FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

TBS Unify Pro 5G8 V3 - SMA

Team BlackSheep

A video transmitter just for racers. 5g weight, 25 - 800mW output power (user adjustable). Cutting weight and flying far has never been this easy and affordable.Antenna Connector: SMA Female Socket


This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to f

TBS Unify Pro 5G8 V3 (SMA)






This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs off a filtered 5V power supply, so it's perfect when being connected to a TBS CORE PRO or TBS PowerCube (*)
New in V3:

Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax. on V3

Main features

Smallest, lightest video transmitter on the market
Up to 800mW of output power
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without antenna for hours!
Clean powerup and video switching
CE certified

PitMode - Made to race
Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. 
SmartAudio V2 - Full control
SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!
CleanSwitch - Neighbor friendly
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)
Say NO! to Dipswitches
Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 
Specifications

Operating Voltage: 4.5 - 5.5V
Supply current: 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 5g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)

Included

TBS UNIFY 5G8 Video transmitter
5V Video Transmitter pigtail cable
TBS UNIFY Pro Manual
CE Certification
Declaration of Conformity

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.






FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

TBS Unify Pro 5G8 V3 (SMA) This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other me

TBS Unify Pro 5G8 V3 (SMA) DroneRacingParts.com

This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs off a filtered 5V power supply, so it's perfect when being connected to a TBS CORE PRO or TBS PowerCube.
New in V3: Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax.
Check out the rest of out TBS Products and all our VTXs!
Features

Smallest, lightest video transmitter on the market
Up to 800mW of output power
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without antenna for hours!
Clean powerup and video switching
CE certified

PitMode - Made to raceZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SmartAudio V2 - Full controlSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!CleanSwitch - Neighbor friendlyCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)Say NO! to DipswitchesEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies.
Specifications

Operating Voltage: 4.5 - 5.5V
Supply current: 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 5g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW)

Includes

1x TBS Unify Pro V3 25-800mW 5.8GHz VTX - SMA
1x 5V Video Transmitter pigtail cable


This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs 

TBS Unify Pro V3 25-800mW 5.8GHz VTX - SMA

VTX Frequency

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.

Video Transmitters

VTX Stack Mount

VTX Antenna Connector

Max Transmission Power

Digital / Analog VTX

FPV Camera Included

TBS Unify Pro HV 25-800mW 5.8GHz VTX - SMA

The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements while giving you the best possible picture. With only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices.
Check out the rest of out TBS Products and all our VTXs!
Features
Pitmode - Made to RaceZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SmartAudio - Full ControlSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels, and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external Bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in the air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!CleanSwitch - Neighbor FriendlyCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)Say no! to DipswitchesEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies.
Specifications

Operating Voltage: 2S - 6S
Supply current: up to 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 7g (with SMA, without antenna)
Input Connector: JST GH 7pin (after July 2018)
Antenna Connector: SMA Female Socket with screw mounting holes
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW)

Includes
1x TBS Unify Pro HV 25-800mW 5.8GHz VTX - SMA1x 7Pin Video Transmitter pigtail cable1x TBS UNIFY Pro Manual

The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand n

TBS Unify Pro HV Race 25-200mW 5.8GHz VTX - SMA

he newly refreshed Unify is here! The U.FL connector now has screws over a tiny plate to hold it in place. The connections have changed to add an additional ground and data pin to allow you to wire audio and SmartAudio separately.Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard") down to a bare minimum for FPV racing, at a very attractive price.
Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.
Features

Smallest, lightest video transmitter on the market
2-6S input power supported
25mW / 200mW power settings
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without an antenna for hours!
Clean powerup and video switching
CE certified
SmartAudio is now split into Audio = Audio and Data = SmartAudio

PITMODE - MADE TO RACEZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. SMARTAUDIO V2 - FULL CONTROLSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels, and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external Bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in the air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility.CLEANSWITCH - NEIGHBOR FRIENDLYCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS.SAY NO! TO DIPSWITCHESEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 
Specifications

Operating Voltage: 2S - 6S
Supply current: 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 7g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes, U.FL to VTx
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW)

TBS UNIFY Pro Manual
Includes

1x TBS Unify Pro HV Race 25-200mW 5.8GHz VTX - SMA


he newly refreshed Unify is here! The U.FL connector now has screws over a tiny plate to hold it in place. The connections have changed to add an additional ground and data pin to allow you to wire audio and SmartAudio separately.Distilling the smallest, lightest and most powerful video transmitters (aka "the golden st

Walksnail

Walksnail Avatar HD Kit V2 VTX Kit - Micro Camera V2, Dual Antenna Version

WALKSNAIL

Walksnail Avatar HD Kit V2 (Dual Antennas Version)

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

Walksnail Avatar HD Kit V2 (Dual Antennas Version) - RMRC

CADDX

Lightweight design, ultra-thin experience 
The Walksnail Avatar VRX Kit Combo is only 83g and comes with 114x55x22mm a size easy to carry.


Walksnail VRX adopts a 4-antenna design. 2 directional antennas and the maximum transmission distance is 4km

1080P/60FPSWalksnail VRX adopts industry-leading H.265 encoding technology,which can provide a minimum delay of 22ms and a maximum resolution of 1080p.The HD picture quality takes you to experience the fun of flying a drone.

HDMI output ensures you enjoy uncompressed audio and video signals from the Walksnail HD system

Canvas ModeSupports Betaflight, INAV, and KISS with full OSD. You can easily adjust the parameters you want by remote control.

Specification 

Camera: 

Model Avatar nano/Avatar camera
Image Sensor: 1/2.7”1nch
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 16/9 4/3
Lens: 2.1mm
FOV: 170°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 3.5g/6g
Dimensions: 14x14x17mm/19x19x22mm
Coaxial Cable: 90mm/140mm

VTX:

Model: Avatar V2 module(Dual Antenna)
Communication Frequency: 725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar HD VRX

Model Avatar HD VRX
CommunicationFrequency: 5.725-5.850GHz
TransmitterPower: (EIRP) FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBmMIC:&lt25dBm
I/O Interface: HDMI, micro SD card slot, DC5.5x2.1mm
HDMI output: 1080p/60fps, 720p/100fps, 720p/60fps
Power Input: 7-21V(2S-5S)
SD Card Support:256G
System: Avatar HD system


Includes:

 Avatar VRX: (or buy alone)

RedBirdAntenna x2
HDMI cable x1
2-in-1 DCPowerCable x1

Avatar Micro V2 HD Kit (Dual Antenna Version): (or buy alone) 

1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x M2x14mm screws
4x M2x5x0.5mm gasket


Lightweight design, ultra-thin experience  The Walksnail Avatar VRX Kit Combo is only 83g and comes with 114x55x22mm; a size easy to carry. Walksnail VRX adopts a 4-antenna design. 2 directional antennas and the maximum transmission distance is 4km 1080P/60FPSWalksnail VRX adopts industry-leading H.265 encoding technol

Walksnail Avatar HD V2 VTX Micro Kit Combo - (Dual Antenna Version)

This Walksnail Digital HD VTX / Micro Camera Kit V2 is designed for use with Walksnail Avatar/Fatshark Dominator HD FPV systems. It features H.265 encoding to provide 1080p FPV image quality with ultra-low latency and 2K pixels, 4:3 native sensor for improved image quality. The kit also supports Gyroflow for smoother, 

Walksnail Avatar HD Kit V2 Dual Antennas Version 32G with Camera V2+Gyroflow for Walksnail Avatar/Fatshark Dominator HD FPV System

Walksnail Avatar HD Kit V2 (Dual Antennas Version) Features Dual antennas Compatible 4K 1080P 120fps compatibility 22ms low latency Ranging Mode 4KM range Light weight design FOV160° Built-in 32G storage,  Support Gyroflow 6V-25.2V The only native 4:3 high-definition sensor in the FPV industry Bullet Points for Walksna

Walksnail Avatar HD Kit V2 (Dual Antennas Version) – CADDX FPV

Walksnail Avatar HD Kit V2 (Dual Antennas Version)

Features


Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Light weight design
FOV160°
Built-in 32G s

Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. Camera V2 delivers 2K pixels, a 4:3 native sensor for enhanced visuals, and a native 4:3 mode ratio so you can capture more of your surroundings in stunning detail. This kit includes the new VTX and camera, coming with 2 antennas.

Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Lightweight design
FOV160°
Built-in 32G storage, 
Support Gyroflow
6V-25.2V
The only native 4:3 high-definition sensor in the FPV industry







The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. Meanwhile, it's a better fit for regular FPV races as well.

 

The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.   
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes.




New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate. 



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.


Specification
Camera

Model: Avatar V2 camera

Image Sensor: 1/3.2-Inch 4Mp 4:3sensor

Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility
1080P/100fps compatibility 

Ratio: 4:3 native /16:9

Lens: 2.1mm

FOV: 160°

Aperture: F2.0

Shutter: Rolling shutter

Min.Illumination: 0.001Lux

Weight: 7.2g

Dimensions: 19x19x22mm

Coaxial Cable: 140mm

Gyroflow: Only 32G VTX Supported

VTX



Model: Avatar V2 module(Dual Antenna)
Communication Frequency: 725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 antenna 

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm （without cable）
Weight: 2g

Includes

1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x M2x14mm screws
4x M2x5x0.5mm gasket






Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna

Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)

Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - 

Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. Camera V2 delivers 2K pixels, a 4:3 native sensor for enhanced visuals, and a native 4:3 mode ratio so you can capture more of your surroundings in stunning detail. This kit includes the new VTX and camera, coming with 2 antennas.

Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

Dual antennas
Compatible 4K
1080P 120fps compatibility
22ms low latency
Ranging Mode
4KM range
Lightweight design
FOV160°
Built-in 32G storage, 
Support Gyroflow
6V-25.2V
The only native 4:3 high-definition sensor in the FPV industry







The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. Meanwhile, it&#39s a better fit for regular FPV races as well.

 

The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.   
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes.




New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate. 



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.


Specification
Camera

Model: Avatar V2 camera

Image Sensor: 1/3.2-Inch 4Mp 4:3sensor

Resolution: 1080P/60fps 720P/100fps 720P/60fps1080P/120fps compatibility
1080P/100fps compatibility 

Ratio: 4:3 native /16:9

Lens: 2.1mm

FOV: 160°

Aperture: F2.0

Shutter: Rolling shutter

Min.Illumination: 0.001Lux

Weight: 7.2g

Dimensions: 19x19x22mm

Coaxial Cable: 140mm

Gyroflow: Only 32G VTX Supported

VTX



Model: Avatar V2 module(Dual Antenna)
Communication Frequency: 725-5.850GHz
Transmitter Power (EIRP): FCC:&amplt30dBmCE:&amplt14dBmSRRC:&amplt20dBm MIC:&amplt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight Inav Fettec ArduPilot Kiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 antenna 

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm （without cable）
Weight: 2g

Includes

1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x M2x14mm screws
4x M2x5x0.5mm gasket






Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version) from WREKD Co.

Experience FPV like never before with the Walksnail Avatar HD Kit V2 with dual antennas.

#html-body [data-pb-style=PCAM30S]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=PWSDHNQ]{display:no

Walksnail Avatar HD Kit V2 - 32GB + Gyro w/ Dual Antennas

TBS Unify EVO 5.8GHz Video Transmitter

TBS knows video transmitters, and their latest creation merges the best qualities of multiple VTX's into one. The Unify EVO aims to satisfy the video needs of every pilot!

TBS knows video transmitters, and their latest creation merges the best qualities of multiple VTX's into one. The Unify EVO aims to satisfy the video needs of every pilot!
The EVO comes with a built-in graphical OSD and microphone, talks all the pro

Introducing the latest technology in TBS video transmitters! It comes with a built-in graphical OSD and microphone, talks all the protocols and transmits all the power levels! This makes it a perfect companion for any situation where you don't have any OSD, or want to benefit from the simplicity and clarity that the TB

TBS Unify Evo VTX

The EVO comes with a built-in graphical OSD and microphone, talks all the protocols and transmits all the power levels! This makes it a perfect companion for any situation where you don't have any OSD, or want to benefit from the simplicity and clarity that the TBS OSD is known for.
Check out the rest of out TBS Products and all our VTXs!
Features
THE SWISS ARMY KNIFE OF VIDEO TRANSMITTERSWe packed all the features that we could into the smallest form factor possible. When we set out to make this video transmitter we were looking to make something that would fit all use cases for analog video transmitters ever envisioned. Long range, racing, freestyle, wings, cars. You name it, the VTx will shine in this application! More features are still under development and they can be loaded via the TBS AgentX with the onboard USB port.BARCODES? BARCODES!! (PATENT PENDING)The VTx is capable of processing the camera image. So we taught it to read barcodes! This means the VTx no longer needs to be transmitting to set channels, and setting channels can be done in the pits. It also means no more guesswork what channel the VTx is on, simply point it at the barcode of your choice and it will move to that channel or power level! There are many more exciting features coming with this technology, stay tuned and barcode on!CRSF, SMARTAUDIO 2.1, PWM, PITMODECRSF is the defacto standard in FPV and racing drones, so it makes sense that this video transmitter can both understand as well as speak CRSF. For compatibility, the VTx also speaks SA 2.1 and has the teamrace-friendly pitmode feature. PWM controls allow you to use the VTx with any radio and product. For example, you may have it on your R/C cars, R/C motorcycles or other devices that don't have flight controllers or Crossfire and control the VTx button with a switch or button you have on the radio.

Specifications

Operating Voltage: 6V - 26V (2S - 6S)
Supply current: (25mW) ~ 0.11A | (100mW) ~ 0.13A | (400mW) ~ 0.18A | (full power) ~ 0.24A
Operating Temperature: watch for normal airflow
Video Input Impedance: 75 Ohm
Weight: 7g
Dimensions: 30 x 23 x 5.5mm
Antenna Connector: u.FL socket
Video Format: NTSC/PAL
Audio: Microphone included
Output Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 29dBm (800mW)

Includes

1x TBS UNIFY EVO 5G8 Video transmitter
1x u.FL pigtail SMA
1x Power, Camera and CRSF cables

Wiring Diagram


The EVO comes with a built-in graphical OSD and microphone, talks all the protocols and transmits all the power levels! This makes it a perfect companion for any situation where you don't have any OSD, or want to benefit from the simplicity and clarity that the TBS OSD is known for. Check out the rest of out TBS Produc

TBS Unify EVO 25-800mW 5.8GHz VTX - SMA

Happymodel

Happymodel Diamond 25x25 25-200mW 5.8GHz VTX w/DVR for Mobula7 - U.FL

HAPPYMODEL

Upgrade your whoop with a solid VTX with a DVR built in.
Pair this with one of our whoop flight controllers, and check out the rest of our Happymodel offerings.

Features


Built-in DVR(Video size 1280×720)
Upgrade for Moubla7 (Recommended parts to fit the Diamond VTX Happymodel Mobula7 V2 canopy CADDX EOS2 camera Runcam Nano2 camera)
Short touch the button to Start/Stop Video recorder
The video will split to 2 minutes automatically
Small size , lighter only 3gram and easy to mount in a regular whoop
Auto start when power on
Note: Auto-save when Power off is not support, please remember to press the stop button after landing

 



Specifications


Brand Name: Happymodel
Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 4.8v~5.5v
Current consumption: 250mA~510mA(type)
Antenna: RG178 antenna
U.FL interface
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready
Weight: 3g without antenna
Video Output Size: VGA (640×480)
Video Output format: NTSC
Record video size : 1280×720 @25FPS
TF Card support: Max.32G
Interface: JST SH1.0 3pin for Camera
JST SH1.0 5pin for Connect with F3/F4 Flight controller
Compress Format: AVI

 
Includes

1x  HappyModel Diamond Whoop 25-200mW 5.8GHz VTX w/ DVR for Mobula 7 - U.FL
1x JST SH1.0 3Pin wire for camera 
1x JST SH1.0 5Pin wire for flight controller 

Wiring
 manual download


Wiring




The world’s first AIO 5in1 F4 flight controller with integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrates SPI controlled 2.4GHz ExpressLRS receiver, Dshot protocol 4-in-1 ESC, 5.8GHz 40ch video transmitter and Betaflight OSD. Ultra-small size and ultra-stable remote control range can improve the range of the original SPI receiver. And because the 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate and low latency, this flight controller is the one that all Race/Freestyle pilots needed. It is suitable for use in Tiny whoop Race or Toothpick Freestyle, and can also be used in 1S ultra-lightweight Nano Long Range platform.

HappyModel Diamond Whoop 25-200mW 5.8GHz VTX w/ DVR for Mobula 7 - U.FL

HappyModel ELRS 2G4 Whoop Flight Controller - For Sale At RaceDayQuads

Specifications: Brand Name: Happymodel Output power: 25~200mw switchableFrequency: 37CHInput voltage: 3.3V 5.5VCurrent consumption: 250mA~510mA(type)Antenna: RG178 antenna U.FL interfaceFrequency: 5.8GHz 5bands 37 channelsWith RacebandSmartaudio readyWeight: 3g without antenna Video Output Size: VGA (640×480) Video Out

Happymodel Diamond VTX 5.8G 37ch 25mw-200mw Switchable VTX with DVR

Walksnail Avatar HD V2 VTX Module - Dual Antenna Version

The Walksnail Avatar HD VTX V2 is a versatile VTX module compatible with dual antennas. 

#html-body [data-pb-style=EW921O8]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=NKXHXPT]{display:no

