FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

HolyBro

Holybro SiK 500mW 915MHz Telemetry Radio V3

Holybro

This Holybro SiK Telemetry V3 Radio is a small, light, and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometers using a patch antenna on the ground).&nbsp

This Holybro SiK Telemetry V3 Radio is a small, light, and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometers using a patch antenna on the grou

Holybro SiK Telemetry Radio V3 (2pcs) - 500mW + 915MHz

Receiver Type

The radio receiver takes the inputs from your radio and sends them to your flight controller. Your receiver will need to be compatible with your radio or radio module. Beginners should get an ELRS receiver for the best range and price point. Learn more about radios and receivers.

Receivers

NDAA Compliant products include parts that adhere to the requirements outlined in Section 848 of the National Defense Authorization Act

NDAA Compliant Receiver (Beta)

Holybro SiK 100mW 915MHz Telemetry Radio V3

This Holybro SiK Telemetry V3 Radio is a small, light, and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometers using a patch antenna on the ground).

Holybro SiK Telemetry Radio V3 (2pcs) - 100mW 915MHz

NewBeeDrone

NewBeeDrone Beeceiver DSM V2 Receiver

After creating one of the best micro receivers on the market, we went back to the lab and improved the range by almost double! By using diversity antennas (The world&#39s smallest diversity DSM compatible receivers) not only are you getting better range, but your getting a more reliable signal in tougher RF environments. We also made it smaller and lighter making it and even better choice for current micro brushed and brushless whoops. 
Binding Instruction:

Power on receiver
Push bind button once - (LED will blink red/blue)
Bind to Radio - Done!

Features

Ultra mini size and light weight
Serial signal output
IPEX connector, replaceable antennas

Specifications

Dimension: 16*11*5.4mm (L*W*H)
Weight: 0.78g (including dual antenna)
Compatible Protocols: DSMX / DSM2
Operating Voltage Range: 3~10V

Includes

Beeceiver V2
Silicone Wires
Heatshrink


After creating one of the best micro receivers on the market, we went back to the lab and improved the range by almost double! By using diversity antennas (The world's smallest diversity DSM compatible receivers) not only are you getting better range, but your getting a more reliable signal in tougher RF environments. 

NewBeeDrone Beeceiver DSM V2 Compatible Micro Receiver from WREKD Co.

NewBeeDrone Beeceiver DSM V2 Compatible Micro Receiver

After creating one of the best micro receivers on the market, we went back to the lab and improved the range by almost double! By using diversity antennas (The world's smallest diversity DSM compatible receivers) not only are you getting better range, but your getting a more reliable signal in tougher RF environments. We also made it smaller and lighter making it and even better choice for current micro brushed and brushless whoops. 
Binding Instruction:

Power on receiver
Push bind button once - (LED will blink red/blue)
Bind to Radio - Done!

Features

Ultra mini size and light weight
Serial signal output
IPEX connector, replaceable antennas

Specifications

Dimension: 16*11*5.4mm (L*W*H)
Weight: 0.78g (including dual antenna)
Compatible Protocols: DSMX / DSM2
Operating Voltage Range: 3~10V

Includes

Beeceiver V2
Silicone Wires
Heatshrink


NewBeeDrone BeeCeiver Flysky Receiver

After creating one of the best micro receivers on the market, we went back to the lab and improved the range by almost double! By using diversity antennas (The world&#39s smallest diversity Flysky compatible receivers)not only are you getting better range, but your getting a more reliable signal in tougher RF environments. We also made it smaller and lighter making it an even better choice for current micro brushed and brushless whoops. 

Binding Instructions:

Power on receiver
Push bind button once - (LED will blink red/blue)
Bind to Radio - Done!

Features

Ultra mini size and lightweight
Sbus signal output
Solder onboard Micro Antenna

Specifications

Dimension: 13mm*11.5mm (L*W)
Weight: 0.51g
Compatible Protocols: Flysky
Operating Voltage Range: 3~10V

Includes

BeeCeiver Flysky
Silicone Wires
Heat shrink


After creating one of the best micro receivers on the market, we went back to the lab and improved the range by almost double! By using diversity antennas (The world's smallest diversity Flysky compatible receivers)not only are you getting better range, but your getting a more reliable signal in tougher RF environments

NewBeeDrone Beeceiver Flysky Compatible Micro Receiver from WREKD Co.

