FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Flywoo

Flywoo Firefly Nano Baby FR 40mm 1.6" Frame Kit

This&nbspFrame Kit&nbspis for the&nbspFlywoo Firefly Nano Baby FR Micro Quadcopter which is a freestyle variation of the original.&nbsp

This Frame Kit is for the Flywoo Firefly Nano Baby FR Micro Quadcopter which is a freestyle variation of the original. 

Flywoo Firefly Nano Baby FR 40mm 1.6" 1S Micro Quadcopter - Frame Kit

Flywoo Firefly Nano Baby FR 40mm 1.6&quot 1S Micro Quadcopter - Frame Kit

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

EMAX

EMAX TinyHawk III Frame Kit

This&nbspframe kit&nbspis for the&nbspEMAX TinyHawk III&nbspQuadcopter.

This frame kit is for the EMAX TinyHawk III Quadcopter.

Flywoo Firefly Nano Baby V1.2 40mm 1.6" Frame Kit

This&nbspframe kit&nbspis for the&nbspFirefly Nano Baby Quad,&nbspwhich is a 20g ultralight 1S drone for freestyle and cruising.

This frame kit is for the Firefly Nano Baby Quad, which is a 20g ultralight 1S drone for freestyle and cruising.

Flywoo Firefly Nano Baby 40mm 1.6" 1S Frame Kit - V1.2

Flywoo Firefly Nano Baby 40mm 1.6&quot 1S Frame Kit - V1.2

Happymodel

Happymodel V4 75mm Frame For Moblite7 and Mobula7

The new V4 frame for the Mobula 7, Moblite 7, Mobula 7 1S and Mobula 7 1S HD. This revision upgrades the chassis to be more rugged with a lower mounting point for flight controllers, and not block the USB port. Compared to the V2 frame, the weight has increased by 1g, but it is more resistant to falls and offers better stability.
Check out the rest of our Happymodel gear, Our Moblite 7 collection, and our Mobula 7 collection as well!

Specifications

Wheelbase: 75mm
Maximum Propeller size: 40mm
Color: White or Black

Weight: 5.4g

Includes

1x HappyModel V4 75mm Frame For Moblite 7 / Mobula 7 / Mobula 7 1S - Choose Color


The new V4 frame for the Mobula 7, Moblite 7, Mobula 7 1S and Mobula 7 1S HD. This revision upgrades the chassis to be more rugged with a lower mounting point for flight controllers, and not block the USB port. Compared to the V2 frame, the weight has increased by 1g, but it is more resistant to falls and offers better

HappyModel V4 75mm Whoop Frame For Moblite7 / Mobula7 / Mobula7 1S - Choose Color from WREKD Co.

HappyModel V4 75mm Whoop Frame For Moblite7 / Mobula7 / Mobula7 1S - Choose Color

This&nbspV4&nbsp75mm frame is for the Happymodel&nbspMoblite7&nbspand&nbspMobula7. This new version is more durable with a thicker frame, increasing the weight from 4.4g to 5.4g. The V4 is also now equipped with a lower FC mount position which no longer blocks the USB port.&nbsp

This V4 75mm frame is for the Happymodel Moblite7 and Mobula7. This new version is more durable with a thicker frame, increasing the weight from 4.4g to 5.4g. The V4 is also now equipped with a lower FC mount position which n

Happymodel 75mm V4 Frame for Moblite7/Mobula7

NewBeeDrone

NewBeeDrone Cockroach 75 Brushless Extreme Durable Frame

Design Intent Behind the Frame:For this frame we worked to develop a platform that would neither fall below expectations nor limit the creativity of the FPV community. Lightweight and versatile. We improved durability and worked to deliver a vibrational signature that made tuning easier so you can get the most performance out of the NewBeeDrone flight controllers and motors. Every gram of frame material was either added or taken away to ensure that what was left, was there for a reason.Lightweight and Durable:We found a more forgiving and resilient material that doesn't sacrifice in weight or stiffness. Struts and other key support components have been redesigned to distribute and dissipate stress from crashes and falls with a total weight 6.98g.Traditional Looks and Geometry:This 75mm Cockroach frame has adaptable FC locations and a multitude of additional mounting points across the frame. We delivered a frame that has 2 board locations with 1x1inch or 25.4x25.4mm hole spacing. One mounting location on top and another below to mount an additional board like a DVR or a 4K HD recording board. The 2-board mounting adaptability allows for the possibility for a pusher-style flying configuration to be used as well.1mm Carbon Fiber PlateA 1mm carbon plate is included for increased durability insurance. Though the frame can be flown without it, the carbon allows for additional adaptability and opens the frames use for exciting opportunities in a pusher-style configuration. Flip the frame over and install. Please be aware, the motor screws that come with the 75mm frame are expected to be used with the carbon fiber. If you choose to use them without the carbon fiber plate â€“ the screws may contact the motor PCB. Please be aware.Flexible Battery SolutionsThis 75mm frame does not come with just one limiting battery mounting solution. We understand that depending on the utility and flying style, many people want to run one or two 300mah Nitro Nector Golds in the traditional battery position or in a â€˜toilet-tankâ€™ position. We have developed several printable, TPU, battery mount solutions to use with the frame and are always open to your suggestions.Easy and Inexpensive. None of this is any good if its super difficult to use and/or super expensive. So we made sure we set out to make something affordable. Key tolerances have also been fine tuned to make installation and removal much easier.Any of our other whoop BNF's can be directly dropped-in into the 75mm frame. However, in some cases, the motor wires are just a touch too short. We recommend picking up some longer motor wires just in case.JST Whoop Motor Wire Replacement SetRecommended Setups:Controlled Indoor: NBD BeeBrain Brushless v2BeeEye Camera with Goober Canopy1x 1s Battery â€“ 300mah Nitro Nector Gold NBD Gold Motors 18000kvNBD 40mm Azi Props*Optional:1mm Carbon Fiber Plate1s TPU Battery Mount Setup1s Battery Sling (if not using the Carbon Fiber Plate) Insta360 Go MountOutdoor or long range: NBD BeeBrain Brushless v1BeeEye Camera with Goober CanopyCrossfire nano receiverNBD Silver Motors 16420kvNBD 40mm Azi Props2S Series adaptor cable*Optional:1mm Carbon Fiber Plate2x 1s TPU Battery Mount Setup2x1s Battery Sling (if not using the Carbon Fiber Plate)Battery mount for 1s Nitro Nectar included3D Print parts:1S 1NitroNectar Gold Battery mount2S 2NitroNectar Gold Battery Mount For HD Whoop1S 1xNitroNectar  GoldBattery Mount without Carbon fiber plate2S 2x NitroNectar Gold Battery mount without carbon fiber plate1S Large size battery 450mah


