FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

ImmersionRC

ImmersionRC Ghost Atto 2.4GHz Micro Receiver w/ qT Antenna

This ImmersionRC Ghost Atto Receivers + qT Antennas Bundle includes three Ghost Atto Receivers and three qT Dipole Antennas! 

<p>This&nbsp;<strong>ImmersionRC Ghost Atto Receivers + qT Antennas Bundle</strong>&nbsp;is designed&nbsp;for both reliable control at extreme range, and extremely low latency with a best-in-class frame rate for the Race

ImmersionRC Ghost Atto Receivers + qT Antennas Bundle

Size matters. The Ghost Átto RX weighs in at about 0.6g, and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor. Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k) and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs. Deja-Vu binding ensures that receivers already ‘known’ by a Ghost transmitter (through a previous bind operation) no longer require a button press to bind them. This also goes for new receivers, which will bind for the first time without the need for the button (all of this because we can’t stand tearing models open to find that buried bind button). Editor’s Note: Should we mention that the Átto is the ‘Big’receiver?… more on that later.Check out our Receivers, IRC Ghost Products and all our ImmersionRC Products! Features: 2.4GHz ISM Band ‘JR’ Compatible Transmitter with Diversity Transmission One Of The Smallest Receivers On the Market Chirp Spread Spectrum, with Adaptive FHSS Crazy Race Performance, 222.22Hz updates ~4ms End to End Latency, with OpenTx Integration More range than most pilots will ever need Specifications: Downlink RF Power: +13dBm Sensitivity: -117dBm in Long Range mode Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted Firmware: Over-the-air (OTA) upgradable Power Supply: 5V recommended, as low as 3.3V tolerated vTx Control: Tramp control from ‘T’ pin on Rx, regardless of selected serial format Dimensions: 14.8mm x 11.5mm, 0.6g (w/o antenna) Rx Noise Floor Analysis: Auto on power-up, or on demand from the Tx Package Includes: 1 x Atto Receiver 1 x qTee Antenna Silicone Cables Heat Shrink Orqa Goggle Integration: That space on the FPV.Connect board… yeah, that is for a Ghost receiver, the Átto. Ghost transmitters and receivers can form a network, without the need to use bluetooth or wifi, and communicate between themselves without sacrificing critical control performance. Clear channel scan with automatic channel assignment, auto-start DVR recording when throttle stick is raised, and a bunch of other cool features planned for 2020. Proton Packs for Days: Simple PCBs designed to dramatically simplify wiring, mounting, and cooling of Tramp Nano + Ghost combinations.36x36 single-sided, 20x20 double sided, 20x20 single sided, ‘Toothpick style’, and a special version designed for the Five33 Tiny Trainer. qTee Antennas: qTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun to ensure no cable radiation, and without unexpected nulls in the radiation pattern.Tip to Tip length of just 60mm, easy to install in anything from a Whoop™ to an X-Class quad Systems Integrators/Manufacturers: ImmersionRC is open to discuss with manufacturers who wish to embed Ghost into other systems (Hobby, Industrial, Law Enforcement, etc.). An embedded Ghost 2.4GHz Rx occupies approx. 10mm x 10mm of PCB space. For use on sub-GHz bands, the ‘Red Ghost’ product line can be custom ordered for use on licensed bands from 140MHz to 1GHz. GPS + Noise: Another advantage of running 2.4GHz instead of the more traditional sub-GHz frequencies for long range is that 2.4GHz has no harmonics that can desensitize GPS receivers (which are in the 1.5GHz band), so GPS position fixes become more precise.In addition, Drone/Quad/UAV electrical noise due to fast switching signals is broadband, and also sub-GHz (typically sub-500MHz), and doesn’t desensitize the 2.4GHz Ghost receiver.

