FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

iFlight

iFlight BOB57 O3 6" Frame Kit

Introducing the iFlight BOB57 O3 Frame Kit, an innovative long-range HD drone conceptualized in a collaborative effort between iFlight and renowned pilot &amp videographer, Ellis van Jason.

Introducing the iFlight BOB57 O3 Frame Kit, an innovative long-range HD drone conceptualized in a collaborative effort between iFlight and renowned pilot & videographer, Ellis van Jason.

iFlight BOB57 O3 Ellis Van Jason Frame Kit

IFLIGHT

The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights.
Be sure to browse the rest of our iFlight products and DJI compatible frames, electronics and accessories.
Don't feel like building it but one one now!? We also carry the BNF!
Features

Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers
Solid antenna mount for less ocillations when using long antennas

H-shaped frame with robust middle section for less props in view
Gladiator shell protects from dust and water droplets
Front-mounting XT-60
Compatible with DJI O3 Air Unit and Vista

Specifications

Product Name: BOB57 O3 Frame Kit
Frame wheelbase: 278mm
Frame Dimension: L165 x W225 x H34 mm
Weight: 305g
Frame Body Dimension: 34mm
Arm Thickness: 6mm
Bottom Plate Thickness: 1.5mm
Top Plate Thickness: 2mm
Upper Plate Thickness: 2.5mm
Motor Mounting: 16 x 16mm
VTX Mounting: 25.5 x 25.5/Φ1.6mm, 20 x 20/Φ2mm

 

Includes

1 x BOB57 O3 Frame Kit
1 x BOB57 TPU Parts
1 x 215mm MIPI Video Cable for DJI O3 Air Unit
4 x Motor Wire Shield Tube
1 x Battery Anti-Slip Pad
2 x Battery Strap
1 x Screw Bag


The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp; videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights. Be sure

iFlight BOB57 O3 LR & Freestyle Cinematic 6" Frame Kit

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

Flywoo

Flywoo FlyLens 85 O3 2" 85mm Whoop Frame

Changelog:2024,01.01 : V1.2 Bottom Plate1：added support for 9mmx9mm motor mounting holes.2024.03.07: V1.3 Bottom Plate1: Reinforce the camera mounting holes for the bottom plate2: Optimize the width between the motor mounting holes and the periphery3: Original Micro-USB port, compatible with Type-C Description: The Fly

FlyLens 85 Frame kit（Standard \ Lite）













﻿This does not come with LEDs, those need to be bought separately.
The Flywoo FlyLens 85 85mm Whoop Frame provides superior strength and safety with its high-strength PC injection-molded protective ring. The O3\O3Lite Edition has a unique CNC damping platform for recording high-quality video with no jelly effect. It also features a bottom-mounted transmission PC placement compartment, quick-detachable frame for easy separation of parts, and reverse push propeller power for stable flight and longer endurance. You have the option to install your own O3, O3 lite, Walksnail, Vista, or HDZero system. Put some 1003 Motors on FlyLens 85 for a more agile build!












Check out the rest of our Whoop Frames &ampamp Accessories, and all our Flywoo products!




 


 Specifications

Brand: FLYWOO 

Model: Flylens 85

Main Board Thickness: 2mm 

CNC Gimbal Thickness: 1mm 

Protective Ring Material: PC+

Flight Control Hole Position: 25.5x25.5mm

VTX Mounting: 20/25.5mm Motor Hole

Position: 6.6mm/Hole 1.4mm

Propeller Size: 2 inch

Weight: 27g (Standard) \ 25.5g (Lite)

Camera Hole Position (Standard): 20mm

Camera Hole Position (Lite): 18mm

Includes

1x Flywoo FlyLens 85 85mm Whoop Frame - Choose Your Version


﻿This does not come with LEDs, those need to be bought separately. The Flywoo FlyLens 85 85mm Whoop Frame provides superior strength and safety with its high-strength PC injection-molded protective ring. The O3\O3Lite Edition has a unique CNC damping platform for recording high-quality video with no jelly effect. It al

Flywoo FlyLens 85 2" - 85mm Whoop Frame - Choose Your Version from WREKD Co.

Flywoo FlyLens 85 2

Flywoo FlyLens 85 2" - 85mm Whoop Frame - Choose Your Version

The Flywoo Flylens 85 Frame Kit is a 2-inch whoop-style frame designed for indoor and narrow space flight.&nbsp

The Flywoo Flylens 85 Frame Kit is a 2-inch whoop-style frame designed for indoor and narrow space flight. 

Flywoo FlyLens 85 Frame Kit (No LED) - Standard/Lite

FLYWOO













﻿This does not come with LEDs, those need to be bought separately.
The Flywoo FlyLens 85 85mm Whoop Frame provides superior strength and safety with its high-strength PC injection-molded protective ring. The O3\O3Lite Edition has a unique CNC damping platform for recording high-quality video with no jelly effect. It also features a bottom-mounted transmission PC placement compartment, quick-detachable frame for easy separation of parts, and reverse push propeller power for stable flight and longer endurance. You have the option to install your own O3, O3 lite, Walksnail, Vista, or HDZero system. Put some 1003 Motors on FlyLens 85 for a more agile build!












Check out the rest of our Whoop Frames &amp Accessories, and all our Flywoo products!




 


 Specifications

Brand: FLYWOO 

Model: Flylens 85

Main Board Thickness: 2mm 

CNC Gimbal Thickness: 1mm 

Protective Ring Material: PC+

Flight Control Hole Position: 25.5x25.5mm

VTX Mounting: 20/25.5mm Motor Hole

Position: 6.6mm/Hole 1.4mm

Propeller Size: 2 inch

Weight: 27g (Standard) \ 25.5g (Lite)

Camera Hole Position (Standard): 20mm

Camera Hole Position (Lite): 18mm

Includes

1x Flywoo FlyLens 85 85mm Whoop Frame - Choose Your Version


Axis Flying

Axisflying CineOn C25 V1 Frame Kit

Axisflying

The Axisflying CineOn C25 Frame Kit is meticulously crafted for cinematic purposes, specifically designed for indoor and outdoor shooting with a naked GoPro.

Axisflying CineOn C25 V1 Frame Kit - DJI O3

Axisflying CineOn C20 V1 Frame Kit

The Axisflying CineOn C20 V1 Frame Kit is meticulously crafted for cinematic purposes, specifically designed for indoor and outdoor shooting with a naked GoPro.

Axisflying CineOn C20 V1 Frame Kit - DJI O3

BetaFPV

BetaFPV Pavo35 Cinewhoop 3.5" Micro Frame Kit

BETAFPV

BETAFPV Pavo35 Cinewhoop Frame Kit is the revolutionary framework that the product team has developed after countless hours of applying aerodynamics.

BETAFPV Pavo35 Cinewhoop Frame Kit

Pavo35 cinewhoop frame features newly engineered supports to reduce vibrations as well as being able to accommodate the strong thrust of 6S motors. The ducts are inspired by rocket nozzles to enhance horizontal stability. This frame has aluminum CNC metal supports &amp built-in XT-60 mount. 
Be sure to check out all our 3.5" frames, and the rest of our BetaFPV gear!

Features

The innovative Y-shaped CNC metal support structure can improve the structural strength, torsion resistance, and vibration characteristics of the entire machine compared to aluminum columns, making it respond faster and more smoothly.

Rocket engine-inspired duct design improves lateral stability and increases thrust by 400g compared to without a propeller guard, giving the Pavo35 stronger power and a better flying feel.

The whoop duct is riveted and assembled, and the new appearance and design concept enables more effortless installation and a stronger structure.


Pavo35 Frame Kit
Pavo35 whoop duct can enhance an additional 400g thrust and also a CNC 7075 Aluminum Y shape standoff to eliminate distortion and bending during flight. Powerful and smooth flying is guaranteed. The modular design of the frame guarantees a streamlined appearance, with no protruding wires and the fixed power port design enables effortless one-handed connection. Assembling the frame is a breeze, requiring the simple tightening of the four bottom screws and utilizing the riveting design for convenient detachment of the duct.

The design of the whoop duct fully refers to the aerodynamic principle of the rocket engine nozzle and utilizes different heights and thicknesses between the upper edge and lower edge, through the compression of the inlet air within the duct, a substantial increase in exhaust pressure is achieved. Consequently, an additional thrust of 400g is generated, while simultaneously enhancing the horizontal stability of the cinewhoop. With augmented power and exceptional flight stability, executing challenging maneuvers such as flips and turns on the Pavo35 results in remarkably steady and precise responses. Pilots will experience an enhanced flying sensation.
The Y structural Shape standoff means 8 support force is on the top plate, increasing the structural strength of the quad, which results in smoother turns and minimal vibrations during flight. The CNC standoff is made with aircraft standard material - 7075 Aluminium Alloy to increase strength for ensure that pilots can embark on powerful flights with confidence. Additionally, the duct is securely fastened with only 4 screws, while the remaining connections employ the time-honored Chinese traditional riveting technique to ensure fast assembling and disassembling also including fixed power port design.
Specifications

Item: Pavo35 Brushless Whoop Frame
Wheelbase: 148mm

Top Plate: 3mm T700 carbon fiber

Base Plate: 1.5mm T700 carbon fiber

Gimbal Carbon Plate: 2mm T700 carbon fiber

Column: 7075 aluminum alloy CNC

Battery Holder: 7075 aluminum alloy CNC

Whoop Duct: PC injection-molded translucent gray


Whoop Duct Diameter: 92mm
Battery Connector: Fixed XT60

Camera Installation Size: 20mm (compatible with 19mm)

HD VTX Installation Size: 25.5x25.5mm M1.6/20x20mm M2

HD VTX Antenna Mounting Hole Size: 4mm

Flight controller Mounting Hole Size: 25.5x25.5mm

Motor Mounting Hole Size: 4xM2 EQS ø12mm

Weight: 113.9g

Includes

1x Top Plate
1x Gimbal Carbon Plate

1x Base Plate

2x Battery Tie Holder

4x Y-shaped Aluminum Alloy Bracket

1x Whoop Duct

1x Receiver Holder

1x Amass XT60EW-M Socket (Black)

2x Battery Anti-slip Mat
1x Battery Tie

4x Flight Controller Amping Ball

4x Pan/Tilt Vibration Reduction Ball

4x Pan/Tilt Screws

2x Inner Hex Flat Head Screw M2.5x5

10x Inner Hex Flat Head Screw M2x6

4x Inner Hex Flat Head Screw M2x8

4x Inner Hex Flat Head Screw M2x10

4x Nylon nut M2
1x Accessory package

1x Service Card

1x Frame Manual

 

Pavo35 cinewhoop frame features newly engineered supports to reduce vibrations as well as being able to accommodate the strong thrust of 6S motors. The ducts are inspired by rocket nozzles to enhance horizontal stability. This frame has aluminum CNC metal supports &amp; built-in XT-60 mount.  Be sure to check out all o

Pavo35 cinewhoop frame features newly engineered supports to reduce vibrations as well as being able to accommodate the strong thrust of 6S motors. The ducts are inspired by rocket nozzles to enhance horizontal stability. This frame has aluminum CNC metal supports &ampamp built-in XT-60 mount. 
Be sure to check out all our 3.5&quot frames, and the rest of our BetaFPV gear!

