FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

iFlight

iFlight BOB57 O3 6" Frame Kit

IFLIGHT

The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights.
Be sure to browse the rest of our iFlight products and DJI compatible frames, electronics and accessories.
Don't feel like building it but one one now!? We also carry the BNF!
Features

Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers
Solid antenna mount for less ocillations when using long antennas

H-shaped frame with robust middle section for less props in view
Gladiator shell protects from dust and water droplets
Front-mounting XT-60
Compatible with DJI O3 Air Unit and Vista

Specifications

Product Name: BOB57 O3 Frame Kit
Frame wheelbase: 278mm
Frame Dimension: L165 x W225 x H34 mm
Weight: 305g
Frame Body Dimension: 34mm
Arm Thickness: 6mm
Bottom Plate Thickness: 1.5mm
Top Plate Thickness: 2mm
Upper Plate Thickness: 2.5mm
Motor Mounting: 16 x 16mm
VTX Mounting: 25.5 x 25.5/Φ1.6mm, 20 x 20/Φ2mm

 

Includes

1 x BOB57 O3 Frame Kit
1 x BOB57 TPU Parts
1 x 215mm MIPI Video Cable for DJI O3 Air Unit
4 x Motor Wire Shield Tube
1 x Battery Anti-Slip Pad
2 x Battery Strap
1 x Screw Bag


The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot &amp; videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights. Be sure

iFlight BOB57 O3 LR & Freestyle Cinematic 6" Frame Kit

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

SpeedyBee

SpeedyBee Bee35 Pro 3.5" Micro Frame Kit - LED Version

RUNCAM

The brand-new Bee35 Pro - Now available with customizable LED light strip!
The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones. Durable, effective, and resilient, the frame kit is great for both beginners and veterans with its tough prop guards that can survive rough handling.
Looking for the non-pro version, check out the SpeedyBee Bee35! 
Be sure to check out all our 3.5" frames, and all our Speedy Bee products!
Features

Custom-made aluminum alloy head to protect the O3 effectively without obstruction.
Customized silicone shock absorption O3 lens, eliminates the 'jelly' effect.
Custom-designed bottom aluminum alloy for heat dissipation, integrating seamlessly with O3 and RunCam Link. Includes a convenient Type-C port and memory card slot for easy frequency tuning.
Compatibility with 20x20mm, 25x25mm, and 30.5x30.5mm stacks.
Battery support featuring both horizontal and vertical binding designs for enhanced durability and easy installation.
Connects to the flight controller without disassembling the drone, supporting both Type-C and micro interfaces.
Ultra-strong injection-molded protective ring with a cutout for simple LED light strip installation.
A comprehensive set of printed parts: GoPro mount / 121GPS mount / multifunctional antenna mount / T-shaped antenna mount.
Adjustable GPS mount for MASTER 5 V2 GPS, including a standard 121GPS mount.
Option for a detachable shock-absorbing gimbal (sold separately).

Quick Release Solution
Only 6 screws are to be removed for freeing drone body and propeller guard.



Aerospace-grade Aluminum Front Plate
The aviation-grade aluminum headpiece provides excellent protection for the lens, and it is embedded with custom silicone damping material, resulting in effective anti-vibration performance for the lens. The GyroFlow effect is enhanced for better stability.

100% efficient heat dissipation
We have found that the O3 video transmitter shuts down due to high CPU temperatures during prolonged high-temperature operation. To address this issue, we have specially designed a 7075-T aerospace-grade aluminum component for the O3 video transmitter, doubling its heat dissipation efficiency! Additionally, it features 20x20 mounting screw holes, making it compatible with Link, TX800, and other 20-hole video transmitters.
Note: The test data is conducted at an ambient temperature of 26 degrees Celsius. The actual performance may vary depending on the temperature of the usage environment.

Custom-made aerospace-grade aluminum components
Specially designed to solve the TF card insertion issue of O3 without disassembly. Easily insert the card without any hassle. It also features a dedicated frequency position for O3 and Link video transmitters, making it super convenient for Type-C connection!

H-FOV135°
135° wide-angle without dark corners.

Two battery installation methods
Super convenient battery strap design allows for horizontal or vertical battery mounting.





Super durable injection-molded ring
Made of high-strength imported composite material with built-in LED strip mounting groove.
Compatible with Meteor LED
Offers seven preset basic effects and allows for wireless customization of your personal lighting styles through the app.
 

 

Compatible with flight towers
Supports installation of various flight towers and AIO (All-In-One) boards in sizes of 20x20, 25.5x25.5 (45° 90°), and 30.5x30.520-hole MINI flight tower —— Recommended (Perfect fit)25.5-hole AIO flight controller —— Recommended (Perfect fit)30.5-hole standard flight tower —— Not recommended (Installation is compact and requires some hands-on skills)






Multi-function antenna mount
Type-C adapter cable directly plugs into the flight controller without disassembling the aircraft.






Specifications

Wheelbase: 153mm
Top Plate Thickness: 3.5mm
Bottom Plate Thickness: 2mm
Camera Mounting Distance: 19/20mm
ESC/Motor Mounting Height: 24mm
Flight Stack Mounting Holes: 20x20/25.5x25.5/30.5x30.5mm
Video Transmitter Mounting Holes: 20x20/25.5x25.5
Propeller Size: 90mm
Motor Mounting Holes: 12x12mm
Weight: 138g
CNC Heat Sink: 15g
Camera Gimbal: 28g
Recommended Motor: 1806/2004/2006
Recommended KV: 4S/2500-3500KV, 6S/1800-2300KV
Recommended Battery: 900-1500mAh 4S/6S

Includes

1x SpeedyBee Bee35 Pro 3.5" Frame - LED Version



The brand-new Bee35 Pro - Now available with customizable LED light strip! The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones. Durable, effective, and resilient, the 

SpeedyBee Bee35 Pro 3.5" Micro Frame - LED Version

The brand-new Bee35 Pro - Now available with customizable LED light strip!
The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinewhoop pilot looking for a bit more power to capture stunning pictures and videos, freestyle cruising, and exploring your flight zones. Durable, effective, and resilient, the frame kit is great for both beginners and veterans with its tough prop guards that can survive rough handling.
Looking for the non-pro version, check out the SpeedyBee Bee35! 
Be sure to check out all our 3.5&quot frames, and all our Speedy Bee products!
Features

Custom-made aluminum alloy head to protect the O3 effectively without obstruction.
Customized silicone shock absorption O3 lens, eliminates the &#39jelly&#39 effect.
Custom-designed bottom aluminum alloy for heat dissipation, integrating seamlessly with O3 and RunCam Link. Includes a convenient Type-C port and memory card slot for easy frequency tuning.
Compatibility with 20x20mm, 25x25mm, and 30.5x30.5mm stacks.
Battery support featuring both horizontal and vertical binding designs for enhanced durability and easy installation.
Connects to the flight controller without disassembling the drone, supporting both Type-C and micro interfaces.
Ultra-strong injection-molded protective ring with a cutout for simple LED light strip installation.
A comprehensive set of printed parts: GoPro mount / 121GPS mount / multifunctional antenna mount / T-shaped antenna mount.
Adjustable GPS mount for MASTER 5 V2 GPS, including a standard 121GPS mount.
Option for a detachable shock-absorbing gimbal (sold separately).

Quick Release Solution
Only 6 screws are to be removed for freeing drone body and propeller guard.



Aerospace-grade Aluminum Front Plate
The aviation-grade aluminum headpiece provides excellent protection for the lens, and it is embedded with custom silicone damping material, resulting in effective anti-vibration performance for the lens. The GyroFlow effect is enhanced for better stability.

100% efficient heat dissipation
We have found that the O3 video transmitter shuts down due to high CPU temperatures during prolonged high-temperature operation. To address this issue, we have specially designed a 7075-T aerospace-grade aluminum component for the O3 video transmitter, doubling its heat dissipation efficiency! Additionally, it features 20x20 mounting screw holes, making it compatible with Link, TX800, and other 20-hole video transmitters.
Note: The test data is conducted at an ambient temperature of 26 degrees Celsius. The actual performance may vary depending on the temperature of the usage environment.

Custom-made aerospace-grade aluminum components
Specially designed to solve the TF card insertion issue of O3 without disassembly. Easily insert the card without any hassle. It also features a dedicated frequency position for O3 and Link video transmitters, making it super convenient for Type-C connection!

H-FOV135°
135° wide-angle without dark corners.

Two battery installation methods
Super convenient battery strap design allows for horizontal or vertical battery mounting.





Super durable injection-molded ring
Made of high-strength imported composite material with built-in LED strip mounting groove.
Compatible with Meteor LED
Offers seven preset basic effects and allows for wireless customization of your personal lighting styles through the app.
 

 

Compatible with flight towers
Supports installation of various flight towers and AIO (All-In-One) boards in sizes of 20x20, 25.5x25.5 (45° 90°), and 30.5x30.520-hole MINI flight tower —— Recommended (Perfect fit)25.5-hole AIO flight controller —— Recommended (Perfect fit)30.5-hole standard flight tower —— Not recommended (Installation is compact and requires some hands-on skills)






Multi-function antenna mount
Type-C adapter cable directly plugs into the flight controller without disassembling the aircraft.






Specifications

Wheelbase: 153mm
Top Plate Thickness: 3.5mm
Bottom Plate Thickness: 2mm
Camera Mounting Distance: 19/20mm
ESC/Motor Mounting Height: 24mm
Flight Stack Mounting Holes: 20x20/25.5x25.5/30.5x30.5mm
Video Transmitter Mounting Holes: 20x20/25.5x25.5
Propeller Size: 90mm
Motor Mounting Holes: 12x12mm
Weight: 138g
CNC Heat Sink: 15g
Camera Gimbal: 28g
Recommended Motor: 1806/2004/2006
Recommended KV: 4S/2500-3500KV, 6S/1800-2300KV
Recommended Battery: 900-1500mAh 4S/6S

Includes

1x SpeedyBee Bee35 Pro 3.5&quot Frame - LED Version



SpeedyBee Bee35 Pro 3.5" Micro Frame - LED Version from WREKD Co.