ImmersionRC Ghost Átto 2.4Ghz Receiver

IMMERSIONRC

All Ghost receivers currently have multiple binding methods. We recommend binding via SRXL2 on a standard UART, the Ghost Protocol will be available with the release of OpenTX3.4. 
Please refer to the Manual for more information about binding.
Size matters. The Ghost Atto receiver weighs in at about 0.6g and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor.
Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k), and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs.
Deja-Vu binding ensures that receivers already ‘known’ by a Ghost transmitter (through a previous bind operation) no longer require a button press to bind them. This also goes for new receivers, which will bind for the first time without the need for the button (all of this because we can’t stand tearing models open to find that buried bind button).
Buy an extra antenna here.
Check out all our RC transmitters, modules and accessories as well as our ImmersionRC selection, and the rest of our Ghost products.
Features

2.4GHz ISM Band
‘JR’ Compatible Transmitter with Diversity Transmission
One Of The Smallest Receivers On the Market
Chirp Spread Spectrum, with Adaptive FHSS
Crazy Race Performance, 222.22Hz updates
~4ms End to End Latency, with OpenTx Integration
More range than most pilots will ever need

Specifications

Downlink RF Power: +13dBm
Sensitivity: -117dBm in Long Range mode
Serial Formats: SBus, SBus-Fast (200k), SRXL-2 (400k), GHST, SBus Inverted
Firmware: Over-the-air (OTA) upgradable
Power Supply: 5V recommended, as low as 3.3V tolerated
vTx Control: Tramp control from ‘T’ pin on Rx, regardless of the selected serial format
Dimensions: 14.8mm x 11.5mm, 0.6g (w/o antenna)
Rx Noise Floor Analysis: Auto on power-up, or on-demand from the Tx

Includes

1x ImmersionRC Ghost Atto 2.4GHz Micro Receiver 
1x qT Antenna for Atto

Manual

All Ghost receivers currently have multiple binding methods. We recommend binding via SRXL2 on a standard UART, the Ghost Protocol will be available with the release of OpenTX3.4. Please refer to the Manual for more information about binding. Size matters. The Ghost Atto receiver weighs in at about 0.6g and is only 14.


The Ghost Átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, SUPER SMALL.
Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k), and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs.
Deja-Vu binding ensures that receivers already ‘known’ by a Ghost transmitter (through a previous bind operation) no longer require a button press to bind them. This also goes for new receivers, which will bind for the first time without the need for the button (all of this because we can’t stand tearing models open to find that buried bind button).
Features

2.4GHz ISM Band
JR Compatible Transmitter with Diversity Transmission
One Of The Smallest Receivers On the Market
Chirp Spread Spectrum, with Adaptive FHSS
Crazy Race Performance, 222.22Hz updates
~4ms End to End Latency, with OpenTx Integration
More range than most pilots will ever need

Specifications

Downlink RF Power: +13dBm
Sensitivity: -117dBm in Long Range mode
Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted
Firmware: Over-the-air (OTA) upgradable
Power Supply: 5V recommended, as low as 3.3V tolerated
VTX Control: Tramp control from ‘T’ pin on Rx, regardless of the selected serial format
Dimensions: 14.8mm x 11.5mm, 0.6g (w/o antenna)
Rx Noise Floor Analysis: Auto on power-up, or on-demand from the Tx


For the latest firmware and or manuals please click here

The Ghost Átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, SUPER SMALL. Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k), and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs. Deja-Vu binding ensures that receivers alr

Átto 2.4Ghz Receiver For Ghost Protocol

The Ghost Átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, SUPER SMALL. Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k), and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs. Deja-Vu binding ensures that receivers already ‘known’ by a Ghost transmitter (through a previous bind operation) no longer require a button press to bind them. This also goes for new receivers, which will bind for the first time without the need for the button (all of this because we can’t stand tearing models open to find that buried bind button). Features 2.4GHz ISM Band JR Compatible Transmitter with Diversity Transmission One Of The Smallest Receivers On the Market Chirp Spread Spectrum, with Adaptive FHSS Crazy Race Performance, 222.22Hz updates ~4ms End to End Latency, with OpenTx

Size matters. The Ghost Átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor.

Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k) and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs.

Deja-Vu binding ensures that receivers already ‘known’ by a Ghost transmitter (through a previous bind operation) no longer require a button press to bind them. This also goes for new receivers, which will bind for the first time without the need for the button (all of this because we can’t stand tearing models open to find that buried bind button).

Editor’s Note: Should we mention that the Átto is the ‘Big’receiver?… more on that later.

