FPV Quad Parts

Peripherals and Replacement Parts

Equipment

Equipment Peripherals

Build Page Parts

Build Parts Equipment

Pre-Built Quads and Kits 

Build Page Parts Overflow

Build Parts Equipment Overflow

Compatibility Categories

FPV Cycle

FPV Cycle Glide 5" Frame

You will always find the most up to date version of this frame here.  The latest updates make the frame significantly more durable without adding much weight. Good quality drivers or otherwise drivers that will not strip or deform such as those made by MIP are always STRONGLY encouraged.The Glide is manufactured with 2

FPVCycle Glide -  5

FPVCYCLE

The Glide Floss is built to work for you. While it comes in nicer carbon with pretty finishes, its focus is convenience and compatibility rather than aesthetics. The arms are also easy to swap so you can go back and forth. This design comes from the legacy of Hyperlite and Floss frames with optimizations over all freestyle frames in the series before it. If you’re running a Flowride or FlosStyle, we know you love them but overall this design is better balanced, easier to build and maintain, stronger and comes in better carbon.
Check out all our 5" Frame Kits and the rest of our FPVCycle Collection

Features

Fits 5.1” props
Premium materials
True X layout
One central 30x30/20x20 mounting platform flanked by two 20x20 platforms all accessible at all times with no interference.
No stack screws touch any arm parts. No arm/stack integration.
Two screws per independent arm with bracing against other arms. Easy swaps and secure fit.
23mm standoffs (fits vista with low cam tilt, 25mm recommended for DJI standard cam)
GoPro mount platform compatible with legacy FlossStyle and Flowride mounts.

12.9 hardness steel screws and steel press-nuts because ain't nobody got time for stripped aluminum. (switched back to black because it’s stronger)
Micro and Nano sized FPV camera spacing (20mm wide or narrower)
Motor mount pattern: 16x16 and 19x19

Frame weight fully built with FPV cam mount: 99g

 Includes

1x FPV Cycle Glide 5" Frame


The Glide Floss is built to work for you. While it comes in nicer carbon with pretty finishes, its focus is convenience and compatibility rather than aesthetics. The arms are also easy to swap so you can go back and forth. This design comes from the legacy of Hyperlite and Floss frames with optimizations over all frees

Frame Size

The frame is typically the first part to pick because it determines what kind of flying you’ll be doing the most. Start by picking a frame type, and narrow down the options by propeller size. The frame holds your quad parts together and heavily impacts what the quad can do. 

Frames

Frame Kit

Frame Stack Mount

FPV Camera Mount

Frame Type

FPV Cycle Sonicare 5" Frame Kit

Notes: - This frame only accepts 20x20 and 25.5x25.5 electronic mounting. A simple adapter for 30.5x30.5/30x30 will come soon. - Please look at the product pictures for assembly guidance. - Brain3D has GoPro mounts already designed for this frame. We will have them soon. - If you would like to design your own GoPro/cam

Sonicare (X4) 5

ImpulseRC

ImpulseRC Apex DC 5" Frame Kit

After years of anticipation, the new Apex frame from ImpulseRC is here! Designed in collaboration with Mr Steele, the ApexDC brings improvements to the classic 'dead cat' geometry for freestyle, videography, and mid-range exploring.

After years of anticipation, the new Apex from ImpulseRC is here! Designed in collaboration with Mr Steele, the ApexDC brings improvements to the classic 'dead cat' geometry for freestyle, videography, and mid-range exploring.
Read on for the full l

ImpulseRC ApexDC FPV Frame

ImpulseRC ApexDC FPV Frame - Light Weight Mr Steele Edition

After years of anticipation, the new Apex frame from ImpulseRC is here! Designed in collaboration with Mr Steele, the ApexDC brings improvements to the classic 'dead cat' geometry for freestyle, videography, and mid-range exploring.

Read on for the full list of evolutionary new features!
Features
Unique Arm Geometry
The typical 'dead cat' design moves the front arms outwards while moving the rear arms back and closer into the body. This has the benefit of clearing the camera view of props, however, there are major drawbacks for flight characteristics because the front and rear motors are no longer aligned.
The ApexDC is a variation on this classic 'dead cat' which keeps the front and rear motor aligned to maintain the much loved compressed-x geometry that ImpulseRC brought to the industry. This keeps the frame balanced and flight performance is no longer compromised. By modifying only the upper and lower main plates we retained full compatibility with regular Apex arms, using standard 5" arms at the front and standard 6" arms at the back.
There are no props in shots of DJI HD flight cameras and for slower cinematic flying it's now possible to run GoPro angles lower than ever before.
Custom GoPro Mounting
For quick angle changes, while filming, not many mounts can beat the standard GoPro tab and slot design. However, the stock GoPro bolt leaves a lot to be desired for FPV use.
Included with the Mr Steele version of the ApexDC is not only a 3D printed mount but also a new custom-designed bolt, specifically for FPV use. Our new bolt is machined from aluminum for substantial weight savings and has an 8mm hex on the outside, along with an internal 2.5mm hex broach. Make quick changes to your GoPro angle using either the standard hex driver for M3 bolts or the prop tool for M5 nuts, which you already have with you in your flight bag
Caddx Vista Isolation
A major drawback of the Caddx Vista system is that the body of the unit is grounded, this can cause the conductive carbon fiber plates and frame hardware to be grounded too. In an ideal world, this is not necessarily a problem, however, in the real world, it's an accident waiting to happen.
Alongside the required M2 mounting hardware for the Vista, we also include a die-cut mylar insulator and custom machined 'cone rivets' from non-conductive POM. When installed the Caddx Vista and also the M2 hardware is completely electrically isolated from the frame. This solution adds only 0.5g of extra weight compared to other designs using bulky and heavy 3D prints.
DJI HD Camera Isolation
Like the Caddx Vista itself, certain DJI HD cameras can also ground the frame, with similar unfortunate consequences.
Included with the ApexDC are newly redesigned HD camera plates and 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.
Antenna Mounting
Included in every kit is a 3D printed antenna mount for the Caddx Vista or other similar antennas.
In addition, the Mr Steele version of the kit also includes a standoff mount for the Tracer Immortal-T antenna.
Includes
ApexDC Kit Contents

Carbon fiber frame parts
Hardware and standoffs
Mylar and POM Vista isolation parts
Vista antenna mount
injection-molded skids and bumper
injection-molded wire covers
Rubber and velcro battery pads
Diamond files
Battery strap

Mr Steele Kit Extras
Includes everything in the base kit, along with the following extras:

GoPro mount and custom bolt
Tracer Immortal-T mount
7075-T6 lightweight hardware kit
Coyote Brown skids and bumper
Rubber FC vibration mounts
XT-60 pigtail
Foam strip
Battery strap



After years of anticipation, the new Apex frame from ImpulseRC is here! Designed in collaboration with Mr Steele, the ApexDC brings improvements to the classic 'dead cat' geometry for freestyle, videography, and mid-range exploring. Read on for the full list of evolutionary new features! Features Unique Arm Geometry Th

ImpulseRC Micro Apex 3" Frame

The ImpulseRC Micro Apex 3" Frame Kit takes everything you know and love from the widely popular full-sized Apex and shrinks it down (without compromise) to deliver, by far, the biggest little frame on the market. 

