FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Lumenier

Lumenier QAV-S 2 JohnnyFPV SE 7" Frame Kit

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience.&nbsp

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. 

Lumenier QAV-S 2 JohnnyFPV SE 7” Frame Kit

LUMENIER

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only one screw per side. The frame's aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 7" frame achieves an unparalleled balance of durability and weight at 182g (frame only).Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance.
Check out the rest of our Lumenier products or the rest of our 7" drone frames.
Features

Made in Collaboration with expert FPV pilot JohnnyFPV
Frame made of High-Quality Lumenier components
Adjustable Aluminum XT60 and Accessory Mount
Backward-compatible mounting patterns
Aluminum FPV Camera Protection
Balanced Durability and Weight
Injection-Molded GoPro Mount
DeadCat Arm Configuration
O3 Compatible Mounting
Arm Braces for Rigidity
X-Lock Arm Retention



BALANCED DURABILITY AND WEIGHTThe QAV-S 2 JohnnyFPV Edition builds on the durability of its predecessor with upgraded 6mm thick arms in addition to the aluminum X-lock and FPV camera protection. At 133g (frame only - without accessories) this combination provides an industry-leading balance of weight and durability for even the most demanding applications.

X-LOCK ARM RETENTIONThe QAV-S 2 introduces a new lateral X-Lock arm system. This all-aluminum arm locking system improves the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw per side for easy transportation.

ALUMINUM FPV CAMERA PROTECTIONThe new FPV camera mounting solution offers excellent camera protection and support for various cameras through customizable carbon plates. The frame includes plates with damped mounts tested and optimized for the O3 camera and plates with mounts for a range of other camera options. If you want to create your own, the M2 mount points on the aluminum guards easily allow for custom mounts. Your imagination is the limit.

INJECTION MOLDED GOPRO MOUNTThe QAV-S 2 uses the same GoPro mount pattern used by other Lumenier frames, allowing a durable injection molded GoPro mount to attach with a single screw.

BACKWARD-COMPATIBLE MOUNTING PATTERNSFor those who still want to use printed GoPro and antenna mounts, the QAV-S 2 brings the JohnnyFPV frame into line with the mount patterns from the other QAV-S series frames. The new edition now uses the same mounting pattern and standoff placement as the other frames in the series. All previous QAV-S* mounts and Bardwell Special Edition frames will fit the JohnnyFPV Edition without modification. *Original QAV-S JohnnyFPV Special Edition mounts are no longer compatible

O3 COMPATIBLE MOUNTINGThe rear plate adds 25.5 M1.6 mount holes to mount the O3 air unit to the frame directly. The frame kit also includes a 5mm full aluminum mounting kit to allow for perfect wire routing for both the O3 air unit and a rear XT60 connector.

ADJUSTABLE ALUMINUM XT60 AND ACCESSORY MOUNTA custom rear mounting solution allows for a hard mounted XT60 connection as well as a range of accessory mounting options for antennas, GPS, and rear-facing action cameras. Adjustable angles allows for the perfect position regardless of the accessory being used. The frame kit includes plates for the injection molded GoPro mount and GPS mounts with both single and dual antenna options, as well as a single antenna only option.

FOLDING ARMSThe new lock system on the QAV-S 2 JohnnyFPV SE allows the arms to fold with only one screw per side for easy transportation. Simply remove the side screws and wedges, and you are now able to fold the arms.
Specifications

Rear Stack Dimensions: 20x20 (potentially 30x30 with adapter)
Custom Parts: 6061 Aluminum (Bronze Gold)
Standoffs: 7075 Aluminum (Bronze Gold)
Screws: Black Zinc Steel 12.9 grade
Weight: 182g (without accessories)
Middle Stack Dimensions: 30x30
Arm: 6mm 3K Carbon Fiber
Frame Size: 220mm

Lumenier QAV-S 2 JohnnyFPV Manual
IMPORTANT NOTES

The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.


Includes

1x Lumenier QAV-S 2 JohnnyFPV SE 7" Frame Kit



1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna
1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate
1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right
2x JohnnyFPV QAV-S 2 Camera Plate for Grommets
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left
1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate
1x JohnnyFPV QAV-S 2 20mm Camera Plate Right
1x JohnnyFPV QAV-S 2 20mm Camera Plate Left
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate
1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate
1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate
1x JohnnyFPV QAV-S 2 Rear Base Mount Right
1x JohnnyFPV QAV-S 2 Aluminum Guard Right
1x 14 Gauge Silicon Wire (Pair, Red and Black)
1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm
1x JohnnyFPV QAV-S 2 Rear Base Mount Left
1x JohnnyFPV QAV-S 2 Aluminum Guard Left
2x JohnnyFPV QAV-S 2 6mm Arm Wedge
2x JohnnyFPV QAV-S 2 7 Inch Arm Brace
2x JohnnyFPV QAV-S 2 7 Inch Arm Front
2x JohnnyFPV QAV-S 2 7 Inch Arm Rear
1x JohnnyFPV QAV-S 2 Split Plate Front
1x JohnnyFPV QAV-S 2 Split Plate Rear
1x Lumenier QAV-PRO Gopro Mount
2x 5mm O3 Air Unit Mount 20mm
1x JohnnyFPV QAV-S 2 Top Plate
2x Heatshrink 5mm Diameter
2x Lumenier Battery Strap
4x Knurled Standoff
1x XT60E-M (Black)
1x Hardware Set
4x Foam Pads



Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only o

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

Lumenier QAV-S 2 JohnnyFPV SE 5" Frame Kit

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold for convenient transportation with just one screw per side. The frame's aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 5" frame achieves an unparalleled balance of durability and weight at 133g (frame only).Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance.
Features

Made in Collaboration with expert FPV pilot JohnnyFPV
Frame made of High-Quality Lumenier components
Adjustable Aluminum XT60 and Accessory Mount
Backward-compatible mounting patterns
Aluminum FPV Camera Protection
Balanced Durability and Weight
Injection-Molded GoPro Mount
O3 Compatible Mounting
X-Lock Arm Retention



 BALANCED DURABILITY AND WEIGHTThe QAV-S 2 JohnnyFPV Edition builds on the durability of its predecessor with upgraded 6mm thick arms in addition to the aluminum X-lock and FPV camera protection. At 133g (frame only - without accessories) this combination provides an industry-leading balance of weight and durability for even the most demanding applications.

X-LOCK ARM RETENTIONThe QAV-S 2 introduces a new lateral X-Lock arm system. This all-aluminum arm locking system improves the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw per side for easy transportation.