SpeedyBee Bee35 Pro 3.5

BetaFPV

BetaFPV Pavo35 Cinewhoop 3.5" Micro Frame Kit

BETAFPV

Pavo35 cinewhoop frame features newly engineered supports to reduce vibrations as well as being able to accommodate the strong thrust of 6S motors. The ducts are inspired by rocket nozzles to enhance horizontal stability. This frame has aluminum CNC metal supports &ampamp built-in XT-60 mount. 
Be sure to check out all our 3.5&quot frames, and the rest of our BetaFPV gear!

Features

The innovative Y-shaped CNC metal support structure can improve the structural strength, torsion resistance, and vibration characteristics of the entire machine compared to aluminum columns, making it respond faster and more smoothly.

Rocket engine-inspired duct design improves lateral stability and increases thrust by 400g compared to without a propeller guard, giving the Pavo35 stronger power and a better flying feel.

The whoop duct is riveted and assembled, and the new appearance and design concept enables more effortless installation and a stronger structure.


Pavo35 Frame Kit
Pavo35 whoop duct can enhance an additional 400g thrust and also a CNC 7075 Aluminum Y shape standoff to eliminate distortion and bending during flight. Powerful and smooth flying is guaranteed. The modular design of the frame guarantees a streamlined appearance, with no protruding wires and the fixed power port design enables effortless one-handed connection. Assembling the frame is a breeze, requiring the simple tightening of the four bottom screws and utilizing the riveting design for convenient detachment of the duct.

The design of the whoop duct fully refers to the aerodynamic principle of the rocket engine nozzle and utilizes different heights and thicknesses between the upper edge and lower edge, through the compression of the inlet air within the duct, a substantial increase in exhaust pressure is achieved. Consequently, an additional thrust of 400g is generated, while simultaneously enhancing the horizontal stability of the cinewhoop. With augmented power and exceptional flight stability, executing challenging maneuvers such as flips and turns on the Pavo35 results in remarkably steady and precise responses. Pilots will experience an enhanced flying sensation.
The Y structural Shape standoff means 8 support force is on the top plate, increasing the structural strength of the quad, which results in smoother turns and minimal vibrations during flight. The CNC standoff is made with aircraft standard material - 7075 Aluminium Alloy to increase strength for ensure that pilots can embark on powerful flights with confidence. Additionally, the duct is securely fastened with only 4 screws, while the remaining connections employ the time-honored Chinese traditional riveting technique to ensure fast assembling and disassembling also including fixed power port design.
Specifications

Item: Pavo35 Brushless Whoop Frame
Wheelbase: 148mm

Top Plate: 3mm T700 carbon fiber

Base Plate: 1.5mm T700 carbon fiber

Gimbal Carbon Plate: 2mm T700 carbon fiber

Column: 7075 aluminum alloy CNC

Battery Holder: 7075 aluminum alloy CNC

Whoop Duct: PC injection-molded translucent gray


Whoop Duct Diameter: 92mm
Battery Connector: Fixed XT60

Camera Installation Size: 20mm (compatible with 19mm)

HD VTX Installation Size: 25.5x25.5mm M1.6/20x20mm M2

HD VTX Antenna Mounting Hole Size: 4mm

Flight controller Mounting Hole Size: 25.5x25.5mm

Motor Mounting Hole Size: 4xM2 EQS ø12mm

Weight: 113.9g

Includes

1x Top Plate
1x Gimbal Carbon Plate

1x Base Plate

2x Battery Tie Holder

4x Y-shaped Aluminum Alloy Bracket

1x Whoop Duct

1x Receiver Holder

1x Amass XT60EW-M Socket (Black)

2x Battery Anti-slip Mat
1x Battery Tie

4x Flight Controller Amping Ball

4x Pan/Tilt Vibration Reduction Ball

4x Pan/Tilt Screws

2x Inner Hex Flat Head Screw M2.5x5

10x Inner Hex Flat Head Screw M2x6

4x Inner Hex Flat Head Screw M2x8

4x Inner Hex Flat Head Screw M2x10

4x Nylon nut M2
1x Accessory package

1x Service Card

1x Frame Manual

 

Pavo35 cinewhoop frame features newly engineered supports to reduce vibrations as well as being able to accommodate the strong thrust of 6S motors. The ducts are inspired by rocket nozzles to enhance horizontal stability. This frame has aluminum CNC metal supports &amp; built-in XT-60 mount.  Be sure to check out all o

BetaFPV Pavo35 Cinewhoop 3.5" Micro Frame Kit from WREKD Co.

BetaFPV Pavo35 Cinewhoop 3.5

Pavo35 cinewhoop frame features newly engineered supports to reduce vibrations as well as being able to accommodate the strong thrust of 6S motors. The ducts are inspired by rocket nozzles to enhance horizontal stability. This frame has aluminum CNC metal supports &amp built-in XT-60 mount. 
Be sure to check out all our 3.5" frames, and the rest of our BetaFPV gear!

Features

The innovative Y-shaped CNC metal support structure can improve the structural strength, torsion resistance, and vibration characteristics of the entire machine compared to aluminum columns, making it respond faster and more smoothly.

Rocket engine-inspired duct design improves lateral stability and increases thrust by 400g compared to without a propeller guard, giving the Pavo35 stronger power and a better flying feel.

The whoop duct is riveted and assembled, and the new appearance and design concept enables more effortless installation and a stronger structure.


Pavo35 Frame Kit
Pavo35 whoop duct can enhance an additional 400g thrust and also a CNC 7075 Aluminum Y shape standoff to eliminate distortion and bending during flight. Powerful and smooth flying is guaranteed. The modular design of the frame guarantees a streamlined appearance, with no protruding wires and the fixed power port design enables effortless one-handed connection. Assembling the frame is a breeze, requiring the simple tightening of the four bottom screws and utilizing the riveting design for convenient detachment of the duct.

The design of the whoop duct fully refers to the aerodynamic principle of the rocket engine nozzle and utilizes different heights and thicknesses between the upper edge and lower edge, through the compression of the inlet air within the duct, a substantial increase in exhaust pressure is achieved. Consequently, an additional thrust of 400g is generated, while simultaneously enhancing the horizontal stability of the cinewhoop. With augmented power and exceptional flight stability, executing challenging maneuvers such as flips and turns on the Pavo35 results in remarkably steady and precise responses. Pilots will experience an enhanced flying sensation.
The Y structural Shape standoff means 8 support force is on the top plate, increasing the structural strength of the quad, which results in smoother turns and minimal vibrations during flight. The CNC standoff is made with aircraft standard material - 7075 Aluminium Alloy to increase strength for ensure that pilots can embark on powerful flights with confidence. Additionally, the duct is securely fastened with only 4 screws, while the remaining connections employ the time-honored Chinese traditional riveting technique to ensure fast assembling and disassembling also including fixed power port design.
Specifications

Item: Pavo35 Brushless Whoop Frame
Wheelbase: 148mm

Top Plate: 3mm T700 carbon fiber

Base Plate: 1.5mm T700 carbon fiber

Gimbal Carbon Plate: 2mm T700 carbon fiber

Column: 7075 aluminum alloy CNC

Battery Holder: 7075 aluminum alloy CNC

Whoop Duct: PC injection-molded translucent gray


Whoop Duct Diameter: 92mm
Battery Connector: Fixed XT60

Camera Installation Size: 20mm (compatible with 19mm)

HD VTX Installation Size: 25.5x25.5mm M1.6/20x20mm M2

HD VTX Antenna Mounting Hole Size: 4mm

Flight controller Mounting Hole Size: 25.5x25.5mm

Motor Mounting Hole Size: 4xM2 EQS ø12mm

Weight: 113.9g

Includes

1x Top Plate
1x Gimbal Carbon Plate

1x Base Plate

2x Battery Tie Holder

4x Y-shaped Aluminum Alloy Bracket

1x Whoop Duct

1x Receiver Holder

1x Amass XT60EW-M Socket (Black)

2x Battery Anti-slip Mat
1x Battery Tie

4x Flight Controller Amping Ball

4x Pan/Tilt Vibration Reduction Ball

4x Pan/Tilt Screws

2x Inner Hex Flat Head Screw M2.5x5

10x Inner Hex Flat Head Screw M2x6

4x Inner Hex Flat Head Screw M2x8

4x Inner Hex Flat Head Screw M2x10

4x Nylon nut M2
1x Accessory package

1x Service Card

1x Frame Manual

 

NewBeeDrone

NewBeeDrone CinemAh 3" Frame


A New Cinewhoop Design Philosophy

To date, many ducted cinewhoop frames have been needlessly heavy. Additionally, existing light cinewhoop frames don’t have guarded props for flying around softer targets. Heavy frames leave you with very little room for adaptability to use the frame for your shoots whether it be increased payload capacity or the option for larger batteries. We at NewBeeDrone worked to change that.
The CinemAh Frame - The Most Versatile Cinewhoop Frame
The CinemAh frame is NewBeeDrone’s response to the need for a lighter and more versatile cinewhoop frame to carry a full GoPro. The CinemAh has a unique all-carbon fiber frame structure that allows for easy access to electronics while providing maximum structural strength.
The GoPro Mount (Not Included)
The NewBeeDrone CinemAh cinewhoop TPU GoPro 8 and 9 mounts allow for 4 built-in angles for quick-snap adjustment from 0 deg to 22.5 deg. The capture cam mounts are 2xM2 mounting holes set 20mm apart allowing the community to design any mounting solution for any HD capture cam option. 
Other 3D Printed Accessories (Not Included)
﻿Check out our complete collection of 3D printed accessories for the Cinemah! We've got snap in ducts, lightweight battery straps, and protective duct coverings in addition to action camera mounts.
 
Electronics Mounting:

2 sets of 1x1inch mounting locations
Front 20x20 location has M3 mounting for a flight controller and ESC stack.
Rear 20x20 location has M2 mounting for Caddx Vista – with rear antenna mount.
Camera mounting – single and double screw camera mounting options.
Note: The frame does not fit an air unit.

