FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

NewBeeDrone

NewBeeDrone BeeBrain Clover 5.8GHz Antenna - LHCP

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP)
The BeeBrain Clover 5.8GHz 4 leaf polarized antenna is a great alternative that helps reject‚ multipath interference, which is a common problem on standard dipole stock antennas. 
Using an RHCP or LHCP antenna is beneficial for use at races where lots of pilots are up in the air at the same time to help separate video bleed over by being on different polarization channels. Just make sure to use an RHCP/LHCP antenna on your BeeBrain and your Video Goggles at the same time to have the best signal separation as possible. 
This antenna has a U.FL connector that is plug-n-play with the BeeBrain V2 and BeeBrain Lite making it a simple swap that requires no soldering. 
 
Specifications:

Weight: approx 1.7g
Length: 50mm (connector to top of lobe) 
Polarization: LHCP or RHCP
Connector Type: U.FL (3mm)
Frequency: 5.8Ghz
Cable: Flexible RG178


NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP) The BeeBrain Clover 5.8GHz 4 leaf polarized antenna is a great alternative that helps reject‚ multipath interference, which is a common problem on standard dipole stock antennas.  Using an RHCP or LHCP antenna is beneficial for use at races where lots of pilots are up i

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP)

NewBeeDrone BeeBrain Clover 5.8GHz Antenna (LHCP) from WREKD Co.

Antenna Connector

Antennas send signals to and from your VRX/VTX and RX/TX. Many video transmitters and radio receivers come with antennas. Ensure if you need them. Or choose upgrades to increase range and penetration. Select appropriate antennas based on connector, radio frequency, and polarization (if circularly polarized). 

Antennas

Antenna Frequency

Polarization

NewBeeDrone BeeTX 5.8Ghz Antenna

Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection.Specifications:Connector Type: U.FL (3mm)Frequency: 5.8GhzLength: 62mmPackage Includes:1 Replacement Antenna

Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection.
Specifications:

Connector Type: U.FL (3mm)
Frequency: 5.8Ghz
Length: 62mm

Package Includes:

1 Replacement Antenna


Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection. Specifications: Connector Type: U.FL (3mm) Frequency: 5.8Ghz Length: 62mm Package Includes: 1 Replacement Antenna

NewBeeDrone BeeTX 5.8Ghz Antenna from WREKD Co.

Replacement antenna for the NewBeeDrone BeeTX VTX board on the BeeBrain V2.

TrueRC

TrueRC X-AIR MK II 5.8GHz Antenna & Stubby Combo for HDZero/Shark Byte - RHCP

Swap the included patch antennas from the Shark Byte digital HD FPV system with high quality X-air circular polarized directional antennas! This is the adaptation of the renowned X-AIR into a slick low profile mount for the Shark Byte RX5. Simply pop out the white panels and stick them on for an easy upgrade and a killer look. Improved beam width of 120deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out our other HD Zero and Shark Byte compatible products as well as our TrueRC selection!

Features

Direct replacement for stock patch antennas
Compact low-profile design on your goggles, easy to store and transport
High 10 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, works even out of the 5.8GHz band

Specifications
TrueRC X-AIR MK II

Bandwidth: 5.1GHz-7.0GHz
Gain: 10 dBic
Polarization: RHCP
Beam-width: 120deg
Beam-width @-3dB: 68deg
Connector: U.fl
Dimensions: 34x34x15mm
Weight: 8.8g each

TrueRC Singularity Stubby

Gain: 1.9dbic
Polarization: RHCP
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Connector: SMA
Dimensions: 12.7x20mm
Weight: 3.7g each

Includes

1x TrueRC X-AIR 5.8GHz MK II &ampamp Stubbies Combo for HDzero/SharkByte


Swap the included patch antennas from the Shark Byte digital HD FPV system with high quality X-air circular polarized directional antennas! This is the adaptation of the renowned X-AIR into a slick low profile mount for the Shark Byte RX5. Simply pop out the white panels and stick them on for an easy upgrade and a kill

TrueRC X-AIR  MK II 5.8GHz Antennas & Stubbies Combo for HDZero/SharkByte - RHCP from WREKD Co.

TrueRC X-AIR  MK II 5.8GHz Antennas & Stubbies Combo for HDZero/SharkByte - RHCP

TrueRC X-AIR MK II 5.8GHz Patch Antennas & Stubby Combo for HDzero/SharkByte - RHCP

TRUERC

Swap the included patch antennas from the Shark Byte digital HD FPV system with high quality X-air circular polarized directional antennas! This is the adaptation of the renowned X-AIR into a slick low profile mount for the Shark Byte RX5. Simply pop out the white panels and stick them on for an easy upgrade and a killer look. Improved beam width of 120deg, yield an amazing flight experience in the toughest conditions. Fill the remaining ports with a pair of included singularity stubbies and performance has never been so convenient!
Check out our other HD Zero and Shark Byte compatible products as well as our TrueRC selection!

Features

Direct replacement for stock patch antennas
Compact low-profile design on your goggles, easy to store and transport
High 10 dBic for unsurpassed long range and signal penetration
Large SWR and axial ratio bandwidth, works even out of the 5.8GHz band

Specifications
TrueRC X-AIR MK II

Bandwidth: 5.1GHz-7.0GHz
Gain: 10 dBic
Polarization: RHCP
Beam-width: 120deg
Beam-width @-3dB: 68deg
Connector: U.fl
Dimensions: 34x34x15mm
Weight: 8.8g each

TrueRC Singularity Stubby

Gain: 1.9dbic
Polarization: RHCP
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Connector: SMA
Dimensions: 12.7x20mm
Weight: 3.7g each

Includes

1x TrueRC X-AIR 5.8GHz MK II &amp Stubbies Combo for HDzero/SharkByte


The RHCP TrueRC X-AIR MK II 5.8GHz Antennas & Stubbies Combo, designed for HDZero and SharkByte, will improve your field of view and video quality. Try them today!

RHCP TrueRC X-AIR MK II 5.8GHz Antennas & Stubbies Combo for Sale - For HDzero/SharkByte

TrueRC Singularity 5.8GHz U.FL Antenna

The singularity 5.8 is our most advanced antenna. We pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made. SPECS: Gain: x.xdbic Cross-Polar Rejection: -15 to -30dB (1.9%) Bandwidth: 5.6GHz-6.0GHz Radiation Eff

TrueRC SINGULARITY 5.8 U.FL LHCP

TrueRC does it again with the Singularity series! They&#39ve come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC&#39s most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Cable: RG178
Connector: U.FL
Size: 11.8mm x 80mm (PDF)

Weight: 1.3g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz U.FL Antenna - RHCP 


TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC's most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GH

TrueRC Singularity 5.8GHz U.FL Antenna - RHCP from WREKD Co.