ALUMINUM FPV CAMERA PROTECTIONThe new FPV camera mounting solution offers excellent camera protection and support for various cameras through customizable carbon plates. The frame includes plates with damped mounts tested and optimized for the O3 camera and plates with mounts for a range of other camera options. If you want to create your own, the M2 mount points on the aluminum guards easily allow for custom mounts. Your imagination is the limit.

INJECTION MOLDED GOPRO MOUNTThe QAV-S 2 uses the same GoPro mount pattern used by other Lumenier frames, allowing a durable injection molded GoPro mount to attach with a single screw.

BACKWARD-COMPATIBLE MOUNTING PATTERNSFor those who still want to use printed GoPro and antenna mounts, the QAV-S 2 brings the JohnnyFPV frame into line with the mount patterns from the other QAV-S series frames. The new edition now uses the same mounting pattern and standoff placement as the other frames in the series. All previous QAV-S* mounts and Bardwell Special Edition frames will fit the JohnnyFPV Edition without modification. *Original QAV-S JohnnyFPV Special Edition mounts are no longer compatible

O3 COMPATIBLE MOUNTINGThe rear plate adds 25.5 M1.6 mount holes to mount the O3 air unit to the frame directly. The frame kit also includes a 5mm full aluminum mounting kit to allow for perfect wire routing for both the O3 air unit and a rear XT60 connector.

ADJUSTABLE ALUMINUM XT60 AND ACCESSORY MOUNTA custom rear mounting solution allows for a hard mounted XT60 connection as well as a range of accessory mounting options for antennas, GPS, and rear-facing action cameras. Adjustable angles allows for the perfect position regardless of the accessory being used. The frame kit includes plates for the injection molded GoPro mount and GPS mounts with both single and dual antenna options, as well as a single antenna only option.

FOLDING ARMSThe new lock system on the QAV-S 2 JohnnyFPV SE allows the arms to fold with only one screw per side for easy transportation. Simply remove the side screws and wedges, and you are now able to fold the arms.
Specifications

Rear Stack Dimensions: 20x20 (potentially 30x30 with adapter)
Custom Parts: 6061 Aluminum (Bronze Gold)
Standoffs: 7075 Aluminum (Bronze Gold)
Screws: Black Zinc Steel 12.9 grade
Weight: 133g (without accessories)
Middle Stack Dimensions: 30x30
Arm: 6mm 3K Carbon Fiber
Frame Size: 220mm

Lumenier QAV-S 2 JohnnyFPV Manual
IMPORTANT NOTES

The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.


Includes

1x Lumenier QAV-S 2 JohnnyFPV SE 5" Frame Kit



1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna
1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate
1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right
2x JohnnyFPV QAV-S 2 Camera Plate for Grommets
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left
1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate
1x JohnnyFPV QAV-S 2 20mm Camera Plate Right
1x JohnnyFPV QAV-S 2 20mm Camera Plate Left
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate
1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate
1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate
1x JohnnyFPV QAV-S 2 Rear Base Mount Right
1x JohnnyFPV QAV-S 2 Aluminum Guard Right
1x 14 Gauge Silicon Wire (Pair, Red and Black)
1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm
1x JohnnyFPV QAV-S 2 Rear Base Mount Left
1x JohnnyFPV QAV-S 2 Aluminum Guard Left
2x JohnnyFPV QAV-S 2 6mm Arm Wedge
1x JohnnyFPV QAV-S 2 Split Plate Front
1x JohnnyFPV QAV-S 2 Split Plate Rear
1x Lumenier QAV-PRO Gopro Mount
4x JohnnyFPV QAV-S 2 5 Inch Arm
2x 5mm O3 Air Unit Mount 20mm
1x JohnnyFPV QAV-S 2 Top Plate
2x Heatshrink 5mm Diameter
2x Lumenier Battery Strap
4x Knurled Standoff
1x XT60E-M (Black)
1x Hardware Set
4x Foam Pads




Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold for conveni

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience.

Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit

Flywoo

Flywoo Explorer LR Walksnail Long Range 4" Frame Kit











The Flywoo Explorer LR HD Walksnail Deadcat Long Range 4&quot Frame kit is designed to fit the Walksnail VTX and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease and explore with minimal noise. 
Check out the rest of our 4&quot frames,  as well as other great products from Flywoo!











Includes

1x Flywoo Explorer LR 4&quot Walksnail Long Range Frame kit
1x Black TPU 3D Printed Parts 
1x Top plate
1x Bottom plate
1x central plate
2x Front arms
2x Rear arms
2x Side plate
2x Battery straps
1x hardware sets
1x Battery pad
2x insulation sheet


The Flywoo Explorer LR HD Walksnail Deadcat Long Range 4" Frame kit is designed to fit the Walksnail VTX and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with 

Flywoo Explorer LR Walksnail Long Range 4" Frame kit from WREKD Co.

Flywoo Explorer LR Walksnail Long Range 4

Flywoo Explorer LR Walksnail Long Range 4" Frame kit

FLYWOO











The Flywoo Explorer LR HD Walksnail Deadcat Long Range 4" Frame kit is designed to fit the Walksnail VTX and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease and explore with minimal noise. 
Check out the rest of our 4" frames,  as well as other great products from Flywoo!











Includes

1x Flywoo Explorer LR 4" Walksnail Long Range Frame kit
1x Black TPU 3D Printed Parts 
1x Top plate
1x Bottom plate
1x central plate
2x Front arms
2x Rear arms
2x Side plate
2x Battery straps
1x hardware sets
1x Battery pad
2x insulation sheet


The Explorer LR 4 Walksnail frame is perfectly designed for the Walksnail VTX and Camera , while keeping FLYWOO's signature compact design.

Flywoo Explorer LR 4" Walksnail Frame Kit

Flywoo Explorer LR 4&quot Walksnail Frame Kit

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module while keeping FLYWOO&#x27s signature compact design. We&#x27ve also designed a new camera canopy to protect the lens well compatible with both 16X16 and 20X20 flight towers. The frame is made of durable high quality 3K carbon fiber board with excellent performance and fashionable appearance. NOTE* The only parts compatible with the Explorer LR V2 frame are the front arms、 In the Box 1 X Black TPU 3D Printed Parts 1 X Top plate 1X Bottom plate 1x central plate 2x Front arms 2x Rear arms 2x Side plate 2x Battery straps 1x hardware sets 1x Battery pad 2x insulation sheet

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module while keeping FLYWOO's signature compact design. We've also designed a new camera canopy to protect the lens well compatible with both 16X16 and 20X20 flight towers. The frame is made of durable high quality 3K carbon fiber board with excellent performance and fashionable appearance. NOTE* The only parts compatible with the Explorer LR V2 frame are the front arms、 In the Box 1 X Black TPU 3D Printed Parts 1 X Top plate 1X Bottom plate 1x central plate 2x Front arms 2x Rear arms 2x Side plate 2x Battery straps 1x hardware sets 1x Battery pad 2x insulation sheet

Explorer LR 4 Walksnail Frame kit

Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame Kit

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module, while keeping FLYWOO's signature compact design.We've also designed a new camera canopy to protect the lens well, compatible with both 16X16 and 20X20 flight towers.

