FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

T-Motor

T-Motor Pacer Alpha G4 3-6S 30x30 Flight Controller

Tiger Motors

The T-Motor Pacer Alpha G4 is a flight controller with a 30.5x30.5 mounting pattern. This HD version allows plug-and-play with the O3 Air unit for a no-solder build.

T-Motor Pacer Alpha G4 Flight Controller - HD 30.5x30.5

T-Motor Hobby

What if the best electronics company in FPV, T-Motor was to start making Fettec Alpha Flight Controllers? Well here it is, T-Motor Pacer Alpha G4 Flight Controller. HD version allows you to plug your O3 Air Unit in to the FC without the need for soldering.
Check out all our 30x30 Flight Controllers, and all our T-Motor products!
Features


New Alpha Firmware, lets you super fly
Supports Dshot2400
Directly Plug into DJI 03 Air Unit (HD only)


Specifications

MCU: STM32G473
Gyro: IIM-42652
BEC: [Standard=5V2A] [HD=5V2A / 10V2A]
OSD: HD OSD
Firmware: Fettec Alpha
Weight 7g
Input Voltage 3-6S
Size: 37x37x4.6mm
Mounting 30.5x30.5mm/M3 (including gummy)
Supports DShot2400
UART2: RX

UART4: MSP

Includes

1x T-Motor Pacer Alpha G4 HD 3-6S 30x30 Flight Controller
1x Accessory Kit



What if the best electronics company in FPV, T-Motor was to start making Fettec Alpha Flight Controllers? Well here it is, T-Motor Pacer Alpha G4 Flight Controller. HD version allows you to plug your O3 Air Unit in to the FC without the need for soldering. Check out all our 30x30 Flight Controllers, and all our T-Motor

T-Motor Pacer Alpha G4 3-6S 30x30 Flight Controller - Choose Your Version from WREKD Co.

T-Motor Pacer Alpha G4 3-6S 30x30 Flight Controller - Choose Your Version

TMOTOR

T-Motor Pacer Alpha G4 3-6S 30x30 Flight Controller - Choose Your Vers

The T-Motor Pacer Alpha G4 is a flight controller with a 30.5x30.5 mounting pattern. 

T-Motor Pacer Alpha G4 Flight Controller - Analog 30.5x30.5

Processor (MCU)

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 

Flight Controllers

FC Stack Mount

Built-in VTX

Built-in ESC

SpeedyBee

SpeedyBee F405 V4 Flight Controller

RUNCAM

Introducing the SpeedyBee F405 V4 flight controller with dual gyroscope power supply filtering, 4-level battery indicators, support for up to 8 motors, 4x LED strip soldering pads, 3A 5V &amp 9V BECs, and fixed SD card compatibility issue. Change motor direction wirelessly and quickly get set up with the DJI Air Unit plug-and-play set up. Plus, onboard barometer is included.












Interested in the SpeedyBee F405 V4  BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 55A 4in1 ESC)?
Interested in the SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC?
Check out all our 30x30 stacks &amp combos, and all our Speedy Bee products!
Features














User manual
Wireless FC &amp ESC full configuration
Dual gyroscope power supply filtering 

Onboard 4-level battery indicators
Supports up to 8 Motors 
4x LED strips soldering pads
5V &amp 9V BECs upgraded to 3A output
Fixed SD card compatibility issue
Change motor direction wirelessly 
DJI Air Unit plug-and-play

Built-in barometer








































Specifications
SpeedyBee F405 V4 30x30 Flight Controller

MCU: STM32F405

IMU(Gyro): ICM42688P

USB Port Type: Type-C

Barometer: Built-in

OSD Chip: AT7456E chip

BLE Bluetooth: Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART4)

WIFI: Not supported

DJI Air Unit Connection Way: Two ways supported: 6-pin connector or direct soldering.

6-pin DJI Air Unit Plug: Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire is needed to be changed.Blackbox MicroSD Card Slot: Betaflight firmware requires the type of the microSD card to be either Standard (SDSC) or High capacity (SDHC) under 32GB, so extended capacity cards (SDXC) are not supported(Many high-speed U3 cards are SDXC). Also the microSD card MUST be formatted with the FAT16 or FAT32 (recommended) format, you could use any SD card less than 32GB, but the Betaflight can only recognize 4GB maximum. 

Current Sensor Input: Supported. For SpeedyBee BLS 55A ESC, please set scale = 400 and Offset = 0.

Power Input: 3S - 6S Lipo(Through G, BAT pins/pads from the 8-pin connector or 8-pads on the bottom side)

5V Output: 9 groups of 5V output, four +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 4x LED 5V pads. The total current load is 3A.

9V Output: 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 3A.

3.3V Output: Supported. Designed for 3.3V-input receivers. Up to 500mA current load.

4.5V Output: Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.

ESC Signal: M1 - M4 on bottom side and M5-M8 on front side.

UART: 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6

ESC Telemetry: UART R5(UART5)

I2C: Supported. SDA &amp SCL pads on front side. Used for magnetometer, sonar, etc.

Traditional Betaflight LED Pad: Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LED controlled by Betaflight firmware.

Buzzer: BZ+ and BZ- pad used for 5V Buzzer

BOOT Button: Supported.[A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked.[B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.
RSSI Input: Supported. Named as RS on the front side.

Smart Port / F.Port: Not supported

Supported Flight Controller Firmware: BetaFlight(Default), INAV

Firmware Target Name: SPEEDYBEEF405V4

Mounting: 30.5 x 30.5mm( 4mm hole diameter)

Dimension: 41.6(L) x 39.4(W) x 7.8(H)mm

Weight: 10.5g


Includes

1x SpeedyBee F405 V4 3-6S 30x30 Flight Controller


 Wiring Diagram



Introducing the SpeedyBee F405 V4 flight controller with dual gyroscope power supply filtering, 4-level battery indicators, support for up to 8 motors, 4x LED strip soldering pads, 3A 5V &amp; 9V BECs, and fixed SD card compatibility issue. Change motor direction wirelessly and quickly get set up with the DJI Air Unit 

SpeedyBee F405 V4 3-6S 30x30 Flight Controller

Elevate your drone's performance with the SpeedyBee F405 V4 Flight Controller, featuring STM32F405 MCU and ICM42688P gyro for precise control.&nbsp

Elevate your drone's performance with the SpeedyBee F405 V4 Flight Controller, featuring STM32F405 MCU and ICM42688P gyro for precise control. 

SpeedyBee F405 V4 Flight Controller - 30x30

SpeedyBee F405 V4 FC uses the STM32F405 chip (better than F411), onboard 4-level battery life indicator, 4GB Blackbox SD card slot for your flight logs, 4 groups of LED strip pads, complete with a DJI plug for your digital quad, and built-in Bluetooth for wireless configuration on the SpeedyBee app. * The DJI Air Unit 

SpeedyBee F405 V4 Flight Controller - 30x30mm

Introducing the SpeedyBee F405 V4 flight controller with dual gyroscope power supply filtering, 4-level battery indicators, support for up to 8 motors, 4x LED strip soldering pads, 3A 5V &ampamp 9V BECs, and fixed SD card compatibility issue. Change motor direction wirelessly and quickly get set up with the DJI Air Unit plug-and-play set up. Plus, onboard barometer is included.