ImpulseRC Micro Apex 3" Frame Kit (w/ Additional Plastics)

ImpulseRC Micro Apex 3&quot Frame Kit (w/ Additional Plastics)

Impulse RC

The infamous ImpulseRC Apex frame has been shrunk down into a micro-size platform!
The micro Apex retains all the unique innovations of the original Apex such as zero arm slop/resonance, compressed X arm geometry, and an optimized center of gravity.
This frame is capable of sub 250g flight and can be outfitted as a micro long-range rig or a freestyle ripper!
Only includes carbon, hardware, and accessories specified below.
We also carry the Micro Apex 4&quot Frame!
Check out the ImpulseRC Micro Apex Frames and Accessories Collection and our full range of ImpulseRC Gear! 


Features

Full crash damage warranty on all parts for 1 year
Perfect for Caddx Vista, 4K Tarsier or classic analog setup
Dual stack, 20x20 M3 and M2 centre, 20x20 M2 rear

Fits M2 9x9mm motors and M2 12x12mm motors
Injection moulded arm skids and front bumper
Injection moulded fitted wire guards to protect from prop strikes
Two battery pads included, 2mm rubber and ultra-light hook pad
3&quot frame weight 58g, carbon fibre + hardware
4mm thick arms, single shoulder bolt per arm

2mm thick upper and lower main plates
1.5mm thick top and camera plates

Includes
Carbon


1x Micro Apex Arm Key CF 3.5mm
1x Micro Apex Top Plate CF 1.5mm
1x Micro Apex Main Lower CF 2mm
1x Micro Apex Main Upper CF 2mm
2x Micro Apex Cam Side Plate CF 1.5mm
4x Micro Apex 3&quot Arm CF 4mm

Accessories


1x Micro Apex Hook LIPO pad - BLACK
1x Micro Apex LIPO pad - 2mm BLACK
1x Diamond File - Flat (Mini)
1x Diamond File - Round (Mini)
1x Lipo Strap - Small - ImpulseRC
1x Micro Apex Plastics Kit - BLACK
1x Micro Apex Arm Covers - BLACK - (4 Pack)

Hardware

(4x) M3x11mm Shoulder bolt - High Tensile Carbon Steel - Gunmetal
(4x) 3x10mm Cone Washer - Aluminium - Black
(4x) M3 Press Nut - Stainless Steel
(1x) M3x6mm Cap - High Tensile Carbon Steel - Gunmetal
(12x) M2.5x8mm Button - High Tensile Carbon Steel - Gunmetal
(16x) M2x6mm Cap - Stainless Steel
(16x) M2x8mm Cap - Stainless Steel
(4x) M3x10mm Countersunk Screw - Stainless Steel
(4x) M3x16mm Countersunk Screw - Stainless Steel
(4x) M2x18mm Countersunk Screw - Stainless Steel
(4x) M2 Lock Nut - Stainless Steel
(4x) M3 Lock Nut - Stainless Steel




The infamous ImpulseRC Apex frame has been shrunk down into a micro-size platform! The micro Apex retains all the unique innovations of the original Apex such as zero arm slop/resonance, compressed X arm geometry, and an optimized center of gravity. This frame is capable of sub 250g flight and can be outfitted as a mic

ImpulseRC Micro Apex 3" Micro Frame Kit from WREKD Co.

ImpulseRC Micro Apex 3

ImpulseRC Micro Apex 3" Micro Frame Kit


THE IMPULSERC MICRO APEX TAKES EVERYTHING YOU KNOW AND LOVE FROM THE WILDLY POPULAR FULL-SIZE APEX, THEN SHRINKS IT DOWN WITHOUT COMPROMISE TO DELIVER BY FAR THE BIGGEST LITTLE FRAME ON THE MARKET.
The meticulous transformation and extreme attention to detail has created a frame which incorporates years of design experience.Equally comfortable as a sub-250g long range explorer, or a full-blooded freestyle machine capable of handling the harshest environments.
 

 
The Micro Apex incorporates all of the unique innovations pioneered by ImpulseRC and now widely imitated. From the compressed-X arm geometry, integrated camera tilt, front box-section and split main plate design, to our custom shoulder bolts and arm locking key. At the centre of mass where the arms meet there is a massive 8mm of carbon fibre, taking the stiffness of a micro frame to a new dimension so you can enjoy unsurpassed flight characteristics at this prop size.
You can expect zero arm slop or movement, zero vibration or resonance, and of course that proven ImpulseRC durability you can always trust. All backed up with our full crash damage warranty that covers all carbon fibre and metal parts for 1 year from the date of purchase.
 

Full crash damage warranty on all parts for 1 year
Perfect for Caddx Vista, 4K Tarsier or classic analog setup
No props in shot of flight camera with 3” arms
Dual stack, 20x20 M3 and M2 centre, 20x20 M2 rear
Injection moulded arm skids and front bumper
Injection moulded fitted wire guards to protect from prop strikes
Two battery pads included, 2mm rubber and ultra-light hook pad
Custom fitted Racewire available for 4” arms
3” frame weight 58g, carbon fibre + hardware
4” frame weight 61g, carbon fibre + hardware
4mm thick arms, single shoulder bolt per arm
2mm thick upper and lower main plates
1.5mm thick top and camera plates







  
 
CARBON


(1x) Micro Apex Arm Key CF 3.5mm
(1x) Micro Apex Top Plate CF 1.5mm
(1x) Micro Apex Main Lower CF 2mm
(1x) Micro Apex Main Upper CF 2mm
(2x) Micro Apex Cam Side Plate CF 1.5mm
(4x) Micro Apex 3" Arm CF 4mm