Flywoo Explorer LR 4" O3 Frame Kit

Flywoo Explorer LR 4&quot O3 Frame Kit































The Flywoo Explorer LR HD O3 Deadcat Long Range 4&quot Frame kit is designed to fit the DJI O3 Air unit and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease and explore with minimal noise.
Check out the rest of our 4&quot frames,  as well as other great products from Flywoo!































Includes

1x Flywoo Explorer LR HD O3 Deadcat Long Range 4&quot Frame Kit
1x Black TPU 3D Printed Parts 
1x Top plate
1x Bottom plate
1x central plate
2x Front arms
2x Rear arms
2x Side plate
2x Battery straps
1x hardware sets
1x Battery pad
2x insulation sheet


The Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame kit is designed to fit the DJI O3 Air unit and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease 

Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame Kit from WREKD Co.

Flywoo Explorer LR HD O3 Deadcat Long Range 4

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module while keeping FLYWOO&#x27s signature compact design. We&#x27ve also designed a new camera canopy to protect the lens well compatible with both 16X16 and 20X20 flight towers. The frame is made of durable high quality 3K carbon fiber board with excellent performance and fashionable appearance.  NOTE* The only parts compatible with the Explorer LR V2 frame are the front arms、 In the Box 1 X Black TPU 3D Printed Parts  1 X Top plate 1X Bottom plate 1x central plate 2x Front arms 2x Rear arms 2x Side plate 2x Battery straps 1x hardware sets 1x Battery pad 2x insulation sheet

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module while keeping FLYWOO's signature compact design. We've also designed a new camera canopy to protect the lens well compatible with both 16X16 and 20X20 flight towers. The frame is made of durable high quality 3K carbon fiber board with excellent performance and fashionable appearance.  NOTE* The only parts compatible with the Explorer LR V2 frame are the front arms、 In the Box 1 X Black TPU 3D Printed Parts  1 X Top plate 1X Bottom plate 1x central plate 2x Front arms 2x Rear arms 2x Side plate 2x Battery straps 1x hardware sets 1x Battery pad 2x insulation sheet

Explorer LR O3 Frame kit































The Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame kit is designed to fit the DJI O3 Air unit and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease and explore with minimal noise.
Check out the rest of our 4" frames,  as well as other great products from Flywoo!































Includes

1x Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame Kit
1x Black TPU 3D Printed Parts 
1x Top plate
1x Bottom plate
1x central plate
2x Front arms
2x Rear arms
2x Side plate
2x Battery straps
1x hardware sets
1x Battery pad
2x insulation sheet


Flywoo Firefly Nano Baby FR 40mm 1.6" Frame Kit

This&nbspFrame Kit&nbspis for the&nbspFlywoo Firefly Nano Baby FR Micro Quadcopter which is a freestyle variation of the original.&nbsp

This Frame Kit is for the Flywoo Firefly Nano Baby FR Micro Quadcopter which is a freestyle variation of the original. 

Flywoo Firefly Nano Baby FR 40mm 1.6" 1S Micro Quadcopter - Frame Kit

Flywoo Firefly Nano Baby FR 40mm 1.6&quot 1S Micro Quadcopter - Frame Kit

GEPRC

GEPRC GEP-MK5 Mark5 Pro 5" Frame

New Generation freestyle MARK5 frame. The MARK5 Frame is now officially released in three versions,which are standard version, pro version and pro upgrade kits version.The frame is compatible with DJI AIR UNIT, CADDX VISTA and Analog VTX. MARK5 frame is developed specifically for freestyle with squashed X arm design. U

GEPRC GEP-MK5 Pro 5

The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more endurance.
Gopro case available separately.
Check out all out DJI compatible frames, electronics and accessories as well as our whole GEPRC product line!
Features

Aluminum alloy side plates not only look stunning, but reduce weight and add more endurance.
Developed specifically for freestyle with squashed X arm design
The installation hole of VTX is compatible with DJI Air Unit and VISTA, while maintaining the 30.5*30.5 analog VTX installation hole
Unique shock absorbing structure design, less vibrations and resonance
Specially designed independent capacitor and buzzer compartment for better performance and shaking reduction

Specifications

Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm: 5.0mm
FC mounting holes: 30.5mm x 30.5mm
VTX mounting holes: 30.5mm x 30.5mm / 20mm x 20mm
Motor mounting holes: 16mm x 16mm / 19mm x 19mm
Camera installation space: 19-20mm
Suitable propeller size: 5″ propeller
Dimension: 214mm x 168mm x 42mm
Weight: 130.0g

Includes

1 x GepRC Mk5 Pro 5&quot Frame
1 x Battery strap M15x250mm
2 x Battery strap M20x220mm
2 x Battery Silicone Pads
1 x Set of 3D printings
2 x Action camera mount holder
1 x Set of screws
1 x Set of screwdrivers
1 x Antenna fixed tube


The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more enduranc

GEPRC Mark5 Pro 5" Frame - Choose Version from WREKD Co.

GEPRC Mark5 Pro 5

GEPRC Mark5 Pro 5" Frame - Choose Version

The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more endurance.
Gopro case available separately.
Check out all out DJI compatible frames, electronics and accessories as well as our whole GEPRC product line!
Features

Aluminum alloy side plates not only look stunning, but reduce weight and add more endurance.
Developed specifically for freestyle with squashed X arm design
The installation hole of VTX is compatible with DJI Air Unit and VISTA, while maintaining the 30.5*30.5 analog VTX installation hole
Unique shock absorbing structure design, less vibrations and resonance
Specially designed independent capacitor and buzzer compartment for better performance and shaking reduction

Specifications

Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm: 5.0mm
FC mounting holes: 30.5mm x 30.5mm
VTX mounting holes: 30.5mm x 30.5mm / 20mm x 20mm
Motor mounting holes: 16mm x 16mm / 19mm x 19mm
Camera installation space: 19-20mm
Suitable propeller size: 5″ propeller
Dimension: 214mm x 168mm x 42mm
Weight: 130.0g

Includes

1 x GepRC Mk5 Pro 5" Frame
1 x Battery strap M15x250mm
2 x Battery strap M20x220mm
2 x Battery Silicone Pads
1 x Set of 3D printings
2 x Action camera mount holder
1 x Set of screws
1 x Set of screwdrivers
1 x Antenna fixed tube


The&nbspGEPRC MARK5 Pro Frame Kit&nbspis developed specifically for freestyle with squashed X arm design.&nbsp

The GEPRC MARK5 Pro Frame Kit is developed specifically for freestyle with squashed X arm design. 