TrueRC Singularity 5.8GHz U.FL Antenna - RHCP

TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC's most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Cable: RG178
Connector: U.FL
Size: 11.8mm x 80mm (PDF)

Weight: 1.3g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz U.FL Antenna - RHCP 


TrueRC Singularity 5.8GHz Short U.FL Antenna

TrueRC does it again with the Singularity series! They've come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC's most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Cable: RG178
Connector: U.FL

Size: 11.8mm x 40mm (PDF)

Weight: 1.05g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz Short U.FL Antenna


TrueRC Singularity 5.8GHz Short U.FL Antenna - Choose Version

TrueRC does it again with the Singularity series! They&#39ve come up with a stronger, smaller and more sensitive antenna. The singularity 5.8 is TrueRC&#39s most advanced antenna. They pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!

Specifications

Gain: 1.9dbic

Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Cable: RG178
Connector: U.FL

Size: 11.8mm x 40mm (PDF)

Weight: 1.05g

Patent Pending
Includes

1x TrueRC Singularity 5.8GHz Short U.FL Antenna


TrueRC Singularity 5.8GHz Short U.FL Antenna - Choose Version from WREKD Co.

TrueRC SINGULARITY 5.8 U.FL (SHORT) LHCP

The singularity 5.8 is our most advanced antenna. We pushed miniaturization further than ever before, yet managed to push performances a notch higher still. It is the smallest and lightest 5.8GHz CP antenna ever made. Check out our other FPV Antennas and the rest of our TrueRC Products! Specifications: Gain: x.xdbic Cr

TrueRC SINGULARITY 5.8 U.FL (SHORT 40mm) RHCP

TrueRC D-Pole 5.8GHz U.FL Antenna - Linear

The D-pole is our work on the dipole, one of the simplest form of antenna. Extremely durable and light weight it is perfect for micro fpv. It’s wide band characteristic cover the whole 5-6Ghz band, making it equally as good for analog or digital communication.Also available with an MMCX connector.Check out our ever expanding selection of VTX antennas and our range of TrueRC gear!
Specifications


Gain: 2.5dbic
Bandwidth: 5GHz-6GHz
Weight: .88g
Size: 80mm x 25mm
Cable: Flexible RG178
Connector: U.fl

Includes

1x TrueRC D-Pole 5.8GHz U.FL Antenna - Linear


The D-pole is our work on the dipole, one of the simplest form of antenna. Extremely durable and light weight it is perfect for micro fpv. It’s wide band characteristic cover the whole 5-6Ghz band, making it equally as good for analog or digital communication.Also available with an MMCX connector.Check out our ever exp

TrueRC D-Pole 5.8GHz U.FL Antenna - Linear from WREKD Co.

TrueRC Core 5.8GHz U.FL Antenna - 85mm

Introducing the Core 5.8GHz by TrueRC, yet another amazing VTX antenna to see. This one comes with a U.FL connector for a easy pop in, and flexible 85mm length wire. Choose your configuration for your polarization between RHCP and LHCP, with nice injection molded teal top. 
The CORE 5.8 is a distillation of all those years working with drones enthusiasts and professionals alike. This omnidirectional antenna start with a refined RF design that provide excellent consistency within units and various cables configurations. TrueRC team then added a very durable outer shell that protect the antenna from the inevitable crashes. 
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing
Clear indication of polarization direction
Smooth radiation pattern with even gain in all directions
Excellent axial ratio and efficiency
Flexible coax cable option that deflect impacts
U.FL connector for a easy pop in

Specifications

Gain: 1.9dBic
Polarization: LHCP/RHCP
Cross-Polar Rejection: -10 to -20dB
Bandwidth: 5.5GHz-6.1GHz
Radiation Efficiency: 98%
SWR: &lt=1.2:1
Weight: 2.5g
Dimensions(head): 16.9mm dia. x 13.1mm height.
Length: 85mm
Cable: TrueRC RG316S/RG402/RG178 coax
Connector: U.FL

Includes

1x TrueRC Core 5.8GHz 85mm U.FL Antenna - Teal - Choose Your Polarization


Introducing the Core 5.8GHz by TrueRC, yet another amazing VTX antenna to see. This one comes with a U.FL connector for a easy pop in, and flexible 85mm length wire. Choose your configuration for your polarization between RHCP and LHCP, with nice injection molded teal top.  The CORE 5.8 is a distillation of all those y

TrueRC Core 5.8GHz 85mm U.FL Antenna - Teal - Choose Your Polarization

Introducing the Core 5.8GHz by TrueRC, yet another amazing VTX antenna to see. This one comes with a U.FL connector for a easy pop in, flexible 85mm wire, and a nice injection molded grey top. 
The CORE 5.8 is a distillation of all those years working with drones enthusiasts and professionals alike. This omnidirectional antenna start with a refined RF design that provide excellent consistency within units and various cables configurations. TrueRC team then added a very durable outer shell that protect the antenna from the inevitable crashes. 
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing
Clear indication of polarization direction
Smooth radiation pattern with even gain in all directions
Excellent axial ratio and efficiency
Flexible coax cable option that deflect impacts
U.FL connector for a easy pop in

Specifications

Gain: 1.9dBic
Polarization: LHCP/RHCP
Cross-Polar Rejection: -10 to -20dB
Bandwidth: 5.5GHz-6.1GHz
Radiation Efficiency: 98%
SWR: &lt=1.2:1
Weight: 2.5g
Dimensions(head): 16.9mm dia. x 13.1mm height.
Length: 85mm
Cable: TrueRC RG316S/RG402/RG178 coax
Connector: U.FL

Includes

1x TrueRC Core 5.8GHz 85mm U.FL Antenna - Grey - Choose Version


Introducing the Core 5.8GHz by TrueRC, yet another amazing VTX antenna to see. This one comes with a U.FL connector for a easy pop in, flexible 85mm wire, and a nice injection molded grey top.  The CORE 5.8 is a distillation of all those years working with drones enthusiasts and professionals alike. This omnidirectiona

