FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

TBS Crossfire Immortal T Extended Antenna V2

About this product TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to a longer 120mm and is the perfect companion for long range pilots. The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to 

TBS Crossfire Immortal T Antenna V2 - Extended

Team BlackSheep

TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to a longer 120mm and is the perfect companion for long range pilots.

TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to a longer 120mm and is the perfect companion for long range pilots.
The centerpiece housing is made out of a rubberized plastic mater

THE EXTENDED TBS IMMORTAL T V2 ANTENNA! With improved signal sentitivity and durability, the extended Immortal T antenna is the perfect companion for long range pilots. The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from cra

TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to a longer 120mm and is the perfect companion for long range pilots.
Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.﻿
Features
The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes. The spring-steel element still carries the same immortality from V1 which will protect itself from prop-strikes and incorrect mounting. Further tuning on the center element provides better coverage and range. The extended version has a 120mm long cable, ideal for larger aircraft like the TBS Caipirinha 2, or for long range rigs which require additional clearance!
Specifications

Weight: 3.7g
Width: 15cm
Cable length: 120mm
Connector: u.FL / IPX
Antenna Frequency: 915 MHz

Includes
 

TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to a longer 120mm and is the perfect companion for long range pilots. Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.﻿ Features The centerpiece housing is made 

TBS Crossfire Immortal T V2 Extended 900MHz 120mm u.FL Linear Antenna

Antenna Connector

Antennas send signals to and from your VRX/VTX and RX/TX. Many video transmitters and radio receivers come with antennas. Ensure if you need them. Or choose upgrades to increase range and penetration. Select appropriate antennas based on connector, radio frequency, and polarization (if circularly polarized). 

Antennas

Antenna Frequency

Polarization

TBS Crossfire Immortal T Extra Extended Antenna V2

TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to an even longer 220mm and is the perfect companion for long range pilots.

TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to an even longer 220mm and is the perfect companion for long range pilots.
The centerpiece housing is made out of a rubberized plastic

TBS Crossfire Immortal T Antenna V2 - Extra Extended

THE EXTRA EXTENDED TBS IMMORTAL T V2 ANTENNA! With improved signal sensitivity and durability, the extended Immortal T antenna is the perfect companion for long range pilots with big big rigs. The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further mi

TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to an even longer 220mm and is the perfect companion for long range pilots.
Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.
Features
The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes. The spring-steel element still carries the same immortality from V1 which will protect itself from prop-strikes and incorrect mounting. Further tuning on the center element provides better coverage and range. The extended version has a 120mm long cable, ideal for larger aircraft like the TBS Caipirinha 2, or for long-range rigs that require additional clearance!
Specifications

Weight: 4g
Width: 15cm
Cable length: 220mm
Connector: u.FL / IPX

Includes

1x TBS Crossfire Immortal T V2 Extra Extended 900MHz 220mm u.FL Linear Antenna


TBS has the improved signal sensitivity and durability of the Immortal T antenna. The stem has also been extended to an even longer 220mm and is the perfect companion for long range pilots. Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories. Features The centerpiece housing is 

TBS Crossfire Immortal T V2 Extra Extended 900MHz 220mm u.FL Linear Antenna

TBS Crossfire Immortal T V2 Extra Extended 900MHz 220mm u.FL Linear An

TBS Crossfire Immortal T Antenna V2

The TBS Immortal T antenna is a mashup between the stock TX antenna and the regular dipole antenna included with the TBS Crossfire Micro RX. It serves as an upgrade and is immune to prop-strikes or incorrect mounting. 
Strap it to your top or bottom plate in either horizontal or vertical fashion, and let her rip! The performance is exactly the same as the stock antennas, but because we're using spring-steel and a durable, impact-resistant plastic center piece, it's almost impossible to break!


Weight: 3.4g

Width: 16.4cm

Cable length: 80mm

Connector: u.FL / IPX


TBS CROSSFIRE IMMORTAL T ANTENNA The TBS Immortal T antenna is a mashup between the stock TX antenna and the regular dipole antenna included with the TBS Crossfire Micro RX. It serves as an upgrade and is immune to prop-strikes or incorrect mounting.  Strap it to your top or bottom plate in either horizontal

TBS Crossfire Immortal T (V2) Antenna

TBS CROSSFIRE IMMORTAL T ANTENNA DroneRacingParts.com

TBS has the improved signal sensitivity and durability of the Immortal T antenna.

Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.
Features
The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes. The spring-steel element still carries the same immortality from V1 which will protect itself from prop-strikes and incorrect mounting. Further tuning on the center element provides better coverage and range.
Specifications

Weight: 3.4g
Width: 15cm
Cable length: 80mm
Connector: u.FL / IPX
Antenna Frequency: 915 MHz

Includes

1x Immortal T Antenna V2


TBS has the improved signal sensitivity and durability of the Immortal T antenna. Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories. Features The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize

TBS Crossfire Immortal T V2 900MHz 80mm u.FL Linear Antenna

TBS has the improved signal sensitivity and durability of the Immortal T antenna.
The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes. The spring

About this product TBS has the improved signal sensitivity and durability of the Immortal T antenna. The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes. The spring-steel element still carries the same immortality fr