Check out our Receivers, IRC Ghost Products and all our ImmersionRC Products!
FEATURES:

 	2.4GHz ISM Band
 	‘JR’ Compatible Transmitter with Diversity Transmission
 	One Of The Smallest Receivers On the Market
 	Chirp Spread Spectrum, with Adaptive FHSS
 	Crazy Race Performance, 222.22Hz updates
 	~4ms End to End Latency, with OpenTx Integration
 	More range than most pilots will ever need

SPECIFICATIONS:

 	Downlink RF Power: +13dBm
 	Sensitivity: -117dBm in Long Range mode
 	Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted
 	Firmware: Over-the-air (OTA) upgradable
 	Power Supply: 5V recommended, as low as 3.3V tolerated
 	vTx Control: Tramp control from ‘T’ pin on Rx, regardless of selected serial format
 	Dimensions: 14.8mm x 11.5mm, 0.6g (w/o antenna)
 	Rx Noise Floor Analysis: Auto on power-up, or on demand from the Tx

PACKAGE INCLUDES:

 	1 x Atto Receiver
 	1 x qTee Antenna
 	Silicone Cables
 	Heat Shrink

ORQA GOGGLE INTEGRATION:
That space on the FPV.Connect board… yeah, that is for a Ghost receiver, the Átto.

Ghost transmitters and receivers can form a network, without the need to use bluetooth or wifi, and communicate between themselves without sacrificing critical control performance.

Clear channel scan with automatic channel assignment, auto-start DVR recording when throttle stick is raised, and a bunch of other cool features planned for 2020.
PROTON PACKS FOR DAYS:
Simple PCBs designed to dramatically simplify wiring, mounting, and cooling of Tramp Nano + Ghost combinations.
36x36 single-sided, 20x20 double sided, 20x20 single sided, ‘Toothpick style’, and a special version designed for the Five33 Tiny Trainer.
QTEE ANTENNAS:
qTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun to ensure no cable radiation, and without unexpected nulls in the radiation pattern.
Tip to Tip length of just 60mm, easy to install in anything from a Whoop™ to an X-Class quad
SYSTEMS INTEGRATORS/MANUFACTURERS:
ImmersionRC is open to discuss with manufacturers who wish to embed Ghost into other systems (Hobby, Industrial, Law Enforcement, etc.). An embedded Ghost 2.4GHz Rx occupies approx. 10mm x 10mm of PCB space.

For use on sub-GHz bands, the ‘Red Ghost’ product line can be custom ordered for use on licensed bands from 140MHz to 1GHz.
GPS + NOISE:
Another advantage of running 2.4GHz instead of the more traditional sub-GHz frequencies for long range is that 2.4GHz has no harmonics that can desensitize GPS receivers (which are in the 1.5GHz band), so GPS position fixes become more precise.
In addition, Drone/Quad/UAV electrical noise due to fast switching signals is broadband, and also sub-GHz (typically sub-500MHz), and doesn’t desensitize the 2.4GHz Ghost receiver.

IMMERSIONRC GHOST ÁTTO 2.4GHZ RECEIVER | Five33

IMMERSIONRC GHOST ÁTTO 2.4GHZ RECEIVER

The Ghost Átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor. 


Size matters. The Ghost Átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor.
Most standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k) and an 

ImmersionRC Ghost Átto 2.4Ghz Rx

Receiver Type

The radio receiver takes the inputs from your radio and sends them to your flight controller. Your receiver will need to be compatible with your radio or radio module. Beginners should get an ELRS receiver for the best range and price point. Learn more about radios and receivers.

Receivers

ImmersionRC Ghost Atto Duo 2.4GHz Micro Receiver w/ qT Antennas

Why Race with Anything Else?
For racers on the bleeding edge, every little helps. Miss a single control packet at 160km/h (even at 222Hz) and a racing drone moves &ampgt 40cm (&ampgt 15 inches) without control.
The Atto Duo is a high-end receiver for drone racing which combines two independent receiver channels, and twin antennas, to dramatically reduce lost packets during racing.
Check out all our Receivers and the rest of our ImmersionRC Ghost Products!
Nothing comes even close.