Motor Mounting: 12mm diameter, 4-hole pattern

Suggested Motors: 14xx – 20xx

Propeller size:

3inch or 76mm propeller 


Weight: 

78g with Adjustable GoPro Hero8 mount and motor screws
68g without GoPro Hero 8 mount 
Downloadable 3D printed TPU snap-in ducts (x4) weigh 24g total – 6g each duct

Included in the CinemAh Frame Package

1x Set of Carbon Fiber Parts
1x Set of Hardware

Recommended Parts:

Stack: NewBeeDrone Infinity200 or Cricket200
Motors: NewBeeDrone Flow 1408 4150KV
DJI FPV System: CaddX Vista with DJI Camera

Battery: GNB 1300-1350mAh 4s Lipo
Propellers: Gemfan Ducted Durable 5 Blade 76mm
GoPro Hero 8 and Hero 9 Mount

If you need 3D prints, get them here! 
3D Printed Parts Files
3D Printed Parts Design by Third partyCaddx Peanut Mount by Jason Suter. Thank you Jason!!
Link to manual.
We have both 4S and 6S tune by using the parts above, this tune is under betaflight firmware 4.2.X. if you are using 4.2.x you can directly copy the text and go to CLI commend to paste. it will auto save to your PID and Filter profile setting. Profile 1 is for 6S setup, Profile 2 is for 4S setup, Please make sure you choose the right PID profile on the setting to match your drone configuration. This PID will also works for any flight controller are under betaflight 4.2.x version, as long as the flight controller is using MPU6000 gyro. The text document I provide below only contain the PID and Filter data for 3 different profile. It will not change any other settings on your flight controller. Link




Build Video: 

A New Cinewhoop Design Philosophy To date, many ducted cinewhoop frames have been needlessly heavy. Additionally, existing light cinewhoop frames don’t have guarded props for flying around softer targets. Heavy frames leave you with very little room for adaptability to use the frame for your shoots whether it be increa

NewBeeDrone CinemAh Frame

Axis Flying

AxisFlying CineON C35 V2 Cinewhoop 3.5" Frame Kit

AxisFlying




The Axisflying CineON C35 V2 Cinewhoop 3.5&quot Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, minimal noise, and up to 9 minutes of flying time.



Be sure to check out all our 3.5&quot frames, and all our Axis Flying Products!
Features

Better wind resistance for smoother footage - C224 Motor, more torque and power

Provide adequate security for the whoop - High performance 40A/F722 AIO

No jello for more stable footage - Triangular shock-absorbing gimbal

The strength has been improved ,don&#39t worry about crash - The frame is fixed with 6 customized M3-7075 standoffs

Reducing the risk of lost drone - The drone and the frame kit are equipped with beeper as standard 

Newly designed ducted aerodynamic layout to effectively reduce flight noise

Independent receiver storage, convenient for binding

Support 12mm/9mm motor mounting

27mm height, compatible with most VTXs


Specifications

Wheelbase: 152mm
Weight: 140.7g
Bottom plate thickness: 2mm
Top plate thickness: 3.5mm
Carbon plate material: T700
Bottom-to-top distance: 27mm
Motor mounting: 9x9mm &ampamp 16x16mm
VTX mounting: 20mm/25.5mm (M2)
Stack mounting: 20mm/25.5mm (M2)

Camera Space: 14~20mm
Prop size: Max 3.5mm 

Includes

1x AxisFlying CineON C35 V2 Cinewhoop 3.5&quot Micro Frame Kit - Clear Gray Prop Guard


The Axisflying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, m

AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard from WREKD Co.

AxisFlying CineON C35 V2 Cinewhoop 3.5

AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard

AXIS FLYING




The Axisflying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit is tailored for cinematic use. This versatile C35 V2 drone is ideal for capturing cinematic shots both indoors and outdoors. With careful market research and input from skilled pilots, Axisflying has created a high-performing drone that offers stable flight, minimal noise, and up to 9 minutes of flying time.



Be sure to check out all our 3.5" frames, and all our Axis Flying Products!
Features

Better wind resistance for smoother footage - C224 Motor, more torque and power

Provide adequate security for the whoop - High performance 40A/F722 AIO

No jello for more stable footage - Triangular shock-absorbing gimbal

The strength has been improved ,don't worry about crash - The frame is fixed with 6 customized M3-7075 standoffs

Reducing the risk of lost drone - The drone and the frame kit are equipped with beeper as standard 

Newly designed ducted aerodynamic layout to effectively reduce flight noise

Independent receiver storage, convenient for binding

Support 12mm/9mm motor mounting

27mm height, compatible with most VTXs


Specifications

Wheelbase: 152mm
Weight: 140.7g
Bottom plate thickness: 2mm
Top plate thickness: 3.5mm
Carbon plate material: T700
Bottom-to-top distance: 27mm
Motor mounting: 9x9mm &amp 16x16mm
VTX mounting: 20mm/25.5mm (M2)
Stack mounting: 20mm/25.5mm (M2)

Camera Space: 14~20mm
Prop size: Max 3.5mm 

Includes

1x AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray Prop Guard


AxisFlying CineON C35 V2 Cinewhoop 3.5" Micro Frame Kit - Clear Gray P

Flywoo

Flywoo FlyLens 85 O3 2" 85mm Whoop Frame

FLYWOO













﻿This does not come with LEDs, those need to be bought separately.
The Flywoo FlyLens 85 85mm Whoop Frame provides superior strength and safety with its high-strength PC injection-molded protective ring. The O3\O3Lite Edition has a unique CNC damping platform for recording high-quality video with no jelly effect. It also features a bottom-mounted transmission PC placement compartment, quick-detachable frame for easy separation of parts, and reverse push propeller power for stable flight and longer endurance. You have the option to install your own O3, O3 lite, Walksnail, Vista, or HDZero system. Put some 1003 Motors on FlyLens 85 for a more agile build!












Check out the rest of our Whoop Frames &amp Accessories, and all our Flywoo products!




 


 Specifications

Brand: FLYWOO 

Model: Flylens 85

Main Board Thickness: 2mm 

CNC Gimbal Thickness: 1mm 

Protective Ring Material: PC+

Flight Control Hole Position: 25.5x25.5mm

VTX Mounting: 20/25.5mm Motor Hole

Position: 6.6mm/Hole 1.4mm

Propeller Size: 2 inch

Weight: 27g (Standard) \ 25.5g (Lite)

Camera Hole Position (Standard): 20mm

Camera Hole Position (Lite): 18mm

Includes

1x Flywoo FlyLens 85 85mm Whoop Frame - Choose Your Version


﻿This does not come with LEDs, those need to be bought separately. The Flywoo FlyLens 85 85mm Whoop Frame provides superior strength and safety with its high-strength PC injection-molded protective ring. The O3\O3Lite Edition has a unique CNC damping platform for recording high-quality video with no jelly effect. It al

Flywoo FlyLens 85 2" - 85mm Whoop Frame - Choose Your Version

Changelog:2024,01.01 : V1.2 Bottom Plate1：added support for 9mmx9mm motor mounting holes.2024.03.07: V1.3 Bottom Plate1: Reinforce the camera mounting holes for the bottom plate2: Optimize the width between the motor mounting holes and the periphery3: Original Micro-USB port, compatible with Type-C Description: The Fly

FlyLens 85 Frame kit（Standard \ Lite）













﻿This does not come with LEDs, those need to be bought separately.
The Flywoo FlyLens 85 85mm Whoop Frame provides superior strength and safety with its high-strength PC injection-molded protective ring. The O3\O3Lite Edition has a unique CNC damping platform for recording high-quality video with no jelly effect. It also features a bottom-mounted transmission PC placement compartment, quick-detachable frame for easy separation of parts, and reverse push propeller power for stable flight and longer endurance. You have the option to install your own O3, O3 lite, Walksnail, Vista, or HDZero system. Put some 1003 Motors on FlyLens 85 for a more agile build!












Check out the rest of our Whoop Frames &ampamp Accessories, and all our Flywoo products!




 


 Specifications

Brand: FLYWOO 

Model: Flylens 85

Main Board Thickness: 2mm 

CNC Gimbal Thickness: 1mm 

Protective Ring Material: PC+

Flight Control Hole Position: 25.5x25.5mm

VTX Mounting: 20/25.5mm Motor Hole

Position: 6.6mm/Hole 1.4mm

Propeller Size: 2 inch

Weight: 27g (Standard) \ 25.5g (Lite)

Camera Hole Position (Standard): 20mm

Camera Hole Position (Lite): 18mm

Includes

1x Flywoo FlyLens 85 85mm Whoop Frame - Choose Your Version


Flywoo FlyLens 85 2" - 85mm Whoop Frame - Choose Your Version from WREKD Co.

Flywoo FlyLens 85 2

BetaFPV Pavo Pico HD 81mm Cinewhoop Frame












Pavo Pico is the tiniest 2S Sub100g DJI O3 Cinewhoop frame, working with other popular HD digital VTX such as Walksnail Avatar Pro Kit, Vista Kit, etc. After testing with pilots, this frame has been upgraded by lowering the battery slot height and adding filters and camera protection parts. These updates enhance the camera and HD digital VTX, to give pilots an unparalleled flying experience.
The Pavo Pico is an all-new HD 81mm cinewhoop with 45mm props that is designed to be the smallest 2S-3S, sub100g build.











Check out the rest of our micro frames and the rest of our BetaFPV gear!


Features


HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.

Incorporating an angle-limited lens protection print and DJI O3 series filters, It is recommended to purchase, which can increase safety and improve visual quality.
The Rubber Damper Vibration damping design reduces low-frequency vibrations and is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods. Additionally, larger batteries can be installed by using battery straps or printed components.
The DJI O3 can be directly installed, while Avatar and Vista require a 20x20 mounting plate and screws (included) for fixation. The naked frame is suitable for users who DIY refit and assemble the HD VTX by themselves.
We offer a wider range of colors for the Pavo Pico frames, giving you even more options to choose from. Whether you prefer a bold and bright hue or a more subdued shade, we have a color that will suit your style. You can choose your favorite color or collect them all to create your own unique mix-and-match cinewhoop.




Pavo Pico Frame Kit

We used ultra-light PP material to make the HD VTX mounting bracket, increasing its toughness. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera's installation height has been lowered with a protective printed part to limit its movable angle to within 30°. Additionally, an O3 filter can be used to protect the lens and enhance image quality. We have incorporated a unique rubber damper vibration-damping design, used with GyroFlow stabilization software, which greatly enhances safety and ensures a smooth, HD image output. When you screw the die-cast screws, please DO NOT screw them too tight to leave room for rubber dampers to absorb vibration. It may cause jello in the video footage.
Click to watch the installation guide video for DJI O3 Air Unit on Pavo Pico.

