FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

Continuous Amp Rating

T-Motor

T-Motor C80A 80A 5-12S Single ESC

 Introducing the C80A Professional Film and Video ESC - Your Ultimate Powerhouse Check out all our Electronic Speed Controllers and the rest of our T-Motor Products! Features: 12S Support: Elevate your film and video projects with the C80A ESC's support for up to 12S battery configurations. Extended 80A Continuous Oper

T-Motor C80A 80A 5-12S Single Cinematic Electronic Speed Controller

Single / 4-in-1 ESC

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

ESC Stack Mount

Firmware

Minimum Voltage

Maximum Voltage

T-Motor VELOX V50A SE 32Bit 4in1 ESC

The T-Motor Velox V50A SE 4-In-1 is a high-performance ESC from one of the best manufacturers in the hobby. With higher quality MOSFETS, large solder pads and more features, this is certainly a worthy upgrade. Check out our other Electronic Speed Controllers and all the T-Motor Products! Collection. Specifications: Mod

T-Motor Velox V50A SE 6S BLheli-32 4IN1 ESC - 30x30mm

TMOTOR














T-Motor V50A SE 50A 32bit 3-6S ESC is the perfect solution for powerful and efficient flights. With its 32-bit processor, 3-6S input power, and 30x30mm size, this ESC is designed to give you solid flight performance. Reliable, secure, and efficient - this ESC is engineered to help you maximize your time in the sky.













Check out the 30x30 4in1 ESCs and all our T-Motor products!

Specification

MCU: AT32F421

Input Voltage: 3-6S

Current: 50A

Peak Current(5S): 60A

Size: 41x44.4x5.8mm

Mounting Holes: 30.5x30.5/Φ4mm
Weight: 12.3g

Includes

1x T-Motor V50A SE 50A 32Bit 3-6S 30x30 4in1 ESC


T-Motor V50A SE 50A 32bit 3-6S ESC is the perfect solution for powerful and efficient flights. With its 32-bit processor, 3-6S input power, and 30x30mm size, this ESC is designed to give you solid flight performance. Reliable, secure, and efficient - this ESC is engineered to help you maximize your time in the sky. Che

T-Motor V50A SE 50A F4 32Bit 3-6S 30x30 4in1 ESC

Tiger Motors

Introducing the T-Motor Velox V50A SE 6S BLHeli_32 4-in-1 ESC, the pinnacle of electronic speed controllers for high-performance drones. 

T-Motor Velox V50A SE 6S BLHeli_32 4-in-1 ESC

T-Motor Hobby

T-Motor V50A SE 50A F4 32Bit 3-6S 30x30 4in1 ESC from WREKD Co.

T-Motor VELOX V50A-SE 3-6S BLHeli_32 4-in-1 ESCIntroducing the T-Motor Velox V50A SE 6S BLHeli_32 4-in-1 ESC, the pinnacle of electronic speed controllers for high-performance drones. Designed for seamless integration and maximum efficiency, this ESC boasts a robust 6S capability, ensuring optimal power delivery for your drone&#39s performance needs. With BLHeli_32 firmware, it offers advanced features and customization options for precise control and responsiveness. Experience smooth and reliable flight operations with the T-Motor Velox V50A SE 4-in-1 ESC, engineered to elevate your aerial adventures to new heights.FeaturesSmooth and Reliable OperationElevate Your Aerial AdventuresHigh-Performance DesignCustomization OptionsSeamless IntegrationRobust 6S CapabilityBLHeli_32 FirmwareAdvanced FeaturesSpecificationsModel: Velox V50A SE 6SNumber of ESCs: 4-in-1Firmware: BLHeli_32Make: T-MotorVoltage: 6SAmps: 50Includes1x T-Motor Velox V50A SE 6S BL...

Upgrade your drone with the T-Motor VELOX V50A-SE 3-6S BLHeli_32 4-in-1 ESC. High-performance, reliable, and customizable for smooth flight operations. Buy now! 

T-Motor VELOX V50A-SE 3-6S BLHeli_32 4-in-1 ESC - RMRC

T-Motor VELOX V50A-SE 3-6S BLHeli_32 4-in-1 ESC

JHEMCU

JHEMCU 45A 3-6S 32Bit 30x30 4in1 ESC

FPVELITE














Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 45 amps. Get ready for smooth, rapid response and precise control.













Check out all our 30x30 ESCs, and the rest of our JHEMCU selection!

