FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

Diatone

Diatone Mamba F65 65A 128K 32Bit 3-6S 30x30 4in1 ESC

DIATONE

Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build.
Check out the rest of our 4in1 ESCs and Diatone gear!
Specifications

Input Voltage: 3~6S Lipo (12.6V~25.2V)
Max Continuous Current: 65A
Max Burst Current: 75A 
BEC: No

Target：BLHeli_32 MAMBA F65_128K

Protocol: Dshot300/600/1200

PWM Range: 24~128K

TVS Protection: Yes
Mounting Pattern: 30x30 M3

Includes

1x Diatone Mamba F65 128K 32Bit 65A 3-6S 30x30 4in1 ESC
2x 8pin sh1.0
1x AMASS XT60
1x High-Frequency 470uF/35V Capacitor


Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone's consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build. Check out the rest of our 4in1 ESCs and Diatone gear! Specifications Input Voltage: 3~6S Lipo (12.6V~25.2V) Max Continuous Current

Diatone Mamba F65 128K 32Bit 65A 3-6S 30x30 4in1 ESC

Get ultra-smooth power performance with the Diatone Mamba F65 128K 32Bit 65A 3-6S 4in1 ESC - 30x30mm. This ESC features 128k high quality, providing maximum power and current with minimal noise. Experience maximum control with a 32-bit processor and 65A current capability. This 4-in-1 ESC is designed to fit 30x30mm fra

Diatone Mamba F65 128K 32Bit 65A 3-6S 4in1 ESC - 30x30mm


Diatone Mamba 128K 3-6S BLHeli_32 4-in-1 ESC - F65 65A
The Diatone Mamba F65 65A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 65A all while bringing you the latest features! This is the 128K version.




About this product


The Diatone Mamba F65 65A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 65A all while bringing you the latest features! This is the 128K version.
Features

128K PWM


 
Specifications

Target：BLHeli_32 MAMBA F65_128K
Input Voltage: 3~6S Lipo 12.6-25.2V
Mounting Pattern: 30.5mm/M3
Protocol: Dshot300/600/1200
Continuous Current: 65A×4
Burst Current: 75A (10S)
BLHeli: BLHeli_Suite32
TVS Protection: Yes
PWM:24~128K
BEC: No

Includes

1x Diatone Mamba 128K 3-6S BLHeli_32 4-in-1 ESC - F65 65A
1x High-Frequency 470uF/35V Capacitor
1x AMASS Original XT60
5x Hard Dampers
5x Soft Dampers
2x 8pin sh1.0
10x O-Rings







Diatone Mamba 128K 3-6S BLHeli_32 4-in-1 ESC - F65 65A The Diatone Mamba F65 65A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 65A all while bringing you the latest features! This is the 128K version. About this product The Diatone Mamba F65 65A ESC brings BIG power all in a 30.5x30.5 mountin

Diatone Mamba 128K 3-6S BLHeli_32 4-in-1 ESC - F65 65A

The Diatone Mamba F65 65A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 65A all while bringing you the latest features! This is the 128K version.

The Diatone Mamba F65 65A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 65A all while bringing you the latest features! This is the 128K version.
Features

128K PWM



Specifications

Target：BLHeli_32 M

DiatoneUSA

Diatone takes a shot at the new trend of ultra smooth 128k ESCs. Diatone&#39s consistent quality and performance make this a great option for those looking to experiment with a 128k ESC build.
Check out the rest of our 4in1 ESCs and Diatone gear!
Specifications

Input Voltage: 3~6S Lipo (12.6V~25.2V)
Max Continuous Current: 65A
Max Burst Current: 75A 
BEC: No

Target：BLHeli_32 MAMBA F65_128K

Protocol: Dshot300/600/1200

PWM Range: 24~128K

TVS Protection: Yes
Mounting Pattern: 30x30 M3

Includes

1x Diatone Mamba F65 128K 32Bit 65A 3-6S 30x30 4in1 ESC
2x 8pin sh1.0
1x AMASS XT60
1x High-Frequency 470uF/35V Capacitor


Diatone Mamba F65 128K 32Bit 65A 3-6S 30x30 4in1 ESC from WREKD Co.

Single / 4-in-1 ESC

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

ESC Stack Mount

Firmware

Minimum Voltage

Maximum Voltage

Diatone Mamba F45 45A 128K 32Bit 3-6S 30x30 4in1 ESC

The Diatone Mamba F45 45A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 45A all while bringing you the latest features! This is the 128K version.

