FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Flywoo

Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter - 22AWG 60mm

This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides a convenient solution to all your charging needs.
Check out all our pigtails and connectors as well as our products from Flywoo!
Specifications

Wire Length: 60mm
Wire Gauge: 22AWG
Weight: 1.3g (ea.)
Connector: A30 Female &ampamp PH2.0

Includes

1x Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack


This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides a convenient solution to all your charging needs. Check out all our pigtails and connectors as well as our products from Flywoo! Specifications Wire Length: 60mm Wire Gauge

Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack from WREKD Co.

Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack

FLYWOO

This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides a convenient solution to all your charging needs.
Check out all our pigtails and connectors as well as our products from Flywoo!
Specifications

Wire Length: 60mm
Wire Gauge: 22AWG
Weight: 1.3g (ea.)
Connector: A30 Female &amp PH2.0

Includes

1x Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack


Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm

Flywoo A30-F 22AWG 80mm Pigtail

The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack of A30 Pigtails has each measuring 80mm. Get improved performance and reliability with the ability of up to 15A of continuous current - far higher than the 4.5A of PH2.0 connectors. Discharging more current in the same capacity than PH2.0 crimped pins, A30 connectors provide significantly more power - leading to extended flight time at full throttle on 1S whoop drones. Upgrade to A30 connectors for better performance and reliability.
Check out all our pigtails and connectors as well as our products from Flywoo!
Flywoo factory images say 20awg, but 1st batch shipped are actually 22awg.

Specifications

Wire Length: 80mm
Wire Gauge: 22AWG
Weight: 1.2g (ea.)
Connector: A30 Female

Includes

1x  Flywoo Pigtail A30-F 22AWG 80mm - 5 Pack


The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack of A30 Pigtails has each measuring 80mm. Get improved performance and reliability with the ability of up to 15A of continuous current - far higher than the 4.5A of PH2.0 con

Flywoo Pigtail A30-F 22AWG 80mm - 5 Pack

Flywoo Pigtail A30-F 22AWG 80mm - 5 Pack from WREKD Co.

Generic / No Brand

XT60 Pigtail 14AWG 4" - Female

WREKD General

This XT60 pigtail is ready to be soldered onto your battery! With 14 AWG wire and being about 4 inches long, it&#39s ready to go!
Check out all our pigtails and connectors as well as tools and building supplies!
Specifications

Wire Length: 4&quot
Wire Gauge: 14AWG
Weight: 9g
Connector: XT60 Female

Includes

1x  XT60 Pigtail 14AWG 4&quot Female


Get ready to fly! XT60 Pigtail 14AWG - Female. Solder onto your battery for optimal performance. Check out our range of tools and connectors!

XT60 Pigtail 14AWG 4" - Female from WREKD Co.

XT60 Pigtail 14AWG 4

FPVELITE

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly!
This connector is commonly found on the battery side or output of a power supply. 
Check out all our pigtails and connectors as well as tools and building supplies!
Specifications

Wire Length: 4"
Wire Gauge: 14AWG
Weight: 9g
Connector: XT60 Female

Includes

1x  XT60 Pigtail 14AWG 4" Female


This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly!

XT60 Pigtail 14AWG 4" - Female - For Sale At RaceDayQuads

XT60 Pigtail 14AWG 3"

This XT60 pigtail is ready to be soldered onto your rig or battery! 
Check out all our pigtails and connectors as well as tools and building supplies!
Includes

1 x  XT60 Pigtail 14AWG 3&quot (Male or Female)


Upgrade your rig or battery with this XT60 Pigtail! Solder-ready for seamless connection. Explore our range of pigtails and connectors!

XT60 Pigtail 14AWG 3" - Male or Female from WREKD Co.