Specifications

Input Power: 3-6S(11-27V)

Current: 45A

BEC: NO

Instal Hole: 30.5x30.5xM4

Size: 44x43MM

Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX

Weight: 15.4g

Includes

1x JHEMCU BL32 32Bit 45A 3-6S 4in1 ESC 




Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 45 amps. Get ready for smooth, rapid response and precise control. Check out all our 30x30 ESCs, and the rest of our JHEMCU selection! Specifications Input Power: 3-6S(11-27V) C

JHEMCU BL32 32Bit 45A 3-6S 30x30 4in1 ESC

JHEMCU BL32 45A 3-6S 4in1 ESC - 30x30mm Check out all our 30x30mm Electronic Speed Controllers and the rest of our JHEMCU Products!   Specifications: Input Power 3-6S(11-27V) Current: 45A BEC:NO Instal Hole:30.5*30.5*M4 Size”44*43MM Firmware:BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX Weight:15.4g Package Includes: 1 x JHEMC

JHEMCU BL32 45A 3-6S 4in1 ESC - 30x30mm

WREKD General

             Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 45 amps. Get ready for smooth, rapid response and precise control.              Check out all our 30x30 ESCs, and the rest of our JHEMCU selection!  Specifications  Input Power: 3-6S(11-27V)  Current: 45A  BEC: NO  Instal Hole: 30.5x30.5xM4  Size: 44x43MM  Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX  Weight: 15.4g  Includes  1x JHEMCU BL32 32Bit 45A 3-6S 4in1 ESC    

JHEMCU BL32 32Bit 45A 3-6S 30x30 4in1 ESC from WREKD Co.

JHEMCU 60A 3-6S 32Bit 30x30 4in1 ESC














Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 60 amps. Get ready for smooth, rapid response and precise control.













Check out all our 30x30 ESCs, and the rest of our JHEMCU selection!

Specifications

Input Power: 3-6S(11-27V)

Current: 60A

BEC: NO

Instal Hole: 30.5x30.5xM4

Size: 44x43MM

Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX

Weight: 15.4g

Includes

1x JHEMCU BL32 32Bit 60A 3-6S 4in1 ESC




Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 60 amps. Get ready for smooth, rapid response and precise control. Check out all our 30x30 ESCs, and the rest of our JHEMCU selection! Specifications Input Power: 3-6S(11-27V) C

JHEMCU BL32 32Bit 60A 3-6S 30x30 4in1 ESC

JHEMCU BL32 60A 3-6S 4in1 ESC - 30x30mm Check out all our 30x30mm Electronic Speed Controllers and the rest of our JHEMCU Products!   Specifications: Input Power 3-6S(11-27V) Current: 60A BEC:NO Instal Hole:30.5*30.5*M4 Size”44*43MM Firmware:BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX Weight:15.4g Package Includes: 1 x JHEMC

JHEMCU BL32 60A 3-6S 4in1 ESC - 30x30mm

             Experience the power of 32 bit performance with the JHEMCU BL32 4-in-1 ESC. This high-efficiency ESC accommodates 3-6S LiPo input and supports 60 amps. Get ready for smooth, rapid response and precise control.              Check out all our 30x30 ESCs, and the rest of our JHEMCU selection!  Specifications  Input Power: 3-6S(11-27V)  Current: 60A  BEC: NO  Instal Hole: 30.5x30.5xM4  Size: 44x43MM  Firmware: BLHELI_32 JHEMCU_ESC32_MULTI_32_9.HEX  Weight: 15.4g  Includes  1x JHEMCU BL32 32Bit 60A 3-6S 4in1 ESC   

JHEMCU BL32 32Bit 60A 3-6S 30x30 4in1 ESC from WREKD Co.

Skystars

Skystars Uranus 35A F4 128KHz 32Bit 3-6S Single ESC

SKYSTARSRC

Top of the line Individual ESC brought to you by SkyStarsRC, working with 35 Amps, 128K PWM motor frequency, and has an F4 processor, all contributing to smooth and reliable operation when using this single ESC. 
Check out our Individual ESC selection, and our SkyStarsRC collection!
Specifications


Con.Current: 35A

Input voltage: 3-6S

ESC Type: Blheli_32 F4 128K

40V mosfet

Demiensions: 28.5x14.3x5.6mm

10g, including cables


Includes

1x SkyStarsRC F4 128K 32Bit Individual 35A ESC



Top of the line Individual ESC brought to you by SkyStarsRC, working with 35 Amps, 128K PWM motor frequency, and has an F4 processor, all contributing to smooth and reliable operation when using this single ESC.  Check out our Individual ESC selection, and our SkyStarsRC collection! Specifications Con.Current: 35A Inpu

SkyStarsRC Uranus F4 128K 32Bit Individual 35A ESC

SkyStarsRC Uranus F4 128K 32Bit Individual 35A ESC from WREKD Co.