Walksnail Avatar HD VTX V2 Module - 32GB Dual Antennas Version

<div style="text-align: center" data-mce-fragment="1" data-mce-style="text-align: center">
<h3 style="text-align: left" data-mce-style="text-align: left">Bullet Points：<br>
</h3>
</div>
<div data-mce-fragment="1" data-mce-style="text-align: center">
<ul>
<li>The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.</li>
<li>Updated the design of PCB board and shell, improved the quality of VTX, more durable.</li>
<li>Optimized the installation place of the antenna, it's better to protect the VTX.</li>
<li>The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.</li>
<li>The kit includes a spare power pad, providing an extra opportunity for welding.</li>
</ul>
</div>
<div data-mce-fragment="1" data-mce-style="text-align: center">
<div style="text-align: left" data-mce-style="text-align: left"><img alt="" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/5_a74bf4a9-87aa-4ca8-bc05-0c352e5b4676.jpg?v=1697782652"></div>
</div>
<div style="text-align: center" data-mce-fragment="1" data-mce-style="text-align: center">
<div style="text-align: left" data-mce-style="text-align: left">
<div style="text-align: left" data-mce-fragment="1" data-mce-style="text-align: left">
<ul>
<li>The Avatar VTX comes with 32g built-in storage it can record 1080P or 720P HD fly videos without interference. 32G built-in storage, recording video time increased by 4 times.</li>
</ul>
<p><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/7_a3368129-fde3-4c9c-9bea-7832b77c11f7.jpg?v=1695276608" style="float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/7_a3368129-fde3-4c9c-9bea-7832b77c11f7.jpg?v=1695276608" data-mce-style="float: none"></p>
</div>
</div>
<div style="text-align: center" data-mce-style="text-align: center">
<div style="text-align: center" data-mce-style="text-align: center">
<div style="text-align: left" data-mce-style="text-align: left">
<article data-identifier-application__slash__x-doc-key="v1GXn4x3DLeonDQ4" data-identifier-application__slash__x-cangjie-fragment="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" data-clipboard-cangjie='["root",{"copyFrom":1329378339},["p",{"uuid":"lei4y6iyyt3vq4ejxk","ind":{"left":0},"list":{"listId":"y6t50qxp2xn","level":0,"isOrdered":false,"isTaskList":false,"isChecked":false,"listStyleType":"SCIR_ECIR_SREC","symbolStyle":{"shd":"#FFFFFF"},"listStyle":{"format":"bullet","text":"●","align":"left"},"hideSymbol":false,"extraData":{}}},["span",{"data-type":"text"},["span",{"highlight":"#FFFFFF","data-type":"leaf"},"TVS added, up to 8S"]]]]'>
<ul>
<li>New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.</li>
</ul>
</article>
<article data-identifier-application__slash__x-doc-key="v1GXn4x3DLeonDQ4" data-identifier-application__slash__x-cangjie-fragment="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" data-clipboard-cangjie='["root",{"copyFrom":1329378339},["p",{"uuid":"lei4y6iyyt3vq4ejxk","ind":{"left":0},"list":{"listId":"y6t50qxp2xn","level":0,"isOrdered":false,"isTaskList":false,"isChecked":false,"listStyleType":"SCIR_ECIR_SREC","symbolStyle":{"shd":"#FFFFFF"},"listStyle":{"format":"bullet","text":"●","align":"left"},"hideSymbol":false,"extraData":{}}},["span",{"data-type":"text"},["span",{"highlight":"#FFFFFF","data-type":"leaf"},"TVS added, up to 8S"]]]]'><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/6_290966f5-24c6-4f62-a7be-716aaca90ffd.jpg?v=1695276215" style="margin-bottom: 16px float: none" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/6_290966f5-24c6-4f62-a7be-716aaca90ffd.jpg?v=1695276215" data-mce-style="margin-bottom: 16px float: none"></article>
<article data-identifier-application__slash__x-doc-key="v1GXn4x3DLeonDQ4" data-identifier-application__slash__x-cangjie-fragment="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" data-clipboard-cangjie='["root",{"copyFrom":1329378339},["p",{"uuid":"lei4y6iyyt3vq4ejxk","ind":{"left":0},"list":{"listId":"y6t50qxp2xn","level":0,"isOrdered":false,"isTaskList":false,"isChecked":false,"listStyleType":"SCIR_ECIR_SREC","symbolStyle":{"shd":"#FFFFFF"},"listStyle":{"format":"bullet","text":"●","align":"left"},"hideSymbol":false,"extraData":{}}},["span",{"data-type":"text"},["span",{"highlight":"#FFFFFF","data-type":"leaf"},"TVS added, up to 8S"]]]]'></article>
</div>
<div style="text-align: center" data-mce-style="text-align: center">
<table width="100%">
<tbody>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left"><strong>Specification</strong></td>
<td style="text-align: left" data-mce-style="text-align: left"></td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left"><strong>VTX</strong></td>
<td style="text-align: left" data-mce-style="text-align: left"> </td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Model</td>
<td style="text-align: left" data-mce-style="text-align: left">Avatar V2 module(Dual Antenna)</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Communication Frequency</td>
<td style="text-align: left" data-mce-style="text-align: left">5.725-5.850GHz</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Transmitter Power (EIRP)</td>
<td style="text-align: left" data-mce-style="text-align: left">FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">1/O Interface</td>
<td style="text-align: left" data-mce-style="text-align: left">JST1.0*4(Power in)JST0.8*6(USB)</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Mounting Holes</td>
<td style="text-align: left" data-mce-style="text-align: left">25.5*25.5mm 20*20mm</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Dimensions</td>
<td style="text-align: left" data-mce-style="text-align: left">33*33*<span style="color: #000000" data-mce-style="color: #000000">10.5</span>mm</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Storage</td>
<td style="text-align: left" data-mce-style="text-align: left">32G</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Recording</td>
<td style="text-align: left" data-mce-style="text-align: left">1080P/720P</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Weight</td>
<td style="text-align: left" data-mce-style="text-align: left">15.4g<br>
</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Operating Temperature</td>
<td style="text-align: left" data-mce-style="text-align: left">-20-40℃</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Channels</td>
<td style="text-align: left" data-mce-style="text-align: left">8</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Wide Power Input</td>
<td style="text-align: left" data-mce-style="text-align: left">6V-<span style="color: #000000" data-mce-style="color: #000000">25.2</span>V</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Supported FC System</td>
<td style="text-align: left" data-mce-style="text-align: left">Betaflight Inav Fettec ArduPilotKiss</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">OSD</td>
<td style="text-align: left" data-mce-style="text-align: left">Canvas mode</td>
</tr>
<tr style="text-align: left" data-mce-style="text-align: left">
<td style="text-align: left" data-mce-style="text-align: left">Latency</td>
<td style="text-align: left" data-mce-style="text-align: left">Average delay 22ms</td>
</tr>
<tr>
<td style="text-align: left" data-mce-style="text-align: left">Antenna</td>
<td style="text-align: left" data-mce-style="text-align: left">2(IPEX)</td>
</tr>
</tbody>
</table>
</div>
</div>
</div>
</div>

Bullet Points： The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models. Updated the design of PCB board and shell, improved the quality of VTX, more durable. Optimized the installation place of the antenna, it's better to protect the VTX. The position

Walksnail Avatar HD VTX V2 Module (Dual Antennas Version) – CADDX FPV


Bullet Points：




The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved th

Walksnail Avatar HD VTX V2 Module (Dual Antennas Version)

The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. 
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

The module includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, it&#39s better to protect the VTX.
The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.
The module includes a spare power pad, providing an extra opportunity for welding.


A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.





Specifications

Model: Avatar V2 module(Dual Antenna)

Communication Frequency: 725-5.850GHz

Transmitter Power (EIRP): FCC:&amplt30dBmCE:&amplt14dBmSRRC:&amplt20dBm MIC:&amplt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 32G

Recording: 1080p/720p

Weight: 15.4g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency: Average delay 22ms

Antenna: 2(IPEX)

Includes

1x Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)


The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide

Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version) from WREKD Co.

Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)

The Walksnail Avatar HD VTX Module V2 provides superior performance with a range of features, including 25*25mm and 20*20mm mounting holes, optimized antenna installation, frequency binding button, spare power pad and 32GB built-in storage for 1080P or 720P HD fly videos. Increased TVS protection and support for up to 

Walksnail Avatar HD VTX V2 Module Dual Antennas Version 32G (VTX ONLY) for Walksnail Avatar/Fatshark Dominator HD FPV System

The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. 
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

The module includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, it's better to protect the VTX.
The position of the frequency binding button has been changed, to make the frequency binding operation more convenient.
The module includes a spare power pad, providing an extra opportunity for welding.


A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.





Specifications

Model: Avatar V2 module(Dual Antenna)

Communication Frequency: 725-5.850GHz

Transmitter Power (EIRP): FCC:&lt30dBmCE:&lt14dBmSRRC:&lt20dBm MIC:&lt25dBm

1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)

Mounting Holes: 25.5x25.5mm 20x20mm

Dimensions: 33.5x33.5x10.5mm

Storage: 32G

Recording: 1080p/720p

Weight: 15.4g

Operating Temperature: -20-40℃

Channels: 8

Wide Power Input: 6V-25.2V

Supported FC System: Betaflight Inav Fettec ArduPilot Kiss

OSD: Canvas mode

Latency: Average delay 22ms

Antenna: 2(IPEX)

Includes

1x Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Version)


Walksnail Avatar HD V2 20x20 / 25x25 VTX Module - (Dual Antenna Versio

Walksnail Avatar HD V2 Pro VTX Kit - Micro Camera Pro, Dual Antenna Version

WALKSNAIL Avatar HD Pro Kit (Dual Antenna)

WALKSNAIL Avatar HD Pro Kit (Dual Antenna) - RMRC

The Walksnail Avatar HD Pro Kit (Dual Antennas version) utilizes cutting-edge H.265 coding, ensuring top-tier 1080p FPV visuals while maintaining minimal latency. 

