FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Five33

Five33 LightSwitch Frame Kit


Why LightSwitch?
The design constraints were simple. Lighter, Stronger, more convenient , and at whatever cost that entails. We wanted to pursue the next level of racing frames.

Starting from square one on a new frame this year was quite the challenge, but with the team we brought together of amazing pilots the good ideas never stopped flowing! Being so confident in our first prototype that we bought dozens of frames to outfit our pilots, only to have a fatal design flaw that forced us to drop the design all together was quite discouraging. But we didn’t stop. Once Armando started drawing on napkins I knew something spectacular was around the corner. And the LiteSwitch is born! The world class list of pilots flying these at IO will leave no one doubting the legitimacy of this new model, and you can keep an eye out for all the podium finish posts coming throughout the week.



Time is anyones biggest enemy while on the track, every second counts, if you want to shave the milliseconds, invest in the gear and company that does it ever weekend! Thanks so much to our amazing customer base as we near 3 years in business, we would not be where we are without you all and we cannot wait for the next 30!


By making the switch:


Noical cut 20g




Shames cut 21g




Mondo cut 15g




Headsup cut 15g




MCK cut 15g


So, make the light switch!
T700 lite arms use T700 carbon as opposed to 7300 arms, for those willing to spare no expense to have the most premium frame. These are for you.
What’s new?
Simplified Build

SSRS v1.7

The Shames Strain Relief System! Shames has nightmares about tearing off ESC pads in crashes, so we tested and tested until we optimized the SSRS system for the LightSwitch.
Wiggle-eating TPU bits

Team pilots, MCK, Propsicle, and Noical, fly 1000s of packs a week and found that the previous versions of our wiggle plate would wear out after several arm swaps. We take arm slop seriously at 533, so we developed the Wiggle Eater! The small TPU bits compress between the spine and bottom plate to fill any gaps and keep your arms locked.
What’s Included?


Protective Top Plate 




Mid Plate




Bottom Plate




Spine




Wiggle Eaters (TPU)




Universal Nano Cam Mount (TPU)




SMA Mount (TPU)




Turtle Fin (TPU)




6 23 M3 Standoffs




6 20mm M3 Standoffs




20mm M3 Titanium Stack screws




25mm M3 Titanium Stack Screws




4 5.5mm thick arms (Select Length above)




6 cable ties


Build Video


Why LightSwitch? The design constraints were simple. Lighter, Stronger, more convenient , and at whatever cost that entails. We wanted to pursue the next level of racing frames. Starting from square one on a new frame this year was quite the challenge, but with the team we brought together of amazing pilots the good id

LightSwitch Frame Kit

The design constraints were simple. Lighter, Stronger, more convenient , and at whatever cost that entails. We wanted to pursue the next level of racing frames. Check out our Five33 Ligthswitch Parts and the rest of our Five33 Products! Starting from square one on a new frame this year was quite the challenge, but with

Five33 Lightswitch 5

FIVE33

To keep it simple, this was the thesis for the design constraints of this frame, lighter, stronger, and more convenient. With a team of amazing pilots and an endless supply of good ideas. Five33 sought and brought you this next-level racing frame. This Lightswitch frame kit features T700 lite arms use T700 carbon as opposed to 7300 arms, for those willing to spare no expense to have the most premium frame. 
Check out all our 5" frames and all our FIVE33 Flying Gear!


Specifications

Weight: 45g
Dimensions: 7.5x13x2.5
Arm Option: Lite T700 Arms
TPU Color: Championship Teal
Motor Bolt Mounting: 16x16 
Top &amp Bottom Plate thickness: 2mm
Middle Plate thickness: 2mm
Arm thickness: 5.5mm

3d printed parts available HERE
Includes

FIVE33 LightSwitch 5" Racing Frame Kit
1x Slim Lite Top Plate
1x Protective Top Plate (as pictured)
1x Mid Plate
1x Bottom Plate
1x Spine
1x Wiggle Eaters (TPU)
1x Universal Nano Cam Mount (TPU)
1x SMA Mount (TPU)
1x Turtle Fin (TPU)
6x 23 M3 Standoffs
6x 20mm M3 Standoffs
20mm m3 Titanium Stack screws
25mm M3 Titanium Stack Screws
4x 5.5mm thick arms 
6x cable ties


To keep it simple, this was the thesis for the design constraints of this frame, lighter, stronger, and more convenient. With a team of amazing pilots and an endless supply of good ideas. Five33 sought and brought you this next-level racing frame. This Lightswitch frame kit features T700 lite arms use T700 carbon as op

FIVE33 LightSwitch 5" Racing Frame Kit - Lite T700 Arms

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

Five33 Switchback Zero Frame Kit

CLEARANCE SALE
 
Designed in collaboration with HDZero, this frame is made to pair perfectly with the HD Race vtx v2 and the whoop size HDzero vtx.

The midplate has 30x30 and 20x20 stack mounting options and the Top plate has 25.5x25.5 mounting available.

Compatible front brace: https://flyfive33.com/product/front-or-back-brace-sb-zero-lite/

Thingiverse Listing:  https://www.thingiverse.com/thing:4933552

Has 20x20, 30x30, and 25.5x25.5 mounting options.Works with all Switchback PRO arms.
Listed with ExportYourStore.com

CLEARANCE SALE   Designed in collaboration with HDZero, this frame is made to pair perfectly with the HD Race vtx v2 and the whoop size HDzero vtx. The midplate has 30x30 and 20x20 stack mounting options and the Top plate has 25.5x25.5 mounting available. Compatible front brace: https://flyfive33.com/product/front-or-b

Five33 Switchback Zero 5" Frame Kit

My Store

Switchback Zero Frame Kit

Designed in collaboration with HDZero, this frame is made to pair perfectly with the HD Race vtx v2 and the whoop size HDzero vtx. The midplate has 30×30 and 20×20 stack mounting options and the Top plate has 25.5×25.5 mounting available. Has 20×20, 30×30, and 25.5×25.5 mounting options. Works with all Switchback PRO a

Five33 Switchback Zero 5

Five33 Switchback Pro Frame Kit










Note: Choose your arms type and if you want prints with your frame kit. 
"The podium owning: Switchback, Optimized and Refined. Stiffer, smaller, 20x20 only."









The FIVE33 Switchback PRO 5" Racing Frame Kit is engineered to provide pilots with optimal performance, durability and stability. The lightweight, durable carbon fiber frame features low tolerance arms for an extra tight build. The FIVE33 Switchback PRO This frame is sure way to provide pilots an edge in any race.
Check out all our Five33 5" Frames and all our FIVE33 Flying Gear!


















Feature

Arms for this frame are interchangeable 
Lite arms = 33g   SFG arms = 35g
SFG: The SFG arms are compatible with all Switchback V1 braces, SFGs, &amp BFGs
Lite(SPLT): Smallest possible arm length that can fit 5.1″ props







Specifications

Weight 73.8g (Prints Included)
Dimensions: 6 x 12.70 x 0.25 cm 

Arm Option SPLT Arms or SFG Arms
TPU Color Championship Teal (Optional)
Motor Bolt Mounting: 16x16 &amp 19x19
Stack Mounting: 20x20

Bottom Plate: 2mm
Arm Thickness: 5mm
Anti-Wiggle-Plate: 3mm
Mid Plate w/ Press Nuts Installed: 2mm
Top Plate: 2mm

3d printed parts available HERE
Includes

1x FIVE33 Switchback PRO 5" Racing Frame Kit - Choose Your Version


Note: Choose your arms type and if you want prints with your frame kit.  "The podium owning: Switchback, Optimized and Refined. Stiffer, smaller, 20x20 only." The FIVE33 Switchback PRO 5" Racing Frame Kit is engineered to provide pilots with optimal performance, durability and stability. The lightweight, durable carbon

FIVE33 Switchback PRO 5" Racing Frame Kit - Choose Your Version

The podium owning Switchback, Optimized and Refined. Stiffer, smaller, 20×20 only. IMPORTANT NOTE: TPU Parts not are not included and can be purchased separately HERE. Or you can print your own. Thingiverse Listing:  https://www.thingiverse.com/thing:4933552 Arms are also sold separately in three versions: Lite, Longba

Five33 Switchback Pro 5

CLEARANCE SALE
 
Noical BETAFLIGHT 4.3 TUNE: https://bit.ly/38T5E1b

https://youtu.be/c52LLbbdtrw

TPU mounts: https://www.thingiverse.com/thing:4672081



Lite:

Smallest possible arm length that can fit 5.1" props

AKA the SmolBack



Longback:

The smoothest flying switchback

Can fit 6" props but we recommend running with 5.1"



SFG:

The SFG arms are compatible with all Switchback V1 braces, SFGs, &amp BFGs

 

Listed with ExportYourStore.com

CLEARANCE SALE   Noical BETAFLIGHT 4.3 TUNE: https://bit.ly/38T5E1b https://youtu.be/c52LLbbdtrw TPU mounts: https://www.thingiverse.com/thing:4672081 Lite: Smallest possible arm length that can fit 5.1" props AKA the SmolBack Longback: The smoothest flying switchback Can fit 6" props but we recommend running with 5.1"

Switchback Pro Frame Kit

Five33 TinyTrainer Frame Kit

The TinyTrainer was developed for Evan "Headsup" Turner to practice flying big drones in his little backyard but became so much more. The flight characteristics of this drone, with the recommended build, result in a racing experience only found in the PRO FPV racing leagues.

Frame supports 16 x 16 stacks and 25 mm toothpick AIO boards. Supports both 9mm and 12mm mounting pattern motors.

Package includes:


Qty 1 Tiny Trainer 2mm Carbon Frame




Qty 1 TPU Parts Set (Cam Mount, Battery Tray, Fin, vtx mount)




Qty 1 Poly-carbonate canopy




Qty 8 6 mm M2 Button Head Hex Drive Screw




Qty 4 16 mm  M2 Button Head Hex Drive Screw




Qty 8 M2 nylon Nuts




Qty 4 16 mm M2 Standoffs




Qty 8 4" Nylon Cable Ties



Betaflight 4.2 + RPM filtering Diff &gt&gt&gt https://bit.ly/2VI864F

Kit includes all pictured tpu parts, but TPU part STL files can also be found here:https://www.thingiverse.com/thing:4315912



TinyTrainer Spec:


TinyTrainer Frame (No arm modifications)




Tiny Turner 1404 Motors




HQProp Headsup TinyProp




3S Battery (4.35v max per cell)




160g Minimum All Up Weight




50g Max Battery Weight




at least 8 LEDs



The TinyTrainer was developed for Evan "Headsup" Turner to practice flying big drones in his little backyard but became so much more. The flight characteristics of this drone, with the recommended build, result in a racing experience only found in the PRO FPV racing leagues. Frame supports 16 x 16 stacks and 25 mm toot

TinyTrainer Frame Kit











FIVE33 TinyTrainer 3" Frame Kit was engineered by Evan "HeadsUp" Turner, two-time Drone Racing League World Champion. Created to enable Turner to train for the DRL season in his own backyard, this frame was meticulously design and refined to offer all the exhilaration of professional drone racing in a compact package. All components are selected for reliability and efficiency, making this quad suitable for racing and freestyle alike. This frame kit is comes with smoke and black canopies, also choose between which color of 3D prints of black and teal.










Check out our other 3" frames, and FIVE33 Flying Gear!

Specification

TPU Color: Teal or Black

Canopy Color: Black &amp Smoke
Motor Bolt Mounting: 9x9mm &amp 12x12mm

Stack Mounting: 16x16mm &amp 25.5x25.5mm
Weight: 45.5g

Body Plate Thickness: 3mm

Includes

1x FIVE33 TinyTrainer 3" Micro Frame Kit - Choose Your Color
1x FIVE33 TinyTrainer 3" Body Plate w/ Hardware
1x FIVE33 TinyTrainer Canopy - Black 
1x FIVE33 TinyTrainer Canopy - Smoke
1x FIVE33 TinyTrainer TPU Kit 


FIVE33 TinyTrainer 3" Frame Kit was engineered by Evan "HeadsUp" Turner, two-time Drone Racing League World Champion. Created to enable Turner to train for the DRL season in his own backyard, this frame was meticulously design and refined to offer all the exhilaration of professional drone racing in a compact package. 

FIVE33 TinyTrainer 3" Micro Frame Kit - Choose Your Color

Five33 TinyTrainer 3" Micro Frame Kit

Five33 TinyTrainer V2 3" Micro Frame Kit












Tiny Trainer V2: improved on the V1 with an arm removal system that uses steel M3 screws, quick-fix canopy design, and integrated injection-molded camera mount. Arms are 3mm thick, break one in the field? Just take off the motor, unscrew the arm, and bolt on a new one. Canopy opens with two screws for full access to internals. Camera mount supports 30-60 and 5-25 degree angles. The perfect frame looking to train those tight lines in races. 











Check out our other 3" frames, and FIVE33 Flying Gear!
STL Files available here: https://www.printables.com/model/368444-five33-tinytrainerv2-tpu-parts


 Specifications 

Canopy Color: Black 
Motor Bolt Mounting: 9x9mm &amp 12x12mm

Stack Mounting: 16x16mm &amp 25.5x25.5mm
Arm Thickness: 3mm

Includes

1x FIVE33 TinyTrainer V2 3" Micro Frame Kit w/out TPU


Tiny Trainer V2: improved on the V1 with an arm removal system that uses steel M3 screws, quick-fix canopy design, and integrated injection-molded camera mount. Arms are 3mm thick, break one in the field? Just take off the motor, unscrew the arm, and bolt on a new one. Canopy opens with two screws for full access to in

FIVE33 TinyTrainer V2 3" Micro Frame Kit w/out TPU

Tiny Trainer V2

Everything about the V1, just better.

The biggest complaints over the 2 years Tiny Trainers have been flying around the world are



"I hate when I break the base plate in a hard crash. I have to swap over my entire build to a new plate, ending my day of flying."





" I can't stand that I have to unscrew 4 screws AND cut 4 Zip ties just to open up the body of the drone"





"I'm tired of messing with TPU camera mounts, my printer never works, and I hate buying prints"





"I prefer mounting batteries with a battery strap, my other micros even let me use rubber bands!"



Removable Arms

Tiny Trainer V2 comes standard with 3mm thick, ONE screw arm removal. Not only that, it uses steel M3 screws, so you never have to worry about stripping a screw when tightening your arms. Break an arm in the field? Take off your motor, pull the arm screw and bolt your new one on. You're back in the air within 5 minutes.

Quick Fix Canopy Design

Taking the canopy off the Tiny Trainer V1 got old fast, now its as simple as loosening 2 screws. Once the back 2 screws are loosened (not removed) the entire body of the Tiny Trainer V2 unfolds, giving you access to 100 percent of the internals of the drone.  You're ready to go fly, pull the hood back down, tighten up your screws, and rip! This drone is easier to work on than ever.

Integrated Injection Molded Camera Mount

No more dealing with 3D printed camera mounts, The Tiny Trainer V2 integrates a beautiful nano cam mount into the front of the Canopy. 2 mounting points available allowing a 30-60 degree mount and 5-25 degree mount! All while being fully integrated in the injection Molded Canopy.

Customizable Battery Solution

Armandos design allows for the use of the battery tray V2 (recommended for 550 mah 3s), Micro battery strap, and even rubber bands. You can use nearly ANY battery on a Tiny Trainer V2.

 

STL Files available here: https://www.printables.com/model/368444-five33-tinytrainerv2-tpu-parts

 



 



Tiny Trainer V2 Everything about the V1, just better. The biggest complaints over the 2 years Tiny Trainers have been flying around the world are "I hate when I break the base plate in a hard crash. I have to swap over my entire build to a new plate, ending my day of flying." " I can't stand that I have to unscrew 4 sc

Tiny Trainer V2

Everything about the V1, just better.

The biggest complaints over the 2 years Tiny Trainers have been flying around the world are



&quotI hate when I break the base plate in a hard crash. I have to swap over my entire build to a new plate, ending my day of flying.&quot





&quot I can&#39t stand that I have to unscrew 4 screws AND cut 4 Zip ties just to open up the body of the drone&quot





&quotI&#39m tired of messing with TPU camera mounts, my printer never works, and I hate buying prints&quot





&quotI prefer mounting batteries with a battery strap, my other micros even let me use rubber bands!&quot



Removable Arms

Tiny Trainer V2 comes standard with 3mm thick, ONE screw arm removal. Not only that, it uses steel M3 screws, so you never have to worry about stripping a screw when tightening your arms. Break an arm in the field? Take off your motor, pull the arm screw and bolt your new one on. You&#39re back in the air within 5 minutes.

Quick Fix Canopy Design

Taking the canopy off the Tiny Trainer V1 got old fast, now its as simple as loosening 2 screws. Once the back 2 screws are loosened (not removed) the entire body of the Tiny Trainer V2 unfolds, giving you access to 100 percent of the internals of the drone.  You&#39re ready to go fly, pull the hood back down, tighten up your screws, and rip! This drone is easier to work on than ever.

Integrated Injection Molded Camera Mount

No more dealing with 3D printed camera mounts, The Tiny Trainer V2 integrates a beautiful nano cam mount into the front of the Canopy. 2 mounting points available allowing a 30-60 degree mount and 5-25 degree mount! All while being fully integrated in the injection Molded Canopy.

Customizable Battery Solution

Armandos design allows for the use of the battery tray V2 (recommended for 550 mah 3s), Micro battery strap, and even rubber bands. You can use nearly ANY battery on a Tiny Trainer V2.

 

STL Files available here: https://www.printables.com/model/368444-five33-tinytrainerv2-tpu-parts

 



 



Five33 TinyTrainer V2 Frame Kit from WREKD Co.

Five33 TinyTrainer V2 Frame Kit

Tiny Trainer V2 Everything about the V1, just better. The biggest complaints over the 2 years Tiny Trainers have been flying around the world are “I hate when I break the base plate in a hard crash. I have to swap over my entire build to a new plate, ending my day of flying.” ” I can’t stand that I have to unscrew 4 sc

Five33 TinyTrainer V2 Full Kit W/Canopy & Battery Tray

Five33 LightSwitch V2 Ultra Frame Kit

Our 49 gram Racing Frame
Lightswitch ULTRA
Five33's latest take on a frame built for maximum performance. Winning the French National Championship before launch (Piloted by Darkex) the Lightswitch Ultra has proven to give pilots the competitive edge and confidence they need to succeed. Utilizing our Lightswitch V2 Spine System for stiffness, the frame remains stiff even at its sub 50 gram weight. The top pilots and community put their thoughts out in the world as to what they wanted from the next generation of Five33 frames, we couldn't be happier with the result. Everything great about our LIGHTSWITCH V2 but Smaller and Lighter!
Watch the Keynote: https://youtu.be/i6KnfZNTzEM?si=ZXFVmhOSr9dw5-Wx
Design Goals:

50 grams or less ✓

Fit all 20x20 ESCS (yes, it fits a Foxeer Slim) ✓

Stiff beyond belief ✓


Body Kit Includes:

Qty 1 2mm Bottom PlateT700 Carbon
Qty 1 2mm Mid Plate T700 Carbon
Qty 1 2mm Top Plate T700 Carbon
Qty 2 2mm Longitudinal Stiffeners T700 Carbon
Qty 4 20mm M3 ButtonHead Screw (Titanium)
Qty 4 25mm M3 ButtonHead Screw (Titanium)
Qty 4 20mm M3 Aluminum Standoff
Qty 4 23mm M3 Aluminum Standoff
Qty 4 8mm M3 Socket Head Aluminum Screw
Qty 2 10mm M3 Flat Head (12.9 Grade YFS)
Qty 4 16mm M3 Flat Head (12.9 Grade YFS)
Qty 8 Nylon M3 Nut

Arm Kit Includes:

Qty 5 5mm LS V2 Ultra Arms

3D Files available here: https://www.printables.com/model/500906-five33-lightswitch-v2-ultra

Our 49 gram Racing Frame Lightswitch ULTRA Five33's latest take on a frame built for maximum performance. Winning the French National Championship before launch (Piloted by Darkex) the Lightswitch Ultra has proven to give pilots the competitive edge and confidence they need to succeed. Utilizing our Lightswitch V2 Spin

Our 49 gram Racing Frame
Lightswitch ULTRA
Five33&#39s latest take on a frame built for maximum performance. Winning the French National Championship before launch (Piloted by Darkex) the Lightswitch Ultra has proven to give pilots the competitive edge and confidence they need to succeed. Utilizing our Lightswitch V2 Spine System for stiffness, the frame remains stiff even at its sub 50 gram weight. The top pilots and community put their thoughts out in the world as to what they wanted from the next generation of Five33 frames, we couldn&#39t be happier with the result. Everything great about our LIGHTSWITCH V2 but Smaller and Lighter!
Watch the Keynote: https://youtu.be/i6KnfZNTzEM?si=ZXFVmhOSr9dw5-Wx
Design Goals:

50 grams or less ✓

Fit all 20x20 ESCS (yes, it fits a Foxeer Slim) ✓

Stiff beyond belief ✓


Body Kit Includes:

Qty 1 2mm Bottom PlateT700 Carbon
Qty 1 2mm Mid Plate T700 Carbon
Qty 1 2mm Top Plate T700 Carbon
Qty 2 2mm Longitudinal Stiffeners T700 Carbon
Qty 4 20mm M3 ButtonHead Screw (Titanium)
Qty 4 25mm M3 ButtonHead Screw (Titanium)
Qty 4 20mm M3 Aluminum Standoff
Qty 4 23mm M3 Aluminum Standoff
Qty 4 8mm M3 Socket Head Aluminum Screw
Qty 2 10mm M3 Flat Head (12.9 Grade YFS)
Qty 4 16mm M3 Flat Head (12.9 Grade YFS)
Qty 8 Nylon M3 Nut

Arm Kit Includes:

Qty 5 5mm LS V2 Ultra Arms

3D Files available here: https://www.printables.com/model/500906-five33-lightswitch-v2-ultra

Five33 LightSwitch V2 Ultra Frame Kit from WREKD Co.

NewBeeDrone

NewBeeDrone Turismo 5'' Frame

This is NewBeeDrone's first 5inch light weight frame for racing and freestyle. 
Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a whoop-size AIO board, then we suggest a build with an analog vtx setup or set it up with the Caddx Vista for that digital HD cruising. If you decide to pair this ultralight frame with a signature NewBeeDrone 20x20 series stacks (Infinity200 or CricketFPV stack) then an analog vtx build is the way to go.
At-A-Glance Frame Breakdown:

Motor Layout Type: Stretched-X configuration (longer front-to-back, than side-to-side)

Motor-to-Motor: 211mm
Cam Mounting: 14x14mm
Motor Mounting hole spacing: 4-holes spaced on a 12mm diameter
Stack Mounting: Whoop AIO board - 25.4x25.4mm (1x1inch) and 20x20 stack
Weight: (with Caddx Vista mount and TPU arm guards)  -  53g


Include:Top Plate x1Bottom Plate x1Side Camera Plate x2Arm left x2Arm Right  x2Cross Plate x23D Print Part Arm edge protect x43D Print Part Vista mount x1
Recommend build: 1. NewBeeDrone Turismo 5inch Frame2. NewBeeDrone Flow 2004 motor3. JHEMCU GHF405 BLHELI_S 35A 3-6S AIO for Racing Toothpick4. Gemfan 5125 Hurricane Durable 3 Blade 1.5mm5. Caddx Vista with Nebula nano kit V2
Instruction: Link
3DPrinted part file: Link

This is NewBeeDrone's first 5inch light weight frame for racing and freestyle.  Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a

NewBeeDrone Turismo 5'' light weight frame for Racing and Freestyle


This is NewBeeDrone&#39s first 5inch light weight frame for racing and freestyle. 
Introducing the Turismo Frame. The Turismo Frame is an offering for the ultralight 5inch enthusiast who wants a versatile, ultralight frame to build a locked-in setup with a sturdy roll-cage for the ‘goods’ inside. Pairing this frame with a whoop-size AIO board, then we suggest a build with an analog vtx setup or set it up with the Caddx Vista for that digital HD cruising. If you decide to pair this ultralight frame with a signature NewBeeDrone 20x20 series stacks (Infinity200 or CricketFPV stack) then an analog vtx build is the way to go.
At-A-Glance Frame Breakdown:

Motor Layout Type: Stretched-X configuration (longer front-to-back, than side-to-side)

Motor-to-Motor: 211mm
Cam Mounting: 14x14mm
Motor Mounting hole spacing: 4-holes spaced on a 12mm diameter
Stack Mounting: Whoop AIO board - 25.4x25.4mm (1x1inch) and 20x20 stack
Weight: (with Caddx Vista mount and TPU arm guards)  -  53g


Include:Top Plate x1Bottom Plate x1Side Camera Plate x2Arm left x2Arm Right  x2Cross Plate x23D Print Part Arm edge protect x43D Print Part Vista mount x1
Recommend build: 1. NewBeeDrone Turismo 5inch Frame2. NewBeeDrone Flow 2004 motor3. JHEMCU GHF405 BLHELI_S 35A 3-6S AIO for Racing Toothpick4. Gemfan 5125 Hurricane Durable 3 Blade 1.5mm5. Caddx Vista with Nebula nano kit V2
Instruction: Link
3DPrinted part file: Link

NewBeeDrone Turismo 5'' light weight frame for Racing and Freestyle from WREKD Co.

Quadifier

Quadifier Python Racing 5" Frame Kit

The Quadifier Python is an ultralight race frame with 0 compromises. The Python is a race frame that fit all of my requirements for racing. It is super strong while maintaining an impressive weight 60 grams.
Be sure to check out all our 5" frames, and all our Quadifier products! 
Features

Designed for 20x20 stacks
Slight Stretch X for more efficient flight
5mm arms
Fits only nano 14x14 size cameras


Specification


Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 16x16 M3
Main Plate Thickness: 2mm
Frame Shape: Slight Stretched X
Motor to Motor: 200mm
Arm Thickness: 5mm
Frame Weight With TPU: 70g


Includes

1x Quadifier Python 5" Racing Frame Kit
1x TPU Kit


The Quadifier Python is an ultralight race frame with 0 compromises. The Python is a race frame that fit all of my requirements for racing. It is super strong while maintaining an impressive weight 60 grams. Be sure to check out all our 5" frames, and all our Quadifier products!  Features Designed for 20x20 stacks Slig

The Quadifier Python is an ultralight race frame with 0 compromises. The Python is a race frame that fit all of my requirements for racing. It is super strong while maintaining an impressive weight 60 grams.
Be sure to check out all our 5&quot frames, and all our Quadifier products! 
Features

Designed for 20x20 stacks
Slight Stretch X for more efficient flight
5mm arms
Fits only nano 14x14 size cameras


Specification


Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 16x16 M3
Main Plate Thickness: 2mm
Frame Shape: Slight Stretched X
Motor to Motor: 200mm
Arm Thickness: 5mm
Frame Weight With TPU: 70g


Includes

1x Quadifier Python 5&quot Racing Frame Kit
1x TPU Kit


Quadifier Python Racing 5" Frame Kit from WREKD Co.

Quadifier Python Racing 5

Quadifier Mamba Racing 3" Micro Frame Kit

The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.
Be sure to check out all our micro frames, and all our Quadifier products! 

Features

Designed for 20x20 stacks

Stretch X for more efficient flight

3.5mm unibody bottom plate
2mm top plate

Fits only nano 14x14 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 3.5mm
Frame Shape: Slight Stretched X
Motor to Motor: 160mm
Arm Thickness: 3.5mm
Frame Weight With TPU: 30g


Includes

1x Quadifier Mamba Racing 3" Micro Frame Kit - Choose Your Color
1x TPU Kit


The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your qua

Quadifier Mamba Racing 3" Micro Frame Kit - Choose Your Color

The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. 
Be sure to check out all our micro frames, and all our Quadifier products! 
Features

Designed for 20x20 stacks

Stretch X for more efficient flight

3.5mm unibody bottom plate
2mm top plate

Fits only nano 14x14 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 3.5mm
Frame Shape: Slight Stretched X
Motor to Motor: 160mm
Arm Thickness: 3.5mm
Frame Weight With TPU: 30g


Includes

1x Quadifier Mamba Racing 3&quot Micro Frame Kit 
1x TPU Kit


The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Be sure to check out all our micro frames, and all our Q

Quadifier Mamba Racing 3" Micro Frame Kit from WREKD Co.

Quadifier Mamba Racing 3

The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.
Be sure to check out all our micro frames, and all our Quadifier products! 

Features

Designed for 20x20 stacks

Stretch X for more efficient flight

3.5mm unibody bottom plate
2mm top plate

Fits only nano 14x14 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 3.5mm
Frame Shape: Slight Stretched X
Motor to Motor: 160mm
Arm Thickness: 3.5mm
Frame Weight With TPU: 30g


Includes

1x Quadifier Mamba Racing 3&quot Micro Frame Kit - Choose Your Color
1x TPU Kit


Quadifier Mamba Racing 3" Micro Frame Kit - Choose Your Color from WREKD Co.

The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. 
Be sure to check out all our micro frames, and all our Quadifier products! 
Features

Designed for 20x20 stacks

Stretch X for more efficient flight

3.5mm unibody bottom plate
2mm top plate

Fits only nano 14x14 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 14mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 3.5mm
Frame Shape: Slight Stretched X
Motor to Motor: 160mm
Arm Thickness: 3.5mm
Frame Weight With TPU: 30g


Includes

1x Quadifier Mamba Racing 3" Micro Frame Kit 
1x TPU Kit


The Quadifier Mamba is a 3 inch race frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The cobra is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Check out all our Racing Frames and the rest of our Quadi

Quadifier Mamba 3

GEPRC

GEPRC Racer 5" Frame Kit

When you&#39re chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5&quot Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight controller attaches easily to 20x20mm/25.5x25.5mm/30.5x30.5mm mounting holes, and motors attach to the 16x16mm. 












When the conventional FPV drone cannot satisfy the pursuit of speed in FPV racing, then this is the frame for you!
Choose between having the aluminum plate colored with red or silver accents!












Be sure to check out all our 5&quot frames,  and our GEPRC products!










Specifications

Model: RACER FPV Frame

Frame: GEP-RACER Frame

Dimensions: 175mm×173mm

Wheelbase: 208mm

Top plate: 2.0mm

Aluminum plate: 2.0mm

Bottom plate: 2.0mm

Arm thickness: 5.0mm

Aluminum column size: M3x6x24mm

FC mounting hole: 30.5mmx30.5mm/25.5mmx25.5mm/20mmx20mm

VTX mounting hole: 20mmx20mm

Motor mounting hole: 16mmx16mm

Camera installation space: 14mm

Propeller: 5 inches

Weight: 78g ± 2g

Includes

1x Top plate
1x Bottom plate
1x Aluminum plate (Red or Titanium)
1x Camera mount
1x VTX antenna mount
1x Shark fin print
4x M3x6x24mm aluminum column
2x 20x250mm battery cable ties
2x Battery anti-skid pads
1x Screw pack
1x L-shaped screwdriver 1.5mm
1x L-shaped screwdriver 2mm


When you're chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5" Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight cont

GEPRC Racer 5" Frame Kit - Choose Your Color from WREKD Co.

GEPRC Racer 5

GEPRC Racer 5" Frame Kit - Choose Your Color

When you're chasing the ultimate speed in the FPV racing arena, the GepRC Racer 5" Racing Frame Kit is the perfect choice. This frame is specially designed for the competition.  Combining 7075-T6 aviation aluminum alloy splint with high-grade T700 carbon plate CNC processing, this frame is beyond solid. The flight controller attaches easily to 20x20mm/25.5x25.5mm/30.5x30.5mm mounting holes, and motors attach to the 16x16mm. 












When the conventional FPV drone cannot satisfy the pursuit of speed in FPV racing, then this is the frame for you!
Choose between having the aluminum plate colored with red or silver accents!












Be sure to check out all our 5" frames,  and our GEPRC products!










Specifications

Model: RACER FPV Frame

Frame: GEP-RACER Frame

Dimensions: 175mm×173mm

Wheelbase: 208mm

Top plate: 2.0mm

Aluminum plate: 2.0mm

Bottom plate: 2.0mm

Arm thickness: 5.0mm

Aluminum column size: M3x6x24mm

FC mounting hole: 30.5mmx30.5mm/25.5mmx25.5mm/20mmx20mm

VTX mounting hole: 20mmx20mm

Motor mounting hole: 16mmx16mm

Camera installation space: 14mm

Propeller: 5 inches

Weight: 78g ± 2g

Includes

1x Top plate
1x Bottom plate
1x Aluminum plate (Red or Titanium)
1x Camera mount
1x VTX antenna mount
1x Shark fin print
4x M3x6x24mm aluminum column
2x 20x250mm battery cable ties
2x Battery anti-skid pads
1x Screw pack
1x L-shaped screwdriver 1.5mm
1x L-shaped screwdriver 2mm


The GEPRC Racer frame combines the 7075-T6 aviation aluminum alloy splint and the high-grade T700 carbon plate CNC processing.

GEPRC Racer 5" FPV Frame Kit - Silver

GEPRC Racer 5&quot FPV Frame Kit - Silver

VROOM

VROOM Comet Pro 5" Racing Frame Kit

WREKD Co.


Introducing the VROOM Comet Pro, the epitome of speed and agility in the world of racing frames. Engineered for unmatched performance and designed with meticulous attention to detail, this frame is the key to unlocking your true racing potential.
With its 20mm x 20mm stack support, the VROOM Comet Pro offers seamless integration of your preferred flight controllers, ESCs, and other electronic components. Experience a clean and compact build, free from tangled wires and clutter. Your setup will be optimized for lightning-fast response and precise control, giving you the edge on the race track.
No more time wasted on complicated arm swaps. The VROOM Comet Pro features a quick-release one-screw arm swap system that allows you to get back in the race in seconds. Simply loosen the screw, swap out the arm, and secure it back in place. It's that easy. Spend less time on maintenance and more time pushing the limits of speed.
Crafted with the utmost precision, the T701 Carbon construction of the VROOM Comet Pro ensures unrivaled durability and strength. It effortlessly withstands the most demanding flights and daring maneuvers, giving you the confidence to push the boundaries of your skills. Say goodbye to worries about structural integrity and focus on unleashing your full racing potential.
The double-plated wiggle plate is a testament to the VROOM Comet Pro's commitment to stability and resilience. This feature not only provides enhanced protection but also ensures optimum rigidity during high-speed flights and aggressive cornering. Experience ultimate stability and minimize vibrations for a race experience like no other.
The 193mm wheelbase strikes the perfect balance between agility and stability. It allows for nimble maneuvers through tight corners while maintaining control and stability during high-speed straightaways. With the VROOM Comet Pro, you'll have the versatility to conquer any race track with confidence and finesse.
Weighing in at only 58 grams, the VROOM Comet Pro is a featherweight powerhouse. Shedding unnecessary weight without compromising strength, it offers lightning-fast acceleration, unmatched maneuverability, and unparalleled responsiveness. Prepare to leave your competitors in the dust as you effortlessly navigate the racecourse with precision and speed.
The VROOM Comet Pro package includes everything you need to get started on your path to racing victory. The T700 Carbon Frame serves as the sturdy foundation for your build, while the aluminum standoffs provide reliable and secure mounting. The comprehensive hardware kit ensures you have all the necessary screws and bolts for assembly. Additionally, the TPU kit offers added protection and customization options. And let's not forget the HQ Racing Props, designed to maximize thrust and propel you to new heights of performance.
Unleash your racing potential with the VROOM Comet Pro. This exceptional racing frame combines speed, agility, and durability to redefine what's possible on the race track. It's time to take your racing ambitions to the next level and experience the thrill of victory like never before. Get ready to dominate the competition with the VROOM Comet Pro by your side.
Features

20mm x 20mm stack support
Quick release one screw arm swap
Double Plated Wiggle Plate
T700 Carbon
Wheelbase 193mm
Weight 58g

Includes

1 x T700 Carbon Frame
1 x Aluminum Standoffs
1 x Hardware Kit
1 x TPU Kit
1 x HQ Racing Props

 

Introducing the VROOM Comet Pro, the epitome of speed and agility in the world of racing frames. Engineered for unmatched performance and designed with meticulous attention to detail, this frame is the key to unlocking your true racing potential. With its 20mm x 20mm stack support, the VROOM Comet Pro offers seamless i

VROOM Comet Pro 5" Racing Frame Kit - Choose Colors

WREKD


Introducing the VROOM Comet Pro, the epitome of speed and agility in the world of racing frames. Engineered for unmatched performance and designed with meticulous attention to detail, this frame is the key to unlocking your true racing potential.
With its 20mm x 20mm stack support, the VROOM Comet Pro offers seamless integration of your preferred flight controllers, ESCs, and other electronic components. Experience a clean and compact build, free from tangled wires and clutter. Your setup will be optimized for lightning-fast response and precise control, giving you the edge on the race track.
No more time wasted on complicated arm swaps. The VROOM Comet Pro features a quick-release one-screw arm swap system that allows you to get back in the race in seconds. Simply loosen the screw, swap out the arm, and secure it back in place. It&#39s that easy. Spend less time on maintenance and more time pushing the limits of speed.
Crafted with the utmost precision, the T701 Carbon construction of the VROOM Comet Pro ensures unrivaled durability and strength. It effortlessly withstands the most demanding flights and daring maneuvers, giving you the confidence to push the boundaries of your skills. Say goodbye to worries about structural integrity and focus on unleashing your full racing potential.
The double-plated wiggle plate is a testament to the VROOM Comet Pro&#39s commitment to stability and resilience. This feature not only provides enhanced protection but also ensures optimum rigidity during high-speed flights and aggressive cornering. Experience ultimate stability and minimize vibrations for a race experience like no other.
The 193mm wheelbase strikes the perfect balance between agility and stability. It allows for nimble maneuvers through tight corners while maintaining control and stability during high-speed straightaways. With the VROOM Comet Pro, you&#39ll have the versatility to conquer any race track with confidence and finesse.
Weighing in at only 58 grams, the VROOM Comet Pro is a featherweight powerhouse. Shedding unnecessary weight without compromising strength, it offers lightning-fast acceleration, unmatched maneuverability, and unparalleled responsiveness. Prepare to leave your competitors in the dust as you effortlessly navigate the racecourse with precision and speed.
The VROOM Comet Pro package includes everything you need to get started on your path to racing victory. The T700 Carbon Frame serves as the sturdy foundation for your build, while the aluminum standoffs provide reliable and secure mounting. The comprehensive hardware kit ensures you have all the necessary screws and bolts for assembly. Additionally, the TPU kit offers added protection and customization options. And let&#39s not forget the HQ Racing Props, designed to maximize thrust and propel you to new heights of performance.
Unleash your racing potential with the VROOM Comet Pro. This exceptional racing frame combines speed, agility, and durability to redefine what&#39s possible on the race track. It&#39s time to take your racing ambitions to the next level and experience the thrill of victory like never before. Get ready to dominate the competition with the VROOM Comet Pro by your side.
Features

20mm x 20mm stack support
Quick release one screw arm swap
Double Plated Wiggle Plate
T700 Carbon
Wheelbase 193mm
Weight 58g

Includes

1 x T700 Carbon Frame
1 x Aluminum Standoffs
1 x Hardware Kit
1 x TPU Kit
1 x HQ Racing Props

 

VROOM Comet Pro 5" Racing Frame Kit - Choose Colors from WREKD Co.

VROOM Comet Pro 5

SkyReadyRC

SkyReadyRC Reflex 5" Racing Frame


Designed, developed, and tested in Texas!
Based off the ultra-durable SLX Evo, the ultra light REFLEX frame is here. Presenting the REFLEX 5" Racing Frame by Sky Ready RC.
10 GRAMS LIGHTER: The REFLEX takes the innovative CLS (channel lock system) from the SLX Evo, and makes it better. 10 grams have been removed from the previous version, while retaining the same durability. The arms are still anchored by the CLS plate in 3 different positions, and a new screw tension system completely eliminates "arm wiggle", even after continuous crashing.
EASY MAINTENANCE: Arm changes can be done in a snap! The innovative CLS plate design on the REFLEX also allows for easy maintenance in the event of a broken arm (broken arms are few and far between). To change an arm, simply remove the screw anchoring the arm to the CLS plate, remove the three motor screws, and slide the arm out.
ULTIMATE QUALITY: Every carbon fiber part on the REFLEX is T700 grade and features a silky smooth coating, resulting in extreme rigidity and the best quality you can get.
ASSEMBLY INSTRUCTIONS: https://www.skyreadyrc.com/store/manuals/reflex-assembly-instructions.pdf
Features


62 grams (including steel hardware)

T700 silky smooth carbon fiber chamfered arms (5mm thick)

T700 silky smooth carbon fiber bottom plate (2mm thick)
T700 silky smooth carbon fiber mid plate (2mm thick)

T700 silky smooth carbon fiber top plate (2mm thick)

Beautifully printed TPU parts (fin, 2 types of vtx antenna mounts, camera mount, capacitor mount)

12.9 grade gunmetal steel screws

16x16 motor mounting
200mm wheelbase
Accommodates 20x20 stacks ONLY
Accommodates NANO cameras (14x14) ONLY

Includes

4 x 5mm T700 carbon fiber chamfered arms

1 x 2mm T700 carbon fiber bottom plate
1 x 2mm T700 carbon fiber mid plate

1 x 2mm T700 carbon fiber top plate
2 x 3mm T700 carbon fiber CLS plates

1 x TPU kit (cam, antenna, cap mount)

4 x aluminum black textured 25mm standoffs
4 x 3x10mm 12.9 grade gunmetal steel screws

4 x 3x16mm 12.9 grade countersunk gunmetal steel screws
2 x 3x8mm 12.9 grade countersunk gunmetal steel screws

Reflex Review by Jon E5 FPV Drones

Sky Ready RC Frame Review by Joshua Bardwell

 
Cobra SLX EVO Review by Jon E5 FPV Drones
 

 
Cobra SLX EVO Build Video
 

 
Unbreakable Racer??? Cobra 5" FPV Frame
 


Designed, developed, and tested in Texas! Based off the ultra-durable SLX Evo, the ultra light REFLEX frame is here. Presenting the REFLEX 5" Racing Frame by Sky Ready RC. 10 GRAMS LIGHTER: The REFLEX takes the innovative CLS (channel lock system) from the SLX Evo, and makes it better. 10 grams have been removed from t

SkyReadyRC Reflex 5" Racing Frame - Choose Color


Designed, developed, and tested in Texas!
Based off the ultra-durable SLX Evo, the ultra light REFLEX frame is here. Presenting the REFLEX 5&quot Racing Frame by Sky Ready RC.
10 GRAMS LIGHTER: The REFLEX takes the innovative CLS (channel lock system) from the SLX Evo, and makes it better. 10 grams have been removed from the previous version, while retaining the same durability. The arms are still anchored by the CLS plate in 3 different positions, and a new screw tension system completely eliminates &quotarm wiggle&quot, even after continuous crashing.
EASY MAINTENANCE: Arm changes can be done in a snap! The innovative CLS plate design on the REFLEX also allows for easy maintenance in the event of a broken arm (broken arms are few and far between). To change an arm, simply remove the screw anchoring the arm to the CLS plate, remove the three motor screws, and slide the arm out.
ULTIMATE QUALITY: Every carbon fiber part on the REFLEX is T700 grade and features a silky smooth coating, resulting in extreme rigidity and the best quality you can get.
ASSEMBLY INSTRUCTIONS: https://www.skyreadyrc.com/store/manuals/reflex-assembly-instructions.pdf
Features


62 grams (including steel hardware)

T700 silky smooth carbon fiber chamfered arms (5mm thick)

T700 silky smooth carbon fiber bottom plate (2mm thick)
T700 silky smooth carbon fiber mid plate (2mm thick)

T700 silky smooth carbon fiber top plate (2mm thick)

Beautifully printed TPU parts (fin, 2 types of vtx antenna mounts, camera mount, capacitor mount)

12.9 grade gunmetal steel screws

16x16 motor mounting
200mm wheelbase
Accommodates 20x20 stacks ONLY
Accommodates NANO cameras (14x14) ONLY

Includes

4 x 5mm T700 carbon fiber chamfered arms

1 x 2mm T700 carbon fiber bottom plate
1 x 2mm T700 carbon fiber mid plate

1 x 2mm T700 carbon fiber top plate
2 x 3mm T700 carbon fiber CLS plates

1 x TPU kit (cam, antenna, cap mount)

4 x aluminum black textured 25mm standoffs
4 x 3x10mm 12.9 grade gunmetal steel screws

4 x 3x16mm 12.9 grade countersunk gunmetal steel screws
2 x 3x8mm 12.9 grade countersunk gunmetal steel screws

Reflex Review by Jon E5 FPV Drones

Sky Ready RC Frame Review by Joshua Bardwell

 
Cobra SLX EVO Review by Jon E5 FPV Drones
 

 
Cobra SLX EVO Build Video
 

 
Unbreakable Racer??? Cobra 5&quot FPV Frame
 


SkyReadyRC Reflex 5" Racing Frame - Choose Color from WREKD Co.

SkyReadyRC Reflex 5

VROOM Comet 5" Racing Frame


The VROOM Comet 5&quot Racing Frame which it&#39s Pro model shares a name. This frame is solid, and has 30x30 stack support in addition to 20x20 stack support.
A frame and brand carried exclusively at WREKD Co.
We think this new frame will be extremely competitive drone racing frame.
Features


30mm x 30mm stack support
20mm x 20mm stack support
T700 Carbon

Wheelbase 193mm
Weight 58g



Experience exhilarating speed and precision with the VROOM Comet Racing Frame. Unleash your FPV drone's potential with 30x30 and 20x20 stack support.

VROOM Comet 5" T700 Carbon Racing Frame from WREKD Co.

VROOM Comet 5

VROOM Comet 5" T700 Carbon Racing Frame


The VROOM Comet 5" Racing Frame which it's Pro model shares a name. This frame is solid, and has 30x30 stack support in addition to 20x20 stack support.
A frame and brand carried exclusively at WREKD Co.
We think this new frame will be extremely competitive drone racing frame.
Features


30mm x 30mm stack support
20mm x 20mm stack support
T700 Carbon

Wheelbase 193mm
Weight 58g



The VROOM Comet 5" Racing Frame which it's Pro model shares a name. This frame is solid, and has 30x30 stack support in addition to 20x20 stack support. A frame and brand carried exclusively at WREKD Co. We think this new frame will be extremely competitive drone racing frame. Features 30mm x 30mm stack support 20mm x 

TBS Source PodRacer 5" Racing Frame

The SOURCE PODRACER is a ultralight racing frame, made for speed addicts and grassroots fpv racers. It is designed to maximize speed and minimize drag. It fits and protects all the current toothpick-style FPV components and is optimized for light weight. The SOURCE PODRACER is your perfect race winner, and is recommended for pro racing pilots only.
ABOUT THE PROJECT
The SOURCE PODRACER project is a collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame in order to compete in an increasingly predatory marketplace.
The hope is for this frame to enable broad access to FPV thanks to a low price point, great documentation, and wide availability of compatible parts and accessories, without violating other people's intellectual property.
GET INVOLVED!

Project discussion: Coming Soon
Project files: Coming Soon
3D Printed files on Thingiverse: Coming Soon
3D Printed Parts (STL) Coming Soon

PACKAGE CONTAINS:

1 x Carbon Frame Set
1 x Printed Pod
1 x Screw Set

TECHNICAL SPECIFICATIONS:


Wheelbase: 200mm

Stacking Mounting Plate:  1.5mm

Bottom Plate: 1.5mm

Arms: 5mm thick

Stack Mout:  19 x19mm, 26x26mm, 20x20mm

Motor Mount: 12 x 12mm &amp 9 x 9mm

Frame weight: 47g

HARDWARE:

8 x M2x10mm Countersunk screws
4 x M2x12mm Countersunk screws
2 x M2x6mm Socket head screws
24 x M2x10mm Socket screws
1 x 1.5mm Carbon Fiber Top Plate
1 x 1.5mm Carbon Fiber Bottom Plate
2 x 5mm Carbon Fiber Arms
Black Nylon 3D printed canopy

RECOMMENDED PARTS:
The part recommendations are put together by our engineers and pilots. We strive for reliability and high quality in all of our selections, which may cost a bit extra but allow you to enjoy the frame much more!


AIO: BetaFPV Toothpick F4 2-4S AIO Brushless Flight Controller 20A(BLHeli_S)


Motors: 1505 - 3600kv


Camera: 14*14 Nano camera


VTx: TBS Unify Pro32 Nano or TBS Unify Pro Nano


Antenna: TBS Triumph Pro (U.FL)  *Strongly recommended, the pod is designed for this antenna.

Props:  5" - HQ Durable Prop T5

Battery: 450 - 600mAh, 3-4S


The SOURCE PODRACER is a ultralight racing frame, made for speed addicts and grassroots fpv racers. It is designed to maximize speed and minimize drag. It fits and protects all the current toothpick-style FPV components and is optimized for light weight. The SOURCE PODRACER is your perfect race winner, and is recommend

TBS Source Podracer 5" Ultralite Racing Frame

Team BlackSheep

The SOURCE PODRACER is an ultralight racing frame, made for speed addicts and grassroots fpv racers

TBS Source PodRacer 5&quot Racing Frame

The SOURCE PODRACER is a ultralight racing frame, made for speed addicts and grassroots fpv racers. It is designed to maximize speed and minimize drag. It fits and protects all the current toothpick-style FPV components and is optimized for light weight. The SOURCE PODRACER is your perfect race winner, and is recommended for pro racing pilots only.
ABOUT THE PROJECT
The SOURCE PODRACER project is a collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame in order to compete in an increasingly predatory marketplace.
The hope is for this frame to enable broad access to FPV thanks to a low price point, great documentation, and wide availability of compatible parts and accessories, without violating other people&#39s intellectual property.
GET INVOLVED!

Project discussion: Coming Soon
Project files: Coming Soon
3D Printed files on Thingiverse: Coming Soon
3D Printed Parts (STL) Coming Soon

PACKAGE CONTAINS:

1 x Carbon Frame Set
1 x Printed Pod
1 x Screw Set

TECHNICAL SPECIFICATIONS:


Wheelbase: 200mm

Stacking Mounting Plate:  1.5mm

Bottom Plate: 1.5mm

Arms: 5mm thick

Stack Mout:  19 x19mm, 26x26mm, 20x20mm

Motor Mount: 12 x 12mm &ampamp 9 x 9mm

Frame weight: 47g

HARDWARE:

8 x M2x10mm Countersunk screws
4 x M2x12mm Countersunk screws
2 x M2x6mm Socket head screws
24 x M2x10mm Socket screws
1 x 1.5mm Carbon Fiber Top Plate
1 x 1.5mm Carbon Fiber Bottom Plate
2 x 5mm Carbon Fiber Arms
Black Nylon 3D printed canopy

RECOMMENDED PARTS:
The part recommendations are put together by our engineers and pilots. We strive for reliability and high quality in all of our selections, which may cost a bit extra but allow you to enjoy the frame much more!


AIO: BetaFPV Toothpick F4 2-4S AIO Brushless Flight Controller 20A(BLHeli_S)


Motors: 1505 - 3600kv


Camera: 14*14 Nano camera


VTx: TBS Unify Pro32 Nano or TBS Unify Pro Nano


Antenna: TBS Triumph Pro (U.FL)  *Strongly recommended, the pod is designed for this antenna.

Props:  5&quot - HQ Durable Prop T5

Battery: 450 - 600mAh, 3-4S


TBS Source Podracer: The ultimate ultralight racing frame for speed addicts & grassroots fpv racers. Maximize speed & minimize drag. Race to win!

TBS Source Podracer 5" Ultralite Racing Frame from WREKD Co.

TBS Source Podracer 5

Hyperlite

Hyperlite Floss 3.0 LITE Race 5" Frame

PyroDrone

The Floss 3.0 our most selling race frame ever went on diet!This is the LITE version of the Floss 3.0 which is pretty much identical to it's bigger versionother than all the parts are shrunk down saving around 10 GRAMS! The Floss 3.0 LITE is designed FOR racers BY racers as the next evolution of the most popular racing frame.Based around a high quality, anodized 7075 aluminum core, the frame features sandwich plates and individual,interlocking, easy to change arms to prevent arm wiggle along with a host of other modern features (and goodies!).Due to the tight space of the frame the included camera mounts need to be flipped outto give you enough room between the camera connector and the stack.

59.5g WITH hardware
Soft edge 5mm carbon arms to achieve goals of chamfering without loss of streghth
Machined channels in the aluminum plate prevent arm wiggle
Arms can be easily removed with only 2 screws
Countersunk bottom plate screws
Allows for 20x20 ONLY
Up to 85+ degrees of tilt

Also includes:

1 x Spare arm
3M anti slip battery pad
TPU micro FPV camera mount
TPU SMA mount


The Floss 3.0 our most selling race frame ever went on diet!This is the LITE version of the Floss 3.0 which is pretty much identical to it's bigger versionother than all the parts are shrunk down saving around 10 GRAMS! The Floss 3.0 LITE is designed FOR racers BY racers as the next evolution of the most popular racing

Hyperlite Floss 3.0 Lite Race 5" Frame

Hyperlite Floss 3.0 LITE Race Frame 

The Hyperlite Floss 3.0 went on diet! It's very identical to the&nbspHYPERLITE FLOSS 3.0 Race Frame (5 Inch)&nbspversion, other than the parts being shrik by 10g!

The Hyperlite Floss 3.0 went on diet! It's very identical to the HYPERLITE FLOSS 3.0 Race Frame (5 Inch) version, other than the parts being shrik by 10g!

Hyperlite Floss 3.0 LITE Race Frame - 5"

Hyperlite Floss 3.0 LITE Race Frame - 5&quot

Hyperlite F3LX True-X Racing 5" Frame

Hyperlite F3LX True-X Racing 5

The Hyperlite Floss 3.0 one of the most races winning frame went on diet with the release of the Floss 3.0 Lite.Pilots loved the Floss 3.0 Lite frame but due to high demand of a True-X version from racers we are happy to introduce the Hyperlite 

F3LXFEATURES:


5mm Stubbier more durable arms compared to previous version
Soft edge 5mm carbon arms to achieve goals of chamfering without loss of strenght
7075 Grade anodized aluminum core
Machined channels in the aluminum plate to prevent arm wiggle
Threaded stack screw holes (no need for nuts on the top side to prevent unnecessary  hight between plate and ESC)
59 Grams incluing hardware
Protective variable angle TPU FPV camera mount (30~60 degrees)
Compatible with Nano FPV cameras ONLY
Compatible with 20*20mm stacks ONLY
Arms can be easily removed with only 2 screws
Countersunk bottom plate screws (recessed below battery pad and flat with the carbon plate)


KIT CONTENTS:


5 x Carbon Fiber 5mm F3LX 5" arms
1 x 2mm Carbon Fiber Bottom Plate
1 x 7075 Anodized Aluminum Main Plate
1 x 2mm Carbon Fiber Top Plate
1 x Hardware Pack
1 x TPU Printed FPV Camera Mount
1 x TPU Printed Flipstick Mount with Carbon Rod &amp Plastic Cap
1 x Hyperlite Battery Strap 


The Hyperlite Floss 3.0 one of the most races winning frame went on diet with the release of the Floss 3.0 Lite.Pilots loved the Floss 3.0 Lite frame but due to high demand of a True-X version from racers we are happy to introduce the Hyperlite F3LXFEATURES: 5mm Stubbier more durable arms compared to previous version S

Pilots loved the Floss 3.0 Lite frame but due to the high demand of a True-X version from racers, we are happy to introduce the Hyperlite F3LX!

Hyperlite F3LX True-X Racing 5&quot Frame

Camera Size

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 

FPV Cameras

Hyperlite Floss 3.0 Race 5" Frame

Hyperlite Floss 3.0 Race Frame 5

Pyro-Drone

The Hyperlite Floss 3.0 quadcopter frame is designed FOR racers BY racers as the next evolution of one of the most popular racing frames. 

HYPERLITE FLOSS 3.0 Race Frame (5 Inch)

iFlight

iFlight AOS 5R 5" Frame Kit

IFLIGHT

Redefining state of the art in FPV drone racing. The AOS 5R V5 is designed with cutting-edge patent pending technology to give you an edge over the competition.
Be sure to browse the rest of our iFlight products and DJI compatible frames, electronics and accessories.
Features

Supports up to 5.3" Props
AOS X-Cell Anti-Vibration Technology
20x20 mm M3 flight stack
25.5x25.5 mm OR 20x20 mm M2 top plate mounting
20mm standoff spacing fits most existing 3D prints for 14mm camera, shark fin, and VTX antenna
50mm stack clearance front to rear fits even the largest 20x20 M3 ESCs
⌀16mm motor mounting (supports all standard 5" motors)


Specifications

Product Name: AOS 5R Frame Kit
Frame wheelbase: 201mm
Frame Dimension: L142xW142xH38 mm
Arm Thickness: 6mm
Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Upper Plate Thickness: 2mm
Max Flight Stack Height: 25mm
Max VTX Height: 25mm
Motor Mounting: 16x16-φ3mm
Flight Stack Mounting: 20x20 Φ3mm
VTX Mounting: 20x20/Φ2mm 25.5x25.5/Φ2mm
Weight: 90g
Compatible: Vista HD system/ BLITZ mini 1.6W VTX

Includes

1x iFlight AOS 5R 5" Frame Kit


Redefining state of the art in FPV drone racing. The AOS 5R V5 is designed with cutting-edge patent pending technology to give you an edge over the competition. Be sure to browse the rest of our iFlight products and DJI compatible frames, electronics and accessories. Features Supports up to 5.3" Props AOS X-Cell Anti-V

Five33 LightSwitch V2 5" Racing Frame Kit












By working closely with elite pilots from across the planet, Five33 took on the challenge of improving the LightSwitch design based on their invaluable feedback. They specified a need for enhanced toughness, easier assembly, and greater stiffness. With their expertise and 100% dedication, Five33 has completed what is now seen as the most remarkable frame on the market, for a variety of pilots.  This design will allow you to practice hard and compete at the highest level.











Check out all our 5" frames and all our FIVE33 Flying Gear!
Features

Longitudinal Vertical carbon stiffeners: Delivers the cleanest blackbox logs within its class
6mm T700 Arms: Provides enhanced durability for long-lasting performance
4 arms per arm kit



Specifications

Motor Bolt Mounting: 16x16 
Top &amp Bottom Plate thickness: 2mm
Middle Plate thickness: 2mm
Arm thickness: 6mm
Stack Mounting: 20x20mm

Includes

1x FIVE33 LightSwitch V2 5" Racing Frame Kit - Lite T700 Arms



By working closely with elite pilots from across the planet, Five33 took on the challenge of improving the LightSwitch design based on their invaluable feedback. They specified a need for enhanced toughness, easier assembly, and greater stiffness. With their expertise and 100% dedication, Five33 has completed what is n

FIVE33 LightSwitch V2 5" Racing Frame Kit w/T700 Arms - Lite (w/out TPU)

FIVE33 LightSwitch V2 5" Racing Frame Kit w/T700 Arms - Lite (w/out TP

We worked with the world's best pilots to improve the LightSwitch design and their main requests were to increase durability, simplify the build, and make it stiffer. With the help of our team we were able to develop what we believe is the best frame for the masses. This design will allow you to practice hard and compete at the highest level.
Some of the upgrades to the LightSwitch V2:


Longitudinal Vertical carbon stiffeners = The cleanest blackbox logs in its class




6mm T700 Arms = Increased durability



We worked with the world's best pilots to improve the LightSwitch design and their main requests were to increase durability, simplify the build, and make it stiffer. With the help of our team we were able to develop what we believe is the best frame for the masses. This design will allow you to practice hard and compe

Five33 Lightswitch V2 Frame Kit

Five33 Switchback HD Frame Kit










This FIVE33 Switchback HD 5" Racing Frame Kit offers an ultra-durable experience yet while keeping the frame lightweight for that racing performance. Get ready to take your racing to the next level by building your dream drone with top-notch performance. This frame has 20×20, 30×30, and 25.5×25.5 mounting options.  The Switchback HD was designed to be compatible with all existing HD systems and allow for maximum flexibility in the build space. With this frame kit, your race experience will never be the same. 









Note: To fit a vista you will need a 20×20 stack mounted in the forward offset stack location or taller standoffs. To fit an air unit, you will need a 30×30 AIO ESC/FC.
Note: Choose your arms type and if you want prints with your frame kit. 
Thingiverse Listing: https://www.thingiverse.com/thing:4933552
We carry other Five33 5" Frames to look to look at. 
Check out all our DJI-compatible frames, electronics, and accessories and all our FIVE33 Flying Gear!
Features

Arms for this frame are interchangeable 
The Switchback HD was designed to be compatible with all existing HD systems and allow for maximum flexibility in the build space.
Lite arms = 33g SFG arms = 35g
SFG: The SFG arms are compatible with all Switchback V1 braces, SFGs, &amp BFGs
Lite(SPLT): Smallest possible arm length that can fit 5.1″ props


Specifications

Weight: 90.1g (Prints Included)
Dimensions: 6 x 12.70 x 0.25 cm 

Arm Option: SFG Arms or SPLT
TPU Color: Championship Teal (Optional)
Motor Bolt Mounting: 16x16 &amp 19x19
Stack Mounting: 20x20, 30x30, and 25.5x25.

Arms Thickness: 5mm
Top Plate: 2mm
Bottom Plate: 2mm
Lock Plate: 3mm
Mid Plate: 2mm

Includes

1x FIVE33 Switchback HD 5" Racing Frame Kit - Choose Your Version


This FIVE33 Switchback HD 5" Racing Frame Kit offers an ultra-durable experience yet while keeping the frame lightweight for that racing performance. Get ready to take your racing to the next level by building your dream drone with top-notch performance. This frame has 20×20, 30×30, and 25.5×25.5 mounting options.  The

FIVE33 Switchback HD 5" Racing Frame Kit - Choose Your Version

This is our first HD specific frame design. The Switchback HD was designed to be compatible with all existing HD systems and allow for maximum flexibility in the build space. Has 20×20, 30×30, and 25.5×25.5 mounting options. Works with all Switchback PRO arms. Note: To fit a vista you will need a 20×20 stack mounted in

Five33 Switchback HD 5

Quad Frame Size

Pre-Built Quads and Kits

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Motor Stator Size

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 