Skystars Uraunus 35A is a standalone ESC suitable for use on airplanes or freestyle drones. The regulator supports power supply of 3-6S batteries and can handle current up to 35A. The control is handled by a powerful 32-bit processor with BlHeli_32 firmware, which supports PWM frequency up to 128KHz ensuring smooth mot

Skystars Uranus F4 128KHz BLHeli_32 35A 3-6S Individual ESC

Skystars MVP60 60A F4 32Bit 3-6S 4in1 ESC

Skystars MVP60 is a powerful ESC designed for racing and freestyle 5" drones. The ESC supports 3-6S Lipo batteries and can handle current up to 60A (80A peak). With a 32-bit processor, it uses BlHeli_32 firmware that supports telemetry, bidirectional DShot and PWM frequency up to 128KHz. The ESC has a 20x20mm mounting 

Skystars MVP60A F4 BLHeli_32 60A 3-6S 4-in-1 ESC - 20x20mm













SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC has great performance with a maximum current of 60A and a peak current of 80A. This ESC is powerful and reliable, and ideal for use in any 3-6S 20x20 setup. Get ready for a smooth and efficient flying experience! This board has support for a PWM frequency of 128K and comes with an F4 processor for incredibly smooth usage. 












Check out the rest of our 20x20 ESCs, and our SkystarsRC collection!
Specifications

Input voltage: 3-6S LiPo

Con.Current: 60A

Peak Current: 80A≥ 10S

Firmware: BLHeli_32

Support: Dshot 600/1200

Mounting hole : 20X20 mm/M3

BEC: No

Product size: 35.8x47x6.5mm

Weight: 17g


Includes

1x SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC



SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC has great performance with a maximum current of 60A and a peak current of 80A. This ESC is powerful and reliable, and ideal for use in any 3-6S 20x20 setup. Get ready for a smooth and efficient flying experience! This board has support for a PWM frequency of 128K a

SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC

SkyStarsRC MVP60 F4 128K 32Bit 60A 3-6S 20x20 4in1 ESC from WREKD Co.

Skystars KM65 65A 32Bit F4 128KHz 3-6S 4in1 ESC

Skystars KM65 is a powerful ESC for 5-8" freestyle and long-range drones. The ESC supports 3-6S batteries and current up to 65A, which makes it suitable for motors sizes 2207-2808. The ESC has an aluminum heat sink on it to help dissipate heat better while protecting sensitive components from mechanical damage. It can 

Skystars KM65 Blheli_32 F4 128KHz 65A 3-6S 4-in-1 ESC - 30 x 30mm

SpeedyBee

SpeedyBee 55A 3-6S 4in1 ESC

speeRuncA powerful 55A 4-in-1 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for durable build and smooth flight.   We also carry the F405 V4 FC and the F405 V4 Stack individually! Check out all our 30x30mm ESCs and the 

SpeedyBee 55A 3-6S BLS 4in1 ESC - 30x30mm

Elevate your drone's performance with the SpeedyBee BLS 55A 4-in-1 ESC.

SpeedyBee 55A BLHeli_S 4-in-1 ESC - 30x30

RUNCAM

Richer features, unbelievable price!












The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight.
Interested in the SpeedyBee F405 V4  BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 55A 4in1 ESC)?
Interested in the SpeedyBee F405 V4 3-6S 30x30 Flight Controller?
Check out all our 30x30 ESCs, and all our Speedy Bee products!












Features

User manual
ESC upgraded to 55A (70A burst) with heat sink 

Dual gyroscope power supply filtering 
1000uF huge filtering capacitor 
Large soldering pads








































Specifications

SpeedyBee BLS 55A 30x30 4-in-1 ESC

Firmware: BLHeli_S J-H-40

Wireless Configuration: Full Configuration Supported in the SpeedyBee app

PC Configurator Download Link: https://esc-configurator.com/
Continuous Current: 55A x 4
Burst Current: 70(10 seconds)
TVS Protective diode: Yes
External Capacitor: 1000uF Low ESR Capacitor(In the package)
ESC Protocol: DSHOT300/600
Power Input: 3-6S LiPo
Power Output: VBAT
Current Sensor: Support (Scale=400 Offset=0)
ESC Telemetry: Not supported
Mounting: 30.5 x 30.5mm( 4mm hole diameter)
Dimension: 45.6(L) x 44(W) x 8mm(H)
Weight: 23.5g

Includes

1x SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC


 Wiring Diagram



Richer features, unbelievable price! The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight. Interested in the SpeedyBee F405 V4  BLS 3-6S 30x30 Sta

SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC

SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC from WREKD Co.

RaceDayQuads

Richer features, unbelievable price!












The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight.
 