ACCESSORIES


(1x) Micro Apex Hook LIPO pad - BLACK
(1x) Micro Apex LIPO pad - 2mm BLACK
(1x) Diamond File - Flat (Mini)
(1x) Diamond File - Round (Mini)
(1x) Lipo Strap - Small - ImpulseRC
(1x) Micro Apex Plastics Kit - BLACK
(1x) Micro Apex Arm Covers - BLACK - (4 Pack)

HARDWARE


(4x) M2.5 26mm Standoff - Aluminium - Black
(2x) M2.5 20mm Standoff - Aluminium - Black
(4x) M3x11mm Shoulder bolt - High Tensile Carbon Steel - Gunmetal
(4x) 3x10mm Cone Washer - Aluminium - Black
(4x) M3 Press Nut - Stainless Steel
(1x) M3x6mm Cap - High Tensile Carbon Steel - Gunmetal
(12x) M2.5x8mm Button - High Tensile Carbon Steel - Gunmetal
(16x) M2x6mm Cap - Stainless Steel
(16x) M2x8mm Cap - Stainless Steel
(4x) M3x10mm Countersunk Screw - Stainless Steel
(4x) M3x16mm Countersunk Screw - Stainless Steel
(8x) M3x18mm Countersunk Screw - Stainless Steel
(8x) M2 Lock Nut - Stainless Steel
(4x) M3 Lock Nut - Stainless Steel
(4x) 1.8x1mm O-ring




THE IMPULSERC MICRO APEX TAKES EVERYTHING YOU KNOW AND LOVE FROM THE WILDLY POPULAR FULL-SIZE APEX, THEN SHRINKS IT DOWN WITHOUT COMPROMISE TO DELIVER BY FAR THE BIGGEST LITTLE FRAME ON THE MARKET. The meticulous transformation and extreme attention to detail has created a frame which incorporates years of design exper

ImpulseRC Micro Apex 3"

TBS Ethix Cinerat 3" Frame

Team BlackSheep

TBS Ethix Cinerat 3" Frame Kit (Carbon + Hardware)

TBS Ethix Cinerat 3&quot Frame Kit (Carbon + Hardware)

Introducing the all new 3" CineRat frame, designed to be compatible with 6s and the capability to fit a full 20x20 FC/ESC stack. Allowing enough room for GoPro mounts on both the front and rear of the frame, the CineRat is spacious for its size. The flexibility allows room for the pilot's creativity. The perfect frame 

TBS Ethix CineRat (Carbon & Hardware Parts)

Ethix


Introducing our next product in the flat rat line up is our 3” cine frame. When we looked into what we wanted in a small compact cine frame the main thing that stood out was we didn’t want ducts. So we set out to design a 6s motor (flat rat motors) to complement this frame so that it could haul a full size camera with enough thrust for a 3” props and allow us the add on of just prop guards for safety. With a 3” frame based around 6s we also wanted the ability to carry a full size fc/esc stack with the option of a 20x20 if that’s your thing. There’s the option for GoPro mounts on the front and back as well as a 10deg couch. We added front fpv camera protection  (19x19 size) for those that want to utilize the split cam mounts on the front of the frame and on the bottom of the protection is a slot for mounting your immortal T antenna. We really hope you enjoy using this frame to get creative as much as we do! 
-Eric
INCLUDES

1 x Top Plate
1 x Bottom Plate
1 x Battery Pad
4 x motor plates
7 x Standoffs 
1 x Screws Set
1 x Front Arm
1 x Rear Arm

3D FILES

Download from Thingiverse

 
Full kit and/or 3D prints take 2-3 extra days to ship.

Introducing our next product in the flat rat line up is our 3” cine frame. When we looked into what we wanted in a small compact cine frame the main thing that stood out was we didn’t want ducts. So we set out to design a 6s motor (flat rat motors) to complement this frame so that it could haul a full size camera with 

Ethix CineRat

Lumenier

Lumenier QAV-S 2 Joshua Bardwell SE 5” Frame Kit

Introducing the Lumenier QAV-S 2 5" Freestyle Quadcopter Frame - Joshua Bardwell Special Edition, a custom-designed drone frame for FPV Freestyle flying! This Lumenier frame was designed in collaboration with world-renown FPV guru Joshua Bardwell to bring you the "perfect" FPV freestyle frame. Building upon the success

Quadifier

Quadifier Diamondback HD O3 5" Freestyle Frame Kit

The Quadifier Diamond back DJI O3 is a 5 inch freestyle frame that is designed to be nimble, agile, efficient, and fit a DJI O3 system. I have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.
Be sure to check out all our 5&quot frames, and all our Quadifier products! 
Features

Designed for 20x20 and 30x30 stacks
Has 20x20 mounting in the back for any HD VTX of your liking
Comes with all mounts required to mount the O3 system

Squish X for smaller size and better gopro shots
5mm arms


Fits micro 19x19 size cameras and the DJI O3 Camera


Specification


Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Main Plate Thickness: 2mm
Frame Shape: True X
Motor to Motor: 230mm
Arm Thickness: 5mm
Frame Weight With TPU: 115g


Includes

1x Quadifier Diamondback HD O3 5&quot Freestyle Frame Kit - Choose Your Color
1x TPU O3 Kit


The Quadifier Diamond back DJI O3 is a 5 inch freestyle frame that is designed to be nimble, agile, efficient, and fit a DJI O3 system. I have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose bet

Quadifier Diamondback HD (Rev2) O3 5" Freestyle Frame Kit - Choose Your Color from WREKD Co.

Quadifier Diamondback HD (Rev2) O3 5

Quadifier Diamondback HD (Rev2) O3 5" Freestyle Frame Kit - Choose Your Color

The Quadifier Diamond back DJI O3 is a 5 inch freestyle frame that is designed to be nimble, agile, efficient, and fit a DJI O3 system. I have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.
Be sure to check out all our 5" frames, and all our Quadifier products! 
Features

Designed for 20x20 and 30x30 stacks
Has 20x20 mounting in the back for any HD VTX of your liking
Comes with all mounts required to mount the O3 system

Squish X for smaller size and better gopro shots
5mm arms


Fits micro 19x19 size cameras and the DJI O3 Camera


Specification


Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Main Plate Thickness: 2mm
Frame Shape: True X
Motor to Motor: 230mm
Arm Thickness: 5mm
Frame Weight With TPU: 115g


Includes

1x Quadifier Diamondback HD O3 5" Freestyle Frame Kit - Choose Your Color
1x TPU O3 Kit


Quadifier Diamondback HD (Rev2) O3 5" Freestyle Frame Kit - Choose You

The Quadifier Diamond back DJI O3 is a 5 inch freestyle frame that is designed to be nimble, agile, efficient, and fit a DJI O3 system. I have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Check out 

Quadifier Diamondback HD DJI O3 5

Quadifier Diamondback 5" Freestyle Frame Kit

The Quadifier Diamond back is a 5 inch freestyle frame that is designed to be nimble, agile, and efficient. I (Quadifier) have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or red for your TPU color on your quad.Be sure to check out all our 5" frames, and all our Quadifier products! 
Features

Designed for 20x20 and 30x30 stacks

Has 20x20 mounting in the back for any HD VTX of your liking.