Interested in the SpeedyBee F405 V4  BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 55A 4in1 ESC)?
Interested in the SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC?
Check out all our 30x30 stacks &ampamp combos, and all our Speedy Bee products!
Features














User manual
Wireless FC &ampamp ESC full configuration
Dual gyroscope power supply filtering 

Onboard 4-level battery indicators
Supports up to 8 Motors 
4x LED strips soldering pads
5V &ampamp 9V BECs upgraded to 3A output
Fixed SD card compatibility issue
Change motor direction wirelessly 
DJI Air Unit plug-and-play

Built-in barometer








































Specifications
SpeedyBee F405 V4 30x30 Flight Controller

MCU: STM32F405

IMU(Gyro): ICM42688P

USB Port Type: Type-C

Barometer: Built-in

OSD Chip: AT7456E chip

BLE Bluetooth: Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART4)

WIFI: Not supported

DJI Air Unit Connection Way: Two ways supported: 6-pin connector or direct soldering.

6-pin DJI Air Unit Plug: Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire is needed to be changed.Blackbox MicroSD Card Slot: Betaflight firmware requires the type of the microSD card to be either Standard (SDSC) or High capacity (SDHC) under 32GB, so extended capacity cards (SDXC) are not supported(Many high-speed U3 cards are SDXC). Also the microSD card MUST be formatted with the FAT16 or FAT32 (recommended) format, you could use any SD card less than 32GB, but the Betaflight can only recognize 4GB maximum. 

Current Sensor Input: Supported. For SpeedyBee BLS 55A ESC, please set scale = 400 and Offset = 0.

Power Input: 3S - 6S Lipo(Through G, BAT pins/pads from the 8-pin connector or 8-pads on the bottom side)

5V Output: 9 groups of 5V output, four +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 4x LED 5V pads. The total current load is 3A.

9V Output: 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 3A.

3.3V Output: Supported. Designed for 3.3V-input receivers. Up to 500mA current load.

4.5V Output: Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.

ESC Signal: M1 - M4 on bottom side and M5-M8 on front side.

UART: 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6

ESC Telemetry: UART R5(UART5)

I2C: Supported. SDA &ampamp SCL pads on front side. Used for magnetometer, sonar, etc.

Traditional Betaflight LED Pad: Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LED controlled by Betaflight firmware.

Buzzer: BZ+ and BZ- pad used for 5V Buzzer

BOOT Button: Supported.[A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked.[B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.
RSSI Input: Supported. Named as RS on the front side.

Smart Port / F.Port: Not supported

Supported Flight Controller Firmware: BetaFlight(Default), INAV

Firmware Target Name: SPEEDYBEEF405V4

Mounting: 30.5 x 30.5mm( 4mm hole diameter)

Dimension: 41.6(L) x 39.4(W) x 7.8(H)mm

Weight: 10.5g


Includes

1x SpeedyBee F405 V4 3-6S 30x30 Flight Controller


 Wiring Diagram



SpeedyBee F405 V4 3-6S 30x30 Flight Controller from WREKD Co.

Speedybee

Introducing the SpeedyBee F405 V4 BLS 55A 30x30 FC&ampESC Stack – a high-performance flight controller and ESC combination that redefines value for money. Packed with top-shelf features, this stack offers exceptional performance at an unbeatable price of $69.99.Key Features:Powerful STM32F405 FC: Outclassing the F411, the STM32F405 FC ensures precise and responsive flight control.Onboard Battery Life Indicator: Stay informed with the 4-level battery life indicator, eliminating the need for additional tools.4GB Blackbox SD Card Slot: Capture and review your flight logs effortlessly with the onboard 4GB Blackbox SD card slot.DJI Plug Compatibility: Seamlessly connect your digital quad with the DJI plug, compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1.Built-in Bluetooth: Configure your setup wirelessly using the SpeedyBee app, enhancing user convenience.Robust 55A 4-in-1 ESC: The ESC features an aluminum alloy heat sink, TVS protective diode, Jap...

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

SpeedyBee F405 V4 BLS 55A 30x30 FC&ESC Stack - RMRC

SpeedyBee F405 V4 BLS 55A 30x30 FC&ampESC Stack

HGLRC

HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller

The HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller boasts a powerful STM32F722 processor with up to 216 MHz of computing power for more seamless control, improved feel, and fast response times. It also features a high-performance MPU6000 gyroscope with 42688 pads for optimum stability and a 16MB black box for plenty of flight data storage. Plus, bluetooth parameter adjustment with the SpeeyBee APP allows you to adjust serial port, PID and other flight control parameters anytime and anywhere. There&#39s even a 10V electronic switch for hassle-free power-on/off and nano-scale coating on both sides to protect against water, moisture, and corrosion.
Interested in the HGLRC F760 Mini F722 3-6S 20x20 Stack/Combo (F7 FC / G071 32Bit 60A 4in1 ESC) - MPU6000? 
Interested in just the HGLRC SPECTER G071 128K 32Bit 60A 3-6S 20x20 4in1 ESC? 
Check out all our 20x20 FCs, and all of our HGLRC products!

Specifications
HGLRC SPECTER F722 mini FC

FC Firmware: HGLRC F722 Mini
MCU: STM32F722
Gyro: MPU6000
OSD: AT7456E
Barometer: BMP280
Blackbox 16MB
UARTS:5
Input Voltage: 7.4V-22.8V/2-6S LiPO
BEC: 10V2A/5V2.5A
Size: 37mmx34mmx9.8mm
Mounting: 20x20, M3
Weight: 18g

Includes

1x HGLRC SPECTER F722 mini flight controller

1x 30AWG 25mm double-ended SH1.0-8P cable

1x 30AWG 70mm single-head SH1.0-7P/single-head SH1.0-6P DJI cable

1x 30AWG 70mm single-head SH1.0-7P/single-head GH1.25-6P VTX cable

1x 30AWG 60mm single-head SH1.0-3P/single-head 1.25-3P camera cable

1x 30AWG 100mm single-head SH1.0-4P receiver cable

4x M3x20 hexagon socket screws


The HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller boasts a powerful STM32F722 processor with up to 216 MHz of computing power for more seamless control, improved feel, and fast response times. It also features a high-performance MPU6000 gyroscope with 42688 pads for optimum stability and a 16MB black box for ple

HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller - MPU6000 from WREKD Co.

HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller - MPU6000

The HGLRC Specter F722 Mini HD Flight Controller - MPU6000 is a culmination of over a year's technology development, offering an optimized design and improved circuitry for a refined flying experience.

HGLRC Specter F722 Mini HD Flight Controller - MPU6000 - 20x20

The HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller boasts a powerful STM32F722 processor with up to 216 MHz of computing power for more seamless control, improved feel, and fast response times. It also features a high-performance MPU6000 gyroscope with 42688 pads for optimum stability and a 16MB black box for plenty of flight data storage. Plus, bluetooth parameter adjustment with the SpeeyBee APP allows you to adjust serial port, PID and other flight control parameters anytime and anywhere. There's even a 10V electronic switch for hassle-free power-on/off and nano-scale coating on both sides to protect against water, moisture, and corrosion.
Interested in the HGLRC F760 Mini F722 3-6S 20x20 Stack/Combo (F7 FC / G071 32Bit 60A 4in1 ESC) - MPU6000? 
Interested in just the HGLRC SPECTER G071 128K 32Bit 60A 3-6S 20x20 4in1 ESC? 
Check out all our 20x20 FCs, and all of our HGLRC products!

