FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

NewBeeDrone

NewBeeDrone Cockroach V3 65mm Ultra Light Frame

NewBeeDrone Cockroach V3 65mm Brushless Ultra Light Frame
 

All NewBeeDrone Cockroach Frames are eligible for unlimited replacements. Find out more information here. 
 
Introducing the groundbreaking Cockroach True65 Super-Durable Brushless Frame, a revolutionary advancement in design and performance for Tiny Whoop style quads. Building upon our expertise and success with previous models, we have surpassed all expectations to create the market's lightest True65 size whoop frame, weighing in at an astonishing 2.8g, while maintaining exceptional strength and durability.
Taking innovation to new heights, we have integrated a dual flight controller mounting system, inspired by the popular Cockroach75 frame. Now, not only can you mount a flight controller, but also a digital vtx on the frame, providing unparalleled control and compatibility options.
Our dedicated team of engineers left no stone unturned in perfecting every detail of this frame. Utilizing high precision molds, we have achieved best-in-class detailing, setting an industry standard that surpasses both our previous versions and competitors' products.
With its Traditional Looks and Geometry, you can rely on the familiar flight characteristics you love, while enjoying seamless compatibility with the Beebrain and most other popular flight controllers.
But there's even more - we've prioritized ease of use and affordability. Meticulous fine-tuning of key tolerances ensures hassle-free installation and removal, making it a breeze for you to get back to flying.
Crafted from a special Polypropylene material, this frame strikes the perfect balance between lightweight and durable. Struts and essential support components have undergone a complete redesign to optimize stress distribution during crashes and falls, guaranteeing that your quad can withstand the toughest challenges.
Experience the Cockroach True65 Super-Durable Brushless Frame, where innovation meets practicality, and performance meets affordability. Unleash the full potential of your Tiny Whoop style quad with the market's best frame, meticulously crafted to elevate your flying experience to new heights.
Configuration: This frame can be used with or without the carbon fiber base. When used with the carbon fiber base (weighing around 1g, bringing the total weight with the frame to 3.8g), it exhibits significantly less frame resonance and noise, making it ideal for freestyle and normal flying. For racers seeking the lightest setup, removing the carbon fiber frame shaves off weight, ensuring an agile and nimble flight experience.
Spec:Size: True 65mm frame
Now comes with two type of materialMaterial: Polypropylene Material - 2.9g                Polycarbonate Material - 3.95g
Both frame are pretty similar on durability. Polypropylene are soft and Polycarbonate are harder Flight Controller Mount: 25.5x25.5 whoop size flight controller (BeeBrain) x2 (Top and bottom)Motor Mount: Tri-screw lock base with M1.4 hole 
Include:1x Cockroach V3 Brushless Ultra Light Frame 15x M1.4 2mm Screws Phillips-head1x Sheet of EVA motor base foam with sticker (10Pcs)
 
Motor Mount base

NewBeeDrone Cockroach V3 65mm Brushless Ultra Light Frame   All NewBeeDrone Cockroach Frames are eligible for unlimited replacements. Find out more information here.    Introducing the groundbreaking Cockroach True65 Super-Durable Brushless Frame, a revolutionary advancement in design and performance for Tiny Whoop sty

NewBeeDrone Cockroach V3 65mm Brushless Ultra Light Frame

NEWBEEDRONE

Introducing the V3 of the Cockroach from NewBeeDrone!  See what they have to say about their new upgraded whoop frame!
The groundbreaking Cockroach True65 Super-Durable Brushless Frame, a revolutionary advancement in design and performance for Tiny Whoop style quads. Building upon our expertise and success with previous models, we have surpassed all expectations to create the market's lightest True65 size whoop frame, weighing in at an astonishing 2.8g, while maintaining exceptional strength and durability.Taking innovation to new heights, we have integrated a dual flight controller mounting system, inspired by the popular Cockroach75 frame. Now, not only can you mount a flight controller, but also a digital vtx on the frame, providing unparalleled control and compatibility options.Our dedicated team of engineers left no stone unturned in perfecting every detail of this frame. Utilizing high precision molds, we have achieved best-in-class detailing, setting an industry standard that surpasses both our previous versions and competitors' products.With its Traditional Looks and Geometry, you can rely on the familiar flight characteristics you love, while enjoying seamless compatibility with the Beebrain and most other popular flight controllers.But there's even more - we've prioritized ease of use and affordability. Meticulous fine-tuning of key tolerances ensures hassle-free installation and removal, making it a breeze for you to get back to flying.Crafted from a special Polypropylene material, this frame strikes the perfect balance between lightweight and durable. Struts and essential support components have undergone a complete redesign to optimize stress distribution during crashes and falls, guaranteeing that your quad can withstand the toughest challenges.Experience the Cockroach True65 Super-Durable Brushless Frame, where innovation meets practicality, and performance meets affordability. Unleash the full potential of your Tiny Whoop style quad with the market's best frame, meticulously crafted to elevate your flying experience to new heights.
Configuration:This frame can be used with or without the carbon fiber base.When used with the carbon fiber base (weighing around 1g, bringing the total weight with the frame to 3.8g), it exhibits significantly less frame resonance and noise, making it ideal for freestyle and normal flying. For racers seeking the lightest setup, removing the carbon fiber frame shaves off weight, ensuring an agile and nimble flight experience.
Check out the rest of our micro frames as well as the rest of our NewBeeDrone selection.  
Features

All NewBeeDrone Cockroach Frames are eligible for unlimited replacements. Find out more information here. 




Specifications

Size: True 65mm frame

Material: Polypropylene material

Weight: 2.8g

Flight Controller Mount: 25.5x25.5 whoop size flight controller (BeeBrain) x2 (Top
and bottom)

Motor Mount: Tri-screw lock base with M1.4 hole

 Includes

1x NewBeeDrone 65mm Cockroach Brushless V3 Frame Whoop Frame - Choose Color


Introducing the V3 of the Cockroach from NewBeeDrone!  See what they have to say about their new upgraded whoop frame! The groundbreaking Cockroach True65 Super-Durable Brushless Frame, a revolutionary advancement in design and performance for Tiny Whoop style quads. Building upon our expertise and success with previou

NewBeeDrone 65mm Cockroach Brushless V3 Frame Whoop Frame - Choose Color

NewBeeDrone 65mm Cockroach Brushless V3 Frame Whoop Frame - Choose Col

Introducing the NewBeeDrone Cockroach V3 65mm Cinewhoop Frame, a game-changer in Tiny Whoop style quad design. 

NewBeeDrone Cockroach V3 65mm Cinewhoop Frame

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

Axis Flying

AxisFlying CineON C35 V2 Cinewhoop 3.5" Frame Kit

AXIS FLYING




The Axisflying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, minimal noise, and up to 9 minutes of flying time.



Be sure to check out all our 3.5" frames, and all our Axis Flying Products!
Features

Better wind resistance for smoother footage - C224 Motor, more torque and power

Provide adequate security for the whoop - High performance 40A/F722 AIO

No jello for more stable footage - Triangular shock-absorbing gimbal

The strength has been improved ,don't worry about crash - The frame is fixed with 6 customized M3-7075 standoffs

Reducing the risk of lost drone - The drone and the frame kit are equipped with beeper as standard 

Newly designed ducted aerodynamic layout to effectively reduce flight noise

Independent receiver storage, convenient for binding

Support 12mm/9mm motor mounting

27mm height, compatible with most VTXs


Specifications

Wheelbase: 152mm
Weight: 140.7g
Bottom plate thickness: 2mm
Top plate thickness: 3.5mm
Carbon plate material: T700
Bottom-to-top distance: 27mm
Motor mounting: 9x9mm &amp 16x16mm
VTX mounting: 20mm/25.5mm (M2)
Stack mounting: 20mm/25.5mm (M2)

Camera Space: 14~20mm
Prop size: Max 3.5mm 

Includes

1x AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard


The Axisflying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, m

AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard

AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray P

AxisFlying




The Axisflying CineON C35 V2 Cinewhoop 3.5&quot Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, minimal noise, and up to 9 minutes of flying time.