And The whoop quadcopter package includes the DJI O3 HD Digital VTX Antenna Mount.

DJI O3 Vibration Problem
To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.

Troubleshooting
To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball.
The Jello effect may occur during the above installation due to 2 reasons:



The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose.
If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary.


Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller's rotation.
Upgrade Low Profile Design
After collecting feedback through the BETA TEST, we lowered the height of the HD VTX mounting bracket and whoop duct from 60.6mm to 51.5mm and the battery compartment results in a more low profile on the cinewhoop. 

Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components, allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow:

Specification

Item: Pavo Pico Brushless Whoop Frame
Material: PA12
Wheelbase: 80.8mm
Battery Slot Size: 16mmx12.7mm
Camera Installation Spacing: 19mm/20mm
Color: Black
Weight: 11.62g
Motor Mounting Hole Position: 3-M1.4-φ6.6mm
FC Pattern: 26×26mm, suitable for F4 1S 12A AIO Brushless FC V3

Includes

1x BetaFPV Pavo Pico HD 81mm  Cinewhoop Frame (HD Digital Version) - Black


Pavo Pico is the tiniest 2S Sub100g DJI O3 Cinewhoop frame, working with other popular HD digital VTX such as Walksnail Avatar Pro Kit, Vista Kit, etc. After testing with pilots, this frame has been upgraded by lowering the battery slot height and adding filters and camera protection parts. These updates enhance the ca

BetaFPV Pavo Pico HD 81mm  Cinewhoop Frame (HD Digital Version) - Black

BetaFPV Pavo Pico HD 81mm Cinewhoop Frame (HD Digital Version) - Black












Pavo Pico is the tiniest 2S Sub100g DJI O3 Cinewhoop frame, working with other popular HD digital VTX such as Walksnail Avatar Pro Kit, Vista Kit, etc. After testing with pilots, this frame has been upgraded by lowering the battery slot height and adding filters and camera protection parts. These updates enhance the camera and HD digital VTX, to give pilots an unparalleled flying experience.
The Pavo Pico is an all-new HD 81mm cinewhoop with 45mm props that is designed to be the smallest 2S-3S, sub100g build.











Check out the rest of our micro frames and the rest of our BetaFPV gear!


Features


HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.

Incorporating an angle-limited lens protection print and DJI O3 series filters, It is recommended to purchase, which can increase safety and improve visual quality.
The Rubber Damper Vibration damping design reduces low-frequency vibrations and is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods. Additionally, larger batteries can be installed by using battery straps or printed components.
The DJI O3 can be directly installed, while Avatar and Vista require a 20x20 mounting plate and screws (included) for fixation. The naked frame is suitable for users who DIY refit and assemble the HD VTX by themselves.
We offer a wider range of colors for the Pavo Pico frames, giving you even more options to choose from. Whether you prefer a bold and bright hue or a more subdued shade, we have a color that will suit your style. You can choose your favorite color or collect them all to create your own unique mix-and-match cinewhoop.




Pavo Pico Frame Kit

We used ultra-light PP material to make the HD VTX mounting bracket, increasing its toughness. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera&#39s installation height has been lowered with a protective printed part to limit its movable angle to within 30°. Additionally, an O3 filter can be used to protect the lens and enhance image quality. We have incorporated a unique rubber damper vibration-damping design, used with GyroFlow stabilization software, which greatly enhances safety and ensures a smooth, HD image output. When you screw the die-cast screws, please DO NOT screw them too tight to leave room for rubber dampers to absorb vibration. It may cause jello in the video footage.
Click to watch the installation guide video for DJI O3 Air Unit on Pavo Pico.

And The whoop quadcopter package includes the DJI O3 HD Digital VTX Antenna Mount.

DJI O3 Vibration Problem
To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.

Troubleshooting
To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball.
The Jello effect may occur during the above installation due to 2 reasons:



The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose.
If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary.


Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller&#39s rotation.
Upgrade Low Profile Design
After collecting feedback through the BETA TEST, we lowered the height of the HD VTX mounting bracket and whoop duct from 60.6mm to 51.5mm and the battery compartment results in a more low profile on the cinewhoop. 

Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components, allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow:

Specification

Item: Pavo Pico Brushless Whoop Frame
Material: PA12
Wheelbase: 80.8mm
Battery Slot Size: 16mmx12.7mm
Camera Installation Spacing: 19mm/20mm
Color: Black
Weight: 11.62g
Motor Mounting Hole Position: 3-M1.4-φ6.6mm
FC Pattern: 26×26mm, suitable for F4 1S 12A AIO Brushless FC V3

Includes

1x BetaFPV Pavo Pico HD 81mm  Cinewhoop Frame (HD Digital Version) - Black


BetaFPV Pavo Pico HD 81mm  Cinewhoop Frame (HD Digital Version) - Black from WREKD Co.

Luma Quad

Luma Quads Luma 30 Cinewhoop 3" Frame Kit

Luma Quads












The Luma 30 is an ultra-lightweight and super high-performance 3&quot cinewhoop that can be powered by the same 6S setup as its predecessor, the Luma 3, while still being able to carry a full-size GoPro. It has the same symmetrical bolt patterns on its top and bottom plates that allow it to be built in &quotpuller&quot or &quotpusher&quot configurations, plus a 15mm slammed deck height for a low center of gravity and room for O3 Air Unit, Vista or analog VTX. Weighing just 85g (Frame hardware and prints) and 238g when fully built (without Gopro), it offers longer flight times and improved maneuverability over other 3&quot whoops. The only drawback is the durability of the injection-molded guards, which will break if you hit anything hard. To make sure customers are satisfied, they have included five guards in each kit. This version comes with black ducts and blue tpu.
Check out our selection of 3&quot Frame Kits as well as our Luma Quads Products!











Features

HD Vista / analog compatible.
Slammed 15mm stack height.
Both Mini, Micro, and Nano FPV camera mounts are included - supporting all FPV cameras from 20-14mm.
Support for all 3&quot propellers.
Front Standard GoPro mount (suits any GoPro mounting style camera)
Symmetrically designed to be built in either &quotPuller&quot or &quotPusher&quot configurations.  
Both SMA and Vista/ Airunit 03 Rear mount with VTX antenna and Immortal T Style Antenna Mount included.
Download the 3d model .stl files for this kit here.

Come on, can any other 3&quot Cinewhoop do moves like this?

 
The Ideal setup

  Specifications

Stack Mounting: 20x20mm and 25.5x25.5mm

Rear Mounting: 20x20mm 
Motor Mount Pattern: 12x12mm M2 &ampamp 16x16mm M3

Top Plate Thickness: 2mm
Bottom Plate Thickness: 2.5mm
Motor to Motor: 157.5mm

Frame Weight: 85g  (238g built with no battery or HD cam)


Includes

1x Luma Quads Luma 30 Cinewhoop 3&quot Micro Frame Kit - Black


LUMA 30 FRAME ASSEMBLY GUIDE. V1.0



Kit contents:
HARDWARE BAG BREAKDOWN:





Bag A - MAIN
Quantity




M2 8mm Bolt

12x


M2 15mm Standoff
6x








Bag B - STACK




M2 14mm Bolt
4x




M2 Plastic Nut

4x






Bag C - REAR STACK





M2 18mm Bolt

4x




M2 Steel Nut

4x






Bag D - MOTORS





M2 10mm Bolt
16x


M2 Washer
16x








Bag E - HD MOUNT




M2 8mm Bolt
2x


M2 10mm Bolt
2x


M2 Steel Nut
4x


M2 Steel Washer 
4x


M5 Steel Nut
1x










CARBON PARTS.




2mm Top-plate
1x


2.5mm Bottom-plate
1x





3D PRINTED PARTS.





Front FPV Camera mounts
2x


Front GoPro Hard-mount
1x


Rear Immortal T &ampamp Vista Antenna Mount
1x


Rear Immortal T &ampamp SMA Antenna Mount
1x


25.5x25.5 Stack RX Mount
1x


Rear 20x20 Analog RX/VTX Mount
1x






Plastic Parts.




3&quot Prop Guards
6x




Extras.





Zipties
4x


Luma 250mm Lipo Strap.
2x






Assembly guide.
The Luma 30 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 30 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M5 Steel Nut into the GP mount as shown.


 
Secure the Gopro mount to the top plate using 2x 8mm M2 bolts washers and steel nuts through the front 2 holes of the mount.



2) Main Frame.
Install 6x 15mm Standoff onto bottom plate.

 
Secure with 6x 8mm M2 bolts from below.
 
 
Insert front FPV camera mounts over front 2 standoffs. 
 
Insert Rear antenna mount over rear 2 standoffs.

Align top plate over the standoffs

Secure with 4x 8mm M2 bolts

Insert 2 more 8mm bolts with M2 washers through the back 2 holes on the GoPro mount into the middle two standoffs.
 
3) Prop Guards and bumpers
Align and orientate the prop guards as shown.


 
Secure the guards and bumpers using 16x 10mm M2 bolts and M2 washers. 
These are screwed through the bumpers, carbon plate and guards into the base of the motors.
NOTE: M2 BOLTS HAVE SKINNY CAPHEADSDO NOT FORGET TO INSTALL THE WASHERS!DEPENDING ON WHAT MOTORS YOU RUN IT MAY BE NESSASARY TO EXPAND THE CENTER HOLE IN THE GUARDSBY A FRACTION OF A MM TO ALLOW THE BASE SCREW TO SPIN FREELY.
BE SURE NOT TO LET THE MOTOR BOLTS TOUCH THE WINDINGS OF THE MOTORS 
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties. 
5) Other
The included 25.5x25.5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted..

The Luma 30 is an ultra-lightweight and super high-performance 3" cinewhoop that can be powered by the same 6S setup as its predecessor, the Luma 3, while still being able to carry a full-size GoPro. It has the same symmetrical bolt patterns on its top and bottom plates that allow it to be built in "puller" or "pusher"

Luma Quads Luma 30 Cinewhoop 3" Micro Frame Kit from WREKD Co.

