FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Flite Test

Flite Test FT EZ ID - Remote ID Module

FT EZ ID was created to not only provide compliance with current FAA regulations, but also bring features that many will find valuable and useful in everyday flying activity. - 100% both designed and manufactured in the United States, thanks to a tremendous amount of hard work between Flite Test, Tritium Electronics, a

Flite Test FT EZ ID - Remote ID Module w/ Plug

FT EZ ID was created to not only provide compliance with current FAA regulations, but also bring features that many will find valuable and useful in everyday flying activity. FT EZ ID is 100% both designed and manufactured in the United States.

Flight Controller Part Type

Flight Controller Parts and Other Electronics

HolyBro

Holybro Pix32 V6 Baseboard

Holybro

The Holybro Pix32 V6 Baseboard carries the Holybro Pix32 V6 Flight Controller. It connects with a 100-pin connector.

Pololu

Pololu Step-Down Voltage Regulator 

The Pololu 12V, 2.4A Step-Down Voltage Regulator is a synchronous switching step-down (or buck) regulator that takes an input voltage of up to 50V and efficiently reduces it to 12V.

Pololu 12V, 2.4A Step-Down Voltage Regulator

The Pololu 9V, 2.6A Step-Down Voltage Regulator is a synchronous switching step-down (or buck) regulator that takes an input voltage of up to 50V and efficiently reduces it to 9V.

Pololu 9V, 2.6A Step-Down Voltage Regulator

The compact (0.5″ × 0.7″) D24V10F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 1 A.

Pololu 12V, 1A Step-Down Voltage Regulator

The&nbspPololu 12V, 4.5A Step-Down Voltage Regulator&nbspis&nbspa powerful step-down (or buck) regulator that takes an input voltage of up to 50&nbspV and efficiently reduces it to&nbsp12&nbspV.&nbsp

The Pololu 12V, 4.5A Step-Down Voltage Regulator is a powerful step-down (or buck) regulator that takes an input voltage of up to 50 V and efficiently reduces it to 12 V. 

Pololu 12V, 4.5A Step-Down Voltage Regulator

The Pololu 5V, 3.2A Step-Down Voltage Regulator is a synchronous switching step-down (or buck) regulator that takes an input voltage of up to 50V and efficiently reduces it to 5V.

Pololu 5V, 3.2A Step-Down Voltage Regulator

This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages between 4 V and 50 V and efficiently reduces them to a lower, user-adjustable voltage set by an on-board trimmer potentiometer. 

Pololu 2.5-7.5V 600mA Step-Down Voltage Regulator

The&nbspPololu 9V, 5A Step-Down Voltage Regulator&nbspis a&nbsppowerful step-down (or buck) regulator that takes an input voltage of up to 50&nbspV and efficiently reduces it to&nbsp9&nbspV.

The Pololu 9V, 5A Step-Down Voltage Regulator is a powerful step-down (or buck) regulator that takes an input voltage of up to 50 V and efficiently reduces it to 9 V.

Pololu 9V, 5A Step-Down Voltage Regulator

This&nbspPololu 5V, 5A Step-Down Voltage Regulator&nbspis a step-down (buck) regulator that generates a fixed 5 V output from input voltages up to 38 V.

This Pololu 5V, 5A Step-Down Voltage Regulator is a step-down (buck) regulator that generates a fixed 5 V output from input voltages up to 38 V.

Pololu 5V, 5A Step-Down Voltage Regulator

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V.

Pololu 9V, 2.5A Step-Down Voltage Regulator

The&nbspPololu 5V, 5.5A Step-Down Voltage Regulator is a&nbspstep-down (or buck) regulator that takes an input voltage of up to 50&nbspV and efficiently reduces it to&nbsp5V.&nbsp

The Pololu 5V, 5.5A Step-Down Voltage Regulator is a step-down (or buck) regulator that takes an input voltage of up to 50 V and efficiently reduces it to 5V. 

