FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

EMAX

EMAX Nanohawk F4 5A 1S AIO Flight Controller

This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop! Also a great choice for building your own whoops!
Check out all our whoop flight controllers and the rest of our EMAX selection! 
Specifications

MCU: F4
Input: 1S only

Continuous current: 5A
Gyro: MPU6000
USB: Micro USB
ESC: BlHeli S

VTX: 25mW

Includes

1x Emax Nanohawk 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 25mW VTX - MPU6000 
1x GNB27 Female power lead


This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop! Also a great choice for building your own whoops! Check out all our whoop flight controllers and the rest of our EMAX selection!  Specifications MCU: F4 Input: 1S only Continuous current: 5A Gyro: MPU6000 USB: Micro USB ESC: BlHeli S 

Emax Nanohawk 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 25mW VTX - MPU6000

Emax Nanohawk 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 25mW V

A replacement or spare F4 AIO flight controller for the&nbspEMAX Nanohawk 1S Micro Brushless FPV Drone.

A replacement or spare F4 AIO flight controller for the EMAX Nanohawk 1S Micro Brushless FPV Drone.

EMAX Nanohawk F4 5A 1S BL_S AIO Flight Controller 

Processor (MCU)

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 

Flight Controllers

FC Stack Mount

Built-in VTX

Built-in ESC

NewBeeDrone

NewBeeDrone BeeBrain BLV4 AIO Flight Controller - 12A ESC, 2.4GHz ELRS

The BeeBrain BLV4 AIO Flight Controller integrates an F411 flight controller, a 12AMP 4-In-1 BLHeli_S ESC, a 5.8GHz VTX, and an ELRS receiver onto a compact 29x29mm platform.

NewBeeDrone BeeBrain BLV4 AIO - F411 FC + 12A 1-2S BLHeli_S ESC + Built-In ELRS 2.4GHz

NewBeeDrone BeeBrain BLV4 AIO Flight Controller ExpressLRS (ELRS) 2.4G
 
Warning! The BeeBrainBLV4 OSD might not compatible with third party camera. If you are planning to use it for customized build, Please be aware it only support the camera below: 
How to Video:Internal ELRS Rx Firmware flashing: 
NewBeeDrone BeeEye CameraRuncam Nano4 
Specifications

STM32F411 MCU
ESC Firmware: S-H-40 - Bluejay, 0.16, 48kHz.
ESC Specifications: 4 channel 12A ESC
ESC Connector: JST-1.0 3Pin
NBD OSD (Betaflight OSD Compatible)
Weight: 6.5 grams (including antennas and battery connector)
Size: Outer dimensions 29 x 29 x 7.6 mm
Holes: 25.5 x 25.5 mm
Battery input: 1S
Connector: PH2.0
UART2 TX and RX for onboard EXPRESSLRS receiver (SX1280)
UART1 TX and RX free
VTX Adjustble power: 5mW-25mW-SmartMAX. SmartMAX will automatically adjust the VTX power according to the board temperature. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW

Includes

1 x BeeBrain BLV4 Flight Controller
4 x Grommet
4 x Screw

1 x Receiver T-Antennas 


1 x Receiver Antennas


1 x VTX Antenna


Firmware: 1. ELRS Receiver firmware can be found here. Vendor choose NewBeeDrone2. BeeBrain blv4 ELRS Betaflight 4.4 firmware
All new firmware can be found on our Github Page
 Note: Binding process. power up the drone 3 times, on the third time you plug in power, the ELRS Receiver will get into binding mode. We are still trying to work on the ELRS firmware and make it able to just click the boot button to get into bind mode. Will get this update in the near future. Check out the video below CiottiFPV show you how to get into bind mode. - Thanks bro for showing this. lol 






NewBeeDrone BeeBrain BLV4 AIO Flight Controller ExpressLRS (ELRS) 2.4G   Warning! The BeeBrainBLV4 OSD might not compatible with third party camera. If you are planning to use it for customized build, Please be aware it only support the camera below:  How to Video:Internal ELRS Rx Firmware flashing: NewBeeDrone BeeEye 

NewBeeDrone BeeBrain BLV4 AIO Flight Controller  ExpressLRS(ELRS) 2.4G

NewBeeDrone BeeBrain BLV4 AIO Flight Controller ExpressLRS(ELRS) 2.4G

NewBeeDrone BeeBrain BLV4 AIO Flight Controller  ExpressLRS(ELRS) 2.4G from WREKD Co.

NewBeeDrone x Team BlackSheep BeeBrain BLV4 AIO Flight Controller - 12A ESC, Crossfire Rx

NEWBEEDRONE

The NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller provides optimal performance for pilots who want a compact build. This single board is equipped with a flight controller, 12A 32Bit 4in1 ESC, 5.8GHz VTX, and a TBS Crossfire receiver, all on a 29x29mm platform. Enjoy advanced features and excellent performance for your compact setup! 
The new "Smart Max" technology uses the MCU to read the board temperature on the back of the VTEC chip and uses PID control to control the output power of the VTX amplifier. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW. If
Check out all our Whoop/AIO Flight Controllers and the rest of our NewBeeDrone products.
Features

Built-In TBS Crossfire Nano Receiver
SmartMAX (SmartMax up to 400mw) 
25x25 Mounting Pattern
5w/25w Switchable VTX
F411 Flight Controller
12A BLHeli_S ESC
1-2S Voltage
BMI270 Gyro

Specifications

MCU: STM32F411
GYRO：BMI270
VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS Pre-Flash with Bluejay 0.18 target: S-H-40 48kHz
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: Crossfire Nano receiver with MINIMORTAL T ANTENNA
Flight Controller Weight: 6.5g(Include antennas and battery connector)
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1-2S (For 2S you will need to set throttle cap at less 50%)
Uart2: Crossfire Nano receiver 
Power Connector: NBD-PH2.0 connector

Additional Information

UART2 TX and RX for onboard Crossfire (CRSF)

UART1 TX and RX free

VTX Adjustable power 5mW-25mW-SmartMAX. SmartMAX will automatically adjust the VTX power according to the board temperature. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW.

Firmware 

Download: BeeBrain BLV4 CRSF Betaflight 4.4 firmware


Includes

1x NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller w/ 12A 8Bit 4in1 ESC &amp 400mW VTX - CRSF
4x Grommet
4x Screw

1x Receiver T-Antennas 


1x Receiver Mono Pole Antenna


1x VTX Antenna


Wiring Diagram 


The NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller provides optimal performance for pilots who want a compact build. This single board is equipped with a flight controller, 12A 32Bit 4in1 ESC, 5.8GHz VTX, and a TBS Crossfire receiver, all on a 29x29mm platform. Enjoy advanced features and exc

NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller w/ 12A 8Bit 4in1 ESC & 400mW VTX - CRSF

NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Control

NewBeeDrone x Team BlackSheep BeeBrain BLV4 Built in Crossfire Rx
Warning:

We would like to remind you that our flight controller product is designed to work with our own product line. While we have taken every possible measure to ensure the quality and compatibility of our product line, using third party components may result in incompatibility or improper functioning of the product. such as Camere with different voltage signal will mass up the OSD function, frame from other company that is not fitting well with our FC, Motor plug are not compatible with the JST1.0 on the FC. etc. 
We strongly recommend that you verify the compatibility and functioning before any soldering or modification. 

Please be aware, drone flight controller will break due to crash, any physical damage or crash will have posibility to destory the hardware. This is also not cover by our warranty.  If you find that the product is Dead On Arrival (DOA), we will replace it for you free of charge.
However, we cannot take responsibility for any issues that may arise due to modifications made to the product or the use 3rd party components. In such cases, we will not be able to provide support or warranty coverage. 

Thank you for your understanding and for choosing our product. If you have any questions or concerns, please don&#39t hesitate to contact our customer support team.
This product is designed mainly to be a replacement part for the NewBeeDrone x Team BlackSheep AcroBee65 BLV4 Crossfire. 

BeeBrain BLV4 CRSF Spec:
MCU: STM32F411GYRO：BMI270VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw)  with BeeTX 5.8Ghz AntennaESC: 12A BLHeliS Pre-Flash with Bluejay 0.18 target: S-H-40 48kHzESC Connector: JST-1.0 3PinOSD: NBD7456 Graphical OSD compatible with Betaflight OSDReceiver: Crossfire Nano receiver with MINIMORTAL T ANTENNAFlight Controller Weight: 6.5g(Include antennas and battery connector)Flight Controller Size: Outer dimensions: 29x29x7.6mmFlight Controller Holes: 25.5x25.5mmBattery input: 1SUart2: Crossfire Nano receiver 
Power Connector: NBD-PH2.0 connector
Includes


1 x BeeBrain BLV4 CRSF Flight Controller
4 x Grommet
4 x Screw

1 x MINIMORTAL T Antenna
1 x VTX Antenna




Firmware: 1. BeeBrain BLV4 CRSF Betaflight 4.4  firmware 
All New firmware can be found on our Github Page

All firmware can be found on our Github PageWire Diagram:
 

NewBeeDrone x Team BlackSheep BeeBrain BLV4 Built in Crossfire Rx Warning: We would like to remind you that our flight controller product is designed to work with our own product line. While we have taken every possible measure to ensure the quality and compatibility of our product line, using third party components ma

NewBeeDrone x Team BlackSheep BeeBrain BLV4 Built-in Crossfire Rx AIO Flight Controller from WREKD Co.