NewBeeDrone Beeceiver Flysky Compatible Micro Receiver

After creating one of the best micro receivers on the market, we went back to the lab and improved the range by almost double! By using diversity antennas (The world's smallest diversity Flysky compatible receivers)not only are you getting better range, but your getting a more reliable signal in tougher RF environments. We also made it smaller and lighter making it an even better choice for current micro brushed and brushless whoops. 

Binding Instructions:

Power on receiver
Push bind button once - (LED will blink red/blue)
Bind to Radio - Done!

Features

Ultra mini size and lightweight
Sbus signal output
Solder onboard Micro Antenna

Specifications

Dimension: 13mm*11.5mm (L*W)
Weight: 0.51g
Compatible Protocols: Flysky
Operating Voltage Range: 3~10V

Includes

BeeCeiver Flysky
Silicone Wires
Heat shrink


RadioMaster

RadioMaster R81 2.4GHz Micro Receiver

Introducing the Radiomaster R-Series! This R81 Nano Receiver (with Sbus Output) has 8 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers. These R series receivers are either compatible with Frsky D8 or D16 modes and are suitable for RC drones and aircraft, etc.
Note: This version is not pre-soldered.
Features

Frsky D8 Compatible
8 Channels


Specifications 

Antenna length: Approximately 6cm
Signal format: Frsky D8 Compatible
RSSI: RSSI on Ch9 of Sbus Output
Frequency range: 2400-2483.5Mhz
Power input range: 4.5-6V
Range: more than 1km
Output format: SBUS
Weight: 2 grams
Size: 17x11mm
Channels: 8

Manuals

R81 Receiver User manual


Includes

1x Radiomaster R81 Nano Receiver w/ Sbus
1x Connecting Wire


Introducing the Radiomaster R-Series! This R81 Nano Receiver (with Sbus Output) has 8 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers. These R series receivers are either compatible with Frsky D8 or D16 modes and are suitable for RC drones and aircraft, etc. Note: This vers

R81 2.4GHz Receiver For FrSky Protocol

Radiomaster R81 is a FrSky D8 compatible receiver with dual antennas, SBUS out, and a tiny size.  Very similar to the FrSky XM+.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Specifications

Channels: 8CH
Frequency range: 2400-2483.5Mhz
Power input range: 4.5-6V
Signal format: FrSky D8 Compatible
Output format: SBUS (Inverted) 
Support return: support return RSSI
Control distance: more than 1km
Antenna length: Approximaltly 6cm
Size: 17x11 mm
Weight: 2g

Includes

1x RadioMaster R81 SBUS D8 2.4GHz Nano Receiver

Bind method:
1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode
2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind
3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat step 1 and 2

Fail-safe Protection:
1. Press the BIND button once within 10 seconds of th eceiver being powered on, and the receiver will save all the current channel values of the remote control as the fail-safe value
2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to prevent accidental changes to to the fail-safe settings while preparing the model for flight

RSSI output:
This receiver has a total of 9 channels. 8 channels + an RSSI output channel. 
Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight controller and sent to the OSD device Show
signal strength.








Radiomaster R81 is a FrSky D8 compatible receiver with dual antennas, SBUS out, and a tiny size.  Very similar to the FrSky XM+. Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories! Specifications Channels: 8CH Frequency range: 2400-2483.5Mhz Power input range: 4.5-6V Signal for

RadioMaster R81 2.4GHz Frsky D8 Protocol Micro Receiver from WREKD Co.

RadioMaster R81 2.4GHz Frsky D8 Protocol Micro Receiver

HOBBYPORTER

The RadioMaster R81 8CH SBUS 2.4GHz Nano Receiver features FrSky D8 compatibility and dual antennas to take advantage of its small size. See this tiny powerhouse today!

RadioMaster R81 8CH SBUS 2.4GHz Nano Receiver for Sale - RaceDayQuads

Introducing the Radiomaster R-Series! This R81 Nano Receiver (with Sbus Output) has 8 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers.&nbspThese R series receivers are either compatible with Frsky D8 or D16 modes and are suitable for RC drones and aircraft, etc.

