FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Caddx

Caddx Polar Nano Vista Kit for DJI

CADDXFPV

The Caddx Polar Nano Vista Kit has a Small Camera but Big Sensor. Ultra-Lightweight which is only 2.7g and 14mm Nano size camera, perfect for tiny Drones. 1/1.8 inch HD Digital Starlight Sensor - Min. Illumination: 0.00003 Lux. Excellent low light capability.

CADDXFPV Polar Nano Vista Kit | HD Starlight Digital Camera FPV System – CADDX FPV

CADDXFPV Polar Nano Starlight Vista Kit

Small Camera - Big SensorNew 1.5g lightweight Antenna1/1.8 inch HD Digital Starlight Sensor14*14mm Nano size camera2.7g lightweight - The perfect partner for tiny camerasLow latency HD image

CADDX Polar Nano Vista Kit shipped fast from the best source for all your FPV gear, RMRC! Free shipping for qualified orders using the shipping deal. 

CADDX Polar Nano Vista Kit - RMRC

CADDX Polar Nano Vista Kit

The Caddx Polar Nano Starlight Camera Vista Kit is a low-light camera with a 1/1.8" digital starlight sensor. This camera has low-latency HD image transmission video recorded through the DJI FPV Goggles. 

The Caddx Polar Nano Starlight Camera Vista Kit is a low-light camera with a 1/1.8

Caddx Polar Nano Starlight Camera Vista Kit

VTX Frequency

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.

Video Transmitters

VTX Stack Mount

VTX Antenna Connector

Max Transmission Power

Digital / Analog VTX

FPV Camera Included

Caddx Polar Micro Digital FPV Air Unit Camera Kit

The Caddx Air Unit Polar Starlight supports brightness and saturation adjustment. 1/1.8-Inch HD Digital Starlight Sensor. Excellent Image Quality and Brilliant True Colors.

CADDXFPV Polar Starlight Digital Camera | HD FPV Drones Camera System – CADDX FPV

CADDXFPV Polar Starlight Air Unit

Caddx Polar Micro Digital FPV Air Unit Camera Kit - Coffee

Caddx Air Unit Polar Starlight Digital HD DJI FPV System

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

Caddx Air Unit Polar Starlight Digital HD DJI FPV System - RMRC

Caddx Polar Micro Digital FPV Air Unit Camera Kit - Silver

Caddx Polar Micro Vista Kit for DJI

The Caddx Polar Vista Kit is the best night vision digital HD Kit. It supports brightness and saturation adjustment. 1/1.8 inch starlight large sensor, with an excellent night vision. Min.Illumination: 0.00003 Lux, ultra low noisy. Excellent Image Quality, Brilliant True Colors.

CADDXFPV Polar Starlight Vista Kit | HD Digital Camera |FPV Drones Camera – CADDX FPV

CADDXFPV Polar Starlight Vista Kit

1/1.8 - inch HD Digital Starlight SensorLow latency HD image transmission New 1.5g lightweight antennaCustom F/1.6 Large Aperture LensExcellent Image Quality &amp Brilliant True ColorsSupport Brightness &amp Saturation AdjustmentMenu Board not Included1.5g Antenna ipex

Caddx Polar Vista Starlight Micro Digital FPV Camera Kit Silver - www.readymaderc.com

Caddx Polar Vista Starlight Micro Digital FPV Camera Kit Silver

Caddx Polar Vista Kit Starlight Digital HD FPV System

Caddx Polar Vista Kit Starlight Digital HD DJI FPV System - RMRC

Caddx Polar Vista Kit Digital HD DJI FPV System

Caddx FPV

The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency of 32 ms. The vista unit can be mounted on a racing drone and used with DJI FPV Goggles or a remote controller to transmit video, control signals, and flight controller information wirelessly!
Check out all our DJI-compatible gear and our CADDX product selection!

Features

Lightweight digital image transmission combination
Stable and clear HD video
720p 60fps, 32ms/4km
8 channels, 8 drones



Specification

Transmitter Power(EIPP): FCC/SRRC: &amplt30dBm CE: &amplt14dBm
Max.Transmission Distance: FCC/SRRC:4kmCE:0.7km
Operating Temperature Range: 0°to 40°C（32°to 104°F）
Image Sensor: 1/1.8&quot Inch 2.3Mega starlight sensor
Supported Flight Control System: BetaFlight
Min.Latency(end-to-end): 720p 60fps&amplt32ms
Polar vista kit Weight (Include camera): 28g
Operating Frequency: 5.725-5.850GHz
I/O Interface: USB-C,IPEX,3-in-1 port
FOV: 162°(D) 138°(H) 75°(V)
Min. Illumination: 0.00003Lux
Antenna Weight: 1.5g(IPEX)
Polar cam: 24×19×19mm
Input Power: 7.4-26.4V
Coaxial Cable: 120mm
LENS: F/1.6
Vista: 30×29×13.5mm
Aspect Ratio: 16:9
Antenna: 105mm

Includes

1x Polar Vista Kit (in silver or coffee colors)
6x M2 screws 3/4/5mm
4x Gasket Ring
1x 3-in-1 cable
1x Menu cable


The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency of 32 ms. The vista unit can be mounted on a racing drone and used with DJI FPV Goggles or a r

Caddx Polar Micro Starlight Vista Kit - Choose Color from WREKD Co.

Caddx Polar Micro Starlight Vista Kit - Choose Color

Caddx Air Unit Micro Kit for DJI

DJI revolutionized FPV with the development of their digital HD technology. This resulted in a huge upgrade from the original analog resolution to a fully digital 720p signal right in your goggles. 
The DJI FPV Air Unit provides ultra-low latency HD digital image transmission, built-in 1080p/60fps DVR recording, and eight frequency channels to allow up to eight pilots to fly simultaneously.

 




Specifications

WeightAir Unit (Camera included): 45.8 g3.9 g (MMCX elbow each)
DimensionsAir Unit: 44 × 37.8 × 14.4 mmCamera: 27.4 × 21.1 × 20.1 mmCoaxial Cable: 100 mm
Operating Frequency: 5.725-5.850 GHzTransmitter Power (EIRP): FCC/SRRC: &lt30 dBm CE: &lt14 dBm
Min. Latency (end-to-end)Low Latency Mode (720p/120fps): &lt28 msHigh-Quality Mode (720p/60fps): &lt40 ms
Max. Transmission Distance: FCC/SRRC: &lt4 km CE: &lt0.7 kmVideo Format: MP4 (Video format: H.264 Audio format: ACC-LC)I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slotOperating Temperature Range: 32° to 104°F (0° to 40°C)Input Power: 7.4-17.6 V, about 4-9 WSensor: 1/3.2'' CMOS Effective Pixels: 4 MLens: 2.1 mm, f/2.1Shutter: Rolling shutterISO: 100-25600FOV: 150°(D) 122°(H) 93°(V)Dimension: 22.1 × 21.1 × 20.1 mmWeight: 8.2 g
Channels: 8Channels InfoFCCChannel 1: 5660Channel 2: 5695Channel 3: 5735Channel 4: 5770Channel 5: 5805Channel 6: 5878Channel 7: 5914Channel 8: 5839
Compatibility

DJI FPV Goggles
DJI FPV Remote Controller

Tips
The air unit may become hot during or after operation.DO NOT touch the air unit before it cools down.DO NOT use the air unit for an extended period when there is no external cooling equipment. Otherwise, the air unit may overheat and enter overheat protection mode. Keep the antennas of the air unit at least 40 mm apart.Keep the air unit away from metal objects or carbon fiber frames. Make sure to choose a position where the transmission will not be blocked during flight.
Includes

DJI FPV Air Unit (with camera and four M2 screws) × 1
Three-in-one cable × 1
Antenna (MMCX elbow) × 2



DJI revolutionized FPV with the development of their digital HD technology. This resulted in a huge upgrade from the original analog resolution to a fully digital 720p signal right in your goggles.  The DJI FPV Air Unit provides ultra-low latency HD digital image transmission, built-in 1080p/60fps DVR recording, and ei