Features

User manual
ESC upgraded to 55A (70A burst) with heat sink 

Dual gyroscope power supply filtering 
1000uF huge filtering capacitor 
Large soldering pads








































Specifications

SpeedyBee BLS 55A 30x30 4-in-1 ESC

Firmware: BLHeli_S J-H-40

Wireless Configuration: Full Configuration Supported in the SpeedyBee app

PC Configurator Download Link: https://esc-configurator.com/
Continuous Current: 55A x 4
Burst Current: 70(10 seconds)
TVS Protective diode: Yes
External Capacitor: 1000uF Low ESR Capacitor(In the package)
ESC Protocol: DSHOT300/600
Power Input: 3-6S LiPo
Power Output: VBAT
Current Sensor: Support (Scale=400 Offset=0)
ESC Telemetry: Not supported
Mounting: 30.5 x 30.5mm( 4mm hole diameter)
Dimension: 45.6(L) x 44(W) x 8mm(H)
Weight: 23.5g

Includes

1x SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC


 Wiring Diagram



Richer features, unbelievable price! The powerful 55A (70A burst) 4-in-1 30x30 ESC, built with aluminum alloy heat sink + TVS protective diode + Japan-made TDK SMT capacitors + external 1000uF low ESR capacitor, everything is for a durable build and smooth flight.   Features User manual ESC upgraded to 55A (70A burst) 

Foxeer

Foxeer Reaper 80A F4 128K 32Bit 4-8S Single ESC

The Foxeer Reaper 80A F4 128K BL32 4-8S Single ESC is the next evolution of the Reaper ESC series. Thanks to the F4 processor, low heat generation, high-quality mosfets and excellent layout, this new version has a smoother flight performance and consistent power delivery. Check out all our Electronic Speed Controllers,

Foxeer Reaper 80A F4 128K BL32 4-8S Single ESC

T-Motor F55A Pro III 3-8S 32Bit 4in1 ESC












T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won't fail when compared to cheaper options. 











Check out all our 30x30 ESCs and all our T-Motor products!








Specifications

Voltage: 3-8S Lipo
Current: 4x55A
Peak Current: 4x65A

Firmware: Firmware: BLHELI_32
Telemetry: Support
BEC: No
Size: 44x40x7.5mm
Weight: 17.8g (Including Heatsink)Mounting Hole: 30.5x30.5mm/M3
Support Wide PWM Frequency: 16-128KHZ
Amperage Meter: 200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
1x 12AWG-130MM with XT60 Soldered input wires

2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor


T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won't fail when compared to cheap

T-Motor F55A Pro III 128K 32Bit 55A 3-8S 30x30 4in1 ESC from WREKD Co.

T-Motor F55A Pro III 128K 32Bit 55A 3-8S 30x30 4in1 ESC












T-Motor F55A Pro III, with its 32Bit 55A 3-8S 30x30 4in1 ESC, has support for a broad PWM frequency range of 16 - 128K. This ESC also features a heatsink designed to distribute heat evenly. T-Motor products are designed for premium FPV flying, focusing on QC and quality components that won't fail when compared to cheaper options. 




















Specifications

Voltage: 3-8S Lipo
Current: 4x55A
Peak Current: 4x65A

Firmware: Firmware: BLHELI_32
Telemetry: Support
BEC: No
Size: 44x40x7.5mm
Weight: 17.8g (Including Heatsink)Mounting Hole: 30.5x30.5mm/M3
Support Wide PWM Frequency: 16-128KHZ
Amperage Meter: 200

Includes

1x F55A Pro II 4 in 1 Brushless ESC
1x 12AWG-130MM with XT60 Soldered input wires

2x 61mm Signal wire
5x Cable Protectors
3x SH0.1mm Plugs(6/8/10)
1x Capacitor


The new T-Motor's updated F55A Pro III, the MCU F3 is a much faster ESC with high performance for demanding racing events. Just like the original, The F3 is fully capable of pushing 8s with 65A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firm

T-Motor F55A PROIII 3S-8S BLHeli32 4IN1 ESC - 30x30mm

Experience top-tier performance with the upgraded T-Motor F55A PRO III 4-in-1 ESC.&nbsp

Experience top-tier performance with the upgraded T-Motor F55A PRO III 4-in-1 ESC. 

T-Motor F55A PRO III 55A 3-8S BLHeli_32 4-in-1 ESC - 30x30

Aikon

Aikon AKC70 32Bit 70A 3-8S 30x30 8in1 ESC

The Aikon AKC70 70A 8-in-1 ESC is the ultimate control unit for your large Cinelifter's. Featuring a BLHeli_32 firmware, it offers smooth and accurate control. With a maximum current rating of 70A and supports 3-8S LiPo batteries, this ESC provides reliability and performance for your FPV drone. Pick up yours today! Ch

Aikon AKC70 70A 3-8S 8-in-1 BLHeli_32 ESC - 30x30mm

The Aikon AKC 70A 8-in-1 8S continues Aikon's pursuit of excellence! This ESC provides Aikon's proven quality and durability with 8 high current rated ESCs in one package that supports a supply voltage up to 8S. This is the perfect ESC for cinematic ocotocopter configurations.
Make sure to check out our other ESCs and entire line of Aikon gear!