Design Intent Behind the Frame:For this frame we worked to develop a platform that would neither fall below expectations nor limit the creativity of the FPV community. Lightweight and versatile. We improved durability and worked to deliver a vibrational signature that made tuning easier so you can get the most performa

NewBeeDrone Cockroach 75mm Brushless Frame

NewBeeDrone worked to develop a platform that would neither fall below expectations nor limit the creativity of the FPV community. Lightweight and versatile. We improved durability and worked to deliver a vibrational signature that made tuning easier so you can get the most performance out of the NewBeeDrone flight controllers and motors.&nbsp

NewBeeDrone worked to develop a platform that would neither fall below expectations nor limit the creativity of the FPV community. Lightweight and versatile. We improved durability and worked to deliver a vibrational signature that made tuning easier

NewBeeDrone Cockroach 75 Brushless Extreme Durable Frame (Clear)

EMAX Nanohawk Polycarbonate Frame

A replacement or spare frame for the&nbspEMAX Nanohawk 1S Micro Brushless FPV Drone.

A replacement or spare frame for the EMAX Nanohawk 1S Micro Brushless FPV Drone.

EMAX Nanohawk 1S Micro Polycarbonate Frame

A Polycarbonate Frame Piece for your EMAX Nanohawk! Check out our Emax Nanohawk Collection and the rest of our EMAX Products! Specifications: Material: Polycarbonate Package Includes: 1 x EMAX Nanohawk Spare Parts - Polycarbonate Frame Kit

EMAX Nanohawk Spare Parts - Polycarbonate Frame

BetaFPV

BetaFPV Beta65S V4 Brushed Whoop Frame 

BETAFPV

This is the BETAFPV Beta65S V4 brushed whoop frame! Can be used as a replacement or spare part to the&nbspBeta65S whoop quadcopters&nbspuse on 7x16mm&nbsp19000KV motors.&nbsp

This is the BETAFPV Beta65S V4 brushed whoop frame! Can be used as a replacement or spare part to the Beta65S whoop quadcopters use on 7x16mm 19000KV motors. 

BETAFPV Beta65S V4 Brushed Whoop Frame 

BetaFPV Meteor75 V2 Whoop Frame

The BETAFPV Meteor 75 V2 is an ultralight 75mm 1S brushless frame that only weights 5.68g, but it's still durable enough!

BetaFPV Meteor75 Micro Brushless Whoop Frame - V2

Happymodel Mobula 6 Frame

This is a replacement frame for both the&nbspHappymodel Mobula6&nbsp(including HD version) and the&nbspHappymodel Moblite6.&nbsp

This is a replacement frame for both the Happymodel Mobula6 (including HD version) and the Happymodel Moblite6. 

Happymodel Mobula6/Mobula6 HD/Moblite6 Frame (Transparent White)

BetaFPV Meteor75 Whoop Frame

Meteor75 Micro Brushless Whoop Frame
 
Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable enough. Specially designed the following point.

Adjusted the height of the frame, the lowest point of frame is the motor position, battery can be protected while the drone is landing.
Increased the height of the frame loop to protect the propeller better.

Best recommended for Advanced kit drone - Meteor75 Lite and Meteor75.
 
Specification

Item: Meteor75 frame
Material: Plastic

Size: 75mm
Weight: 5.68/pc
Color: White/Blue
Motor mounting hole: For 0603 motor, 1102 Series Motors and 0802 Series Motors

FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern


 
Recommended Parts

Propellers: 40mm 4-blade props (1.5mm shaft hole)

Motors: 0603 and 0802 Series Brushless Motors /1102 Series Motors

Batteries: BT2.0 450mAh 1S Battery

FC: F4 AIO 1S Brushless FC/ 1-2S AIO Brushless FC



Meteor75 Micro Brushless Whoop Frame   Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable enough. Specially designed the following point. Adjusted the height of the frame, the lowest point of frame is the motor

Meteor75 Micro Brushless Whoop Frame

Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable. 
Check out all our whoop frames &amp accessories and all our BetaFPV gear!
Features

Meteor75 frame is ultralight only 5.68g, light but durable enough. 
The motor mount position uses a quadrilateral stretch structure, the frame is more durable and stable. 
The height of the frame has been adjusted, the lowest point of the frame is the motor position, the battery can be protected while the drone is landing. It also increased the height of the frame loop to protect the propeller better.
Designed two different motor mounting holes that support 0603, 0802 and 1102 brushless motors at the same time.
With a 26mm*26mm FC mounting columns can match whoop style FC.




