Antenna for ES24TX Series ELRS TX Module

HappyModel Moxon 2.4GHz Antenna for ES24TX Series ELRS TX Module from WREKD Co.

Happymodel 24RX90 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL

This antenna is a perfect replacement for the ERLS or TBS Tracer receivers. 
Check out the rest of our ELRS accessories, as well as the rest of our HappyModel selection!
Specifications


Frequency or Freq. Bandwidth: 2.4GHz


Polarization: Linear


Gain: 2.23dBic


Radiation Efficiency: 60.56%

Connection: U.FL / IPEX1

Cable Length: 90mm


Includes

1x HappyModel 24RX90 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL


This antenna is a perfect replacement for the ERLS or TBS Tracer receivers.

HappyModel 24RX90 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL

HappyModel 24RX90 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL - For Sale At RaceDayQuads

This antenna is a perfect replacement for the ERLS or TBS Tracer receivers.  Check out the rest of our ELRS accessories, as well as the rest of our HappyModel selection! Specifications Frequency or Freq. Bandwidth: 2.4GHz Polarization: Linear Gain: 2.23dBic Radiation Efficiency: 60.56% Connection: U.FL / IPEX1 Cable Le

HappyModel 24RX90 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL from WREKD Co.

Happymodel 24RX40 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL

This antenna is a perfect replacement for the ERLS or TBS Tracer receivers. 
Check out the rest of our ELRS accessories, as well as the rest of our HappyModel selection!
Specifications


Frequency or Freq. Bandwidth: 2.4GHz


Polarization: Linear


Gain: 2.23dBic


Radiation Efficiency: 60.56%

Connection: U.FL / IPEX1

Cable Length: 40mm


Includes

1x HappyModel 24RX40 2.4GHz U.FL Antenna For ELRS and TBS Tracer


HappyModel 24RX40 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL

HappyModel 24RX40 2.4GHz U.FL Antenna For ELRS and TBS Tracer - For Sale At RaceDayQuads

This antenna is a perfect replacement for the ERLS or TBS Tracer receivers.  Check out the rest of our ELRS accessories, as well as the rest of our HappyModel selection! Specifications Frequency or Freq. Bandwidth: 2.4GHz Polarization: Linear Gain: 2.23dBic Radiation Efficiency: 60.56% Connection: U.FL / IPEX1 Cable Le

HappyModel 24RX40 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL from WREKD Co.

ImmersionRC

ImmersionRC Ghost qT 2.4GHz RC Antenna for Atto Receiver


Spare antenna for the ImmersionRC Ghost Atto 2.4GHz Micro Receiver
qTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun to ensure no cable radiation, and without unexpected nulls in the radiation pattern.Tip to Tip length of just 60mm, easy to install in anything from a Whoop™ to an X-Class quad. Also comes in 150mm as well as 200mm.

Upgrade your ImmersionRC Ghost Atto 2.4GHz with the qT Antenna. Center-fed dipole design for a powerful and reliable drone experience.

ImmersionRC Ghost qT Antenna for Atto 2.4GHz Micro Receiver from WREKD Co.

ImmersionRC Ghost qT Antenna for Atto 2.4GHz Micro Receiver

These ImmersionRC qT antennas are center-fed dipoles that work well with the ImmersionRC Ghost Átto 2.4Ghz Rx.

ImmersionRC Ghost qT Antenna for Atto 2.4Ghz Receiver

TBS Tracer Immortal T 2.4GHz Linear Antenna - u.FL, 80mm

The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from lightweight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and ground. The combination of weight, durability, expected range, and performance bar none with this antenna, and it is ideal for race and freestyle mini quad use.
Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.
Specifications

Cable length: 80mm
Antenna width: 60mm
Weight: 0.84g
Gain: 2dBi
VSWR: &lt 1.4
Expected range: Full range (15mi+/25km+ with TBS Tracer)

Includes

1x TBS Tracer Immortal T 2.4GHz 80mm u.FL Linear Antenna


The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from lightweight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and ground. The combination of weight, durability, expected range, and p

TBS Tracer Immortal T 2.4GHz 80mm  u.FL Linear Antenna

TBS Tracer Immortal T 2.4GHz 80mm u.FL Linear Antenna

Axis Flying

Axis Flying ELRS 2.4GHz Receiver T Antenna

Axisflying

The&nbspAxisflying ELRS Receiver Antenna&nbspis based on the ExpressLRS project, an open-source RC link for RC applications.&nbspFeaturing a 2.4Ghz frequency, this receiver connects well with the&nbspAxisflying ELRS Receiver.

The Axisflying ELRS Receiver Antenna is based on the ExpressLRS project, an open-source RC link for RC applications. Featuring a 2.4Ghz frequency, this receiver connects well with the Axisflying ELRS Receiver.