Pololu 5V, 5.5A Step-Down Voltage Regulator

Holybro H-RTK F9P Base

Unlike the H-RTK F9P Helical, the&nbspH-RTK F9P Base&nbspby Holybro is equipped with a high-gain antenna. This model is best suited to use as a base station.&nbsp

Unlike the H-RTK F9P Helical, the H-RTK F9P Base by Holybro is equipped with a high-gain antenna. This model is best suited to use as a base station. 

Holybro Pixhawk PM02 V3 12S Power Module 

The PM02 Power Module is a simple way of providing the autopilot's flight controller with clean power from a LiPo battery, as well as current consumption and battery voltage measurements all through a 6-pos cable. The PM02 Power Module is designed to power an autopilot flight controller, an RC receiver, and APM accessories (GPS, radio).&nbsp

The PM02 Power Module is a simple way of providing the autopilot's flight controller with clean power from a LiPo battery, as well as current consumption and battery voltage measurements all through a 6-pos cable. The PM02 Power Module is designed to

Matek

Matek CAN-L431 AP Periph CAN Node

Matek Systems

The Mateksys CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware.

MATEKSYS AP Periph CAN Node - CAN-L431

FETtec

FETtec KISS OSD Board

The FETtec OSD Board allows on-screen display of important data, as well as full-tuning of KISS parameters. Suitable for FETtec and KISS flight controllers.&nbsp&nbsp

The FETtec OSD Board allows on-screen display of important data, as well as full-tuning of KISS parameters. Suitable for FETtec and KISS flight controllers.  

FETtec OSD Board

OSD board for FETtec and KISS flight controllers. Allows on-screen display of important data as well as full tuning of KISS parameters.Check out our FC Accessories and the rest of our FETTEC Products! Specifications: Graphic OSD (STM32) Full KISS Tuning  Filter (PIDs, Rates, Settings) LED control (RGB LED, Racewire) VT

FETTEC OSD BOARD

Skystars

Skystars 4-36V to 9V 2A Step Down Voltage Regulator

SkyStars

A compact and simple voltage regulator that takes 4-36 volts input and steps the voltage down to 9V.

Skystars 2A Step Down Voltage Regulator (4-36V to 9V)

Skystars 4-36V to 5V 2A Step Down Voltage Regulator

A compact and simple voltage regulator that takes 4-36 volts input and steps the voltage down to 5V and can supply up to 2 amps for any of your 5 volt devices. Check out all our BEC/PDB section and the rest of our Skystars Products! Specifications: Brand name: Skystars RC Item Name: Step Down Voltage Regulator Input vo

Skystars RC 4-36V to 5V 2A Step Down Voltage Regulator

The&nbspSkyStars Mini 2A Step-Down Voltage Regulator Module&nbspis a&nbspcompact and simple voltage regulator that takes 4-36 volts input and steps the voltage down to 5V.&nbspSupplies up to 2A of power for any of your 5-volt devices.

The SkyStars Mini 2A Step-Down Voltage Regulator Module is a compact and simple voltage regulator that takes 4-36 volts input and steps the voltage down to 5V. Supplies up to 2A of power for any of your 5-volt devices.

SkyStars Mini 2A Step-Down Voltage Regulator Module - 5V (DC4-36V to DC5V)

Matek CRSF-PWM-C CRSF to PWM converter

MATEK

If you want to use your crossfire with a PWM system then Matek has the solution that you've been waiting for. This board allows you to attack your CRSF receiver and use PWM pins to connect to your wing or plane. Perfect for those who want the stability of a plane or wing, but also want the dependable long range of the crossfire.
Check out the rest of our transmitters and accessories. as well as all of our Matek selection!
Specifications

Compatible with CRSF protocol receiver only
Support any CRSF protocol receivers(including 433MHz, 868MHz, 915MHz, 2.4GHz)
10x PWM outputs
PWM frequency configurable (50Hz default, 100,160,330, 400Hz)
2x UARTs (for Receiver and GPS)
Telemetry ID: RxBt, Curr, Capa, Bat%, GPS, GSpd, Hdg, Alt, Sats
36V Max. battery voltage sense (1K:10K voltage divider built-in)
Current sensor built-in (90A continuous /220A Peak),  current scale = 150 by default
Vbat and Current sensor scale configurable
Failsafe value auto set
Firmware upgradeable
Rated voltage: 4~9V @5V pad, 0~36V @BAT+
No 5V regulator built-in
26mm x 26mm, 2.8g
Packing: 1x CRSF-PWM-C,  1x low ESR capacitor,  Dupont 2.54 pins