#html-body [data-pb-style=ND7ASTQ]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=IO05LB1]{display:no

Walksnail Avatar HD Pro Kit - 32GB w/ Dual Antennas

<h3 style="text-align: left" data-mce-style="text-align: left">
<strong>Walksnail Avatar HD Pro kit (Dual Antennas Version)</strong><br>
</h3>
<div style="text-align: left" data-mce-style="text-align: left"><img alt="" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/1_6693b86b-9816-40fe-9110-90a3a60f89f4.jpg?v=1697782631"></div>
<div style="text-align: left" data-mce-style="text-align: left">
<h3 data-mce-fragment="1"><strong data-mce-fragment="1">features：</strong></h3>
<ul>
<li>Dual Antennas</li>
<li><span>Compatible 4K</span></li>
<li>FOV160°</li>
<li>6V-25.2V</li>
<li>4km range</li>
<li>22ms low latency</li>
<li>Built-in 32G storage</li>
<li>High frame starlight</li>
<li>1080P 120fps compatibility</li>
<li>Sony Starvis Ⅱ Technology</li>
</ul>
</div>
<div style="text-align: left" data-mce-style="text-align: left"><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/2_a80ae180-77a5-4803-8dbb-531f11776930.jpg?v=1697799663" alt=""></div>
<h3 data-mce-fragment="1"><strong data-mce-fragment="1">Bullet Points for Avatar HD Pro kit (Dual Antennas)</strong></h3>
<ul>
<li>The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Support 1080P/60FPS, 720P/120FPS.</li>
<li>Featuring a 1/1.8 inch Sony Starvis <meta charset="utf-8"> <span data-mce-fragment="1">Ⅱ </span>sensor, this camera delivers excellent night vision that's just as clear as day.</li>
</ul>
<div style="text-align: left" data-mce-style="text-align: left"><img alt="" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/3_db239c08-d489-41ff-9fd3-cd1a35bb05e0.jpg?v=1697792677"></div>
<div style="text-align: left" data-mce-style="text-align: left">
<ul>
<li>The camera supports Gyroflow, take you smooth and stable video quality.</li>
</ul>
<img data-mce-fragment="1" style="margin-bottom: 16px float: none" alt="supports Gyroflow" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/GIF16fps.gif?v=1679280057" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/GIF16fps_480x480.gif?v=1679280057" data-mce-style="float: none"><br>
</div>
<div style="text-align: left" data-mce-style="text-align: left">
<ul>
<li style="text-align: left" data-mce-style="text-align: left">The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.  </li>
<li style="text-align: left" data-mce-style="text-align: left">Updated the design of PCB board and shell, improved the quality of VTX, more durable.</li>
<li style="text-align: left" data-mce-style="text-align: left">Optimized the installation place of the antenna, so as to better protect the VTX.</li>
<li style="text-align: left" data-mce-style="text-align: left">The position of the frequency binding button has been changed to make the frequency binding operation more convenient.</li>
<li style="text-align: left" data-mce-style="text-align: left">A spare pad is added to provide two power connection modes. </li>
</ul>
<span style="font-size: 0.875rem"> <img data-mce-fragment="1" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/5_a74bf4a9-87aa-4ca8-bc05-0c352e5b4676.jpg?v=1697782652" alt="" data-mce-src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/5_a74bf4a9-87aa-4ca8-bc05-0c352e5b4676.jpg?v=1697782652"></span><br>
<article data-identifier-application__slash__x-doc-key="v1GXn4x3DLeonDQ4" data-identifier-application__slash__x-cangjie-fragment="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" data-clipboard-cangjie='["root",{"copyFrom":1329378339},["p",{"uuid":"lei4y6iyyt3vq4ejxk","ind":{"left":0},"list":{"listId":"y6t50qxp2xn","level":0,"isOrdered":false,"isTaskList":false,"isChecked":false,"listStyleType":"SCIR_ECIR_SREC","symbolStyle":{"shd":"#FFFFFF"},"listStyle":{"format":"bullet","text":"●","align":"left"},"hideSymbol":false,"extraData":{}}},["span",{"data-type":"text"},["span",{"highlight":"#FFFFFF","data-type":"leaf"},"TVS added, up to 8S"]]]]'>
<ul>
<li>New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.</li>
</ul>
</article>
<article data-identifier-application__slash__x-doc-key="v1GXn4x3DLeonDQ4" data-identifier-application__slash__x-cangjie-fragment="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" data-clipboard-cangjie='["root",{"copyFrom":1329378339},["p",{"uuid":"lei4y6iyyt3vq4ejxk","ind":{"left":0},"list":{"listId":"y6t50qxp2xn","level":0,"isOrdered":false,"isTaskList":false,"isChecked":false,"listStyleType":"SCIR_ECIR_SREC","symbolStyle":{"shd":"#FFFFFF"},"listStyle":{"format":"bullet","text":"●","align":"left"},"hideSymbol":false,"extraData":{}}},["span",{"data-type":"text"},["span",{"highlight":"#FFFFFF","data-type":"leaf"},"TVS added, up to 8S"]]]]'><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/6_290966f5-24c6-4f62-a7be-716aaca90ffd.jpg?v=1695276215" style="margin-bottom: 16px float: none"></article>
</div>
<div style="text-align: center" data-mce-style="text-align: center">
<div data-mce-fragment="1" style="text-align: left" data-mce-style="text-align: left">
<ul>
<li>The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.</li>
</ul>
</div>
<div data-mce-fragment="1" style="text-align: left" data-mce-style="text-align: left"><img alt="" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/7_07adb9a2-5388-4344-9a8b-77be62e090d6.jpg?v=1697792703"></div>
<div data-mce-fragment="1" style="text-align: left" data-mce-style="text-align: left">
<div data-mce-fragment="1" style="text-align: left" data-mce-style="text-align: left">
<ul data-mce-fragment="1">
<li>It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.</li>
</ul>
</div>
<div data-mce-fragment="1" style="text-align: left" data-mce-style="text-align: left"><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/GIF301.gif?v=1697622391" alt=""></div>
</div>
</div>
<ul>
<li>Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.</li>
</ul>
<div style="text-align: center" data-mce-style="text-align: center"><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/9_414bb70a-f9d8-499f-963d-2bd927b3ecd3.jpg?v=1695276321" style="margin-bottom: 16px float: none"></div>
<div style="text-align: center" data-mce-style="text-align: center"><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/10_7a7205eb-1872-426b-b1c5-e5ebcdf2fd5e.jpg?v=1695276654" style="margin-bottom: 16px float: none"></div>
<div style="text-align: center" data-mce-style="text-align: center"><img src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/11_dc4419c0-6b01-4579-91dd-d77ed17cb7e8.jpg?v=1695276668" style="margin-bottom: 16px float: none"></div>
<div data-mce-fragment="1" style="text-align: start" data-mce-style="text-align: start">
<table width="100%">
<tbody>
<tr>
<td><strong data-mce-fragment="1">Specification</strong></td>
<td></td>
</tr>
<tr>
<td><strong data-mce-fragment="1">Camera</strong></td>
<td> </td>
</tr>
<tr>
<td><span>Model</span></td>
<td><span>Avatar HD Pro Camera</span></td>
</tr>
<tr>
<td><span>Image Sensor</span></td>
<td>
<span>1/1.8-Inch Sony Starvis </span><span data-mce-fragment="1">Ⅱ</span><span> Sensor</span>
</td>
</tr>
<tr>
<td><span>Resolution</span></td>
<td><span>1080P/60fps720P/120fps,720P/60fps1080P/120fps compatibility</span></td>
</tr>
<tr>
<td><span>Ratio</span></td>
<td><span>16/9 4/3</span></td>
</tr>
<tr>
<td><span>Lens</span></td>
<td><span>8Mp</span></td>
</tr>
<tr>
<td><span>FOV</span></td>
<td><span>160°</span></td>
</tr>
<tr>
<td><span>Aperture</span></td>
<td><span>F1.6</span></td>
</tr>
<tr>
<td><span>Shutter</span></td>
<td><span>Rolling shutter</span></td>
</tr>
<tr>
<td><span>Min.Illumination</span></td>
<td><span>0.00001Lux</span></td>
</tr>
<tr>
<td><span>Weight</span></td>
<td><span>9.5g</span></td>
</tr>
<tr>
<td><span>Dimensions</span></td>
<td><span>19*19*24mm</span></td>
</tr>
<tr>
<td><span>Coaxial Cable</span></td>
<td><span>140mm</span></td>
</tr>
<tr>
<td><strong>VTX</strong></td>
<td></td>
</tr>
<tr>
<td><span>Model</span></td>
<td><span>Avatar V2 Pro Module(Dual Antenna)</span></td>
</tr>
<tr>
<td><span>Communication Frequency</span></td>
<td><span>5.725-5.850GHz</span></td>
</tr>
<tr>
<td><span>Transmitter Power (EIRP)</span></td>
<td>
<span>FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm </span><span>MIC:&lt25dBm</span>
</td>
</tr>
<tr>
<td><span>1/O Interface</span></td>
<td><span>JST1.0*4(Power in)JST0.8*6(USB)</span></td>
</tr>
<tr>
<td><span>Mounting Holes</span></td>
<td><span>25.5*25.5mm 20*20mm</span></td>
</tr>
<tr>
<td><span>Dimensions</span></td>
<td><span>33.5*33.5*10.5mm</span></td>
</tr>
<tr>
<td><span>Storage</span></td>
<td><span>32G</span></td>
</tr>
<tr>
<td><span>Recording</span></td>
<td><span>1080p/720p</span></td>
</tr>
<tr>
<td><span>Weight</span></td>
<td><span mce-data-marked="1">15.4g</span></td>
</tr>
<tr>
<td><span>Operating Temperature</span></td>
<td><span>-20-40℃</span></td>
</tr>
<tr>
<td><span>Channels</span></td>
<td><span>8</span></td>
</tr>
<tr>
<td><span>Wide Power Input</span></td>
<td><span>6V-25.2V</span></td>
</tr>
<tr>
<td><span>Supported FC System</span></td>
<td><span>Betaflight Inav Fettec ArduPilotKiss</span></td>
</tr>
<tr>
<td><span>OSD</span></td>
<td><span>Canvas mode</span></td>
</tr>
<tr>
<td><span>Latency</span></td>
<td><span>Average delay 22ms</span></td>
</tr>
<tr>
<td><span>Antenna</span></td>
<td><span>2(IPEX)</span></td>
</tr>
<tr>
<td><span><strong>Avatar V2 Antenna</strong></span></td>
<td><span></span></td>
</tr>
<tr>
<td><span>Polarization</span></td>
<td><span>LHCP</span></td>
</tr>
<tr>
<td><span>Frequency range</span></td>
<td><span>5600MHz-6000MHz</span></td>
</tr>
<tr>
<td><span>Gain</span></td>
<td><span>1.9dBi</span></td>
</tr>
<tr>
<td><span>VSWR</span></td>
<td><span>≤1.5</span></td>
</tr>
<tr>
<td><span>Input Impedance</span></td>
<td><span>50Ω</span></td>
</tr>
<tr>
<td><span>Interface</span></td>
<td><span>IPEX-1</span></td>
</tr>
<tr>
<td><span>Size</span></td>
<td><span>R15 X 45mm(without cable)</span></td>
</tr>
<tr>
<td><span>Weight</span></td>
<td><span>2g</span></td>
</tr>
<tr>
<td><span><strong>Packing List</strong></span></td>
<td><span></span></td>
</tr>
<tr>
<td><span>USB transfer extension cable</span></td>
<td><span>X1</span></td>
</tr>
<tr>
<td><span>4 Pin silicone cable</span></td>
<td><span>X1</span></td>
</tr>
<tr>
<td><span>M2*4mm screws</span></td>
<td><span>X8</span></td>
</tr>
<tr>
<td><span>M2*5mm screws</span></td>
<td><span>X4</span></td>
</tr>
<tr>
<td><span>M2*6mm screws</span></td>
<td><span>X4</span></td>
</tr>
<tr>
<td><span>M2*14mm screws</span></td>
<td><span>X4</span></td>
</tr>
<tr>
<td><span>M2*5*0.5mm gasket</span></td>
<td><span>X4</span></td>
</tr>
</tbody>
</table>
<br>
</div>