Be sure to check out all our 3.5&quot frames, and all our Axis Flying Products!
Features

Better wind resistance for smoother footage - C224 Motor, more torque and power

Provide adequate security for the whoop - High performance 40A/F722 AIO

No jello for more stable footage - Triangular shock-absorbing gimbal

The strength has been improved ,don&#39t worry about crash - The frame is fixed with 6 customized M3-7075 standoffs

Reducing the risk of lost drone - The drone and the frame kit are equipped with beeper as standard 

Newly designed ducted aerodynamic layout to effectively reduce flight noise

Independent receiver storage, convenient for binding

Support 12mm/9mm motor mounting

27mm height, compatible with most VTXs


Specifications

Wheelbase: 152mm
Weight: 140.7g
Bottom plate thickness: 2mm
Top plate thickness: 3.5mm
Carbon plate material: T700
Bottom-to-top distance: 27mm
Motor mounting: 9x9mm &ampamp 16x16mm
VTX mounting: 20mm/25.5mm (M2)
Stack mounting: 20mm/25.5mm (M2)

Camera Space: 14~20mm
Prop size: Max 3.5mm 

Includes

1x AxisFlying CineON C35 V2 Cinewhoop 3.5&quot Micro Frame Kit - Clear Gray Prop Guard


AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard from WREKD Co.

AxisFlying CineON C35 V2 Cinewhoop 3.5











The AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit is a powerful and lightweight piece of engineering, built for maximum durability and performance. It has a unique 4-screw blade guard swap for easy maintenance, and supports 19x19mm camera mounting for DJI O3 cameras. Featuring CNC aluminum camera side plates, and a 3D printed GPS mount on the tail, this kit is an all-in-one solution for advanced aerial photography.
Choose the color of your prop guards between blue-green clear and grey clear!










Check out our other 3" frames and all our Axis Flying Products!
Features

Fully upgraded redesign and new appearance
Camera side plates have been upgraded to CNC aluminum parts
Compatible with DJI O3 Cameras 
Supports cameras with a 19x19mm mounting 
The tail has been equipped with a 3D printed GPS mount


 


Specifications

Wheelbase: 138mm
Top plate: 3.2mm
Bottom plate: 2mm
Arm: 3.2mm
FC mounting holes: 25.5mm x 25.5mm M2 / 20mm x 20mm M2
VTX mounting holes: 25.5mm x 25.5mm / 20mm x 20mm 
Motor mounting holes: 9mm x 9mm / 12mm x 12mm
Camera installation space: 14-20mm
Suitable propeller size: 3″propeller
Weight: 127g (without TPU)

Includes


1x AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit
1x Battery Ant-Slip Pad
1x 3D Printed Parts Set
1x Hardware Set

1x Main Plate
2x LiPo Strap
1x Top Plate



The AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit is a powerful and lightweight piece of engineering, built for maximum durability and performance. It has a unique 4-screw blade guard swap for easy maintenance, and supports 19x19mm camera mounting for DJI O3 cameras. Featuring CNC aluminum camera side plates, a

AxisFlying CineON C30 V2 Cinewhoop 3" Micro Frame Kit - Choose Color

GEPRC

GEPRC Racer 5" Frame Kit

When you&#39re chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5&quot Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight controller attaches easily to 20x20mm/25.5x25.5mm/30.5x30.5mm mounting holes, and motors attach to the 16x16mm. 












When the conventional FPV drone cannot satisfy the pursuit of speed in FPV racing, then this is the frame for you!
Choose between having the aluminum plate colored with red or silver accents!












Be sure to check out all our 5&quot frames,  and our GEPRC products!










Specifications

Model: RACER FPV Frame

Frame: GEP-RACER Frame

Dimensions: 175mm×173mm

Wheelbase: 208mm

Top plate: 2.0mm

Aluminum plate: 2.0mm

Bottom plate: 2.0mm

Arm thickness: 5.0mm

Aluminum column size: M3x6x24mm

FC mounting hole: 30.5mmx30.5mm/25.5mmx25.5mm/20mmx20mm

VTX mounting hole: 20mmx20mm

Motor mounting hole: 16mmx16mm

Camera installation space: 14mm

Propeller: 5 inches

Weight: 78g ± 2g

Includes

1x Top plate
1x Bottom plate
1x Aluminum plate (Red or Titanium)
1x Camera mount
1x VTX antenna mount
1x Shark fin print
4x M3x6x24mm aluminum column
2x 20x250mm battery cable ties
2x Battery anti-skid pads
1x Screw pack
1x L-shaped screwdriver 1.5mm
1x L-shaped screwdriver 2mm


When you're chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5" Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight cont

GEPRC Racer 5" Frame Kit - Choose Your Color from WREKD Co.

GEPRC Racer 5

GEPRC Racer 5" Frame Kit - Choose Your Color

When you're chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5" Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight controller attaches easily to 20x20mm/25.5x25.5mm/30.5x30.5mm mounting holes, and motors attach to the 16x16mm. 












When the conventional FPV drone cannot satisfy the pursuit of speed in FPV racing, then this is the frame for you!
Choose between having the aluminum plate colored with red or silver accents!












Be sure to check out all our 5" frames,  and our GEPRC products!










Specifications

Model: RACER FPV Frame

Frame: GEP-RACER Frame

Dimensions: 175mm×173mm

Wheelbase: 208mm

Top plate: 2.0mm

Aluminum plate: 2.0mm

Bottom plate: 2.0mm

Arm thickness: 5.0mm

Aluminum column size: M3x6x24mm

FC mounting hole: 30.5mmx30.5mm/25.5mmx25.5mm/20mmx20mm

VTX mounting hole: 20mmx20mm

Motor mounting hole: 16mmx16mm

Camera installation space: 14mm

Propeller: 5 inches

Weight: 78g ± 2g

Includes

1x Top plate
1x Bottom plate
1x Aluminum plate (Red or Titanium)
1x Camera mount
1x VTX antenna mount
1x Shark fin print
4x M3x6x24mm aluminum column
2x 20x250mm battery cable ties
2x Battery anti-skid pads
1x Screw pack
1x L-shaped screwdriver 1.5mm
1x L-shaped screwdriver 2mm


The GEPRC Racer frame combines the 7075-T6 aviation aluminum alloy splint and the high-grade T700 carbon plate CNC processing.

GEPRC Racer 5" FPV Frame Kit - Silver

GEPRC Racer 5&quot FPV Frame Kit - Silver

Lumenier

Lumenier QAV-S 2 JohnnyFPV SE 7" Frame Kit

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience.&nbsp

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. 

Lumenier QAV-S 2 JohnnyFPV SE 7” Frame Kit

LUMENIER

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only one screw per side. The frame's aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 7" frame achieves an unparalleled balance of durability and weight at 182g (frame only).Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance.
Check out the rest of our Lumenier products or the rest of our 7" drone frames.
Features

Made in Collaboration with expert FPV pilot JohnnyFPV
Frame made of High-Quality Lumenier components
Adjustable Aluminum XT60 and Accessory Mount
Backward-compatible mounting patterns
Aluminum FPV Camera Protection
Balanced Durability and Weight
Injection-Molded GoPro Mount
DeadCat Arm Configuration
O3 Compatible Mounting
Arm Braces for Rigidity
X-Lock Arm Retention



BALANCED DURABILITY AND WEIGHTThe QAV-S 2 JohnnyFPV Edition builds on the durability of its predecessor with upgraded 6mm thick arms in addition to the aluminum X-lock and FPV camera protection. At 133g (frame only - without accessories) this combination provides an industry-leading balance of weight and durability for even the most demanding applications.

X-LOCK ARM RETENTIONThe QAV-S 2 introduces a new lateral X-Lock arm system. This all-aluminum arm locking system improves the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw per side for easy transportation.

ALUMINUM FPV CAMERA PROTECTIONThe new FPV camera mounting solution offers excellent camera protection and support for various cameras through customizable carbon plates. The frame includes plates with damped mounts tested and optimized for the O3 camera and plates with mounts for a range of other camera options. If you want to create your own, the M2 mount points on the aluminum guards easily allow for custom mounts. Your imagination is the limit.

INJECTION MOLDED GOPRO MOUNTThe QAV-S 2 uses the same GoPro mount pattern used by other Lumenier frames, allowing a durable injection molded GoPro mount to attach with a single screw.