Luma Quads Luma 30 Cinewhoop 3

Luma Quads Luma 30 Cinewhoop 3" Micro Frame Kit












The Luma 30 is an ultra-lightweight and super high-performance 3" cinewhoop that can be powered by the same 6S setup as its predecessor, the Luma 3, while still being able to carry a full-size GoPro. It has the same symmetrical bolt patterns on its top and bottom plates that allow it to be built in "puller" or "pusher" configurations, plus a 15mm slammed deck height for a low center of gravity and room for O3 Air Unit, Vista or analog VTX. Weighing just 85g (Frame hardware and prints) and 238g when fully built (without Gopro), it offers longer flight times and improved maneuverability over other 3" whoops. The only drawback is the durability of the injection-molded guards, which will break if you hit anything hard. To make sure customers are satisfied, they have included five guards in each kit. This version comes with black ducts and blue tpu.
Check out our selection of 3" Frame Kits as well as our Luma Quads Products!











Features

HD Vista / analog compatible.
Slammed 15mm stack height.
Both Mini, Micro, and Nano FPV camera mounts are included - supporting all FPV cameras from 20-14mm.
Support for all 3" propellers.
Front Standard GoPro mount (suits any GoPro mounting style camera)
Symmetrically designed to be built in either "Puller" or "Pusher" configurations.  
Both SMA and Vista/ Airunit 03 Rear mount with VTX antenna and Immortal T Style Antenna Mount included.
Download the 3d model .stl files for this kit here.

Come on, can any other 3" Cinewhoop do moves like this?

 
The Ideal setup

  Specifications

Stack Mounting: 20x20mm and 25.5x25.5mm

Rear Mounting: 20x20mm 
Motor Mount Pattern: 12x12mm M2 &amp 16x16mm M3

Top Plate Thickness: 2mm
Bottom Plate Thickness: 2.5mm
Motor to Motor: 157.5mm

Frame Weight: 85g  (238g built with no battery or HD cam)


Includes

1x Luma Quads Luma 30 Cinewhoop 3" Micro Frame Kit - Black


LUMA 30 FRAME ASSEMBLY GUIDE. V1.0



Kit contents:
HARDWARE BAG BREAKDOWN:





Bag A - MAIN
Quantity




M2 8mm Bolt

12x


M2 15mm Standoff
6x








Bag B - STACK




M2 14mm Bolt
4x




M2 Plastic Nut

4x






Bag C - REAR STACK





M2 18mm Bolt

4x




M2 Steel Nut

4x






Bag D - MOTORS





M2 10mm Bolt
16x


M2 Washer
16x








Bag E - HD MOUNT




M2 8mm Bolt
2x


M2 10mm Bolt
2x


M2 Steel Nut
4x


M2 Steel Washer 
4x


M5 Steel Nut
1x










CARBON PARTS.




2mm Top-plate
1x


2.5mm Bottom-plate
1x





3D PRINTED PARTS.





Front FPV Camera mounts
2x


Front GoPro Hard-mount
1x


Rear Immortal T &amp Vista Antenna Mount
1x


Rear Immortal T &amp SMA Antenna Mount
1x


25.5x25.5 Stack RX Mount
1x


Rear 20x20 Analog RX/VTX Mount
1x






Plastic Parts.




3" Prop Guards
6x




Extras.





Zipties
4x


Luma 250mm Lipo Strap.
2x






Assembly guide.
The Luma 30 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 30 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M5 Steel Nut into the GP mount as shown.


 
Secure the Gopro mount to the top plate using 2x 8mm M2 bolts washers and steel nuts through the front 2 holes of the mount.



2) Main Frame.
Install 6x 15mm Standoff onto bottom plate.

 
Secure with 6x 8mm M2 bolts from below.
 
 
Insert front FPV camera mounts over front 2 standoffs. 
 
Insert Rear antenna mount over rear 2 standoffs.

Align top plate over the standoffs

Secure with 4x 8mm M2 bolts

Insert 2 more 8mm bolts with M2 washers through the back 2 holes on the GoPro mount into the middle two standoffs.
 
3) Prop Guards and bumpers
Align and orientate the prop guards as shown.


 
Secure the guards and bumpers using 16x 10mm M2 bolts and M2 washers. 
These are screwed through the bumpers, carbon plate and guards into the base of the motors.
NOTE: M2 BOLTS HAVE SKINNY CAPHEADSDO NOT FORGET TO INSTALL THE WASHERS!DEPENDING ON WHAT MOTORS YOU RUN IT MAY BE NESSASARY TO EXPAND THE CENTER HOLE IN THE GUARDSBY A FRACTION OF A MM TO ALLOW THE BASE SCREW TO SPIN FREELY.
BE SURE NOT TO LET THE MOTOR BOLTS TOUCH THE WINDINGS OF THE MOTORS 
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties. 
5) Other
The included 25.5x25.5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted Analog VTX/RX. 

IMPORTANT:Do not let electrical components come in contact with the carbon, use spacers that came with your with FC stack and the included RX/VTX Mounts to space your components away from carbon.  




Luma Quads Luma 25 Cinewhoop 2.5" Frame Kit












The Luma 25 Frame Kit from Luma Quads is designed for Naked GoPro applications. This modern-designed frame features symmetrical top and bottom plates, where you can be built as a pusher or puller quad. You&#39ll love how light and easy to assemble this kit is, at only 240.5g with a Naked GoPro, Vista, and a 450mah 4S pack, or 208g with an Air unit O3 and no GoPro! A solid frame for those looking to create a 2.5&quot Cinewhoop! This version comes with black ducts and blue tpu.











Check out our selection of micro frames as well as our Luma Quads Products!
Features

Symmetrically designed to be built in either Standard or Pusher configurations.  
O3 Air Unit, Mini, Micro and Nano FPV camera options included.

HD Vista/Air Unit 03 / Analog compatible.
Slammed 15mm stack height.

Sub 250g AUW (inc Naked GP and 4S 450mah).

Support for 2.5&quot propellers. 
Front Standard GoPro mount (suits any GoPro style camera mount)

Download the 3D model .stl files for this kit here.






Kit includes DJI Air Unit O3 Mounts




Specifications

Stack Mounting: 20x20mm and 25.5x25.5mm

Rear Mounting: 20x20mm and 25.5x25.5mm
Motor Mount Pattern: 9x9mm

Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Motor to Motor: 129mm 

Frame Weight: 62g 


Includes

1x Luma Quads Luma 25 Cinewhoop 2.5&quot Micro Frame Kit

LUMA 25 FRAME ASSEMBLY GUIDE. V1.0





Kit contents:
HARDWARE BAG BREAKDOWN:





Bag A - MAIN
Quantity




M2 8mm Bolt

4x


M2 15mm Standoff
4x








Bag B - STACK




M2 14mm Bolt
4x




M2 Plastic Nut

4x






Bag C - REAR STACK





M2 20mm Bolt

4x




M2 Steel Nut

4x






Bag D - MOTORS





M2 6mm
16x








Bag E - HD MOUNT




M2 8mm Bolt
5x


M2 Steel Nut
5x


M2 Steel Washer 
5x


M3 16mm Bolt
1x


M3 Steel Nut
1x


M3 Steel Washer
4x










CARBON PARTS.




2mm Top-plate
1x


2.5mm Bottom-plate
1x




3D PRINTED PARTS.





Front FPV Camera mounts
2x


Front GoPro Hard-mount
1x


Rear Immortal T &ampamp Vista Antenna Mount
1x


25.5x25.5 Stack RX Mount
1x


Rear 20x20 Analog RX/VTX Mount






Plastic Parts.




 2.5&quot Prop Guards
5x




Extras.





Zipties
4x


130mm x 12mm Battery strap.
1x






Assembly guide.
The Luma 25 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 25 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M3 Steel washer into the GPLite mount as shown.

Insert 2x Washers into the HD Cam Mount.

Align GPLite mount up with HD Mount, Insert M3 Nut into HD Mount.

Insert M3 16mm Bolt through M3 washer into HD Mount and secure with M3 nut.

Insert 4x M2 8mm Bolts through 4x M2 Washers.

Insert M2 Bolts and Washers through HD Cam Mount.

Install HD mount assembly onto Top Plate.

Secure HD Mount to Top plate using 4x M2 Steel nuts.

2) Main Frame.
 Insert 4x 14mm M2 standoffs into TPU Front camera and Rear antenna mount.

Align with bottom plate.

Insert 8x 8mm Bolts through the Top and Bottom plates into the standoffs.

3) Prop Guards
Align and orientate the prop guards as shown.

Secure using the included 6mm Motor screws through the bottom plate through the guard into the base of the motor.
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties. 
5) Other
The included 25.5x25,5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted Analog VTX/RX. 

IMPORTANT:Do not let electrical components come in contact with the carbon, use spacers that came with your with FC stack and the included RX/VTX Mounts to space your components away from carbon.  






The Luma 25 Frame Kit from Luma Quads is designed for Naked GoPro applications. This modern-designed frame features symmetrical top and bottom plates, where you can be built as a pusher or puller quad. You'll love how light and easy to assemble this kit is, at only 240.5g with a Naked GoPro, Vista, and a 450mah 4S pack

Luma Quads Luma 25 Cinewhoop 2.5" Micro Frame Kit from WREKD Co.

Luma Quads Luma 25 Cinewhoop 2.5

Luma Quads Luma 25 Cinewhoop 2.5" Micro Frame Kit












The Luma 25 Frame Kit from Luma Quads is designed for Naked GoPro applications. This modern-designed frame features symmetrical top and bottom plates, where you can be built as a pusher or puller quad. You'll love how light and easy to assemble this kit is, at only 240.5g with a Naked GoPro, Vista, and a 450mah 4S pack, or 208g with an Air unit O3 and no GoPro! A solid frame for those looking to create a 2.5" Cinewhoop! This version comes with black ducts and blue tpu.











Check out our selection of micro frames as well as our Luma Quads Products!
Features

Symmetrically designed to be built in either Standard or Pusher configurations.  
O3 Air Unit, Mini, Micro and Nano FPV camera options included.

HD Vista/Air Unit 03 / Analog compatible.
Slammed 15mm stack height.