Squish X for smaller size and better GoPro shots

5mm arms

Fits micro 19x19 size cameras


Specification


Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 230mm
Arm Thickness: 5mm
Frame Weight With TPU: 113g


Includes

1x Quadifier Diamondback 5" Freestyle Frame Kit 
1x TPU Kit


The Quadifier Diamond back is a 5 inch freestyle frame that is designed to be nimble, agile, and efficient. I (Quadifier) have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or re

Quadifier Diamondback 5" Freestyle Frame Kit - Choose Your Color

The Quadifier Diamond back is a 5 inch freestyle frame that is designed to be nimble, agile, and efficient. I (Quadifier) have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or red for your TPU color on your quad.Be sure to check out all our 5&quot frames, and all our Quadifier products! 
Features

Designed for 20x20 and 30x30 stacks

Has 20x20 mounting in the back for any HD VTX of your liking.

Squish X for smaller size and better GoPro shots

5mm arms

Fits micro 19x19 size cameras


Specification


Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 230mm
Arm Thickness: 5mm
Frame Weight With TPU: 113g


Includes

1x Quadifier Diamondback 5&quot Freestyle Frame Kit 
1x TPU Kit


Quadifier Diamondback 5" Freestyle Frame Kit - Choose Your Color from WREKD Co.

Quadifier Diamondback 5

Experience freestyle flying like never before with the Quadifier Diamondback, a 5-inch freestyle frame that blends speed, agility, and strength in a sleek and stylish package. Machined from high-quality carbon fiber, the Diamondback is lightweight, durable, and designed to maximize stability for unparalleled performanc

Quadifier Baby Diamondback 3.5" Micro Freestyle Frame Kit

The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or red for your TPU color on your quad.
Be sure to check out all our 3.5" frames, and all our Quadifier products! 
Features

Designed for 20x20 stack

3mm arms

Fits micro 19x19 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 160mm
Arm Thickness: 4mm
Frame Weight With TPU: 65g


Includes

1x Quadifier Baby Diamondback 3.5" Freestyle Frame Kit
1x TPU Kit


The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or red

Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm Arms - Choose Your Color

Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm

The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.  Choose between blue or red for your TPU color on your quad.
Be sure to check out all our 3.5&quot frames, and all our Quadifier products! 
Features

Designed for 20x20 stack

3mm arms

Fits micro 19x19 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 160mm
Arm Thickness: 4mm
Frame Weight With TPU: 65g


Includes

1x Quadifier Baby Diamondback 3.5&quot Freestyle Frame Kit
1x TPU Kit


Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm Arms - Choose Your Color from WREKD Co.

Quadifier Baby Diamondback Freestyle 3.5

The Quadifier Baby Diamond back is a 3 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Check out all our 3" Frames 

Quadifier Baby Diamondback 3

The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.
Be sure to check out all our micro frames, and all our Quadifier products! 
Features

Designed for 20x20 stack

3mm arms

Fits micro 19x19 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 160mm
Arm Thickness: 4mm
Frame Weight With TPU: 65g


Includes

1x Quadifier Baby Diamondback 3.5" Freestyle Frame Kit
1x TPU Kit


The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Be sure to check out all ou

Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm Arms

The Quadifier Baby Diamond back is a 3.5 inch freestyle frame that is designed to be nimble, agile, and efficient. I have always been a picky person when deciding on a frame. The Baby DiamondBack is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop.
Be sure to check out all our micro frames, and all our Quadifier products! 
Features

Designed for 20x20 stack

3mm arms

Fits micro 19x19 size cameras

Specification


Stack Mounting: 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 9x9 M2 ,12x12 M2
Main Plate Thickness: 2mm
Frame Shape: Squished X
Motor to Motor: 160mm
Arm Thickness: 4mm
Frame Weight With TPU: 65g


Includes

1x Quadifier Baby Diamondback 3.5&quot Freestyle Frame Kit
1x TPU Kit


Quadifier Baby Diamondback Freestyle 3.5" Micro Frame Kit (Rev2) - 4mm Arms from WREKD Co.

GEPRC

GEPRC GEP-MK5 Mark5 Pro 5" Frame

The GEPRC MARK5 Pro Frame Kit is developed specifically for freestyle with squashed X arm design. 

The GEPRC MARK5 Pro Frame Kit is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum al

GEPRC Mark5 GEP-MK5 5" Freestyle Frame Kit - Black Pro Version 

GEPRC Mark5 GEP-MK5 5&quot Freestyle Frame Kit - Black Pro Version 

New Generation freestyle MARK5 frame. The MARK5 Frame is now officially released in three versions,which are standard version, pro version and pro upgrade kits version.The frame is compatible with DJI AIR UNIT, CADDX VISTA and Analog VTX. MARK5 frame is developed specifically for freestyle with squashed X arm design. U

GEPRC GEP-MK5 Pro 5

The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more endurance.
Gopro case available separately.
Check out all out DJI compatible frames, electronics and accessories as well as our whole GEPRC product line!
Features

Aluminum alloy side plates not only look stunning, but reduce weight and add more endurance.
Developed specifically for freestyle with squashed X arm design
The installation hole of VTX is compatible with DJI Air Unit and VISTA, while maintaining the 30.5*30.5 analog VTX installation hole
Unique shock absorbing structure design, less vibrations and resonance
Specially designed independent capacitor and buzzer compartment for better performance and shaking reduction

Specifications

Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm: 5.0mm
FC mounting holes: 30.5mm x 30.5mm
VTX mounting holes: 30.5mm x 30.5mm / 20mm x 20mm
Motor mounting holes: 16mm x 16mm / 19mm x 19mm
Camera installation space: 19-20mm
Suitable propeller size: 5″ propeller
Dimension: 214mm x 168mm x 42mm
Weight: 130.0g

Includes

1 x GepRC Mk5 Pro 5&quot Frame
1 x Battery strap M15x250mm
2 x Battery strap M20x220mm
2 x Battery Silicone Pads
1 x Set of 3D printings
2 x Action camera mount holder
1 x Set of screws
1 x Set of screwdrivers
1 x Antenna fixed tube


The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more enduranc

GEPRC Mark5 Pro 5" Frame - Choose Version from WREKD Co.