Walksnail Avatar HD Pro kit (Dual Antennas Version) features： Dual Antennas Compatible 4K FOV160° 6V-25.2V 4km range 22ms low latency Built-in 32G storage High frame starlight 1080P 120fps compatibility Sony Starvis Ⅱ Technology Bullet Points for Avatar HD Pro kit (Dual Antennas) The Avatar HD system uses H.265 code, a

Walksnail Avatar HD Pro Kit (Dual Antennas Version) – CADDX FPV


Walksnail Avatar HD Pro kit (Dual Antennas Version)



features：

Dual Antennas
Compatible 4K
FOV160°
6V-25.2V
4km range
22ms low latency
Built-in 32G storage
High frame starlight
1080P 120fps compat

Walksnail Avatar HD Pro Kit (Dual Antennas Version)

This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency.  This kit includes the new VTX and camera, coming with 2 antennas. The micro camera comes with a 1/1.8 inch Sony Starvis Ⅱ sensor, come with extremely clear night vision. Supports 1080P/120fps high frame, the first high frame night vision HD camera in the FPV market. Walksnail Avatar camera has 160° wide-angle FOV, send you a more natural and real picture. This kit includes the new VTX and camera, coming with 2 antennas.
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features

Dual Antennas
Compatible 4K
FOV160°
6V-25.2V
4km range
22ms low latency
Built-in 32G storage
High frame starlight
1080P 120fps compatibility
Sony Starvis Ⅱ Technology






The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Support 1080P/60FPS, 720P/120FPS.
Featuring a 1/1.8 inch Sony Starvis Ⅱ sensor, this camera delivers excellent night vision that's just as clear as day.



The camera supports Gyroflow, take you smooth and stable video quality.



The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.  
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes. 



New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.




The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.




It supports high frame rate and standard frame rate at the same time. Under high frame rate, the average delay is 22ms.



Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.




 
Specifications
Camera

Model: Avatar HD Pro Camera
Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor
Resolution: 1080P/60fps720P/120fps,720P/60fps1080P/120fps compatibility
Ratio: 16/9 4/3
Lens: 8Mp
FOV: 160°
Aperture: F1.6
Shutter: Rolling shutter
Min.Illumination: 0.00001Lux
Weight: 9.5g
Dimensions: 19x19x24mm
Coaxial Cable: 140mm

VTX

Model: Avatar V2 Pro Module(Dual Antenna)
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:&lt30dBm CE:&lt14dBm SRRC:&lt20dBm MIC:&lt25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System:Betaflight Inav Fettec ArduPilotKiss
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2(IPEX)

Avatar V2 Antenna 

Polarization: LHCP
Frequency range: 5600MHz-6000MHz
Gain: 1.9dBi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R15 X 45mm(without cable)
Weight: 2g

Includes

1x Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro - (Dual Antenna Version)
1x USB transfer extension cable
1x 4 Pin silicone cable
8x M2x4mm screws
4x M2x5mm screws
4x M2x6mm screws
4x Mx14mm screws
4x M2x5x0.5mm gasket





This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX.

Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro - (Dual Antenna Version)

Walksnail Avatar HD Pro Kit 20x20 / 25x25 VTX Kit w/ Micro Camera Pro 

This Walksnail Avatar Digital HD Pro Kit is designed for use with Walksnail Avatar/Fatshark Dominator HD FPV systems. It features H.265 encoding to provide 1080p FPV image quality with ultra-low latency and 1/1.8 inch Sony Starvis Ⅱ sensor, come with extremely clear night vision as long as day vision. The kit also supp

Walksnail Avatar HD Pro Kit Dual Antennas Version 32G with Pro Camera+Gyroflow for Walksnail Avatar/Fatshark Dominator HD FPV System

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

Flywoo

Flywoo Naked O3 Ultra Air Unit Kit - Camera, VTX Module, Antennas

Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stability and reliability, providing greater maneuverability and extended flight time. Flywoo aims to meet the demands of drone enthusiasts, delivering excellent visual and control experience. Included with this kit is the naked O3 camera, naked O3 Ultra VTX, antenna, clear UV lens, and hardware. 
Overall, the Flywoo Naked O3 Lite/Ultra Air Unit is an excellent product for those who looking to shave off some weight from their DJI O3 Air Unit. There are 3D printed alternatives, but the ease of use, precision and robustness of CNC parts are probably better bets. The design is well thought-out, and the conversion process is straightforward.

Check out our Flywoo selection and check out our other DJI O3 Products!



















Features


Equipped with high-definition real-time transmission and video recording functions, with the advantage of low latency transmission.
Lightweight, solves the weight problem of micro drones, reducing up to 37%~50% of the weight.
Lightweight 7075 aluminum alloy fixed frame, sturdy and reliable.
Improves the control experience of micro drones and increases flight time. Can also create 4K high-definition videos in indoor or small spaces.











Specifications


Product Dimensions:  21.2x20x17.9mm(CAM)/29.8x28.8x13.3mm (VTX)
Transmission Resolution:  1080/4K 120FPS
Product Model:  FLYWOO O3 Ultra
Product Weight: 18.3g (O3 Ultra)
Input Voltage: 7V-26V







Recommended (Not Included)


Flywoo Naked O3 ND Filter Set - ND4/ND8/ND16







Includes


1x Flywoo Naked O3 Ultra Air Unit (w/ camera module &ampamp antennas)





Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stab

Flywoo Naked O3 Ultra Air Unit (w/ Camera, VTX Module & Antennas) from WREKD Co.

Flywoo Naked O3 Ultra Air Unit (w/ Camera, VTX Module & Antennas)

FLYWOO

Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stability and reliability, providing greater maneuverability and extended flight time. Flywoo aims to meet the demands of drone enthusiasts, delivering excellent visual and control experience. Included with this kit is the naked O3 camera, naked O3 Ultra VTX, antenna, clear UV lens, and hardware. 
Overall, the Flywoo Naked O3 Lite/Ultra Air Unit is an excellent product for those who looking to shave off some weight from their DJI O3 Air Unit. There are 3D printed alternatives, but the ease of use, precision and robustness of CNC parts are probably better bets. The design is well thought-out, and the conversion process is straightforward.

Check out our Flywoo selection and check out our other DJI O3 Products!



















Features


Equipped with high-definition real-time transmission and video recording functions, with the advantage of low latency transmission.
Lightweight, solves the weight problem of micro drones, reducing up to 37%~50% of the weight.
Lightweight 7075 aluminum alloy fixed frame, sturdy and reliable.
Improves the control experience of micro drones and increases flight time. Can also create 4K high-definition videos in indoor or small spaces.











Specifications


Product Dimensions:  21.2x20x17.9mm(CAM)/29.8x28.8x13.3mm (VTX)
Transmission Resolution:  1080/4K 120FPS
Product Model:  FLYWOO O3 Ultra
Product Weight: 18.3g (O3 Ultra)
Input Voltage: 7V-26V







Recommended (Not Included)


Flywoo Naked O3 ND Filter Set - ND4/ND8/ND16







Includes


1x Flywoo Naked O3 Ultra Air Unit (w/ camera module &amp antennas)





FLYWOO designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. 

#html-body [data-pb-style=Y59KH3B]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=DR6KUN6]{display:no

Flywoo Naked O3 Ultra Air Unit

Flywoo Naked O3 Lite Air Unit Kit - Camera, VTX Module, Antennas

FLYWOO designed the O3 Lite CNC modification kit, reducing weight by 37% respectively. 