BACKWARD-COMPATIBLE MOUNTING PATTERNSFor those who still want to use printed GoPro and antenna mounts, the QAV-S 2 brings the JohnnyFPV frame into line with the mount patterns from the other QAV-S series frames. The new edition now uses the same mounting pattern and standoff placement as the other frames in the series. All previous QAV-S* mounts and Bardwell Special Edition frames will fit the JohnnyFPV Edition without modification. *Original QAV-S JohnnyFPV Special Edition mounts are no longer compatible

O3 COMPATIBLE MOUNTINGThe rear plate adds 25.5 M1.6 mount holes to mount the O3 air unit to the frame directly. The frame kit also includes a 5mm full aluminum mounting kit to allow for perfect wire routing for both the O3 air unit and a rear XT60 connector.

ADJUSTABLE ALUMINUM XT60 AND ACCESSORY MOUNTA custom rear mounting solution allows for a hard mounted XT60 connection as well as a range of accessory mounting options for antennas, GPS, and rear-facing action cameras. Adjustable angles allows for the perfect position regardless of the accessory being used. The frame kit includes plates for the injection molded GoPro mount and GPS mounts with both single and dual antenna options, as well as a single antenna only option.

FOLDING ARMSThe new lock system on the QAV-S 2 JohnnyFPV SE allows the arms to fold with only one screw per side for easy transportation. Simply remove the side screws and wedges, and you are now able to fold the arms.
Specifications

Rear Stack Dimensions: 20x20 (potentially 30x30 with adapter)
Custom Parts: 6061 Aluminum (Bronze Gold)
Standoffs: 7075 Aluminum (Bronze Gold)
Screws: Black Zinc Steel 12.9 grade
Weight: 182g (without accessories)
Middle Stack Dimensions: 30x30
Arm: 6mm 3K Carbon Fiber
Frame Size: 220mm

Lumenier QAV-S 2 JohnnyFPV Manual
IMPORTANT NOTES

The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.


Includes

1x Lumenier QAV-S 2 JohnnyFPV SE 7" Frame Kit



1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna
1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate
1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right
2x JohnnyFPV QAV-S 2 Camera Plate for Grommets
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left
1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate
1x JohnnyFPV QAV-S 2 20mm Camera Plate Right
1x JohnnyFPV QAV-S 2 20mm Camera Plate Left
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate
1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate
1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate
1x JohnnyFPV QAV-S 2 Rear Base Mount Right
1x JohnnyFPV QAV-S 2 Aluminum Guard Right
1x 14 Gauge Silicon Wire (Pair, Red and Black)
1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm
1x JohnnyFPV QAV-S 2 Rear Base Mount Left
1x JohnnyFPV QAV-S 2 Aluminum Guard Left
2x JohnnyFPV QAV-S 2 6mm Arm Wedge
2x JohnnyFPV QAV-S 2 7 Inch Arm Brace
2x JohnnyFPV QAV-S 2 7 Inch Arm Front
2x JohnnyFPV QAV-S 2 7 Inch Arm Rear
1x JohnnyFPV QAV-S 2 Split Plate Front
1x JohnnyFPV QAV-S 2 Split Plate Rear
1x Lumenier QAV-PRO Gopro Mount
2x 5mm O3 Air Unit Mount 20mm
1x JohnnyFPV QAV-S 2 Top Plate
2x Heatshrink 5mm Diameter
2x Lumenier Battery Strap
4x Knurled Standoff
1x XT60E-M (Black)
1x Hardware Set
4x Foam Pads



Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only o

Lumenier QAV-S 2 JohnnyFPV SE 5" Frame Kit

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold for convenient transportation with just one screw per side. The frame's aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 5" frame achieves an unparalleled balance of durability and weight at 133g (frame only).Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance.
Features

Made in Collaboration with expert FPV pilot JohnnyFPV
Frame made of High-Quality Lumenier components
Adjustable Aluminum XT60 and Accessory Mount
Backward-compatible mounting patterns
Aluminum FPV Camera Protection
Balanced Durability and Weight
Injection-Molded GoPro Mount
O3 Compatible Mounting
X-Lock Arm Retention



 BALANCED DURABILITY AND WEIGHTThe QAV-S 2 JohnnyFPV Edition builds on the durability of its predecessor with upgraded 6mm thick arms in addition to the aluminum X-lock and FPV camera protection. At 133g (frame only - without accessories) this combination provides an industry-leading balance of weight and durability for even the most demanding applications.

X-LOCK ARM RETENTIONThe QAV-S 2 introduces a new lateral X-Lock arm system. This all-aluminum arm locking system improves the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw per side for easy transportation.

ALUMINUM FPV CAMERA PROTECTIONThe new FPV camera mounting solution offers excellent camera protection and support for various cameras through customizable carbon plates. The frame includes plates with damped mounts tested and optimized for the O3 camera and plates with mounts for a range of other camera options. If you want to create your own, the M2 mount points on the aluminum guards easily allow for custom mounts. Your imagination is the limit.

INJECTION MOLDED GOPRO MOUNTThe QAV-S 2 uses the same GoPro mount pattern used by other Lumenier frames, allowing a durable injection molded GoPro mount to attach with a single screw.

BACKWARD-COMPATIBLE MOUNTING PATTERNSFor those who still want to use printed GoPro and antenna mounts, the QAV-S 2 brings the JohnnyFPV frame into line with the mount patterns from the other QAV-S series frames. The new edition now uses the same mounting pattern and standoff placement as the other frames in the series. All previous QAV-S* mounts and Bardwell Special Edition frames will fit the JohnnyFPV Edition without modification. *Original QAV-S JohnnyFPV Special Edition mounts are no longer compatible

O3 COMPATIBLE MOUNTINGThe rear plate adds 25.5 M1.6 mount holes to mount the O3 air unit to the frame directly. The frame kit also includes a 5mm full aluminum mounting kit to allow for perfect wire routing for both the O3 air unit and a rear XT60 connector.

ADJUSTABLE ALUMINUM XT60 AND ACCESSORY MOUNTA custom rear mounting solution allows for a hard mounted XT60 connection as well as a range of accessory mounting options for antennas, GPS, and rear-facing action cameras. Adjustable angles allows for the perfect position regardless of the accessory being used. The frame kit includes plates for the injection molded GoPro mount and GPS mounts with both single and dual antenna options, as well as a single antenna only option.

FOLDING ARMSThe new lock system on the QAV-S 2 JohnnyFPV SE allows the arms to fold with only one screw per side for easy transportation. Simply remove the side screws and wedges, and you are now able to fold the arms.
Specifications

Rear Stack Dimensions: 20x20 (potentially 30x30 with adapter)
Custom Parts: 6061 Aluminum (Bronze Gold)
Standoffs: 7075 Aluminum (Bronze Gold)
Screws: Black Zinc Steel 12.9 grade
Weight: 133g (without accessories)
Middle Stack Dimensions: 30x30
Arm: 6mm 3K Carbon Fiber
Frame Size: 220mm

Lumenier QAV-S 2 JohnnyFPV Manual
IMPORTANT NOTES

The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.


Includes

1x Lumenier QAV-S 2 JohnnyFPV SE 5" Frame Kit



1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna
1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate
1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right
2x JohnnyFPV QAV-S 2 Camera Plate for Grommets
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left
1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate
1x JohnnyFPV QAV-S 2 20mm Camera Plate Right
1x JohnnyFPV QAV-S 2 20mm Camera Plate Left
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate
1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate
1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate
1x JohnnyFPV QAV-S 2 Rear Base Mount Right
1x JohnnyFPV QAV-S 2 Aluminum Guard Right
1x 14 Gauge Silicon Wire (Pair, Red and Black)
1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm
1x JohnnyFPV QAV-S 2 Rear Base Mount Left
1x JohnnyFPV QAV-S 2 Aluminum Guard Left
2x JohnnyFPV QAV-S 2 6mm Arm Wedge
1x JohnnyFPV QAV-S 2 Split Plate Front
1x JohnnyFPV QAV-S 2 Split Plate Rear
1x Lumenier QAV-PRO Gopro Mount
4x JohnnyFPV QAV-S 2 5 Inch Arm
2x 5mm O3 Air Unit Mount 20mm
1x JohnnyFPV QAV-S 2 Top Plate
2x Heatshrink 5mm Diameter
2x Lumenier Battery Strap
4x Knurled Standoff
1x XT60E-M (Black)
1x Hardware Set
4x Foam Pads




Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold for conveni

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience.

Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit

BetaFPV

BetaFPV Pavo25 2.5" Cinewhoop Frame Kit

BETAFPV

This Frame Kit is for the BETAFPV Pavo25 whoop. The Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stability and protection.

BETAFPV Pavo25 2.5" Cinewhoop Frame Kit

BETAFPV Pavo25 2.5&quot Cinewhoop Frame Kit

Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stable flight and no fear of damage. 

Bullet Point

With the insert copper nut design on the main screw holes, only 6 screws are enough to assemble the whoop duct and drone, which is convenient to build. The Pavo25 frame sports a reasonable structure assembly design that is optimized to decrease complex components, making the build easy.
Made of high-quality PA12 material and 2.5mm carbon fiber. With a strong and durable frame kit, the Pavo25 frame optimizes the vibration damping structure for the camera mount, allowing pilots to get an excellent experience.
An innovative pusher frame with a duct design. It generates more lift for the whole quadcopter, improving the ability of endurance and propulsion.
Equipped with a CNC Vista Adapter. It effectively provides the Caddx Vista HD Digital VTX with a good cool down by increasing the heat dissipation area, reducing the influence of heat on VTX.



CNC Vista Adapter
CNC Vista Adapter effectively provides the Caddx Vista HD Digital VTX with a good cool down by increasing the heat dissipation area, reducing the influence of heat on VTX. It is easy to install and has two mounting angles, which can be mounted by the angle 0° or 45° depending on your needs.
Note: The CNC Vista Adapter is included in the frame kit, if you need to buy it separately, please click here.


Specification

Item: Pavo25 Frame Kit
Wheelbase: 108mm
Color: Black/Transparent Grey/Yellow/Blue/Purple
Material: PA12
Frame Color: Black

Weight: 68g (frame kit), 31.5g (without carbon fiber)
Body Size: 153.2*153.7mm (without EVA adhesive foam)
Top plate thickness: 2.5mm
Propeller size: 2.5-inch
FC pattern: 25.5*25.5mm
FPV cam spacing: 14mm
Recommend Motor: 1404 4500KV Brushless motor

Recommend Props: Gemfan D63-3B (Gray)

Recommend Battery: 4S 750mAh/4S 850mAh

Recommend FC: F405 AIO 20A Toothpick V4 BMI270

Recommend Camera: SMO 4K, DJI Action 2
Recommend VTX: Caddx Nebula Pro Nano Vista Kit/Caddx Baby Ratel2+A03 400mW 5.8G



Package
Frame Kit

1 * Pavo25 Frame Kit
1 * SMO 4K Power Cable
1 * Pavo25 Frame Assembling Guide
1 * CNC Vista Adapter

2 * Spare EVA foam tape (Black)
2 * Spare EVA foam tape (Red)
2 * 180mm Battery Strap
1 * Pack of Screws
1 * Pack of 3D Printed Parts
1 * Rear LED Light
4 * 3M Double-Sided Tapes


Frame (without carbon fiber)

1 * Pavo25 Whoop Frame (without carbon fiber)
2 * Spare EVA foam tape (Black)
2 * Spare EVA foam tape (Red)
4 * 3M Double-Sided Tapes
6 * M2*5 Screws
1 * Screwdriver



Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stable flight and no fear of damage.  Bullet Point With the insert copper nut design on the main screw holes, only 6 screws are enough to assemble the whoop duct and drone, which is convenient to build. The Pa

Pavo25 Frame Kit

GEPRC GET-ST16 Smart 16 1.6" Frame

Introducing... the&nbspGEPRC SMART 16 Freestyle Frame Kit!

Introducing... the GEPRC SMART 16 Freestyle Frame Kit!

GEPRC SMART 16 1.6" Nano Freestyle Drone - Frame Kit

GEPRC SMART 16 1.6&quot Nano Freestyle Drone - Frame Kit

EMAX

EMAX TinyHawk III Frame Kit

This&nbspframe kit&nbspis for the&nbspEMAX TinyHawk III&nbspQuadcopter.

This frame kit is for the EMAX TinyHawk III Quadcopter.

Flywoo

Flywoo Firefly Nano Baby V1.2 40mm 1.6" Frame Kit

This&nbspframe kit&nbspis for the&nbspFirefly Nano Baby Quad,&nbspwhich is a 20g ultralight 1S drone for freestyle and cruising.

This frame kit is for the Firefly Nano Baby Quad, which is a 20g ultralight 1S drone for freestyle and cruising.

Flywoo Firefly Nano Baby 40mm 1.6" 1S Frame Kit - V1.2

Flywoo Firefly Nano Baby 40mm 1.6&quot 1S Frame Kit - V1.2

GEPRC GEP-CL30 CineLog 30 3" Frame

Summary：
The latest 3-inch rack CL30 developed by GEPRC is now officially released.
CL30 is improved and developed on the basis of CL25. It continues the 26.5x26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the market. The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades. Improved the shock absorption design of the damping platform to provide more stable shooting effect.Ultra-light body weight. Naked camera GP8 and Insta 360 Go2 camera can be installed with GP camera mount.
We pursue lighter body weight, better flying feel, and more extended functions frame.

Specification:

 	Brand: GEPRC
 	Model: GEP-CL30
 	Motor to Motor: 126mm
 	Top plate: 2.0mm
 	Bottom plate: 2.0mm
 	Arm Plate3.0mm
 	FC mounting hole: 25.5mm x 25.5mm
 	VTX hole position: 20mm x 20mm
 	Motor hole position: 9mm x 9mm
 	Camera installation space: 14~19mm
 	Propeller guard internal diameter: 79mm
 	Suitable propeller size: 3 in propeller
 	Dimension: 180mm x 180mm x 38mm（Includes propeller guard）
 	Weight:62.6g（Includes propeller guard, GP camera mount, 3D printings）

Feature:

 	
Small size, light weight, good flying feel.

 	
Improved the shock absorption design of the damping platform to provide a more stable shooting effect.

 	
The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades.

 	
Naked camera GP8 and Insta 360 Go2 camera can be installed with GP camera mount.

 	
A 3D print is designed for the receiver to facilitate the installation and binding of the receiver.


Include:
Carbon Plate:

 	1 x Top Plate 2.0mm
 	1 x Arm Plate 3.0mm
 	1 x bottom Plate 2.0mm

Screws:

 	2 x Knurled nut M2
 	4 x Aluminum Column M2x3.5x25
 	2 x M2x4mm cup head screws
 	28 x M2x6.5mm round head screws
 	10 x M2x8mm round head screws
 	7 x M2x9mm round head screws
 	4 x M2x10mm round head screws
 	1 x M2x12mm cup head screw
 	4 x M2x16mm cup head screws
 	1 x M2 Rivet nut
 	4 x M2 Lock nuts
 	8 x M2 Iron nuts
 	8 x M2 * 6.5mm damping rings
 	9 x damping platform rings

3D Printings:

 	1 x 19x19mm Camera Mount
 	1 x VTX Antenna Mount
 	1 x TBS T-shaped Antenna Mount
 	1 x TBS NanoRX Mount
 	1 x Camera Protector

Injection Parts:

 	6 x 3 in Propeller Guard
 	1 x GP Camera Mount

Other Parts:

 	4 x EVA Damping Ring of Guards
 	2 x 3M Double Tapes
 	2 x Silicone Pads
 	2 x Landing Pads
 	1 x M15x200mm Battery Strap
 	1 x M15x150mm Battery Strap
 	1 x L-shaped (1.5mm)
 	1 x Antenna Tubes

Summary： The latest 3-inch rack CL30 developed by GEPRC is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the [...]

GEP-CL30 Frame Kits - GEPRC

GEP-CL30 Frame Kits

This&nbspGEP-CL30&nbspFrame kit&nbspis for the&nbspGEPRC CineLog30&nbspcinewhoop.

This GEP-CL30 Frame kit is for the GEPRC CineLog30 cinewhoop.

GEPRC CineLog 30 3" GEP-CL30 Frame Kit

GEPRC CineLog 30 3&quot GEP-CL30 Frame Kit

framesThe latest 3-inch rack CL30 developed by GEPU is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the mark

GEPRC GEP-CL30 Cinewhoop 3

BQE Pick Pocket Micro Frame

BQE Multirotors

The BQE Pick Pocket Micro Frame is specially designed for toothpick-styled AIO flight controllers and nano FPV cameras. 