GEPRC Mark5 Pro 5

GEPRC Mark5 Pro 5" Frame - Choose Version

The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more endurance.
Gopro case available separately.
Check out all out DJI compatible frames, electronics and accessories as well as our whole GEPRC product line!
Features

Aluminum alloy side plates not only look stunning, but reduce weight and add more endurance.
Developed specifically for freestyle with squashed X arm design
The installation hole of VTX is compatible with DJI Air Unit and VISTA, while maintaining the 30.5*30.5 analog VTX installation hole
Unique shock absorbing structure design, less vibrations and resonance
Specially designed independent capacitor and buzzer compartment for better performance and shaking reduction

Specifications

Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm: 5.0mm
FC mounting holes: 30.5mm x 30.5mm
VTX mounting holes: 30.5mm x 30.5mm / 20mm x 20mm
Motor mounting holes: 16mm x 16mm / 19mm x 19mm
Camera installation space: 19-20mm
Suitable propeller size: 5″ propeller
Dimension: 214mm x 168mm x 42mm
Weight: 130.0g

Includes

1 x GepRC Mk5 Pro 5" Frame
1 x Battery strap M15x250mm
2 x Battery strap M20x220mm
2 x Battery Silicone Pads
1 x Set of 3D printings
2 x Action camera mount holder
1 x Set of screws
1 x Set of screwdrivers
1 x Antenna fixed tube


HGLRC

HGLRC Sector D5 5" Freestyle Frame Kit











The HGLRC Sector D5 FR 5&quot Freestyle FPV Frame uses a DeadCat configuration. It has quick swap arms, CNC aluminum side plates, dustproof belts, an integrated XT60 port, dust-proof straps, and optimized body parts for DJI O3 VTX. Its fixed lens ensures enhanced stability and reduced video jelly. Fly with style and durability!










Check out all our 5&quot frames and other DJI O3 Compatible Quads also our whole HGLRC product line!
Need Spare parts for your Sector Frame? Check out our spare parts list for all your needs.

Features

Replaceable arms for quick disassembly without taking apart the whole frame.

A fixed power outlet for convenience and protecting your power cable from cutting by propellers.

Dust-proof straps covering both sides to better protect your rig and keep them clean.

CNC aluminum side plates combined with 3D printed parts to make your drone look dope!

The Sector D5 optimized body aluminum parts for DJI O3 VTX. The lens is fixed by the print to effectively reduce low-frequency vibration, enhance shooting stability and reduce in-flight video jelly.


Specifications

Brand name: HGLRC
Model: Sector D5 FR Freestyle Frame
Material: 3K Carbon Fiber
Type: 5-inch
Wheelbase: 225 mm
Size: 230x184 mm
Top plate: 2.5mm
Middle plate: 2mm
Bottom plate: 2.5mm
Top and middle plate space: 25mm
FC mounting hole: 30.5mmx30.5mm/20x20mm M3
VTX Mounting: 20x20
Camera mount: 19x19mm &ampamp 20x20mm
Motor mounting hole: M3X16
Weight: 121.7g

Includes

1x HGLRC Sector D5 5&quot Freestyle Frame Kit
1 x 2.5 mm Top plate

1x 2 mm Mid plate


1x 2.5 mm Base plate


2x 5 mm Front arm


2x 5 mm Rear arm


1x 2.5mm Arm limit plate


2x 2mm Camera side panel


1x Frame head CNC aluminum parts (one pair)


1x TPU Black GOPRO holder mount


1X TPU black Cam Conversion board (one pair)


1x TPU black SMA antenna mount


1x TPU black GPS mount


1x TPU black bottom mount


4x TPU black arm protection


4x TPU Red footpad

2x Battery straps 20x250mm

1x Battery Anti-slip pad

1x Screw Accessory package


The HGLRC Sector D5 FR 5" Freestyle FPV Frame uses a DeadCat configuration. It has quick swap arms, CNC aluminum side plates, dustproof belts, an integrated XT60 port, dust-proof straps, and optimized body parts for DJI O3 VTX. Its fixed lens ensures enhanced stability and reduced video jelly. Fly with style and durabi

HGLRC Sector D5 O3 5" Freestyle Frame Kit from WREKD Co.

HGLRC Sector D5 O3 5

HGLRC Sector D5 O3 5" Freestyle Frame Kit

Features: Replaceable arms for quick disassembly without taking apart the whole frame A fixed power outlet for convenience and protecting your power cable from cutting by propellers Dust-proof straps covering both sides to better protect your rig and keep them clean CNC aluminum side plates combined with 3D printed par

HGLRC Sector D5 5

HGLRC Sector X5 FR 5" Freestyle Wide X Frame Kit

﻿The CNC camera plates on this frame are designed to support the DJI O3 Air unit. Making this Frame an HD and Analog compatible frame. 
The HGLRC Sector X5 FR is a 5&quot Freestyle FPV Frame with a Wide X configuration. Take your freestyle flights to the next level with this durable frame! This frame features quick swap arms for easy electronic fixes and CNC aluminum side plates. It also has Dustproof belts that mount on the side standoffs to protect electronics from any debris.
Check out all our 5&quot frames, as well as our whole HGLRC product line!
Need Spare parts for your Sector Frame? Check out our spare parts list for all your needs.

Features

Replaceable arms for quick disassembly without taking apart the whole frame
A fixed power outlet for convenience and protecting your power cable from cutting by propellers
Dust-proof straps covering both sides to better protect your rig and keep them clean
CNC aluminum side plates combined with 3D printed parts to make your drone look dope!


Specifications

Brand name:HGLRC
Model: Sector X5 Freestyle Frame
Material: 3K Carbon Fiber
Type: 5-inch
Wheelbase: 210 mm
Size: 199x178 mm
Top plate: 2.5mm
Middle plate: 2mm
Bottom plate: 2.5mm
Top and middle plate space: 25mm
FC mounting hole: 30.5mmx30.5mm/20x20mm M3
VTX Mounting: 20x20
Camera mount:19x19mm
Motor mounting hole: M3X16
Weight: 120g

Includes

1x 2.5 mm Top plate
1x 2 mm Middle plate
1x 2.5 mm Base plate
4x 5 mm Arm
1x 2.5mm Arm fixing plate
2x 2mm Camera side panel
1x Frame head CNC aluminum parts (one pair)
1x TPU Black GOPRO fix mount
1x TPU black SMA antenna mount
1x TPU black GPS mount
1x TPU black base plate protection cover
4x TPU black arm protection
4x TPU Red footpad
2x Battery straps 20x250mm
1x Battery Anti-slip pad
1x Screw Accessory package


﻿The CNC camera plates on this frame are designed to support the DJI O3 Air unit. Making this Frame an HD and Analog compatible frame.  The HGLRC Sector X5 FR is a 5" Freestyle FPV Frame with a Wide X configuration. Take your freestyle flights to the next level with this durable frame! This frame features quick swap ar

HGLRC Sector X5 FR 5" Freestyle Frame Kit from WREKD Co.