The Diatone Mamba F45 45A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 45A all while bringing you the latest features! This is the 128K version.
Features

128K PWM




Specifications

Target：BLHeli_32

Diatone Mamba 128K 3-6S BLHeli_32 4-in-1 ESC - F45 45A

128K is the next big thing in speed controllers and this is Diatone's answer to the new Hype! Check out all our 30x30 4in1 ESCs and our wide collection of Diatone products! Specifications: INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V) CONTINUE CURRENT:45A×4 BURST CURRENT:55A (10S) BEC: No Target：BLHeli_32 MAMBA F45_128K SOFT:

Diatone MAMBA F45_128K BL32 4IN1 ESC 45A 6S - 30x30mm


Diatone Mamba 128K 3-6S BLHeli_32 4-in-1 ESC - F45 45A
The Diatone Mamba F45 45A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 45A all while bringing you the latest features! This is the 128K version.




About this product


The Diatone Mamba F45 45A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 45A all while bringing you the latest features! This is the 128K version.
Features

128K PWM

 

 
Specifications

Target：BLHeli_32 MAMBA F45_128K
Input Voltage: 3~6S Lipo 12.6-25.2V
Mounting Pattern: 30.5mm/M3
Protocol: Dshot300/600/1200
Continuous Current: 45A×4
Burst Current: 55A (10S)
BLHeli: BLHeli_Suite32
TVS Protection: Yes
PWM:24~128K
BEC: No

Includes

1x Diatone Mamba 128K 3-6S BLHeli_32 4-in-1 ESC - F45 45A
1x High-Frequency 470uF/35V Capacitor
1x AMASS Original XT60
5x Hard Dampers
5x Soft Dampers
2x 8pin sh1.0
10x O-Rings







Diatone Mamba 128K 3-6S BLHeli_32 4-in-1 ESC - F45 45A The Diatone Mamba F45 45A ESC brings BIG power all in a 30.5x30.5 mounting size! This ESC can push 45A all while bringing you the latest features! This is the 128K version. About this product The Diatone Mamba F45 45A ESC brings BIG power all in a 30.5x30.5 mountin

Foxeer

Foxeer Reaper 65A 128K 32Bit 3-8S 30x30 4in1 ESC

The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out all our 30x30mm Electronic Speed Controllers and the rest of our Foxeer Products! Specifications Input Voltage: 3-8S LiPo

Foxeer Reaper F4 128K 32Bit 65A 3-8S 4in1 ESC - 30x30mm

FOXEER

The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs.
Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings!
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 

Telemetry: Yes

Firmware: BLHeli_32

Target: FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Pattern: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC

Wiring Diagram


The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings! Specifications Input Voltage: 3-8S LiPo Max. Con

Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC






Firmware

FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9


Continuous /Burst Current
65A*4 / 100A*4


Input Voltage
DC 9V~40V (3-8S Lipo)



BEC

No



Telemetry

Supported



ESC Programming

BLHeli32



Input Signal

DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc.


Working Temperature
-20℃ ~ +55℃


Working Humidity
20～95%


Storage Temperature
-20℃ ~ +70℃


Mounting Hole
30.5X30.5mm,Φ4mm/M3


Dimension
42.5x42x5.5mm


Weight

14.8g




 











Firmware FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9 Continuous /Burst Current 65A*4 / 100A*4 Input Voltage DC 9V~40V (3-8S Lipo) BEC No Telemetry Supported ESC Programming BLHeli32 Input Signal DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature -20℃ ~ +55℃ Working Humidity 20～95% Storage Temperature -2

Foxeer Reaper F4 128K 65A BL32 4in1 ESC 3-8s

WREKD is a family-owned & operated, leading online FPV super-store based in the United States specializing in FPV racing / freestyle / tiny / micro whoop drones, parts, gear, and accessories. We offer fast, domestic, same-day shipping with the quickest delivery to anywhere in the U.S.A.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 4in1 ESC - 30x30mm from WREKD Co.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC from WREKD Co.

The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp TunedPairs best with the Foxeer F722 V2 Flight controller
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 


Firmware: BLheli_32

Target: FOXEER_Reaper4IN1_65A_128_Multi_32_8
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Dimensions: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC
1x AMASS XT60H Pigtail
1x 560uf 35V Capacitor



The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp; TunedPairs best with the Foxeer F722 V2 Flight controller Specifications I

Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC

The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp; TunedPairs best with the Foxeer F722 V2 Flight controller
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 


Firmware: BLheli_32

Target: FOXEER_Reaper4IN1_65A_128_Multi_32_8
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Dimensions: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC
1x AMASS XT60H Pigtail
1x 560uf 35V Capacitor



Hobbywing

Hobbywing XRotor Micro 32Bit 40A 4-6S 20x20 4in1 ESC

The Xrotor 40A 4-in-1 ESC features a high-performance 32-bit microprocessor with a running frequency of up to 48MHz for an excellent performance.