Specification

Material: Plastic

Size: 75mm
Weight: 5.68/pc
Motor mounting hole: For 0603 motor, 1102 Series Motors and 0802 Series Motors

FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern


Includes

1x BetaFPV Meteor75 Whoop Frame 


Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable.  Check out all our whoop frames &amp; accessories and all our BetaFPV gear! Features Meteor75 frame is ultralight only 5.68g, light but durable enough.  The m

BetaFPV Meteor75 Whoop Frame - Choose Color

Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable enough. Specially designed the following point. 

Adjusted the height of the frame, the lowest point of frame is the motor position, battery can be protected while the drone is landing.
Increased the height of the frame loop to protect the propeller better.

Best recommended for Advanced kit drone - Meteor75 Lite and Meteor75.


Bullet Point

Meteor75 frame is ultralight only 5.68g, light but durable enough. 
The motor mount position uses a quadrilateral stretch structure, the frame is more durable and stable. 
The height of the frame has been adjusted, the lowest point of the frame is the motor position, the battery can be protected while the drone is landing. It also increased the height of the frame loop to protect the propeller better.
Designed two different motor mounting holes that support 0603, 0802 and 1102 brushless motors at the same time. 
With a 26mm*26mm FC mounting columns can match whoop style FC.

Specification

Item: Meteor75 frame
Material: Plastic

Size: 75mm
Weight: 5.68/pc
Color: White/Blue
Motor mounting hole: For 0603 motor, 1102 Series Motors and 0802 Series Motors

FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern



Recommended Parts

Propellers: 40mm 4-blade props (1.5mm shaft hole)

Motors: 0603 and 0802 Series Brushless Motors /1102 Series Motors

Batteries: BT2.0 450mAh 1S Battery, BT2.0 550mAh 1S Battery

Screws: Meteor Series Motor Fixing Screws Pack (40PCS)

FC: F4 AIO 1S Brushless FC/ 1-2S AIO Brushless FC



Package

1 * Meteor75 Micro Brushless Whoop Frame



Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable enough. Specially designed the following point. Adjusted the height of the frame, the lowest point of frame is the motor position, battery can be protected whi

Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable. 
Check out all our whoop frames &ampamp accessories and all our BetaFPV gear!
Features

Meteor75 frame is ultralight only 5.68g, light but durable enough. 
The motor mount position uses a quadrilateral stretch structure, the frame is more durable and stable. 
The height of the frame has been adjusted, the lowest point of the frame is the motor position, the battery can be protected while the drone is landing. It also increased the height of the frame loop to protect the propeller better.
Designed two different motor mounting holes that support 0603, 0802 and 1102 brushless motors at the same time.
With a 26mm*26mm FC mounting columns can match whoop style FC.




Specification

Material: Plastic

Size: 75mm
Weight: 5.68/pc
Motor mounting hole: For 0603 motor, 1102 Series Motors and 0802 Series Motors

FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern


Includes

1x BetaFPV Meteor75 Whoop Frame 


BetaFPV Meteor75 Whoop Frame - Choose Color from WREKD Co.

This Beta75 Pro 2 Frame is an ultralight-whoop-style frame with a 75mm wheelbase. This frame is&nbspcustomized for&nbspBeta75 Pro 2&nbspand&nbspMeteor75 1S Whoop&nbspDrone!

This Beta75 Pro 2 Frame is an ultralight-whoop-style frame with a 75mm wheelbase. This frame is customized for Beta75 Pro 2 and Meteor75 1S Whoop Drone!

BetaFPV Meteor75 / Beta75 Pro 2 Whoop Frame

BetaFPV Meteor65 Whoop Frame

Latest appearance of 65mm 1S brushless frame for Meteor65 Brushless Whoop Quadcopter. With a marvellous design on battery slot which keeps a low profile and triangle bilateral stretch structure of motor mounting position, this frame wights 3.14g only.Compared to previous 65mm brushless frames, with the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness.Meteor65 1S brushless frameâ€™s motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. It provides you more durable and smoother flight experience.The ultra-light and durable frame is PP material only 3.14g, which is one of the lightest frames with 26mm*26mm FC mounting columns can match whoop style flight controller.The material of 31mm 3-blade props is PC plastic with the 1.0mm shaft inner diameter. Suitable for 0603 and 080X series brushless motors.SPECIFICATIONItem: Meteor65 frameMaterial: PPSize: 65mmWeight: 3.14/pcColor: Transparent/Blue/Black/Green/Pink/OrangeMotor mounting hole: For 0603 motor and 080X Series MotorsFC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern

Latest appearance of 65mm 1S brushless frame for Meteor65 Brushless Whoop Quadcopter. With a marvellous design on battery slot which keeps a low profile and triangle bilateral stretch structure of motor mounting position, this frame wights 3.14g only.Compared to previous 65mm brushless frames, with the low profile of b

BETAFPV Meteor65 Micro Brushless Whoop Frame

The latest appearance of 65mm 1S brushless frame for Meteor65 Brushless Whoop Quadcopter. With a marvelous design on battery slot which keeps a low profile and triangle bilateral stretch structure of motor mounting position, this frame wights 3.14g only. Only frame included Features Compared to previous 65mm brushless 

BETAFPV Meteor65 Micro Brushless Whoop Frame (CHOOSE COLOR)

Spare replacement part for the BetaFPV Meteor65 Whoop.
Check out all our Meteor65 parts &ampamp accessories, the rest of our whoop frames &ampamp accessories and all our BetaFPV gear!
Features

Compared to previous 65mm brushless frames, with the low profile of battery slot height, the drone&#39s gravity center is reduced and improved the sense of compactness.
Meteor65 1S brushless frame’s motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. It provides you more durable and smoother flight experience.
The ultra-light and durable frame is PP material only 3.14g, which is one of the lightest frames with 26mm*26mm FC mounting columns can match whoop style flight controller.
The material of 31mm 3-blade props is PC plastic with the 1.0mm shaft inner diameter. Suitable for 0603 and 080X series brushless motors.