Sub 250g AUW (inc Naked GP and 4S 450mah).

Support for 2.5" propellers. 
Front Standard GoPro mount (suits any GoPro style camera mount)

Download the 3D model .stl files for this kit here.






Kit includes DJI Air Unit O3 Mounts




Specifications

Stack Mounting: 20x20mm and 25.5x25.5mm

Rear Mounting: 20x20mm and 25.5x25.5mm
Motor Mount Pattern: 9x9mm

Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Motor to Motor: 129mm 

Frame Weight: 62g 


Includes

1x Luma Quads Luma 25 Cinewhoop 2.5" Micro Frame Kit

LUMA 25 FRAME ASSEMBLY GUIDE. V1.0





Kit contents:
HARDWARE BAG BREAKDOWN:





Bag A - MAIN
Quantity




M2 8mm Bolt

4x


M2 15mm Standoff
4x








Bag B - STACK




M2 14mm Bolt
4x




M2 Plastic Nut

4x






Bag C - REAR STACK





M2 20mm Bolt

4x




M2 Steel Nut

4x






Bag D - MOTORS





M2 6mm
16x








Bag E - HD MOUNT




M2 8mm Bolt
5x


M2 Steel Nut
5x


M2 Steel Washer 
5x


M3 16mm Bolt
1x


M3 Steel Nut
1x


M3 Steel Washer
4x










CARBON PARTS.




2mm Top-plate
1x


2.5mm Bottom-plate
1x




3D PRINTED PARTS.





Front FPV Camera mounts
2x


Front GoPro Hard-mount
1x


Rear Immortal T &amp Vista Antenna Mount
1x


25.5x25.5 Stack RX Mount
1x


Rear 20x20 Analog RX/VTX Mount






Plastic Parts.




 2.5" Prop Guards
5x




Extras.





Zipties
4x


130mm x 12mm Battery strap.
1x






Assembly guide.
The Luma 25 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 25 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M3 Steel washer into the GPLite mount as shown.

Insert 2x Washers into the HD Cam Mount.

Align GPLite mount up with HD Mount, Insert M3 Nut into HD Mount.

Insert M3 16mm Bolt through M3 washer into HD Mount and secure with M3 nut.

Insert 4x M2 8mm Bolts through 4x M2 Washers.

Insert M2 Bolts and Washers through HD Cam Mount.

Install HD mount assembly onto Top Plate.

Secure HD Mount to Top plate using 4x M2 Steel nuts.

2) Main Frame.
 Insert 4x 14mm M2 standoffs into TPU Front camera and Rear antenna mount.

Align with bottom plate.

Insert 8x 8mm Bolts through the Top and Bottom plates into the standoffs.

3) Prop Guards
Align and orientate the prop guards as shown.

Secure using the included 6mm Motor screws through the bottom plate through the guard into the base of the motor.
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties. 
5) Other
The included 25.5x25,5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted Analog VTX/RX. 

IMPORTANT:Do not let electrical components come in contact with the carbon, use spacers that came with your with FC stack and the included RX/VTX Mounts to space your components away from carbon.  






DarwinFPV

DarwinFPV CineApe 25 Cinewhoop 2.5" Frame Kit

The CineApe 25 frame is the first inverted 2.5-inch cinematic whoop frame of DarwinFPV. The frame is composed of upper and lower layers of carbon plates and a high-strength injection molding ring, with an advanced appearance. In addition, to enhance the durability of the frame, we have also added additional reinforcement to the injection-molded boot, which now excels in crash protection.
The CineApe 25 Frame Kit is a cost-effective cinewhoop frame with tough, injection-molded prop guards to ensure your electronics are safe in the event of a crash. With a quick-release design, repairs on the go are made easy and the frame layout is great for AIO boards. 
Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at WREKD!
Features

Comes with a high-strength one-piece injection-molded propeller guard, which has higher safety, a stronger and more durable frame, and also reduces the probability of risk, so you have more confidence to fly.
It is used the front Type-C parameter adjustment port, with DARWIN parameter adjustment adapter board, easy to adjust parameters.
It comes with a quick-release frame design that only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently.
Compared with the same type of frames, our CineApe 25 frame has added multiple battery strap mounting holes, compatible with 20mm stack mounting holes and 25.5mm AIO mounting holes. The battery anti-skid pad is designed to be extended, which avoids the trouble that the anti-skid pad at the back of the battery is too small to play a non-slip effect when installing the GoPro.
The arms use a strong triangular structure, which is more durable.
The integrated fixed design of the antenna print solves the problem of the traditional antenna moving easily and greatly optimizes the structure of the frame.


 Specifications

Wheelbase: 112mm
Top Plate Hole: 20x20mm，25.5x25.5mm
Bottom Plate Hole: 28x15mm (3 holes)，20x20mm，25.5x25.5mm
Motor Mounting Hole: 9x12mm
Carbon Plate Camera Mounting Hole: 19mm
3D Print Camera Hole:14mm
Weight: 66.7g
Top Plate Thickness: 2.5mm

Includes

1x top plate2.5mm
1x bottom plate 2mm
1x injection molding guard
1x camera mount
1x antenna mount
1x battery anti-skid pad
2x battery cable tie 10x170mm
7x M2x12mm copper standoff
4x M2 nylon nut
6x M2x6 hexagon socket head screw
5x M2x7 hexagon socket head screw
3x M2x10 hexagon socket head screw
4x M2x14 hexagon socket head screw
1x sticker


The CineApe 25 frame is the first inverted 2.5-inch cinematic whoop frame of DarwinFPV. The frame is composed of upper and lower layers of carbon plates and a high-strength injection molding ring, with an advanced appearance. In addition, to enhance the durability of the frame, we have also added additional reinforceme

DarwinFPV CineApe 25 Cinewhoop 2.5" Micro Frame Kit from WREKD Co.

DarwinFPV CineApe 25 Cinewhoop 2.5

DarwinFPV CineApe 25 Cinewhoop 2.5" Micro Frame Kit

The CineApe 25 frame is the first inverted 2.5-inch cinematic whoop frame of DarwinFPV. The frame is composed of upper and lower layers of carbon plates and a high-strength injection molding ring, with an advanced appearance. In addition, to enhance the durability of the frame, we have also added additional reinforcement to the injection-molded boot, which now excels in crash protection.
The CineApe 25 Frame Kit is a cost-effective cinewhoop frame with tough, injection-molded prop guards to ensure your electronics are safe in the event of a crash. With a quick-release design, repairs on the go are made easy and the frame layout is great for AIO boards. 
Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at RaceDayQuads!
Features

Comes with a high-strength one-piece injection-molded propeller guard, which has higher safety, a stronger and more durable frame, and also reduces the probability of risk, so you have more confidence to fly.
It is used the front Type-C parameter adjustment port, with DARWIN parameter adjustment adapter board, easy to adjust parameters.
It comes with a quick-release frame design that only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently.
Compared with the same type of frames, our CineApe 25 frame has added multiple battery strap mounting holes, compatible with 20mm stack mounting holes and 25.5mm AIO mounting holes. The battery anti-skid pad is designed to be extended, which avoids the trouble that the anti-skid pad at the back of the battery is too small to play a non-slip effect when installing the GoPro.
The arms use a strong triangular structure, which is more durable.
The integrated fixed design of the antenna print solves the problem of the traditional antenna moving easily and greatly optimizes the structure of the frame.


 Specifications

Wheelbase: 112mm
Top Plate Hole: 20x20mm，25.5x25.5mm
Bottom Plate Hole: 28x15mm (3 holes)，20x20mm，25.5x25.5mm
Motor Mounting Hole: 9x12mm
Carbon Plate Camera Mounting Hole: 19mm
3D Print Camera Hole:14mm
Weight: 66.7g
Top Plate Thickness: 2.5mm

Includes

1x top plate2.5mm
1x bottom plate 2mm
1x injection molding guard
1x camera mount
1x antenna mount
1x battery anti-skid pad
2x battery cable tie 10x170mm
7x M2x12mm copper standoff
4x M2 nylon nut
6x M2x6 hexagon socket head screw
5x M2x7 hexagon socket head screw
3x M2x10 hexagon socket head screw
4x M2x14 hexagon socket head screw
1x sticker


BetaFPV Beta75X V2 Whoop Frame

Compared with the Beta75X frame, the Beta75X V2 frame only weighs 5.6g, It is lighter and the gravity center of the V2 frame is more concentrated. Increased the height of the frame loop, props can be completely wrapped by the protective ring. A better choice for a 75mm brushless whoop drone. What's more, the Beta75X V2 Frame is specially designed with two different motor mounting holes that support 1102 and 1103 brushless motors.


Bullet Point


The Beta75X V2 frame only weighs 5.6g, it is lighter and the whole drone’s gravity center more concentrated than the Beta75X V1. Meanwhile, the motor mount position uses a quadrilateral stretch structure, makes the frame more durable and stable. 
Increased the height of the frame loop, props are completely wrapped by the protective ring, more effectively protected the propellers.
Designed two different motor mounting holes that support 1102 and 1103 brushless motors at the same time.
With a 26mm*26mm FC mounting columns can match whoop style flight controllers like F4 AIO 12A FC. The battery slot fits BETAFPV 300mAh 2S and 300mAh 3S-S battery.


 Specification

Material: Plastic
Color: Black / White
Weight: 5.6g
Diagonal motor to motor distance: 75mm
Motor mounting hole: for 110x series motors

FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern

Battery slot size: 6.8x16.1mm



Recommended Parts

Propellers: 40mm 4-blade props (1.5mm shaft hole)

Motors: 110x brushless motors, like 1103 11000KV motors

Battery: 3S 300mAh Battery / 2S 300mAh Battery 
FC &amp ESC: F4 1~2S AIO Brushless FC, F4 AIO 12A FC




Package

1 * Beta75X V2 Whoop Frame for 75mm 3S whoop drone



Compared with the Beta75X frame, the Beta75X V2 frame only weighs 5.6g, It is lighter and the gravity center of the V2 frame is more concentrated. Increased the height of the frame loop, props can be completely wrapped by the protective ring. A better choice for a 75mm brushless whoop drone. What's more, the Beta75X V2

Beta75X V2 Micro Brushless Whoop Frame

Compared with the Beta75X frame, the Beta75X V2 frame only weighs 5.6g, It is lighter and the gravity center of the V2 frame is more concentrated. Increased the height of the frame loop, props can be completely wrapped by the protective ring. A better choice for a 75mm brushless whoop drone. What's more, the Beta75X V2 Frame is specially designed with two different motor mounting holes that support 1102 and 1103 brushless motors.
Check out all our whoop frames &amp accessories and all our BetaFPV gear!