HGLRC Sector X5 FR 5

HGLRC Sector X5 FR 5" Freestyle Frame Kit

HGLRC Sector X5 5

The HGLRC Sector X5 FR is a 5" Freestyle FPV Frame with Wide X configuration. Take your freestyle flights to the next level with this durable frame! This frame features quick swap arms for easy electronic fixes and CNC aluminum side plates.

HGLRC Sector X5 FR 5" Freestyle FPV Frame Kit - Wide X

HGLRC Sector X5 FR 5&quot Freestyle FPV Frame Kit - Wide X

TBS Source One V5 5" Frame

Team Black Sheep

The best quality First Person View equipment. Free or discounted shipping on all orders.Drone Racing, RC Airplanes, FPV Cameras, FPV Goggles, Video Transmitters, RC Quads, Drone Antennas, Lipo Batteries, and Ground Station Equipment.All available for amateurs, schools, hobbyists, government, and wholesale buyers.

TBS Source One V5 5 Inch Kit - RMRC

TBS Source One V5 5 Inch Kit

WREKD Co.

The TBS SourceOne V5 5" Freestyle Frame is a pre-fitted, X-configured frame, ready to fit a full-sized air unit. Its wide stance and durability makes it popular for freestyle and long range acrobatic flying, while its optimized light-weight construction ensures it can withstand heavy crashes. Press nuts come already installed, making it a reliable, everyday workhorse for casual FPV flying and competitive freestyle. Learn more about the SourceOne project from TBS.
As a bonus, add some 7" arms to this frame and you can use it in Street League Racing.

 About the Project
The SOURCE ONE project is a first-of-its-kind collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame in order to allow them to compete in an increasingly predatory marketplace.
The hope is for this frame to enable broad access to FPV thanks to a low price point, great documentation, and wide availability of compatible parts and accessories, without violating other people’s intellectual property.
Get Involved!

3D Printed Parts (STL) https://github.com/tbs-trappy/source_one/tree/master/3D%20Print%20Accessories

3D Printed files on Thingiverse: https://www.thingiverse.com/tag:sourceone 
Build Guide: https://oscarliang.com/how-to-build-fpv-drone/

Project discussion: https://discordapp.com/invite/ZJGkHwF

Project files: https://github.com/tbs-trappy/source_one 

Specifications

Wheelbase: 226mm
Top Plate: 2mm
Bottom Plate: 2.5mm
Middle Plate: 2mm
Arms Spacer: 6mm
Standoff Height: 30mm and 22mm
Camera plate: 2mm

Arm Thickness: 6mm
Stack Mounting: 30.5m30.5mm, 20x20mm and DJI Air Unit
Weight: 123.5g

Includes

1x TBS Source One V5 5" Freestyle Frame Kit


The TBS SourceOne V5 5" Freestyle Frame is a pre-fitted, X-configured frame, ready to fit a full-sized air unit. Its wide stance and durability makes it popular for freestyle and long range acrobatic flying, while its optimized light-weight construction ensures it can withstand heavy crashes. Press nuts come already in

TBS Source One V5 5" Freestyle/Long Range Frame

The SOURCE ONE is a wide-stance X configuration frame, popular for freestyle or free-range acrobatic flying. It is built to withstand harsh crashes and abuse. It fits and protects all the classic FPV components and is optimized for light weight. The SOURCE ONE is a perfect everyday workhorse for casual FPV flying and c

TBS SOURCE ONE V5 5INCH

The SOURCE ONE project is a first of its kind collaborative FPV frame project initiated by Team BlackSheep. 

#html-body [data-pb-style=E04UO11]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=AOL00IM]{display:no

TBS Source One V5 5" Frame Kit

TBS Source One V5 5&quot Frame Kit

The TBS SourceOne V5 5&quot Freestyle Frame is a pre-fitted, X-configured frame, ready to fit a full-sized air unit. Its wide stance and durability makes it popular for freestyle and long range acrobatic flying, while its optimized light-weight construction ensures it can withstand heavy crashes. Press nuts come already installed, making it a reliable, everyday workhorse for casual FPV flying and competitive freestyle. Learn more about the SourceOne project from TBS.

 About the Project
The SOURCE ONE project is a first-of-its-kind collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame in order to allow them to compete in an increasingly predatory marketplace.
The hope is for this frame to enable broad access to FPV thanks to a low price point, great documentation, and wide availability of compatible parts and accessories, without violating other people’s intellectual property.
Get Involved!

3D Printed Parts (STL) https://github.com/tbs-trappy/source_one/tree/master/3D%20Print%20Accessories

3D Printed files on Thingiverse: https://www.thingiverse.com/tag:sourceone 
Build Guide: https://oscarliang.com/how-to-build-fpv-drone/

Project discussion: https://discordapp.com/invite/ZJGkHwF

Project files: https://github.com/tbs-trappy/source_one 

Specifications

Wheelbase: 226mm
Top Plate: 2mm
Bottom Plate: 2.5mm
Middle Plate: 2mm
Arms Spacer: 6mm
Standoff Height: 30mm and 22mm
Camera plate: 2mm

Arm Thickness: 6mm
Stack Mounting: 30.5m30.5mm, 20x20mm and DJI Air Unit
Weight: 123.5g

Includes

1x TBS Source One V5 5&quot Freestyle Frame Kit


The ultimate freestyle frame for exhilarating acrobatic flying, with a durable build that takes on heavy crashes. The TBS Source One V5 5" Frame.

TBS Source One V5 5" Freestyle/Long Range Frame from WREKD Co.

TBS Source One V5 5

TBS PachRay 3" Frame Kit

The PachRay isn’t just another 3 inch frame, its a system of carefully chosen and tested components that work together seamlessly to provide FPV pilots with the absolute best flying experience possible. From hard core freestyle to relaxed medium range cinematic cruising, the PachRay delivers the performance that FPV pi

PachRay Frame Kit 3 Inch

Foxeer

Foxeer Aura 6" Freestyle Frame

Single replacement front arm for the Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 6" DJI Frame Replacement Front Arm (1 Pc.)

