FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

iFlight

iFlight BLITZ Mini E55S 55A 2-6S 20x20 4in1 ESC

RaceDayQuads

Another great addition to iFlight's ESC lineup. With 2-6S input, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55S is a great value option for a 20x20 ESC.
Check out all our 20x20 ESCs and all our iFlight gear selection!
Features

V1.1 added metal mosfets to the bottom of the ESC for better heat dissipation and performance. 

Specifications

Input Voltage: 2-6S

Max. Continuous Current: 55A
Max. Burst Current: 60A 
MCU: BB21
BEC: No
Current Sensor: Yes
Firmware: BLHeli_S
Target: QH-50 16.7
Mounting Dimensions: 20x20mm/Φ4mm
Dimensions 35x42mm

Weight: 11.3g


Includes

1x iFlight Blitz Mini E55S Mini (v1.1) 8Bit 55A 2-6S 20x20 4in1 ESC
1x Wiring Set


Another great addition to iFlight's ESC lineup. With 2-6S input, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55S is a great value option for a 20x20 ESC. Check out all our 20x20 ESCs and all our iFlight gear selection! Features V1.1 added metal mosfets to the bottom of the ESC for better heat diss

iFlight Blitz Mini E55S Mini (v1.1) 8Bit 55A 2-6S 20x20 4in1 ESC

Single / 4-in-1 ESC

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

ESC Stack Mount

Firmware

Minimum Voltage

Maximum Voltage

Aikon

Aikon AK32 Pro V2 32Bit 50A 2-6S 20x20 4in1 ESC

The Aikon AK32Pro II 4-in-1 50A 6S continues Aikon’s pursuit of excellence! This new ESC combines the latest forward-looking capabilities with an L4-based processor and dual MOSFET packages. This allows the AK32Pro II to achieve 96khz PWM rates and the fastest DShot input rates available. Check out all the Electronic S

Aikon AK32Pro II 4in1 50A 6S BLHeli32 ESC W/ Heatsink - 20x20mm

The Aikon AK32Pro II 4-in-1 50A 6S continues Aikon’s pursuit of excellence! This new ESC combines the latest forward-looking capabilities with an L4-based processor and dual MOSFET packages.

Aikon AK32Pro II 50A 2-6S BLHeli32 4-in-1 ESC 

The Aikon AK32 Pro II continues Aikon's pursuit of excellence! This ESC combines the latest forward-looking capabilities with top of the line reliability. 
Make sure to check out our other ESCs and entire line of Aikon gear!
Specifications

Input Voltage: 2-6S
MCU: AT32F421
Max Continuous Current: 50A
Max Burst Current: 65A
Firmware: BLHeli32
Bootloader: Yes
Mounting Pattern: 20x20mm
Weight: 13.8g

Includes

1x Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC


The Aikon AK32 Pro II continues Aikon's pursuit of excellence! This ESC combines the latest forward-looking capabilities with top of the line reliability.  Make sure to check out our other ESCs and entire line of Aikon gear! Specifications Input Voltage: 2-6S MCU: AT32F421 Max Continuous Current: 50A Max Burst Current:

Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC

EMAX

EMAX Formula Series 32Bit 45A 2-5S ESC

Introducing the new Formula32 ESC from EMAX, our first in a series of BLHELI32 specific ESCs. Lightweight and small in width, the Formula32 provides 45 amps of power using DSHOT1200 in order to provide you with the smoothest flight possible. Combined with F3-F7 Flight Controllers capable of 32K looping, the Formula32 w

EMAX FORMULA SERIES 45A ESC SUPPORT BLHELI_32 2-5S

Emax

EMAX Bullets have been the go-to for size vs power for racers this year so it is only natural that EMAX pushes the limits again with the amount of power we can fit into ESCs.  With them also being 45a, 32bit, and can handle up to 5S, we have a new front-runner for next level performance. 
Introducing the new Formula32 ESC from EMAX, our first in a series of BLHELI32 specific SCs. Lightweight and small in width, the Formula32 provides 45 amps of power using DSHOT1200 in order to provide you with the smoothest flight possible. Combined with F3-F7 Flight Controllers capable of 32K looping, the Formula32 will deliver efficient and controlled power to your high speed racing drone.
Check out our ESC collection, and our selection of EMAX gear!
Specifications