Features

The innovative Y-shaped CNC metal support structure can improve the structural strength, torsion resistance, and vibration characteristics of the entire machine compared to aluminum columns, making it respond faster and more smoothly.

Rocket engine-inspired duct design improves lateral stability and increases thrust by 400g compared to without a propeller guard, giving the Pavo35 stronger power and a better flying feel.

The whoop duct is riveted and assembled, and the new appearance and design concept enables more effortless installation and a stronger structure.


Pavo35 Frame Kit
Pavo35 whoop duct can enhance an additional 400g thrust and also a CNC 7075 Aluminum Y shape standoff to eliminate distortion and bending during flight. Powerful and smooth flying is guaranteed. The modular design of the frame guarantees a streamlined appearance, with no protruding wires and the fixed power port design enables effortless one-handed connection. Assembling the frame is a breeze, requiring the simple tightening of the four bottom screws and utilizing the riveting design for convenient detachment of the duct.

The design of the whoop duct fully refers to the aerodynamic principle of the rocket engine nozzle and utilizes different heights and thicknesses between the upper edge and lower edge, through the compression of the inlet air within the duct, a substantial increase in exhaust pressure is achieved. Consequently, an additional thrust of 400g is generated, while simultaneously enhancing the horizontal stability of the cinewhoop. With augmented power and exceptional flight stability, executing challenging maneuvers such as flips and turns on the Pavo35 results in remarkably steady and precise responses. Pilots will experience an enhanced flying sensation.
The Y structural Shape standoff means 8 support force is on the top plate, increasing the structural strength of the quad, which results in smoother turns and minimal vibrations during flight. The CNC standoff is made with aircraft standard material - 7075 Aluminium Alloy to increase strength for ensure that pilots can embark on powerful flights with confidence. Additionally, the duct is securely fastened with only 4 screws, while the remaining connections employ the time-honored Chinese traditional riveting technique to ensure fast assembling and disassembling also including fixed power port design.
Specifications

Item: Pavo35 Brushless Whoop Frame
Wheelbase: 148mm

Top Plate: 3mm T700 carbon fiber

Base Plate: 1.5mm T700 carbon fiber

Gimbal Carbon Plate: 2mm T700 carbon fiber

Column: 7075 aluminum alloy CNC

Battery Holder: 7075 aluminum alloy CNC

Whoop Duct: PC injection-molded translucent gray


Whoop Duct Diameter: 92mm
Battery Connector: Fixed XT60

Camera Installation Size: 20mm (compatible with 19mm)

HD VTX Installation Size: 25.5x25.5mm M1.6/20x20mm M2

HD VTX Antenna Mounting Hole Size: 4mm

Flight controller Mounting Hole Size: 25.5x25.5mm

Motor Mounting Hole Size: 4xM2 EQS ø12mm

Weight: 113.9g

Includes

1x Top Plate
1x Gimbal Carbon Plate

1x Base Plate

2x Battery Tie Holder

4x Y-shaped Aluminum Alloy Bracket

1x Whoop Duct

1x Receiver Holder

1x Amass XT60EW-M Socket (Black)

2x Battery Anti-slip Mat
1x Battery Tie

4x Flight Controller Amping Ball

4x Pan/Tilt Vibration Reduction Ball

4x Pan/Tilt Screws

2x Inner Hex Flat Head Screw M2.5x5

10x Inner Hex Flat Head Screw M2x6

4x Inner Hex Flat Head Screw M2x8

4x Inner Hex Flat Head Screw M2x10

4x Nylon nut M2
1x Accessory package

1x Service Card

1x Frame Manual

 

BetaFPV Pavo35 Cinewhoop 3.5" Micro Frame Kit from WREKD Co.

BetaFPV Pavo35 Cinewhoop 3.5

NewBeeDrone

NewBeeDrone M-323 DC 7" Frame

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame
Design Idea: 



Simplicity in Construction: Designed for effortless assembly and minimal maintenance.

Versatile Hardware Mounting Solutions: Offers flexibility in mounting configurations, allowing for personalized setups tailored to your needs.

Strategic Tactic Mounting Points: Featuring mounting points on both top and bottom plates, enabling users to securely fasten any accessory using straps.

Innovative Motor Arm Protection: Inspired by the Air Max concept, our motor arm protectors are crafted with a lightweight, hollow design, using durable TPU material. This not only reduces weight but also offers enhanced protection for the arm edges and motor. The snap-on installation eliminates the need for screws, ensuring the motor remains firmly attached to the frame, optimizing system performance.


Spec:

FC Mount: 20X20, 25.5X25.5, 30.5X30.5 mm
VTX Mount: 20X20 
Camera Mount: 19mm wide
Motor Mount:19x19 M3 screw mount 

 
What's include: Carbon Fiber Parts:

Top plate 2mm x1

Mid plate 2.5mm x1
 Bottom plate 2.5m x1
Front arm 6mm x2
Rear arm 6mm x2

3D Printed Parts:

Motor arm protector TPU 
TBS Crossfire nano receiver mount TPU
VTX Antenna Mount (two antenna) TPU
FPV Camera mount TPU

Hardware:

 M3  High Tensile Carbon Steel 8mm x13
M3 High Tensile Carbon Steel 10mm x18
M3 High Tensile Carbon Steel 14mm x9
M3 High Tensile Carbon Steel 16mm x5
M3 High Tensile Carbon Steel 25mm x5
M3 Nylon Lock Nut x9
 M3  7075 Aluminum Standoff 28mm x9

Accessory:

PU Battery mount sticker x1
Strap 20mm x 300mm x3
Nylon Zipties 3*100mm x5


 

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame Design Idea:  Simplicity in Construction: Designed for effortless assembly and minimal maintenance. Versatile Hardware Mounting Solutions: Offers flexibility in mounting configurations, allowing for personalized setups tailored to your needs. Strategic Tactic Mounting Poi

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame
Design Idea: 



Simplicity in Construction: Designed for effortless assembly and minimal maintenance.

Versatile Hardware Mounting Solutions: Offers flexibility in mounting configurations, allowing for personalized setups tailored to your needs.

Strategic Tactic Mounting Points: Featuring mounting points on both top and bottom plates, enabling users to securely fasten any accessory using straps.

Innovative Motor Arm Protection: Inspired by the Air Max concept, our motor arm protectors are crafted with a lightweight, hollow design, using durable TPU material. This not only reduces weight but also offers enhanced protection for the arm edges and motor. The snap-on installation eliminates the need for screws, ensuring the motor remains firmly attached to the frame, optimizing system performance.


Spec:

FC Mount: 20X20, 25.5X25.5, 30.5X30.5 mm
VTX Mount: 20X20 
Camera Mount: 19mm wide
Motor Mount:19x19 M3 screw mount 

 
What&#39s include: Carbon Fiber Parts:

Top plate 2mm x1

Mid plate 2.5mm x1
 Bottom plate 2.5m x1
Front arm 6mm x2
Rear arm 6mm x2

3D Printed Parts:

Motor arm protector TPU 
TBS Crossfire nano receiver mount TPU
VTX Antenna Mount (two antenna) TPU
FPV Camera mount TPU

Hardware:

 M3  High Tensile Carbon Steel 8mm x13
M3 High Tensile Carbon Steel 10mm x18
M3 High Tensile Carbon Steel 14mm x9
M3 High Tensile Carbon Steel 16mm x5
M3 High Tensile Carbon Steel 25mm x5
M3 Nylon Lock Nut x9
 M3  7075 Aluminum Standoff 28mm x9

Accessory:

PU Battery mount sticker x1
Strap 20mm x 300mm x3
Nylon Zipties 3*100mm x5


 

NewBeeDrone M-323 7inch DC (Dead Cat) FPV Frame from WREKD Co.

Luma Quad

Luma Quads Luma 25 Cinewhoop 2.5" Frame Kit

Luma Quads












The Luma 25 Frame Kit from Luma Quads is designed for Naked GoPro applications. This modern-designed frame features symmetrical top and bottom plates, where you can be built as a pusher or puller quad. You&#39ll love how light and easy to assemble this kit is, at only 240.5g with a Naked GoPro, Vista, and a 450mah 4S pack, or 208g with an Air unit O3 and no GoPro! A solid frame for those looking to create a 2.5&quot Cinewhoop! This version comes with black ducts and blue tpu.











Check out our selection of micro frames as well as our Luma Quads Products!
Features

Symmetrically designed to be built in either Standard or Pusher configurations.  
O3 Air Unit, Mini, Micro and Nano FPV camera options included.

HD Vista/Air Unit 03 / Analog compatible.
Slammed 15mm stack height.

Sub 250g AUW (inc Naked GP and 4S 450mah).

Support for 2.5&quot propellers. 
Front Standard GoPro mount (suits any GoPro style camera mount)

Download the 3D model .stl files for this kit here.






Kit includes DJI Air Unit O3 Mounts




Specifications

Stack Mounting: 20x20mm and 25.5x25.5mm

Rear Mounting: 20x20mm and 25.5x25.5mm
Motor Mount Pattern: 9x9mm

Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Motor to Motor: 129mm 

Frame Weight: 62g 


Includes

1x Luma Quads Luma 25 Cinewhoop 2.5&quot Micro Frame Kit

LUMA 25 FRAME ASSEMBLY GUIDE. V1.0





Kit contents:
HARDWARE BAG BREAKDOWN:





Bag A - MAIN
Quantity




M2 8mm Bolt

4x


M2 15mm Standoff
4x








Bag B - STACK




M2 14mm Bolt
4x




M2 Plastic Nut

4x






Bag C - REAR STACK





M2 20mm Bolt

4x




M2 Steel Nut

4x






Bag D - MOTORS





M2 6mm
16x








Bag E - HD MOUNT




M2 8mm Bolt
5x


M2 Steel Nut
5x


M2 Steel Washer 
5x


M3 16mm Bolt
1x


M3 Steel Nut
1x


M3 Steel Washer
4x










CARBON PARTS.




2mm Top-plate
1x


2.5mm Bottom-plate
1x




3D PRINTED PARTS.





Front FPV Camera mounts
2x


Front GoPro Hard-mount
1x


Rear Immortal T &ampamp Vista Antenna Mount
1x


25.5x25.5 Stack RX Mount
1x


Rear 20x20 Analog RX/VTX Mount






Plastic Parts.




 2.5&quot Prop Guards
5x




Extras.





Zipties
4x


130mm x 12mm Battery strap.
1x






Assembly guide.
The Luma 25 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 25 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M3 Steel washer into the GPLite mount as shown.

Insert 2x Washers into the HD Cam Mount.

Align GPLite mount up with HD Mount, Insert M3 Nut into HD Mount.

Insert M3 16mm Bolt through M3 washer into HD Mount and secure with M3 nut.