Fractal Engineering

Fractal Engineering Fractal 65 Pro Frame Kit

FRACTALENGINEERING













Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 Pro was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 65 Pro Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Pro Whoop Micro Frame Kit and Meteor65 Pro Whoop frame. 
Note: This is designed for prop guards that fit 35mm props like the Meteor65 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro version has been squished to the max to fit 35mm props with Meteor 65 Pro ducts.
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!
Features

A variant of the Fractal 65 frame kit

Squished to the max to fit 35mm props with Meteor 65Pro ducts

Maintains 65mm motors distance to meet racing specs

Still fits the camera between the front ducts 1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction

Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct

Recommended Part List


BetaFPV Gemfan 1406 Tri-Blade 35mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color


HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version

HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz















FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations

Specifications

CF Weight: 1.8g

Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 65 Micro Frame Kit - Pro Lite Kit + Meteor65 Pro Black


Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 Pro was designed for you! This kit contains all

Fractal Engineering Fractal 65 Pro Micro/Whoop Frame Kit - Pro Lite Kit + Meteor65 Pro Black

Fractal Engineering Fractal 65 Pro Micro/Whoop Frame Kit - Pro Lite Ki













Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 Pro was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 65 Pro Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Pro Whoop Micro Frame Kit and Meteor65 Pro Whoop frame. 
Note: This is designed for prop guards that fit 35mm props like the Meteor65 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro version has been squished to the max to fit 35mm props with Meteor 65 Pro ducts.
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!
Features

A variant of the Fractal 65 frame kit

Squished to the max to fit 35mm props with Meteor 65Pro ducts

Maintains 65mm motors distance to meet racing specs

Still fits the camera between the front ducts 1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction

Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct

Recommended Part List


BetaFPV Gemfan 1406 Tri-Blade 35mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color


HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version

HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz















FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations

Specifications

CF Weight: 1.8g

Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 65 Micro Frame Kit - Pro Lite Kit + Meteor65 Pro Green


Fractal Engineering Fractal 65 Pro Micro/Whoop Frame Kit - Pro Lite Kit + Meteor65 Pro Green

Quad Type

Pre-Built Quads and Kits

Fractal Engineering Fractal 75 Pro Max Frame Kit

From motorpost to motorpost on this frame, the distance is 84mm.
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 75 Pro Max was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 75 Pro Max whoop micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 75 Pro Max Whoop Micro-frame kit and BetaFPV Meteor75 Pro Whoop Frame.
Note: This is designed for prop guards that fit 45mm props like the Meteor75 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro Version has been scaled to the max to fit 45mm props 
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!
Features

A completely new variant of the F75, but this is actually 84mm motorpost to motorpost distance.

The same winning recipe, scaled to fit 45mm props with ducts while keeping the camera up front

Extended camera mount to reduce prop guards in view

Low center of gravity, by bringing the AIO close to the frame/motors

Allows mounting with USB pointed up for easy accelerometer calibration

Easy maintenance, break a duct, replace only the single duct

No need for a canopy as all electronics are tucked safely between the ducts

Approximately 21g using the Happymodel DiamondF4 AIO

Recommended Parts List


Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color


Gemfan Ducted 1815 Bi-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color

HappyModel RS 0802 20,000Kv Micro Motor - Choose Version

HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version

HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz

HappyModel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX




FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations






Specifications

CF Weight: 2.21g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 75 Micro Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro Blue


From motorpost to motorpost on this frame, the distance is 84mm. Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, th

Fractal Engineering Fractal 75 Pro Max Micro/Whoop Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro Blue

Fractal Engineering Fractal 75 Pro Max Micro/Whoop Frame Kit - Pro Lit

From motorpost to motorpost on this frame, the distance is 84mm.
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 75 Pro Max was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 75 Pro Max whoop micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 75 Pro Max Whoop Micro-frame kit and BetaFPV Meteor75 Pro Whoop Frame.
Note: This is designed for prop guards that fit 45mm props like the Meteor75 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro Version has been scaled to the max to fit 45mm props 
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!
Features

A completely new variant of the F75, but this is actually 84mm motorpost to motorpost distance.

The same winning recipe, scaled to fit 45mm props with ducts while keeping the camera up front

Extended camera mount to reduce prop guards in view

Low center of gravity, by bringing the AIO close to the frame/motors

Allows mounting with USB pointed up for easy accelerometer calibration

Easy maintenance, break a duct, replace only the single duct

No need for a canopy as all electronics are tucked safely between the ducts

Approximately 21g using the Happymodel DiamondF4 AIO

Recommended Parts List


Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color


Gemfan Ducted 1815 Bi-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color

HappyModel RS 0802 20,000Kv Micro Motor - Choose Version

HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version

HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz

HappyModel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX




FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations






Specifications

CF Weight: 2.21g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 75 Micro Frame Kit - Choose Your Version


Fractal Engineering Fractal 75 Pro Max Micro/Whoop Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro Cyan

From motorpost to motorpost on this frame, the distance is 84mm.
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 75 Pro Max was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 75 Pro Max whoop micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 75 Pro Max Whoop Micro-frame kit and BetaFPV Meteor75 Pro Whoop Frame.
Note: This is designed for prop guards that fit 45mm props like the Meteor75 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro Version has been scaled to the max to fit 45mm props 
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!
Features

A completely new variant of the F75, but this is actually 84mm motorpost to motorpost distance.

The same winning recipe, scaled to fit 45mm props with ducts while keeping the camera up front

Extended camera mount to reduce prop guards in view

Low center of gravity, by bringing the AIO close to the frame/motors

Allows mounting with USB pointed up for easy accelerometer calibration

Easy maintenance, break a duct, replace only the single duct

No need for a canopy as all electronics are tucked safely between the ducts

Approximately 21g using the Happymodel DiamondF4 AIO

Recommended Parts List


Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color


Gemfan Ducted 1815 Bi-Blade 45mm Micro/Whoop Prop 8 Pack (1.5mm Shaft) - Choose Your Color

HappyModel RS 0802 20,000Kv Micro Motor - Choose Version

HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version

HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz

HappyModel OVX300 25-300mW 5.8GHz U.Fl VTX w/ OpenVTX




FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations






Specifications

CF Weight: 2.21g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 75 Micro Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro White


Fractal Engineering Fractal 75 Pro Max Micro/Whoop Frame Kit - Pro Lite Kit + BetaFPV Meteor75 Pro White

Fractal Engineering Fractal 65 Frame Kit













Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 65 Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Whoop Micro Frame kit and HappyModel Mobula6 Whoop frame. 
Note: You're gonna want to cut ducts from either an NBD, BetaFPV, or Happymodel 65mm whoop frame, and that will serve as your protection for your motor and propellers. This also allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!












Features

65mm diagonal, squished X geometry, for 31mm props
1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct

Recommended Part List

Gemfan Durable 1210 Bi-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft)

Gemfan 1219-3 Durable Tri-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft) - Choose Your Color


HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

 HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version


 HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz



 FEA optimization test preformed ensuring the stress gets spread out across the whole structure without concentrations


Specifications

CF Weight: 1.6g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 65 Micro Frame Kit - Lite Kit + Mob6 Blue


Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 was designed for you! This kit contains all you

Fractal Engineering Fractal 65 Micro/Whoop Frame Kit - Lite Kit + Mob6 Blue

Fractal Engineering Fractal 65 Micro/Whoop Frame Kit - Lite Kit + Mob6













Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames?  If you answer yes to any of those, then the Fractal 65 was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5. 
Choose between getting the Fractal 65 Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Whoop Micro Frame kit and HappyModel Mobula6 Whoop frame. 
Note: You're gonna want to cut ducts from either an NBD, BetaFPV, or Happymodel 65mm whoop frame, and that will serve as your protection for your motor and propellers. This also allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
Check out our other Micro frames, and our Fractal Engineering Products!
Check out these other Fractal Kits with a Whoop Frame included!