Input voltage: 2-5S Lipo
BEC: NO
Continue Current: 45A
Burst current: 55A
Firmware: BLHeli_32
Weight: 2.6g (w/o wire)
MCU STM32F051 using BLHeli_32 
DSHOT up to 1200

Includes

1x EMAX Formula Series 2-5S 32Bit DShot1200 45A ESC

 


EMAX Bullets have been the go-to for size vs power for racers this year so it is only natural that EMAX pushes the limits again with the amount of power we can fit into ESCs.  With them also being 45a, 32bit, and can handle up to 5S, we have a new front-runner for next level performance.  Introducing the new Formula32 

EMAX Formula Series 32Bit 2-5S 45A ESC from WREKD Co.

EMAX Formula Series 32Bit 2-5S 45A ESC

Lightweight and small in width, the Formula32 provides 45 amps of power using DSHOT1200 in order to provide you with the smoothest flight possible.

iFlight BLITZ E55 Mini v1.3 55A 32bit 2-6S 20x20 4in1 ESC

Another great addition to iFlight&#39s ESC lineup. With 2-6S input, BLHELI32 firmware, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55 55A 2-6S 20x20 4in1 ESC is a great value option for a 20x20 ESC.
Check out all our 20x20 ESCs and all our iFlight gear selection!
Features

V1.3 added metal mosfets to the bottom of the ESC for better heat dissipation and performance. 

Specifications

Input Voltage: 2-6S

Max. Continuous Current: 55A
Max. Burst Current: 60A 
MCU: G071
BEC: No
Current Sensor: Yes
Firmware: BLHeli32
Target: IFLIGHT_BLITZ_G1
Mounting Dimensions: 20x20mm/Φ4mm
Dimensions 35x42mm

Weight: 11.3g


Includes

1x iFlight Blitz E55 V1.3 Mini 32bit 55A 2-6S 20x20 4in1 ESC
1x Wiring Set


Another great addition to iFlight's ESC lineup. With 2-6S input, BLHELI32 firmware, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55 55A 2-6S 20x20 4in1 ESC is a great value option for a 20x20 ESC. Check out all our 20x20 ESCs and all our iFlight gear selection! Features V1.3 added metal mosfets to 

iFlight Blitz E55 Mini (v1.3) 32bit 55A 2-6S 20x20 4in1 ESC from WREKD Co.

iFlight Blitz E55 Mini (v1.3) 32bit 55A 2-6S 20x20 4in1 ESC

IFLIGHT

Another great addition to iFlight's ESC lineup. With 2-6S input, BLHELI32 firmware, up to 60A bursts, and an integrated capacitor, the iFlight BLITZ E55 55A 2-6S 20x20 4in1 ESC is a great value option for a 20x20 ESC.
Check out all our 20x20 ESCs and all our iFlight gear selection!
Features

V1.3 added metal mosfets to the bottom of the ESC for better heat dissipation and performance. 

Specifications

Input Voltage: 2-6S

Max. Continuous Current: 55A
Max. Burst Current: 60A 
MCU: G071
BEC: No
Current Sensor: Yes
Firmware: BLHeli32
Target: IFLIGHT_BLITZ_G1
Mounting Dimensions: 20x20mm/Φ4mm
Dimensions 35x42mm

Weight: 11.3g


Includes

1x iFlight Blitz E55 V1.3 Mini 32bit 55A 2-6S 20x20 4in1 ESC
1x Wiring Set


NeutronRC

NeutronRC G071 50A 32Bit 2-6S 30x30 4in1 ESC

NEUTRONRC

The NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC is the perfect solution for drone pilots who need an efficient, reliable, and programmable ESC. This ESC features a 32-bit processor, 50A current limit, 2-6S LiPo compatibility, and 30x30 mounting, making it the ideal choice for your quad.





