XT60 Pigtail 14AWG 3

XT60 Pigtail 14AWG 3" - Male or Female

This XT60 pigtail is ready to be soldered onto your rig! 
Check out all our pigtails and connectors as well as tools and building supplies!
Includes

1x  XT60 Pigtail 14AWG 3"


This XT60 pigtail is ready to be soldered onto your rig!  Check out all our pigtails and connectors as well as tools and building supplies! Includes 1x  XT60 Pigtail 14AWG 3"

PowerWhoop Upgraded 22AWG Solid Pin Whoop Pigtail Connector - PH2.0

This is the PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more power and punch. Be sure that the battery you are using has this connector on it. We carry a 20AWG version and we also carry a 2S version, for doubling up the juice!
Check out the rest of our pigtails, connectors and adapters!
Specifications

Connector: JST-PH2.0, Straight Solid Pins
Dimensions: 22AWGx115mm
Weight: 1.2g

Includes

1x 22AWG Solid Pin Whoop Pigtail Connector - PH2.0


Upgrade your whoop with the PowerWhoop Pigtail PH2.0 Connector for sale at RaceDayQuads. This will help your whoop fly longer and harder, despite its tiny size.

PowerWhoop Pigtail For Sale | Upgraded Whoop Connector PH2.0

16AWG XT30 Pigtail w/ Capacitor

Spare / replacement heavy gauge XT30 pigtail with capacitor.
We also carry a 20AWG version.
Check out the rest of our pigtails &amp connectors!
Specifications

Dimensions: 16AWG x 70mm (80mm Overall)
Capacitor: 16V 100uF
Weight: 4.5g

Includes

1x 16AWG XT30 Pigtail w/ Capacitor


Spare / replacement heavy gauge XT30 pigtail with capacitor.We also carry a 20AWG version.Check out the rest of our pigtails &amp; connectors...

16AWG XT30 Pigtail w/ Capacitor for Sale - RaceDayQuads

SMA Male to Female Rigid (but Flexible) Extension Pigtail

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from any interference that can be caused by your electronics. It can be used on your receiver as well to move your Omni antenna far above your head or to move your patch farther out. 
Check out all our pigtails, connectors and adapters!
Specifications

Weight: 8 grams
Length: 11 cm (measured from the ends of each connector)
Connector: SMA Male/Female 
Coax Cable: 4MM Rigid
Color: Blue

Includes

1x SMA Male to Female Rigid (but Flexible) Extension Pigtail


This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from any interference that can be caused by your electronics. It can be used on your receiver as well to move your Omni antenna far above your head or to move your patch farther o

RDQ 90° MMCX to SMA Pigtail

A high quality 90° MMCX to SMA pigtail. 
Be sure to check out our tools &amp building supplies!
Specifications

Connector: MMCX Male to SMA Female
Length: 80mm
Weight: 4.63g

Includes

1x RDQ 90° MMCX to SMA Pigtail


A high quality 90° MMCX to SMA pigtail.  Be sure to check out our tools &amp; building supplies! Specifications Connector: MMCX Male to SMA Female Length: 80mm Weight: 4.63g Includes 1x RDQ 90° MMCX to SMA Pigtail

RDQ 90° MMCX to SMA Pigtail - Choose Color

XT30 Pigtail 16AWG 3"

A XT30 pigtail with 3 inches of 16AWG cable for all of your micro needs!
We also carry XT30 individual connectors!
Be sure to check out our tools &amp building supplies!
Includes

1x XT30 Pigtail 16AWG 3"


A XT30 pigtail with 3 inches of 16AWG cable for all of your micro needs! We also carry XT30 individual connectors! Be sure to check out our tools &amp; building supplies! Includes 1x XT30 Pigtail 16AWG 3"

XT30 Pigtail 16AWG 3" for Sale RaceDayQuads

RDQ Straight MMCX to SMA Pigtail

A high quality MMCX to SMA pigtail. Available in different lengths. 
Be sure to check out our tools &amp building supplies!
Specifications

Connector: MMCX Male to SMA Female
Length (Overall, ±5mm):

Long: 80mm 
Short: 70mm 

Weight: ~4g

Includes

1x RDQ Straight MMCX to SMA Pigtail


Don't miss out on the MMCX to SMA Pigtail for your VTX. This MMCX to SMA pigtail weighs only 4.63g making it one of the lightest on the market.

RDQ Straight MMCX to SMA Pigtail - Choose Your Length

RDQ Straight MMCX to SMA Pigtail - Choose Your Length - For Sale At RaceDayQuads

XT60 Pigtail 14AWG 4"

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly!
We also have 4 packs in yellow or black.
Check out all our pigtails and connectors as well as tools and building supplies!
Includes

1x  XT60 Pigtail 14AWG 4"


This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! Check out all our pigtails and connectors as well as tools and building supplies!