Introducing the Radiomaster R-Series! This R81 Nano Receiver (with Sbus Output) has 8 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers. These R series receivers are either compatible with Frsky D8 or 

Radiomaster R81 8CH Frsky D8 / D16 Compatible Nano Receiver w/Sbus

RadioMaster R88 2.4GHz Wing Receiver

The R88 V2 receiver is Frsky D8 / D16 and Futaba SFHSS Compatible and offers a range suitable to drones and RC modelers.  This receiver has a total of 8 PWM channels + 9 SBUS Channels (Sbus has 8 control channels + 1 RSSI channel). Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver, which can be read by various flight controllers and sent to the OSD to show signal strength in the FPV video feed. Check out our RadioMaster selection, the rest of our RC receivers and all our RC transmitters, modules, and accessories!




Specifications

Signal format: D8, D16 &ampamp SFHSS Compatible

Output format: PWM
Frequency Range: 2400 MHz to 2483.5 MHz
Power input range: 4.5-6V

Output format: PWM/Sbus
Support return: support return RSSI
Dimension: 40x26x16mm
Range: more than 1km
Antenna length: 15 cm
Weight: 11g

User Manual

User Manual

Includes

1x RadioMaster R88 V2 2.4GHz Wing Receiver
1x Cable




Bind method
1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode
2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind
3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat step 1 and 2

Fail-safe Protection:
1. Press the BIND button once within 10 seconds of the receiver being powered on, and the
receiver will save all the current channel values of the remote control as the fail-safe value
2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to
prevent accidental changes to to the fail-safe settings while preparing the model for fa

RSSI output:
This receiver has a total of 9 channels. 8 channels + an RSSI output channel. 
Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight controller and sent to the OSD device Show
signal strength.








The R88 V2 receiver is Frsky D8 / D16 and Futaba SFHSS Compatible and offers a range suitable to drones and RC modelers.  This receiver has a total of 8 PWM channels + 9 SBUS Channels (Sbus has 8 control channels + 1 RSSI channel). Channels 1-8 are controlled by the remote controller, the 9th channel is the signal stre

RadioMaster R88 V2 2.4GHz Frsky D8/D16/SFHSS Protocol PWM Receiver from WREKD Co.

RadioMaster R88 V2 2.4GHz Frsky D8/D16/SFHSS Protocol PWM Receiver

Introducing the Radiomaster R-Series! This R88 PWM Receiver (with Sbus Output) has 8 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers. 

Radiomaster R88 8CH Frsky D8 Compatible PWM Receiver w/Sbus

The R88 V2 receiver is Frsky D8 / D16 and Futaba SFHSS Compatible and offers a range suitable to drones and RC modelers.  This receiver has a total of 8 PWM channels + 9 SBUS Channels (Sbus has 8 control channels + 1 RSSI channel). Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver, which can be read by various flight controllers and sent to the OSD to show signal strength in the FPV video feed. Check out our RadioMaster selection, the rest of our RC receivers and all our RC transmitters, modules, and accessories!




Specifications

Signal format: D8, D16 &amp SFHSS Compatible

Output format: PWM
Frequency Range: 2400 MHz to 2483.5 MHz
Power input range: 4.5-6V

Output format: PWM/Sbus
Support return: support return RSSI
Dimension: 40x26x16mm
Range: more than 1km
Antenna length: 15 cm
Weight: 11g

User Manual

User Manual

Includes

1x RadioMaster R88 V2 2.4GHz Wing Receiver
1x Cable




Bind method
1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode
2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind
3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat step 1 and 2

Fail-safe Protection:
1. Press the BIND button once within 10 seconds of the receiver being powered on, and the
receiver will save all the current channel values of the remote control as the fail-safe value
2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to
prevent accidental changes to to the fail-safe settings while preparing the model for fa

RSSI output:
This receiver has a total of 9 channels. 8 channels + an RSSI output channel. 
Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight controller and sent to the OSD device Show
signal strength.








Happymodel

Happymodel FLI14+ 2.4GHz Mini Receiver

FPVELITE

Considered by many to be the best FlySky compatible receiver out there for quads, the Fli14+ offers dual antennas, telemetry, and RSSI over CH14. It's a solid value RX for FlySky users!
Check out all our receivers, FlySky compatible gear, and our Happymodel product selection!