Specifications


Item: Meteor65 frame
Material: PP
Size: 65mm
Weight: 3.14/pc
Color: Transparent/Blue/Black/Green/Pink/Orange
Motor mounting hole: For 0603 motor and 080X Series Motors

FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern


Upgrade


With the low profile of battery slot height, the drone&#39s gravity center is reduced and improved the sense of compactness.






Using triangle bilateral stretch structure, makes frame more aesthetic. 





Lightest frame weights 3.14g only, with 26mm*26mm FC mounting columns can match whoop style flight controller.



Includes

1x BetaFPV Meteor65 Whoop Frame


Spare replacement part for the BetaFPV Meteor65 Whoop. Check out all our Meteor65 parts &amp; accessories, the rest of our whoop frames &amp; accessories and all our BetaFPV gear! Features Compared to previous 65mm brushless frames, with the low profile of battery slot height, the drone's gravity center is reduced and 

BetaFPV Meteor65 Whoop Frame - Choose Your Color from WREKD Co.

BetaFPV Meteor65 Whoop Frame - Choose Your Color

The latest appearance of 65mm 1S brushless frame for&nbspMeteor65 Brushless Whoop Quadcopter.

The latest appearance of 65mm 1S brushless frame for Meteor65 Brushless Whoop Quadcopter.

BetaFPV Meteor65 Micro Brushless Whoop Frame

Spare replacement part for the BetaFPV Meteor65 Whoop.
Check out all our Meteor65 parts &amp accessories, the rest of our whoop frames &amp accessories and all our BetaFPV gear!
Features

Compared to previous 65mm brushless frames, with the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness.
Meteor65 1S brushless frame’s motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. It provides you more durable and smoother flight experience.
The ultra-light and durable frame is PP material only 3.14g, which is one of the lightest frames with 26mm*26mm FC mounting columns can match whoop style flight controller.
The material of 31mm 3-blade props is PC plastic with the 1.0mm shaft inner diameter. Suitable for 0603 and 080X series brushless motors.


Specifications


Item: Meteor65 frame
Material: PP
Size: 65mm
Weight: 3.14/pc
Color: Transparent/Blue/Black/Green/Pink/Orange
Motor mounting hole: For 0603 motor and 080X Series Motors

FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern


Upgrade


With the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness.






Using triangle bilateral stretch structure, makes frame more aesthetic. 





Lightest frame weights 3.14g only, with 26mm*26mm FC mounting columns can match whoop style flight controller.



Includes

1x BetaFPV Meteor65 Whoop Frame


EMAX Tinyhawk Frame with Battery Holder

The Emax Tinyhawk part frame is an indoor, lightweight and affordable frame that gives you increased durability compared to stock frames. 

EMAX Tinyhawk Frame with Battery Holder (Choose Color)

Frame Material: PolypropyleneSize: 75mm motor to motor L 110mm x W 95mm x H 39mm

Spare Frame EMAX Tinyhawk ***CHOOSE COLOR***

Happymodel Mobula7 V2 75mm Frame

Replacement frame for the Mobula7 by HappyModel
High-performance Brushless whoop Frame for Indoor FPV, lightweight and durable.
Compatible with most 0603/0703 brushless motors.
Browse the rest our Happymodel products! 
Specifications


Wheelbase:75mm
Weight:4.4g

Includes


1x HappyModel Mobula7 V2 75mm Replacement Whoop Frame 


 

 

Replacement frame for the Mobula7 by HappyModel High-performance Brushless whoop Frame for Indoor FPV, lightweight and durable. Compatible with most 0603/0703 brushless motors. Browse the rest our Happymodel products!  Specifications Wheelbase:75mm Weight:4.4g Includes 1x HappyModel Mobula7 V2 75mm Replacement Whoop Fr

HappyModel Mobula7 V2 75mm Replacement Whoop Frame - Choose Your Color from WREKD Co.

HappyModel Mobula7 V2 75mm Replacement Whoop Frame - Choose Your Color

Mobula7 brushless whoop frame by Happymodel.

Happymodel Mobula7 Brushless Whoop Frame

HAPPYMODEL

NewBeeDrone Cockroach Super-Durable Whoop Frame

NewBeeDrone Cockroach Brushless Super-Durable Frame 65mm
Frustrated with constantly fixing struts and breaking frames, we set out to find something better.
We worked with a number of manufacturers and after numerous prototypes and revisions, we are proud to introduce the Cockroach Super-Durable Brushless Frame for Tiny Whoop style quads.
Traditional Looks and Geometry maintain those flight characteristics you are used to and ensure easy compatibility with the Beebrain as well as most other popular flight controllers.Lightweight and Durable.
We found a more forgiving and resilient material that doesn't sacrifice in weight or stiffness. Struts and other key support components have been redesigned to distribute and dissipate stress from crashes and falls.
Total weight 3.71g
Easy and Inexpensive. None of this is any good if its super difficult to use and super expensive. So we made sure we set out to make something affordable. Key tolerances have also been fine tuned to make installation and removal much easier.