XT60 Pigtail 14AWG 4" - Choose Your Version

XT60 Pigtail 14AWG 4" - Choose Your Version - For Sale At RaceDayQuads

PowerWhoop Upgraded 20AWG Solid Pin Whoop Pigtail Connector - PH2.0

This is the latest PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more power and punch. Be sure that the battery you are using has this connector on it.
We also carry a 2S version, for doubling up the juice!
Check out the rest of our pigtails, connectors and adapters!
Specifications

Connector: JST-PH2.0, Straight Solid Pins
Dimensions: 20AWGx115mm
Weight: 1.2g

Includes

1x 20AWG Solid Pin Whoop Pigtail Connector - PH2.0


WREKD Co.

This is the latest PH 2.0 solid pin pigtail connector, also known as the &quotPower Whoop Connector&quot. This connector will allow you to fly longer and with more power and punch. Make sure that the battery you are using has this connector on it.
We also carry a 2S version, for doubling up the juice!
Check out the rest of our pigtails, connectors and adapters!
Specifications

Connector: JST-PH2.0, Straight Solid Pins
Dimensions: 20AWGx115mm
Weight: 1.2g

Includes

1x 20AWG Solid Pin Whoop Pigtail Connector - PH2.0


Upgrade your power with the PH 2.0 solid pin pigtail connector. Fly longer and stronger with this must-have accessory for FPV drones.

PowerWhoop Upgraded 20AWG Solid Pin Whoop Pigtail Connector - PH2.0 from WREKD Co.

SMA Pigtail U.FL Connector for VTXs

This 3" SMA to UFL pigtail will fit most VTXs with the same connector.
Check out the rest of our pigtails, adapters &amp connectors!
Includes

1x SMA Pigtail U.FL Connector for VTXs - Choose Type


This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters &amp; connectors! Includes 1x SMA Pigtail U.FL Connector for VTXs - Choose Type

SMA Pigtail U.FL Connector for VTXs - Choose Your Version

SMA Pigtail U.FL Connector for VTXs - Choose Your Version - For Sale At RaceDayQuads

XT60 Lipo Pigtail w/ 35V 1000uF Capacitor 12AWG 3 Pack

Lumenier

Black XT60 Lipo Pigtail w/ 35V 1000uF Capacitor 12AWG (3pcs)

Use these lipo pigtails to connect your XT60 lipo to your multi-rotor or other builds! Kit includes 10cm (approx. 4 inch.) long 12AWG silicone wire attached to an XT60 connector with a 35V 1000uF capacitor attached.
Specifications

Cable: 10cm 12A

Use these lipo pigtails to connect your XT60 lipo to your multi-rotor or other builds! Kit includes 10cm (approx. 4 inch.) long 12AWG silicone wire attached to an XT60 connector with a 35V 1000uF capacitor attached. Check out our entire selection of Connectors and Charging Leads! Specifications Cable: 10cm 12AWG Capaci

XT60 Lipo Pigtail w/ 35V 680uF Capacitor 16AWG 3 Pack

A set of Black XT60 Lipo Pigtails with 35V 680uF Capacitor 16AWG (3pcs)

Use these lipo pigtails to connect your XT60 lipo to your multi-rotor or other builds! Kit includes 10cm (approx. 4 inch.) long 16AWG silicone wire attached to an XT60 connector with a 35V 680uF capacitor attached.
Specifications

Cable: 10cm 16AW

Black XT60 Lipo Pigtail w/ 35V 680uF Capacitor 16AWG (3pcs)

Use these lipo pigtails to connect your XT60 lipo to your multi-rotor or other builds! Kit includes 10cm (approx. 4 inch.) long 16AWG silicone wire attached to an XT60 connector with a 35V 680uF capacitor attached. Check out our entire selection of Connectors and Charging Leads! Specifications Cable: 10cm 16AWG Capacit