Features

Customized for Betaflight
RSSI Display Via OSD without any hack compatible with all Flysky AFHDS-2A protocol transmitter
Telemetry output :RSSI &amp RX Battery
Support RSSI Via Channel14(Aux10 in Betaflight)
Best for FPV Racing drone
Compatible with FS-i4, FS-i6,FS-I6X,FS-i6S, FS-i10,FS-iT4S, Eachine I6,Turnigy I6S, Turnigy Evolution


Specifications

Channel: 14
Protocol: AFHDS-2A
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Antenna Length: 70mm  (Dual antennas)
Input Power: 4.0-6.5V DC
Weight: Only 1.7g
Size: 25mm*15mm*5mm
Color: Black
Signal Output: IBUS
RSSI Output: Channel14
No ground interference ( Transmitting and receiving 1 m from the ground): &gt500m

Binding Procedure


1. Power for the Fli14 Receiver while press and holding the bind button
2. The LED will blinking fast , this indicates the receiver is in binding mode
3. Get the Flysky transmitter into binding mode , the LED on the receiver will getting to be solid and this indicates binding successfully


Includes

1x HappyModel FLI14 Plus FlySky Compatible Receiver


The HappyModel FLI14+ 2.4GHz FlySky Compatible RC Receiver is considered the best FlySky receiver on the market. Add it to your build now to see why!

HappyModel FLI14+ 2.4GHz Mini Receiver - FlySky Compatible

HappyModel FLI14+ 2.4GHz FlySky Compatible RC Receiver for Sale

Considered by many to be the best FlySky compatible receiver out there for quads, the Fli14+ offers dual antennas, telemetry, and RSSI over CH14. It&#39s a solid value RX for FlySky users!
Check out all our receivers, FlySky compatible gear, and our Happymodel product selection!

Features

Customized for Betaflight
RSSI Display Via OSD without any hack compatible with all Flysky AFHDS-2A protocol transmitter
Telemetry output :RSSI &ampamp RX Battery
Support RSSI Via Channel14(Aux10 in Betaflight)
Best for FPV Racing drone
Compatible with FS-i4, FS-i6,FS-I6X,FS-i6S, FS-i10,FS-iT4S, Eachine I6,Turnigy I6S, Turnigy Evolution


Specifications

Channel: 14
Protocol: AFHDS-2A
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Antenna Length: 70mm  (Dual antennas)
Input Power: 4.0-6.5V DC
Weight: Only 1.7g
Size: 25mm*15mm*5mm
Color: Black
Signal Output: IBUS
RSSI Output: Channel14
No ground interference ( Transmitting and receiving 1 m from the ground): &ampgt500m

Binding Procedure


1. Power for the Fli14 Receiver while press and holding the bind button
2. The LED will blinking fast , this indicates the receiver is in binding mode
3. Get the Flysky transmitter into binding mode , the LED on the receiver will getting to be solid and this indicates binding successfully


Includes

1x HappyModel FLI14 Plus FlySky Compatible Receiver


Considered by many to be the best FlySky compatible receiver out there for quads, the Fli14+ offers dual antennas, telemetry, and RSSI over CH14. It's a solid value RX for FlySky users! Check out all our receivers, FlySky compatible gear, and our Happymodel product selection! Features Customized for Betaflight RSSI Dis

HappyModel FLI14+ 2.4GHz Mini Receiver - FlySky Compatible from WREKD Co.

FlySky

FlySky FS-X14S 2.4GHz Micro Receiver

The Flysky X14S is one of the featured-filled AFHSD 2A receivers. Compatible with NV14, FS-TH9X, FS-I6, FS-i6X, FS-i4, and FS-i4X transmitters.

Flysky FS-X14S AFHDS 2A Receiver

Flysky





Specifications
 

Product Model: FS-X14S
PWM channel: None
Wireless frequency: 2.4GHz
Wireless protocol: AFHDS 2A
Range: 500 ～ 1500m (in the air)
Antenna type: dual antenna (92.5mm * 2)
Power: 3.5-8.4V
RSSI: Not supported
Data port: PPM / s.bus
Temperature range: -10 ℃ — + 60 ℃
Humidity range: 20% -95%
Online update: No
Dimensions: 20mm * 12mm * 3.5mm
Weight: 2.5g
Certification: CE, RCM, FCC