Insert 4x M2 8mm Bolts through 4x M2 Washers.

Insert M2 Bolts and Washers through HD Cam Mount.

Install HD mount assembly onto Top Plate.

Secure HD Mount to Top plate using 4x M2 Steel nuts.

2) Main Frame.
 Insert 4x 14mm M2 standoffs into TPU Front camera and Rear antenna mount.

Align with bottom plate.

Insert 8x 8mm Bolts through the Top and Bottom plates into the standoffs.

3) Prop Guards
Align and orientate the prop guards as shown.

Secure using the included 6mm Motor screws through the bottom plate through the guard into the base of the motor.
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties. 
5) Other
The included 25.5x25,5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted Analog VTX/RX. 

IMPORTANT:Do not let electrical components come in contact with the carbon, use spacers that came with your with FC stack and the included RX/VTX Mounts to space your components away from carbon.  






The Luma 25 Frame Kit from Luma Quads is designed for Naked GoPro applications. This modern-designed frame features symmetrical top and bottom plates, where you can be built as a pusher or puller quad. You'll love how light and easy to assemble this kit is, at only 240.5g with a Naked GoPro, Vista, and a 450mah 4S pack

Luma Quads Luma 25 Cinewhoop 2.5" Micro Frame Kit from WREKD Co.

Luma Quads Luma 25 Cinewhoop 2.5

Luma Quads Luma 25 Cinewhoop 2.5" Micro Frame Kit












The Luma 25 Frame Kit from Luma Quads is designed for Naked GoPro applications. This modern-designed frame features symmetrical top and bottom plates, where you can be built as a pusher or puller quad. You'll love how light and easy to assemble this kit is, at only 240.5g with a Naked GoPro, Vista, and a 450mah 4S pack, or 208g with an Air unit O3 and no GoPro! A solid frame for those looking to create a 2.5" Cinewhoop! This version comes with black ducts and blue tpu.











Check out our selection of micro frames as well as our Luma Quads Products!
Features

Symmetrically designed to be built in either Standard or Pusher configurations.  
O3 Air Unit, Mini, Micro and Nano FPV camera options included.

HD Vista/Air Unit 03 / Analog compatible.
Slammed 15mm stack height.

Sub 250g AUW (inc Naked GP and 4S 450mah).

Support for 2.5" propellers. 
Front Standard GoPro mount (suits any GoPro style camera mount)

Download the 3D model .stl files for this kit here.






Kit includes DJI Air Unit O3 Mounts




Specifications

Stack Mounting: 20x20mm and 25.5x25.5mm

Rear Mounting: 20x20mm and 25.5x25.5mm
Motor Mount Pattern: 9x9mm

Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Motor to Motor: 129mm 

Frame Weight: 62g 


Includes

1x Luma Quads Luma 25 Cinewhoop 2.5" Micro Frame Kit

LUMA 25 FRAME ASSEMBLY GUIDE. V1.0





Kit contents:
HARDWARE BAG BREAKDOWN:





Bag A - MAIN
Quantity




M2 8mm Bolt

4x


M2 15mm Standoff
4x








Bag B - STACK




M2 14mm Bolt
4x




M2 Plastic Nut

4x






Bag C - REAR STACK





M2 20mm Bolt

4x




M2 Steel Nut

4x






Bag D - MOTORS





M2 6mm
16x








Bag E - HD MOUNT




M2 8mm Bolt
5x


M2 Steel Nut
5x


M2 Steel Washer 
5x


M3 16mm Bolt
1x


M3 Steel Nut
1x


M3 Steel Washer
4x










CARBON PARTS.




2mm Top-plate
1x


2.5mm Bottom-plate
1x




3D PRINTED PARTS.





Front FPV Camera mounts
2x


Front GoPro Hard-mount
1x


Rear Immortal T &amp Vista Antenna Mount
1x


25.5x25.5 Stack RX Mount
1x


Rear 20x20 Analog RX/VTX Mount






Plastic Parts.




 2.5" Prop Guards
5x




Extras.





Zipties
4x


130mm x 12mm Battery strap.
1x






Assembly guide.
The Luma 25 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 25 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M3 Steel washer into the GPLite mount as shown.

Insert 2x Washers into the HD Cam Mount.

Align GPLite mount up with HD Mount, Insert M3 Nut into HD Mount.

Insert M3 16mm Bolt through M3 washer into HD Mount and secure with M3 nut.

Insert 4x M2 8mm Bolts through 4x M2 Washers.

Insert M2 Bolts and Washers through HD Cam Mount.

Install HD mount assembly onto Top Plate.

Secure HD Mount to Top plate using 4x M2 Steel nuts.

2) Main Frame.
 Insert 4x 14mm M2 standoffs into TPU Front camera and Rear antenna mount.

Align with bottom plate.

Insert 8x 8mm Bolts through the Top and Bottom plates into the standoffs.

3) Prop Guards
Align and orientate the prop guards as shown.

Secure using the included 6mm Motor screws through the bottom plate through the guard into the base of the motor.
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties. 
5) Other
The included 25.5x25,5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted Analog VTX/RX. 

IMPORTANT:Do not let electrical components come in contact with the carbon, use spacers that came with your with FC stack and the included RX/VTX Mounts to space your components away from carbon.  






Luma Quads Luma 30 Cinewhoop 3" Frame Kit












The Luma 30 is an ultra-lightweight and super high-performance 3" cinewhoop that can be powered by the same 6S setup as its predecessor, the Luma 3, while still being able to carry a full-size GoPro. It has the same symmetrical bolt patterns on its top and bottom plates that allow it to be built in "puller" or "pusher" configurations, plus a 15mm slammed deck height for a low center of gravity and room for O3 Air Unit, Vista or analog VTX. Weighing just 85g (Frame hardware and prints) and 238g when fully built (without Gopro), it offers longer flight times and improved maneuverability over other 3" whoops. The only drawback is the durability of the injection-molded guards, which will break if you hit anything hard. To make sure customers are satisfied, they have included five guards in each kit. This version comes with black ducts and blue tpu.
Check out our selection of 3" Frame Kits as well as our Luma Quads Products!











Features

HD Vista / analog compatible.
Slammed 15mm stack height.
Both Mini, Micro, and Nano FPV camera mounts are included - supporting all FPV cameras from 20-14mm.
Support for all 3" propellers.
Front Standard GoPro mount (suits any GoPro mounting style camera)
Symmetrically designed to be built in either "Puller" or "Pusher" configurations.  
Both SMA and Vista/ Airunit 03 Rear mount with VTX antenna and Immortal T Style Antenna Mount included.
Download the 3d model .stl files for this kit here.

Come on, can any other 3" Cinewhoop do moves like this?

 
The Ideal setup

  Specifications

Stack Mounting: 20x20mm and 25.5x25.5mm

Rear Mounting: 20x20mm 
Motor Mount Pattern: 12x12mm M2 &amp 16x16mm M3

Top Plate Thickness: 2mm
Bottom Plate Thickness: 2.5mm
Motor to Motor: 157.5mm

Frame Weight: 85g  (238g built with no battery or HD cam)


Includes

1x Luma Quads Luma 30 Cinewhoop 3" Micro Frame Kit - Black


LUMA 30 FRAME ASSEMBLY GUIDE. V1.0



Kit contents:
HARDWARE BAG BREAKDOWN:





Bag A - MAIN
Quantity




M2 8mm Bolt

12x


M2 15mm Standoff
6x








Bag B - STACK




M2 14mm Bolt
4x




M2 Plastic Nut

4x






Bag C - REAR STACK





M2 18mm Bolt

4x




M2 Steel Nut

4x






Bag D - MOTORS





M2 10mm Bolt
16x


M2 Washer
16x








Bag E - HD MOUNT




M2 8mm Bolt
2x


M2 10mm Bolt
2x


M2 Steel Nut
4x


M2 Steel Washer 
4x


M5 Steel Nut
1x










CARBON PARTS.




2mm Top-plate
1x


2.5mm Bottom-plate
1x





3D PRINTED PARTS.





Front FPV Camera mounts
2x


Front GoPro Hard-mount
1x


Rear Immortal T &amp Vista Antenna Mount
1x


Rear Immortal T &amp SMA Antenna Mount
1x


25.5x25.5 Stack RX Mount
1x


Rear 20x20 Analog RX/VTX Mount
1x






Plastic Parts.




3" Prop Guards
6x




Extras.





Zipties
4x


Luma 250mm Lipo Strap.
2x






Assembly guide.
The Luma 30 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 30 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M5 Steel Nut into the GP mount as shown.


 
Secure the Gopro mount to the top plate using 2x 8mm M2 bolts washers and steel nuts through the front 2 holes of the mount.



2) Main Frame.
Install 6x 15mm Standoff onto bottom plate.

 
Secure with 6x 8mm M2 bolts from below.
 
 
Insert front FPV camera mounts over front 2 standoffs. 
 
Insert Rear antenna mount over rear 2 standoffs.

Align top plate over the standoffs

Secure with 4x 8mm M2 bolts

Insert 2 more 8mm bolts with M2 washers through the back 2 holes on the GoPro mount into the middle two standoffs.
 
3) Prop Guards and bumpers
Align and orientate the prop guards as shown.


 
Secure the guards and bumpers using 16x 10mm M2 bolts and M2 washers. 
These are screwed through the bumpers, carbon plate and guards into the base of the motors.
NOTE: M2 BOLTS HAVE SKINNY CAPHEADSDO NOT FORGET TO INSTALL THE WASHERS!DEPENDING ON WHAT MOTORS YOU RUN IT MAY BE NESSASARY TO EXPAND THE CENTER HOLE IN THE GUARDSBY A FRACTION OF A MM TO ALLOW THE BASE SCREW TO SPIN FREELY.
BE SURE NOT TO LET THE MOTOR BOLTS TOUCH THE WINDINGS OF THE MOTORS 
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties. 
5) Other
The included 25.5x25.5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted Analog VTX/RX. 

IMPORTANT:Do not let electrical components come in contact with the carbon, use spacers that came with your with FC stack and the included RX/VTX Mounts to space your components away from carbon.  




The Luma 30 is an ultra-lightweight and super high-performance 3" cinewhoop that can be powered by the same 6S setup as its predecessor, the Luma 3, while still being able to carry a full-size GoPro. It has the same symmetrical bolt patterns on its top and bottom plates that allow it to be built in "puller" or "pusher"

Luma Quads Luma 30 Cinewhoop 3" Micro Frame Kit












The Luma 30 is an ultra-lightweight and super high-performance 3&quot cinewhoop that can be powered by the same 6S setup as its predecessor, the Luma 3, while still being able to carry a full-size GoPro. It has the same symmetrical bolt patterns on its top and bottom plates that allow it to be built in &quotpuller&quot or &quotpusher&quot configurations, plus a 15mm slammed deck height for a low center of gravity and room for O3 Air Unit, Vista or analog VTX. Weighing just 85g (Frame hardware and prints) and 238g when fully built (without Gopro), it offers longer flight times and improved maneuverability over other 3&quot whoops. The only drawback is the durability of the injection-molded guards, which will break if you hit anything hard. To make sure customers are satisfied, they have included five guards in each kit. This version comes with black ducts and blue tpu.
Check out our selection of 3&quot Frame Kits as well as our Luma Quads Products!