GEPRC Mark5 GEP-MK5 5" Freestyle Frame Kit - Black Pro Version 

GEPRC Mark5 GEP-MK5 5&quot Freestyle Frame Kit - Black Pro Version 

Foxeer

Foxeer Aura 5" Freestyle Frame

Single replacement rear arm for the Foxeer Aura 5" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" DJI Frame Replacement Rear Arm (1 Pc.)

Foxeer Aura 5

Replacement middle plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Middle Plate

The new Aura 5" Freestyle &amp; Long Range Frame from Foxeer is a great choice for both freestyle or long Range builds. Available in both teal and black. It features deadcat arm geometry, can fit both the DJI full size Air Unit or Vista VTX's and uses high performance T700 carbon for increased stiffness and vibration r

The Foxeer Aura Lightweight Long Range frame focuses on long flights and smooth flying. Each frame only weighs just over 70g and is perfect for both freestyle and long-range flying.

Foxeer Aura Lightweight LR Freestyle Frame Kit

Single replacement front arm for the Foxeer Aura 5" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" DJI Frame Replacement Front Arm (1 Pc.)

Single replacement top plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Top Plate

Replacement bottom plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Bottom Plate

GEPRC GEP-CL35 CineLog 35 3.5" Frame

The CineLog35 Frame developed by CEPRC for mounting GoPro camera is now officially released. CL35 is improved and developed on the basis of CL30. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with VISTA HD image tr

GEPRC GEP-CL35 Cinewhoop 3.5

Summary：
The CineLog35 Frame developed by CEPRC for mounting GP camera is now officially released.
CL35 is improved and developed on the basis of CL30. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with VISTA HD image transmission.The propeller guard adopts an integrated design, and the overall structure is firmer.Upgrade the power system, choose the 12mm x 12mm motor hole position, compared to CL30, it can install a larger 15-18-20 series motor, with a 3.5-inch propeller, it has a stronger power output. Improve the damping rings, the shooting effect is more stable and clearer.It has an stronger mounting compatibility, you can use 3D prints to install the full size GP8、GP9、GP10 camera or use the base to install naked camera GP8, Insta 360 GO2 and Caddx Peanut cameras.
We pursue lighter body weight, better flying feel, and more extended functions.

Specification:

 	Model: GEP-CL35
 	Motor to Motor: 142mm
 	Top plate: 2.5mm
 	Bottom plate: 2.0mm
 	Arm Plate:3.5mm
 	FC mounting hole: 25.5mm x 25.5mm
 	VTX hole position: 20mm x 20mm
 	Motor hole position: 12mm x 12mm
 	Camera installation space: 14~19mm
 	Propeller guard internal diameter: 95mm
 	Suitable propeller size: 3.5 inch propeller
 	Dimension: 203mm x 203mm x 42mm（Include propeller guard）
 	Weight:130.7g（Include propeller guard,GP camera camera mount,3D printings）

Feature:

 	
Integrated protection guard design, the overall structure is firmer and durable.

 	
Improve the damping rings, the shooting effect is more stable and clearer.

 	
CineLog35 has a great mount compatibility, you can install GP10, GP9, GP8, or Naked camera GP8,Insta 360 GO2 camera and Caddx Peanut camera.

 	
12mm x 12mm motor holes can be installed with 15-18-20 motors, and the power output is strong with 3.5-inch propellers.

 	
The design of open holes on the side of the propeller guard greatly reduces the noise during flight.

 	
Independent receiver cabin,and binding is convenient and fast.


Include:

 	1 x Top Plate 2.5mm
 	1 x Arm Plate 3.5mm
 	1 x Bottom Plate 2.0mm
 	2 x Propeller guards
 	1 x Power cable combination
 	1  x  Screw combination
 	1  x  Screwdriver combination
 	1  x  3D Print mountings combination
 	1 x Other Parts

Summary： The CineLog35 Frame developed by CEPRC for mounting GP camera is now officially released. CL35 is improved and developed on the basis of CL30. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with VISTA HD image [...]

GEP-CL35 Frame - GEPRC

GEP-CL35 Frame

The&nbspCineLog35&nbsphas improved upon the basis of the CineLog30. Featuring an integrated protection guard design, the overall structure is firmer and durable.

The CineLog35 has improved upon the basis of the CineLog30. Featuring an integrated protection guard design, the overall structure is firmer and durable.

GEPRC Cinelog 35 3.5" GEP-CL35 CineWhoop - Frame Kit

GEPRC Cinelog 35 3.5&quot GEP-CL35 CineWhoop - Frame Kit

Camera Size

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 

FPV Cameras

GEPRC GEP-CL30 CineLog 30 3" Frame

Summary：
The latest 3-inch rack CL30 developed by GEPRC is now officially released.
CL30 is improved and developed on the basis of CL25. It continues the 26.5x26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the market. The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades. Improved the shock absorption design of the damping platform to provide more stable shooting effect.Ultra-light body weight. Naked camera GP8 and Insta 360 Go2 camera can be installed with GP camera mount.
We pursue lighter body weight, better flying feel, and more extended functions frame.

Specification:

 	Brand: GEPRC
 	Model: GEP-CL30
 	Motor to Motor: 126mm
 	Top plate: 2.0mm
 	Bottom plate: 2.0mm
 	Arm Plate3.0mm
 	FC mounting hole: 25.5mm x 25.5mm
 	VTX hole position: 20mm x 20mm
 	Motor hole position: 9mm x 9mm
 	Camera installation space: 14~19mm
 	Propeller guard internal diameter: 79mm
 	Suitable propeller size: 3 in propeller
 	Dimension: 180mm x 180mm x 38mm（Includes propeller guard）
 	Weight:62.6g（Includes propeller guard, GP camera mount, 3D printings）

Feature:

 	
Small size, light weight, good flying feel.

 	
Improved the shock absorption design of the damping platform to provide a more stable shooting effect.

 	
The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades.

 	
Naked camera GP8 and Insta 360 Go2 camera can be installed with GP camera mount.

 	
A 3D print is designed for the receiver to facilitate the installation and binding of the receiver.