Caddx DJI FPV Air Unit

<div style="text-align: left"><span style="color: #000000">Only <a href="https://caddxfpv.com/collections/digital-cameras-1/products/air-unit-micro-camera" target="_blank" rel="noopener noreferrer">Caddx air unit micro camera</a> + cable left in stock (excluding Air Unit)</span></div>
<div style="text-align: left"><span style="color: #000000">Note: The camera will be packed in a static bag.</span></div>
<div style="text-align: left">
<div class="YQaNob" data-cp="1" data-is-ver="false" data-nnttsvi="1" data-sm="1" data-sugg-time="500" data-sugg-url="https://clients1.google.com/complete/search" data-uilc="zh-CN" id="tw-container">
<div jsname="gI9xcc" jsslot="1">
<div jscontroller="geqCid" jsdata="SANFE_B8xgqs" jsaction="uQxhTd:d4hecblWUBqb:TO5MWbIcWBXe:hLaFAeKFlBO:UuREqbM2HAEc:eNrnOdrcuQ6b:npT2md">
<div class="tw-src-ltr" id="tw-ob">
<div class="oSioSc">
<div id="tw-target">
<div id="kAz1tf" class="g9WsWb">
<h1 class="tw-ta-container hide-focus-ring tw-nfl" id="tw-target-text-container" tabindex="0">
<span style="color: #362121"></span><br>
</h1>
<br>
</div>
</div>
</div>
</div>
<h1 class="dURPtb"><br></h1>
<div jsname="gI9xcc" jsslot="1"><br></div>
</div>
</div>
</div>
<div class="KFFQ0c"><br></div>
<br>
</div>
<div style="text-align: left">
<img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/CaddxFPV_Air_Unit_Micro_Version_Pre-order1_7c954fb1-6449-435b-93fc-8449b19a648e.jpg?v=1619604267" alt=""><img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/CaddxFPV_Air_Unit_Micro_Version_Pre-order2_6c5fb1fe-b49f-4d65-8023-7dbad644f266.jpg?v=1619604291" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/CaddxFPV_Air_Unit_Micro_Version_Pre-order2_6c5fb1fe-b49f-4d65-8023-7dbad644f266.jpg?v=1619604291">
</div>

The Caddx Air Unit Micro Version is a 19*19mm micro sized camera. Which is with 28ms Low-Latency, 720p/120fps Video Transmission. Anti- Interference Digital Transmission.

CaddxFPV Air Unit Micro Version for DJI Digital HD FPV System – CADDX FPV

Only Caddx air unit micro camera + cable left in stock (excluding Air Unit)
Note: The camera will be packed in a static bag.




























CADDXFPV Air Unit Micro Version

The Original DJI Digital HD FPV Air Unit Kit is back - Limited Quantities Available! This is the original DJI Air Unit with 120fps HD camera.

#html-body [data-pb-style=A8LL067]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=E3X6N6P]{border-sty

DJI Digital HD FPV Air Unit Kit - Original Version

The CaddxFPV Air Unit Micro Version is a 19x19 micro-sized camera with low-latency digital video transmission. The Air Unit Transmission technology utilizes a two-way communication system to stabilize signal connections, granting pilots more flexibility w

#html-body [data-pb-style=TJ95LXD]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=LSAL627]{border-sty

Caddx Air Unit Micro Version for DJI Digital HD FPV System

The CaddxFPV Air Unit Micro Version is a 19x19 micro-sized camera with low-latency digital video transmission. The Air Unit Transmission technology utilizes a two-way communication system to stabilize signal connections, granting pilots more flexibility when flying through challenging areas. Modern innovations, like a strong transmission system embedded remote controller receiver, and multi-antenna technology, is why the Air Unit can perform remarkably.

Caddx Air Unit Micro Version For DJI Digital HD FPV System - www.readymaderc.com

FPV through the DJI Digital HD Air Unit. The way FPV is meant to be. This is the Caddx DJI air unit with 120fps HD camera.

#html-body [data-pb-style=X1JWCW9]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=DM752LO]{border-sty

Caddx DJI Digital HD FPV Air Unit Kit

Caddx Nebula Pro Vista Kit for DJI










Capture stunning aerial video with the Caddx Nebula Pro Vista Kit. This lightweight kit comes with a 12cm cable and is designed to ensure a clear, high quality image. The Pro Vista Kit produces vibrant colors, deep contrast, and sharp details with minimal distortion. 
The Caddx Nebula Pro Digital FPV Camera Kit is another advanced video transmission module by Caddx and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Caddx Nebula Pro with Vista is designed for FPV drones and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range up to 4km. The Vista system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.
User can wirelessly connect their Vista Kit to the DJI FPV Remote Controller and DJI FPV Goggles without having to purchase additional receivers, as well mount on racing drones!









Check out the entire DJI System product line, our DJI compatible gear and our CADDX selection!
Features

Lightweight digital image transmission combination
Embedded Remote Controller Receiver
Stable and clear HD video
720p/120fps
28ms of latency over 4km
27g weight
8 video channels


Specifications

Model: Nebula Pro Vista Kit
Weight: Vista Kit(camera included): 25g 
Weight(Antenna): 1.5g
Dimensions(Vista Kit): 30 x 29 x 13mm
Dimensions(Camera): 19 x 19 x 20mm
Dimensions(Coaxial Cable): 120mm
Operating Frequency: 5.725-5.850GHz
Transmitter Power(EIPP): FCC/SRRC/MIC: &amplt30dBm
CE: &amplt14dBM
Min. Latency(end-to-end): Low Latency Mode(720p 120fps): 21-28ms
Max. Transmission Distance: FCC/SRRC: 4km CE: 0.7km
I/O Interface: USB-C, IPEX, 3-in-1port
Supported Flight Control System: F3,F4,F7
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Input Power: 7.4-26.4V
Power Output: 25W/200mW/500mW/700mW
Hardware Included: Vista/Nebula pro/coaxial-cable/antenna
Goggles: Work with DJI goggles
Camera(sensor): 1/3&quot CMOS
Camera(Lens): 2.1mm
Camera(Shutter): Rolling Shutter
Camera(FOV): 150°(D)122°(H)93°(V)

Includes

Caddx Nebula Pro Vista Kit w/ 12cm Cable - Black


Capture stunning aerial video with the Caddx Nebula Pro Vista Kit. This lightweight kit comes with a 12cm cable and is designed to ensure a clear, high quality image. The Pro Vista Kit produces vibrant colors, deep contrast, and sharp details with minimal distortion.  The Caddx Nebula Pro Digital FPV Camera Kit is anot

Caddx Nebula Pro Vista Kit w/ 12cm Cable - Black from WREKD Co.

Caddx Nebula Pro Vista Kit w/ 12cm Cable - Black

CADDX










Capture stunning aerial video with the Caddx Nebula Pro Vista Kit. This lightweight kit comes with a 12cm cable and is designed to ensure a clear, high quality image. The Pro Vista Kit produces vibrant colors, deep contrast, and sharp details with minimal distortion. 
The Caddx Nebula Pro Digital FPV Camera Kit is another advanced video transmission module by Caddx and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Caddx Nebula Pro with Vista is designed for FPV drones and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range up to 4km. The Vista system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.
User can wirelessly connect their Vista Kit to the DJI FPV Remote Controller and DJI FPV Goggles without having to purchase additional receivers, as well mount on racing drones!









Check out the entire DJI System product line, our DJI compatible gear and our CADDX selection!
Features

Lightweight digital image transmission combination
Embedded Remote Controller Receiver
Stable and clear HD video
720p/120fps
28ms of latency over 4km
27g weight
8 video channels


Specifications

Model: Nebula Pro Vista Kit
Weight: Vista Kit(camera included): 25g 
Weight(Antenna): 1.5g
Dimensions(Vista Kit): 30 x 29 x 13mm
Dimensions(Camera): 19 x 19 x 20mm
Dimensions(Coaxial Cable): 120mm
Operating Frequency: 5.725-5.850GHz
Transmitter Power(EIPP): FCC/SRRC/MIC: &lt30dBm
CE: &lt14dBM
Min. Latency(end-to-end): Low Latency Mode(720p 120fps): 21-28ms
Max. Transmission Distance: FCC/SRRC: 4km CE: 0.7km
I/O Interface: USB-C, IPEX, 3-in-1port
Supported Flight Control System: F3,F4,F7
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Input Power: 7.4-26.4V
Power Output: 25W/200mW/500mW/700mW
Hardware Included: Vista/Nebula pro/coaxial-cable/antenna
Goggles: Work with DJI goggles
Camera(sensor): 1/3" CMOS
Camera(Lens): 2.1mm
Camera(Shutter): Rolling Shutter
Camera(FOV): 150°(D)122°(H)93°(V)

Includes

Caddx Nebula Pro Vista Kit w/ 12cm Cable - Black


The Caddx Nebula Pro Vista Kit 720p/120fps Low Latency HD Digital FPV System is the next generation Vista set with new and improved Nebula Pro camera. The Caddx Nebula Pro Digital FPV Camera Kit is another advanced video transmission module by Caddx and fully authorized by DJI that supports a 5.8GHz digital video signa

Caddx Nebula Pro Vista Kit 720p/120fps Low Latency HD Digital System For DJI FPV

The Caddx Nebula Pro Vista Kit 720p/120fps Low Latency HD Digital FPV System is the next generation Vista set with new and improved Nebula Pro camera.