Features

STM Electronics STM32G071 ARM® Cortex® M0+
8 ESCs in one package for compact octocopter builds
Top grade MOSFET 5x6mm package
Universal 30x30mm mount holes

Specifications

Battery: 2-8s
Constant Current: 70A
Burst Current: 80A
Mount Hole: 30x30mm
Firmware: BLHeli32
MCU: STM32G071
Bootloader: Yes
Weight( with wire): 25g
MOSFET Size: 5x6

Includes

1x Aikon AKC70 BL32 70A 3-8S 30x30 8in1 ESC


The Aikon AKC 70A 8-in-1 8S continues Aikon's pursuit of excellence! This ESC provides Aikon's proven quality and durability with 8 high current rated ESCs in one package that supports a supply voltage up to 8S. This is the perfect ESC for cinematic ocotocopter configurations. Make sure to check out our other ESCs and 

Aikon AKC70 32Bit 70A 3-8S 30x30 8in1 ESC from WREKD Co.

AIKON

SpeedyBee 50A 8Bit 3-6S 30x30 4in1 ESC

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor. 
Check out all our 30x30 ESCs and all our Speedy Bee products!
Specifications

BLS 50A 3-6S 4in1 ESC

Firmware: SpeedyBee BLS 50A

Continuous Current: 50Ax4

Burst Current: 55A(5S)
Power input: 3S - 6S LiPo

Power output: VBAT

Current Sensor: Supported (Scale=386 Offset=0)

Mounting: 30.5x0.5mm, 4mm hole size

Dimension: 45.6(L)x44(W)x6.1mm(H)

Weight: 13.8g with heat sink


Includes

1x BLS 50A 4in1 ESC
1x 35V 1500uF low ESR capacitor
5x Silicone O-ring M3
1x XT60 70mm power cable
1x SH1.0mm 8pin 30mm Cable
5x Silicone grommet M3*8.1mm

Wiring diagram


The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor.  Check out all our 30x30 ESCs and all our Speedy Be

SpeedyBee BLS 8Bit 50A 3-6S 30x30 4in1 ESC from WREKD Co.

SpeedyBee BLS 8Bit 50A 3-6S 30x30 4in1 ESC

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor. 
Specifications
BLS 50A 3-6S 4in1 ESC

Firmware: SpeedyBee BLS 50A

Continuous Current: 50Ax4

Burst Current: 55A(5S)
Power input: 3S - 6S LiPo

Power output: VBAT

Current Sensor: Supported (Scale=386 Offset=0)

Mounting: 30.5x0.5mm, 4mm hole size

Dimension: 45.6(L)x44(W)x6.1mm(H)

Weight: 13.8g with heat sink


Includes

1x BLS 50A 4in1 ESC
1x 35V 1500uF low ESR capacitor
5x Silicone O-ring M3
1x XT60 70mm power cable
1x SH1.0mm 8pin 30mm Cable
5x Silicone grommet M3*8.1mm

Wiring diagram


The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor.  Specifications BLS 50A 3-6S 4in1 ESC Firmware: Spe

The new SpeedyBee BLS 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor.  We also carry the F405 V3 Stack!  Check out all ou

SpeedyBee BLS 8Bit 50A 3-6S 4in1 ESC - 30x30mm

The SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC isn't just built for convenience, it is built for the performance that will fulfill all of your in flight needs. Choose the top ESC today!

SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC For Sale

The SpeedyBee 50A 3-6S BLHeli_S 4-in-1 ESC - 30x30 features a TVS diode, which protects the board from voltage spikes.

SpeedyBee 50A 3-6S BLHeli_S 4-in-1 ESC - 30x30

T-Motor Cine55A 55A 32Bit 3-8S 30X30 8-in-1 ESC

The T-Motor Cine 55A BLHeli_32 8-In-1 3-8S ESC (30X30). This ESC is perfect for large Cinelifters running 8 motors and up to 8S voltage! This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESCs. Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC and FC can connect with just one wire harness!
 Check out our other ESCs and the rest of the T-Motor line-up!
Features

Perfect for large Cinelifters running 8 motors and up to 8S voltage
Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC and FC can connect with just one wire harness
48 full-size imported MOs on board
Doubled-sized matte black heatsink
118 filtering capacitors on board
External dual capacitor pad
Extended telemetry transmission