TBS Crossfire Immortal T Stock V2 900MHz Linear Antenna - SMA

Introducing the Crossfire Stock TX V2 Antenna! Team Black Sheep (TBS) has updated its previous antenna to bring you a more durable one and in the process, TBS managed to improve signal quality. Like the V1, this antenna can be used for both 868 and 915 applications, it can even be used as a receiver antenna!
Check out the rest of out TBS Products and all our RC transmitters, modules, and accessories.
Specifications

Operating Frequency: 868 / 915 MHz
Connector: SMA

Includes

1x TBS Crossfire Immortal T Stock V2 900MHz SMA Linear Antenna


Introducing the Crossfire Stock TX V2 Antenna! Team Black Sheep (TBS) has updated its previous antenna to bring you a more durable one and in the process, TBS managed to improve signal quality. Like the V1, this antenna can be used for both 868 and 915 applications, it can even be used as a receiver antenna! Check out 

TBS Crossfire Immortal T Stock V2 900MHz SMA Linear Antenna

Lumenier

Lumenier AXII Quadro Patch 5.8GHz SMA Antenna

LUMENIER

The Lumenier AXII Quadro 5.8GHz Patch Antenna offers you the best performance you can get from a high gain antenna designed for long-range FPV. The Lumenier AXII Quadro features a custom 4x patch antenna network improving both efficiency and gain. This antenna has an incredible 14.7 dBiC gain for long-range flying and excellent penetration through objects compared to standard omnidirectional FPV antennas. It also features a best-in-class 95% efficiency (most patch antennas are below 75%), which means you get amazing performance. Additionally, the AXII Quadro has a 40 degree FOV (field of view) both horizontally and vertically, which is extremely wide for such a high gain antenna (most high gain antennas are below 30 degrees FOV). A wider FOV means you have more usable coverage in the direction the antenna is pointing.Lumenier, designed in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the Lumenier AXII Quadro 5.8GHz Patch Antenna.
Check out all our 5.8GHz VTX antennas and all our Lumenier products!
Features


Compact low-profile / light-weight design
Designed for goggles or base stations
Custom designed 4x patch antenna network
Wide 40-degree beam width (hor., vert.)
Incredible 95% efficient
Circularly Polarized
High Gain - 14.7 dBiC


Specifications

Connector: SMA
Dimensions: 90mm x 90mm x 14mm (24mm with SMA)
Right Hand or Left Hand Circularly Polarized (RHCP, LHCP versions)
FOV: 40° Horizontal/Vertical
Bandwidth: 220 Mhz
Frequency: 5.8GHz
Gain: 14.7dBi
Weight: 55g


 

Includes

 1x Lumenier AXII Quadro Patch 5.8GHz SMA Antenna - Choose Your Polarization
1x 45° SMA Adapter


The Lumenier AXII Quadro 5.8GHz Patch Antenna offers you the best performance you can get from a high gain antenna designed for long-range FPV. The Lumenier AXII Quadro features a custom 4x patch antenna network improving both efficiency and gain. This antenna has an incredible 14.7 dBiC gain for long-range flying and 

Lumenier AXII Quadro Patch 5.8GHz SMA Antenna - Choose Your Polarization

Lumenier AXII Quadro Patch 5.8GHz SMA Antenna - Choose Your Polarizati

VAS (Video Aerial Systems)

VAS 5.8GHz Micro Switchblade U.FL Antenna - RHCP

Video Aerial Systems

VAS 5.8Ghz Micro Switchblade Antenna by IBCrazy (RHCP)

The Micro Switchblade gives your micro-sized aircraft top-notch performance, yet weighs only 1 gram.  Don’t let the small size fool you, the Micro switchblade boasts an incredible 2.25dbic gain and 0.92 axial ratios making it perfect for f

VAS 5.8Ghz Micro Switchblade U.FL Antenna by IBCrazy (RHCP)

The Micro Switchblade gives your micro sized aircraft top notch performance, yet weighs only 1 gram. Don’t let the small size fool you, the Micro switchblade boasts an incredible 2.25dbic gain and 0.92 axial ratio making it perfect for freestyle and backyard bashing. Based on the proven Patented technology of the Ion, the Micro Switchblade is the lightest truly Circularly polarized antenna on the market. 
US Pat. No: 10,608346 &amp US Pat. No: 11,088462
Check out all our VTX Antennas and our selection of VAS products!
 

Specifications

Gain: 2.25dbic
Axial ratio: 0.92
Bandwidth: 5100MHz-6500MHz 
Polarization: Right Hand Circular Polarized (RHCP)
Weight: 1.4g

Includes

1X Video Aerial Systems VAS Micro Switchblade Long (92mm) 5.8GHz U.FL Antenna - RHCP



The Micro Switchblade gives your micro sized aircraft top notch performance, yet weighs only 1 gram. Don’t let the small size fool you, the Micro switchblade boasts an incredible 2.25dbic gain and 0.92 axial ratio making it perfect for freestyle and backyard bashing. Based on the proven Patented technology of the Ion, 

VAS Micro Switchblade Long (92mm) 5.8GHz U.FL Antenna - RHCP

NewBeeDrone

NewBeeDrone BeeTX 5.8Ghz Antenna

Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection.Specifications:Connector Type: U.FL (3mm)Frequency: 5.8GhzLength: 62mmPackage Includes:1 Replacement Antenna

Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection.
Specifications:

Connector Type: U.FL (3mm)
Frequency: 5.8Ghz
Length: 62mm

Package Includes:

1 Replacement Antenna


Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection. Specifications: Connector Type: U.FL (3mm) Frequency: 5.8Ghz Length: 62mm Package Includes: 1 Replacement Antenna

Direct plug-n-play replacement antenna for the BeeTX VTX board for the BeeBrain V2. We suggest using high-temp silicone glue to cover the UFL connection.
Specifications

Connector Type: U.FL (3mm)
Frequency: 5.8Ghz
Length: 62mm
Weight: 0.6g



NewBeeDrone BeeTX 5.8Ghz Antenna from WREKD Co.

Walksnail

Walksnail RedBird Antenna V2 5.8GHz For Avatar Goggles X - RP-SMA, LHCP

Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X
Check out all our RP-SMA antennas and our selection of Walksnail HD products!
Features


Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated RP-SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenarios.
Circularly polarised design with nearly perfect axial ratio.

Specifications

Bandwidth 5600-6000MHz
Polarization LHCP
Gain 1.5dBi
VSWR &amplt1.4
Efficiency 97%
Connector RP-SMA
Weight 3.5g
Size R15.5mm H20.5mm



Includes

2x Walksnail Redbird Antenna V2 For Avatar Goggles X


Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X Check out all our RP-SMA antennas and our selection of Walksnail HD products! Features Antenna unit using Laser-Direct-structuring for small size and high performance. Customised integrated RP-SMA socket, antenna height is only 20mm. Red

Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) - LHCP from WREKD Co.

Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) - LHCP

CADDX

Increase your range with these Redbird antennas for the Walksnail Avatar Goggles X
Check out all our RP-SMA antennas and our selection of Walksnail HD products!
Features


Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated RP-SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenarios.
Circularly polarised design with nearly perfect axial ratio.

Specifications

Bandwidth 5600-6000MHz
Polarization LHCP
Gain 1.5dBi
VSWR &lt1.4
Efficiency 97%
Connector RP-SMA
Weight 3.5g
Size R15.5mm H20.5mm



Includes

2x Walksnail Redbird Antenna V2 For Avatar Goggles X


Walksnail RedBird Antenna V2 5.8GHz RP-SMA For Avatar Goggles X (2pc) 

CADDX FPV

<p> </p>
<ul>
<li>Antenna unit using Laser-Direct-structuring for small size and high performance.</li>
<li>Customised integrated SMA socket, antenna height is only 20mm.</li>
<li>Redbird Antenna V2 for a wide range of flight scenarios.</li>
<li>Circularly polarised design with nearly perfect axial ratio.</li>
</ul>
<p>Parameter：</p>
<table width="100%" data-mce-fragment="1">
<tbody data-mce-fragment="1">
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Bandwidth</td>
<td style="width: 68.1665%" data-mce-fragment="1">5600-6000MHz</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Polarization</td>
<td style="width: 68.1665%" data-mce-fragment="1">LHCP</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Gain</td>
<td style="width: 68.1665%" data-mce-fragment="1">1.5dBi</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">VSWR</td>
<td style="width: 68.1665%" data-mce-fragment="1">&lt1.4</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Efficiency</td>
<td style="width: 68.1665%" data-mce-fragment="1">97%</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Connector<span> </span>
</td>
<td style="width: 68.1665%" data-mce-fragment="1">SMA-RP</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Weight</td>
<td style="width: 68.1665%" data-mce-fragment="1">3.5g</td>
</tr>
<tr data-mce-fragment="1">
<td style="width: 28.8247%" data-mce-fragment="1">Size</td>
<td style="width: 68.1665%" data-mce-fragment="1">R15.5mm H20.5mm</td>
</tr>
</tbody>
</table>

  Antenna unit using Laser-Direct-structuring for small size and high performance. Customised integrated SMA socket, antenna height is only 20mm. Redbird Antenna V2 for a wide range of flight scenarios. Circularly polarised design with nearly perfect axial ratio. Parameter： Bandwidth 5600-6000MHz Polarization LHCP Gain

Walksnail Redbird Antenna V2 For Avatar HD Goggles X (2pcs) – CADDX FPV

 

Antenna unit using Laser-Direct-structuring for small size and high performance.
Customised integrated SMA socket, antenna height is only 20mm.
Redbird Antenna V2 for a wide range of flight scenari

Walksnail Redbird Antenna V2 For Avatar HD Goggles X (2pcs)

VAS 5.8GHz Victory Long Range Antenna - RP-SMA

Video Aerial Systems (VAS)

The Victory is another new antenna technology from Video Aerial Systems and the mind of antenna developer IBCrazy. Don’t let the square shape and small size fool you, the Victory is a true high performance circularly polarized antenna that makes no compromise when it comes to performance. When used as a receiver antenna, the Victory’s small size and high axial ratio make it perfect for low profile mounts without sacrificing performance. When used as a transmitter antenna, the true 1.9dbic gain allows for extremely long range flights. The uniform radiation pattern makes it perfect for racing and freestyle flights.
Check out all our VTX Antennas and our selection of VAS products!
Specifications

Gain: 1.9dbic

Axial ratio: 0.96

Bandwidth: 5550-6100MHz

Weight: 3.5 grams

Cable: 100mm RG405 Semi-Rigid
Connector: RP-SMA

Includes

1x VAS 5.8GHz Victory Long Range RP-SMA Antenna - Choose Polarization


The Victory is another new antenna technology from Video Aerial Systems and the mind of antenna developer IBCrazy. Don’t let the square shape and small size fool you, the Victory is a true high performance circularly polarized antenna that makes no compromise when it comes to performance. When used as a receiver antenn

VAS 5.8GHz Victory Long Range RP-SMA Antenna - Choose Polarization from WREKD Co.