NewBeeDrone x Team BlackSheep BeeBrain BLV4 Built-in Crossfire Rx AIO Flight Controller

The BeeBrain BLV4 AIO Flight Controller integrates an F411 flight controller, a 12AMP 4-In-1 BLHeli_S ESC, a 5.8GHz VTX, and a TBS Crossfire receiver onto a compact 29x29mm platform.

NewBeeDrone BeeBrain BLV4 AIO - F411 FC + 12A 1-2S BLHeli_S ESC + Built-In TBS Crossfire

NewBeeDrone x Team BlackSheep BeeBrain BLV4 Built in Crossfire Rx
Warning:

We would like to remind you that our flight controller product is designed to work with our own product line. While we have taken every possible measure to ensure the quality and compatibility of our product line, using third party components may result in incompatibility or improper functioning of the product. such as Camere with different voltage signal will mass up the OSD function, frame from other company that is not fitting well with our FC, Motor plug are not compatible with the JST1.0 on the FC. etc. 
We strongly recommend that you verify the compatibility and functioning before any soldering or modification. 

Please be aware, drone flight controller will break due to crash, any physical damage or crash will have posibility to destory the hardware. This is also not cover by our warranty.  If you find that the product is Dead On Arrival (DOA), we will replace it for you free of charge.
However, we cannot take responsibility for any issues that may arise due to modifications made to the product or the use 3rd party components. In such cases, we will not be able to provide support or warranty coverage. 

Thank you for your understanding and for choosing our product. If you have any questions or concerns, please don't hesitate to contact our customer support team.
This product is designed mainly to be a replacement part for the NewBeeDrone x Team BlackSheep AcroBee65 BLV4 Crossfire. 

BeeBrain BLV4 CRSF Spec:
MCU: STM32F411GYRO：BMI270VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw)  with BeeTX 5.8Ghz AntennaESC: 12A BLHeliS Pre-Flash with Bluejay 0.18 target: S-H-40 48kHzESC Connector: JST-1.0 3PinOSD: NBD7456 Graphical OSD compatible with Betaflight OSDReceiver: Crossfire Nano receiver with MINIMORTAL T ANTENNAFlight Controller Weight: 6.5g(Include antennas and battery connector)Flight Controller Size: Outer dimensions: 29x29x7.6mmFlight Controller Holes: 25.5x25.5mmBattery input: 1SUart2: Crossfire Nano receiver 
Power Connector: NBD-PH2.0 connector
Includes


1 x BeeBrain BLV4 CRSF Flight Controller
4 x Grommet
4 x Screw

1 x MINIMORTAL T Antenna
1 x VTX Antenna




Firmware: 1. BeeBrain BLV4 CRSF Betaflight 4.4  firmware 
All New firmware can be found on our Github Page

All firmware can be found on our Github PageWire Diagram:
 

NewBeeDrone x Team BlackSheep BeeBrain BLV4 Built-in Crossfire Rx AIO 

The NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller provides optimal performance for pilots who want a compact build. This single board is equipped with a flight controller, 12A 32Bit 4in1 ESC, 5.8GHz VTX, and a TBS Crossfire receiver, all on a 29x29mm platform. Enjoy advanced features and excellent performance for your compact setup! 
The new &quotSmart Max&quot technology uses the MCU to read the board temperature on the back of the VTEC chip and uses PID control to control the output power of the VTX amplifier. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW. If
Check out all our Whoop/AIO Flight Controllers and the rest of our NewBeeDrone products.
Features

Built-In TBS Crossfire Nano Receiver
SmartMAX (SmartMax up to 400mw) 
25x25 Mounting Pattern
5w/25w Switchable VTX
F411 Flight Controller
12A BLHeli_S ESC
1-2S Voltage
BMI270 Gyro

Specifications

MCU: STM32F411
GYRO：BMI270
VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS Pre-Flash with Bluejay 0.18 target: S-H-40 48kHz
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: Crossfire Nano receiver with MINIMORTAL T ANTENNA
Flight Controller Weight: 6.5g(Include antennas and battery connector)
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1-2S (For 2S you will need to set throttle cap at less 50%)
Uart2: Crossfire Nano receiver 
Power Connector: NBD-PH2.0 connector

Additional Information

UART2 TX and RX for onboard Crossfire (CRSF)

UART1 TX and RX free

VTX Adjustable power 5mW-25mW-SmartMAX. SmartMAX will automatically adjust the VTX power according to the board temperature. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW.

Firmware 

Download: BeeBrain BLV4 CRSF Betaflight 4.4 firmware


Includes

1x NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller w/ 12A 8Bit 4in1 ESC &ampamp 400mW VTX - CRSF
4x Grommet
4x Screw

1x Receiver T-Antennas 


1x Receiver Mono Pole Antenna


1x VTX Antenna


Wiring Diagram 


NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller w/ 12A 8Bit 4in1 ESC & 400mW VTX - CRSF from WREKD Co.

HGLRC

HGLRC SPECTER F722 4-6S AIO Flight Controller - 40A 8Bit 4in1 ESC

The HGLRC Specter F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) comes with an STM32F722 processor, MPU6000 gyroscope, a camera, receiver, and HD/analog direct plug-in interface. Friendly and approachable, it&#39s designed to make your flying experience the best.























Check out all of our HGLRC products and all our whoop flight controllers.
Features

Equipped with MPU6000 gyroscope
Camera, receiver, HD/ analog two-in-one direct plug interface
Supports GPS
Supports Bluejay


Specifications

Product name: SPECTER 40A 4-6S AIO

MCU: STM32F722

MPU: MPU6000

BEC: 5V2A

OSD: Support

LED: Support

Bee Narrator: Support

Continuous current: 40A

Peak current: 50A (10S)

Electrochemical protocol: DSHOT600, Oneshot, Multishot

Flying control firmware: HGLRCF722AIO

Electrochemical firmware: BLS (Bluejay 96K)

ESC: 8Bit

Input voltage: 4-6S 14.8V-22.2V (lipo)

Size: 34x34mm

Install holes: 25.5x25.5mm - M2

Weight: 9.8g

Include

1x HGLRC Specter F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) - MPU6000 


The HGLRC Specter F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) comes with an STM32F722 processor, MPU6000 gyroscope, a camera, receiver, and HD/analog direct plug-in interface. Friendly and approachable, it's designed to make your flying experience the best. Check out all of our HGLRC products

HGLRC SPECTER F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) - MPU6000 from WREKD Co.

HGLRC SPECTER F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) - MPU6000

The HGLRC Specter F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) comes with an STM32F722 processor, MPU6000 gyroscope, a camera, receiver, and HD/analog direct plug-in interface. Friendly and approachable, it's designed to make your flying experience the best.























Check out all of our HGLRC products and all our whoop flight controllers.
Features

Equipped with MPU6000 gyroscope
Camera, receiver, HD/ analog two-in-one direct plug interface
Supports GPS
Supports Bluejay


Specifications

Product name: SPECTER 40A 4-6S AIO

MCU: STM32F722

MPU: MPU6000

BEC: 5V2A

OSD: Support

LED: Support

Bee Narrator: Support

Continuous current: 40A

Peak current: 50A (10S)

Electrochemical protocol: DSHOT600, Oneshot, Multishot

Flying control firmware: HGLRCF722AIO

Electrochemical firmware: BLS (Bluejay 96K)

ESC: 8Bit

Input voltage: 4-6S 14.8V-22.2V (lipo)

Size: 34x34mm

Install holes: 25.5x25.5mm - M2

Weight: 9.8g

Include

1x HGLRC Specter F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) - MPU6000 


HGLRC SPECTER F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 

The HGLRC Specter 40A 4-6S AIO - MPU6000 is a high-performance all-in-one flight controller, integrating advanced control and gyroscopic features.