Specifications
HGLRC SPECTER F722 mini FC

FC Firmware: HGLRC F722 Mini
MCU: STM32F722
Gyro: MPU6000
OSD: AT7456E
Barometer: BMP280
Blackbox 16MB
UARTS:5
Input Voltage: 7.4V-22.8V/2-6S LiPO
BEC: 10V2A/5V2.5A
Size: 37mmx34mmx9.8mm
Mounting: 20x20, M3
Weight: 18g

Includes

1x HGLRC SPECTER F722 mini flight controller

1x 30AWG 25mm double-ended SH1.0-8P cable

1x 30AWG 70mm single-head SH1.0-7P/single-head SH1.0-6P DJI cable

1x 30AWG 70mm single-head SH1.0-7P/single-head GH1.25-6P VTX cable

1x 30AWG 60mm single-head SH1.0-3P/single-head 1.25-3P camera cable

1x 30AWG 100mm single-head SH1.0-4P receiver cable

4x M3x20 hexagon socket screws


T-Motor Velox F7 SE 3-6S 30x30 Flight Controller

Experience the full functionality of VELOX F7 SE flight controller. Enhanced safety with Betaflight wiring standard. Precise control, seamless compatibility, and wireless parameter adjustment. Upgrade your FPV experience now!
Browse our 30x30 Flight Controllers and all our T-Motor products!
Features

Experience the full functionality of VELOX F7 SE flight controller. Enhanced safety with Betaflight wiring standard. Precise control, seamless compatibility, and wireless parameter adjustment. Upgrade your FPV experience now!
Simplified Wire Order: VELOX F7 SE flight controller ensures easy and standardized wire connections, compatible with V50A SE ESC.
Enhanced Performance: Experience stable flight with low latency using the second-generation power solution.
Wireless Bluetooth Control: Adjust settings wirelessly using SpeedyBee software on your mobile phone, eliminating the need for cables.
Ample Memory Capacity: 128M storage, allowing for efficient recording of flight data.
Versatile Solder Pads: Conveniently connect various devices without soldering, including video receivers, cameras, LEDs, and GPS.
Multi-Motor Control: Control up to 8 motors for diverse configurations, expanding the capabilities of your drone.


 
Specifications

 Firmware: STM32F7X2
Unified Target: TMTR-TMOTOR VELOX F7
MCU: STM32F722
Gyroscope: IMC-42688-P(SPI)
BEC: 5V2A &amp 12V1.5A
Uarts: 6
Bluetooth: TMFC
OSD: AT7456E&ampHD
Black Box: 128MB
USB: Type C
Weight: 9g
Size: 37.5x40x6.4mm
Installation Hole: 30.5x30.5/⌀4mm
Input voltage: 12-27V(3-6S)
Typical application: 170-450multi-rotor

Includes
1x T-Motor Velox F7 SE 3-6S 30x30 Flight Controller

Experience the full functionality of VELOX F7 SE flight controller. Enhanced safety with Betaflight wiring standard. Precise control, seamless compatibility, and wireless parameter adjustment. Upgrade your FPV experience now! Browse our 30x30 Flight Controllers and all our T-Motor products! Features Experience the full

Introducing the T-Motor Velox F7 SE Flight Controller, engineered for precision and performance in aerial applications.&nbsp

Introducing the T-Motor Velox F7 SE Flight Controller, engineered for precision and performance in aerial applications. 

T-Motor Velox F7 SE Flight Controller

Diatone

Diatone Mamba F722 APP MK4 30x30 Flight Controller

Diatone MAMBA MK4 F722 APP Flight Controller - 30x30mmCheck out all our 30x30 Flight Controllers and our full Diatone collection!. Package Includes:  1 x Diatone MAMBA MK4 F722 APP Flight Controller - 30x30mm

Diatone MAMBA MK4 F722 APP Flight Controller - 30x30mm








The Diatone Mamba MK4 is an F722 flight controller. With WiFi capabilities through the SpeedyBee APP, this stack is the perfect addition to your FPV build. This version has an IMC42688P Gyro.





Features


30.5 x 30.5mm Mounting Pattern
16M Flash Memory Blackbox
3~6S Lipo (12.6~25.2V) Input
WiFI SpeedyBee Capabilities
MAMBA MK4 F722 APP FC
ICM42688P GYRO
6 Uarts
Buzzer
OSD











Specifications


Receiver: TBS/SBUS/|IBUS/DSM
Mounting: 30.5x 30.5mm/M3
Receiver Protection: Yes
Blackbox: 16M Memory
Size: 38.0x40.5x8mm
WIFI: SpeedyBee APP
Frequency: 216MHz
Software: Betaflight
BEC Protection: Yes
TVS Protection: Yes
AIR UNIT Port: Yes
MCU: STM32F722
Gyro: IMC42688P
ESC Signal: 8 Set
Buzzer Pad: Yes
VTX Switch: Yes
OSD: AT 7456E
BEC 3.3V: 0.5A
CURR Pad: Yes
Input: 6S Lipo
MB LED: Yes
Weight: 10g
BF LED: Yes
Uarts: 6 Set
BEC 9V: 3A
BEC 5: 3A
F.Port: Yes
12C: Yes






Includes


1x Diatone MAMBA MK4 F722 APP (WiFi) Flight Controller - IMC42688P
5x M3 ESC Isolation Dampers
5x M3 Silicone Dampers
1x 6-Pin Air Unit Cable
2x 8-Pin Cable




















The Diatone Mamba MK4 is an F722 flight controller. With WiFi capabilities through the SpeedyBee APP, this stack is the perfect addition to your FPV build. This version has an IMC42688P Gyro. Features 30.5 x 30.5mm Mounting Pattern 16M Flash Memory Blackbox 3~6S Lipo (12.6~25.2V) Input WiFI SpeedyBee Capabilities MAMBA

MAMBA MK4 F722 APP Flight Controller 30mm/M3

DiatoneUSA





The Diatone Mamba MK4 is an F722 flight controller. With WiFi capabilities through the SpeedyBee APP, this stack is the perfect addition to your FPV build. This version has an IMC42688P Gyro.





Check out all our 30x30 FCs and all our Diatone Gear!




Specifications





MCU: STM32F722
GYRO: IMC42688P
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED

F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3-6S Lipo
TVS Protection: Yes
BEC: 3.3V/0.5A, &ampamp 5V/3A, and 9V/3A

Mounting: 30.5x30.5mm, M3


Includes

1x Diatone Mamba DJI F722 APP MK4 30x30 Flight Controller
5x M3 ESC Isolation Dampers
5x M3 Silicone Dampers
1x 6-Pin Air Unit Cable
2x 8-Pin Cable

Wiring Diagram











The Diatone Mamba MK4 is an F722 flight controller. With WiFi capabilities through the SpeedyBee APP, this stack is the perfect addition to your FPV build. This version has an IMC42688P Gyro. Check out all our 30x30 FCs and all our Diatone Gear! Specifications MCU: STM32F722 GYRO: IMC42688P Barometer: Yes OSD: Yes Blac

Diatone Mamba DJI F722 APP MK4 30x30 Flight Controller from WREKD Co.

Diatone Mamba DJI F722 APP MK4 30x30 Flight Controller

The Diatone Mamba MK4 is an F722 flight controller. With WiFi capabilities through the SpeedyBee APP, this stack is the perfect addition to your FPV build. This version has an IMC42688P Gyro.

Diatone MAMBA MK4 F722 APP (WiFi) Flight Controller - ICM42688P

DIATONE





The Diatone Mamba MK4 is an F722 flight controller. With WiFi capabilities through the SpeedyBee APP, this stack is the perfect addition to your FPV build. This version has an IMC42688P Gyro.