VAS 5.8GHz Victory Long Range RP-SMA Antenna - Choose Polarization

VAS 5.8GHz Victory Long Range Antenna - SMA

The Victory is another new antenna technology from Video Aerial Systems and the mind of antenna developer IBCrazy. Don’t let the square shape and small size fool you, the Victory is a true high performance circularly polarized antenna that makes no compromise when it comes to performance. When used as a receiver antenna, the Victory’s small size and high axial ratio make it perfect for low profile mounts without sacrificing performance. When used as a transmitter antenna, the true 1.9dbic gain allows for extremely long range flights. The uniform radiation pattern makes it perfect for racing and freestyle flights.
Check out all our VTX Antennas and our selection of VAS products!
Specifications

Gain: 1.9dbic

Axial ratio: 0.96

Bandwidth: 5550-6100MHz

Weight: 3.5 grams

Cable: 100mm RG405 Semi-Rigid
Connector: SMA

Includes

1x VAS 5.8GHz Victory Long Range SMA Antenna - Choose Polarization


VAS 5.8GHz Victory Long Range SMA Antenna - Choose Polarization

VAS 5.8GHz Victory Long Range SMA Antenna - Choose Polarization from WREKD Co.

VAS Walksnail VRX Crosshair XTreme Mini Mod - U.FL

When looking at the performance of today&#39s HD Video systems, it was clear that something was lacking. The lack of integrated antenna upgrades specifically for the Walksnail HD Video Receiver system lets a great VRX down. First we decided to come up with a 3D model that could be printed and house our Crosshair Xtreme antennas but that resulted in a much too large cover, that didn&#39t really look like it belonged. Then after much thought and discussion, we decided a single piece injection molded solution was needed. The result, the Walksnail VRX Crosshair™ Xtreme Mini Mod, a direct bolt on replacement of the front two stock patch antennas. Outfitted with 2 Crosshair™ Xtreme Minis, this mod is a great upgrade for both racers and freestyle pilots looking to push their flying to longer ranges or around objects that normally cause too much signal degradation. 
Check out all our FPV Receivers &ampamp Antennas and our selection of VAS products!


Specifications

Gain: 10dbic

Axial ratio: 0.99 (measured)

Bandwidth: 5300Mhz-6400MHz

Flight beam: 120 degrees

-3db point: +/- 30 degrees

Connector: u.fl x2

Includes

1x VAS Walksnail VRX Crosshair XTreme Mini Mod - Choose Polarization


When looking at the performance of today's HD Video systems, it was clear that something was lacking. The lack of integrated antenna upgrades specifically for the Walksnail HD Video Receiver system lets a great VRX down. First we decided to come up with a 3D model that could be printed and house our Crosshair Xtreme an

VAS Walksnail VRX Crosshair XTreme Mini Mod - Choose Polarization from WREKD Co.

VAS Walksnail VRX Crosshair XTreme Mini Mod - Choose Polarization

When looking at the performance of today's HD Video systems, it was clear that something was lacking. The lack of integrated antenna upgrades specifically for the Walksnail HD Video Receiver system lets a great VRX down. First we decided to come up with a 3D model that could be printed and house our Crosshair Xtreme antennas but that resulted in a much too large cover, that didn't really look like it belonged. Then after much thought and discussion, we decided a single piece injection molded solution was needed. The result, the Walksnail VRX Crosshair™ Xtreme Mini Mod, a direct bolt on replacement of the front two stock patch antennas. Outfitted with 2 Crosshair™ Xtreme Minis, this mod is a great upgrade for both racers and freestyle pilots looking to push their flying to longer ranges or around objects that normally cause too much signal degradation. 
Check out all our FPV Receivers &amp Antennas and our selection of VAS products!


Specifications

Gain: 10dbic

Axial ratio: 0.99 (measured)

Bandwidth: 5300Mhz-6400MHz

Flight beam: 120 degrees

-3db point: +/- 30 degrees

Connector: u.fl x2

Includes

1x VAS Walksnail VRX Crosshair XTreme Mini Mod - Choose Polarization


VAS 5.8GHz Crosshair XTreme Mini Antenna - RP-SMA

FPV’s favorite “patch killer” antenna has gotten smaller. The patented vector-phasing technology of the Crosshair™ Xtreme gives both longer range and better signal clarity. Designed to be a long range/obstacle penetration antenna improvements include increased gain, beamwidth, and bandwidth. Now in a smaller form factor.
Check out all our FPV Receivers &ampamp Antennas and our selection of VAS products!