TrueRC Core 5.8GHz 85mm U.FL Antenna - Grey - Choose Version

Introducing the Core 5.8GHz by TrueRC, yet another amazing VTX antenna to see. This one comes with a U.FL connector for a easy pop in, flexible 85mm wire, and a nice injection molded grey top. 
The CORE 5.8 is a distillation of all those years working with drones enthusiasts and professionals alike. This omnidirectional antenna start with a refined RF design that provide excellent consistency within units and various cables configurations. TrueRC team then added a very durable outer shell that protect the antenna from the inevitable crashes. 
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing
Clear indication of polarization direction
Smooth radiation pattern with even gain in all directions
Excellent axial ratio and efficiency
Flexible coax cable option that deflect impacts
U.FL connector for a easy pop in

Specifications

Gain: 1.9dBic
Polarization: LHCP/RHCP
Cross-Polar Rejection: -10 to -20dB
Bandwidth: 5.5GHz-6.1GHz
Radiation Efficiency: 98%
SWR: &amplt=1.2:1
Weight: 2.5g
Dimensions(head): 16.9mm dia. x 13.1mm height.
Length: 85mm
Cable: TrueRC RG316S/RG402/RG178 coax
Connector: U.FL

Includes

1x TrueRC Core 5.8GHz 85mm U.FL Antenna - Grey - Choose Version


TrueRC Core 5.8GHz 85mm U.FL Antenna - Grey - Choose Version from WREKD Co.

Introducing the Core 5.8GHz by TrueRC, yet another amazing VTX antenna to see. This one comes with a U.FL connector for a easy pop in, and flexible 85mm length wire. Choose your configuration for your polarization between RHCP and LHCP, with nice injection molded teal top. 
The CORE 5.8 is a distillation of all those years working with drones enthusiasts and professionals alike. This omnidirectional antenna start with a refined RF design that provide excellent consistency within units and various cables configurations. TrueRC team then added a very durable outer shell that protect the antenna from the inevitable crashes. 
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing
Clear indication of polarization direction
Smooth radiation pattern with even gain in all directions
Excellent axial ratio and efficiency
Flexible coax cable option that deflect impacts
U.FL connector for a easy pop in

Specifications

Gain: 1.9dBic
Polarization: LHCP/RHCP
Cross-Polar Rejection: -10 to -20dB
Bandwidth: 5.5GHz-6.1GHz
Radiation Efficiency: 98%
SWR: &amplt=1.2:1
Weight: 2.5g
Dimensions(head): 16.9mm dia. x 13.1mm height.
Length: 85mm
Cable: TrueRC RG316S/RG402/RG178 coax
Connector: U.FL

Includes

1x TrueRC Core 5.8GHz 85mm U.FL Antenna - Teal - Choose Your Polarization


TrueRC Core 5.8GHz 85mm U.FL Antenna - Teal - Choose Your Polarization from WREKD Co.

TrueRC Core 5.8GHz Side Feed U.FL Antenna - RHCP, 85mm

This TrueRC Core 5.8GHz U.FL antenna has an 85mm side feed and features right-hand circular polarization (RHCP). Its performance is optimized for high-frequency FPV radio systems, providing an impressive axial ratio of &amplt1.2. This product promises effective signal reception and reliable connection over long distance.
The CORE 5.8 is a distillation of all those years working with drone enthusiasts and professionals alike. This omnidirectional antenna starts with a refined RF design that provides excellent consistency within units and various cable configurations. TrueRC team then added a very durable outer shell that protects the antenna from inevitable crashes. 
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing

Clear indication of polarization direction

Smooth radiation pattern with even gain in all directions

Excellent axial ratio and efficiency

Side exit cable for novel mounting options

Exclusive knurled True-SMA for easy tightening

Specifications

Gain: 1.9dbic

Polarization: RHCP

Cross-Polar Rejection: -10 to -20dB (1.9%)

Bandwidth: 5.5Hz-6.1GHz

Radiation Efficiency: 98%

SWR: &amplt=1.2:1

Dimensions(head): 16.9mm dia. x 13.1mm height.

Weight: 2.3grams

Length: 85mm

Connector: UFL

Includes

TrueRC Core 5.8GHz 85mm Side Feed U.FL Antenna - Grey - RHCP


This TrueRC Core 5.8GHz U.FL antenna has an 85mm side feed and features right-hand circular polarization (RHCP). Its performance is optimized for high-frequency FPV radio systems, providing an impressive axial ratio of &lt;1.2. This product promises effective signal reception and reliable connection over long distance.

TrueRC Core 5.8GHz 85mm Side Feed U.FL Antenna - Grey - RHCP from WREKD Co.

TrueRC Core 5.8GHz 85mm Side Feed U.FL Antenna - Grey - RHCP

This TrueRC Core 5.8GHz U.FL antenna has an 85mm side feed and features right-hand circular polarization (RHCP). Its performance is optimized for high-frequency FPV radio systems, providing an impressive axial ratio of &lt1.2. This product promises effective signal reception and reliable connection over long distance.
The CORE 5.8 is a distillation of all those years working with drone enthusiasts and professionals alike. This omnidirectional antenna starts with a refined RF design that provides excellent consistency within units and various cable configurations. TrueRC team then added a very durable outer shell that protects the antenna from inevitable crashes. 
Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing

Clear indication of polarization direction

Smooth radiation pattern with even gain in all directions

Excellent axial ratio and efficiency

Side exit cable for novel mounting options

Exclusive knurled True-SMA for easy tightening

Specifications

Gain: 1.9dbic

Polarization: RHCP

Cross-Polar Rejection: -10 to -20dB (1.9%)

Bandwidth: 5.5Hz-6.1GHz

Radiation Efficiency: 98%

SWR: &lt=1.2:1

Dimensions(head): 16.9mm dia. x 13.1mm height.

Weight: 2.3grams

Length: 85mm

Connector: UFL

Includes

TrueRC Core 5.8GHz 85mm Side Feed U.FL Antenna - Grey - RHCP


VAS (Video Aerial Systems)

VAS Walksnail VRX Crosshair XTreme Mini Mod - U.FL

When looking at the performance of today's HD Video systems, it was clear that something was lacking. The lack of integrated antenna upgrades specifically for the Walksnail HD Video Receiver system lets a great VRX down. First we decided to come up with a 3D model that could be printed and house our Crosshair Xtreme antennas but that resulted in a much too large cover, that didn't really look like it belonged. Then after much thought and discussion, we decided a single piece injection molded solution was needed. The result, the Walksnail VRX Crosshair™ Xtreme Mini Mod, a direct bolt on replacement of the front two stock patch antennas. Outfitted with 2 Crosshair™ Xtreme Minis, this mod is a great upgrade for both racers and freestyle pilots looking to push their flying to longer ranges or around objects that normally cause too much signal degradation. 
Check out all our FPV Receivers &amp Antennas and our selection of VAS products!