Include:
Carbon Plate:

 	1 x Top Plate 2.0mm
 	1 x Arm Plate 3.0mm
 	1 x bottom Plate 2.0mm

Screws:

 	2 x Knurled nut M2
 	4 x Aluminum Column M2x3.5x25
 	2 x M2x4mm cup head screws
 	28 x M2x6.5mm round head screws
 	10 x M2x8mm round head screws
 	7 x M2x9mm round head screws
 	4 x M2x10mm round head screws
 	1 x M2x12mm cup head screw
 	4 x M2x16mm cup head screws
 	1 x M2 Rivet nut
 	4 x M2 Lock nuts
 	8 x M2 Iron nuts
 	8 x M2 * 6.5mm damping rings
 	9 x damping platform rings

3D Printings:

 	1 x 19x19mm Camera Mount
 	1 x VTX Antenna Mount
 	1 x TBS T-shaped Antenna Mount
 	1 x TBS NanoRX Mount
 	1 x Camera Protector

Injection Parts:

 	6 x 3 in Propeller Guard
 	1 x GP Camera Mount

Other Parts:

 	4 x EVA Damping Ring of Guards
 	2 x 3M Double Tapes
 	2 x Silicone Pads
 	2 x Landing Pads
 	1 x M15x200mm Battery Strap
 	1 x M15x150mm Battery Strap
 	1 x L-shaped (1.5mm)
 	1 x Antenna Tubes

Summary： The latest 3-inch rack CL30 developed by GEPRC is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the [...]

GEP-CL30 Frame Kits - GEPRC

GEP-CL30 Frame Kits

framesThe latest 3-inch rack CL30 developed by GEPU is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the mark

GEPRC GEP-CL30 Cinewhoop 3

This&nbspGEP-CL30&nbspFrame kit&nbspis for the&nbspGEPRC CineLog30&nbspcinewhoop.

This GEP-CL30 Frame kit is for the GEPRC CineLog30 cinewhoop.

GEPRC CineLog 30 3" GEP-CL30 Frame Kit

GEPRC CineLog 30 3&quot GEP-CL30 Frame Kit

iFlight

iFlight ProTek35 3.5" HD Cinewhoop Frame

After our very popular 3inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, iFlight was trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.  iFlight's all-new 3.5inch project is finally ready for all you content creators or those

ProTek35 HD CineWhoop Frame Kit

This frame kit is for the&nbspiFlight ProTek35 HD&nbspCinewhoop.

This frame kit is for the iFlight ProTek35 HD Cinewhoop.

iFlight ProTek35 3.5" HD Cinewhoop Frame Kit

iFlight ProTek35 3.5&quot HD Cinewhoop Frame Kit

Diatone

Diatone Roma L3 3" Micro Frame

DIATONE

This deadcat-esque frame is perfect for those of you who are looking to build a smooth flying cruiser that keeps props out of view.
Throw in a 20x20 stack or a nice AIO for this frame.
Need spares? Check out our Diatone Roma L3 Collection.
Check out the rest of our Micro Frame Kits and our Diatone products!
Specifications

Prop Size: 3inch
FC Mounting: 20×20/26.5×26.5mm（M2）
Motor Mounting: 9mm/12mm
Camera Spacing: 20mm
Top Plate: 1.5mm
Medium Plate: 1.5mm
Bottom Plate: 1.5mm
Arm：3mm
Aluminum alloy：7075
carbon fiber: T300 3K
Wheelbase：147mm
Weight：43g

Includes

1x Diatone Roma L3 3" Micro Frame


This deadcat-esque frame is perfect for those of you who are looking to build a smooth flying cruiser that keeps props out of view. Throw in a 20x20 stack or a nice AIO for this frame. Need spares? Check out our Diatone Roma L3 Collection. Check out the rest of our Micro Frame Kits and our Diatone products! Specificati

Diatone's newest micro-frame uses a deadcat configuration that keeps propellers out of view while you cruise!

Diatone Roma L3 3" Frame Kit

Diatone Roma L3 3&quot Frame Kit

The Roma L3 from Diatone is a freestyle quad with an ultra resistant design.  Check out our entire Roma L3 Collection with Replacement Parts! Check out all our Frames, and the rest of our Diatone Products! Specifications: Wheelbase ：147mm Weight ：43g Prop Size ：3inch FC Mounting: 20×20/26.5×26.5mm（M2） Motor Mounting:9m

Diatone Roma L3 3inch Frame Kit

DiatoneUSA

This deadcat-esque frame is perfect for those of you who are looking to build a smooth flying cruiser that keeps props out of view.
Throw in a 20x20 stack or a nice AIO for this frame.
Need spares? Check out our Diatone Roma L3 Collection.
Check out the rest of our Micro Frame Kits and our Diatone products!
Specifications

Prop Size: 3inch
FC Mounting: 20×20/26.5×26.5mm（M2）
Motor Mounting: 9mm/12mm
Camera Spacing: 20mm
Top Plate: 1.5mm
Medium Plate: 1.5mm
Bottom Plate: 1.5mm
Arm：3mm
Aluminum alloy：7075
carbon fiber: T300 3K
Wheelbase：147mm
Weight：43g

Includes

1x Diatone Roma L3 3&quot Micro Frame


Diatone Roma L3 3" Micro Frame from WREKD Co.

Diatone Roma L3 3

Hyperlite

Hyperlite Floss 3.0 LITE Race 5" Frame

PyroDrone

The Floss 3.0 our most selling race frame ever went on diet!This is the LITE version of the Floss 3.0 which is pretty much identical to it's bigger versionother than all the parts are shrunk down saving around 10 GRAMS! The Floss 3.0 LITE is designed FOR racers BY racers as the next evolution of the most popular racing frame.Based around a high quality, anodized 7075 aluminum core, the frame features sandwich plates and individual,interlocking, easy to change arms to prevent arm wiggle along with a host of other modern features (and goodies!).Due to the tight space of the frame the included camera mounts need to be flipped outto give you enough room between the camera connector and the stack.

59.5g WITH hardware
Soft edge 5mm carbon arms to achieve goals of chamfering without loss of streghth
Machined channels in the aluminum plate prevent arm wiggle
Arms can be easily removed with only 2 screws
Countersunk bottom plate screws
Allows for 20x20 ONLY
Up to 85+ degrees of tilt

Also includes:

1 x Spare arm
3M anti slip battery pad
TPU micro FPV camera mount
TPU SMA mount


The Floss 3.0 our most selling race frame ever went on diet!This is the LITE version of the Floss 3.0 which is pretty much identical to it's bigger versionother than all the parts are shrunk down saving around 10 GRAMS! The Floss 3.0 LITE is designed FOR racers BY racers as the next evolution of the most popular racing

Hyperlite Floss 3.0 Lite Race 5" Frame

The Hyperlite Floss 3.0 went on diet! It's very identical to the&nbspHYPERLITE FLOSS 3.0 Race Frame (5 Inch)&nbspversion, other than the parts being shrik by 10g!