The Hobbywing XRotor 40A 3-6S 4-in-1 BLHeli_32 is a high power equipped ESC. Featuring high-performance 32-bit microprocessor with a running frequency of up to 48MHz for an excellent performance. The XRotor 40A will surely be one of the premier 

Hobbywing XRotor Micro 40A 3-6S 4-in-1 BLHeli_32 ESC

The Hobbywing Xrotor Micro 40A 20x20 3-6S 4 in 1 ESC Dshot1200. A powerful ESC with 32bit BLHeli capabilities. Tons of power, with reliable performance.
Highly Integrated yet Compact 




High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environment
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.






 




 Model

XRotor 40A 4in1 (20x20) BLHeli-32 DShot1200



SKU

30902045


Application
FPVs with 130-280mm Diagonal Wheelbase


LiPo Power input
3S-6S



Cont.Current

40Ax4


Burst Current
60Ax4


BEC Output

NO



Input wires
Red-14AWG-100mm/ Black-14AWG-100mm


Output Wire
No wires but solder tabs


Connectors(In/Out)
XT60 plug enclosed with package.


Weight / Size
12g / 40x33x5mm


Firmware
Hobbywing_XRotor_BLHeli-32 Version






Throttle Calibration
Supported


ESC Programming
Stick Programming, BLHeliSuite32


DEO
Supported


OneShot Mode
Supported


Timing
Supported


Motor Rotation
Supported 





Warranty note


HOBBYWING products purchased from Hong Kong / Chinese retailers do not confirm CE / North America regulation - deems products non-warranty
Discount /auction stores such as eBay, etc are considered "non-authorized stores" in North America. Products deem non-warranty





Download

 Manual Download


The Hobbywing Xrotor Micro 40A 20x20 3-6S 4 in 1 ESC Dshot1200. A powerful ESC with 32bit BLHeli capabilities. Tons of power, with reliable performance. Highly Integrated yet Compact  High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance. BLHeli_32 firmware is the th

XRotor 40A 4in1 (20x20) 3-6S BLHeli-32 DShot1200

Hobbywing XRotor Micro 32Bit 60A 4-6S 30x30 4in1 ESC w/ BEC

Hobbywing XRotor Micro 60A 6S 4-in-1 BLHeli32 ESC

Hobbywing's XRotor 60A 4-in-1 ESC raises the bar for ESCs. Hobbywing electronics are rock solid and the 60A ESC is no exception. Extra focus was put into this ESC to make it extremely reliable for any setup you are running.
The 60A Micro 4-in-1 ESC 

The Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200. A powerful ESC with 32bit BLHeli capabilities. Tons of power, with reliable performance.
Features

High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
On board 10V &amp5V BEC , powering different accessories such as FC , VTX ,Camera and LED lights and etc. 

Specifications




Model

XRotor Micro 60A 4in1 BLHeli32 6S



SKU

30902090


Application
FPVs with 130-280mm Diagonal Wheelbase


LiPo Power input
3S-6S



Cont.Current

60Ax4


Burst Current
80Ax4


BEC Output

5V@1.5A / 10V@1.5A



Input wires
12AWG-130mm* (Red/Black)


Output Wire
No wires but solder tabs


Connectors(In/Out)
XT60 (w/ Wires Soldered on) /no 


Weight / Size
15.0g / 32.7x18.4x6.2mm


Mounting holes
30.5x30.5mm






Throttle Calibration
Supported


ESC Programming
BLHeliSuite32


DEO
Supported


OneShot Mode
Supported


Timing
Supported


Motor Rotation
Supported



* Note: All the wire length above is the original length, not the length you see from the outside. 

Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200 | The Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200. A powerful ESC with 32bit BLHeli capabilities. Tons of power, with reliable performance.FeaturesHigh performance 32-bit microprocessor with the ru

Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200

Hobbywing Xrotor Micro 60A 6S 4 in 1 ESC Dshot1200 | Hobbywing

EMAX

EMAX F4 Magnum II 35A 3-6S 32Bit 4in1 ESC

EMAX F4 Magnum II - 4in1 ESC 45amp 3-6s BlHeli 32 Dshot 1200 Replacement part for Buzz Freestyle quadcopter.