Specifications

Gain: 10dbic

Axial ratio: 0.99 (measured)

Bandwidth: 5300Mhz-6400MHz

Flight beam: 120 degrees

-3db point: +/- 30 degrees

Connector: u.fl x2

Includes

1x VAS Walksnail VRX Crosshair XTreme Mini Mod - Choose Polarization


When looking at the performance of today's HD Video systems, it was clear that something was lacking. The lack of integrated antenna upgrades specifically for the Walksnail HD Video Receiver system lets a great VRX down. First we decided to come up with a 3D model that could be printed and house our Crosshair Xtreme an

VAS Walksnail VRX Crosshair XTreme Mini Mod - Choose Polarization

Video Aerial Systems (VAS)

When looking at the performance of today&#39s HD Video systems, it was clear that something was lacking. The lack of integrated antenna upgrades specifically for the Walksnail HD Video Receiver system lets a great VRX down. First we decided to come up with a 3D model that could be printed and house our Crosshair Xtreme antennas but that resulted in a much too large cover, that didn&#39t really look like it belonged. Then after much thought and discussion, we decided a single piece injection molded solution was needed. The result, the Walksnail VRX Crosshair™ Xtreme Mini Mod, a direct bolt on replacement of the front two stock patch antennas. Outfitted with 2 Crosshair™ Xtreme Minis, this mod is a great upgrade for both racers and freestyle pilots looking to push their flying to longer ranges or around objects that normally cause too much signal degradation. 
Check out all our FPV Receivers &ampamp Antennas and our selection of VAS products!


Specifications

Gain: 10dbic

Axial ratio: 0.99 (measured)

Bandwidth: 5300Mhz-6400MHz

Flight beam: 120 degrees

-3db point: +/- 30 degrees

Connector: u.fl x2

Includes

1x VAS Walksnail VRX Crosshair XTreme Mini Mod - Choose Polarization


VAS Walksnail VRX Crosshair XTreme Mini Mod - Choose Polarization from WREKD Co.

VAS Micro Switchblade 5.8GHz U.FL Antenna - RHCP

The Micro Switchblade gives your micro sized aircraft top notch performance, yet weighs only 1 gram.  Don’t let the small size fool you, the Micro switchblade boasts an incredible 2.25dbic gain and 0.92 axial ratio making it perfect for freestyle and backyard bashing. Based on the proven Patent Pending technology of the Ion, the Micro Switchblade is the lightest truly Circularly polarized antenna on the market.
Check out all our VTX antennas, and all our VAS gear!
Features

Lightest truly Circularly polarized antenna

Specifications


Gain: 2.25dbic

Axial Ratio: 0.92
Weight: 1 gram



Includes

1x VAS Micro Switchblade 5.8GHz U.FL Antenna - RHCP


The Micro Switchblade gives your micro sized aircraft top notch performance, yet weighs only 1 gram.  Don’t let the small size fool you, the Micro switchblade boasts an incredible 2.25dbic gain and 0.92 axial ratio making it perfect for freestyle and backyard bashing. Based on the proven Patent Pending technology of th

Micro Switchblade RHCP by IBCrazy

VAS Micro Switchblade 5.8GHz U.FL Antenna - RHCP from WREKD Co.

TrueRC BLAZE 5.8GHz U.FL Antenna for Caddx Vista - LHCP

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 3g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 45mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP 
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum. Check out the rest of our VTX Antennas, and our range of TrueRC gear! 

TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP - Choose Your Color from WREKD Co.

TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP - Choose Your Color

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 3g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 45mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP 
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - LHCP - Choose Your C

The Blaze 5.8GHz features TrueRC's latest high-fidelity-circular-polarized-antenna-design plus the CREE™ XQ-E high-intensity LED!

TrueRC Blaze 5.8GHz Antenna

TrueRC BLAZE 5.8GHz U.FL Antenna - RHCP, Regular (45mm) 

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: RHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 3g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 45mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - RHCP 
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - RHCP - Choose Your Color from WREKD Co.

TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - RHCP - Choose Your Color

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: RHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 3g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 45mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - RHCP 
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Regular (45mm) U.FL Antenna - RHCP - Choose Your C

TrueRC BLAZE 5.8GHz U.FL Antenna - LHCP, Long (110mm)

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &amplt=1.2:1
Weight: 4g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 110mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP - Choose Your Color from WREKD Co.

TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP - Choose Your Color

The TrueRC BLAZE 5.8GHz is no ordinary antenna. It is a high performance CP omni doubling as a powerful LED light. Thanks to an advanced RF design and heat management, this antenna possibly outshines anything in both the 5.8GHz and visible spectrum.
Check out the rest of our VTX Antennas, and our range of TrueRC gear! 
Features

Durable poly-carbonate, Injection Molded, ultra-sonically welded Housing.
CREE™ XQ-E high intensity LED.
Wider Bandwidth (5.4-6.3GHz).
Pattern stays true even in harsh/sub-optimal installations.
Single wire 5V LED power hookup with micro connector.
Available in red, green, blue and white.
Available with U.FL





Specifications

Gain: 1.9dBic
Polarization: LHCP
Cross-Polar Rejection: -15 to -30dB, (1.9%)
Bandwidth: 5.4GHz-6.3GHz
Radiation Efficiency: 99%
SWR: &lt=1.2:1
Weight: 4g 
Dimensions(head): 16.5mm dia. X 10.7mm height.
Length: 110mm
Cable: Heavy-duty semi-rigid RG402 coax or custom RG316S.
Connector: U.FL
Current draw: 100-110mA with included resistor.
Max current: 400mA.
Supply voltage: 5V with included resistor.
Approx luminous flux @100mA: 20 to 50 Lumen depending on color.