HGLRC Specter AIO - F722 FC + 40A 4-6S ESC - MPU6000

SpeedyBee

SpeedyBee F745 AIO Flight Controller - F745 FC, 35A 3-6S ESC

Check out all our 30x30mm Stacks and the rest of our SpeedyBee Products! Overview: Product Name SpeedyBee F745 35A BLS AIO Power Input 3S - 6S Lipo Mounting 25.5 x 25.5mm, 3mm hole diameter Dimension 36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5" or above Weight 10.1g FC Specifications:  MCU STM32F745 IM

SpeedyBee F745 35A BLHeli_S 3-6S AIO Flight Controller/ESC - 25.5x25.5mm

The SpeedyBee F745 AIO includes an F745 flight controller and a 35A ESC. Featuring a BMP280 barometer, OSD, 8MB Memory Blackbox, and MPU600 Gyro... this AIO board is the perfect addition to your FPV build.

SpeedyBee F745 AIO Board - F745 FC + 35A BLHeli_S 3-6S ESC

Aikon

Aikon F7 3-6S AIO Flight Controller - 60A 8bit ESC

The Aikon flight controller is a new generation flight controller and ESC combination specifically designed for cinewhoops and other high-current applications. We've packed all the greatest features into one seamless flight experience. Check out all our Whoop Style AIO Boards and the rest of our Aikon Products! Feature

Aikon F7 60A BLHeli_S All-In-One Flight Controller - 25.5x25.5

The Aikon F7 AIO Board - F7 FC + 60A 3-6S BLHeli_S ESC&nbspis a new generation flight controller and ESC combination specifically designed for cinewhoops and other high-current applications. All the greatest features into one seamless flight experience!

The Aikon F7 AIO Board - F7 FC + 60A 3-6S BLHeli_S ESC is a new generation flight controller and ESC combination specifically designed for cinewhoops and other high-current applications. All the greatest features into one seamless flight experie

Aikon F7 AIO Board - F7 FC + 60A 3-6S BLHeli_S ESC

Happymodel

Happymodel DiamondF4 1S AIO Whoop Flight Controller - F4 FC, 5A ESC, 25-200mW VTX

The Happymodel Diamond F4 AIO 5-IN-1 Flight Controller has a built-in VTX, ESC, OSD, and receiver - all on one triangle-shaped whoop board!

Happymodel Diamond F4 ELRS 5-in-1 AIO Flight Controller - SPI ELRS 2.4GHz

Happymodel DiamondF4 AIO 5-IN-1 Flight controller built-in VTX ESC OSD Receiver with Frsky Receiver For Moblite 6/7 Check out all our Flight Controllers! Specification: Flight controller: (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI con

Happymodel DiamondF4 AIO 5-IN-1 Flight controller built-in VTX ESC OSD Receiver with Frsky Receiver For Moblite 6/7

Happymodel X12 5in1 AIO Flight Controller - F4 FC, 12A ESC, 400mW VTX, RX

HAPPYMODEL

The HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) AIO board featuring an F4 Flight Controller, onboard 12A 4-in-1 ESC, 5.8GHz OpenVTX and built-in receiver of your choice! Happymodel continues to impress with yet another fantastic AIO for whoop applications!
Browse the rest of our Whoop AIO boards and all our Happymodel products! 
Specifications

Input Voltage: 1-2S
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Gyro: MPU6000 or ICM20689 or BMI270
Max Continuous Current: 12A
VTX Output Power: 25-400mW
Antenna Connector: U.FL
OSD: Yes
Betaflight Target: ELRS Version: CRAZYBEEF4SX1280, PNP Version: CRAZYBEEF4DX
ESC Firmware: Z_H_30_REV16_7
Mounting Pattern: 25x25mm
Weight: 5.1g

ELRS Version

Packet Rate: 50Hz/150Hz/250Hz/500Hz
ELRS Firmware Version: V2.0
RF Frequency: 2.4GHz
Antenna: SMD antenna
Telemetry output Power: &lt12dBm

Includes

1x HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX)
1x Connecting Wires Set
1x Hardware Set
1x Antenna



Increase your range with the impressive HappyModel X12 2S AIO Whoop Flight Controller. Optimize your flight today!

HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) - Choose Version

HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) - For Sale

The Happymodel X12&nbspis a&nbsp5-in-1&nbspAIO board featuring an F4 Flight Controller, onbard 12A 4-in-1 ESC, 5.8GHz OpenVTX, and three different receiver options:&nbspPNP, FrSky, or ELRS. This AIO is great for brushless whoops with its great RX an VTX range!

The Happymodel X12 is a 5-in-1 AIO board featuring an F4 Flight Controller, onbard 12A 4-in-1 ESC, 5.8GHz OpenVTX, and three different receiver options: PNP, FrSky, or ELRS. This AIO is great for brushless whoops with its great RX

Happymodel X12 AIO 5-in-1 Board - F4 FC + 12A ESC

The HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) AIO board featuring an F4 Flight Controller, onboard 12A 4-in-1 ESC, 5.8GHz OpenVTX and built-in receiver of your choice! Happymodel continues to impress with yet another fantastic AIO for whoop applications!
Browse the rest of our Whoop AIO boards and all our Happymodel products! 
Specifications

Input Voltage: 1-2S
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Gyro: MPU6000 or ICM20689 or BMI270
Max Continuous Current: 12A
VTX Output Power: 25-400mW
Antenna Connector: U.FL
OSD: Yes
Betaflight Target: ELRS Version: CRAZYBEEF4SX1280, PNP Version: CRAZYBEEF4DX
ESC Firmware: Z_H_30_REV16_7
Mounting Pattern: 25x25mm
Weight: 5.1g

ELRS Version

Packet Rate: 50Hz/150Hz/250Hz/500Hz
ELRS Firmware Version: V2.0
RF Frequency: 2.4GHz
Antenna: SMD antenna
Telemetry output Power: &amplt12dBm

Includes

1x HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX)
1x Connecting Wires Set
1x Hardware Set
1x Antenna



The HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) AIO board featuring an F4 Flight Controller, onboard 12A 4-in-1 ESC, 5.8GHz OpenVTX and built-in receiver of your choice! Happymodel continues to impress with yet another fantastic AIO for whoop applications! Browse the rest of our 

HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) - Choose Version from WREKD Co.

BetaFPV

BetaFPV F4 1S 12A AIO Brushless Flight Controller - ELRS 2.4GHz

BETAFPV

&nbspIf you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this 12A&nbsp AIO FC V2&nbsp ELRS is definitely your best choice!

 If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this 12A  AIO FC V2  ELRS is definitely your best choice!

BetaFPV F4 1S 12A AIO Brushless Flight Controller - ELRS 2.4G V2.0

&nbspIf you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this 12A&nbsp AIO FC V1.0&nbsp ELRS is definitely your best choice!

 If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this 12A  AIO FC V1.0  ELRS is definitely your best choice!

BetaFPV F4 1S 12A AIO Brushless Flight Controller - ELRS 2.4G V1.0

F4 1S 12A AIO Brushless Flight Controller V2.2 is the default FC for Cetus X brushless whoop quadcopter, also great for 85mm whoop drones like Meteor85 and 3" toothpick drones like HX115 SE Toothpick Drone and HX115 LR Toothpick Drone. We updated the FC to V2.2 with BMI270 gyro and BB51 ESC hardware in place of ICM20689 gyro and BB21 ESC hardware.
Please click here to page F4 1S 12A AIO SPI ELRS V2.0 if you need information about it.
Tons of ExpressLRS items are available now!

Bullet Point


F4 1S 12A AIO Flight Controller is the best choice for building ultra-lightweight 3" toothpick drones like HX115 SE FPV Quad and 85mm whoop drones. Recommend Meteor85.
Most of the 1S flight controllers on the market come with 5A ESC by now, but this FC especially integrates 1S 12A ESC, providing more sufficient power for 3" toothpick drones or 85mm whoop drones.
Built-in current meter, 2 programmable RGB LEDs, and SPI ELRS or Frsky receiver. At the same time, all the pads are left for the external receivers with UART1 and UART2, for buzzers, etc.
Large pads are reserved for solder motor cables, this design will make solder easier.

Specification of FC

Item: F4 1S 12A AIO FC
Weight: 4.74 g (without power cable and BT2.0 connector)
CPU: STM32F411CEU6 (100MHZ )
Six-Axis: BMI270 (SPI connection)
Firmware version: betaflight_4.3.1_BETAFPVF4SX1280 (ELRS) /betaflight_4.2.11_BETAFPVF411RX (Frsky)

OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: SPI ELRS 2.4G Receiver/SPI Frsky
Motor Pin Connector: 1.25mm Header Pins
Mounting Hole Size: 26mm x 26mm (suitable for whoop pattern mounting hole)
USB Port: SH1.0 4-Pin

Specification of 1S 12A ESC

Built-in ESC with 12A continuous and peak 25A current
Input voltage: 1S-2S
ESC firmware: C_X_30_48_V0.18.1.hex for Bluejay BB51 hardware
Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM

The Bluejay firmware could support the BB51 hardware now. Both ELRS and Frsky boards are powered by BB51 hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator.