Check out all our 30x30 FCs and all our Diatone Gear!




Specifications





MCU: STM32F722
GYRO: IMC42688P
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED

F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3-6S Lipo
TVS Protection: Yes
BEC: 3.3V/0.5A, &amp 5V/3A, and 9V/3A

Mounting: 30.5x30.5mm, M3


Includes

1x Diatone Mamba DJI F722 APP MK4 30x30 Flight Controller
5x M3 ESC Isolation Dampers
5x M3 Silicone Dampers
1x 6-Pin Air Unit Cable
2x 8-Pin Cable

Wiring Diagram











RDQ Bardwell F7 V2 3-6S 30x30 Flight Controller - JBF7 V2

IFLIGHT







The new JBF7 V2 takes everything great about the original JBF7 and adds a few key features that you asked for. Just like the original, it's got an F7 processor, SD card slot for black box logging, and 8 motor outputs. It's got a flexible pad layout that can handle almost any combination of peripherals you could want. Pads are large and heavy--easy for beginners to solder to and reduce the risk of lifted pads. With the new JBF7 V2, we switched to USB-C we added a VTX pit switch we added plugs for all of the major features, and we included pre-made plugs for common peripherals, to allow a no-solder or less-solder build for people using those peripherals. We also added small status LEDs for major components, to make troubleshooting easier. For those who like autonomous flight, the board now includes a barometer.







Check out all our 30x30 FCs and the full range of RDQ Products!

If you have any issues accessing the Black Box features please type out this text in the CLI to get black box data to your SD card "set sdcard_detect_inverted=on" press ENTER, then type "save" and press ENTER.
Features 


Manual written and feature set selected by Joshua Bardwell.
Board layout focused on flexibility and resilience. You can build what you want, how you want, without stress.
ESC 4-in-1 plug also has solder pads, for troubleshooting, or if you want to direct-solder the ESC.
Plug-and-play support for DJI Air Unit. Voltage regulator allows up to 6S input.
Eight motor pads for easy resource remapping or for that octo cinelifter you're thinking of building.
SD card slot for blackbox logging.
All major functions available in SH plugs, and pre-made wire set included for most common peripherals
USB-C plug
VTX pit switch built-in (9v rail only) allows you to power down the video transmitter using a controller switch

Barometer on board (no iNav target at release date, but possible for the future)
Status LEDs for major components allow easier troubleshooting
9v regulator rated for 3A. Verified to power HDZero Freestyle and DJI VTX.


Joshua Bardwell's Comprehensive Manual 
Specifications

Input Voltage: 3-6S LiPo
MCU: STM32F722
Gyro: BMI270

Barometer: DPS310
Power Outputs: 5V 3A, 9V 3A (w/ Pit Switch), 3.3V, vBat
BF Target: JBF7 V2

UARTs: 5 (I2C SDA/SCL shared with UART 3)

Plugs: 4in1 ESC, RX, Analog Cam, HD Cam, VTX, LED/Buzzer
Mounting Pattern: 30.5x30.5mm
Weight: 8.3g (w/ gummies &amp USB Protector) 


Includes

1x RDQ Bardwell F7 V2 3-6S 30x30 Flight Controller - JBF7 V2
1x 4in1 ESC Cable 
1x DJI Air Unit / HD Camera Cable

1x Analog Camera Cable  

1x Analog VTX Cable
1x LED / Buzzer Cable
1x Receiver Cable
1x USB-C Protector
1x Set of Gummies 


Wiring Diagram
For in depth wiring instructions, see Joshua Bardwell's Comprehensive Manual 



The new JBF7 V2 takes everything great about the original JBF7 and adds a few key features that you asked for. Just like the original, it's got an F7 processor, SD card slot for black box logging, and 8 motor outputs. It's got a flexible pad layout that can handle almost any combination of peripherals you could want. P

Joshua Bardwell







The new JBF7 V2 takes everything great about the original JBF7 and adds a few key features that you asked for. Just like the original, it&#39s got an F7 processor, SD card slot for black box logging, and 8 motor outputs. It&#39s got a flexible pad layout that can handle almost any combination of peripherals you could want. Pads are large and heavy--easy for beginners to solder to and reduce the risk of lifted pads. With the new JBF7 V2, we switched to USB-C we added a VTX pit switch we added plugs for all of the major features, and we included pre-made plugs for common peripherals, to allow a no-solder or less-solder build for people using those peripherals. We also added small status LEDs for major components, to make troubleshooting easier. For those who like autonomous flight, the board now includes a barometer.







Check out all our 30x30 FCs and the full range of Products!

If you have any issues accessing the Black Box features please type out this text in the CLI to get black box data to your SD card &quotset sdcard_detect_inverted=on&quot press ENTER, then type &quotsave&quot and press ENTER.
Features 


Manual written and feature set selected by Joshua Bardwell.
Board layout focused on flexibility and resilience. You can build what you want, how you want, without stress.
ESC 4-in-1 plug also has solder pads, for troubleshooting, or if you want to direct-solder the ESC.
Plug-and-play support for DJI Air Unit. Voltage regulator allows up to 6S input.
Eight motor pads for easy resource remapping or for that octo cinelifter you&#39re thinking of building.
SD card slot for blackbox logging.
All major functions available in SH plugs, and pre-made wire set included for most common peripherals
USB-C plug
VTX pit switch built-in (9v rail only) allows you to power down the video transmitter using a controller switch

Barometer on board (no iNav target at release date, but possible for the future)
Status LEDs for major components allow easier troubleshooting
9v regulator rated for 3A. Verified to power HDZero Freestyle and DJI VTX.


Joshua Bardwell&#39s Comprehensive Manual 
Specifications

Input Voltage: 3-6S LiPo
MCU: STM32F722
Gyro: BMI270

Barometer: DPS310
Power Outputs: 5V 3A, 9V 3A (w/ Pit Switch), 3.3V, vBat
BF Target: JBF7 V2

UARTs: 5 (I2C SDA/SCL shared with UART 3)

Plugs: 4in1 ESC, RX, Analog Cam, HD Cam, VTX, LED/Buzzer
Mounting Pattern: 30.5x30.5mm
Weight: 8.3g (w/ gummies &ampamp USB Protector) 


Includes

1x Bardwell F7 V2 3-6S 30x30 Flight Controller - JBF7 V2
1x 4in1 ESC Cable 
1x DJI Air Unit / HD Camera Cable

1x Analog Camera Cable  

1x Analog VTX Cable
1x LED / Buzzer Cable
1x Receiver Cable
1x USB-C Protector
1x Set of Gummies 


Wiring Diagram
For in depth wiring instructions, see Joshua Bardwell&#39s Comprehensive Manual 



Bardwell F7 V2 3-6S 30x30 Flight Controller - JBF7 V2 from WREKD Co.

Bardwell F7 V2 3-6S 30x30 Flight Controller - JBF7 V2

The Bardwell F7 V2 Flight Controller (JBF7 V2) features an F7 processor, ICM20602 Gyro, several DC power outputs, and 8 motor pads. The V2 now features USB-C, a VTX pit switch, solderless plugs, a barometer, iNav support, and LEDs.