Includes

1x Matek CRSF-PWM-C CRSF to PWM converter

Wiring Diagram


If you want to use your crossfire with a PWM system then Matek has the solution that you've been waiting for. This board allows you to attack your CRSF receiver and use PWM pins to connect to your wing or plane. Perfect for those who want the stability of a plane or wing, but also want the dependable long range of the crossfire.

Matek CRSF-PWM-C CRSF to PWM converter - For Sale At RaceDayQuads

If you want to use your crossfire with a PWM system then Matek has the solution that you&#39ve been waiting for. This board allows you to attack your CRSF receiver and use PWM pins to connect to your wing or plane. Perfect for those who want the stability of a plane or wing, but also want the dependable long range of the crossfire.
Check out the rest of our transmitters and accessories. as well as all of our Matek selection!
Specifications

Compatible with CRSF protocol receiver only
Support any CRSF protocol receivers(including 433MHz, 868MHz, 915MHz, 2.4GHz)
10x PWM outputs
PWM frequency configurable (50Hz default, 100,160,330, 400Hz)
2x UARTs (for Receiver and GPS)
Telemetry ID: RxBt, Curr, Capa, Bat%, GPS, GSpd, Hdg, Alt, Sats
36V Max. battery voltage sense (1K:10K voltage divider built-in)
Current sensor built-in (90A continuous /220A Peak),  current scale = 150 by default
Vbat and Current sensor scale configurable
Failsafe value auto set
Firmware upgradeable
Rated voltage: 4~9V @5V pad, 0~36V @BAT+
No 5V regulator built-in
26mm x 26mm, 2.8g
Packing: 1x CRSF-PWM-C,  1x low ESR capacitor,  Dupont 2.54 pins

Includes

1x Matek CRSF-PWM-C CRSF to PWM converter

Wiring Diagram


If you want to use your crossfire with a PWM system then Matek has the solution that you've been waiting for. This board allows you to attack your CRSF receiver and use PWM pins to connect to your wing or plane. Perfect for those who want the stability of a plane or wing, but also want the dependable long range of the 

Matek CRSF-PWM-C CRSF to PWM converter from WREKD Co.

 Matek's Industry first CRSF to PWM (Crossfire to Servo) protocol converter adapter boards.The Matek CRSF-PWM-C converter board has 10 PWM servo outputs. Has built-in 90A continuous current sensor. Check out our ExpressLRS Collection, all our Receivers and the rest of our Matek products! Specifications:   Pinouts and P

Matek CRSF To PWM Converter CRSF-PWM-C

The&nbspMATEKSYS CRSF PWM C&nbspis a Crossfire to PWM Converter with 2 UARTS and&nbsp10 PWM Outputs.&nbsp This converter supports any Crossfire Protocol receivers, such as the&nbsp433MHz, 868MHz, 915MHz, or 2.4GHz.

The MATEKSYS CRSF PWM C is a Crossfire to PWM Converter with 2 UARTS and 10 PWM Outputs.  This converter supports any Crossfire Protocol receivers, such as the 433MHz, 868MHz, 915MHz, or 2.4GHz.

MATEKSYS Crossfire to PWM Converter - CRSF PWM C

Matek CRSF-PWM-6 CRSF to PWM converter

 Matek's Industry first CRSF to PWM (Crossfire to Servo) protocol converter adapter boards.The Matek CRSF-PWM-6 has 6 PWM servo outputs. Has integrated voltage sensor and external current sensor can be connected. PWM output frequency can be adjusted for faster servos (50Hz default, 100, 160, 330, 400Hz) Check out our E