Check out all our 30x30 ESCs and our NeutronRC collection!
Features


Main control chip: STM32G071 main control chip, operating frequency up to 64MHz, three-in-one IC drive, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pad adopts an electroplating copper process to avoid the pad from falling off during use. 3 oz thick copper, 4+4 double-layer board design, greatly reduces heat, thus improving efficiency.


High-performance 50A ESC: Integrating 4 high-performance 50A ESCs, the integration level is so high, the volume is only about the size of a horizontal wire machine, and the installation and wiring become very simple. This unbelievable size and volume is designed for racing-grade crossovers.


Rich functions: adopt BLHeli_32 firmware (optional AM32 firmware), powerful performance, rich functions, support multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, use other development boards, or Use cleanflight or Betaflight firmware to setup or upgrade ESCs).


PWM hardware drive motor: PWM hardware drive motor, low noise, smoother throttle response. Damped Light technology and regenerative braking function make the deceleration of the motor more sensitive and effective, and the control is more precise. Active power-renewal technology restores battery power and prolongs sailing time.


Anti-interference and fast response: not only supports ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high-temperature resistant, and easy to weld.

Specifications

Item Type: 4 in 1 50A ESC
Weight: Approx. 15g
Material: electronic components
Color: Black+Blue
ESC size: about 42 x 40 mm
Fixing hole: Approx. 30.5 x 30.5 mm/1.2 x 1.2 inches
Fixed aperture: M3
Working voltage: 2-6S
Maximum continuous working current: 50A
Maximum instantaneous current: 60A
Supports: DSHOT150, 300, 600, PWM, Oneshot125, Oneshot42 and Multshot
Software: BLHeliSuite/AM32
Firmware version: BLHeli32 32.9(96K)
Application: Suitable for unmanned remote control drones and FPV vehicles, etc.

Includes

1x NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC


Wiring Diagram 
 

The NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC is the perfect solution for drone pilots who need an efficient, reliable, and programmable ESC. This ESC features a 32-bit processor, 50A current limit, 2-6S LiPo compatibility, and 30x30 mounting, making it the ideal choice for your quad. Check out all our 30x30 ES

NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC

NeutronRC G071 BL32 32Bit 50A 2-6S 30x30 4in1 ESC from WREKD Co.

NeutronRC 50A 8Bit 2-6S 30x30 4in1 ESC


A budget-friendly option for those looking for powerful 50A 4in1 30x30 ESC for their builds!
Check out all our 30x30 ESCs and our NeutronRC collection!
Features


Main control chip: EMF8BB21F16G main control chip, operating frequency up to 48MHz, three-in-one IC drive, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pad adopts an electroplating copper process to avoid the pad falling off during use. 3 oz thick copper, 4+4 double-layer board design, greatly reduces heat, thus improving efficiency.


High-performance 50A ESC: Integrating 4 high-performance 50A ESCs, the integration level is so high, the volume is only about the size of a horizontal wire machine, and the installation and wiring become very simple. This unbelievable size and volume is designed for racing-grade crossovers.


Rich functions: adopt BLHeli‑S firmware (optional Blujey firmware), powerful performance, rich functions, support multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, use other development boards, or Use cleanflight or Betaflight firmware to setup or upgrade ESCs).


PWM hardware drive motor: PWM hardware drive motor, low noise, smoother throttle response. Damped Light technology and regenerative braking function make the deceleration of the motor more sensitive and effective, and the control is more precise. Active power-renewal technology restores battery power and prolongs sailing time.


Anti-interference and fast response: not only supports ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high-temperature resistant, and easy to weld.


Specifications

Item Type: 4 in 1 50A ESC

Weight: Approx. 15g/

Material: electronic components

Colour: Black+Green

ESC size: about 42 x 40 mm

Fixing hole: Approx. 30.5 x 30.5 mm/1.2 x 1.2 inches

Fixed aperture: M3

Working voltage: 2-6S

Maximum continuous working current: 50A

Maximum instantaneous current: 60A

Supports: DSHOT150, 300, 600, PWM, Oneshot125, Oneshot42 and Multshot

Software: BLHeliSuite/Blujey

Firmware version: BL16.7

Application: Suitable for unmanned remote control drones and FPV vehicles, etc.