HolyBro

Holybro Pix32 V6 Modular Flight Controller

Holybro

The Holybro Pix32 V6 Modular Flight Controller is the latest update to the pix32 v5 flight controllers.&nbsp

The Holybro Pix32 V6 Modular Flight Controller is the latest update to the pix32 v5 flight controllers. 

iFlight

iFlight BLITZ F7 Pro V1.1 Flight Controller

The iFlight BLITZ F722 Pro V1.1 flight controller features an improved circuit design, better components, and lower electrical noise. This FC is plug-and-play with DJI and has FC LED indicators, a 512Mb Black box, and an LC filter. 

iFlight BLITZ F7 Pro V1.1 Flight Controller - 35x35 

Zeez

Zeez F7 3030 V3 Flight Controller 

Zeez Design

The ZEEZ F7 V3 3030 is an 8 Motor Output, DJI HD System Ready Flight Controller with an on-board 9V@3A regulator to power the DJI Air Unit, with a simple plug-and-play configuration and 5V@3A regulator to power all the peripheral.

Matek

Matek F405-WMN Flight Controller 

Matek Systems

Matek's F405-WMN (Wing Mini) board is a great flight controller for those looking to save space and weight on their builds.&nbsp It puts pretty much all features from a full-size&nbspboard on something that measures just 31x26x16mm.&nbsp&nbsp

Matek's F405-WMN (Wing Mini) board is a great flight controller for those looking to save space and weight on their builds.  It puts pretty much all features from a full-size board on something that measures just 31x26x16mm.  

MATEKSYS F405-WMN Flight Controller 

SpeedyBee F7 V3 Flight Controller

RunCam

The SpeedyBee F7 V3 Flight Controller is an F722 FC featuring a BMP280 barometer, OSD, 500MB Memory Blackbox, a built-in FC LiPo monitoring system, and many more features.

Lumenier

Lumenier LUX F4 HD Ultimate 30x30 Flight Controller 

The Lumenier LUX F4 HD Ultimate Flight Controller is full of features including a plug for DJI HD system, 3rd generation IMU ICM42688-P, dual plug-and-play 4in1 ESC ports, 12x PWM outputs, barometer, OSD, 6x UARTs, 9-16V BEC, dual analog camera inputs, easy soldering layout and much more...LUX H7 is compatible with:BetaflightArduPilotiNav (comes pre-loaded by default from factory)

The Lumenier LUX F4 HD Ultimate Flight Controller is full of features including a plug for DJI HD system, 3rd generation IMU ICM42688-P, dual plug-and-play 4in1 ESC ports, 12x PWM outputs, barometer, OSD, 6x UARTs, 9-16V BEC, dual analog camera input

Lumenier LUX F4 HD Ultimate Flight Controller 

T-Motor F7 Pro Full Function 30x30 Flight Controller - Wifi, Bluetooth

T-Motor has come out with one of the most advanced F7 flight controllers on the market. With 8 motor outputs, built-in Wi-Fi and Bluetooth, this FC is ready to take on even the most demanding of FPV tasks.
Browse our 30x30 Flight Controllers and all our T-Motor products!

Features

Wi-Fi
Bluetooth
Built-in blackbox for data logging
8 PWM outputs
DJI air unit plug

Specifications

MCU: STM32F722 RET6
IMU: BMI270
Barometer: BMP280
Input Voltage: 3-8S
BEC: 10V/2A, 5V/3A
OSD: AT7456
Blackbox: 16MB Flash
Motor Outputs: 8
UARTS: 6
Target: TMOTOR F7 V2
Dimensions: 37x37x7.5mm
Mounting Pattern: 30x30mm
Weight: 8.1g

Includes

1x T-Motor F7 Pro Full Function 30x30 Flight Controller







T-Motor has come out with one of the most advanced F7 flight controllers on the market. With 8 motor outputs, built-in Wi-Fi and Bluetooth, this FC is ready to take on even the most demanding of FPV tasks. Browse our 30x30 Flight Controllers and all our T-Motor products! Features Wi-Fi Bluetooth Built-in blackbox for d

T-Motor F7 Pro Full Function 30x30 Flight Controller w/ Wifi & Bluetooth from WREKD Co.

T-Motor F7 Pro Full Function 30x30 Flight Controller w/ Wifi & Bluetooth

T-Motor has come out with one of the most advanced F7 flight controllers on the market. With 8 motor outputs, built-in Wi-Fi and Bluetooth, this FC is ready to take on even the most demanding of FPV tasks.
Browse our 30x30 Flight Controllers and all our T-Motor products!

Features

Wi-Fi
Bluetooth
Built-in blackbox for data logging
8 PWM outputs
DJI air unit plug

Specifications

MCU: STM32F722 RET6
IMU: ICM42688
Barometer: BMP280
Input Voltage: 3-8S
BEC: 10V/2A, 5V/3A
OSD: AT7456
Blackbox: 16MB Flash
Motor Outputs: 8
UARTS: 6
Target: TMOTOR F7 V2
Dimensions: 37x37x7.5mm
Mounting Pattern: 30x30mm
Weight: 8.1g

Includes

1x T-Motor F7 Pro Full Function 30x30 Flight Controller







The T-Motor F7 Pro Full Function 30x30 Flight Controller w/ Wifi & Bluetooth is a high performance FC packed with features and convenience. This powerful FC is ready for anything.

T-Motor F7 Pro Full Function 30x30 Flight Controller w/ Wifi & Bluetooth for Sale

T-Motor's F7 Pro Flight Controller has arrived! Enjoy full function in a wireless state! Great for cinematic professional use. This FC features 8 UARTS, WiFi and Bluetooth capabilites, and a 30.5x30.5 mounting pattern.Now with ICM42688 gyro.

T-Motor's F7 Pro Flight Controller has arrived! Enjoy full function in a wireless state! Great for cinematic professional use. This FC features 8 UARTS, WiFi and Bluetooth capabilites, and a 30.5x30.5 mounting pattern.
Now with ICM42688 gyro.

T-Motor F7 PRO Flight Controller w/ WiFi + Bluetooth

T-Motor's F7 Pro flight controller has arrived! This flight controller is full featured and designed with Cinelifter quads in mind. It has eight PWM outputs all on one convenient connector and is plug and play with the DJI Air Unit using the included cable. The flight controller has built in Wi-Fi and Bluetooth so you 

T-Motor F7 Pro Flight Controller - 30x30mm

JHEMCU

JHEMCU NOXE F4 V2 Deluxe 20x20 Flight Controller For DJI

WREKD General

JHEMCU had a new flight controller aimed at those DJI pilots. This board comes feature-packed and ready for your next build.  The 20x20 form factor makes it a perfect fit for nearly any size drone and the 6s capability means that it will be able to keep up with your power needs. The deluxe version supports 16MB black box recording and features a barometer.
Check out our other 20x20 flight controllers, as well as the rest of our JHEMCU selection!
Specifications


Input Voltage: 3-6S LiPo


MCU: STM32F411


Gyro: MPU6000

OSD: Yes

UARTs: 2 Sets

ESC Connections: Yes

Firmware: JHEF411


BEC: 5V 3A, 10V 2A

Current Sensor: Yes
Buzzer: Yes
Barometer: Yes
Black Box: 16MB
DJI Compatible: Yes
Stack Size: 20x20

Dimensions: 27x27xmm


Weight: 4.5g


Includes

1x JHEMCU NOXE F4 V2 Deluxe 3-6S 20x20 Flight Controller


JHEMCU had a new flight controller aimed at those DJI pilots. This board comes feature-packed and ready for your next build.  The 20x20 form factor makes it a perfect fit for nearly any size drone and the 6s capability means that it will be able to keep up with your power needs. The deluxe version supports 16MB black b

JHEMCU NOXE F4 V2 Deluxe HD 3-6S 20x20 Flight Controller from WREKD Co.