Features

HD Vista / analog compatible.
Slammed 15mm stack height.
Both Mini, Micro, and Nano FPV camera mounts are included - supporting all FPV cameras from 20-14mm.
Support for all 3&quot propellers.
Front Standard GoPro mount (suits any GoPro mounting style camera)
Symmetrically designed to be built in either &quotPuller&quot or &quotPusher&quot configurations.  
Both SMA and Vista/ Airunit 03 Rear mount with VTX antenna and Immortal T Style Antenna Mount included.
Download the 3d model .stl files for this kit here.

Come on, can any other 3&quot Cinewhoop do moves like this?

 
The Ideal setup

  Specifications

Stack Mounting: 20x20mm and 25.5x25.5mm

Rear Mounting: 20x20mm 
Motor Mount Pattern: 12x12mm M2 &ampamp 16x16mm M3

Top Plate Thickness: 2mm
Bottom Plate Thickness: 2.5mm
Motor to Motor: 157.5mm

Frame Weight: 85g  (238g built with no battery or HD cam)


Includes

1x Luma Quads Luma 30 Cinewhoop 3&quot Micro Frame Kit - Black


LUMA 30 FRAME ASSEMBLY GUIDE. V1.0



Kit contents:
HARDWARE BAG BREAKDOWN:





Bag A - MAIN
Quantity




M2 8mm Bolt

12x


M2 15mm Standoff
6x








Bag B - STACK




M2 14mm Bolt
4x




M2 Plastic Nut

4x






Bag C - REAR STACK





M2 18mm Bolt

4x




M2 Steel Nut

4x






Bag D - MOTORS





M2 10mm Bolt
16x


M2 Washer
16x








Bag E - HD MOUNT




M2 8mm Bolt
2x


M2 10mm Bolt
2x


M2 Steel Nut
4x


M2 Steel Washer 
4x


M5 Steel Nut
1x










CARBON PARTS.




2mm Top-plate
1x


2.5mm Bottom-plate
1x





3D PRINTED PARTS.





Front FPV Camera mounts
2x


Front GoPro Hard-mount
1x


Rear Immortal T &ampamp Vista Antenna Mount
1x


Rear Immortal T &ampamp SMA Antenna Mount
1x


25.5x25.5 Stack RX Mount
1x


Rear 20x20 Analog RX/VTX Mount
1x






Plastic Parts.




3&quot Prop Guards
6x




Extras.





Zipties
4x


Luma 250mm Lipo Strap.
2x






Assembly guide.
The Luma 30 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 30 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M5 Steel Nut into the GP mount as shown.


 
Secure the Gopro mount to the top plate using 2x 8mm M2 bolts washers and steel nuts through the front 2 holes of the mount.



2) Main Frame.
Install 6x 15mm Standoff onto bottom plate.

 
Secure with 6x 8mm M2 bolts from below.
 
 
Insert front FPV camera mounts over front 2 standoffs. 
 
Insert Rear antenna mount over rear 2 standoffs.

Align top plate over the standoffs

Secure with 4x 8mm M2 bolts

Insert 2 more 8mm bolts with M2 washers through the back 2 holes on the GoPro mount into the middle two standoffs.
 
3) Prop Guards and bumpers
Align and orientate the prop guards as shown.


 
Secure the guards and bumpers using 16x 10mm M2 bolts and M2 washers. 
These are screwed through the bumpers, carbon plate and guards into the base of the motors.
NOTE: M2 BOLTS HAVE SKINNY CAPHEADSDO NOT FORGET TO INSTALL THE WASHERS!DEPENDING ON WHAT MOTORS YOU RUN IT MAY BE NESSASARY TO EXPAND THE CENTER HOLE IN THE GUARDSBY A FRACTION OF A MM TO ALLOW THE BASE SCREW TO SPIN FREELY.
BE SURE NOT TO LET THE MOTOR BOLTS TOUCH THE WINDINGS OF THE MOTORS 
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties. 
5) Other
The included 25.5x25.5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted..

Luma Quads Luma 30 Cinewhoop 3" Micro Frame Kit from WREKD Co.

Luma Quads Luma 30 Cinewhoop 3

BetaFPV Pavo Pico HD 81mm Cinewhoop Frame












Pavo Pico is the tiniest 2S Sub100g DJI O3 Cinewhoop frame, working with other popular HD digital VTX such as Walksnail Avatar Pro Kit, Vista Kit, etc. After testing with pilots, this frame has been upgraded by lowering the battery slot height and adding filters and camera protection parts. These updates enhance the camera and HD digital VTX, to give pilots an unparalleled flying experience.
The Pavo Pico is an all-new HD 81mm cinewhoop with 45mm props that is designed to be the smallest 2S-3S, sub100g build.











Check out the rest of our micro frames and the rest of our BetaFPV gear!


Features


HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.

Incorporating an angle-limited lens protection print and DJI O3 series filters, It is recommended to purchase, which can increase safety and improve visual quality.
The Rubber Damper Vibration damping design reduces low-frequency vibrations and is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods. Additionally, larger batteries can be installed by using battery straps or printed components.
The DJI O3 can be directly installed, while Avatar and Vista require a 20x20 mounting plate and screws (included) for fixation. The naked frame is suitable for users who DIY refit and assemble the HD VTX by themselves.
We offer a wider range of colors for the Pavo Pico frames, giving you even more options to choose from. Whether you prefer a bold and bright hue or a more subdued shade, we have a color that will suit your style. You can choose your favorite color or collect them all to create your own unique mix-and-match cinewhoop.




Pavo Pico Frame Kit

We used ultra-light PP material to make the HD VTX mounting bracket, increasing its toughness. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera's installation height has been lowered with a protective printed part to limit its movable angle to within 30°. Additionally, an O3 filter can be used to protect the lens and enhance image quality. We have incorporated a unique rubber damper vibration-damping design, used with GyroFlow stabilization software, which greatly enhances safety and ensures a smooth, HD image output. When you screw the die-cast screws, please DO NOT screw them too tight to leave room for rubber dampers to absorb vibration. It may cause jello in the video footage.
Click to watch the installation guide video for DJI O3 Air Unit on Pavo Pico.

And The whoop quadcopter package includes the DJI O3 HD Digital VTX Antenna Mount.

DJI O3 Vibration Problem
To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.

Troubleshooting
To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball.
The Jello effect may occur during the above installation due to 2 reasons:



The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose.
If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary.


Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller's rotation.
Upgrade Low Profile Design
After collecting feedback through the BETA TEST, we lowered the height of the HD VTX mounting bracket and whoop duct from 60.6mm to 51.5mm and the battery compartment results in a more low profile on the cinewhoop. 

Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components, allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow:

Specification

Item: Pavo Pico Brushless Whoop Frame
Material: PA12
Wheelbase: 80.8mm
Battery Slot Size: 16mmx12.7mm
Camera Installation Spacing: 19mm/20mm
Color: Black
Weight: 11.62g
Motor Mounting Hole Position: 3-M1.4-φ6.6mm
FC Pattern: 26×26mm, suitable for F4 1S 12A AIO Brushless FC V3

Includes

1x BetaFPV Pavo Pico HD 81mm  Cinewhoop Frame (HD Digital Version) - Black


Pavo Pico is the tiniest 2S Sub100g DJI O3 Cinewhoop frame, working with other popular HD digital VTX such as Walksnail Avatar Pro Kit, Vista Kit, etc. After testing with pilots, this frame has been upgraded by lowering the battery slot height and adding filters and camera protection parts. These updates enhance the ca

BetaFPV Pavo Pico HD 81mm  Cinewhoop Frame (HD Digital Version) - Black

BetaFPV Pavo Pico HD 81mm Cinewhoop Frame (HD Digital Version) - Black












Pavo Pico is the tiniest 2S Sub100g DJI O3 Cinewhoop frame, working with other popular HD digital VTX such as Walksnail Avatar Pro Kit, Vista Kit, etc. After testing with pilots, this frame has been upgraded by lowering the battery slot height and adding filters and camera protection parts. These updates enhance the camera and HD digital VTX, to give pilots an unparalleled flying experience.
The Pavo Pico is an all-new HD 81mm cinewhoop with 45mm props that is designed to be the smallest 2S-3S, sub100g build.











Check out the rest of our micro frames and the rest of our BetaFPV gear!


Features


HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.

Incorporating an angle-limited lens protection print and DJI O3 series filters, It is recommended to purchase, which can increase safety and improve visual quality.
The Rubber Damper Vibration damping design reduces low-frequency vibrations and is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods. Additionally, larger batteries can be installed by using battery straps or printed components.
The DJI O3 can be directly installed, while Avatar and Vista require a 20x20 mounting plate and screws (included) for fixation. The naked frame is suitable for users who DIY refit and assemble the HD VTX by themselves.
We offer a wider range of colors for the Pavo Pico frames, giving you even more options to choose from. Whether you prefer a bold and bright hue or a more subdued shade, we have a color that will suit your style. You can choose your favorite color or collect them all to create your own unique mix-and-match cinewhoop.




Pavo Pico Frame Kit

We used ultra-light PP material to make the HD VTX mounting bracket, increasing its toughness. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera&#39s installation height has been lowered with a protective printed part to limit its movable angle to within 30°. Additionally, an O3 filter can be used to protect the lens and enhance image quality. We have incorporated a unique rubber damper vibration-damping design, used with GyroFlow stabilization software, which greatly enhances safety and ensures a smooth, HD image output. When you screw the die-cast screws, please DO NOT screw them too tight to leave room for rubber dampers to absorb vibration. It may cause jello in the video footage.
Click to watch the installation guide video for DJI O3 Air Unit on Pavo Pico.

And The whoop quadcopter package includes the DJI O3 HD Digital VTX Antenna Mount.

DJI O3 Vibration Problem
To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.

Troubleshooting
To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball.
The Jello effect may occur during the above installation due to 2 reasons:



The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose.
If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary.


Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller&#39s rotation.
Upgrade Low Profile Design
After collecting feedback through the BETA TEST, we lowered the height of the HD VTX mounting bracket and whoop duct from 60.6mm to 51.5mm and the battery compartment results in a more low profile on the cinewhoop. 

Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components, allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow:

Specification

Item: Pavo Pico Brushless Whoop Frame
Material: PA12
Wheelbase: 80.8mm
Battery Slot Size: 16mmx12.7mm
Camera Installation Spacing: 19mm/20mm
Color: Black
Weight: 11.62g
Motor Mounting Hole Position: 3-M1.4-φ6.6mm
FC Pattern: 26×26mm, suitable for F4 1S 12A AIO Brushless FC V3

Includes

1x BetaFPV Pavo Pico HD 81mm  Cinewhoop Frame (HD Digital Version) - Black


BetaFPV Pavo Pico HD 81mm  Cinewhoop Frame (HD Digital Version) - Black from WREKD Co.