Includes


1x NeutronRC BLS 8Bit 50A 2-6S 30x30 4in1 ESC

Wiring Diagram 


A budget-friendly option for those looking for powerful 50A 4in1 30x30 ESC for their builds! Check out all our 30x30 ESCs and our NeutronRC collection! Features Main control chip: EMF8BB21F16G main control chip, operating frequency up to 48MHz, three-in-one IC drive, imported high-quality high-frequency ceramic capacit

NeutronRC BLS 8Bit 50A 2-6S 30x30 4in1 ESC from WREKD Co.

NeutronRC BLS 8Bit 50A 2-6S 30x30 4in1 ESC

HGLRC

HGLRC SPECTER 60A 8Bit 2-6S 30x30 4in1 ESC

This budget-friendly ESC is super easy to use with its large pads. Plus, the immersion gold high-tech design is temperature-resistant and current-resistant for long-term durability, Capable of supporting up to 60A of power and up to 70A burst current! 
Interested in the HGLRC SPECTER F405 V2 2-6S 30x30 Flight Controller - MPU6000?
 Check out our other 30x30 ESCs and all our HGLRC products!
Features

Blheli_S firmware can be replaced with Bluejay firmware to make RPM filters available. 
2S capable

Is capable of supporting 70A burst current for up to 10 Seconds 
Budget-friendly price point


 Specifications

Input Voltage: 2-6S Lipo (7.4V-22.8V)

Installing Hole: 30.5x30.5mm, M3

Support Protocols: DShot600/300/150/Oneshot125/42,MultiShot

Constant Current: 60A

Peak Current: 70A（10s）

ESC Firmware: BL_S (J-H-30)

Size: 37x42.7mm

Includes

1x HGLRC SPECTER 8Bit 60A 3-6S 30x30 4in1 ESC
1x Accessories  


This budget-friendly ESC is super easy to use with its large pads. Plus, the immersion gold high-tech design is temperature-resistant and current-resistant for long-term durability, Capable of supporting up to 60A of power and up to 70A burst current!  Interested in the HGLRC SPECTER F405 V2 2-6S 30x30 Flight Controlle

HGLRC SPECTER 8Bit 60A 2-6S 30x30 4in1 ESC

The HGLRC Specter 60A BL32 3-6S 4-in-1 ESC is a robust and high-performance electronic speed controller designed for demanding drone applications. 

HGLRC Specter 60A BLHeli_32 3-6S 4-in-1 ESC

HGLRC SPECTER 8Bit 60A 2-6S 30x30 4in1 ESC from WREKD Co.

HAKRC

HAKRC HK3220 60A 32Bit 2-8S 20x20 4in1 ESC

The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Check out the rest of our 20x20 ESCs, as well as HAKRC products for sale at RaceDayQuads!
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.

MOS adopts imported high current resistance MOS, long life with strong load capacity.

Adopt industrial grade LDO, high temperature resistance.

Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance

PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications


ESC firmware: HAKRC_AT4G_Multi_32.9 Hex


Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600


Input voltage: 2S-8S Lipo


Continuous current: 60A

Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable 

4x M3 Grommets.

4x M2 Grommets


The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active F

HAKRC HK3220 32Bit 60A 2-8S 20x20 4in1 ESC

WREKD General

The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.
MOS adopts imported high current resistance MOS, long life with strong load capacity.
Adopt industrial grade LDO, high temperature resistance.
Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance
PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications

ESC firmware: HAKRC_AT4G_Multi_32.9 Hex
Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-8S Lipo
Continuous current: 60A
Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable
4x M3 Grommets.
4x M2 Grommets


HAKRC HK3220 32Bit 60A 2-8S 20x20 4in1 ESC from WREKD Co.