The Caddx Nebula Pro Vista Kit 720p/120fps Low Latency HD Digital FPV System is the next generation Vista set with new and improved Nebula Pro camera.
The Caddx Nebula Pro Digital FPV Camera Kit is another advanced video transmission module by Caddx

Caddx Nebula Pro Vista Kit 720p/120fps Low Latency HD Digital FPV System

The Caddx Nebula Pro with Vista is designed for FPV drones. Provide digital high-definition picture and transmission range up to 4km. The Vista system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.

CADDXFPV Nebula Pro Vista Kit FPV Digital Camera | HD FPV Drones Camera – CADDX FPV

CADDXFPV Nebula Pro Vista Kit

Caddx Vista Unit for DJI Digital HD FPV

Caddx Vista Digital HD Unit for DJI HD FPV.

Caddx Vista Digital HD Unit for DJI HD FPV.
Note: This is the HD transmitter unit only and does NOT come with the camera, coaxial cable, or antenna.

Looking for the full Caddx Vista system?
Features

20x20mm mounting
Stable and clear HD Video

Caddx Vista Unit for DJI Digital HD FPV (No Camera)

<h3>Does not include coaxial cable and antenna</h3>
<h3>Only vista module</h3>

Does not include coaxial cable and antenna Only vista module

Vista Unit Module – CADDX FPV

Does not include coaxial cable and antenna
Only vista module

Vista Unit Module

RunCam

About this product The RunCam Link Wasp is a digital FPV system that is DJI FPV Remote Controller compatible. Users can connect their DJI FPV Remote Controller without having to purchase additional receivers. This reduces costs and is easy to set up for every pilot.  The HD transmission system of the FPV Air Unit can a

RunCam Link Wasp Digital HD FPV Camera System

Runcam

The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones, and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km. The Link system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.
Specifications

Link VTX

Frequency: 5.725-52.850GHz
Maximum Distance: FCC / SRRC &lt 4KM
Working Voltage: 7.4-26.4V @4-9W
Dimensions: 29x29x13mm
Weight: 19.5g

Wasp Camera

Image Sensor: 1/3"
FOV: D155° H125° V96°
Dimensions 19x19x19mm
Cable Length: 120mm
Shutter: Rolling
Weight: 7.5g (with cable)
Resolution: 720P 120FPS (4:3)


Includes

1x Link VTX
1x Wasp Camera
1x Antenna
1x 6-Pin JST Cable


The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones, and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km. The Link system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.

Link with Wasp Camera For DJI HD Video System

The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones, and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km. The Link system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience. Specifications Link VTX Frequency: 5.725-52.850GHz Maximum Distance: FCC / SRRC &lt; 4KM Working Voltage: 7.4-26.4V @4-9W Dimensions: 29x29x13mm Weight: 19.5g Wasp Camera Image Sensor: 1/3" FOV: D155° H125° V96° Dimensions 19x19x19mm Cable Length: 120mm Shutter: Rolling Weight: 7.5g (with cable) Resolution: 720P 120FPS (4:3) Includes 1x Link VTX 1x Wasp Camera 1x Antenna 1x 6-Pin

The RunCam Link Wasp is a digital FPV system that is DJI FPV Remote Controller compatible.

#html-body [data-pb-style=D6E62YA],#html-body [data-pb-style=E68597F],#html-body [data-pb-style=KYLNJ7O],#html-body [data-pb-style=S66C4J8],#html-body [data-pb-style=TVA62SV]{justify-content:flex-start;display:flex;flex-direction:column;background-po

The Runcam Link Wasp HD Camera and VTX Kit 720p/120fps Low Latency HD Digital FPV System is the next generation Link set with new Wasp camera. The  Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 7

RunCam Link Wasp DJI FPV HD Micro Camera and VTX Kit

RUNCAM

The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km. The Link system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.
User can wirelessly connect their Link Kit to the DJI FPV Remote Controller and DJI FPV Goggles without having to purchase additional receivers.Phoenix HD camera also available separately!Check out all our DJI-compatible gear, and our RunCam selection!Features

Beautiful 1280x720@120fps FPV feed
Excellent low-light performance
Microform factor for better frame compatibility




Specifications
Phoenix Wasp HD Camera

Image Sensor: 1/3”
Resolution: 720p@120fps(4:3)
LENS: FOV D:155° H:125° V:96°
Shutter: Rolling Shutter
Coaxial Cable: 120 mm
Dimensions: L19mmxW19mmxH19mm
Net Weight: 7.5g

Link Air Unit

Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz

Transmitter Power: (EIRP) FCC/SRRC: &lt30 dBm CE: &lt14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km CE: 0.7 km
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Coaxial Cable: 120 mm
Dimensions: 29x29x13mm

Weight(camera included): 27g


Includes

1x RunCam Link Wasp HD Micro Kit for DJI

1x RunCam Link Air Unit

1x RunCam Link U.FL Antenna
1x 6 Pin Cable - JST-SH1.0 
1x 12cm Cable



The RunCam Link Phoenix HD Kit for DJI is the perfect companion for your DJI digital FPV setup. Get crisp, smooth HD video feeds from yoru build today.

RunCam Link Phoenix HD Kit for DJI for Sale - RaceDayQuads

The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km. The Link system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.
User can wirelessly connect their Link Kit to the DJI FPV Remote Controller and DJI FPV Goggles without having to purchase additional receivers.Phoenix HD camera also available separately!Check out all our DJI-compatible gear, and our RunCam selection!Features

Beautiful 1280x720@120fps FPV feed
Excellent low-light performance
Microform factor for better frame compatibility




Specifications
Phoenix Wasp HD Camera

Image Sensor: 1/3”
Resolution: 720p@120fps(4:3)
LENS: FOV D:155° H:125° V:96°
Shutter: Rolling Shutter
Coaxial Cable: 120 mm
Dimensions: L19mmxW19mmxH19mm
Net Weight: 7.5g

Link Air Unit

Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz

Transmitter Power: (EIRP) FCC/SRRC: &amplt30 dBm CE: &amplt14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km CE: 0.7 km
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Coaxial Cable: 120 mm
Dimensions: 29x29x13mm

Weight(camera included): 27g


Includes

1x RunCam Link Wasp HD Micro Kit for DJI

1x RunCam Link Air Unit

1x RunCam Link U.FL Antenna
1x 6 Pin Cable - JST-SH1.0 
1x 12cm Cable



The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones and it can be used with DJI FPV Goggles, wh

RunCam Link Wasp HD Micro Kit for DJI from WREKD Co.

RunCam Link WASP Kit - RMRC

RunCam Link WASP Kit

About this product, The RunCam Link Wasp is a digital FPV system that is DJI FPV Remote Controller compatible. Users can connect their DJI FPV Remote Controller without having to purchase additional receivers. This reduces costs and is easy to set up for every pilot. The HD transmission system of the FPV Air Unit can a

DJI O3 Air Unit

Summary


Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent video transmission quality with high definition, low latency, and at long distances. It comes with a 1/1.7-inch sensor, a 155° super-wide FOV, and rich compatibility, providing a powerful video transmission solution for your assembled aircraft.
DJI O3+ Flagship Transmission
Transform your video transmission experience. It supports a max video transmission quality of 1080p/100fps from up to 10 km. [1]
Next-Level Imaging Performance
Equipped with a 1/1.7-inch sensor, the DJI O3 Air Unit can shoot 4K/60fps video with a 155° super-wide FOV, giving you richer image details. It also comes with 20GB built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32).
Canvas Mode
Canvas Mode lets you customize the OSD information on the screens of DJI Goggles 2 or DJI FPV Goggles V2, and adjust PID parameters.
Compact and Richly Compatible
Packed with richer compatibility in a lightweight body. DJI Goggles 2 and DJI FPV Remote Controller 2 are also smaller in size. [5]