NewBeeDrone Cockroach Brushless Super-Durable Frame 65mm Frustrated with constantly fixing struts and breaking frames, we set out to find something better. We worked with a number of manufacturers and after numerous prototypes and revisions, we are proud to introduce the Cockroach Super-Durable Brushless Frame for Tiny

NewBeeDrone Cockroach Brushless Super-Durable Frame 65mm

Named for its ability to withstand punishment, the Cockroach frame is an affordable Tiny Whoop style frame that gives you increased durability compared to stock frames. 

Cockroach Super-Durable Frame

NewBeeDrone Cockroach Brushed FramePlease note: Each color could have slightly different durability due to the material used to produce different colors.Specifications:Motor size: 6mm (6-14)Frame size: 65mmProp size: 31mmWeight: 3.44g

NewBeeDrone Cockroach Brushed Super Durable Frame

Lumenier

Lumenier QAV-PRO Whoop 2.5" Frame Kit - Cinequads Edition

LUMENIER

The Lumenier QAV-PRO Micro Whoop - Cinequads Edition is a versatile 2.5" micro-sized FPV quadcopter that is designed to be small and agile. Featuring full propeller protection with premium carbon fiber, while carrying your HD camera for the ultimate micro FPV cinema experience.Lumenier has once again teamed up with Cinequads, founded by the world-renowned FPV pilot Phil Freybott! Now bringing you the ultimate micro cinematography whoop. Phil has many years of experience shooting professionally with FPV drones on TV commercial sets, and movies. You can find his work showcased with automotive brands like Porsche and Mercedes.Combining Cinequads' professional experience and optimized workflow with Lumenier's high-quality design and manufacturing, we are excited to bring you the next professional class of FPV Cine drones... the Lumenier QAV-PRO line.
Check out the rest of our Lumenier products or the rest of our 2.5" Micro Frames.
Features

Designed by Lumenier in collaboration with Cinequads
Supports HD Action Camera Mounting
Great for Professional Cinematic Use
Designed for both Analog and HD
Molded Foam Bumper Protection
Pusher Style Frame
Ultra-lightweight





ADDED PROTECTION WTH MOLDED FOAM BUMPERSThe QAV-PRO Micro Whoop gives you the option to fly with only the Carbon Fiber frame, or with added protection provided by the snap-on foam bumpers. Flying close to people or objects that you need a little more security? No problem! Simply pop on the foam pads in seconds and you're good to go. When you're done you can take them back off and fly again with just the carbon guards. So simple!SUPPORTS GOPRO / HD CAMERA MOUNTINGWant to add 4k buttery smooth video recording to your QAV-PRO? No problem! the frame is designed to carry a GoPro style camera with a dedicated camera mount on top. This allows a variety of cameras and 3-D prints to securely hold the HD camera in place making sure you get the perfect shot!DESIGNED FOR BOTH ANALOG AND HDThe QAV-PRO Micro Whoop frame was designed from the ground up to be very versatile and allow many different configurations with the same design. This one airframe design fits 20x20 stacks, 25.5x25.5 toothpick AIO boards, and Caddx Vista digital HD system. This frame has mounting points for an antenna, camera, receiver, transmitter, and more. Now you can fly in full digital HD in an incredibly small package!PUSHER STYLE FRAMEThe Lumenier QAV-PRO Micro Whoop airframe design supports a pusher configuration. it was found to have 15-20% more flight time and an even better throttle response. Many "pusher" style frames struggle to easily take off from the ground since their props are often resting on the surface, but with the QAV-PRO Micro Whoop... it's no problem since the entire prop is surrounded by carbon fiber. This gives you plenty of clearance to take off and land without any issue.ULTRA-LIGHTWEIGHTWith an all-up weight of just 53g, this airframe is top in class. It has the perfect balance of durability and protection that you need, without any extra dead weight that you don't. The body is made up of ultra-strong 3K carbon fiber. Combined with custom light-weight quick-swap battery straps and M2 hardware, this kit is the perfect 2.5" setup.
Specifications

Weight: 53g (66g with bumpers and lipo straps)
Dimension: 180mm x 155mm x 53mm
Material: 2mm Quasi-Isortropic Japanese Carbon Fiber (Matte Finish)
Motor Bolt Pattern: 9x9mm


Includes

1x Lumenier QAV-PRO Micro Whoop Cinequads Edition 2.5" Frame Kit



1x Hardware Set (Steel M2 Screws, M2 Stack Screws and Spacers, Aluminum Standoffs, Rubber O-rings, Nuts)
1x 3D Printed Universal Camera Mount Base
2x 1mm Carbon Fiber Camera Side Plate
1x 2mm Carbon Fiber Bumper Plate
1x 2mm Carbon Fiber Motor Plate
1x Foam Battery Pad
4x Foam Bumpers



The Lumenier QAV-PRO Micro Whoop - Cinequads Edition is a versatile 2.5" micro-sized FPV quadcopter that is designed to be small and agile. Featuring full propeller protection with premium carbon fiber, while carrying your HD camera for the ultimate micro FPV cinema experience.Lumenier has once again teamed up with Cin

Lumenier QAV-PRO Whoop Cinequads Edition 2.5" Micro Frame Kit

Fractal Engineering

Fractal Engineering Fractal 75 Pro Max Frame Kit

FRACTALENGINEERING

From motorpost to motorpost on this frame, the distance is 84mm.
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 75 Pro Max was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 75 Pro Max whoop micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 75 Pro Max Whoop Micro-frame kit and BetaFPV Meteor75 Pro Whoop Frame.
Note: This is designed for prop guards that fit 45mm props like the Meteor75 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro Version has been scaled to the max to fit 45mm props 
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!
Features

A completely new variant of the F75, but this is actually 84mm motorpost to motorpost distance.

