FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

GEPRC

GEPRC Racer 5" Frame Kit

When you&#39re chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5&quot Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight controller attaches easily to 20x20mm/25.5x25.5mm/30.5x30.5mm mounting holes, and motors attach to the 16x16mm. 












When the conventional FPV drone cannot satisfy the pursuit of speed in FPV racing, then this is the frame for you!
Choose between having the aluminum plate colored with red or silver accents!












Be sure to check out all our 5&quot frames,  and our GEPRC products!










Specifications

Model: RACER FPV Frame

Frame: GEP-RACER Frame

Dimensions: 175mm×173mm

Wheelbase: 208mm

Top plate: 2.0mm

Aluminum plate: 2.0mm

Bottom plate: 2.0mm

Arm thickness: 5.0mm

Aluminum column size: M3x6x24mm

FC mounting hole: 30.5mmx30.5mm/25.5mmx25.5mm/20mmx20mm

VTX mounting hole: 20mmx20mm

Motor mounting hole: 16mmx16mm

Camera installation space: 14mm

Propeller: 5 inches

Weight: 78g ± 2g

Includes

1x Top plate
1x Bottom plate
1x Aluminum plate (Red or Titanium)
1x Camera mount
1x VTX antenna mount
1x Shark fin print
4x M3x6x24mm aluminum column
2x 20x250mm battery cable ties
2x Battery anti-skid pads
1x Screw pack
1x L-shaped screwdriver 1.5mm
1x L-shaped screwdriver 2mm


When you're chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5" Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight cont

GEPRC Racer 5" Frame Kit - Choose Your Color from WREKD Co.

GEPRC Racer 5

GEPRC Racer 5" Frame Kit - Choose Your Color

The GEPRC Racer frame combines the 7075-T6 aviation aluminum alloy splint and the high-grade T700 carbon plate CNC processing.

GEPRC Racer 5" FPV Frame Kit - Silver

GEPRC Racer 5&quot FPV Frame Kit - Silver

When you're chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5" Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight controller attaches easily to 20x20mm/25.5x25.5mm/30.5x30.5mm mounting holes, and motors attach to the 16x16mm. 












When the conventional FPV drone cannot satisfy the pursuit of speed in FPV racing, then this is the frame for you!
Choose between having the aluminum plate colored with red or silver accents!












Be sure to check out all our 5" frames,  and our GEPRC products!










Specifications

Model: RACER FPV Frame

Frame: GEP-RACER Frame

Dimensions: 175mm×173mm

Wheelbase: 208mm

Top plate: 2.0mm

Aluminum plate: 2.0mm

Bottom plate: 2.0mm

Arm thickness: 5.0mm

Aluminum column size: M3x6x24mm

FC mounting hole: 30.5mmx30.5mm/25.5mmx25.5mm/20mmx20mm

VTX mounting hole: 20mmx20mm

Motor mounting hole: 16mmx16mm

Camera installation space: 14mm

Propeller: 5 inches

Weight: 78g ± 2g

Includes

1x Top plate
1x Bottom plate
1x Aluminum plate (Red or Titanium)
1x Camera mount
1x VTX antenna mount
1x Shark fin print
4x M3x6x24mm aluminum column
2x 20x250mm battery cable ties
2x Battery anti-skid pads
1x Screw pack
1x L-shaped screwdriver 1.5mm
1x L-shaped screwdriver 2mm


Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

Lumenier

Lumenier QAV-S 2 JohnnyFPV SE 7" Frame Kit

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience.&nbsp

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. 

Lumenier QAV-S 2 JohnnyFPV SE 7” Frame Kit

LUMENIER

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only one screw per side. The frame's aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 7" frame achieves an unparalleled balance of durability and weight at 182g (frame only).Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance.
Check out the rest of our Lumenier products or the rest of our 7" drone frames.
Features

Made in Collaboration with expert FPV pilot JohnnyFPV
Frame made of High-Quality Lumenier components
Adjustable Aluminum XT60 and Accessory Mount
Backward-compatible mounting patterns
Aluminum FPV Camera Protection
Balanced Durability and Weight
Injection-Molded GoPro Mount
DeadCat Arm Configuration
O3 Compatible Mounting
Arm Braces for Rigidity
X-Lock Arm Retention



BALANCED DURABILITY AND WEIGHTThe QAV-S 2 JohnnyFPV Edition builds on the durability of its predecessor with upgraded 6mm thick arms in addition to the aluminum X-lock and FPV camera protection. At 133g (frame only - without accessories) this combination provides an industry-leading balance of weight and durability for even the most demanding applications.

X-LOCK ARM RETENTIONThe QAV-S 2 introduces a new lateral X-Lock arm system. This all-aluminum arm locking system improves the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw per side for easy transportation.

ALUMINUM FPV CAMERA PROTECTIONThe new FPV camera mounting solution offers excellent camera protection and support for various cameras through customizable carbon plates. The frame includes plates with damped mounts tested and optimized for the O3 camera and plates with mounts for a range of other camera options. If you want to create your own, the M2 mount points on the aluminum guards easily allow for custom mounts. Your imagination is the limit.

INJECTION MOLDED GOPRO MOUNTThe QAV-S 2 uses the same GoPro mount pattern used by other Lumenier frames, allowing a durable injection molded GoPro mount to attach with a single screw.