The HAKRC HK3220 2-8S BLHELI_32 60A 4in1 20x20 ESC is an advanced ESC featuring a AT32F421 main control chip with operating frequency of up to 128MHz, Japan imported MOS and 3-in-1 IC driver FD6288Q driver, imported Murata capacitors, 8-layer 2-ounce copper PCB, hardware PWM drives, Damped Light technology and Active Freewheeling technology for smoother throttle response, regenerative braking and power recycling.
Check out the rest of our 20x20 ESCs, as well as HAKRC products for sale at WREKD!
Features

PCB adopts high-end 8-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.

MOS adopts imported high current resistance MOS, long life with strong load capacity.

Adopt industrial grade LDO, high temperature resistance.

Using 40 50V high-quality Japanese Murata capacitors, strong filtering performance

PWM frequency up to 128k, high frequency for higher throttleRuns smoother.

Specifications


ESC firmware: HAKRC_AT4G_Multi_32.9 Hex


Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600


Input voltage: 2S-8S Lipo


Continuous current: 60A

Peak current: 70A
Size: 34 x 42mm (20mm-20mm mounting hole)
Product net weight: 11g

Includes

1x HAKRC HK3220 BLHELI_32Bit 60A 2-8S 20x20 4in1 ESC
1x XT60 Connector
1x 12AWG 6cm Power Cable
1x 35V 470uF Capacitor
1x 8Pin JST ESC to FC cable 

4x M3 Grommets.

4x M2 Grommets


Diatone

Diatone Mamba F40 Mini 40A 128k 32Bit 2-6S 20x20 4in1 ESC

128K is the next big thing in speed controllers and this is Diatone's answer to the new Hype! Check out all our 20x20 4in1 ESCs and our wide collection of Diatone products! Specifications: INPUT VOLTAGE: 2~6S Lipo (8.4V~25.2V) CONTINUE CURRENT:40A×4 BURST CURRENT:45A (10S) BEC: No Target：BLHeli_32 MAMBA F40_128K_MINI S

Diatone MAMBA F40_128K BL32 MINI 4IN1 ESC 40A 6S - 20x20mm

The&nbspDiatone Mamba Mini F40 40A ESC&nbspbrings BIG power all in a 20x20 mounting size! This ESC can push 40A all while bringing you the latest features! This is the&nbsp128K&nbspversion.

The Diatone Mamba Mini F40 40A ESC brings BIG power all in a 20x20 mounting size! This ESC can push 40A all while bringing you the latest features! This is the 128K version.

Diatone Mamba Mini 128K 6S BLHeli_32 4-in-1 ESC - F40 40A

Elevate your drone&#39s performance with the Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 20x20 4in1 ESC, a pinnacle of ESC technology designed to revolutionize your flying experience.Specifications:Input Voltage: 2~6SMax Continuous Current: 40AMax Burst Current: 45ABEC: NoTarget: BLHeli_32 MAMBA F40_128K_MINIProtocol: Dshot300/600/1200PWM Range: 24~128KTVS Protection: YesMounting Pattern: 20x20 M2/M3Included:Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 4in1 ESC2x 8pin sh1.0 connectors1x AMASS XT60 connector1x High-Frequency 470uF/35V CapacitorExperience a new level of control and precision with this ESC, featuring an input voltage range of 2 to 6S, ensuring compatibility across various setups. Delivering a continuous current of 40A and a burst current of 45A, it guarantees reliability and power for high-performance flights.Harness the power of the BLHeli_32 MAMBA F40_128K_MINI target and Dshot300/600/1200 protocols for seamless integration and excep...

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

Diatone Mamba F40 Mini 128k 32bit 40a 2-6s 20x20 4in1 ESC - www.readymaderc.com

Diatone Mamba F40 Mini 128k 32bit 40A 2-6S 20x20 4in1 ESC

DIATONE

Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build.
Check out the rest of our 4in1 ESCs and Diatone gear!
Specifications

Input Voltage: 2~6S
Max Continuous Current: 40A
Max Burst Current: 45A 
BEC: No

Target：BLHeli_32 MAMBA F40_128K_MINI

Protocol: Dshot300/600/1200

PWM Range: 24~128K

TVS Protection: Yes
Mounting Pattern: 20x20 M2/M3

Includes

Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 4in1 ESC
2x 8pin sh1.0
1x AMASS XT60
1x High-Frequency 470uF/35V Capacitor


Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input Voltage: 2~6S Max Continuous Current: 40A Max Burst Cur

Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 20x20 4in1 ESC

DiatoneUSA

Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone&#39s consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build.
Check out the rest of our 4in1 ESCs and Diatone gear!
Specifications

Input Voltage: 2~6S
Max Continuous Current: 40A
Max Burst Current: 45A 
BEC: No

Target：BLHeli_32 MAMBA F40_128K_MINI

Protocol: Dshot300/600/1200

PWM Range: 24~128K

TVS Protection: Yes
Mounting Pattern: 20x20 M2/M3

Includes

Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 4in1 ESC
2x 8pin sh1.0
1x AMASS XT60
1x High-Frequency 470uF/35V Capacitor


Diatone Mamba F40 Mini 128k 32Bit 40A 2-6S 20x20 4in1 ESC from WREKD Co.

Diatone Mamba F30 Mini 30A 2-5S 20x20 4in1 ESC

Replacement ESC for Diatone MK2 MINI stack MAMBA F30HV 30A 3-5S 4 in 1 BLHeli_S Dshot600 ESC For RC FPV Racing Drone Upgrade of MAMBA F25 MK2 HV 2-4S 4 IN 1 BLHELI_S 20*20mm Check out all our Stacks and the rest of our Diatone Products! Specification: Mamba F30 ESC Item name: Mamba F25HV ESC  Input voltage: 2~5S (7.4V~

Diatone Mamba F30MINI 2-5S 4IN1 BLHELI_S DSHOT600 Electronic Speed Controller - 20x20mm

Spare replacement part for Diatone Mamba F405 Mini Stacks.
Check out the rest of our 4in1 ESCs and Diatone gear!
Specifications

Input voltage: 2-5S
Continuous Current :30A
Peak Current: 40A
ESC Firmware: BLHeli_S
Agreement: DShot 300/600
BEC: NO
Size: 29.0×29.0×5.5mm
Mounting: 20x20,M2
Weight: 6g

Includes 

1x Diatone Mamba F30 Mini 30A 20x20 4in1 ESC


Spare replacement part for Diatone Mamba F405 Mini Stacks. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input voltage: 2-5S Continuous Current :30A Peak Current: 40A ESC Firmware: BLHeli_S Agreement: DShot 300/600 BEC: NO Size: 29.0×29.0×5.5mm Mounting: 20x20,M2 Weight: 6g Includes  1x Diatone M

Diatone Mamba F30 Mini 30A 2-5S 20x20 8Bit 4in1 ESC from WREKD Co.

Diatone Mamba F30 Mini 30A 2-5S 20x20 8Bit 4in1 ESC

CLRacing

CLRacing V2 32Bit 45A 2-6S 30x30 4in1 ESC

CLRACING

Check out this ESC with 32Bit for processing and 45Amps to work with, making this 30x30 4in1 board a great choice for your builds. Also this is the replacement ESC for the CLRACING F7/4in1 stack combo. If used with other flight controllers please make sure you have the correct harness pinout to avoid damaging your flight controller. 
Check out all our 30x30 ESCs and our full range of CLRacing products! 

Specifications

Input Voltage: 2-6S

Max. Continuous Current: 45A
Max. Burst Current: 55A 
Firmware: BLHeli_32
Support: Dshot300-1200/MultiShot/OneShot/ProShot/PMW
Current Sensor: Yes

Current Sensor Scale: 250
Dimensions 43.5mm x 46.5mm
Mounting Dimensions: 30.5x30.5mm Φ4mm
Size : 43.5mm x 46.5mm
Weight: 13.5g

Includes

1x CLRacing 32Bit 45A V2 2-6S 30x30 4in1 ESC
10x M3x5mm nylon thread through spacers
5x M3x25mm nylon screws
5x M3 nylon nuts
5x Yellow Grummits
2x 14 AWG 80mm Silicone wires
1x connection cable
1x Amass XT60
1x Rubycon 1000uf 35v ZLH capacitor



Check out this ESC with 32Bit for processing and 45Amps to work with, making this 30x30 4in1 board a great choice for your builds. Also this is the replacement ESC for the CLRACING F7/4in1 stack combo. If used with other flight controllers please make sure you have the correct harness pinout to avoid damaging your flig

CLRacing 32Bit 45A V2 2-6S 30x30 4in1 ESC

CL Racing

CLRacing 32Bit 45A V2 2-6S 30x30 4in1 ESC from WREKD Co.