Includes

1x TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP
1x 12 or 18ohms resistor depending on color
1x Micro power connector
1x Heat shrink


TrueRC BLAZE 5.8GHz Long (110mm) U.FL Antenna - LHCP - Choose Your Col

TrueRC BARDpole 2.4GHz U.FL Antenna

This antenna is the collaboration between TrueRC and BARD. It is a planar bazooka dipole antenna for TBS Tracer receiver, IRC Ghost or other 2.4 GHz systems. This end fed dipole is designed to get the most range out of your control link by retaining an uniform radiation pattern.
Check out our RC Antennas and our range of TrueRC gear!
Specifications

Gain: 2.2dbic
Bandwidth: 2300MHz-2500MHz
Connector: U.fl
Weight: 1.3g
Size: 52mm x 7mm

Includes

1x TrueRC BARDpole 2.4GHz RC Antenna - U.FL


This antenna is the collaboration between TrueRC and BARD. It is a planar bazooka dipole antenna for TBS Tracer receiver, IRC Ghost or other 2.4 GHz systems. This end fed dipole is designed to get the most range out of your control link by retaining an uniform radiation pattern. Check out our RC Antennas and our range 

TrueRC BARDpole 2.4GHz RC Antenna - U.FL

TrueRC BARDpole 2.4GHz RC Antenna - U.FL from WREKD Co.

Introducing the TrueRC BARDpole 2.4 GHz Antenna! This antenna is the collaboration between TrueRC and BARD. It is a planar bazooka dipole antenna for TBS Tracer receiver, IRC Ghost, or other 2.4 GHz systems. This end-fed dipole is designed to get the most range out of your control link by retaining a uniform radiation pattern.

Introducing the TrueRC BARDpole 2.4 GHz Antenna! This antenna is the collaboration between TrueRC and BARD. It is a planar bazooka dipole antenna for TBS Tracer receiver, IRC Ghost, or other 2.4 GHz systems. This end-fed dipole is designed to get the

TrueRC BARDPole 2.4GHz U.FL Antenna

BetaFPV

BetaFPV T Dipole 2.4GHz RC Antenna - U.FL

BETAFPV

The dipole T antenna is designed and manufactured by BETAFPV for a 2.4G/915MHz/868MHz receiver. This antenna is omnidirectional. RF balun circuit comes with this dipole antenna, just inside the injected rubber enclosure. Every piece of the antenna is tested with the frequency spectrograph to make sure it works in the correct status.
A ton of ExpressLRS items are available now!

Specification

Coaxial cable length: 46mm/80mm

Antenna width: 60mm
Weight: 0.94g
Connector: IPEX MHF
Gain: 2dBi
VSWR: &lt1.4 (2.4G version) / &lt1.6 (915MHz/868MHz version)

Which antenna should I choose?  Are these antennas compatible with other receivers like Frsky or TBS receivers?
First, it is compatible with any receiver with an IPEX MHF connector. Note that do NOT use the antenna with the wrong frequency. Even they look almost the same outside, but different balun circuit inside. It will have totally different performance in the wrong frequency point. Second, the shorter 915MHz/868MHz antenna is just made for small whoop drones. If you expect full-range performance, highly recommend the longer version.

The BETAFPV dipole T antenna is omnidirectional. Below is the antenna 3D radiation pattern image.

RF Antenna Balun
What is a Balun and why should we use it in these dipole T antennas? In order for these balanced antennas to be fed by coaxial cable, an antenna balun is often included at the feed point. For more details, please check this article "What is a Balun: RF Antenna Balun".

For the dipole T antenna, the balun circuit is in the injected rubber enclosure. For the different antennas, there is a related balun circuit.


Package

2 * BETAFPV T antenna


The dipole T antenna is designed and manufactured by BETAFPV for a 2.4G/915MHz/868MHz receiver. This antenna is omnidirectional. RF balun circuit comes with this dipole antenna, just inside the injected rubber enclosure. Every piece of the antenna is tested with the frequency spectrograph to make sure it works in the c

BETAFPV Dipole T Antenna

Designed and manufactured by BETA FPV for any 2.4GHz receiver with IPEX 1 / U.FL connector, this omnidirectional antenna includes an RF balun circuit integrated inside the injected rubber enclosure. Every antenna is tested with a frequency spectrograph to ensure a perfect tune!
Check out our RC Antennas and all our BetaFPV products!

Specifications

Coaxial Cable Length: 80mm or 46mm

Antenna Width: 60mm
Gain: 2dBi

VSWR: &lt1.4
Connector: IPEX MHF (IPEX 1 / U.FL)
Weight: 0.94g 

Includes

2x BetaFPV T Dipole 2.4GHz RC Antenna


Designed and manufactured by BETA FPV for any 2.4GHz receiver with IPEX 1 / U.FL connector, this omnidirectional antenna includes an RF balun circuit integrated inside the injected rubber enclosure. Every antenna is tested with a frequency spectrograph to ensure a perfect tune! Check out our RC Antennas and all our Bet

BetaFPV T Dipole 2.4GHz RC Antenna 2 Pack - Choose Length

Designed and manufactured by BETA FPV for any 2.4GHz receiver with IPEX 1 / U.FL connector, this omnidirectional antenna includes an RF balun circuit integrated inside the injected rubber enclosure. Every antenna is tested with a frequency spectrograph to ensure a perfect tune!
Check out our RC Antennas and all our BetaFPV products!

Specifications

Coaxial Cable Length: 80mm or 46mm

Antenna Width: 60mm
Gain: 2dBi

VSWR: &amplt1.4
Connector: IPEX MHF (IPEX 1 / U.FL)
Weight: 0.94g 

Includes

2x BetaFPV T Dipole 2.4GHz RC Antenna


BetaFPV T Dipole 2.4GHz RC Antenna 2 Pack - Choose Length from WREKD Co.

HGLRC

HGLRC Mini Hammer 5.8GHz U.FL Antenna - RHCP

A mini antenna with a 2.5dbi gain punch!
Check out all our VTX Antennas and our collection of HGLRC products!
Specifications

Frequency range(MHz): 5500-6000
Polarization: RHCP
Gain(dBi): 2.5db
Input Impedance(Ω) :50
VSWR(5800MHZ): ≤1.5
Maximum input power(W): 50
Input connector type:  U.FL
Radome material: ABS
Radome color: Black
Size: 87mm
Weight: 2g

Includes

1x HGLRC Mini Hammer 5.8GHz U.FL Antenna - RHCP


A mini antenna with a 2.5dbi gain punch! Check out all our VTX Antennas and our collection of HGLRC products! Specifications Frequency range(MHz): 5500-6000 Polarization: RHCP Gain(dBi): 2.5db Input Impedance(Ω) :50 VSWR(5800MHZ): ≤1.5 Maximum input power(W): 50 Input connector type:  U.FL Radome material: ABS Radome c

HGLRC Mini Hammer 5.8GHz U.FL Antenna - RHCP from WREKD Co.