Features

65mm diagonal, squished X geometry, for 31mm props
1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
Low-profile camera mount, no props in view, no tilt offset
Low Center of gravity, by bringing the AIO closer to the frame/motors
Allows mounting with USB pointing up for easy accelerometer calibration
No need for a canopy as all electronics are tucked safely between the ducts
Maximum rigidity where it matters most connecting the motors to the FC
Easy maintenance, break one duct, replace only the single duct

Recommended Part List

Gemfan Durable 1210 Bi-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft)

Gemfan 1219-3 Durable Tri-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft) - Choose Your Color


HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW


HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes &amp Plug for Mobula6

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC &amp 400mW VTX - ELRS SPI

 HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version


 HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz



 FEA optimization test preformed ensuring the stress gets spread out across the whole structure without concentrations


Specifications

CF Weight: 1.6g
Motor Bolt Pattern: 6mm Tri-Mount &amp 5.5mm Tri-Mount
Stack Size: 25x25mm

 Includes

1x Fractal Engineering Fractal 65 Micro Frame Kit - Lite Kit + Mob6 Clear


Fractal Engineering Fractal 65 Micro/Whoop Frame Kit - Lite Kit + Mob6 Clear

iFlight

iFlight AOS 5R 5" Frame Kit

IFLIGHT

Redefining state of the art in FPV drone racing. The AOS 5R V5 is designed with cutting-edge patent pending technology to give you an edge over the competition.
Be sure to browse the rest of our iFlight products and DJI compatible frames, electronics and accessories.
Features

Supports up to 5.3" Props
AOS X-Cell Anti-Vibration Technology
20x20 mm M3 flight stack
25.5x25.5 mm OR 20x20 mm M2 top plate mounting
20mm standoff spacing fits most existing 3D prints for 14mm camera, shark fin, and VTX antenna
50mm stack clearance front to rear fits even the largest 20x20 M3 ESCs
⌀16mm motor mounting (supports all standard 5" motors)


Specifications

Product Name: AOS 5R Frame Kit
Frame wheelbase: 201mm
Frame Dimension: L142xW142xH38 mm
Arm Thickness: 6mm
Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Upper Plate Thickness: 2mm
Max Flight Stack Height: 25mm
Max VTX Height: 25mm
Motor Mounting: 16x16-φ3mm
Flight Stack Mounting: 20x20 Φ3mm
VTX Mounting: 20x20/Φ2mm 25.5x25.5/Φ2mm
Weight: 90g
Compatible: Vista HD system/ BLITZ mini 1.6W VTX

Includes

1x iFlight AOS 5R 5" Frame Kit


Redefining state of the art in FPV drone racing. The AOS 5R V5 is designed with cutting-edge patent pending technology to give you an edge over the competition. Be sure to browse the rest of our iFlight products and DJI compatible frames, electronics and accessories. Features Supports up to 5.3" Props AOS X-Cell Anti-V

NewBeeDrone Turismo 5'' Frame


This is NewBeeDrone&#39s first 5inch light weight frame for racing and freestyle. 
Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a whoop-size AIO board, then we suggest a build with an analog vtx setup or set it up with the Caddx Vista for that digital HD cruising. If you decide to pair this ultralight frame with a signature NewBeeDrone 20x20 series stacks (Infinity200 or CricketFPV stack) then an analog vtx build is the way to go.
At-A-Glance Frame Breakdown:

Motor Layout Type: Stretched-X configuration (longer front-to-back, than side-to-side)

Motor-to-Motor: 211mm
Cam Mounting: 14x14mm
Motor Mounting hole spacing: 4-holes spaced on a 12mm diameter
Stack Mounting: Whoop AIO board - 25.4x25.4mm (1x1inch) and 20x20 stack
Weight: (with Caddx Vista mount and TPU arm guards)  -  53g


Include:Top Plate x1Bottom Plate x1Side Camera Plate x2Arm left x2Arm Right  x2Cross Plate x23D Print Part Arm edge protect x43D Print Part Vista mount x1
Recommend build: 1. NewBeeDrone Turismo 5inch Frame2. NewBeeDrone Flow 2004 motor3. JHEMCU GHF405 BLHELI_S 35A 3-6S AIO for Racing Toothpick4. Gemfan 5125 Hurricane Durable 3 Blade 1.5mm5. Caddx Vista with Nebula nano kit V2
Instruction: Link
3DPrinted part file: Link

This is NewBeeDrone's first 5inch light weight frame for racing and freestyle.  Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a

NewBeeDrone Turismo 5'' light weight frame for Racing and Freestyle from WREKD Co.

NewBeeDrone Turismo 5'' light weight frame for Racing and Freestyle

This is NewBeeDrone's first 5inch light weight frame for racing and freestyle. 
Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a whoop-size AIO board, then we suggest a build with an analog vtx setup or set it up with the Caddx Vista for that digital HD cruising. If you decide to pair this ultralight frame with a signature NewBeeDrone 20x20 series stacks (Infinity200 or CricketFPV stack) then an analog vtx build is the way to go.
At-A-Glance Frame Breakdown:

Motor Layout Type: Stretched-X configuration (longer front-to-back, than side-to-side)

Motor-to-Motor: 211mm
Cam Mounting: 14x14mm
Motor Mounting hole spacing: 4-holes spaced on a 12mm diameter
Stack Mounting: Whoop AIO board - 25.4x25.4mm (1x1inch) and 20x20 stack
Weight: (with Caddx Vista mount and TPU arm guards)  -  53g


Include:Top Plate x1Bottom Plate x1Side Camera Plate x2Arm left x2Arm Right  x2Cross Plate x23D Print Part Arm edge protect x43D Print Part Vista mount x1
Recommend build: 1. NewBeeDrone Turismo 5inch Frame2. NewBeeDrone Flow 2004 motor3. JHEMCU GHF405 BLHELI_S 35A 3-6S AIO for Racing Toothpick4. Gemfan 5125 Hurricane Durable 3 Blade 1.5mm5. Caddx Vista with Nebula nano kit V2
Instruction: Link
3DPrinted part file: Link

NewBeeDrone Inertia DC Dead Cat 5" Frame

NewBeeDrone Inertia 5" DC (Dead Cat Style) FPV Frame

Meet the Inertia 5inch DC FPV frame - the newest addition to the Inertia series of high-performance drone frames. This innovative frame features a deadcat style design and is specifically tailored for the DJI O3 camera system, which offers stunning 4K resolution and eliminates the need for a separate action camera.The Inertia 5inch DC FPV frame is designed for optimal stability and agility, with front and rear arms angled backward to minimize prop wash and offer an unobstructed view for the DJI O3 camera system. The frame is built with durable, lightweight carbon fiber and is compatible with standard 5-inch propellers and 22xx or 23xx size motors. It also includes multiple accessory mounting options and features a modular design for easy assembly and maintenance.
Overall, the Inertia 5inch DC is a top-performing frame that is perfect for pilots looking to take their aerial photography and videography to the next level with the DJI O3 camera system. With its exceptional stability, maneuverability, and easy customization, the Inertia 5inch DC is an ideal choice for both casual and professional pilots alike.
What's included- Carbon Fiber Parts:1x InertiaDC Top Plate 1.5mm1x InertiaDC Mid Plate 2mm (M3 Press nut Installed)1x InertiaDC Bottom Plate 2mm2x InertiaDC 5 inch Front Arm 6mm2x InertiaDC 5 inch Rear Arm 6mm2x InertiaDC FPV Cam Side Plate 1.5mm- Hardware Pack:7x Inertia M3 7075 Aluminum Standoff 20mm 3x Inertia M3 7075 Aluminum Standoff 28mm4x Inertia M2 7075 Aluminum Standoff 20mm 17x Inertia M3 High Tensile Carbon Steel 10mm13x Inertia M3 High Tensile Carbon Steel  8mm5x Inertia M3 High Tensile Carbon Steel  12mm5x Inertia M3 High Tensile Carbon Steel  16mm5x Inertia M2 High Tensile Carbon Steel  8mm6x Inertia M3 Cone Washer 
-DJI O3 VTX Hardware:2x CNC Aluminum Parts5x M1.6 x 8mm Stainless steel screw Philips head5x M2-5mm screws
-Accessories:2x NewBeeDrone Battery Strap Large5x NewBeeDrone Motor Wire Protector 30x75x Zip-tight 2mm x10mm-3D Printed Parts:4x Arm Protectors1x FPV Camera and Crossfire Antenna Mount1x GPS Mount (Diatone mamba m8 plus GPS Module)1x Zip-tight Style VTX Antenna Mount
NetWeight: 130g (Not include the gopro Mount and Arm protectors) 
Inertia Frame 3D Printed Part STL File 