#html-body [data-pb-style=MHPBHII]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=IMJ52KP]{display:no

Flywoo Naked O3 Lite Air Unit




Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stability and reliability, providing greater maneuverability and extended flight time. Flywoo aims to meet the demands of drone enthusiasts, delivering excellent visual and control experience. Included with this kit is the naked O3 camera, naked O3 Lite VTX, antenna, clear UV lens, and hardware. 
Overall, the Flywoo Naked O3 Lite/Ultra Air Unit is an excellent product for those who looking to shave off some weight from their DJI O3 Air Unit. There are 3D printed alternatives, but the ease of use, precision and robustness of CNC parts are probably better bets. The design is well thought-out, and the conversion process is straightforward.




Check out our Flywoo selection and check out our other DJI O3 Products!


















Features


Equipped with high-definition real-time transmission and video recording functions, with the advantage of low latency transmission.
Lightweight, solves the weight problem of micro drones, reducing up to 37%~50% of weight.
Lightweight 7075 aluminum alloy fixed frame, sturdy and reliable.
Improves the control experience of micro drones and increases flight time. Can also create 4K high-definition videos in indoor or small spaces.











Specifications


Product Dimensions:  21.2x20x17.9mm(CAM)/29.8x28.8x13.3mm (VTX)
Transmission Resolution:  1080/4K 120FPS
Product Model:  FLYWOO O3 LITE
Product Weight:  23.2g (O3 LITE)
Input Voltage: 7V-26V






Recommended (Not Included)


Flywoo Naked O3 ND Filter Set - ND4/ND8/ND16






Includes


1x Flywoo Naked O3 Lite Air Unit (w/ camera module &ampamp antennas)





Flywoo Naked O3 Lite Air Unit (w/ Camera, VTX Module & Antennas) from WREKD Co.

Flywoo Naked O3 Lite Air Unit (w/ Camera, VTX Module & Antennas)




Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stability and reliability, providing greater maneuverability and extended flight time. Flywoo aims to meet the demands of drone enthusiasts, delivering excellent visual and control experience. Included with this kit is the naked O3 camera, naked O3 Lite VTX, antenna, clear UV lens, and hardware. 
Overall, the Flywoo Naked O3 Lite/Ultra Air Unit is an excellent product for those who looking to shave off some weight from their DJI O3 Air Unit. There are 3D printed alternatives, but the ease of use, precision and robustness of CNC parts are probably better bets. The design is well thought-out, and the conversion process is straightforward.




Check out our Flywoo selection and check out our other DJI O3 Products!


















Features


Equipped with high-definition real-time transmission and video recording functions, with the advantage of low latency transmission.
Lightweight, solves the weight problem of micro drones, reducing up to 37%~50% of weight.
Lightweight 7075 aluminum alloy fixed frame, sturdy and reliable.
Improves the control experience of micro drones and increases flight time. Can also create 4K high-definition videos in indoor or small spaces.











Specifications


Product Dimensions:  21.2x20x17.9mm(CAM)/29.8x28.8x13.3mm (VTX)
Transmission Resolution:  1080/4K 120FPS
Product Model:  FLYWOO O3 LITE
Product Weight:  23.2g (O3 LITE)
Input Voltage: 7V-26V






Recommended (Not Included)


Flywoo Naked O3 ND Filter Set - ND4/ND8/ND16






Includes


1x Flywoo Naked O3 Lite Air Unit (w/ camera module &amp antennas)





BetaFPV

BetaFPV M03 25-350mW 5.8GHz VTX

BETAFPV

M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying.
Check out all our Micro/Nano VTXs and all our BetaFPV gear!

Features

With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission.
Only 1.1g and a tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable for the BETAFPV C02 camera.
Comes with IPX type of antenna, just plug and play, no extra solder work needed. 
M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G).

Diagram
Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, and NewBeeDrone BeeEye.


How to connect with the Flight Controller
Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board.


Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board.


Change Band &amp Band &amp Chnanel &amp Power

M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&gt VTX SA to change the frequency point and power.

Switchable power includes 25mW, 100mW, 200mW and 350mW. Except for the method via OSD menu as show above, the output power could be changed via the power button.

Specifications

Item: M03 5.8G VTX

Output power: 25/100/200/350mW (adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.1g (antenna not included)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Channel SEL: SmartAudio
Modulation type: FM
Frequency control: PLL

All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+80℃
Camera connector: JST-0.8, compatible with cameras like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye.

Includes


1x BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL
5x 30AWG silicone wire (30mm)


M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying. Check out all our Micro/Nano VTXs and all our BetaFPV gear! Features With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission. Only 1.1g and a tiny size for dro

BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL

M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying.
Check out all our Micro/Nano VTXs and all our BetaFPV gear!

Features

With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission.
Only 1.1g and a tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable for the BETAFPV C02 camera.
Comes with IPX type of antenna, just plug and play, no extra solder work needed. 
M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G).

Diagram
Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, and NewBeeDrone BeeEye.


How to connect with the Flight Controller
Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board.


Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board.


Change Band &ampamp Band &ampamp Chnanel &ampamp Power

M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&ampgt VTX SA to change the frequency point and power.

Switchable power includes 25mW, 100mW, 200mW and 350mW. Except for the method via OSD menu as show above, the output power could be changed via the power button.

Specifications

Item: M03 5.8G VTX

Output power: 25/100/200/350mW (adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.1g (antenna not included)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Channel SEL: SmartAudio
Modulation type: FM
Frequency control: PLL

All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+80℃
Camera connector: JST-0.8, compatible with cameras like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye.

Includes


1x BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL
5x 30AWG silicone wire (30mm)


BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL from WREKD Co.

M03 VTX, a ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer range flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and fun. 

Note: The current version for M03 VTX is V1.1.
Bullet Point

With the 25-350mW output power, M03 VTX provides a stable image and strong transmission.
Only 1.1g and tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable with BETAFPV C02 and C03 camera.
Comes with IPX type of antenna, just plug and play, no extra solder work needed. 
M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend to use it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G).




Specification

Item: M03 5.8G VTX

Output power: PIT/25/100/200/400mW (V1.1, adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.1g (antenna not included)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Channel SEL: SmartAudio
Modulation type: FM
Frequency control: PLL

All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+80℃
Camera connector: JST-0.8, compatible with camera like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye.



Diagram
Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, C03 and NewBeeDrone BeeEye.


How to Connect with FC
Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board.


Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board.

Change Band &amp Channel &amp Power
M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -&gt VTX SA to change the frequency point and power.

Switchable power includes 25mW, 100mW, 200mW and 350mW. Except the method via OSD menu as show above, the output power could be changed via the power button.

Below is the frequency table of M03 VTX V1.0 and V1.1.

FAQ


The newest version of M03 VTX is V1.1, which has a different VTX configuration. Pilots should flash the relevant VTX file for V1.0 and V1.1 versions. Click here to download the VTX table file for M03 VTX V1.0 and V1.1.


Package

1 * BETAFPV M03 5.8G VTX (antenna assembled)
5 * 30AWG silicone wire (30mm)



M03 VTX, a ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer range flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and fun.  Note: The current version for M03 VTX is V1.1. Bullet Po

M03 5.8G VTX

HDZero

HDZero Whoop Lite Video Transmitter 

Description Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.  Whoop lite VTX Specification: &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009     HDZero Whoop lite Bundle&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU：&#009&#009&#009&#009&#009&#009&#009&#009&#009     HDZ3101&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#009     5.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution:&#009&#009&#009&#009&#009&#009&#009&#009&#009     1280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power：&#009&#009&#009&#009&#009&#009&#009&#009&#009      25mW/200mW RF output&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009      U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009      MIPI&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009FC protocol&#009&#009&#009&#009&#009&#009&#009&#009&#009      Smart Audio Support/MSP&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#009      32.5x32.5mm (29x29mm inner)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#009      4.5grames/4mm Thickness (w/o shielding)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#009      7W&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power input：&#009&#009&#009&#009&#009&#009&#009&#009&#009      1S-3S&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting：&#009&#009&#009&#009&#009&#009&#009&#009&#009      25.5x25.2 M2 soft mounting&#009&#009&#009&#009&#009&#009 Nano Lite Camera Specification: &#009&#009&#009&#009&#009&#009&#009&#009&#009Size:                          &#009&#009&#009&#009&#009&#009&#009&#009&#009    14x16x11mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:               &#009&#009&#009&#009&#009&#009&#009&#009&#009    1.5gram&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Sensor: &#009&#009&#009&#009&#009&#009&#009&#009&#009    0.5 inch, up to 10650 mV/Lux-sec&#009&#009&#009    Ultra-high sensitive CMOS sensor&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009FOV:&#009&#009&#009&#009&#009&#009&#009&#009&#009    - 4:3   D:130° H:108° V:84°&#009&#009&#009    - 16:9 D:122° H:108° V:65°&#009&#009&#009&#009&#009&#009Includes HDZero Whoop Lite VTX * 1HDZero Nano Lite Camera * 1Dipole Antenna * 1；40mm Mipi Cable * 1；Power/Uart Cable * 5；Zip ties * 2；Rubber Grommet (M3 to M2) * 4 Crazy Fast! Crazy Fun! Racing &ampamp Crashing with a New HDZero Lite 1S Whoop. - YouTubeNew HDZero Nano V2 Lite Camera // Whoop Lite vTx is Good Too - YouTube

Description Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.  Whoop lite VTX Specification: 									Model:									     HDZero Whoop lite Bundle													SKU：									     HDZ3101													Frequency: 									     5.725-5.850GHz													Resolution:									     1280*720@60fps													RF power：									      25mW/200mW RF output													RF Connector:									      U.FL													Video Connector:									      MIPI													FC protocol									      Smart Audio Support/MSP													Size: 									      32.5x32.5mm (29x29mm inner)													Weight:									      4.5grames/4mm Thickness (w/o shielding)													Power:  									      7W													Power input：									      1S-3S													Mounting：									      25.5x25.2 M2 soft mounting						 Nano Lite Camera Specification: 									Size:                          									    14x16x11mm													Weight:               									    1.5gram													Sensor: 									    0.5 inch, up to 10650 mV/Lux-sec			    Ultra-high sensitive CMOS sensor													FOV:									    - 4:3   D:130° H:108° V:84°			    - 16:9 D:122° H:108° V:65°						Includes HDZero Whoop Lite VTX * 1;HDZero Nano Lite Camera * 1;Dipole Antenna * 1；40mm Mipi Cable * 1；Power/Uart Cable * 5；Zip ties * 2；Rubber Grommet (M3 to M2) * 4; Crazy Fast! Crazy Fun! Racing &amp; Crashing with a New HDZero Lite 1S Whoop. - YouTubeNew HDZero Nano V2 Lite Camera // Whoop Lite vTx is Good Too - YouTube

HDZero Whoop Lite Bundle | HDZERO

HDZero Whoop Lite Bundle

Divimath

Until now, 1S tiny whoops were the last type of FPV drone that couldn&#39t be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.
Check out all our Shark Byte gear, and our HDZero selection!