Specifications   Product Model: FS-X14S PWM channel: None Wireless frequency: 2.4GHz Wireless protocol: AFHDS 2A Range: 500 ～ 1500m (in the air) Antenna type: dual antenna (92.5mm * 2) Power: 3.5-8.4V RSSI: Not supported Data port: PPM / s.bus Temperature range: -10 ℃ — + 60 ℃ Humidity range: 20% -95% Online update: No

FS-X14S 2.4GHz Receiver For FlySky Protocol

RadioMaster R86C 2.4GHz Wing Receiver

Introducing the Radiomaster R-Series! This R86C PWM Receiver (with Sbus Output) has 6/8 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers.  Check out all our Receivers and the rest of our Radiomaster Products! Features: Frsky D8 Compatible Failsafe Protection RSSI Output 6/8 

Radiomaster R86C 6CH Frsky D8 Compatible PWM Receiver w/Sbus

Introducing the Radiomaster R-Series! This R86C PWM Receiver (with Sbus Output) has 6/8 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers. 

RadioMaster R84 2.4GHz Mini Receiver

Introducing the Radiomaster R-Series! This R84 PWM Receiver has 4 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers.  Check out all our Receivers and the rest of our Radiomaster Products! Features: Frsky D8 Compatible Failsafe Protection 4 Channels Specifications: Signal form

Radiomaster R84 4CH Frsky D8 Compatible PWM Receiver

RadioMaster R84 4 Channel RC Radio ReceiverClick here to download product manual.Product Support: www.radiomasterrc.com/support#a04Channels: 4Frequency range: 2400-2483.5MhzPower input range: 4.5-6VSignal format: Frsky D8 CompatibleOutput format: PWMSupport return: support return RSSIControl distance: more than 1kmAntenna length: 6cmSize: 17x11mmWeight: 2 grams

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

RadioMaster R84 4 Channel RC Radio Receiver - RMRC

RadioMaster R84 4 Channel RC Radio Receiver

Introducing the Radiomaster R-Series! This R84 PWM Receiver has 4 channels and is Frsky D8 compatible, offering a range suitable for both drone and RC modelers. 

Spektrum

Spektrum SPM4650 V2 DSMX SRXL2 Serial Micro Receiver

The SPM4650 DSMX SRXL2 Serial Micro Receiver takes the original SPM4648 receiver and adds more value, functionality and fly-by telemetry, while decreasing the size and weight of the already micro sized Spektrum serial receiver. The SPM4650 uses our feature-rich SRXL2 protocol to give pilots a blazing fast serial data c

Spektrum SPM4650 DSMX SRXL2 Serial Micro Receiver V2

The Spektrum SPM4650 DSMX SRXL2 Serial Micro Receiver takes the original SPM4648 receiver and adds more value, functionality, and fly-by telemetry while decreasing the size and weight of the already micro-sized Spektrum serial receiver.

FlySky FS-iA6B 2.4GHz Wing Receiver

FlySky FS-iA6B 6ch Receiver - Dual Antennas

FlySky FS-iA6B Receiver 6CH 2.4G AFHDS 2A Telemetry Receiver

FlySky FS-iA6 2.4GHz Receiver

FlySky FS-iA6 6ch Receiver - Dual Antennas

FlySky FS-iA6 Receiver 6CH 2.4G AFHDS 2A Receiver

Diatone

Diatone Mamba MSR SBUS D1616CH ACCST Receiver

Diatone Mamba MSR Receiver with SBUS and 16CH ACCST! Check out all our Receivers and the rest of our Diatone Products! Specifications: Size: 24x11.7x4.4mm M2 (20mm x 2) Weight: 1.6g Working Voltage: 3.5-10v Working Current: 70mA/5V Channels: 16CH ACCST D16 Antenna Connector: IPEX4 Supply: 4pin x 2 Package Includes: 1 x

FullSpeedRC

FullSpeedRC FSD-Nano V2 Receiver - DSM/X/2

Item Name：DSMX Nano V2Brand name：Full SpeedVoltage ：5VProduct weight：0.8gSignal system：DSMX( Support DSM2)automatic retrieval Band：2.4GHzDistance：300M+Product size：14.5 x 10.5 x 2.5mmBinding (DSMX)1. Connet the receiver to FC and run the BF.Choose the correct port and type of your receiver on the flight controller.2. T