JHEMCU NOXE F4 V2 Deluxe HD 3-6S 20x20 Flight Controller

The&nbspJHEMCU NOXE F4 V2 Flight Controller&nbspis made with DJI Pilots in mind. This Deluxe FC packs a 16MB Blackbox, Barometer, 2 UARTs, and BEC into a mini-sized 20x20 board with 3-6S capabilities!

The JHEMCU NOXE F4 V2 Flight Controller is made with DJI Pilots in mind. This Deluxe FC packs a 16MB Blackbox, Barometer, 2 UARTs, and BEC into a mini-sized 20x20 board with 3-6S capabilities!

JHEMCU NOXE F411 V2 DJI Flight Controller - Mini 20x20 - Deluxe

FPVELITE

JHEMCU had a new flight controller aimed at those DJI pilots. This board comes feature-packed and ready for your next build. The 20x20 form factor makes it a perfect fit for nearly any size drone and the 6s capability means that it will be able to keep up with your power needs. The deluxe version supports 16MB black box recording and features a barometer.

JHEMCU NOXE F4 V2 Deluxe 3-6S 20x20 Flight Controller For DJI - For Sale At RaceDayQuads

Matek F405-miniTE 20x20 Flight Controller

This new F405 board from Matek is packed with a 3rd Gen. 8K Gyro, Barometer, BFOSD, 16M Blackbox Flash Memory, and a convenient 20x20mm to 30x30mm adapter board which supports M2 or M3 hardware. It also has Dual BEC 5V and 10V to properly supply power to more amp hungry devices like the DJI Air Unit. And for those that

Matek F405-MINITE - 30x30mm or 20x20mm w/ 32K Gyro, Barometer, and BetaFlight OSD

Another solid choice in the Matek F405-miniTE 20x20 Flight Controller by a company that leads the pack when it comes to quality and performance.
Check out all our 20x20 FCs as well as the entire Matek selection!
Features

F405 has 1MB flash which can run with ArduPilot.  even with INAV firmware.
Redesigned target MATEKF405TE support 8x bi-directional DSHOT.
Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE supports 8motors+3servos in INAV/BF multirotor mixer
Convertible 20mm to 30.5mm mounting

Specifications

Input: 6~30V (2~6S LiPo)
MCU: STM32F405RGT6
IMU: ICM42688-P

OSD: AT7456E
Baro: Goertek SPL06-001 (I2C)
Blackbox: 16M-byte Flash memory
UARTs: 6
PWM outputs: 12 (8 Dshot)
I2C: 1
ADC: 4 (VBAT, Current, RSSI, Airspeed)
Current Sensor: No
PINIO: 2
BEC: 5V 1.7A &ampamp 10V 1.4A
Mounting Pattern: 20x20 M2/M3, 30X30 M3
Weight: 5g

Includes

1x Matek F405-miniTE 20x20 Flight Controller
1x 20mm to 30mm conversion plate(blue PCB)
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit


Another solid choice in the Matek F405-miniTE 20x20 Flight Controller by a company that leads the pack when it comes to quality and performance. Check out all our 20x20 FCs as well as the entire Matek selection! Features F405 has 1MB flash which can run with ArduPilot.  even with INAV firmware. Redesigned target MATEKF

Matek F405-miniTE 20x20 Flight Controller from WREKD Co.

MATEK

Another solid choice in the Matek F405-miniTE 20x20 Flight Controller by a company that leads the pack when it comes to quality and performance.
Check out all our 20x20 FCs as well as the entire Matek selection!
Features

F405 has 1MB flash which can run with ArduPilot.  even with INAV firmware.
Redesigned target MATEKF405TE support 8x bi-directional DSHOT.
Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE supports 8motors+3servos in INAV/BF multirotor mixer
Convertible 20mm to 30.5mm mounting

Specifications

Input: 6~30V (2~6S LiPo)
MCU: STM32F405RGT6
IMU: ICM42688-P

OSD: AT7456E
Baro: Goertek SPL06-001 (I2C)
Blackbox: 16M-byte Flash memory
UARTs: 6
PWM outputs: 12 (8 Dshot)
I2C: 1
ADC: 4 (VBAT, Current, RSSI, Airspeed)
Current Sensor: No
PINIO: 2
BEC: 5V 1.7A &amp 10V 1.4A
Mounting Pattern: 20x20 M2/M3, 30X30 M3
Weight: 5g

Includes

1x Matek F405-miniTE 20x20 Flight Controller
1x 20mm to 30mm conversion plate(blue PCB)
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit


The Matek F405-miniTE 20x20 Flight Controller is yet another solid addition to our 20x20 lineup. Matek leads the pack when it comes to 20x20 quality and performance.

Matek F405-miniTE 20x20 Flight Controller for Sale - RaceDayQuads

The&nbspF405 MiniTE Flight Controller&nbspwas designed to be smaller and lighter than its bigger brother, and the 20x20mm mount allows for more space to work with on your build.

The F405 MiniTE Flight Controller was designed to be smaller and lighter than its bigger brother, and the 20x20mm mount allows for more space to work with on your build.

MATEKSYS F405-MiniTE Flight Controller - Mini 20x20

T-Motor Mini Racer F7 20x20 Flight Controller

The new T-Motor F7 Racer FC is designed specifically for thight builds such as race frames, The front portion of the FC is recessed to provide clearance for the FPV Camera.Check out the 20x20mm Flight Controllers and all our T-Motor Products!     Specifications Input Voltage: 3-6S MCU: STM32F722RET6 OSD: AT7456E Uarts:

T-Motor Mini Racer F7 Flight Controller - 20x20mm

T-Motor enters the world of Flight Controllers yet again with another that is sure to impress! 
Check out all our 20x20 FCs and all our T-Motor products!
Specifications

Input Voltage: 3-6S
MCU: STM32F722RET6
OSD: AT7456E
Uarts: 4
BEC: 5V/2A(Peak 2.5A)
Blackbox: 16MB
Gyro: BMI270
Dimensions: 31*30mm
Stack Size: 20*20mm

Includes

1x T-Motor Mini Racer F7 20x20 Flight Controller





Wiring Diagram


T-Motor enters the world of Flight Controllers yet again with another that is sure to impress!  Check out all our 20x20 FCs and all our T-Motor products! Specifications Input Voltage: 3-6S MCU: STM32F722RET6 OSD: AT7456E Uarts: 4 BEC: 5V/2A(Peak 2.5A) Blackbox: 16MB Gyro: BMI270 Dimensions: 31*30mm Stack Size: 20*20mm 

T-Motor Mini Racer F7 20x20 Flight Controller from WREKD Co.

The&nbspT-Motor Mini Racer F7&nbspis a 3-6S 20x20 mini flight controller with a 16MB Blackbox flash memory, 5V.2A BEC, and an MPU6000 gyro. Designed for easy maintenance and low interference.&nbsp

The T-Motor Mini Racer F7 is a 3-6S 20x20 mini flight controller with a 16MB Blackbox flash memory, 5V.2A BEC, and an MPU6000 gyro. Designed for easy maintenance and low interference. 

T-Motor Mini Racer 20x20 F7 Flight Controller

JHEMCU NOXE F4 V2 Standard 3-6S 20x20 Flight Controller For DJI

New 20x20mm flight controller line from JHEMCU available as standard and deluxe.Deluxe verion features blackbox and barometer. Standard: No BarometerDeluxe: With Baromete Check out all our 20x20mm Flight Controllers and the rest of our JHEMCU Products! Specifications: JHEMCU F4 NOXE 3-6S 20*20 Flight Controller for DJI

JHEMCU NOXE F4 V2 Standard 3-6S V2 Flight Controller For DJI - 20x20mm

The&nbspJHEMCU NOXE F4 V2 Flight Controller&nbspis made with DJI Pilots in mind. This standard version FC packs 2 UARTs, and a BEC into a mini-sized 20x20 board with 3-6S capabilities!