Cameras


 	Matrix:  1/1. 7ª CMOS Effective pixels: 48 MP
 	Lens:  Fiek of View (FOV): 155* Equivalent Focal Length: 12.7mm Focal Length. 2.34mm
 	Aperture: 62 8 Focus Mode: FF Focus Range: 0.6m to w
 	ISO range:  100-6400(Auto) 100-25600(Manual)
 	Snapshot:  Roll Shutter
 	Field of View (FOV):  155°
 	Video resolution:
 	With D.I Goggles 2 4K @ 50/60FPS 2.7K @ 50160/100FPS 1080p @50/60/100FPS
 	With DJI FPV Goggles V2: 4K &ampamp 50/00FPS 2.7K 50/60/100/120FPS @ 1080p 50160/100/120FPS
 	Video Format:  MP4
 	Electronic Image Stabilization (EIS):  The product supports RockSteady technology.
 	Libra:  Approx. 8.3 g (including coaxial cable)

Air Unit Module


 	Libra:  Air Unit (without Camera Unit): Approx. 28g Air Unit (including Camera Unit) Approx. 36.4g
 	Antenna: Approx. 3g
 	Dimensions (L× W x H):
 	Transmission module: 325 x 30.5 x 11.5 mm (L x W x H)
 	Camera module. 21.2 x 20 x 19.5 mm (Lx W x H)
 	Coaxial cable: 115 mm (length ) 3-in-1 cable: 100mm(length) Antenna. 85mm (length)
 	Communication frequency:  2.400-2.4835 GHz (RX only) 5.725-5.850 GHz (RX and TX)
 	Transmission power (EIRP) :  FCC: «33dBm CE. &amplt14dBm SRRC: «30dBm
 	Live view quality and and delay:
 	With DJI FPV Goggles V2:810p/120FPS video transmission quality. less than 28ms alency. 810p/60fps video steaming quality. less than 40ms latency
 	With DJI FPV Goggles 2: 1080p/80FPS video streeming quality:less than 30ms latency. 1080p/60FPS video streaming quality: less than 40ms latency.
 	Video transmission range:  10km (FCC), 2km (CE) 6km (SRRC)
 	Flight controller software supported:  Compatible with flight controller software that supports Betaflight Please see product FAQ for more information.
 	Input voltage:  7.4.26 4V
 	Working temperature:  10°C to 10°C (14°F to 104°F)
 	Channels:  Auto mode support
 	Manual mode support: 40 MHz: 1 channel: 20MHz 3 channels10MHz: 32 channels
 	Channel information: FCC / SRRO / CE: 40 MHz: Ch 1: 5794 5 MHz 20 MHz / 10 MHz: Ch 1: 5768.5MHz Ch 2: 5804.5 MHz Ch 3: 5839.5 MHz
 	Supported SD cards:  microSD (up to 256GB)
 	Recommended microSD cards:
 	DJI Goggles supported
 	SanDisk Extreme U3 V30 A1 32GB
 	microSDXC SanDisk Extreme Pro U3 V30 A132GB
 	microSDXC Kingston Canvas GolPlus U3 V30 A2 64GB
 	microSOXCKingston Canvas React Plus U3 V90 A1 64GB
 	microSDXC Kingston Canvas ReactPlus U3 V90 A1 128GB
 	microSDXC Kingston Canvas React Plus U3 V90 A1256GB
 	microSDXC Samsung PRO PlUS U3 V30 A2 256GB
 	DJI Goggles Supported:  DJI Goggles 2 and DJI FPV Goggles V2
 	Supported DJI remote controllers:  DJI FPV Remote Controller 2

DJI O3 ANTENNA

 	Polarization: Dual-band dual-polarized
 	Weight: Approx. 3g
 	Connector: I-PEX
 	Length: 85 mm




Tips


1. Using DJI Goggles 2 and tested in an outdoor open environment without interference.

2. The 155° FOV is only available when using the 4:3 aspect ratio, and when the video recording specification is at 2.7K@50/60fps or 1080p@50fps/60fps the aspect ratio is 16:9, and the video recording specification is at 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps.

3. 4K/60fps videos do not support the aspect ratio of 4:3, and only support that of 16:9.

4. Sold separately.

5. Compared with DJI FPV Goggles V2 and DJI FPV Remote Controller.




Included


DJI O3 Air Unit Camera Module × 1

DJI O3 Air Unit Transmission Module × 1

DJI O3 Air Unit Antenna × 1

DJI O3 Air Unit 3-in-1 Cable × 1




Compatibility


 	DJI Goggles 2
 	DJI FPV Goggles V2
 	DJI FPV Remote Controller 2

Summary Integrating DJI’s cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent video transmission quality with high definition, low latency, and at long distances. It comes with a 1/1.7-inch sensor, a 155° super-wide FOV, and rich compatibility, providing a powerful video transmission solution for your assembled aircraft. [...]

DJI O3 Air Unit - GEPRC

Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent video transmission quality with high definition and low latency - even at long distances.

#html-body [data-pb-style=D3NTVHC],#html-body [data-pb-style=K7PH1JX],#html-body [data-pb-style=LJ2MQDM],#html-body [data-pb-style=N6BLCV2],#html-body [data-pb-style=NPNTS2U],#html-body [data-pb-style=PL6TWHH],#html-body [data-pb-style=S9RT740],#html




The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!






Introducing the DJI O3 Air Unit














Features


Works with DJI FPV Goggles V2, DJI Goggles 2, and DJI FPV Remote Controller 2
D-Cinelike mode for Vivid Colors
Flagship O3+ Video Streaming
Customizable Canvas Mode
155° Super-Wide FOV
1/1.7-Inch Sensor
Compact in Size












DJI O3 CAMERA


The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent image quality and incredible detail. Thanks to the solutions used, you can easily record a stable 4K/60FPS movie, and the super-wide 155° field of view will allow you to fit much more in the frame! The module is also distinguished by its f/2.8 aperture and 12.7mm equivalent focal length.  It also comes with 20GB of built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32). The features will surprise you!






DJI O3+ FLAGSHIP TRANSMISSION


Transform your video transmission experience. The DJI O3 supports a max video transmission quality of 1080p/100fps from up to 10 km.






SAY GOODBYE TO LIMITATIONS


Get more opportunities. The DJI O3 Air Unit is compatible with the DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long-range, high noise immunity, and low latency. It also works with DJI Goggles 2, which are distinguished by a lighter, smaller design and have built-in micro-OLED screens. The device also works in conjunction with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with Hall effect sticks, and allows you to use the M mode that allows you to perform even extremely complex maneuvers.






CUSTOMIZABLE


The DJI O3 Air Unit features a lightweight, compact design and wide compatibility. This means that you will successfully use it in various configurations. In combination with the DJI Goggles 2 and the DJI FPV Remote Controller 2 apparatus, it will provide you with complete mobility and freedom!






CANVAS MODE


Canvas Mode allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set the PID parameters and configure the system to best suit your habits!





Specifications

DJI O3 AIR UNIT

Live View Quality and End-to-End Latency:

With DJI FPV Goggles V2: 

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.


With DJI Goggles 2: 

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms."




Supported Flight Controller Firmware: Compatible with flight controller firmware that supports Betaflight. For more information, check the product FAQ.
Channels:

Supports auto mode
Supports manual mode: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels


Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
Supported DJI Goggles: DJI Goggles 2 and DJI FPV Goggles V2
Supported DJI Remote Controller: DJI FPV Remote Controller 2
Recommended microSD Cards:

SanDisk Extreme U3 V30 A1 32GB microSDXC
SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
Kingston Canvas Go!Plus U3 V30 A2 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
Samsung PRO Plus U3 V30 A2 256GB microSDXC"


 Weight:

Air Unit (camera module excluded): Approx. 28 g
Air Unit (camera module included): Approx. 36.4 g
Antenna: Approx. 3 g


Operating Temperature: -10º to 40º C (14° to 104° F)
Dimensions:

Transmission Module: 32.5×30.5×14.5 mm
Camera Module: 21.2×20×19.5 mm
Coaxial Cable: 115 mm 
3-in-1 Cable: 100 mm 
Antenna: 85 mm


Supported SD Cards: microSD (up to 256 GB)
Communication Frequency:

2.400-2.4835 GHz (RX only)
5.725-5.850 GHz (RX and TX)


Channels Info:

FCC/SRRC/CE: 
40 MHz:
Channel 1: 5794.5 MHz
20 MHz/10 MHz: 
Channel 1: 5768.5 MHz
Channel 2: 5804.5 MHz
Channel 3: 5839.5 MHz


Transmission Power (EIRP):

FCC: &lt 33 dBm
CE: &lt 14 dBm
SRRC: &lt 30 dBm


Input Voltage: 7.4-26.4 V
Cable: 3-in-1 100mm



DJI O3 CAMERA

Weight: Approx. 8.3 g (coaxial cable included)
Lens:

FOV: 155°
Equivalent Focal Length: 12.7 mm
Focal Length: 2.34 mm
Aperture: f/2.8
Focus Mode: FF
Focus Range: 0.6 m to ∞


Video Resolution:

With DJI Goggles 2: 

4K@50/60fps
2.7K@50/60/100fps
1080p@50/60/100fps


With DJI FPV Goggles V2: 

4K@50/60fps
2.7K@50/60/100/120fps
1080p@50/60/100/120fps




Sensor: 1/1.7-inch CMOS
ISO Range:

100-6400 (Auto)
100-25600 (Manual)


EIS: Supports RockSteady
Shutter: Rolling Shutter
Effective Pixels: 48 MP
Video Format: MP4
FOV: 155°



DJI O3 ANTENNA

Polarization: Dual-band dual-polarized
Weight: Approx. 3g
Connector: I-PEX
Length: 85 mm







IMPORTANT NOTES



The 155° FOV is only available when using the 4:3 aspect ratio, and when the video recording specification is at 2.7K@50/60fps or 1080p@50fps/60fps the aspect ratio is 16:9, and the video recording specification is at 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps.
The 2.4GHz and 5.8GHz frequency bands are supported for receiving, and only the 5.8GHz frequency band is supported for transmitting. Some countries or regions do not support the 5.8 GHz band. Please check local regulations before use and strictly follow them.
Video latency data varies depending on the headset you use. With DJI Goggles 2 at 1080p/100fps video transmission quality, the lowest latency is 30ms. With DJI FPV Goggles V2, at 810p/120fps video transmission quality, the latency does not exceed 28 ms.
Compared to using DJI FPV Goggles V2 and DJI FPV Remote Controller.4K/60fps videos do not support the aspect ratio of 4:3, and only support that of 16:9.

This device is compatible with DJI Goggles 2, DJI FPV Goggles V2, and DJI FPV Remote Controller 2.

4K/60FPS videos only support 16:9 aspect ratio. A 4:3 aspect ratio is not supported.
Video transmission bitrate may vary depending on the operating environment.






Includes


1x DJI O3 Air Unit Transmission Module
1x DJI O3 Air Unit 3-in-1 Cable
1x DJI O3 Air Unit Antenna
1x DJI O3 Air Unit Camera

Recommended Accessories

DJI FPV Goggles 2

DJI FPV Remote Controller 2


Wiring Diagram





The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provid

DJI O3 Air Unit for DJI HD Video System

The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels! Introducing the DJI O3 Air Unit Features Works with DJI FPV Goggles

About this product The DJI O3 Air Unit is finally here! Integrating DJI&#x27s cutting-edge video transmission technology into a lightweight and compact body the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight compact design. See for yourself that it&#x27s possible! The DJI O3 Air

About this product The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight compact design. See for yourself that it's possible! The DJI O3 Air


DJI O3 Air Unit - Go the Distance

State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!


Enjoy flagship video streaming

Get powerful video transmission capabilities - The DJI O3 Air Unit supports DJI's flagship O3+ technology. This allows you to control the drone while enjoying the shortest response time and clear, sharp live feed. The device also has built-in 2T2R Omni-directional antennas, which guarantee greater stability and smoother transmission. Set off on your next adventure in the skies and experience an unforgettable experience!
See Even More
Get an even clearer and smoother live view. The DJI O3 Air Unit can stream video at resolutions up to 1080p, offering frame rates up to 100FPS. H.265 codec. The result is fantastic image quality. With the DJI O3 Air Unit, you will discover a new dimension of sky travel and provide yourself with an unforgettable experience!
Built-in 1080p micro OLED screens
Get even more realism on your next flight. DJI Goggles 2 are equipped with two HD micro OLED screens, which are distinguished by a refresh rate of up to 100Hz and guarantee incredible clarity. Thanks to this, you will feel as if you are actually looking at the world from under the clouds!
Create even greater images
Be amazed by the improved performance of the DJI O3 Air Unit. The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent picture quality and incredible detail Thanks to the solutions used, you can easily record a stable 4K/60FPS movie, and the super-wide 155° field of view will allow you to fit much more in the frame! The module is also distinguished by its f/2.8 aperture and 12.7mm equivalent focal length. Check what else will surprise you!
Enter the world of colors
Vivid, natural colors? Find out how easy it is! Try the D-Cinelike mode and gain more freedom when color grading in post-production. However, the possibilities don't end there! The DJI O3 Air Unit camera module is perfect for use with DJI Avata ND filters (ND8/16/32), which are made of the highest quality materials and allow flexible aperture control. They also allow hassle-free exposure selection. All this translates into natural, faithfully reproduced colors and an interesting contrast between light and shadow.
Customize it
The DJI O3 Air Unit features a lightweight, compact design and wide compatibility. This means that you will successfully use it in various configurations. In combination with the DJI Goggles 2 and the DJI FPV Remote Controller 2 apparatus will provide you with complete mobility and freedom! Moreover, the device supports Canvas mode. This allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set the PID parameters and configure the system to best suit your habits!
Say goodbye to limitations - compatibility with various DJI devices
Get more opportunities. The DJI O3 Air Unit is compatible with the DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long-range, high noise immunity, and low latency. It also works with DJI Goggles 2, which are distinguished by a lighter, smaller design and have built-in micro-OLED screens. The device also works in conjunction with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with Hall effect sticks, and allows you to use the M mode that allows you to perform even extremely complex maneuvers. 
Features:


DJI O3+ Flagship Transmission: Transform your video transmission experience. It supports a max video transmission quality of 1080p/100fps from up to 10 km.

Next-Level Imaging Performance: Equipped with a 1/1.7-inch sensor, the DJI O3 Air Unit can shoot 4K/60fps video with a 155° super-wide FOV, giving you richer image details. It also comes with 20GB of built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32).

Canvas Mode: Canvas Mode lets you customize the OSD information on the screens of DJI Goggles 2 or DJI FPV Goggles V2, and adjust PID parameters.

Compact and Richly Compatible: Packed with richer compatibility in a lightweight body. DJI Goggles 2 and DJI FPV Remote Controller 2 are also smaller in size.


Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent video transmission quality with high definition, low latency, and long distances. It comes with a 1/1.7-inch sensor, a 155° super-wide FOV, and rich compatibility, providing a powerful video transmission solution for your assembled aircraft.


 


 
Specifications:
Camera:


Matrix: 1/1.7" CMOS Effective Pixels: 48MP

Lens: Field of View (FOV): 155° Equivalent Focal Length: 12.7mm Focal Length: 2.34mm Aperture: f/2.8 Focus Mode: FF Focus Range: 0.6m to ∞.

ISO range: 100-6400 (Auto) 100-25600 (Manual)

Snapshot: Roll Shutter

Field of View (FOV): 155°
Video resolution: 

With DJI Goggles 2: 4K @ 50/60FPS 2.7K @ 50/60/100FPS 1080p @ 50/60/100FPS
With DJI FPV Goggles V2: 4K @ 50/60FPS 2.7K @ 50/60/100/120FPS @ 1080p 50/60/100/120FPS


Video Format: MP4

Electronic Image Stabilization (EIS): The product supports RockSteady technology.

Weight: 8.3g (including coaxial cable)

Air Unit Module:


Weight: 

Air Unit (without Camera Unit): Approx. 28g
Air Unit (including Camera Unit): Approx. 36.4g
Antenna: Approx. 3g

Dimensions (L x W x H):

Transmission module: 32.5 x 30.5 x 14.5mm (L x W x H)
Camera module: 21.2 x 20 x 19.5mm (L x W x H)
Coaxial cable: 115mm (length )
3-in-1 cable: 100mm (length)
Antenna: 85mm (length)


Communication frequency:

2.400-2.4835 GHz (RX only)
5.725-5.850 GHz (RX and TX) 


Transmission power (EIRP): FCC: &lt33dBm CE: &lt14dBm SRRC: &lt30dBm
Live view quality and end delay: 

With DJI FPV Goggles V2: 810p/120FPS video transmission quality: less than 28ms latency. 810p/60FPS video streaming quality: less than 40ms latency.
With DJI Goggles 2: 1080p/60FPS video streaming quality: less than 30ms latency. 1080p/60FPS video streaming quality: less than 40ms latency.


Video Transmission Range: 10km (FCC), 2km (CE), 6km (SRRC)

Flight controller software supported: Compatibility with flight controller software that supports Betaflight. Please see the product FAQ for more information.