Foxeer Aura 6

Single replacement rear arm for the Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 6" DJI Frame Replacement Rear Arm (1 Pc.)

PIRAT

PIRAT Sloop V3 5" Frame

Replacement Camera Plates for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 2 x Pirat Sloop V3 5" Drone Frame Replacement Camera Plate

PIRAT Sloop V3 5

Replacement Cross Plate for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x Pirat Sloop V3 5" Drone Frame Replacement Cross Plate

Replacement Center Plate for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x Pirat Sloop V3 5" Drone Frame Replacement Center Plate

Replacement Bottom Plate for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x Pirat Sloop V3 5" Drone Frame Replacement Bottom Plate

Replacement Top Plate for the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x Pirat Sloop V3 5" Drone Frame Replacement Top Plate

Check out the Sloop V3 5" Freestyle Frame Kit, from PIRAT.  This brand is more of the upper echelon for quality and premium frames out there. 
Crafted with high-quality carbon fiber and aluminum parts, the Sloop is a tough frame that focuses on excellent CG balance to give smooth, super-tunable flight.


Developed in collaboration with FPV Pilot J-True, here comes the third version of the Pirat Sloop frame! Developed to be "smooth as hell" and capable of cinematic or juicy freestyle flight. The frame features our special cross plate mounting system which increases stiffness, reduces frame resonance, and prevents breaks. It features 20x20mm mounting holes in the rear for mounting of a Caddx Vista air unit or an analog video system.


Be sure to check out all our 5" frames, and all our PIRAT Products.


Features

30x30 stack
Mini camera size (predator mini like / 22mm width)
Chamfered Full 3K T300 carbon
7075 T6 aluminum custom standoff
Full T10 Torx 12.9 steel screw set.
5mm arms, 2.5mm bottom &amp top plate
27mm height for your stack.

Specification


Stack Mounting: 30x30
Carbon Material: Chamfered Full 3K T300 
Camera Size Compatibility: 22 or 20mm
Bottom/top Plate thickness: 2.5mm 
Maximum Stack Height: 21mm 
Arm Size: 5"
Arm thickness: 5mm

Motor Bolt Pattern: 16x16mm/19x19mm

Manual

Pirat Sloop V3 Manual


Includes

1x PIRAT Sloop V3 5" Freestyle Frame Kit
4x 5mm Arm 5"

1x 2.5mm Bottom plate
1x 2.5mm Top plate
2x 1.5mm Camera plate
1x 2mm Cross plate
1x 3D Printed VTX Antenna Mount
8x 6061 Aluminum Custom washers
4x 28mm Custom standoffs in 7075 aluminum
4x 21mm Custom standoffs in 7075 aluminum
4x Custom design 5mm standoffs in 7075 aluminum
8x Black Hex Press nuts
8x 8mm M3 Torx T10 12.9 steel countersunk screws
8x 12mm M3 Torx T10 12.9 steel countersunk screws
4x 10mm M3 Torx T10 12.9 steel gold colored mushroom head screws
4x 15mm M3 Torx T10 12.9 steel countersunk head screws
2x 20mm / 220mm lipo strap
1x Silicone grommet for battery cable
1x Silicone lipo pad
4x Foam landing pad
1x Torx T10 key


Check out the Sloop V3 5" Freestyle Frame Kit, from PIRAT.  This brand is more of the upper echelon for quality and premium frames out there.  Crafted with high-quality carbon fiber and aluminum parts, the Sloop is a tough frame that focuses on excellent CG balance to give smooth, super-tunable flight. Developed in col

PIRAT Sloop V3 5" Freestyle Frame Kit

Mounting kit for installing the Caddx Vista in the Pirat Sloop V3 5" drone frame. Check out our 5" Frames and the rest of our Pirat Frames Collection! Includes 1 x PIRAT Sloop V3 5" FPV Drone Caddx Vista Mounting Kit

Developed in collaboration with FPV Pilot J-True, here comes the third version of the Pirat Sloop frame! Developed to be "smooth as hell" and capable of cinematic or juicy freestyle flight. The frame features our special cross plate mounting system which increases stiffness, reduces frame resonance, and prevents breaks

Check out the Sloop V3 5&quot Freestyle Frame Kit, from PIRAT.  This brand is more of the upper echelon for quality and premium frames out there. 
Crafted with high-quality carbon fiber and aluminum parts, the Sloop is a tough frame that focuses on excellent CG balance to give smooth, super-tunable flight.


Developed in collaboration with FPV Pilot J-True, here comes the third version of the Pirat Sloop frame! Developed to be &quotsmooth as hell&quot and capable of cinematic or juicy freestyle flight. The frame features our special cross plate mounting system which increases stiffness, reduces frame resonance, and prevents breaks. It features 20x20mm mounting holes in the rear for mounting of a Caddx Vista air unit or an analog video system.


Be sure to check out all our 5&quot frames, and all our PIRAT Products.


Features

30x30 stack
Mini camera size (predator mini like / 22mm width)
Chamfered Full 3K T300 carbon
7075 T6 aluminum custom standoff
Full T10 Torx 12.9 steel screw set.
5mm arms, 2.5mm bottom &ampamp top plate
27mm height for your stack.

Specification


Stack Mounting: 30x30
Carbon Material: Chamfered Full 3K T300 
Camera Size Compatibility: 22 or 20mm
Bottom/top Plate thickness: 2.5mm 
Maximum Stack Height: 21mm 
Arm Size: 5&quot
Arm thickness: 5mm

Motor Bolt Pattern: 16x16mm/19x19mm

Manual

Pirat Sloop V3 Manual


Includes

1x PIRAT Sloop V3 5&quot Freestyle Frame Kit
4x 5mm Arm 5&quot

1x 2.5mm Bottom plate
1x 2.5mm Top plate
2x 1.5mm Camera plate
1x 2mm Cross plate
1x 3D Printed VTX Antenna Mount
8x 6061 Aluminum Custom washers
4x 28mm Custom standoffs in 7075 aluminum
4x 21mm Custom standoffs in 7075 aluminum
4x Custom design 5mm standoffs in 7075 aluminum
8x Black Hex Press nuts
8x 8mm M3 Torx T10 12.9 steel countersunk screws
8x 12mm M3 Torx T10 12.9 steel countersunk screws
4x 10mm M3 Torx T10 12.9 steel gold colored mushroom head screws
4x 15mm M3 Torx T10 12.9 steel countersunk head screws
2x 20mm / 220mm lipo strap
1x Silicone grommet for battery cable
1x Silicone lipo pad
4x Foam landing pad
1x Torx T10 key


PIRAT Sloop V3 5" Freestyle Frame Kit from WREKD Co.