The JHEMCU NOXE F4 V2 Flight Controller is made with DJI Pilots in mind. This standard version FC packs 2 UARTs, and a BEC into a mini-sized 20x20 board with 3-6S capabilities!

JHEMCU NOXE F411 V2 DJI Flight Controller - Mini 20x20 - Standard

Hobbywing

Hobbywing XRotor F7 Convertible Flight Controller

Take a look at the XRotor F7 Convertible Flight Controller from Hobbywing. This FC is similar to other versions with its OSD, and voltage monitoring, but the F7 now comes with an all-new 5V &ampamp 12V dual BEC Circuit and a special interface for the DJI image transmission system. The XRotor F7 Convertible flight controller is equipped with STM32F722 MCU which has a powerful computing ability and fast running speed. High sensitivity ICM20602 six-axis motion sensor, built-in 5V &ampamp 12V double BEC, integrated OSD, and a pitch module.  
Check out our other flight controllers, and our Hobbywing selection!
Features

Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity MPU6500 six-axis motion sensor.

Supports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.
DJI image transmission system port equipped with corresponding flat cable
Supports bidirectional DShot digital throttle communication.
Unique installation design and shock absorption structure.
On-board large capacity Flash memory chip.
On-board 5V &ampamp 12V dual BEC circuit.
On-board Pit Switch module.










Specifications

Firmware: HOBBYWING_XROTORF7CONV

FC Programming: Supported
Programming via Betaflight/ Cleanflight-configurator
Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, PROSHOT1000
Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
OSD Built-in

Input Voltage: 3-6S

Gyro: MPU6500
Voltage Monitoring Supported
Current Monitoring Supported
External Buzzer Supported
LED Control Supported
BEC 5V @ 1.5A  10V @ 1.5A
Mounting Pattern: 20x20mm M3 / 30x30mm M3
Size 32x32mm
Weight 3.3g

 Manual Download

Includes

1x Hobbywing XRotor F7 3-6S 20x20 / 30x30 Convertible Flight Controller
1x Soft Mounting Grommets Set
1x Signal Cable
1x User Manual


Take a look at the XRotor F7 Convertible Flight Controller from Hobbywing. This FC is similar to other versions with its OSD, and voltage monitoring, but the F7 now comes with an all-new 5V &amp; 12V dual BEC Circuit and a special interface for the DJI image transmission system. The XRotor F7 Convertible flight control

Hobbywing XRotor F7 3-6S 20x20 / 30x30 Convertible Flight Controller from WREKD Co.

Hobbywing XRotor F7 3-6S 20x20 / 30x30 Convertible Flight Controller


Take a look at the XRotor F7 Convertible Flight Controller from Hobbywing. This FC is similar to other versions with its OSD, and voltage monitoring, but the F7 now comes with an all-new 5V &ampamp 12V dual BEC Circuit and a special interface for the DJI image transmission system. The XRotor F7 Convertible flight controller is equipped with STM32F722 MCU which has a powerful computing ability and fast running speed. High sensitivity MPU6500 six-axis motion sensor, built-in 5V &ampamp 12V double BEC, integrated OSD, and a pitch module.
Features

Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity MPU6500 six-axis motion sensor.

Supports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.
DJI image transmission system port equipped with corresponding flat cable
Supports bidirectional DShot digital throttle communication.
Unique installation design and shock absorption structure.
On-board large capacity Flash memory chip.
On-board 5V &ampamp 12V dual BEC circuit.
On-board Pit Switch module.


 
 


Specifications

Firmware: HOBBYWING_XROTORF7CONV

FC Programming: Supported
Programming via Betaflight/ Cleanflight-configurator
Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, PROSHOT1000
Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
OSD Built-in

Input Voltage: 3-6S

Gyro: MPU6500
Voltage Monitoring Supported
Current Monitoring Supported
External Buzzer Supported
LED Control Supported
BEC 5V @ 1.5A  10V @ 1.5A
Mounting Pattern: 20x20mm M3 / 30x30mm M3
Size 32x32mm
Weight 3.3g

 Manual Download

Includes

1 x Hobbywing XRotor F7 3-6S 20x20 / 30x30 Convertible Flight Controller
1 x Soft Mounting Grommets Set
1 x Signal Cable
1 x User Manual


HOBBYWING

Take a look at the XRotor F7 Convertible Flight Controller from Hobbywing. This FC is similar to other versions with its OSD, and voltage monitoring, but the F7 now comes with an all-new 5V &amp 12V dual BEC Circuit and a special interface for the DJI image transmission system. The XRotor F7 Convertible flight controller is equipped with STM32F722 MCU which has a powerful computing ability and fast running speed. High sensitivity ICM20602 six-axis motion sensor, built-in 5V &amp 12V double BEC, integrated OSD, and a pitch module.  
Check out our other flight controllers, and our Hobbywing selection!
Features

Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity MPU6500 six-axis motion sensor.

Supports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.
DJI image transmission system port equipped with corresponding flat cable
Supports bidirectional DShot digital throttle communication.
Unique installation design and shock absorption structure.
On-board large capacity Flash memory chip.
On-board 5V &amp 12V dual BEC circuit.
On-board Pit Switch module.










Specifications

Firmware: HOBBYWING_XROTORF7CONV

FC Programming: Supported
Programming via Betaflight/ Cleanflight-configurator
Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, PROSHOT1000
Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
OSD Built-in

Input Voltage: 3-6S

Gyro: MPU6500
Voltage Monitoring Supported
Current Monitoring Supported
External Buzzer Supported
LED Control Supported
BEC 5V @ 1.5A  10V @ 1.5A
Mounting Pattern: 20x20mm M3 / 30x30mm M3
Size 32x32mm
Weight 3.3g

 Manual Download

Includes

1x Hobbywing XRotor F7 3-6S 20x20 / 30x30 Convertible Flight Controller
1x Soft Mounting Grommets Set
1x Signal Cable
1x User Manual


The XRotor F7 Convertible Flight Controller from Hobbywing continues to impress with its latest iteration. The F7 now comes with an all-new 5V & 12V dual BEC Circuit and a special interface for the DJI image transmission system. The mounting pattern is convertible between 20x20 and 30.5x30.5!

The XRotor F7 Convertible Flight Controller from Hobbywing continues to impress with its latest iteration. The F7 now comes with an all-new 5V & 12V dual BEC Circuit and a special interface for the DJI image transmission system. The mounting pattern 

HobbyWing

With DJI image transmission system port, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.

HobbyWing Convertible F7 Flight Controller - RMRC

HobbyWing Convertible F7 Flight Controller

The new Hobbywing convertable F7 flight controller is equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional D-Shot digital throttle communication. The integrated OSD chip can adjust and set ea

HobbyWing XRotor Convertible F7 Flight Controller HD DJI Plug and Play - 30x30 & 20x20mm

Matek H743-Mini 20x20 Flight Controller

Matek H743-MINI Flight Controller features STM32H743VIT6, ICM20602 & MPU6000, DPS310, OSD, 5.5x UARTs, 2x I2C, 1x CAN, 11x PWM outputs, BEC5V and BEC8V.