Input Voltage: 7.4-26.4V

Working temperature: -10°C to 40°C (14°F to 104°F)

Channels: Auto mode support Manual mode support: 40 MHz: 1 channel 20MHz: 3 channels 10MHz: 3channels

Channel information: FCC / SRRC / CE: 40 MHz: Ch 1: 5794.5 MHz 20 MHz / 10 MHz: Ch 1: 5768.5 MHz Ch 2: 5804.5 MHz Ch 3: 5839.5 MHz

Supported SD cards: MicroSD (up to 256GB)
Recommended MicroSD cards: 

SanDisk Extreme U3 V30 A1 32GB microSDXC
SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
Kingston Canvas Go! Plus U3 V30 A2 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
Samsung PRO Plus U3 V30 A2 256GB microSDXC


DJI Goggles supported: DJI Goggles 2 and DJI FPV Goggles V2

Supported DJI remote controllers: DJI FPV Remote Controller 2

Tips

Using DJI Goggles 2 and tested in an outdoor open environment without interference.
The 155° FOV is only available when using the 4:3 aspect ratio, and when the video recording specification is at 2.7K@50/60fps or 1080p@50fps/60fps the aspect ratio is 16:9, and the video recording specification is at 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps.
4K/60fps videos do not support the aspect ratio of 4:3, and only support that of 16:9.

Includes: 

1x DJI O3 Air Unit Camera Module
1x DJI O3 Air Unit Transmission Module
1x DJI O3 Air Unit Antenna
1x DJI O3 Air Unit 3-in-1 Cable

 



DJI O3 Air Unit - Go the Distance State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take yo

DJI O3 Air Unit Kit (w/ camera module & antennas) from WREKD Co.

DJI O3 Air Unit Kit (w/ camera module & antennas)




About this product





The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!






Note: The new DJI O3 Air Unit can draw close to 2A under certain settings. Please verify that your flight controller is capable of 9V / 2A. If not, please consider powering the Air Unit directly from battery +/- on the flight controller or by using a standalone voltage regulator that supplies the required 2A.


Introducing the DJI O3 Air Unit

















Features


Works with DJI FPV Goggles V2, DJI Goggles 2, and DJI FPV Remote Controller 2
D-Cinelike mode for Vivid Colors
Flagship O3+ Video Streaming
Customizable Canvas Mode
155° Super-Wide FOV
1/1.7-Inch Sensor
Compact in Size












DJI O3 CAMERA


The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent image quality and incredible detail. Thanks to the solutions used, you can easily record a stable 4K/60FPS movie, and the super-wide 155° field of view will allow you to fit much more in the frame! The module is also distinguished by its f/2.8 aperture and 12.7mm equivalent focal length.  It also comes with 20GB of built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32). The features will surprise you!






DJI O3+ FLAGSHIP TRANSMISSION


Transform your video transmission experience. The DJI O3 supports a max video transmission quality of 1080p/100fps from up to 10 km.






SAY GOODBYE TO LIMITATIONS


Get more opportunities. The DJI O3 Air Unit is compatible with the DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long-range, high noise immunity, and low latency. It also works with DJI Goggles 2, which are distinguished by a lighter, smaller design and have built-in micro-OLED screens. The device also works in conjunction with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with Hall effect sticks, and allows you to use the M mode that allows you to perform even extremely complex maneuvers.






CUSTOMIZABLE


The DJI O3 Air Unit features a lightweight, compact design and wide compatibility. This means that you will successfully use it in various configurations. In combination with the DJI Goggles 2 and the DJI FPV Remote Controller 2 apparatus, it will provide you with complete mobility and freedom!






CANVAS MODE


Canvas Mode allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set the PID parameters and configure the system to best suit your habits!





Specifications

DJI O3 AIR UNIT

Live View Quality and End-to-End Latency:

With DJI FPV Goggles V2: 

810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.


With DJI Goggles 2: 

1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms."




Supported Flight Controller Firmware: Compatible with flight controller firmware that supports Betaflight. For more information, check the product FAQ.
Channels:

Supports auto mode
Supports manual mode: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels


Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
Supported DJI Goggles: DJI Goggles 2 and DJI FPV Goggles V2
Supported DJI Remote Controller: DJI FPV Remote Controller 2
Recommended microSD Cards:

SanDisk Extreme U3 V30 A1 32GB microSDXC
SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
Kingston Canvas Go!Plus U3 V30 A2 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
Samsung PRO Plus U3 V30 A2 256GB microSDXC"


 Weight:

Air Unit (camera module excluded): Approx. 28 g
Air Unit (camera module included): Approx. 36.4 g
Antenna: Approx. 3 g


Operating Temperature: -10º to 40º C (14° to 104° F)
Dimensions:

Transmission Module: 32.5×30.5×14.5 mm
Camera Module: 21.2×20×19.5 mm
Coaxial Cable: 115 mm 
3-in-1 Cable: 100 mm 
Antenna: 85 mm


Supported SD Cards: microSD (up to 256 GB)
Communication Frequency:

2.400-2.4835 GHz (RX only)
5.725-5.850 GHz (RX and TX)


Channels Info:

FCC/SRRC/CE: 
40 MHz:
Channel 1: 5794.5 MHz
20 MHz/10 MHz: 
Channel 1: 5768.5 MHz
Channel 2: 5804.5 MHz
Channel 3: 5839.5 MHz


Transmission Power (EIRP):

FCC: &lt 33 dBm
CE: &lt 14 dBm
SRRC: &lt 30 dBm


Input Voltage: 7.4-26.4 V
Cable: 3-in-1 100mm



DJI O3 CAMERA

Weight: Approx. 8.3 g (coaxial cable included)
Lens:

FOV: 155°
Equivalent Focal Length: 12.7 mm
Focal Length: 2.34 mm
Aperture: f/2.8
Focus Mode: FF
Focus Range: 0.6 m to ∞


Video Resolution:

With DJI Goggles 2: 

4K@50/60fps
2.7K@50/60/100fps
1080p@50/60/100fps


With DJI FPV Goggles V2: 

4K@50/60fps
2.7K@50/60/100/120fps
1080p@50/60/100/120fps




Sensor: 1/1.7-inch CMOS
ISO Range:

100-6400 (Auto)
100-25600 (Manual)


EIS: Supports RockSteady
Shutter: Rolling Shutter
Effective Pixels: 48 MP
Video Format: MP4
FOV: 155°



DJI O3 ANTENNA

Polarization: Dual-band dual-polarized
Weight: Approx. 3g
Connector: I-PEX
Length: 85 mm







IMPORTANT NOTES



The 155° FOV is only available when using the 4:3 aspect ratio, and when the video recording specification is at 2.7K@50/60fps or 1080p@50fps/60fps the aspect ratio is 16:9, and the video recording specification is at 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps.
The 2.4GHz and 5.8GHz frequency bands are supported for receiving, and only the 5.8GHz frequency band is supported for transmitting. Some countries or regions do not support the 5.8 GHz band. Please check local regulations before use and strictly follow them.
Video latency data varies depending on the headset you use. With DJI Goggles 2 at 1080p/100fps video transmission quality, the lowest latency is 30ms. With DJI FPV Goggles V2, at 810p/120fps video transmission quality, the latency does not exceed 28 ms.
Compared to using DJI FPV Goggles V2 and DJI FPV Remote Controller.4K/60fps videos do not support the aspect ratio of 4:3, and only support that of 16:9.

This device is compatible with DJI Goggles 2, DJI FPV Goggles V2, and DJI FPV Remote Controller 2.

4K/60FPS videos only support 16:9 aspect ratio. A 4:3 aspect ratio is not supported.
Video transmission bitrate may vary depending on the operating environment.






Includes






1x DJI O3 Air Unit Transmission Module
1x DJI O3 Air Unit 3-in-1 Cable
1x DJI O3 Air Unit Antenna
1x DJI O3 Air Unit Camera
















About this product The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 A

DJI's Latest and Greatest FPV Transmission system. View DJI Compatible Drones Here!

DJI O3 Air Unit | Five33

Integrating DJI&#39s cutting-edge video transmission technology in a compact and lightweight body, the DJI O3 Air Unit takes your FPV experience to new heights. Enjoy excellent high-definition video transmission from extended distances with low latency. The O3 Air Unit takes a leap forward in imaging performance with its 1/1.7-inch sensor, 155° super-wide FOV, flagship video technology, and other upgrades. It is also compatible with a wide range of products and delivers a video transmission solution that helps you to fully release your aerial creativity.