ESC-Configurator: https://preview.esc-configurator.com/

Download BLHeliSuite16714902A_Beta here.
Download the Bluejay ESC firmware. Please choose C_X_30.HEX.

Note: Only SPI ELRS 2.4G version supports motor direction set through Betaflight Configurator and SPI Frsky version does not support it. BLHeli Configurator and Bluejay Configurator are invalid for the BB51 ESC (both versions).
Diagram for F4 1S 12A AIO FC
Below is the diagram for SPI ELRS 2.4G board.


Below is the diagram for SPI Frsky board.


The current meter is integrated on the FC board. Here is the configuration in Betaflight Configurator.

12A 1S ESC
Should we really need a 12A ESC for 1S drones? If it is a 65mm or 75mm Whoop drone-like Meteor65, 5A ESC is enough for all actions. But how about with 3" propellers and 1102/1202.5 motors? Still, want smooth and powerful flying actions? The 5A ESC has developed about 3 years ago and was designed for whoop drones with 0603/0802 motors. For the past year, the BETAFPV team has been cooperating with BLHeli author Steffen on the 12A 1S ESC for 3" toothpick drones. Finally, it is here!
SPI ELRS 2.4G RX
This board integrates the receiver with the most popular radio link ExpressLRS since 2021. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. Know more about the ExpressLRS project on Github or join the discussion in the Facebook Group.

This board is designed for long-range 3inch ultralight toothpick drones or 2S whoop drones. If you want to try ExpressLRS on 65mm/75mm whoop drones, please build it with our F4 1S FC board with a built-in SPI ExpressLRS receiver.
F4 1S 12A AIO V2.2 integrates SPI ELRS 2.4G RX. The configuration is as follows.

How to Bind with Betaflight FC with SPI ExpressLRS Receiver.
How to Bind with Betaflight FC with External ExpressLRS Receiver.
More details and discussion on Github about SPI ELRS receiver.
SPI Frsky RX
Come with the built-in SPI Frsky Receiver (CC2500 chip), F4 1S 12A AIO FC can be compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. The default protocol is configured to Frsky D16 FCC out of the factory. Pilots could set up the protocol according to your own need in Betaflight Configurator.






Configuration


Protocol




FRSKY_D


Frsky D8



FRSKY_X


Frsky D16 FCC (ACCST 1.X version)




FRSKY_X_LBT


Frsky D16 LBT (ACCST 1.X version)




SFHSS


Futaba S-FHSS







How to Bind with Betaflight FC with SPI Frsky Receiver.
Betaflight Firmware and CLI
F4 1S 12A FC board comes with the default firmware betaflight_4.3.1_BETAFPVF4SX1280 (ELRS) or betaflight_4.2.11_BETAFPVF411RX (Frsky). The default firmware for SPI ELRS 2.4G RX version supports ELRS V2.0 RX.
Pay attention, For the SPI ELRS 2.4G version, ONLY the Betaflight firmware 4.3.0 and up start to support this BMI270 gyro. For the SPI Frsky version, DO NOT flash the other firmware. We have already built our own firmware betaflight_4.2.11_BETAFPVF411RX for SPI Frsky RX version to support BMI270 gyro. Please check the below link to download the firmware.
Download the firmware and CLI dump file for the F4 1S 12A FC board (ELRS and Frsky).
Bluejay ESC Firmware

F4 1S 12A flight controller with BB51 ESC hardware could flash the Bluejay ESC firmware now, which is based on BLHeli_S revision 16.7. With Bluejay ESC firmware, it supports bidirectional D-shot and RPM filtering in Betaflight, offers 24KHz, 48KHz, and 96KHz fixed PWM frequency for options, and custom start-up melodies. By using Bluejay ESC firmware on Cetus X and Meteor85 whoop drones with 1103 11000KV motors, the flight time is increasing effectively.

For pilots who want to flash Bluejay ESC firmware for F4 1S 12A FC, please use the BLHeliSuite16714902A_Beta or ESC-Configurator and download Bluejay ESC firmware C_X_30_.HEX from the below links.

ESC-Configurator: https://preview.esc-configurator.com/

Download BLHeliSuite16714902A_Beta here.
Download the Bluejay ESC firmware. Please choose C_X_30.HEX.


Note: Only SPI ELRS 2.4G version supports motor direction set through Betaflight Configurator and SPI Frsky version does not support it. BLHeli Configurator and Bluejay Configurator are invalid for the BB51 ESC (both versions).
Connecting External RX/HD Digital or Analog VTX
Both SPI ELRS 2.4G RX and SPI Frsky RX version support external HD digital VTX or Analog VTX. Please note that the board reserves an SBUS port and a UART port, which is available for the SBUS protocol receiver or other external receivers. You can refer to the below picture.

Recommend Parts
If you want to try the popular ExpressLRS receiver version for long-range performance, highly recommend you check the items for the ExpressLRS series.

Drones: Cetus X, 85mm whoop frame like Meteor85, Meteor85 HD, 3" toothpick drones
Battery: BT2.0 450mAh 1S 30C Battery, 450mAh 2S 45C Battery

Motor: 1102 18000KV motor, 1103 11000KV motor

Propeller: HQ3020 2-blade Props, 2020 4-blade Props


Package

1 * F4 1S 12A AIO FC
4 * Anti-vibration Rubber Dampers
4 * M2 x 10mm Screws
4 * M2 x 10mm Screws
4 * M2 Screw Nut
8 * PH-1.25 Connectors for Motor
1 * SH1.0 4-Pin Cable
1 * SH1.0 4-Pin to USB Type-C Adapter



F4 1S 12A AIO Brushless Flight Controller V2.2 is the default FC for Cetus X brushless whoop quadcopter, also great for 85mm whoop drones like Meteor85 and 3" toothpick drones like HX115 SE Toothpick Drone and HX115 LR Toothpick Drone. We updated the FC to V2.2 with BMI270 gyro and BB51 ESC hardware in place of ICM2068

F4 1S 12A AIO Brushless Flight Controller 2022

HAKRC

HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller - 40A 8Bit ESC, External USB Board

The F722 40A AIO is HakRC's new whoop style flight controller/ESC AIO board for ultralite and whoop build.This FC features an onboard as well as external USB port for thos tight build where it's hard to reach the USB plug.Checkout all our Whoop Style Flight Controllers and the rest of our HAKRC products! Features: The 

HAKRC F722 2-6S 40A AIO FLIGHT CONTROLLER BLHELI_S(W/external USB Board)

HAKRC bring us another serious contender in whoop sized AIO boards. With an F722 flight controller and 40 Amp ESC on board, this AIO is sure to keep even the most powerful quads flying well. This AIO also features both internal and external USB.
Check out our other AIO boards and maybe even some nice motors to finish off your build.
Features

The PCB adopts high-end 8-layer 2oZ thick copper skin, which has stronger over-current capability and good heat dissipation

MOS adopts imported 40V high current resistance MOS, long life and strong load capacity
Industrial grade LDO, high temperature resistance

High-quality Japanese Murata capacitors, strong filtering performance
Internal and External USB


Specifications
Flight Controller

Input Voltage: 2S-6S
MCU: STM32F722RET6
IMU: MPU6000
OSD: AT7456E
UARTs: 5
Flight control firmware version: HAKRC F722D
BEC: 5V/3A
Sensor: Built-in current sensor
Barometer: integrated
LED: Support WS2812 and other programmable
Compatible receivers: CRSF / Frsky/ Futaba/ Flysky/TBS Crossfire/ DSMX: DSM2 receiver
Dimensions: 32x32mm (25.5mm-26.5mm mounting hole)

ESC

Input voltage: 2S-6S
Continuous current: 40A
Peak current: 50A
Firmware version: BLHELI _S (G- H-30)
Current meter proportional value: 450

Protocol support: PWM, Oneshot125, Oneshot42,Multishot, Dshot150, Dshot300, Dshot600



Includes


1x HAKRC F722 AIO Whoop/Toothpick Flight Controller w/ 2-6S 8Bit 40A ESC
1x XT30 power cord
1x Type-C USB small board
1x SH1.0/7P single-head cable
1x 270uf/35V capacitor
4x Yellow shock-absorbing balls


Wiring Diagram


HAKRC bring us another serious contender in whoop sized AIO boards. With an F722 flight controller and 40 Amp ESC on board, this AIO is sure to keep even the most powerful quads flying well. This AIO also features both internal and external USB. Check out our other AIO boards and maybe even some nice motors to finish o

HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC & External USB Board

HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC 

HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC & External USB Board from WREKD Co.