The Hyperlite Floss 3.0 went on diet! It's very identical to the HYPERLITE FLOSS 3.0 Race Frame (5 Inch) version, other than the parts being shrik by 10g!

Hyperlite Floss 3.0 LITE Race Frame - 5"

Hyperlite Floss 3.0 LITE Race Frame - 5&quot

Hyperlite Floss 3.0 LITE Race Frame 

TBS Source PodRacer 5" Racing Frame

Team BlackSheep

The SOURCE PODRACER is an ultralight racing frame, made for speed addicts and grassroots fpv racers

TBS Source PodRacer 5&quot Racing Frame

The SOURCE PODRACER is a ultralight racing frame, made for speed addicts and grassroots fpv racers. It is designed to maximize speed and minimize drag. It fits and protects all the current toothpick-style FPV components and is optimized for light weight. The SOURCE PODRACER is your perfect race winner, and is recommended for pro racing pilots only.
ABOUT THE PROJECT
The SOURCE PODRACER project is a collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame in order to compete in an increasingly predatory marketplace.
The hope is for this frame to enable broad access to FPV thanks to a low price point, great documentation, and wide availability of compatible parts and accessories, without violating other people&#39s intellectual property.
GET INVOLVED!

Project discussion: Coming Soon
Project files: Coming Soon
3D Printed files on Thingiverse: Coming Soon
3D Printed Parts (STL) Coming Soon

PACKAGE CONTAINS:

1 x Carbon Frame Set
1 x Printed Pod
1 x Screw Set

TECHNICAL SPECIFICATIONS:


Wheelbase: 200mm

Stacking Mounting Plate:  1.5mm

Bottom Plate: 1.5mm

Arms: 5mm thick

Stack Mout:  19 x19mm, 26x26mm, 20x20mm

Motor Mount: 12 x 12mm &ampamp 9 x 9mm

Frame weight: 47g

HARDWARE:

8 x M2x10mm Countersunk screws
4 x M2x12mm Countersunk screws
2 x M2x6mm Socket head screws
24 x M2x10mm Socket screws
1 x 1.5mm Carbon Fiber Top Plate
1 x 1.5mm Carbon Fiber Bottom Plate
2 x 5mm Carbon Fiber Arms
Black Nylon 3D printed canopy

RECOMMENDED PARTS:
The part recommendations are put together by our engineers and pilots. We strive for reliability and high quality in all of our selections, which may cost a bit extra but allow you to enjoy the frame much more!


AIO: BetaFPV Toothpick F4 2-4S AIO Brushless Flight Controller 20A(BLHeli_S)


Motors: 1505 - 3600kv


Camera: 14*14 Nano camera


VTx: TBS Unify Pro32 Nano or TBS Unify Pro Nano


Antenna: TBS Triumph Pro (U.FL)  *Strongly recommended, the pod is designed for this antenna.

Props:  5&quot - HQ Durable Prop T5

Battery: 450 - 600mAh, 3-4S


TBS Source Podracer: The ultimate ultralight racing frame for speed addicts & grassroots fpv racers. Maximize speed & minimize drag. Race to win!

TBS Source Podracer 5" Ultralite Racing Frame from WREKD Co.

TBS Source Podracer 5

TBS Source Podracer 5" Ultralite Racing Frame

WREKD Co.

The SOURCE PODRACER is a ultralight racing frame, made for speed addicts and grassroots fpv racers. It is designed to maximize speed and minimize drag. It fits and protects all the current toothpick-style FPV components and is optimized for light weight. The SOURCE PODRACER is your perfect race winner, and is recommended for pro racing pilots only.
ABOUT THE PROJECT
The SOURCE PODRACER project is a collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame in order to compete in an increasingly predatory marketplace.
The hope is for this frame to enable broad access to FPV thanks to a low price point, great documentation, and wide availability of compatible parts and accessories, without violating other people's intellectual property.
GET INVOLVED!

Project discussion: Coming Soon
Project files: Coming Soon
3D Printed files on Thingiverse: Coming Soon
3D Printed Parts (STL) Coming Soon

PACKAGE CONTAINS:

1 x Carbon Frame Set
1 x Printed Pod
1 x Screw Set

TECHNICAL SPECIFICATIONS:


Wheelbase: 200mm

Stacking Mounting Plate:  1.5mm

Bottom Plate: 1.5mm

Arms: 5mm thick

Stack Mout:  19 x19mm, 26x26mm, 20x20mm

Motor Mount: 12 x 12mm &amp 9 x 9mm

Frame weight: 47g

HARDWARE:

8 x M2x10mm Countersunk screws
4 x M2x12mm Countersunk screws
2 x M2x6mm Socket head screws
24 x M2x10mm Socket screws
1 x 1.5mm Carbon Fiber Top Plate
1 x 1.5mm Carbon Fiber Bottom Plate
2 x 5mm Carbon Fiber Arms
Black Nylon 3D printed canopy

RECOMMENDED PARTS:
The part recommendations are put together by our engineers and pilots. We strive for reliability and high quality in all of our selections, which may cost a bit extra but allow you to enjoy the frame much more!


AIO: BetaFPV Toothpick F4 2-4S AIO Brushless Flight Controller 20A(BLHeli_S)


Motors: 1505 - 3600kv


Camera: 14*14 Nano camera


VTx: TBS Unify Pro32 Nano or TBS Unify Pro Nano


Antenna: TBS Triumph Pro (U.FL)  *Strongly recommended, the pod is designed for this antenna.

Props:  5" - HQ Durable Prop T5

Battery: 450 - 600mAh, 3-4S


The SOURCE PODRACER is a ultralight racing frame, made for speed addicts and grassroots fpv racers. It is designed to maximize speed and minimize drag. It fits and protects all the current toothpick-style FPV components and is optimized for light weight. The SOURCE PODRACER is your perfect race winner, and is recommend

Zeez

Zeez Capish 5.5" Racing Frame

Zeez Design

The Zeez Design Capish 5.5″ Racing Frame is an excellent racing frame that is made of Japanese T700 top quality carbon and features easy to swap arms, making it easier to change props!

Zeez Design Capish 5.5" Racing Frame Kit

Zeez Design Capish 5.5&quot Racing Frame Kit

Ummagawd

Ummagawd Remix V2 FPV Freestyle Frame

Ummagawd!