Specifications

Rated Current: 8x55A
Peak Current: 8x65A
Input Voltage: 3-8s
Weight: 64g
Dimensions: 95.2x53x8.2mm
Amperage Meter Scale: 100
PWM frequency: 16-128K 
Mounting holes: 30.5x30.5 M3


Includes

1x T-Motor Cine-55A 32Bit 55A 3-8S 30x30 8in1 ESC
1x 200mm 10AWG XT60 Power Cable
8x Short silicone shock-absorbing washer
8x Long silicone shock-absorbing washer
2x SH1.0-8P connectors
2x SH1.0-10P connectors
1x Double-sided SH1.0 FC connector hardness
1x Single-sided SH1.0 FC connector hardness
2x Capacitor
1x QC PASS Card
2x Stickers


The T-Motor Cine 55A BLHeli_32 8-In-1 3-8S ESC (30X30). This ESC is perfect for large Cinelifters running 8 motors and up to 8S voltage! This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESCs. Combine this ESC with the T-Motor F7 Pro Flight Controller and make wiring even easier as the ESC an

T-Motor Cine-55A 32Bit 55A 3-8S 30x30 8in1 ESC

Introducing T-Motors new 30x30mm 8-in-1 ESC. Perfect for large Cinelifter's running 8 motors and up to 8S voltage. This ESC makes building a breeze as you no longer need to wire up two 4-in-1 ESC's. Combine this ESC with the T-Motor F7 Pro flight controller and wiring is even easier as the ESC and FC can connect with j

T-Motor Cine55A 55A 8-in-1 BLHeli_32 ESC 3-8S - 30x30mm

T-Motor Cine-55A 32Bit 55A 3-8S 30x30 8in1 ESC from WREKD Co.

SpeedyBee V3 50A 32bit 3-6S 30x30 4in1 ESC

The new SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor, ensuring clean data from the gyro to the FC and tested by 2 top racing pilots, both over 1500 packs. It's also fitted with a high-quality CNC heat sink shield to significantly reduce the heat from your MOSFETs ensuring stable current flow at a high-throttle position. This ESC should have no issues with overheating. A great benefit in a stylish blue finish.
Check out all our 30x30 ESCs and all our Speedy Bee products!

Specifications
32Bit 50A 3-6S 4in1 ESC

Firmware: SpeedyBee BL32 50A

Continuous Current: 50Ax4

Burst Current: 55A(5S)
Power input: 3S - 6S LiPo

Power output: VBAT

Current Sensor: Supported (Scale=490 Offset=0)

Mounting: 30.5x0.5mm, 4mm hole size

Dimension: 45.6(L)x40(W)x8.8mm(H)

Weight: 19.2g with heat sink


Includes

1x SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC

Wiring Diagram
 

The new SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC comes packed with extras. The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props. It also provides a humongous 1500uF low ESR capacitor, ensuring clean data from the gyro to the FC 

SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC from WREKD Co.

SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC

Introducing the Speedybee 50A ESC! Now supporting up to 128kHz PWM frequency with an F4 processor. It also now comes with a heatsink, 1500uF Low ESR capacitor, and onboard TVS diodes to keep the FET's cool and absorb voltage spikes from damaging your components. We also carry the Stack!  Check out all our Electronic Sp

SpeedyBee 50A F4 128K BLHeli_32 2-6S 4in1 ESC - 30x30mm

Foxeer Reaper 65A 128K 32Bit 3-8S 30x30 4in1 ESC

WREKD is a family-owned & operated, leading online FPV super-store based in the United States specializing in FPV racing / freestyle / tiny / micro whoop drones, parts, gear, and accessories. We offer fast, domestic, same-day shipping with the quickest delivery to anywhere in the U.S.A.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 4in1 ESC - 30x30mm from WREKD Co.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 4in1 ESC - 30x30mm

The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out all our 30x30mm Electronic Speed Controllers and the rest of our Foxeer Products! Specifications Input Voltage: 3-8S LiPo

The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs.
Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings!
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 

Telemetry: Yes

Firmware: BLHeli_32

Target: FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Pattern: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC

Wiring Diagram


The Foxeer Reaper F4 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. Check out the rest of our 30x30 ESCs, as well as the rest of our Foxeer offerings! Specifications Input Voltage: 3-8S LiPo Max. Con

Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC from WREKD Co.

Foxeer Reaper F4 128K 32Bit 65A 3-8S 30x30 4in1 ESC






Firmware

FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9


Continuous /Burst Current
65A*4 / 100A*4


Input Voltage
DC 9V~40V (3-8S Lipo)



BEC

No



Telemetry

Supported



ESC Programming

BLHeli32



Input Signal

DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc.