SpeedyBee

SpeedyBee Bee35 Pro 3.5" Micro Frame Kit - LED Version

The brand-new Bee35 Pro - Now available with customizable LED light strip!
The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones. Durable, effective, and resilient, the frame kit is great for both beginners and veterans with its tough prop guards that can survive rough handling.
Looking for the non-pro version, check out the SpeedyBee Bee35! 
Be sure to check out all our 3.5&quot frames, and all our Speedy Bee products!
Features

Custom-made aluminum alloy head to protect the O3 effectively without obstruction.
Customized silicone shock absorption O3 lens, eliminates the &#39jelly&#39 effect.
Custom-designed bottom aluminum alloy for heat dissipation, integrating seamlessly with O3 and RunCam Link. Includes a convenient Type-C port and memory card slot for easy frequency tuning.
Compatibility with 20x20mm, 25x25mm, and 30.5x30.5mm stacks.
Battery support featuring both horizontal and vertical binding designs for enhanced durability and easy installation.
Connects to the flight controller without disassembling the drone, supporting both Type-C and micro interfaces.
Ultra-strong injection-molded protective ring with a cutout for simple LED light strip installation.
A comprehensive set of printed parts: GoPro mount / 121GPS mount / multifunctional antenna mount / T-shaped antenna mount.
Adjustable GPS mount for MASTER 5 V2 GPS, including a standard 121GPS mount.
Option for a detachable shock-absorbing gimbal (sold separately).

Quick Release Solution
Only 6 screws are to be removed for freeing drone body and propeller guard.



Aerospace-grade Aluminum Front Plate
The aviation-grade aluminum headpiece provides excellent protection for the lens, and it is embedded with custom silicone damping material, resulting in effective anti-vibration performance for the lens. The GyroFlow effect is enhanced for better stability.

100% efficient heat dissipation
We have found that the O3 video transmitter shuts down due to high CPU temperatures during prolonged high-temperature operation. To address this issue, we have specially designed a 7075-T aerospace-grade aluminum component for the O3 video transmitter, doubling its heat dissipation efficiency! Additionally, it features 20x20 mounting screw holes, making it compatible with Link, TX800, and other 20-hole video transmitters.
Note: The test data is conducted at an ambient temperature of 26 degrees Celsius. The actual performance may vary depending on the temperature of the usage environment.

Custom-made aerospace-grade aluminum components
Specially designed to solve the TF card insertion issue of O3 without disassembly. Easily insert the card without any hassle. It also features a dedicated frequency position for O3 and Link video transmitters, making it super convenient for Type-C connection!

H-FOV135°
135° wide-angle without dark corners.

Two battery installation methods
Super convenient battery strap design allows for horizontal or vertical battery mounting.





Super durable injection-molded ring
Made of high-strength imported composite material with built-in LED strip mounting groove.
Compatible with Meteor LED
Offers seven preset basic effects and allows for wireless customization of your personal lighting styles through the app.
 

 

Compatible with flight towers
Supports installation of various flight towers and AIO (All-In-One) boards in sizes of 20x20, 25.5x25.5 (45° 90°), and 30.5x30.520-hole MINI flight tower —— Recommended (Perfect fit)25.5-hole AIO flight controller —— Recommended (Perfect fit)30.5-hole standard flight tower —— Not recommended (Installation is compact and requires some hands-on skills)






Multi-function antenna mount
Type-C adapter cable directly plugs into the flight controller without disassembling the aircraft.






Specifications

Wheelbase: 153mm
Top Plate Thickness: 3.5mm
Bottom Plate Thickness: 2mm
Camera Mounting Distance: 19/20mm
ESC/Motor Mounting Height: 24mm
Flight Stack Mounting Holes: 20x20/25.5x25.5/30.5x30.5mm
Video Transmitter Mounting Holes: 20x20/25.5x25.5
Propeller Size: 90mm
Motor Mounting Holes: 12x12mm
Weight: 138g
CNC Heat Sink: 15g
Camera Gimbal: 28g
Recommended Motor: 1806/2004/2006
Recommended KV: 4S/2500-3500KV, 6S/1800-2300KV
Recommended Battery: 900-1500mAh 4S/6S

Includes

1x SpeedyBee Bee35 Pro 3.5&quot Frame - LED Version



The brand-new Bee35 Pro - Now available with customizable LED light strip! The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones. Durable, effective, and resilient, the 

SpeedyBee Bee35 Pro 3.5" Micro Frame - LED Version from WREKD Co.

SpeedyBee Bee35 Pro 3.5

SpeedyBee Bee35 Pro 3.5" Micro Frame - LED Version

RUNCAM

The brand-new Bee35 Pro - Now available with customizable LED light strip!
The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones. Durable, effective, and resilient, the frame kit is great for both beginners and veterans with its tough prop guards that can survive rough handling.
Looking for the non-pro version, check out the SpeedyBee Bee35! 
Be sure to check out all our 3.5" frames, and all our Speedy Bee products!
Features

Custom-made aluminum alloy head to protect the O3 effectively without obstruction.
Customized silicone shock absorption O3 lens, eliminates the 'jelly' effect.
Custom-designed bottom aluminum alloy for heat dissipation, integrating seamlessly with O3 and RunCam Link. Includes a convenient Type-C port and memory card slot for easy frequency tuning.
Compatibility with 20x20mm, 25x25mm, and 30.5x30.5mm stacks.
Battery support featuring both horizontal and vertical binding designs for enhanced durability and easy installation.
Connects to the flight controller without disassembling the drone, supporting both Type-C and micro interfaces.
Ultra-strong injection-molded protective ring with a cutout for simple LED light strip installation.
A comprehensive set of printed parts: GoPro mount / 121GPS mount / multifunctional antenna mount / T-shaped antenna mount.
Adjustable GPS mount for MASTER 5 V2 GPS, including a standard 121GPS mount.
Option for a detachable shock-absorbing gimbal (sold separately).

Quick Release Solution
Only 6 screws are to be removed for freeing drone body and propeller guard.



Aerospace-grade Aluminum Front Plate
The aviation-grade aluminum headpiece provides excellent protection for the lens, and it is embedded with custom silicone damping material, resulting in effective anti-vibration performance for the lens. The GyroFlow effect is enhanced for better stability.

100% efficient heat dissipation
We have found that the O3 video transmitter shuts down due to high CPU temperatures during prolonged high-temperature operation. To address this issue, we have specially designed a 7075-T aerospace-grade aluminum component for the O3 video transmitter, doubling its heat dissipation efficiency! Additionally, it features 20x20 mounting screw holes, making it compatible with Link, TX800, and other 20-hole video transmitters.
Note: The test data is conducted at an ambient temperature of 26 degrees Celsius. The actual performance may vary depending on the temperature of the usage environment.

Custom-made aerospace-grade aluminum components
Specially designed to solve the TF card insertion issue of O3 without disassembly. Easily insert the card without any hassle. It also features a dedicated frequency position for O3 and Link video transmitters, making it super convenient for Type-C connection!

H-FOV135°
135° wide-angle without dark corners.

Two battery installation methods
Super convenient battery strap design allows for horizontal or vertical battery mounting.





Super durable injection-molded ring
Made of high-strength imported composite material with built-in LED strip mounting groove.
Compatible with Meteor LED
Offers seven preset basic effects and allows for wireless customization of your personal lighting styles through the app.
 

 

Compatible with flight towers
Supports installation of various flight towers and AIO (All-In-One) boards in sizes of 20x20, 25.5x25.5 (45° 90°), and 30.5x30.520-hole MINI flight tower —— Recommended (Perfect fit)25.5-hole AIO flight controller —— Recommended (Perfect fit)30.5-hole standard flight tower —— Not recommended (Installation is compact and requires some hands-on skills)






Multi-function antenna mount
Type-C adapter cable directly plugs into the flight controller without disassembling the aircraft.






Specifications

Wheelbase: 153mm
Top Plate Thickness: 3.5mm
Bottom Plate Thickness: 2mm
Camera Mounting Distance: 19/20mm
ESC/Motor Mounting Height: 24mm
Flight Stack Mounting Holes: 20x20/25.5x25.5/30.5x30.5mm
Video Transmitter Mounting Holes: 20x20/25.5x25.5
Propeller Size: 90mm
Motor Mounting Holes: 12x12mm
Weight: 138g
CNC Heat Sink: 15g
Camera Gimbal: 28g
Recommended Motor: 1806/2004/2006
Recommended KV: 4S/2500-3500KV, 6S/1800-2300KV
Recommended Battery: 900-1500mAh 4S/6S

Includes

1x SpeedyBee Bee35 Pro 3.5" Frame - LED Version



SpeedyBee Bee35 3.5" Cinewhoop Frame Kit

The brand-new Bee35 FPV drone offers robust power,crash-resistant protective frames, and exceptional battery life.
The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones. Durable, effective, and resilient, the frame kit is great for both beginners and veterans with its tough prop guards that can survive rough handling.
Choose between Bee35 or the Bee35 Pro, where with the Pro version, you get an advanced heat sink for your VTX.
Be sure to check out all our 3.5" frames, and all our Speedy Bee products!
Features

Customized aluminum alloy front end to effectively protect unobstructed O3.

Customized silicone gel shock absorption for the O3 lens, eliminating jello effect.

Customized aluminum alloy heat dissipation device at the bottom, seamlessly
Integrated with O3 and runcam link transmission, while also facilitating type-c and memory card insertion for convenient adjustments.
Flight tower compatibility: Hole patterns for 2020mm/25.5x25.5mm/30.5x30.5mm.

Adjustable GPS mount compatible with both GPS and MASTER 5 V2 GPS mounts, with 121GPS mount included standard.

Supports detachable shock-absorbing gimbal.

H-FOV 135° wide-angle without dark corners.

Super durable injection-molded ring.















Specifications

Wheelbase: 153mm

Top Plate Thickness: 3.5mm

Bottom Plate Thickness: 2mm

Camera Mounting Distance: 19/20mm

ESC/Motor Mounting Height: 24mm

Flight Stack Mounting Holes: 20x20/25.5x25.5/30.5x30.5mm

Video Transmitter Mounting Holes: 20x20/25.5x25.5

Propeller Size: 90mm

Motor Mounting Holes 12x12mm

Weight: 138g

CNC Heat Sink: 15g

Camera Gimbal: 28g

Recommended Motor: 1806/2004/2006

Recommended KV: 4S/2500-3500KV,6S/1800-2300KV

Recommended Battery: 900-1500mAh 4S/6S

Manual
English 中文 Lens Damping TPU STL
Includes

1x SpeedyBee Bee35 3.5" Micro Frame Kit - Choose Version
1x Hardware, Prints and Accessories


The brand-new Bee35 FPV drone offers robust power,crash-resistant protective frames, and exceptional battery life. The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones.