The same winning recipe, scaled to fit 45mm props with ducts while keeping the camera up front

Extended camera mount to reduce prop guards in view

Low center of gravity, by bringing the AIO close to the frame/motors

Allows mounting with USB pointed up for easy accelerometer calibration

Easy maintenance, break a duct, replace only the single duct

No need for a canopy as all electronics are tucked safely between the ducts

Approximately 21g using the Happymodel DiamondF4 AIO

Recommended Parts List


Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color


Gemfan Ducted 1815 Bi-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color

HappyModel RS 0802 20,000Kv Micro Motor - Choose Version

HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version

HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz

HappyModel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX




FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations






Specifications

CF Weight: 2.21g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 75 Micro Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro Blue


From motorpost to motorpost on this frame, the distance is 84mm. Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, th

Fractal Engineering Fractal 75 Pro Max Micro/Whoop Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro Blue

Fractal Engineering Fractal 75 Pro Max Micro/Whoop Frame Kit - Pro Lit

From motorpost to motorpost on this frame, the distance is 84mm.
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 75 Pro Max was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 75 Pro Max whoop micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 75 Pro Max Whoop Micro-frame kit and BetaFPV Meteor75 Pro Whoop Frame.
Note: This is designed for prop guards that fit 45mm props like the Meteor75 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro Version has been scaled to the max to fit 45mm props 
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!
Features

A completely new variant of the F75, but this is actually 84mm motorpost to motorpost distance.

The same winning recipe, scaled to fit 45mm props with ducts while keeping the camera up front

Extended camera mount to reduce prop guards in view

Low center of gravity, by bringing the AIO close to the frame/motors

Allows mounting with USB pointed up for easy accelerometer calibration

Easy maintenance, break a duct, replace only the single duct

No need for a canopy as all electronics are tucked safely between the ducts

Approximately 21g using the Happymodel DiamondF4 AIO

Recommended Parts List


Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color


Gemfan Ducted 1815 Bi-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color

HappyModel RS 0802 20,000Kv Micro Motor - Choose Version

HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version

HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz

HappyModel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX




FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations






Specifications

CF Weight: 2.21g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 75 Micro Frame Kit - Choose Your Version


Fractal Engineering Fractal 75 Pro Max Micro/Whoop Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro Cyan

From motorpost to motorpost on this frame, the distance is 84mm.
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 75 Pro Max was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 75 Pro Max whoop micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 75 Pro Max Whoop Micro-frame kit and BetaFPV Meteor75 Pro Whoop Frame.
Note: This is designed for prop guards that fit 45mm props like the Meteor75 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro Version has been scaled to the max to fit 45mm props 
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!
Features

A completely new variant of the F75, but this is actually 84mm motorpost to motorpost distance.

The same winning recipe, scaled to fit 45mm props with ducts while keeping the camera up front

Extended camera mount to reduce prop guards in view

Low center of gravity, by bringing the AIO close to the frame/motors

Allows mounting with USB pointed up for easy accelerometer calibration

Easy maintenance, break a duct, replace only the single duct

No need for a canopy as all electronics are tucked safely between the ducts

Approximately 21g using the Happymodel DiamondF4 AIO

Recommended Parts List


Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color


Gemfan Ducted 1815 Bi-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color

HappyModel RS 0802 20,000Kv Micro Motor - Choose Version

HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version

HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz

HappyModel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX




FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations






Specifications

CF Weight: 2.21g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 75 Micro Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro White


Fractal Engineering Fractal 75 Pro Max Micro/Whoop Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro White

Fractal Engineering Fractal 65 Frame Kit













Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 65 Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Whoop Micro Frame kit and HappyModel Mobula6 Whoop frame. 
Note: You're gonna want to cut ducts from either an NBD, BetaFPV, or Happymodel 65mm whoop frame, and that will serve as your protection for your motor and propellers. This also allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!












Features

65mm diagonal, squished X geometry, for 31mm props
1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct

Recommended Part List

Gemfan Durable 1210 Bi-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft)

Gemfan 1219-3 Durable Tri-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft) - Choose Your Color


HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

 HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version


 HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz



 FEA optimization test preformed ensuring the stress gets spread out across the whole structure without concentrations


Specifications

CF Weight: 1.6g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 65 Micro Frame Kit - Lite Kit + Mob6 Blue


Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 was designed for you! This kit contains all you

Fractal Engineering Fractal 65 Micro/Whoop Frame Kit - Lite Kit + Mob6 Blue

Fractal Engineering Fractal 65 Micro/Whoop Frame Kit - Lite Kit + Mob6













Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 65 Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Whoop Micro Frame kit and HappyModel Mobula6 Whoop frame. 
Note: You're gonna want to cut ducts from either an NBD, BetaFPV, or Happymodel 65mm whoop frame, and that will serve as your protection for your motor and propellers. This also allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!