This&nbspHAKRC AIO Board&nbspfeatures a brushless F722 flight controller and a 40A 2-6S BLHeli_S ESC. This version carries an external USB. This is an ultra-light 7g brushless AIO flight controller!!&nbspThis FC has a strong performance and can handle 40A continuous current and up to 6S.&nbsp

This HAKRC AIO Board features a brushless F722 flight controller and a 40A 2-6S BLHeli_S ESC. This version carries an external USB. This is an ultra-light 7g brushless AIO flight controller!! This FC has a strong performance and can ha

HAKRC AIO Board - Brushless F722 FC + 40A 2-6S BLHeli_S ESC w/ External USB

JHEMCU

JHEMCU GSF405A 1S-2S AIO F4 Flight Controller - 5A ESC, ELRS 2.4GHz Rx

WREKD General

JHEMCU GSF405A-BMI is a 1-2S F4 AIO that includes a 4in1 brushless ESC and ELRS 2.4G receiver. It possesses 5 UARTs (1-4, 6), an I2C port, and is SBUS compatible (RX2 port). Additionally, a built-in ELRS receiver is available on UART1 and WS2812 LED light is preinstalled on the board. Moreover, an 8MB black box, barometer, buzzer, and 5V supply camera interface are featured along with a reserved camera interface.

Specifications

CPU: STM32F405
Gyroscope/Accelerometer: BMI270
OSD: AT7456E
Barometer: BMP280
Black box: 8MB
IIC: support
BEC: 5V
UART: UART1 (ELRS), UART2 (external RC), UART3, UART4, UART6
USB: micro usb
Size: 25.5x25.5mm M2
Receiver: ELRS(CRSF), TBS(CRSF), SBUS, IBUS, DSM2, DSMX
Support programmable LEDs such as WS2812
Support buzzer
Built-in voltage, current sensor
Firmware: Betaflight_ 4.3.0_STM32F405.HEX (JHEF405PRO)
Weight: 3.3g

Receiver Specifications

Protocol: ELRS (ExpressLRS)
Frequency: 2.4GHZ
Working Agreement: CRSF(Betaflight)
Firmware: JHEMCU_EP24S_2400_RX-2.2.0.bin

ESC Specifications

Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 1S-2S Lipo
Continuous current: 5A
Firmware: BLHELI_S S_H_50_REV16_7.HEX

Includes

1 x GSF405A-BMI board
1 x 2.4G Antenna
1 x 2.0MM plug wire
1 x 470UF/10V capacitor
4 x M2*6.5MM shock-absorbing ball
1 x 2S series board


JHEMCU GSF405A-BMI is a 1-2S F4 AIO that includes a 4in1 brushless ESC and ELRS 2.4G receiver. It possesses 5 UARTs (1-4, 6), an I2C port, and is SBUS compatible (RX2 port). Additionally, a built-in ELRS receiver is available on UART1 and WS2812 LED light is preinstalled on the board. Moreover, an 8MB black box, barome

JHEMCU GSF405A 1S-2S AIO F4 Flight Control W/ 5A ESC & ELRS 2.4G RX - 25.5×25.5mm from WREKD Co.

JHEMCU GSF405A 1S-2S AIO F4 Flight Control W/ 5A ESC & ELRS 2.4G RX - 25.5×25.5mm

JHEMCU GSF405A is a 1-2S F4 AIO, which also integrates four-in-one brushless ESC and ELRS 2.4G receiver.It has 5 serial ports (UART1, UART2, UART3, UART4, UART6), one I2C port, and one SBUS interface. (The serialport used by SBUS is RX2), the built-in ELRS receiver is UART1 port, onboard a WS2812 LED light, and theWS28

FPVELITE

JHEMCU has done it again with this impressive 1-2S AIO featuring an ExpressLRS built-in RX!
Browse the rest of our Whoop AIO boards and the rest of our JHEMCU selection!
Specifications

Input Voltage: 1-2S
CPU: STM32F405
Gyro: MPU6000
OSD: AT7456E
Barometer: BMP280
Black box: 8MB
IIC: Support
BEC: 5V
UART: UART1 (ELRS), UART2 (external RC), UART3, UART4, UART6
Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DSMX
Buzzer: Yes
Current Sensor: Yes

Protocol: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Continuous current: 5A
Firmware: BLHELI_S S_H_50_REV16_7.HEX
Mounting Pattern: 25x25 M2
Weight: 3.3 grams

Express LRS Receiver

Frequency: 2.4GHZ
Protocol: CRSF 
Firmware: DIY_2400_RX_ESP8285_SX1280

Includes

JHEMCU GSF405A 1-2S Toothpick/Whoop AIO Flight Controller w/ 8bit 5A ESC and ELRS 2.4GHz RX


JHEMCU has done it again with this impressive 1-2S AIO featuring an ExpressLRS built-in RX! Browse the rest of our Whoop AIO boards and the rest of our JHEMCU selection! Specifications Input Voltage: 1-2S CPU: STM32F405 Gyro: MPU6000 OSD: AT7456E Barometer: BMP280 Black box: 8MB IIC: Support BEC: 5V UART: UART1 (ELRS),

JHEMCU GSF405A 1-2S Toothpick/Whoop AIO Flight Controller w/ 8bit 5A ESC and ELRS 2.4GHz RX

JHEMCU GSF405A 1-2S Toothpick/Whoop AIO Flight Controller w/ 8bit 5A E

The&nbspJHEMCU GS405A AIO&nbspfeatures an F4 FC and a 5A ESC with built-in ELRS 2.4GHz receiver. This is an ultra-light 3.3g brushless AIO flight controller with 25.5x25.5mm mounting pattern!!&nbspThis FC can handle 5A of continuous current and up to 2S.

The JHEMCU GS405A AIO features an F4 FC and a 5A ESC with built-in ELRS 2.4GHz receiver. This is an ultra-light 3.3g brushless AIO flight controller with 25.5x25.5mm mounting pattern!! This FC can handle 5A of continuous current and up

JHEMCU AIO Board - GSF405A F4 FC + 5A 1-2S ESC w/ Built-in ELRS 2.4GHz Receiver

JHEMCU GSF405A 1-2S Toothpick/Whoop AIO Flight Controller w/ 8bit 5A ESC and ELRS 2.4GHz RX from WREKD Co.

FETtec

FETtec Mini AIO Flight Controller - F3 FC, 15A ESC


Features:

Full FETtec AIO with KISS FC Firmware
4 ESCs 15A
2-4s
Graphical OSD with full KISS tuning

 FC:

STM32F303CCT6 @ 72MHz
MPU6000
Supply voltage 6-18V (2-4s LiPo)
1x 5V BEC (max 1A)
Dshot 600

 ESC:

Active current limiting @ 15A
Input voltage: 2s-4s
High quality 30V MOSFETs
STM32G071 @ 64MHz
128 kHz Motor PWM
Automatic input signal detection

Dshot
PWM
OneShot42/125


 
Dimensions:
 
SIze: 29 x 29 mm
Mounting: 25,5 x 25,5 mm
Weight: 3,41 g
 
Software:
 
KISS Firmware - Softwareupdate via FETtec Configurator
FETtec ESCs Firmware - Softwareupdate via FETtec Configurator
FETtec OSD - Softwareupdate via FETtec Configurator
 
Scope of delivery:
 
 1x FETtec Mini AIO 15A
1x Capacitor 35V 330µF
 
Related links to "FETtec Mini AIO 15A"

 FETtec Mini AIO 15A manual


Features: Full FETtec AIO with KISS FC Firmware 4 ESCs 15A 2-4s Graphical OSD with full KISS tuning  FC: STM32F303CCT6 @ 72MHz MPU6000 Supply voltage 6-18V (2-4s LiPo) 1x 5V BEC (max 1A) Dshot 600  ESC: Active current limiting @ 15A Input voltage: 2s-4s High quality 30V MOSFETs STM32G071 @ 64MHz 128 kHz Motor PWM Autom

FETtec Mini AIO 15A

Holybro

The Holybro FETtec 15A Mini 2S-4S AIO comes with a KISS FC Firmware, 4 ESCs, 15 amps, and a graphical OSD with full KISS tuning!