SpeedyBee Bee35 Cinewhoop 3.5" Micro Frame Kit - Choose Version

SpeedyBee Bee35/Bee35 Pro Cinewhoop 3.5" Micro Frame Kit - Choose Version

The brand-new Bee35 FPV drone offers robust power,crash-resistant protective frames, and exceptional battery life.
The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones. Durable, effective, and resilient, the frame kit is great for both beginners and veterans with its tough prop guards that can survive rough handling.
Choose between Bee35 or the Bee35 Pro, where with the Pro version, you get an advanced heat sink for your VTX.
Be sure to check out all our 3.5&quot frames, and all our Speedy Bee products!
Features

Customized aluminum alloy front end to effectively protect unobstructed O3.

Customized silicone gel shock absorption for the O3 lens, eliminating jello effect.

Customized aluminum alloy heat dissipation device at the bottom, seamlessly
Integrated with O3 and runcam link transmission, while also facilitating type-c and memory card insertion for convenient adjustments.
Flight tower compatibility: Hole patterns for 2020mm/25.5x25.5mm/30.5x30.5mm.

Adjustable GPS mount compatible with both GPS and MASTER 5 V2 GPS mounts, with 121GPS mount included standard.

Supports detachable shock-absorbing gimbal.

H-FOV 135° wide-angle without dark corners.

Super durable injection-molded ring.















Specifications

Wheelbase: 153mm

Top Plate Thickness: 3.5mm

Bottom Plate Thickness: 2mm

Camera Mounting Distance: 19/20mm

ESC/Motor Mounting Height: 24mm

Flight Stack Mounting Holes: 20x20/25.5x25.5/30.5x30.5mm

Video Transmitter Mounting Holes: 20x20/25.5x25.5

Propeller Size: 90mm

Motor Mounting Holes 12x12mm

Weight: 138g

CNC Heat Sink: 15g

Camera Gimbal: 28g

Recommended Motor: 1806/2004/2006

Recommended KV: 4S/2500-3500KV,6S/1800-2300KV

Recommended Battery: 900-1500mAh 4S/6S

Manual
English 中文 Lens Damping TPU STL
Includes

1x SpeedyBee Bee35 3.5&quot Micro Frame Kit - Choose Version
1x Hardware, Prints and Accessories


SpeedyBee Bee35 Cinewhoop 3.5" Micro Frame Kit - Choose Version from WREKD Co.

SpeedyBee Bee35 Cinewhoop 3.5

DarwinFPV

DarwinFPV CineApe 25 Cinewhoop 2.5" Frame Kit

The CineApe 25 frame is the first inverted 2.5-inch cinematic whoop frame of DarwinFPV. The frame is composed of upper and lower layers of carbon plates and a high-strength injection molding ring, with an advanced appearance. In addition, to enhance the durability of the frame, we have also added additional reinforcement to the injection-molded boot, which now excels in crash protection.
The CineApe 25 Frame Kit is a cost-effective cinewhoop frame with tough, injection-molded prop guards to ensure your electronics are safe in the event of a crash. With a quick-release design, repairs on the go are made easy and the frame layout is great for AIO boards. 
Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at WREKD!
Features

Comes with a high-strength one-piece injection-molded propeller guard, which has higher safety, a stronger and more durable frame, and also reduces the probability of risk, so you have more confidence to fly.
It is used the front Type-C parameter adjustment port, with DARWIN parameter adjustment adapter board, easy to adjust parameters.
It comes with a quick-release frame design that only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently.
Compared with the same type of frames, our CineApe 25 frame has added multiple battery strap mounting holes, compatible with 20mm stack mounting holes and 25.5mm AIO mounting holes. The battery anti-skid pad is designed to be extended, which avoids the trouble that the anti-skid pad at the back of the battery is too small to play a non-slip effect when installing the GoPro.
The arms use a strong triangular structure, which is more durable.
The integrated fixed design of the antenna print solves the problem of the traditional antenna moving easily and greatly optimizes the structure of the frame.


 Specifications

Wheelbase: 112mm
Top Plate Hole: 20x20mm，25.5x25.5mm
Bottom Plate Hole: 28x15mm (3 holes)，20x20mm，25.5x25.5mm
Motor Mounting Hole: 9x12mm
Carbon Plate Camera Mounting Hole: 19mm
3D Print Camera Hole:14mm
Weight: 66.7g
Top Plate Thickness: 2.5mm

Includes

1x top plate2.5mm
1x bottom plate 2mm
1x injection molding guard
1x camera mount
1x antenna mount
1x battery anti-skid pad
2x battery cable tie 10x170mm
7x M2x12mm copper standoff
4x M2 nylon nut
6x M2x6 hexagon socket head screw
5x M2x7 hexagon socket head screw
3x M2x10 hexagon socket head screw
4x M2x14 hexagon socket head screw
1x sticker


The CineApe 25 frame is the first inverted 2.5-inch cinematic whoop frame of DarwinFPV. The frame is composed of upper and lower layers of carbon plates and a high-strength injection molding ring, with an advanced appearance. In addition, to enhance the durability of the frame, we have also added additional reinforceme

DarwinFPV CineApe 25 Cinewhoop 2.5" Micro Frame Kit from WREKD Co.

DarwinFPV CineApe 25 Cinewhoop 2.5

DarwinFPV CineApe 25 Cinewhoop 2.5" Micro Frame Kit

The CineApe 25 frame is the first inverted 2.5-inch cinematic whoop frame of DarwinFPV. The frame is composed of upper and lower layers of carbon plates and a high-strength injection molding ring, with an advanced appearance. In addition, to enhance the durability of the frame, we have also added additional reinforcement to the injection-molded boot, which now excels in crash protection.
The CineApe 25 Frame Kit is a cost-effective cinewhoop frame with tough, injection-molded prop guards to ensure your electronics are safe in the event of a crash. With a quick-release design, repairs on the go are made easy and the frame layout is great for AIO boards. 
Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at RaceDayQuads!
Features

Comes with a high-strength one-piece injection-molded propeller guard, which has higher safety, a stronger and more durable frame, and also reduces the probability of risk, so you have more confidence to fly.
It is used the front Type-C parameter adjustment port, with DARWIN parameter adjustment adapter board, easy to adjust parameters.
It comes with a quick-release frame design that only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently.
Compared with the same type of frames, our CineApe 25 frame has added multiple battery strap mounting holes, compatible with 20mm stack mounting holes and 25.5mm AIO mounting holes. The battery anti-skid pad is designed to be extended, which avoids the trouble that the anti-skid pad at the back of the battery is too small to play a non-slip effect when installing the GoPro.
The arms use a strong triangular structure, which is more durable.
The integrated fixed design of the antenna print solves the problem of the traditional antenna moving easily and greatly optimizes the structure of the frame.


 Specifications

Wheelbase: 112mm
Top Plate Hole: 20x20mm，25.5x25.5mm
Bottom Plate Hole: 28x15mm (3 holes)，20x20mm，25.5x25.5mm
Motor Mounting Hole: 9x12mm
Carbon Plate Camera Mounting Hole: 19mm
3D Print Camera Hole:14mm
Weight: 66.7g
Top Plate Thickness: 2.5mm

Includes

1x top plate2.5mm
1x bottom plate 2mm
1x injection molding guard
1x camera mount
1x antenna mount
1x battery anti-skid pad
2x battery cable tie 10x170mm
7x M2x12mm copper standoff
4x M2 nylon nut
6x M2x6 hexagon socket head screw
5x M2x7 hexagon socket head screw
3x M2x10 hexagon socket head screw
4x M2x14 hexagon socket head screw
1x sticker


FPV Cycle

FPV Cycle CineSplore 3" Frame

FPVCycle

NEW!!CineSplore Blog containing recommendations and more details about the setupThis is a mega-cinewhoop frame not unlike any other 3” ducted design. It is NOT intended to be an acrobatic machine. It is intended for slow-ish, stable, controlled flight with the payload of a GoPro Hero 8 or similar with a TPU mount. The frame is specifically designed to be lightweight (by comparison to others), durable, easy to build/repair and cost effective to maintain. It has two 20x20 mounting platforms and one Toothpick style whoop board mount (two separate stack platforms). It is designed to fit analog components or the Vista unit. The GoPro/HD mounting platform is the same as on the CineGlide and Fouride. Camera mounts for one will be easy to swap from frame to frame.This platform performs best with the FPVCycle 2203 3450kv motor, 4S 1100mah battery, V2 Ducts, and 25mm standoffs because the V2 Ducts are shorter. The basic ducts are from the CLOUD-149. They provide adequate prop protection/safety for most situations and are decently durable while being extremely cost effective. Unfortunately, even with the genuine FPVCycle 2203 3450kv motor, you will still have some washout in extreme situations and minor yaw lock problems in gusty or confined environments such as a narrow corridor/hallway. The V3 Ducts fix most of these issues and are a bolt on replacement for the original ducts. If you are an experienced FPV pilot with developed fine motor control skills in this area, you will appreciate the V3 Ducts quite a bit. If you are novice to intermediate level, you’ll definitely notice a difference but it may not be quite as significant to you.Compared to a typical Cinewhoop with your standard issue ~1506 and any prop, this platform running FPVCycle 2203 3450kv and the V2 ducts is dramatically improved. The motors account for about 75% of that improvement.  Dropping the standoff height to 25mm is just icing on the cake if you care to do so
Note: Tge ducts do NOT fit the frame perfectly on purpose. When screwed into place the ducts are held under tension and are somewhat oval. When fresh props are inserted, they will rub against that walls of that duct. Arm the quad and get the props spinning, then hover for a few seconds to allow them to grind into place. It will be loud during this process and then it will quiet down considerably. This sort of fit actually improves efficiency a but but more importantly, reduces overall vibrations in the system because it&#39s all held under tension. Again, this imperfection is on purpose and 100% if the ducts do not fit perfectly. 
Print files:GoPro 5, 6, 7, adjustable angle mount

Please please please check your FC orientation, motor orientation and prop orientation BEFORE the first flight. Always test arm with your controller and NO props on and check to make sure everything is working right. Note that this frame is designed to use a whoop board but in a square configuration. Not diamond.  If you are using a whoop board, at the absolute minimum you will need to yaw the board at least 45deg in the flight firmware settings to have it in the correct orientation.  Also, because of how whoop boards mount motors on the corners, it&#39s easy to end up with mixed numbered motors. Remapping motors is not difficult. There will be a video uploadeded to this description page soon with quick details on how to remap. 
 