DJI O3 Air Unit - RMRC

DJI O3 Air Unit with Camera, Air Unit Module, Antenna

Caddx Polar HD Vista Kit for DJI

Caddx Polar Micro Digital FPV Air Unit Camera Kit is an advanced video transmission module that supports a 5.8GHz digital video signal and 720p 60fps image transmission.

6The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 32 ms.

Caddx Polar Micro Digital FPV Vista Camera Kit

6The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 32 ms. The vista unit can be mounted on a racing drone and used with DJI FPV Goggles or a remote controller to transmit video, control signals, and flight controller information wirelessly!
 
VIDEO: Caddx Polar Starlight Camera Review

Features

Lightweight digital image transmission combination
Stable and clear HD video
720p 60fps, 32ms/4km
8 channels, 8 drones


Specifications

Transmitter Power(EIPP): FCC/SRRC: &lt30dBm CE: &lt14dBm
Max.Transmission Distance: FCC/SRRC:4kmCE:0.7km
Operating Temperature Range: 0°to 40°C（32°to 104°F）
Image Sensor: 1/1.8" Inch 2.3Mega starlight sensor
Supported Flight Control System: BetaFlight
Min.Latency(end-to-end): 720p 60fps&lt32ms
Polar vista kit Weight (Include camera): 28g
Operating Frequency: 5.725-5.850GHz
I/O Interface: USB-C,IPEX,3-in-1 port
FOV: 162°(D) 138°(H) 75°(V)
Min. Illumination: 0.00003Lux
Antenna Weight: 1.5g(IPEX)
Polar cam: 24×19×19mm
Input Power: 7.4-26.4V
Coaxial Cable: 120mm
LENS: F/1.6 &amp 8Mega
Vista: 30×29×13.5mm
Aspect Ratio: 16:9
Antenna: 105mm

Includes 

1x Caddx Polar Micro Digital FPV Vista Camera Kit (Silver or Coffee options)
6x M2 Screws (3/4/5mm)
4x Gasket Ring
1x 3-in-1 Cable


6The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 32 ms. The vista unit can be mounted on a racing drone and used with DJI FPV Goggles o

Antenna Connector

Antennas send signals to and from your VRX/VTX and RX/TX. Many video transmitters and radio receivers come with antennas. Ensure if you need them. Or choose upgrades to increase range and penetration. Select appropriate antennas based on connector, radio frequency, and polarization (if circularly polarized). 

Antennas

RunCam Link Digital FPV Air Unit Lite and Night Eagle HD Camera Kit

RunCam Link Digital FPV Air Unit Night Eagle HD Camera VersionExperience unparalleled FPV performance with the RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version. Designed for drone enthusiasts and racers, this cutting-edge system offers exceptional features and advanced technology to elevate your flying experience.Key Features:8 Channels, 8 Drones:The HDL FPV Transmission system and the FPV Air Unit feature eight frequency channels, allowing up to eight drones to fly simultaneously.Exclusive channels for each operator reduce cross-interference, providing an optimal racing experience.Embedded Remote Controller Receiver:Wireless connectivity to the DJI FPV Remote Controller without additional receivers.Significantly reduces flight preparation time for seamless operation.Small Size, Powerful Performance:Back-illuminated Pixel technology ultra-high sensitivity sensor for exceptional image quality.Starlight black and white image night vision eff...

RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version  - RMRC

RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version 

The RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version delivers high-definition images for an enhanced viewing experience. It offers reliable performance that FPV pilots can depend on. Check out all our Digital VTX/Camera Collection and the rest of our RunCam Products! Specifications: RunCam LINK VTX: Frequ

RunCam Link Digital FPV Air Unit Night Eagle HD Camera Version

DJI O3 Air Unit Transmission Module

                                     DJI O3 Air Unit - Go the Distance

State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it&#39s possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!

Enjoy flagship video streaming



Get powerful video transmission capabilities - The DJI O3 Air Unit supports DJI&#39s flagship O3+ technology. This allows you to control the drone while enjoying the shortest response time and clear, sharp live feed. The device also has built-in 2T2R Omni-directional antennas, which guarantee greater stability and smoother transmission. Set off on your next adventure in the skies and experience an unforgettable experience!
See Even More
Get an even clearer and smoother live view. The DJI O3 Air Unit can stream video at resolutions up to 1080p, offering frame rates up to 100FPS. H.265 codec. The result is fantastic image quality. With the DJI O3 Air Unit, you will discover a new dimension of sky travel and provide yourself with an unforgettable experience! Get even more realism on your next flight. Thanks to this, you will feel as if you are actually looking at the world from under the clouds!
Create even greater images
Be amazed by the improved performance of the DJI O3 Air Unit. The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent picture quality and incredible detail Thanks to the solutions used, you can easily record a stable 4K/60FPS movie, and the super-wide 155° field of view will allow you to fit much more in the frame! The module is also distinguished by its f/2.8 aperture and 12.7mm equivalent focal length. Check what else will surprise you!
Enter the world of colors
Vivid, natural colors? Find out how easy it is! Try the D-Cinelike mode and gain more freedom when color grading in post-production. However, the possibilities don&#39t end there! The DJI O3 Air Unit camera module is perfect for use with DJI Avata ND filters (ND8/16/32), which are made of the highest quality materials and allow flexible aperture control. They also allow hassle-free exposure selection. All this translates into natural, faithfully reproduced colors and an interesting contrast between light and shadow.
Customize it
The DJI O3 Air Unit features a lightweight, compact design and wide compatibility. This means that you will successfully use it in various configurations. In combination with the DJI Goggles 2 and the DJI FPV Remote Controller 2 apparatus will provide you with complete mobility and freedom! Moreover, the device supports Canvas mode. This allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set the PID parameters and configure the system to best suit your habits!
Say goodbye to limitations - compatibility with various DJI devices
Get more opportunities. The DJI O3 Air Unit is compatible with the DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long-range, high noise immunity, and low latency. It also works with DJI Goggles 2, which are distinguished by a lighter, smaller design and have built-in micro-OLED screens. The device also works in conjunction with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with Hall effect sticks, and allows you to use the M mode that allows you to perform even extremely complex maneuvers. 
Features:


DJI O3+ Flagship Transmission: Transform your video transmission experience. It supports a max video transmission quality of 1080p/100fps from up to 10 km.

Next-Level Imaging Performance: Equipped with a 1/1.7-inch sensor, the DJI O3 Air Unit can shoot 4K/60fps video with a 155° super-wide FOV, giving you richer image details. It also comes with 20GB of built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32).

Canvas Mode: Canvas Mode lets you customize the OSD information on the screens of DJI Goggles 2 or DJI FPV Goggles V2, and adjust PID parameters.

Compact and Richly Compatible: Packed with richer compatibility in a lightweight body. DJI Goggles 2 and DJI FPV Remote Controller 2 are also smaller in size.


Integrating DJI&#39s cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent ..

                                     DJI O3 Air Unit - Go the Distance State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low late

DJI O3 Air Unit Transmission Module (VTX Only) from WREKD Co.

DJI O3 Air Unit Transmission Module (VTX Only)

The DJI O3 Air Unit Transmission Module will take your FPV experience to a whole new level all in a lightweight and compact design!

#html-body [data-pb-style=HKVRIEY],#html-body [data-pb-style=JGV9V9M],#html-body [data-pb-style=NCTFE9L],#html-body [data-pb-style=NXGXBCN],#html-body [data-pb-style=U9QRIEL]{justify-content:flex-start;display:flex;flex-direction:column;background-po

DJI O3 Air Unit Transmission Module 

About this product






The DJI O3 Air Unit Transmission Module will take your FPV experience to a whole new level all in a lightweight and compact design! Supports Betaflight, auto mode, manual mode: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels, microSD








Note: The new DJI O3 Air Unit can draw close to 2A under certain settings. Please verify that your flight controller is capable of 9V / 2A. If not, please consider powering the Air Unit directly from battery +/- on the flight controller or by using a standalone voltage regulator that supplies the required 2A.









Features


 	Compatible with flight controller firmware that supports Betaflight.
 	Supports auto mode / Supports manual mode: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels
 	Supported SD Cards: microSD (up to 256 GB)
 	Lightweight and compact in size











Specifications


 	 Live View Quality and End-to-End Latency:

 	With DJI FPV Goggles V2:

 	810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
 	810p/60fps Video Transmission Quality: The latency is lower than 40 ms.


 	With DJI Goggles 2:

 	1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
 	1080p/60fps Video Transmission Quality: The latency is as low as 40 ms."