Matek CRSF To PWM Converter CRSF-PWM-6

If you want to use your TBS Crossfire receivers with a PWM system then Matek has the solution that you&#39ve been waiting for. This board allows you to attach your CRSF receiver and use PWM pins to connect to your wing or plane. This is perfect for those who want the stability of a plane or wing, but also want the dependable long range of the crossfire.
Check out the rest of our transmitters and accessories. as well as all of our Matek selection!
Specifications

Compatible with CRSF protocol receiver only
Support any CRSF protocol receivers(including 433MHz, 868MHz, 915MHz, 2.4GHz)
6x PWM outputs
PWM frequency configurable (50Hz default, 100,160,330, 400Hz)
2x UARTs (for Receiver and GPS)
Telemetry ID: RxBt, Curr, Capa, Bat%, GPS, GSpd, Hdg, Alt, Sats
36V Max. battery voltage sense (1K:10K voltage divider built-in)
Compatible with external Current sensor (0~3.3V)
Vbat and Current sensor scale configurable
Failsafe value auto set
Firmware upgradeable
Rated voltage: 4~9V @5V pad, 0~36V @Vbat, 0~3.3V @Curr
No 5V regulator built-in
25mm x 16mm, 1.3g
Packing: 1x CRSF-PWM-6, Dupont 2.54 pins

Includes

1x Matek CRSF-PWM-6 CRSF to PWM converter

Wiring Diagram


If you want to use your TBS Crossfire receivers with a PWM system then Matek has the solution that you've been waiting for. This board allows you to attach your CRSF receiver and use PWM pins to connect to your wing or plane. This is perfect for those who want the stability of a plane or wing, but also want the dependa

Matek CRSF-PWM-6 CRSF to PWM converter from WREKD Co.

If you want to use your TBS Crossfire receivers with a PWM system then Matek has the solution that you've been waiting for. This board allows you to attach your CRSF receiver and use PWM pins to connect to your wing or plane. This is perfect for those who want the stability of a plane or wing, but also want the dependable long range of the crossfire.
Check out the rest of our transmitters and accessories. as well as all of our Matek selection!
Specifications

Compatible with CRSF protocol receiver only
Support any CRSF protocol receivers(including 433MHz, 868MHz, 915MHz, 2.4GHz)
6x PWM outputs
PWM frequency configurable (50Hz default, 100,160,330, 400Hz)
2x UARTs (for Receiver and GPS)
Telemetry ID: RxBt, Curr, Capa, Bat%, GPS, GSpd, Hdg, Alt, Sats
36V Max. battery voltage sense (1K:10K voltage divider built-in)
Compatible with external Current sensor (0~3.3V)
Vbat and Current sensor scale configurable
Failsafe value auto set
Firmware upgradeable
Rated voltage: 4~9V @5V pad, 0~36V @Vbat, 0~3.3V @Curr
No 5V regulator built-in
25mm x 16mm, 1.3g
Packing: 1x CRSF-PWM-6, Dupont 2.54 pins

Includes

1x Matek CRSF-PWM-6 CRSF to PWM converter

Wiring Diagram


Matek CRSF-PWM-6 CRSF to PWM converter - For Sale At RaceDayQuads

The&nbspMATEKSYS CRSF PWM 6&nbspis a Crossfire to PWM Converter with 2 UARTS and 6 PWM Outputs.&nbsp This converter supports any Crossfire Protocol receivers, such as the 433MHz, 868MHz, 915MHz, or 2.4GHz.

The MATEKSYS CRSF PWM 6 is a Crossfire to PWM Converter with 2 UARTS and 6 PWM Outputs.  This converter supports any Crossfire Protocol receivers, such as the 433MHz, 868MHz, 915MHz, or 2.4GHz.


MATEKSYS Crossfire to PWM Converter - CRSF PWM 6

ViFly

ViFly Strobe Anti Collision Drone Light

VIFLY Strobe uses 5 3W Hi-intensity LED which provides the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA guidelines, a must-have accessory for your safe flying at night. Each color has 3 modes, strobe, slow flash, and solid. You can use 3 white LEDs for the FAA 3-mile visibility 

VIFLY Strobe uses 5 3W Hi-intensity LED which provides the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA guidelines, a must-have accessory for your safe flying at night. Each color has 3 modes, strobe, slow flash, and solid. You can use 3 white LEDs for the FAA 3-mile visibility request and a green/red LED for maintaining Line of sight (LOS). The strobe can remember your last setting of the mode, no need to set it again for the next time flight.
Check out the rest of our LEDs, as well as our other ViFly Offerings. 