EMAX F4 Magnum II - 4in1 ESC 35amp 3-6s BlHeli 32 Dshot 1200

Emax USA

Replacement part for Buzz Freestyle quadcopter.
l Continuous current 35A ( max burst 40A)
l Supply voltage 3-6S Lipo
l STM32F051K6U6 MCU
l BLHeli_32 firmware,support DSHOT,MULTISHOT,ONESHOT125
l Top quality MOSFET
l 3oz high TG PCB board
l 32x37mm board with 20mm mounting holes.


Please refer to the Buzz owner manual for additional information. 

Replacement part for Buzz Freestyle quadcopter. l Continuous current 35A ( max burst 40A) l Supply voltage 3-6S Lipo l STM32F051K6U6 MCU l BLHeli_32 firmware,support DSHOT,MULTISHOT,ONESHOT125 l Top quality MOSFET l 3oz high TG PCB board l 32x37mm board with 20mm mounting holes. Please refer to the Buzz owner manual fo

EMAX F4 Magnum II - 4in1 ESC 35amp 3-6s BlHeli 32 Dshot 1200 from WREKD Co.

T-Motor

T-Motor C80A 80A 5-12S Single ESC

 Introducing the C80A Professional Film and Video ESC - Your Ultimate Powerhouse Check out all our Electronic Speed Controllers and the rest of our T-Motor Products! Features: 12S Support: Elevate your film and video projects with the C80A ESC's support for up to 12S battery configurations. Extended 80A Continuous Oper

T-Motor C80A 80A 5-12S Single Cinematic Electronic Speed Controller

T-Motor VELOX V50A SE 32Bit 4in1 ESC

TMOTOR














T-Motor V50A SE 50A 32bit 3-6S ESC is the perfect solution for powerful and efficient flights. With its 32-bit processor, 3-6S input power, and 30x30mm size, this ESC is designed to give you solid flight performance. Reliable, secure, and efficient - this ESC is engineered to help you maximize your time in the sky.













Check out the 30x30 4in1 ESCs and all our T-Motor products!

Specification

MCU: AT32F421

Input Voltage: 3-6S

Current: 50A

Peak Current(5S): 60A

Size: 41x44.4x5.8mm

Mounting Holes: 30.5x30.5/Φ4mm
Weight: 12.3g

Includes

1x T-Motor V50A SE 50A 32Bit 3-6S 30x30 4in1 ESC


T-Motor V50A SE 50A 32bit 3-6S ESC is the perfect solution for powerful and efficient flights. With its 32-bit processor, 3-6S input power, and 30x30mm size, this ESC is designed to give you solid flight performance. Reliable, secure, and efficient - this ESC is engineered to help you maximize your time in the sky. Che

T-Motor V50A SE 50A F4 32Bit 3-6S 30x30 4in1 ESC

The T-Motor Velox V50A SE 4-In-1 is a high-performance ESC from one of the best manufacturers in the hobby. With higher quality MOSFETS, large solder pads and more features, this is certainly a worthy upgrade. Check out our other Electronic Speed Controllers and all the T-Motor Products! Collection. Specifications: Mod

T-Motor Velox V50A SE 6S BLheli-32 4IN1 ESC - 30x30mm

T-Motor Hobby

T-Motor V50A SE 50A F4 32Bit 3-6S 30x30 4in1 ESC from WREKD Co.

JHEMCU

JHEMCU 45A 3-6S 32Bit 30x30 4in1 ESC

JHEMCU BL32 45A 3-6S 4in1 ESC - 30x30mm Check out all our 30x30mm Electronic Speed Controllers and the rest of our JHEMCU Products!   Specifications: Input Power 3-6S(11-27V) Current: 45A BEC:NO Instal Hole:30.5*30.5*M4 Size”44*43MM Firmware:BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX Weight:15.4g Package Includes: 1 x JHEMC

JHEMCU BL32 45A 3-6S 4in1 ESC - 30x30mm

FPVELITE














Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 45 amps. Get ready for smooth, rapid response and precise control.













Check out all our 30x30 ESCs, and the rest of our JHEMCU selection!

Specifications

Input Power: 3-6S(11-27V)

Current: 45A

BEC: NO

Instal Hole: 30.5x30.5xM4

Size: 44x43MM

Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX

Weight: 15.4g

Includes

1x JHEMCU BL32 32Bit 45A 3-6S 4in1 ESC 




Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 45 amps. Get ready for smooth, rapid response and precise control. Check out all our 30x30 ESCs, and the rest of our JHEMCU selection! Specifications Input Power: 3-6S(11-27V) C

JHEMCU BL32 32Bit 45A 3-6S 30x30 4in1 ESC

WREKD General

             Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 45 amps. Get ready for smooth, rapid response and precise control.              Check out all our 30x30 ESCs, and the rest of our JHEMCU selection!  Specifications  Input Power: 3-6S(11-27V)  Current: 45A  BEC: NO  Instal Hole: 30.5x30.5xM4  Size: 44x43MM  Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX  Weight: 15.4g  Includes  1x JHEMCU BL32 32Bit 45A 3-6S 4in1 ESC    

JHEMCU BL32 32Bit 45A 3-6S 30x30 4in1 ESC from WREKD Co.