MATEKSYS H743-MINI Flight Controller

Matek Flight Controller H743-MINI V3 - RMRC

Matek Flight Controller H743-MINI V3

Matek H743-Slim 30x30 Flight Controller

﻿Packed with features, the H743-Slim from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot.
Check out our 30x30 Flight Controllers as well as the entire Matek selection!
Specifications
FC Specifications

Brand name: Matek Systems
Item name: H743-SLIM Flight Controller
MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash
IMU: ICM42688P &ampamp ICM42605
Baro: Infineon DPS310 (I2C2)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card socket (SDIO)
7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
13x PWM outputs(including “LED” pad)
2x I2C
1x CAN
6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
1x SPI3 break0ut
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
Dual Camera Inputs switch
5V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART

Power

Vbat Input: 6~36V (2~8S LiPo)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
No Current Sensor built-in
ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
Static power: 200mA@5V with Betaflight,  150mA@5V with ArduPilot

FC Firmware

ArduPilot(ChiBiOS): MATEKH743
BetaFlight: MATEKH743
INAV: MATEKH743 (To be supported soon)

Physical

Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 36 x 36 x 5 mm
Weight: 7g

Includes

1x Matek H743 Slim 30x30 Flight Controller

Wiring Diagram
QA:
ArduPilot Relay(PINIO


Camera-1 and Vsw On by default
Make sure 2 cameras are set with identical video format, both PAL or both NTSC.


# GPIOs



PD10 PINIO1 OUTPUT GPIO(81)   //Vsw pad power switch
PD11 PINIO2 OUTPUT GPIO(82)   //Camera switch



# RCx_OPTION: RC input option



28   Relay On/Off
34   Relay2 On/Off
35   Relay3 On/Off
36   Relay4 On/Off



e.g.



RELAY_PIN       81    //Vsw GPIO
RC7_OPTION   28    //Relay On/Off, Use CH7 of Transmitter to switch Vsw
RELAY_PIN2     82    //Camera switch GPIO
RC8_OPTION   34    //Relay2 On/Off, Use CH8 of Transmitter to switch camera



or



RELAY_PIN3       81    //Vsw GPIO
RC9_OPTION     35    //Relay3 On/Off, Use CH9 of Transmitter to switch Vsw
RELAY_PIN4       82    //Camera switch GPIO
RC10_OPTION   36    //Relay4 On/Off, Use CH10 of Transmitter to switch camera



The configured feature will be triggered when the auxiliary switch’s pwm value becomes higher than 1800. It will be deactivated when the value falls below 1200.
Check the pwm value sent from the transmitter when the switch is high and low using the Mission Planner’s Initial Setup &ampgt&ampgt Mandatory Hardware &ampgt&ampgt Radio Calibration screen. If it does not climb higher than 1800 or lower than 1200, it is best to adjust the servo end points in the transmitter.

Tips


ArduPilot Firmware

https://firmware.ardupilot.org/Plane/stable/MatekH743/
https://firmware.ardupilot.org/Copter/stable/MatekH743/


INAV is expected to support H743 in 2.6.
H743-SLIM has betaflight firmware preloaded for QC
BetaFlight target is not on the Github, pls download BetaFlight firmware from our website.
If you flash ArduPilot firmware via BetaFlight configurator.  there is a known issue that flash process will freeze at 50% if “full chip erase” is selected.   Disable full chip erase when flashing,  then reset to default in Mission Planner after flashing.
It is highly recommended to use STM32CubeProgrammer to erase MCU and upload firmware http://www.mateksys.com/?p=6905

 




﻿Packed with features, the H743-Slim from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot. Check out our 30x30 Flight Controllers as well as the entire Matek selection! Specifications FC Specifications Brand name: Matek Systems Item name: H743-SLIM Flight Controller MCU: STM32H743VIH6, 480MHz , 1M

Matek H743 Slim V3 30x30 Flight Controller from WREKD Co.

Matek H743 Slim V3 30x30 Flight Controller

The&nbspMatek H743-SLIM Flight Controller features&nbspSTM32H743VI, ICM42605 &amp MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V and other cool features!

The Matek H743-SLIM Flight Controller features STM32H743VI, ICM42605 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V and other cool features!

MATEKSYS H743-SLIM Flight Controller

﻿Packed with features, the H743-Slim from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot.
Check out our 30x30 Flight Controllers as well as the entire Matek selection!
Specifications
FC Specifications

Brand name: Matek Systems
Item name: H743-SLIM Flight Controller
MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash
IMU: ICM42688P &amp ICM42605
Baro: Infineon DPS310 (I2C2)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card socket (SDIO)
7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
13x PWM outputs(including “LED” pad)
2x I2C
1x CAN
6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
1x SPI3 break0ut
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
Dual Camera Inputs switch
5V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART

Power

Vbat Input: 6~36V (2~8S LiPo)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
No Current Sensor built-in
ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
Static power: 200mA@5V with Betaflight,  150mA@5V with ArduPilot

FC Firmware

ArduPilot(ChiBiOS): MATEKH743
BetaFlight: MATEKH743
INAV: MATEKH743 (To be supported soon)

Physical

Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 36 x 36 x 5 mm
Weight: 7g

Includes

1x Matek H743 Slim 30x30 Flight Controller

Wiring Diagram
QA:
ArduPilot Relay(PINIO


Camera-1 and Vsw On by default
Make sure 2 cameras are set with identical video format, both PAL or both NTSC.


# GPIOs



PD10 PINIO1 OUTPUT GPIO(81)   //Vsw pad power switch
PD11 PINIO2 OUTPUT GPIO(82)   //Camera switch



# RCx_OPTION: RC input option



28   Relay On/Off
34   Relay2 On/Off
35   Relay3 On/Off
36   Relay4 On/Off



e.g.



RELAY_PIN       81    //Vsw GPIO
RC7_OPTION   28    //Relay On/Off, Use CH7 of Transmitter to switch Vsw
RELAY_PIN2     82    //Camera switch GPIO
RC8_OPTION   34    //Relay2 On/Off, Use CH8 of Transmitter to switch camera



or



RELAY_PIN3       81    //Vsw GPIO
RC9_OPTION     35    //Relay3 On/Off, Use CH9 of Transmitter to switch Vsw
RELAY_PIN4       82    //Camera switch GPIO
RC10_OPTION   36    //Relay4 On/Off, Use CH10 of Transmitter to switch camera



The configured feature will be triggered when the auxiliary switch’s pwm value becomes higher than 1800. It will be deactivated when the value falls below 1200.
Check the pwm value sent from the transmitter when the switch is high and low using the Mission Planner’s Initial Setup &gt&gt Mandatory Hardware &gt&gt Radio Calibration screen. If it does not climb higher than 1800 or lower than 1200, it is best to adjust the servo end points in the transmitter.

Tips


ArduPilot Firmware

https://firmware.ardupilot.org/Plane/stable/MatekH743/
https://firmware.ardupilot.org/Copter/stable/MatekH743/


INAV is expected to support H743 in 2.6.
H743-SLIM has betaflight firmware preloaded for QC
BetaFlight target is not on the Github, pls download BetaFlight firmware from our website.
If you flash ArduPilot firmware via BetaFlight configurator.  there is a known issue that flash process will freeze at 50% if “full chip erase” is selected.   Disable full chip erase when flashing,  then reset to default in Mission Planner after flashing.
It is highly recommended to use STM32CubeProgrammer to erase MCU and upload firmware http://www.mateksys.com/?p=6905

 