Working Temperature
-20℃ ~ +55℃


Working Humidity
20～95%


Storage Temperature
-20℃ ~ +70℃


Mounting Hole
30.5X30.5mm,Φ4mm/M3


Dimension
42.5x42x5.5mm


Weight

14.8g




 











Firmware FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9 Continuous /Burst Current 65A*4 / 100A*4 Input Voltage DC 9V~40V (3-8S Lipo) BEC No Telemetry Supported ESC Programming BLHeli32 Input Signal DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature -20℃ ~ +55℃ Working Humidity 20～95% Storage Temperature -2

Foxeer Reaper F4 128K 65A BL32 4in1 ESC 3-8s

FOXEER

The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp TunedPairs best with the Foxeer F722 V2 Flight controller
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 


Firmware: BLheli_32

Target: FOXEER_Reaper4IN1_65A_128_Multi_32_8
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Dimensions: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC
1x AMASS XT60H Pigtail
1x 560uf 35V Capacitor



The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp; TunedPairs best with the Foxeer F722 V2 Flight controller Specifications I

Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC

The Foxeer Reaper 128K is the next evolution of the Reaper ESC series. With its low heat generation and high-quality mosfets, this new version has a smoother flight, with fewer desyncs. This is a replacement ESC for The Moxy Pro-Spec Built &amp; TunedPairs best with the Foxeer F722 V2 Flight controller
Specifications


Input Voltage: 3-8S LiPo


Max. Continuous Current: 65A


Max Burst Current: 100A 


Firmware: BLheli_32

Target: FOXEER_Reaper4IN1_65A_128_Multi_32_8
Input Signal: DShot 150/300/600/1200/MultiShot/OneShot 

BEC: No


Mounting Dimensions: 30x30mm M3

Dimensions: 42.5x42.5mm

Weight: 14.8g


Includes

1x Foxeer Reaper 128K 32Bit 65A 3-8S 30x30 4in1 ESC
1x AMASS XT60H Pigtail
1x 560uf 35V Capacitor



Aikon AK32 Pro V2 32Bit 50A 2-6S 20x20 4in1 ESC

The Aikon AK32 Pro II continues Aikon's pursuit of excellence! This ESC combines the latest forward-looking capabilities with top of the line reliability. 
Make sure to check out our other ESCs and entire line of Aikon gear!
Specifications

Input Voltage: 2-6S
MCU: AT32F421
Max Continuous Current: 50A
Max Burst Current: 65A
Firmware: BLHeli32
Bootloader: Yes
Mounting Pattern: 20x20mm
Weight: 13.8g

Includes

1x Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC


The Aikon AK32 Pro II continues Aikon's pursuit of excellence! This ESC combines the latest forward-looking capabilities with top of the line reliability.  Make sure to check out our other ESCs and entire line of Aikon gear! Specifications Input Voltage: 2-6S MCU: AT32F421 Max Continuous Current: 50A Max Burst Current:

Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC from WREKD Co.

Aikon AK32PRO II 32bit 50A 2-6S 20x20 4in1 ESC

The Aikon AK32Pro II 4-in-1 50A 6S continues Aikon’s pursuit of excellence! This new ESC combines the latest forward-looking capabilities with an L4-based processor and dual MOSFET packages. This allows the AK32Pro II to achieve 96khz PWM rates and the fastest DShot input rates available. Check out all the Electronic S

Aikon AK32Pro II 4in1 50A 6S BLHeli32 ESC W/ Heatsink - 20x20mm

The Aikon AK32Pro II 4-in-1 50A 6S continues Aikon’s pursuit of excellence! This new ESC combines the latest forward-looking capabilities with an L4-based processor and dual MOSFET packages.

Aikon AK32Pro II 50A 2-6S BLHeli32 4-in-1 ESC 

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC

Introducing T-Motors new budget 30x30mm 4-in-1 ESC. Just because it's budget doesn't mean it isn't able to handle high current draw with a 55 amp burst rating. It also has large solder pads on the front and back of the board which make soldering a breeze. Pair it with the F411 Lite FC and you've got a great stack for f

T-Motor Velox V45A Lite ESC 3-6S BLheli-S 4IN1 ESC - 30x30mm

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC back and this time it's Lite! No heatsink for reduced weight but with the durability that you're used to from TMotor.
Check out the 30x30 4in1 ESCs and all our T-Motor products!
Specifications

Current: 45A
Peak Current: 55A(10S)
Input Voltage: 3-6S LiPo
Sofware: BLHeli_S
Mounting Pattern: 30x30, M3
Weight: 13g

Includes

1x T Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC


This T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC has no heatsink for reduced weight and durability. Visit our online store today!