Features

3+ Miles of visibility
3 Different colors
3 Different light modes
Compact and lightweight
Easy installation for any drone

Specifications

Weight: 6g
Working Time: 4 hours
LED Colors: White, Red, and Green
Visibility: 3+ Miles
Charging voltage: 4.5-5.5V
Charging Port: Micro USB
Charging Time: 1.5 Hours

Includes

1x ViFly Strobe Anti Collision Drone Light
1x Micro USB Cable
1x Velcro Pad Set


ViFly Strobe Anti Collision Drone Light from WREKD Co.

VIFLY

VIFLY Strobe uses 5 3W Hi-intensity LED which provides the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA guidelines, a must-have accessory for your safe flying at night. Each color has 3 modes, strobe, slow flash, and solid. You can use 3 white LEDs for the FAA 3-mile visibility request and a green/red LED for maintaining Line of sight (LOS). The strobe can remember your last setting of the mode, no need to set it again for the next time flight.

ViFly Strobe Anti Collision Drone Light - For Sale At RaceDayQuads

The VIFLY Strobe is an anti-collision light specially designed for the legal night flying of drones. VIFLY Strobe uses five 3W Hi-intensity LEDs which provide the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA guidelines, a must-have accessory for your safe flying at night.

The VIFLY Strobe is an anti-collision light specially designed for the legal night flying of drones. VIFLY Strobe uses five 3W Hi-intensity LEDs which provide the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA 

VIFLY Strobe Anti-Collision Drone LED Light

MenaceRC

MenaceRC RCSwitch

The RCswitch is capable of switching loads or auxiliary items ON/OFF by connecting to your receiver and controlling from any channel on your radio. When the PWM signal is over 1750uS it will complete the circuit. Making this perfect for switching higher power items on your models such as smoke machines, lights, sound e

Menace RC Switch

Menace RC

The Menace RCswitch is capable of switching loads or auxiliary items ON/OFF by connecting to your receiver and controlling from any channel on your radio. When the PWM signal is over 1750uS it will complete the circuit, making this perfect for switching higher power items on your models. Use it to switch power to smoke machines, lights, sound effects, flaps, landing gear, triggering camera shutters, etc…

The Menace RCswitch is capable of switching loads or auxiliary items ON/OFF by connecting to your receiver and controlling from any channel on your radio. When the PWM signal is over 1750uS it will complete the circuit, making this perfect for switch

Flywoo

Flywoo BQNANO V1.0 Compass and Barometer

Flywoo BQNANO  V1.0 Model w/ Compass &amp; Baro 0.6g Check out all our GPS and Lost Model Devices and the rest of our Flywoo Products! Features: Model: FLYWOO BQNANO V1 Baro: BMP280 Compass QMC5883L Power supply: 3.3V-5V Communication: I2C protocol Pin: SH1.0-4 Weight: 0.6g Module size: 11mm*15.5mm If your FC board has

Flywoo BQNANO V1.0 Model w/ Compass & Baro 0.6g

FLYWOO

Tiny module with compass and barometer from Flywoo!
If your FC board has a barometer, you need to disconnect the Baro SDA / SCL pad.
Check out all our Flywoo products!
Specifications


Baro: BMP280
Compass QMC5883L
Power supply: 3.3V-5V
Communication: I2C protocol
Pin: SH1.0-4
Module size: 11x15.5mm
Weight: 0.6g

Includes

1x Flywoo BQNANO V1.0 Compass and Barometer



Tiny module with compass and barometer from Flywoo!