JHEMCU 60A 3-6S 32Bit 30x30 4in1 ESC

JHEMCU BL32 60A 3-6S 4in1 ESC - 30x30mm Check out all our 30x30mm Electronic Speed Controllers and the rest of our JHEMCU Products!   Specifications: Input Power 3-6S(11-27V) Current: 60A BEC:NO Instal Hole:30.5*30.5*M4 Size”44*43MM Firmware:BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX Weight:15.4g Package Includes: 1 x JHEMC

JHEMCU BL32 60A 3-6S 4in1 ESC - 30x30mm

             Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 60 amps. Get ready for smooth, rapid response and precise control.              Check out all our 30x30 ESCs, and the rest of our JHEMCU selection!  Specifications  Input Power: 3-6S(11-27V)  Current: 60A  BEC: NO  Instal Hole: 30.5x30.5xM4  Size: 44x43MM  Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX  Weight: 15.4g  Includes  1x JHEMCU BL32 32Bit 60A 3-6S 4in1 ESC   

Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 60 amps. Get ready for smooth, rapid response and precise control. Check out all our 30x30 ESCs, and the rest of our JHEMCU selection! Specifications Input Power: 3-6S(11-27V) C

JHEMCU BL32 32Bit 60A 3-6S 30x30 4in1 ESC from WREKD Co.

JHEMCU BL32 32Bit 60A 3-6S 30x30 4in1 ESC














Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 60 amps. Get ready for smooth, rapid response and precise control.













Check out all our 30x30 ESCs, and the rest of our JHEMCU selection!

Specifications

Input Power: 3-6S(11-27V)

Current: 60A

BEC: NO

Instal Hole: 30.5x30.5xM4

Size: 44x43MM

Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX

Weight: 15.4g

Includes

1x JHEMCU BL32 32Bit 60A 3-6S 4in1 ESC




Skystars

Skystars Uranus 35A F4 128KHz 32Bit 3-6S Single ESC

Skystars Uraunus 35A is a standalone ESC suitable for use on airplanes or freestyle drones. The regulator supports power supply of 3-6S batteries and can handle current up to 35A. The control is handled by a powerful 32-bit processor with BlHeli_32 firmware, which supports PWM frequency up to 128KHz ensuring smooth mot

Skystars Uranus F4 128KHz BLHeli_32 35A 3-6S Individual ESC

Top of the line Individual ESC brought to you by SkyStarsRC, working with 35 Amps, 128K PWM motor frequency, and has an F4 processor, all contributing to smooth and reliable operation when using this single ESC. 
Check out our Individual ESC selection, and our SkyStarsRC collection!
Specifications


Con.Current: 35A

Input voltage: 3-6S

ESC Type: Blheli_32 F4 128K

40V mosfet

Demiensions: 28.5x14.3x5.6mm

10g, including cables


Includes

1x SkyStarsRC F4 128K 32Bit Individual 35A ESC



Top of the line Individual ESC brought to you by SkyStarsRC, working with 35 Amps, 128K PWM motor frequency, and has an F4 processor, all contributing to smooth and reliable operation when using this single ESC.  Check out our Individual ESC selection, and our SkyStarsRC collection! Specifications Con.Current: 35A Inpu

SkyStarsRC Uranus F4 128K 32Bit Individual 35A ESC from WREKD Co.

SkyStarsRC Uranus F4 128K 32Bit Individual 35A ESC

Skystars MVP60 60A F4 32Bit 3-6S 4in1 ESC

Skystars MVP60 is a powerful ESC designed for racing and freestyle 5" drones. The ESC supports 3-6S Lipo batteries and can handle current up to 60A (80A peak). With a 32-bit processor, it uses BlHeli_32 firmware that supports telemetry, bidirectional DShot and PWM frequency up to 128KHz. The ESC has a 20x20mm mounting 

Skystars MVP60A F4 BLHeli_32 60A 3-6S 4-in-1 ESC - 20x20mm













SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC has great performance with a maximum current of 60A and a peak current of 80A. This ESC is powerful and reliable, and ideal for use in any 3-6S 20x20 setup. Get ready for a smooth and efficient flying experience! This board has support for a PWM frequency of 128K and comes with an F4 processor for incredibly smooth usage. 