 	Supported Flight Controller Firmware: Compatible with flight controller firmware that supports Betaflight. For more information, check the product FAQ.
 	Channels:

 	Supports auto mode
 	Supports manual mode: 40 MHz: 1 channel 20 MHz: 3 channels 10 MHz: 3 channels


 	Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
 	Supported DJI Goggles: DJI Goggles 2 and DJI FPV Goggles V2
 	Supported DJI Remote Controller: DJI FPV Remote Controller 2
 	Recommended microSD Cards:SanDisk Extreme U3 V30 A1 32GB microSDXC

 	SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
 	Kingston Canvas Go!Plus U3 V30 A2 64GB microSDXC
 	Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
 	Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
 	Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
 	Samsung PRO Plus U3 V30 A2 256GB microSDXC"


 	Weight:

 	Air Unit (camera module excluded): Approx. 28 g
 	Air Unit (camera module included): Approx. 36.4 g
 	Antenna: Approx. 3 g


 	Operating Temperature: -10º to 40º C (14° to 104° F)
 	Dimensions:

 	Transmission Module: 32.5×30.5×14.5 mm
 	Camera Module: 21.2×20×19.5 mm
 	Coaxial Cable: 115 mm
 	3-in-1 Cable: 100 mm
 	Antenna: 85 mm


 	Supported SD Cards: microSD (up to 256 GB)
 	Communication Frequency:

 	2.400-2.4835 GHz (RX only)
 	5.725-5.850 GHz (RX and TX)


 	Channels Info:

 	FCC/SRRC/CE:
 	40 MHz:
 	Channel 1: 5794.5 MHz
 	20 MHz/10 MHz:
 	Channel 1: 5768.5 MHz
 	Channel 2: 5804.5 MHz
 	Channel 3: 5839.5 MHz


 	Transmission Power (EIRP):

 	FCC: &amplt 33 dBm
 	CE: &amplt 14 dBm
 	SRRC: &amplt 30 dBm


 	Input Voltage: 7.4-26.4 V
 	Cable: 3-in-1 100mm








IMPORTANT NOTES




 	The 2.4GHz and 5.8GHz frequency bands are supported for receiving, and only the 5.8GHz frequency band is supported for transmitting. Some countries or regions do not support the 5.8 GHz band. Please check local regulations before use and strictly follow them.
 	This device is compatible with DJI Goggles 2, DJI FPV Goggles V2, and DJI FPV Remote Controller 2.
 	Video transmission bitrate may vary depending on the operating environment.











Includes


 	1x DJI O3 Air Unit Transmission Module

DJI O3 Air Unit Transmission Module | Five33

Caddx Naked Vista Kit for DJI

Flywoo

Save 10g of weight in your builds by using a Naked Vista kit!

Save 10g of weight in your builds by using a Naked Vista kit!
Some recent cinewhoops have come installed naked vistas to save weight. Especially useful for small lightweight builds. There are risks involved, as the heatsink is included by default fo

Caddx Naked Vista Unit w/ DJI FPV Camera

The Caddx Polar Nano Starlight Camera Naked Vista Kit is a low-light camera with a 1/1.8" digital starlight sensor and Caddx Vista Unit. This naked version comes without the heatsink casing attached, eliminating about 10g of weight.

Caddx Naked Vista Unit w/ Polar Nano Camera

Caddx Naked Vista Unit w/ Polar Camera

FLYWOO

The Caddx Polar Nano Starlight Camera Naked Vista Kit is a low-light camera with a 1/1.8&quot digital starlight sensor and Caddx Vista Unit. This camera has low-latency HD image transmission video recorded through the DJI FPV Goggles. Perfect for your nano builds with its ultralight features... including the new 1.5g light

The Caddx Polar Nano Starlight Camera Naked Vista Kit is a low-light camera with a 1/1.8" digital starlight sensor and Caddx Vista Unit. This camera has low-latency HD image transmission video recorded through the DJI FPV Goggles. Perfect for your nano builds with its ultralight features... including the new 1.5g light

Naked Caddx Polar Nano Digital HD Kit for DJI Black 8cm

Naked Caddx Polar Nano Digital HD Kit for DJI  Black 8cm

 Save 10g of weight in your builds by using a Naked Vista kit! Some recent cinewhoops have come installed naked vistas to save weight. Especially useful for small lightweight builds. There are risks involved, as the heatsink is included by default for a reason! You must remember to fly right as you power on, or risk ov

<p>Save 10g of weight in your builds by using a Naked Vista kit!</p>
<p>Some recent cinewhoops have come installed naked vistas to save weight. Especially useful for small lightweight builds. There are risks involved, as the heatsi

Caddx Naked Vista Unit w/ Nebula Pro Camera

The Caddx Nebula Pro Nano Naked Vista Kit is a 720p/120fps digital kit !  Note: 1、 Naked vista has been activated and upgraded to the latest version in order to avoid damage caused by upgrade failure. So you don&#x27t need to upgrade again.  2、 Removal of the heat sink eliminates weight but may cause overheating of the uni

The Caddx Nebula Pro Nano Naked Vista Kit is a 720p/120fps digital kit !  Note: 1、 Naked vista has been activated and upgraded to the latest version in order to avoid damage caused by upgrade failure. So you don't need to upgrade again.  2、 Removal of the heat sink eliminates weight but may cause overheating of the uni

Naked Caddx Nebula Pro Nano Digital HD VTX Kit for DJI Black 8cm

Naked Caddx Nebula Pro Nano Digital HD VTX Kit for DJI  Black 8cm

Save 10g of weight in your builds by using a Naked Vista kit! Some recent cinewhoops have come installed naked vistas to save weight. Especially useful for small lightweight builds. There are risks involved, as the heatsink is included by default for a reason! You must remember to fly right as you power on, or risk ove

Caddx Nebula Pro Nano Vista Kit for DJI

The Caddx Nebula Pro 720p/120fps performance and low 28ms latency!
Features

Lighter than the Air Unit, better suited for micro applications
Low latency mode offers 120FPS at &lt28 ms!
Embedded Receiver for DJI Remote Controller 


Specifications

Coaxial Cable Length: 12cm

Nebula Pro Camera

Image sensor: 1/3 inch CMOS sensor
Resolution: 720p/120fps
Image: 4:3&amp16:9 (Switchable)
FPV/Recording FOV: 150°
Lens: 2.1mm f/2.1
FPV Latency: &lt28ms
Work Temperature: -20℃~+60℃
Weight: 6g(N.W.), 20g (G.W.)
Dimension: 19*19*20mm
Shutter: Rolling Shutter

Vista Module

Input Voltage: 7.4-26.4V

Output Power: 25mW / 200mW / 500mW / 700mW
Dimensions:

Vista: 30x29x13mm
Camera: 24x19x19mm
Coaxial Cable: 120mm
Antenna: 105x11.2mm

Weight: 28g (+1.5g for Antenna)


Includes

1x Nebula Pro Camera
1x Vista Module 
1x Antenna (U.FL)


The Caddx Nebula Pro 720p/120fps performance and low 28ms latency! Features Lighter than the Air Unit, better suited for micro applications Low latency mode offers 120FPS at &lt;28 ms! Embedded Receiver for DJI Remote Controller Specifications Coaxial Cable Length: 12cm Nebula Pro Camera Image sensor: 1/3 inch CMOS sen

Vista VTX with Nebula Pro Camera For DJI HD Video System

The Caddx Nebula Pro 720p/120fps performance and low 28ms latency!
Features

Lighter than the Air Unit, better suited for micro applications
Low latency mode offers 120FPS at &lt;28 ms!
Embedded Receiver for DJI Remote Controller 


Specifications

Coaxial Cable Length: 12cm

Nebula Pro Camera

Image sensor: 1/3 inch CMOS sensor
Resolution: 720p/120fps
Image: 4:3&amp;16:9 (Switchable)
FPV/Recording FOV: 150°
Lens: 2.1mm f/2.1
FPV Latency: &lt;28ms
Work Temperature: -20℃~+60℃
Weight: 6g(N.W.), 20g (G.W.)
Dimension: 19*19*20mm
Shutter: Rolling Shutter

Vista Module

Input Voltage: 7.4-26.4V

Output Power: 25mW / 200mW / 500mW / 700mW
Dimensions:

Vista: 30x29x13mm
Camera: 24x19x19mm
Coaxial Cable: 120mm
Antenna: 105x11.2mm

Weight: 28g (+1.5g for Antenna)


Includes

1x Nebula Pro Camera
1x Vista Module 
1x Antenna (U.FL)