Holybro FETtec Mini AIO - F3 FC + 15A 2S-4S ESC w/ OSD

GEPRC

GEPRC F722 AIO Flight Controller - F722 FC, 35A 2S-6S ESC

The GEPRC F722 AIO is equipped with an F722 FC and 35A 2S-6S BLS ESC. This AIO stack adopts MCU STM32F722, which gives a powerful performance and higher computing speed. It features 5 full UART ports and can connect more external devices. GEPRC designed a 6-pin connector for the DJI Air Unit, just plug and play.
The BLheili_S 35A ESC can handle 35A continuous current (40A burst), supports 2-6S lipo batteries, and brings the drone a stronger flight performance. Support OSD parameter adjustment, buzzer, led, and other functions. It is 8.8g, ultra-lightweight, and 25.5x25.5mm mounting hole, suitable for most of the frames on the market!
Check out all our whoop flight controllers, and our GEPRC products!
Features

MCU: STM32F722, with strong performance and higher computing speed.
It has 5 full UART ports, which connect more external devices
6-pin connector for DJI Air Unit module, and just plug and play.
The BLheili_S 35A ESC can handle 35A continuous current (40A burst).
Support OSD parameter adjustment, buzzer, led, and other functions.
8.8g ultra-lightweight
25.5x25.5mm mounting hole, suitable for most frames

Specifications
GEPRC F722 AIO

Model Name: GEP-F722-35A AIO
MCU: STM32F722
IMU: BMI270/42688
Firmware target: GEPRC_F722_AIO
OSD: Betaflight OSD w/ AT7456Ev
UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
Beeper: YES
LED: YES
USB: Micro USB
BEC output: 5V@1A
Integrated LC Filter
ESC MCU: 8BB21F16G
Continuous current: 35A
MAX current: 40A (10s)
Input: 2-6S
Supports: Dshot600, Oneshot, Multishot
BlackBox: 16Mb
Target: G_H_30
Size: 32x32mm Board
Installing Hole: 25.5x25.5mm, M2
Weight: 8.8g


Includes

1x GEP-F7-35A AIO
1x XT30-7CM-18AWG Power cables
1x 35V220UF capacitance
1x SH1.0-6Pin to GH1.25-8Pin cables
8x M2*6.5mm Damping ring


The GEPRC F722 AIO is equipped with an F722 FC and 35A 2S-6S BLS ESC. This AIO stack adopts MCU STM32F722, which gives a powerful performance and higher computing speed. It features 5 full UART ports and can connect more external devices. GEPRC designed a 6-pin connector for the DJI Air Unit, just plug and play. The BL

GEPRC F722 2-6S F7 AIO FC w/ 35A 8Bit 4in1 ESC from WREKD Co.

GEPRC F722 2-6S F7 AIO FC w/ 35A 8Bit 4in1 ESC

The GEPRC F722 AIO is equipped with an F722 FC and 35A 2S-6S BLS ESC. This AIO stack adopts MCU STM32F722, which gives a powerful performance and higher computing speed.

GEPRC F722 AIO - F722 FC+ 35A 2S-6S BLS ESC

Model Name：GEP-F722-35A AIO
 	MCU:STM32F722
 	IMU:BMI270/42688 gyro/accelerometer(SPI)
 	OSD:Betaflight OSD w/ AT7456Ev
 	BEC output：5V@1A
 	Intergrated LC Filter
 	ESC MCU：BB21F16G
 	Continuous current：35A
 	Input：2~6S
 	Supports：Dshot600,Oneshot,Multishot
 	Size：32x32mm Board
 	Mounting Hole：25.5x25.5mm
 	Weight：8.8g

Model Name：GEP-F722-35A AIO  MCU:STM32F722  IMU:BMI270/42688 gyro/accelerometer(SPI)  OSD:Betaflight OSD w/ AT7456Ev  BEC output：5V@1A  Intergrated LC Filter  ESC MCU：BB21F16G  Continuous current：35A  Input：2~6S  Supports：Dshot600,Oneshot,Multishot  Size：32x32mm Board  Mounting Hole：25.5x25.5mm  Weight：8.8g

GEP-F722-35A AIO (F722 FC 35A 2-6S 8bits BLS ESC 25.5mm) - GEPRC

GEP-F722-35A AIO (F722 FC 35A 2-6S  8bits BLS ESC 25.5mm)

GEPRC F411 35A Toothpick AIO Flight Controller - F411 FC, 35A 2S-6S ESC


GEP-F4-35A is developed on the basis of GEP-F4-20A. It can handle 35A continuous current and (40A burst) and totally supports the 2-6S lipo battery. It can be used with 1204/1404/1507/1805/2004 motors and 2-5 inch propellers. It supports OSD parameter adjustments. And It’s only 8.8g ultra-lightweight. With 25.5mm x 25.5mm mounting holes, this AIO is suitable for most of the frames on the market.
Check out all our whoop flight controllers, and our GEPRC products!

Features

BLheli_ S 35A ESC, supports 2-6S LIPO battery input, it can handle 35A continuous current (40A burst), with a current meter.
Mainstream STM32F411 FC runs stably.

BMI270 gyroscope with 8K sampling frequency.

External Buzzer: Support
LED Control: Support
The overall weight is about 8.8g



Specifications

Model Name: GEP-F411-35A AIO
MCU: STM32F411
IMU: BMI270 gyro/accelerometer (SPI)
FC Firmware target: GEPRC_F411_AIO
OSD: BetaFlight OSD w/ AT7456E chip
Baro: NO
Current Monitoring: Yes
Betaflight OSD: Yes
External Buzzer: Yes supported
LED: Yes Supported
USB Port: MicroUSB
BEC Output: 5V@1A
Integrated LC Filter
ESC MCU: 8BB21F16G
Continuous current: 35A
Peak current: 40A(10s)
Input: 2-6S lipo
Supports Dshot300/600, Oneshot, Multishot
Current meter: 210
Target: G_H_30 BLS
Size: 32x32mm board,25.5mm mounting holes (M2)
Installing Hole: 25.5×25.5mm, M2

Manual PDF
Includes

1 x GEP-F4-35A-AIO
1 x XT30-7CM-18AWG cables
1 x 35V220UF capacitance
8 x M2*6.5mm Damping rings




GEP-F4-35A is developed on the basis of GEP-F4-20A. It can handle 35A continuous current and (40A burst) and totally supports the 2-6S lipo battery. It can be used with 1204/1404/1507/1805/2004 motors and 2-5 inch propellers. It supports OSD parameter adjustments. And It’s only 8.8g ultra-lightweight. With 25.5mm x 25.

GEPRC F411 2-6S AIO Toothpick / Whoop Flight Controller w/ 35A 4in1 ESC

GEPRC F411 2-6S AIO Toothpick / Whoop Flight Controller w/ 35A 4in1 ES

The&nbspGEPRC F411 35A Toothpick AIO can&nbsphandle 35A continuous current and (40A burst), supports 2-6S lipo batteries, and can be used with 1204/1404/1507/1805/2004 motors and 2-5 inch propellers!&nbsp

The GEPRC F411 35A Toothpick AIO can handle 35A continuous current and (40A burst), supports 2-6S lipo batteries, and can be used with 1204/1404/1507/1805/2004 motors and 2-5 inch propellers! 

GEPRC F411 35A Toothpick AIO - F411 FC + 35A 2S-6S BLS ESC

GEPRC F411 2-6S AIO Toothpick / Whoop Flight Controller w/ 35A 4in1 ESC from WREKD Co.

Model: GEP-F4-35A
 	MCU: STM32F411
 	IMU: BMI270/accelerometer(SPI)
 	OSD: Betaflight OSD w/ AT7456Ev
 	ESC MCU: BB21F16G
 	Continue Current: 35A
 	Input Voltage: 2~6S (LIPO Battery)
 	ESC Protocol: Dshot300/600,Oneshot,Multishot
 	Size: 32x32mm Board
 	Mount Holes: 25.5x25.5mm
 	Weight: 8.8g

Model: GEP-F4-35A  MCU: STM32F411  IMU: BMI270/accelerometer(SPI)  OSD: Betaflight OSD w/ AT7456Ev  ESC MCU: BB21F16G  Continue Current: 35A  Input Voltage: 2~6S (LIPO Battery)  ESC Protocol: Dshot300/600,Oneshot,Multishot  Size: 32x32mm Board  Mount Holes: 25.5x25.5mm  Weight: 8.8g

GEP-F411-35A AIO (F411 FC 35A 2-6S 8bits BLS ESC 25.5mm) - GEPRC

GEP-F411-35A AIO (F411 FC 35A 2-6S  8bits BLS ESC 25.5mm)

I am glad to introduce a new member of GEP FC AIO, GEP-F4-35A,it is released now. GEP-F4-35A is developed on the basis of GEP-F4-20A. It can handle 35A continuous current and (40A burst), totally supports the 2-6S lipo battery.It can be used with 1204/1404/1507/1805/2004 motors and 2-5 inch propellers. Support OSD para

GEPRC GEP-F411-35A AIO F411 FC 35A 2-6S 8bit BLHeli_S ESC - 25.5x25.5mm

EMAX Babyhawk II HD Part B - AIO Flight Controller ESC Board

This Emax AIO Flight Controller + ESC is a replacement part for the&nbspEMAX BabyHawk II HD Freestyle RTF.