Check out the rest of our 20x20 ESCs, and our SkystarsRC collection!
Specifications

Input voltage: 3-6S LiPo

Con.Current: 60A

Peak Current: 80A≥ 10S

Firmware: BLHeli_32

Support: Dshot 600/1200

Mounting hole : 20X20 mm/M3

BEC: No

Product size: 35.8x47x6.5mm

Weight: 17g


Includes

1x SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC



SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC has great performance with a maximum current of 60A and a peak current of 80A. This ESC is powerful and reliable, and ideal for use in any 3-6S 20x20 setup. Get ready for a smooth and efficient flying experience! This board has support for a PWM frequency of 128K a

SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC from WREKD Co.

SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC

Skystars KM65 65A 32Bit F4 128KHz 3-6S 4in1 ESC

SKYSTARSRC













SkyStarsRC KM65 F4 128K 32Bit 65A 3-6S 30x30 4in1 ESC has great performance with a maximum current of 65A and a peak current of 90A. This ESC is powerful and reliable and ideal for use in any 3-6S 30x30 setup. Get ready for a smooth and efficient flying experience! This board has support for a PWM frequency of 128K and comes with an F4 processor for incredibly smooth usage. This ESC also features a heatsink designed to distribute heat evenly. If there's an ESC you're going to go with for racing, then this is it!












Check out all our 30x30 ESCs and our SkystarsRC collection!
Specifications

Input voltage: 3-6S LiPo

Con. Current: 65A

Peak Current: 90A≥ 10S

Firmware: BLHeli_32

Support: Dshot 600/1200

Mounting hole: 30.5mm/M3

BEC: No

Product size: 45.6x45x7.6mm

Weight: 19g

Includes

1x SkyStarsRC KM65 F4 128K 32Bit 65A 3-6S 30x30 4in1 ESC


SkyStarsRC KM65 F4 128K 32Bit 65A 3-6S 30x30 4in1 ESC has great performance with a maximum current of 65A and a peak current of 90A. This ESC is powerful and reliable and ideal for use in any 3-6S 30x30 setup. Get ready for a smooth and efficient flying experience! This board has support for a PWM frequency of 128K and

SkyStarsRC KM65 F4 128K 32Bit 65A 3-6S 30x30 4in1 ESC













SkyStarsRC KM65 F4 128K 32Bit 65A 3-6S 30x30 4in1 ESC has great performance with a maximum current of 65A and a peak current of 90A. This ESC is powerful and reliable and ideal for use in any 3-6S 30x30 setup. Get ready for a smooth and efficient flying experience! This board has support for a PWM frequency of 128K and comes with an F4 processor for incredibly smooth usage. This ESC also features a heatsink designed to distribute heat evenly. If there&#39s an ESC you&#39re going to go with for racing, then this is it!












Check out all our 30x30 ESCs and our SkystarsRC collection!
Specifications

Input voltage: 3-6S LiPo

Con. Current: 65A

Peak Current: 90A≥ 10S

Firmware: BLHeli_32

Support: Dshot 600/1200

Mounting hole: 30.5mm/M3

BEC: No

Product size: 45.6x45x7.6mm

Weight: 19g

Includes

1x SkyStarsRC KM65 F4 128K 32Bit 65A 3-6S 30x30 4in1 ESC


SkyStarsRC KM65 F4 128K 32Bit 65A 3-6S 30x30 4in1 ESC from WREKD Co.

Skystars KM65 is a powerful ESC for 5-8" freestyle and long-range drones. The ESC supports 3-6S batteries and current up to 65A, which makes it suitable for motors sizes 2207-2808. The ESC has an aluminum heat sink on it to help dissipate heat better while protecting sensitive components from mechanical damage. It can 

Skystars KM65 Blheli_32 F4 128KHz 65A 3-6S 4-in-1 ESC - 30 x 30mm

SpeedyBee

SpeedyBee 55A 3-6S 4in1 ESC

speeRuncA powerful 55A 4-in-1 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for durable build and smooth flight.   We also carry the F405 V4 FC and the F405 V4 Stack individually! Check out all our 30x30mm ESCs and the 

SpeedyBee 55A 3-6S BLS 4in1 ESC - 30x30mm

Richer features, unbelievable price!












The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight.
Interested in the SpeedyBee F405 V4  BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 55A 4in1 ESC)?
Interested in the SpeedyBee F405 V4 3-6S 30x30 Flight Controller?
Check out all our 30x30 ESCs, and all our Speedy Bee products!