Details:

55g without ducts
101g with basic ducts
125g with V2 Ducts
155mm diagonal size motor center to motor center
~215mm sideways width from end duct to end of duct
~182mm front to back from end of duct to end of duct
12x12 M2 motor mounting platform ONLY
Two 20x20 stacks or one 20x20 and one Toothpick board
Toothpick/whoop mount fits 25.4x25.4 through 26.5x26.5 size
TPU FPV cam mount made for mini size, will stretch to fit micro too
100% DJI Vista support and strongly encouraged
Recommended motor: FPVCycle 2203 - 3450kv
Recommended prop: Gemfan 75mm Cinewhoop prop

Recommended build:

FPVCycle 2203 motor
Gemfan 3” (75mm) Cinewhoop prop
GoPro/camera mounts
30A 4S good cheap whoop board

V2 Ducts (optional)

V3 Ducts (optional)

25mm standoffs (optional with V2 Ducts)

Click Here for Build Guide
Click Here for Build Guide and Discussion 
 
Video Build Guide:

Installing CineSplore StanFPV Ducts:

NEW!!CineSplore Blog containing recommendations and more details about the setupThis is a mega-cinewhoop frame not unlike any other 3” ducted design. It is NOT intended to be an acrobatic machine. It is intended for slow-ish, stable, controlled flight with the payload of a GoPro Hero 8 or similar with a TPU mount. The 

FPVCycle CineSplore Frame from WREKD Co.

FPVCycle CineSplore Frame

AxisFlying CineON C35 V2 Cinewhoop 3.5" Frame Kit

AxisFlying











The AxisFlying CineON C30 V2 Cinewhoop 3&quot Micro Frame Kit is a powerful and lightweight piece of engineering, built for maximum durability and performance. It has a unique 4-screw blade guard swap for easy maintenance, and supports 19x19mm camera mounting for DJI O3 cameras. Featuring CNC aluminum camera side plates, and a 3D printed GPS mount on the tail, this kit is an all-in-one solution for advanced aerial photography.
Choose the color of your prop guards between blue-green clear and grey clear!










Check out our other 3&quot frames and all our Axis Flying Products!
Features

Fully upgraded redesign and new appearance
Camera side plates have been upgraded to CNC aluminum parts
Compatible with DJI O3 Cameras 
Supports cameras with a 19x19mm mounting 
The tail has been equipped with a 3D printed GPS mount


 


Specifications

Wheelbase: 138mm
Top plate: 3.2mm
Bottom plate: 2mm
Arm: 3.2mm
FC mounting holes: 25.5mm x 25.5mm M2 / 20mm x 20mm M2
VTX mounting holes: 25.5mm x 25.5mm / 20mm x 20mm 
Motor mounting holes: 9mm x 9mm / 12mm x 12mm
Camera installation space: 14-20mm
Suitable propeller size: 3″propeller
Weight: 127g (without TPU)

Includes


1x AxisFlying CineON C30 V2 Cinewhoop 3&quot Micro Frame Kit
1x Battery Ant-Slip Pad
1x 3D Printed Parts Set
1x Hardware Set

1x Main Plate
2x LiPo Strap
1x Top Plate



The AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit is a powerful and lightweight piece of engineering, built for maximum durability and performance. It has a unique 4-screw blade guard swap for easy maintenance, and supports 19x19mm camera mounting for DJI O3 cameras. Featuring CNC aluminum camera side plates, a

AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit - Choose Color from WREKD Co.

AxisFlying CineON C30 V2 Cinewhoop 3

AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit - Choose Color

AXIS FLYING




The Axisflying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, minimal noise, and up to 9 minutes of flying time.



Be sure to check out all our 3.5" frames, and all our Axis Flying Products!
Features

Better wind resistance for smoother footage - C224 Motor, more torque and power

Provide adequate security for the whoop - High performance 40A/F722 AIO

No jello for more stable footage - Triangular shock-absorbing gimbal

The strength has been improved ,don't worry about crash - The frame is fixed with 6 customized M3-7075 standoffs

Reducing the risk of lost drone - The drone and the frame kit are equipped with beeper as standard 

Newly designed ducted aerodynamic layout to effectively reduce flight noise

Independent receiver storage, convenient for binding

Support 12mm/9mm motor mounting

27mm height, compatible with most VTXs


Specifications

Wheelbase: 152mm
Weight: 140.7g
Bottom plate thickness: 2mm
Top plate thickness: 3.5mm
Carbon plate material: T700
Bottom-to-top distance: 27mm
Motor mounting: 9x9mm &amp 16x16mm
VTX mounting: 20mm/25.5mm (M2)
Stack mounting: 20mm/25.5mm (M2)

Camera Space: 14~20mm
Prop size: Max 3.5mm 

Includes

1x AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard


The Axisflying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, m

AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard

AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray P











The AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit is a powerful and lightweight piece of engineering, built for maximum durability and performance. It has a unique 4-screw blade guard swap for easy maintenance, and supports 19x19mm camera mounting for DJI O3 cameras. Featuring CNC aluminum camera side plates, and a 3D printed GPS mount on the tail, this kit is an all-in-one solution for advanced aerial photography.
Choose the color of your prop guards between blue-green clear and grey clear!










Check out our other 3" frames and all our Axis Flying Products!
Features

Fully upgraded redesign and new appearance
Camera side plates have been upgraded to CNC aluminum parts
Compatible with DJI O3 Cameras 
Supports cameras with a 19x19mm mounting 
The tail has been equipped with a 3D printed GPS mount


 


Specifications

Wheelbase: 138mm
Top plate: 3.2mm
Bottom plate: 2mm
Arm: 3.2mm
FC mounting holes: 25.5mm x 25.5mm M2 / 20mm x 20mm M2
VTX mounting holes: 25.5mm x 25.5mm / 20mm x 20mm 
Motor mounting holes: 9mm x 9mm / 12mm x 12mm
Camera installation space: 14-20mm
Suitable propeller size: 3″propeller
Weight: 127g (without TPU)

Includes


1x AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit
1x Battery Ant-Slip Pad
1x 3D Printed Parts Set
1x Hardware Set

1x Main Plate
2x LiPo Strap
1x Top Plate






The Axisflying CineON C35 V2 Cinewhoop 3.5&quot Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, minimal noise, and up to 9 minutes of flying time.



Be sure to check out all our 3.5&quot frames, and all our Axis Flying Products!
Features

Better wind resistance for smoother footage - C224 Motor, more torque and power

Provide adequate security for the whoop - High performance 40A/F722 AIO

No jello for more stable footage - Triangular shock-absorbing gimbal

The strength has been improved ,don&#39t worry about crash - The frame is fixed with 6 customized M3-7075 standoffs

Reducing the risk of lost drone - The drone and the frame kit are equipped with beeper as standard 

Newly designed ducted aerodynamic layout to effectively reduce flight noise

Independent receiver storage, convenient for binding

Support 12mm/9mm motor mounting

27mm height, compatible with most VTXs


Specifications

Wheelbase: 152mm
Weight: 140.7g
Bottom plate thickness: 2mm
Top plate thickness: 3.5mm
Carbon plate material: T700
Bottom-to-top distance: 27mm
Motor mounting: 9x9mm &ampamp 16x16mm
VTX mounting: 20mm/25.5mm (M2)
Stack mounting: 20mm/25.5mm (M2)

Camera Space: 14~20mm
Prop size: Max 3.5mm 

Includes

1x AxisFlying CineON C35 V2 Cinewhoop 3.5&quot Micro Frame Kit - Clear Gray Prop Guard


AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard from WREKD Co.

AxisFlying CineON C35 V2 Cinewhoop 3.5

AOS RC

AOS RC EVO V1.2 Frame Kit

When using heavier action cameras such as the GoPro Hero 9/10/11, opting for an AOS RC EVO V1.2 Frame Kit provides significant benefits in thrust and efficiency. 

AOS RC EVO V1.2 Frame Kit 

BetaFPV Beta95X V3 Cinewhoop Frame

Adopts a brand-new innovative pusher style, Beta95X V3 frame has higher durability, concise appearance and more easier installation than V2 frame. It also comes with built-in carbon fiber to especially reserve a storage room for the antenna. Beta95X V3 Whoop Quadcopter and  Beta95X V3 HD Digital VTX have concise pusher appearance and durable flight with this frame.

Bullet Point

Built-in carbon fiber for flight controller and reserve a storage room for the antenna, Beta95X V3 frame has a more concise appearance and more convenient for installation.

Made of high-quality PA12 material, Beta95X V3 frame kit has high abrasion resistance, toughness, showing excellent impact resistance in drop &amp impact tests, it also can dampen noise and vibrations, bringing a more durable flight and no fear of damage. 

Beta95X V3 frame also comes with an EVA foam cushioning design to give pilots more safety flying.
Compared with the Beta95X V2 frame, V3 frame kit maintain the "pusher style" design but has higher durability, a concise appearance and easier for installation.

 Equipped with a shock mitigation system, this frame kit can carry a lightweight camera like SMO 4K camera, and eliminate the shake of the camera. It makes the camera more stable on the flight, which ensures pilots can capture all the beautiful moments of flight with the stabilized and clear video.






Specification

Item: Beta95X V3 Frame Kit
Wheelbase: 100mm
Color: Black
Material: PA12

Weight: 39.09g
Recommend Motor:  1106 3800KV Brushless Motor 、1106 4500KV Brushless Motor、1404 4500KV Brushless Motor

Recommend FC: F4 AIO 20A Toothpick Brushless FC V4 




Package

1 * Beta95X V3 Whoop Frame(Black)
3 * Rubber Dumper
1 * 20mm FPV Camera Mount
1 * 14mm FPV Camera Mount
1 * Spare EVA Foam Tape
2 * No-Slip Rubber Pads

1 * Spare EVA Foam Tape
1 * Pack of Screws



Adopts a brand-new innovative pusher style, Beta95X V3 frame has higher durability, concise appearance and more easier installation than V2 frame. It also comes with built-in carbon fiber to especially reserve a storage room for the antenna. Beta95X V3 Whoop Quadcopter and  Beta95X V3 HD Digital VTX have concise pusher

Beta95X V3 Frame Kit

Adopts a brand-new innovative pusher style, Beta95X V3 frame has higher durability, concise appearance and more easier installation than V2 frame. It also comes with built-in carbon fiber to especially reserve a storage room for the antenna. Beta95X V3 Whoop Quadcopter and  Beta95X V3 HD Digital VTX have concise pusher appearance and durable flight with this frame. 
Check out all our Frames and the rest of our BetaFPV Products! 
Features: 

Built-in carbon fiber for flight controller and reserve a storage room for the antenna, Beta95X V3 frame has a more concise appearance and more convenient for installation.

Made of high-quality PA12 material, Beta95X V3 frame kit has high abrasion resistance, toughness, showing excellent impact resistance in drop &ampamp impact tests, it also can dampen noise and vibrations, bringing a more durable flight and no fear of damage.

Beta95X V3 frame also comes with an EVA foam cushioning design to give pilots more safety flying.
Compared with the Beta95X V2 frame, V3 frame kit maintain the &quotpusher style&quot design but has higher durability, a concise appearance and easier for installation.
Equipped with a shock mitigation system, this frame kit can carry a lightweight camera like SMO 4K camera, and eliminate the shake of the camera. It makes the camera more stable on the flight, which ensures pilots can capture all the beautiful moments of flight with the stabilized and clear video.