The Ummagawd Remix V2 FPV Freestyle Frame by Tommy Tibajia.&nbspRETHINK. REDESIGN. REMIX V2All hardware is now countersunk flush into the carbon.New top plate design, strengthened at the corners, removed the arm pockets and added strap slots.5mm arms now standard.New stronger hatch sled with beefier sides and strengthened at the attachment locations.Compatible with both full size and 20x20mm mounting flight controllers.

The Ummagawd Remix V2 FPV Freestyle Frame by Tommy Tibajia. RETHINK. REDESIGN. REMIX V2

All hardware is now countersunk flush into the carbon.
New top plate design, strengthened at the corners, removed the arm pockets and added strap slots.


Hyperlite Floss 3.0 Race 5" Frame

Pyro-Drone

The Hyperlite Floss 3.0 quadcopter frame is designed FOR racers BY racers as the next evolution of one of the most popular racing frames. 

HYPERLITE FLOSS 3.0 Race Frame (5 Inch)

Hyperlite Floss 3.0 Race Frame 5

Armattan

Armattan Gecko 3" Micro Frame

Armattan Gecko It's innovative.  It has grip.  It's got style.  And best of all?  It's Armattan. The Gecko is the latest addition to Armattan's family of mini-freestyle frames.  Designed around the best principals that brought the Japalura and the Rooster to the front of their fields, this frame gives you the best prot

Armattan Gecko 3

Replacement main plate for ARMATTAN GECKO 3" Frame

The Gecko is the latest addition to Armattan's family of mini-freestyle frames.  Designed around the best principals that brought the Japalura and the Rooster to the front of their fields, this frame gives you the best protection and quality that the multirotor kingdom has to offer.

The Gecko is the latest addition to Armattan's family of mini-freestyle frames.  Designed around the best principals that brought the Japalura and the Rooster to the front of their fields, this frame gives you the best protection and quality that the

Armattan Gecko 3" Frame

Armattan Gecko 3&quot Frame

Lumenier QAV-R 2 Slam Freestyle Quadcopter Frame

The QAV-R 2 Slam is the worthy successor to the original QAV-R that many pilots fell in love with back in 2015. The QAV-R keeps many design elements from the original but adds modern compatibility and features that are preferred by today's pilots.Whether it's on the race course or shooting HD footage zipping down a mountainside, you'll feel like this frame was made just for you.

The QAV-R 2 Slam is the worthy successor to the original QAV-R that many pilots fell in love with back in 2015. The QAV-R keeps many design elements from the original but adds modern compatibility and features that are preferred by today's pilots.
W

Lumenier QAV-PRO Mega Whoop 7" Frame Kit - Cinequads Edition

The Lumenier QAV-PRO Mega Whoop - Cinequads Edition is a professional 7" prop-guarded cinematic drone that is capable of handling large payloads. This advanced quadcopter is equipped with durable carbon fiber and aluminum components, providing complete propeller safeguarding. This frame is specifically designed to accommodate your cinema camera, and with the addition of the optional cinema camera mounting kit and X8 upgrade kit, this setup has a lot to offer and ensures an exceptional QAV-PRO experience. This whoop is a great tool to add to your cinematic arsenal and can be used in many scenarios where additional safety and stability are needed.
Check out the rest of our Lumenier products or the rest of our 7" drone frames.CINEQUADSLumenier has once again teamed up with Cinequads… the world-renowned German FPV cinematography company. Cinequad’s input and knowledge from having many years in the professional FPV industry have been highly valuable in the creation of industry-leading professional FPV products. Together, Lumenier and Cinequads are releasing the QAV-PRO line… which is the composition of professional FPV cinematic drones. These quads are tailored to get that perfect shot. Lumenier has pushed the limits with these drone kits by incorporating high-tech designs with high-quality materials.Combining Cinequads' professional experience and optimized workflow with Lumenier's high-quality design and manufacturing, we are excited to bring you the next professional class of FPV Cine drones... the Lumenier QAV-PRO line.


Features

Additional XT30 connectors allow cinema cameras to be powered by the drone to reduce the overall weight
Supports cinematic cameras, such as the RED Komodo and DSLR cameras.
Designed in Germany by Cinequads in collaboration with Lumenier
Configured for camera centering, allowing even weight distribution
Designed for internal electronic mounting for added protection
Switchable camera plates for 19x19 or 20x20 FPV cameras
Aluminum XT90 connector mount for cinematic batteries
Rear, front, or center cinema camera mounting options
Aluminum rear-end structural brace with LiPo strap
Symmetric motor arms with minimal masking
Durable carbon tubes with nylon landing feet
Organized aluminum cable mounting system
Vertical aluminum Crossfire antenna mount
Specially designed 4mm O3 heatsinks
50x50mm internal LiPo battery cage
Ducted for indoor/outdoor safety
Isolated O3 Camera Mount
Universal GoPro Mount
Pusher style frame
TPU GPS Mount



SWITCHABLE FPV CAMERA MOUNTING SYSTEMThe QAV-PRO Mega Whoop was specially designed with the O3 unit in mind. The increased airflow design, heatsink mounts, and aluminum camera mounts provide the perfect setup to utilize your O3 Unit in an optimized way, and the isolated O3 camera mount helps with stabilization. This unique camera mounting system also allows the pilot to use either 19X19 or 20X20mm FPV cameras. This camera mounting system can be flipped to allow space for your personal camera needs. The combination of aluminum brackets and durable carbon plates keeps your camera secure and safe.

O3 HEATSINK MOUNTSThese custom O3 mounts feature a heatsink design to reduce temperatures during flight and provide a longer flight time while keeping your O3 secure.

REAR FRAME FEATURESThe rear of this frame is equipped with multiple aluminum features. The rear brackets have secure slots for LiPo straps to ensure your battery does not move in flight, and the battery cage holds up to 50x50mm batteries. The mounts for the Crossfire antenna and XT90 connectors ensure your components stay safe in place during flights.

DUCTED FRAME DESIGN WITH SYMMETRIC MOTOR ARMSThe QAV-PRO Mega Whoop gives you the option to fly this larger rig with ducted protection. Flying close to people or objects that you need a little more security? No problem! Protect those props and motors while providing safety to spectators. The symmetric motor arms have minimal masking of the prop surface thanks to double-decker-style arms. This design provides a minimal overall height for better aerodynamics.

XT30 CONNECTORS FOR CINEMA CAMERAThese XT30 connectors allow you to power your cinema camera through the drone's battery, eliminating the need for a camera battery, and reducing overall weight for better flight performance.