Foxeer

Foxeer Micro Lollipop 5.8GHz U.FL Antenna - RHCP

Foxeer FPV antennas are known for their great performance and price, with these new micro Lollipop antennas they are bringing that same performance to the micro world like Toothpick and Ultralite builds. But that does not mean they still can't be used in bigger rigs!Checkout all our FPV antennas and our Foxeer collecti

Foxeer Micro Lollipop FPV Antenna 5.8G 2.5dBi High Gain - u.Fl - RHCP

Foxeer FPV antennas are known for their great performance and price, with these new micro Lollipop antennas they are bringing that same performance to the micro world like Toothpick and Ultralite builds. But that does not mean they still can&#39t be used in bigger rigs!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features

Smaller, Lighter but stronger
Durable structure
Available in 4 different colors
Ultra Lightweight

Specifications

Center Frequency: 5.7GHz
Gain: 2.5dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.06 at Center Frequency
Connector: u.Fl
Dimension: 11*65mm
Cable Length: 51mm
Polarization: RHCP/LHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 1.6 Grams (u.Fl connector)

Includes

2x Foxeer Micro Lollipop 5.8GHz U.FL Antenna


Foxeer FPV antennas are known for their great performance and price, with these new micro Lollipop antennas they are bringing that same performance to the micro world like Toothpick and Ultralite builds. But that does not mean they still can't be used in bigger rigs! Check out the rest of our VTX Antennas and our selec

Foxeer Micro Lollipop 5.8GHz U.FL Antenna 2 Pack - RHCP - Choose Your Color from WREKD Co.

Foxeer Micro Lollipop 5.8GHz U.FL Antenna 2 Pack - RHCP - Choose Your Color

FOXEER

Foxeer FPV antennas are known for their great performance and price, with these new micro Lollipop antennas they are bringing that same performance to the micro world like Toothpick and Ultralite builds. But that does not mean they still can't be used in bigger rigs!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features

Smaller, Lighter but stronger
Durable structure
Available in 4 different colors
Ultra Lightweight

Specifications

Center Frequency: 5.7GHz
Gain: 2.5dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.06 at Center Frequency
Connector: u.Fl
Dimension: 11*65mm
Cable Length: 51mm
Polarization: RHCP/LHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 1.6 Grams (u.Fl connector)

Includes

2x Foxeer Micro Lollipop 5.8GHz U.FL Antenna


Foxeer Micro Lollipop 5.8GHz U.FL Antenna 2 Pack - RHCP - Choose Your 

Foxeer Lollipop V4 5.8GHz U.FL Antenna

 This is the 4th generation of your all time favorite Foxeer Lollipop antennas.This latest version is even more durable thanks to its new stronger structure and uses gold plating technology that provides better signal. Check out all our Foxeer Lollipop 4 Collection, our FPV Antennas and the rest of our Foxeer Products!

Foxeer 5.8G Lollipop 4 2.6dBi Omni Antenna 2pcs - UFL 165mm RHCP (Choose Color)

Foxeer 5.8G Lollipop 4 2.6dBi Omni Antenna 2pcs - UFL 85mm LHCP (Choose Color)

The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials 


Specifications

Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: LHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: &lt 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: Φ11*85mm(short), Φ11*150mm(long)

Connection: UFL

Weight: 4.8g(short), 6.8g(long)

Includes

2x Foxeer Lollipop V4 5.8GHz U.FL Antenna w/Tube 2 Pack LHCP


The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection! Features Durable Structure Higher gain than previous versions High Quality Oxidation Resistant Material

Foxeer Lollipop V4 5.8GHz U.FL Antenna w/Tube 2 Pack LHCP

 This is the 4th generation of your all time favorite Foxeer Lollipop antennas.This latest version is even more durable thanks to its new stronger structure and uses gold plating technology that provides better signal. Check out all our FPV Antennas and the rest of our Foxeer Products! Specifications: Center Frquency: 

Foxeer 5.8G Lollipop 4 2.6dBi Omni Antenna 2pcs - U.FL RHCP (Choose Color)

The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials 


Specifications

Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: RHCP and LHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: &amplt 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: Φ11*85mm(short), Φ11*150mm(long)

Connection: UFL

Weight: 4.8g(short), 6.8g(long)

Includes

2x Foxeer Lollipop V4 5.8GHz UFL Antenna 2 Pack


Foxeer Lollipop V4 5.8GHz UFL Antenna 2 Pack - Choose Version from WREKD Co.

Foxeer Lollipop V4 5.8GHz UFL Antenna 2 Pack - Choose Version

The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials 


Specifications

Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: RHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: &lt 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: Φ11*85mm(short), Φ11*150mm(long)

Connection: UFL

Weight: 4.8g(short), 6.8g(long)

Includes

2x Foxeer Lollipop V4 5.8GHz U.FL Antenna w/Tube 2 Pack RHCP


Foxeer Lollipop V4 5.8GHz U.FL Antenna w/Tube 2 Pack RHCP

The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials 


Specifications

Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: LHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: &amplt 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: Φ11*85mm(short), Φ11*150mm(long)

Connection: UFL

Weight: 4.8g(short), 6.8g(long)

Includes

2x Foxeer Lollipop V4 5.8GHz U.FL Antenna w/Tube 2 Pack LHCP


Foxeer Lollipop V4 5.8GHz U.FL Antenna w/Tube 2 Pack LHCP from WREKD Co.

The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials 


Specifications

Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: RHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: &amplt 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: Φ11*85mm(short), Φ11*150mm(long)

Connection: UFL

Weight: 4.8g(short), 6.8g(long)

Includes

2x Foxeer Lollipop V4 5.8GHz U.FL Antenna w/Tube 2 Pack RHCP


Foxeer Lollipop V4 5.8GHz U.FL Antenna w/Tube 2 Pack RHCP from WREKD Co.