TBS Sixty9 9-Pin Pigtail

Replacement pigtail for TBS Sixty9 Check out all ourall our TBS Crossfire Related Gear and the rest of the  TBS Products!  Package Includes: 1 x TBS Sixty9 9-Pin Pigtail

BetaFPV

BetaFPV 4-5S Whoop Cable Pigtail - XT60

This power cable with XT60 connector is specially made for 4-5S whoop drone, soldered with the capacitor specification with 25V/680μF, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage, Its supportive power is up to 4-5S, fits for F4 AIO 20A FC and X-Knight 4'' quad. Bullet 

BetaFPV 4S Whoop Cable Pigtail - XT30

This power cable with XT30 connector is specially made for 4S whoop drone, soldering with the capacitor specification with 25V/220μF/20%, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage, Its supportive power is up to 4S, fits for F4 V2 4S FC and F4 2-4S AIO FC on Beta85X 4

BetaFPV BT2.0 1S Whoop Pigtail Cable 6 Pack

BETAFPV

BETAFPV BT2.0 Power Whoop Connector Cable for Meteor65.

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone, like the BETAFPV Metor65.
BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana c

BETAFPV BT2.0 Power Whoop Connector Cable (6pcs)

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.
BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.
Features

BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
With the light and customized 22AWG wire, it will make the drone lighter. The wire uses US standard core 0.08mm*60. The diameter of the silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.

Specifications

Item: BT2.0 1S Whoop Cable Pigtail
Wire Type: 22AWG
Connect: BT2.0 Male Connector
Length: 55mm (Not included the plug)
Weight: 0.91g/pc
Battery: BT2.0 300mAh 1S Battery
FC: F4 1S Brushless FC


How to Resolder Your Board with BT2.0 Cable
BT2.0 1S Whoop Cable Pigtail is composed of blue wire and white wire. The blue wire is the positive pole(+), the white wire is the negative pole(-). When you resolder your board, please pay attention to the connection method.

Includes

6 x BT2.0 1S Whoop Drone Female Power Cable





BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushl

BETAFPV BT2.0 Power Whoop Connector Cable (6pcs) from WREKD Co.

BT2.0 Connector - the most significant revolution in 1S Whoop Drone! 
BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it&#39s worth to switch BT2.0? Check more from Joshua Bardwell&#39video- Proof that BT2.0 connector is better than PH 2.0

Features


BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning. 
With the light and customized 22AWG wire, it will make the drone more lighter. The wire uses US standard core 0.08mm*60. The diameter of silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.

There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.

Specifications

Item: BT2.0 1S Whoop Cable Pigtail
Wire Type: 22AWG
Connect: BT2.0 Male Connector
Length: 55mm (Not included the plug)
Weight: 0.91g/pc


Includes

6x BetaFPV BT2.0 1S Whoop Pigtail Cable


How to re-solder your FC pigtail
BT2.0 1S Whoop Cable Pigtail is composed of blue wire and white wire. The blue wire is the positive pole(+), the white wire is the negative pole(-). When you resolder your board, please pay attention to the connection method.

Here is Mr ShutterBug&#39vedio to show you the way of replacing connectors safely.





BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless 

BetaFPV BT2.0 1S Whoop Pigtail Cable 6 Pack from WREKD Co.

BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of a brushless whoop drone, and displays the perfect performance of your drone with a BT2.0 300mAh 1S battery.
Specifications

Wire Gauge: 22AWG
Connector: BT2.0 (male)
Length: 55mm
Weight: 0.91g
Maximum Input Voltage: 1s

Includes

6x BetaFPV BT2.0 Whoop Pigtails


BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of a brushless whoop drone, and displays the perfect performance of your drone with a BT2.0 300mAh 1S battery. Specifications Wire Gauge: 22AWG Connector: BT2.0 (male) Length: 55mm Weight: 0.91g Maximum Input Voltage: 1s Includes 6x BetaFPV BT2.0 Whoop Pigtails

BetaFPV BT2.0 Whoop Pigtails 6 Pack

XT30 Pigtail 16AWG 10cm

This is a 10cm long XT30 pigtail with 16AWG silicone wires.Perfect for micro builds   Package includes : 1 x XT30 PIGTAIL 16AWG 10CM

Wiring, Adapters and Cables