Flywoo BQNANO V1.0 Compass and Barometer - For Sale at RaceDayQuads

Tiny module with compass and barometer from Flywoo! If your FC board has a barometer, you need to disconnect the Baro SDA / SCL pad. Check out all our Flywoo products! Specifications Baro: BMP280 Compass QMC5883L Power supply: 3.3V-5V Communication: I2C protocol Pin: SH1.0-4 Module size: 11x15.5mm Weight: 0.6g Includes

Flywoo BQNANO V1.0 Compass and Barometer from WREKD Co.

The Flywoo BQNANO V1 Compass/Baro Module is a nano module with a QMC5883L compass and BMP280 barometer combined.

Flywoo BQNANO V1 Compass/Baro Module

HGLRC

HGLRC Soter Self-Powered Drone Buzzer

The HGLRC Soter FPV Drone Buzzer is loud, durable, has a compact appearance, and is equipped with a built-in power supply that lasts up to 2hrs after the power is off. 

HGLRC Soter FPV Drone Buzzer

ViFly Finder Mini - Lost Drone Finder/Locater/Alarm

VIFLY Finder Mini is a smaller version of VIFLY Finder 2, weighs only 2.7g that would be the perfect drone buzzer for compact builds and small drones. After searching and testing a large number of beepers, VIFLY Finder Mini uses the loudest buzzer that can be found in this tiny size, the volume can be up to 100 dB. Alm

VIFLY Finder Mini FPV Micro Racing Drone Buzzer with Battery

The ViFly Finder Mini is a smaller more compact version of the ViFly Finder 2, weighing only 2.7g. This buzzer is perfect for compact builds and uses a buzzer that operates at up to 100 dB.
Check out all our buzzers and alarms and all our Vifly products!


Specifications

Volume: Up to 100 dB
Working Time: Up to 7 hours
Battery: 40mAh LiPo
Dimensions: 19x11x12 mm
Weight: 2.7g

Includes

1x Vifly Finder Mini - Lost Drone Finder/Locater/Alarm


Fret no more with the ViFly Finder Mini Lost Drone Finder, Locater & Alarm! This handy device helps you reconnect with your lost quad after crashes or other issues.

ViFly Finder Mini Lost Drone Finder, Locater & Alarm for Sale

After searching and testing a large number of beepers, VIFLY has come up wi that e Finder Mini, which features one of the loudest buzzers in a tiny size. 

VIFLY Finder Mini Drone Buzzer

The ViFly Finder Mini is a smaller more compact version of the ViFly Finder 2, weighing only 2.7g. This buzzer is perfect for compact builds and uses a buzzer that operates at up to 100 dB. Check out all our buzzers and alarms and all our Vifly products! Specifications Volume: Up to 100 dB Working Time: Up to 7 hours B

ViFly Finder Mini - Lost Drone Finder/Locater/Alarm from WREKD Co.

ImmersionRC

ImmersionRC Ghost Proton Pack VTX/RX Sled 3 Pack

The ImmersionRC Ghost Proton 30x30 Pack is a printed circuit board (PCB) designed to&nbspdramatically simplify wiring, mounting, and cooling of&nbspTramp Nano&nbsp+&nbspGhost&nbspcombinations.&nbsp

The ImmersionRC Ghost Proton 30x30 Pack is a printed circuit board (PCB) designed to dramatically simplify wiring, mounting, and cooling of Tramp Nano + Ghost combinations. 

ImmersionRC Ghost Proton 30x30 Pack

The ImmersionRC Ghost Proton 20x20 Pack is a printed circuit board (PCB) designed to&nbspdramatically simplify wiring, mounting, and cooling of&nbspTramp Nano&nbsp+&nbspGhost&nbspcombinations.&nbsp&nbsp

The ImmersionRC Ghost Proton 20x20 Pack is a printed circuit board (PCB) designed to dramatically simplify wiring, mounting, and cooling of Tramp Nano + Ghost combinations.  