 Specifications

Gain: 10dbic

Axial ratio: 0.99 (measured)

Bandwidth: 5300Mhz-6400MHz

Flight beam: 120 degrees

-3db point: +/- 30 degrees
Connector: RP-SMA 

Includes

1x VAS 5.8GHz Crosshair XTreme Mini RP-SMA Antenna - Choose Polarization


FPV’s favorite “patch killer” antenna has gotten smaller. The patented vector-phasing technology of the Crosshair™ Xtreme gives both longer range and better signal clarity. Designed to be a long range/obstacle penetration antenna improvements include increased gain, beamwidth, and bandwidth. Now in a smaller form facto

VAS 5.8GHz Crosshair XTreme Mini RP-SMA Antenna - Choose Polarization from WREKD Co.

VAS 5.8GHz Crosshair XTreme Mini RP-SMA Antenna - Choose Polarization

FPV’s favorite “patch killer” antenna has gotten smaller. The patented vector-phasing technology of the Crosshair™ Xtreme gives both longer range and better signal clarity. Designed to be a long range/obstacle penetration antenna improvements include increased gain, beamwidth, and bandwidth. Now in a smaller form factor.
Check out all our FPV Receivers &amp Antennas and our selection of VAS products!

 Specifications

Gain: 10dbic

Axial ratio: 0.99 (measured)

Bandwidth: 5300Mhz-6400MHz

Flight beam: 120 degrees

-3db point: +/- 30 degrees
Connector: RP-SMA 

Includes

1x VAS 5.8GHz Crosshair XTreme Mini RP-SMA Antenna - Choose Polarization


VAS 5.8GHz Crosshair XTreme Mini Antenna - SMA

FPV’s favorite “patch killer” antenna has gotten smaller. The patented vector-phasing technology of the Crosshair™ Xtreme gives both longer range and better signal clarity. Designed to be a long range/obstacle penetration antenna improvements include increased gain, beamwidth, and bandwidth. Now in a smaller form factor.
Check out all our FPV Receivers &amp Antennas and our selection of VAS products!

 Specifications

Gain: 10dbic

Axial ratio: 0.99 (measured)

Bandwidth: 5300Mhz-6400MHz

Flight beam: 120 degrees

-3db point: +/- 30 degrees
Connector: SMA 

Includes

1x VAS 5.8GHz Crosshair XTreme Mini SMA Antenna - Choose Polarization


VAS 5.8GHz Crosshair XTreme Mini SMA Antenna - Choose Polarization

FPV’s favorite “patch killer” antenna has gotten smaller. The patented vector-phasing technology of the Crosshair™ Xtreme gives both longer range and better signal clarity. Designed to be a long range/obstacle penetration antenna improvements include increased gain, beamwidth, and bandwidth. Now in a smaller form factor.
Check out all our FPV Receivers &ampamp Antennas and our selection of VAS products!

 Specifications

Gain: 10dbic

Axial ratio: 0.99 (measured)

Bandwidth: 5300Mhz-6400MHz

Flight beam: 120 degrees

-3db point: +/- 30 degrees
Connector: SMA 

Includes

1x VAS 5.8GHz Crosshair XTreme Mini SMA Antenna - Choose Polarization


VAS 5.8GHz Crosshair XTreme Mini SMA Antenna - Choose Polarization from WREKD Co.

MenaceRC

MenaceRC Digital HD 5.8GHz Goggle Receiver Antenna Pack - RP-SMA, LHCP

Experience a superior digital FPV experience with the Menace DigiPack, which includes a pair of our smallest patch antennas with extensions to improve your digital FPV experience straight out of the box. Compatible with DJI&#39s HD, low latency, strong immersion, long-distance transmission, and anti-interference goggles, the antennas can be connected to the two lower ports on the goggles. This will give your Digital FPV System an even better performance, especially in difficult multipath environments. If you got the new Walksnail Goggle X, and are looking for quality antennas then this is the set for you!
Check out all our FPV receiver antennas and modules, and our Menace selection!




Specifications

Frequency Range: 5645 – 5945 Mhz
Gain: 9.4 dBi
Beam Width: 61° at -3db points
Left Hand Circular Polarised (LHCP)
RPsma Connector (Fits DJI FPV Goggles )
Colour: Black
Dimensions Single Antenna: 37.0mm x 33.6mm x 19.2mm
Weight Single Antenna: 10 grams

Includes

1x MenaceRC Digital HD Goggle Pack 5.8GHz Receiver Antenna 2 Pack - RP-SMA - LHCP


Experience a superior digital FPV experience with the Menace DigiPack, which includes a pair of our smallest patch antennas with extensions to improve your digital FPV experience straight out of the box. Compatible with DJI's HD, low latency, strong immersion, long-distance transmission, and anti-interference goggles, 

MenaceRC Digital HD Goggle Pack 5.8GHz Receiver Antenna 2 Pack - RP-SMA - LHCP from WREKD Co.