The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials 


Specifications

Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: RHCP and LHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: &lt 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: Φ11*85mm(short), Φ11*150mm(long)

Connection: UFL

Weight: 4.8g(short), 6.8g(long)

Includes

2x Foxeer Lollipop V4 5.8GHz UFL Antenna 2 Pack


Foxeer 5.8G Lollipop 4 2.6dBi Omni Antenna 2pcs - UFL 95mm RHCP (Choose Color)

Foxeer 5.8G Lollipop 4 2.6dBi Omni Antenna 2pcs - UFL 165mm LHCP (Chosen Color)

Foxeer 5.8G Lollipop 4 2.6dBi Omni Antenna 2pcs - UFL 95mm LHCP (Chosen Color)

Lumenier

Lumenier Micro AXII 2 5.8GHz Antenna - U.FL

When the original Lumenier Micro AXII Antenna was released it set a new standard for micro sized FPV antennas with incredible performance in a tiny package. The Micro AXII 2 improves upon the original design and pushes the boundaries even further!

Lumenier Micro AXII 2 Antenna 5.8GHz - U.FL

The Lumenier Micro AXII 2 5.8GHz Antenna is the new generation of the world&#39s most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full-size AXII antennas but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the smallest, lightest, and best-performing FPV antennas in the world. The Micro AXII 2 antenna improves on the original Micro AXII antenna and features a new RF pathway technology (unique hybrid network) improving performance while still being incredibly small and lightweight. Even though the Micro AXII 2 is both small and lightweight, it does not sacrifice performance. In fact, it outperforms most other antennas in all categories. Precision engineering has given this antenna a near-perfect Cross-Polar Rejection resulting in a true circularity. This means an RHCP Micro AXII antenna rejects nearly 100% of LHCP signals, giving you a crystal clear image free of multi-pathing noise. On top of that, the Micro AXII 2 has a best-in-class max gain of 1.9dBic enabling better range and penetration. It has a wide bandwidth covering the popular FPV 5GHz band from 5.5GHz-6.0GHz, ensuring you have a clear and strong signal no matter which frequency you&#39re on.The Micro AXII is designed to be extremely durable and put up with the beatings FPV pilots put on their antennas. The entire antenna array is securely protected inside the injection-molded outer casing. The outer shell case is made from an impact-resistant polycarbonate material, and it is ultra-sonically sealed shut to guard the antenna elements inside.
When the original Lumenier Micro AXII Antenna was released it set a new standard for micro-sized FPV antennas with incredible performance in a tiny package. The Micro AXII 2 improves upon the original design and pushes the boundaries even further!
Check out all our 5.8GHz VTX antennas all our Lumenier products!
Features

Ultra-durable injection molded case
Better Cross-Polar Rejection
Higher Gain for longer range
New and improved look
Improved efficiency

Specifications

Weight: 1.03g to 2.8g depending on configuration
Cross-Polar Rejection: -15 to -30dB (1.9%)
Polarization: RHCP or LHCP versions
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
Cable Length: 

Regular: 65mm
Short: 20mm


Connector: U.FL
Gain: 1.9dBic
SWR: &amplt=1.5:1

Includes

1x Lumenier Micro 2 AXII U.FL 5.8GHz Antenna

 

The Lumenier Micro AXII 2 5.8GHz Antenna is the new generation of the world's most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full-size AXII antennas but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the

Lumenier Micro AXII 2 5.8GHz U.FL Antenna - Choose Polarization & Length from WREKD Co.

Lumenier Micro AXII 2 5.8GHz U.FL Antenna - Choose Polarization & Length

The Lumenier Micro AXII 2 5.8GHz Antenna is the new generation of the world's most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full size AXII antennas, but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you th

Lumenier Micro AXII 2 5.8GHz Antenna Regular UFL - LHCP

Lumenier Micro AXII 2 5.8GHz Antenna Short UFL - LHCP

LUMENIER

The Lumenier Micro AXII 2 5.8GHz Antenna is the new generation of the world's most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full-size AXII antennas but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the smallest, lightest, and best-performing FPV antennas in the world. The Micro AXII 2 antenna improves on the original Micro AXII antenna and features a new RF pathway technology (unique hybrid network) improving performance while still being incredibly small and lightweight. Even though the Micro AXII 2 is both small and lightweight, it does not sacrifice performance. In fact, it outperforms most other antennas in all categories. Precision engineering has given this antenna a near-perfect Cross-Polar Rejection resulting in a true circularity. This means an RHCP Micro AXII antenna rejects nearly 100% of LHCP signals, giving you a crystal clear image free of multi-pathing noise. On top of that, the Micro AXII 2 has a best-in-class max gain of 1.9dBic enabling better range and penetration. It has a wide bandwidth covering the popular FPV 5GHz band from 5.5GHz-6.0GHz, ensuring you have a clear and strong signal no matter which frequency you're on.The Micro AXII is designed to be extremely durable and put up with the beatings FPV pilots put on their antennas. The entire antenna array is securely protected inside the injection-molded outer casing. The outer shell case is made from an impact-resistant polycarbonate material, and it is ultra-sonically sealed shut to guard the antenna elements inside.
When the original Lumenier Micro AXII Antenna was released it set a new standard for micro-sized FPV antennas with incredible performance in a tiny package. The Micro AXII 2 improves upon the original design and pushes the boundaries even further!
Check out all our 5.8GHz VTX antennas all our Lumenier products!
Features

Ultra-durable injection molded case
Better Cross-Polar Rejection
Higher Gain for longer range
New and improved look
Improved efficiency

Specifications

Weight: 1.03g to 2.8g depending on configuration
Cross-Polar Rejection: -15 to -30dB (1.9%)
Polarization: RHCP or LHCP versions
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
Cable Length: 

Regular: 65mm
Short: 20mm


Connector: U.FL
Gain: 1.9dBic
SWR: &lt=1.5:1

Includes

1x Lumenier Micro 2 AXII U.FL 5.8GHz Antenna

 

Lumenier Micro AXII 2 5.8GHz U.FL Antenna - Choose Polarization & Leng

Lumenier Micro AXII 2 5.8GHz Antenna Regular UFL - RHCP

Lumenier Micro AXII 2 5.8GHz Antenna Short UFL - RHCP

Lumenier Micro AXII 2 5.8GHz Antenna - U.FL Lite

The Lumenier Micro AXII 2 5.8GHz Antenna is the new generation of the world's most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full-size AXII antennas but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the smallest, lightest, and best-performing FPV antennas in the world. The Micro AXII 2 antenna improves on the original Micro AXII antenna and features a new RF pathway technology (unique hybrid network) improving performance while still being incredibly small and lightweight. 
Even though the Micro AXII 2 is both small and lightweight, it does not sacrifice performance. In fact, it outperforms most other antennas in all categories. Precision engineering has given this antenna a near-perfect Cross-Polar Rejection resulting in a true circularity. This means an RHCP Micro AXII antenna rejects nearly 100% of LHCP signals, giving you a crystal clear image free of multi-pathing noise. On top of that, the Micro AXII 2 has a best-in-class max gain of 1.9dBic enabling better range and penetration. It has a wide bandwidth covering the popular FPV 5GHz band from 5.5GHz-6.0GHz, ensuring you have a clear and strong signal no matter which frequency you're on.
The Micro AXII is designed to be extremely durable and put up with the beatings FPV pilots put on their antennas. The entire antenna array is securely protected inside the injection-molded outer casing. The outer shell case is made from an impact-resistant polycarbonate material, and it is ultra-sonically sealed shut to guard the antenna elements inside. 
Check out all our 5.8GHz VTX antennas and all our Lumenier products!