CLEAN CABLE MANAGEMENTThe integrated cable management system on this frame leaves every FPV pilot with a professional, clean build. Slots for two zip ties are built into the frame, as well as aluminum cable brackets that keep your power cables centered and secure on the build.



Specifications

Connector: XT60 (1) for Battery + XT30 (2) for Cinema Cameras
Model: Lumenier QAV-PRO Mega Whoop 7" Cinequads Edition
FPV Camera Mounting: 20x20 or 19x19
VTX/AIO Mounting Patterns: 25x25mm
Antenna Mount Material: Aluminum
Motor Mounting Pattern: 9x9mm
Standoffs: M2x16mm Aluminum
O3 Heatsink Mounts: Aluminum
Carbon Fiber Thickness: 3mm
Dimensions: 470x400x60mm
Camera Mounts: Aluminum
Cable Mounts: Aluminum
Camera Plates: Carbon
Weight: Approx. 750g

Lumenier QAV-PRO Mega Whoop Manual
Includes

1x Lumenier QAV-PRO Mega Whoop 7" Cinequads Edition Frame Kit



1x Aluminum QAV-PRO Universal Camera Mount Base
1x Lumenier QAV-PRO Mega Whoop Bottom Plate
1x Lumenier QAV-PRO Mega Whoop Middle Plate
1x Lumenier QAV-PRO Mega Whoop Top Plate
1x USB-C to 90° USB-C Extension Cable
1x 4mm O3 Mounting Heatsink Kit
2x Aluminum Camera Mount
2x XT30 3D Printed Mount
1x Lumenier LiPo Strap
1x Foam Battery Shield
4x Rubber Grommets
4x M2 Steel Hex Nut
1x XT60 Connector
2x XT30 Connector
1x Antenna Mount
4x Landing Feet
1x Hardware Kit
1x XT60 Mount
6x Standoffs
6x Zip Ties



The Lumenier QAV-PRO Mega Whoop - Cinequads Edition is a professional 7" prop-guarded cinematic drone that is capable of handling large payloads. This advanced quadcopter is equipped with durable carbon fiber and aluminum components, providing complete propeller safeguarding. This frame is specifically designed to acco

Lumenier QAV-PRO Mega Whoop Cinequads Edition 7" Frame Kit

Lumenier QAV-PRO Whoop 2.5" Frame Kit - Cinequads Edition

The Lumenier QAV-PRO Micro Whoop - Cinequads Edition is a versatile 2.5" micro-sized FPV quadcopter that is designed to be small and agile. Featuring full propeller protection with premium carbon fiber, while carrying your HD camera for the ultimate micro FPV cinema experience.Lumenier has once again teamed up with Cinequads, founded by the world-renowned FPV pilot Phil Freybott! Now bringing you the ultimate micro cinematography whoop. Phil has many years of experience shooting professionally with FPV drones on TV commercial sets, and movies. You can find his work showcased with automotive brands like Porsche and Mercedes.Combining Cinequads' professional experience and optimized workflow with Lumenier's high-quality design and manufacturing, we are excited to bring you the next professional class of FPV Cine drones... the Lumenier QAV-PRO line.
Check out the rest of our Lumenier products or the rest of our 2.5" Micro Frames.
Features

Designed by Lumenier in collaboration with Cinequads
Supports HD Action Camera Mounting
Great for Professional Cinematic Use
Designed for both Analog and HD
Molded Foam Bumper Protection
Pusher Style Frame
Ultra-lightweight





ADDED PROTECTION WTH MOLDED FOAM BUMPERSThe QAV-PRO Micro Whoop gives you the option to fly with only the Carbon Fiber frame, or with added protection provided by the snap-on foam bumpers. Flying close to people or objects that you need a little more security? No problem! Simply pop on the foam pads in seconds and you're good to go. When you're done you can take them back off and fly again with just the carbon guards. So simple!SUPPORTS GOPRO / HD CAMERA MOUNTINGWant to add 4k buttery smooth video recording to your QAV-PRO? No problem! the frame is designed to carry a GoPro style camera with a dedicated camera mount on top. This allows a variety of cameras and 3-D prints to securely hold the HD camera in place making sure you get the perfect shot!DESIGNED FOR BOTH ANALOG AND HDThe QAV-PRO Micro Whoop frame was designed from the ground up to be very versatile and allow many different configurations with the same design. This one airframe design fits 20x20 stacks, 25.5x25.5 toothpick AIO boards, and Caddx Vista digital HD system. This frame has mounting points for an antenna, camera, receiver, transmitter, and more. Now you can fly in full digital HD in an incredibly small package!PUSHER STYLE FRAMEThe Lumenier QAV-PRO Micro Whoop airframe design supports a pusher configuration. it was found to have 15-20% more flight time and an even better throttle response. Many "pusher" style frames struggle to easily take off from the ground since their props are often resting on the surface, but with the QAV-PRO Micro Whoop... it's no problem since the entire prop is surrounded by carbon fiber. This gives you plenty of clearance to take off and land without any issue.ULTRA-LIGHTWEIGHTWith an all-up weight of just 53g, this airframe is top in class. It has the perfect balance of durability and protection that you need, without any extra dead weight that you don't. The body is made up of ultra-strong 3K carbon fiber. Combined with custom light-weight quick-swap battery straps and M2 hardware, this kit is the perfect 2.5" setup.
Specifications

Weight: 53g (66g with bumpers and lipo straps)
Dimension: 180mm x 155mm x 53mm
Material: 2mm Quasi-Isortropic Japanese Carbon Fiber (Matte Finish)
Motor Bolt Pattern: 9x9mm


Includes

1x Lumenier QAV-PRO Micro Whoop Cinequads Edition 2.5" Frame Kit



1x Hardware Set (Steel M2 Screws, M2 Stack Screws and Spacers, Aluminum Standoffs, Rubber O-rings, Nuts)
1x 3D Printed Universal Camera Mount Base
2x 1mm Carbon Fiber Camera Side Plate
1x 2mm Carbon Fiber Bumper Plate
1x 2mm Carbon Fiber Motor Plate
1x Foam Battery Pad
4x Foam Bumpers



The Lumenier QAV-PRO Micro Whoop - Cinequads Edition is a versatile 2.5" micro-sized FPV quadcopter that is designed to be small and agile. Featuring full propeller protection with premium carbon fiber, while carrying your HD camera for the ultimate micro FPV cinema experience.Lumenier has once again teamed up with Cin

Lumenier QAV-PRO Whoop Cinequads Edition 2.5" Micro Frame Kit

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Motor Stator Size

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 