MenaceRC Digital HD Goggle Pack 5.8GHz Receiver Antenna 2 Pack - RP-SMA - LHCP

MENACERC

Experience a superior digital FPV experience with the Menace DigiPack, which includes a pair of our smallest patch antennas with extensions to improve your digital FPV experience straight out of the box. Compatible with DJI's HD, low latency, strong immersion, long-distance transmission, and anti-interference goggles, the antennas can be connected to the two lower ports on the goggles. This will give your Digital FPV System an even better performance, especially in difficult multipath environments. If you got the new Walksnail Goggle X, and are looking for quality antennas then this is the set for you!
Check out all our FPV receiver antennas and modules, and our Menace selection!




Specifications

Frequency Range: 5645 – 5945 Mhz
Gain: 9.4 dBi
Beam Width: 61° at -3db points
Left Hand Circular Polarised (LHCP)
RPsma Connector (Fits DJI FPV Goggles )
Colour: Black
Dimensions Single Antenna: 37.0mm x 33.6mm x 19.2mm
Weight Single Antenna: 10 grams

Includes

1x MenaceRC Digital HD Goggle Pack 5.8GHz Receiver Antenna 2 Pack - RP-SMA - LHCP


MenaceRC Digital HD Goggle Pack 5.8GHz Receiver Antenna 2 Pack - RP-SM

Walksnail Patch Antenna V2 5.8GHz For Avatar Goggles X - RP-SMA, LHCP

Integrated dual antenna mask for easy installation. Weighs only 32g and is comfortable to wear. Antenna with professional RF substrate. Right-angle SMA-RP connector with rubber handwheel. bandwidth 5600-6000MHz Polarization LHCP Gain 6.7dBi VSWR 1.4 Efficiency 97% Beam-width 127 Connector SMA-RP Weight 9.6g (single ant

Walksnail Patch Antenna V2 For Avatar Goggles X

Quality patch antenna from Walksnail designed for the Goggles X.
Check out all our U.FL VTX antennas and our selection of Walksnail HD products!
Features


Integrated dual antenna mask for easy installation.

It weighs only 32g and is comfortable to wear.

Antenna with professional RF substrate.

Right-angle SMA-RP connector with rubber handwheel.

Specifications

Bandwidth: 5600-6000MHz

Polarization: LHCP

Gain: 6.7dBi

VSWR: &lt1.4

Efficiency: 97%

Beam-width: 127°

Connector: SMA-RP

Weight: 9.6g (single antenna ) 32g (total)

Size: W146mm L35mm H10mm


Includes

1x Walksnail Patch Antenna V2 5.8GHz RP-SMA For Avatar Goggles X - LHCP



Quality patch antenna from Walksnail designed for the Goggles X. Check out all our U.FL VTX antennas and our selection of Walksnail HD products! Features Integrated dual antenna mask for easy installation. It weighs only 32g and is comfortable to wear. Antenna with professional RF substrate. Right-angle SMA-RP connecto

Walksnail Patch Antenna V2 5.8GHz RP-SMA For Avatar Goggles X - LHCP

Increase your range and penetration with these patch antennas for the Walksnail Avatar Goggles X Don't forget to check out the rest of our LHCP FPV Antenna's as well as our Walksnail Products! Features: Integrated dual antenna mask for easy installation. Weighs only 32g and is comfortable to wear. Antenna with professi

Foxeer

Foxeer Lollipop V4 5.8GHz MMCX Antenna

 This is the 4th generation of your all time favorite Foxeer Lollipop antennas.This latest version is even more durable thanks to its new stronger structure and uses gold plating technology that provides better signal. Check out all our Foxeer Lollipop 4 Collection, our FPV Antennas and the rest of our Foxeer Products!

Foxeer 5.8G Lollipop 4 2.6dBi Omni Antenna 2pcs - Straight MMCX RHCP (Choose Color)

Foxeer 5.8G Lollipop 4 2.6dBi Omni Antenna 2pcs - MMCX 60mm LHCP (Choose Color)

The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!
Choose your color preference!Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials 


Specifications

Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: RHCP and LHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: &amplt 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: 6cm
Connection: MMCX

Weight: 4.4g

Includes

2x Foxeer Lollipop V4 5.8GHz MMCX Antenna


The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon! Choose your color preference!Check out all our VTX antennas and our Foxeer Selection! Features Durable Structure Higher gain than previous versions High Qualit

Foxeer Lollipop V4 5.8GHz MMCX Antenna 2 Pack - Choose Version from WREKD Co.

Foxeer Lollipop V4 5.8GHz MMCX Antenna 2 Pack - Choose Version












These amazing 4th gen Foxeer Lollipop antennas have a tougher build and use gold-plated technology, delivering an even better signal! Higher gain, better durability, and more advanced materials. 











Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High-Quality Oxidation Resistant Materials 









Specifications

Center Frequency: 5.7GHz

Gain: 2.6dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.07 at Center Frequency
Polarization: RHCP
Case Material: PC+ABS
Weight: 4.4g

 Includes

1x Foxeer Lollipop V4 5.8GHz MMCX Antenna 2 Pack - RHCP - Black


These amazing 4th gen Foxeer Lollipop antennas have a tougher build and use gold-plated technology, delivering an even better signal! Higher gain, better durability, and more advanced materials.  Check out all our VTX antennas and our Foxeer Selection! Features Durable Structure Higher gain than previous versions High-

Foxeer Lollipop V4 5.8GHz MMCX Antenna 2 Pack - RHCP - Black from WREKD Co.