Features

User manual
ESC upgraded to 55A (70A burst) with heat sink 

Dual gyroscope power supply filtering 
1000uF huge filtering capacitor 
Large soldering pads








































Specifications

SpeedyBee BLS 55A 30x30 4-in-1 ESC

Firmware: BLHeli_S J-H-40

Wireless Configuration: Full Configuration Supported in the SpeedyBee app

PC Configurator Download Link: https://esc-configurator.com/
Continuous Current: 55A x 4
Burst Current: 70(10 seconds)
TVS Protective diode: Yes
External Capacitor: 1000uF Low ESR Capacitor(In the package)
ESC Protocol: DSHOT300/600
Power Input: 3-6S LiPo
Power Output: VBAT
Current Sensor: Support (Scale=400 Offset=0)
ESC Telemetry: Not supported
Mounting: 30.5 x 30.5mm( 4mm hole diameter)
Dimension: 45.6(L) x 44(W) x 8mm(H)
Weight: 23.5g

Includes

1x SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC


 Wiring Diagram



Richer features, unbelievable price! The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight. Interested in the SpeedyBee F405 V4  BLS 3-6S 30x30 Sta

SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC from WREKD Co.

SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC

Foxeer Reaper 80A F4 128K 32Bit 4-8S Single ESC

The Foxeer Reaper 80A F4 128K BL32 4-8S Single ESC is the next evolution of the Reaper ESC series. Thanks to the F4 processor, low heat generation, high-quality mosfets and excellent layout, this new version has a smoother flight performance and consistent power delivery. Check out all our Electronic Speed Controllers,

Foxeer Reaper 80A F4 128K BL32 4-8S Single ESC

T-Motor F55A Pro III 3-8S 32Bit 4in1 ESC












T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won&#39t fail when compared to cheaper options. 











Check out all our 30x30 ESCs and all our T-Motor products!








Specifications

Voltage: 3-8S Lipo
Current: 4x55A
Peak Current: 4x65A

Firmware: Firmware: BLHELI_32
Telemetry: Support
BEC: No
Size: 44x40x7.5mm
Weight: 17.8g (Including Heatsink)Mounting Hole: 30.5x30.5mm/M3
Support Wide PWM Frequency: 16-128KHZ
Amperage Meter: 200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
1x 12AWG-130MM with XT60 Soldered input wires

2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor


T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won't fail when compared to cheap

T-Motor F55A Pro III 128K 32Bit 55A 3-8S 30x30 4in1 ESC from WREKD Co.

T-Motor F55A Pro III 128K 32Bit 55A 3-8S 30x30 4in1 ESC

The new T-Motor's updated F55A Pro III, the MCU F3 is a much faster ESC with high performance for demanding racing events. Just like the original, The F3 is fully capable of pushing 8s with 65A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firm

T-Motor F55A PROIII 3S-8S BLHeli32 4IN1 ESC - 30x30mm












T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won't fail when compared to cheaper options. 











Check out all our 30x30 ESCs and all our T-Motor products!








Specifications

Voltage: 3-8S Lipo
Current: 4x55A
Peak Current: 4x65A

Firmware: Firmware: BLHELI_32
Telemetry: Support
BEC: No
Size: 44x40x7.5mm
Weight: 17.8g (Including Heatsink)Mounting Hole: 30.5x30.5mm/M3
Support Wide PWM Frequency: 16-128KHZ
Amperage Meter: 200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
1x 12AWG-130MM with XT60 Soldered input wires

2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor


Diatone Mamba 5 Reactor 44A 32Bit 4in1 ESC












Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor. 











Check out all our 20x20 ESCs and all our Diatone Gear!
Specification

Input voltage: 4~6S Lipo (16.8V~25.2V)
Continue Current: 44A×4
Burst current: 54A (10S)
BEC: No
Target： BLHeli_32 MAMBA5_Reactor_44
SOFT: DSHOT300/600/1200/MAX2400（FETTEC）
PWM: 24~128K
Mounting size: 20mm, M2

Includes

1x Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC
2x 8pin sh1.0 
1x AMASS Original XT60 
1x High Frequency 470uF/35V 


Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor.  Check out all our 20x20 ESCs and all 

Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC

Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC from WREKD Co.