ImmersionRC Ghost Proton 20x20 Pack 

Rush FPV

Rush FPV Rush Blade Power Filter Board

The RUSH BLADE Power Filter Board by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure and high power. Excessive voltage peaks can cause interference to other components. Current surges generated during crashes can also have a strong impact on the MOSFET's and the 

RUSHFPV Rush Blade Power Filter Board

RUSHFPV

The RUSH BLADE Power Filter Board by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure and high power. Excessive voltage peaks can cause interference to other components. Current surges generated during crashes can also have a strong impact on the MOSFET's and the power supply and can cause damage.
The RUSH PFB is small in size and can be installed at the tail of the ESC as a supplementary device for the filter. It is equipped with two 35V 330uF high-speed solid capacitors, and the parallel ESR is very low 5 m0 (TEST FREQ @10KHz)! It has a good filtering effect on high-frequency interference generated by ESC.
There are 3 high-power TVS diodes on board, which can cut voltage peaks at ns speeds, and absorb high-voltage surges caused by collisions of the propeller during a crash in time to protect the field-effect tube and other components from the surge. We recommend installing it in a high-power 6S brushless system.
Be sure to check out our other Rush FPV Products!
Includes

1x RushFPV Rush Blade Power Filter Board



RUSHFPV Blade Power Filter Board

The new filtering solution for FPV hobby, it has the perfect filtering effort on high frequency interference generated by ESC.

RushFPV RUSH BLADE Power Filter Board

The RUSH BLADE Power Filter Board by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure and high power. Excessive voltage peaks can cause interference to other components. Current surges generated during crashes can also have a strong impact on the MOSFET&#39s and the power supply and can cause damage.
The RUSH PFB is small in size and can be installed at the tail of the ESC as a supplementary device for the filter. It is equipped with two 35V 330uF high-speed solid capacitors, and the parallel ESR is very low 5 m0 (TEST FREQ @10KHz)! It has a good filtering effect on high-frequency interference generated by ESC.
There are 3 high-power TVS diodes on board, which can cut voltage peaks at ns speeds, and absorb high-voltage surges caused by collisions of the propeller during a crash in time to protect the field-effect tube and other components from the surge. We recommend installing it in a high-power 6S brushless system.
Be sure to check out our other Rush FPV Products!
Includes

1x RushFPV Rush Blade Power Filter Board



RUSHFPV Blade Power Filter Board from WREKD Co.

Matek Digital Airspeed Sensor ASPD-4525

Get the Matek Digital Airspeed Sensor ASPD-4525 shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

Matek Digital Airspeed Sensor ASPD-4525 - RMRC

If you&#39ve ever wanted to see your wing&#39s actual relative airspeed rather than ground speed supplied by GPS, this is the thing for you! The kit includes a sensor, pitot tube and connection rubber tubing. 
Check out all our wing parts &ampamp our Matek gear selection!
Specifications

Board Supply voltage: 4~6V DC
Sensor: MS4525
Working current: 5mA
Output: I2C (SCL &ampamp SDA)
Pressure Ranges: 1 PSI (6.89kPa)
Maximum Pressure: 20 PSI (137.9kPa)
Operating Temperature: -40°C ~ 125°C
Accuracy: ±0.25% SPAN
Red LED: power indicator
JST-GH sequence: 5V, SCL, SDA, GND
Weight: 3.5g (sensor board)

Includes

1x Matek Digital Airspeed Sensor ASPD-4525
1x JST-GH to JST-GH 20cm silicon cable.
1x Pitot Tube.
1x Clear silicon tubing 40cm

Wiring Diagram
5V to FC 4~6VSCL to FC I2C_SCLSDA to FC I2C_SDAG to FC GND

If you've ever wanted to see your wing's actual relative airspeed rather than ground speed supplied by GPS, this is the thing for you! The kit includes a sensor, pitot tube and connection rubber tubing.  Check out all our wing parts &amp; our Matek gear selection! Specifications Board Supply voltage: 4~6V DC Sensor: MS

Matek Digital Airspeed Sensor ASPD-4525 from WREKD Co.