Foxeer Lollipop V4 5.8GHz MMCX Antenna 2 Pack - RHCP - Black

FOXEER

The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!
Choose your color preference!Check out all our VTX antennas and our Foxeer Selection!
Features

Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials 


Specifications

Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: RHCP and LHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: &lt 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: 6cm
Connection: MMCX

Weight: 4.4g

Includes

2x Foxeer Lollipop V4 5.8GHz MMCX Antenna


Flywoo

Flywoo 1.2GHz-1.3GHz SMA Dipole Linear Antenna

FLYWOO

These 1.2GHz-1.3GHz SMA dipole antennas (2pc) offer reliable and durable performance, providing high-quality linear reception that ensures consistent signals and faster speeds.
Check out our ever-expanding selection of VTX antennas as well as the rest of our Flywoo selection and our FPV Wing Gear!
Specifications

Type: Dipole
Bandwidth: 1.2-1.3Ghz
Center freq 1240MHz
Connector: SMA
Weight: 7g
Length: ~14.4cm
Width: ~8.7cm

Includes

1x Flywoo 1.2GHz-1.3GHz SMA Dipole Antenna (2pc) - Linear


These 1.2GHz-1.3GHz SMA dipole antennas (2pc) offer reliable and durable performance, providing high-quality linear reception that ensures consistent signals and faster speeds. Check out our ever-expanding selection of VTX antennas as well as the rest of our Flywoo selection and our FPV Wing Gear! Specifications Type: 

Flywoo 1.2GHz-1.3GHz SMA Dipole Antenna (2pc) - Linear

These 1.2GHz-1.3GHz SMA dipole antennas (2pc) offer reliable and durable performance, providing high-quality linear reception that ensures consistent signals and faster speeds. Specifications Type: Dipole Bandwidth: 1.2-1.3Ghz Center freq 1240MHz Connector: SMA Weight: 7g Length: ~14.4cm Width: ~8.7cm In the Box 2 x Fl

Flywoo 1.2GHz-1.3GHz SMA Dipole Antenna (2pc) - Linear from WREKD Co.

TrueRC

TrueRC X2-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP

TrueRC X²-AIR 5.8GHz MK II SMA Antenna (RHCP) 

Following on the latest improvement of the X-AIR 5.8 MK II, TrueRX has shrunk down X²-AIR to bring you high gain and wide horizontal beam in a new compact and light package.
Specifications

Bandwidth: 5.1GHz-7.0GHz
Gain: 13 dBic
Beam-width 












Optimize your FPV experience with the TrueRC X2-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP. Following on the latest improvement of the X-AIR 5.8 MK II, the TrueRC X²-AIR  comes with a new compact and light design. This antenna offers high gain and a wide horizontal beam for superior performance. Enjoy improved range and reception with this 5.8GHz SMA antenna.







Check out our ever-expanding selection of VTX antennas and our range of TrueRC gear!












Specifications

Gain: 13 dBic
Beam-width Horizontal: 150deg
Beam-width Vertical: 62deg
Hor. beam @-3dB: 74deg.
Vert. beam @-3dB: 34deg.
Connector: SMA
Polarization: RHCP 
Dimension: 72mmx34mmx22mm
Weight: 16g

Includes

1x TrueRC X²-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP


Optimize your FPV experience with the TrueRC X2-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP. Following on the latest improvement of the X-AIR 5.8 MK II, the TrueRC X²-AIR  comes with a new compact and light design. This antenna offers high gain and a wide horizontal beam for superior performance. Enjoy improved range 

TrueRC X²-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP from WREKD Co.

TrueRC X²-AIR MK II 5.8GHz SMA Receiver Antenna - RHCP

TRUERC

Walksnail Avatar HD VTX V2 U.FL Antenna

Replacement antenna for the Walksnail Avatar VTX
Specifications

Polarization: LHCP
Bandwidth: 5600MHz-6000MHz

Gain: 1.9dBi Average
VSWR: &amplt=1.5
Connector: U.fl
Length: 105mm
Size: R15 X 45mm (without cable）
Weight: 2g

Includes

1x Walksnail Avatar HD VTX U.FL Antenna V2


Upgrade your drone's performance with the Walksnail Avatar HD VTX U.FL Antenna V2. Boost range and quality for an unbeatable flying experience.

Walksnail Avatar HD VTX U.FL Antenna V2 from WREKD Co.

Walksnail Avatar HD VTX U.FL Antenna V2

CADDXFPV

<div style="text-align: left"><img style="float: none" alt="" src="https://cdn.shopify.com/s/files/1/0036/3921/4169/files/582db34c51886c33c855ac0de0eaf7c4.jpg?v=1679276275"></div>
<p>The quality of the antenna is also the punchline during flying. To further improve performance, we have redesigned the antenna. After repeated testing and optimization, the brand new antenna whose performance can almost achieve the effect that originally required two.<br><br>This antenna has been designed with advanced technology and materials to ensure which provides excellent signal reception and transmission in all environments. After testing, it showed significant improvements in signal stability, range, and penetration. This means that drone using this antenna would be lighter, more flexible, and easier to carry and operate. </p>
<table width="100%">
<tbody>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left"><strong>Specification</strong></td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left"> </td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left"><strong>Avatar V2 antenna</strong></td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left"></td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Polarization</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">LHCP</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Frequency range</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">5600MHz-6000MHz</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Gain</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">1.9dBi<br>
</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">VSWR</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">＜1.5</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Input Impedance</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">50Ω</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Interface</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">IPEX-1</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Size</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">R15 X 45mm （without cable）</td>
</tr>
<tr>
<td style="width: 47.4799% text-align: left" data-mce-style="width: 47.4799% text-align: left">Weight</td>
<td style="width: 47.5201% text-align: left" data-mce-style="width: 47.5201% text-align: left">2g</td>
</tr>
</tbody>
</table>