Replacement ESC for the CLRACING F7/4in1 stack combo.Can also be used with other flight controllers.If used with other flight controller please make sure you have the correct harness pinout to avoid damging your flight controller.This DIY kit is very handy for making your own harness.Main ESC Features LIPO: 2-6S LIPO W

CLRACING 4in1 45A 32Bit ESC - 30x30mm

iFlight BLITZ E55 55A 32Bit 2-6S 30x30 4in1 ESC

﻿The next generation of ESC's from iFlight have arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new 55 Amp BLHeli 32 Blitz 4-in-1 ESC's can handle even the most amp hungry motors. Check out all our 30x30 Electronic Speed Controllers and the rest of our iFlight Products! Specificatio

iFlight Blitz E55 55A 2-6S ESC - 30x30mm

The next generation of ESCs from iFlight has arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new 55 Amp BLHeli 32 Blitz 4-in-1 ESCs can handle even the most amp-hungry motors.
Check out all our 30x30 ESCs and all our iFlight gear selection!
Specifications


Input Voltage: 2-6S

Max. Continuous Current: 55A
Max. Burst Current: 65A 
MCU: G071
BEC: No
Firmware: BLHeli32
Current Sensor: Yes
Target: IFLIGHT_BLITZ_G2
Mounting Dimensions: 30.5x30.5mm/Φ4mm
Dimensions: 35x42mm
 Weight: 15.3g 

Includes

1x iFlight Blitz E55 55A 2-6S 30x30 4in1 ESC
1x Wiring Set


The next generation of ESCs from iFlight has arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new 55 Amp BLHeli 32 Blitz 4-in-1 ESCs can handle even the most amp-hungry motors. Check out all our 30x30 ESCs and all our iFlight gear selection! Specifications Input Voltage: 2-6S Max. Co

iFlight Blitz E55 32Bit 55A 2-6S 30x30 4in1 ESC

iFlight Blitz E55 32Bit 55A 2-6S 30x30 4in1 ESC from WREKD Co.

iFlight BLITZ E45S 45A 2-6S 30x30 4in1 ESC

Another great addition to iFlight's ESC lineup. With 2-6S input, up to 55A bursts, and an integrated capacitor, the iFlight BLITZ E45S 45A 2-6S 30x30 4in1 ESC is a great value option for a 30x30 ESC.
Check out all our 30x30 ESCs and all out iFlight gear selection!
Specifications

Input Voltage: 2-6S

Max. Continuous Current: 45A
Max. Burst Current: 55A 
Firmware: BLHeli_S
MCU: BB21
Target: QH-40 16.7
BEC: No
Telemetry Output: No
Current Sensor: Yes
Current Sensor Scale: 200
Dimensions 40.5x42x6.5mm
Mounting Dimesions: 30.5x30.5mm Φ4mm

Weight: 14.7g


Includes

1x iFlight Blitz E45S 45A 2-6S 30x30 4in1 ESC
1x Wiring Set


Don't miss the iFlight BLITZ E45S 45A 2-6S 30x30 4in1 ESC, a great value option for any build. This affordable offers up to 55A bursts for pure performance.