If you've ever wanted to see your wing's actual relative airspeed rather than ground speed supplied by GPS, this is the thing for you! The kit includes a sensor, pitot tube and connection rubber tubing. 
Check out all our wing parts &amp our Matek gear selection!
Specifications

Board Supply voltage: 4~6V DC
Sensor: MS4525
Working current: 5mA
Output: I2C (SCL &amp SDA)
Pressure Ranges: 1 PSI (6.89kPa)
Maximum Pressure: 20 PSI (137.9kPa)
Operating Temperature: -40°C ~ 125°C
Accuracy: ±0.25% SPAN
Red LED: power indicator
JST-GH sequence: 5V, SCL, SDA, GND
Weight: 3.5g (sensor board)

Includes

1x Matek Digital Airspeed Sensor ASPD-4525
1x JST-GH to JST-GH 20cm silicon cable.
1x Pitot Tube.
1x Clear silicon tubing 40cm

Wiring Diagram
5V to FC 4~6VSCL to FC I2C_SCLSDA to FC I2C_SDAG to FC GND

The Mateksys Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear silicon tubing (40cm) to help monitor your wing's airspeed!

MATEKSYS Digital Airspeed Sensor (ASPD-4525)

Matek Digital Airspeed Sensor ASPD-DLVR

Digital airspeed sensor from MATEK, a great addition to your Fixed Wing.
Check out all our wing flight controllers as well as the entire Matek selection!
Features


ArduPilot AP_Periph F405 CAN node
All sensors DLVR-L10D, Industrial temperature range
CAN &amp I2C Interface
Typical Platforms: Fixed-Wing, QuadPlane, VTOL
CAN JST-GH connector, UAVCAN Protocol
I2C JST-GH connector, DLVR-L10D I2C mode (I2C address 0x28)
UART1, Firmware update
UART2, Spare for external GPS
UART3, MSP Protocol (To be supported)
CAN bootloader LED, Blue

Fast blinking, No communication between CAN node and Flight Controllers
Slow blinking, Communicating between CAN node and Flight Controllers

3.3V Power LED, Red

Specifications

Input voltage range: 4~6V
Power consumption: 60mA
Operating Temperatures: -20°C to 85°C
Pressure Range: 2500Pa (± 10 inH2O)
Burst Pressure: 75kPa
Speed Range: ±250 km/h
Size: 22mm*22mm*12.5mm
Weight: 4g

Includes

1x Matek Digital Airspeed Sensor ASPD-DLVR

Wiring Diagram


Digital airspeed sensor from MATEK, a great addition to your Fixed Wing. Check out all our wing flight controllers as well as the entire Matek selection! Features ArduPilot AP_Periph F405 CAN node All sensors DLVR-L10D, Industrial temperature range CAN &amp; I2C Interface Typical Platforms: Fixed-Wing, QuadPlane, VTOL 

The Matek Digital Airspeed Sensor ASPD-DLVR features CAN JST-GH connector, UAVCAN Protocol UART1, UART2, UART13 among many other cool features!

MATEKSYS Digital AirSpeed Sensor (ASPD-DLVR, CAN, I2C & UAVCAN)

MATEKSYS Digital AirSpeed Sensor (ASPD-DLVR, CAN, I2C &amp UAVCAN)

Digital airspeed sensor from MATEK, a great addition to your Fixed Wing.
Check out all our wing flight controllers as well as the entire Matek selection!
Features


ArduPilot AP_Periph F405 CAN node
All sensors DLVR-L10D, Industrial temperature range
CAN &ampamp I2C Interface
Typical Platforms: Fixed-Wing, QuadPlane, VTOL
CAN JST-GH connector, UAVCAN Protocol
I2C JST-GH connector, DLVR-L10D I2C mode (I2C address 0x28)
UART1, Firmware update
UART2, Spare for external GPS
UART3, MSP Protocol (To be supported)
CAN bootloader LED, Blue

Fast blinking, No communication between CAN node and Flight Controllers
Slow blinking, Communicating between CAN node and Flight Controllers

3.3V Power LED, Red

Specifications

Input voltage range: 4~6V
Power consumption: 60mA
Operating Temperatures: -20°C to 85°C
Pressure Range: 2500Pa (± 10 inH2O)
Burst Pressure: 75kPa
Speed Range: ±250 km/h
Size: 22mm*22mm*12.5mm
Weight: 4g

Includes

1x Matek Digital Airspeed Sensor ASPD-DLVR

Wiring Diagram