The quality of the antenna is also the punchline during flying. To further improve performance, we have redesigned the antenna. After repeated testing and optimization, the brand new antenna whose performance can almost achieve the effect that originally required two.This antenna has been designed with advanced technol

Walksnail VTX V2 Antenna – CADDX FPV


The quality of the antenna is also the punchline during flying. To further improve performance, we have redesigned the antenna. After repeated testing and optimization, the brand new antenna whose pe

Walksnail VTX V2 Antenna

Replacement antenna for the Walksnail Avatar VTX
Check out all our U.FL VTX antennas and our selection of Walksnail HD products!
Specifications


Polarization: LHCP
Bandwidth: 5600MHz-6000MHz

Gain: 1.9dBi Average
VSWR: &lt=1.5

Connector: U.fl
Length: 105mm
Size: R15 X 45mm (without cable）
Weight: 2g


Includes


1x Walksnail Avatar HD VTX U.FL Antenna V2


Replacement antenna for the Walksnail Avatar VTX Check out all our U.FL VTX antennas and our selection of Walksnail HD products! Specifications Polarization: LHCP Bandwidth: 5600MHz-6000MHz Gain: 1.9dBi Average VSWR: &lt;=1.5 Connector: U.fl Length: 105mm Size: R15 X 45mm (without cable） Weight: 2g Includes 1x Walksnai

Replacement antenna for the Walksnail Avatar VTX
Check out all our U.FL VTX antennas and our selection of Walksnail HD products!
Specifications


Polarization: LHCP
Bandwidth: 5600MHz-6000MHz

Gain: 1.9dBi Average
VSWR: &amplt=1.5

Connector: U.fl
Length: 105mm
Size: R15 X 45mm (without cable）
Weight: 2g


Includes


1x Walksnail Avatar HD VTX U.FL Antenna V2


DJI O3 Air Unit Antenna

Dual-band dual-polarized antenna with strong anti-interference ability and long-distance transmission capability. Equipped with I-PEX connector, small, and lightweight.
Be sure to check out our DJI Collection for all your DJI Air Unit needs!

Specification

Weight: Approx. 3g
Length: 85mm

Includes


1x DJI 03 Air Unit Antenna


Dual-band dual-polarized antenna with strong anti-interference ability and long-distance transmission capability. Equipped with I-PEX connector, small, and lightweight. Be sure to check out our DJI Collection for all your DJI Air Unit needs! Specification Weight: Approx. 3g Length: 85mm Includes 1x DJI 03 Air Unit Ante

DJI O3 Air Unit Antenna from WREKD Co.

The DJI O3 Air Unit Antenna is a dual-band dual-polarized antenna with an I-PEX connector.

#html-body [data-pb-style=XC81418]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=NBLEQ7C]{display:no

DJI O3 Air Unit Antenna 

Summary
The DJI O3 Air Unit Antenna is a dual-band dual-polarized antenna with an I-PEX connector. The O3 antenna is small and lightweight to ensure a long-distance transmission range and strong anti-interference.






Includes


1 x DJI O3 Air Unit Antenna

Summary The DJI O3 Air Unit Antenna is a dual-band dual-polarized antenna with an I-PEX connector. The O3 antenna is small and lightweight to ensure a long-distance transmission range and strong anti-interference. Includes 1 x DJI O3 Air Unit Antenna

DJI O3 Air Unit Antenna - GEPRC

Replacement antenna for the DJI O3 Air Unit. Dual-band dual-polarized antenna with strong anti-interference ability and long-distance transmission capability. Equipped with I-PEX connector, small, and lightweight.
Specifications

Length: 85mm
Weight: 3g

Includes

1x DJI O3 Air Unit Antenna

 

Replacement antenna for the DJI O3 Air Unit. Dual-band dual-polarized antenna with strong anti-interference ability and long-distance transmission capability. Equipped with I-PEX connector, small, and lightweight. Specifications Length: 85mm Weight: 3g Includes 1x DJI O3 Air Unit Antenna  

About this product TheDJI O3 Air Unit Antennais a dual-band dual-polarized antenna with an I-PEX connector. The O3 antenna is small and lightweight to ensure a long-distance transmission range and strong anti-interference. Features Small and lightweight Comes with a I-PEX connector Dual-band dual-polarized polarization

VTX Antenna Connector

The VTX processes the image from your FPV camera and sends it to your goggle’s video receiver (VRX). If you chose as digital video system, you need a VTX that matches the system. Most analog VTXs and VRXs are compatible with each other, and your biggest consideration will be how much output power you need. The more output power, the more range and better signal you’ll get. Learn more about VTXs.