Features

Ultra-high sensitive CMOS sensor

Excellent low light performance

HDZero Nano Lite Camera

HDZero Whoop Lite VTX

Removal Shielding Box

Supports Smart Audio

Under 7g in Weight

Antenna Retention

4mm Thickness

1S-3S Input

Specifications
HDZERO WHOOP LITE VTX

Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 7g total package


HDZERO NANO LITE CAMERA

Size: 14x16x11mm

Weight: 1.5gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65°


Includes

1x HDZero Whoop Lite VTX 

1x HDZero Nano Lite Camera 

1x Dipole Antenna

1x 40mm Mipi Cable 

1x Power/Uart Cable

2x Zip ties

4x Rubber Grommet 



Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Wh

HDZero Whoop Lite Bundle Kit from WREKD Co.

HDZero Whoop Lite Bundle Kit

HDZERO

Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. 
Check out all our Shark Byte gear, and our HDZero selection!

Features

Ultra-high sensitive CMOS sensor

Excellent low light performance

HDZero Nano V3 Camera

HDZero Whoop Lite VTX

Removal Shielding Box

Supports Smart Audio
Antenna Retention

4mm Thickness

1S-3S Input

Specifications
HDZERO WHOOP LITE VTX

Input Voltage: 1S-3S

Output Power: 23mW, 200mW
Operating Frequency: 5.727-5.850GHz
Resolution: 1280x720@60fps
Power Consumption: 5W @ 25mW, 5.8W @ 200mW
MSP Canvas Mode: Yes
Antenna Interface: U.FL (IPEX 1)
Operating Temperature: 32-104°F
Mounting Pattern: 25x25mm, M2
Weight: 4.5g/4mm Thickness (w/o shielding)


HDZERO NANO V3 CAMERA

Size: 14x16x14mm

Weight: 2.2gram

Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor

FOV: D:155° H:126° V:94°



Includes

1x HDZero Whoop Lite VTX 

1x HDZero Nano V3 Camera 

1x Dipole Antenna

1x 40mm Mipi Cable 

1x Power/Uart Cable

2x Zip ties

4x Rubber Grommet 



Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts.  Check out all our Shark Byte gear, and our HDZero s

About this product The HDZero Whoop Lite Bundle is exactly what you need to transform your 1S Whoop for the digital FPV world. The HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables












HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL is here for your drone needs! Perfect for those feather-lite drones where saving every gram matters, this VTX is a digital HD 720p 60fps video transmitter with up to 200mw on 5.8GHz, perfect for racing.











Check out all our VTXs and our HDZero selection.


Specification

1-3S Input
25mW/200mW RF output
Smart Audio Support
25.5x25.2 M2 soft mounting
Antenna Retention
Removal Shielding Box
32.4x32.5mm (29x29mm inner)
4.5grames/4mm Thickness (w/o shielding)

Includes

1x HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL


HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL is here for your drone needs! Perfect for those feather-lite drones where saving every gram matters, this VTX is a digital HD 720p 60fps video transmitter with up to 200mw on 5.8GHz, perfect for racing. Check out all our VTXs and our HDZero selection. Specification 1-

HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL

HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL from WREKD Co.

The HDZero Whoop Lite VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing

HDZero Whoop Lite VTX | Five33

HDZero Whoop Lite VTX

Until now, 1S tiny whoops were the last type of FPV drone that couldn&#39t be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.

HDZero Whoop Lite Bundle VTXCamera - RMRC

HDZero Whoop Lite Bundle VTX/Camera

#html-body [data-pb-style=UAM4UY2]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=Y9ISXRC]{display:no

HDZero Whoop Lite VTX 

Description The HDZero Whoop Lite VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing.  It works with the Shark Byte RX5.1 goggle module to receive video. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Model:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZero Whoop Lite VTX&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SKU:&#009&#009&#009&#009&#009&#009&#009&#009&#009HDZ3100&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Frequency: &#009&#009&#009&#009&#009&#009&#009&#009&#0095.8G&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Resolution Default:&#009&#009&#009&#009&#009&#009&#009&#009&#0091280*720@60fps&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF power:&#009&#009&#009&#009&#009&#009&#009&#009&#00925mw/200mw&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009RF Connector:&#009&#009&#009&#009&#009&#009&#009&#009&#009U.FL&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Interface: &#009&#009&#009&#009&#009&#009&#009&#009&#0094 lane MIPI CSI YUV422&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video Connector: &#009&#009&#009&#009&#009&#009&#009&#009&#00920 Position 0.30mm Pitch&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Size: &#009&#009&#009&#009&#009&#009&#009&#009&#00932.4x32.5mm (29x29mm inner)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight:&#009&#009&#009&#009&#009&#009&#009&#009&#0094.5grames/4mm Thickness (w/o shielding)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power:  &#009&#009&#009&#009&#009&#009&#009&#009&#0091000mA@5V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009power input&#009&#009&#009&#009&#009&#009&#009&#009&#0091S-3S&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting:&#009&#009&#009&#009&#009&#009&#009&#009&#00925.5x25.2 M2 soft mounting&#009&#009&#009&#009&#009&#009 Includes HDZero Whoop Lite VTX * 1Power/Uart Cable * 5；Zip ties * 2；Rubber Grommet (M3 to M2) * 4  Crazy Fast! Crazy Fun! Racing &ampampamp Crashing with a New HDZero Lite 1S Whoop. - YouTube

Description The HDZero Whoop Lite VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing.  It works with the Shark Byte RX5.1 goggle module to receive video. Specifications  									Model:									HDZero Whoop Lite VTX													SKU:									HDZ3100													Frequency: 									5.8G													Resolution Default:									1280*720@60fps													RF power:									25mw/200mw													RF Connector:									U.FL													Interface: 									4 lane MIPI CSI YUV422													Video Connector: 									20 Position 0.30mm Pitch													Size: 									32.4x32.5mm (29x29mm inner)													Weight:									4.5grames/4mm Thickness (w/o shielding)													Power:  									1000mA@5V													power input									1S-3S													Mounting:									25.5x25.2 M2 soft mounting						 Includes HDZero Whoop Lite VTX * 1;Power/Uart Cable * 5；Zip ties * 2；Rubber Grommet (M3 to M2) * 4;  Crazy Fast! Crazy Fun! Racing &amp;amp; Crashing with a New HDZero Lite 1S Whoop. - YouTube

HDZero Whoop Lite VTX | HDZERO

About this product TheHDZero Whoop Lite VTXis a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing. It works with the Shark Byte RX5.1 goggle module to receive video. VIDEO: HDZero Whoop Lite 1S VTX: EVERYTHING You Need To Know Features Ultra-high sensitive CM

HDZero Whoop Lite VTX W/ MIPI 80mm cable

Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoop Lite is here to meet these needs and is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g 

HDZero Whoop Lite VTX By Divimath




Features


Ultra-high sensitive CMOS sensor
Excellent low light performance
Removable Shielding Box
Supports Smart Audio
Under 7g in Weight
4mm Thickness
1S-3S Input






Specifications


Mounting Pattern: 25.5x25.2 M2 (soft mounting)
Dimensions: 32.4x32.5mm (29x29mm inner)
Video Connector: 20 Position 0.30mm Pitch
Resolution Default: 1280*720@60fps
Interface: 4-lane MIPI CSI YUV422
RF Power: 25mw/200mw
Smart Audio: Supported
Power: 1000mA@5V
Power input: 1S-3S
RF Connector: U.FL
Frequency: 5.8G
Thickness: 4mm
SKU: HDZ3100
Weight: 4.5g






Includes


1x HDZero Whoop Lite VTX
4x Rubber Grommet (M3 to M2)
5x Power/Uart Cable
2x Zip ties





Features Ultra-high sensitive CMOS sensor Excellent low light performance Removable Shielding Box Supports Smart Audio Under 7g in Weight 4mm Thickness 1S-3S Input Specifications Mounting Pattern: 25.5x25.2 M2 (soft mounting) Dimensions: 32.4x32.5mm (29x29mm inner) Video Connector: 20 Position 0.30mm Pitch Resolution D

#html-body [data-pb-style=ITUDELG]{display:none}#html-body [data-pb-style=JI2E4YM]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scro

HDZero Freestyle V2 1W Digital HD VTX Kit

HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Moreover, the ante

HDZero Freestyle V2 20x20 25-1000mW HD VTX Kit W/u.FL

The HDZero Freestyle V2 VTX Kit is a 2nd generation 5.8GHz digital video transmitter kit with a camera, VTX, and antenna that can fit most of the 3.5-inch and 5-inch drones. 