 	 2.4GHz ISM Band
 	 Tiny 15 x 12mm, and 0.61g
 	 Two fully independent Ghost receivers
 	 Crazy Race Performance, 222.22Hz updates (500Hz Ready)
 	 ~4ms End to End Latency (2ms ready), with OpenTx Integration
 	 Fully supported by Betaflight with GHST driver

PACKAGE INCLUDES:

 	1x Atto Duo Receiver
 	2x qTee Antenna
 	Silicone Cables
 	Heat Shrink































A Growing Family
The Atto was the first member of the Ghost Receiver family. Small enough for most applications, and best-in-class performance.
The tiny Zepto, 10mm x 10mm, and weighing in at 0.31g, is ideal for micro-class quads, including Cine-Whoops where every gram matters. Same mounting hole pattern for installation on any of the Proton Pack boards.
The new Atto Duo is the same size and weight as the Atto.














Proton Pack Compatible
By far the cleanest way to mount the essential Video Transmitter, and Ghost Receiver, on a 30×30, 20×20, or Whoop/Toothpick frame.
Single-sided PCB, with low-profile mounting of transmitter and receiver, which doubles as heat-sink for the video transmitter.




















































Why Full Diversity?
When racing, the control link, connecting the pilot’s brain to the drone, is absolutely critical.
Standard receivers, using single antennas, or dual-antenna setups using ‘Antenna Diversity’ drop performance when antennas are blocked by frames or batteries, or when the nulls in the antenna radiation pattern cause signal loss.
True diversity receivers use two completely independent receiver chains to greatly improve performance. Every control packet gets two chances to be received correctly.














Long Range FPV, and UAV Benefits
For long range FPV, and UAV use, where slow movement of an aircraft can result in significant time spent in antenna nulls, the Atto Duo is exactly what is required.
Link Margins are significantly improved with a full diversity link, and with improved link margin comes extended range, or increased security at shorter range.


























SPECIFICATIONS &ampamp SUPPORT FILES
Essential Specs, User Manuals, Firmware &ampamp Downloads:















 	Product Specifications
 	User Manuals
 	Firmware / Downloads




ÁTTO DUO RX SPECIFICATIONS





 	Receivers: Twin, Independent, Full Diversity
 	Frame Rate: 250Hz Standard, 500Hz Ready
 	Downlink RF Power: +13dBm
 	Sensitivity: -117dBm in Long Range mode
 	Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted  1 2 3
 	Firmware: Over-the-air (OTA) upgradable
 	Power Supply: 5V recommended, as low as 3.6V tolerated, no more than 5.5V
 	vTx Control: Tramp control from ‘T’ pin on Rx, regardless of selected serial format
 	Antenna Connectors: Standard U.FL (vs. Zepto which uses the much smaller MHF4)
 	Dimensions: 14.8mm x 11.5mm, 0.6g (w/o antenna)
 	Rx Noise Floor Analysis: Auto on power-up, or on demand from the Tx





1 GHST protocol available both OpenTx 2.3.10 (without control sync), and in a custom IRC build with sync.
2 GHST protocol supported in Betaflight 4.3 development builds.
3 Sbus is inverted by definition, SBus Inverted flips it over so that it doesn’t require inverters on F4 FCs
4 Some specifications vary depending upon the regionally-specific product SKU

IMMERSIONRC GHOST ATTO DUO – THE ULTIMATE RACER’S RECEIVER | Five33

IMMERSIONRC GHOST ATTO DUO – THE ULTIMATE RACER’S RECEIVER

Why Race with Anything Else? For racers on the bleeding edge, every little helps. Miss a single control packet at 160km/h (even at 222Hz) and a racing drone moves &gt; 40cm (&gt; 15 inches) without control. The Atto Duo is a high-end receiver for drone racing which combines two independent receiver channels, and twin a

ImmersionRC Ghost Atto Duo – The Ultimate Racer’s Receiver

ImmersionRC Ghost Atto Duo 2.4GHz Receiver

The Ghost Atto Duo is a high-end receiver by ImmersionRC for drone racing that combines two independent receiver channels, and twin antennas, to dramatically reduce lost packets during racing. Nothing comes even close!
A Growing Family
Th