Experience reliable power with the Diatone Mamba 5 Reactor 32Bit 44A 4-6S 20x20 4in1 ESC. This advanced ESC is designed to provide you with precise and smooth control for your quadcopter. Enjoy a responsive feel and the responsiveness of your craft, thanks to its 32-bit processor.  Check out all our 20x20 4in1 ESCs and

Diatone MAMBA 5 Reactor 44 ESC BL32 4IN1 ESC 44A 6S - 20x20mm

SpeedyBee 50A 8Bit 3-6S 30x30 4in1 ESC

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor. 
Check out all our 30x30 ESCs and all our Speedy Bee products!
Specifications

BLS 50A 3-6S 4in1 ESC

Firmware: SpeedyBee BLS 50A

Continuous Current: 50Ax4

Burst Current: 55A(5S)
Power input: 3S - 6S LiPo

Power output: VBAT

Current Sensor: Supported (Scale=386 Offset=0)

Mounting: 30.5x0.5mm, 4mm hole size

Dimension: 45.6(L)x44(W)x6.1mm(H)

Weight: 13.8g with heat sink


Includes

1x BLS 50A 4in1 ESC
1x 35V 1500uF low ESR capacitor
5x Silicone O-ring M3
1x XT60 70mm power cable
1x SH1.0mm 8pin 30mm Cable
5x Silicone grommet M3*8.1mm

Wiring diagram


The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor.  Check out all our 30x30 ESCs and all our Speedy Be

SpeedyBee BLS 8Bit 50A 3-6S 30x30 4in1 ESC from WREKD Co.

SpeedyBee BLS 8Bit 50A 3-6S 30x30 4in1 ESC

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor.  We also carry the F405 V3 Stack!  Check out all ou

SpeedyBee BLS 8Bit 50A 3-6S 4in1 ESC - 30x30mm

RUNCAM

The SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC isn't just built for convenience, it is built for the performance that will fulfill all of your in flight needs. Choose the top ESC today!

SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC For Sale

T-Motor Cine55A 55A 32Bit 3-8S 30X30 8-in-1 ESC

The T-Motor Cine 55A BLHeli_32 8-In-1 3-8S ESC (30X30). This ESC is perfect for large Cinelifters running 8 motors and up to 8S voltage! This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESCs. Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC and FC can connect with just one wire harness!
 Check out our other ESCs and the rest of the T-Motor line-up!
Features

Perfect for large Cinelifters running 8 motors and up to 8S voltage
Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC and FC can connect with just one wire harness
48 full-size imported MOs on board
Doubled-sized matte black heatsink
118 filtering capacitors on board
External dual capacitor pad
Extended telemetry transmission








Specifications

Rated Current: 8x55A
Peak Current: 8x65A
Input Voltage: 3-8s
Weight: 64g
Dimensions: 95.2x53x8.2mm
Amperage Meter Scale: 100
PWM frequency: 16-128K 
Mounting holes: 30.5x30.5 M3


Includes

1x T-Motor Cine-55A 32Bit 55A 3-8S 30x30 8in1 ESC
1x 200mm 10AWG XT60 Power Cable
8x Short silicone shock-absorbing washer
8x Long silicone shock-absorbing washer
2x SH1.0-8P connectors
2x SH1.0-10P connectors
1x Double-sided SH1.0 FC connector hardness
1x Single-sided SH1.0 FC connector hardness
2x Capacitor
1x QC PASS Card
2x Stickers


The T-Motor Cine 55A BLHeli_32 8-In-1 3-8S ESC (30X30). This ESC is perfect for large Cinelifters running 8 motors and up to 8S voltage! This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESCs. Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC an

T-Motor Cine-55A 32Bit 55A 3-8S 30x30 8in1 ESC

Introducing T-Motors new 30x30mm 8-in-1 ESC. Perfect for large Cinelifter's running 8 motors and up to 8S voltage. This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESC's. Combine this ESC with the T-Motor F7 Pro flight controller and wiring is even easier as the ESC and FC can connect with j

T-Motor Cine55A 55A 8-in-1 BLHeli_32 ESC 3-8S - 30x30mm

Foxeer Reaper Mini F4 Slim 128K 32Bit 60A 3-8S 20x20 4in1 ESC

Foxeer Reaper F4 Slim Mini ESC 128K 60A BL32 4in1 9~40V 20mm M3 | Five33

Foxeer Reaper F4 Slim Mini ESC 128K 60A BL32 4in1 9~40V 20mm M3

The Foxeer Slim Mini F4 Reaper 128K is the next evolution of the Reaper ESC series. Thanks to the F4 processor, low heat generation, high-quality mosfets and excellent layout, this new version has a smoother flight performence and consistent power delivery. Check out all our 20x20 Electronic Speed Controllers, and the 

Foxeer Slim Mini Reaper F4 128K 32Bit 60A 3-8S 4in1 ESC - 20x20

Frame Stack Mount

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 