Foxeer Aura 5" Freestyle Frame

Single replacement rear arm for the Foxeer Aura 5" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" DJI Frame Replacement Rear Arm (1 Pc.)

Foxeer Aura 5

Replacement middle plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Middle Plate

Replacement bottom plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Bottom Plate

Single replacement front arm for the Foxeer Aura 5" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" DJI Frame Replacement Front Arm (1 Pc.)

Single replacement top plate for the Foxeer Aura 5" DJI Frame and Foxeer Aura 6" DJI Frame. Check out our Foxeer Aura Frame and Parts Collection and the rest of our Foxeer Products! Package Includes: 1 x  Foxeer Aura 5" &amp; 6" DJI Frame Replacement Top Plate

The new Aura 5" Freestyle &amp; Long Range Frame from Foxeer is a great choice for both freestyle or long Range builds. Available in both teal and black. It features deadcat arm geometry, can fit both the DJI full size Air Unit or Vista VTX's and uses high performance T700 carbon for increased stiffness and vibration r

The Foxeer Aura Lightweight Long Range frame focuses on long flights and smooth flying. Each frame only weighs just over 70g and is perfect for both freestyle and long-range flying.

The Foxeer Aura Lightweight Long Range frame focuses on long flights and smooth flying. Each frame only weighs just over 70g and is perfect for both freestyle and long-range flying.
The carbon fiber is interwoven with color to give a striking effect

Foxeer Aura Lightweight LR Freestyle Frame Kit

Diatone

Diatone Roma F35 3.5" Frame

The F35 is Diatone's latest 3.5" frame that can be used for both Analog or HD/Vista builds! Check out our Diatone Roma F35 Collection, and the rest of our Diatone Products! Specifications Wheelbase：158mm Weight: 70g Prop Size: 3.5inch FC Mounting:20×20（M2/M3）/30.5×30.5mm（M3） Motor Mounting:12mm（M2）/16mm(M3) Camera Spac

DIATONE ROMA F35 3.5INCH Frame Kit

DiatoneUSA

The Roma F35 is a Roma F series 3.5&quot with a compact design and integrated base plate, which not only increases the stability of flights but also greatly increases the installation space of the electronic equipment for the frame. The head of the frame is made of 7075 magnesium-aluminum alloy, which supports a maximum lens width of 20mm, and is equipped with 3D printed parts for 20mm/19mm cameras. The installation hole position of the equipment tower is M3 (20x20) equipped with M3 to M2 CNC aluminum parts. There are two sets of M3 (30.x30.5mm) to meet the installation requirements of various stacks. Side injection protection parts, while improving the appearance, are more suitable for beginners to protect internal electronics. Optional accessories for the full-size DJI FPV have also been developed to meet requirements for high-definition picture quality.
The Diatone Roma F35 Freestyle Frame is a 3.5&quot Quadcopter frame that is great for freestyle ripping!
Note: Injection Molded Protective Casing Color May Vary. Electronics are not Included.
Check out all our 2-3&quot Frames, and all our Diatone gear!

Features

Carbon Fiber Frame Kit with Hardware
Alloy Aluminum Camera Side Plates
Injection-molded protection parts
Stack Mounting Adapter


Specifications
Diatone Roma F35 3.5&quot Frame

FC Mounting:20×20 (M2/M3)/30.5×30.5mm (M3）
Rated Voltage (Recommendation): 4S~6S
Motor Mounting:12mm (M2) /16mm(M3)
Camera Spacing:19/20mm
Max Stack Height: 25mm
Bai Aluminum alloy: 7075
Carbon fiber: T300 3K
Wheelbase: 158mm
Bottom Plate: 3mm
Prop Siza: 3.5inch
Top Plate: 2mm
Weight: 70g
Arm: 3mm

Includes

1x M2/M3 Stack Mounting Adapter
1x 2.4G Antenna Protector
1x 19mm Camera Mount
1x 20mm Camera Mount
1x SMA Antenna Mount
2x Receiver Connector
1x 20mm PC Spacer
1x Accessories Pack
4x Motor Wire Cover
1x T Antenna Mount
2x Side Protector
1x Hardware Set
1x Standoffs Set
1x Bottom Plate
1x Battery Pad
2x Lipo Strap
1x Top Plate

Recommended (Not Included)

Stack: Diatone Mamba MK4 F722 APP F55_128k 3-6S 30x30 Stack/Combo (F722 FC / 55A 128k 32bit 4in1 ESC)

Propellers: Gemfan Hurricane 3520 Durable Tri-Blade 3.5&quot Prop 4 Pack

Motors: Diatone Mamba Toka 2203.5 4200Kv Motor

4S Battery: 3 Pack of RDQ Series 14.8V 4S 850mAh 75C LiPo Micro Battery - XT30 or XT60

FC: Diatone Mamba MK4 F405 Mini 20x20 Flight Controller



The Roma F35 is a Roma F series 3.5" with a compact design and integrated base plate, which not only increases the stability of flights but also greatly increases the installation space of the electronic equipment for the frame. The head of the frame is made of 7075 magnesium-aluminum alloy, which supports a maximum le

Diatone Roma F35 Freestyle 3.5" Micro Frame Kit from WREKD Co.

Diatone Roma F35 Freestyle 3.5

Diatone Roma F35 Freestyle 3.5" Micro Frame Kit

The Diatone Roma F35 Freestyle Frame is a 3.5" Quadcopter frame that is great for freestyle ripping!

The Diatone Roma F35 Freestyle Frame is a 3.5

Diatone Roma F35 3.5" Freestyle Quadcopter Frame Kit

Diatone Roma F35 3.5&quot Freestyle Quadcopter Frame Kit

Camera Butter

Camera Butter Cinema ONE 7" Frame

Camera Butter Cinema ONE Frame with 7/8" Arms! Check out all our Frames and the rest of our Camera Butter Products! You've never seen a frame like this - Designed to be stable, cinematic and easy to tune, this frame can do it all.  Maybe you want a 7 inch long-range efficiency monster?  Use the 7 inch arms in quasi-X c

Camera Butter Cinema ONE Frame with 7/8

Camera Butter Cinema ONE 5" Frame

The Camera Butter Cinema ONE 5" Frame is designed to be a stable, cinematic, and easy to tune frame. You can use the 5" arms in an X configuration, as well as flip the arms over to get a 5" deadcat frame!