Features

The Beta75X V2 frame only weighs 5.6g, it is lighter and the whole drone’s gravity center more concentrated than the Beta75X V1. Meanwhile, the motor mount position uses a quadrilateral stretch structure, makes the frame more durable and stable.
Increased the height of the frame loop, props are completely wrapped by the protective ring, more effectively protected the propellers.
Designed two different motor mounting holes that support 1102 and 1103 brushless motors at the same time.
With a 26mm*26mm FC mounting columns can match whoop style flight controllers like F4 AIO 12A FC. The battery slot fits BETAFPV 300mAh 2S and 300mAh 3S-S battery.

Specifications

Diagonal motor to motor distance: 75mm
Motor mounting hole: for both 3 and 4 hole motors
FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern
Battery slot size: 6.8x16.1mm
Material: Plastic
Weight: 5.6g

Includes

1x BetaFPV Beta75X V2 Whoop Frame - Choose Your Color


Compared with the Beta75X frame, the Beta75X V2 frame only weighs 5.6g, It is lighter and the gravity center of the V2 frame is more concentrated. Increased the height of the frame loop, props can be completely wrapped by the protective ring. A better choice for a 75mm brushless whoop drone. What's more, the Beta75X V2

BetaFPV Beta75X V2 Whoop Frame - Choose Your Color

This frame is ultralight only 5.68g, but it still durable enough. Specially designed the following point.

Compared with the Beta75X frame, the BETAFPV Beta75X V2 frame only weighs 5.6g, It is lighter and the gravity center of the V2 frame is more concentrated. With an increase in the height of the frame loop, props can be completely wrapped by the protec

BETAFPV Beta75X V2 Brushless Whoop Frame 

FPV Cycle

FPV Cycle CineSplore 3" Frame

NEW!!CineSplore Blog containing recommendations and more details about the setupThis is a mega-cinewhoop frame not unlike any other 3” ducted design. It is NOT intended to be an acrobatic machine. It is intended for slow-ish, stable, controlled flight with the payload of a GoPro Hero 8 or similar with a TPU mount. The 

FPVCycle CineSplore Frame

FPVCycle

NEW!!CineSplore Blog containing recommendations and more details about the setupThis is a mega-cinewhoop frame not unlike any other 3” ducted design. It is NOT intended to be an acrobatic machine. It is intended for slow-ish, stable, controlled flight with the payload of a GoPro Hero 8 or similar with a TPU mount. The frame is specifically designed to be lightweight (by comparison to others), durable, easy to build/repair and cost effective to maintain. It has two 20x20 mounting platforms and one Toothpick style whoop board mount (two separate stack platforms). It is designed to fit analog components or the Vista unit. The GoPro/HD mounting platform is the same as on the CineGlide and Fouride. Camera mounts for one will be easy to swap from frame to frame.This platform performs best with the FPVCycle 2203 3450kv motor, 4S 1100mah battery, V2 Ducts, and 25mm standoffs because the V2 Ducts are shorter. The basic ducts are from the CLOUD-149. They provide adequate prop protection/safety for most situations and are decently durable while being extremely cost effective. Unfortunately, even with the genuine FPVCycle 2203 3450kv motor, you will still have some washout in extreme situations and minor yaw lock problems in gusty or confined environments such as a narrow corridor/hallway. The V3 Ducts fix most of these issues and are a bolt on replacement for the original ducts. If you are an experienced FPV pilot with developed fine motor control skills in this area, you will appreciate the V3 Ducts quite a bit. If you are novice to intermediate level, you’ll definitely notice a difference but it may not be quite as significant to you.Compared to a typical Cinewhoop with your standard issue ~1506 and any prop, this platform running FPVCycle 2203 3450kv and the V2 ducts is dramatically improved. The motors account for about 75% of that improvement.  Dropping the standoff height to 25mm is just icing on the cake if you care to do so
Note: Tge ducts do NOT fit the frame perfectly on purpose. When screwed into place the ducts are held under tension and are somewhat oval. When fresh props are inserted, they will rub against that walls of that duct. Arm the quad and get the props spinning, then hover for a few seconds to allow them to grind into place. It will be loud during this process and then it will quiet down considerably. This sort of fit actually improves efficiency a but but more importantly, reduces overall vibrations in the system because it&#39s all held under tension. Again, this imperfection is on purpose and 100% if the ducts do not fit perfectly. 
Print files:GoPro 5, 6, 7, adjustable angle mount

Please please please check your FC orientation, motor orientation and prop orientation BEFORE the first flight. Always test arm with your controller and NO props on and check to make sure everything is working right. Note that this frame is designed to use a whoop board but in a square configuration. Not diamond.  If you are using a whoop board, at the absolute minimum you will need to yaw the board at least 45deg in the flight firmware settings to have it in the correct orientation.  Also, because of how whoop boards mount motors on the corners, it&#39s easy to end up with mixed numbered motors. Remapping motors is not difficult. There will be a video uploadeded to this description page soon with quick details on how to remap. 
 
Details:

55g without ducts
101g with basic ducts
125g with V2 Ducts
155mm diagonal size motor center to motor center
~215mm sideways width from end duct to end of duct
~182mm front to back from end of duct to end of duct
12x12 M2 motor mounting platform ONLY
Two 20x20 stacks or one 20x20 and one Toothpick board
Toothpick/whoop mount fits 25.4x25.4 through 26.5x26.5 size
TPU FPV cam mount made for mini size, will stretch to fit micro too
100% DJI Vista support and strongly encouraged
Recommended motor: FPVCycle 2203 - 3450kv
Recommended prop: Gemfan 75mm Cinewhoop prop

Recommended build:

FPVCycle 2203 motor
Gemfan 3” (75mm) Cinewhoop prop
GoPro/camera mounts
30A 4S good cheap whoop board

V2 Ducts (optional)

V3 Ducts (optional)

25mm standoffs (optional with V2 Ducts)

Click Here for Build Guide
Click Here for Build Guide and Discussion 
 
Video Build Guide:

Installing CineSplore StanFPV Ducts:

FPVCycle CineSplore Frame from WREKD Co.

TBS Ethix Cinerat 3" Frame

Team BlackSheep

TBS Ethix Cinerat 3" Frame Kit (Carbon + Hardware)

TBS Ethix Cinerat 3&quot Frame Kit (Carbon + Hardware)

Introducing the all new 3" CineRat frame, designed to be compatible with 6s and the capability to fit a full 20x20 FC/ESC stack. Allowing enough room for GoPro mounts on both the front and rear of the frame, the CineRat is spacious for its size. The flexibility allows room for the pilot's creativity. The perfect frame 

TBS Ethix CineRat (Carbon & Hardware Parts)

Ethix


Introducing our next product in the flat rat line up is our 3” cine frame. When we looked into what we wanted in a small compact cine frame the main thing that stood out was we didn’t want ducts. So we set out to design a 6s motor (flat rat motors) to complement this frame so that it could haul a full size camera with enough thrust for a 3” props and allow us the add on of just prop guards for safety. With a 3” frame based around 6s we also wanted the ability to carry a full size fc/esc stack with the option of a 20x20 if that’s your thing. There’s the option for GoPro mounts on the front and back as well as a 10deg couch. We added front fpv camera protection  (19x19 size) for those that want to utilize the split cam mounts on the front of the frame and on the bottom of the protection is a slot for mounting your immortal T antenna. We really hope you enjoy using this frame to get creative as much as we do! 
-Eric
INCLUDES

1 x Top Plate
1 x Bottom Plate
1 x Battery Pad
4 x motor plates
7 x Standoffs 
1 x Screws Set
1 x Front Arm
1 x Rear Arm

3D FILES

Download from Thingiverse

 
Full kit and/or 3D prints take 2-3 extra days to ship.

Introducing our next product in the flat rat line up is our 3” cine frame. When we looked into what we wanted in a small compact cine frame the main thing that stood out was we didn’t want ducts. So we set out to design a 6s motor (flat rat motors) to complement this frame so that it could haul a full size camera with 

Ethix CineRat

GEPRC

GEPRC GEP-CL35 CineLog 35 Performance 3.5" Cinewhoop Frame Kit

The GEP-CL35 Performance Frame developed by CEPRC for mounting GoPro camera is now officially released. The CineLog35 Performance frame is improved and optimized on the basis of the CineLog35 frame. It supports the installation of mainstream AIO flight controllers with 25.5mm x 25.5mm holes. The mounting holes for 20mm

GEPRC GEP-CL35 Performance 3.5

The CineLog35 Performance frame is improved and optimized on the basis of the CineLog35 frame. 

#html-body [data-pb-style=Q1B0GD0]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=ENMVGQX]{display:no

GEPRC CineLog 35 P 3.5" Cinewhoop Drone Frame Kit - Performance Edition

GEPRC CineLog 35 P 3.5&quot Cinewhoop Drone Frame Kit - Performance Edition

iFlight ProTek60 Pro 6" Cinelifter Frame 

Almost as if it came out of the "honey, I shrunk the kids" movie from 1989. Things are getting big! Let's introduce our latest member to our ProTek family, the all-new iFlight ProTek60 Cinelifter! We've came a long way with action cameras, offering outstanding quality with little weight and a small footprint. But do yo

iFlight ProTek60 Pro 6inch Cinelifter Frame Kit - Choose Cam Plate

Lumenier

Lumenier QAV-PRO 5" Whoop Frame

This Frame Kit is for the Lumenier QAV-PRO WHOOP Cinequads Edition, which is a versatile 5-inch caged FPV quadcopter that is designed to be durable and agile while offering full propeller protection and the ability to carry full-sized cinema cameras.