Features

65mm diagonal, squished X geometry, for 31mm props
1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct

Recommended Part List

Gemfan Durable 1210 Bi-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft)

Gemfan 1219-3 Durable Tri-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft) - Choose Your Color


HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

 HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version


 HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz



 FEA optimization test preformed ensuring the stress gets spread out across the whole structure without concentrations


Specifications

CF Weight: 1.6g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 65 Micro Frame Kit - Lite Kit + Mob6 Clear


Fractal Engineering Fractal 65 Micro/Whoop Frame Kit - Lite Kit + Mob6 Clear

BetaFPV Meteor65 Air Whoop Frame












The Meteor65 frame has been upgraded to the Meteor65 Air Brushless Whoop Frame, reducing the minimum weight to an impressive 2.67 grams. This remarkable frame features enhanced strength and durability plus a new motor fixed slot and optimized low profile design, making it the ultimate choice for those seeking a Sub18g 65mm 1S Whoop drone with an ultra-light structure.











Check out all our whoop frames &amp accessories and all our BetaFPV gear!
Features

Weighing a mere 2.67g, this Meteor65 Air Brushless Whoop Frame exemplifies exceptional ultra-light structure while maintaining remarkable durability and crash resistance.

A groundbreaking addition to the 65mm frame, the inclusion of motor fixed slots enhances the convenience and stability of the motor installation.The low profile design effectively concentrates the whoop drone's gravity, optimizing its flight performance.

The deliberate increase in whoop duct diameter effectively mitigates the risk of propeller strikes, ensuring seamless compatibility with 0702 motors and 0802 motors, and 31mm propellers.


ComparisonBased on the Meteor65 frame, we have optimized and upgraded in many aspects, the details are as follows.

The duct diameter is enlarged from 32mm to 34.9mm, which improves compatibility and avoids propeller strikes.

The weight is reduced from 3.14g to 2.67g, making the flight more flexible, exemplifying the exceptional ultra-light structure of the 1S whoop drone. Both frames feature the same materials and durability.

With the low profile of frame, the drone's gravity center is more concentrated and improves the sense of compactness.

Motor Fixed SlotIn a groundbreaking development, the Meteor65 Air Brushless Whoop Frame has been added firstly with motor fixed slots, facilitating a more expedient and steadfast motor installation process. While misalignment has no measurable effect on motor efficiency, correct shaft alignment ensures the smooth, efficient transmission of power from the motor to the flight controller, reduces mechanical stress, and minimizes power wastage. For advanced pilots who have strict requirements for assembling the ultra-light 1S whoop drone, this new design undoubtedly adds the finishing touch.

Endless PersonalizationWe enhance frame structure design and also provide diverse color options for drone frames, enabling greater freedom for choice. This allows for aligning or color clashing the frame color with your drone's theme. And equipped with our various colors of ultra-light Micro Air Canopy adds more possibility of capturing the optimal image. Your drone will capture people's attention and showcase your unique personality and creativity.
Micro Air CanopyWe also have devised an exceedingly light Micro Air Canopy, weighing a mere 0.74g, that not only facilitates camera angle adjustment from 25° to 50° but also has antenna mounts, incorporated at the tail. If your goal is to optimize canopy functionality while minimizing weight to obtain a Sub18g 65mm Whoop, this option stands as the definitive choice.

Specifications

Item: Meteor65 Air Brushless Whoop Frame
Material: PP
Weight: 2.67g
Wheelbase: 65mm
Motor Mounting: 3-M1.4-6.6mm
Flight Control Installation Hole: 26×26mm
Battery Slot Size: 11.6×6.0mm
Color: Black, White, Transparent White, Transparent Blue, Transparent Purple, Transparent Green

Includes

1x Meteor65 Air Brushless Whoop Frame - Choose Your Color


The Meteor65 frame has been upgraded to the Meteor65 Air Brushless Whoop Frame, reducing the minimum weight to an impressive 2.67 grams. This remarkable frame features enhanced strength and durability plus a new motor fixed slot and optimized low profile design, making it the ultimate choice for those seeking a Sub18g 

Meteor65 Air Brushless Whoop Frame - Choose Your Color

Flywoo Firefly FR16 Nano Baby V2.0 Walksnail Micro 1.6" Frame Kit

Build your own version of the Firefly FC16 micro quad, with this micro frame kit.
Check out our other Micro frames, as well as other great products from Flywoo!
Features

Compatible with 40mm propellers


Specifications

Weight: 3.8g

Motor Bolt Pattern: 6mm Tri-Mount
Stack Size: 25x25mm

Includes

1x Flywoo Firefly FR16 Nano Baby V2.0 1.6&quot Walksnail Micro Frame Kit


Build your own version of the Firefly FC16 micro quad, with this micro frame kit. Check out our other Micro frames, as well as other great products from Flywoo! Features Compatible with 40mm propellers Specifications Weight: 3.8g Motor Bolt Pattern: 6mm Tri-Mount Stack Size: 25x25mm Includes 1x Flywoo Firefly FR16 Nano

Flywoo Firefly FR16 Nano Baby V2.0 1.6" Walksnail Micro Frame Kit from WREKD Co.

Flywoo Firefly FR16 Nano Baby V2.0 1.6

Flywoo Firefly FR16 Nano Baby V2.0 1.6" Walksnail Micro Frame Kit

FLYWOO

Build your own version of the Firefly FC16 micro quad, with this micro frame kit.
Check out our other Micro frames, as well as other great products from Flywoo!
Features

Compatible with 40mm propellers


Specifications

Weight: 3.8g

Motor Bolt Pattern: 6mm Tri-Mount
Stack Size: 25x25mm

Includes

1x Flywoo Firefly FR16 Nano Baby V2.0 1.6" Walksnail Micro Frame Kit


BetaFPV Meteor75 Pro Whoop Frame











Be bold and brave with the BetaFPV Meteor75 Pro Whoop Frame! Choose from seven vibrant colors. Meteor75 Pro is durable, lightweight (7.73g) and the motor holder is strong for stable flying. Uses 1102/0802SE Triangle mount motors and accommodates a larger 1S batteries. Perfect for 45mm props increases thrust for 1S whoops, with HD digital VTX.
Check out all our whoop frames &amp accessories and all our BetaFPV gear!