Axisflying ELRS 2.4GHz Receiver T Antenna

TrueRC D-Pole MKII 2.4GHz RC Antenna - U.FL

The new D-pole MK II is our latest upgrade of the D-pole. New flexible, more durable elements and double-shielded feed. It can also be directly attached to carbon arms up to 12mm in width, without fear of de-tuning.

TrueRC D-Pole 2.4GHz MK II Antenna

Lumenier Duality DUAL-MOX HD 2.4/5.8GHz Dual-Band High-Gain Antenna

The Lumenier Duality DUAL-MOX HD 2.4/5.8GHz Dual-Band High-Gain Antenna four-piece bundle is for DJI Digital HD FPV Goggles V2. A directional antenna specifically designed for the DJI FPV Goggles V2.Get over double the range compared to the stock DJI antennasHigh gain antenna with a wide FOVPremium grade materials for best performance

The Lumenier Duality DUAL-MOX HD 2.4/5.8GHz Dual-Band High-Gain Antenna four-piece bundle is for DJI Digital HD FPV Goggles V2. A directional antenna specifically designed for the DJI FPV Goggles V2.

Get over double the range compared to the stock

Lumenier Duality DUAL-MOX HD 2.4/5.8GHz Dual-Band High-Gain Antenna (1pc)

The Lumenier Duality DUAL-MOX HD 2.4/5.8GHz Dual-Band High-Gain Antenna is the best upgrade for the DJI FPV Goggles V2. The DUAL-MOX is a linear directional antenna specifically designed as an upgrade for the DJI FPV Drone Goggles. Duality antennas provide improved 2.4/5.8Ghz reception in a compact form factor. That's 

Lumenier Duality DUAL-MOX HD 2.4/5.8GHz Dual-Band High-Gain Antenna Combo (4pcs)

Happymodel ELRS EP1 RX 2.4GHz Omnidirectional U.FL Antenna

Happymodel 2.4g omnidirectional antenna for ELRS - U.FL also compatible with TBS Tracer, 40mm in length. Check out our ExpressLRS Collection, all our Receivers and the rest of our Happymodel Products! Specifications: Frequency  (MHz): 2400.0 Efficiency (dBi): -0.89 Gain (dBi): 2.23 Efficiency (%):  81.46 Directivity (d

Happymodel 2.4g omnidirectional antenna for ELRS - 40mm

This Happymodel ExpressLRS (ELRS) Omnidirectional U.FL Antenna is for the EP1 RX 2.4GHz Nano series receiver. The EP1 RX has an open-source program based on ExpressLRS. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV Racing and Long Range FPV. These are very suitable for Tiny whoops because of the ultra-light and Nano size!

This Happymodel ExpressLRS (ELRS) Omnidirectional U.FL Antenna is for the EP1 RX 2.4GHz Nano series receiver. The EP1 RX has an open-source program based on ExpressLRS. Due to the low-latency and high-refresh-rate RF module, they are very comfortable

Happymodel ExpressLRS EP1 RX 2.4GHz Omnidirectional U.FL Antenna

Happymodel 2.4g omnidirectional antenna for ELRS - U.FL also compatible with TBS Tracer, 90mm in length. Check out our ExpressLRS Collection, all our Receivers and the rest of our Happymodel Products! Specifications: Frequency  (MHz): 2400.0 Efficiency (dBi): -0.89 Gain (dBi): 2.23 Efficiency (%):  81.46 Directivity (d

Happymodel 2.4g omnidirectional antenna for ELRS - 90mm

Happymodel ELRS ES24TX 2.4GHz SMA Antenna

This SMA Antenna is designed specifically for the ES24TX module by Happymodel which is based on the open-source ExpressLRS - a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285, and the SX1280 RF chip.

This SMA Antenna is designed specifically for the ES24TX module by Happymodel which is based on the open-source ExpressLRS - a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture 

Happymodel ExpressLRS ES24TX 2.4GHz SMA Antenna

TrueRC True-MoX 2.4 2.4GHz RC RP-SMA Antenna

The True-MoX 2.4 is a TrueRCs revision of the Moxon using the latest 3D electromagnetic simulation tools and RF-rated PCB material. Great for&nbspIRC Ghost&nbspor&nbspTBS Tracer.

The True-MoX 2.4 is a TrueRCs revision of the Moxon using the latest 3D electromagnetic simulation tools and RF-rated PCB material. Great for IRC Ghost or TBS Tracer.

TrueRC True-MoX 2.4GHz RP-SMA Antenna

The True-MoX 2.4 is our revision of the moxon using latest 3D electromagnetic simulation tools and RF rated PCB material. Interactions with radio or pilot’s body are kept at near zero thanks to our patent pending design. Great for IRC Ghost or TBS tracer. Note that this is not a patch, do not point the flat part toward

TrueRC TRUE-MOX 2.4  RP-SMA

VTX Antenna Connector

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.