The Lumenier QAV-PRO WHOOP Cinequads Edition Kit is a versatile 5-inch caged FPV quadcopter that is designed to be durable and agile while offering full propeller protection. This whoop has the incredible ability to carry full-sized profess

Lumenier QAV-PRO Whoop 5" Cinequads Edition - Frame Kit

Lumenier QAV-PRO Whoop 5&quot Cinequads Edition - Frame Kit

The Lumenier QAV-PRO WHOOP Cinequads Edition Kit is a versatile 5-inch caged FPV quadcopter that is designed to be durable and agile while offering full propeller protection. This whoop has the incredible ability to carry full-sized professional cinema cameras, such as the Blackmagic Cinema Pocket 4K or the RED KOMODO 

Lumenier QAV-PRO Whoop 5

GEPRC GEP-CL30 CineLog 30 3" Frame

This GEP-CL30 Frame kit is for the GEPRC CineLog30 cinewhoop.

This GEP-CL30 Frame kit is for the GEPRC CineLog30 cinewhoop.
Designed by the GEPRC team, this frame can be used for Vista HD digital image transmission systems or Analog image transmission systems. 
Developed by GEPRC, the CineLog30 is o

GEPRC CineLog 30 3" GEP-CL30 Frame Kit

GEPRC CineLog 30 3&quot GEP-CL30 Frame Kit

Summary：
The latest 3-inch rack CL30 developed by GEPRC is now officially released.
CL30 is improved and developed on the basis of CL25. It continues the 26.5x26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the market. The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades. Improved the shock absorption design of the damping platform to provide more stable shooting effect.Ultra-light body weight. Naked camera GP8 and Insta 360 Go2 camera can be installed with GP camera mount.
We pursue lighter body weight, better flying feel, and more extended functions frame.

Specification:

 	Brand: GEPRC
 	Model: GEP-CL30
 	Motor to Motor: 126mm
 	Top plate: 2.0mm
 	Bottom plate: 2.0mm
 	Arm Plate3.0mm
 	FC mounting hole: 25.5mm x 25.5mm
 	VTX hole position: 20mm x 20mm
 	Motor hole position: 9mm x 9mm
 	Camera installation space: 14~19mm
 	Propeller guard internal diameter: 79mm
 	Suitable propeller size: 3 in propeller
 	Dimension: 180mm x 180mm x 38mm（Includes propeller guard）
 	Weight:62.6g（Includes propeller guard, GP camera mount, 3D printings）

Feature:

 	
Small size, light weight, good flying feel.

 	
Improved the shock absorption design of the damping platform to provide a more stable shooting effect.

 	
The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades.

 	
Naked camera GP8 and Insta 360 Go2 camera can be installed with GP camera mount.

 	
A 3D print is designed for the receiver to facilitate the installation and binding of the receiver.


Include:
Carbon Plate:

 	1 x Top Plate 2.0mm
 	1 x Arm Plate 3.0mm
 	1 x bottom Plate 2.0mm

Screws:

 	2 x Knurled nut M2
 	4 x Aluminum Column M2x3.5x25
 	2 x M2x4mm cup head screws
 	28 x M2x6.5mm round head screws
 	10 x M2x8mm round head screws
 	7 x M2x9mm round head screws
 	4 x M2x10mm round head screws
 	1 x M2x12mm cup head screw
 	4 x M2x16mm cup head screws
 	1 x M2 Rivet nut
 	4 x M2 Lock nuts
 	8 x M2 Iron nuts
 	8 x M2 * 6.5mm damping rings
 	9 x damping platform rings

3D Printings:

 	1 x 19x19mm Camera Mount
 	1 x VTX Antenna Mount
 	1 x TBS T-shaped Antenna Mount
 	1 x TBS NanoRX Mount
 	1 x Camera Protector

Injection Parts:

 	6 x 3 in Propeller Guard
 	1 x GP Camera Mount

Other Parts:

 	4 x EVA Damping Ring of Guards
 	2 x 3M Double Tapes
 	2 x Silicone Pads
 	2 x Landing Pads
 	1 x M15x200mm Battery Strap
 	1 x M15x150mm Battery Strap
 	1 x L-shaped (1.5mm)
 	1 x Antenna Tubes

Summary： The latest 3-inch rack CL30 developed by GEPRC is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the [...]

GEP-CL30 Frame Kits - GEPRC

GEP-CL30 Frame Kits

framesThe latest 3-inch rack CL30 developed by GEPU is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the mark

GEPRC GEP-CL30 Cinewhoop 3

GEPRC GEP-CL25 CineLog 25 2.5" Frame

Summary
GEP-CL25 Frame is designed by GEPRC team. It can be used for Vista HD digital image transmission system or Analog image transmission system.The center of gravity of the quadcopter is in the middle,Redesigned the shock absorption structure of the camera mount and GP Lite camera, Eliminated the jello of the camera and FPV camera, and we can use 3, 4 and 5 damping rings according to the flight state to obtain the best stability in vibration and noise.
Specification

 	Brand: GEPRC
 	Item: GEP-CL25 Frame
 	Motor to Motor: 109mm
 	Internal diameter of Guard: 2.5inch
 	Camera size: 19~20mm
 	Propeller: 2.5inch
 	The hole size of Motor: 9mm ( Compatible with 1105/1204/1206Motor)
 	FC mounting hole: 25.5*25.5mm
 	Thickness of Top Plate: 2.5mm
 	Thickness of Bottom Plate: 1.5mm
 	Thickness of Bottom Plate(camera): 2mm
 	Weight: 47.8 Grams

Include: 

 	1 x Top plate 2.5mm
 	1 x Bottom plate 1.5mm
 	1 x Bottom Plate(Camera)1.5mm
 	4 x（M2*3.5*25mm）Aluminum posts
 	2 x（M2*3.5*8mm）Aluminum posts
 	28 x（M2*6mm）YFS Round head screws
 	2 x（M2*8mm）YFS Round head screws
 	4 x（M2*12mm）YFS countersunk head screws
 	16 x（M2*2mm）Nylon Nuts
 	4 x（M2*18mm）YFS countersunk head screws
 	5 x Damping Rings
 	1 x（19*19mm）Mount of camera
 	1 x（14*14mm）Mount of camera
 	1 x 3D print part of XM antenna
 	1 x 3D print part of TBS antenna
 	1 x Naked Camera Base
 	2 x Batteries pads
 	2 x EVA Landing pads
 	4 x 2.5inch Guards
 	1 x EVA Damping Ring of Guard
 	2 x Antenna Tubes
 	2 x Batteries straps (M15*150mm）

Summary GEP-CL25 Frame is designed by GEPRC team. It can be used for Vista HD digital image transmission system or Analog image transmission system.The center of gravity of the quadcopter is in the middle,Redesigned the shock absorption structure of the camera mount and GP Lite camera, Eliminated the jello of the camera and FPV camera, [...]

GEP-CL25 Frame - GEPRC

GEP-CL25 Frame

GEP-CL25 Frame is designed by GEPRC team. It can be used for Vista HD digital image transmission system or Analog image transmission system.The center of gravity of the quadcopter is in the middle,Redesigned the shock absorption structure of the camera mount and GoPro Lite, Eliminated the jelly of the camera and FPV ca

GEPRC GEP-CL25 Cinewhoop 2.5

Shen Drones

Shen Drones Terraplane Bigger Cinewhoop Frame

The Shendrones is a 189mm ducted quad that uses 85mm props (10mm bigger than standard Cinewhoop). It has low profile molded ducts for low drag, and uses larger 2207.5 2500kv motors for more power and authority. You can check out our complete Cinewhoop Frames Collection! Spare Ducts can be purchased separately, Availabl

Shen Drones Terraplane Bigger Cinewhoop Frame 189mm with HQ 85mm Hexblades

HGLRC

HGLRC Sector25 2.5" Cinewhoop/Freestyle Frame

HGLRC Sector25CR 2.5 inches FPV Ultralight Cinewhoop / Freestyle Frame with ducts! Check out all our Sector25 Parts &amp; Accessories and the rest of our HGLRC Products! Features:  *Supports (20x20-25.5x25.5) mounting holes *Supports both AIO/stack installing at the same time,, ultra-light weight and have a super long 

HGLRC Sector25CR 2.5 inches FPV Ultralight Cinewhoop / Freestyle Frame

A superlight 2.5" cinewhoop frame from HGLRC.

A superlight cinewhoop frame from HGLRC. Use with the included ducts or remove them for extra weight savings. Configure it however you want with multiple electronics stack mounting options!
Features

Supports (20x20-25.5x25.5) mounting holes
Supp

HGLRC Sector25CR 2.5" Cinewhoop Frame

HGLRC Sector25CR 2.5&quot Cinewhoop Frame

Propeller Size

The props work with the motors to lift your quad off the ground.  Choose a prop size that fits your frame.  Higher pitch props are efficient in fast environments and are less responsive in slow speeds. Lower pitch props are efficient in slower environments and are more responsive in slow speeds. Beginners should try various pitch props to see what works best for them. 

Propellers

Motor Stator Size

The motors spin with the propellers to lift your quad off the ground. If you’ve picked a frame already, we show you which motors are appropriate for your frame. Beginners can choose motors with a similar stator size that others have used for the frame you’ve selected. Alternatively, calculate the thrust required for a particular thrust-to-weight ratio and learn to read motor thrust tables to select the best motors for your needs. 

Motors

ESC Stack Mount

The ESC(s) controls your motors’ speed. It draws power from the battery to spin the motors based on what the FC tells it to do. Each motor needs an ESC. It’s common today to see 4-in-1 ESCs so you only need to buy a single part. For beginners, choose a 4-in-1 ESC that has a compatible mount with your frame and FC. The biggest consideration is amperage limit. We show you ESCs with appropriate amperage limits based on your frame size. You can calculate how much amperage you need based on your motor and prop choice. 

ESCs

FC Stack Mount

The FC is the brain or the CPU of your quad. It has a processor and other components that allow it to listen to your inputs and tells the quad what to do. FCs are commonly sold together with other components integrated or stacked (like ESCs and video transmitters). For beginners, choose a FC with a F4 or F7 processor that has a compatible mount with your frame. 

Flight Controllers

Camera Size

The FPV camera captures the image you see through the goggles. An FPV camera may be included with the VTX, particularly with digital VTXs. 