Features

Meteor75 Pro Brushless Whoop Frame is durable enough with a lightweight of 7.73g.
The motor holder utilizes a triangle bilateral stretch structure, extremely strong for motor installation. So flying is stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802 Brushless Motors.
The battery slot is bigger. Pilots can use a larger 1S battery with more capacity. Recommend BETAFPV 450mAh 1S Battery
The frame is perfect for 45mm propellers. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX.





Specification


Item: Meteor75 Pro Brushless Whoop Frame
Material: PP
Wheelbase: 80.8mm
Weight: 7.73g
Color: Black/Blue/Cyan/Yellow/Orange/White/Red
Motor mounting hole: 3-M1.4-φ6.6mm, 1102, 0802 Brushless Motors
FC mounting hole: 26x26mm, F4 1S 5A FC

Includes

1x BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color


Be bold and brave with the BetaFPV Meteor75 Pro Whoop Frame! Choose from seven vibrant colors. Meteor75 Pro is durable, lightweight (7.73g) and the motor holder is strong for stable flying. Uses 1102/0802SE Triangle mount motors and accommodates a larger 1S batteries. Perfect for 45mm props; increases thrust for 1S who

BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color

Meteor 75 Pro Brushless Whoop Frame
Built for the largest 1S brushless quadcopter with seven colors for choice. Featuring motor holders for convenient installation, and it has an improved battery slot, which makes a larger capacity 1S battery available. This really does improve stability and smooths out the flight. Fit with F4 1S 5A FC, 1102 and 45mm propellers, Meteor75 Pro Brushless Whoop Frame has an excellent thrust-to-weight ratio performance suitable for 1S HD whoop.

Bullet Point

Meteor75 Pro Brushless Whoop Frame is durable enough with a lightweight of 7.73g.
The motor holder utilizes a triangle bilateral stretch structure, extremely strong for motor installation. So flying is stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802SE Brushless Motors.

The battery slot is bigger. Pilots can use a larger 1S battery with more capacity. Recommend BETAFPV 450mAh 1S battery. 
The frame is perfect for 45mm propellers like Gemfan 45mm 2-Blade/3-Blade props. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX.
The Meteor75 Pro frame is completely an upgrade choice for pilots who fly Meteor65, Meteor 65 Pro, or Meteor 75 brushless quadcopter. The electronic parts are compatible with it such as the F4 1S 5A flight controller. Just purchase 45mm props and recommend 1102 motors for more power.

Specification

Item: Meteor75 Pro Brushless Whoop Frame
Material: PP

Wheelbase: 80.8mm
Weight: 7.73g
Color: Black/Blue/Cyan/Yellow/Orange/White/Red
Motor mounting hole: 3-M1.4-φ6.6mm, 1102, 0802SE Brushless Motors
FC mounting hole: 26*26mm, F4 1S 5A FC


Larger 1S Drone Combo
Meteor75 Pro Frame with 45mm 2-Blade or 3-Blade props performs very precise, agile, and fantastic flying. It is compatible with parts on the 1S Meteor series whoops and is super easy to swap and upgrade build. With 45mm propellers, it is the largest 1S power whoop drone nowadays. It might be perfect for HD VTX indoors.
The battery slot is enhanced to a wider size of 16.7mm. Meteor75 Pro frame supports 450mAh, 550mAh 1S battery. Recommend using BT2.0 450mAh 1S Battery and other brand batteries that can fit the slot.

Meteor 75 Pro Brushless Whoop Frame Built for the largest 1S brushless quadcopter with seven colors for choice. Featuring motor holders for convenient installation, and it has an improved battery slot, which makes a larger capacity 1S battery available. This really does improve stability and smooths out the flight. Fit

Meteor 75 PRO Brushless Whoop Frame











Be bold and brave with the BetaFPV Meteor75 Pro Whoop Frame! Choose from seven vibrant colors. Meteor75 Pro is durable, lightweight (7.73g) and the motor holder is strong for stable flying. Uses 1102/0802SE Triangle mount motors and accommodates a larger 1S batteries. Perfect for 45mm props increases thrust for 1S whoops, with HD digital VTX.
Check out all our whoop frames &ampamp accessories and all our BetaFPV gear!










Features

Meteor75 Pro Brushless Whoop Frame is durable enough with a lightweight of 7.73g.
The motor holder utilizes a triangle bilateral stretch structure, extremely strong for motor installation. So flying is stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802 Brushless Motors.
The battery slot is bigger. Pilots can use a larger 1S battery with more capacity. Recommend BETAFPV 450mAh 1S Battery
The frame is perfect for 45mm propellers. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX.





Specification


Item: Meteor75 Pro Brushless Whoop Frame
Material: PP
Wheelbase: 80.8mm
Weight: 7.73g
Color: Black/Blue/Cyan/Yellow/Orange/White/Red
Motor mounting hole: 3-M1.4-φ6.6mm, 1102, 0802 Brushless Motors
FC mounting hole: 26x26mm, F4 1S 5A FC

Includes

1x BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color


BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color from WREKD Co.

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Motor Stator Size

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 

Flight Controllers

Camera Size

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 