Specifications: 

Item: Beta95X V3 Frame Kit
Wheelbase: 100mm
Color: Black
Material: PA12
Weight: 39.09g
Recommend Motor: 1106 3800KV Brushless Motor and  1106 4500KV Brushless Motor

Recommend FC: F4 AIO 20A Toothpick Brushless FC V4


Package Includes: 


1 * Beta95X V3 Whoop Frame(Black)
3 * Rubber Dumper
1 * 20mm FPV Camera Mount
1 * 14mm FPV Camera Mount
1 * Spare EVA Foam Tape
2 * No-Slip Rubber Pads

1 * Spare EVA Foam Tape
1 * Pack of Screws







Adopts a brand-new innovative pusher style, Beta95X V3 frame has higher durability, concise appearance and more easier installation than V2 frame. It also comes with built-in carbon fiber to especially reserve a storage room for the antenna. Beta95X V3 Whoop Quadcopter and  Beta95X V3 HD Digital VTX have concise pusher

BETAFPV Beta95X V3 Frame Kit from WREKD Co.

BETAFPV Beta95X V3 Frame Kit

A brand-new innovative pusher style, the Beta95X V3 frame by BETAFPV has higher durability, a concise appearance, and easier installation than the V2 frame.

BetaFPV Beta95X V3 Frame Kit

Lumenier

Lumenier QAV-S 2 JohnnyFPV SE 7" Frame Kit

LUMENIER

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only one screw per side. The frame's aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 7" frame achieves an unparalleled balance of durability and weight at 182g (frame only).Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance.
Check out the rest of our Lumenier products or the rest of our 7" drone frames.
Features

Made in Collaboration with expert FPV pilot JohnnyFPV
Frame made of High-Quality Lumenier components
Adjustable Aluminum XT60 and Accessory Mount
Backward-compatible mounting patterns
Aluminum FPV Camera Protection
Balanced Durability and Weight
Injection-Molded GoPro Mount
DeadCat Arm Configuration
O3 Compatible Mounting
Arm Braces for Rigidity
X-Lock Arm Retention



BALANCED DURABILITY AND WEIGHTThe QAV-S 2 JohnnyFPV Edition builds on the durability of its predecessor with upgraded 6mm thick arms in addition to the aluminum X-lock and FPV camera protection. At 133g (frame only - without accessories) this combination provides an industry-leading balance of weight and durability for even the most demanding applications.

X-LOCK ARM RETENTIONThe QAV-S 2 introduces a new lateral X-Lock arm system. This all-aluminum arm locking system improves the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw per side for easy transportation.

ALUMINUM FPV CAMERA PROTECTIONThe new FPV camera mounting solution offers excellent camera protection and support for various cameras through customizable carbon plates. The frame includes plates with damped mounts tested and optimized for the O3 camera and plates with mounts for a range of other camera options. If you want to create your own, the M2 mount points on the aluminum guards easily allow for custom mounts. Your imagination is the limit.

INJECTION MOLDED GOPRO MOUNTThe QAV-S 2 uses the same GoPro mount pattern used by other Lumenier frames, allowing a durable injection molded GoPro mount to attach with a single screw.

BACKWARD-COMPATIBLE MOUNTING PATTERNSFor those who still want to use printed GoPro and antenna mounts, the QAV-S 2 brings the JohnnyFPV frame into line with the mount patterns from the other QAV-S series frames. The new edition now uses the same mounting pattern and standoff placement as the other frames in the series. All previous QAV-S* mounts and Bardwell Special Edition frames will fit the JohnnyFPV Edition without modification. *Original QAV-S JohnnyFPV Special Edition mounts are no longer compatible

O3 COMPATIBLE MOUNTINGThe rear plate adds 25.5 M1.6 mount holes to mount the O3 air unit to the frame directly. The frame kit also includes a 5mm full aluminum mounting kit to allow for perfect wire routing for both the O3 air unit and a rear XT60 connector.

ADJUSTABLE ALUMINUM XT60 AND ACCESSORY MOUNTA custom rear mounting solution allows for a hard mounted XT60 connection as well as a range of accessory mounting options for antennas, GPS, and rear-facing action cameras. Adjustable angles allows for the perfect position regardless of the accessory being used. The frame kit includes plates for the injection molded GoPro mount and GPS mounts with both single and dual antenna options, as well as a single antenna only option.

FOLDING ARMSThe new lock system on the QAV-S 2 JohnnyFPV SE allows the arms to fold with only one screw per side for easy transportation. Simply remove the side screws and wedges, and you are now able to fold the arms.
Specifications

Rear Stack Dimensions: 20x20 (potentially 30x30 with adapter)
Custom Parts: 6061 Aluminum (Bronze Gold)
Standoffs: 7075 Aluminum (Bronze Gold)
Screws: Black Zinc Steel 12.9 grade
Weight: 182g (without accessories)
Middle Stack Dimensions: 30x30
Arm: 6mm 3K Carbon Fiber
Frame Size: 220mm

Lumenier QAV-S 2 JohnnyFPV Manual
IMPORTANT NOTES

The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.


Includes

1x Lumenier QAV-S 2 JohnnyFPV SE 7" Frame Kit



1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna
1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate
1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right
2x JohnnyFPV QAV-S 2 Camera Plate for Grommets
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left
1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate
1x JohnnyFPV QAV-S 2 20mm Camera Plate Right
1x JohnnyFPV QAV-S 2 20mm Camera Plate Left
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate
1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate
1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate
1x JohnnyFPV QAV-S 2 Rear Base Mount Right
1x JohnnyFPV QAV-S 2 Aluminum Guard Right
1x 14 Gauge Silicon Wire (Pair, Red and Black)
1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm
1x JohnnyFPV QAV-S 2 Rear Base Mount Left
1x JohnnyFPV QAV-S 2 Aluminum Guard Left
2x JohnnyFPV QAV-S 2 6mm Arm Wedge
2x JohnnyFPV QAV-S 2 7 Inch Arm Brace
2x JohnnyFPV QAV-S 2 7 Inch Arm Front
2x JohnnyFPV QAV-S 2 7 Inch Arm Rear
1x JohnnyFPV QAV-S 2 Split Plate Front
1x JohnnyFPV QAV-S 2 Split Plate Rear
1x Lumenier QAV-PRO Gopro Mount
2x 5mm O3 Air Unit Mount 20mm
1x JohnnyFPV QAV-S 2 Top Plate
2x Heatshrink 5mm Diameter
2x Lumenier Battery Strap
4x Knurled Standoff
1x XT60E-M (Black)
1x Hardware Set
4x Foam Pads



Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only o

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience.&nbsp

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. 

Lumenier QAV-S 2 JohnnyFPV SE 7” Frame Kit

BetaFPV Pavo25 2.5" Cinewhoop Frame Kit

Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stable flight and no fear of damage. 

Bullet Point

With the insert copper nut design on the main screw holes, only 6 screws are enough to assemble the whoop duct and drone, which is convenient to build. The Pavo25 frame sports a reasonable structure assembly design that is optimized to decrease complex components, making the build easy.
Made of high-quality PA12 material and 2.5mm carbon fiber. With a strong and durable frame kit, the Pavo25 frame optimizes the vibration damping structure for the camera mount, allowing pilots to get an excellent experience.
An innovative pusher frame with a duct design. It generates more lift for the whole quadcopter, improving the ability of endurance and propulsion.
Equipped with a CNC Vista Adapter. It effectively provides the Caddx Vista HD Digital VTX with a good cool down by increasing the heat dissipation area, reducing the influence of heat on VTX.



CNC Vista Adapter
CNC Vista Adapter effectively provides the Caddx Vista HD Digital VTX with a good cool down by increasing the heat dissipation area, reducing the influence of heat on VTX. It is easy to install and has two mounting angles, which can be mounted by the angle 0° or 45° depending on your needs.
Note: The CNC Vista Adapter is included in the frame kit, if you need to buy it separately, please click here.


Specification

Item: Pavo25 Frame Kit
Wheelbase: 108mm
Color: Black/Transparent Grey/Yellow/Blue/Purple
Material: PA12
Frame Color: Black

Weight: 68g (frame kit), 31.5g (without carbon fiber)
Body Size: 153.2*153.7mm (without EVA adhesive foam)
Top plate thickness: 2.5mm
Propeller size: 2.5-inch
FC pattern: 25.5*25.5mm
FPV cam spacing: 14mm
Recommend Motor: 1404 4500KV Brushless motor

Recommend Props: Gemfan D63-3B (Gray)

Recommend Battery: 4S 750mAh/4S 850mAh

Recommend FC: F405 AIO 20A Toothpick V4 BMI270

Recommend Camera: SMO 4K, DJI Action 2
Recommend VTX: Caddx Nebula Pro Nano Vista Kit/Caddx Baby Ratel2+A03 400mW 5.8G



Package
Frame Kit

1 * Pavo25 Frame Kit
1 * SMO 4K Power Cable
1 * Pavo25 Frame Assembling Guide
1 * CNC Vista Adapter

2 * Spare EVA foam tape (Black)
2 * Spare EVA foam tape (Red)
2 * 180mm Battery Strap
1 * Pack of Screws
1 * Pack of 3D Printed Parts
1 * Rear LED Light
4 * 3M Double-Sided Tapes


Frame (without carbon fiber)

1 * Pavo25 Whoop Frame (without carbon fiber)
2 * Spare EVA foam tape (Black)
2 * Spare EVA foam tape (Red)
4 * 3M Double-Sided Tapes
6 * M2*5 Screws
1 * Screwdriver



Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stable flight and no fear of damage.  Bullet Point With the insert copper nut design on the main screw holes, only 6 screws are enough to assemble the whoop duct and drone, which is convenient to build. The Pa

Pavo25 Frame Kit

This Frame Kit is for the BETAFPV Pavo25 whoop. The Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stability and protection.

BETAFPV Pavo25 2.5" Cinewhoop Frame Kit

BETAFPV Pavo25 2.5&quot Cinewhoop Frame Kit

HolyBro

Holybro Kopis X8 5" Cinelifter Frame Kit - Caged Version

Holybro

This caged version&nbspHolybro Kopis X8 Cinelifter 5&rdquo&nbspFrame Kit&nbspis for the ultimate Kopis Cinelifter!&nbsp

This caged version Holybro Kopis X8 Cinelifter 5” Frame Kit is for the ultimate Kopis Cinelifter! 

Holybro Kopis X8 5&quot Cinelifter Frame Kit - Caged Version

Lumenier QAV-PRO Micro Whoop 2.5" Frame

Brain3D

This&nbspTPU Antenna / XT-30 Mount&nbspis for the&nbspLumenier QAV-PRO Micro Whoop - Cinequads Edition.

This TPU Antenna / XT-30 Mount is for the Lumenier QAV-PRO Micro Whoop - Cinequads Edition.

Lumenier QAV-PRO Micro Whoop 2.5" Cinequads Edition - TPU Antenna / XT-30 Mount

Lumenier QAV-PRO Micro Whoop 2.5&quot Cinequads Edition - TPU Antenna / XT-30 Mount

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Motor Stator Size

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 

Flight Controllers

Camera Size

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 