#html-body [data-pb-style=C2AQXNJ]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=O1TLNUR]{display:no

HDZero Freestyle V2 VTX Kit


HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Moreover, the antenna and MIPI cable are secured with a retention bar and screws. This VTX supports 720p60, 1080p30, 540p60, and 540p90 video modes. 























This VTX can fit most frames that can accommodate the Caddx Vista/Runcam Link VTX.
The kit includes a Runcam HDZero Nano 90, HDZero RHCP Antenna, and a 120mm MIPI Cable. 
The RunCam HDZero Nano 90 HD Camera is the first 90fps camera for HDZero VTX. This camera enables HDZero to be 5ms faster than analog 60i video to show a full field/frame.











Check out all our VTXs and our HDZero selection.
















Specification
Freestyle V2 VTX

Manufacturer:  Divimath, Inc
Model:  HDZero Freestyle V2 VTX
Weight:  22.3g
Dimensions:  29x30x14mm
Operating Frequency:  5.725-5.850GHz
Transmitter Power:  25mW, 200mW, XXXXmW
Mounting Pattern:  20x20mm M2 Holes
Antenna Interface:  Secured u.FL
Video In:  Secured MIPI
SmartAudio:  YES
MSP Canvas Mode:  YES
Input Power:  7-25V
Operating Temperature:  32F-104F (0-40C)
Power Consumption:  6-15W

Runcam HDZero Nano 90

Resolution: 540P@90fps 4:3 | 720P@60fps 4:3
Dimensions: L18mmxW14mmxH18mm
Lens: FOV D:160° H:127° V:92°
Net Weight: 5.2g(without cable)
Shutter: Rolling Shutter
Image Sensor: 1/3&quot

Includes

1x  HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL

1x Nano 90 Camera (with 19 x 19 Mount)


1x HDZero RHCP Antenna


1x 120mm MIPI Cable


1x Power Cable


1x SA Cable


1x Plastic bar for MIPI Cable with 3x Screws (M1.4 x 2mm)


1x Plastic bar for U.FL with 3x Screws (M1.4 x 8mm)

1x Double Sided Tape (29 x 30 x 1mm)

Wiring Diagram


HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX Kit - U.FL from WREKD Co.

HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX Kit - U.FL

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Manufacturer &#009&#009&#009&#009&#009&#009&#009&#009&#009    Divimath, Inc&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Model&#009&#009&#009&#009&#009&#009&#009&#009&#009    HDZero Freestyle V2 VTX&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight&#009&#009&#009&#009&#009&#009&#009&#009&#009    22.3 g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Dimensions&#009&#009&#009&#009&#009&#009&#009&#009&#009    29x30x14mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Frequency &#009&#009&#009&#009&#009&#009&#009&#009&#009    5.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Transmitter Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    25mW,200mW&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting Pattern&#009&#009&#009&#009&#009&#009&#009&#009&#009    20x20mm M2 holes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Antenna Interface&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured U.FL &#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video In&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured MIPI&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SmartAudio&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009MSP Canvas Mode&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Input Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    7-25V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Temperature&#009&#009&#009&#009&#009&#009&#009&#009&#009    32˚F-104 ˚F (0˚-40˚C)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power Consumption&#009&#009&#009&#009&#009&#009&#009&#009&#009    6-15W&#009&#009&#009&#009&#009&#009  Includes &#0091x Freestyle V2 VTX&#0091x Nano 90 Camera (with 19 x 19 Mount)&#0091x HDZero RHCP antenna&#0091x 120mm Mipi Cable&#0091x Power Cable&#0091x SA Cable&#0091x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).&#0091x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)&#0091x Double Sided Tape (29 x 30 x 1mm )

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  									Manufacturer 									    Divimath, Inc													Model									    HDZero Freestyle V2 VTX													Weight									    22.3 g													Dimensions									    29x30x14mm													Operating Frequency 									    5.725-5.850GHz													Transmitter Power									    25mW,200mW													Mounting Pattern									    20x20mm M2 holes													Antenna Interface									    Secured U.FL 													Video In									    Secured MIPI													SmartAudio									    Yes													MSP Canvas Mode									    Yes													Input Power									    7-25V													Operating Temperature									    32˚F-104 ˚F (0˚-40˚C)													Power Consumption									    6-15W						  Includes 	1x Freestyle V2 VTX	1x Nano 90 Camera (with 19 x 19 Mount)	1x HDZero RHCP antenna	1x 120mm Mipi Cable	1x Power Cable	1x SA Cable	1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).	1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)	1x Double Sided Tape (29 x 30 x 1mm )

HDZero Freestyle V2 Kit | HDZERO

HDZero Freestyle V2 Kit


HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Moreover, the antenna and MIPI cable are secured with a retention bar and screws. This VTX supports 720p60, 1080p30, 540p60, and 540p90 video modes. 























This VTX can fit most frames that can accommodate the Caddx Vista/Runcam Link VTX.
The kit includes a Runcam HDZero Nano 90, HDZero RHCP Antenna, and a 120mm MIPI Cable. 
The RunCam HDZero Nano 90 HD Camera is the first 90fps camera for HDZero VTX. This camera enables HDZero to be 5ms faster than analog 60i video to show a full field/frame.











Check out all our VTXs and our HDZero selection.
















Specification
Freestyle V2 VTX

Manufacturer:  Divimath, Inc
Model:  HDZero Freestyle V2 VTX
Weight:  22.3g
Dimensions:  29x30x14mm
Operating Frequency:  5.725-5.850GHz
Transmitter Power:  25mW, 200mW, XXXXmW
Mounting Pattern:  20x20mm M2 Holes
Antenna Interface:  Secured u.FL
Video In:  Secured MIPI
SmartAudio:  YES
MSP Canvas Mode:  YES
Input Power:  7-25V
Operating Temperature:  32F-104F (0-40C)
Power Consumption:  6-15W

Runcam HDZero Nano 90

Resolution: 540P@90fps 4:3 | 720P@60fps 4:3
Dimensions: L18mmxW14mmxH18mm
Lens: FOV D:160° H:127° V:92°
Net Weight: 5.2g(without cable)
Shutter: Rolling Shutter
Image Sensor: 1/3"

Includes

1x  HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL

1x Nano 90 Camera (with 19 x 19 Mount)


1x HDZero RHCP Antenna


1x 120mm MIPI Cable


1x Power Cable


1x SA Cable


1x Plastic bar for MIPI Cable with 3x Screws (M1.4 x 2mm)


1x Plastic bar for U.FL with 3x Screws (M1.4 x 8mm)

1x Double Sided Tape (29 x 30 x 1mm)

Wiring Diagram


HDZero Freestyle V2 20x20 25-1000mW Digital HD VTX - U.FL

HDZero Freestyle V2 1W Digital HD VTX

HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC case that guarantees protection and durable RF shielding with improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. Mor

HDZero Freestyle V2 20x20 25-1000mW HD VTX - U.FL

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  &#009&#009&#009&#009&#009&#009&#009&#009&#009Manufacturer &#009&#009&#009&#009&#009&#009&#009&#009&#009    Divimath, Inc&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Model&#009&#009&#009&#009&#009&#009&#009&#009&#009    HDZero Freestyle V2 VTX&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Weight&#009&#009&#009&#009&#009&#009&#009&#009&#009    22.3 g&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Dimensions&#009&#009&#009&#009&#009&#009&#009&#009&#009    29x30x14mm&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Frequency &#009&#009&#009&#009&#009&#009&#009&#009&#009    5.725-5.850GHz&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Transmitter Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    25mW,200mW&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Mounting Pattern&#009&#009&#009&#009&#009&#009&#009&#009&#009    20x20mm M2 holes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Antenna Interface&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured U.FL &#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Video In&#009&#009&#009&#009&#009&#009&#009&#009&#009    Secured MIPI&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009SmartAudio&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009MSP Canvas Mode&#009&#009&#009&#009&#009&#009&#009&#009&#009    Yes&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Input Power&#009&#009&#009&#009&#009&#009&#009&#009&#009    7-25V&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Operating Temperature&#009&#009&#009&#009&#009&#009&#009&#009&#009    32˚F-104 ˚F (0˚-40˚C)&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009&#009Power Consumption&#009&#009&#009&#009&#009&#009&#009&#009&#009    6-15W&#009&#009&#009&#009&#009&#009  Includes &#0091x Freestyle V2 VTX&#0091x Power Cable&#0091x SA Cable&#0091x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).&#0091x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)&#0091x Double Sided Tape (29 x 30 x 1mm)

Description The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws. The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes. The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities. Specifications  									Manufacturer 									    Divimath, Inc													Model									    HDZero Freestyle V2 VTX													Weight									    22.3 g													Dimensions									    29x30x14mm													Operating Frequency 									    5.725-5.850GHz													Transmitter Power									    25mW,200mW													Mounting Pattern									    20x20mm M2 holes													Antenna Interface									    Secured U.FL 													Video In									    Secured MIPI													SmartAudio									    Yes													MSP Canvas Mode									    Yes													Input Power									    7-25V													Operating Temperature									    32˚F-104 ˚F (0˚-40˚C)													Power Consumption									    6-15W						  Includes 	1x Freestyle V2 VTX	1x Power Cable	1x SA Cable	1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).	1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)	1x Double Sided Tape (29 x 30 x 1mm)