This Emax AIO Flight Controller + ESC is a replacement part for the EMAX BabyHawk II HD Freestyle RTF.

EMAX BabyHawk II HD BLHeli_S F4 2-4S 25A  AIO FC + ESC

This Emax AIO Flight Controller + ESC is a replacement part for the EMAX BabyHawk II HD Freestyle! Check out all our Whoop Style AIO Flight Controllers and the rest of our Emax Babyhawk II Collection! Specifications: Brand Name: Emax Input Voltage: 2-4S Lipo Firmware:STM32F411 Firmware Gyroscope: MPU6000 Onboard: 25A B

EMAX BabyHawk II HD BLHeli_S F4 2-4S 25A Whoop Style AIO

Happymodel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula 6

Replacement flight controller for the popular Happymodel Mobula 6 or any 1S build Checkout our Mobula 6 parts and our full collection of Happymodel Products! Specifications Flight Controller (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEE F4 Lite Flys

HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula 6 - Frsky

The Happymodel CrazyBee F4 Lite Flight Controller brings lots of power in a small package. This 4-in-1 FC comes with an integrated receiver (FrSky), ESC, and an onboard 5.8GHz VTX!

Happymodel Crazybee F4 Lite 1S Whoop Flight Controller - Frsky

The Happymodel CrazyBee F4 Lite Flight Controller brings lots of power in a small package. This 4-in-1 FC comes with an integrated receiver (Flysky), ESC, and an onboard 5.8GHz VTX!

Happymodel Crazybee F4 Lite 1S Whoop Flight Controller - Flysky

HAKRC F4126 20A Whoop AIO Flight Controller

The F4126 is HakRC's new whoop style flight controller/ESC AIO board for ultralight and whoop build. This FC features a Barometer which is rare to see in this type of flight controller and can handle up to 4S power.Checkout all our Whoop Style Flight Controllers and the rest of our HAKRC products! Features: 1.PCB adopt

HAKRC  F4126 BLHELI_S 20A WHOOP AIO FC

The F4126 is HakRC's new whoop style flight controller/ESC AIO board for ultralight and whoop build. This FC features a Barometer which is rare to see in this type of flight controller and can handle up to 5S power.
Check out the rest of our 20x20 ESCs, as well as HAKRC products!
Features

The PCB uses high-end 8 layers of 2oZ thick copper, which has stronger over current capability and good heat dissipation.
MOS adopts imported 30V high current resistance MOS, long life and strong load capacity.
Using industrial grade LDO, high temperature resistance.
Using high-quality Japanese Murata capacitors, strong filtering performance





Specifications

Brand: HAKRC
Item Name: HAKRC F411 20A AIO
Mounting Hole: 25.5x25.5mm/26.5x26.5mm
Weight: 8.5g
Package weight: 50g
Size: 31x31mm

Flight Controller:

CPU: STM32F411CEU6
IMU: ICM42688
OSD: AT7456E
Barometer: SPL06
LED: Supports programmable such as WS2812
Current meter: Yes
Firmware: HAKRC F411D
Support receiver: Frsky/ Futabas/ Flysky/ TBS Crossfire/ DSMX:DSM2

ESC:

Firmware: BLHELI_ S (G- H-20)
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150，Dshot300，Dshot600
Input: 2S-5S Lipo
Con. Current: 20A
Peak Current: 25A

Includes

1xHakRC F411 2-5S (F4126) AIO FC w/ 20A 8Bit 4in1 ESC
4x M2 Shock absorber
1x XT30 power cord
1x Small bandage
1x Type-C USB
1x USB cable
1x 270uf/35V capacitor
1x DJI FPV Cable
1x DJI O3 Air Unit 3-in-1 Cable
1x Instructions

Wiring


The F4126 is HakRC's new whoop style flight controller/ESC AIO board for ultralight and whoop build. This FC features a Barometer which is rare to see in this type of flight controller and can handle up to 5S power. Check out the rest of our 20x20 ESCs, as well as HAKRC products! Features The PCB uses high-end 8 layers

HakRC F4126 F411 2-5S AIO Whoop/Toothpick Flight Controller (w/ 20A 8Bit 4in1 ESC)

HakRC F4126 F411 2-5S AIO Whoop/Toothpick Flight Controller (w/ 20A 8B

BetaFPV F411 V5 20A Toothpick AIO Flight Controller - F4 FC, 20A ESC

As a continuance of the F411 chip, the V5 FC board is upgraded from the F4 20A V3 FC board. F411 4S 20A Toothpick Brushless Flight Controller V5 adopts BMI270 gyro instead of MPU6000 on V3 board. With two integrated plug &amp play ports for receiver and HD digital VTX, it is easy to install and requires less solder work. Besides, the board is a solid value for durable use thanks to the high-quality PCB material and enhanced production process.
Check out all our whoop flight controllers, and all our BetaFPV gear!
Features

With a large pad to solder, it is easy to solder external electronics. In addition, the V5 board features plug&ampplay ports for the receiver and HD digital VTX, which requires less solder work for convenient installation.
High-quality MOSFETs are applied to F411 4S 20A FC V5 to handle 20A continuous current and reach 25A peak current.
The motor solder pads are reinforced by thick copper and edge plating technology, allowing lower resistance for more current on motors.
F411 4S 20A FC V5 reserves the UART ports layout, UART1 for RX, UART2 for DJI OSD or Analog VTX, and UART6 for spare usage, more convenient for pilots to solder.
Come with a 25.5x25.5mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter frame like Pavo25 and X-knight 35


The board integrates 3 LEDs, including the Power LED (Red), FC LED(Blue) and Receiver LED.

Connecting External RX/HD Digital VTXF411 4S 20A FC V5 integrates the Plug &amp Play port for the external RX and HD digital VTX, and there will be a 4-pin connector for RX and a 6-pin connector for HD digital VTX in the package. Thus, we highly recommend pilots use the port to save the solder work.
.



 
FC &amp ESC FirmwareThe default firmware is including CLI dump file. But if you flash firmware from the Betaflight configurator official site, please flash a CLI dump file for F411 4S 20A FC V5. We offer the default firmware and CLI dump file to download.

Download the FC default firmware betaflight_4.3.x_BETAFPVF411 and CLI dump file.

BMI270 gyro will need more software filters and is sensitive in high frequency. This can be solved by adjusting filter settings in PID tuning. The Betaflight official or BETAFPV default FC firmware and CLI dump file do not include the filter settings. For pilots who want to configure it, we recommend setting gyro lowpass 2 at 145Hz and choosing filter type at PT2.

F411 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLHeliI_S firmware. The main difference is that the BLUEJAY firmware supports bidirectional D-shot, while BLHeli_S does not support it. Here are the download links for two firmware.When using BLHeli_S ESC firmware, please configure the settings on BLHeli - Configurator software.

Download the BLHeli_S ESC firmware
Download the BLHeliSuite16714902a 
Download the BLHeli - Configurator
Download the ESC - Configurator

We offer the BLUEJAY ESC firmware for pilots. When using BLUEJAY ESC firmware, please configure the ESC on ESC-Configurator software.

Download the BLUEJAY ESC firmware
Download the ESC - Configurator
Download the Bluejay Configurator

Recommend Parts

Motors: 1404 Brushless Motors, 1506 Brushless Motors
Battery: 2S 600mAh, 3S/4S 850mAh, 4S 750mAh, or 4S 1000mAh
Frame: Pavo25 Frame, X-knight 35, or other frames with whoop mounting pattern

Specifications
Flight Controller:

CPU: STM32F411CEU6 (100MHZ)
Six-Axis: BMI270 (SPI connection)
Mounting Size: 25.5x25.5mm (M2 Anti-vibration rubber damper available)
FC Firmware: betaflight_4.3.x_BETAFPVF411
OSD: Built-in Betaflight OSD (OSD chip: AT7456E)
Receiver: SBUS/CRSF/DSMX Receiver
BEC: 5V 3A
Built-in current sensor
Weight: 8.15g

ESC:

ESC Chip: SILABS EFM8BB21F16G-C
Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Input voltage: 2S-4S Lipo
Continuous current: 20A
Peak current: 25A
Firmware: G_H_20_REV16_7.HEX (Default BLHeli_S), BLUEJAY (Optional)


Note: F411 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLHeliI_S firmware. The main difference is that the BLUEJAY firmware supports bidirectional D-shot, while BLHeli_S does not support it.
Includes

1x BetaFPV F411 2-4S 20A Whoop/Toothpick Flight Controller V5 8bit 4in1 ESC BLHeli_S - BMI270
1x Cable Pigtail (XT30)
1x 6-Pin Connector for Digital VTX
1x 4-Pin Connector for RX
4x M2x12 Screws
8x M2 Nuts 
4x M2 Anti-vibration rubber dampers

Diagram



As a continuance of the F411 chip, the V5 FC board is upgraded from the F4 20A V3 FC board. F411 4S 20A Toothpick Brushless Flight Controller V5 adopts BMI270 gyro instead of MPU6000 on V3 board. With two integrated plug &amp; play ports for receiver and HD digital VTX, it is easy to install and requires less solder wo

BetaFPV F411 V5 2-4S AIO Whoop/Toothpick Flight Controller (w/ 20A 8Bit 4in1 ESC) - BMI270

BetaFPV F411 V5 2-4S AIO Whoop/Toothpick Flight Controller (w/ 20A 8Bi

As a continuance of the F411 chip, the V5 FC board is upgraded from the F4 20A V3 FC board. F411 4S 20A Toothpick Brushless Flight Controller V5 adopts BMI270 gyro instead of MPU6000 on V3 board. With two integrated plug&ampplay ports for receiver and HD digital VTX, it is easy to install and requires less solder work. Besides, the board is a solid value for durable use thanks to the high-quality PCB material and enhanced production process.