BACKWARD-COMPATIBLE MOUNTING PATTERNSFor those who still want to use printed GoPro and antenna mounts, the QAV-S 2 brings the JohnnyFPV frame into line with the mount patterns from the other QAV-S series frames. The new edition now uses the same mounting pattern and standoff placement as the other frames in the series. All previous QAV-S* mounts and Bardwell Special Edition frames will fit the JohnnyFPV Edition without modification. *Original QAV-S JohnnyFPV Special Edition mounts are no longer compatible

O3 COMPATIBLE MOUNTINGThe rear plate adds 25.5 M1.6 mount holes to mount the O3 air unit to the frame directly. The frame kit also includes a 5mm full aluminum mounting kit to allow for perfect wire routing for both the O3 air unit and a rear XT60 connector.

ADJUSTABLE ALUMINUM XT60 AND ACCESSORY MOUNTA custom rear mounting solution allows for a hard mounted XT60 connection as well as a range of accessory mounting options for antennas, GPS, and rear-facing action cameras. Adjustable angles allows for the perfect position regardless of the accessory being used. The frame kit includes plates for the injection molded GoPro mount and GPS mounts with both single and dual antenna options, as well as a single antenna only option.

FOLDING ARMSThe new lock system on the QAV-S 2 JohnnyFPV SE allows the arms to fold with only one screw per side for easy transportation. Simply remove the side screws and wedges, and you are now able to fold the arms.
Specifications

Rear Stack Dimensions: 20x20 (potentially 30x30 with adapter)
Custom Parts: 6061 Aluminum (Bronze Gold)
Standoffs: 7075 Aluminum (Bronze Gold)
Screws: Black Zinc Steel 12.9 grade
Weight: 182g (without accessories)
Middle Stack Dimensions: 30x30
Arm: 6mm 3K Carbon Fiber
Frame Size: 220mm

Lumenier QAV-S 2 JohnnyFPV Manual
IMPORTANT NOTES

The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.


Includes

1x Lumenier QAV-S 2 JohnnyFPV SE 7" Frame Kit



1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna
1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate
1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right
2x JohnnyFPV QAV-S 2 Camera Plate for Grommets
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left
1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate
1x JohnnyFPV QAV-S 2 20mm Camera Plate Right
1x JohnnyFPV QAV-S 2 20mm Camera Plate Left
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate
1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate
1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate
1x JohnnyFPV QAV-S 2 Rear Base Mount Right
1x JohnnyFPV QAV-S 2 Aluminum Guard Right
1x 14 Gauge Silicon Wire (Pair, Red and Black)
1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm
1x JohnnyFPV QAV-S 2 Rear Base Mount Left
1x JohnnyFPV QAV-S 2 Aluminum Guard Left
2x JohnnyFPV QAV-S 2 6mm Arm Wedge
2x JohnnyFPV QAV-S 2 7 Inch Arm Brace
2x JohnnyFPV QAV-S 2 7 Inch Arm Front
2x JohnnyFPV QAV-S 2 7 Inch Arm Rear
1x JohnnyFPV QAV-S 2 Split Plate Front
1x JohnnyFPV QAV-S 2 Split Plate Rear
1x Lumenier QAV-PRO Gopro Mount
2x 5mm O3 Air Unit Mount 20mm
1x JohnnyFPV QAV-S 2 Top Plate
2x Heatshrink 5mm Diameter
2x Lumenier Battery Strap
4x Knurled Standoff
1x XT60E-M (Black)
1x Hardware Set
4x Foam Pads



Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only o

Lumenier QAV-S 2 JohnnyFPV SE 5" Frame Kit

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold for convenient transportation with just one screw per side. The frame's aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 5" frame achieves an unparalleled balance of durability and weight at 133g (frame only).Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance.
Features

Made in Collaboration with expert FPV pilot JohnnyFPV
Frame made of High-Quality Lumenier components
Adjustable Aluminum XT60 and Accessory Mount
Backward-compatible mounting patterns
Aluminum FPV Camera Protection
Balanced Durability and Weight
Injection-Molded GoPro Mount
O3 Compatible Mounting
X-Lock Arm Retention



 BALANCED DURABILITY AND WEIGHTThe QAV-S 2 JohnnyFPV Edition builds on the durability of its predecessor with upgraded 6mm thick arms in addition to the aluminum X-lock and FPV camera protection. At 133g (frame only - without accessories) this combination provides an industry-leading balance of weight and durability for even the most demanding applications.

X-LOCK ARM RETENTIONThe QAV-S 2 introduces a new lateral X-Lock arm system. This all-aluminum arm locking system improves the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw per side for easy transportation.

ALUMINUM FPV CAMERA PROTECTIONThe new FPV camera mounting solution offers excellent camera protection and support for various cameras through customizable carbon plates. The frame includes plates with damped mounts tested and optimized for the O3 camera and plates with mounts for a range of other camera options. If you want to create your own, the M2 mount points on the aluminum guards easily allow for custom mounts. Your imagination is the limit.

INJECTION MOLDED GOPRO MOUNTThe QAV-S 2 uses the same GoPro mount pattern used by other Lumenier frames, allowing a durable injection molded GoPro mount to attach with a single screw.

BACKWARD-COMPATIBLE MOUNTING PATTERNSFor those who still want to use printed GoPro and antenna mounts, the QAV-S 2 brings the JohnnyFPV frame into line with the mount patterns from the other QAV-S series frames. The new edition now uses the same mounting pattern and standoff placement as the other frames in the series. All previous QAV-S* mounts and Bardwell Special Edition frames will fit the JohnnyFPV Edition without modification. *Original QAV-S JohnnyFPV Special Edition mounts are no longer compatible

O3 COMPATIBLE MOUNTINGThe rear plate adds 25.5 M1.6 mount holes to mount the O3 air unit to the frame directly. The frame kit also includes a 5mm full aluminum mounting kit to allow for perfect wire routing for both the O3 air unit and a rear XT60 connector.

ADJUSTABLE ALUMINUM XT60 AND ACCESSORY MOUNTA custom rear mounting solution allows for a hard mounted XT60 connection as well as a range of accessory mounting options for antennas, GPS, and rear-facing action cameras. Adjustable angles allows for the perfect position regardless of the accessory being used. The frame kit includes plates for the injection molded GoPro mount and GPS mounts with both single and dual antenna options, as well as a single antenna only option.

FOLDING ARMSThe new lock system on the QAV-S 2 JohnnyFPV SE allows the arms to fold with only one screw per side for easy transportation. Simply remove the side screws and wedges, and you are now able to fold the arms.
Specifications

Rear Stack Dimensions: 20x20 (potentially 30x30 with adapter)
Custom Parts: 6061 Aluminum (Bronze Gold)
Standoffs: 7075 Aluminum (Bronze Gold)
Screws: Black Zinc Steel 12.9 grade
Weight: 133g (without accessories)
Middle Stack Dimensions: 30x30
Arm: 6mm 3K Carbon Fiber
Frame Size: 220mm

Lumenier QAV-S 2 JohnnyFPV Manual
IMPORTANT NOTES

The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.


Includes

1x Lumenier QAV-S 2 JohnnyFPV SE 5" Frame Kit



1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna
1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate
1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right
2x JohnnyFPV QAV-S 2 Camera Plate for Grommets
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left
1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate
1x JohnnyFPV QAV-S 2 20mm Camera Plate Right
1x JohnnyFPV QAV-S 2 20mm Camera Plate Left
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate
1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate
1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate
1x JohnnyFPV QAV-S 2 Rear Base Mount Right
1x JohnnyFPV QAV-S 2 Aluminum Guard Right
1x 14 Gauge Silicon Wire (Pair, Red and Black)
1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm
1x JohnnyFPV QAV-S 2 Rear Base Mount Left
1x JohnnyFPV QAV-S 2 Aluminum Guard Left
2x JohnnyFPV QAV-S 2 6mm Arm Wedge
1x JohnnyFPV QAV-S 2 Split Plate Front
1x JohnnyFPV QAV-S 2 Split Plate Rear
1x Lumenier QAV-PRO Gopro Mount
4x JohnnyFPV QAV-S 2 5 Inch Arm
2x 5mm O3 Air Unit Mount 20mm
1x JohnnyFPV QAV-S 2 Top Plate
2x Heatshrink 5mm Diameter
2x Lumenier Battery Strap
4x Knurled Standoff
1x XT60E-M (Black)
1x Hardware Set
4x Foam Pads




Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold for conveni

Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience.

Lumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit

Flywoo

Flywoo Explorer LR Walksnail Long Range 4" Frame Kit

FLYWOO











The Flywoo Explorer LR HD Walksnail Deadcat Long Range 4" Frame kit is designed to fit the Walksnail VTX and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease and explore with minimal noise. 
Check out the rest of our 4" frames,  as well as other great products from Flywoo!











Includes

1x Flywoo Explorer LR 4" Walksnail Long Range Frame kit
1x Black TPU 3D Printed Parts 
1x Top plate
1x Bottom plate
1x central plate
2x Front arms
2x Rear arms
2x Side plate
2x Battery straps
1x hardware sets
1x Battery pad
2x insulation sheet


The Flywoo Explorer LR HD Walksnail Deadcat Long Range 4" Frame kit is designed to fit the Walksnail VTX and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with 

Flywoo Explorer LR Walksnail Long Range 4" Frame kit

The Explorer LR 4 Walksnail frame is perfectly designed for the Walksnail VTX and Camera , while keeping FLYWOO's signature compact design.

Flywoo Explorer LR 4" Walksnail Frame Kit

Flywoo Explorer LR 4&quot Walksnail Frame Kit

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module while keeping FLYWOO&#x27s signature compact design. We&#x27ve also designed a new camera canopy to protect the lens well compatible with both 16X16 and 20X20 flight towers. The frame is made of durable high quality 3K carbon fiber board with excellent performance and fashionable appearance. NOTE* The only parts compatible with the Explorer LR V2 frame are the front arms、 In the Box 1 X Black TPU 3D Printed Parts 1 X Top plate 1X Bottom plate 1x central plate 2x Front arms 2x Rear arms 2x Side plate 2x Battery straps 1x hardware sets 1x Battery pad 2x insulation sheet

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module while keeping FLYWOO's signature compact design. We've also designed a new camera canopy to protect the lens well compatible with both 16X16 and 20X20 flight towers. The frame is made of durable high quality 3K carbon fiber board with excellent performance and fashionable appearance. NOTE* The only parts compatible with the Explorer LR V2 frame are the front arms、 In the Box 1 X Black TPU 3D Printed Parts 1 X Top plate 1X Bottom plate 1x central plate 2x Front arms 2x Rear arms 2x Side plate 2x Battery straps 1x hardware sets 1x Battery pad 2x insulation sheet

Explorer LR 4 Walksnail Frame kit











The Flywoo Explorer LR HD Walksnail Deadcat Long Range 4&quot Frame kit is designed to fit the Walksnail VTX and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease and explore with minimal noise. 
Check out the rest of our 4&quot frames,  as well as other great products from Flywoo!











Includes

1x Flywoo Explorer LR 4&quot Walksnail Long Range Frame kit
1x Black TPU 3D Printed Parts 
1x Top plate
1x Bottom plate
1x central plate
2x Front arms
2x Rear arms
2x Side plate
2x Battery straps
1x hardware sets
1x Battery pad
2x insulation sheet


Flywoo Explorer LR Walksnail Long Range 4" Frame kit from WREKD Co.

Flywoo Explorer LR Walksnail Long Range 4

Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame Kit

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module, while keeping FLYWOO's signature compact design.We've also designed a new camera canopy to protect the lens well, compatible with both 16X16 and 20X20 flight towers.

Flywoo Explorer LR 4" O3 Frame Kit

Flywoo Explorer LR 4&quot O3 Frame Kit































The Flywoo Explorer LR HD O3 Deadcat Long Range 4&quot Frame kit is designed to fit the DJI O3 Air unit and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease and explore with minimal noise.
Check out the rest of our 4&quot frames,  as well as other great products from Flywoo!































Includes

1x Flywoo Explorer LR HD O3 Deadcat Long Range 4&quot Frame Kit
1x Black TPU 3D Printed Parts 
1x Top plate
1x Bottom plate
1x central plate
2x Front arms
2x Rear arms
2x Side plate
2x Battery straps
1x hardware sets
1x Battery pad
2x insulation sheet


The Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame kit is designed to fit the DJI O3 Air unit and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease 

Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame Kit from WREKD Co.

Flywoo Explorer LR HD O3 Deadcat Long Range 4































The Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame kit is designed to fit the DJI O3 Air unit and accommodate 16x16 and 20x20 flight towers. This compact frame allows you to enjoy the experience of long-range FPV flying without disturbing others or running into legal troubles. Cruise through landscapes with ease and explore with minimal noise.
Check out the rest of our 4" frames,  as well as other great products from Flywoo!































Includes

1x Flywoo Explorer LR HD O3 Deadcat Long Range 4" Frame Kit
1x Black TPU 3D Printed Parts 
1x Top plate
1x Bottom plate
1x central plate
2x Front arms
2x Rear arms
2x Side plate
2x Battery straps
1x hardware sets
1x Battery pad
2x insulation sheet


The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module while keeping FLYWOO&#x27s signature compact design. We&#x27ve also designed a new camera canopy to protect the lens well compatible with both 16X16 and 20X20 flight towers. The frame is made of durable high quality 3K carbon fiber board with excellent performance and fashionable appearance.  NOTE* The only parts compatible with the Explorer LR V2 frame are the front arms、 In the Box 1 X Black TPU 3D Printed Parts  1 X Top plate 1X Bottom plate 1x central plate 2x Front arms 2x Rear arms 2x Side plate 2x Battery straps 1x hardware sets 1x Battery pad 2x insulation sheet

The Explorer LR O3 frame is perfectly designed for the DJI O3 Air unit module while keeping FLYWOO's signature compact design. We've also designed a new camera canopy to protect the lens well compatible with both 16X16 and 20X20 flight towers. The frame is made of durable high quality 3K carbon fiber board with excellent performance and fashionable appearance.  NOTE* The only parts compatible with the Explorer LR V2 frame are the front arms、 In the Box 1 X Black TPU 3D Printed Parts  1 X Top plate 1X Bottom plate 1x central plate 2x Front arms 2x Rear arms 2x Side plate 2x Battery straps 1x hardware sets 1x Battery pad 2x insulation sheet

Explorer LR O3 Frame kit

BetaFPV

BetaFPV Pavo25 2.5" Cinewhoop Frame Kit

BETAFPV

This Frame Kit is for the BETAFPV Pavo25 whoop. The Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stability and protection.

BETAFPV Pavo25 2.5" Cinewhoop Frame Kit

BETAFPV Pavo25 2.5&quot Cinewhoop Frame Kit

Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stable flight and no fear of damage. 

Bullet Point

With the insert copper nut design on the main screw holes, only 6 screws are enough to assemble the whoop duct and drone, which is convenient to build. The Pavo25 frame sports a reasonable structure assembly design that is optimized to decrease complex components, making the build easy.
Made of high-quality PA12 material and 2.5mm carbon fiber. With a strong and durable frame kit, the Pavo25 frame optimizes the vibration damping structure for the camera mount, allowing pilots to get an excellent experience.
An innovative pusher frame with a duct design. It generates more lift for the whole quadcopter, improving the ability of endurance and propulsion.
Equipped with a CNC Vista Adapter. It effectively provides the Caddx Vista HD Digital VTX with a good cool down by increasing the heat dissipation area, reducing the influence of heat on VTX.



CNC Vista Adapter
CNC Vista Adapter effectively provides the Caddx Vista HD Digital VTX with a good cool down by increasing the heat dissipation area, reducing the influence of heat on VTX. It is easy to install and has two mounting angles, which can be mounted by the angle 0° or 45° depending on your needs.
Note: The CNC Vista Adapter is included in the frame kit, if you need to buy it separately, please click here.


Specification

Item: Pavo25 Frame Kit
Wheelbase: 108mm
Color: Black/Transparent Grey/Yellow/Blue/Purple
Material: PA12
Frame Color: Black

Weight: 68g (frame kit), 31.5g (without carbon fiber)
Body Size: 153.2*153.7mm (without EVA adhesive foam)
Top plate thickness: 2.5mm
Propeller size: 2.5-inch
FC pattern: 25.5*25.5mm
FPV cam spacing: 14mm
Recommend Motor: 1404 4500KV Brushless motor

Recommend Props: Gemfan D63-3B (Gray)

Recommend Battery: 4S 750mAh/4S 850mAh

Recommend FC: F405 AIO 20A Toothpick V4 BMI270

Recommend Camera: SMO 4K, DJI Action 2
Recommend VTX: Caddx Nebula Pro Nano Vista Kit/Caddx Baby Ratel2+A03 400mW 5.8G



Package
Frame Kit

1 * Pavo25 Frame Kit
1 * SMO 4K Power Cable
1 * Pavo25 Frame Assembling Guide
1 * CNC Vista Adapter

2 * Spare EVA foam tape (Black)
2 * Spare EVA foam tape (Red)
2 * 180mm Battery Strap
1 * Pack of Screws
1 * Pack of 3D Printed Parts
1 * Rear LED Light
4 * 3M Double-Sided Tapes


Frame (without carbon fiber)

1 * Pavo25 Whoop Frame (without carbon fiber)
2 * Spare EVA foam tape (Black)
2 * Spare EVA foam tape (Red)
4 * 3M Double-Sided Tapes
6 * M2*5 Screws
1 * Screwdriver



Pavo25 frame is made of high-quality PA12 material with strong and durable injected molding, which grants more stable flight and no fear of damage.  Bullet Point With the insert copper nut design on the main screw holes, only 6 screws are enough to assemble the whoop duct and drone, which is convenient to build. The Pa

Pavo25 Frame Kit

Flywoo Firefly Nano Baby FR 40mm 1.6" Frame Kit

This&nbspFrame Kit&nbspis for the&nbspFlywoo Firefly Nano Baby FR Micro Quadcopter which is a freestyle variation of the original.&nbsp

This Frame Kit is for the Flywoo Firefly Nano Baby FR Micro Quadcopter which is a freestyle variation of the original. 

Flywoo Firefly Nano Baby FR 40mm 1.6" 1S Micro Quadcopter - Frame Kit

Flywoo Firefly Nano Baby FR 40mm 1.6&quot 1S Micro Quadcopter - Frame Kit

HolyBro

Holybro Kopis X8 5" Cinelifter Frame Kit - Caged Version

Holybro

This caged version&nbspHolybro Kopis X8 Cinelifter 5&rdquo&nbspFrame Kit&nbspis for the ultimate Kopis Cinelifter!&nbsp

This caged version Holybro Kopis X8 Cinelifter 5” Frame Kit is for the ultimate Kopis Cinelifter! 

Holybro Kopis X8 5&quot Cinelifter Frame Kit - Caged Version

GEPRC GEP-MK5 Mark5 Pro 5" Frame

New Generation freestyle MARK5 frame. The MARK5 Frame is now officially released in three versions,which are standard version, pro version and pro upgrade kits version.The frame is compatible with DJI AIR UNIT, CADDX VISTA and Analog VTX. MARK5 frame is developed specifically for freestyle with squashed X arm design. U

GEPRC GEP-MK5 Pro 5

The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more endurance.
Gopro case available separately.
Check out all out DJI compatible frames, electronics and accessories as well as our whole GEPRC product line!
Features

Aluminum alloy side plates not only look stunning, but reduce weight and add more endurance.
Developed specifically for freestyle with squashed X arm design
The installation hole of VTX is compatible with DJI Air Unit and VISTA, while maintaining the 30.5*30.5 analog VTX installation hole
Unique shock absorbing structure design, less vibrations and resonance
Specially designed independent capacitor and buzzer compartment for better performance and shaking reduction

Specifications

Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm: 5.0mm
FC mounting holes: 30.5mm x 30.5mm
VTX mounting holes: 30.5mm x 30.5mm / 20mm x 20mm
Motor mounting holes: 16mm x 16mm / 19mm x 19mm
Camera installation space: 19-20mm
Suitable propeller size: 5″ propeller
Dimension: 214mm x 168mm x 42mm
Weight: 130.0g

Includes

1 x GepRC Mk5 Pro 5&quot Frame
1 x Battery strap M15x250mm
2 x Battery strap M20x220mm
2 x Battery Silicone Pads
1 x Set of 3D printings
2 x Action camera mount holder
1 x Set of screws
1 x Set of screwdrivers
1 x Antenna fixed tube


The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more enduranc

GEPRC Mark5 Pro 5" Frame - Choose Version from WREKD Co.

GEPRC Mark5 Pro 5

GEPRC Mark5 Pro 5" Frame - Choose Version

The&nbspGEPRC MARK5 Pro Frame Kit&nbspis developed specifically for freestyle with squashed X arm design.&nbsp

The GEPRC MARK5 Pro Frame Kit is developed specifically for freestyle with squashed X arm design. 

GEPRC Mark5 GEP-MK5 5" Freestyle Frame Kit - Black Pro Version 

GEPRC Mark5 GEP-MK5 5&quot Freestyle Frame Kit - Black Pro Version 

The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more endurance.
Gopro case available separately.
Check out all out DJI compatible frames, electronics and accessories as well as our whole GEPRC product line!
Features

Aluminum alloy side plates not only look stunning, but reduce weight and add more endurance.
Developed specifically for freestyle with squashed X arm design
The installation hole of VTX is compatible with DJI Air Unit and VISTA, while maintaining the 30.5*30.5 analog VTX installation hole
Unique shock absorbing structure design, less vibrations and resonance
Specially designed independent capacitor and buzzer compartment for better performance and shaking reduction

Specifications

Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm: 5.0mm
FC mounting holes: 30.5mm x 30.5mm
VTX mounting holes: 30.5mm x 30.5mm / 20mm x 20mm
Motor mounting holes: 16mm x 16mm / 19mm x 19mm
Camera installation space: 19-20mm
Suitable propeller size: 5″ propeller
Dimension: 214mm x 168mm x 42mm
Weight: 130.0g

Includes

1 x GepRC Mk5 Pro 5" Frame
1 x Battery strap M15x250mm
2 x Battery strap M20x220mm
2 x Battery Silicone Pads
1 x Set of 3D printings
2 x Action camera mount holder
1 x Set of screws
1 x Set of screwdrivers
1 x Antenna fixed tube


Foxeer

Foxeer Aura 5" Freestyle Frame

Single replacement front arm for the Foxeer Aura 5" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" DJI Frame Replacement Front Arm (1 Pc.)

Foxeer Aura 5

Single replacement top plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Top Plate

Replacement bottom plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Bottom Plate

The Foxeer Aura Lightweight Long Range frame focuses on long flights and smooth flying. Each frame only weighs just over 70g and is perfect for both freestyle and long-range flying.

Foxeer Aura Lightweight LR Freestyle Frame Kit

Single replacement rear arm for the Foxeer Aura 5" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" DJI Frame Replacement Rear Arm (1 Pc.)

Replacement middle plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Middle Plate

The new Aura 5" Freestyle &amp; Long Range Frame from Foxeer is a great choice for both freestyle or long Range builds. Available in both teal and black. It features deadcat arm geometry, can fit both the DJI full size Air Unit or Vista VTX's and uses high performance T700 carbon for increased stiffness and vibration r

ImpulseRC

ImpulseRC Apex DC 5" Frame Kit

After years of anticipation, the new Apex frame from ImpulseRC is here! Designed in collaboration with Mr Steele, the ApexDC brings improvements to the classic 'dead cat' geometry for freestyle, videography, and mid-range exploring.

ImpulseRC ApexDC FPV Frame

After years of anticipation, the new Apex frame from ImpulseRC is here! Designed in collaboration with Mr Steele, the ApexDC brings improvements to the classic 'dead cat' geometry for freestyle, videography, and mid-range exploring.

Read on for the full list of evolutionary new features!
Features
Unique Arm Geometry
The typical 'dead cat' design moves the front arms outwards while moving the rear arms back and closer into the body. This has the benefit of clearing the camera view of props, however, there are major drawbacks for flight characteristics because the front and rear motors are no longer aligned.
The ApexDC is a variation on this classic 'dead cat' which keeps the front and rear motor aligned to maintain the much loved compressed-x geometry that ImpulseRC brought to the industry. This keeps the frame balanced and flight performance is no longer compromised. By modifying only the upper and lower main plates we retained full compatibility with regular Apex arms, using standard 5" arms at the front and standard 6" arms at the back.
There are no props in shots of DJI HD flight cameras and for slower cinematic flying it's now possible to run GoPro angles lower than ever before.
Custom GoPro Mounting
For quick angle changes, while filming, not many mounts can beat the standard GoPro tab and slot design. However, the stock GoPro bolt leaves a lot to be desired for FPV use.
Included with the Mr Steele version of the ApexDC is not only a 3D printed mount but also a new custom-designed bolt, specifically for FPV use. Our new bolt is machined from aluminum for substantial weight savings and has an 8mm hex on the outside, along with an internal 2.5mm hex broach. Make quick changes to your GoPro angle using either the standard hex driver for M3 bolts or the prop tool for M5 nuts, which you already have with you in your flight bag
Caddx Vista Isolation
A major drawback of the Caddx Vista system is that the body of the unit is grounded, this can cause the conductive carbon fiber plates and frame hardware to be grounded too. In an ideal world, this is not necessarily a problem, however, in the real world, it's an accident waiting to happen.
Alongside the required M2 mounting hardware for the Vista, we also include a die-cut mylar insulator and custom machined 'cone rivets' from non-conductive POM. When installed the Caddx Vista and also the M2 hardware is completely electrically isolated from the frame. This solution adds only 0.5g of extra weight compared to other designs using bulky and heavy 3D prints.
DJI HD Camera Isolation
Like the Caddx Vista itself, certain DJI HD cameras can also ground the frame, with similar unfortunate consequences.
Included with the ApexDC are newly redesigned HD camera plates and 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.
Antenna Mounting
Included in every kit is a 3D printed antenna mount for the Caddx Vista or other similar antennas.
In addition, the Mr Steele version of the kit also includes a standoff mount for the Tracer Immortal-T antenna.
Includes
ApexDC Kit Contents

Carbon fiber frame parts
Hardware and standoffs
Mylar and POM Vista isolation parts
Vista antenna mount
injection-molded skids and bumper
injection-molded wire covers
Rubber and velcro battery pads
Diamond files
Battery strap

Mr Steele Kit Extras
Includes everything in the base kit, along with the following extras:

GoPro mount and custom bolt
Tracer Immortal-T mount
7075-T6 lightweight hardware kit
Coyote Brown skids and bumper
Rubber FC vibration mounts
XT-60 pigtail
Foam strip
Battery strap



After years of anticipation, the new Apex frame from ImpulseRC is here! Designed in collaboration with Mr Steele, the ApexDC brings improvements to the classic 'dead cat' geometry for freestyle, videography, and mid-range exploring. Read on for the full list of evolutionary new features! Features Unique Arm Geometry Th

ImpulseRC ApexDC FPV Frame - Light Weight Mr Steele Edition

Lumenier QAV-PRO Micro Whoop 2.5" Frame

Brain3D

This&nbspTPU Antenna / XT-30 Mount&nbspis for the&nbspLumenier QAV-PRO Micro Whoop - Cinequads Edition.

This TPU Antenna / XT-30 Mount is for the Lumenier QAV-PRO Micro Whoop - Cinequads Edition.

Lumenier QAV-PRO Micro Whoop 2.5" Cinequads Edition - TPU Antenna / XT-30 Mount

Lumenier QAV-PRO Micro Whoop 2.5&quot Cinequads Edition - TPU Antenna / XT-30 Mount

PIRAT

PIRAT Hook Frame (5", 6", 7")

Introducing FPV Pilot Fincky's favorite frame from the French FPV brand PiratFrames!

PIRAT Hook Frame (5&quot, 6&quot, 7&quot)

Get a precise flying experience with the new&nbspPIRAT Hook V2 Frame! The V2 frame now features more durability (even in reverse),&nbspCaddx Vista integration, and&nbspadaptivity to all camera sizes.&nbspDeveloped in collaboration with&nbspPDEVX&nbspFPV&nbsppilot.

Get a precise flying experience with the new PIRAT Hook V2 Frame! The V2 frame now features more durability (even in reverse), Caddx Vista integration, and adaptivity to all camera sizes. Developed in collaboration with PDEVX

PIRAT Hook V2 FPV Drone Frame Kit

GEPRC GEP-CL35 CineLog 35 3.5" Frame

The CineLog35 Frame developed by CEPRC for mounting GoPro camera is now officially released. CL35 is improved and developed on the basis of CL30. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with VISTA HD image tr

GEPRC GEP-CL35 Cinewhoop 3.5

The&nbspCineLog35&nbsphas improved upon the basis of the CineLog30. Featuring an integrated protection guard design, the overall structure is firmer and durable.

The CineLog35 has improved upon the basis of the CineLog30. Featuring an integrated protection guard design, the overall structure is firmer and durable.

GEPRC Cinelog 35 3.5" GEP-CL35 CineWhoop - Frame Kit

GEPRC Cinelog 35 3.5&quot GEP-CL35 CineWhoop - Frame Kit

Summary：
The CineLog35 Frame developed by CEPRC for mounting GP camera is now officially released.
CL35 is improved and developed on the basis of CL30. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with VISTA HD image transmission.The propeller guard adopts an integrated design, and the overall structure is firmer.Upgrade the power system, choose the 12mm x 12mm motor hole position, compared to CL30, it can install a larger 15-18-20 series motor, with a 3.5-inch propeller, it has a stronger power output. Improve the damping rings, the shooting effect is more stable and clearer.It has an stronger mounting compatibility, you can use 3D prints to install the full size GP8、GP9、GP10 camera or use the base to install naked camera GP8, Insta 360 GO2 and Caddx Peanut cameras.
We pursue lighter body weight, better flying feel, and more extended functions.

Specification:

 	Model: GEP-CL35
 	Motor to Motor: 142mm
 	Top plate: 2.5mm
 	Bottom plate: 2.0mm
 	Arm Plate:3.5mm
 	FC mounting hole: 25.5mm x 25.5mm
 	VTX hole position: 20mm x 20mm
 	Motor hole position: 12mm x 12mm
 	Camera installation space: 14~19mm
 	Propeller guard internal diameter: 95mm
 	Suitable propeller size: 3.5 inch propeller
 	Dimension: 203mm x 203mm x 42mm（Include propeller guard）
 	Weight:130.7g（Include propeller guard,GP camera camera mount,3D printings）

Feature:

 	
Integrated protection guard design, the overall structure is firmer and durable.

 	
Improve the damping rings, the shooting effect is more stable and clearer.

 	
CineLog35 has a great mount compatibility, you can install GP10, GP9, GP8, or Naked camera GP8,Insta 360 GO2 camera and Caddx Peanut camera.

 	
12mm x 12mm motor holes can be installed with 15-18-20 motors, and the power output is strong with 3.5-inch propellers.

 	
The design of open holes on the side of the propeller guard greatly reduces the noise during flight.

 	
Independent receiver cabin,and binding is convenient and fast.


Include:

 	1 x Top Plate 2.5mm
 	1 x Arm Plate 3.5mm
 	1 x Bottom Plate 2.0mm
 	2 x Propeller guards
 	1 x Power cable combination
 	1  x  Screw combination
 	1  x  Screwdriver combination
 	1  x  3D Print mountings combination
 	1 x Other Parts

Summary： The CineLog35 Frame developed by CEPRC for mounting GP camera is now officially released. CL35 is improved and developed on the basis of CL30. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with VISTA HD image [...]

GEP-CL35 Frame - GEPRC

GEP-CL35 Frame

Camera Size

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 

FPV Cameras

GEPRC GET-ST16 Smart 16 1.6" Frame

Introducing... the&nbspGEPRC SMART 16 Freestyle Frame Kit!

Introducing... the GEPRC SMART 16 Freestyle Frame Kit!

GEPRC SMART 16 1.6" Nano Freestyle Drone - Frame Kit

GEPRC SMART 16 1.6&quot Nano Freestyle Drone - Frame Kit

EMAX

EMAX TinyHawk III Frame Kit

This&nbspframe kit&nbspis for the&nbspEMAX TinyHawk III&nbspQuadcopter.

This frame kit is for the EMAX TinyHawk III Quadcopter.

Flywoo Firefly Nano Baby V1.2 40mm 1.6" Frame Kit

This&nbspframe kit&nbspis for the&nbspFirefly Nano Baby Quad,&nbspwhich is a 20g ultralight 1S drone for freestyle and cruising.

This frame kit is for the Firefly Nano Baby Quad, which is a 20g ultralight 1S drone for freestyle and cruising.

Flywoo Firefly Nano Baby 40mm 1.6" 1S Frame Kit - V1.2

Flywoo Firefly Nano Baby 40mm 1.6&quot 1S Frame Kit - V1.2

GEPRC GEP-CL30 CineLog 30 3" Frame

Summary：
The latest 3-inch rack CL30 developed by GEPRC is now officially released.
CL30 is improved and developed on the basis of CL25. It continues the 26.5x26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the market. The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades. Improved the shock absorption design of the damping platform to provide more stable shooting effect.Ultra-light body weight. Naked camera GP8 and Insta 360 Go2 camera can be installed with GP camera mount.
We pursue lighter body weight, better flying feel, and more extended functions frame.

Specification:

 	Brand: GEPRC
 	Model: GEP-CL30
 	Motor to Motor: 126mm
 	Top plate: 2.0mm
 	Bottom plate: 2.0mm
 	Arm Plate3.0mm
 	FC mounting hole: 25.5mm x 25.5mm
 	VTX hole position: 20mm x 20mm
 	Motor hole position: 9mm x 9mm
 	Camera installation space: 14~19mm
 	Propeller guard internal diameter: 79mm
 	Suitable propeller size: 3 in propeller
 	Dimension: 180mm x 180mm x 38mm（Includes propeller guard）
 	Weight:62.6g（Includes propeller guard, GP camera mount, 3D printings）

Feature:

 	
Small size, light weight, good flying feel.

 	
Improved the shock absorption design of the damping platform to provide a more stable shooting effect.

 	
The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades.

 	
Naked camera GP8 and Insta 360 Go2 camera can be installed with GP camera mount.

 	
A 3D print is designed for the receiver to facilitate the installation and binding of the receiver.


Include:
Carbon Plate:

 	1 x Top Plate 2.0mm
 	1 x Arm Plate 3.0mm
 	1 x bottom Plate 2.0mm

Screws:

 	2 x Knurled nut M2
 	4 x Aluminum Column M2x3.5x25
 	2 x M2x4mm cup head screws
 	28 x M2x6.5mm round head screws
 	10 x M2x8mm round head screws
 	7 x M2x9mm round head screws
 	4 x M2x10mm round head screws
 	1 x M2x12mm cup head screw
 	4 x M2x16mm cup head screws
 	1 x M2 Rivet nut
 	4 x M2 Lock nuts
 	8 x M2 Iron nuts
 	8 x M2 * 6.5mm damping rings
 	9 x damping platform rings

3D Printings:

 	1 x 19x19mm Camera Mount
 	1 x VTX Antenna Mount
 	1 x TBS T-shaped Antenna Mount
 	1 x TBS NanoRX Mount
 	1 x Camera Protector

Injection Parts:

 	6 x 3 in Propeller Guard
 	1 x GP Camera Mount

Other Parts:

 	4 x EVA Damping Ring of Guards
 	2 x 3M Double Tapes
 	2 x Silicone Pads
 	2 x Landing Pads
 	1 x M15x200mm Battery Strap
 	1 x M15x150mm Battery Strap
 	1 x L-shaped (1.5mm)
 	1 x Antenna Tubes

Summary： The latest 3-inch rack CL30 developed by GEPRC is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the [...]

GEP-CL30 Frame Kits - GEPRC

GEP-CL30 Frame Kits

framesThe latest 3-inch rack CL30 developed by GEPU is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the mark

GEPRC GEP-CL30 Cinewhoop 3

This&nbspGEP-CL30&nbspFrame kit&nbspis for the&nbspGEPRC CineLog30&nbspcinewhoop.

This GEP-CL30 Frame kit is for the GEPRC CineLog30 cinewhoop.

GEPRC CineLog 30 3" GEP-CL30 Frame Kit

GEPRC CineLog 30 3&quot GEP-CL30 Frame Kit

Lumenier QAV-PRO 5" Whoop Frame

The Lumenier QAV-PRO WHOOP Cinequads Edition Kit is a versatile 5-inch caged FPV quadcopter that is designed to be durable and agile while offering full propeller protection. This whoop has the incredible ability to carry full-sized professional cinema cameras, such as the Blackmagic Cinema Pocket 4K or the RED KOMODO 

Lumenier QAV-PRO Whoop 5

This Frame Kit is the Lumenier QAV-PRO WHOOP Cinequads Edition, which is a versatile 5-inch prop-guarded FPV drone kit that is designed to be durable and agile while offering full propeller protection and the ability to carry professional cinema cameras.

This Frame Kit is the Lumenier QAV-PRO WHOOP Cinequads Edition, which is a versatile 5-inch prop-guarded FPV drone kit that is designed to be durable and agile while offering full propeller protection and the ability to carry professional cinema came

Lumenier QAV-PRO Whoop 5" Cinequads Edition - Frame Kit

Lumenier QAV-PRO Whoop 5&quot Cinequads Edition - Frame Kit

iFlight

iFlight ProTek35 3.5" HD Cinewhoop Frame

This frame kit is for the&nbspiFlight ProTek35 HD&nbspCinewhoop.

This frame kit is for the iFlight ProTek35 HD Cinewhoop.

iFlight ProTek35 3.5" HD Cinewhoop Frame Kit

iFlight ProTek35 3.5&quot HD Cinewhoop Frame Kit

After our very popular 3inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, iFlight was trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.  iFlight's all-new 3.5inch project is finally ready for all you content creators or those

ProTek35 HD CineWhoop Frame Kit

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Motor Stator Size

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 