NewBeeDrone Inertia 5" DC (Dead Cat Style) FPV Frame Meet the Inertia 5inch DC FPV frame - the newest addition to the Inertia series of high-performance drone frames. This innovative frame features a deadcat style design and is specifically tailored for the DJI O3 camera system, which offers stunning 4K resolution and 

NewBeeDrone Inertia 5" DC (Dead Cat Style) FPV Frame

NewBeeDrone Inertia 5&quot DC (Dead Cat Style) FPV Frame

Meet the Inertia 5inch DC FPV frame - the newest addition to the Inertia series of high-performance drone frames. This innovative frame features a deadcat style design and is specifically tailored for the DJI O3 camera system, which offers stunning 4K resolution and eliminates the need for a separate action camera.The Inertia 5inch DC FPV frame is designed for optimal stability and agility, with front and rear arms angled backward to minimize prop wash and offer an unobstructed view for the DJI O3 camera system. The frame is built with durable, lightweight carbon fiber and is compatible with standard 5-inch propellers and 22xx or 23xx size motors. It also includes multiple accessory mounting options and features a modular design for easy assembly and maintenance.
Overall, the Inertia 5inch DC is a top-performing frame that is perfect for pilots looking to take their aerial photography and videography to the next level with the DJI O3 camera system. With its exceptional stability, maneuverability, and easy customization, the Inertia 5inch DC is an ideal choice for both casual and professional pilots alike.
What&#39s included- Carbon Fiber Parts:1x InertiaDC Top Plate 1.5mm1x InertiaDC Mid Plate 2mm (M3 Press nut Installed)1x InertiaDC Bottom Plate 2mm2x InertiaDC 5 inch Front Arm 6mm2x InertiaDC 5 inch Rear Arm 6mm2x InertiaDC FPV Cam Side Plate 1.5mm- Hardware Pack:7x Inertia M3 7075 Aluminum Standoff 20mm 3x Inertia M3 7075 Aluminum Standoff 28mm4x Inertia M2 7075 Aluminum Standoff 20mm 17x Inertia M3 High Tensile Carbon Steel 10mm13x Inertia M3 High Tensile Carbon Steel  8mm5x Inertia M3 High Tensile Carbon Steel  12mm5x Inertia M3 High Tensile Carbon Steel  16mm5x Inertia M2 High Tensile Carbon Steel  8mm6x Inertia M3 Cone Washer 
-DJI O3 VTX Hardware:2x CNC Aluminum Parts5x M1.6 x 8mm Stainless steel screw Philips head5x M2-5mm screws
-Accessories:2x NewBeeDrone Battery Strap Large5x NewBeeDrone Motor Wire Protector 30x75x Zip-tight 2mm x10mm-3D Printed Parts:4x Arm Protectors1x FPV Camera and Crossfire Antenna Mount1x GPS Mount (Diatone mamba m8 plus GPS Module)1x Zip-tight Style VTX Antenna Mount
NetWeight: 130g (Not include the gopro Mount and Arm protectors) 
Inertia Frame 3D Printed Part STL File 

NewBeeDrone Inertia 5" DC (Dead Cat Style) FPV Frame from WREKD Co.

NewBeeDrone Inertia 5

NewBeeDrone Inertia 5" Frame

NewBeeDrone Inertia 5" FPV Frame

Introducing INERTIA FPV Frame, a passion project created by NewBeeDrone to push the boundary of lightweight frame design. This beast strikes a perfect balance between practicality and aesthetics. We were able to pack all of your favorite features in to this thin and light package. The crazy skinny carbon fiber arms are engineered to minimize air resistance and provide excellent structural rigidity with our special 3-point locking mechanism. The center portion of the body extends outward to further reinforce the arms and give the frame a wide-body look that’s reminiscent of a modified race car. We also ensured outstanding hardware compatibilities by including multiple mounting options for both analog and digital system. The widened front standoffs make it possible to install cameras with any lens size, perfect for the large camera of the new DJI Digital HD system. The extra-strong action camera mounting system allows you to securely carry your favorite recording devices. With its unlimited capabilities, the INERTIA frame will exceeds in all scenarios, whether you are flying cinematic, freestyle, or both.
What's included- Carbon Fiber Parts:1x Inertia Top Plate 1.5mm1x Inertia Mid Plate 2mm (M3 Press nut Installed)1x Inertia Bottom Plate 2mm4x Inertia 5 inch Arm 6mm2x Inertia FPV Cam Side Plate 1.5mm- Hardware Pack:7x Inertia M3 7075 Aluminum Standoff 20mm 3x Inertia M3 7075 Aluminum Standoff 28mm3x Inertia M2 7075 Aluminum Standoff 20mm 17x Inertia M3 High Tensile Carbon Steel 10mm13x Inertia M3 High Tensile Carbon Steel  8mm5x Inertia M3 High Tensile Carbon Steel  12mm5x Inertia M3 High Tensile Carbon Steel  16mm5x Inertia M2 High Tensile Carbon Steel  8mm6x Inertia M3 Cone Washer 
-Vista/Link VTX Hardware:4x M2 Steel Screw 18mm5x M2 Lock Nut with Nylon Ring4x M2 Dampening Grommet Small
-Accessories:2x NewBeeDrone Battery Strap Large5x NewBeeDrone Motor Wire Protector 30x75x Zip-tight 2mm x10mm-3D Printed Parts:4x Arm Protectors1x FPV Camera and Crossfire Antenna Mount1x GPS Mount (Diatone mamba m8 plus GPS Module)1x Zip-tight Style VTX Antenna Mount
NetWeight: 130g (Not include the gopro Mount and Arm protectors) 
Inertia Frame 3D Printed Part STL File 
Build Video:








NewBeeDrone Inertia 5" FPV Frame Introducing INERTIA FPV Frame, a passion project created by NewBeeDrone to push the boundary of lightweight frame design. This beast strikes a perfect balance between practicality and aesthetics. We were able to pack all of your favorite features in to this thin and light package. The c

NewBeeDrone INERTIA 5" FPV Frame

NewBeeDrone Inertia 5&quot FPV Frame

Introducing INERTIA FPV Frame, a passion project created by NewBeeDrone to push the boundary of lightweight frame design. This beast strikes a perfect balance between practicality and aesthetics. We were able to pack all of your favorite features in to this thin and light package. The crazy skinny carbon fiber arms are engineered to minimize air resistance and provide excellent structural rigidity with our special 3-point locking mechanism. The center portion of the body extends outward to further reinforce the arms and give the frame a wide-body look that’s reminiscent of a modified race car. We also ensured outstanding hardware compatibilities by including multiple mounting options for both analog and digital system. The widened front standoffs make it possible to install cameras with any lens size, perfect for the large camera of the new DJI Digital HD system. The extra-strong action camera mounting system allows you to securely carry your favorite recording devices. With its unlimited capabilities, the INERTIA frame will exceeds in all scenarios, whether you are flying cinematic, freestyle, or both.
What&#39s included- Carbon Fiber Parts:1x Inertia Top Plate 1.5mm1x Inertia Mid Plate 2mm (M3 Press nut Installed)1x Inertia Bottom Plate 2mm4x Inertia 5 inch Arm 6mm2x Inertia FPV Cam Side Plate 1.5mm- Hardware Pack:7x Inertia M3 7075 Aluminum Standoff 20mm 3x Inertia M3 7075 Aluminum Standoff 28mm3x Inertia M2 7075 Aluminum Standoff 20mm 17x Inertia M3 High Tensile Carbon Steel 10mm13x Inertia M3 High Tensile Carbon Steel  8mm5x Inertia M3 High Tensile Carbon Steel  12mm5x Inertia M3 High Tensile Carbon Steel  16mm5x Inertia M2 High Tensile Carbon Steel  8mm6x Inertia M3 Cone Washer 
-Vista/Link VTX Hardware:4x M2 Steel Screw 18mm5x M2 Lock Nut with Nylon Ring4x M2 Dampening Grommet Small
-Accessories:2x NewBeeDrone Battery Strap Large5x NewBeeDrone Motor Wire Protector 30x75x Zip-tight 2mm x10mm-3D Printed Parts:4x Arm Protectors1x FPV Camera and Crossfire Antenna Mount1x GPS Mount (Diatone mamba m8 plus GPS Module)1x Zip-tight Style VTX Antenna Mount
NetWeight: 130g (Not include the gopro Mount and Arm protectors) 
Inertia Frame 3D Printed Part STL File 
Build Video:








NewBeeDrone INERTIA 5" FPV Frame from WREKD Co.

NewBeeDrone INERTIA 5

NewBeeDrone CinemAh 3" Frame


A New Cinewhoop Design Philosophy

To date, many ducted cinewhoop frames have been needlessly heavy. Additionally, existing light cinewhoop frames don’t have guarded props for flying around softer targets. Heavy frames leave you with very little room for adaptability to use the frame for your shoots whether it be increased payload capacity or the option for larger batteries. We at NewBeeDrone worked to change that.
The CinemAh Frame - The Most Versatile Cinewhoop Frame
The CinemAh frame is NewBeeDrone’s response to the need for a lighter and more versatile cinewhoop frame to carry a full GoPro. The CinemAh has a unique all-carbon fiber frame structure that allows for easy access to electronics while providing maximum structural strength.
The GoPro Mount (Not Included)
The NewBeeDrone CinemAh cinewhoop TPU GoPro 8 and 9 mounts allow for 4 built-in angles for quick-snap adjustment from 0 deg to 22.5 deg. The capture cam mounts are 2xM2 mounting holes set 20mm apart allowing the community to design any mounting solution for any HD capture cam option. 
Other 3D Printed Accessories (Not Included)
﻿Check out our complete collection of 3D printed accessories for the Cinemah! We've got snap in ducts, lightweight battery straps, and protective duct coverings in addition to action camera mounts.
 
Electronics Mounting:

2 sets of 1x1inch mounting locations
Front 20x20 location has M3 mounting for a flight controller and ESC stack.
Rear 20x20 location has M2 mounting for Caddx Vista – with rear antenna mount.
Camera mounting – single and double screw camera mounting options.
Note: The frame does not fit an air unit.

Motor Mounting: 12mm diameter, 4-hole pattern

Suggested Motors: 14xx – 20xx

Propeller size:

3inch or 76mm propeller 


Weight: 

78g with Adjustable GoPro Hero8 mount and motor screws
68g without GoPro Hero 8 mount 
Downloadable 3D printed TPU snap-in ducts (x4) weigh 24g total – 6g each duct

Included in the CinemAh Frame Package

1x Set of Carbon Fiber Parts
1x Set of Hardware

Recommended Parts:

Stack: NewBeeDrone Infinity200 or Cricket200
Motors: NewBeeDrone Flow 1408 4150KV
DJI FPV System: CaddX Vista with DJI Camera

Battery: GNB 1300-1350mAh 4s Lipo
Propellers: Gemfan Ducted Durable 5 Blade 76mm
GoPro Hero 8 and Hero 9 Mount

If you need 3D prints, get them here! 
3D Printed Parts Files
3D Printed Parts Design by Third partyCaddx Peanut Mount by Jason Suter. Thank you Jason!!
Link to manual.
We have both 4S and 6S tune by using the parts above, this tune is under betaflight firmware 4.2.X. if you are using 4.2.x you can directly copy the text and go to CLI commend to paste. it will auto save to your PID and Filter profile setting. Profile 1 is for 6S setup, Profile 2 is for 4S setup, Please make sure you choose the right PID profile on the setting to match your drone configuration. This PID will also works for any flight controller are under betaflight 4.2.x version, as long as the flight controller is using MPU6000 gyro. The text document I provide below only contain the PID and Filter data for 3 different profile. It will not change any other settings on your flight controller. Link




Build Video: 

A New Cinewhoop Design Philosophy To date, many ducted cinewhoop frames have been needlessly heavy. Additionally, existing light cinewhoop frames don’t have guarded props for flying around softer targets. Heavy frames leave you with very little room for adaptability to use the frame for your shoots whether it be increa

NewBeeDrone CinemAh Frame

Five33

Five33 Footy Frame Kit

FIVE33

Footy is a fulfillment of multiple requests, all in one, do-it-all, package. Numerous pilots asked for a Five33 Engineered Freestyle Frame, a 5” TinyTrainer, and a clean Cinematic platform. So in typical Five33 fashion, we brought together the BEST team of pilots to test, improve, and deliver the ANSWER to all of those requests.
Check out all our DJI-compatible frames, electronics, and accessories and all our FIVE33 Flying Gear!

Features

Variable HD camera angle built-in
Injection Molded Canopy included
Mid Mount Battery. CG is king
Battery strap slots
Camera protection
Multiple configurations (Freestyle, Racer, &amp Livestream Mode)
DJI Air Unit Compatible (W/ 20×20 stack)
20×20 or 30×30 stacks
rear 20×20 mounting holes
LED Kit COMING SOON!
123g Frame Weight

All 3D files on thingverse!Link:  https://www.thingiverse.com/thing:5151889
Includes

1x FIVE33 Footy 5" Frame Kit
4x 5" Arms


Footy is a fulfillment of multiple requests, all in one, do-it-all, package. Numerous pilots asked for a Five33 Engineered Freestyle Frame, a 5” TinyTrainer, and a clean Cinematic platform. So in typical Five33 fashion, we brought together the BEST team of pilots to test, improve, and deliver the ANSWER to all of those

FIVE33 Footy 5" Frame Kit

Freestyle, Racing, or Cinematic. Just build it.

Footy Frame Kit | Five33

Footy Frame Kit

WREKD Co.

 WREKD Co. is an authorized dealer of FIVE33 products in the USA.
Footy is a fulfillment of multiple requests, all in one, do-it-all package. Numerous pilots asked for a Five33 Engineered Freestyle Frame, a 5” TT, and a clean Cinematic platform. So in typical Five33 fashion, we brought together the BEST team of pilots to test, improve, and deliver the ANSWER to all of those requests.
Check out all our DJI-compatible frames, electronics, and accessories and all our FIVE33 Flying Gear!

Features

Variable HD camera angle built-in
Injection Molded Canopy included
Mid Mount Battery. CG is king
Battery strap slots
Camera protection
Multiple configurations (Freestyle, Racer, &amp Livestream Mode)
DJI Air Unit Compatible (W/ 20×20 stack)
20×20 or 30×30 stacks
rear 20×20 mounting holes
LED Kit
123g Frame Weight

All 3D files on thingverse!Link:  https://www.thingiverse.com/thing:5151889
Includes

1x FIVE33 Footy 5" Frame Kit
4x 5" Arms


WREKD Co. is an authorized dealer of FIVE33 products in the USA. Footy is a fulfillment of multiple requests, all in one, do-it-all package. Numerous pilots asked for a Five33 Engineered Freestyle Frame, a 5” TT, and a clean Cinematic platform. So in typical Five33 fashion, we brought together the BEST team of pilots t

Five33 Footy 5" Frame Kit

 WREKD Co. is an authorized dealer of FIVE33 products in the USA.
Footy is a fulfillment of multiple requests, all in one, do-it-all package. Numerous pilots asked for a Five33 Engineered Freestyle Frame, a 5” TT, and a clean Cinematic platform. So in typical Five33 fashion, we brought together the BEST team of pilots to test, improve, and deliver the ANSWER to all of those requests.
Check out all our DJI-compatible frames, electronics, and accessories and all our FIVE33 Flying Gear!

Features

Variable HD camera angle built-in
Injection Molded Canopy included
Mid Mount Battery. CG is king
Battery strap slots
Camera protection
Multiple configurations (Freestyle, Racer, &ampamp Livestream Mode)
DJI Air Unit Compatible (W/ 20×20 stack)
20×20 or 30×30 stacks
rear 20×20 mounting holes
LED Kit
123g Frame Weight

All 3D files on thingverse!Link:  https://www.thingiverse.com/thing:5151889
Includes

1x FIVE33 Footy 5&quot Frame Kit
4x 5&quot Arms


Upgrade your FPV drone experience with the FIVE33 Footy 5" Frame Kit. Versatile, durable, and designed by top pilots. Elevate your flights now.

Five33 Footy 5" Frame Kit from WREKD Co.

Five33 Footy 5

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Motor Stator Size

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 

Flight Controllers

Camera Size

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 