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC For Sale

Are you looking to make a sub 250g and need to shave off a few extra grams? Or a racer with a tight build that could use an extra few millimeters of space? Well your search for the perfect ESC is over now. The Velox Lite is the ESC you have been dreaming of!
Specifications

Input Voltage: 3-6S
Max. Continuous Current: 45A
Max. Burst Current: 55A (10 seconds max)
Firmware: BlHeliM
Current Sensor: Yes
Mounting Dimensions: 30x30mm
Weight: 13g

Includes

1x Velox Lite 8Bit 45A 3-6S 30x30 4in1 ESC


Are you looking to make a sub 250g and need to shave off a few extra grams? Or a racer with a tight build that could use an extra few millimeters of space? Well your search for the perfect ESC is over now. The Velox Lite is the ESC you have been dreaming of!

Velox Lite 8Bit 45A 3-6S 30x30 4in1 ESC

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC back and this time it's Lite! No heatsink for reduced weight but with the durability that you're used to from TMotor. Check out the 30x30 4in1 ESCs and all our T-Motor products! Specifications Current: 45A Peak Current: 55A(10S) Input Voltage: 3-6S LiPo Sofware: BLHeli_S M

T-Motor V45A Lite 8Bit 45A 3-6S 30x30 4in1 ESC from WREKD Co.

Rush FPV

Rush FPV Rush Blade 60A 32Bit 3-6S 48kHz 20x20 4in1 ESC - Racing Edition

The Rush Blade 60A 3-6S 48kHz BLHeli_32 4-in-1 ESC Racing Edition by RUSHFPV features, front &amp; back special process aluminum shell, BLHeli_32 Firmware, 24kHz-48KHz PWM frequency 3oz dual board and 40V rated MOSFET. Check out our other 20x20mm ESC's and the rest of our Rush FPV Products!  Features BLHeli_32 firmware

RUSHFPV Rush Blade Racing 32Bit 60A 3-6S 48kHz 20x20 4in1 ESC

RUSHFPV

The RUSHFPV 60A 3-6S BLHeli_32 4-in-1 Racing ESC fits into a narrow frame space thanks to a 15% reduction in volume!

RUSHFPV RUSH BLADE Mini 60A 3-6S BLHeli_32 4-in-1 ESC - Racing Edition - 20x20

iFlight

iFlight BLITZ E55 55A 32Bit 2-6S 30x30 4in1 ESC

IFLIGHT

The next generation of ESCs from iFlight has arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new 55 Amp BLHeli 32 Blitz 4-in-1 ESCs can handle even the most amp-hungry motors.
Check out all our 30x30 ESCs and all our iFlight gear selection!
Specifications


Input Voltage: 2-6S

Max. Continuous Current: 55A
Max. Burst Current: 65A 
MCU: G071
BEC: No
Firmware: BLHeli32
Current Sensor: Yes
Target: IFLIGHT_BLITZ_G2
Mounting Dimensions: 30.5x30.5mm/Φ4mm
Dimensions: 35x42mm
 Weight: 15.3g 

Includes

1x iFlight Blitz E55 55A 2-6S 30x30 4in1 ESC
1x Wiring Set


The next generation of ESCs from iFlight has arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new 55 Amp BLHeli 32 Blitz 4-in-1 ESCs can handle even the most amp-hungry motors. Check out all our 30x30 ESCs and all our iFlight gear selection! Specifications Input Voltage: 2-6S Max. Co

iFlight Blitz E55 32Bit 55A 2-6S 30x30 4in1 ESC

﻿The next generation of ESC's from iFlight have arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new 55 Amp BLHeli 32 Blitz 4-in-1 ESC's can handle even the most amp hungry motors. Check out all our 30x30 Electronic Speed Controllers and the rest of our iFlight Products! Specificatio

iFlight Blitz E55 55A 2-6S ESC - 30x30mm

iFlight Blitz E55 32Bit 55A 2-6S 30x30 4in1 ESC from WREKD Co.

HGLRC

HGLRC Zeus 50A Pro 3-8S 20x20 4in1 ESC

High-quality, reliable ESC for those high power 8S builds, HGLRC always provides a premium product. Check out all our Electronic Speed Controllers and the rest of our HGLRC Products! Features: High-performance hardware, stable 50A, peak 60A Large MOSFET small size board, 20x20 mounting holes, is the first choice for ra

HGLRC Zeus 50A Pro 3-8S BLHeli_S 4in1 ESC - 20x20

The&nbspHGLRC Zeus 50A Pro&nbspis a 4-in-1 ESC featuring BLHeli_S firmware and a 3-8S input voltage. All of this power is packed into a large MOSFET mini-sized 20x20 board that is ideal for FPV freestyle&nbsp and racing!

The HGLRC Zeus 50A Pro is a 4-in-1 ESC featuring BLHeli_S firmware and a 3-8S input voltage. All of this power is packed into a large MOSFET mini-sized 20x20 board that is ideal for FPV freestyle  and racing!