Bullet Point

With a large pad to solder, it is easy to solder external electronics. In addition, the V5 board features plug&ampplay ports for the receiver and HD digital VTX, which requires less solder work for convenient installation.
High-quality MOSFETs are applied to F411 4S 20A FC V5 to handle 20A continuous current and reach 25A peak current.
The motor solder pads are reinforced by thick copper and edge plating technology, allowing lower resistance for more current on motors.

F411 4S 20A FC V5 reserves the UART ports layout, UART1 for RX, UART2 for DJI OSD or Analog VTX, and UART6 for spare usage, more convenient for pilots to solder.
Come with a 25.5*25.5mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter frame like Pavo25 and X-knight 35.

Specification
Flight Controller










CPU: STM32F411CEU6 (100MHZ)
Six-Axis: BMI270 (SPI connection)
Mounting Size: 25.5*25.5mm (M2 Anti-vibration rubber damper available)
FC Firmware: betaflight_4.3.x_BETAFPVF411
OSD: Built-in Betaflight OSD (OSD chip: AT7456E)
Receiver: SBUS/CRSF/DSMX Receiver
BEC: 5V 3A
Built-in current sensor
Weight: 8.15g

ESC

ESC Chip: SILABS EFM8BB21F16G-C
Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Input voltage: 2S-4S Lipo
Continuous current: 20A
Peak current: 25A
Firmware: G_H_20_REV16_7.HEX (Default BLHeli_S), BLUEJAY (Optional)


Note: F411 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLHeliI_S firmware. The main difference is that the BLUEJAY firmware supports bidirectional D-shot, while BLHeli_S does not support it. 
Comparison to F411 4S 20A V3 FC
We upgraded the F411 4S 20A V3 board to V5 by adopting BMI270 gyro instead of MPU6000 and adding some new features. BMI270 gyro works great in most cases, especially in low frequency. Unlike the V3 board that supports JST1.25 connectors, the motor solder pads on V5 board are solderable only and reinforced by thick copper and edge plating technology, allowing lower resistance for more current on motors. Besides, the V5 FC board features high-quality material for the stability of the solder and durability of use. The below pictures show the difference between the two flight controllers.

Diagram for Toothpick F411 4S 20A Brushless FC V5
The board integrates 3 LEDs, including the Power LED (Red), FC LED(Blue) and Receiver LED.




LED
Status
Description


Power LED (Red)
Solid
Power on


FC LED (Blue)
Flashing
Motor Disarmed



FC LED (Blue)
Solid
Motor Armed



Receiver LED (Orange)
Solid
Connected Successfully



Connecting External RX/HD Digital VTX
F411 4S 20A FC V5 integrates the Plug &amp Play port for the external RX and HD digital VTX, and there will be a 4-pin connector for RX and a 6-pin connector for HD digital VTX in the package. Thus, we highly recommend pilots use the port to save the solder work.



FC &amp ESC Firmware
The default firmware is including CLI dump file. But if you flash firmware from the Betaflight configurator official site, please flash a CLI dump file for F411 4S 20A FC V5. We offer the default firmware and CLI dump file to download.

Download the FC default firmware betaflight_4.3.x_BETAFPVF411 and CLI dump file.

BMI270 gyro will need more software filters and is sensitive in high frequency. This can be solved by adjusting filter settings in PID tuning. The Betaflight official or BETAFPV default FC firmware and CLI dump file do not include the filter settings. For pilots who want to configure it, we recommend setting gyro lowpass 2 at 145Hz and choosing filter type at PT2.


F411 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLHeliI_S firmware. The main difference is that the BLUEJAY firmware supports bidirectional D-shot, while BLHeli_S does not support it. Here are the download links for two firmware.
When using BLHeli_S ESC firmware, please configure the settings on BLHeli - Configurator software.

Download the BLHeli_S ESC firmware.

Download the BLHeliSuite16714902a. 
Download the BLHeli - Configurator.
Download the ESC - Configurator.

We offer the BLUEJAY ESC firmware for pilots. When using BLUEJAY ESC firmware, please configure the ESC on ESC-Configurator software.

Download the BLUEJAY ESC firmware.
Download the ESC - Configurator.

Download the Bluejay Configurator.

Recommend Parts


Motors: 1404 Brushless Motors, 1506 Brushless Motors

Battery: 2S 600mAh, 3S/4S 850mAh, 4S 750mAh, or 4S 1000mAh

Frame: Pavo25 Frame, X-knight 35, or other frames with whoop mounting pattern.


Package


1 * F411 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (BMI270)
1 * Cable Pigtail (XT30)
1 * 6-Pin Connector for Digital VTX

1 * 4-Pin Connector for RX

4 * M2x12 Screws
8 * M2 Nuts 
4 * M2 Anti-vibration rubber dampers



As a continuance of the F411 chip, the V5 FC board is upgraded from the F4 20A V3 FC board. F411 4S 20A Toothpick Brushless Flight Controller V5 adopts BMI270 gyro instead of MPU6000 on V3 board. With two integrated plug&amp;play ports for receiver and HD digital VTX, it is easy to install and requires less solder work

F411 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (BMI270)

iFlight

iFlight Blitz Whoop F7 2-6S AIO Fight Controller - 55A 8Bit 4in1 ESC

IFLIGHT

This is our new iFlight BLITZ series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let's go! 
 Check out our other AIO FCs, as well as the rest of our iFlight selection!
Features

Separated Flight Control board to minimize electrical gyro noise
Pass-through DJI O3 and Caddx Vista/Polar Connector
FC PCB can be disassembled from the ESC PCB Repair allowed!
MCU: BGA-STM32F745, 216MHz
OSD: AT7456E
Blackbox: 16MB Onboard Flash
Gyro: BMI270

Specifications

FC Specifications


MCU: BGA-STM32F745
Gyro: BMI270
Blackbox: 16MB Onboard Flash
BEC output: 5V 2.5A 
WS2812 LED Strip: Yes
Buzzer: Yes
Barometer: DPS310
Connector: Micro-USB
OSD: IFLIGHT OSD (AT745E）
FC Firmware：IFLIGHT_BLITZ_F7_AIO
Mounting pattern: 25.5 x 25.5mm φ3mm
Dimensions: 35mm x 35mm
Weight: 10.5g 
BEC: 5V 2A / 3A
Input voltage: 2-6S, support LIHV battery
Smartaudio / IRC Tramp VTX protocol supported




ESC Specifications


ESC MCU: BB21
Driver: FD6288
Input voltage: 2-6S Support LIHV battery
Output current: 55A, peak value 65A (10 seconds)
ESC firmware: Q-H-40 - Bluejay, 0.16, 24kHz
Current sensor: ratio 200 (1/10mV/A)
BEC: NO
ESC Telemetry: NO
Bidirectional DShot: Yes(need to use Bluejay firmware)
Supports DShot DShot150/300/600/MultiShot/ OneShot etc.



Includes

iFlight Blitz Whoop F7 AIO V1.1 (w/ 55A 8Bit 4in1 ESC)
2 x Capacitor 470uF/35V
1 x XT30U Male 18AWG cable 70mm
1 x 1.0-7P cable 50mm-28mm
1 x 1.0-7P cable 50mm
4 x M2 silicon grommets
8 x M2x12mm screws
8 x M2 Transparent Nylon Nut
10 x 0.8mm black Heat shrink tube 10mm


Wiring Diagram


This is our new iFlight BLITZ series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordin