FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

TBS Tango 2 - Module Bay Add-on

Team Black Sheep

After-market mod to add a module bay to your Tango 2. Sticks to the back of your Tango 2 and plugs into the receptacle board of your Tango 2.

Get the TBS Tango 2 - Module Bay Add-on shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

TBS Tango 2 - Module Bay Add-on - RMRC

Team BlackSheep


*IMPORTANT NOTE
We have discovered that XJT mini modules are using a pin that we did not anticipate for use in our module bay. It appears that the XJT mini module is the only module on the market that uses this pin. 
Due to a hardware incompatibility between the XJT mini module and the Tango 2 (V2 and up) boards, the Tango 2 will NOT be able to support the XJT mini module. 
After-market mod to add a module bay to your Tango 2. Sticks to the back of your Tango 2 and plugs into the receptacle board of your Tango 2.
INSTALLATION

Install the FPC cable to the PCB.With the blue side facing up, lift the lock and slide the cable in then lock it down. 
Feed the cable through the bottom and place the PCB to the module bay.  
Turn the module bay around to make sure everything fits accordingly. 
Close the case with the 2 screws provided
Use a dremel, knife or solder tip to cut a small hole accoridng to the outline. 
Slide the flex PCB through the drilled case. 
Clean the back surface and tape the Tango 2 module bay down 
 Install the FPC cable into the receptacle. 
Close the Tango2 case, and you're done!

Warning: The batch 1 of Tango 2 shipped without module bay capability. Please verify that there is a connector (in pictures above) before purchasing this add-on. Upgrade PCB's are available!
Also, whenever opening up your Tango 2 in future, you will need to open the module bay and release the flex PCB from the socket.
SPECIFICATIONS:

"LITE" style module bay add-on for Tango 2
Compatiible with TBS Tango 2 mainboard "V006H" and up


*IMPORTANT NOTE We have discovered that XJT mini modules are using a pin that we did not anticipate for use in our module bay. It appears that the XJT mini module is the only module on the market that uses this pin.  Due to a hardware incompatibility between the XJT mini module and the Tango 2 (V2 and up) boards, the T

TBS Tango 2 - Module Bay add-on

After-market mod to add a module bay to your Tango 2. Sticks to the back of your Tango 2 and plugs into the receptacle board of your Tango 2.



After-market mod to add a module bay to your Tango 2. Sticks to the back of your Tango 2 and plugs into the receptacle board of your Tango 2.
Installation

Open your Tango 2 and remove the back shell
Find the location for the cutout on the Tango 

RadioMaster

RadioMaster CNC AG01 Hall Gimbal Set for TX16S

HOBBYPORTER

We previously only offered the standard version of black AG01 gimbals. Now it's time to show your true colors with the AG01 color gimbals! Built to the same cutting-edge precision as the black AG01s, the color AG01s will look fly while you're on the fly!
Check out our RadioMaster collection and all our RC transmitters!

Features

Sicky360 gimbal stick ends - 360° Non-slip geometry with dual-ring design increases comfort and contact.
Made with CNC-processed aviation-grade aluminum.
Non-contact hall sensors, for accurate control inputs and precise centering.
Quad precision bearings, for unparalleled stick-feel.
Improved package, to better protect the AG01 Gimbals.

Specifications

Adjustable travel range: 38°- 54°

Temperature range: -20°c-85°c
Linearity: Real-time (No delay)
Working voltage: DC 3.3V
Adjustable tension: Yes
Adjustable mode: Yes
Product model: AG01
Size: 60*53*56mm
Quad bearing: Yes
Sensing type: Hall
Weight: 82g

Includes

RadioMaster TX16S CNC AG01 Hall Gimbal Set - Choose Color



We previously only offered the standard version of black AG01 gimbals. Now it's time to show your true colors with the AG01 color gimbals! Built to the same cutting-edge precision as the black AG01s, the color AG01s will look fly while you're on the fly! Check out our RadioMaster collection and all our RC transmitters!

RadioMaster TX16S CNC AG01 Hall Gimbal Set - Choose Color

RADIOMASTER

We previously only offered the standard version of black AG01 gimbals. Now it&#39s time to show your true colors with the AG01 color gimbals! Built to the same cutting-edge precision as the black AG01s, the color AG01s will look fly while you&#39re on the fly!
Check out our RadioMaster collection and all our RC transmitters!

Features

Sicky360 gimbal stick ends - 360° Non-slip geometry with dual-ring design increases comfort and contact.
Made with CNC-processed aviation-grade aluminum.
Non-contact hall sensors, for accurate control inputs and precise centering.
Quad precision bearings, for unparalleled stick-feel.
Improved package, to better protect the AG01 Gimbals.

Specifications

Adjustable travel range: 38°- 54°

Temperature range: -20°c-85°c
Linearity: Real-time (No delay)
Working voltage: DC 3.3V
Adjustable tension: Yes
Adjustable mode: Yes
Product model: AG01
Size: 60*53*56mm
Quad bearing: Yes
Sensing type: Hall
Weight: 82g

Includes

RadioMaster TX16S CNC AG01 Hall Gimbal Set - Choose Color



RadioMaster TX16S CNC AG01 Hall Gimbal Set - Choose Color from WREKD Co.

Throttle Gimbal &amp Centering Gimbal: Comes as set, 1 of each.This Radiomaster AG01 Full CNC Hall Gimbal Set was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to the next level.
The AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campbell, Noical, Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world’s most competitive racing events.
Check out our RadioMaster collection and all our RC transmitters!

Features

Designed specifically for the RadioMaster TX16S Radio
Mode Switching Throttle Tension Adjustment
CNC Aviation-Grade Aluminum
Spring Tension Adjustment
Non-Contact Hall Sensors
Quad Precision Bearings
Stick Travel Adjustment
Ergonomic Stick Ends
Adjustable Exterior

 

Specifications

Adjustable travel range: 38°- 54°

Temperature range: -20°c-85°c
Linearity: Real-time (No delay)
Working voltage: DC 3.3V
Adjustable tension: Yes
Adjustable mode: Yes
Product model: AG01
Size: 60*53*56mm
Quad bearing: Yes
Sensing type: Hall
Weight: 82g

Includes

Radiomaster TX16S CNC AGO1 Hall Gimbal  (Set of Both) 


1x Throttle
1x Self-Centering



Throttle Gimbal &amp; Centering Gimbal: Comes as set, 1 of each.This Radiomaster AG01 Full CNC Hall Gimbal Set was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for 

RadioMaster TX16S CNC AG01 Hall Gimbal - Set of Both Gimbals

According to the feedback from some players, we specially design the AG01 Hall Gimbal HOLLOWSHAFT set. These gimbals have a hollow shaft to allow wiring for aftermarket 4mm gimbal stick ends with buttons and switches etc. These are for special use cases only. Unless this is required, normal AG01 CNC Hall Gimbals should

RadioMaster TX16S CNC AG01 Hall Gimbal (Set of 2) - Hollow Shaft Version

RadioMaster Mini CNC AG01 Hall Gimbal Set for Zorro & TX12


For the long-awaited AG01 Mini is finally here! Custom designed for the RadioMaster Zorro and TX12, these gimbals allow for unparalleled precision and stick feel.


From the aviation-grade aluminum construction, non-contact hall sensors, and pre-installed Sticky360 Mini Gimbal Sticks, be prepared to revolutionize your compact radio experience!
Features


Made with CNC-processed aviation-grade aluminum.
Contact Free hall sensors for accurate control inputs and precise centering.
Quad precision bearings for unparalleled stick feel.
Adjustable vertical travel angle (Min. 38°, Max. 54°).
Custom designed for the RadioMaster Zorro.

Specifications

Name: AG01 Mini CNC Hall Gimbal 
Sensor type: Hall Sensor
Working voltage: DC 3.3V
Linearity: Real-time (No delay)
Adjustable vertical travel range: 38°—54°
Self-centering adjustment: Yes 
Easy mode adjustment
Adjustable tension: Yes
Quad bearing: Yes
Temperature range: -20°C-85°C
Size: 49*42*48mm
Weight: 42g(±0.3g)

Includes

2 * AG01 Mini Hall CNC Gimbal
2 * Hex tool
8 * Installation screw
2 * Spare normal tension spring
2 * Throttle tension screw 




For the long-awaited AG01 Mini is finally here! Custom designed for the RadioMaster Zorro and TX12, these gimbals allow for unparalleled precision and stick feel. From the aviation-grade aluminum construction, non-contact hall sensors, and pre-installed Sticky360 Mini Gimbal Sticks, be prepared to revolutionize your compact radio experience!

AG01 Mini CNC Hall Gimbal Set

RadioMaster Mini CNC AG01 Hall Gimbal Set for Zorro &amp; TX12 was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The Mini AG01 will take your T

RadioMaster Mini CNC AG01 Hall Gimbal Set for Zorro & TX12 - Choose Color

RadioMaster Mini CNC AG01 Hall Gimbal Set for Zorro &ampamp TX12 was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The Mini AG01 will take your TX12 or Zorro to the next level.

Check out our RadioMaster collection and all our RC transmitters!

Features

Designed specifically for the RadioMaster TX16S Radio
CNC Aviation-Grade Aluminum
Non-Contact Hall Sensors
Quad Precision Bearings
Stick Travel Adjustment
Sticky360 Stick Ends

Specifications

Input Voltage: DC 3.3V
Adjustable travel range: 38°- 54°

Temperature range: -20°c-85°c
Linearity: Real-time (No delay)
Adjustable Tension: Yes
Quad Bearing: Yes
Sensor Type: Hall
Dimensions: 49x42x48mm
Weight: 42g

Includes


2x RadioMaster Mini CNC AG01 Hall Gimbal Set for Zorro &ampamp TX12
2x Hex tool
8x Installation screw
2x Spare normal tension spring
2x Throttle tension screw 



RadioMaster Mini CNC AG01 Hall Gimbal Set for Zorro & TX12 from WREKD Co.

RadioMaster TX16S MKII Leather Side Grip

Add a touch of class to your RadioMaster TX16S MKII with these genuine leather side grips. These grips are comfortable and look great!

#html-body [data-pb-style=HLFRDAH]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=BCHB5XY]{display:no

RadioMaster TX16S MKII Leather Side Grip (2Pcs)

Upgrade your TX16S MKII with these super comfortable and high quality leather side grips! Available in either black, brown of cowboy finish. Check out our RadioMaster TX16S Collection and the rest of our TX16S Replacement Parts! Package Includes: 1 x RadioMaster TX16S MKII Transmitter Leather Side Grips - Chosen Color

RadioMaster TX16S MKII Transmitter Leather Side Grips

RadioMaster TX16S CNC AG01 Hall Gimbal

This Radiomaster AG01 Full CNC Hall Gimbal (Self-Centering) was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel.

This Radiomaster AG01 Full CNC Hall Gimbal (Self-Centering) was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension an

RadioMaster TX16S CNC AG01 Hall Gimbal - Self Centering

This Radiomaster AG01 Full CNC Hall Gimbal (Throttle) was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. 

This Radiomaster AG01 Full CNC Hall Gimbal (Throttle) was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and trav

RadioMaster TX16S CNC AG01 Hall Gimbal - Throttle

Choose Throttle Gimbal, Centering Gimbal or a set of both.This Radiomaster AG01 Full CNC Hall Gimbal Set was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to the next level.
The AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campbell, Noical, Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world’s most competitive racing events.
Check out our RadioMaster collection and all our RC transmitters!

Features

Designed specifically for the RadioMaster TX16S Radio
Mode Switching Throttle Tension Adjustment
CNC Aviation-Grade Aluminum
Spring Tension Adjustment
Non-Contact Hall Sensors
Quad Precision Bearings
Stick Travel Adjustment
Ergonomic Stick Ends
Adjustable Exterior

 

Specifications

Adjustable travel range: 38°- 54°

Temperature range: -20°c-85°c
Linearity: Real-time (No delay)
Working voltage: DC 3.3V
Adjustable tension: Yes
Adjustable mode: Yes
Product model: AG01
Size: 60*53*56mm
Quad bearing: Yes
Sensing type: Hall
Weight: 82g

Includes

Radiomaster TX16S CNC Hall Gimbal (Choose Throttle, Centering or Set of Both)



Choose Throttle Gimbal, Centering Gimbal or a set of both.This Radiomaster AG01 Full CNC Hall Gimbal Set was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy f

RadioMaster TX16S CNC AG01 Hall Gimbal - Choose Version or Set

This Radiomaster AG01 Full CNC Hall Gimbal Set was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to the next leve

RadioMaster TX16S CNC AG01 Hall Gimbal (Set of 2)

We previously only offered the standard version of black AGO1 gimbals. Now it's time to show your true colors with the AG01 color gimbals! Built to the same cutting-edge precision as the black AG01s, the color AG01s will look fly while you're on the fly! The color options are Purple, Gold, Blue, Red, and Green. All col

RadioMaster TX16S CNC AG01 Hall Gimbal (Set of 2) - Choose Color

Pyrodrone Edition RadioMaster TX16S CNC AG01 Hall Gimbal (Set of 2)

The best just got better. Until now, the best upgrade for your controllers when hall gimbals, now that's over. There's nothing better than Rotor Riot hall gimbals! All of the upgraded features you love, and getting to look cooler than everyone else.
Features

Made with CNC processed aviation grade aluminum
Ergonomic stick ends
Non-contact hall sensors, for accurate control inputs and precise centering
Quad precision bearings, for unparalleled stick feel

Specification


Item: AG01 CNC Hall Gimbal Sets
Sensing type: Hall

Working voltage: DC 3.3V
Linearity: Real-time (No delay)
Adjustable travel range: 38°—54°
Adjustable mode: Yes
Adjustable tension: Yes
Quad bearing: Yes
Temperature range: -20°c-85°c
Size: 60*53*56mm
Weight: 125g/pc

Includes

1 * AG01 CNC Hall Gimbal (Throttle)

1 * AG01 CNC Hall Gimbal (Centering)

2 * TX16S Softer Tension Spring Set

2 * Hexagon socket screwdriver

1 * Manual



Designed and tested for over a year, the AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campell, Noical, and Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world’s most competitive racing events. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16S to the next level.

Rotor Riot Edition AG01 CNC Hall Gimbal Set

This Radiomaster AG01 Full CNC Hall Gimbal (Self-Centering) was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to 

RadioMaster TX16S CNC AG01 Hall Gimbal - Choose Version or Set from WREKD Co.

This Radiomaster AG01 Full CNC Hall Gimbal Set was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. 

This Radiomaster AG01 Full CNC Hall Gimbal Set was designed and tested for over a year. This set features both the Self-Centering Gimbal and the Throttle Gimbal. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth

RadioMaster TX16S CNC AG01 Hall Gimbal (Set of 2) w/ Self Centering + Throttle

Designed and tested for over a year, the AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campell, Noical, and Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world’s most competitive racing events.
The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16S to the next level.
Features

Made with CNC processed aviation grade aluminum
Ergonomic stick ends
Non-contact hall sensors, for accurate control inputs and precise centering
Quad precision bearings, for unparalleled stick feel

Specification


Item: AG01 CNC Hall Gimbal Sets
Sensing type: Hall

Working voltage: DC 3.3V
Linearity: Real-time (No delay)
Adjustable travel range: 38°—54°
Adjustable mode: Yes
Adjustable tension: Yes
Quad bearing: Yes
Temperature range: -20°c-85°c
Size: 60*53*56mm
Weight: 125g/pc

Includes

1 * AG01 CNC Hall Gimbal (Throttle)

1 * AG01 CNC Hall Gimbal (Centering)

2 * TX16S Softer Tension Spring Set

2 * Hexagon socket screwdriver

1 * Manual



AG01 CNC Hall Gimbal Set

Designed and tested for over a year, the AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campell, Noical, and Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world’s most competitive racing events. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16S to the next level. Features Made with CNC processed aviation grade aluminum Ergonomic stick ends Non-contact hall sensors, for accurate control inputs and precise centering Quad precision bearings, for unparalleled stick feel Specification Item: AG01 CNC Hall Gimbal Sets Sensing type: Hall Working voltage: DC 3.3V Linearity: Real-time (No delay) Adjustable travel range: 38°—54° Adjustable mode: Yes Adjustable tension: Yes Quad bearing: Yes

This Radiomaster AG01 Full CNC Hall Gimbal (Throttle) was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to the ne

Lumenier has officially teamed up with RadioMaster to bring you the upgraded Lumenier Edition AG01 Full CNC Hall Gimbal Set!

Lumenier has officially teamed up with RadioMaster to bring you the upgraded Lumenier Edition AG01 Full CNC Hall Gimbal Set!
This Special Edition version of the Radiomaster AG01 Full CNC Hall Gimbal Set is custom anodized and was

RadioMaster TX16S CNC AG01 Hall Gimbal Set - Lumenier Edition (Blue)

Pyrodrone

Pyrodrone Adjustable Neck Strap With Metal Buckle

Introducing the new Pyrodrone adjustable neck strap, now available in a beautiful Pyro Orange and Silk Pyro Blue color pattern with our #SENDiT and Pyrodrone Logo. Rep your favorite RC drone retailer and pick up yours today! Check out the rest of our Neck Straps &amp; Lanyards as well as the rest of our Pyro Swag! Feat

RadioMaster TX16S Plastic Folding Handle

Replacement Plastic Folding Handle for RadioMaster TX16S! Check out our RadioMaster TX16S Collection and the rest of our TX16S Replacement Parts! Package Includes: 1 x RadioMaster TX16S Replacement Plastic Folding Handle

RadioMaster TX16S Replacement Plastic Folding Handle

This plastic folding handle is a replacement or spare part for the RadioMaster TX16S Radio Transmitter.

This plastic folding handle is a replacement or spare part for the RadioMaster TX16S Radio Transmitter.
Specifications

Compatible: for TX16S Transmitter
Item Name: Folding Handle
Brand Name: RadioMaster
Material: Plastic
Color: Black
Weight:

RadioMaster TX16S Plastic Folding Handle (Black)

TBS Tango 2 Nostalgia Shell

The Tango 2 transparent shell, leave it as it is or paint it and let your creativity flow. *If you have the Tango 2 with the old screen design, you can purchase the Nastalgia shell for you at the following LINK. **Antenna sold separately. View more radio parts &amp; accessories or more TBS products. Tango With The New 

TBS Tango 2 - Nostalgia Shell (Transparent) for New Screen Design

This Transparent Shell is for the TBS Tango 2. You can customize it and make it yours! This shell is for newer versions of the Tango 2 Radio (after March 2021) which have a slightly larger screen compared to the older versions.

This Transparent Shell is for the TBS Tango 2. You can customize it and make it yours! This shell is for newer versions of the Tango 2 Radio (after March 2021) which have a slightly larger screen compared to the older versions.
T

TBS Tango 2 Nostalgia Shell (New Screen) - Transparent

TBS Mambo Nostalgia Shell

This Transparent Shell is for the TBS Mambo. You can customize it and make it yours. Let the creativity flow!

This Transparent Shell is for the TBS Mambo. You can customize it and make it yours. Let the creativity flow!

VIDEO: TBS Mambo Switch replacement. Nostalgia shell install

Features

Fits the TBS Mambo
Transparent
Paintable



TBS Mambo Nostalgia Shell - Transparent

The Mambo "Nostalgia" transparent shell, leave it as it is or paint it and let your creativity flow. Check out our radio parts &amp; accessories and the rest of our TBS Collection! Includes: 1 x Top Shell 1 x Bottom Shell (With Battery Door &amp; JR Cover) 1 x Front Glass 2 x Gimbal Rings 1 x Scroll Wheel 1 x [Exit Men

TBS Mambo - Nostalgia Shell (Transparent)

Orqa

Orqa FPV.JR Bluetooth Module

Enable your radio controller based on JR Standard module bay with Bluetooth connectivity for seamless wireless connectivity to your favourite simulators on desktop and mobile devices. Orqa FPV.JR Bluetooth is compatible with all radio controllers with JR module bay and desktop (Mac,PC, Linux) and mobile platforms (iOS,

RadioMaster TX16S LED Gimbal Mod

RadioMaster TX16S LED Gimbal Modification Set - Choose Color RadioMaster noticed the URUAV LED Gimbal Mod and released their own kit to make it easier for you. With the RadioMaster Kit, there is no soldering required and installation will not void your warranty. Everything is plug and play! Check out all our Radio Part

RadioMaster TX16S LED Gimbal Mod - Choose Color

Happymodel

Happymodel Molded JR Bay Mounting Case for ES24TX & ES915TX

Happymodel Molding JR Bay mounting case for ES24TX and ES915TX ExpressLRS TX module Check out all our External Modules and the rest of our Happymodel Products! Specifications: Brand Name: Happymodel Materials: Nylon Color: Black Standard JR Bay dimension Weight: 28gram Available for ES24TX ES915TX. Need a bit mod to th

Happymodel Molding JR Bay Mounting Case for ES24TX and ES915TX ExpressLRS TX module

RadioMaster TX16S CNC Upgrade Parts Set

Replacement CNC Metal Folding Handle for RadioMaster TX16S! Check out our RadioMaster TX16S Collection and the rest of our TX16S Replacement Parts! Package Includes: 1 x RadioMaster TX16S CNC Metal Folding Handle - Choose Color

RadioMaster TX16S CNC Metal Folding Handle - Choose Color

DJI FPV Remote Control Sticks

The DJI FPV Control Sticks are designed to control the movements of the aircraft. They are completely detachable for storage or replacement. 

The DJI FPV Control Sticks are designed to control the movements of the aircraft. They are completely detachable for storage or replacement. Simply rotate the control sticks and attach them onto the remote controller when in use, then put them i

DJI FPV Control Sticks

The DJI FPV Control Sticks are designed to control the movements of the aircraft. They are completely detachable for storage or replacement. Simply rotate the control sticks and attach them onto the remote controller when in use, then put them in the dedicated groove when the mobile device clamps are unfolded for stora

TBS Crossfire Micro TX Conversion Kit

This TBS Crossfire Micro Conversion kit allows users to transfer their Crossfire Nano TX internals to the Crossfire Micro casing.



This TBS Crossfire Micro Conversion kit allows users to transfer their Crossfire Nano TX internals to the Crossfire Micro casing.
Includes

1 x JR Bay Pin Headers
2 x Bottom Case
1 x Top Case


﻿This kit is for those who want to transfer their Crossfire Nano TX internals to the Micro casing.  Check out all our External Modules and Accessories and the rest of our TBS Products! Package Includes: 1 x Top Case 2 x Bottom Case 1 x JR Bay Pin Headers

TBS Tracer Micro TX Conversion Kit

This TBS Tracer Micro Conversion kit allows users to transfer their Tracer Nano TX internals to the Crossfire Micro casing.

This TBS Tracer Micro Conversion kit allows users to transfer their Tracer Nano TX internals to the Crossfire Micro casing.
Includes

1 x JR Bay Pin Headers
1 x SMA to UFL Pigtail
2 x Bottom Case
1 x Top Case


This kit is for those who want to transfer their Tracer Nano TX internals to the Micro casing.  Check out all our External Modules and Accessories and the rest of our TBS Products! Package Includes: 1 x Top Case 2 x Botom Case 1 x SMA to UFL Pigtail 1 x JR Bay Pin Headers

TweetFPV

TweetFPV Grip Tape for FrSky X9 Lite

TWEETFPV

Custom grip tape set for the FrSky X9 Lite Transmitter series.
Check out all our RC Transmitters &amp Accessories, as well the rest of our TweetFPV products.
Includes

1x TweetFPV Grip Tape for FrSky X9 Lite


Custom grip tape set for the FrSky X9 Lite Transmitter series. Check out all our RC Transmitters &amp; Accessories, as well the rest of our TweetFPV products. Includes 1x TweetFPV Grip Tape for FrSky X9 Lite

TweetFPV Grip Tape for FrSky X9 Lite - Choose Your Color

Personalize your FrSky X9 Lite with these new grip tapes from TweetFPV! Available in many unique, stylish colors and patterns. Look fresh, and prevent from dropping your expensive Radio!  "If you are like me and prefer to not run your radio with a neck strap then these self adhesive grips will help you get the extra gr

Custom grip tape set for the FrSky X9 Lite Transmitter series.
Check out all our RC Transmitters &ampamp Accessories, as well the rest of our TweetFPV products.
Includes

1x TweetFPV Grip Tape for FrSky X9 Lite


TweetFPV Grip Tape for FrSky X9 Lite - Choose Your Color from WREKD Co.

TweetFPV Grip Tape for BetaFPV LiteRadio 2

Custom grip tape set for the BetaFPV LiteRadio 2 series transmitters.
Check out all our RC Transmitters &ampamp Accessories, as well the rest of our TweetFPV products.
Includes

1x TweetFPV Grip Tape for BetaFPV LiteRadio 2


Custom grip tape set for the BetaFPV LiteRadio 2 series transmitters. Check out all our RC Transmitters &amp; Accessories, as well the rest of our TweetFPV products. Includes 1x TweetFPV Grip Tape for BetaFPV LiteRadio 2

TweetFPV Grip Tape for BetaFPV LiteRadio 2 - Choose Your Color from WREKD Co.

TweetFPV Grip Tape for BetaFPV LiteRadio 2 - Choose Your Color

Personalize your BetaFPV LiteRadio 2 with these new grip tapes from TweetFPV! Available in many unique, stylish colors and patterns. Look fresh, and prevent from dropping your expensive Radio!  "If you are like me and prefer to not run your radio with a neck strap then these self adhesive grips will help you get the ex

Custom grip tape set for the BetaFPV LiteRadio 2 series transmitters.
Check out all our RC Transmitters &amp Accessories, as well the rest of our TweetFPV products.
Includes

1x TweetFPV Grip Tape for BetaFPV LiteRadio 2


TweetFPV Grip Tape for DJI Digital FPV Radio

Custom grip tape set for the DJI Digital FPV Radio transmitters.
Check out all our RC Transmitters &amp Accessories, as well the rest of our TweetFPV products.
Includes

1x TweetFPV Grip Tape for DJI Digital FPV Radio


Custom grip tape set for the DJI Digital FPV Radio transmitters. Check out all our RC Transmitters &amp; Accessories, as well the rest of our TweetFPV products. Includes 1x TweetFPV Grip Tape for DJI Digital FPV Radio

TweetFPV Grip Tape for DJI Digital FPV Radio - Choose Your Color

Personalize your DJI Digital FPV Radio with these new grip tapes from TweetFPV! Available in many unique, stylish colors and patterns. Look fresh, and prevent from dropping your expensive Radio!  "If you are like me and prefer to not run your radio with a neck strap then these self adhesive grips will help you get the 

Custom grip tape set for the DJI Digital FPV Radio transmitters.
Check out all our RC Transmitters &ampamp Accessories, as well the rest of our TweetFPV products.
Includes

1x TweetFPV Grip Tape for DJI Digital FPV Radio


TweetFPV Grip Tape for DJI Digital FPV Radio - Choose Your Color from WREKD Co.

TweetFPV Grip Tape for FrSky X Lite

Custom grip tape set for the FrSky X Lite series transmitters.
Check out all our RC Transmitters &ampamp Accessories, as well the rest of our TweetFPV products.
Includes

1x TweetFPV Grip Tape for FrSky X Lite


Custom grip tape set for the FrSky X Lite series transmitters. Check out all our RC Transmitters &amp; Accessories, as well the rest of our TweetFPV products. Includes 1x TweetFPV Grip Tape for FrSky X Lite

TweetFPV Grip Tape for FrSky X Lite - Choose Your Color from WREKD Co.

TweetFPV Grip Tape for FrSky X Lite - Choose Your Color

Personalize your FrSky X-Lite with these new grip tapes from TweetFPV! Available in many unique, stylish colors and patterns. Look fresh, and prevent from dropping your expensive Radio!  "If you are like me and prefer to not run your radio with a neck strap then these self adhesive grips will help you get the extra gri

TweetFPV Grip Tape for FrSky X-Lite (All Models)

Custom grip tape set for the FrSky X Lite series transmitters.
Check out all our RC Transmitters &amp Accessories, as well the rest of our TweetFPV products.
Includes

1x TweetFPV Grip Tape for FrSky X Lite


Radio Transmitter Accessories