iFlight Blitz E45S 45A 2-6S 30x30 4in1 ESC

iFlight BLITZ E45S 45A 2-6S 30x30 4in1 ESC for Sale - RaceDayQuads

The next generation of ESC's from iFlight have arrived. These new 45 Amp BLHeli_S Blitz 4-in-1 ESC's can handle even the most amp hungry motors. Check out all our 30x30 Electronic Speed Controllers and the rest of our iFlight Products! Specification: Mounting Holes: 30.5*30.5mm/Φ4mm Weight: 14.7g Supports 2-6S lipo inp

iFlight Blitz E45S 45A 2-6S BLHeli_S ESC - 30x30mm

Another great addition to iFlight&#39s ESC lineup. With 2-6S input, up to 55A bursts, and an integrated capacitor, the iFlight BLITZ E45S 45A 2-6S 30x30 4in1 ESC is a great value option for a 30x30 ESC.
Check out all our 30x30 ESCs and all out iFlight gear selection!
Specifications

Input Voltage: 2-6S

Max. Continuous Current: 45A
Max. Burst Current: 55A 
Firmware: BLHeli_S
MCU: BB21
Target: QH-40 16.7
BEC: No
Telemetry Output: No
Current Sensor: Yes
Current Sensor Scale: 200
Dimensions 40.5x42x6.5mm
Mounting Dimesions: 30.5x30.5mm Φ4mm

Weight: 14.7g


Includes

1x iFlight Blitz E45S 45A 2-6S 30x30 4in1 ESC
1x Wiring Set


Another great addition to iFlight's ESC lineup. With 2-6S input, up to 55A bursts, and an integrated capacitor, the iFlight BLITZ E45S 45A 2-6S 30x30 4in1 ESC is a great value option for a 30x30 ESC. Check out all our 30x30 ESCs and all out iFlight gear selection! Specifications Input Voltage: 2-6S Max. Continuous Curr

iFlight Blitz E45S 45A 2-6S 30x30 4in1 ESC from WREKD Co.

Flywoo

Flywoo GOKU BS 35A 2-6S 16x16 4in1 ESC

Lighten up your quad stack with the Flywoo GOKU BS 35A 16x16 4-in-1 ESC. Gaining more power output.

Flywoo GOKU BS 35A 16x16 4-in-1 ESC

HAKRC 32Bit 35A 2-5S ESC

The BLHeli_32 Bit 35A 2-5S ESC by HAKRC supports 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150/300/600/1200.

HAKRC BLHeli_32 Bit 35A 2-5S ESC

HAKRC 45A 2-6S 4in1 ESC

The HAKRC 45A 2-6S BLHeli_S 4-in-1 ESC provides great power and value in a 20x20mm/30.5x30.5mm mounting pattern.

HAKRC 45A 2-6S BLHeli_S 4-in-1 ESC

HAKRC 35A 2-6S 20x20 4in1 ESC

The HAKRC 35A 2-6S BLHeli_S 20x20 4-in-1 ESC provides great power and value in a 20x20mm mounting pattern.

HAKRC 35A 2-6S BLHeli_S 20x20 4-in-1 ESC

Lumenier

Lumenier Razor Pro F3 32Bit 45A 2-6s ESC

The highly advanced Lumenier Razor Pro F3 BLHeli_32 45A 2-6s ESC. A small premium ESC packed full of features like RGB LED, current sensor, high amperage FETs, telemetry and more.

Lumenier Razor Pro F3 BLHeli_32 45A 2-6s ESC

XILO

XILO 40A 2-4s ESC

The XILO BLHeli_S 40A ESC is a low cost, affordable ESC that features BLHeli_S firmware capable of running up to DSHOT 600. 

XILO 40A BLHeli_S 2-4s ESC

Aikon AK32 35A 6S 32Bit 4in1 ESC

BL32 is the latest in ESC technology, allowing for smoother motor output and precise throttle resolution. The AK32 combines the newest innovations with proven a proven 4-in-1 ESC form factor and reliability that AIKON is known for.   Features:  - Imported high-quality MOSFET up to 40V  - High stability at 6S LIPO input

AIKON AK32 35A 4in1 32 BIT ESC V3 - 30x30mm

The Aikon AK32 35A 4-in-1 ESC comes with an STM32F051 processor with the latest BLHeli_32 firmware. It supports 2-6s input and comes with a current sensor to monitor the current output. 

Aikon AK32 4-in-1 35A 6S BLHeli32 ESC

Frame Stack Mount

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 