V2 Improvements
When the original Lumenier Micro AXII Antenna was released it set a new standard for micro-sized FPV antennas with incredible performance in a tiny package. The Micro AXII 2 improves upon the original design and pushes the boundaries even further!

Ultra-durable injection molded case
Better Cross-Polar Rejection
Higher Gain for longer range
New and improved look
Improved efficiency

Specifications

Weight: 1.4g 
Cross-Polar Rejection: -15 to -30dB (1.9%)
Polarization: RHCP
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
Connector: U.FL (locking connector)
Cable Length: 30mm
Gain: 1.9dBic
SWR: &lt=1.5:1

Polarization
The Micro AXII 2 antenna comes in either RHCP configuration.

Right Hand Circular (RHCP)

Includes

1x Lumenier Micro AXII 2 5.8GHz U.FL Lite Antenna - RHCP &amp 30mm


The Lumenier Micro AXII 2 5.8GHz Antenna is the new generation of the world's most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full-size AXII antennas but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the

Lumenier Micro AXII 2 5.8GHz U.FL Lite Antenna - RHCP & 30mm

Lumenier Micro AXII 2 5.8GHz Antenna Regular UFL Lite - RHCP

Lumenier Micro AXII 2 5.8GHz Antenna Long UFL Lite - LHCP

The Lumenier Micro AXII 2 5.8GHz Antenna is the new generation of the world&#39s most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full size AXII antennas, but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the smallest, lightest and best performing FPV antennas in the world. The Micro AXII 2 antenna improves on the original Micro AXII antenna and features a new RF pathway technology (unique hybrid network) improving performance while still being incredibly small and light weight. 
Even though the Micro AXII 2 is both small and lightweight, it does not sacrifice on performance. In fact, it outperforms most other antennas in all categories. Precision engineering has given this antenna a near perfect Cross-Polar Rejection resulting in a true circularity. This means an RHCP Micro AXII antenna rejects nearly 100% of LHCP signals, giving you a crystal clear image free of multi-pathing noise. On top of that, the Micro AXII 2 has a best in class max gain of 1.9dBic enabling better range and penetration. It has a wide bandwidth covering the popular FPV 5GHz band from 5.5GHz-6.0GHz, ensuring you have a clear and strong signal no matter which frequency you&#39re on.
The Micro AXII is designed to be extremely durable and put up with the beatings FPV pilots put on their antennas. The entire antenna array is securely protected inside the injection molded outer casing. The outer shell case is made from an impact resistant polycarbonate material, and it is ultra-sonically sealed shut to guard the antenna elements inside. 
Check out all our 5.8GHz VTX antennas all our Lumenier products!
Features

Ultra-durable injection molded case
High Gain for long range
New and improved look
Improved efficiency

Specifications

Polarization: LHCP or RHCP
Gain: 1.9dBic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &amplt=1.5:1
Connector: U.FL
Cable Length: 75mm regular, 120mm long
Weight: 1-2.5g depending on length

Includes

1x Lumenier Micro AXII 2 5.8GHz Lite U.FL Antenna


Lumenier Micro AXII 2 5.8GHz Lite U.FL Antenna - Choose Version from WREKD Co.

Lumenier Micro AXII 2 5.8GHz Lite U.FL Antenna - Choose Version

The Lumenier Micro AXII 2 5.8GHz Antenna is the new generation of the world's most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full size AXII antennas, but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the smallest, lightest and best performing FPV antennas in the world. The Micro AXII 2 antenna improves on the original Micro AXII antenna and features a new RF pathway technology (unique hybrid network) improving performance while still being incredibly small and light weight. 
Even though the Micro AXII 2 is both small and lightweight, it does not sacrifice on performance. In fact, it outperforms most other antennas in all categories. Precision engineering has given this antenna a near perfect Cross-Polar Rejection resulting in a true circularity. This means an RHCP Micro AXII antenna rejects nearly 100% of LHCP signals, giving you a crystal clear image free of multi-pathing noise. On top of that, the Micro AXII 2 has a best in class max gain of 1.9dBic enabling better range and penetration. It has a wide bandwidth covering the popular FPV 5GHz band from 5.5GHz-6.0GHz, ensuring you have a clear and strong signal no matter which frequency you're on.
The Micro AXII is designed to be extremely durable and put up with the beatings FPV pilots put on their antennas. The entire antenna array is securely protected inside the injection molded outer casing. The outer shell case is made from an impact resistant polycarbonate material, and it is ultra-sonically sealed shut to guard the antenna elements inside. 
Check out all our 5.8GHz VTX antennas all our Lumenier products!
Features

Ultra-durable injection molded case
High Gain for long range
New and improved look
Improved efficiency

Specifications

Polarization: LHCP or RHCP
Gain: 1.9dBic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: &lt=1.5:1
Connector: U.FL
Cable Length: 75mm regular, 120mm long
Weight: 1-2.5g depending on length

Includes

1x Lumenier Micro AXII 2 5.8GHz Lite U.FL Antenna


When the original Lumenier Micro AXII Antenna was released it set a new standard for micro sized FPV antennas with incredible performance in a tiny package. The&nbspMicro AXII 2&nbspimproves upon the original design and pushes the boundaries even further!

When the original Lumenier Micro AXII Antenna was released it set a new standard for micro sized FPV antennas with incredible performance in a tiny package. The Micro AXII 2 improves upon the original design and pushes the boundaries even f

Lumenier Micro AXII 2 Antenna 5.8GHz - U.FL Lite

Lumenier Micro AXII 2 5.8GHz Antenna Regular UFL Lite - LHCP

VTX Antenna Connector

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.